From: Eduardo Valentin <eduardo.valentin@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <devel@driverdev.osuosl.org>, <linux-omap@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: [PATCH 02/50] staging: omap-thermal: remove unused _SHIFT macros
Date: Fri, 15 Mar 2013 08:59:50 -0400 [thread overview]
Message-ID: <1363352438-15935-3-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1363352438-15935-1-git-send-email-eduardo.valentin@ti.com>
As these macros are not used on any part of the code,
this patch removes all the *_SHIT defines.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/omap-thermal/omap-bandgap.h | 57 ---------------------------
1 files changed, 0 insertions(+), 57 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/omap-thermal/omap-bandgap.h
index 8d3ee2b..5ce1659 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.h
+++ b/drivers/staging/omap-thermal/omap-bandgap.h
@@ -28,19 +28,13 @@
#include <linux/err.h>
/* TEMP_SENSOR OMAP4430 */
-#define OMAP4430_BGAP_TSHUT_SHIFT 11
#define OMAP4430_BGAP_TSHUT_MASK BIT(11)
/* TEMP_SENSOR OMAP4430 */
-#define OMAP4430_BGAP_TEMPSOFF_SHIFT 12
#define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12)
-#define OMAP4430_SINGLE_MODE_SHIFT 10
#define OMAP4430_SINGLE_MODE_MASK BIT(10)
-#define OMAP4430_BGAP_TEMP_SENSOR_SOC_SHIFT 9
#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9)
-#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8)
-#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
#define OMAP4430_ADC_START_VALUE 0
@@ -52,135 +46,84 @@
#define OMAP4430_HYST_VAL 5000
/* TEMP_SENSOR OMAP4460 */
-#define OMAP4460_BGAP_TEMPSOFF_SHIFT 13
#define OMAP4460_BGAP_TEMPSOFF_MASK BIT(13)
-#define OMAP4460_BGAP_TEMP_SENSOR_SOC_SHIFT 11
#define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK BIT(11)
-#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_SHIFT 10
#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(10)
-#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* BANDGAP_CTRL */
-#define OMAP4460_SINGLE_MODE_SHIFT 31
#define OMAP4460_SINGLE_MODE_MASK BIT(31)
-#define OMAP4460_MASK_HOT_SHIFT 1
#define OMAP4460_MASK_HOT_MASK BIT(1)
-#define OMAP4460_MASK_COLD_SHIFT 0
#define OMAP4460_MASK_COLD_MASK BIT(0)
/* BANDGAP_COUNTER */
-#define OMAP4460_COUNTER_SHIFT 0
#define OMAP4460_COUNTER_MASK (0xffffff << 0)
/* BANDGAP_THRESHOLD */
-#define OMAP4460_T_HOT_SHIFT 16
#define OMAP4460_T_HOT_MASK (0x3ff << 16)
-#define OMAP4460_T_COLD_SHIFT 0
#define OMAP4460_T_COLD_MASK (0x3ff << 0)
/* TSHUT_THRESHOLD */
-#define OMAP4460_TSHUT_HOT_SHIFT 16
#define OMAP4460_TSHUT_HOT_MASK (0x3ff << 16)
-#define OMAP4460_TSHUT_COLD_SHIFT 0
#define OMAP4460_TSHUT_COLD_MASK (0x3ff << 0)
/* BANDGAP_STATUS */
-#define OMAP4460_CLEAN_STOP_SHIFT 3
#define OMAP4460_CLEAN_STOP_MASK BIT(3)
-#define OMAP4460_BGAP_ALERT_SHIFT 2
#define OMAP4460_BGAP_ALERT_MASK BIT(2)
-#define OMAP4460_HOT_FLAG_SHIFT 1
#define OMAP4460_HOT_FLAG_MASK BIT(1)
-#define OMAP4460_COLD_FLAG_SHIFT 0
#define OMAP4460_COLD_FLAG_MASK BIT(0)
/* TEMP_SENSOR OMAP5430 */
-#define OMAP5430_BGAP_TEMP_SENSOR_SOC_SHIFT 12
#define OMAP5430_BGAP_TEMP_SENSOR_SOC_MASK BIT(12)
-#define OMAP5430_BGAP_TEMPSOFF_SHIFT 11
#define OMAP5430_BGAP_TEMPSOFF_MASK BIT(11)
-#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_SHIFT 10
#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(10)
-#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* BANDGAP_CTRL */
