All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: Saravana Kannan <skannan@codeaurora.org>,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 12/14] ARM: dts: msm: Add MSM8960 MMCC DT nodes
Date: Wed, 24 Jul 2013 17:43:40 -0700	[thread overview]
Message-ID: <1374713022-6049-13-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1374713022-6049-1-git-send-email-sboyd@codeaurora.org>

Add the necessary DT data to probe the multimedia clock controller
on MSM8960 devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm/boot/dts/msm8960-cdp.dts | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
index 76a1817..be8d947 100644
--- a/arch/arm/boot/dts/msm8960-cdp.dts
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -109,6 +109,43 @@
 		};
 	};
 
+	clock-controller@4000000 {
+		compatible = "qcom,mmcc-8960", "qcom,mmcc";
+		reg = <0x4000000 0x1000>;
+
+		clocks {
+			pll2: pll2 {
+				#clock-cells = <0>;
+				compatible = "qcom,pll";
+				clocks = <&pxo>;
+			};
+
+			mdp_rcg: mdp_rcg {
+				#clock-cells = <0>;
+				compatible = "qcom,mn8-dyn-clock";
+				clocks = <&pxo>, <&pll2>, <&vpll8>;
+			};
+
+			mdp_cxc: mdp_cxc {
+				#clock-cells = <0>;
+				compatible = "qcom,cxc-clock";
+				clocks = <&mdp_rcg>;
+			};
+
+			rot_rcg: rot_rcg {
+				#clock-cells = <0>;
+				compatible = "qcom,p4-dyn-clock";
+				clocks = <&pxo>, <&pll2>, <&vpll8>;
+			};
+
+			rot_cxc: rot_cxc {
+				#clock-cells = <0>;
+				compatible = "qcom,cxc-clock";
+				clocks = <&rot_rcg>;
+			};
+		};
+	};
+
 	serial@16440000 {
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x16440000 0x1000>,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 12/14] ARM: dts: msm: Add MSM8960 MMCC DT nodes
Date: Wed, 24 Jul 2013 17:43:40 -0700	[thread overview]
Message-ID: <1374713022-6049-13-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1374713022-6049-1-git-send-email-sboyd@codeaurora.org>

Add the necessary DT data to probe the multimedia clock controller
on MSM8960 devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm/boot/dts/msm8960-cdp.dts | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
index 76a1817..be8d947 100644
--- a/arch/arm/boot/dts/msm8960-cdp.dts
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -109,6 +109,43 @@
 		};
 	};
 
