* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel, Jean-Jacques Hiblot
Hi,
this patch serie implements a simple DRM driver for the ATMEL High end LCD
controller found in the SAMA5 familly. It's based on the tilcdc driver.
It uses the cma_helper for memory and fbdev stuff.
Your comments are welcome !
Supported features:
* the base layer (the main framebuffer)
* a simple panel
* a backlight driver
* structure to 'easily' add other connectors (it comes from the tilcdc)
On the todo list:
* support overlays as drm_planes
* support for the hardware cursor
* support for the SiI9022 HDMI connector (present on sama5d36ek)
Jean-Jacques Hiblot (3):
atmel: drm: added drm driver for the atmel hlcd controller
atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
atmel: dt: Add supports for the lcdc support on the sama5d36ek
arch/arm/boot/dts/sama5d36ek.dts | 27 +-
arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
15 files changed, 3042 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
--
1.9.1
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
this patch serie implements a simple DRM driver for the ATMEL High end LCD
controller found in the SAMA5 familly. It's based on the tilcdc driver.
It uses the cma_helper for memory and fbdev stuff.
Your comments are welcome !
Supported features:
* the base layer (the main framebuffer)
* a simple panel
* a backlight driver
* structure to 'easily' add other connectors (it comes from the tilcdc)
On the todo list:
* support overlays as drm_planes
* support for the hardware cursor
* support for the SiI9022 HDMI connector (present on sama5d36ek)
Jean-Jacques Hiblot (3):
atmel: drm: added drm driver for the atmel hlcd controller
atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
atmel: dt: Add supports for the lcdc support on the sama5d36ek
arch/arm/boot/dts/sama5d36ek.dts | 27 +-
arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
15 files changed, 3042 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
--
1.9.1
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
2014-04-18 9:45 ` Jean-Jacques Hiblot
(?)
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel, Jean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
13 files changed, 3005 insertions(+)
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 8e7fa4d..13fec638 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -190,6 +190,8 @@ source "drivers/gpu/drm/omapdrm/Kconfig"
source "drivers/gpu/drm/tilcdc/Kconfig"
+source "drivers/gpu/drm/atmel_hlcdc/Kconfig"
+
source "drivers/gpu/drm/qxl/Kconfig"
source "drivers/gpu/drm/bochs/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 292a79d..8245aa5 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
obj-$(CONFIG_DRM_TILCDC) += tilcdc/
+obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc/
obj-$(CONFIG_DRM_QXL) += qxl/
obj-$(CONFIG_DRM_BOCHS) += bochs/
obj-$(CONFIG_DRM_MSM) += msm/
diff --git a/drivers/gpu/drm/atmel_hlcdc/Kconfig b/drivers/gpu/drm/atmel_hlcdc/Kconfig
new file mode 100644
index 0000000..6ee5989
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/Kconfig
@@ -0,0 +1,13 @@
+config DRM_ATMEL_HLCDC
+ tristate "DRM Support for ATMEL HLCDC Display Controller"
+ depends on DRM && OF && ARM
+ select DRM_KMS_HELPER
+ select DRM_KMS_FB_HELPER
+ select DRM_KMS_CMA_HELPER
+ select DRM_GEM_CMA_HELPER
+ select VIDEOMODE_HELPERS
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_LCD_SUPPORT
+ help
+ Choose this option if you have an ATMEL SoC with HLCDC display
+ controller, for example SAMA5D36EK.
diff --git a/drivers/gpu/drm/atmel_hlcdc/Makefile b/drivers/gpu/drm/atmel_hlcdc/Makefile
new file mode 100644
index 0000000..4935c36