-#define OMAP5430_MASK_HOT_CORE_SHIFT 5
#define OMAP5430_MASK_HOT_CORE_MASK BIT(5)
-#define OMAP5430_MASK_COLD_CORE_SHIFT 4
#define OMAP5430_MASK_COLD_CORE_MASK BIT(4)
-#define OMAP5430_MASK_HOT_GPU_SHIFT 3
#define OMAP5430_MASK_HOT_GPU_MASK BIT(3)
-#define OMAP5430_MASK_COLD_GPU_SHIFT 2
#define OMAP5430_MASK_COLD_GPU_MASK BIT(2)
-#define OMAP5430_MASK_HOT_MPU_SHIFT 1
#define OMAP5430_MASK_HOT_MPU_MASK BIT(1)
-#define OMAP5430_MASK_COLD_MPU_SHIFT 0
#define OMAP5430_MASK_COLD_MPU_MASK BIT(0)
-#define OMAP5430_MASK_SIDLEMODE_SHIFT 30
#define OMAP5430_MASK_SIDLEMODE_MASK (0x3 << 30)
-#define OMAP5430_MASK_FREEZE_CORE_SHIFT 23
#define OMAP5430_MASK_FREEZE_CORE_MASK BIT(23)
-#define OMAP5430_MASK_FREEZE_GPU_SHIFT 22
#define OMAP5430_MASK_FREEZE_GPU_MASK BIT(22)
-#define OMAP5430_MASK_FREEZE_MPU_SHIFT 21
#define OMAP5430_MASK_FREEZE_MPU_MASK BIT(21)
-#define OMAP5430_MASK_CLEAR_CORE_SHIFT 20
#define OMAP5430_MASK_CLEAR_CORE_MASK BIT(20)
-#define OMAP5430_MASK_CLEAR_GPU_SHIFT 19
#define OMAP5430_MASK_CLEAR_GPU_MASK BIT(19)
-#define OMAP5430_MASK_CLEAR_MPU_SHIFT 18
#define OMAP5430_MASK_CLEAR_MPU_MASK BIT(18)
-#define OMAP5430_MASK_CLEAR_ACCUM_CORE_SHIFT 17
#define OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK BIT(17)
-#define OMAP5430_MASK_CLEAR_ACCUM_GPU_SHIFT 16
#define OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK BIT(16)
-#define OMAP5430_MASK_CLEAR_ACCUM_MPU_SHIFT 15
#define OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK BIT(15)
/* BANDGAP_COUNTER */
-#define OMAP5430_COUNTER_SHIFT 0
#define OMAP5430_COUNTER_MASK (0xffffff << 0)
/* BANDGAP_THRESHOLD */
-#define OMAP5430_T_HOT_SHIFT 16
#define OMAP5430_T_HOT_MASK (0x3ff << 16)
-#define OMAP5430_T_COLD_SHIFT 0
#define OMAP5430_T_COLD_MASK (0x3ff << 0)
/* TSHUT_THRESHOLD */
-#define OMAP5430_TSHUT_HOT_SHIFT 16
#define OMAP5430_TSHUT_HOT_MASK (0x3ff << 16)
-#define OMAP5430_TSHUT_COLD_SHIFT 0
#define OMAP5430_TSHUT_COLD_MASK (0x3ff << 0)
/* BANDGAP_CUMUL_DTEMP_MPU */
-#define OMAP5430_CUMUL_DTEMP_MPU_SHIFT 0
#define OMAP5430_CUMUL_DTEMP_MPU_MASK (0xffffffff << 0)
/* BANDGAP_CUMUL_DTEMP_GPU */
-#define OMAP5430_CUMUL_DTEMP_GPU_SHIFT 0
#define OMAP5430_CUMUL_DTEMP_GPU_MASK (0xffffffff << 0)
/* BANDGAP_CUMUL_DTEMP_CORE */
-#define OMAP5430_CUMUL_DTEMP_CORE_SHIFT 0
#define OMAP5430_CUMUL_DTEMP_CORE_MASK (0xffffffff << 0)
/* BANDGAP_STATUS */
-#define OMAP5430_BGAP_ALERT_SHIFT 31
#define OMAP5430_BGAP_ALERT_MASK BIT(31)
-#define OMAP5430_HOT_CORE_FLAG_SHIFT 5
#define OMAP5430_HOT_CORE_FLAG_MASK BIT(5)
-#define OMAP5430_COLD_CORE_FLAG_SHIFT 4
#define OMAP5430_COLD_CORE_FLAG_MASK BIT(4)
-#define OMAP5430_HOT_GPU_FLAG_SHIFT 3
#define OMAP5430_HOT_GPU_FLAG_MASK BIT(3)
-#define OMAP5430_COLD_GPU_FLAG_SHIFT 2
#define OMAP5430_COLD_GPU_FLAG_MASK BIT(2)
-#define OMAP5430_HOT_MPU_FLAG_SHIFT 1
#define OMAP5430_HOT_MPU_FLAG_MASK BIT(1)
-#define OMAP5430_COLD_MPU_FLAG_SHIFT 0
#define OMAP5430_COLD_MPU_FLAG_MASK BIT(0)
/* Offsets from the base of temperature sensor registers */
--
1.7.7.1.488.ge8e1c
WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, linux-omap@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: [PATCH 02/50] staging: omap-thermal: remove unused _SHIFT macros
Date: Fri, 15 Mar 2013 08:59:50 -0400 [thread overview]
Message-ID: <1363352438-15935-3-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1363352438-15935-1-git-send-email-eduardo.valentin@ti.com>
As these macros are not used on any part of the code,
