* [PATCHv2 00/12] staging: [omap,ti-soc]-thermal: fixes and renaming
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Hello Greg,
This is version 2 of this series to rename omap-thermal driver
inside staging tree. V1 is found here:
http://lkml.org/lkml/2013/3/18/357
The idea of the series is the same. It includes several fixes, but
the major change is that now the driver will be named ti-soc-thermal,
because it will support not only OMAP chips.
Difference from previous version is that:
. now PATCHv1 02/08 has been dropped (based on discussions),
. PATCHv1 04/08 has been split, to make review process easier
. last tree patch of this series are new fixes.
For those interested in testing and trying the driver, these patches are
also available, as usual, here:
git@gitorious.org:thermal-framework/thermal-framework.git thermal_work/omap/ti-thermal-rename
https://git.gitorious.org/thermal-framework/thermal-framework.git thermal_work/omap/ti-thermal-rename
All best,
Eduardo Valentin (12):
staging: omap-thermal: fix return value
staging: omap-thermal: rename bg_ptr to bgp
staging: rename omap-thermal driver to ti-soc-thermal
staging: ti-soc-thermal: rename Kconfig options
staging: ti-soc-thermal: rename symbols to use better prefix
staging: ti-soc-thermal: make unexported functions local
staging: ti-soc-thermal: split writable data from readonly data
stating: ti-soc-thermal: use sizeof(*pointer) while allocating
staging: ti-soc-thermal: fix several kernel-doc warnings and error
staging: ti-soc-thermal: fix condition to apply hyst
staging: ti-soc-thermal: fix bitfield writing while updating
thresholds
staging: ti-soc-thermal: propagate error code
drivers/staging/Kconfig | 2 +-
drivers/staging/Makefile | 2 +-
drivers/staging/omap-thermal/Makefile | 5 -
drivers/staging/omap-thermal/omap-bandgap.c | 1300 --------------------
drivers/staging/omap-thermal/omap-thermal-common.c | 338 -----
.../{omap-thermal => ti-soc-thermal}/Kconfig | 20 +-
drivers/staging/ti-soc-thermal/Makefile | 5 +
.../staging/{omap-thermal => ti-soc-thermal}/TODO | 4 +-
.../omap4-thermal-data.c | 68 +-
.../omap4xxx-bandgap.h | 0
.../omap5-thermal-data.c | 20 +-
.../omap5xxx-bandgap.h | 0
drivers/staging/ti-soc-thermal/ti-bandgap.c | 1297 +++++++++++++++++++
.../omap-bandgap.h => ti-soc-thermal/ti-bandgap.h} | 190 ++--
drivers/staging/ti-soc-thermal/ti-thermal-common.c | 338 +++++
.../omap-thermal.h => ti-soc-thermal/ti-thermal.h} | 34 +-
.../ti_soc_thermal.txt} | 0
17 files changed, 1813 insertions(+), 1810 deletions(-)
delete mode 100644 drivers/staging/omap-thermal/Makefile
delete mode 100644 drivers/staging/omap-thermal/omap-bandgap.c
delete mode 100644 drivers/staging/omap-thermal/omap-thermal-common.c
rename drivers/staging/{omap-thermal => ti-soc-thermal}/Kconfig (72%)
create mode 100644 drivers/staging/ti-soc-thermal/Makefile
rename drivers/staging/{omap-thermal => ti-soc-thermal}/TODO (90%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap4-thermal-data.c (85%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap4xxx-bandgap.h (100%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap5-thermal-data.c (96%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap5xxx-bandgap.h (100%)
create mode 100644 drivers/staging/ti-soc-thermal/ti-bandgap.c
rename drivers/staging/{omap-thermal/omap-bandgap.h => ti-soc-thermal/ti-bandgap.h} (74%)
create mode 100644 drivers/staging/ti-soc-thermal/ti-thermal-common.c
rename drivers/staging/{omap-thermal/omap-thermal.h => ti-soc-thermal/ti-thermal.h} (71%)
rename drivers/staging/{omap-thermal/omap_bandgap.txt => ti-soc-thermal/ti_soc_thermal.txt} (100%)
--
1.7.7.1.488.ge8e1c
^ permalink raw reply [flat|nested] 35+ messages in thread* [PATCHv2 01/12] staging: omap-thermal: fix return value
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Return the proper error value in _omap_bandgap_read_threshold.
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/omap-thermal/omap-bandgap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c b/drivers/staging/omap-thermal/omap-bandgap.c
index 33bfe3b..cb7aa35 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.c
+++ b/drivers/staging/omap-thermal/omap-bandgap.c
@@ -566,7 +566,7 @@ int _omap_bandgap_read_threshold(struct omap_bandgap *bg_ptr, int id,
*val = temp;
exit:
- return 0;
+ return ret;
}
/*** Exposed APIs ***/
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 01/12] staging: omap-thermal: fix return value
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Return the proper error value in _omap_bandgap_read_threshold.
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/omap-thermal/omap-bandgap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c b/drivers/staging/omap-thermal/omap-bandgap.c
index 33bfe3b..cb7aa35 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.c
+++ b/drivers/staging/omap-thermal/omap-bandgap.c
@@ -566,7 +566,7 @@ int _omap_bandgap_read_threshold(struct omap_bandgap *bg_ptr, int id,
*val = temp;
exit:
- return 0;
+ return ret;
}
/*** Exposed APIs ***/
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 02/12] staging: omap-thermal: rename bg_ptr to bgp
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Benoit, Dan Carpenter
Use a shorter name to bandgap pointer.
Cc: Benoit <b-cousson@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/omap-thermal/omap-bandgap.c | 562 ++++++++++----------
drivers/staging/omap-thermal/omap-bandgap.h | 28 +-
drivers/staging/omap-thermal/omap-thermal-common.c | 50 +-
drivers/staging/omap-thermal/omap-thermal.h | 16 +-
4 files changed, 327 insertions(+), 329 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c b/drivers/staging/omap-thermal/omap-bandgap.c
index cb7aa35..1189ca7 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.c
+++ b/drivers/staging/omap-thermal/omap-bandgap.c
@@ -46,28 +46,28 @@
/**
* omap_bandgap_readl() - simple read helper function
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @reg: desired register (offset) to be read
*
* Helper function to read bandgap registers. It uses the io remapped area.
* Returns the register value.
*/
-static u32 omap_bandgap_readl(struct omap_bandgap *bg_ptr, u32 reg)
+static u32 omap_bandgap_readl(struct omap_bandgap *bgp, u32 reg)
{
- return readl(bg_ptr->base + reg);
+ return readl(bgp->base + reg);
}
/**
* omap_bandgap_writel() - simple write helper function
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @val: desired register value to be written
* @reg: desired register (offset) to be written
*
* Helper function to write bandgap registers. It uses the io remapped area.
*/
-static void omap_bandgap_writel(struct omap_bandgap *bg_ptr, u32 val, u32 reg)
+static void omap_bandgap_writel(struct omap_bandgap *bgp, u32 val, u32 reg)
{
- writel(val, bg_ptr->base + reg);
+ writel(val, bgp->base + reg);
}
/**
@@ -76,38 +76,38 @@ static void omap_bandgap_writel(struct omap_bandgap *bg_ptr, u32 val, u32 reg)
* RMW_BITS() - used to read, modify and update bandgap bitfields.
* The value passed will be shifted.
*/
-#define RMW_BITS(bg_ptr, id, reg, mask, val) \
+#define RMW_BITS(bgp, id, reg, mask, val) \
do { \
struct temp_sensor_registers *t; \
u32 r; \
\
- t = bg_ptr->conf->sensors[(id)].registers; \
- r = omap_bandgap_readl(bg_ptr, t->reg); \
+ t = bgp->conf->sensors[(id)].registers; \
+ r = omap_bandgap_readl(bgp, t->reg); \
r &= ~t->mask; \
r |= (val) << __ffs(t->mask); \
- omap_bandgap_writel(bg_ptr, r, t->reg); \
+ omap_bandgap_writel(bgp, r, t->reg); \
} while (0)
/*** Basic helper functions ***/
/**
* omap_bandgap_power() - controls the power state of a bandgap device
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @on: desired power state (1 - on, 0 - off)
*
* Used to power on/off a bandgap device instance. Only used on those
* that features tempsoff bit.
*/
-static int omap_bandgap_power(struct omap_bandgap *bg_ptr, bool on)
+static int omap_bandgap_power(struct omap_bandgap *bgp, bool on)
{
int i;
- if (!OMAP_BANDGAP_HAS(bg_ptr, POWER_SWITCH))
+ if (!OMAP_BANDGAP_HAS(bgp, POWER_SWITCH))
goto exit;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++)
+ for (i = 0; i < bgp->conf->sensor_count; i++)
/* active on 0 */
- RMW_BITS(bg_ptr, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
+ RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
exit:
return 0;
@@ -115,7 +115,7 @@ exit:
/**
* omap_bandgap_read_temp() - helper function to read sensor temperature
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @id: bandgap sensor id
*
* Function to concentrate the steps to read sensor temperature register.
@@ -123,16 +123,16 @@ exit:
* it might be needed to freeze the bandgap state machine, before fetching
* the register value.
*/
-static u32 omap_bandgap_read_temp(struct omap_bandgap *bg_ptr, int id)
+static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
{
struct temp_sensor_registers *tsr;
u32 temp, reg;
- tsr = bg_ptr->conf->sensors[id].registers;
+ tsr = bgp->conf->sensors[id].registers;
reg = tsr->temp_sensor_ctrl;
- if (OMAP_BANDGAP_HAS(bg_ptr, FREEZE_BIT)) {
- RMW_BITS(bg_ptr, id, bgap_mask_ctrl, mask_freeze_mask, 1);
+ if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+ RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
/*
* In case we cannot read from cur_dtemp / dtemp_0,
* then we read from the last valid temp read
@@ -141,11 +141,11 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bg_ptr, int id)
}
/* read temperature */
- temp = omap_bandgap_readl(bg_ptr, reg);
+ temp = omap_bandgap_readl(bgp, reg);
temp &= tsr->bgap_dtemp_mask;
- if (OMAP_BANDGAP_HAS(bg_ptr, FREEZE_BIT))
- RMW_BITS(bg_ptr, id, bgap_mask_ctrl, mask_freeze_mask, 0);
+ if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT))
+ RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
return temp;
}
@@ -165,15 +165,15 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bg_ptr, int id)
*/
static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
{
- struct omap_bandgap *bg_ptr = data;
+ struct omap_bandgap *bgp = data;
struct temp_sensor_registers *tsr;
u32 t_hot = 0, t_cold = 0, ctrl;
int i;
- spin_lock(&bg_ptr->lock);
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
- tsr = bg_ptr->conf->sensors[i].registers;
- ctrl = omap_bandgap_readl(bg_ptr, tsr->bgap_status);
+ spin_lock(&bgp->lock);
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
+ tsr = bgp->conf->sensors[i].registers;
+ ctrl = omap_bandgap_readl(bgp, tsr->bgap_status);
/* Read the status of t_hot */
t_hot = ctrl & tsr->status_hot_mask;
@@ -184,7 +184,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
if (!t_cold && !t_hot)
continue;
- ctrl = omap_bandgap_readl(bg_ptr, tsr->bgap_mask_ctrl);
+ ctrl = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
/*
* One TALERT interrupt: Two sources
* If the interrupt is due to t_hot then mask t_hot and
@@ -198,18 +198,18 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
ctrl |= tsr->mask_hot_mask;
}
- omap_bandgap_writel(bg_ptr, ctrl, tsr->bgap_mask_ctrl);
+ omap_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
- dev_dbg(bg_ptr->dev,
+ dev_dbg(bgp->dev,
"%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
- __func__, bg_ptr->conf->sensors[i].domain,
+ __func__, bgp->conf->sensors[i].domain,
t_hot, t_cold);
/* report temperature to whom may concern */
- if (bg_ptr->conf->report_temperature)
- bg_ptr->conf->report_temperature(bg_ptr, i);
+ if (bgp->conf->report_temperature)
+ bgp->conf->report_temperature(bgp, i);
}
- spin_unlock(&bg_ptr->lock);
+ spin_unlock(&bgp->lock);
return IRQ_HANDLED;
}
@@ -237,7 +237,7 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
/**
* omap_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @adc_val: value in ADC representation
* @t: address where to write the resulting temperature in mCelsius
*
@@ -246,10 +246,10 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bg_ptr,
+int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bgp,
int adc_val, int *t)
{
- struct omap_bandgap_data *conf = bg_ptr->conf;
+ struct omap_bandgap_data *conf = bgp->conf;
int ret = 0;
/* look up for temperature in the table and return the temperature */
@@ -258,7 +258,7 @@ int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bg_ptr,
goto exit;
}
- *t = bg_ptr->conf->conv_table[adc_val - conf->adc_start_val];
+ *t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
exit:
return ret;
@@ -266,7 +266,7 @@ exit:
/**
* omap_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @temp: value in mCelsius
* @adc: address where to write the resulting temperature in ADC representation
*
@@ -275,11 +275,11 @@ exit:
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_mcelsius_to_adc(struct omap_bandgap *bg_ptr, long temp,
+int omap_bandgap_mcelsius_to_adc(struct omap_bandgap *bgp, long temp,
int *adc)
{
- struct omap_bandgap_data *conf = bg_ptr->conf;
- const int *conv_table = bg_ptr->conf->conv_table;
+ struct omap_bandgap_data *conf = bgp->conf;
+ const int *conv_table = bgp->conf->conv_table;
int high, low, mid, ret = 0;
low = 0;
@@ -307,7 +307,7 @@ exit:
/**
* omap_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @adc_val: temperature value in ADC representation
* @hyst_val: hysteresis value in mCelsius
* @sum: address where to write the resulting temperature (in ADC scale)
@@ -316,7 +316,7 @@ exit:
* Returns 0 on success, -ERANGE otherwise.
*/
static
-int omap_bandgap_add_hyst(struct omap_bandgap *bg_ptr, int adc_val,
+int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val,
int hyst_val, u32 *sum)
{
int temp, ret;
@@ -325,13 +325,13 @@ int omap_bandgap_add_hyst(struct omap_bandgap *bg_ptr, int adc_val,
* Need to add in the mcelsius domain, so we have a temperature
* the conv_table range
*/
- ret = omap_bandgap_adc_to_mcelsius(bg_ptr, adc_val, &temp);
+ ret = omap_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
if (ret < 0)
goto exit;
temp += hyst_val;
- ret = omap_bandgap_mcelsius_to_adc(bg_ptr, temp, sum);
+ ret = omap_bandgap_mcelsius_to_adc(bgp, temp, sum);
exit:
return ret;
@@ -341,24 +341,24 @@ exit:
/**
* omap_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @t_hot: hot temperature value to trigger alert signal
* @t_cold: cold temperature value to trigger alert signal
*
* Checks the requested t_hot and t_cold values and configures the IRQ event
* masks accordingly. Call this function only if bandgap features HAS(TALERT).
*/
-static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
+static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
u32 t_hot, u32 t_cold)
{
struct temp_sensor_registers *tsr;
u32 temp, reg_val;
/* Read the current on die temperature */
- temp = omap_bandgap_read_temp(bg_ptr, id);
+ temp = omap_bandgap_read_temp(bgp, id);
- tsr = bg_ptr->conf->sensors[id].registers;
- reg_val = omap_bandgap_readl(bg_ptr, tsr->bgap_mask_ctrl);
+ tsr = bgp->conf->sensors[id].registers;
+ reg_val = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
if (temp < t_hot)
reg_val |= tsr->mask_hot_mask;
@@ -369,12 +369,12 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
reg_val |= tsr->mask_cold_mask;
else
reg_val &= ~tsr->mask_cold_mask;
- omap_bandgap_writel(bg_ptr, reg_val, tsr->bgap_mask_ctrl);
+ omap_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
}
/**
* omap_bandgap_update_alert_threshold() - sequence to update thresholds
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
* @val: value (ADC) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -387,18 +387,18 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
* Call this function only if bandgap features HAS(TALERT).
*/
static
-int omap_bandgap_update_alert_threshold(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
int val, bool hot)
{
- struct temp_sensor_data *ts_data = bg_ptr->conf->sensors[id].ts_data;
+ struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
struct temp_sensor_registers *tsr;
u32 thresh_val, reg_val, t_hot, t_cold;
int err = 0;
- tsr = bg_ptr->conf->sensors[id].registers;
+ tsr = bgp->conf->sensors[id].registers;
/* obtain the current value */
- thresh_val = omap_bandgap_readl(bg_ptr, tsr->bgap_threshold);
+ thresh_val = omap_bandgap_readl(bgp, tsr->bgap_threshold);
t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
__ffs(tsr->threshold_tcold_mask);
t_hot = (thresh_val & tsr->threshold_thot_mask) >>
@@ -410,11 +410,11 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bg_ptr, int id,
if (t_cold < t_hot) {
if (hot)
- err = omap_bandgap_add_hyst(bg_ptr, t_hot,
+ err = omap_bandgap_add_hyst(bgp, t_hot,
-ts_data->hyst_val,
&t_cold);
else
- err = omap_bandgap_add_hyst(bg_ptr, t_cold,
+ err = omap_bandgap_add_hyst(bgp, t_cold,
ts_data->hyst_val,
&t_hot);
}
@@ -424,39 +424,39 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bg_ptr, int id,
reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask));
reg_val |= thresh_val & ~tsr->threshold_tcold_mask;
reg_val |= (t_cold << __ffs(tsr->threshold_tcold_mask));
- omap_bandgap_writel(bg_ptr, reg_val, tsr->bgap_threshold);
+ omap_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
if (err) {
- dev_err(bg_ptr->dev, "failed to reprogram thot threshold\n");
+ dev_err(bgp->dev, "failed to reprogram thot threshold\n");
err = -EIO;
goto exit;
}
- omap_bandgap_unmask_interrupts(bg_ptr, id, t_hot, t_cold);
+ omap_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
exit:
return err;
}
/**
* omap_bandgap_validate() - helper to check the sanity of a struct omap_bandgap
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
*
* Checks if the bandgap pointer is valid and if the sensor id is also
* applicable.
*/
-static inline int omap_bandgap_validate(struct omap_bandgap *bg_ptr, int id)
+static inline int omap_bandgap_validate(struct omap_bandgap *bgp, int id)
{
int ret = 0;
- if (IS_ERR_OR_NULL(bg_ptr)) {
+ if (IS_ERR_OR_NULL(bgp)) {
pr_err("%s: invalid bandgap pointer\n", __func__);
ret = -EINVAL;
goto exit;
}
- if ((id < 0) || (id >= bg_ptr->conf->sensor_count)) {
- dev_err(bg_ptr->dev, "%s: sensor id out of range (%d)\n",
+ if ((id < 0) || (id >= bgp->conf->sensor_count)) {
+ dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
__func__, id);
ret = -ERANGE;
}
@@ -467,7 +467,7 @@ exit:
/**
* _omap_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -478,7 +478,7 @@ exit:
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_write_threshold(struct omap_bandgap *bg_ptr, int id, int val,
+int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val,
bool hot)
{
struct temp_sensor_data *ts_data;
@@ -486,17 +486,17 @@ int _omap_bandgap_write_threshold(struct omap_bandgap *bg_ptr, int id, int val,
u32 adc_val;
int ret;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
+ if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
- ts_data = bg_ptr->conf->sensors[id].ts_data;
- tsr = bg_ptr->conf->sensors[id].registers;
+ ts_data = bgp->conf->sensors[id].ts_data;
+ tsr = bgp->conf->sensors[id].registers;
if (hot) {
if (val < ts_data->min_temp + ts_data->hyst_val)
ret = -EINVAL;
@@ -508,13 +508,13 @@ int _omap_bandgap_write_threshold(struct omap_bandgap *bg_ptr, int id, int val,
if (ret)
goto exit;
- ret = omap_bandgap_mcelsius_to_adc(bg_ptr, val, &adc_val);
+ ret = omap_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
if (ret < 0)
goto exit;
- spin_lock(&bg_ptr->lock);
- omap_bandgap_update_alert_threshold(bg_ptr, id, adc_val, hot);
- spin_unlock(&bg_ptr->lock);
+ spin_lock(&bgp->lock);
+ omap_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
+ spin_unlock(&bgp->lock);
exit:
return ret;
@@ -522,7 +522,7 @@ exit:
/**
* _omap_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a threshold
* @hot: desired threshold to be read. true if threshold hot, false if
@@ -532,33 +532,33 @@ exit:
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_read_threshold(struct omap_bandgap *bg_ptr, int id,
+int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id,
int *val, bool hot)
{
struct temp_sensor_registers *tsr;
u32 temp, mask;
int ret = 0;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
+ if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
- tsr = bg_ptr->conf->sensors[id].registers;
+ tsr = bgp->conf->sensors[id].registers;
if (hot)
mask = tsr->threshold_thot_mask;
else
mask = tsr->threshold_tcold_mask;
- temp = omap_bandgap_readl(bg_ptr, tsr->bgap_threshold);
+ temp = omap_bandgap_readl(bgp, tsr->bgap_threshold);
temp = (temp & mask) >> __ffs(mask);
- ret |= omap_bandgap_adc_to_mcelsius(bg_ptr, temp, &temp);
+ ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret) {
- dev_err(bg_ptr->dev, "failed to read thot\n");
+ dev_err(bgp->dev, "failed to read thot\n");
ret = -EIO;
goto exit;
}
@@ -573,84 +573,84 @@ exit:
/**
* omap_bandgap_read_thot() - reads sensor current thot
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @thot - resulting current thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_thot(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id,
int *thot)
{
- return _omap_bandgap_read_threshold(bg_ptr, id, thot, true);
+ return _omap_bandgap_read_threshold(bgp, id, thot, true);
}
/**
* omap_bandgap_write_thot() - sets sensor current thot
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_thot(struct omap_bandgap *bg_ptr, int id, int val)
+int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bg_ptr, id, val, true);
+ return _omap_bandgap_write_threshold(bgp, id, val, true);
}
/**
* omap_bandgap_read_tcold() - reads sensor current tcold
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @tcold - resulting current tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_tcold(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id,
int *tcold)
{
- return _omap_bandgap_read_threshold(bg_ptr, id, tcold, false);
+ return _omap_bandgap_read_threshold(bgp, id, tcold, false);
}
/**
* omap_bandgap_write_tcold() - sets the sensor tcold
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_tcold(struct omap_bandgap *bg_ptr, int id, int val)
+int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bg_ptr, id, val, false);
+ return _omap_bandgap_write_threshold(bgp, id, val, false);
}
/**
* omap_bandgap_read_update_interval() - read the sensor update interval
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - resulting update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_update_interval(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
int *interval)
{
struct temp_sensor_registers *tsr;
u32 time;
int ret;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
+ if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
- tsr = bg_ptr->conf->sensors[id].registers;
- time = omap_bandgap_readl(bg_ptr, tsr->bgap_counter);
+ tsr = bgp->conf->sensors[id].registers;
+ time = omap_bandgap_readl(bgp, tsr->bgap_counter);
time = (time & tsr->counter_mask) >> __ffs(tsr->counter_mask);
- time = time * 1000 / bg_ptr->clk_rate;
+ time = time * 1000 / bgp->clk_rate;
*interval = time;
@@ -659,53 +659,53 @@ int omap_bandgap_read_update_interval(struct omap_bandgap *bg_ptr, int id,
/**
* omap_bandgap_write_update_interval() - set the update interval
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - desired update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_update_interval(struct omap_bandgap *bg_ptr,
+int omap_bandgap_write_update_interval(struct omap_bandgap *bgp,
int id, u32 interval)
{
- int ret = omap_bandgap_validate(bg_ptr, id);
+ int ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
+ if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
- interval = interval * bg_ptr->clk_rate / 1000;
- spin_lock(&bg_ptr->lock);
- RMW_BITS(bg_ptr, id, bgap_counter, counter_mask, interval);
- spin_unlock(&bg_ptr->lock);
+ interval = interval * bgp->clk_rate / 1000;
+ spin_lock(&bgp->lock);
+ RMW_BITS(bgp, id, bgap_counter, counter_mask, interval);
+ spin_unlock(&bgp->lock);
return 0;
}
/**
* omap_bandgap_read_temperature() - report current temperature
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @temperature - resulting temperature
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_temperature(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
int *temperature)
{
u32 temp;
int ret;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- spin_lock(&bg_ptr->lock);
- temp = omap_bandgap_read_temp(bg_ptr, id);
- spin_unlock(&bg_ptr->lock);
+ spin_lock(&bgp->lock);
+ temp = omap_bandgap_read_temp(bgp, id);
+ spin_unlock(&bgp->lock);
- ret |= omap_bandgap_adc_to_mcelsius(bg_ptr, temp, &temp);
+ ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
@@ -717,20 +717,20 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bg_ptr, int id,
/**
* omap_bandgap_set_sensor_data() - helper function to store thermal
* framework related data.
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @data - thermal framework related data to be stored
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
void *data)
{
- int ret = omap_bandgap_validate(bg_ptr, id);
+ int ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- bg_ptr->conf->sensors[id].data = data;
+ bgp->conf->sensors[id].data = data;
return 0;
}
@@ -738,71 +738,71 @@ int omap_bandgap_set_sensor_data(struct omap_bandgap *bg_ptr, int id,
/**
* omap_bandgap_get_sensor_data() - helper function to get thermal
* framework related data.
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
*
* returns data stored by set function with sensor id on success or NULL
*/
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bg_ptr, int id)
+void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id)
{
- int ret = omap_bandgap_validate(bg_ptr, id);
+ int ret = omap_bandgap_validate(bgp, id);
if (ret)
return ERR_PTR(ret);
- return bg_ptr->conf->sensors[id].data;
+ return bgp->conf->sensors[id].data;
}
/*** Helper functions used during device initialization ***/
/**
* omap_bandgap_force_single_read() - executes 1 single ADC conversion
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @id: sensor id which it is desired to read 1 temperature
*
* Used to initialize the conversion state machine and set it to a valid
* state. Called during device initialization and context restore events.
*/
static int
-omap_bandgap_force_single_read(struct omap_bandgap *bg_ptr, int id)
+omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id)
{
u32 temp = 0, counter = 1000;
/* Select single conversion mode */
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- RMW_BITS(bg_ptr, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
/* Start of Conversion = 1 */
- RMW_BITS(bg_ptr, id, temp_sensor_ctrl, bgap_soc_mask, 1);
+ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
/* Wait until DTEMP is updated */
- temp = omap_bandgap_read_temp(bg_ptr, id);
+ temp = omap_bandgap_read_temp(bgp, id);
while ((temp == 0) && --counter)
- temp = omap_bandgap_read_temp(bg_ptr, id);
+ temp = omap_bandgap_read_temp(bgp, id);
/* REVISIT: Check correct condition for end of conversion */
/* Start of Conversion = 0 */
- RMW_BITS(bg_ptr, id, temp_sensor_ctrl, bgap_soc_mask, 0);
+ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
return 0;
}
/**
* omap_bandgap_set_continous_mode() - One time enabling of continuous mode
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
* be used for junction temperature monitoring, it is desirable that the
* sensors are operational all the time, so that alerts are generated
* properly.
*/
-static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bg_ptr)
+static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
{
int i;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
/* Perform a single read just before enabling continuous */
- omap_bandgap_force_single_read(bg_ptr, i);
- RMW_BITS(bg_ptr, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
+ omap_bandgap_force_single_read(bgp, i);
+ RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
}
return 0;
@@ -810,7 +810,7 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bg_ptr)
/**
* omap_bandgap_tshut_init() - setup and initialize tshut handling
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TSHUT).
@@ -820,23 +820,21 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bg_ptr)
* one of the bandgap sensors violates the TSHUT high/hot threshold.
* And in that case, the system must go off.
*/
-static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
+static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
struct platform_device *pdev)
{
- int gpio_nr = bg_ptr->tshut_gpio;
+ int gpio_nr = bgp->tshut_gpio;
int status;
/* Request for gpio_86 line */
status = gpio_request(gpio_nr, "tshut");
if (status < 0) {
- dev_err(bg_ptr->dev,
- "Could not request for TSHUT GPIO:%i\n", 86);
+ dev_err(bgp->dev, "Could not request for TSHUT GPIO:%i\n", 86);
return status;
}
status = gpio_direction_input(gpio_nr);
if (status) {
- dev_err(bg_ptr->dev,
- "Cannot set input TSHUT GPIO %d\n", gpio_nr);
+ dev_err(bgp->dev, "Cannot set input TSHUT GPIO %d\n", gpio_nr);
return status;
}
@@ -846,7 +844,7 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
NULL);
if (status) {
gpio_free(gpio_nr);
- dev_err(bg_ptr->dev, "request irq failed for TSHUT");
+ dev_err(bgp->dev, "request irq failed for TSHUT");
}
return 0;
@@ -854,7 +852,7 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
/**
* omap_bandgap_alert_init() - setup and initialize talert handling
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TALERT).
@@ -863,20 +861,20 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
* are violated. In these situation, the driver must reprogram the thresholds,
* accordingly to specified policy.
*/
-static int omap_bandgap_talert_init(struct omap_bandgap *bg_ptr,
+static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
struct platform_device *pdev)
{
int ret;
- bg_ptr->irq = platform_get_irq(pdev, 0);
- if (bg_ptr->irq < 0) {
+ bgp->irq = platform_get_irq(pdev, 0);
+ if (bgp->irq < 0) {
dev_err(&pdev->dev, "get_irq failed\n");
- return bg_ptr->irq;
+ return bgp->irq;
}
- ret = request_threaded_irq(bg_ptr->irq, NULL,
+ ret = request_threaded_irq(bgp->irq, NULL,
omap_bandgap_talert_irq_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- "talert", bg_ptr);
+ "talert", bgp);
if (ret) {
dev_err(&pdev->dev, "Request threaded irq failed.\n");
return ret;
@@ -887,7 +885,7 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bg_ptr,
/**
* omap_bandgap_build() - parse DT and setup a struct omap_bandgap
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @pdev: pointer to device struct platform_device
*
* Used to read the device tree properties accordingly to the bandgap
@@ -899,7 +897,7 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *of_id;
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
struct resource *res;
u32 prop;
int i;
@@ -910,16 +908,16 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
return ERR_PTR(-EINVAL);
}
- bg_ptr = devm_kzalloc(&pdev->dev, sizeof(struct omap_bandgap),
+ bgp = devm_kzalloc(&pdev->dev, sizeof(struct omap_bandgap),
GFP_KERNEL);
- if (!bg_ptr) {
+ if (!bgp) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
}
of_id = of_match_device(of_omap_bandgap_match, &pdev->dev);
if (of_id)
- bg_ptr->conf = of_id->data;
+ bgp->conf = of_id->data;
i = 0;
do {
@@ -930,27 +928,27 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
break;
chunk = devm_ioremap_resource(&pdev->dev, res);
if (i == 0)
- bg_ptr->base = chunk;
+ bgp->base = chunk;
if (IS_ERR(chunk))
return ERR_CAST(chunk);
i++;
} while (res);
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) {
dev_err(&pdev->dev, "missing tshut gpio in device tree\n");
return ERR_PTR(-EINVAL);
}
- bg_ptr->tshut_gpio = prop;
- if (!gpio_is_valid(bg_ptr->tshut_gpio)) {
+ bgp->tshut_gpio = prop;
+ if (!gpio_is_valid(bgp->tshut_gpio)) {
dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
- bg_ptr->tshut_gpio);
+ bgp->tshut_gpio);
return ERR_PTR(-EINVAL);
}
}
- return bg_ptr;
+ return bgp;
}
/*** Device driver call backs ***/
@@ -958,18 +956,18 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
static
int omap_bandgap_probe(struct platform_device *pdev)
{
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
int clk_rate, ret = 0, i;
- bg_ptr = omap_bandgap_build(pdev);
- if (IS_ERR_OR_NULL(bg_ptr)) {
+ bgp = omap_bandgap_build(pdev);
+ if (IS_ERR_OR_NULL(bgp)) {
dev_err(&pdev->dev, "failed to fetch platform data\n");
- return PTR_ERR(bg_ptr);
+ return PTR_ERR(bgp);
}
- bg_ptr->dev = &pdev->dev;
+ bgp->dev = &pdev->dev;
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
- ret = omap_bandgap_tshut_init(bg_ptr, pdev);
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ ret = omap_bandgap_tshut_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize system tshut IRQ\n");
@@ -977,111 +975,111 @@ int omap_bandgap_probe(struct platform_device *pdev)
}
}
- bg_ptr->fclock = clk_get(NULL, bg_ptr->conf->fclock_name);
- ret = IS_ERR_OR_NULL(bg_ptr->fclock);
+ bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
+ ret = IS_ERR_OR_NULL(bgp->fclock);
if (ret) {
dev_err(&pdev->dev, "failed to request fclock reference\n");
goto free_irqs;
}
- bg_ptr->div_clk = clk_get(NULL, bg_ptr->conf->div_ck_name);
- ret = IS_ERR_OR_NULL(bg_ptr->div_clk);
+ bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
+ ret = IS_ERR_OR_NULL(bgp->div_clk);
if (ret) {
dev_err(&pdev->dev,
"failed to request div_ts_ck clock ref\n");
goto free_irqs;
}
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
u32 val;
- tsr = bg_ptr->conf->sensors[i].registers;
+ tsr = bgp->conf->sensors[i].registers;
/*
* check if the efuse has a non-zero value if not
* it is an untrimmed sample and the temperatures
* may not be accurate
*/
- val = omap_bandgap_readl(bg_ptr, tsr->bgap_efuse);
+ val = omap_bandgap_readl(bgp, tsr->bgap_efuse);
if (ret || !val)
dev_info(&pdev->dev,
"Non-trimmed BGAP, Temp not accurate\n");
}
- clk_rate = clk_round_rate(bg_ptr->div_clk,
- bg_ptr->conf->sensors[0].ts_data->max_freq);
- if (clk_rate < bg_ptr->conf->sensors[0].ts_data->min_freq ||
+ clk_rate = clk_round_rate(bgp->div_clk,
+ bgp->conf->sensors[0].ts_data->max_freq);
+ if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq ||
clk_rate == 0xffffffff) {
ret = -ENODEV;
dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
goto put_clks;
}
- ret = clk_set_rate(bg_ptr->div_clk, clk_rate);
+ ret = clk_set_rate(bgp->div_clk, clk_rate);
if (ret)
dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");
- bg_ptr->clk_rate = clk_rate;
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_prepare_enable(bg_ptr->fclock);
+ bgp->clk_rate = clk_rate;
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_prepare_enable(bgp->fclock);
- spin_lock_init(&bg_ptr->lock);
- bg_ptr->dev = &pdev->dev;
- platform_set_drvdata(pdev, bg_ptr);
+ spin_lock_init(&bgp->lock);
+ bgp->dev = &pdev->dev;
+ platform_set_drvdata(pdev, bgp);
- omap_bandgap_power(bg_ptr, true);
+ omap_bandgap_power(bgp, true);
/* Set default counter to 1 for now */
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- for (i = 0; i < bg_ptr->conf->sensor_count; i++)
- RMW_BITS(bg_ptr, i, bgap_counter, counter_mask, 1);
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ for (i = 0; i < bgp->conf->sensor_count; i++)
+ RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);
/* Set default thresholds for alert and shutdown */
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_data *ts_data;
- ts_data = bg_ptr->conf->sensors[i].ts_data;
+ ts_data = bgp->conf->sensors[i].ts_data;
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
/* Set initial Talert thresholds */
- RMW_BITS(bg_ptr, i, bgap_threshold,
+ RMW_BITS(bgp, i, bgap_threshold,
threshold_tcold_mask, ts_data->t_cold);
- RMW_BITS(bg_ptr, i, bgap_threshold,
+ RMW_BITS(bgp, i, bgap_threshold,
threshold_thot_mask, ts_data->t_hot);
/* Enable the alert events */
- RMW_BITS(bg_ptr, i, bgap_mask_ctrl, mask_hot_mask, 1);
- RMW_BITS(bg_ptr, i, bgap_mask_ctrl, mask_cold_mask, 1);
+ RMW_BITS(bgp, i, bgap_mask_ctrl, mask_hot_mask, 1);
+ RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
}
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG)) {
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
/* Set initial Tshut thresholds */
- RMW_BITS(bg_ptr, i, tshut_threshold,
+ RMW_BITS(bgp, i, tshut_threshold,
tshut_hot_mask, ts_data->tshut_hot);
- RMW_BITS(bg_ptr, i, tshut_threshold,
+ RMW_BITS(bgp, i, tshut_threshold,
tshut_cold_mask, ts_data->tshut_cold);
}
}
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- omap_bandgap_set_continuous_mode(bg_ptr);
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ omap_bandgap_set_continuous_mode(bgp);
/* Set .250 seconds time as default counter */
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- for (i = 0; i < bg_ptr->conf->sensor_count; i++)
- RMW_BITS(bg_ptr, i, bgap_counter, counter_mask,
- bg_ptr->clk_rate / 4);
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ for (i = 0; i < bgp->conf->sensor_count; i++)
+ RMW_BITS(bgp, i, bgap_counter, counter_mask,
+ bgp->clk_rate / 4);
/* Every thing is good? Then expose the sensors */
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
char *domain;
- if (bg_ptr->conf->sensors[i].register_cooling)
- bg_ptr->conf->sensors[i].register_cooling(bg_ptr, i);
+ if (bgp->conf->sensors[i].register_cooling)
+ bgp->conf->sensors[i].register_cooling(bgp, i);
- domain = bg_ptr->conf->sensors[i].domain;
- if (bg_ptr->conf->expose_sensor)
- bg_ptr->conf->expose_sensor(bg_ptr, i, domain);
+ domain = bgp->conf->sensors[i].domain;
+ if (bgp->conf->expose_sensor)
+ bgp->conf->expose_sensor(bgp, i, domain);
}
/*
@@ -1089,11 +1087,11 @@ int omap_bandgap_probe(struct platform_device *pdev)
* might be called as soon as it is enabled where as rest of framework
* is still getting initialised.