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/Makefile
@@ -0,0 +1,12 @@
+ccflags-y := -Iinclude/drm
+ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
+ ccflags-y += -Werror
+endif
+
+atmel_hlcdc-y := \
+ atmel_hlcdc_crtc.o \
+ atmel_hlcdc_panel.o \
+ atmel_hlcdc_backlight.o \
+ atmel_hlcdc_drv.o
+
+obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc.o
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
new file mode 100644
index 0000000..8ed0767
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
@@ -0,0 +1,771 @@
+/*
+ * Header file for AT91 High end LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef __ATMEL_HLCD_H__
+#define __ATMEL_HLCD_H__
+
+/* Lcdc hardware registers */
+#define ATMEL_LCDC_LCDCFG0 0x0000
+#define LCDC_LCDCFG0_CLKPOL (0x1 << 0)
+#define LCDC_LCDCFG0_CLKSEL (0x1 << 2)
+#define LCDC_LCDCFG0_CLKPWMSEL (0x1 << 3)
+#define LCDC_LCDCFG0_CGDISBASE (0x1 << 8)
+#define LCDC_LCDCFG0_CGDISOVR1 (0x1 << 9)
+#define LCDC_LCDCFG0_CGDISOVR2 (0x1 << 10)
+#define LCDC_LCDCFG0_CGDISHEO (0x1 << 11)
+#define LCDC_LCDCFG0_CGDISHCR (0x1 << 12)
+#define LCDC_LCDCFG0_CGDISPP (0x1 << 13)
+#define LCDC_LCDCFG0_CLKDIV_OFFSET 16
+#define LCDC_LCDCFG0_CLKDIV (0xff << LCDC_LCDCFG0_CLKDIV_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG1 0x0004
+#define LCDC_LCDCFG1_HSPW_OFFSET 0
+#define LCDC_LCDCFG1_HSPW (0x3f << LCDC_LCDCFG1_HSPW_OFFSET)
+#define LCDC_LCDCFG1_VSPW_OFFSET 16
+#define LCDC_LCDCFG1_VSPW (0x3f << LCDC_LCDCFG1_VSPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG2 0x0008
+#define LCDC_LCDCFG2_VFPW_OFFSET 0
+#define LCDC_LCDCFG2_VFPW (0x3f << LCDC_LCDCFG2_VFPW_OFFSET)
+#define LCDC_LCDCFG2_VBPW_OFFSET 16
+#define LCDC_LCDCFG2_VBPW (0x3f << LCDC_LCDCFG2_VBPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG3 0x000C
+#define LCDC_LCDCFG3_HFPW_OFFSET 0
+#define LCDC_LCDCFG3_HFPW (0xff << LCDC_LCDCFG3_HFPW_OFFSET)
+#define LCDC2_LCDCFG3_HFPW (0x1ff << LCDC_LCDCFG3_HFPW_OFFSET)
+#define LCDC_LCDCFG3_HBPW_OFFSET 16
+#define LCDC_LCDCFG3_HBPW (0xff << LCDC_LCDCFG3_HBPW_OFFSET)
+#define LCDC2_LCDCFG3_HBPW (0x1ff << LCDC_LCDCFG3_HBPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG4 0x0010
+#define LCDC_LCDCFG4_PPL_OFFSET 0
+#define LCDC_LCDCFG4_PPL (0x7ff << LCDC_LCDCFG4_PPL_OFFSET)
+#define LCDC_LCDCFG4_RPF_OFFSET 16
+#define LCDC_LCDCFG4_RPF (0x7ff << LCDC_LCDCFG4_RPF_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG5 0x0014
+#define LCDC_LCDCFG5_HSPOL (0x1 << 0)
+#define LCDC_LCDCFG5_VSPOL (0x1 << 1)
+#define LCDC_LCDCFG5_VSPDLYS (0x1 << 2)
+#define LCDC_LCDCFG5_VSPDLYE (0x1 << 3)
+#define LCDC_LCDCFG5_DISPPOL (0x1 << 4)
+#define LCDC_LCDCFG5_SERIAL (0x1 << 5)
+#define LCDC_LCDCFG5_DITHER (0x1 << 6)
+#define LCDC_LCDCFG5_DISPDLY (0x1 << 7)
+#define LCDC_LCDCFG5_MODE_OFFSET 8
+#define LCDC_LCDCFG5_MODE (0x3 << LCDC_LCDCFG5_MODE_OFFSET)
+#define LCDC_LCDCFG5_MODE_OUTPUT_12BPP (0x0 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_16BPP (0x1 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_18BPP (0x2 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_24BPP (0x3 << 8)
+#define LCDC_LCDCFG5_PP (0x1 << 10)
+#define LCDC_LCDCFG5_VSPSU (0x1 << 12)
+#define LCDC_LCDCFG5_VSPHO (0x1 << 13)
+#define LCDC_LCDCFG5_GUARDTIME_OFFSET 16
+#define LCDC_LCDCFG5_GUARDTIME (0x1f << LCDC_LCDCFG5_GUARDTIME_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG6 0x0018
+#define LCDC_LCDCFG6_PWMPS_OFFSET 0
+#define LCDC_LCDCFG6_PWMPS (0x7 << LCDC_LCDCFG6_PWMPS_OFFSET)
+#define LCDC_LCDCFG6_PWMPOL (0x1 << 4)
+#define LCDC_LCDCFG6_PWMCVAL_OFFSET 8
+#define LCDC_LCDCFG6_PWMCVAL (0xff << LCDC_LCDCFG6_PWMCVAL_OFFSET)
+
+#define ATMEL_LCDC_LCDEN 0x0020