this patch removes all the *_SHIT defines.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/omap-thermal/omap-bandgap.h | 57 ---------------------------
1 files changed, 0 insertions(+), 57 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/omap-thermal/omap-bandgap.h
index 8d3ee2b..5ce1659 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.h
+++ b/drivers/staging/omap-thermal/omap-bandgap.h
@@ -28,19 +28,13 @@
#include <linux/err.h>
/* TEMP_SENSOR OMAP4430 */
-#define OMAP4430_BGAP_TSHUT_SHIFT 11
#define OMAP4430_BGAP_TSHUT_MASK BIT(11)
/* TEMP_SENSOR OMAP4430 */
-#define OMAP4430_BGAP_TEMPSOFF_SHIFT 12
#define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12)
-#define OMAP4430_SINGLE_MODE_SHIFT 10
#define OMAP4430_SINGLE_MODE_MASK BIT(10)
-#define OMAP4430_BGAP_TEMP_SENSOR_SOC_SHIFT 9
#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9)
-#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8)
-#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
#define OMAP4430_ADC_START_VALUE 0
@@ -52,135 +46,84 @@
#define OMAP4430_HYST_VAL 5000
/* TEMP_SENSOR OMAP4460 */
-#define OMAP4460_BGAP_TEMPSOFF_SHIFT 13
#define OMAP4460_BGAP_TEMPSOFF_MASK BIT(13)
-#define OMAP4460_BGAP_TEMP_SENSOR_SOC_SHIFT 11
#define OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK BIT(11)
-#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_SHIFT 10
#define OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(10)
-#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* BANDGAP_CTRL */
-#define OMAP4460_SINGLE_MODE_SHIFT 31
#define OMAP4460_SINGLE_MODE_MASK BIT(31)
-#define OMAP4460_MASK_HOT_SHIFT 1
#define OMAP4460_MASK_HOT_MASK BIT(1)
-#define OMAP4460_MASK_COLD_SHIFT 0
#define OMAP4460_MASK_COLD_MASK BIT(0)
/* BANDGAP_COUNTER */
-#define OMAP4460_COUNTER_SHIFT 0
#define OMAP4460_COUNTER_MASK (0xffffff << 0)
/* BANDGAP_THRESHOLD */
-#define OMAP4460_T_HOT_SHIFT 16
#define OMAP4460_T_HOT_MASK (0x3ff << 16)
-#define OMAP4460_T_COLD_SHIFT 0
#define OMAP4460_T_COLD_MASK (0x3ff << 0)
/* TSHUT_THRESHOLD */
-#define OMAP4460_TSHUT_HOT_SHIFT 16
#define OMAP4460_TSHUT_HOT_MASK (0x3ff << 16)
-#define OMAP4460_TSHUT_COLD_SHIFT 0
#define OMAP4460_TSHUT_COLD_MASK (0x3ff << 0)
/* BANDGAP_STATUS */
-#define OMAP4460_CLEAN_STOP_SHIFT 3
#define OMAP4460_CLEAN_STOP_MASK BIT(3)
-#define OMAP4460_BGAP_ALERT_SHIFT 2
#define OMAP4460_BGAP_ALERT_MASK BIT(2)
-#define OMAP4460_HOT_FLAG_SHIFT 1
#define OMAP4460_HOT_FLAG_MASK BIT(1)
-#define OMAP4460_COLD_FLAG_SHIFT 0
#define OMAP4460_COLD_FLAG_MASK BIT(0)
/* TEMP_SENSOR OMAP5430 */
-#define OMAP5430_BGAP_TEMP_SENSOR_SOC_SHIFT 12
#define OMAP5430_BGAP_TEMP_SENSOR_SOC_MASK BIT(12)
-#define OMAP5430_BGAP_TEMPSOFF_SHIFT 11
#define OMAP5430_BGAP_TEMPSOFF_MASK BIT(11)
-#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_SHIFT 10
#define OMAP5430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(10)
-#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
#define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* BANDGAP_CTRL */
-#define OMAP5430_MASK_HOT_CORE_SHIFT 5
#define OMAP5430_MASK_HOT_CORE_MASK BIT(5)
-#define OMAP5430_MASK_COLD_CORE_SHIFT 4
#define OMAP5430_MASK_COLD_CORE_MASK BIT(4)
-#define OMAP5430_MASK_HOT_GPU_SHIFT 3
#define OMAP5430_MASK_HOT_GPU_MASK BIT(3)
-#define OMAP5430_MASK_COLD_GPU_SHIFT 2
#define OMAP5430_MASK_COLD_GPU_MASK BIT(2)
-#define OMAP5430_MASK_HOT_MPU_SHIFT 1
#define OMAP5430_MASK_HOT_MPU_MASK BIT(1)
