All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: Mike Turquette <mturquette@linaro.org>
Cc: Saravana Kannan <skannan@codeaurora.org>,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	James Hogan <james.hogan@imgtec.com>
Subject: [PATCH v1 04/14] clk: Add set_rate_and_parent() op
Date: Wed, 24 Jul 2013 17:43:32 -0700	[thread overview]
Message-ID: <1374713022-6049-5-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1374713022-6049-1-git-send-email-sboyd@codeaurora.org>

Some of Qualcomm's clocks can change their parent and rate at the
same time with a single register write. Add support for this
hardware to the common clock framework by adding a new
set_rate_and_parent() op. When the clock framework determines
that both the parent and the rate are going to change during
clk_set_rate() it will call the .set_rate_and_parent() op if
available and fall back to calling .set_parent() followed by
.set_rate() otherwise.

Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/clk.txt        |  3 ++
 drivers/clk/clk.c            | 78 +++++++++++++++++++++++++++++++++-----------
 include/linux/clk-provider.h | 15 +++++++++
 3 files changed, 77 insertions(+), 19 deletions(-)

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 3aeb5c4..79700ea 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -77,6 +77,9 @@ the operations defined in clk.h:
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate_and_parent)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate, u8 index);
 		void		(*init)(struct clk_hw *hw);
 	};
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1e3e0db..73de07c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1121,10 +1121,9 @@ static void clk_reparent(struct clk *clk, struct clk *new_parent)
 	clk->parent = new_parent;
 }
 
-static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+static struct clk *__clk_set_parent_before(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
-	int ret = 0;
 	struct clk *old_parent = clk->parent;
 
 	/*
@@ -1155,6 +1154,34 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 	clk_reparent(clk, parent);
 	clk_enable_unlock(flags);
 
+	return old_parent;
+}
+
+static void __clk_set_parent_after(struct clk *clk, struct clk *parent,
+		struct clk *old_parent)
+{
+	/*
+	 * Finish the migration of prepare state and undo the changes done
+	 * for preventing a race with clk_enable().
+	 */
+	if (clk->prepare_count) {
+		clk_disable(clk);
+		clk_disable(old_parent);
+		__clk_unprepare(old_parent);
+	}
+
+	/* update debugfs with new clk tree topology */
+	clk_debug_reparent(clk, parent);
+}
+
+static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+{
+	unsigned long flags;
+	int ret = 0;
+	struct clk *old_parent;
+
+	old_parent = __clk_set_parent_before(clk, parent);
+
 	/* change clock input source */
 	if (parent && clk->ops->set_parent)
 		ret = clk->ops->set_parent(clk->hw, p_index);
@@ -1172,18 +1199,8 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 		return ret;
 	}
 
-	/*
-	 * Finish the migration of prepare state and undo the changes done
-	 * for preventing a race with clk_enable().
-	 */
-	if (clk->prepare_count) {
-		clk_disable(clk);
-		clk_disable(old_parent);
-		__clk_unprepare(old_parent);
-	}
+	__clk_set_parent_after(clk, parent, old_parent);
 
-	/* update debugfs with new clk tree topology */
-	clk_debug_reparent(clk, parent);
 	return 0;
 }
 
@@ -1368,17 +1385,32 @@ static void clk_change_rate(struct clk *clk)
 	struct clk *child;
 	unsigned long old_rate;
 	unsigned long best_parent_rate = 0;
+	bool skip_set_rate = false;
+	struct clk *old_parent;
 
 	old_rate = clk->rate;
 
-	/* set parent */
-	if (clk->new_parent && clk->new_parent != clk->parent)
-		__clk_set_parent(clk, clk->new_parent, clk->new_parent_index);
-
-	if (clk->parent)
+	if (clk->new_parent)
+		best_parent_rate = clk->new_parent->rate;
+	else if (clk->parent)
 		best_parent_rate = clk->parent->rate;
 
-	if (clk->ops->set_rate)
+	if (clk->new_parent && clk->new_parent != clk->parent) {
+		old_parent = __clk_set_parent_before(clk, clk->new_parent);
+
+		if (clk->ops->set_rate_and_parent) {
+			skip_set_rate = true;
+			clk->ops->set_rate_and_parent(clk->hw, clk->new_rate,
+					best_parent_rate,
+					clk->new_parent_index);
+		} else if (clk->ops->set_parent) {
+			clk->ops->set_parent(clk->hw, clk->new_parent_index);
+		}
+
+		__clk_set_parent_after(clk, clk->new_parent, old_parent);
+	}
+
+	if (!skip_set_rate && clk->ops->set_rate)
 		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
 
 	if (clk->ops->recalc_rate)
@@ -1664,6 +1696,14 @@ int __clk_init(struct device *dev, struct clk *clk)
 		goto out;
 	}
 