+#define LCDC_LCDEN_CLKEN (0x1 << 0)
+#define LCDC_LCDEN_SYNCEN (0x1 << 1)
+#define LCDC_LCDEN_DISPEN (0x1 << 2)
+#define LCDC_LCDEN_PWMEN (0x1 << 3)
+
+#define ATMEL_LCDC_LCDDIS 0x0024
+#define LCDC_LCDDIS_CLKDIS (0x1 << 0)
+#define LCDC_LCDDIS_SYNCDIS (0x1 << 1)
+#define LCDC_LCDDIS_DISPDIS (0x1 << 2)
+#define LCDC_LCDDIS_PWMDIS (0x1 << 3)
+#define LCDC_LCDDIS_CLKRST (0x1 << 8)
+#define LCDC_LCDDIS_SYNCRST (0x1 << 9)
+#define LCDC_LCDDIS_DISPRST (0x1 << 10)
+#define LCDC_LCDDIS_PWMRST (0x1 << 11)
+
+#define ATMEL_LCDC_LCDSR 0x0028
+#define LCDC_LCDSR_CLKSTS (0x1 << 0)
+#define LCDC_LCDSR_LCDSTS (0x1 << 1)
+#define LCDC_LCDSR_DISPSTS (0x1 << 2)
+#define LCDC_LCDSR_PWMSTS (0x1 << 3)
+#define LCDC_LCDSR_SIPSTS (0x1 << 4)
+
+#define ATMEL_LCDC_LCDIER 0x002C
+#define LCDC_LCDIER_SOFIE (0x1 << 0)
+#define LCDC_LCDIER_DISIE (0x1 << 1)
+#define LCDC_LCDIER_DISPIE (0x1 << 2)
+#define LCDC_LCDIER_FIFOERRIE (0x1 << 4)
+#define LCDC_LCDIER_BASEIE (0x1 << 8)
+#define LCDC_LCDIER_OVR1IE (0x1 << 9)
+#define LCDC_LCDIER_OVR2IE (0x1 << 10)
+#define LCDC_LCDIER_HEOIE (0x1 << 11)
+#define LCDC_LCDIER_HCRIE (0x1 << 12)
+#define LCDC_LCDIER_PPIE (0x1 << 13)
+
+#define ATMEL_LCDC_LCDIDR 0x0030
+#define LCDC_LCDIDR_SOFID (0x1 << 0)
+#define LCDC_LCDIDR_DISID (0x1 << 1)
+#define LCDC_LCDIDR_DISPID (0x1 << 2)
+#define LCDC_LCDIDR_FIFOERRID (0x1 << 4)
+#define LCDC_LCDIDR_BASEID (0x1 << 8)
+#define LCDC_LCDIDR_OVR1ID (0x1 << 9)
+#define LCDC_LCDIDR_OVR2ID (0x1 << 10)
+#define LCDC_LCDIDR_HEOID (0x1 << 11)
+#define LCDC_LCDIDR_HCRID (0x1 << 12)
+#define LCDC_LCDIDR_PPID (0x1 << 13)
+
+#define ATMEL_LCDC_LCDIMR 0x0034
+#define LCDC_LCDIMR_SOFIM (0x1 << 0)
+#define LCDC_LCDIMR_DISIM (0x1 << 1)
+#define LCDC_LCDIMR_DISPIM (0x1 << 2)
+#define LCDC_LCDIMR_FIFOERRIM (0x1 << 4)
+#define LCDC_LCDIMR_BASEIM (0x1 << 8)
+#define LCDC_LCDIMR_OVR1IM (0x1 << 9)
+#define LCDC_LCDIMR_OVR2IM (0x1 << 10)
+#define LCDC_LCDIMR_HEOIM (0x1 << 11)
+#define LCDC_LCDIMR_HCRIM (0x1 << 12)
+#define LCDC_LCDIMR_PPIM (0x1 << 13)
+
+#define ATMEL_LCDC_LCDISR 0x0038
+#define LCDC_LCDISR_SOF (0x1 << 0)
+#define LCDC_LCDISR_DIS (0x1 << 1)
+#define LCDC_LCDISR_DISP (0x1 << 2)
+#define LCDC_LCDISR_FIFOERR (0x1 << 4)
+#define LCDC_LCDISR_BASE (0x1 << 8)
+#define LCDC_LCDISR_OVR1 (0x1 << 9)
+#define LCDC_LCDISR_OVR2 (0x1 << 10)
+#define LCDC_LCDISR_HEO (0x1 << 11)
+#define LCDC_LCDISR_HCR (0x1 << 12)
+#define LCDC_LCDISR_PP (0x1 << 13)
+
+#define ATMEL_LCDC_BASECHER 0x0040
+#define LCDC_BASECHER_CHEN (0x1 << 0)
+#define LCDC_BASECHER_UPDATEEN (0x1 << 1)
+#define LCDC_BASECHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_BASECHDR 0x0044
+#define LCDC_BASECHDR_CHDIS (0x1 << 0)
+#define LCDC_BASECHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_BASECHSR 0x0048
+#define LCDC_BASECHSR_CHSR (0x1 << 0)
+#define LCDC_BASECHSR_UPDATESR (0x1 << 1)
+#define LCDC_BASECHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_BASEIER 0x004C
+#define LCDC_BASEIER_DMA (0x1 << 2)
+#define LCDC_BASEIER_DSCR (0x1 << 3)
+#define LCDC_BASEIER_ADD (0x1 << 4)
+#define LCDC_BASEIER_DONE (0x1 << 5)
+#define LCDC_BASEIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEIDR 0x0050
+#define LCDC_BASEIDR_DMA (0x1 << 2)
+#define LCDC_BASEIDR_DSCR (0x1 << 3)
+#define LCDC_BASEIDR_ADD (0x1 << 4)
+#define LCDC_BASEIDR_DONE (0x1 << 5)
+#define LCDC_BASEIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEIMR 0x0054
+#define LCDC_BASEIMR_DMA (0x1 << 2)
+#define LCDC_BASEIMR_DSCR (0x1 << 3)
+#define LCDC_BASEIMR_ADD (0x1 << 4)
+#define LCDC_BASEIMR_DONE (0x1 << 5)
+#define LCDC_BASEIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEISR 0x0058
+#define LCDC_BASEISR_DMA (0x1 << 2)