+	clock-controller at 4000000 {
+		compatible = "qcom,mmcc-8960", "qcom,mmcc";
+		reg = <0x4000000 0x1000>;
+
+		clocks {
+			pll2: pll2 {
+				#clock-cells = <0>;
+				compatible = "qcom,pll";
+				clocks = <&pxo>;
+			};
+
+			mdp_rcg: mdp_rcg {
+				#clock-cells = <0>;
+				compatible = "qcom,mn8-dyn-clock";
+				clocks = <&pxo>, <&pll2>, <&vpll8>;
+			};
+
+			mdp_cxc: mdp_cxc {
+				#clock-cells = <0>;
+				compatible = "qcom,cxc-clock";
+				clocks = <&mdp_rcg>;
+			};
+
+			rot_rcg: rot_rcg {
+				#clock-cells = <0>;
+				compatible = "qcom,p4-dyn-clock";
+				clocks = <&pxo>, <&pll2>, <&vpll8>;
+			};
+
+			rot_cxc: rot_cxc {
+				#clock-cells = <0>;
+				compatible = "qcom,cxc-clock";
+				clocks = <&rot_rcg>;
+			};
+		};
+	};
+
 	serial at 16440000 {
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x16440000 0x1000>,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2013-07-25  0:43 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-25  0:43 [PATCH v1 00/14] Add support for MSM's mmio clocks Stephen Boyd
2013-07-25  0:43 ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 01/14] clk: fixed-rate: Export clk_fixed_rate_register() Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-08-03  3:32   ` Mike Turquette
2013-08-03  3:32     ` Mike Turquette
2013-07-25  0:43 ` [PATCH v1 02/14] clk: Add of_init_clk_data() to parse common clock bindings Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:21   ` Tomasz Figa
2013-07-25  8:21     ` Tomasz Figa
2013-07-25 16:36     ` Stephen Boyd
2013-07-25 16:36       ` Stephen Boyd
2013-08-03  1:06       ` Mike Turquette
2013-08-03  1:06         ` Mike Turquette
2013-07-25  0:43 ` [PATCH v1 03/14] clk: Add of_clk_match() for device drivers Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:12   ` Tomasz Figa
2013-07-25  8:12     ` Tomasz Figa
2013-07-25 16:36     ` Stephen Boyd
2013-07-25 16:36       ` Stephen Boyd
2013-08-12 20:23   ` Mike Turquette
2013-08-12 20:23     ` Mike Turquette
2013-08-13  5:48     ` Stephen Boyd
2013-08-13  5:48       ` Stephen Boyd
2013-08-15  5:02       ` Mike Turquette
2013-08-15  5:02         ` Mike Turquette
2013-08-16  1:31         ` Stephen Boyd
2013-08-16  1:31           ` Stephen Boyd
2013-08-16  3:44           ` Mike Turquette
2013-08-16  3:44             ` Mike Turquette
2013-08-16 16:43         ` Kumar Gala
2013-08-16 16:43           ` Kumar Gala
2013-08-16 17:16           ` Kumar Gala
2013-08-16 17:16             ` Kumar Gala
2013-07-25  0:43 ` [PATCH v1 04/14] clk: Add set_rate_and_parent() op Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:26   ` Tomasz Figa
2013-07-25  8:26     ` Tomasz Figa
2013-07-25  8:26     ` Tomasz Figa
2013-07-25 16:45     ` Stephen Boyd
2013-07-25 16:45       ` Stephen Boyd
2013-08-09  5:32       ` Mike Turquette
2013-08-09  5:32         ` Mike Turquette
2013-08-09  9:11   ` James Hogan
2013-08-09  9:11     ` James Hogan
2013-08-09  9:11     ` James Hogan
2013-07-25  0:43 ` [PATCH v1 05/14] clk: msm: Add support for phase locked loops (PLLs) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:29   ` Tomasz Figa
2013-07-25  8:29     ` Tomasz Figa
2013-07-25 16:37     ` Stephen Boyd
2013-07-25 16:37       ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 06/14] clk: msm: Add support for root clock generators (RCGs) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 07/14] clk: msm: Add support for branches/gate clocks Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 08/14] clk: msm: Add MSM clock driver Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:32   ` Tomasz Figa
2013-07-25  8:32     ` Tomasz Figa
2013-07-25 16:40     ` Stephen Boyd
2013-07-25 16:40       ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 09/14] clk: msm: Add support for MSM8960's global clock controller (GCC) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-08-08 17:00   ` Mark Rutland
2013-08-08 17:00     ` Mark Rutland
2013-08-08 17:00     ` Mark Rutland
2013-08-13  5:03     ` Stephen Boyd
2013-08-13  5:03       ` Stephen Boyd
2013-08-13  5:03       ` Stephen Boyd
2013-08-13 14:24       ` Mike Turquette
2013-08-13 14:24         ` Mike Turquette
2013-08-13 14:24         ` Mike Turquette
2013-08-13 18:42         ` Stephen Boyd
2013-08-13 18:42           ` Stephen Boyd
2013-08-13 18:42           ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 10/14] clk: msm: Add support for MSM8960's multimedia clock controller (MMCC) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-08-08 17:02   ` Mark Rutland
2013-08-08 17:02     ` Mark Rutland
2013-08-08 17:02     ` Mark Rutland
2013-07-25  0:43 ` [PATCH v1 11/14] ARM: dts: msm: Add MSM8960 GCC DT nodes Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` Stephen Boyd [this message]
2013-07-25  0:43   ` [PATCH v1 12/14] ARM: dts: msm: Add MSM8960 MMCC " Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 13/14] clk: msm: Add MSM8974 GCC data Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 14/14] ARM: dts: msm: Add clock entries for MSM8960 uart device Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1374713022-6049-13-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=skannan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.