+	if (clk->ops->set_rate_and_parent &&
+			!(clk->ops->set_parent && clk->ops->set_rate)) {
+		pr_warning("%s: %s must implement .set_parent & .set_rate\n",
+				__func__, clk->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* throw a WARN if any entries in parent_names are NULL */
 	for (i = 0; i < clk->num_parents; i++)
 		WARN(!clk->parent_names[i],
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 484f8ad..1f7eabb 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -108,6 +108,18 @@ struct clk_hw;
  *		which is likely helpful for most .set_rate implementation.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @set_rate_and_parent: Change the rate and the parent of this clock. The
+ *		requested rate is specified by the second argument, which
+ *		should typically be the return of .round_rate call.  The
+ *		third argument gives the parent rate which is likely helpful
+ *		for most .set_rate_and_parent implementation. The fourth
+ *		argument gives the parent index. It is optional (and
+ *		unnecessary) for clocks with 0 or 1 parents as well as
+ *		for clocks that can tolerate switching the rate and the parent
+ *		separately via calls to .set_parent and .set_rate.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
+ *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
  * (prepare) contexts.  If enabling a clock requires code that might sleep,
@@ -139,6 +151,9 @@ struct clk_ops {
 	u8		(*get_parent)(struct clk_hw *hw);
 	int		(*set_rate)(struct clk_hw *hw, unsigned long,
 				    unsigned long);
+	int		(*set_rate_and_parent)(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate, u8 index);
 	void		(*init)(struct clk_hw *hw);
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 04/14] clk: Add set_rate_and_parent() op
Date: Wed, 24 Jul 2013 17:43:32 -0700	[thread overview]
Message-ID: <1374713022-6049-5-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1374713022-6049-1-git-send-email-sboyd@codeaurora.org>

Some of Qualcomm's clocks can change their parent and rate at the
same time with a single register write. Add support for this
hardware to the common clock framework by adding a new
set_rate_and_parent() op. When the clock framework determines
that both the parent and the rate are going to change during
clk_set_rate() it will call the .set_rate_and_parent() op if
available and fall back to calling .set_parent() followed by
.set_rate() otherwise.

Cc: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
 Documentation/clk.txt        |  3 ++
 drivers/clk/clk.c            | 78 +++++++++++++++++++++++++++++++++-----------
 include/linux/clk-provider.h | 15 +++++++++
 3 files changed, 77 insertions(+), 19 deletions(-)

diff --git a/Documentation/clk.txt b/Documentation/clk.txt
index 3aeb5c4..79700ea 100644
--- a/Documentation/clk.txt
+++ b/Documentation/clk.txt
@@ -77,6 +77,9 @@ the operations defined in clk.h:
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
+		int		(*set_rate_and_parent)(struct clk_hw *hw,
+					    unsigned long rate,
+					    unsigned long parent_rate, u8 index);
 		void		(*init)(struct clk_hw *hw);
 	};
 
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1e3e0db..73de07c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1121,10 +1121,9 @@ static void clk_reparent(struct clk *clk, struct clk *new_parent)
 	clk->parent = new_parent;
 }
 
-static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+static struct clk *__clk_set_parent_before(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
-	int ret = 0;
 	struct clk *old_parent = clk->parent;
 
 	/*
@@ -1155,6 +1154,34 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 	clk_reparent(clk, parent);
 	clk_enable_unlock(flags);
 
+	return old_parent;
+}
+
+static void __clk_set_parent_after(struct clk *clk, struct clk *parent,
+		struct clk *old_parent)
+{
+	/*
+	 * Finish the migration of prepare state and undo the changes done
+	 * for preventing a race with clk_enable().
+	 */
+	if (clk->prepare_count) {
+		clk_disable(clk);
+		clk_disable(old_parent);
+		__clk_unprepare(old_parent);
+	}
+
+	/* update debugfs with new clk tree topology */
+	clk_debug_reparent(clk, parent);
+}
+
+static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
+{
+	unsigned long flags;
+	int ret = 0;
+	struct clk *old_parent;
+
+	old_parent = __clk_set_parent_before(clk, parent);
+
 	/* change clock input source */
 	if (parent && clk->ops->set_parent)
 		ret = clk->ops->set_parent(clk->hw, p_index);
@@ -1172,18 +1199,8 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent, u8 p_index)
 		return ret;
 	}
 