-#define OMAP5430_MASK_COLD_MPU_SHIFT 0
#define OMAP5430_MASK_COLD_MPU_MASK BIT(0)
-#define OMAP5430_MASK_SIDLEMODE_SHIFT 30
#define OMAP5430_MASK_SIDLEMODE_MASK (0x3 << 30)
-#define OMAP5430_MASK_FREEZE_CORE_SHIFT 23
#define OMAP5430_MASK_FREEZE_CORE_MASK BIT(23)
-#define OMAP5430_MASK_FREEZE_GPU_SHIFT 22
#define OMAP5430_MASK_FREEZE_GPU_MASK BIT(22)
-#define OMAP5430_MASK_FREEZE_MPU_SHIFT 21
#define OMAP5430_MASK_FREEZE_MPU_MASK BIT(21)
-#define OMAP5430_MASK_CLEAR_CORE_SHIFT 20
#define OMAP5430_MASK_CLEAR_CORE_MASK BIT(20)
-#define OMAP5430_MASK_CLEAR_GPU_SHIFT 19
#define OMAP5430_MASK_CLEAR_GPU_MASK BIT(19)
-#define OMAP5430_MASK_CLEAR_MPU_SHIFT 18
#define OMAP5430_MASK_CLEAR_MPU_MASK BIT(18)
-#define OMAP5430_MASK_CLEAR_ACCUM_CORE_SHIFT 17
#define OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK BIT(17)
-#define OMAP5430_MASK_CLEAR_ACCUM_GPU_SHIFT 16
#define OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK BIT(16)
-#define OMAP5430_MASK_CLEAR_ACCUM_MPU_SHIFT 15
#define OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK BIT(15)
/* BANDGAP_COUNTER */
-#define OMAP5430_COUNTER_SHIFT 0
#define OMAP5430_COUNTER_MASK (0xffffff << 0)
/* BANDGAP_THRESHOLD */
-#define OMAP5430_T_HOT_SHIFT 16
#define OMAP5430_T_HOT_MASK (0x3ff << 16)
-#define OMAP5430_T_COLD_SHIFT 0
#define OMAP5430_T_COLD_MASK (0x3ff << 0)
/* TSHUT_THRESHOLD */
-#define OMAP5430_TSHUT_HOT_SHIFT 16
#define OMAP5430_TSHUT_HOT_MASK (0x3ff << 16)
-#define OMAP5430_TSHUT_COLD_SHIFT 0
#define OMAP5430_TSHUT_COLD_MASK (0x3ff << 0)
/* BANDGAP_CUMUL_DTEMP_MPU */
-#define OMAP5430_CUMUL_DTEMP_MPU_SHIFT 0
#define OMAP5430_CUMUL_DTEMP_MPU_MASK (0xffffffff << 0)
/* BANDGAP_CUMUL_DTEMP_GPU */
-#define OMAP5430_CUMUL_DTEMP_GPU_SHIFT 0
#define OMAP5430_CUMUL_DTEMP_GPU_MASK (0xffffffff << 0)
/* BANDGAP_CUMUL_DTEMP_CORE */
-#define OMAP5430_CUMUL_DTEMP_CORE_SHIFT 0
#define OMAP5430_CUMUL_DTEMP_CORE_MASK (0xffffffff << 0)
/* BANDGAP_STATUS */
-#define OMAP5430_BGAP_ALERT_SHIFT 31
#define OMAP5430_BGAP_ALERT_MASK BIT(31)
-#define OMAP5430_HOT_CORE_FLAG_SHIFT 5
#define OMAP5430_HOT_CORE_FLAG_MASK BIT(5)
-#define OMAP5430_COLD_CORE_FLAG_SHIFT 4
#define OMAP5430_COLD_CORE_FLAG_MASK BIT(4)
-#define OMAP5430_HOT_GPU_FLAG_SHIFT 3
#define OMAP5430_HOT_GPU_FLAG_MASK BIT(3)
-#define OMAP5430_COLD_GPU_FLAG_SHIFT 2
#define OMAP5430_COLD_GPU_FLAG_MASK BIT(2)
-#define OMAP5430_HOT_MPU_FLAG_SHIFT 1
#define OMAP5430_HOT_MPU_FLAG_MASK BIT(1)
-#define OMAP5430_COLD_MPU_FLAG_SHIFT 0
#define OMAP5430_COLD_MPU_FLAG_MASK BIT(0)
/* Offsets from the base of temperature sensor registers */
--
1.7.7.1.488.ge8e1c
next prev parent reply other threads:[~2013-03-15 13:02 UTC|newest]
Thread overview: 128+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-15 12:59 [PATCH 00/50] staging: omap-thermal: several code refactoring Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` [PATCH 01/50] staging: omap-thermal: use BIT() macro Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin [this message]
2013-03-15 12:59 ` [PATCH 02/50] staging: omap-thermal: remove unused _SHIFT macros Eduardo Valentin
2013-03-15 12:59 ` [PATCH 03/50] staging: omap-thermal: create header for register, bitfields and definitions Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` [PATCH 04/50] staging: omap-thermal: update documentation of omap-bandgap.h Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` [PATCH 05/50] staging: omap-thermal: style cleanup on omap-bandgap.c Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` [PATCH 06/50] staging: omap-thermal: fix error checking Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` [PATCH 07/50] staging: omap-thermal: introduce RMW_BITS macro Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 21:09 ` Dan Carpenter