*/
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- ret = omap_bandgap_talert_init(bg_ptr, pdev);
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ ret = omap_bandgap_talert_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
- i = bg_ptr->conf->sensor_count;
+ i = bgp->conf->sensor_count;
goto disable_clk;
}
}
@@ -1101,15 +1099,15 @@ int omap_bandgap_probe(struct platform_device *pdev)
return 0;
disable_clk:
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_disable_unprepare(bg_ptr->fclock);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_disable_unprepare(bgp->fclock);
put_clks:
- clk_put(bg_ptr->fclock);
- clk_put(bg_ptr->div_clk);
+ clk_put(bgp->fclock);
+ clk_put(bgp->div_clk);
free_irqs:
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
- free_irq(gpio_to_irq(bg_ptr->tshut_gpio), NULL);
- gpio_free(bg_ptr->tshut_gpio);
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
+ gpio_free(bgp->tshut_gpio);
}
return ret;
@@ -1118,102 +1116,102 @@ free_irqs:
static
int omap_bandgap_remove(struct platform_device *pdev)
{
- struct omap_bandgap *bg_ptr = platform_get_drvdata(pdev);
+ struct omap_bandgap *bgp = platform_get_drvdata(pdev);
int i;
/* First thing is to remove sensor interfaces */
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
- if (bg_ptr->conf->sensors[i].register_cooling)
- bg_ptr->conf->sensors[i].unregister_cooling(bg_ptr, i);
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
+ if (bgp->conf->sensors[i].register_cooling)
+ bgp->conf->sensors[i].unregister_cooling(bgp, i);
- if (bg_ptr->conf->remove_sensor)
- bg_ptr->conf->remove_sensor(bg_ptr, i);
+ if (bgp->conf->remove_sensor)
+ bgp->conf->remove_sensor(bgp, i);
}
- omap_bandgap_power(bg_ptr, false);
+ omap_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_disable_unprepare(bg_ptr->fclock);
- clk_put(bg_ptr->fclock);
- clk_put(bg_ptr->div_clk);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_disable_unprepare(bgp->fclock);
+ clk_put(bgp->fclock);
+ clk_put(bgp->div_clk);
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT))
- free_irq(bg_ptr->irq, bg_ptr);
+ if (OMAP_BANDGAP_HAS(bgp, TALERT))
+ free_irq(bgp->irq, bgp);
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
- free_irq(gpio_to_irq(bg_ptr->tshut_gpio), NULL);
- gpio_free(bg_ptr->tshut_gpio);
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
+ gpio_free(bgp->tshut_gpio);
}
return 0;
}
#ifdef CONFIG_PM
-static int omap_bandgap_save_ctxt(struct omap_bandgap *bg_ptr)
+static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp)
{
int i;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
- rval = &bg_ptr->conf->sensors[i].regval;
- tsr = bg_ptr->conf->sensors[i].registers;
+ rval = &bgp->conf->sensors[i].regval;
+ tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- rval->bg_mode_ctrl = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ rval->bg_mode_ctrl = omap_bandgap_readl(bgp,
tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- rval->bg_counter = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ rval->bg_counter = omap_bandgap_readl(bgp,
tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- rval->bg_threshold = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ rval->bg_threshold = omap_bandgap_readl(bgp,
tsr->bgap_threshold);
- rval->bg_ctrl = omap_bandgap_readl(bg_ptr,
+ rval->bg_ctrl = omap_bandgap_readl(bgp,
tsr->bgap_mask_ctrl);
}
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG))
- rval->tshut_threshold = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ rval->tshut_threshold = omap_bandgap_readl(bgp,
tsr->tshut_threshold);
}
return 0;
}
-static int omap_bandgap_restore_ctxt(struct omap_bandgap *bg_ptr)
+static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp)
{
int i;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
u32 val = 0;
- rval = &bg_ptr->conf->sensors[i].regval;
- tsr = bg_ptr->conf->sensors[i].registers;
+ rval = &bgp->conf->sensors[i].regval;
+ tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- val = omap_bandgap_readl(bg_ptr, tsr->bgap_counter);
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ val = omap_bandgap_readl(bgp, tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG))
- omap_bandgap_writel(bg_ptr, rval->tshut_threshold,
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ omap_bandgap_writel(bgp, rval->tshut_threshold,
tsr->tshut_threshold);
/* Force immediate temperature measurement and update
* of the DTEMP field
*/
- omap_bandgap_force_single_read(bg_ptr, i);
+ omap_bandgap_force_single_read(bgp, i);
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- omap_bandgap_writel(bg_ptr, rval->bg_counter,
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ omap_bandgap_writel(bgp, rval->bg_counter,
tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- omap_bandgap_writel(bg_ptr, rval->bg_mode_ctrl,
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ omap_bandgap_writel(bgp, rval->bg_mode_ctrl,
tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- omap_bandgap_writel(bg_ptr, rval->bg_threshold,
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ omap_bandgap_writel(bgp, rval->bg_threshold,
tsr->bgap_threshold);
- omap_bandgap_writel(bg_ptr, rval->bg_ctrl,
+ omap_bandgap_writel(bgp, rval->bg_ctrl,
tsr->bgap_mask_ctrl);
}
}
@@ -1223,28 +1221,28 @@ static int omap_bandgap_restore_ctxt(struct omap_bandgap *bg_ptr)
static int omap_bandgap_suspend(struct device *dev)
{
- struct omap_bandgap *bg_ptr = dev_get_drvdata(dev);
+ struct omap_bandgap *bgp = dev_get_drvdata(dev);
int err;
- err = omap_bandgap_save_ctxt(bg_ptr);
- omap_bandgap_power(bg_ptr, false);
+ err = omap_bandgap_save_ctxt(bgp);
+ omap_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_disable_unprepare(bg_ptr->fclock);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_disable_unprepare(bgp->fclock);
return err;
}
static int omap_bandgap_resume(struct device *dev)
{
- struct omap_bandgap *bg_ptr = dev_get_drvdata(dev);
+ struct omap_bandgap *bgp = dev_get_drvdata(dev);
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_prepare_enable(bg_ptr->fclock);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_prepare_enable(bgp->fclock);
- omap_bandgap_power(bg_ptr, true);
+ omap_bandgap_power(bgp, true);
- return omap_bandgap_restore_ctxt(bg_ptr);
+ return omap_bandgap_restore_ctxt(bgp);
}
static const struct dev_pm_ops omap_bandgap_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(omap_bandgap_suspend,
diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/omap-thermal/omap-bandgap.h
index 5700586..ad83be8 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.h
+++ b/drivers/staging/omap-thermal/omap-bandgap.h
@@ -269,8 +269,8 @@ struct omap_temp_sensor {
const int slope_pcb;
const int constant_pcb;
void *data;
- int (*register_cooling)(struct omap_bandgap *bg_ptr, int id);
- int (*unregister_cooling)(struct omap_bandgap *bg_ptr, int id);
+ int (*register_cooling)(struct omap_bandgap *bgp, int id);
+ int (*unregister_cooling)(struct omap_bandgap *bgp, int id);
};
/**
@@ -345,27 +345,27 @@ struct omap_bandgap_data {
char *fclock_name;
char *div_ck_name;
int sensor_count;
- int (*report_temperature)(struct omap_bandgap *bg_ptr, int id);
- int (*expose_sensor)(struct omap_bandgap *bg_ptr, int id, char *domain);
- int (*remove_sensor)(struct omap_bandgap *bg_ptr, int id);
+ int (*report_temperature)(struct omap_bandgap *bgp, int id);
+ int (*expose_sensor)(struct omap_bandgap *bgp, int id, char *domain);
+ int (*remove_sensor)(struct omap_bandgap *bgp, int id);
/* this needs to be at the end */
struct omap_temp_sensor sensors[];
};
-int omap_bandgap_read_thot(struct omap_bandgap *bg_ptr, int id, int *thot);
-int omap_bandgap_write_thot(struct omap_bandgap *bg_ptr, int id, int val);
-int omap_bandgap_read_tcold(struct omap_bandgap *bg_ptr, int id, int *tcold);
-int omap_bandgap_write_tcold(struct omap_bandgap *bg_ptr, int id, int val);
-int omap_bandgap_read_update_interval(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id, int *thot);
+int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val);
+int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id, int *tcold);
+int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val);
+int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
int *interval);
-int omap_bandgap_write_update_interval(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, int id,
u32 interval);
-int omap_bandgap_read_temperature(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
int *temperature);
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
void *data);
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bg_ptr, int id);
+void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id);
#ifdef CONFIG_OMAP4_THERMAL
extern const struct omap_bandgap_data omap4430_data;
diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c
index 8aebc6a..9f7a77b 100644
--- a/drivers/staging/omap-thermal/omap-thermal-common.c
+++ b/drivers/staging/omap-thermal/omap-thermal-common.c
@@ -39,7 +39,7 @@
struct omap_thermal_data {
struct thermal_zone_device *omap_thermal;
struct thermal_cooling_device *cool_dev;
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
enum thermal_device_mode mode;
struct work_struct thermal_wq;
int sensor_id;
@@ -78,17 +78,17 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct omap_thermal_data *data = thermal->devdata;
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
struct omap_temp_sensor *s;
int ret, tmp, pcb_temp, slope, constant;
if (!data)
return 0;
- bg_ptr = data->bg_ptr;
- s = &bg_ptr->conf->sensors[data->sensor_id];
+ bgp = data->bgp;
+ s = &bgp->conf->sensors[data->sensor_id];
- ret = omap_bandgap_read_temperature(bg_ptr, data->sensor_id, &tmp);
+ ret = omap_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
if (ret)
return ret;
@@ -236,32 +236,32 @@ static struct thermal_zone_device_ops omap_thermal_ops = {
};
static struct omap_thermal_data
-*omap_thermal_build_data(struct omap_bandgap *bg_ptr, int id)
+*omap_thermal_build_data(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = devm_kzalloc(bg_ptr->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
- dev_err(bg_ptr->dev, "kzalloc fail\n");
+ dev_err(bgp->dev, "kzalloc fail\n");
return NULL;
}
data->sensor_id = id;
- data->bg_ptr = bg_ptr;
+ data->bgp = bgp;
data->mode = THERMAL_DEVICE_ENABLED;
INIT_WORK(&data->thermal_wq, omap_thermal_work);
return data;
}
-int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bg_ptr, id);
+ data = omap_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
@@ -273,44 +273,44 @@ int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
NULL, FAST_TEMP_MONITORING_RATE,
FAST_TEMP_MONITORING_RATE);
if (IS_ERR_OR_NULL(data->omap_thermal)) {
- dev_err(bg_ptr->dev, "thermal zone device is NULL\n");
+ dev_err(bgp->dev, "thermal zone device is NULL\n");
return PTR_ERR(data->omap_thermal);
}
data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
- omap_bandgap_set_sensor_data(bg_ptr, id, data);
+ omap_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
thermal_zone_device_unregister(data->omap_thermal);
return 0;
}
-int omap_thermal_report_sensor_temperature(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_report_sensor_temperature(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
schedule_work(&data->thermal_wq);
return 0;
}
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bg_ptr, id);
+ data = omap_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
@@ -318,20 +318,20 @@ int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
/* Register cooling device */
data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR_OR_NULL(data->cool_dev)) {
- dev_err(bg_ptr->dev,
+ dev_err(bgp->dev,
"Failed to register cpufreq cooling device\n");
return PTR_ERR(data->cool_dev);
}
- omap_bandgap_set_sensor_data(bg_ptr, id, data);
+ omap_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
cpufreq_cooling_unregister(data->cool_dev);
return 0;
diff --git a/drivers/staging/omap-thermal/omap-thermal.h b/drivers/staging/omap-thermal/omap-thermal.h
index 0dd2184..26cfc8d 100644
--- a/drivers/staging/omap-thermal/omap-thermal.h
+++ b/drivers/staging/omap-thermal/omap-thermal.h
@@ -74,33 +74,33 @@
((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
#ifdef CONFIG_OMAP_THERMAL
-int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain);
-int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id);
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id);
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id);
+int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id);
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id);
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id);
#else
static inline
-int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain)
{
return 0;
}
static inline
-int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
{
return 0;
}
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 02/12] staging: omap-thermal: rename bg_ptr to bgp
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Benoit, Dan Carpenter
Use a shorter name to bandgap pointer.
Cc: Benoit <b-cousson@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/omap-thermal/omap-bandgap.c | 562 ++++++++++----------
drivers/staging/omap-thermal/omap-bandgap.h | 28 +-
drivers/staging/omap-thermal/omap-thermal-common.c | 50 +-
drivers/staging/omap-thermal/omap-thermal.h | 16 +-
4 files changed, 327 insertions(+), 329 deletions(-)
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c b/drivers/staging/omap-thermal/omap-bandgap.c
index cb7aa35..1189ca7 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.c
+++ b/drivers/staging/omap-thermal/omap-bandgap.c
@@ -46,28 +46,28 @@
/**
* omap_bandgap_readl() - simple read helper function
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @reg: desired register (offset) to be read
*
* Helper function to read bandgap registers. It uses the io remapped area.
* Returns the register value.
*/
-static u32 omap_bandgap_readl(struct omap_bandgap *bg_ptr, u32 reg)
+static u32 omap_bandgap_readl(struct omap_bandgap *bgp, u32 reg)
{
- return readl(bg_ptr->base + reg);
+ return readl(bgp->base + reg);
}
/**
* omap_bandgap_writel() - simple write helper function
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @val: desired register value to be written
* @reg: desired register (offset) to be written
*
* Helper function to write bandgap registers. It uses the io remapped area.
*/
-static void omap_bandgap_writel(struct omap_bandgap *bg_ptr, u32 val, u32 reg)
+static void omap_bandgap_writel(struct omap_bandgap *bgp, u32 val, u32 reg)
{
- writel(val, bg_ptr->base + reg);
+ writel(val, bgp->base + reg);
}
/**
@@ -76,38 +76,38 @@ static void omap_bandgap_writel(struct omap_bandgap *bg_ptr, u32 val, u32 reg)
* RMW_BITS() - used to read, modify and update bandgap bitfields.
* The value passed will be shifted.
*/
-#define RMW_BITS(bg_ptr, id, reg, mask, val) \
+#define RMW_BITS(bgp, id, reg, mask, val) \
do { \
struct temp_sensor_registers *t; \
u32 r; \
\
- t = bg_ptr->conf->sensors[(id)].registers; \
- r = omap_bandgap_readl(bg_ptr, t->reg); \
+ t = bgp->conf->sensors[(id)].registers; \
+ r = omap_bandgap_readl(bgp, t->reg); \
r &= ~t->mask; \
r |= (val) << __ffs(t->mask); \
- omap_bandgap_writel(bg_ptr, r, t->reg); \
+ omap_bandgap_writel(bgp, r, t->reg); \
} while (0)
/*** Basic helper functions ***/
/**
* omap_bandgap_power() - controls the power state of a bandgap device
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @on: desired power state (1 - on, 0 - off)
*
* Used to power on/off a bandgap device instance. Only used on those
* that features tempsoff bit.
*/
-static int omap_bandgap_power(struct omap_bandgap *bg_ptr, bool on)
+static int omap_bandgap_power(struct omap_bandgap *bgp, bool on)
{
int i;
- if (!OMAP_BANDGAP_HAS(bg_ptr, POWER_SWITCH))
+ if (!OMAP_BANDGAP_HAS(bgp, POWER_SWITCH))
goto exit;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++)
+ for (i = 0; i < bgp->conf->sensor_count; i++)
/* active on 0 */
- RMW_BITS(bg_ptr, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
+ RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
exit:
return 0;
@@ -115,7 +115,7 @@ exit:
/**
* omap_bandgap_read_temp() - helper function to read sensor temperature
- * @bg_ptr: pointer to omap_bandgap structure
+ * @bgp: pointer to omap_bandgap structure
* @id: bandgap sensor id
*
* Function to concentrate the steps to read sensor temperature register.
@@ -123,16 +123,16 @@ exit:
* it might be needed to freeze the bandgap state machine, before fetching
* the register value.
*/
-static u32 omap_bandgap_read_temp(struct omap_bandgap *bg_ptr, int id)
+static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
{
struct temp_sensor_registers *tsr;
u32 temp, reg;
- tsr = bg_ptr->conf->sensors[id].registers;
+ tsr = bgp->conf->sensors[id].registers;
reg = tsr->temp_sensor_ctrl;
- if (OMAP_BANDGAP_HAS(bg_ptr, FREEZE_BIT)) {
- RMW_BITS(bg_ptr, id, bgap_mask_ctrl, mask_freeze_mask, 1);
+ if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+ RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
/*
* In case we cannot read from cur_dtemp / dtemp_0,
* then we read from the last valid temp read
@@ -141,11 +141,11 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bg_ptr, int id)
}
/* read temperature */
- temp = omap_bandgap_readl(bg_ptr, reg);
+ temp = omap_bandgap_readl(bgp, reg);
temp &= tsr->bgap_dtemp_mask;
- if (OMAP_BANDGAP_HAS(bg_ptr, FREEZE_BIT))
- RMW_BITS(bg_ptr, id, bgap_mask_ctrl, mask_freeze_mask, 0);
+ if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT))
+ RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
return temp;
}
@@ -165,15 +165,15 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bg_ptr, int id)
*/
static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
{
- struct omap_bandgap *bg_ptr = data;
+ struct omap_bandgap *bgp = data;
struct temp_sensor_registers *tsr;
u32 t_hot = 0, t_cold = 0, ctrl;
int i;
- spin_lock(&bg_ptr->lock);
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
- tsr = bg_ptr->conf->sensors[i].registers;
- ctrl = omap_bandgap_readl(bg_ptr, tsr->bgap_status);
+ spin_lock(&bgp->lock);
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
+ tsr = bgp->conf->sensors[i].registers;
+ ctrl = omap_bandgap_readl(bgp, tsr->bgap_status);
/* Read the status of t_hot */
t_hot = ctrl & tsr->status_hot_mask;
@@ -184,7 +184,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
if (!t_cold && !t_hot)
continue;
- ctrl = omap_bandgap_readl(bg_ptr, tsr->bgap_mask_ctrl);
+ ctrl = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
/*
* One TALERT interrupt: Two sources
* If the interrupt is due to t_hot then mask t_hot and
@@ -198,18 +198,18 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
ctrl |= tsr->mask_hot_mask;
}
- omap_bandgap_writel(bg_ptr, ctrl, tsr->bgap_mask_ctrl);
+ omap_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
- dev_dbg(bg_ptr->dev,
+ dev_dbg(bgp->dev,
"%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
- __func__, bg_ptr->conf->sensors[i].domain,
+ __func__, bgp->conf->sensors[i].domain,
t_hot, t_cold);
/* report temperature to whom may concern */
- if (bg_ptr->conf->report_temperature)
- bg_ptr->conf->report_temperature(bg_ptr, i);
+ if (bgp->conf->report_temperature)
+ bgp->conf->report_temperature(bgp, i);
}
- spin_unlock(&bg_ptr->lock);
+ spin_unlock(&bgp->lock);
return IRQ_HANDLED;
}
@@ -237,7 +237,7 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
/**
* omap_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @adc_val: value in ADC representation
* @t: address where to write the resulting temperature in mCelsius
*
@@ -246,10 +246,10 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bg_ptr,
+int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bgp,
int adc_val, int *t)
{
- struct omap_bandgap_data *conf = bg_ptr->conf;
+ struct omap_bandgap_data *conf = bgp->conf;
int ret = 0;
/* look up for temperature in the table and return the temperature */
@@ -258,7 +258,7 @@ int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bg_ptr,
goto exit;
}
- *t = bg_ptr->conf->conv_table[adc_val - conf->adc_start_val];
+ *t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
exit:
return ret;
@@ -266,7 +266,7 @@ exit:
/**
* omap_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @temp: value in mCelsius
* @adc: address where to write the resulting temperature in ADC representation
*
@@ -275,11 +275,11 @@ exit:
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_mcelsius_to_adc(struct omap_bandgap *bg_ptr, long temp,
+int omap_bandgap_mcelsius_to_adc(struct omap_bandgap *bgp, long temp,
int *adc)
{
- struct omap_bandgap_data *conf = bg_ptr->conf;
- const int *conv_table = bg_ptr->conf->conv_table;
+ struct omap_bandgap_data *conf = bgp->conf;
+ const int *conv_table = bgp->conf->conv_table;
int high, low, mid, ret = 0;
low = 0;
@@ -307,7 +307,7 @@ exit:
/**
* omap_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @adc_val: temperature value in ADC representation
* @hyst_val: hysteresis value in mCelsius
* @sum: address where to write the resulting temperature (in ADC scale)
@@ -316,7 +316,7 @@ exit:
* Returns 0 on success, -ERANGE otherwise.
*/
static
-int omap_bandgap_add_hyst(struct omap_bandgap *bg_ptr, int adc_val,
+int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val,
int hyst_val, u32 *sum)
{
int temp, ret;
@@ -325,13 +325,13 @@ int omap_bandgap_add_hyst(struct omap_bandgap *bg_ptr, int adc_val,
* Need to add in the mcelsius domain, so we have a temperature
* the conv_table range
*/
- ret = omap_bandgap_adc_to_mcelsius(bg_ptr, adc_val, &temp);
+ ret = omap_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
if (ret < 0)
goto exit;
temp += hyst_val;
- ret = omap_bandgap_mcelsius_to_adc(bg_ptr, temp, sum);
+ ret = omap_bandgap_mcelsius_to_adc(bgp, temp, sum);
exit:
return ret;
@@ -341,24 +341,24 @@ exit:
/**
* omap_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @t_hot: hot temperature value to trigger alert signal
* @t_cold: cold temperature value to trigger alert signal
*
* Checks the requested t_hot and t_cold values and configures the IRQ event
* masks accordingly. Call this function only if bandgap features HAS(TALERT).
*/
-static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
+static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
u32 t_hot, u32 t_cold)
{
struct temp_sensor_registers *tsr;
u32 temp, reg_val;
/* Read the current on die temperature */
- temp = omap_bandgap_read_temp(bg_ptr, id);
+ temp = omap_bandgap_read_temp(bgp, id);
- tsr = bg_ptr->conf->sensors[id].registers;
- reg_val = omap_bandgap_readl(bg_ptr, tsr->bgap_mask_ctrl);
+ tsr = bgp->conf->sensors[id].registers;
+ reg_val = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
if (temp < t_hot)
reg_val |= tsr->mask_hot_mask;
@@ -369,12 +369,12 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
reg_val |= tsr->mask_cold_mask;
else
reg_val &= ~tsr->mask_cold_mask;
- omap_bandgap_writel(bg_ptr, reg_val, tsr->bgap_mask_ctrl);
+ omap_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
}
/**
* omap_bandgap_update_alert_threshold() - sequence to update thresholds
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
* @val: value (ADC) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -387,18 +387,18 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bg_ptr, int id,
* Call this function only if bandgap features HAS(TALERT).
*/
static
-int omap_bandgap_update_alert_threshold(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
int val, bool hot)
{
- struct temp_sensor_data *ts_data = bg_ptr->conf->sensors[id].ts_data;
+ struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
struct temp_sensor_registers *tsr;
u32 thresh_val, reg_val, t_hot, t_cold;
int err = 0;
- tsr = bg_ptr->conf->sensors[id].registers;
+ tsr = bgp->conf->sensors[id].registers;
/* obtain the current value */
- thresh_val = omap_bandgap_readl(bg_ptr, tsr->bgap_threshold);
+ thresh_val = omap_bandgap_readl(bgp, tsr->bgap_threshold);
t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
__ffs(tsr->threshold_tcold_mask);
t_hot = (thresh_val & tsr->threshold_thot_mask) >>
@@ -410,11 +410,11 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bg_ptr, int id,
if (t_cold < t_hot) {
if (hot)
- err = omap_bandgap_add_hyst(bg_ptr, t_hot,
+ err = omap_bandgap_add_hyst(bgp, t_hot,
-ts_data->hyst_val,
&t_cold);
else
- err = omap_bandgap_add_hyst(bg_ptr, t_cold,
+ err = omap_bandgap_add_hyst(bgp, t_cold,
ts_data->hyst_val,
&t_hot);
}
@@ -424,39 +424,39 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bg_ptr, int id,
reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask));
reg_val |= thresh_val & ~tsr->threshold_tcold_mask;
reg_val |= (t_cold << __ffs(tsr->threshold_tcold_mask));
- omap_bandgap_writel(bg_ptr, reg_val, tsr->bgap_threshold);
+ omap_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
if (err) {
- dev_err(bg_ptr->dev, "failed to reprogram thot threshold\n");
+ dev_err(bgp->dev, "failed to reprogram thot threshold\n");
err = -EIO;
goto exit;
}
- omap_bandgap_unmask_interrupts(bg_ptr, id, t_hot, t_cold);
+ omap_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
exit:
return err;
}
/**
* omap_bandgap_validate() - helper to check the sanity of a struct omap_bandgap
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
*
* Checks if the bandgap pointer is valid and if the sensor id is also
* applicable.
*/
-static inline int omap_bandgap_validate(struct omap_bandgap *bg_ptr, int id)
+static inline int omap_bandgap_validate(struct omap_bandgap *bgp, int id)
{
int ret = 0;
- if (IS_ERR_OR_NULL(bg_ptr)) {
+ if (IS_ERR_OR_NULL(bgp)) {
pr_err("%s: invalid bandgap pointer\n", __func__);
ret = -EINVAL;
goto exit;
}
- if ((id < 0) || (id >= bg_ptr->conf->sensor_count)) {
- dev_err(bg_ptr->dev, "%s: sensor id out of range (%d)\n",
+ if ((id < 0) || (id >= bgp->conf->sensor_count)) {
+ dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
__func__, id);
ret = -ERANGE;
}
@@ -467,7 +467,7 @@ exit:
/**
* _omap_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -478,7 +478,7 @@ exit:
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_write_threshold(struct omap_bandgap *bg_ptr, int id, int val,
+int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val,
bool hot)
{
struct temp_sensor_data *ts_data;
@@ -486,17 +486,17 @@ int _omap_bandgap_write_threshold(struct omap_bandgap *bg_ptr, int id, int val,
u32 adc_val;
int ret;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
+ if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
- ts_data = bg_ptr->conf->sensors[id].ts_data;
- tsr = bg_ptr->conf->sensors[id].registers;
+ ts_data = bgp->conf->sensors[id].ts_data;
+ tsr = bgp->conf->sensors[id].registers;
if (hot) {
if (val < ts_data->min_temp + ts_data->hyst_val)
ret = -EINVAL;
@@ -508,13 +508,13 @@ int _omap_bandgap_write_threshold(struct omap_bandgap *bg_ptr, int id, int val,
if (ret)
goto exit;
- ret = omap_bandgap_mcelsius_to_adc(bg_ptr, val, &adc_val);
+ ret = omap_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
if (ret < 0)
goto exit;
- spin_lock(&bg_ptr->lock);
- omap_bandgap_update_alert_threshold(bg_ptr, id, adc_val, hot);
- spin_unlock(&bg_ptr->lock);
+ spin_lock(&bgp->lock);
+ omap_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
+ spin_unlock(&bgp->lock);
exit:
return ret;
@@ -522,7 +522,7 @@ exit:
/**
* _omap_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
- * @bg_ptr: struct omap_bandgap pointer
+ * @bgp: struct omap_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a threshold
* @hot: desired threshold to be read. true if threshold hot, false if
@@ -532,33 +532,33 @@ exit:
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_read_threshold(struct omap_bandgap *bg_ptr, int id,
+int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id,
int *val, bool hot)
{
struct temp_sensor_registers *tsr;
u32 temp, mask;
int ret = 0;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
+ if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
- tsr = bg_ptr->conf->sensors[id].registers;
+ tsr = bgp->conf->sensors[id].registers;
if (hot)
mask = tsr->threshold_thot_mask;
else
mask = tsr->threshold_tcold_mask;
- temp = omap_bandgap_readl(bg_ptr, tsr->bgap_threshold);
+ temp = omap_bandgap_readl(bgp, tsr->bgap_threshold);
temp = (temp & mask) >> __ffs(mask);
- ret |= omap_bandgap_adc_to_mcelsius(bg_ptr, temp, &temp);
+ ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret) {
- dev_err(bg_ptr->dev, "failed to read thot\n");
+ dev_err(bgp->dev, "failed to read thot\n");
ret = -EIO;
goto exit;
}
@@ -573,84 +573,84 @@ exit:
/**
* omap_bandgap_read_thot() - reads sensor current thot
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @thot - resulting current thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_thot(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id,
int *thot)
{
- return _omap_bandgap_read_threshold(bg_ptr, id, thot, true);
+ return _omap_bandgap_read_threshold(bgp, id, thot, true);
}
/**
* omap_bandgap_write_thot() - sets sensor current thot
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_thot(struct omap_bandgap *bg_ptr, int id, int val)
+int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bg_ptr, id, val, true);
+ return _omap_bandgap_write_threshold(bgp, id, val, true);
}
/**
* omap_bandgap_read_tcold() - reads sensor current tcold
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @tcold - resulting current tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_tcold(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id,
int *tcold)
{
- return _omap_bandgap_read_threshold(bg_ptr, id, tcold, false);
+ return _omap_bandgap_read_threshold(bgp, id, tcold, false);
}
/**
* omap_bandgap_write_tcold() - sets the sensor tcold
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_tcold(struct omap_bandgap *bg_ptr, int id, int val)
+int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bg_ptr, id, val, false);
+ return _omap_bandgap_write_threshold(bgp, id, val, false);
}
/**
* omap_bandgap_read_update_interval() - read the sensor update interval
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - resulting update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_update_interval(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
int *interval)
{
struct temp_sensor_registers *tsr;
u32 time;
int ret;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
+ if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
- tsr = bg_ptr->conf->sensors[id].registers;
- time = omap_bandgap_readl(bg_ptr, tsr->bgap_counter);
+ tsr = bgp->conf->sensors[id].registers;
+ time = omap_bandgap_readl(bgp, tsr->bgap_counter);
time = (time & tsr->counter_mask) >> __ffs(tsr->counter_mask);
- time = time * 1000 / bg_ptr->clk_rate;
+ time = time * 1000 / bgp->clk_rate;
*interval = time;
@@ -659,53 +659,53 @@ int omap_bandgap_read_update_interval(struct omap_bandgap *bg_ptr, int id,
/**
* omap_bandgap_write_update_interval() - set the update interval
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - desired update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_update_interval(struct omap_bandgap *bg_ptr,
+int omap_bandgap_write_update_interval(struct omap_bandgap *bgp,
int id, u32 interval)
{
- int ret = omap_bandgap_validate(bg_ptr, id);
+ int ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
+ if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
- interval = interval * bg_ptr->clk_rate / 1000;
- spin_lock(&bg_ptr->lock);
- RMW_BITS(bg_ptr, id, bgap_counter, counter_mask, interval);
- spin_unlock(&bg_ptr->lock);
+ interval = interval * bgp->clk_rate / 1000;
+ spin_lock(&bgp->lock);
+ RMW_BITS(bgp, id, bgap_counter, counter_mask, interval);
+ spin_unlock(&bgp->lock);
return 0;
}
/**
* omap_bandgap_read_temperature() - report current temperature
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @temperature - resulting temperature
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_temperature(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
int *temperature)
{
u32 temp;
int ret;
- ret = omap_bandgap_validate(bg_ptr, id);
+ ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- spin_lock(&bg_ptr->lock);
- temp = omap_bandgap_read_temp(bg_ptr, id);
- spin_unlock(&bg_ptr->lock);
+ spin_lock(&bgp->lock);
+ temp = omap_bandgap_read_temp(bgp, id);
+ spin_unlock(&bgp->lock);
- ret |= omap_bandgap_adc_to_mcelsius(bg_ptr, temp, &temp);
+ ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
@@ -717,20 +717,20 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bg_ptr, int id,
/**
* omap_bandgap_set_sensor_data() - helper function to store thermal
* framework related data.
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
* @data - thermal framework related data to be stored
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
void *data)
{
- int ret = omap_bandgap_validate(bg_ptr, id);
+ int ret = omap_bandgap_validate(bgp, id);
if (ret)
return ret;
- bg_ptr->conf->sensors[id].data = data;
+ bgp->conf->sensors[id].data = data;
return 0;
}
@@ -738,71 +738,71 @@ int omap_bandgap_set_sensor_data(struct omap_bandgap *bg_ptr, int id,
/**
* omap_bandgap_get_sensor_data() - helper function to get thermal
* framework related data.
- * @bg_ptr - pointer to bandgap instance
+ * @bgp - pointer to bandgap instance
* @id - sensor id
*
* returns data stored by set function with sensor id on success or NULL
*/
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bg_ptr, int id)
+void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id)
{
- int ret = omap_bandgap_validate(bg_ptr, id);
+ int ret = omap_bandgap_validate(bgp, id);
if (ret)
return ERR_PTR(ret);
- return bg_ptr->conf->sensors[id].data;
+ return bgp->conf->sensors[id].data;
}
/*** Helper functions used during device initialization ***/
/**
* omap_bandgap_force_single_read() - executes 1 single ADC conversion
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @id: sensor id which it is desired to read 1 temperature
*
* Used to initialize the conversion state machine and set it to a valid
* state. Called during device initialization and context restore events.
*/
static int
-omap_bandgap_force_single_read(struct omap_bandgap *bg_ptr, int id)
+omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id)
{
u32 temp = 0, counter = 1000;
/* Select single conversion mode */
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- RMW_BITS(bg_ptr, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
/* Start of Conversion = 1 */
- RMW_BITS(bg_ptr, id, temp_sensor_ctrl, bgap_soc_mask, 1);
+ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
/* Wait until DTEMP is updated */
- temp = omap_bandgap_read_temp(bg_ptr, id);
+ temp = omap_bandgap_read_temp(bgp, id);
while ((temp == 0) && --counter)
- temp = omap_bandgap_read_temp(bg_ptr, id);
+ temp = omap_bandgap_read_temp(bgp, id);
/* REVISIT: Check correct condition for end of conversion */
/* Start of Conversion = 0 */
- RMW_BITS(bg_ptr, id, temp_sensor_ctrl, bgap_soc_mask, 0);
+ RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
return 0;
}
/**
* omap_bandgap_set_continous_mode() - One time enabling of continuous mode
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
* be used for junction temperature monitoring, it is desirable that the
* sensors are operational all the time, so that alerts are generated
* properly.
*/
-static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bg_ptr)
+static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
{
int i;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
/* Perform a single read just before enabling continuous */
- omap_bandgap_force_single_read(bg_ptr, i);
- RMW_BITS(bg_ptr, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
+ omap_bandgap_force_single_read(bgp, i);
+ RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
}
return 0;
@@ -810,7 +810,7 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bg_ptr)
/**
* omap_bandgap_tshut_init() - setup and initialize tshut handling
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TSHUT).
@@ -820,23 +820,21 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bg_ptr)
* one of the bandgap sensors violates the TSHUT high/hot threshold.
* And in that case, the system must go off.
*/
-static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
+static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
struct platform_device *pdev)
{
- int gpio_nr = bg_ptr->tshut_gpio;
+ int gpio_nr = bgp->tshut_gpio;
int status;
/* Request for gpio_86 line */
status = gpio_request(gpio_nr, "tshut");
if (status < 0) {
- dev_err(bg_ptr->dev,
- "Could not request for TSHUT GPIO:%i\n", 86);
+ dev_err(bgp->dev, "Could not request for TSHUT GPIO:%i\n", 86);
return status;
}
status = gpio_direction_input(gpio_nr);
if (status) {
- dev_err(bg_ptr->dev,
- "Cannot set input TSHUT GPIO %d\n", gpio_nr);
+ dev_err(bgp->dev, "Cannot set input TSHUT GPIO %d\n", gpio_nr);
return status;
}
@@ -846,7 +844,7 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
NULL);
if (status) {
gpio_free(gpio_nr);
- dev_err(bg_ptr->dev, "request irq failed for TSHUT");
+ dev_err(bgp->dev, "request irq failed for TSHUT");
}
return 0;
@@ -854,7 +852,7 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
/**
* omap_bandgap_alert_init() - setup and initialize talert handling
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TALERT).
@@ -863,20 +861,20 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bg_ptr,
* are violated. In these situation, the driver must reprogram the thresholds,
* accordingly to specified policy.