+#define LCDC_BASEISR_DSCR (0x1 << 3)
+#define LCDC_BASEISR_ADD (0x1 << 4)
+#define LCDC_BASEISR_DONE (0x1 << 5)
+#define LCDC_BASEISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEHEAD 0x005C
+
+#define ATMEL_LCDC_BASEADDR 0x0060
+
+#define ATMEL_LCDC_BASECTRL 0x0064
+#define LCDC_BASECTRL_DFETCH (0x1 << 0)
+#define LCDC_BASECTRL_LFETCH (0x1 << 1)
+#define LCDC_BASECTRL_DMAIEN (0x1 << 2)
+#define LCDC_BASECTRL_DSCRIEN (0x1 << 3)
+#define LCDC_BASECTRL_ADDIEN (0x1 << 4)
+#define LCDC_BASECTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_BASENEXT 0x0068
+
+#define ATMEL_LCDC_BASECFG0 0x006C
+#define LCDC_BASECFG0_SIF (0x1 << 0)
+#define LCDC_BASECFG0_BLEN_OFFSET 4
+#define LCDC_BASECFG0_BLEN (0x3 << LCDC_BASECFG0_BLEN_OFFSET)
+#define LCDC_BASECFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_BASECFG0_DLBO (0x1 << 8)
+
+#define ATMEL_LCDC_BASECFG1 0x0070
+#define LCDC_BASECFG1_CLUTEN (0x1 << 0)
+#define LCDC_BASECFG1_RGBMODE_OFFSET 4
+#define LCDC_BASECFG1_RGBMODE (0xf << LCDC_BASECFG1_RGBMODE_OFFSET)
+#define LCDC_BASECFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_BASECFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_BASECFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_BASECFG1_CLUTMODE_OFFSET 8
+#define LCDC_BASECFG1_CLUTMODE (0x3 << LCDC_BASECFG1_CLUTMODE_OFFSET)
+#define LCDC_BASECFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_BASECFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_BASECFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_BASECFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_BASECFG2 0x0074
+
+#define ATMEL_LCDC_BASECFG3 0x0078
+#define LCDC_BASECFG3_BDEF_OFFSET 0
+#define LCDC_BASECFG3_BDEF (0xff << LCDC_BASECFG3_BDEF_OFFSET)
+#define LCDC_BASECFG3_GDEF_OFFSET 8
+#define LCDC_BASECFG3_GDEF (0xff << LCDC_BASECFG3_GDEF_OFFSET)
+#define LCDC_BASECFG3_RDEF_OFFSET 16
+#define LCDC_BASECFG3_RDEF (0xff << LCDC_BASECFG3_RDEF_OFFSET)
+
+#define ATMEL_LCDC_BASECFG4 0x007C
+#define LCDC_BASECFG4_DMA (0x1 << 8)
+#define LCDC_BASECFG4_REP (0x1 << 9)
+#define LCDC_BASECFG4_DISCEN (0x1 << 11)
+
+#define ATMEL_LCDC_BASECFG5 0x0080
+#define LCDC_BASECFG5_DISCXPOS_OFFSET 0
+#define LCDC_BASECFG5_DISCXPOS (0x7ff << LCDC_BASECFG5_DISCXPOS_OFFSET)
+#define LCDC_BASECFG5_DISCYPOS_OFFSET 16
+#define LCDC_BASECFG5_DISCYPOS (0x7ff << LCDC_BASECFG5_DISCYPOS_OFFSET)
+
+#define ATMEL_LCDC_BASECFG6 0x0084
+#define LCDC_BASECFG6_DISCXSIZE_OFFSET 0
+#define LCDC_BASECFG6_DISCXSIZE (0x7ff << LCDC_BASECFG6_DISCXSIZE_OFFSET)
+#define LCDC_BASECFG6_DISCYSIZE_OFFSET 16
+#define LCDC_BASECFG6_DISCYSIZE (0x7ff << LCDC_BASECFG6_DISCYSIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCHER 0x0280
+#define ATMEL_LCDC2_HEOCHER 0x0340
+#define LCDC_HEOCHER_CHEN (0x1 << 0)
+#define LCDC_HEOCHER_UPDATEEN (0x1 << 1)
+#define LCDC_HEOCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_HEOCHDR 0x0284
+#define LCDC_HEOCHDR_CHDIS (0x1 << 0)
+#define LCDC_HEOCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_HEOCHSR 0x0288
+#define LCDC_HEOCHSR_CHSR (0x1 << 0)
+#define LCDC_HEOCHSR_UPDATESR (0x1 << 1)
+#define LCDC_HEOCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_HEOIER 0x028C
+#define LCDC_HEOIER_DMA (0x1 << 2)
+#define LCDC_HEOIER_DSCR (0x1 << 3)
+#define LCDC_HEOIER_ADD (0x1 << 4)
+#define LCDC_HEOIER_DONE (0x1 << 5)
+#define LCDC_HEOIER_OVR (0x1 << 6)
+#define LCDC_HEOIER_UDMA (0x1 << 10)
+#define LCDC_HEOIER_UDSCR (0x1 << 11)
+#define LCDC_HEOIER_UADD (0x1 << 12)
+#define LCDC_HEOIER_UDONE (0x1 << 13)
+#define LCDC_HEOIER_UOVR (0x1 << 14)
+#define LCDC_HEOIER_VDMA (0x1 << 18)
+#define LCDC_HEOIER_VDSCR (0x1 << 19)
+#define LCDC_HEOIER_VADD (0x1 << 20)