-	/*
-	 * Finish the migration of prepare state and undo the changes done
-	 * for preventing a race with clk_enable().
-	 */
-	if (clk->prepare_count) {
-		clk_disable(clk);
-		clk_disable(old_parent);
-		__clk_unprepare(old_parent);
-	}
+	__clk_set_parent_after(clk, parent, old_parent);
 
-	/* update debugfs with new clk tree topology */
-	clk_debug_reparent(clk, parent);
 	return 0;
 }
 
@@ -1368,17 +1385,32 @@ static void clk_change_rate(struct clk *clk)
 	struct clk *child;
 	unsigned long old_rate;
 	unsigned long best_parent_rate = 0;
+	bool skip_set_rate = false;
+	struct clk *old_parent;
 
 	old_rate = clk->rate;
 
-	/* set parent */
-	if (clk->new_parent && clk->new_parent != clk->parent)
-		__clk_set_parent(clk, clk->new_parent, clk->new_parent_index);
-
-	if (clk->parent)
+	if (clk->new_parent)
+		best_parent_rate = clk->new_parent->rate;
+	else if (clk->parent)
 		best_parent_rate = clk->parent->rate;
 
-	if (clk->ops->set_rate)
+	if (clk->new_parent && clk->new_parent != clk->parent) {
+		old_parent = __clk_set_parent_before(clk, clk->new_parent);
+
+		if (clk->ops->set_rate_and_parent) {
+			skip_set_rate = true;
+			clk->ops->set_rate_and_parent(clk->hw, clk->new_rate,
+					best_parent_rate,
+					clk->new_parent_index);
+		} else if (clk->ops->set_parent) {
+			clk->ops->set_parent(clk->hw, clk->new_parent_index);
+		}
+
+		__clk_set_parent_after(clk, clk->new_parent, old_parent);
+	}
+
+	if (!skip_set_rate && clk->ops->set_rate)
 		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
 
 	if (clk->ops->recalc_rate)
@@ -1664,6 +1696,14 @@ int __clk_init(struct device *dev, struct clk *clk)
 		goto out;
 	}
 
+	if (clk->ops->set_rate_and_parent &&
+			!(clk->ops->set_parent && clk->ops->set_rate)) {
+		pr_warning("%s: %s must implement .set_parent & .set_rate\n",
+				__func__, clk->name);
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* throw a WARN if any entries in parent_names are NULL */
 	for (i = 0; i < clk->num_parents; i++)
 		WARN(!clk->parent_names[i],
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 484f8ad..1f7eabb 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -108,6 +108,18 @@ struct clk_hw;
  *		which is likely helpful for most .set_rate implementation.
  *		Returns 0 on success, -EERROR otherwise.
  *
+ * @set_rate_and_parent: Change the rate and the parent of this clock. The
+ *		requested rate is specified by the second argument, which
+ *		should typically be the return of .round_rate call.  The
+ *		third argument gives the parent rate which is likely helpful
+ *		for most .set_rate_and_parent implementation. The fourth
+ *		argument gives the parent index. It is optional (and
+ *		unnecessary) for clocks with 0 or 1 parents as well as
+ *		for clocks that can tolerate switching the rate and the parent
+ *		separately via calls to .set_parent and .set_rate.
+ *		Returns 0 on success, -EERROR otherwise.
+ *
+ *
  * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow
  * implementations to split any work between atomic (enable) and sleepable
  * (prepare) contexts.  If enabling a clock requires code that might sleep,
@@ -139,6 +151,9 @@ struct clk_ops {
 	u8		(*get_parent)(struct clk_hw *hw);
 	int		(*set_rate)(struct clk_hw *hw, unsigned long,
 				    unsigned long);
+	int		(*set_rate_and_parent)(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate, u8 index);
 	void		(*init)(struct clk_hw *hw);
 };
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