2013-03-16 12:36 ` Eduardo Valentin
2013-03-16 12:36 ` Eduardo Valentin
2013-03-16 14:00 ` Dan Carpenter
2013-03-15 12:59 ` [PATCH 08/50] staging: omap-thermal: add documentation for register access functions Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` [PATCH 09/50] staging: omap-thermal: make a omap_bandgap_power with only one exit point Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 21:22 ` Dan Carpenter
2013-03-16 12:39 ` Eduardo Valentin
2013-03-16 12:39 ` Eduardo Valentin
2013-03-16 13:56 ` Dan Carpenter
2013-03-15 12:59 ` [PATCH 10/50] staging: omap-thermal: add documentation for omap_bandgap_power Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 12:59 ` [PATCH 11/50] staging: omap-thermal: add documentation for omap_bandgap_read_temp Eduardo Valentin
2013-03-15 12:59 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 12/50] staging: omap-thermal: rename talert handler Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 13/50] staging: omap-thermal: update documentation for talert irq handler Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 14/50] staging: omap-thermal: update tshut IRQ handler documentation Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 15/50] staging: omap-thermal: remove duplicated code Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 16/50] staging: omap-thermal: read status only once inside alert IRQ Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 17/50] staging: omap-thermal: add a section of register manipulation Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 18/50] staging: omap-thermal: section of basic helpers Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 19/50] staging: omap-thermal: IRQ handler section Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 20/50] staging: omap-thermal: ADC section Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 21/50] staging: omap-thermal: name adc_to_temp_conversion in a better way Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 22/50] staging: omap-thermal: rewrite omap_bandgap_adc_to_mcelsius on kernel coding style Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-16 8:27 ` Dan Carpenter
2013-03-16 8:27 ` Dan Carpenter
2013-03-15 13:00 ` [PATCH 23/50] staging: omap-thermal: add documentation for omap_bandgap_adc_to_mcelsius Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 24/50] staging: omap-thermal: name temp_to_adc_conversion in a better way Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 25/50] staging: omap-thermal: rewrite omap_bandgap_mcelsius_to_adc on kernel coding style Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-16 8:33 ` Dan Carpenter