+#define LCDC_HEOIER_VDONE (0x1 << 21)
+#define LCDC_HEOIER_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOIDR 0x0290
+#define LCDC_HEOIDR_DMA (0x1 << 2)
+#define LCDC_HEOIDR_DSCR (0x1 << 3)
+#define LCDC_HEOIDR_ADD (0x1 << 4)
+#define LCDC_HEOIDR_DONE (0x1 << 5)
+#define LCDC_HEOIDR_OVR (0x1 << 6)
+#define LCDC_HEOIDR_UDMA (0x1 << 10)
+#define LCDC_HEOIDR_UDSCR (0x1 << 11)
+#define LCDC_HEOIDR_UADD (0x1 << 12)
+#define LCDC_HEOIDR_UDONE (0x1 << 13)
+#define LCDC_HEOIDR_UOVR (0x1 << 14)
+#define LCDC_HEOIDR_VDMA (0x1 << 18)
+#define LCDC_HEOIDR_VDSCR (0x1 << 19)
+#define LCDC_HEOIDR_VADD (0x1 << 20)
+#define LCDC_HEOIDR_VDONE (0x1 << 21)
+#define LCDC_HEOIDR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOIMR 0x0294
+#define LCDC_HEOIMR_DMA (0x1 << 2)
+#define LCDC_HEOIMR_DSCR (0x1 << 3)
+#define LCDC_HEOIMR_ADD (0x1 << 4)
+#define LCDC_HEOIMR_DONE (0x1 << 5)
+#define LCDC_HEOIMR_OVR (0x1 << 6)
+#define LCDC_HEOIMR_UDMA (0x1 << 10)
+#define LCDC_HEOIMR_UDSCR (0x1 << 11)
+#define LCDC_HEOIMR_UADD (0x1 << 12)
+#define LCDC_HEOIMR_UDONE (0x1 << 13)
+#define LCDC_HEOIMR_UOVR (0x1 << 14)
+#define LCDC_HEOIMR_VDMA (0x1 << 18)
+#define LCDC_HEOIMR_VDSCR (0x1 << 19)
+#define LCDC_HEOIMR_VADD (0x1 << 20)
+#define LCDC_HEOIMR_VDONE (0x1 << 21)
+#define LCDC_HEOIMR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOISR 0x0298
+#define LCDC_HEOISR_DMA (0x1 << 2)
+#define LCDC_HEOISR_DSCR (0x1 << 3)
+#define LCDC_HEOISR_ADD (0x1 << 4)
+#define LCDC_HEOISR_DONE (0x1 << 5)
+#define LCDC_HEOISR_OVR (0x1 << 6)
+#define LCDC_HEOISR_UDMA (0x1 << 10)
+#define LCDC_HEOISR_UDSCR (0x1 << 11)
+#define LCDC_HEOISR_UADD (0x1 << 12)
+#define LCDC_HEOISR_UDONE (0x1 << 13)
+#define LCDC_HEOISR_UOVR (0x1 << 14)
+#define LCDC_HEOISR_VDMA (0x1 << 18)
+#define LCDC_HEOISR_VDSCR (0x1 << 19)
+#define LCDC_HEOISR_VADD (0x1 << 20)
+#define LCDC_HEOISR_VDONE (0x1 << 21)
+#define LCDC_HEOISR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOHEAD 0x029C
+
+#define ATMEL_LCDC_HEOADDR 0x02A0
+
+#define ATMEL_LCDC_HEOCTRL 0x02A4
+#define LCDC_HEOCTRL_DFETCH (0x1 << 0)
+#define LCDC_HEOCTRL_LFETCH (0x1 << 1)
+#define LCDC_HEOCTRL_DMAIEN (0x1 << 2)
+#define LCDC_HEOCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_HEOCTRL_ADDIEN (0x1 << 4)
+#define LCDC_HEOCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEONEXT 0x02A8
+
+#define ATMEL_LCDC_HEOUHEAD 0x02AC
+
+#define ATMEL_LCDC_HEOUADDR 0x02B0
+
+#define ATMEL_LCDC_HEOUCTRL 0x02B4
+#define LCDC_HEOUCTRL_UDFETCH (0x1 << 0)
+#define LCDC_HEOUCTRL_UDMAIEN (0x1 << 2)
+#define LCDC_HEOUCTRL_UDSCRIEN (0x1 << 3)
+#define LCDC_HEOUCTRL_UADDIEN (0x1 << 4)
+#define LCDC_HEOUCTRL_UDONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEOUNEXT 0x02B8
+
+#define ATMEL_LCDC_HEOVHEAD 0x02BC
+
+#define ATMEL_LCDC_HEOVADDR 0x02C0
+
+#define ATMEL_LCDC_HEOVCTRL 0x02C4
+#define LCDC_HEOVCTRL_VDFETCH (0x1 << 0)
+#define LCDC_HEOVCTRL_VDMAIEN (0x1 << 2)
+#define LCDC_HEOVCTRL_VDSCRIEN (0x1 << 3)
+#define LCDC_HEOVCTRL_VADDIEN (0x1 << 4)
+#define LCDC_HEOVCTRL_VDONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEOVNEXT 0x02C8
+
+#define ATMEL_LCDC_HEOCFG0 0x02CC
+#define LCDC_HEOCFG0_BLEN_OFFSET 4
+#define LCDC_HEOCFG0_BLEN (0x3 << LCDC_HEOCFG0_BLEN_OFFSET)
+#define LCDC_HEOCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_HEOCFG0_BLENUV_OFFSET 6
+#define LCDC_HEOCFG0_BLENUV (0x3 << LCDC_HEOCFG0_BLENUV_OFFSET)
+#define LCDC_HEOCFG0_BLENUV_AHB_SINGLE (0x0 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR4 (0x1 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR8 (0x2 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR16 (0x3 << 6)
+#define LCDC_HEOCFG0_DLBO (0x1 << 8)