*/
-static int omap_bandgap_talert_init(struct omap_bandgap *bg_ptr,
+static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
struct platform_device *pdev)
{
int ret;
- bg_ptr->irq = platform_get_irq(pdev, 0);
- if (bg_ptr->irq < 0) {
+ bgp->irq = platform_get_irq(pdev, 0);
+ if (bgp->irq < 0) {
dev_err(&pdev->dev, "get_irq failed\n");
- return bg_ptr->irq;
+ return bgp->irq;
}
- ret = request_threaded_irq(bg_ptr->irq, NULL,
+ ret = request_threaded_irq(bgp->irq, NULL,
omap_bandgap_talert_irq_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- "talert", bg_ptr);
+ "talert", bgp);
if (ret) {
dev_err(&pdev->dev, "Request threaded irq failed.\n");
return ret;
@@ -887,7 +885,7 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bg_ptr,
/**
* omap_bandgap_build() - parse DT and setup a struct omap_bandgap
- * @bg_ptr: pointer to struct omap_bandgap
+ * @bgp: pointer to struct omap_bandgap
* @pdev: pointer to device struct platform_device
*
* Used to read the device tree properties accordingly to the bandgap
@@ -899,7 +897,7 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *of_id;
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
struct resource *res;
u32 prop;
int i;
@@ -910,16 +908,16 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
return ERR_PTR(-EINVAL);
}
- bg_ptr = devm_kzalloc(&pdev->dev, sizeof(struct omap_bandgap),
+ bgp = devm_kzalloc(&pdev->dev, sizeof(struct omap_bandgap),
GFP_KERNEL);
- if (!bg_ptr) {
+ if (!bgp) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
}
of_id = of_match_device(of_omap_bandgap_match, &pdev->dev);
if (of_id)
- bg_ptr->conf = of_id->data;
+ bgp->conf = of_id->data;
i = 0;
do {
@@ -930,27 +928,27 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
break;
chunk = devm_ioremap_resource(&pdev->dev, res);
if (i == 0)
- bg_ptr->base = chunk;
+ bgp->base = chunk;
if (IS_ERR(chunk))
return ERR_CAST(chunk);
i++;
} while (res);
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) {
dev_err(&pdev->dev, "missing tshut gpio in device tree\n");
return ERR_PTR(-EINVAL);
}
- bg_ptr->tshut_gpio = prop;
- if (!gpio_is_valid(bg_ptr->tshut_gpio)) {
+ bgp->tshut_gpio = prop;
+ if (!gpio_is_valid(bgp->tshut_gpio)) {
dev_err(&pdev->dev, "invalid gpio for tshut (%d)\n",
- bg_ptr->tshut_gpio);
+ bgp->tshut_gpio);
return ERR_PTR(-EINVAL);
}
}
- return bg_ptr;
+ return bgp;
}
/*** Device driver call backs ***/
@@ -958,18 +956,18 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
static
int omap_bandgap_probe(struct platform_device *pdev)
{
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
int clk_rate, ret = 0, i;
- bg_ptr = omap_bandgap_build(pdev);
- if (IS_ERR_OR_NULL(bg_ptr)) {
+ bgp = omap_bandgap_build(pdev);
+ if (IS_ERR_OR_NULL(bgp)) {
dev_err(&pdev->dev, "failed to fetch platform data\n");
- return PTR_ERR(bg_ptr);
+ return PTR_ERR(bgp);
}
- bg_ptr->dev = &pdev->dev;
+ bgp->dev = &pdev->dev;
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
- ret = omap_bandgap_tshut_init(bg_ptr, pdev);
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ ret = omap_bandgap_tshut_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize system tshut IRQ\n");
@@ -977,111 +975,111 @@ int omap_bandgap_probe(struct platform_device *pdev)
}
}
- bg_ptr->fclock = clk_get(NULL, bg_ptr->conf->fclock_name);
- ret = IS_ERR_OR_NULL(bg_ptr->fclock);
+ bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
+ ret = IS_ERR_OR_NULL(bgp->fclock);
if (ret) {
dev_err(&pdev->dev, "failed to request fclock reference\n");
goto free_irqs;
}
- bg_ptr->div_clk = clk_get(NULL, bg_ptr->conf->div_ck_name);
- ret = IS_ERR_OR_NULL(bg_ptr->div_clk);
+ bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
+ ret = IS_ERR_OR_NULL(bgp->div_clk);
if (ret) {
dev_err(&pdev->dev,
"failed to request div_ts_ck clock ref\n");
goto free_irqs;
}
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
u32 val;
- tsr = bg_ptr->conf->sensors[i].registers;
+ tsr = bgp->conf->sensors[i].registers;
/*
* check if the efuse has a non-zero value if not
* it is an untrimmed sample and the temperatures
* may not be accurate
*/
- val = omap_bandgap_readl(bg_ptr, tsr->bgap_efuse);
+ val = omap_bandgap_readl(bgp, tsr->bgap_efuse);
if (ret || !val)
dev_info(&pdev->dev,
"Non-trimmed BGAP, Temp not accurate\n");
}
- clk_rate = clk_round_rate(bg_ptr->div_clk,
- bg_ptr->conf->sensors[0].ts_data->max_freq);
- if (clk_rate < bg_ptr->conf->sensors[0].ts_data->min_freq ||
+ clk_rate = clk_round_rate(bgp->div_clk,
+ bgp->conf->sensors[0].ts_data->max_freq);
+ if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq ||
clk_rate == 0xffffffff) {
ret = -ENODEV;
dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
goto put_clks;
}
- ret = clk_set_rate(bg_ptr->div_clk, clk_rate);
+ ret = clk_set_rate(bgp->div_clk, clk_rate);
if (ret)
dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");
- bg_ptr->clk_rate = clk_rate;
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_prepare_enable(bg_ptr->fclock);
+ bgp->clk_rate = clk_rate;
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_prepare_enable(bgp->fclock);
- spin_lock_init(&bg_ptr->lock);
- bg_ptr->dev = &pdev->dev;
- platform_set_drvdata(pdev, bg_ptr);
+ spin_lock_init(&bgp->lock);
+ bgp->dev = &pdev->dev;
+ platform_set_drvdata(pdev, bgp);
- omap_bandgap_power(bg_ptr, true);
+ omap_bandgap_power(bgp, true);
/* Set default counter to 1 for now */
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- for (i = 0; i < bg_ptr->conf->sensor_count; i++)
- RMW_BITS(bg_ptr, i, bgap_counter, counter_mask, 1);
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ for (i = 0; i < bgp->conf->sensor_count; i++)
+ RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);
/* Set default thresholds for alert and shutdown */
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_data *ts_data;
- ts_data = bg_ptr->conf->sensors[i].ts_data;
+ ts_data = bgp->conf->sensors[i].ts_data;
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
/* Set initial Talert thresholds */
- RMW_BITS(bg_ptr, i, bgap_threshold,
+ RMW_BITS(bgp, i, bgap_threshold,
threshold_tcold_mask, ts_data->t_cold);
- RMW_BITS(bg_ptr, i, bgap_threshold,
+ RMW_BITS(bgp, i, bgap_threshold,
threshold_thot_mask, ts_data->t_hot);
/* Enable the alert events */
- RMW_BITS(bg_ptr, i, bgap_mask_ctrl, mask_hot_mask, 1);
- RMW_BITS(bg_ptr, i, bgap_mask_ctrl, mask_cold_mask, 1);
+ RMW_BITS(bgp, i, bgap_mask_ctrl, mask_hot_mask, 1);
+ RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
}
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG)) {
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
/* Set initial Tshut thresholds */
- RMW_BITS(bg_ptr, i, tshut_threshold,
+ RMW_BITS(bgp, i, tshut_threshold,
tshut_hot_mask, ts_data->tshut_hot);
- RMW_BITS(bg_ptr, i, tshut_threshold,
+ RMW_BITS(bgp, i, tshut_threshold,
tshut_cold_mask, ts_data->tshut_cold);
}
}
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- omap_bandgap_set_continuous_mode(bg_ptr);
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ omap_bandgap_set_continuous_mode(bgp);
/* Set .250 seconds time as default counter */
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- for (i = 0; i < bg_ptr->conf->sensor_count; i++)
- RMW_BITS(bg_ptr, i, bgap_counter, counter_mask,
- bg_ptr->clk_rate / 4);
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ for (i = 0; i < bgp->conf->sensor_count; i++)
+ RMW_BITS(bgp, i, bgap_counter, counter_mask,
+ bgp->clk_rate / 4);
/* Every thing is good? Then expose the sensors */
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
char *domain;
- if (bg_ptr->conf->sensors[i].register_cooling)
- bg_ptr->conf->sensors[i].register_cooling(bg_ptr, i);
+ if (bgp->conf->sensors[i].register_cooling)
+ bgp->conf->sensors[i].register_cooling(bgp, i);
- domain = bg_ptr->conf->sensors[i].domain;
- if (bg_ptr->conf->expose_sensor)
- bg_ptr->conf->expose_sensor(bg_ptr, i, domain);
+ domain = bgp->conf->sensors[i].domain;
+ if (bgp->conf->expose_sensor)
+ bgp->conf->expose_sensor(bgp, i, domain);
}
/*
@@ -1089,11 +1087,11 @@ int omap_bandgap_probe(struct platform_device *pdev)
* might be called as soon as it is enabled where as rest of framework
* is still getting initialised.
*/
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- ret = omap_bandgap_talert_init(bg_ptr, pdev);
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ ret = omap_bandgap_talert_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
- i = bg_ptr->conf->sensor_count;
+ i = bgp->conf->sensor_count;
goto disable_clk;
}
}
@@ -1101,15 +1099,15 @@ int omap_bandgap_probe(struct platform_device *pdev)
return 0;
disable_clk:
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_disable_unprepare(bg_ptr->fclock);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_disable_unprepare(bgp->fclock);
put_clks:
- clk_put(bg_ptr->fclock);
- clk_put(bg_ptr->div_clk);
+ clk_put(bgp->fclock);
+ clk_put(bgp->div_clk);
free_irqs:
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
- free_irq(gpio_to_irq(bg_ptr->tshut_gpio), NULL);
- gpio_free(bg_ptr->tshut_gpio);
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
+ gpio_free(bgp->tshut_gpio);
}
return ret;
@@ -1118,102 +1116,102 @@ free_irqs:
static
int omap_bandgap_remove(struct platform_device *pdev)
{
- struct omap_bandgap *bg_ptr = platform_get_drvdata(pdev);
+ struct omap_bandgap *bgp = platform_get_drvdata(pdev);
int i;
/* First thing is to remove sensor interfaces */
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
- if (bg_ptr->conf->sensors[i].register_cooling)
- bg_ptr->conf->sensors[i].unregister_cooling(bg_ptr, i);
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
+ if (bgp->conf->sensors[i].register_cooling)
+ bgp->conf->sensors[i].unregister_cooling(bgp, i);
- if (bg_ptr->conf->remove_sensor)
- bg_ptr->conf->remove_sensor(bg_ptr, i);
+ if (bgp->conf->remove_sensor)
+ bgp->conf->remove_sensor(bgp, i);
}
- omap_bandgap_power(bg_ptr, false);
+ omap_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_disable_unprepare(bg_ptr->fclock);
- clk_put(bg_ptr->fclock);
- clk_put(bg_ptr->div_clk);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_disable_unprepare(bgp->fclock);
+ clk_put(bgp->fclock);
+ clk_put(bgp->div_clk);
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT))
- free_irq(bg_ptr->irq, bg_ptr);
+ if (OMAP_BANDGAP_HAS(bgp, TALERT))
+ free_irq(bgp->irq, bgp);
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT)) {
- free_irq(gpio_to_irq(bg_ptr->tshut_gpio), NULL);
- gpio_free(bg_ptr->tshut_gpio);
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
+ gpio_free(bgp->tshut_gpio);
}
return 0;
}
#ifdef CONFIG_PM
-static int omap_bandgap_save_ctxt(struct omap_bandgap *bg_ptr)
+static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp)
{
int i;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
- rval = &bg_ptr->conf->sensors[i].regval;
- tsr = bg_ptr->conf->sensors[i].registers;
+ rval = &bgp->conf->sensors[i].regval;
+ tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- rval->bg_mode_ctrl = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ rval->bg_mode_ctrl = omap_bandgap_readl(bgp,
tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- rval->bg_counter = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ rval->bg_counter = omap_bandgap_readl(bgp,
tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- rval->bg_threshold = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ rval->bg_threshold = omap_bandgap_readl(bgp,
tsr->bgap_threshold);
- rval->bg_ctrl = omap_bandgap_readl(bg_ptr,
+ rval->bg_ctrl = omap_bandgap_readl(bgp,
tsr->bgap_mask_ctrl);
}
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG))
- rval->tshut_threshold = omap_bandgap_readl(bg_ptr,
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ rval->tshut_threshold = omap_bandgap_readl(bgp,
tsr->tshut_threshold);
}
return 0;
}
-static int omap_bandgap_restore_ctxt(struct omap_bandgap *bg_ptr)
+static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp)
{
int i;
- for (i = 0; i < bg_ptr->conf->sensor_count; i++) {
+ for (i = 0; i < bgp->conf->sensor_count; i++) {
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
u32 val = 0;
- rval = &bg_ptr->conf->sensors[i].regval;
- tsr = bg_ptr->conf->sensors[i].registers;
+ rval = &bgp->conf->sensors[i].regval;
+ tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- val = omap_bandgap_readl(bg_ptr, tsr->bgap_counter);
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ val = omap_bandgap_readl(bgp, tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bg_ptr, TSHUT_CONFIG))
- omap_bandgap_writel(bg_ptr, rval->tshut_threshold,
+ if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ omap_bandgap_writel(bgp, rval->tshut_threshold,
tsr->tshut_threshold);
/* Force immediate temperature measurement and update
* of the DTEMP field
*/
- omap_bandgap_force_single_read(bg_ptr, i);
+ omap_bandgap_force_single_read(bgp, i);
- if (OMAP_BANDGAP_HAS(bg_ptr, COUNTER))
- omap_bandgap_writel(bg_ptr, rval->bg_counter,
+ if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ omap_bandgap_writel(bgp, rval->bg_counter,
tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bg_ptr, MODE_CONFIG))
- omap_bandgap_writel(bg_ptr, rval->bg_mode_ctrl,
+ if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ omap_bandgap_writel(bgp, rval->bg_mode_ctrl,
tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bg_ptr, TALERT)) {
- omap_bandgap_writel(bg_ptr, rval->bg_threshold,
+ if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ omap_bandgap_writel(bgp, rval->bg_threshold,
tsr->bgap_threshold);
- omap_bandgap_writel(bg_ptr, rval->bg_ctrl,
+ omap_bandgap_writel(bgp, rval->bg_ctrl,
tsr->bgap_mask_ctrl);
}
}
@@ -1223,28 +1221,28 @@ static int omap_bandgap_restore_ctxt(struct omap_bandgap *bg_ptr)
static int omap_bandgap_suspend(struct device *dev)
{
- struct omap_bandgap *bg_ptr = dev_get_drvdata(dev);
+ struct omap_bandgap *bgp = dev_get_drvdata(dev);
int err;
- err = omap_bandgap_save_ctxt(bg_ptr);
- omap_bandgap_power(bg_ptr, false);
+ err = omap_bandgap_save_ctxt(bgp);
+ omap_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_disable_unprepare(bg_ptr->fclock);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_disable_unprepare(bgp->fclock);
return err;
}
static int omap_bandgap_resume(struct device *dev)
{
- struct omap_bandgap *bg_ptr = dev_get_drvdata(dev);
+ struct omap_bandgap *bgp = dev_get_drvdata(dev);
- if (OMAP_BANDGAP_HAS(bg_ptr, CLK_CTRL))
- clk_prepare_enable(bg_ptr->fclock);
+ if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ clk_prepare_enable(bgp->fclock);
- omap_bandgap_power(bg_ptr, true);
+ omap_bandgap_power(bgp, true);
- return omap_bandgap_restore_ctxt(bg_ptr);
+ return omap_bandgap_restore_ctxt(bgp);
}
static const struct dev_pm_ops omap_bandgap_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(omap_bandgap_suspend,
diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/omap-thermal/omap-bandgap.h
index 5700586..ad83be8 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.h
+++ b/drivers/staging/omap-thermal/omap-bandgap.h
@@ -269,8 +269,8 @@ struct omap_temp_sensor {
const int slope_pcb;
const int constant_pcb;
void *data;
- int (*register_cooling)(struct omap_bandgap *bg_ptr, int id);
- int (*unregister_cooling)(struct omap_bandgap *bg_ptr, int id);
+ int (*register_cooling)(struct omap_bandgap *bgp, int id);
+ int (*unregister_cooling)(struct omap_bandgap *bgp, int id);
};
/**
@@ -345,27 +345,27 @@ struct omap_bandgap_data {
char *fclock_name;
char *div_ck_name;
int sensor_count;
- int (*report_temperature)(struct omap_bandgap *bg_ptr, int id);
- int (*expose_sensor)(struct omap_bandgap *bg_ptr, int id, char *domain);
- int (*remove_sensor)(struct omap_bandgap *bg_ptr, int id);
+ int (*report_temperature)(struct omap_bandgap *bgp, int id);
+ int (*expose_sensor)(struct omap_bandgap *bgp, int id, char *domain);
+ int (*remove_sensor)(struct omap_bandgap *bgp, int id);
/* this needs to be at the end */
struct omap_temp_sensor sensors[];
};
-int omap_bandgap_read_thot(struct omap_bandgap *bg_ptr, int id, int *thot);
-int omap_bandgap_write_thot(struct omap_bandgap *bg_ptr, int id, int val);
-int omap_bandgap_read_tcold(struct omap_bandgap *bg_ptr, int id, int *tcold);
-int omap_bandgap_write_tcold(struct omap_bandgap *bg_ptr, int id, int val);
-int omap_bandgap_read_update_interval(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id, int *thot);
+int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val);
+int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id, int *tcold);
+int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val);
+int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
int *interval);
-int omap_bandgap_write_update_interval(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, int id,
u32 interval);
-int omap_bandgap_read_temperature(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
int *temperature);
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bg_ptr, int id,
+int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
void *data);
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bg_ptr, int id);
+void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id);
#ifdef CONFIG_OMAP4_THERMAL
extern const struct omap_bandgap_data omap4430_data;
diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/omap-thermal/omap-thermal-common.c
index 8aebc6a..9f7a77b 100644
--- a/drivers/staging/omap-thermal/omap-thermal-common.c
+++ b/drivers/staging/omap-thermal/omap-thermal-common.c
@@ -39,7 +39,7 @@
struct omap_thermal_data {
struct thermal_zone_device *omap_thermal;
struct thermal_cooling_device *cool_dev;
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
enum thermal_device_mode mode;
struct work_struct thermal_wq;
int sensor_id;
@@ -78,17 +78,17 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
{
struct omap_thermal_data *data = thermal->devdata;
- struct omap_bandgap *bg_ptr;
+ struct omap_bandgap *bgp;
struct omap_temp_sensor *s;
int ret, tmp, pcb_temp, slope, constant;
if (!data)
return 0;
- bg_ptr = data->bg_ptr;
- s = &bg_ptr->conf->sensors[data->sensor_id];
+ bgp = data->bgp;
+ s = &bgp->conf->sensors[data->sensor_id];
- ret = omap_bandgap_read_temperature(bg_ptr, data->sensor_id, &tmp);
+ ret = omap_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
if (ret)
return ret;
@@ -236,32 +236,32 @@ static struct thermal_zone_device_ops omap_thermal_ops = {
};
static struct omap_thermal_data
-*omap_thermal_build_data(struct omap_bandgap *bg_ptr, int id)
+*omap_thermal_build_data(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = devm_kzalloc(bg_ptr->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
- dev_err(bg_ptr->dev, "kzalloc fail\n");
+ dev_err(bgp->dev, "kzalloc fail\n");
return NULL;
}
data->sensor_id = id;
- data->bg_ptr = bg_ptr;
+ data->bgp = bgp;
data->mode = THERMAL_DEVICE_ENABLED;
INIT_WORK(&data->thermal_wq, omap_thermal_work);
return data;
}
-int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bg_ptr, id);
+ data = omap_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
@@ -273,44 +273,44 @@ int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
NULL, FAST_TEMP_MONITORING_RATE,
FAST_TEMP_MONITORING_RATE);
if (IS_ERR_OR_NULL(data->omap_thermal)) {
- dev_err(bg_ptr->dev, "thermal zone device is NULL\n");
+ dev_err(bgp->dev, "thermal zone device is NULL\n");
return PTR_ERR(data->omap_thermal);
}
data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
- omap_bandgap_set_sensor_data(bg_ptr, id, data);
+ omap_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
thermal_zone_device_unregister(data->omap_thermal);
return 0;
}
-int omap_thermal_report_sensor_temperature(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_report_sensor_temperature(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
schedule_work(&data->thermal_wq);
return 0;
}
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bg_ptr, id);
+ data = omap_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
@@ -318,20 +318,20 @@ int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
/* Register cooling device */
data->cool_dev = cpufreq_cooling_register(cpu_present_mask);
if (IS_ERR_OR_NULL(data->cool_dev)) {
- dev_err(bg_ptr->dev,
+ dev_err(bgp->dev,
"Failed to register cpufreq cooling device\n");
return PTR_ERR(data->cool_dev);
}
- omap_bandgap_set_sensor_data(bg_ptr, id, data);
+ omap_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
{
struct omap_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bg_ptr, id);
+ data = omap_bandgap_get_sensor_data(bgp, id);
cpufreq_cooling_unregister(data->cool_dev);
return 0;
diff --git a/drivers/staging/omap-thermal/omap-thermal.h b/drivers/staging/omap-thermal/omap-thermal.h
index 0dd2184..26cfc8d 100644
--- a/drivers/staging/omap-thermal/omap-thermal.h
+++ b/drivers/staging/omap-thermal/omap-thermal.h
@@ -74,33 +74,33 @@
((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
#ifdef CONFIG_OMAP_THERMAL
-int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain);
-int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id);
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id);
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id);
+int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id);
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id);
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id);
#else
static inline
-int omap_thermal_expose_sensor(struct omap_bandgap *bg_ptr, int id,
+int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain)
{
return 0;
}
static inline
-int omap_thermal_remove_sensor(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bg_ptr, int id)
+int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
{
return 0;
}
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 03/12] staging: rename omap-thermal driver to ti-soc-thermal
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Santosh Shilimkar, Benoit, Nishanth Menon, Dan Carpenter
Because this driver will support also OMAP derivatives,
this patch does a big rename inside this driver, so it
better fits its usage.
This patch only renames the directory, file names,
includes, Makefiles and Kconfig includes.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/Kconfig | 2 +-
drivers/staging/Makefile | 2 +-
drivers/staging/omap-thermal/Makefile | 5 -----
.../{omap-thermal => ti-soc-thermal}/Kconfig | 6 ++++--
drivers/staging/ti-soc-thermal/Makefile | 5 +++++
.../staging/{omap-thermal => ti-soc-thermal}/TODO | 4 ++--
.../omap4-thermal-data.c | 4 ++--
.../omap4xxx-bandgap.h | 0
.../omap5-thermal-data.c | 4 ++--
.../omap5xxx-bandgap.h | 0
.../omap-bandgap.c => ti-soc-thermal/ti-bandgap.c} | 2 +-
.../omap-bandgap.h => ti-soc-thermal/ti-bandgap.h} | 0
.../ti-thermal-common.c} | 4 ++--
.../omap-thermal.h => ti-soc-thermal/ti-thermal.h} | 2 +-
.../ti_soc_thermal.txt} | 0
15 files changed, 21 insertions(+), 19 deletions(-)
delete mode 100644 drivers/staging/omap-thermal/Makefile
rename drivers/staging/{omap-thermal => ti-soc-thermal}/Kconfig (88%)
create mode 100644 drivers/staging/ti-soc-thermal/Makefile
rename drivers/staging/{omap-thermal => ti-soc-thermal}/TODO (90%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap4-thermal-data.c (99%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap4xxx-bandgap.h (100%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap5-thermal-data.c (99%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap5xxx-bandgap.h (100%)
rename drivers/staging/{omap-thermal/omap-bandgap.c => ti-soc-thermal/ti-bandgap.c} (99%)
rename drivers/staging/{omap-thermal/omap-bandgap.h => ti-soc-thermal/ti-bandgap.h} (100%)
rename drivers/staging/{omap-thermal/omap-thermal-common.c => ti-soc-thermal/ti-thermal-common.c} (99%)
rename drivers/staging/{omap-thermal/omap-thermal.h => ti-soc-thermal/ti-thermal.h} (99%)
rename drivers/staging/{omap-thermal/omap_bandgap.txt => ti-soc-thermal/ti_soc_thermal.txt} (100%)
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d4775a5..5e62d00 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -120,7 +120,7 @@ source "drivers/staging/gdm72xx/Kconfig"
source "drivers/staging/csr/Kconfig"
-source "drivers/staging/omap-thermal/Kconfig"
+source "drivers/staging/ti-soc-thermal/Kconfig"
source "drivers/staging/silicom/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index e1ed6ad..284624c 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/
obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/
obj-$(CONFIG_CSR_WIFI) += csr/
-obj-$(CONFIG_OMAP_BANDGAP) += omap-thermal/
+obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal/
obj-$(CONFIG_NET_VENDOR_SILICOM) += silicom/
obj-$(CONFIG_CED1401) += ced1401/
obj-$(CONFIG_DRM_IMX) += imx-drm/
diff --git a/drivers/staging/omap-thermal/Makefile b/drivers/staging/omap-thermal/Makefile
deleted file mode 100644
index fbd14d1..0000000
--- a/drivers/staging/omap-thermal/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-$(CONFIG_OMAP_BANDGAP) += omap-thermal.o
-omap-thermal-y := omap-bandgap.o
-omap-thermal-$(CONFIG_OMAP_THERMAL) += omap-thermal-common.o
-omap-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
-omap-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/drivers/staging/omap-thermal/Kconfig b/drivers/staging/ti-soc-thermal/Kconfig
similarity index 88%
rename from drivers/staging/omap-thermal/Kconfig
rename to drivers/staging/ti-soc-thermal/Kconfig
index 52170bf..6b3f3db 100644
--- a/drivers/staging/omap-thermal/Kconfig
+++ b/drivers/staging/ti-soc-thermal/Kconfig
@@ -16,8 +16,10 @@ config OMAP_THERMAL
depends on CPU_THERMAL
help
If you say yes here you want to get support for generic thermal
- framework for the Texas Instruments OMAP4460+ on die bandgap
- temperature sensor.
+ framework for the Texas Instruments on die bandgap temperature sensor.
+
+ This includes trip points definitions, extrapolation rules and
+ CPU cooling device bindings.
config OMAP4_THERMAL
bool "Texas Instruments OMAP4 thermal support"
diff --git a/drivers/staging/ti-soc-thermal/Makefile b/drivers/staging/ti-soc-thermal/Makefile
new file mode 100644
index 0000000..3539474
--- /dev/null
+++ b/drivers/staging/ti-soc-thermal/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal.o
+ti-soc-thermal-y := ti-bandgap.o
+ti-soc-thermal-$(CONFIG_OMAP_THERMAL) += ti-thermal-common.o
+ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
+ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/drivers/staging/omap-thermal/TODO b/drivers/staging/ti-soc-thermal/TODO
similarity index 90%
rename from drivers/staging/omap-thermal/TODO
rename to drivers/staging/ti-soc-thermal/TODO
index d45f556..9b4c841 100644
--- a/drivers/staging/omap-thermal/TODO
+++ b/drivers/staging/ti-soc-thermal/TODO
@@ -1,13 +1,13 @@
List of TODOs (by Eduardo Valentin)
-on omap-bandgap.c:
+on ti-bandgap.c:
- Test every exposed API to userland
- Add support to hwmon
- Revisit PM support
- Revisit data structures and simplify them
- Once SCM-core api settles, update this driver accordingly
-on omap-thermal-common.c/omap-thermal.h:
+on ti-thermal-common.c/ti-thermal.h:
- Revisit extrapolation constants for O4/O5
- Revisit need for locking
- Revisit trips and its definitions
diff --git a/drivers/staging/omap-thermal/omap4-thermal-data.c b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap4-thermal-data.c
rename to drivers/staging/ti-soc-thermal/omap4-thermal-data.c
index 88ed014..97544f7 100644
--- a/drivers/staging/omap-thermal/omap4-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
@@ -16,8 +16,8 @@
*
*/
-#include "omap-thermal.h"
-#include "omap-bandgap.h"
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
#include "omap4xxx-bandgap.h"
/*
diff --git a/drivers/staging/omap-thermal/omap4xxx-bandgap.h b/drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h
similarity index 100%
rename from drivers/staging/omap-thermal/omap4xxx-bandgap.h
rename to drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h
diff --git a/drivers/staging/omap-thermal/omap5-thermal-data.c b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap5-thermal-data.c
rename to drivers/staging/ti-soc-thermal/omap5-thermal-data.c
index a48c286..172b4ad 100644
--- a/drivers/staging/omap-thermal/omap5-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
@@ -16,9 +16,9 @@
*
*/
-#include "omap-bandgap.h"
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
#include "omap5xxx-bandgap.h"
-#include "omap-thermal.h"
/*
* OMAP5430 has three instances of thermal sensor for MPU, GPU & CORE,
diff --git a/drivers/staging/omap-thermal/omap5xxx-bandgap.h b/drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h
similarity index 100%
rename from drivers/staging/omap-thermal/omap5xxx-bandgap.h
rename to drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap-bandgap.c
rename to drivers/staging/ti-soc-thermal/ti-bandgap.c
index 1189ca7..5a8ae9c 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -40,7 +40,7 @@
#include <linux/of_irq.h>
#include <linux/io.h>
-#include "omap-bandgap.h"
+#include "ti-bandgap.h"
/*** Helper functions to access registers and their bitfields ***/
diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
similarity index 100%
rename from drivers/staging/omap-thermal/omap-bandgap.h
rename to drivers/staging/ti-soc-thermal/ti-bandgap.h
diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap-thermal-common.c
rename to drivers/staging/ti-soc-thermal/ti-thermal-common.c
index 9f7a77b..feab2f4 100644
--- a/drivers/staging/omap-thermal/omap-thermal-common.c
+++ b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
@@ -32,8 +32,8 @@
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
-#include "omap-thermal.h"
-#include "omap-bandgap.h"
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
/* common data structures */
struct omap_thermal_data {
diff --git a/drivers/staging/omap-thermal/omap-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h
similarity index 99%
rename from drivers/staging/omap-thermal/omap-thermal.h
rename to drivers/staging/ti-soc-thermal/ti-thermal.h
index 26cfc8d..6fed8ac 100644
--- a/drivers/staging/omap-thermal/omap-thermal.h
+++ b/drivers/staging/ti-soc-thermal/ti-thermal.h
@@ -23,7 +23,7 @@
#ifndef __OMAP_THERMAL_H
#define __OMAP_THERMAL_H
-#include "omap-bandgap.h"
+#include "ti-bandgap.h"
/* sensors gradient and offsets */
#define OMAP_GRADIENT_SLOPE_4460 348
diff --git a/drivers/staging/omap-thermal/omap_bandgap.txt b/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt
similarity index 100%
rename from drivers/staging/omap-thermal/omap_bandgap.txt
rename to drivers/staging/ti-soc-thermal/ti_soc_thermal.txt
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 03/12] staging: rename omap-thermal driver to ti-soc-thermal
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Santosh Shilimkar, Benoit, Nishanth Menon, Dan Carpenter
Because this driver will support also OMAP derivatives,
this patch does a big rename inside this driver, so it
better fits its usage.
This patch only renames the directory, file names,
includes, Makefiles and Kconfig includes.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/Kconfig | 2 +-
drivers/staging/Makefile | 2 +-
drivers/staging/omap-thermal/Makefile | 5 -----
.../{omap-thermal => ti-soc-thermal}/Kconfig | 6 ++++--
drivers/staging/ti-soc-thermal/Makefile | 5 +++++
.../staging/{omap-thermal => ti-soc-thermal}/TODO | 4 ++--
.../omap4-thermal-data.c | 4 ++--
.../omap4xxx-bandgap.h | 0
.../omap5-thermal-data.c | 4 ++--
.../omap5xxx-bandgap.h | 0
.../omap-bandgap.c => ti-soc-thermal/ti-bandgap.c} | 2 +-
.../omap-bandgap.h => ti-soc-thermal/ti-bandgap.h} | 0
.../ti-thermal-common.c} | 4 ++--
.../omap-thermal.h => ti-soc-thermal/ti-thermal.h} | 2 +-
.../ti_soc_thermal.txt} | 0
15 files changed, 21 insertions(+), 19 deletions(-)
delete mode 100644 drivers/staging/omap-thermal/Makefile
rename drivers/staging/{omap-thermal => ti-soc-thermal}/Kconfig (88%)
create mode 100644 drivers/staging/ti-soc-thermal/Makefile
rename drivers/staging/{omap-thermal => ti-soc-thermal}/TODO (90%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap4-thermal-data.c (99%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap4xxx-bandgap.h (100%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap5-thermal-data.c (99%)
rename drivers/staging/{omap-thermal => ti-soc-thermal}/omap5xxx-bandgap.h (100%)
rename drivers/staging/{omap-thermal/omap-bandgap.c => ti-soc-thermal/ti-bandgap.c} (99%)
rename drivers/staging/{omap-thermal/omap-bandgap.h => ti-soc-thermal/ti-bandgap.h} (100%)
rename drivers/staging/{omap-thermal/omap-thermal-common.c => ti-soc-thermal/ti-thermal-common.c} (99%)
rename drivers/staging/{omap-thermal/omap-thermal.h => ti-soc-thermal/ti-thermal.h} (99%)
rename drivers/staging/{omap-thermal/omap_bandgap.txt => ti-soc-thermal/ti_soc_thermal.txt} (100%)
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d4775a5..5e62d00 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -120,7 +120,7 @@ source "drivers/staging/gdm72xx/Kconfig"
source "drivers/staging/csr/Kconfig"
-source "drivers/staging/omap-thermal/Kconfig"
+source "drivers/staging/ti-soc-thermal/Kconfig"
source "drivers/staging/silicom/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index e1ed6ad..284624c 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/
obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/
obj-$(CONFIG_CSR_WIFI) += csr/
-obj-$(CONFIG_OMAP_BANDGAP) += omap-thermal/
+obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal/
obj-$(CONFIG_NET_VENDOR_SILICOM) += silicom/
obj-$(CONFIG_CED1401) += ced1401/
obj-$(CONFIG_DRM_IMX) += imx-drm/
diff --git a/drivers/staging/omap-thermal/Makefile b/drivers/staging/omap-thermal/Makefile
deleted file mode 100644
index fbd14d1..0000000
--- a/drivers/staging/omap-thermal/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-$(CONFIG_OMAP_BANDGAP) += omap-thermal.o
-omap-thermal-y := omap-bandgap.o
-omap-thermal-$(CONFIG_OMAP_THERMAL) += omap-thermal-common.o
-omap-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
-omap-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/drivers/staging/omap-thermal/Kconfig b/drivers/staging/ti-soc-thermal/Kconfig
similarity index 88%
rename from drivers/staging/omap-thermal/Kconfig
rename to drivers/staging/ti-soc-thermal/Kconfig
index 52170bf..6b3f3db 100644
--- a/drivers/staging/omap-thermal/Kconfig
+++ b/drivers/staging/ti-soc-thermal/Kconfig
@@ -16,8 +16,10 @@ config OMAP_THERMAL
depends on CPU_THERMAL
help
If you say yes here you want to get support for generic thermal
- framework for the Texas Instruments OMAP4460+ on die bandgap
- temperature sensor.
+ framework for the Texas Instruments on die bandgap temperature sensor.
+
+ This includes trip points definitions, extrapolation rules and
+ CPU cooling device bindings.
config OMAP4_THERMAL
bool "Texas Instruments OMAP4 thermal support"
diff --git a/drivers/staging/ti-soc-thermal/Makefile b/drivers/staging/ti-soc-thermal/Makefile
new file mode 100644
index 0000000..3539474
--- /dev/null
+++ b/drivers/staging/ti-soc-thermal/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal.o
+ti-soc-thermal-y := ti-bandgap.o
+ti-soc-thermal-$(CONFIG_OMAP_THERMAL) += ti-thermal-common.o
+ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
+ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/drivers/staging/omap-thermal/TODO b/drivers/staging/ti-soc-thermal/TODO
similarity index 90%
rename from drivers/staging/omap-thermal/TODO
rename to drivers/staging/ti-soc-thermal/TODO
index d45f556..9b4c841 100644
--- a/drivers/staging/omap-thermal/TODO
+++ b/drivers/staging/ti-soc-thermal/TODO
@@ -1,13 +1,13 @@
List of TODOs (by Eduardo Valentin)
-on omap-bandgap.c:
+on ti-bandgap.c:
- Test every exposed API to userland
- Add support to hwmon
- Revisit PM support
- Revisit data structures and simplify them
- Once SCM-core api settles, update this driver accordingly
-on omap-thermal-common.c/omap-thermal.h:
+on ti-thermal-common.c/ti-thermal.h:
- Revisit extrapolation constants for O4/O5
- Revisit need for locking
- Revisit trips and its definitions
diff --git a/drivers/staging/omap-thermal/omap4-thermal-data.c b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap4-thermal-data.c
rename to drivers/staging/ti-soc-thermal/omap4-thermal-data.c
index 88ed014..97544f7 100644
--- a/drivers/staging/omap-thermal/omap4-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
@@ -16,8 +16,8 @@
*
*/
-#include "omap-thermal.h"
-#include "omap-bandgap.h"
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
#include "omap4xxx-bandgap.h"
/*
diff --git a/drivers/staging/omap-thermal/omap4xxx-bandgap.h b/drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h
similarity index 100%
rename from drivers/staging/omap-thermal/omap4xxx-bandgap.h
rename to drivers/staging/ti-soc-thermal/omap4xxx-bandgap.h
diff --git a/drivers/staging/omap-thermal/omap5-thermal-data.c b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap5-thermal-data.c
rename to drivers/staging/ti-soc-thermal/omap5-thermal-data.c
index a48c286..172b4ad 100644
--- a/drivers/staging/omap-thermal/omap5-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
@@ -16,9 +16,9 @@
*
*/
-#include "omap-bandgap.h"
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
#include "omap5xxx-bandgap.h"
-#include "omap-thermal.h"
/*
* OMAP5430 has three instances of thermal sensor for MPU, GPU & CORE,
diff --git a/drivers/staging/omap-thermal/omap5xxx-bandgap.h b/drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h
similarity index 100%
rename from drivers/staging/omap-thermal/omap5xxx-bandgap.h
rename to drivers/staging/ti-soc-thermal/omap5xxx-bandgap.h
diff --git a/drivers/staging/omap-thermal/omap-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap-bandgap.c
rename to drivers/staging/ti-soc-thermal/ti-bandgap.c
index 1189ca7..5a8ae9c 100644
--- a/drivers/staging/omap-thermal/omap-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -40,7 +40,7 @@
#include <linux/of_irq.h>
#include <linux/io.h>
-#include "omap-bandgap.h"
+#include "ti-bandgap.h"
/*** Helper functions to access registers and their bitfields ***/
diff --git a/drivers/staging/omap-thermal/omap-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
similarity index 100%
rename from drivers/staging/omap-thermal/omap-bandgap.h
rename to drivers/staging/ti-soc-thermal/ti-bandgap.h
diff --git a/drivers/staging/omap-thermal/omap-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
similarity index 99%
rename from drivers/staging/omap-thermal/omap-thermal-common.c
rename to drivers/staging/ti-soc-thermal/ti-thermal-common.c
index 9f7a77b..feab2f4 100644
--- a/drivers/staging/omap-thermal/omap-thermal-common.c
+++ b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
@@ -32,8 +32,8 @@
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
-#include "omap-thermal.h"
-#include "omap-bandgap.h"
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
/* common data structures */
struct omap_thermal_data {
diff --git a/drivers/staging/omap-thermal/omap-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h
similarity index 99%
rename from drivers/staging/omap-thermal/omap-thermal.h
rename to drivers/staging/ti-soc-thermal/ti-thermal.h
index 26cfc8d..6fed8ac 100644
--- a/drivers/staging/omap-thermal/omap-thermal.h
+++ b/drivers/staging/ti-soc-thermal/ti-thermal.h
@@ -23,7 +23,7 @@
#ifndef __OMAP_THERMAL_H
#define __OMAP_THERMAL_H
-#include "omap-bandgap.h"
+#include "ti-bandgap.h"
/* sensors gradient and offsets */
#define OMAP_GRADIENT_SLOPE_4460 348
diff --git a/drivers/staging/omap-thermal/omap_bandgap.txt b/drivers/staging/ti-soc-thermal/ti_soc_thermal.txt
similarity index 100%
rename from drivers/staging/omap-thermal/omap_bandgap.txt
rename to drivers/staging/ti-soc-thermal/ti_soc_thermal.txt
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 04/12] staging: ti-soc-thermal: rename Kconfig options
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Santosh Shilimkar, Benoit, Nishanth Menon, Dan Carpenter
This patch renames the Kconfig options to cope with
the new naming convention.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/Makefile | 2 +-
drivers/staging/ti-soc-thermal/Kconfig | 14 +++++++-------
drivers/staging/ti-soc-thermal/Makefile | 4 ++--
drivers/staging/ti-soc-thermal/ti-thermal.h | 6 +++---
4 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 284624c..b6d15ec 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/
obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/
obj-$(CONFIG_CSR_WIFI) += csr/
-obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal/
+obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_NET_VENDOR_SILICOM) += silicom/
obj-$(CONFIG_CED1401) += ced1401/
obj-$(CONFIG_DRM_IMX) += imx-drm/
diff --git a/drivers/staging/ti-soc-thermal/Kconfig b/drivers/staging/ti-soc-thermal/Kconfig
index 6b3f3db..e81375f 100644
--- a/drivers/staging/ti-soc-thermal/Kconfig
+++ b/drivers/staging/ti-soc-thermal/Kconfig
@@ -1,5 +1,5 @@
-config OMAP_BANDGAP
- tristate "Texas Instruments OMAP4+ temperature sensor driver"
+config TI_SOC_THERMAL
+ tristate "Texas Instruments SoCs temperature sensor driver"
depends on THERMAL
depends on ARCH_HAS_BANDGAP
help
@@ -10,9 +10,9 @@ config OMAP_BANDGAP
This includes alert interrupts generation and also the TSHUT
support.