2013-03-15 13:00 ` [PATCH 26/50] staging: omap-thermal: move conv table limits out of sensor data Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 27/50] staging: omap-thermal: add documentation for omap_bandgap_mcelsius_to_adc Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 28/50] staging: omap-thermal: rename add_hyst to omap_bandgap_add_hyst Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 29/50] staging: omap-thermal: document omap_bandgap_add_hyst function Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 30/50] staging: omap-thermal: threshold manipulation section Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 31/50] staging: omap-thermal: refactor temp_sensor_unmask_interrupts Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 32/50] staging: omap-thermal: update omap_bandgap_unmask_interrupts documentation Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 33/50] staging: omap-thermal: refactor APIs handling threshold values Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-16 8:39 ` Dan Carpenter
2013-03-16 12:49 ` Eduardo Valentin
2013-03-16 12:49 ` Eduardo Valentin
2013-03-16 13:58 ` Dan Carpenter
2013-03-15 13:00 ` [PATCH 34/50] staging: omap-thermal: device initialization section Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 35/50] staging: omap-thermal: section of device driver callbacks Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 36/50] staging: omap-thermal: rename enable_continuous_mode Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 37/50] staging: omap-thermal: update omap_bandgap_set_continous_mode documentation Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 38/50] staging: omap-thermal: document omap_bandgap_force_single_read Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 39/50] staging: omap-thermal: document omap_bandgap_update_alert_threshold function Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 40/50] staging: omap-thermal: document _omap_bandgap_write_threshold function Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 41/50] staging: omap-thermal: document _omap_bandgap_read_threshold function Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 42/50] staging: omap-thermal: document omap_bandgap_tshut_init function Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 43/50] staging: omap-thermal: document omap_bandgap_alert_init function Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 44/50] staging: omap-thermal: document omap_bandgap_build function Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 45/50] staging: omap-thermal: change Kconfig dependency method Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 46/50] staging: Add a MAINTAINERS entry for TI bandgap and thermal driver Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 47/50] staging: omap-thermal: switch mutex to spinlock inside omap-bandgap Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-16 8:59 ` Dan Carpenter
2013-03-16 8:59 ` Dan Carpenter
2013-03-16 12:41 ` Eduardo Valentin
2013-03-16 12:41 ` Eduardo Valentin
2013-03-16 14:22 ` Dan Carpenter
2013-03-15 13:00 ` [PATCH 48/50] staging: omap-thermal: remove TODO entry suggesting regmap usage Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 49/50] staging: omap-thermal: remove TODO entry for exposed APIs Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-15 13:00 ` [PATCH 50/50] staging: omap-thermal: add documentation for omap_bandgap_validate Eduardo Valentin
2013-03-15 13:00 ` Eduardo Valentin
2013-03-16 9:05 ` [PATCH 00/50] staging: omap-thermal: several code refactoring Dan Carpenter
2013-03-16 12:46 ` Eduardo Valentin
2013-03-16 12:46 ` Eduardo Valentin
2013-03-16 16:16 ` Greg KH
2013-03-18 14:44 ` Eduardo Valentin
2013-03-18 14:44 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363352438-15935-3-git-send-email-eduardo.valentin@ti.com \
--to=eduardo.valentin@ti.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.