+#define LCDC_HEOCFG0_ROTDIS (0x1 << 12)
+#define LCDC_HEOCFG0_LOCKDIS (0x1 << 13)
+
+#define ATMEL_LCDC_HEOCFG1 0x02D0
+#define LCDC_HEOCFG1_CLUTEN (0x1 << 0)
+#define LCDC_HEOCFG1_YUVEN (0x1 << 1)
+#define LCDC_HEOCFG1_RGBMODE_OFFSET 4
+#define LCDC_HEOCFG1_RGBMODE (0xf << LCDC_HEOCFG1_RGBMODE_OFFSET)
+#define LCDC_HEOCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_HEOCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_HEOCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_HEOCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_HEOCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_HEOCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_HEOCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_HEOCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_HEOCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_HEOCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_HEOCFG1_CLUTMODE_OFFSET 8
+#define LCDC_HEOCFG1_CLUTMODE (0x3 << LCDC_HEOCFG1_CLUTMODE_OFFSET)
+#define LCDC_HEOCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_8BPP (0x3 << 8)
+#define LCDC_HEOCFG1_YUVMODE_OFFSET 12
+#define LCDC_HEOCFG1_YUVMODE (0xf << LCDC_HEOCFG1_YUVMODE_OFFSET)
+#define LCDC_HEOCFG1_YUVMODE_32BPP_AYCBCR (0x0 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE0 (0x1 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE1 (0x2 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE2 (0x3 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE3 (0x4 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_SEMIPLANAR (0x5 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_PLANAR (0x6 << 12)
+#define LCDC_HEOCFG1_YUVMODE_12BPP_YCBCR_SEMIPLANAR (0x7 << 12)
+#define LCDC_HEOCFG1_YUVMODE_12BPP_YCBCR_PLANAR (0x8 << 12)
+#define LCDC_HEOCFG1_YUV422ROT (0x1 << 16)
+#define LCDC_HEOCFG1_YUV422SWP (0x1 << 17)
+
+#define ATMEL_LCDC_HEOCFG2 0x02D4
+#define LCDC_HEOCFG2_XOFFSET_OFFSET 0
+#define LCDC_HEOCFG2_XOFFSET (0x7ff << LCDC_HEOCFG2_XOFFSET_OFFSET)
+#define LCDC_HEOCFG2_YOFFSET_OFFSET 16
+#define LCDC_HEOCFG2_YOFFSET (0x7ff << LCDC_HEOCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG3 0x02D8
+#define LCDC_HEOCFG3_XSIZE_OFFSET 0
+#define LCDC_HEOCFG3_XSIZE (0x7ff << LCDC_HEOCFG3_XSIZE_OFFSET)
+#define LCDC_HEOCFG3_YSIZE_OFFSET 16
+#define LCDC_HEOCFG3_YSIZE (0x7ff << LCDC_HEOCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG4 0x02DC
+#define LCDC_HEOCFG4_XMEM_SIZE_OFFSET 0
+#define LCDC_HEOCFG4_XMEM_SIZE (0x7ff << LCDC_HEOCFG4_XMEM_SIZE_OFFSET)
+#define LCDC_HEOCFG4_YMEM_SIZE_OFFSET 16
+#define LCDC_HEOCFG4_YMEM_SIZE (0x7ff << LCDC_HEOCFG4_YMEM_SIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG5 0x02E0
+
+#define ATMEL_LCDC_HEOCFG6 0x02E4
+
+#define ATMEL_LCDC_HEOCFG7 0x02E8
+
+#define ATMEL_LCDC_HEOCFG8 0x02EC
+
+#define ATMEL_LCDC_HEOCFG9 0x02F0
+#define LCDC_HEOCFG9_BDEF_OFFSET 0
+#define LCDC_HEOCFG9_BDEF (0xff << LCDC_HEOCFG9_BDEF_OFFSET)
+#define LCDC_HEOCFG9_GDEF_OFFSET 8
+#define LCDC_HEOCFG9_GDEF (0xff << LCDC_HEOCFG9_GDEF_OFFSET)
+#define LCDC_HEOCFG9_RDEF_OFFSET 16
+#define LCDC_HEOCFG9_RDEF (0xff << LCDC_HEOCFG9_RDEF_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG10 0x02F4
+#define LCDC_HEOCFG10_BKEY_OFFSET 0
+#define LCDC_HEOCFG10_BKEY (0xff << LCDC_HEOCFG10_BKEY_OFFSET)
+#define LCDC_HEOCFG10_GKEY_OFFSET 8
+#define LCDC_HEOCFG10_GKEY (0xff << LCDC_HEOCFG10_GKEY_OFFSET)
+#define LCDC_HEOCFG10_RKEY_OFFSET 16
+#define LCDC_HEOCFG10_RKEY (0xff << LCDC_HEOCFG10_RKEY_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG11 0x02F8
+#define LCDC_HEOCFG11_BMASK_OFFSET 0
+#define LCDC_HEOCFG11_BMASK (0xff << LCDC_HEOCFG11_BMASK_OFFSET)
+#define LCDC_HEOCFG11_GMASK_OFFSET 8