-config OMAP_THERMAL
- bool "Texas Instruments OMAP4+ thermal framework support"
- depends on OMAP_BANDGAP
+config TI_THERMAL
+ bool "Texas Instruments SoCs thermal framework support"
+ depends on TI_SOC_THERMAL
depends on CPU_THERMAL
help
If you say yes here you want to get support for generic thermal
@@ -23,7 +23,7 @@ config OMAP_THERMAL
config OMAP4_THERMAL
bool "Texas Instruments OMAP4 thermal support"
- depends on OMAP_BANDGAP
+ depends on TI_SOC_THERMAL
depends on ARCH_OMAP4
help
If you say yes here you get thermal support for the Texas Instruments
@@ -37,7 +37,7 @@ config OMAP4_THERMAL
config OMAP5_THERMAL
bool "Texas Instruments OMAP5 thermal support"
- depends on OMAP_BANDGAP
+ depends on TI_SOC_THERMAL
depends on SOC_OMAP5
help
If you say yes here you get thermal support for the Texas Instruments
diff --git a/drivers/staging/ti-soc-thermal/Makefile b/drivers/staging/ti-soc-thermal/Makefile
index 3539474..0ca034f 100644
--- a/drivers/staging/ti-soc-thermal/Makefile
+++ b/drivers/staging/ti-soc-thermal/Makefile
@@ -1,5 +1,5 @@
-obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal.o
+obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o
ti-soc-thermal-y := ti-bandgap.o
-ti-soc-thermal-$(CONFIG_OMAP_THERMAL) += ti-thermal-common.o
+ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o
ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h
index 6fed8ac..3ed4adb 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal.h
+++ b/drivers/staging/ti-soc-thermal/ti-thermal.h
@@ -20,8 +20,8 @@
* 02110-1301 USA
*
*/
-#ifndef __OMAP_THERMAL_H
-#define __OMAP_THERMAL_H
+#ifndef __TI_THERMAL_H
+#define __TI_THERMAL_H
#include "ti-bandgap.h"
@@ -73,7 +73,7 @@
#define omap_thermal_is_valid_trip(trip) \
((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
-#ifdef CONFIG_OMAP_THERMAL
+#ifdef CONFIG_TI_THERMAL
int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain);
int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id);
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 04/12] staging: ti-soc-thermal: rename Kconfig options
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Santosh Shilimkar, Benoit, Nishanth Menon, Dan Carpenter
This patch renames the Kconfig options to cope with
the new naming convention.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/Makefile | 2 +-
drivers/staging/ti-soc-thermal/Kconfig | 14 +++++++-------
drivers/staging/ti-soc-thermal/Makefile | 4 ++--
drivers/staging/ti-soc-thermal/ti-thermal.h | 6 +++---
4 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 284624c..b6d15ec 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_ANDROID) += android/
obj-$(CONFIG_USB_WPAN_HCD) += ozwpan/
obj-$(CONFIG_WIMAX_GDM72XX) += gdm72xx/
obj-$(CONFIG_CSR_WIFI) += csr/
-obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal/
+obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_NET_VENDOR_SILICOM) += silicom/
obj-$(CONFIG_CED1401) += ced1401/
obj-$(CONFIG_DRM_IMX) += imx-drm/
diff --git a/drivers/staging/ti-soc-thermal/Kconfig b/drivers/staging/ti-soc-thermal/Kconfig
index 6b3f3db..e81375f 100644
--- a/drivers/staging/ti-soc-thermal/Kconfig
+++ b/drivers/staging/ti-soc-thermal/Kconfig
@@ -1,5 +1,5 @@
-config OMAP_BANDGAP
- tristate "Texas Instruments OMAP4+ temperature sensor driver"
+config TI_SOC_THERMAL
+ tristate "Texas Instruments SoCs temperature sensor driver"
depends on THERMAL
depends on ARCH_HAS_BANDGAP
help
@@ -10,9 +10,9 @@ config OMAP_BANDGAP
This includes alert interrupts generation and also the TSHUT
support.
-config OMAP_THERMAL
- bool "Texas Instruments OMAP4+ thermal framework support"
- depends on OMAP_BANDGAP
+config TI_THERMAL
+ bool "Texas Instruments SoCs thermal framework support"
+ depends on TI_SOC_THERMAL
depends on CPU_THERMAL
help
If you say yes here you want to get support for generic thermal
@@ -23,7 +23,7 @@ config OMAP_THERMAL
config OMAP4_THERMAL
bool "Texas Instruments OMAP4 thermal support"
- depends on OMAP_BANDGAP
+ depends on TI_SOC_THERMAL
depends on ARCH_OMAP4
help
If you say yes here you get thermal support for the Texas Instruments
@@ -37,7 +37,7 @@ config OMAP4_THERMAL
config OMAP5_THERMAL
bool "Texas Instruments OMAP5 thermal support"
- depends on OMAP_BANDGAP
+ depends on TI_SOC_THERMAL
depends on SOC_OMAP5
help
If you say yes here you get thermal support for the Texas Instruments
diff --git a/drivers/staging/ti-soc-thermal/Makefile b/drivers/staging/ti-soc-thermal/Makefile
index 3539474..0ca034f 100644
--- a/drivers/staging/ti-soc-thermal/Makefile
+++ b/drivers/staging/ti-soc-thermal/Makefile
@@ -1,5 +1,5 @@
-obj-$(CONFIG_OMAP_BANDGAP) += ti-soc-thermal.o
+obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o
ti-soc-thermal-y := ti-bandgap.o
-ti-soc-thermal-$(CONFIG_OMAP_THERMAL) += ti-thermal-common.o
+ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o
ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h
index 6fed8ac..3ed4adb 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal.h
+++ b/drivers/staging/ti-soc-thermal/ti-thermal.h
@@ -20,8 +20,8 @@
* 02110-1301 USA
*
*/
-#ifndef __OMAP_THERMAL_H
-#define __OMAP_THERMAL_H
+#ifndef __TI_THERMAL_H
+#define __TI_THERMAL_H
#include "ti-bandgap.h"
@@ -73,7 +73,7 @@
#define omap_thermal_is_valid_trip(trip) \
((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
-#ifdef CONFIG_OMAP_THERMAL
+#ifdef CONFIG_TI_THERMAL
int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
char *domain);
int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id);
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 05/12] staging: ti-soc-thermal: rename symbols to use better prefix
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Santosh Shilimkar, Benoit, Nishanth Menon, Dan Carpenter
As this driver has been renamed to cope with the chips it
is supposed to support, this patch also changes the symbol
names to use a proper prefix, so it is not suggestive that
this driver supports only OMAP devices.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
.../staging/ti-soc-thermal/omap4-thermal-data.c | 64 ++--
.../staging/ti-soc-thermal/omap5-thermal-data.c | 16 +-
drivers/staging/ti-soc-thermal/ti-bandgap.c | 452 ++++++++++----------
drivers/staging/ti-soc-thermal/ti-bandgap.h | 123 +++---
drivers/staging/ti-soc-thermal/ti-thermal-common.c | 172 ++++----
drivers/staging/ti-soc-thermal/ti-thermal.h | 26 +-
6 files changed, 421 insertions(+), 432 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
index 97544f7..49d0324 100644
--- a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
@@ -66,17 +66,17 @@ omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = {
};
/* OMAP4430 data */
-const struct omap_bandgap_data omap4430_data = {
- .features = OMAP_BANDGAP_FEATURE_MODE_CONFIG |
- OMAP_BANDGAP_FEATURE_CLK_CTRL |
- OMAP_BANDGAP_FEATURE_POWER_SWITCH,
+const struct ti_bandgap_data omap4430_data = {
+ .features = TI_BANDGAP_FEATURE_MODE_CONFIG |
+ TI_BANDGAP_FEATURE_CLK_CTRL |
+ TI_BANDGAP_FEATURE_POWER_SWITCH,
.fclock_name = "bandgap_fclk",
.div_ck_name = "bandgap_fclk",
.conv_table = omap4430_adc_to_temp,
.adc_start_val = OMAP4430_ADC_START_VALUE,
.adc_end_val = OMAP4430_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap4430_mpu_temp_sensor_registers,
@@ -86,8 +86,8 @@ const struct omap_bandgap_data omap4430_data = {
.constant = 20000,
.slope_pcb = 0,
.constant_pcb = 20000,
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
},
},
.sensor_count = 1,
@@ -201,21 +201,21 @@ omap4460_adc_to_temp[OMAP4460_ADC_END_VALUE - OMAP4460_ADC_START_VALUE + 1] = {
};
/* OMAP4460 data */
-const struct omap_bandgap_data omap4460_data = {
- .features = OMAP_BANDGAP_FEATURE_TSHUT |
- OMAP_BANDGAP_FEATURE_TSHUT_CONFIG |
- OMAP_BANDGAP_FEATURE_TALERT |
- OMAP_BANDGAP_FEATURE_MODE_CONFIG |
- OMAP_BANDGAP_FEATURE_POWER_SWITCH |
- OMAP_BANDGAP_FEATURE_CLK_CTRL |
- OMAP_BANDGAP_FEATURE_COUNTER,
+const struct ti_bandgap_data omap4460_data = {
+ .features = TI_BANDGAP_FEATURE_TSHUT |
+ TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+ TI_BANDGAP_FEATURE_TALERT |
+ TI_BANDGAP_FEATURE_MODE_CONFIG |
+ TI_BANDGAP_FEATURE_POWER_SWITCH |
+ TI_BANDGAP_FEATURE_CLK_CTRL |
+ TI_BANDGAP_FEATURE_COUNTER,
.fclock_name = "bandgap_ts_fclk",
.div_ck_name = "div_ts_ck",
.conv_table = omap4460_adc_to_temp,
.adc_start_val = OMAP4460_ADC_START_VALUE,
.adc_end_val = OMAP4460_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap4460_mpu_temp_sensor_registers,
@@ -225,29 +225,29 @@ const struct omap_bandgap_data omap4460_data = {
.constant = OMAP_GRADIENT_CONST_4460,
.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4460,
.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4460,
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
},
},
.sensor_count = 1,
};
/* OMAP4470 data */
-const struct omap_bandgap_data omap4470_data = {
- .features = OMAP_BANDGAP_FEATURE_TSHUT |
- OMAP_BANDGAP_FEATURE_TSHUT_CONFIG |
- OMAP_BANDGAP_FEATURE_TALERT |
- OMAP_BANDGAP_FEATURE_MODE_CONFIG |
- OMAP_BANDGAP_FEATURE_POWER_SWITCH |
- OMAP_BANDGAP_FEATURE_CLK_CTRL |
- OMAP_BANDGAP_FEATURE_COUNTER,
+const struct ti_bandgap_data omap4470_data = {
+ .features = TI_BANDGAP_FEATURE_TSHUT |
+ TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+ TI_BANDGAP_FEATURE_TALERT |
+ TI_BANDGAP_FEATURE_MODE_CONFIG |
+ TI_BANDGAP_FEATURE_POWER_SWITCH |
+ TI_BANDGAP_FEATURE_CLK_CTRL |
+ TI_BANDGAP_FEATURE_COUNTER,
.fclock_name = "bandgap_ts_fclk",
.div_ck_name = "div_ts_ck",
.conv_table = omap4460_adc_to_temp,
.adc_start_val = OMAP4460_ADC_START_VALUE,
.adc_end_val = OMAP4460_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap4460_mpu_temp_sensor_registers,
@@ -257,8 +257,8 @@ const struct omap_bandgap_data omap4470_data = {
.constant = OMAP_GRADIENT_CONST_4470,
.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4470,
.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4470,
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
},
},
.sensor_count = 1,
diff --git a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
index 172b4ad..0afe9c8 100644
--- a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
@@ -312,24 +312,24 @@ omap5430_adc_to_temp[
/* OMAP54xx ES2.0 data */
/* TODO : Need to update the slope/constant for ES2.0 silicon */
-const struct omap_bandgap_data omap5430_data = {
- .features = OMAP_BANDGAP_FEATURE_TSHUT_CONFIG |
- OMAP_BANDGAP_FEATURE_FREEZE_BIT |
- OMAP_BANDGAP_FEATURE_TALERT,
+const struct ti_bandgap_data omap5430_data = {
+ .features = TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+ TI_BANDGAP_FEATURE_FREEZE_BIT |
+ TI_BANDGAP_FEATURE_TALERT,
.fclock_name = "l3instr_ts_gclk_div",
.div_ck_name = "l3instr_ts_gclk_div",
.conv_table = omap5430_adc_to_temp,
.adc_start_val = OMAP5430_ADC_START_VALUE,
.adc_end_val = OMAP5430_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap5430_mpu_temp_sensor_registers,
.ts_data = &omap5430_mpu_temp_sensor_data,
.domain = "cpu",
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
.slope = OMAP_GRADIENT_SLOPE_5430_CPU,
.constant = OMAP_GRADIENT_CONST_5430_CPU,
.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU,
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 5a8ae9c..a09ebfc 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -1,5 +1,5 @@
/*
- * OMAP4 Bandgap temperature sensor driver
+ * TI Bandgap temperature sensor driver
*
* Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
* Author: J Keerthy <j-keerthy@ti.com>
@@ -45,27 +45,27 @@
/*** Helper functions to access registers and their bitfields ***/
/**
- * omap_bandgap_readl() - simple read helper function
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_readl() - simple read helper function
+ * @bgp: pointer to ti_bandgap structure
* @reg: desired register (offset) to be read
*
* Helper function to read bandgap registers. It uses the io remapped area.
* Returns the register value.
*/
-static u32 omap_bandgap_readl(struct omap_bandgap *bgp, u32 reg)
+static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
{
return readl(bgp->base + reg);
}
/**
- * omap_bandgap_writel() - simple write helper function
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_writel() - simple write helper function
+ * @bgp: pointer to ti_bandgap structure
* @val: desired register value to be written
* @reg: desired register (offset) to be written
*
* Helper function to write bandgap registers. It uses the io remapped area.
*/
-static void omap_bandgap_writel(struct omap_bandgap *bgp, u32 val, u32 reg)
+static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg)
{
writel(val, bgp->base + reg);
}
@@ -82,27 +82,27 @@ do { \
u32 r; \
\
t = bgp->conf->sensors[(id)].registers; \
- r = omap_bandgap_readl(bgp, t->reg); \
+ r = ti_bandgap_readl(bgp, t->reg); \
r &= ~t->mask; \
r |= (val) << __ffs(t->mask); \
- omap_bandgap_writel(bgp, r, t->reg); \
+ ti_bandgap_writel(bgp, r, t->reg); \
} while (0)
/*** Basic helper functions ***/
/**
- * omap_bandgap_power() - controls the power state of a bandgap device
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_power() - controls the power state of a bandgap device
+ * @bgp: pointer to ti_bandgap structure
* @on: desired power state (1 - on, 0 - off)
*
* Used to power on/off a bandgap device instance. Only used on those
* that features tempsoff bit.
*/
-static int omap_bandgap_power(struct omap_bandgap *bgp, bool on)
+static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
int i;
- if (!OMAP_BANDGAP_HAS(bgp, POWER_SWITCH))
+ if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH))
goto exit;
for (i = 0; i < bgp->conf->sensor_count; i++)
@@ -114,8 +114,8 @@ exit:
}
/**
- * omap_bandgap_read_temp() - helper function to read sensor temperature
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_read_temp() - helper function to read sensor temperature
+ * @bgp: pointer to ti_bandgap structure
* @id: bandgap sensor id
*
* Function to concentrate the steps to read sensor temperature register.
@@ -123,7 +123,7 @@ exit:
* it might be needed to freeze the bandgap state machine, before fetching
* the register value.
*/
-static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
+static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
{
struct temp_sensor_registers *tsr;
u32 temp, reg;
@@ -131,7 +131,7 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
tsr = bgp->conf->sensors[id].registers;
reg = tsr->temp_sensor_ctrl;
- if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+ if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
/*
* In case we cannot read from cur_dtemp / dtemp_0,
@@ -141,10 +141,10 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
}
/* read temperature */
- temp = omap_bandgap_readl(bgp, reg);
+ temp = ti_bandgap_readl(bgp, reg);
temp &= tsr->bgap_dtemp_mask;
- if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT))
+ if (TI_BANDGAP_HAS(bgp, FREEZE_BIT))
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
return temp;
@@ -153,9 +153,9 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
/*** IRQ handlers ***/
/**
- * omap_bandgap_talert_irq_handler() - handles Temperature alert IRQs
+ * ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs
* @irq: IRQ number
- * @data: private data (struct omap_bandgap *)
+ * @data: private data (struct ti_bandgap *)
*
* This is the Talert handler. Use it only if bandgap device features
* HAS(TALERT). This handler goes over all sensors and checks their
@@ -163,9 +163,9 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
* it will reset the event mask to wait for the opposite event (next event).
* Every time there is a new event, it will be reported to thermal layer.
*/
-static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
+static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
{
- struct omap_bandgap *bgp = data;
+ struct ti_bandgap *bgp = data;
struct temp_sensor_registers *tsr;
u32 t_hot = 0, t_cold = 0, ctrl;
int i;
@@ -173,7 +173,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
spin_lock(&bgp->lock);
for (i = 0; i < bgp->conf->sensor_count; i++) {
tsr = bgp->conf->sensors[i].registers;
- ctrl = omap_bandgap_readl(bgp, tsr->bgap_status);
+ ctrl = ti_bandgap_readl(bgp, tsr->bgap_status);
/* Read the status of t_hot */
t_hot = ctrl & tsr->status_hot_mask;
@@ -184,7 +184,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
if (!t_cold && !t_hot)
continue;
- ctrl = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+ ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
/*
* One TALERT interrupt: Two sources
* If the interrupt is due to t_hot then mask t_hot and
@@ -198,7 +198,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
ctrl |= tsr->mask_hot_mask;
}
- omap_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
+ ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
dev_dbg(bgp->dev,
"%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
@@ -215,7 +215,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
}
/**
- * omap_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
+ * ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
* @irq: IRQ number
* @data: private data (unused)
*
@@ -223,7 +223,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
* HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
* the system.
*/
-static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
+static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
{
pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n",
__func__);
@@ -236,8 +236,8 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
/*** Helper functions which manipulate conversion ADC <-> mi Celsius ***/
/**
- * omap_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
+ * @bgp: struct ti_bandgap pointer
* @adc_val: value in ADC representation
* @t: address where to write the resulting temperature in mCelsius
*
@@ -246,10 +246,9 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bgp,
- int adc_val, int *t)
+int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
- struct omap_bandgap_data *conf = bgp->conf;
+ struct ti_bandgap_data *conf = bgp->conf;
int ret = 0;
/* look up for temperature in the table and return the temperature */
@@ -265,8 +264,8 @@ exit:
}
/**
- * omap_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
+ * @bgp: struct ti_bandgap pointer
* @temp: value in mCelsius
* @adc: address where to write the resulting temperature in ADC representation
*
@@ -275,10 +274,9 @@ exit:
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_mcelsius_to_adc(struct omap_bandgap *bgp, long temp,
- int *adc)
+int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
- struct omap_bandgap_data *conf = bgp->conf;
+ struct ti_bandgap_data *conf = bgp->conf;
const int *conv_table = bgp->conf->conv_table;
int high, low, mid, ret = 0;
@@ -306,8 +304,8 @@ exit:
}
/**
- * omap_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
+ * @bgp: struct ti_bandgap pointer
* @adc_val: temperature value in ADC representation
* @hyst_val: hysteresis value in mCelsius
* @sum: address where to write the resulting temperature (in ADC scale)
@@ -316,8 +314,8 @@ exit:
* Returns 0 on success, -ERANGE otherwise.
*/
static
-int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val,
- int hyst_val, u32 *sum)
+int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
+ u32 *sum)
{
int temp, ret;
@@ -325,13 +323,13 @@ int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val,
* Need to add in the mcelsius domain, so we have a temperature
* the conv_table range
*/
- ret = omap_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
if (ret < 0)
goto exit;
temp += hyst_val;
- ret = omap_bandgap_mcelsius_to_adc(bgp, temp, sum);
+ ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
exit:
return ret;
@@ -340,25 +338,25 @@ exit:
/*** Helper functions handling device Alert/Shutdown signals ***/
/**
- * omap_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
+ * @bgp: struct ti_bandgap pointer
* @t_hot: hot temperature value to trigger alert signal
* @t_cold: cold temperature value to trigger alert signal
*
* Checks the requested t_hot and t_cold values and configures the IRQ event
* masks accordingly. Call this function only if bandgap features HAS(TALERT).
*/
-static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
- u32 t_hot, u32 t_cold)
+static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
+ u32 t_hot, u32 t_cold)
{
struct temp_sensor_registers *tsr;
u32 temp, reg_val;
/* Read the current on die temperature */
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
tsr = bgp->conf->sensors[id].registers;
- reg_val = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+ reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
if (temp < t_hot)
reg_val |= tsr->mask_hot_mask;
@@ -369,12 +367,12 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
reg_val |= tsr->mask_cold_mask;
else
reg_val &= ~tsr->mask_cold_mask;
- omap_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
+ ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
}
/**
- * omap_bandgap_update_alert_threshold() - sequence to update thresholds
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_update_alert_threshold() - sequence to update thresholds
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
* @val: value (ADC) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -386,9 +384,8 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
* and configures the thresholds so that t_hot is always greater than t_cold.
* Call this function only if bandgap features HAS(TALERT).
*/
-static
-int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
- int val, bool hot)
+static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
+ int val, bool hot)
{
struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
struct temp_sensor_registers *tsr;
@@ -398,7 +395,7 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
tsr = bgp->conf->sensors[id].registers;
/* obtain the current value */
- thresh_val = omap_bandgap_readl(bgp, tsr->bgap_threshold);
+ thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold);
t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
__ffs(tsr->threshold_tcold_mask);
t_hot = (thresh_val & tsr->threshold_thot_mask) >>
@@ -410,13 +407,13 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
if (t_cold < t_hot) {
if (hot)
- err = omap_bandgap_add_hyst(bgp, t_hot,
- -ts_data->hyst_val,
- &t_cold);
+ err = ti_bandgap_add_hyst(bgp, t_hot,
+ -ts_data->hyst_val,
+ &t_cold);
else
- err = omap_bandgap_add_hyst(bgp, t_cold,
- ts_data->hyst_val,
- &t_hot);
+ err = ti_bandgap_add_hyst(bgp, t_cold,
+ ts_data->hyst_val,
+ &t_hot);
}
/* write the new threshold values */
@@ -424,7 +421,7 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask));
reg_val |= thresh_val & ~tsr->threshold_tcold_mask;
reg_val |= (t_cold << __ffs(tsr->threshold_tcold_mask));
- omap_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
+ ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
if (err) {
dev_err(bgp->dev, "failed to reprogram thot threshold\n");
@@ -432,20 +429,20 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
goto exit;
}
- omap_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
+ ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
exit:
return err;
}
/**
- * omap_bandgap_validate() - helper to check the sanity of a struct omap_bandgap
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
*
* Checks if the bandgap pointer is valid and if the sensor id is also
* applicable.
*/
-static inline int omap_bandgap_validate(struct omap_bandgap *bgp, int id)
+static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
int ret = 0;
@@ -466,8 +463,8 @@ exit:
}
/**
- * _omap_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
- * @bgp: struct omap_bandgap pointer
+ * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -478,19 +475,19 @@ exit:
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val,
- bool hot)
+int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
+ bool hot)
{
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *tsr;
u32 adc_val;
int ret;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ if (!TI_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
@@ -508,12 +505,12 @@ int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val,
if (ret)
goto exit;
- ret = omap_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
+ ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
if (ret < 0)
goto exit;
spin_lock(&bgp->lock);
- omap_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
+ ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
spin_unlock(&bgp->lock);
exit:
@@ -521,8 +518,8 @@ exit:
}
/**
- * _omap_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
- * @bgp: struct omap_bandgap pointer
+ * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a threshold
* @hot: desired threshold to be read. true if threshold hot, false if
@@ -532,18 +529,18 @@ exit:
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id,
- int *val, bool hot)
+int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
+ int *val, bool hot)
{
struct temp_sensor_registers *tsr;
u32 temp, mask;
int ret = 0;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ if (!TI_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
@@ -554,9 +551,9 @@ int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id,
else
mask = tsr->threshold_tcold_mask;
- temp = omap_bandgap_readl(bgp, tsr->bgap_threshold);
+ temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
temp = (temp & mask) >> __ffs(mask);
- ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret) {
dev_err(bgp->dev, "failed to read thot\n");
ret = -EIO;
@@ -572,83 +569,81 @@ exit:
/*** Exposed APIs ***/
/**
- * omap_bandgap_read_thot() - reads sensor current thot
+ * ti_bandgap_read_thot() - reads sensor current thot
* @bgp - pointer to bandgap instance
* @id - sensor id
* @thot - resulting current thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id,
- int *thot)
+int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
{
- return _omap_bandgap_read_threshold(bgp, id, thot, true);
+ return _ti_bandgap_read_threshold(bgp, id, thot, true);
}
/**
- * omap_bandgap_write_thot() - sets sensor current thot
+ * ti_bandgap_write_thot() - sets sensor current thot
* @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val)
+int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bgp, id, val, true);
+ return _ti_bandgap_write_threshold(bgp, id, val, true);
}
/**
- * omap_bandgap_read_tcold() - reads sensor current tcold
+ * ti_bandgap_read_tcold() - reads sensor current tcold
* @bgp - pointer to bandgap instance
* @id - sensor id
* @tcold - resulting current tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id,
- int *tcold)
+int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
{
- return _omap_bandgap_read_threshold(bgp, id, tcold, false);
+ return _ti_bandgap_read_threshold(bgp, id, tcold, false);
}
/**
- * omap_bandgap_write_tcold() - sets the sensor tcold
+ * ti_bandgap_write_tcold() - sets the sensor tcold
* @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val)
+int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bgp, id, val, false);
+ return _ti_bandgap_write_threshold(bgp, id, val, false);
}
/**
- * omap_bandgap_read_update_interval() - read the sensor update interval
+ * ti_bandgap_read_update_interval() - read the sensor update interval
* @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - resulting update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
- int *interval)
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+ int *interval)
{
struct temp_sensor_registers *tsr;
u32 time;
int ret;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (!TI_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
tsr = bgp->conf->sensors[id].registers;
- time = omap_bandgap_readl(bgp, tsr->bgap_counter);
+ time = ti_bandgap_readl(bgp, tsr->bgap_counter);
time = (time & tsr->counter_mask) >> __ffs(tsr->counter_mask);
time = time * 1000 / bgp->clk_rate;
@@ -658,21 +653,21 @@ int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
}
/**
- * omap_bandgap_write_update_interval() - set the update interval
+ * ti_bandgap_write_update_interval() - set the update interval
* @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - desired update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_update_interval(struct omap_bandgap *bgp,
- int id, u32 interval)
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
+ int id, u32 interval)
{
- int ret = omap_bandgap_validate(bgp, id);
+ int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (!TI_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
interval = interval * bgp->clk_rate / 1000;
@@ -684,28 +679,28 @@ int omap_bandgap_write_update_interval(struct omap_bandgap *bgp,
}
/**
- * omap_bandgap_read_temperature() - report current temperature
+ * ti_bandgap_read_temperature() - report current temperature
* @bgp - pointer to bandgap instance
* @id - sensor id
* @temperature - resulting temperature
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
- int *temperature)
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
+ int *temperature)
{
u32 temp;
int ret;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
spin_lock(&bgp->lock);
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
spin_unlock(&bgp->lock);
- ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
@@ -715,7 +710,7 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
}
/**
- * omap_bandgap_set_sensor_data() - helper function to store thermal
+ * ti_bandgap_set_sensor_data() - helper function to store thermal
* framework related data.
* @bgp - pointer to bandgap instance
* @id - sensor id
@@ -723,10 +718,9 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
- void *data)
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
{
- int ret = omap_bandgap_validate(bgp, id);
+ int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
@@ -736,16 +730,16 @@ int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
}
/**
- * omap_bandgap_get_sensor_data() - helper function to get thermal
+ * ti_bandgap_get_sensor_data() - helper function to get thermal
* framework related data.
* @bgp - pointer to bandgap instance
* @id - sensor id
*
* returns data stored by set function with sensor id on success or NULL
*/
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id)
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
{
- int ret = omap_bandgap_validate(bgp, id);
+ int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ERR_PTR(ret);
@@ -755,29 +749,29 @@ void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id)
/*** Helper functions used during device initialization ***/
/**
- * omap_bandgap_force_single_read() - executes 1 single ADC conversion
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_force_single_read() - executes 1 single ADC conversion
+ * @bgp: pointer to struct ti_bandgap
* @id: sensor id which it is desired to read 1 temperature
*
* Used to initialize the conversion state machine and set it to a valid
* state. Called during device initialization and context restore events.
*/
static int
-omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id)
+ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
{
u32 temp = 0, counter = 1000;
/* Select single conversion mode */
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
/* Start of Conversion = 1 */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
/* Wait until DTEMP is updated */
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
while ((temp == 0) && --counter)
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
/* REVISIT: Check correct condition for end of conversion */
/* Start of Conversion = 0 */
@@ -787,21 +781,21 @@ omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id)
}
/**
- * omap_bandgap_set_continous_mode() - One time enabling of continuous mode
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
+ * @bgp: pointer to struct ti_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
* be used for junction temperature monitoring, it is desirable that the
* sensors are operational all the time, so that alerts are generated
* properly.
*/
-static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
+static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
{
int i;
for (i = 0; i < bgp->conf->sensor_count; i++) {
/* Perform a single read just before enabling continuous */
- omap_bandgap_force_single_read(bgp, i);
+ ti_bandgap_force_single_read(bgp, i);
RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
}
@@ -809,8 +803,8 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
}
/**
- * omap_bandgap_tshut_init() - setup and initialize tshut handling
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_tshut_init() - setup and initialize tshut handling
+ * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TSHUT).
@@ -820,8 +814,8 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
* one of the bandgap sensors violates the TSHUT high/hot threshold.
* And in that case, the system must go off.
*/
-static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
- struct platform_device *pdev)
+static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
+ struct platform_device *pdev)
{
int gpio_nr = bgp->tshut_gpio;
int status;
@@ -838,10 +832,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
return status;
}
- status = request_irq(gpio_to_irq(gpio_nr),
- omap_bandgap_tshut_irq_handler,
- IRQF_TRIGGER_RISING, "tshut",
- NULL);
+ status = request_irq(gpio_to_irq(gpio_nr), ti_bandgap_tshut_irq_handler,
+ IRQF_TRIGGER_RISING, "tshut", NULL);
if (status) {
gpio_free(gpio_nr);
dev_err(bgp->dev, "request irq failed for TSHUT");
@@ -851,8 +843,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
}
/**
- * omap_bandgap_alert_init() - setup and initialize talert handling
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_alert_init() - setup and initialize talert handling
+ * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TALERT).
@@ -861,8 +853,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
* are violated. In these situation, the driver must reprogram the thresholds,
* accordingly to specified policy.
*/
-static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
- struct platform_device *pdev)
+static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
+ struct platform_device *pdev)
{
int ret;
@@ -872,7 +864,7 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
return bgp->irq;
}
ret = request_threaded_irq(bgp->irq, NULL,
- omap_bandgap_talert_irq_handler,
+ ti_bandgap_talert_irq_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"talert", bgp);
if (ret) {
@@ -884,20 +876,20 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
}
/**
- * omap_bandgap_build() - parse DT and setup a struct omap_bandgap
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_build() - parse DT and setup a struct ti_bandgap
+ * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Used to read the device tree properties accordingly to the bandgap
* matching version. Based on bandgap version and its capabilities it
- * will build a struct omap_bandgap out of the required DT entries.
+ * will build a struct ti_bandgap out of the required DT entries.
*/
-static const struct of_device_id of_omap_bandgap_match[];
-static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
+static const struct of_device_id of_ti_bandgap_match[];
+static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *of_id;
- struct omap_bandgap *bgp;
+ struct ti_bandgap *bgp;
struct resource *res;
u32 prop;
int i;
@@ -908,14 +900,14 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
return ERR_PTR(-EINVAL);
}
- bgp = devm_kzalloc(&pdev->dev, sizeof(struct omap_bandgap),
+ bgp = devm_kzalloc(&pdev->dev, sizeof(struct ti_bandgap),
GFP_KERNEL);
if (!bgp) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
}
- of_id = of_match_device(of_omap_bandgap_match, &pdev->dev);
+ of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
if (of_id)
bgp->conf = of_id->data;
@@ -935,7 +927,7 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
i++;
} while (res);
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) {
dev_err(&pdev->dev, "missing tshut gpio in device tree\n");
return ERR_PTR(-EINVAL);
@@ -954,20 +946,20 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
/*** Device driver call backs ***/
static
-int omap_bandgap_probe(struct platform_device *pdev)
+int ti_bandgap_probe(struct platform_device *pdev)
{
- struct omap_bandgap *bgp;
+ struct ti_bandgap *bgp;
int clk_rate, ret = 0, i;
- bgp = omap_bandgap_build(pdev);
+ bgp = ti_bandgap_build(pdev);
if (IS_ERR_OR_NULL(bgp)) {
dev_err(&pdev->dev, "failed to fetch platform data\n");
return PTR_ERR(bgp);
}
bgp->dev = &pdev->dev;
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
- ret = omap_bandgap_tshut_init(bgp, pdev);
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+ ret = ti_bandgap_tshut_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize system tshut IRQ\n");
@@ -1000,7 +992,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
* it is an untrimmed sample and the temperatures
* may not be accurate
*/
- val = omap_bandgap_readl(bgp, tsr->bgap_efuse);
+ val = ti_bandgap_readl(bgp, tsr->bgap_efuse);
if (ret || !val)
dev_info(&pdev->dev,
"Non-trimmed BGAP, Temp not accurate\n");
@@ -1020,7 +1012,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");
bgp->clk_rate = clk_rate;
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_prepare_enable(bgp->fclock);
@@ -1028,10 +1020,10 @@ int omap_bandgap_probe(struct platform_device *pdev)
bgp->dev = &pdev->dev;
platform_set_drvdata(pdev, bgp);
- omap_bandgap_power(bgp, true);
+ ti_bandgap_power(bgp, true);
/* Set default counter to 1 for now */
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
for (i = 0; i < bgp->conf->sensor_count; i++)
RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);
@@ -1041,7 +1033,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
ts_data = bgp->conf->sensors[i].ts_data;
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
/* Set initial Talert thresholds */
RMW_BITS(bgp, i, bgap_threshold,
threshold_tcold_mask, ts_data->t_cold);
@@ -1052,7 +1044,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
}
- if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
/* Set initial Tshut thresholds */
RMW_BITS(bgp, i, tshut_threshold,
tshut_hot_mask, ts_data->tshut_hot);
@@ -1061,11 +1053,11 @@ int omap_bandgap_probe(struct platform_device *pdev)
}
}
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
- omap_bandgap_set_continuous_mode(bgp);
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+ ti_bandgap_set_continuous_mode(bgp);
/* Set .250 seconds time as default counter */
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
for (i = 0; i < bgp->conf->sensor_count; i++)
RMW_BITS(bgp, i, bgap_counter, counter_mask,
bgp->clk_rate / 4);
@@ -1087,8 +1079,8 @@ int omap_bandgap_probe(struct platform_device *pdev)
* might be called as soon as it is enabled where as rest of framework
* is still getting initialised.
*/
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
- ret = omap_bandgap_talert_init(bgp, pdev);
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
+ ret = ti_bandgap_talert_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
i = bgp->conf->sensor_count;
@@ -1099,13 +1091,13 @@ int omap_bandgap_probe(struct platform_device *pdev)
return 0;
disable_clk:
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
put_clks:
clk_put(bgp->fclock);
clk_put(bgp->div_clk);
free_irqs:
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
gpio_free(bgp->tshut_gpio);
}
@@ -1114,9 +1106,9 @@ free_irqs:
}
static
-int omap_bandgap_remove(struct platform_device *pdev)
+int ti_bandgap_remove(struct platform_device *pdev)
{
- struct omap_bandgap *bgp = platform_get_drvdata(pdev);
+ struct ti_bandgap *bgp = platform_get_drvdata(pdev);
int i;
/* First thing is to remove sensor interfaces */
@@ -1128,17 +1120,17 @@ int omap_bandgap_remove(struct platform_device *pdev)
bgp->conf->remove_sensor(bgp, i);
}
- omap_bandgap_power(bgp, false);
+ ti_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
clk_put(bgp->fclock);
clk_put(bgp->div_clk);
- if (OMAP_BANDGAP_HAS(bgp, TALERT))
+ if (TI_BANDGAP_HAS(bgp, TALERT))
free_irq(bgp->irq, bgp);
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
gpio_free(bgp->tshut_gpio);
}
@@ -1147,7 +1139,7 @@ int omap_bandgap_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp)
+static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
{
int i;
@@ -1158,28 +1150,28 @@ static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp)
rval = &bgp->conf->sensors[i].regval;
tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
- rval->bg_mode_ctrl = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+ rval->bg_mode_ctrl = ti_bandgap_readl(bgp,
tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
- rval->bg_counter = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
+ rval->bg_counter = ti_bandgap_readl(bgp,
tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
- rval->bg_threshold = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
+ rval->bg_threshold = ti_bandgap_readl(bgp,
tsr->bgap_threshold);
- rval->bg_ctrl = omap_bandgap_readl(bgp,
+ rval->bg_ctrl = ti_bandgap_readl(bgp,
tsr->bgap_mask_ctrl);
}
- if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
- rval->tshut_threshold = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ rval->tshut_threshold = ti_bandgap_readl(bgp,
tsr->tshut_threshold);
}
return 0;
}
-static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp)
+static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
{
int i;
@@ -1191,70 +1183,70 @@ static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp)
rval = &bgp->conf->sensors[i].regval;
tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
- val = omap_bandgap_readl(bgp, tsr->bgap_counter);
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
+ val = ti_bandgap_readl(bgp, tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
- omap_bandgap_writel(bgp, rval->tshut_threshold,
- tsr->tshut_threshold);
+ if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ ti_bandgap_writel(bgp, rval->tshut_threshold,
+ tsr->tshut_threshold);
/* Force immediate temperature measurement and update
* of the DTEMP field
*/
- omap_bandgap_force_single_read(bgp, i);
-
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
- omap_bandgap_writel(bgp, rval->bg_counter,
- tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
- omap_bandgap_writel(bgp, rval->bg_mode_ctrl,
- tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
- omap_bandgap_writel(bgp, rval->bg_threshold,
- tsr->bgap_threshold);
- omap_bandgap_writel(bgp, rval->bg_ctrl,
- tsr->bgap_mask_ctrl);
+ ti_bandgap_force_single_read(bgp, i);
+
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
+ ti_bandgap_writel(bgp, rval->bg_counter,
+ tsr->bgap_counter);
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+ ti_bandgap_writel(bgp, rval->bg_mode_ctrl,
+ tsr->bgap_mode_ctrl);
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
+ ti_bandgap_writel(bgp, rval->bg_threshold,
+ tsr->bgap_threshold);
+ ti_bandgap_writel(bgp, rval->bg_ctrl,
+ tsr->bgap_mask_ctrl);
}
}
return 0;
}
-static int omap_bandgap_suspend(struct device *dev)
+static int ti_bandgap_suspend(struct device *dev)
{
- struct omap_bandgap *bgp = dev_get_drvdata(dev);
+ struct ti_bandgap *bgp = dev_get_drvdata(dev);
int err;
- err = omap_bandgap_save_ctxt(bgp);
- omap_bandgap_power(bgp, false);
+ err = ti_bandgap_save_ctxt(bgp);
+ ti_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
return err;
}
-static int omap_bandgap_resume(struct device *dev)
+static int ti_bandgap_resume(struct device *dev)
{
- struct omap_bandgap *bgp = dev_get_drvdata(dev);
+ struct ti_bandgap *bgp = dev_get_drvdata(dev);
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_prepare_enable(bgp->fclock);
- omap_bandgap_power(bgp, true);
+ ti_bandgap_power(bgp, true);
- return omap_bandgap_restore_ctxt(bgp);
+ return ti_bandgap_restore_ctxt(bgp);
}
-static const struct dev_pm_ops omap_bandgap_dev_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(omap_bandgap_suspend,
- omap_bandgap_resume)
+static const struct dev_pm_ops ti_bandgap_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(ti_bandgap_suspend,
+ ti_bandgap_resume)
};
-#define DEV_PM_OPS (&omap_bandgap_dev_pm_ops)
+#define DEV_PM_OPS (&ti_bandgap_dev_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif
-static const struct of_device_id of_omap_bandgap_match[] = {
+static const struct of_device_id of_ti_bandgap_match[] = {
#ifdef CONFIG_OMAP4_THERMAL
{
.compatible = "ti,omap4430-bandgap",
@@ -1278,21 +1270,21 @@ static const struct of_device_id of_omap_bandgap_match[] = {
/* Sentinel */
{ },
};
-MODULE_DEVICE_TABLE(of, of_omap_bandgap_match);
+MODULE_DEVICE_TABLE(of, of_ti_bandgap_match);
-static struct platform_driver omap_bandgap_sensor_driver = {
- .probe = omap_bandgap_probe,
- .remove = omap_bandgap_remove,
+static struct platform_driver ti_bandgap_sensor_driver = {
+ .probe = ti_bandgap_probe,
+ .remove = ti_bandgap_remove,
.driver = {
- .name = "omap-bandgap",
+ .name = "ti-soc-thermal",
.pm = DEV_PM_OPS,
- .of_match_table = of_omap_bandgap_match,
+ .of_match_table = of_ti_bandgap_match,
},
};
-module_platform_driver(omap_bandgap_sensor_driver);
+module_platform_driver(ti_bandgap_sensor_driver);
MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:omap-bandgap");
+MODULE_ALIAS("platform:ti-soc-thermal");
MODULE_AUTHOR("Texas Instrument Inc.");
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
index ad83be8..72c760f 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
@@ -20,8 +20,8 @@
* 02110-1301 USA
*
*/
-#ifndef __OMAP_BANDGAP_H
-#define __OMAP_BANDGAP_H
+#ifndef __TI_BANDGAP_H
+#define __TI_BANDGAP_H
#include <linux/spinlock.h>
#include <linux/types.h>
@@ -30,22 +30,22 @@
/**
* DOC: bandgap driver data structure
* ==================================
- * +---------------------+ +-----------------+
- * | struct omap_bandgap |-->| struct device * |
- * +----------+----------+ +-----------------+
+ * +-------------------+ +-----------------+
+ * | struct ti_bandgap |-->| struct device * |
+ * +----------+--------+ +-----------------+
* |
* |
* V
- * +--------------------------+
- * | struct omap_bandgap_data |
- * +--------------------------+
+ * +------------------------+
+ * | struct ti_bandgap_data |
+ * +------------------------+
* |
* |
* * (Array of)
* +------------+------------------------------------------------------+
- * | +----------+--------------+ +-------------------------+ |
- * | | struct omap_temp_sensor |-->| struct temp_sensor_data | |
- * | +-------------------------+ +------------+------------+ |
+ * | +----------+------------+ +-------------------------+ |
+ * | | struct ti_temp_sensor |-->| struct temp_sensor_data | |
+ * | +-----------------------+ +------------+------------+ |
* | | |
* | +--------------------------+ |
* | V V |
@@ -56,7 +56,7 @@
* +-------------------------------------------------------------------+
*
* Above is a simple diagram describing how the data structure below
- * are organized. For each bandgap device there should be a omap_bandgap_data
+ * are organized. For each bandgap device there should be a ti_bandgap_data
* containing the device instance configuration, as well as, an array of
* sensors, representing every sensor instance present in this bandgap.