  parent reply	other threads:[~2013-07-25  0:43 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-25  0:43 [PATCH v1 00/14] Add support for MSM's mmio clocks Stephen Boyd
2013-07-25  0:43 ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 01/14] clk: fixed-rate: Export clk_fixed_rate_register() Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-08-03  3:32   ` Mike Turquette
2013-08-03  3:32     ` Mike Turquette
2013-07-25  0:43 ` [PATCH v1 02/14] clk: Add of_init_clk_data() to parse common clock bindings Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:21   ` Tomasz Figa
2013-07-25  8:21     ` Tomasz Figa
2013-07-25 16:36     ` Stephen Boyd
2013-07-25 16:36       ` Stephen Boyd
2013-08-03  1:06       ` Mike Turquette
2013-08-03  1:06         ` Mike Turquette
2013-07-25  0:43 ` [PATCH v1 03/14] clk: Add of_clk_match() for device drivers Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:12   ` Tomasz Figa
2013-07-25  8:12     ` Tomasz Figa
2013-07-25 16:36     ` Stephen Boyd
2013-07-25 16:36       ` Stephen Boyd
2013-08-12 20:23   ` Mike Turquette
2013-08-12 20:23     ` Mike Turquette
2013-08-13  5:48     ` Stephen Boyd
2013-08-13  5:48       ` Stephen Boyd
2013-08-15  5:02       ` Mike Turquette
2013-08-15  5:02         ` Mike Turquette
2013-08-16  1:31         ` Stephen Boyd
2013-08-16  1:31           ` Stephen Boyd
2013-08-16  3:44           ` Mike Turquette
2013-08-16  3:44             ` Mike Turquette
2013-08-16 16:43         ` Kumar Gala
2013-08-16 16:43           ` Kumar Gala
2013-08-16 17:16           ` Kumar Gala
2013-08-16 17:16             ` Kumar Gala
2013-07-25  0:43 ` Stephen Boyd [this message]
2013-07-25  0:43   ` [PATCH v1 04/14] clk: Add set_rate_and_parent() op Stephen Boyd
2013-07-25  8:26   ` Tomasz Figa
2013-07-25  8:26     ` Tomasz Figa
2013-07-25  8:26     ` Tomasz Figa
2013-07-25 16:45     ` Stephen Boyd
2013-07-25 16:45       ` Stephen Boyd
2013-08-09  5:32       ` Mike Turquette
2013-08-09  5:32         ` Mike Turquette
2013-08-09  9:11   ` James Hogan
2013-08-09  9:11     ` James Hogan
2013-08-09  9:11     ` James Hogan
2013-07-25  0:43 ` [PATCH v1 05/14] clk: msm: Add support for phase locked loops (PLLs) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:29   ` Tomasz Figa
2013-07-25  8:29     ` Tomasz Figa
2013-07-25 16:37     ` Stephen Boyd
2013-07-25 16:37       ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 06/14] clk: msm: Add support for root clock generators (RCGs) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 07/14] clk: msm: Add support for branches/gate clocks Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 08/14] clk: msm: Add MSM clock driver Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  8:32   ` Tomasz Figa
2013-07-25  8:32     ` Tomasz Figa
2013-07-25 16:40     ` Stephen Boyd
2013-07-25 16:40       ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 09/14] clk: msm: Add support for MSM8960's global clock controller (GCC) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-08-08 17:00   ` Mark Rutland
2013-08-08 17:00     ` Mark Rutland
2013-08-08 17:00     ` Mark Rutland
2013-08-13  5:03     ` Stephen Boyd
2013-08-13  5:03       ` Stephen Boyd
2013-08-13  5:03       ` Stephen Boyd
2013-08-13 14:24       ` Mike Turquette
2013-08-13 14:24         ` Mike Turquette
2013-08-13 14:24         ` Mike Turquette
2013-08-13 18:42         ` Stephen Boyd
2013-08-13 18:42           ` Stephen Boyd
2013-08-13 18:42           ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 10/14] clk: msm: Add support for MSM8960's multimedia clock controller (MMCC) Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-08-08 17:02   ` Mark Rutland
2013-08-08 17:02     ` Mark Rutland
2013-08-08 17:02     ` Mark Rutland
2013-07-25  0:43 ` [PATCH v1 11/14] ARM: dts: msm: Add MSM8960 GCC DT nodes Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 12/14] ARM: dts: msm: Add MSM8960 MMCC " Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 13/14] clk: msm: Add MSM8974 GCC data Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd
2013-07-25  0:43 ` [PATCH v1 14/14] ARM: dts: msm: Add clock entries for MSM8960 uart device Stephen Boyd
2013-07-25  0:43   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1374713022-6049-5-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=james.hogan@imgtec.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=skannan@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.