+#define LCDC_HEOCFG11_GMASK (0xff << LCDC_HEOCFG11_GMASK_OFFSET)
+#define LCDC_HEOCFG11_RMASK_OFFSET 16
+#define LCDC_HEOCFG11_RMASK (0xff << LCDC_HEOCFG11_RMASK_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG12 0x02FC
+#define LCDC_HEOCFG12_CRKEY (0x1 << 0)
+#define LCDC_HEOCFG12_INV (0x1 << 1)
+#define LCDC_HEOCFG12_ITER2BL (0x1 << 2)
+#define LCDC_HEOCFG12_ITER (0x1 << 3)
+#define LCDC_HEOCFG12_REVALPHA (0x1 << 4)
+#define LCDC_HEOCFG12_GAEN (0x1 << 5)
+#define LCDC_HEOCFG12_LAEN (0x1 << 6)
+#define LCDC_HEOCFG12_OVR (0x1 << 7)
+#define LCDC_HEOCFG12_DMA (0x1 << 8)
+#define LCDC_HEOCFG12_REP (0x1 << 9)
+#define LCDC_HEOCFG12_DSTKEY (0x1 << 10)
+#define LCDC_HEOCFG12_VIDPRI (0x1 << 12)
+#define LCDC_HEOCFG12_GA_OFFSET 16
+#define LCDC_HEOCFG12_GA (0xff << LCDC_HEOCFG12_GA_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG13 0x0300
+#define LCDC_HEOCFG13_XFACTOR_OFFSET 0
+#define LCDC_HEOCFG13_XFACTOR (0x1fff << LCDC_HEOCFG13_XFACTOR_OFFSET)
+#define LCDC_HEOCFG13_YFACTOR_OFFSET 16
+#define LCDC_HEOCFG13_YFACTOR (0x1fff << LCDC_HEOCFG13_YFACTOR_OFFSET)
+#define LCDC_HEOCFG13_SCALEN (0x1 << 31)
+
+#define ATMEL_LCDC_HEOCFG14 0x0304
+#define LCDC_HEOCFG14_CSCRY_OFFSET 0
+#define LCDC_HEOCFG14_CSCRY (0x3ff << LCDC_HEOCFG14_CSCRY_OFFSET)
+#define LCDC_HEOCFG14_CSCRU_OFFSET 10
+#define LCDC_HEOCFG14_CSCRU (0x3ff << LCDC_HEOCFG14_CSCRU_OFFSET)
+#define LCDC_HEOCFG14_CSCRV_OFFSET 20
+#define LCDC_HEOCFG14_CSCRV (0x3ff << LCDC_HEOCFG14_CSCRV_OFFSET)
+#define LCDC_HEOCFG14_CSCYOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HEOCFG15 0x0308
+#define LCDC_HEOCFG15_CSCGY_OFFSET 0
+#define LCDC_HEOCFG15_CSCGY (0x3ff << LCDC_HEOCFG15_CSCGY_OFFSET)
+#define LCDC_HEOCFG15_CSCGU_OFFSET 10
+#define LCDC_HEOCFG15_CSCGU (0x3ff << LCDC_HEOCFG15_CSCGU_OFFSET)
+#define LCDC_HEOCFG15_CSCGV_OFFSET 20
+#define LCDC_HEOCFG15_CSCGV (0x3ff << LCDC_HEOCFG15_CSCGV_OFFSET)
+#define LCDC_HEOCFG15_CSCUOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HEOCFG16 0x030C
+#define LCDC_HEOCFG16_CSCBY_OFFSET 0
+#define LCDC_HEOCFG16_CSCBY (0x3ff << LCDC_HEOCFG16_CSCBY_OFFSET)
+#define LCDC_HEOCFG16_CSCBU_OFFSET 10
+#define LCDC_HEOCFG16_CSCBU (0x3ff << LCDC_HEOCFG16_CSCBU_OFFSET)
+#define LCDC_HEOCFG16_CSCBV_OFFSET 20
+#define LCDC_HEOCFG16_CSCBV (0x3ff << LCDC_HEOCFG16_CSCBV_OFFSET)
+#define LCDC_HEOCFG16_CSCVOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HCRCHER 0x0340
+#define LCDC_HCRCHER_CHEN (0x1 << 0)
+#define LCDC_HCRCHER_UPDATEEN (0x1 << 1)
+#define LCDC_HCRCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_HCRCHDR 0x0344
+#define LCDC_HCRCHDR_CHDIS (0x1 << 0)
+#define LCDC_HCRCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_HCRCHSR 0x0348
+#define LCDC_HCRCHSR_CHSR (0x1 << 0)
+#define LCDC_HCRCHSR_UPDATESR (0x1 << 1)
+#define LCDC_HCRCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_HCRIER 0x034C
+#define LCDC_HCRIER_DMA (0x1 << 2)
+#define LCDC_HCRIER_DSCR (0x1 << 3)
+#define LCDC_HCRIER_ADD (0x1 << 4)
+#define LCDC_HCRIER_DONE (0x1 << 5)
+#define LCDC_HCRIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRIDR 0x0350
+#define LCDC_HCRIDR_DMA (0x1 << 2)
+#define LCDC_HCRIDR_DSCR (0x1 << 3)
+#define LCDC_HCRIDR_ADD (0x1 << 4)
+#define LCDC_HCRIDR_DONE (0x1 << 5)
+#define LCDC_HCRIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRIMR 0x0354
+#define LCDC_HCRIMR_DMA (0x1 << 2)
+#define LCDC_HCRIMR_DSCR (0x1 << 3)
+#define LCDC_HCRIMR_ADD (0x1 << 4)
+#define LCDC_HCRIMR_DONE (0x1 << 5)
+#define LCDC_HCRIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRISR 0x0358
+#define LCDC_HCRISR_DMA (0x1 << 2)
+#define LCDC_HCRISR_DSCR (0x1 << 3)
+#define LCDC_HCRISR_ADD (0x1 << 4)