*/
@@ -187,16 +187,16 @@ struct temp_sensor_data {
u32 update_int2; /* not used */
};
-struct omap_bandgap_data;
+struct ti_bandgap_data;
/**
- * struct omap_bandgap - bandgap device structure
+ * struct ti_bandgap - bandgap device structure
* @dev: struct device pointer
* @base: io memory base address
* @conf: struct with bandgap configuration set (# sensors, conv_table, etc)
* @fclock: pointer to functional clock of temperature sensor
* @div_clk: pointer to divider clock of temperature sensor fclk
- * @bg_mutex: mutex for omap_bandgap structure
+ * @bg_mutex: mutex for ti_bandgap structure
* @irq: MPU IRQ number for thermal alert
* @tshut_gpio: GPIO where Tshut signal is routed
* @clk_rate: Holds current clock rate
@@ -205,10 +205,10 @@ struct omap_bandgap_data;
* It holds most of the dynamic stuff. Configurations and sensor specific
* entries are inside the @conf structure.
*/
-struct omap_bandgap {
+struct ti_bandgap {
struct device *dev;
void __iomem *base;
- struct omap_bandgap_data *conf;
+ struct ti_bandgap_data *conf;
struct clk *fclock;
struct clk *div_clk;
spinlock_t lock; /* shields this struct */
@@ -237,7 +237,7 @@ struct temp_sensor_regval {
};
/**
- * struct omap_temp_sensor - bandgap temperature sensor configuration data
+ * struct ti_temp_sensor - bandgap temperature sensor configuration data
* @ts_data: pointer to struct with thresholds, limits of temperature sensor
* @registers: pointer to the list of register offsets and bitfields
* @regval: temperature sensor register values
@@ -258,7 +258,7 @@ struct temp_sensor_regval {
* assess the gradient from hotspot, how to cooldown the domain when sensor
* reports too hot temperature.
*/
-struct omap_temp_sensor {
+struct ti_temp_sensor {
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *registers;
struct temp_sensor_regval regval;
@@ -269,56 +269,56 @@ struct omap_temp_sensor {
const int slope_pcb;
const int constant_pcb;
void *data;
- int (*register_cooling)(struct omap_bandgap *bgp, int id);
- int (*unregister_cooling)(struct omap_bandgap *bgp, int id);
+ int (*register_cooling)(struct ti_bandgap *bgp, int id);
+ int (*unregister_cooling)(struct ti_bandgap *bgp, int id);
};
/**
* DOC: omap bandgap feature types
*
- * OMAP_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
+ * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
* of a bandgap device instance is routed to the processor. This means
* the system must react and perform the shutdown by itself (handle an
* IRQ, for instance).
*
- * OMAP_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control
+ * TI_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control
* over the thermal shutdown configuration. This means that the thermal
* shutdown thresholds are programmable, for instance.
*
- * OMAP_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs
+ * TI_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs
* a signal representing violation of programmable alert thresholds.
*
- * OMAP_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which
+ * TI_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which
* mode, continuous or one shot, the bandgap device instance will operate.
*
- * OMAP_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows
+ * TI_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows
* programming the update interval of its internal state machine.
*
- * OMAP_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows
+ * TI_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows
* itself to be switched on/off.
*
- * OMAP_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap
+ * TI_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap
* device are gateable or not.
*
- * OMAP_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features
+ * TI_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features
* a history buffer that its update can be freezed/unfreezed.
*
- * OMAP_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
+ * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
* specific feature (above) or not. Return non-zero, if yes.
*/
-#define OMAP_BANDGAP_FEATURE_TSHUT BIT(0)
-#define OMAP_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1)
-#define OMAP_BANDGAP_FEATURE_TALERT BIT(2)
-#define OMAP_BANDGAP_FEATURE_MODE_CONFIG BIT(3)
-#define OMAP_BANDGAP_FEATURE_COUNTER BIT(4)
-#define OMAP_BANDGAP_FEATURE_POWER_SWITCH BIT(5)
-#define OMAP_BANDGAP_FEATURE_CLK_CTRL BIT(6)
-#define OMAP_BANDGAP_FEATURE_FREEZE_BIT BIT(7)
-#define OMAP_BANDGAP_HAS(b, f) \
- ((b)->conf->features & OMAP_BANDGAP_FEATURE_ ## f)
+#define TI_BANDGAP_FEATURE_TSHUT BIT(0)
+#define TI_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1)
+#define TI_BANDGAP_FEATURE_TALERT BIT(2)
+#define TI_BANDGAP_FEATURE_MODE_CONFIG BIT(3)
+#define TI_BANDGAP_FEATURE_COUNTER BIT(4)
+#define TI_BANDGAP_FEATURE_POWER_SWITCH BIT(5)
+#define TI_BANDGAP_FEATURE_CLK_CTRL BIT(6)
+#define TI_BANDGAP_FEATURE_FREEZE_BIT BIT(7)
+#define TI_BANDGAP_HAS(b, f) \
+ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
/**
- * struct omap_bandgap_data - omap bandgap data configuration structure
+ * struct ti_bandgap_data - omap bandgap data configuration structure
* @features: a bitwise flag set to describe the device features
* @conv_table: Pointer to ADC to temperature conversion table
* @adc_start_val: ADC conversion table starting value
@@ -337,7 +337,7 @@ struct omap_temp_sensor {
* their configuration representation, and how to export and unexport them to
* a thermal API.
*/
-struct omap_bandgap_data {
+struct ti_bandgap_data {
unsigned int features;
const int *conv_table;
u32 adc_start_val;
@@ -345,32 +345,31 @@ struct omap_bandgap_data {
char *fclock_name;
char *div_ck_name;
int sensor_count;
- int (*report_temperature)(struct omap_bandgap *bgp, int id);
- int (*expose_sensor)(struct omap_bandgap *bgp, int id, char *domain);
- int (*remove_sensor)(struct omap_bandgap *bgp, int id);
+ int (*report_temperature)(struct ti_bandgap *bgp, int id);
+ int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain);
+ int (*remove_sensor)(struct ti_bandgap *bgp, int id);
/* this needs to be at the end */
- struct omap_temp_sensor sensors[];
+ struct ti_temp_sensor sensors[];
};
-int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id, int *thot);
-int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val);
-int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id, int *tcold);
-int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val);
-int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
- int *interval);
-int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, int id,
- u32 interval);
-int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
+int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot);
+int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold);
+int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+ int *interval);
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id,
+ u32 interval);
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
int *temperature);
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
- void *data);
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id);
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
#ifdef CONFIG_OMAP4_THERMAL
-extern const struct omap_bandgap_data omap4430_data;
-extern const struct omap_bandgap_data omap4460_data;
-extern const struct omap_bandgap_data omap4470_data;
+extern const struct ti_bandgap_data omap4430_data;
+extern const struct ti_bandgap_data omap4460_data;
+extern const struct ti_bandgap_data omap4470_data;
#else
#define omap4430_data NULL
#define omap4460_data NULL
@@ -378,7 +377,7 @@ extern const struct omap_bandgap_data omap4470_data;
#endif
#ifdef CONFIG_OMAP5_THERMAL
-extern const struct omap_bandgap_data omap5430_data;
+extern const struct ti_bandgap_data omap5430_data;
#else
#define omap5430_data NULL
#endif
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
index feab2f4..fb50e7e 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
@@ -36,33 +36,33 @@
#include "ti-bandgap.h"
/* common data structures */
-struct omap_thermal_data {
- struct thermal_zone_device *omap_thermal;
+struct ti_thermal_data {
+ struct thermal_zone_device *ti_thermal;
struct thermal_cooling_device *cool_dev;
- struct omap_bandgap *bgp;
+ struct ti_bandgap *bgp;
enum thermal_device_mode mode;
struct work_struct thermal_wq;
int sensor_id;
};
-static void omap_thermal_work(struct work_struct *work)
+static void ti_thermal_work(struct work_struct *work)
{
- struct omap_thermal_data *data = container_of(work,
- struct omap_thermal_data, thermal_wq);
+ struct ti_thermal_data *data = container_of(work,
+ struct ti_thermal_data, thermal_wq);
- thermal_zone_device_update(data->omap_thermal);
+ thermal_zone_device_update(data->ti_thermal);
- dev_dbg(&data->omap_thermal->device, "updated thermal zone %s\n",
- data->omap_thermal->type);
+ dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n",
+ data->ti_thermal->type);
}
/**
- * omap_thermal_hotspot_temperature - returns sensor extrapolated temperature
+ * ti_thermal_hotspot_temperature - returns sensor extrapolated temperature
* @t: omap sensor temperature
* @s: omap sensor slope value
* @c: omap sensor const value
*/
-static inline int omap_thermal_hotspot_temperature(int t, int s, int c)
+static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
{
int delta = t * s / 1000 + c;
@@ -74,12 +74,12 @@ static inline int omap_thermal_hotspot_temperature(int t, int s, int c)
/* thermal zone ops */
/* Get temperature callback function for thermal zone*/
-static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
- unsigned long *temp)
+static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
{
- struct omap_thermal_data *data = thermal->devdata;
- struct omap_bandgap *bgp;
- struct omap_temp_sensor *s;
+ struct ti_thermal_data *data = thermal->devdata;
+ struct ti_bandgap *bgp;
+ struct ti_temp_sensor *s;
int ret, tmp, pcb_temp, slope, constant;
if (!data)
@@ -88,7 +88,7 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
bgp = data->bgp;
s = &bgp->conf->sensors[data->sensor_id];
- ret = omap_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
+ ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
if (ret)
return ret;
@@ -103,16 +103,16 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
slope = s->slope;
constant = s->constant;
}
- *temp = omap_thermal_hotspot_temperature(tmp, slope, constant);
+ *temp = ti_thermal_hotspot_temperature(tmp, slope, constant);
return ret;
}
/* Bind callback functions for thermal zone */
-static int omap_thermal_bind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
+static int ti_thermal_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
int id;
if (IS_ERR_OR_NULL(data))
@@ -132,10 +132,10 @@ static int omap_thermal_bind(struct thermal_zone_device *thermal,
}
/* Unbind callback functions for thermal zone */
-static int omap_thermal_unbind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
+static int ti_thermal_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
if (IS_ERR_OR_NULL(data))
return -ENODEV;
@@ -149,10 +149,10 @@ static int omap_thermal_unbind(struct thermal_zone_device *thermal,
}
/* Get mode callback functions for thermal zone */
-static int omap_thermal_get_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode *mode)
+static int ti_thermal_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
if (data)
*mode = data->mode;
@@ -161,38 +161,38 @@ static int omap_thermal_get_mode(struct thermal_zone_device *thermal,
}
/* Set mode callback functions for thermal zone */
-static int omap_thermal_set_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode mode)
+static int ti_thermal_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
- if (!data->omap_thermal) {
+ if (!data->ti_thermal) {
dev_notice(&thermal->device, "thermal zone not registered\n");
return 0;
}
- mutex_lock(&data->omap_thermal->lock);
+ mutex_lock(&data->ti_thermal->lock);
if (mode == THERMAL_DEVICE_ENABLED)
- data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+ data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
else
- data->omap_thermal->polling_delay = 0;
+ data->ti_thermal->polling_delay = 0;
- mutex_unlock(&data->omap_thermal->lock);
+ mutex_unlock(&data->ti_thermal->lock);
data->mode = mode;
- thermal_zone_device_update(data->omap_thermal);
+ thermal_zone_device_update(data->ti_thermal);
dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n",
- data->omap_thermal->polling_delay);
+ data->ti_thermal->polling_delay);
return 0;
}
/* Get trip type callback functions for thermal zone */
-static int omap_thermal_get_trip_type(struct thermal_zone_device *thermal,
- int trip, enum thermal_trip_type *type)
+static int ti_thermal_get_trip_type(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trip_type *type)
{
- if (!omap_thermal_is_valid_trip(trip))
+ if (!ti_thermal_is_valid_trip(trip))
return -EINVAL;
if (trip + 1 == OMAP_TRIP_NUMBER)
@@ -204,41 +204,41 @@ static int omap_thermal_get_trip_type(struct thermal_zone_device *thermal,
}
/* Get trip temperature callback functions for thermal zone */
-static int omap_thermal_get_trip_temp(struct thermal_zone_device *thermal,
- int trip, unsigned long *temp)
+static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal,
+ int trip, unsigned long *temp)
{
- if (!omap_thermal_is_valid_trip(trip))
+ if (!ti_thermal_is_valid_trip(trip))
return -EINVAL;
- *temp = omap_thermal_get_trip_value(trip);
+ *temp = ti_thermal_get_trip_value(trip);
return 0;
}
/* Get critical temperature callback functions for thermal zone */
-static int omap_thermal_get_crit_temp(struct thermal_zone_device *thermal,
- unsigned long *temp)
+static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
{
/* shutdown zone */
- return omap_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp);
+ return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp);
}
-static struct thermal_zone_device_ops omap_thermal_ops = {
- .get_temp = omap_thermal_get_temp,
+static struct thermal_zone_device_ops ti_thermal_ops = {
+ .get_temp = ti_thermal_get_temp,
/* TODO: add .get_trend */
- .bind = omap_thermal_bind,
- .unbind = omap_thermal_unbind,
- .get_mode = omap_thermal_get_mode,
- .set_mode = omap_thermal_set_mode,
- .get_trip_type = omap_thermal_get_trip_type,
- .get_trip_temp = omap_thermal_get_trip_temp,
- .get_crit_temp = omap_thermal_get_crit_temp,
+ .bind = ti_thermal_bind,
+ .unbind = ti_thermal_unbind,
+ .get_mode = ti_thermal_get_mode,
+ .set_mode = ti_thermal_set_mode,
+ .get_trip_type = ti_thermal_get_trip_type,
+ .get_trip_temp = ti_thermal_get_trip_temp,
+ .get_crit_temp = ti_thermal_get_crit_temp,
};
-static struct omap_thermal_data
-*omap_thermal_build_data(struct omap_bandgap *bgp, int id)
+static struct ti_thermal_data
+*ti_thermal_build_data(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
@@ -248,69 +248,69 @@ static struct omap_thermal_data
data->sensor_id = id;
data->bgp = bgp;
data->mode = THERMAL_DEVICE_ENABLED;
- INIT_WORK(&data->thermal_wq, omap_thermal_work);
+ INIT_WORK(&data->thermal_wq, ti_thermal_work);
return data;
}
-int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
- char *domain)
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
+ char *domain)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bgp, id);
+ data = ti_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
/* TODO: remove TC1 TC2 */
/* Create thermal zone */
- data->omap_thermal = thermal_zone_device_register(domain,
- OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops,
+ data->ti_thermal = thermal_zone_device_register(domain,
+ OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops,
NULL, FAST_TEMP_MONITORING_RATE,
FAST_TEMP_MONITORING_RATE);
- if (IS_ERR_OR_NULL(data->omap_thermal)) {
+ if (IS_ERR_OR_NULL(data->ti_thermal)) {
dev_err(bgp->dev, "thermal zone device is NULL\n");
- return PTR_ERR(data->omap_thermal);
+ return PTR_ERR(data->ti_thermal);
}
- data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
- omap_bandgap_set_sensor_data(bgp, id, data);
+ data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+ ti_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
- thermal_zone_device_unregister(data->omap_thermal);
+ thermal_zone_device_unregister(data->ti_thermal);
return 0;
}
-int omap_thermal_report_sensor_temperature(struct omap_bandgap *bgp, int id)
+int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
schedule_work(&data->thermal_wq);
return 0;
}
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bgp, id);
+ data = ti_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
@@ -322,16 +322,16 @@ int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
"Failed to register cpufreq cooling device\n");
return PTR_ERR(data->cool_dev);
}
- omap_bandgap_set_sensor_data(bgp, id, data);
+ ti_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
cpufreq_cooling_unregister(data->cool_dev);
return 0;
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h
index 3ed4adb..ef6981c 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal.h
+++ b/drivers/staging/ti-soc-thermal/ti-thermal.h
@@ -60,47 +60,45 @@
/* helper macros */
/**
- * omap_thermal_get_trip_value - returns trip temperature based on index
+ * ti_thermal_get_trip_value - returns trip temperature based on index
* @i: trip index
*/
-#define omap_thermal_get_trip_value(i) \
+#define ti_thermal_get_trip_value(i) \
(OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP))
/**
- * omap_thermal_is_valid_trip - check for trip index
+ * ti_thermal_is_valid_trip - check for trip index
* @i: trip index
*/
-#define omap_thermal_is_valid_trip(trip) \
+#define ti_thermal_is_valid_trip(trip) \
((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
#ifdef CONFIG_TI_THERMAL
-int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
- char *domain);
-int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id);
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id);
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id);
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain);
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id);
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id);
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id);
#else
static inline
-int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
- char *domain)
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain)
{
return 0;
}
static inline
-int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
{
return 0;
}
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 05/12] staging: ti-soc-thermal: rename symbols to use better prefix
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Santosh Shilimkar, Benoit, Nishanth Menon, Dan Carpenter
As this driver has been renamed to cope with the chips it
is supposed to support, this patch also changes the symbol
names to use a proper prefix, so it is not suggestive that
this driver supports only OMAP devices.
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
.../staging/ti-soc-thermal/omap4-thermal-data.c | 64 ++--
.../staging/ti-soc-thermal/omap5-thermal-data.c | 16 +-
drivers/staging/ti-soc-thermal/ti-bandgap.c | 452 ++++++++++----------
drivers/staging/ti-soc-thermal/ti-bandgap.h | 123 +++---
drivers/staging/ti-soc-thermal/ti-thermal-common.c | 172 ++++----
drivers/staging/ti-soc-thermal/ti-thermal.h | 26 +-
6 files changed, 421 insertions(+), 432 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
index 97544f7..49d0324 100644
--- a/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap4-thermal-data.c
@@ -66,17 +66,17 @@ omap4430_adc_to_temp[OMAP4430_ADC_END_VALUE - OMAP4430_ADC_START_VALUE + 1] = {
};
/* OMAP4430 data */
-const struct omap_bandgap_data omap4430_data = {
- .features = OMAP_BANDGAP_FEATURE_MODE_CONFIG |
- OMAP_BANDGAP_FEATURE_CLK_CTRL |
- OMAP_BANDGAP_FEATURE_POWER_SWITCH,
+const struct ti_bandgap_data omap4430_data = {
+ .features = TI_BANDGAP_FEATURE_MODE_CONFIG |
+ TI_BANDGAP_FEATURE_CLK_CTRL |
+ TI_BANDGAP_FEATURE_POWER_SWITCH,
.fclock_name = "bandgap_fclk",
.div_ck_name = "bandgap_fclk",
.conv_table = omap4430_adc_to_temp,
.adc_start_val = OMAP4430_ADC_START_VALUE,
.adc_end_val = OMAP4430_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap4430_mpu_temp_sensor_registers,
@@ -86,8 +86,8 @@ const struct omap_bandgap_data omap4430_data = {
.constant = 20000,
.slope_pcb = 0,
.constant_pcb = 20000,
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
},
},
.sensor_count = 1,
@@ -201,21 +201,21 @@ omap4460_adc_to_temp[OMAP4460_ADC_END_VALUE - OMAP4460_ADC_START_VALUE + 1] = {
};
/* OMAP4460 data */
-const struct omap_bandgap_data omap4460_data = {
- .features = OMAP_BANDGAP_FEATURE_TSHUT |
- OMAP_BANDGAP_FEATURE_TSHUT_CONFIG |
- OMAP_BANDGAP_FEATURE_TALERT |
- OMAP_BANDGAP_FEATURE_MODE_CONFIG |
- OMAP_BANDGAP_FEATURE_POWER_SWITCH |
- OMAP_BANDGAP_FEATURE_CLK_CTRL |
- OMAP_BANDGAP_FEATURE_COUNTER,
+const struct ti_bandgap_data omap4460_data = {
+ .features = TI_BANDGAP_FEATURE_TSHUT |
+ TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+ TI_BANDGAP_FEATURE_TALERT |
+ TI_BANDGAP_FEATURE_MODE_CONFIG |
+ TI_BANDGAP_FEATURE_POWER_SWITCH |
+ TI_BANDGAP_FEATURE_CLK_CTRL |
+ TI_BANDGAP_FEATURE_COUNTER,
.fclock_name = "bandgap_ts_fclk",
.div_ck_name = "div_ts_ck",
.conv_table = omap4460_adc_to_temp,
.adc_start_val = OMAP4460_ADC_START_VALUE,
.adc_end_val = OMAP4460_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap4460_mpu_temp_sensor_registers,
@@ -225,29 +225,29 @@ const struct omap_bandgap_data omap4460_data = {
.constant = OMAP_GRADIENT_CONST_4460,
.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4460,
.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4460,
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
},
},
.sensor_count = 1,
};
/* OMAP4470 data */
-const struct omap_bandgap_data omap4470_data = {
- .features = OMAP_BANDGAP_FEATURE_TSHUT |
- OMAP_BANDGAP_FEATURE_TSHUT_CONFIG |
- OMAP_BANDGAP_FEATURE_TALERT |
- OMAP_BANDGAP_FEATURE_MODE_CONFIG |
- OMAP_BANDGAP_FEATURE_POWER_SWITCH |
- OMAP_BANDGAP_FEATURE_CLK_CTRL |
- OMAP_BANDGAP_FEATURE_COUNTER,
+const struct ti_bandgap_data omap4470_data = {
+ .features = TI_BANDGAP_FEATURE_TSHUT |
+ TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+ TI_BANDGAP_FEATURE_TALERT |
+ TI_BANDGAP_FEATURE_MODE_CONFIG |
+ TI_BANDGAP_FEATURE_POWER_SWITCH |
+ TI_BANDGAP_FEATURE_CLK_CTRL |
+ TI_BANDGAP_FEATURE_COUNTER,
.fclock_name = "bandgap_ts_fclk",
.div_ck_name = "div_ts_ck",
.conv_table = omap4460_adc_to_temp,
.adc_start_val = OMAP4460_ADC_START_VALUE,
.adc_end_val = OMAP4460_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap4460_mpu_temp_sensor_registers,
@@ -257,8 +257,8 @@ const struct omap_bandgap_data omap4470_data = {
.constant = OMAP_GRADIENT_CONST_4470,
.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_4470,
.constant_pcb = OMAP_GRADIENT_CONST_W_PCB_4470,
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
},
},
.sensor_count = 1,
diff --git a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
index 172b4ad..0afe9c8 100644
--- a/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
+++ b/drivers/staging/ti-soc-thermal/omap5-thermal-data.c
@@ -312,24 +312,24 @@ omap5430_adc_to_temp[
/* OMAP54xx ES2.0 data */
/* TODO : Need to update the slope/constant for ES2.0 silicon */
-const struct omap_bandgap_data omap5430_data = {
- .features = OMAP_BANDGAP_FEATURE_TSHUT_CONFIG |
- OMAP_BANDGAP_FEATURE_FREEZE_BIT |
- OMAP_BANDGAP_FEATURE_TALERT,
+const struct ti_bandgap_data omap5430_data = {
+ .features = TI_BANDGAP_FEATURE_TSHUT_CONFIG |
+ TI_BANDGAP_FEATURE_FREEZE_BIT |
+ TI_BANDGAP_FEATURE_TALERT,
.fclock_name = "l3instr_ts_gclk_div",
.div_ck_name = "l3instr_ts_gclk_div",
.conv_table = omap5430_adc_to_temp,
.adc_start_val = OMAP5430_ADC_START_VALUE,
.adc_end_val = OMAP5430_ADC_END_VALUE,
- .expose_sensor = omap_thermal_expose_sensor,
- .remove_sensor = omap_thermal_remove_sensor,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap5430_mpu_temp_sensor_registers,
.ts_data = &omap5430_mpu_temp_sensor_data,
.domain = "cpu",
- .register_cooling = omap_thermal_register_cpu_cooling,
- .unregister_cooling = omap_thermal_unregister_cpu_cooling,
+ .register_cooling = ti_thermal_register_cpu_cooling,
+ .unregister_cooling = ti_thermal_unregister_cpu_cooling,
.slope = OMAP_GRADIENT_SLOPE_5430_CPU,
.constant = OMAP_GRADIENT_CONST_5430_CPU,
.slope_pcb = OMAP_GRADIENT_SLOPE_W_PCB_5430_CPU,
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 5a8ae9c..a09ebfc 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -1,5 +1,5 @@
/*
- * OMAP4 Bandgap temperature sensor driver
+ * TI Bandgap temperature sensor driver
*
* Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
* Author: J Keerthy <j-keerthy@ti.com>
@@ -45,27 +45,27 @@
/*** Helper functions to access registers and their bitfields ***/
/**
- * omap_bandgap_readl() - simple read helper function
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_readl() - simple read helper function
+ * @bgp: pointer to ti_bandgap structure
* @reg: desired register (offset) to be read
*
* Helper function to read bandgap registers. It uses the io remapped area.
* Returns the register value.
*/
-static u32 omap_bandgap_readl(struct omap_bandgap *bgp, u32 reg)
+static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
{
return readl(bgp->base + reg);
}
/**
- * omap_bandgap_writel() - simple write helper function
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_writel() - simple write helper function
+ * @bgp: pointer to ti_bandgap structure
* @val: desired register value to be written
* @reg: desired register (offset) to be written
*
* Helper function to write bandgap registers. It uses the io remapped area.
*/
-static void omap_bandgap_writel(struct omap_bandgap *bgp, u32 val, u32 reg)
+static void ti_bandgap_writel(struct ti_bandgap *bgp, u32 val, u32 reg)
{
writel(val, bgp->base + reg);
}
@@ -82,27 +82,27 @@ do { \
u32 r; \
\
t = bgp->conf->sensors[(id)].registers; \
- r = omap_bandgap_readl(bgp, t->reg); \
+ r = ti_bandgap_readl(bgp, t->reg); \
r &= ~t->mask; \
r |= (val) << __ffs(t->mask); \
- omap_bandgap_writel(bgp, r, t->reg); \
+ ti_bandgap_writel(bgp, r, t->reg); \
} while (0)
/*** Basic helper functions ***/
/**
- * omap_bandgap_power() - controls the power state of a bandgap device
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_power() - controls the power state of a bandgap device
+ * @bgp: pointer to ti_bandgap structure
* @on: desired power state (1 - on, 0 - off)
*
* Used to power on/off a bandgap device instance. Only used on those
* that features tempsoff bit.
*/
-static int omap_bandgap_power(struct omap_bandgap *bgp, bool on)
+static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
int i;
- if (!OMAP_BANDGAP_HAS(bgp, POWER_SWITCH))
+ if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH))
goto exit;
for (i = 0; i < bgp->conf->sensor_count; i++)
@@ -114,8 +114,8 @@ exit:
}
/**
- * omap_bandgap_read_temp() - helper function to read sensor temperature
- * @bgp: pointer to omap_bandgap structure
+ * ti_bandgap_read_temp() - helper function to read sensor temperature
+ * @bgp: pointer to ti_bandgap structure
* @id: bandgap sensor id
*
* Function to concentrate the steps to read sensor temperature register.
@@ -123,7 +123,7 @@ exit:
* it might be needed to freeze the bandgap state machine, before fetching
* the register value.
*/
-static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
+static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
{
struct temp_sensor_registers *tsr;
u32 temp, reg;
@@ -131,7 +131,7 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
tsr = bgp->conf->sensors[id].registers;
reg = tsr->temp_sensor_ctrl;
- if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT)) {
+ if (TI_BANDGAP_HAS(bgp, FREEZE_BIT)) {
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 1);
/*
* In case we cannot read from cur_dtemp / dtemp_0,
@@ -141,10 +141,10 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
}
/* read temperature */
- temp = omap_bandgap_readl(bgp, reg);
+ temp = ti_bandgap_readl(bgp, reg);
temp &= tsr->bgap_dtemp_mask;
- if (OMAP_BANDGAP_HAS(bgp, FREEZE_BIT))
+ if (TI_BANDGAP_HAS(bgp, FREEZE_BIT))
RMW_BITS(bgp, id, bgap_mask_ctrl, mask_freeze_mask, 0);
return temp;
@@ -153,9 +153,9 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
/*** IRQ handlers ***/
/**
- * omap_bandgap_talert_irq_handler() - handles Temperature alert IRQs
+ * ti_bandgap_talert_irq_handler() - handles Temperature alert IRQs
* @irq: IRQ number
- * @data: private data (struct omap_bandgap *)
+ * @data: private data (struct ti_bandgap *)
*
* This is the Talert handler. Use it only if bandgap device features
* HAS(TALERT). This handler goes over all sensors and checks their
@@ -163,9 +163,9 @@ static u32 omap_bandgap_read_temp(struct omap_bandgap *bgp, int id)
* it will reset the event mask to wait for the opposite event (next event).
* Every time there is a new event, it will be reported to thermal layer.
*/
-static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
+static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
{
- struct omap_bandgap *bgp = data;
+ struct ti_bandgap *bgp = data;
struct temp_sensor_registers *tsr;
u32 t_hot = 0, t_cold = 0, ctrl;
int i;
@@ -173,7 +173,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
spin_lock(&bgp->lock);
for (i = 0; i < bgp->conf->sensor_count; i++) {
tsr = bgp->conf->sensors[i].registers;
- ctrl = omap_bandgap_readl(bgp, tsr->bgap_status);
+ ctrl = ti_bandgap_readl(bgp, tsr->bgap_status);
/* Read the status of t_hot */
t_hot = ctrl & tsr->status_hot_mask;
@@ -184,7 +184,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
if (!t_cold && !t_hot)
continue;
- ctrl = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+ ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
/*
* One TALERT interrupt: Two sources
* If the interrupt is due to t_hot then mask t_hot and
@@ -198,7 +198,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
ctrl |= tsr->mask_hot_mask;
}
- omap_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
+ ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
dev_dbg(bgp->dev,
"%s: IRQ from %s sensor: hotevent %d coldevent %d\n",
@@ -215,7 +215,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
}
/**
- * omap_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
+ * ti_bandgap_tshut_irq_handler() - handles Temperature shutdown signal
* @irq: IRQ number
* @data: private data (unused)
*
@@ -223,7 +223,7 @@ static irqreturn_t omap_bandgap_talert_irq_handler(int irq, void *data)
* HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
* the system.
*/
-static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
+static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
{
pr_emerg("%s: TSHUT temperature reached. Needs shut down...\n",
__func__);
@@ -236,8 +236,8 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
/*** Helper functions which manipulate conversion ADC <-> mi Celsius ***/
/**
- * omap_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_adc_to_mcelsius() - converts an ADC value to mCelsius scale
+ * @bgp: struct ti_bandgap pointer
* @adc_val: value in ADC representation
* @t: address where to write the resulting temperature in mCelsius
*
@@ -246,10 +246,9 @@ static irqreturn_t omap_bandgap_tshut_irq_handler(int irq, void *data)
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_adc_to_mcelsius(struct omap_bandgap *bgp,
- int adc_val, int *t)
+int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
- struct omap_bandgap_data *conf = bgp->conf;
+ struct ti_bandgap_data *conf = bgp->conf;
int ret = 0;
/* look up for temperature in the table and return the temperature */
@@ -265,8 +264,8 @@ exit:
}
/**
- * omap_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
+ * @bgp: struct ti_bandgap pointer
* @temp: value in mCelsius
* @adc: address where to write the resulting temperature in ADC representation
*
@@ -275,10 +274,9 @@ exit:
* The conversion table is indexed by the ADC values.
*/
static
-int omap_bandgap_mcelsius_to_adc(struct omap_bandgap *bgp, long temp,
- int *adc)
+int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
- struct omap_bandgap_data *conf = bgp->conf;
+ struct ti_bandgap_data *conf = bgp->conf;
const int *conv_table = bgp->conf->conv_table;
int high, low, mid, ret = 0;
@@ -306,8 +304,8 @@ exit:
}
/**
- * omap_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
+ * @bgp: struct ti_bandgap pointer
* @adc_val: temperature value in ADC representation
* @hyst_val: hysteresis value in mCelsius
* @sum: address where to write the resulting temperature (in ADC scale)
@@ -316,8 +314,8 @@ exit:
* Returns 0 on success, -ERANGE otherwise.
*/
static
-int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val,
- int hyst_val, u32 *sum)
+int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
+ u32 *sum)
{
int temp, ret;
@@ -325,13 +323,13 @@ int omap_bandgap_add_hyst(struct omap_bandgap *bgp, int adc_val,
* Need to add in the mcelsius domain, so we have a temperature
* the conv_table range
*/
- ret = omap_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
if (ret < 0)
goto exit;
temp += hyst_val;
- ret = omap_bandgap_mcelsius_to_adc(bgp, temp, sum);
+ ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
exit:
return ret;
@@ -340,25 +338,25 @@ exit:
/*** Helper functions handling device Alert/Shutdown signals ***/
/**
- * omap_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
+ * @bgp: struct ti_bandgap pointer
* @t_hot: hot temperature value to trigger alert signal
* @t_cold: cold temperature value to trigger alert signal
*
* Checks the requested t_hot and t_cold values and configures the IRQ event
* masks accordingly. Call this function only if bandgap features HAS(TALERT).
*/
-static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
- u32 t_hot, u32 t_cold)
+static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
+ u32 t_hot, u32 t_cold)
{
struct temp_sensor_registers *tsr;
u32 temp, reg_val;
/* Read the current on die temperature */
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
tsr = bgp->conf->sensors[id].registers;
- reg_val = omap_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
+ reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
if (temp < t_hot)
reg_val |= tsr->mask_hot_mask;
@@ -369,12 +367,12 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
reg_val |= tsr->mask_cold_mask;
else
reg_val &= ~tsr->mask_cold_mask;
- omap_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
+ ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
}
/**
- * omap_bandgap_update_alert_threshold() - sequence to update thresholds
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_update_alert_threshold() - sequence to update thresholds
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
* @val: value (ADC) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -386,9 +384,8 @@ static void omap_bandgap_unmask_interrupts(struct omap_bandgap *bgp, int id,
* and configures the thresholds so that t_hot is always greater than t_cold.
* Call this function only if bandgap features HAS(TALERT).
*/
-static
-int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
- int val, bool hot)
+static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
+ int val, bool hot)
{
struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
struct temp_sensor_registers *tsr;
@@ -398,7 +395,7 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
tsr = bgp->conf->sensors[id].registers;
/* obtain the current value */
- thresh_val = omap_bandgap_readl(bgp, tsr->bgap_threshold);
+ thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold);
t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
__ffs(tsr->threshold_tcold_mask);
t_hot = (thresh_val & tsr->threshold_thot_mask) >>
@@ -410,13 +407,13 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
if (t_cold < t_hot) {
if (hot)
- err = omap_bandgap_add_hyst(bgp, t_hot,
- -ts_data->hyst_val,
- &t_cold);
+ err = ti_bandgap_add_hyst(bgp, t_hot,
+ -ts_data->hyst_val,
+ &t_cold);
else
- err = omap_bandgap_add_hyst(bgp, t_cold,
- ts_data->hyst_val,
- &t_hot);
+ err = ti_bandgap_add_hyst(bgp, t_cold,
+ ts_data->hyst_val,
+ &t_hot);
}
/* write the new threshold values */
@@ -424,7 +421,7 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask));
reg_val |= thresh_val & ~tsr->threshold_tcold_mask;
reg_val |= (t_cold << __ffs(tsr->threshold_tcold_mask));
- omap_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
+ ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
if (err) {
dev_err(bgp->dev, "failed to reprogram thot threshold\n");
@@ -432,20 +429,20 @@ int omap_bandgap_update_alert_threshold(struct omap_bandgap *bgp, int id,
goto exit;
}
- omap_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
+ ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
exit:
return err;
}
/**
- * omap_bandgap_validate() - helper to check the sanity of a struct omap_bandgap
- * @bgp: struct omap_bandgap pointer
+ * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
*
* Checks if the bandgap pointer is valid and if the sensor id is also
* applicable.
*/
-static inline int omap_bandgap_validate(struct omap_bandgap *bgp, int id)
+static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
int ret = 0;
@@ -466,8 +463,8 @@ exit:
}
/**
- * _omap_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
- * @bgp: struct omap_bandgap pointer
+ * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a new threshold
* @hot: desired threshold to be updated. true if threshold hot, false if
@@ -478,19 +475,19 @@ exit:
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val,
- bool hot)
+int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
+ bool hot)
{
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *tsr;
u32 adc_val;
int ret;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ if (!TI_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
@@ -508,12 +505,12 @@ int _omap_bandgap_write_threshold(struct omap_bandgap *bgp, int id, int val,
if (ret)
goto exit;
- ret = omap_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
+ ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
if (ret < 0)
goto exit;
spin_lock(&bgp->lock);
- omap_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
+ ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
spin_unlock(&bgp->lock);
exit:
@@ -521,8 +518,8 @@ exit:
}
/**
- * _omap_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
- * @bgp: struct omap_bandgap pointer
+ * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
+ * @bgp: struct ti_bandgap pointer
* @id: bandgap sensor id
* @val: value (mCelsius) of a threshold
* @hot: desired threshold to be read. true if threshold hot, false if
@@ -532,18 +529,18 @@ exit:
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id,
- int *val, bool hot)
+int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
+ int *val, bool hot)
{
struct temp_sensor_registers *tsr;
u32 temp, mask;
int ret = 0;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
goto exit;
- if (!OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ if (!TI_BANDGAP_HAS(bgp, TALERT)) {
ret = -ENOTSUPP;
goto exit;
}
@@ -554,9 +551,9 @@ int _omap_bandgap_read_threshold(struct omap_bandgap *bgp, int id,
else
mask = tsr->threshold_tcold_mask;
- temp = omap_bandgap_readl(bgp, tsr->bgap_threshold);
+ temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
temp = (temp & mask) >> __ffs(mask);
- ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret) {
dev_err(bgp->dev, "failed to read thot\n");
ret = -EIO;
@@ -572,83 +569,81 @@ exit:
/*** Exposed APIs ***/
/**
- * omap_bandgap_read_thot() - reads sensor current thot
+ * ti_bandgap_read_thot() - reads sensor current thot
* @bgp - pointer to bandgap instance
* @id - sensor id
* @thot - resulting current thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id,
- int *thot)
+int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
{
- return _omap_bandgap_read_threshold(bgp, id, thot, true);
+ return _ti_bandgap_read_threshold(bgp, id, thot, true);
}
/**
- * omap_bandgap_write_thot() - sets sensor current thot
+ * ti_bandgap_write_thot() - sets sensor current thot
* @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired thot value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val)
+int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bgp, id, val, true);
+ return _ti_bandgap_write_threshold(bgp, id, val, true);
}
/**
- * omap_bandgap_read_tcold() - reads sensor current tcold
+ * ti_bandgap_read_tcold() - reads sensor current tcold
* @bgp - pointer to bandgap instance
* @id - sensor id
* @tcold - resulting current tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id,
- int *tcold)
+int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
{
- return _omap_bandgap_read_threshold(bgp, id, tcold, false);
+ return _ti_bandgap_read_threshold(bgp, id, tcold, false);
}
/**
- * omap_bandgap_write_tcold() - sets the sensor tcold
+ * ti_bandgap_write_tcold() - sets the sensor tcold
* @bgp - pointer to bandgap instance
* @id - sensor id
* @val - desired tcold value
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val)
+int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
{
- return _omap_bandgap_write_threshold(bgp, id, val, false);
+ return _ti_bandgap_write_threshold(bgp, id, val, false);
}
/**
- * omap_bandgap_read_update_interval() - read the sensor update interval
+ * ti_bandgap_read_update_interval() - read the sensor update interval
* @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - resulting update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
- int *interval)
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+ int *interval)
{
struct temp_sensor_registers *tsr;
u32 time;
int ret;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (!TI_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
tsr = bgp->conf->sensors[id].registers;
- time = omap_bandgap_readl(bgp, tsr->bgap_counter);
+ time = ti_bandgap_readl(bgp, tsr->bgap_counter);
time = (time & tsr->counter_mask) >> __ffs(tsr->counter_mask);
time = time * 1000 / bgp->clk_rate;
@@ -658,21 +653,21 @@ int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
}
/**
- * omap_bandgap_write_update_interval() - set the update interval
+ * ti_bandgap_write_update_interval() - set the update interval
* @bgp - pointer to bandgap instance
* @id - sensor id
* @interval - desired update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_write_update_interval(struct omap_bandgap *bgp,
- int id, u32 interval)
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
+ int id, u32 interval)
{
- int ret = omap_bandgap_validate(bgp, id);
+ int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
- if (!OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (!TI_BANDGAP_HAS(bgp, COUNTER))
return -ENOTSUPP;
interval = interval * bgp->clk_rate / 1000;
@@ -684,28 +679,28 @@ int omap_bandgap_write_update_interval(struct omap_bandgap *bgp,
}
/**
- * omap_bandgap_read_temperature() - report current temperature
+ * ti_bandgap_read_temperature() - report current temperature
* @bgp - pointer to bandgap instance
* @id - sensor id
* @temperature - resulting temperature
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
- int *temperature)
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
+ int *temperature)
{
u32 temp;
int ret;
- ret = omap_bandgap_validate(bgp, id);
+ ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
spin_lock(&bgp->lock);
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
spin_unlock(&bgp->lock);
- ret |= omap_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
@@ -715,7 +710,7 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
}
/**
- * omap_bandgap_set_sensor_data() - helper function to store thermal
+ * ti_bandgap_set_sensor_data() - helper function to store thermal
* framework related data.
* @bgp - pointer to bandgap instance
* @id - sensor id
@@ -723,10 +718,9 @@ int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
*
* returns 0 on success or the proper error code
*/
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
- void *data)
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
{
- int ret = omap_bandgap_validate(bgp, id);
+ int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ret;
@@ -736,16 +730,16 @@ int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
}
/**
- * omap_bandgap_get_sensor_data() - helper function to get thermal
+ * ti_bandgap_get_sensor_data() - helper function to get thermal
* framework related data.
* @bgp - pointer to bandgap instance
* @id - sensor id
*
* returns data stored by set function with sensor id on success or NULL
*/
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id)
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
{
- int ret = omap_bandgap_validate(bgp, id);
+ int ret = ti_bandgap_validate(bgp, id);
if (ret)
return ERR_PTR(ret);
@@ -755,29 +749,29 @@ void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id)
/*** Helper functions used during device initialization ***/
/**
- * omap_bandgap_force_single_read() - executes 1 single ADC conversion
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_force_single_read() - executes 1 single ADC conversion
+ * @bgp: pointer to struct ti_bandgap
* @id: sensor id which it is desired to read 1 temperature
*
* Used to initialize the conversion state machine and set it to a valid
* state. Called during device initialization and context restore events.
*/
static int
-omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id)
+ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
{
u32 temp = 0, counter = 1000;
/* Select single conversion mode */
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
RMW_BITS(bgp, id, bgap_mode_ctrl, mode_ctrl_mask, 0);
/* Start of Conversion = 1 */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
/* Wait until DTEMP is updated */
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
while ((temp == 0) && --counter)
- temp = omap_bandgap_read_temp(bgp, id);
+ temp = ti_bandgap_read_temp(bgp, id);
/* REVISIT: Check correct condition for end of conversion */
/* Start of Conversion = 0 */
@@ -787,21 +781,21 @@ omap_bandgap_force_single_read(struct omap_bandgap *bgp, int id)
}
/**
- * omap_bandgap_set_continous_mode() - One time enabling of continuous mode
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_set_continous_mode() - One time enabling of continuous mode
+ * @bgp: pointer to struct ti_bandgap
*
* Call this function only if HAS(MODE_CONFIG) is set. As this driver may
* be used for junction temperature monitoring, it is desirable that the
* sensors are operational all the time, so that alerts are generated
* properly.
*/
-static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
+static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
{
int i;
for (i = 0; i < bgp->conf->sensor_count; i++) {
/* Perform a single read just before enabling continuous */
- omap_bandgap_force_single_read(bgp, i);
+ ti_bandgap_force_single_read(bgp, i);
RMW_BITS(bgp, i, bgap_mode_ctrl, mode_ctrl_mask, 1);
}
@@ -809,8 +803,8 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
}
/**
- * omap_bandgap_tshut_init() - setup and initialize tshut handling
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_tshut_init() - setup and initialize tshut handling
+ * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TSHUT).
@@ -820,8 +814,8 @@ static int omap_bandgap_set_continuous_mode(struct omap_bandgap *bgp)
* one of the bandgap sensors violates the TSHUT high/hot threshold.
* And in that case, the system must go off.
*/
-static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
- struct platform_device *pdev)
+static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
+ struct platform_device *pdev)
{
int gpio_nr = bgp->tshut_gpio;
int status;
@@ -838,10 +832,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
return status;
}
- status = request_irq(gpio_to_irq(gpio_nr),
- omap_bandgap_tshut_irq_handler,
- IRQF_TRIGGER_RISING, "tshut",
- NULL);
+ status = request_irq(gpio_to_irq(gpio_nr), ti_bandgap_tshut_irq_handler,
+ IRQF_TRIGGER_RISING, "tshut", NULL);
if (status) {
gpio_free(gpio_nr);
dev_err(bgp->dev, "request irq failed for TSHUT");
@@ -851,8 +843,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
}
/**
- * omap_bandgap_alert_init() - setup and initialize talert handling
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_alert_init() - setup and initialize talert handling
+ * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Call this function only in case the bandgap features HAS(TALERT).
@@ -861,8 +853,8 @@ static int omap_bandgap_tshut_init(struct omap_bandgap *bgp,
* are violated. In these situation, the driver must reprogram the thresholds,
* accordingly to specified policy.
*/
-static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
- struct platform_device *pdev)
+static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
+ struct platform_device *pdev)
{
int ret;
@@ -872,7 +864,7 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
return bgp->irq;
}
ret = request_threaded_irq(bgp->irq, NULL,
- omap_bandgap_talert_irq_handler,
+ ti_bandgap_talert_irq_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"talert", bgp);
if (ret) {
@@ -884,20 +876,20 @@ static int omap_bandgap_talert_init(struct omap_bandgap *bgp,
}
/**
- * omap_bandgap_build() - parse DT and setup a struct omap_bandgap
- * @bgp: pointer to struct omap_bandgap
+ * ti_bandgap_build() - parse DT and setup a struct ti_bandgap
+ * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Used to read the device tree properties accordingly to the bandgap
* matching version. Based on bandgap version and its capabilities it
- * will build a struct omap_bandgap out of the required DT entries.
+ * will build a struct ti_bandgap out of the required DT entries.
*/
-static const struct of_device_id of_omap_bandgap_match[];
-static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
+static const struct of_device_id of_ti_bandgap_match[];
+static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *of_id;
- struct omap_bandgap *bgp;
+ struct ti_bandgap *bgp;
struct resource *res;
u32 prop;
int i;
@@ -908,14 +900,14 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
return ERR_PTR(-EINVAL);
}
- bgp = devm_kzalloc(&pdev->dev, sizeof(struct omap_bandgap),
+ bgp = devm_kzalloc(&pdev->dev, sizeof(struct ti_bandgap),
GFP_KERNEL);
if (!bgp) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
}
- of_id = of_match_device(of_omap_bandgap_match, &pdev->dev);
+ of_id = of_match_device(of_ti_bandgap_match, &pdev->dev);
if (of_id)
bgp->conf = of_id->data;
@@ -935,7 +927,7 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
i++;
} while (res);
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
if (of_property_read_u32(node, "ti,tshut-gpio", &prop) < 0) {
dev_err(&pdev->dev, "missing tshut gpio in device tree\n");
return ERR_PTR(-EINVAL);
@@ -954,20 +946,20 @@ static struct omap_bandgap *omap_bandgap_build(struct platform_device *pdev)
/*** Device driver call backs ***/
static
-int omap_bandgap_probe(struct platform_device *pdev)
+int ti_bandgap_probe(struct platform_device *pdev)
{
- struct omap_bandgap *bgp;
+ struct ti_bandgap *bgp;
int clk_rate, ret = 0, i;
- bgp = omap_bandgap_build(pdev);
+ bgp = ti_bandgap_build(pdev);
if (IS_ERR_OR_NULL(bgp)) {
dev_err(&pdev->dev, "failed to fetch platform data\n");
return PTR_ERR(bgp);
}
bgp->dev = &pdev->dev;
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
- ret = omap_bandgap_tshut_init(bgp, pdev);
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
+ ret = ti_bandgap_tshut_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev,
"failed to initialize system tshut IRQ\n");
@@ -1000,7 +992,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
* it is an untrimmed sample and the temperatures
* may not be accurate
*/
- val = omap_bandgap_readl(bgp, tsr->bgap_efuse);
+ val = ti_bandgap_readl(bgp, tsr->bgap_efuse);
if (ret || !val)
dev_info(&pdev->dev,
"Non-trimmed BGAP, Temp not accurate\n");
@@ -1020,7 +1012,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Cannot re-set clock rate. Continuing\n");
bgp->clk_rate = clk_rate;
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_prepare_enable(bgp->fclock);
@@ -1028,10 +1020,10 @@ int omap_bandgap_probe(struct platform_device *pdev)
bgp->dev = &pdev->dev;
platform_set_drvdata(pdev, bgp);
- omap_bandgap_power(bgp, true);
+ ti_bandgap_power(bgp, true);
/* Set default counter to 1 for now */
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
for (i = 0; i < bgp->conf->sensor_count; i++)
RMW_BITS(bgp, i, bgap_counter, counter_mask, 1);
@@ -1041,7 +1033,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
ts_data = bgp->conf->sensors[i].ts_data;
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
/* Set initial Talert thresholds */
RMW_BITS(bgp, i, bgap_threshold,
threshold_tcold_mask, ts_data->t_cold);
@@ -1052,7 +1044,7 @@ int omap_bandgap_probe(struct platform_device *pdev)
RMW_BITS(bgp, i, bgap_mask_ctrl, mask_cold_mask, 1);
}
- if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG)) {
/* Set initial Tshut thresholds */
RMW_BITS(bgp, i, tshut_threshold,
tshut_hot_mask, ts_data->tshut_hot);
@@ -1061,11 +1053,11 @@ int omap_bandgap_probe(struct platform_device *pdev)
}
}
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
- omap_bandgap_set_continuous_mode(bgp);
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+ ti_bandgap_set_continuous_mode(bgp);
/* Set .250 seconds time as default counter */
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
for (i = 0; i < bgp->conf->sensor_count; i++)
RMW_BITS(bgp, i, bgap_counter, counter_mask,
bgp->clk_rate / 4);
@@ -1087,8 +1079,8 @@ int omap_bandgap_probe(struct platform_device *pdev)
* might be called as soon as it is enabled where as rest of framework
* is still getting initialised.
*/
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
- ret = omap_bandgap_talert_init(bgp, pdev);
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
+ ret = ti_bandgap_talert_init(bgp, pdev);
if (ret) {
dev_err(&pdev->dev, "failed to initialize Talert IRQ\n");
i = bgp->conf->sensor_count;
@@ -1099,13 +1091,13 @@ int omap_bandgap_probe(struct platform_device *pdev)
return 0;
disable_clk:
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
put_clks:
clk_put(bgp->fclock);
clk_put(bgp->div_clk);
free_irqs:
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
gpio_free(bgp->tshut_gpio);
}
@@ -1114,9 +1106,9 @@ free_irqs:
}
static
-int omap_bandgap_remove(struct platform_device *pdev)
+int ti_bandgap_remove(struct platform_device *pdev)
{
- struct omap_bandgap *bgp = platform_get_drvdata(pdev);
+ struct ti_bandgap *bgp = platform_get_drvdata(pdev);
int i;
/* First thing is to remove sensor interfaces */
@@ -1128,17 +1120,17 @@ int omap_bandgap_remove(struct platform_device *pdev)
bgp->conf->remove_sensor(bgp, i);
}
- omap_bandgap_power(bgp, false);
+ ti_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
clk_put(bgp->fclock);
clk_put(bgp->div_clk);
- if (OMAP_BANDGAP_HAS(bgp, TALERT))
+ if (TI_BANDGAP_HAS(bgp, TALERT))
free_irq(bgp->irq, bgp);
- if (OMAP_BANDGAP_HAS(bgp, TSHUT)) {
+ if (TI_BANDGAP_HAS(bgp, TSHUT)) {
free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
gpio_free(bgp->tshut_gpio);
}
@@ -1147,7 +1139,7 @@ int omap_bandgap_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp)
+static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
{
int i;
@@ -1158,28 +1150,28 @@ static int omap_bandgap_save_ctxt(struct omap_bandgap *bgp)
rval = &bgp->conf->sensors[i].regval;
tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
- rval->bg_mode_ctrl = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+ rval->bg_mode_ctrl = ti_bandgap_readl(bgp,
tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
- rval->bg_counter = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
+ rval->bg_counter = ti_bandgap_readl(bgp,
tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
- rval->bg_threshold = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
+ rval->bg_threshold = ti_bandgap_readl(bgp,
tsr->bgap_threshold);
- rval->bg_ctrl = omap_bandgap_readl(bgp,
+ rval->bg_ctrl = ti_bandgap_readl(bgp,
tsr->bgap_mask_ctrl);
}
- if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
- rval->tshut_threshold = omap_bandgap_readl(bgp,
+ if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ rval->tshut_threshold = ti_bandgap_readl(bgp,
tsr->tshut_threshold);
}
return 0;
}
-static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp)
+static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
{
int i;
@@ -1191,70 +1183,70 @@ static int omap_bandgap_restore_ctxt(struct omap_bandgap *bgp)
rval = &bgp->conf->sensors[i].regval;
tsr = bgp->conf->sensors[i].registers;
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
- val = omap_bandgap_readl(bgp, tsr->bgap_counter);
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
+ val = ti_bandgap_readl(bgp, tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bgp, TSHUT_CONFIG))
- omap_bandgap_writel(bgp, rval->tshut_threshold,
- tsr->tshut_threshold);
+ if (TI_BANDGAP_HAS(bgp, TSHUT_CONFIG))
+ ti_bandgap_writel(bgp, rval->tshut_threshold,
+ tsr->tshut_threshold);
/* Force immediate temperature measurement and update
* of the DTEMP field
*/
- omap_bandgap_force_single_read(bgp, i);
-
- if (OMAP_BANDGAP_HAS(bgp, COUNTER))
- omap_bandgap_writel(bgp, rval->bg_counter,
- tsr->bgap_counter);
- if (OMAP_BANDGAP_HAS(bgp, MODE_CONFIG))
- omap_bandgap_writel(bgp, rval->bg_mode_ctrl,
- tsr->bgap_mode_ctrl);
- if (OMAP_BANDGAP_HAS(bgp, TALERT)) {
- omap_bandgap_writel(bgp, rval->bg_threshold,
- tsr->bgap_threshold);
- omap_bandgap_writel(bgp, rval->bg_ctrl,
- tsr->bgap_mask_ctrl);
+ ti_bandgap_force_single_read(bgp, i);
+
+ if (TI_BANDGAP_HAS(bgp, COUNTER))
+ ti_bandgap_writel(bgp, rval->bg_counter,
+ tsr->bgap_counter);
+ if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
+ ti_bandgap_writel(bgp, rval->bg_mode_ctrl,
+ tsr->bgap_mode_ctrl);
+ if (TI_BANDGAP_HAS(bgp, TALERT)) {
+ ti_bandgap_writel(bgp, rval->bg_threshold,
+ tsr->bgap_threshold);
+ ti_bandgap_writel(bgp, rval->bg_ctrl,
+ tsr->bgap_mask_ctrl);
}
}
return 0;
}
-static int omap_bandgap_suspend(struct device *dev)
+static int ti_bandgap_suspend(struct device *dev)
{
- struct omap_bandgap *bgp = dev_get_drvdata(dev);
+ struct ti_bandgap *bgp = dev_get_drvdata(dev);
int err;
- err = omap_bandgap_save_ctxt(bgp);
- omap_bandgap_power(bgp, false);
+ err = ti_bandgap_save_ctxt(bgp);
+ ti_bandgap_power(bgp, false);
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_disable_unprepare(bgp->fclock);
return err;
}
-static int omap_bandgap_resume(struct device *dev)
+static int ti_bandgap_resume(struct device *dev)
{
- struct omap_bandgap *bgp = dev_get_drvdata(dev);
+ struct ti_bandgap *bgp = dev_get_drvdata(dev);
- if (OMAP_BANDGAP_HAS(bgp, CLK_CTRL))
+ if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
clk_prepare_enable(bgp->fclock);
- omap_bandgap_power(bgp, true);
+ ti_bandgap_power(bgp, true);
- return omap_bandgap_restore_ctxt(bgp);
+ return ti_bandgap_restore_ctxt(bgp);
}
-static const struct dev_pm_ops omap_bandgap_dev_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(omap_bandgap_suspend,
- omap_bandgap_resume)
+static const struct dev_pm_ops ti_bandgap_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(ti_bandgap_suspend,
+ ti_bandgap_resume)
};
-#define DEV_PM_OPS (&omap_bandgap_dev_pm_ops)
+#define DEV_PM_OPS (&ti_bandgap_dev_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif
-static const struct of_device_id of_omap_bandgap_match[] = {
+static const struct of_device_id of_ti_bandgap_match[] = {
#ifdef CONFIG_OMAP4_THERMAL
{
.compatible = "ti,omap4430-bandgap",
@@ -1278,21 +1270,21 @@ static const struct of_device_id of_omap_bandgap_match[] = {
/* Sentinel */
{ },
};
-MODULE_DEVICE_TABLE(of, of_omap_bandgap_match);
+MODULE_DEVICE_TABLE(of, of_ti_bandgap_match);
-static struct platform_driver omap_bandgap_sensor_driver = {
- .probe = omap_bandgap_probe,
- .remove = omap_bandgap_remove,
+static struct platform_driver ti_bandgap_sensor_driver = {
+ .probe = ti_bandgap_probe,
+ .remove = ti_bandgap_remove,
.driver = {
- .name = "omap-bandgap",
+ .name = "ti-soc-thermal",
.pm = DEV_PM_OPS,
- .of_match_table = of_omap_bandgap_match,
+ .of_match_table = of_ti_bandgap_match,
},
};
-module_platform_driver(omap_bandgap_sensor_driver);
+module_platform_driver(ti_bandgap_sensor_driver);
MODULE_DESCRIPTION("OMAP4+ bandgap temperature sensor driver");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:omap-bandgap");
+MODULE_ALIAS("platform:ti-soc-thermal");
MODULE_AUTHOR("Texas Instrument Inc.");
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
index ad83be8..72c760f 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
@@ -20,8 +20,8 @@
* 02110-1301 USA
*
*/
-#ifndef __OMAP_BANDGAP_H
-#define __OMAP_BANDGAP_H
+#ifndef __TI_BANDGAP_H
+#define __TI_BANDGAP_H
#include <linux/spinlock.h>
#include <linux/types.h>
@@ -30,22 +30,22 @@
/**
* DOC: bandgap driver data structure
* ==================================
- * +---------------------+ +-----------------+
- * | struct omap_bandgap |-->| struct device * |
- * +----------+----------+ +-----------------+
+ * +-------------------+ +-----------------+
+ * | struct ti_bandgap |-->| struct device * |
+ * +----------+--------+ +-----------------+
* |
* |
* V
- * +--------------------------+
- * | struct omap_bandgap_data |
- * +--------------------------+
+ * +------------------------+
+ * | struct ti_bandgap_data |
+ * +------------------------+
* |
* |
* * (Array of)
* +------------+------------------------------------------------------+
- * | +----------+--------------+ +-------------------------+ |
- * | | struct omap_temp_sensor |-->| struct temp_sensor_data | |
- * | +-------------------------+ +------------+------------+ |
+ * | +----------+------------+ +-------------------------+ |
+ * | | struct ti_temp_sensor |-->| struct temp_sensor_data | |
+ * | +-----------------------+ +------------+------------+ |
* | | |
* | +--------------------------+ |
* | V V |
@@ -56,7 +56,7 @@
* +-------------------------------------------------------------------+
*
* Above is a simple diagram describing how the data structure below
- * are organized. For each bandgap device there should be a omap_bandgap_data
+ * are organized. For each bandgap device there should be a ti_bandgap_data
* containing the device instance configuration, as well as, an array of
* sensors, representing every sensor instance present in this bandgap.
*/
@@ -187,16 +187,16 @@ struct temp_sensor_data {
u32 update_int2; /* not used */
};
-struct omap_bandgap_data;
+struct ti_bandgap_data;
/**
- * struct omap_bandgap - bandgap device structure
+ * struct ti_bandgap - bandgap device structure
* @dev: struct device pointer
* @base: io memory base address
* @conf: struct with bandgap configuration set (# sensors, conv_table, etc)
* @fclock: pointer to functional clock of temperature sensor
* @div_clk: pointer to divider clock of temperature sensor fclk
- * @bg_mutex: mutex for omap_bandgap structure
+ * @bg_mutex: mutex for ti_bandgap structure
* @irq: MPU IRQ number for thermal alert
* @tshut_gpio: GPIO where Tshut signal is routed
* @clk_rate: Holds current clock rate
@@ -205,10 +205,10 @@ struct omap_bandgap_data;
* It holds most of the dynamic stuff. Configurations and sensor specific
* entries are inside the @conf structure.
*/
-struct omap_bandgap {
+struct ti_bandgap {
struct device *dev;
void __iomem *base;
- struct omap_bandgap_data *conf;
+ struct ti_bandgap_data *conf;
struct clk *fclock;
struct clk *div_clk;
spinlock_t lock; /* shields this struct */
@@ -237,7 +237,7 @@ struct temp_sensor_regval {
};
/**
- * struct omap_temp_sensor - bandgap temperature sensor configuration data
+ * struct ti_temp_sensor - bandgap temperature sensor configuration data
* @ts_data: pointer to struct with thresholds, limits of temperature sensor
* @registers: pointer to the list of register offsets and bitfields
* @regval: temperature sensor register values
@@ -258,7 +258,7 @@ struct temp_sensor_regval {
* assess the gradient from hotspot, how to cooldown the domain when sensor
* reports too hot temperature.
*/
-struct omap_temp_sensor {
+struct ti_temp_sensor {
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *registers;
struct temp_sensor_regval regval;
@@ -269,56 +269,56 @@ struct omap_temp_sensor {
const int slope_pcb;
const int constant_pcb;
void *data;
- int (*register_cooling)(struct omap_bandgap *bgp, int id);
- int (*unregister_cooling)(struct omap_bandgap *bgp, int id);
+ int (*register_cooling)(struct ti_bandgap *bgp, int id);
+ int (*unregister_cooling)(struct ti_bandgap *bgp, int id);
};
/**
* DOC: omap bandgap feature types
*
- * OMAP_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
+ * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
* of a bandgap device instance is routed to the processor. This means
* the system must react and perform the shutdown by itself (handle an
* IRQ, for instance).
*
- * OMAP_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control
+ * TI_BANDGAP_FEATURE_TSHUT_CONFIG - used when the bandgap device has control
* over the thermal shutdown configuration. This means that the thermal
* shutdown thresholds are programmable, for instance.
*
- * OMAP_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs
+ * TI_BANDGAP_FEATURE_TALERT - used when the bandgap device instance outputs
* a signal representing violation of programmable alert thresholds.
*
- * OMAP_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which
+ * TI_BANDGAP_FEATURE_MODE_CONFIG - used when it is possible to choose which
* mode, continuous or one shot, the bandgap device instance will operate.
*
- * OMAP_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows
+ * TI_BANDGAP_FEATURE_COUNTER - used when the bandgap device instance allows
* programming the update interval of its internal state machine.
*
- * OMAP_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows
+ * TI_BANDGAP_FEATURE_POWER_SWITCH - used when the bandgap device allows
* itself to be switched on/off.
*
- * OMAP_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap
+ * TI_BANDGAP_FEATURE_CLK_CTRL - used when the clocks feeding the bandgap
* device are gateable or not.
*
- * OMAP_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features
+ * TI_BANDGAP_FEATURE_FREEZE_BIT - used when the bandgap device features
* a history buffer that its update can be freezed/unfreezed.
*
- * OMAP_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
+ * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
* specific feature (above) or not. Return non-zero, if yes.
*/
-#define OMAP_BANDGAP_FEATURE_TSHUT BIT(0)
-#define OMAP_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1)
-#define OMAP_BANDGAP_FEATURE_TALERT BIT(2)
-#define OMAP_BANDGAP_FEATURE_MODE_CONFIG BIT(3)
-#define OMAP_BANDGAP_FEATURE_COUNTER BIT(4)
-#define OMAP_BANDGAP_FEATURE_POWER_SWITCH BIT(5)
-#define OMAP_BANDGAP_FEATURE_CLK_CTRL BIT(6)
-#define OMAP_BANDGAP_FEATURE_FREEZE_BIT BIT(7)
-#define OMAP_BANDGAP_HAS(b, f) \
- ((b)->conf->features & OMAP_BANDGAP_FEATURE_ ## f)
+#define TI_BANDGAP_FEATURE_TSHUT BIT(0)
+#define TI_BANDGAP_FEATURE_TSHUT_CONFIG BIT(1)
+#define TI_BANDGAP_FEATURE_TALERT BIT(2)
+#define TI_BANDGAP_FEATURE_MODE_CONFIG BIT(3)
+#define TI_BANDGAP_FEATURE_COUNTER BIT(4)
+#define TI_BANDGAP_FEATURE_POWER_SWITCH BIT(5)
+#define TI_BANDGAP_FEATURE_CLK_CTRL BIT(6)
+#define TI_BANDGAP_FEATURE_FREEZE_BIT BIT(7)
+#define TI_BANDGAP_HAS(b, f) \
+ ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
/**
- * struct omap_bandgap_data - omap bandgap data configuration structure
+ * struct ti_bandgap_data - omap bandgap data configuration structure
* @features: a bitwise flag set to describe the device features
* @conv_table: Pointer to ADC to temperature conversion table
* @adc_start_val: ADC conversion table starting value
@@ -337,7 +337,7 @@ struct omap_temp_sensor {
* their configuration representation, and how to export and unexport them to
* a thermal API.
*/
-struct omap_bandgap_data {
+struct ti_bandgap_data {
unsigned int features;
const int *conv_table;
u32 adc_start_val;
@@ -345,32 +345,31 @@ struct omap_bandgap_data {
char *fclock_name;
char *div_ck_name;
int sensor_count;
- int (*report_temperature)(struct omap_bandgap *bgp, int id);
- int (*expose_sensor)(struct omap_bandgap *bgp, int id, char *domain);
- int (*remove_sensor)(struct omap_bandgap *bgp, int id);
+ int (*report_temperature)(struct ti_bandgap *bgp, int id);
+ int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain);
+ int (*remove_sensor)(struct ti_bandgap *bgp, int id);
/* this needs to be at the end */
- struct omap_temp_sensor sensors[];
+ struct ti_temp_sensor sensors[];
};
-int omap_bandgap_read_thot(struct omap_bandgap *bgp, int id, int *thot);
-int omap_bandgap_write_thot(struct omap_bandgap *bgp, int id, int val);
-int omap_bandgap_read_tcold(struct omap_bandgap *bgp, int id, int *tcold);
-int omap_bandgap_write_tcold(struct omap_bandgap *bgp, int id, int val);
-int omap_bandgap_read_update_interval(struct omap_bandgap *bgp, int id,
- int *interval);
-int omap_bandgap_write_update_interval(struct omap_bandgap *bgp, int id,
- u32 interval);
-int omap_bandgap_read_temperature(struct omap_bandgap *bgp, int id,
+int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot);
+int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold);
+int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val);
+int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
+ int *interval);
+int ti_bandgap_write_update_interval(struct ti_bandgap *bgp, int id,
+ u32 interval);
+int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
int *temperature);
-int omap_bandgap_set_sensor_data(struct omap_bandgap *bgp, int id,
- void *data);
-void *omap_bandgap_get_sensor_data(struct omap_bandgap *bgp, int id);
+int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
+void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
#ifdef CONFIG_OMAP4_THERMAL
-extern const struct omap_bandgap_data omap4430_data;
-extern const struct omap_bandgap_data omap4460_data;
-extern const struct omap_bandgap_data omap4470_data;
+extern const struct ti_bandgap_data omap4430_data;
+extern const struct ti_bandgap_data omap4460_data;
+extern const struct ti_bandgap_data omap4470_data;
#else
#define omap4430_data NULL
#define omap4460_data NULL
@@ -378,7 +377,7 @@ extern const struct omap_bandgap_data omap4470_data;
#endif
#ifdef CONFIG_OMAP5_THERMAL
-extern const struct omap_bandgap_data omap5430_data;
+extern const struct ti_bandgap_data omap5430_data;
#else
#define omap5430_data NULL
#endif
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
index feab2f4..fb50e7e 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
@@ -36,33 +36,33 @@
#include "ti-bandgap.h"
/* common data structures */
-struct omap_thermal_data {
- struct thermal_zone_device *omap_thermal;
+struct ti_thermal_data {
+ struct thermal_zone_device *ti_thermal;
struct thermal_cooling_device *cool_dev;
- struct omap_bandgap *bgp;
+ struct ti_bandgap *bgp;
enum thermal_device_mode mode;
struct work_struct thermal_wq;
int sensor_id;
};
-static void omap_thermal_work(struct work_struct *work)
+static void ti_thermal_work(struct work_struct *work)
{
- struct omap_thermal_data *data = container_of(work,
- struct omap_thermal_data, thermal_wq);
+ struct ti_thermal_data *data = container_of(work,
+ struct ti_thermal_data, thermal_wq);
- thermal_zone_device_update(data->omap_thermal);
+ thermal_zone_device_update(data->ti_thermal);
- dev_dbg(&data->omap_thermal->device, "updated thermal zone %s\n",
- data->omap_thermal->type);
+ dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n",
+ data->ti_thermal->type);
}
/**
- * omap_thermal_hotspot_temperature - returns sensor extrapolated temperature
+ * ti_thermal_hotspot_temperature - returns sensor extrapolated temperature
* @t: omap sensor temperature
* @s: omap sensor slope value
* @c: omap sensor const value
*/
-static inline int omap_thermal_hotspot_temperature(int t, int s, int c)
+static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
{
int delta = t * s / 1000 + c;
@@ -74,12 +74,12 @@ static inline int omap_thermal_hotspot_temperature(int t, int s, int c)
/* thermal zone ops */
/* Get temperature callback function for thermal zone*/
-static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
- unsigned long *temp)
+static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
{
- struct omap_thermal_data *data = thermal->devdata;
- struct omap_bandgap *bgp;
- struct omap_temp_sensor *s;
+ struct ti_thermal_data *data = thermal->devdata;
+ struct ti_bandgap *bgp;
+ struct ti_temp_sensor *s;
int ret, tmp, pcb_temp, slope, constant;
if (!data)
@@ -88,7 +88,7 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
bgp = data->bgp;
s = &bgp->conf->sensors[data->sensor_id];
- ret = omap_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
+ ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
if (ret)
return ret;
@@ -103,16 +103,16 @@ static inline int omap_thermal_get_temp(struct thermal_zone_device *thermal,
slope = s->slope;
constant = s->constant;
}
- *temp = omap_thermal_hotspot_temperature(tmp, slope, constant);
+ *temp = ti_thermal_hotspot_temperature(tmp, slope, constant);
return ret;
}
/* Bind callback functions for thermal zone */
-static int omap_thermal_bind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
+static int ti_thermal_bind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
int id;
if (IS_ERR_OR_NULL(data))
@@ -132,10 +132,10 @@ static int omap_thermal_bind(struct thermal_zone_device *thermal,
}
/* Unbind callback functions for thermal zone */
-static int omap_thermal_unbind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
+static int ti_thermal_unbind(struct thermal_zone_device *thermal,
+ struct thermal_cooling_device *cdev)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
if (IS_ERR_OR_NULL(data))
return -ENODEV;
@@ -149,10 +149,10 @@ static int omap_thermal_unbind(struct thermal_zone_device *thermal,
}
/* Get mode callback functions for thermal zone */
-static int omap_thermal_get_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode *mode)
+static int ti_thermal_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
if (data)
*mode = data->mode;
@@ -161,38 +161,38 @@ static int omap_thermal_get_mode(struct thermal_zone_device *thermal,
}
/* Set mode callback functions for thermal zone */
-static int omap_thermal_set_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode mode)
+static int ti_thermal_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
{
- struct omap_thermal_data *data = thermal->devdata;
+ struct ti_thermal_data *data = thermal->devdata;
- if (!data->omap_thermal) {
+ if (!data->ti_thermal) {
dev_notice(&thermal->device, "thermal zone not registered\n");
return 0;
}
- mutex_lock(&data->omap_thermal->lock);
+ mutex_lock(&data->ti_thermal->lock);
if (mode == THERMAL_DEVICE_ENABLED)
- data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+ data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
else
- data->omap_thermal->polling_delay = 0;
+ data->ti_thermal->polling_delay = 0;
- mutex_unlock(&data->omap_thermal->lock);
+ mutex_unlock(&data->ti_thermal->lock);
data->mode = mode;
- thermal_zone_device_update(data->omap_thermal);
+ thermal_zone_device_update(data->ti_thermal);
dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n",
- data->omap_thermal->polling_delay);
+ data->ti_thermal->polling_delay);
return 0;
}
/* Get trip type callback functions for thermal zone */
-static int omap_thermal_get_trip_type(struct thermal_zone_device *thermal,
- int trip, enum thermal_trip_type *type)
+static int ti_thermal_get_trip_type(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trip_type *type)
{
- if (!omap_thermal_is_valid_trip(trip))
+ if (!ti_thermal_is_valid_trip(trip))
return -EINVAL;
if (trip + 1 == OMAP_TRIP_NUMBER)
@@ -204,41 +204,41 @@ static int omap_thermal_get_trip_type(struct thermal_zone_device *thermal,
}
/* Get trip temperature callback functions for thermal zone */
-static int omap_thermal_get_trip_temp(struct thermal_zone_device *thermal,
- int trip, unsigned long *temp)
+static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal,
+ int trip, unsigned long *temp)
{
- if (!omap_thermal_is_valid_trip(trip))
+ if (!ti_thermal_is_valid_trip(trip))
return -EINVAL;
- *temp = omap_thermal_get_trip_value(trip);
+ *temp = ti_thermal_get_trip_value(trip);
return 0;
}
/* Get critical temperature callback functions for thermal zone */
-static int omap_thermal_get_crit_temp(struct thermal_zone_device *thermal,
- unsigned long *temp)
+static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
{
/* shutdown zone */
- return omap_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp);
+ return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp);
}
-static struct thermal_zone_device_ops omap_thermal_ops = {
- .get_temp = omap_thermal_get_temp,
+static struct thermal_zone_device_ops ti_thermal_ops = {
+ .get_temp = ti_thermal_get_temp,
/* TODO: add .get_trend */
- .bind = omap_thermal_bind,
- .unbind = omap_thermal_unbind,
- .get_mode = omap_thermal_get_mode,
- .set_mode = omap_thermal_set_mode,
- .get_trip_type = omap_thermal_get_trip_type,
- .get_trip_temp = omap_thermal_get_trip_temp,
- .get_crit_temp = omap_thermal_get_crit_temp,
+ .bind = ti_thermal_bind,
+ .unbind = ti_thermal_unbind,
+ .get_mode = ti_thermal_get_mode,
+ .set_mode = ti_thermal_set_mode,
+ .get_trip_type = ti_thermal_get_trip_type,
+ .get_trip_temp = ti_thermal_get_trip_temp,
+ .get_crit_temp = ti_thermal_get_crit_temp,
};
-static struct omap_thermal_data
-*omap_thermal_build_data(struct omap_bandgap *bgp, int id)
+static struct ti_thermal_data
+*ti_thermal_build_data(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
@@ -248,69 +248,69 @@ static struct omap_thermal_data
data->sensor_id = id;
data->bgp = bgp;
data->mode = THERMAL_DEVICE_ENABLED;
- INIT_WORK(&data->thermal_wq, omap_thermal_work);
+ INIT_WORK(&data->thermal_wq, ti_thermal_work);
return data;
}
-int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
- char *domain)
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
+ char *domain)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bgp, id);
+ data = ti_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
/* TODO: remove TC1 TC2 */
/* Create thermal zone */
- data->omap_thermal = thermal_zone_device_register(domain,
- OMAP_TRIP_NUMBER, 0, data, &omap_thermal_ops,
+ data->ti_thermal = thermal_zone_device_register(domain,
+ OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops,
NULL, FAST_TEMP_MONITORING_RATE,
FAST_TEMP_MONITORING_RATE);
- if (IS_ERR_OR_NULL(data->omap_thermal)) {
+ if (IS_ERR_OR_NULL(data->ti_thermal)) {
dev_err(bgp->dev, "thermal zone device is NULL\n");
- return PTR_ERR(data->omap_thermal);
+ return PTR_ERR(data->ti_thermal);
}
- data->omap_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
- omap_bandgap_set_sensor_data(bgp, id, data);
+ data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+ ti_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
- thermal_zone_device_unregister(data->omap_thermal);
+ thermal_zone_device_unregister(data->ti_thermal);
return 0;
}
-int omap_thermal_report_sensor_temperature(struct omap_bandgap *bgp, int id)
+int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
schedule_work(&data->thermal_wq);
return 0;
}
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
if (IS_ERR_OR_NULL(data))
- data = omap_thermal_build_data(bgp, id);
+ data = ti_thermal_build_data(bgp, id);
if (!data)
return -EINVAL;
@@ -322,16 +322,16 @@ int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
"Failed to register cpufreq cooling device\n");
return PTR_ERR(data->cool_dev);
}
- omap_bandgap_set_sensor_data(bgp, id, data);
+ ti_bandgap_set_sensor_data(bgp, id, data);
return 0;
}
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
{
- struct omap_thermal_data *data;
+ struct ti_thermal_data *data;
- data = omap_bandgap_get_sensor_data(bgp, id);
+ data = ti_bandgap_get_sensor_data(bgp, id);
cpufreq_cooling_unregister(data->cool_dev);
return 0;
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal.h b/drivers/staging/ti-soc-thermal/ti-thermal.h
index 3ed4adb..ef6981c 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal.h
+++ b/drivers/staging/ti-soc-thermal/ti-thermal.h
@@ -60,47 +60,45 @@
/* helper macros */
/**
- * omap_thermal_get_trip_value - returns trip temperature based on index
+ * ti_thermal_get_trip_value - returns trip temperature based on index
* @i: trip index
*/
-#define omap_thermal_get_trip_value(i) \
+#define ti_thermal_get_trip_value(i) \
(OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP))
/**
- * omap_thermal_is_valid_trip - check for trip index
+ * ti_thermal_is_valid_trip - check for trip index
* @i: trip index
*/
-#define omap_thermal_is_valid_trip(trip) \
+#define ti_thermal_is_valid_trip(trip) \
((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
#ifdef CONFIG_TI_THERMAL
-int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
- char *domain);
-int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id);
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id);
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id);
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain);
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id);
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id);
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id);
#else
static inline
-int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
- char *domain)
+int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain)
{
return 0;
}
static inline
-int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id)
+int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_register_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
{
return 0;
}
static inline
-int omap_thermal_unregister_cpu_cooling(struct omap_bandgap *bgp, int id)
+int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
{
return 0;
}
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 06/12] staging: ti-soc-thermal: make unexported functions local
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Move _ti_bandgap_write_threshold and _ti_bandgap_read_threshold to static
area, as they are local functions.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index a09ebfc..b819af0 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -475,8 +475,8 @@ exit:
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
- bool hot)
+static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
+ bool hot)
{
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *tsr;
@@ -529,8 +529,8 @@ exit:
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
- int *val, bool hot)
+static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
+ int *val, bool hot)
{
struct temp_sensor_registers *tsr;
u32 temp, mask;
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 06/12] staging: ti-soc-thermal: make unexported functions local
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Move _ti_bandgap_write_threshold and _ti_bandgap_read_threshold to static
area, as they are local functions.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index a09ebfc..b819af0 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -475,8 +475,8 @@ exit:
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
- bool hot)
+static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
+ bool hot)
{
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *tsr;
@@ -529,8 +529,8 @@ exit:
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
*/
-int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
- int *val, bool hot)
+static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
+ int *val, bool hot)
{
struct temp_sensor_registers *tsr;
u32 temp, mask;
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 07/12] staging: ti-soc-thermal: split writable data from readonly data
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
This patch changes the data structures of this driver so
that readonly data can reside only in the conf pointer.
Now each register has a struct to hold its configuration info,
to be used base on chip version for instance, and a
struct of values to be written, like register shadow and priv data.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 20 ++++--
drivers/staging/ti-soc-thermal/ti-bandgap.h | 65 +++++++++++---------
drivers/staging/ti-soc-thermal/ti-thermal-common.c | 2 +-
3 files changed, 51 insertions(+), 36 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index b819af0..2fe90e1 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -248,7 +248,7 @@ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
- struct ti_bandgap_data *conf = bgp->conf;
+ const struct ti_bandgap_data *conf = bgp->conf;
int ret = 0;
/* look up for temperature in the table and return the temperature */
@@ -276,7 +276,7 @@ exit:
static
int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
- struct ti_bandgap_data *conf = bgp->conf;
+ const struct ti_bandgap_data *conf = bgp->conf;
const int *conv_table = bgp->conf->conv_table;
int high, low, mid, ret = 0;
@@ -724,7 +724,7 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
if (ret)
return ret;
- bgp->conf->sensors[id].data = data;
+ bgp->regval[id].data = data;
return 0;
}
@@ -743,7 +743,7 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
if (ret)
return ERR_PTR(ret);
- return bgp->conf->sensors[id].data;
+ return bgp->regval[id].data;
}
/*** Helper functions used during device initialization ***/
@@ -911,6 +911,14 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
if (of_id)
bgp->conf = of_id->data;
+ /* register shadow for context save and restore */
+ bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
+ bgp->conf->sensor_count, GFP_KERNEL);
+ if (!bgp) {
+ dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
i = 0;
do {
void __iomem *chunk;
@@ -1147,7 +1155,7 @@ static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
- rval = &bgp->conf->sensors[i].regval;
+ rval = &bgp->regval[i];
tsr = bgp->conf->sensors[i].registers;
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
@@ -1180,7 +1188,7 @@ static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
struct temp_sensor_regval *rval;
u32 val = 0;
- rval = &bgp->conf->sensors[i].regval;
+ rval = &bgp->regval[i];
tsr = bgp->conf->sensors[i].registers;
if (TI_BANDGAP_HAS(bgp, COUNTER))
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
index 72c760f..394e8dd 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
@@ -30,6 +30,13 @@
/**
* DOC: bandgap driver data structure
* ==================================
+ *
+ * +----------+----------------+
+ * | struct temp_sensor_regval |
+ * +---------------------------+
+ * * (Array of)
+ * |
+ * |
* +-------------------+ +-----------------+
* | struct ti_bandgap |-->| struct device * |
* +----------+--------+ +-----------------+
@@ -47,11 +54,11 @@
* | | struct ti_temp_sensor |-->| struct temp_sensor_data | |
* | +-----------------------+ +------------+------------+ |
* | | |
- * | +--------------------------+ |
- * | V V |
- * | +----------+- --------------+ +----+-------------------------+ |
- * | | struct temp_sensor_regval | | struct temp_sensor_registers | |
- * | +---------------------------+ +------------------------------+ |
+ * | + |
+ * | V |
+ * | +----------+-------------------+ |
+ * | | struct temp_sensor_registers | |
+ * | +------------------------------+ |
* | |
* +-------------------------------------------------------------------+
*
@@ -190,10 +197,32 @@ struct temp_sensor_data {
struct ti_bandgap_data;
/**
+ * struct temp_sensor_regval - temperature sensor register values and priv data
+ * @bg_mode_ctrl: temp sensor control register value
+ * @bg_ctrl: bandgap ctrl register value
+ * @bg_counter: bandgap counter value
+ * @bg_threshold: bandgap threshold register value
+ * @tshut_threshold: bandgap tshut register value
+ * @data: private data
+ *
+ * Data structure to save and restore bandgap register set context. Only
+ * required registers are shadowed, when needed.
+ */
+struct temp_sensor_regval {
+ u32 bg_mode_ctrl;
+ u32 bg_ctrl;
+ u32 bg_counter;
+ u32 bg_threshold;
+ u32 tshut_threshold;
+ void *data;
+};
+
+/**
* struct ti_bandgap - bandgap device structure
* @dev: struct device pointer
* @base: io memory base address
* @conf: struct with bandgap configuration set (# sensors, conv_table, etc)
+ * @regval: temperature sensor register values
* @fclock: pointer to functional clock of temperature sensor
* @div_clk: pointer to divider clock of temperature sensor fclk
* @bg_mutex: mutex for ti_bandgap structure
@@ -208,7 +237,8 @@ struct ti_bandgap_data;
struct ti_bandgap {
struct device *dev;
void __iomem *base;
- struct ti_bandgap_data *conf;
+ const struct ti_bandgap_data *conf;
+ struct temp_sensor_regval *regval;
struct clk *fclock;
struct clk *div_clk;
spinlock_t lock; /* shields this struct */
@@ -218,29 +248,9 @@ struct ti_bandgap {
};
/**
- * struct temp_sensor_regval - temperature sensor register values
- * @bg_mode_ctrl: temp sensor control register value
- * @bg_ctrl: bandgap ctrl register value
- * @bg_counter: bandgap counter value
- * @bg_threshold: bandgap threshold register value
- * @tshut_threshold: bandgap tshut register value
- *
- * Data structure to save and restore bandgap register set context. Only
- * required registers are shadowed, when needed.
- */
-struct temp_sensor_regval {
- u32 bg_mode_ctrl;
- u32 bg_ctrl;
- u32 bg_counter;
- u32 bg_threshold;
- u32 tshut_threshold;
-};
-
-/**
* struct ti_temp_sensor - bandgap temperature sensor configuration data
* @ts_data: pointer to struct with thresholds, limits of temperature sensor
* @registers: pointer to the list of register offsets and bitfields
- * @regval: temperature sensor register values
* @domain: the name of the domain where the sensor is located
* @slope: sensor gradient slope info for hotspot extrapolation equation
* @const: sensor gradient const info for hotspot extrapolation equation
@@ -248,7 +258,6 @@ struct temp_sensor_regval {
* with no external influence
* @constant_pcb: sensor gradient const info for hotspot extrapolation equation
* with no external influence
- * @data: private data
* @register_cooling: function to describe how this sensor is going to be cooled
* @unregister_cooling: function to release cooling data
*
@@ -261,14 +270,12 @@ struct temp_sensor_regval {
struct ti_temp_sensor {
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *registers;
- struct temp_sensor_regval regval;
char *domain;
/* for hotspot extrapolation */
const int slope;
const int constant;
const int slope_pcb;
const int constant_pcb;
- void *data;
int (*register_cooling)(struct ti_bandgap *bgp, int id);
int (*unregister_cooling)(struct ti_bandgap *bgp, int id);
};
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
index fb50e7e..231c549 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
@@ -79,7 +79,7 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
{
struct ti_thermal_data *data = thermal->devdata;
struct ti_bandgap *bgp;
- struct ti_temp_sensor *s;
+ const struct ti_temp_sensor *s;
int ret, tmp, pcb_temp, slope, constant;
if (!data)
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 07/12] staging: ti-soc-thermal: split writable data from readonly data
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
This patch changes the data structures of this driver so
that readonly data can reside only in the conf pointer.
Now each register has a struct to hold its configuration info,
to be used base on chip version for instance, and a
struct of values to be written, like register shadow and priv data.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 20 ++++--
drivers/staging/ti-soc-thermal/ti-bandgap.h | 65 +++++++++++---------
drivers/staging/ti-soc-thermal/ti-thermal-common.c | 2 +-
3 files changed, 51 insertions(+), 36 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index b819af0..2fe90e1 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -248,7 +248,7 @@ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
- struct ti_bandgap_data *conf = bgp->conf;
+ const struct ti_bandgap_data *conf = bgp->conf;
int ret = 0;
/* look up for temperature in the table and return the temperature */
@@ -276,7 +276,7 @@ exit:
static
int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
- struct ti_bandgap_data *conf = bgp->conf;
+ const struct ti_bandgap_data *conf = bgp->conf;
const int *conv_table = bgp->conf->conv_table;
int high, low, mid, ret = 0;
@@ -724,7 +724,7 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
if (ret)
return ret;
- bgp->conf->sensors[id].data = data;
+ bgp->regval[id].data = data;
return 0;
}
@@ -743,7 +743,7 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
if (ret)
return ERR_PTR(ret);
- return bgp->conf->sensors[id].data;
+ return bgp->regval[id].data;
}
/*** Helper functions used during device initialization ***/
@@ -911,6 +911,14 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
if (of_id)
bgp->conf = of_id->data;
+ /* register shadow for context save and restore */
+ bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
+ bgp->conf->sensor_count, GFP_KERNEL);
+ if (!bgp) {
+ dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
i = 0;
do {
void __iomem *chunk;
@@ -1147,7 +1155,7 @@ static int ti_bandgap_save_ctxt(struct ti_bandgap *bgp)
struct temp_sensor_registers *tsr;
struct temp_sensor_regval *rval;
- rval = &bgp->conf->sensors[i].regval;
+ rval = &bgp->regval[i];
tsr = bgp->conf->sensors[i].registers;
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
@@ -1180,7 +1188,7 @@ static int ti_bandgap_restore_ctxt(struct ti_bandgap *bgp)
struct temp_sensor_regval *rval;
u32 val = 0;
- rval = &bgp->conf->sensors[i].regval;
+ rval = &bgp->regval[i];
tsr = bgp->conf->sensors[i].registers;
if (TI_BANDGAP_HAS(bgp, COUNTER))
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
index 72c760f..394e8dd 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
@@ -30,6 +30,13 @@
/**
* DOC: bandgap driver data structure
* ==================================
+ *
+ * +----------+----------------+
+ * | struct temp_sensor_regval |
+ * +---------------------------+
+ * * (Array of)
+ * |
+ * |
* +-------------------+ +-----------------+
* | struct ti_bandgap |-->| struct device * |
* +----------+--------+ +-----------------+
@@ -47,11 +54,11 @@
* | | struct ti_temp_sensor |-->| struct temp_sensor_data | |
* | +-----------------------+ +------------+------------+ |
* | | |
- * | +--------------------------+ |
- * | V V |
- * | +----------+- --------------+ +----+-------------------------+ |
- * | | struct temp_sensor_regval | | struct temp_sensor_registers | |
- * | +---------------------------+ +------------------------------+ |
+ * | + |
+ * | V |
+ * | +----------+-------------------+ |
+ * | | struct temp_sensor_registers | |
+ * | +------------------------------+ |
* | |
* +-------------------------------------------------------------------+
*
@@ -190,10 +197,32 @@ struct temp_sensor_data {
struct ti_bandgap_data;
/**
+ * struct temp_sensor_regval - temperature sensor register values and priv data
+ * @bg_mode_ctrl: temp sensor control register value
+ * @bg_ctrl: bandgap ctrl register value
+ * @bg_counter: bandgap counter value
+ * @bg_threshold: bandgap threshold register value
+ * @tshut_threshold: bandgap tshut register value
+ * @data: private data
+ *
+ * Data structure to save and restore bandgap register set context. Only
+ * required registers are shadowed, when needed.
+ */
+struct temp_sensor_regval {
+ u32 bg_mode_ctrl;
+ u32 bg_ctrl;
+ u32 bg_counter;
+ u32 bg_threshold;
+ u32 tshut_threshold;
+ void *data;
+};
+
+/**
* struct ti_bandgap - bandgap device structure
* @dev: struct device pointer
* @base: io memory base address
* @conf: struct with bandgap configuration set (# sensors, conv_table, etc)
+ * @regval: temperature sensor register values
* @fclock: pointer to functional clock of temperature sensor
* @div_clk: pointer to divider clock of temperature sensor fclk
* @bg_mutex: mutex for ti_bandgap structure
@@ -208,7 +237,8 @@ struct ti_bandgap_data;
struct ti_bandgap {
struct device *dev;
void __iomem *base;
- struct ti_bandgap_data *conf;
+ const struct ti_bandgap_data *conf;
+ struct temp_sensor_regval *regval;
struct clk *fclock;
struct clk *div_clk;
spinlock_t lock; /* shields this struct */
@@ -218,29 +248,9 @@ struct ti_bandgap {
};
/**
- * struct temp_sensor_regval - temperature sensor register values
- * @bg_mode_ctrl: temp sensor control register value
- * @bg_ctrl: bandgap ctrl register value
- * @bg_counter: bandgap counter value
- * @bg_threshold: bandgap threshold register value
- * @tshut_threshold: bandgap tshut register value
- *
- * Data structure to save and restore bandgap register set context. Only
- * required registers are shadowed, when needed.
- */
-struct temp_sensor_regval {
- u32 bg_mode_ctrl;
- u32 bg_ctrl;
- u32 bg_counter;
- u32 bg_threshold;
- u32 tshut_threshold;
-};
-
-/**
* struct ti_temp_sensor - bandgap temperature sensor configuration data
* @ts_data: pointer to struct with thresholds, limits of temperature sensor
* @registers: pointer to the list of register offsets and bitfields
- * @regval: temperature sensor register values
* @domain: the name of the domain where the sensor is located
* @slope: sensor gradient slope info for hotspot extrapolation equation
* @const: sensor gradient const info for hotspot extrapolation equation
@@ -248,7 +258,6 @@ struct temp_sensor_regval {
* with no external influence
* @constant_pcb: sensor gradient const info for hotspot extrapolation equation
* with no external influence
- * @data: private data
* @register_cooling: function to describe how this sensor is going to be cooled
* @unregister_cooling: function to release cooling data
*
@@ -261,14 +270,12 @@ struct temp_sensor_regval {
struct ti_temp_sensor {
struct temp_sensor_data *ts_data;
struct temp_sensor_registers *registers;
- struct temp_sensor_regval regval;
char *domain;
/* for hotspot extrapolation */
const int slope;
const int constant;
const int slope_pcb;
const int constant_pcb;
- void *data;
int (*register_cooling)(struct ti_bandgap *bgp, int id);
int (*unregister_cooling)(struct ti_bandgap *bgp, int id);
};
diff --git a/drivers/staging/ti-soc-thermal/ti-thermal-common.c b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
index fb50e7e..231c549 100644
--- a/drivers/staging/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/staging/ti-soc-thermal/ti-thermal-common.c
@@ -79,7 +79,7 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
{
struct ti_thermal_data *data = thermal->devdata;
struct ti_bandgap *bgp;
- struct ti_temp_sensor *s;
+ const struct ti_temp_sensor *s;
int ret, tmp, pcb_temp, slope, constant;
if (!data)
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 08/12] stating: ti-soc-thermal: use sizeof(*pointer) while allocating
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Follow Documentation/CodingStyle and use sizeof(*pointer)
instead of sizeof(struct type).
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 2fe90e1..7d67f72 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -900,8 +900,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
return ERR_PTR(-EINVAL);
}
- bgp = devm_kzalloc(&pdev->dev, sizeof(struct ti_bandgap),
- GFP_KERNEL);
+ bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
if (!bgp) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 08/12] stating: ti-soc-thermal: use sizeof(*pointer) while allocating
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Follow Documentation/CodingStyle and use sizeof(*pointer)
instead of sizeof(struct type).
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 2fe90e1..7d67f72 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -900,8 +900,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
return ERR_PTR(-EINVAL);
}
- bgp = devm_kzalloc(&pdev->dev, sizeof(struct ti_bandgap),
- GFP_KERNEL);
+ bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL);
if (!bgp) {
dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
return ERR_PTR(-ENOMEM);
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Nishanth Menon
This patch updates the documentation to remove
all warnings and errors reported by scripts/kernel-doc.
Most are missing arguments due to wrong format.
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 56 +++++++++++++-------------
drivers/staging/ti-soc-thermal/ti-bandgap.h | 8 ++--
2 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 7d67f72..a9d6d2a 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -340,6 +340,7 @@ exit:
/**
* ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
* @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
* @t_hot: hot temperature value to trigger alert signal
* @t_cold: cold temperature value to trigger alert signal
*
@@ -570,9 +571,9 @@ exit:
/**
* ti_bandgap_read_thot() - reads sensor current thot
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @thot - resulting current thot value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @thot: resulting current thot value
*
* returns 0 on success or the proper error code
*/
@@ -583,9 +584,9 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
/**
* ti_bandgap_write_thot() - sets sensor current thot
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @val - desired thot value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @val: desired thot value
*
* returns 0 on success or the proper error code
*/
@@ -596,9 +597,9 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
/**
* ti_bandgap_read_tcold() - reads sensor current tcold
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @tcold - resulting current tcold value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @tcold: resulting current tcold value
*
* returns 0 on success or the proper error code
*/
@@ -609,9 +610,9 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
/**
* ti_bandgap_write_tcold() - sets the sensor tcold
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @val - desired tcold value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @val: desired tcold value
*
* returns 0 on success or the proper error code
*/
@@ -622,9 +623,9 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
/**
* ti_bandgap_read_update_interval() - read the sensor update interval
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @interval - resulting update interval in miliseconds
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
@@ -654,9 +655,9 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
/**
* ti_bandgap_write_update_interval() - set the update interval
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @interval - desired update interval in miliseconds
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
@@ -680,9 +681,9 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
/**
* ti_bandgap_read_temperature() - report current temperature
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @temperature - resulting temperature
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @temperature: resulting temperature
*
* returns 0 on success or the proper error code
*/
@@ -712,9 +713,9 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
/**
* ti_bandgap_set_sensor_data() - helper function to store thermal
* framework related data.
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @data - thermal framework related data to be stored
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @data: thermal framework related data to be stored
*
* returns 0 on success or the proper error code
*/
@@ -732,8 +733,8 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
/**
* ti_bandgap_get_sensor_data() - helper function to get thermal
* framework related data.
- * @bgp - pointer to bandgap instance
- * @id - sensor id
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
*
* returns data stored by set function with sensor id on success or NULL
*/
@@ -875,16 +876,15 @@ static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
return 0;
}
+static const struct of_device_id of_ti_bandgap_match[];
/**
* ti_bandgap_build() - parse DT and setup a struct ti_bandgap
- * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Used to read the device tree properties accordingly to the bandgap
* matching version. Based on bandgap version and its capabilities it
* will build a struct ti_bandgap out of the required DT entries.
*/
-static const struct of_device_id of_ti_bandgap_match[];
static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
index 394e8dd..04c6ec2 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
@@ -225,7 +225,7 @@ struct temp_sensor_regval {
* @regval: temperature sensor register values
* @fclock: pointer to functional clock of temperature sensor
* @div_clk: pointer to divider clock of temperature sensor fclk
- * @bg_mutex: mutex for ti_bandgap structure
+ * @lock: spinlock for ti_bandgap structure
* @irq: MPU IRQ number for thermal alert
* @tshut_gpio: GPIO where Tshut signal is routed
* @clk_rate: Holds current clock rate
@@ -253,7 +253,7 @@ struct ti_bandgap {
* @registers: pointer to the list of register offsets and bitfields
* @domain: the name of the domain where the sensor is located
* @slope: sensor gradient slope info for hotspot extrapolation equation
- * @const: sensor gradient const info for hotspot extrapolation equation
+ * @constant: sensor gradient const info for hotspot extrapolation equation
* @slope_pcb: sensor gradient slope info for hotspot extrapolation equation
* with no external influence
* @constant_pcb: sensor gradient const info for hotspot extrapolation equation
@@ -281,7 +281,7 @@ struct ti_temp_sensor {
};
/**
- * DOC: omap bandgap feature types
+ * DOC: ti bandgap feature types
*
* TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
* of a bandgap device instance is routed to the processor. This means
@@ -325,7 +325,7 @@ struct ti_temp_sensor {
((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
/**
- * struct ti_bandgap_data - omap bandgap data configuration structure
+ * struct ti_bandgap_data - ti bandgap data configuration structure
* @features: a bitwise flag set to describe the device features
* @conv_table: Pointer to ADC to temperature conversion table
* @adc_start_val: ADC conversion table starting value
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh
Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin,
Nishanth Menon
This patch updates the documentation to remove
all warnings and errors reported by scripts/kernel-doc.
Most are missing arguments due to wrong format.
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 56 +++++++++++++-------------
drivers/staging/ti-soc-thermal/ti-bandgap.h | 8 ++--
2 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 7d67f72..a9d6d2a 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -340,6 +340,7 @@ exit:
/**
* ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
* @bgp: struct ti_bandgap pointer
+ * @id: bandgap sensor id
* @t_hot: hot temperature value to trigger alert signal
* @t_cold: cold temperature value to trigger alert signal
*
@@ -570,9 +571,9 @@ exit:
/**
* ti_bandgap_read_thot() - reads sensor current thot
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @thot - resulting current thot value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @thot: resulting current thot value
*
* returns 0 on success or the proper error code
*/
@@ -583,9 +584,9 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
/**
* ti_bandgap_write_thot() - sets sensor current thot
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @val - desired thot value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @val: desired thot value
*
* returns 0 on success or the proper error code
*/
@@ -596,9 +597,9 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
/**
* ti_bandgap_read_tcold() - reads sensor current tcold
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @tcold - resulting current tcold value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @tcold: resulting current tcold value
*
* returns 0 on success or the proper error code
*/
@@ -609,9 +610,9 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
/**
* ti_bandgap_write_tcold() - sets the sensor tcold
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @val - desired tcold value
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @val: desired tcold value
*
* returns 0 on success or the proper error code
*/
@@ -622,9 +623,9 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
/**
* ti_bandgap_read_update_interval() - read the sensor update interval
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @interval - resulting update interval in miliseconds
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: resulting update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
@@ -654,9 +655,9 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
/**
* ti_bandgap_write_update_interval() - set the update interval
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @interval - desired update interval in miliseconds
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @interval: desired update interval in miliseconds
*
* returns 0 on success or the proper error code
*/
@@ -680,9 +681,9 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
/**
* ti_bandgap_read_temperature() - report current temperature
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @temperature - resulting temperature
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @temperature: resulting temperature
*
* returns 0 on success or the proper error code
*/
@@ -712,9 +713,9 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
/**
* ti_bandgap_set_sensor_data() - helper function to store thermal
* framework related data.
- * @bgp - pointer to bandgap instance
- * @id - sensor id
- * @data - thermal framework related data to be stored
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
+ * @data: thermal framework related data to be stored
*
* returns 0 on success or the proper error code
*/
@@ -732,8 +733,8 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
/**
* ti_bandgap_get_sensor_data() - helper function to get thermal
* framework related data.
- * @bgp - pointer to bandgap instance
- * @id - sensor id
+ * @bgp: pointer to bandgap instance
+ * @id: sensor id
*
* returns data stored by set function with sensor id on success or NULL
*/
@@ -875,16 +876,15 @@ static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
return 0;
}
+static const struct of_device_id of_ti_bandgap_match[];
/**
* ti_bandgap_build() - parse DT and setup a struct ti_bandgap
- * @bgp: pointer to struct ti_bandgap
* @pdev: pointer to device struct platform_device
*
* Used to read the device tree properties accordingly to the bandgap
* matching version. Based on bandgap version and its capabilities it
* will build a struct ti_bandgap out of the required DT entries.
*/
-static const struct of_device_id of_ti_bandgap_match[];
static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
index 394e8dd..04c6ec2 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
@@ -225,7 +225,7 @@ struct temp_sensor_regval {
* @regval: temperature sensor register values
* @fclock: pointer to functional clock of temperature sensor
* @div_clk: pointer to divider clock of temperature sensor fclk
- * @bg_mutex: mutex for ti_bandgap structure
+ * @lock: spinlock for ti_bandgap structure
* @irq: MPU IRQ number for thermal alert
* @tshut_gpio: GPIO where Tshut signal is routed
* @clk_rate: Holds current clock rate
@@ -253,7 +253,7 @@ struct ti_bandgap {
* @registers: pointer to the list of register offsets and bitfields
* @domain: the name of the domain where the sensor is located
* @slope: sensor gradient slope info for hotspot extrapolation equation
- * @const: sensor gradient const info for hotspot extrapolation equation
+ * @constant: sensor gradient const info for hotspot extrapolation equation
* @slope_pcb: sensor gradient slope info for hotspot extrapolation equation
* with no external influence
* @constant_pcb: sensor gradient const info for hotspot extrapolation equation
@@ -281,7 +281,7 @@ struct ti_temp_sensor {
};
/**
- * DOC: omap bandgap feature types
+ * DOC: ti bandgap feature types
*
* TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
* of a bandgap device instance is routed to the processor. This means
@@ -325,7 +325,7 @@ struct ti_temp_sensor {
((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
/**
- * struct ti_bandgap_data - omap bandgap data configuration structure
+ * struct ti_bandgap_data - ti bandgap data configuration structure
* @features: a bitwise flag set to describe the device features
* @conv_table: Pointer to ADC to temperature conversion table
* @adc_start_val: ADC conversion table starting value
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 19:22 ` Nishanth Menon
-1 siblings, 0 replies; 35+ messages in thread
From: Nishanth Menon @ 2013-03-19 19:22 UTC (permalink / raw)
To: Eduardo Valentin; +Cc: gregkh, devel, linux-omap, linux-kernel, linux-pm
On 10:54-20130319, Eduardo Valentin wrote:
> This patch updates the documentation to remove
> all warnings and errors reported by scripts/kernel-doc.
> Most are missing arguments due to wrong format.
>
> Cc: Nishanth Menon <nm@ti.com>
>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> drivers/staging/ti-soc-thermal/ti-bandgap.c | 56 +++++++++++++-------------
> drivers/staging/ti-soc-thermal/ti-bandgap.h | 8 ++--
> 2 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> index 7d67f72..a9d6d2a 100644
> --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> @@ -340,6 +340,7 @@ exit:
> /**
> * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
> * @bgp: struct ti_bandgap pointer
> + * @id: bandgap sensor id
> * @t_hot: hot temperature value to trigger alert signal
> * @t_cold: cold temperature value to trigger alert signal
> *
> @@ -570,9 +571,9 @@ exit:
>
> /**
> * ti_bandgap_read_thot() - reads sensor current thot
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @thot - resulting current thot value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @thot: resulting current thot value
> *
> * returns 0 on success or the proper error code
> */
> @@ -583,9 +584,9 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
>
> /**
> * ti_bandgap_write_thot() - sets sensor current thot
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @val - desired thot value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @val: desired thot value
> *
> * returns 0 on success or the proper error code
> */
> @@ -596,9 +597,9 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
>
> /**
> * ti_bandgap_read_tcold() - reads sensor current tcold
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @tcold - resulting current tcold value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @tcold: resulting current tcold value
> *
> * returns 0 on success or the proper error code
> */
> @@ -609,9 +610,9 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
>
> /**
> * ti_bandgap_write_tcold() - sets the sensor tcold
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @val - desired tcold value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @val: desired tcold value
> *
> * returns 0 on success or the proper error code
> */
> @@ -622,9 +623,9 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
>
> /**
> * ti_bandgap_read_update_interval() - read the sensor update interval
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @interval - resulting update interval in miliseconds
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @interval: resulting update interval in miliseconds
> *
> * returns 0 on success or the proper error code
> */
> @@ -654,9 +655,9 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
>
> /**
> * ti_bandgap_write_update_interval() - set the update interval
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @interval - desired update interval in miliseconds
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @interval: desired update interval in miliseconds
> *
> * returns 0 on success or the proper error code
> */
> @@ -680,9 +681,9 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
>
> /**
> * ti_bandgap_read_temperature() - report current temperature
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @temperature - resulting temperature
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @temperature: resulting temperature
> *
> * returns 0 on success or the proper error code
> */
> @@ -712,9 +713,9 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
> /**
> * ti_bandgap_set_sensor_data() - helper function to store thermal
> * framework related data.
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @data - thermal framework related data to be stored
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @data: thermal framework related data to be stored
> *
> * returns 0 on success or the proper error code
> */
> @@ -732,8 +733,8 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
> /**
> * ti_bandgap_get_sensor_data() - helper function to get thermal
> * framework related data.
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> *
> * returns data stored by set function with sensor id on success or NULL
> */
> @@ -875,16 +876,15 @@ static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
> return 0;
> }
>
> +static const struct of_device_id of_ti_bandgap_match[];
> /**
> * ti_bandgap_build() - parse DT and setup a struct ti_bandgap
> - * @bgp: pointer to struct ti_bandgap
> * @pdev: pointer to device struct platform_device
> *
> * Used to read the device tree properties accordingly to the bandgap
> * matching version. Based on bandgap version and its capabilities it
> * will build a struct ti_bandgap out of the required DT entries.
> */
> -static const struct of_device_id of_ti_bandgap_match[];
> static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> {
> struct device_node *node = pdev->dev.of_node;
> diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
> index 394e8dd..04c6ec2 100644
> --- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
> +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
> @@ -225,7 +225,7 @@ struct temp_sensor_regval {
> * @regval: temperature sensor register values
> * @fclock: pointer to functional clock of temperature sensor
> * @div_clk: pointer to divider clock of temperature sensor fclk
> - * @bg_mutex: mutex for ti_bandgap structure
> + * @lock: spinlock for ti_bandgap structure
> * @irq: MPU IRQ number for thermal alert
> * @tshut_gpio: GPIO where Tshut signal is routed
> * @clk_rate: Holds current clock rate
> @@ -253,7 +253,7 @@ struct ti_bandgap {
> * @registers: pointer to the list of register offsets and bitfields
> * @domain: the name of the domain where the sensor is located
> * @slope: sensor gradient slope info for hotspot extrapolation equation
> - * @const: sensor gradient const info for hotspot extrapolation equation
> + * @constant: sensor gradient const info for hotspot extrapolation equation
> * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation
> * with no external influence
> * @constant_pcb: sensor gradient const info for hotspot extrapolation equation
> @@ -281,7 +281,7 @@ struct ti_temp_sensor {
> };
>
> /**
> - * DOC: omap bandgap feature types
> + * DOC: ti bandgap feature types
> *
> * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
> * of a bandgap device instance is routed to the processor. This means
> @@ -325,7 +325,7 @@ struct ti_temp_sensor {
> ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
>
> /**
> - * struct ti_bandgap_data - omap bandgap data configuration structure
> + * struct ti_bandgap_data - ti bandgap data configuration structure
> * @features: a bitwise flag set to describe the device features
> * @conv_table: Pointer to ADC to temperature conversion table
> * @adc_start_val: ADC conversion table starting value
You may still want to fix warnings generated by:
./scripts/kernel-doc -v drivers/staging/ti-soc-thermal/ti-bandgap.c>/dev/null
For example - the following changes are required for proper error return
documentation (following diff is just an hint):
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index d479e50..0adae05 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -50,7 +50,7 @@
* @reg: desired register (offset) to be read
*
* Helper function to read bandgap registers. It uses the io remapped area.
- * Returns the register value.
+ * Return: the register value.
*/
static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
{
@@ -97,6 +97,8 @@ do { \
*
* Used to power on/off a bandgap device instance. Only used on those
* that features tempsoff bit.
+ *
+ * Return: 0
*/
static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
@@ -122,6 +124,8 @@ exit:
* This function is desired because, depending on bandgap device version,
* it might be needed to freeze the bandgap state machine, before fetching
* the register value.
+ *
+ * Return: temperature in ...
*/
static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
{
@@ -162,6 +166,8 @@ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
* conditions and acts accordingly. In case there are events pending,
* it will reset the event mask to wait for the opposite event (next event).
* Every time there is a new event, it will be reported to thermal layer.
+ *
+ * Return: IRQ_HANDLED
*/
static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
{
@@ -222,6 +228,8 @@ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
* This is the Tshut handler. Use it only if bandgap device features
* HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
* the system.
+ *
+ * Return: IRQ_HANDLED
*/
static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
{
@@ -244,6 +252,8 @@ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
* Simple conversion from ADC representation to mCelsius. In case the ADC value
* is out of the ADC conv table range, it returns -ERANGE, 0 on success.
* The conversion table is indexed by the ADC values.
+ *
+ * Return: 0 if converstion was successful, else -ERANGE if out of range
*/
static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
@@ -272,6 +282,8 @@ exit:
* Simple conversion from mCelsius to ADC values. In case the temp value
* is out of the ADC conv table range, it returns -ERANGE, 0 on success.
* The conversion table is indexed by the ADC values.
+ *
+ * Return: 0 if converstion was successful, else -ERANGE if out of range
*/
static
int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
@@ -311,7 +323,8 @@ exit:
* @sum: address where to write the resulting temperature (in ADC scale)
*
* Adds an hysteresis value (in mCelsius) to a ADC temperature value.
- * Returns 0 on success, -ERANGE otherwise.
+ *
+ * Return: 0 on success, -ERANGE otherwise.
*/
static
int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
@@ -384,6 +397,8 @@ static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
* It checks the resulting t_hot and t_cold values, based on the new passed @val
* and configures the thresholds so that t_hot is always greater than t_cold.
* Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, else corresponding error
*/
static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
int val, bool hot)
@@ -442,6 +457,8 @@ exit:
*
* Checks if the bandgap pointer is valid and if the sensor id is also
* applicable.
+ *
+ * Return: 0 if no errors, -EINVAL for bad parameter or -ERANGE if out of range
*/
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
@@ -475,6 +492,8 @@ exit:
* This function can be used to update t_hot or t_cold, depending on @hot value.
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, else corresponding error value.
*/
static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
bool hot)
@@ -529,6 +548,8 @@ exit:
* It will fetch the required thresholds (hot and cold) for TALERT signal.
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, if it has no TALERT support, returns -ENOTSUPP....
*/
static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
int *val, bool hot)
@@ -575,7 +596,7 @@ exit:
* @id: sensor id
* @thot: resulting current thot value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
{
@@ -588,7 +609,7 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
* @id: sensor id
* @val: desired thot value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
{
@@ -601,7 +622,7 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
* @id: sensor id
* @tcold: resulting current tcold value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
{
@@ -614,7 +635,7 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
* @id: sensor id
* @val: desired tcold value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
{
@@ -627,7 +648,7 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
* @id: sensor id
* @interval: resulting update interval in miliseconds
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
int *interval)
@@ -659,7 +680,7 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
* @id: sensor id
* @interval: desired update interval in miliseconds
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
int id, u32 interval)
@@ -685,7 +706,7 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
* @id: sensor id
* @temperature: resulting temperature
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
int *temperature)
@@ -717,7 +738,7 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
* @id: sensor id
* @data: thermal framework related data to be stored
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
{
@@ -736,7 +757,7 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
* @bgp: pointer to bandgap instance
* @id: sensor id
*
- * returns data stored by set function with sensor id on success or NULL
+ * Return: data stored by set function with sensor id on success or NULL
*/
void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
{
@@ -756,6 +777,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
*
* Used to initialize the conversion state machine and set it to a valid
* state. Called during device initialization and context restore events.
+ *
+ * Return: 0
*/
static int
ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
@@ -789,6 +812,8 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
* be used for junction temperature monitoring, it is desirable that the
* sensors are operational all the time, so that alerts are generated
* properly.
+ *
+ * Return: 0
*/
static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
{
@@ -814,6 +839,8 @@ static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
* to specify which GPIO line is used. TSHUT IRQ is fired anytime
* one of the bandgap sensors violates the TSHUT high/hot threshold.
* And in that case, the system must go off.
+ *
+ * Return: 0 if no error, else error status
*/
static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
struct platform_device *pdev)
@@ -853,6 +880,8 @@ static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
* TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
* are violated. In these situation, the driver must reprogram the thresholds,
* accordingly to specified policy.
+ *
+ * Return: 0 if no error, else return corresponding error.
*/
static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
struct platform_device *pdev)
@@ -884,6 +913,9 @@ static const struct of_device_id of_ti_bandgap_match[];
* Used to read the device tree properties accordingly to the bandgap
* matching version. Based on bandgap version and its capabilities it
* will build a struct ti_bandgap out of the required DT entries.
+ *
+ * Return: valid bandgap structure if successful, else returns ERR_PTR
+ * return value must be verified with IS_ERR.
*/
static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
--
Regards,
Nishanth Menon
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
@ 2013-03-19 19:22 ` Nishanth Menon
0 siblings, 0 replies; 35+ messages in thread
From: Nishanth Menon @ 2013-03-19 19:22 UTC (permalink / raw)
To: Eduardo Valentin; +Cc: gregkh, devel, linux-omap, linux-kernel, linux-pm
On 10:54-20130319, Eduardo Valentin wrote:
> This patch updates the documentation to remove
> all warnings and errors reported by scripts/kernel-doc.
> Most are missing arguments due to wrong format.
>
> Cc: Nishanth Menon <nm@ti.com>
>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> drivers/staging/ti-soc-thermal/ti-bandgap.c | 56 +++++++++++++-------------
> drivers/staging/ti-soc-thermal/ti-bandgap.h | 8 ++--
> 2 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> index 7d67f72..a9d6d2a 100644
> --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> @@ -340,6 +340,7 @@ exit:
> /**
> * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
> * @bgp: struct ti_bandgap pointer
> + * @id: bandgap sensor id
> * @t_hot: hot temperature value to trigger alert signal
> * @t_cold: cold temperature value to trigger alert signal
> *
> @@ -570,9 +571,9 @@ exit:
>
> /**
> * ti_bandgap_read_thot() - reads sensor current thot
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @thot - resulting current thot value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @thot: resulting current thot value
> *
> * returns 0 on success or the proper error code
> */
> @@ -583,9 +584,9 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
>
> /**
> * ti_bandgap_write_thot() - sets sensor current thot
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @val - desired thot value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @val: desired thot value
> *
> * returns 0 on success or the proper error code
> */
> @@ -596,9 +597,9 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
>
> /**
> * ti_bandgap_read_tcold() - reads sensor current tcold
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @tcold - resulting current tcold value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @tcold: resulting current tcold value
> *
> * returns 0 on success or the proper error code
> */
> @@ -609,9 +610,9 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
>
> /**
> * ti_bandgap_write_tcold() - sets the sensor tcold
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @val - desired tcold value
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @val: desired tcold value
> *
> * returns 0 on success or the proper error code
> */
> @@ -622,9 +623,9 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
>
> /**
> * ti_bandgap_read_update_interval() - read the sensor update interval
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @interval - resulting update interval in miliseconds
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @interval: resulting update interval in miliseconds
> *
> * returns 0 on success or the proper error code
> */
> @@ -654,9 +655,9 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
>
> /**
> * ti_bandgap_write_update_interval() - set the update interval
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @interval - desired update interval in miliseconds
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @interval: desired update interval in miliseconds
> *
> * returns 0 on success or the proper error code
> */
> @@ -680,9 +681,9 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
>
> /**
> * ti_bandgap_read_temperature() - report current temperature
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @temperature - resulting temperature
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @temperature: resulting temperature
> *
> * returns 0 on success or the proper error code
> */
> @@ -712,9 +713,9 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
> /**
> * ti_bandgap_set_sensor_data() - helper function to store thermal
> * framework related data.
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> - * @data - thermal framework related data to be stored
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> + * @data: thermal framework related data to be stored
> *
> * returns 0 on success or the proper error code
> */
> @@ -732,8 +733,8 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
> /**
> * ti_bandgap_get_sensor_data() - helper function to get thermal
> * framework related data.
> - * @bgp - pointer to bandgap instance
> - * @id - sensor id
> + * @bgp: pointer to bandgap instance
> + * @id: sensor id
> *
> * returns data stored by set function with sensor id on success or NULL
> */
> @@ -875,16 +876,15 @@ static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
> return 0;
> }
>
> +static const struct of_device_id of_ti_bandgap_match[];
> /**
> * ti_bandgap_build() - parse DT and setup a struct ti_bandgap
> - * @bgp: pointer to struct ti_bandgap
> * @pdev: pointer to device struct platform_device
> *
> * Used to read the device tree properties accordingly to the bandgap
> * matching version. Based on bandgap version and its capabilities it
> * will build a struct ti_bandgap out of the required DT entries.
> */
> -static const struct of_device_id of_ti_bandgap_match[];
> static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> {
> struct device_node *node = pdev->dev.of_node;
> diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.h b/drivers/staging/ti-soc-thermal/ti-bandgap.h
> index 394e8dd..04c6ec2 100644
> --- a/drivers/staging/ti-soc-thermal/ti-bandgap.h
> +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.h
> @@ -225,7 +225,7 @@ struct temp_sensor_regval {
> * @regval: temperature sensor register values
> * @fclock: pointer to functional clock of temperature sensor
> * @div_clk: pointer to divider clock of temperature sensor fclk
> - * @bg_mutex: mutex for ti_bandgap structure
> + * @lock: spinlock for ti_bandgap structure
> * @irq: MPU IRQ number for thermal alert
> * @tshut_gpio: GPIO where Tshut signal is routed
> * @clk_rate: Holds current clock rate
> @@ -253,7 +253,7 @@ struct ti_bandgap {
> * @registers: pointer to the list of register offsets and bitfields
> * @domain: the name of the domain where the sensor is located
> * @slope: sensor gradient slope info for hotspot extrapolation equation
> - * @const: sensor gradient const info for hotspot extrapolation equation
> + * @constant: sensor gradient const info for hotspot extrapolation equation
> * @slope_pcb: sensor gradient slope info for hotspot extrapolation equation
> * with no external influence
> * @constant_pcb: sensor gradient const info for hotspot extrapolation equation
> @@ -281,7 +281,7 @@ struct ti_temp_sensor {
> };
>
> /**
> - * DOC: omap bandgap feature types
> + * DOC: ti bandgap feature types
> *
> * TI_BANDGAP_FEATURE_TSHUT - used when the thermal shutdown signal output
> * of a bandgap device instance is routed to the processor. This means
> @@ -325,7 +325,7 @@ struct ti_temp_sensor {
> ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
>
> /**
> - * struct ti_bandgap_data - omap bandgap data configuration structure
> + * struct ti_bandgap_data - ti bandgap data configuration structure
> * @features: a bitwise flag set to describe the device features
> * @conv_table: Pointer to ADC to temperature conversion table
> * @adc_start_val: ADC conversion table starting value
You may still want to fix warnings generated by:
./scripts/kernel-doc -v drivers/staging/ti-soc-thermal/ti-bandgap.c>/dev/null
For example - the following changes are required for proper error return
documentation (following diff is just an hint):
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index d479e50..0adae05 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -50,7 +50,7 @@
* @reg: desired register (offset) to be read
*
* Helper function to read bandgap registers. It uses the io remapped area.
- * Returns the register value.
+ * Return: the register value.
*/
static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
{
@@ -97,6 +97,8 @@ do { \
*
* Used to power on/off a bandgap device instance. Only used on those
* that features tempsoff bit.
+ *
+ * Return: 0
*/
static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
@@ -122,6 +124,8 @@ exit:
* This function is desired because, depending on bandgap device version,
* it might be needed to freeze the bandgap state machine, before fetching
* the register value.
+ *
+ * Return: temperature in ...
*/
static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
{
@@ -162,6 +166,8 @@ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
* conditions and acts accordingly. In case there are events pending,
* it will reset the event mask to wait for the opposite event (next event).
* Every time there is a new event, it will be reported to thermal layer.
+ *
+ * Return: IRQ_HANDLED
*/
static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
{
@@ -222,6 +228,8 @@ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
* This is the Tshut handler. Use it only if bandgap device features
* HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
* the system.
+ *
+ * Return: IRQ_HANDLED
*/
static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
{
@@ -244,6 +252,8 @@ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
* Simple conversion from ADC representation to mCelsius. In case the ADC value
* is out of the ADC conv table range, it returns -ERANGE, 0 on success.
* The conversion table is indexed by the ADC values.
+ *
+ * Return: 0 if converstion was successful, else -ERANGE if out of range
*/
static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
@@ -272,6 +282,8 @@ exit:
* Simple conversion from mCelsius to ADC values. In case the temp value
* is out of the ADC conv table range, it returns -ERANGE, 0 on success.
* The conversion table is indexed by the ADC values.
+ *
+ * Return: 0 if converstion was successful, else -ERANGE if out of range
*/
static
int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
@@ -311,7 +323,8 @@ exit:
* @sum: address where to write the resulting temperature (in ADC scale)
*
* Adds an hysteresis value (in mCelsius) to a ADC temperature value.
- * Returns 0 on success, -ERANGE otherwise.
+ *
+ * Return: 0 on success, -ERANGE otherwise.
*/
static
int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
@@ -384,6 +397,8 @@ static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
* It checks the resulting t_hot and t_cold values, based on the new passed @val
* and configures the thresholds so that t_hot is always greater than t_cold.
* Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, else corresponding error
*/
static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
int val, bool hot)
@@ -442,6 +457,8 @@ exit:
*
* Checks if the bandgap pointer is valid and if the sensor id is also
* applicable.
+ *
+ * Return: 0 if no errors, -EINVAL for bad parameter or -ERANGE if out of range
*/
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
@@ -475,6 +492,8 @@ exit:
* This function can be used to update t_hot or t_cold, depending on @hot value.
* Validates the mCelsius range and update the requested threshold.
* Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, else corresponding error value.
*/
static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
bool hot)
@@ -529,6 +548,8 @@ exit:
* It will fetch the required thresholds (hot and cold) for TALERT signal.
* This function can be used to read t_hot or t_cold, depending on @hot value.
* Call this function only if bandgap features HAS(TALERT).
+ *
+ * Return: 0 if no error, if it has no TALERT support, returns -ENOTSUPP....
*/
static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
int *val, bool hot)
@@ -575,7 +596,7 @@ exit:
* @id: sensor id
* @thot: resulting current thot value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
{
@@ -588,7 +609,7 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
* @id: sensor id
* @val: desired thot value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
{
@@ -601,7 +622,7 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
* @id: sensor id
* @tcold: resulting current tcold value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
{
@@ -614,7 +635,7 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
* @id: sensor id
* @val: desired tcold value
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
{
@@ -627,7 +648,7 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
* @id: sensor id
* @interval: resulting update interval in miliseconds
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
int *interval)
@@ -659,7 +680,7 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
* @id: sensor id
* @interval: desired update interval in miliseconds
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
int id, u32 interval)
@@ -685,7 +706,7 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
* @id: sensor id
* @temperature: resulting temperature
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
int *temperature)
@@ -717,7 +738,7 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
* @id: sensor id
* @data: thermal framework related data to be stored
*
- * returns 0 on success or the proper error code
+ * Return: 0 on success or the proper error code
*/
int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
{
@@ -736,7 +757,7 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
* @bgp: pointer to bandgap instance
* @id: sensor id
*
- * returns data stored by set function with sensor id on success or NULL
+ * Return: data stored by set function with sensor id on success or NULL
*/
void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
{
@@ -756,6 +777,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
*
* Used to initialize the conversion state machine and set it to a valid
* state. Called during device initialization and context restore events.
+ *
+ * Return: 0
*/
static int
ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
@@ -789,6 +812,8 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
* be used for junction temperature monitoring, it is desirable that the
* sensors are operational all the time, so that alerts are generated
* properly.
+ *
+ * Return: 0
*/
static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
{
@@ -814,6 +839,8 @@ static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
* to specify which GPIO line is used. TSHUT IRQ is fired anytime
* one of the bandgap sensors violates the TSHUT high/hot threshold.
* And in that case, the system must go off.
+ *
+ * Return: 0 if no error, else error status
*/
static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
struct platform_device *pdev)
@@ -853,6 +880,8 @@ static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
* TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
* are violated. In these situation, the driver must reprogram the thresholds,
* accordingly to specified policy.
+ *
+ * Return: 0 if no error, else return corresponding error.
*/
static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
struct platform_device *pdev)
@@ -884,6 +913,9 @@ static const struct of_device_id of_ti_bandgap_match[];
* Used to read the device tree properties accordingly to the bandgap
* matching version. Based on bandgap version and its capabilities it
* will build a struct ti_bandgap out of the required DT entries.
+ *
+ * Return: valid bandgap structure if successful, else returns ERR_PTR
+ * return value must be verified with IS_ERR.
*/
static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
{
--
Regards,
Nishanth Menon
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
2013-03-19 19:22 ` Nishanth Menon
@ 2013-03-20 11:56 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-20 11:56 UTC (permalink / raw)
To: Nishanth Menon; +Cc: gregkh, devel, linux-omap, linux-kernel, linux-pm
Hello Nishanth,
On 19-03-2013 15:22, Nishanth Menon wrote:
> On 10:54-20130319, Eduardo Valentin wrote:
<cut>
>> * @adc_start_val: ADC conversion table starting value
> You may still want to fix warnings generated by:
> ./scripts/kernel-doc -v drivers/staging/ti-soc-thermal/ti-bandgap.c>/dev/null
> For example - the following changes are required for proper error return
> documentation (following diff is just an hint):
Although I think the above is a good thing to be done, I don't think it
is considered mandatory, and for this reason, I don't believe the above
should block this patch. Basically because, after this patch, at least
kernel-doc runs successfully.
Besides, there is very few evidence that ppl out there care much about
"-v". A quick grep+awk would inform you this. If you consider the
population of C files (around 35.4K files) inside the tree (simple find
* | grep .*\\.[c,h]$ in your tree), only around 12.0% has structured
comments. Out of the files that have structured comments, only about
11.0% has 0 warnings (including 0 warnings with -v), that's something
like ~500 files. A considerable amount don't care about "-v" (34% out of
the files with structured comments). Actually most of them don't care
about warnings (89% out of the files with structured comments) at all. :-)
That said, I am going to send a separate patch to fix the "-v" later on.
Including your chunks below.
Thanks for reviewing.
>
> diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> index d479e50..0adae05 100644
> --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> @@ -50,7 +50,7 @@
> * @reg: desired register (offset) to be read
> *
> * Helper function to read bandgap registers. It uses the io remapped area.
> - * Returns the register value.
> + * Return: the register value.
> */
> static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
> {
> @@ -97,6 +97,8 @@ do { \
> *
> * Used to power on/off a bandgap device instance. Only used on those
> * that features tempsoff bit.
> + *
> + * Return: 0
> */
> static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
> {
> @@ -122,6 +124,8 @@ exit:
> * This function is desired because, depending on bandgap device version,
> * it might be needed to freeze the bandgap state machine, before fetching
> * the register value.
> + *
> + * Return: temperature in ...
> */
> static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
> {
> @@ -162,6 +166,8 @@ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
> * conditions and acts accordingly. In case there are events pending,
> * it will reset the event mask to wait for the opposite event (next event).
> * Every time there is a new event, it will be reported to thermal layer.
> + *
> + * Return: IRQ_HANDLED
> */
> static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
> {
> @@ -222,6 +228,8 @@ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
> * This is the Tshut handler. Use it only if bandgap device features
> * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
> * the system.
> + *
> + * Return: IRQ_HANDLED
> */
> static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
> {
> @@ -244,6 +252,8 @@ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
> * Simple conversion from ADC representation to mCelsius. In case the ADC value
> * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
> * The conversion table is indexed by the ADC values.
> + *
> + * Return: 0 if converstion was successful, else -ERANGE if out of range
> */
> static
> int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
> @@ -272,6 +282,8 @@ exit:
> * Simple conversion from mCelsius to ADC values. In case the temp value
> * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
> * The conversion table is indexed by the ADC values.
> + *
> + * Return: 0 if converstion was successful, else -ERANGE if out of range
> */
> static
> int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
> @@ -311,7 +323,8 @@ exit:
> * @sum: address where to write the resulting temperature (in ADC scale)
> *
> * Adds an hysteresis value (in mCelsius) to a ADC temperature value.
> - * Returns 0 on success, -ERANGE otherwise.
> + *
> + * Return: 0 on success, -ERANGE otherwise.
> */
> static
> int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
> @@ -384,6 +397,8 @@ static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
> * It checks the resulting t_hot and t_cold values, based on the new passed @val
> * and configures the thresholds so that t_hot is always greater than t_cold.
> * Call this function only if bandgap features HAS(TALERT).
> + *
> + * Return: 0 if no error, else corresponding error
> */
> static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
> int val, bool hot)
> @@ -442,6 +457,8 @@ exit:
> *
> * Checks if the bandgap pointer is valid and if the sensor id is also
> * applicable.
> + *
> + * Return: 0 if no errors, -EINVAL for bad parameter or -ERANGE if out of range
> */
> static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
> {
> @@ -475,6 +492,8 @@ exit:
> * This function can be used to update t_hot or t_cold, depending on @hot value.
> * Validates the mCelsius range and update the requested threshold.
> * Call this function only if bandgap features HAS(TALERT).
> + *
> + * Return: 0 if no error, else corresponding error value.
> */
> static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
> bool hot)
> @@ -529,6 +548,8 @@ exit:
> * It will fetch the required thresholds (hot and cold) for TALERT signal.
> * This function can be used to read t_hot or t_cold, depending on @hot value.
> * Call this function only if bandgap features HAS(TALERT).
> + *
> + * Return: 0 if no error, if it has no TALERT support, returns -ENOTSUPP....
> */
> static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
> int *val, bool hot)
> @@ -575,7 +596,7 @@ exit:
> * @id: sensor id
> * @thot: resulting current thot value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
> {
> @@ -588,7 +609,7 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
> * @id: sensor id
> * @val: desired thot value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
> {
> @@ -601,7 +622,7 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
> * @id: sensor id
> * @tcold: resulting current tcold value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
> {
> @@ -614,7 +635,7 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
> * @id: sensor id
> * @val: desired tcold value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
> {
> @@ -627,7 +648,7 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
> * @id: sensor id
> * @interval: resulting update interval in miliseconds
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
> int *interval)
> @@ -659,7 +680,7 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
> * @id: sensor id
> * @interval: desired update interval in miliseconds
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
> int id, u32 interval)
> @@ -685,7 +706,7 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
> * @id: sensor id
> * @temperature: resulting temperature
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
> int *temperature)
> @@ -717,7 +738,7 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
> * @id: sensor id
> * @data: thermal framework related data to be stored
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
> {
> @@ -736,7 +757,7 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
> * @bgp: pointer to bandgap instance
> * @id: sensor id
> *
> - * returns data stored by set function with sensor id on success or NULL
> + * Return: data stored by set function with sensor id on success or NULL
> */
> void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
> {
> @@ -756,6 +777,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
> *
> * Used to initialize the conversion state machine and set it to a valid
> * state. Called during device initialization and context restore events.
> + *
> + * Return: 0
> */
> static int
> ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
> @@ -789,6 +812,8 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
> * be used for junction temperature monitoring, it is desirable that the
> * sensors are operational all the time, so that alerts are generated
> * properly.
> + *
> + * Return: 0
> */
> static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
> {
> @@ -814,6 +839,8 @@ static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
> * to specify which GPIO line is used. TSHUT IRQ is fired anytime
> * one of the bandgap sensors violates the TSHUT high/hot threshold.
> * And in that case, the system must go off.
> + *
> + * Return: 0 if no error, else error status
> */
> static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
> struct platform_device *pdev)
> @@ -853,6 +880,8 @@ static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
> * TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
> * are violated. In these situation, the driver must reprogram the thresholds,
> * accordingly to specified policy.
> + *
> + * Return: 0 if no error, else return corresponding error.
> */
> static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
> struct platform_device *pdev)
> @@ -884,6 +913,9 @@ static const struct of_device_id of_ti_bandgap_match[];
> * Used to read the device tree properties accordingly to the bandgap
> * matching version. Based on bandgap version and its capabilities it
> * will build a struct ti_bandgap out of the required DT entries.
> + *
> + * Return: valid bandgap structure if successful, else returns ERR_PTR
> + * return value must be verified with IS_ERR.
> */
> static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> {
>
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
@ 2013-03-20 11:56 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-20 11:56 UTC (permalink / raw)
To: Nishanth Menon; +Cc: gregkh, devel, linux-omap, linux-kernel, linux-pm
Hello Nishanth,
On 19-03-2013 15:22, Nishanth Menon wrote:
> On 10:54-20130319, Eduardo Valentin wrote:
<cut>
>> * @adc_start_val: ADC conversion table starting value
> You may still want to fix warnings generated by:
> ./scripts/kernel-doc -v drivers/staging/ti-soc-thermal/ti-bandgap.c>/dev/null
> For example - the following changes are required for proper error return
> documentation (following diff is just an hint):
Although I think the above is a good thing to be done, I don't think it
is considered mandatory, and for this reason, I don't believe the above
should block this patch. Basically because, after this patch, at least
kernel-doc runs successfully.
Besides, there is very few evidence that ppl out there care much about
"-v". A quick grep+awk would inform you this. If you consider the
population of C files (around 35.4K files) inside the tree (simple find
* | grep .*\\.[c,h]$ in your tree), only around 12.0% has structured
comments. Out of the files that have structured comments, only about
11.0% has 0 warnings (including 0 warnings with -v), that's something
like ~500 files. A considerable amount don't care about "-v" (34% out of
the files with structured comments). Actually most of them don't care
about warnings (89% out of the files with structured comments) at all. :-)
That said, I am going to send a separate patch to fix the "-v" later on.
Including your chunks below.
Thanks for reviewing.
>
> diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> index d479e50..0adae05 100644
> --- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
> +++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
> @@ -50,7 +50,7 @@
> * @reg: desired register (offset) to be read
> *
> * Helper function to read bandgap registers. It uses the io remapped area.
> - * Returns the register value.
> + * Return: the register value.
> */
> static u32 ti_bandgap_readl(struct ti_bandgap *bgp, u32 reg)
> {
> @@ -97,6 +97,8 @@ do { \
> *
> * Used to power on/off a bandgap device instance. Only used on those
> * that features tempsoff bit.
> + *
> + * Return: 0
> */
> static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
> {
> @@ -122,6 +124,8 @@ exit:
> * This function is desired because, depending on bandgap device version,
> * it might be needed to freeze the bandgap state machine, before fetching
> * the register value.
> + *
> + * Return: temperature in ...
> */
> static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
> {
> @@ -162,6 +166,8 @@ static u32 ti_bandgap_read_temp(struct ti_bandgap *bgp, int id)
> * conditions and acts accordingly. In case there are events pending,
> * it will reset the event mask to wait for the opposite event (next event).
> * Every time there is a new event, it will be reported to thermal layer.
> + *
> + * Return: IRQ_HANDLED
> */
> static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
> {
> @@ -222,6 +228,8 @@ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
> * This is the Tshut handler. Use it only if bandgap device features
> * HAS(TSHUT). If any sensor fires the Tshut signal, we simply shutdown
> * the system.
> + *
> + * Return: IRQ_HANDLED
> */
> static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
> {
> @@ -244,6 +252,8 @@ static irqreturn_t ti_bandgap_tshut_irq_handler(int irq, void *data)
> * Simple conversion from ADC representation to mCelsius. In case the ADC value
> * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
> * The conversion table is indexed by the ADC values.
> + *
> + * Return: 0 if converstion was successful, else -ERANGE if out of range
> */
> static
> int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
> @@ -272,6 +282,8 @@ exit:
> * Simple conversion from mCelsius to ADC values. In case the temp value
> * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
> * The conversion table is indexed by the ADC values.
> + *
> + * Return: 0 if converstion was successful, else -ERANGE if out of range
> */
> static
> int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
> @@ -311,7 +323,8 @@ exit:
> * @sum: address where to write the resulting temperature (in ADC scale)
> *
> * Adds an hysteresis value (in mCelsius) to a ADC temperature value.
> - * Returns 0 on success, -ERANGE otherwise.
> + *
> + * Return: 0 on success, -ERANGE otherwise.
> */
> static
> int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
> @@ -384,6 +397,8 @@ static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
> * It checks the resulting t_hot and t_cold values, based on the new passed @val
> * and configures the thresholds so that t_hot is always greater than t_cold.
> * Call this function only if bandgap features HAS(TALERT).
> + *
> + * Return: 0 if no error, else corresponding error
> */
> static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
> int val, bool hot)
> @@ -442,6 +457,8 @@ exit:
> *
> * Checks if the bandgap pointer is valid and if the sensor id is also
> * applicable.
> + *
> + * Return: 0 if no errors, -EINVAL for bad parameter or -ERANGE if out of range
> */
> static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
> {
> @@ -475,6 +492,8 @@ exit:
> * This function can be used to update t_hot or t_cold, depending on @hot value.
> * Validates the mCelsius range and update the requested threshold.
> * Call this function only if bandgap features HAS(TALERT).
> + *
> + * Return: 0 if no error, else corresponding error value.
> */
> static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
> bool hot)
> @@ -529,6 +548,8 @@ exit:
> * It will fetch the required thresholds (hot and cold) for TALERT signal.
> * This function can be used to read t_hot or t_cold, depending on @hot value.
> * Call this function only if bandgap features HAS(TALERT).
> + *
> + * Return: 0 if no error, if it has no TALERT support, returns -ENOTSUPP....
> */
> static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
> int *val, bool hot)
> @@ -575,7 +596,7 @@ exit:
> * @id: sensor id
> * @thot: resulting current thot value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
> {
> @@ -588,7 +609,7 @@ int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
> * @id: sensor id
> * @val: desired thot value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
> {
> @@ -601,7 +622,7 @@ int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
> * @id: sensor id
> * @tcold: resulting current tcold value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
> {
> @@ -614,7 +635,7 @@ int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
> * @id: sensor id
> * @val: desired tcold value
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
> {
> @@ -627,7 +648,7 @@ int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
> * @id: sensor id
> * @interval: resulting update interval in miliseconds
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
> int *interval)
> @@ -659,7 +680,7 @@ int ti_bandgap_read_update_interval(struct ti_bandgap *bgp, int id,
> * @id: sensor id
> * @interval: desired update interval in miliseconds
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
> int id, u32 interval)
> @@ -685,7 +706,7 @@ int ti_bandgap_write_update_interval(struct ti_bandgap *bgp,
> * @id: sensor id
> * @temperature: resulting temperature
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
> int *temperature)
> @@ -717,7 +738,7 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
> * @id: sensor id
> * @data: thermal framework related data to be stored
> *
> - * returns 0 on success or the proper error code
> + * Return: 0 on success or the proper error code
> */
> int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
> {
> @@ -736,7 +757,7 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data)
> * @bgp: pointer to bandgap instance
> * @id: sensor id
> *
> - * returns data stored by set function with sensor id on success or NULL
> + * Return: data stored by set function with sensor id on success or NULL
> */
> void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
> {
> @@ -756,6 +777,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
> *
> * Used to initialize the conversion state machine and set it to a valid
> * state. Called during device initialization and context restore events.
> + *
> + * Return: 0
> */
> static int
> ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
> @@ -789,6 +812,8 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
> * be used for junction temperature monitoring, it is desirable that the
> * sensors are operational all the time, so that alerts are generated
> * properly.
> + *
> + * Return: 0
> */
> static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
> {
> @@ -814,6 +839,8 @@ static int ti_bandgap_set_continuous_mode(struct ti_bandgap *bgp)
> * to specify which GPIO line is used. TSHUT IRQ is fired anytime
> * one of the bandgap sensors violates the TSHUT high/hot threshold.
> * And in that case, the system must go off.
> + *
> + * Return: 0 if no error, else error status
> */
> static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
> struct platform_device *pdev)
> @@ -853,6 +880,8 @@ static int ti_bandgap_tshut_init(struct ti_bandgap *bgp,
> * TALERT is a normal IRQ and it is fired any time thresholds (hot or cold)
> * are violated. In these situation, the driver must reprogram the thresholds,
> * accordingly to specified policy.
> + *
> + * Return: 0 if no error, else return corresponding error.
> */
> static int ti_bandgap_talert_init(struct ti_bandgap *bgp,
> struct platform_device *pdev)
> @@ -884,6 +913,9 @@ static const struct of_device_id of_ti_bandgap_match[];
> * Used to read the device tree properties accordingly to the bandgap
> * matching version. Based on bandgap version and its capabilities it
> * will build a struct ti_bandgap out of the required DT entries.
> + *
> + * Return: valid bandgap structure if successful, else returns ERR_PTR
> + * return value must be verified with IS_ERR.
> */
> static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
> {
>
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
2013-03-20 11:56 ` Eduardo Valentin
(?)
@ 2013-03-20 12:50 ` Nishanth Menon
-1 siblings, 0 replies; 35+ messages in thread
From: Nishanth Menon @ 2013-03-20 12:50 UTC (permalink / raw)
To: Eduardo Valentin; +Cc: devel, gregkh, linux-omap, linux-kernel, linux-pm
On Wed, Mar 20, 2013 at 6:56 AM, Eduardo Valentin
<eduardo.valentin@ti.com> wrote:
> On 19-03-2013 15:22, Nishanth Menon wrote:
>>
>> On 10:54-20130319, Eduardo Valentin wrote:
[..]
>> You may still want to fix warnings generated by:
>> ./scripts/kernel-doc -v
>> drivers/staging/ti-soc-thermal/ti-bandgap.c>/dev/null
>> For example - the following changes are required for proper error return
>> documentation (following diff is just an hint):
>
>
> Although I think the above is a good thing to be done, I don't think it is
> considered mandatory, and for this reason, I don't believe the above should
> block this patch. Basically because, after this patch, at least kernel-doc
> runs successfully.
>
> Besides, there is very few evidence that ppl out there care much about "-v".
> A quick grep+awk would inform you this. If you consider the population of C
> files (around 35.4K files) inside the tree (simple find * | grep .*\\.[c,h]$
> in your tree), only around 12.0% has structured comments. Out of the files
> that have structured comments, only about 11.0% has 0 warnings (including 0
> warnings with -v), that's something like ~500 files. A considerable amount
> don't care about "-v" (34% out of the files with structured comments).
> Actually most of them don't care about warnings (89% out of the files with
> structured comments) at all. :-)
Yep, commit 4092bac7
>
> That said, I am going to send a separate patch to fix the "-v" later on.
> Including your chunks below.
Thanks.
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
2013-03-19 14:54 ` Eduardo Valentin
(?)
(?)
@ 2013-03-25 18:22 ` Greg KH
2013-03-26 0:24 ` Eduardo Valentin
-1 siblings, 1 reply; 35+ messages in thread
From: Greg KH @ 2013-03-25 18:22 UTC (permalink / raw)
To: Eduardo Valentin
Cc: devel, Nishanth Menon, linux-pm, linux-kernel, linux-omap
On Tue, Mar 19, 2013 at 10:54:25AM -0400, Eduardo Valentin wrote:
> This patch updates the documentation to remove
> all warnings and errors reported by scripts/kernel-doc.
> Most are missing arguments due to wrong format.
>
> Cc: Nishanth Menon <nm@ti.com>
>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
In the future, don't put empty lines between the Cc: and signed-off-by:
lines please, I had to hand-edit all of these to fix that...
greg k-h
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
2013-03-25 18:22 ` Greg KH
@ 2013-03-26 0:24 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-26 0:24 UTC (permalink / raw)
To: Greg KH; +Cc: devel, Nishanth Menon, linux-pm, linux-kernel, linux-omap
On 25-03-2013 14:22, Greg KH wrote:
> On Tue, Mar 19, 2013 at 10:54:25AM -0400, Eduardo Valentin wrote:
>> This patch updates the documentation to remove
>> all warnings and errors reported by scripts/kernel-doc.
>> Most are missing arguments due to wrong format.
>>
>> Cc: Nishanth Menon <nm@ti.com>
>>
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>
> In the future, don't put empty lines between the Cc: and signed-off-by:
> lines please, I had to hand-edit all of these to fix that...
Ok. Sure.. My bad..
>
> greg k-h
>
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCHv2 09/12] staging: ti-soc-thermal: fix several kernel-doc warnings and error
@ 2013-03-26 0:24 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-26 0:24 UTC (permalink / raw)
To: Greg KH; +Cc: devel, Nishanth Menon, linux-pm, linux-kernel, linux-omap
On 25-03-2013 14:22, Greg KH wrote:
> On Tue, Mar 19, 2013 at 10:54:25AM -0400, Eduardo Valentin wrote:
>> This patch updates the documentation to remove
>> all warnings and errors reported by scripts/kernel-doc.
>> Most are missing arguments due to wrong format.
>>
>> Cc: Nishanth Menon <nm@ti.com>
>>
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
>
> In the future, don't put empty lines between the Cc: and signed-off-by:
> lines please, I had to hand-edit all of these to fix that...
Ok. Sure.. My bad..
>
> greg k-h
>
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCHv2 10/12] staging: ti-soc-thermal: fix condition to apply hyst
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
While updating talert thresholds, threshold cold must
always be lower than threshold hot. This patch fixes
the function ti_bandgap_update_alert_threshold to only
change the thresholds by applying a hysteresis when
they violate this condition.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index a9d6d2a..d075186 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -406,7 +406,7 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
else
t_cold = val;
- if (t_cold < t_hot) {
+ if (t_cold > t_hot) {
if (hot)
err = ti_bandgap_add_hyst(bgp, t_hot,
-ts_data->hyst_val,
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 10/12] staging: ti-soc-thermal: fix condition to apply hyst
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
While updating talert thresholds, threshold cold must
always be lower than threshold hot. This patch fixes
the function ti_bandgap_update_alert_threshold to only
change the thresholds by applying a hysteresis when
they violate this condition.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index a9d6d2a..d075186 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -406,7 +406,7 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
else
t_cold = val;
- if (t_cold < t_hot) {
+ if (t_cold > t_hot) {
if (hot)
err = ti_bandgap_add_hyst(bgp, t_hot,
-ts_data->hyst_val,
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 11/12] staging: ti-soc-thermal: fix bitfield writing while updating thresholds
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Wrong threshold cold values may be written with current implementation.
This patch fixes the threshold update function by simplifying the
bitfield manipulation sequence.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index d075186..5c946cd 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -418,10 +418,10 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
}
/* write the new threshold values */
- reg_val = thresh_val & ~tsr->threshold_thot_mask;
- reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask));
- reg_val |= thresh_val & ~tsr->threshold_tcold_mask;
- reg_val |= (t_cold << __ffs(tsr->threshold_tcold_mask));
+ reg_val = thresh_val &
+ ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask);
+ reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) |
+ (t_cold << __ffs(tsr->threshold_tcold_mask));
ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
if (err) {
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread* [PATCHv2 11/12] staging: ti-soc-thermal: fix bitfield writing while updating thresholds
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
Wrong threshold cold values may be written with current implementation.
This patch fixes the threshold update function by simplifying the
bitfield manipulation sequence.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index d075186..5c946cd 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -418,10 +418,10 @@ static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
}
/* write the new threshold values */
- reg_val = thresh_val & ~tsr->threshold_thot_mask;
- reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask));
- reg_val |= thresh_val & ~tsr->threshold_tcold_mask;
- reg_val |= (t_cold << __ffs(tsr->threshold_tcold_mask));
+ reg_val = thresh_val &
+ ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask);
+ reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) |
+ (t_cold << __ffs(tsr->threshold_tcold_mask));
ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
if (err) {
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 12/12] staging: ti-soc-thermal: propagate error code
2013-03-19 14:54 ` Eduardo Valentin
@ 2013-03-19 14:54 ` Eduardo Valentin
-1 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
While writing talert thresholds, propagate the error code from
ti_bandgap_update_alert_threshold to the caller of
_ti_bandgap_write_threshold.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 5c946cd..d479e50 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -511,7 +511,7 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
goto exit;
spin_lock(&bgp->lock);
- ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
+ ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
spin_unlock(&bgp->lock);
exit:
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCHv2 12/12] staging: ti-soc-thermal: propagate error code
@ 2013-03-19 14:54 ` Eduardo Valentin
0 siblings, 0 replies; 35+ messages in thread
From: Eduardo Valentin @ 2013-03-19 14:54 UTC (permalink / raw)
To: gregkh; +Cc: devel, linux-omap, linux-kernel, linux-pm, Eduardo Valentin
While writing talert thresholds, propagate the error code from
ti_bandgap_update_alert_threshold to the caller of
_ti_bandgap_write_threshold.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/staging/ti-soc-thermal/ti-bandgap.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/ti-soc-thermal/ti-bandgap.c b/drivers/staging/ti-soc-thermal/ti-bandgap.c
index 5c946cd..d479e50 100644
--- a/drivers/staging/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/staging/ti-soc-thermal/ti-bandgap.c
@@ -511,7 +511,7 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
goto exit;
spin_lock(&bgp->lock);
- ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
+ ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
spin_unlock(&bgp->lock);
exit:
--
1.7.7.1.488.ge8e1c
^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCHv2 00/12] staging: [omap,ti-soc]-thermal: fixes and renaming
2013-03-19 14:54 ` Eduardo Valentin
` (12 preceding siblings ...)
(?)
@ 2013-03-20 9:15 ` Dan Carpenter
-1 siblings, 0 replies; 35+ messages in thread
From: Dan Carpenter @ 2013-03-20 9:15 UTC (permalink / raw)
To: Eduardo Valentin; +Cc: gregkh, devel, linux-omap, linux-kernel, linux-pm
These look nice. Thanks for breaking up the move and api rename
into separate patches.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 35+ messages in thread