+#define LCDC_HCRISR_DONE (0x1 << 5)
+#define LCDC_HCRISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRHEAD 0x035C
+
+#define ATMEL_LCDC_HCRADDR 0x0360
+
+#define ATMEL_LCDC_HCRCTRL 0x0364
+#define LCDC_HCRCTRL_DFETCH (0x1 << 0)
+#define LCDC_HCRCTRL_LFETCH (0x1 << 1)
+#define LCDC_HCRCTRL_DMAIEN (0x1 << 2)
+#define LCDC_HCRCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_HCRCTRL_ADDIEN (0x1 << 4)
+#define LCDC_HCRCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HCRNEXT 0x0368
+
+#define ATMEL_LCDC_HCRCFG0 0x036C
+#define LCDC_HCRCFG0_BLEN_OFFSET 4
+#define LCDC_HCRCFG0_BLEN (0x3 << LCDC_HCRCFG0_BLEN_OFFSET)
+#define LCDC_HCRCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_HCRCFG0_DLBO (0x1 << 8)
+
+#define ATMEL_LCDC_HCRCFG1 0x0370
+#define LCDC_HCRCFG1_CLUTEN (0x1 << 0)
+#define LCDC_HCRCFG1_RGBMODE_OFFSET 4
+#define LCDC_HCRCFG1_RGBMODE (0xf << LCDC_HCRCFG1_RGBMODE_OFFSET)
+#define LCDC_HCRCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_HCRCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_HCRCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_HCRCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_HCRCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_HCRCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_HCRCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_HCRCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_HCRCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_HCRCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_HCRCFG1_CLUTMODE_OFFSET 8
+#define LCDC_HCRCFG1_CLUTMODE (0x3 << LCDC_HCRCFG1_CLUTMODE_OFFSET)
+#define LCDC_HCRCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_HCRCFG2 0x0374
+#define LCDC_HCRCFG2_XOFFSET_OFFSET 0
+#define LCDC_HCRCFG2_XOFFSET (0x7ff << LCDC_HCRCFG2_XOFFSET_OFFSET)
+#define LCDC_HCRCFG2_YOFFSET_OFFSET 16
+#define LCDC_HCRCFG2_YOFFSET (0x7ff << LCDC_HCRCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG3 0x0378
+#define LCDC_HCRCFG3_XSIZE_OFFSET 0
+#define LCDC_HCRCFG3_XSIZE (0x7f << LCDC_HCRCFG3_XSIZE_OFFSET)
+#define LCDC_HCRCFG3_YSIZE_OFFSET 16
+#define LCDC_HCRCFG3_YSIZE (0x7f << LCDC_HCRCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG4 0x037C
+
+#define ATMEL_LCDC_HCRCFG6 0x0384
+#define LCDC_HCRCFG6_BDEF_OFFSET 0
+#define LCDC_HCRCFG6_BDEF (0xff << LCDC_HCRCFG6_BDEF_OFFSET)
+#define LCDC_HCRCFG6_GDEF_OFFSET 8
+#define LCDC_HCRCFG6_GDEF (0xff << LCDC_HCRCFG6_GDEF_OFFSET)
+#define LCDC_HCRCFG6_RDEF_OFFSET 16
+#define LCDC_HCRCFG6_RDEF (0xff << LCDC_HCRCFG6_RDEF_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG7 0x0388
+#define LCDC_HCRCFG7_BKEY_OFFSET 0
+#define LCDC_HCRCFG7_BKEY (0xff << LCDC_HCRCFG7_BKEY_OFFSET)
+#define LCDC_HCRCFG7_GKEY_OFFSET 8
+#define LCDC_HCRCFG7_GKEY (0xff << LCDC_HCRCFG7_GKEY_OFFSET)
+#define LCDC_HCRCFG7_RKEY_OFFSET 16
+#define LCDC_HCRCFG7_RKEY (0xff << LCDC_HCRCFG7_RKEY_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG8 0x038C
+#define LCDC_HCRCFG8_BMASK_OFFSET 0
+#define LCDC_HCRCFG8_BMASK (0xff << LCDC_HCRCFG8_BMASK_OFFSET)
+#define LCDC_HCRCFG8_GMASK_OFFSET 8
+#define LCDC_HCRCFG8_GMASK (0xff << LCDC_HCRCFG8_GMASK_OFFSET)
+#define LCDC_HCRCFG8_RMASK_OFFSET 16
+#define LCDC_HCRCFG8_RMASK (0xff << LCDC_HCRCFG8_RMASK_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG9 0x0390
+#define LCDC_HCRCFG9_CRKEY (0x1 << 0)
+#define LCDC_HCRCFG9_INV (0x1 << 1)
+#define LCDC_HCRCFG9_ITER2BL (0x1 << 2)
+#define LCDC_HCRCFG9_ITER (0x1 << 3)
+#define LCDC_HCRCFG9_REVALPHA (0x1 << 4)
+#define LCDC_HCRCFG9_GAEN (0x1 << 5)
+#define LCDC_HCRCFG9_LAEN (0x1 << 6)
+#define LCDC_HCRCFG9_OVR (0x1 << 7)
+#define LCDC_HCRCFG9_DMA (0x1 << 8)
+#define LCDC_HCRCFG9_REP (0x1 << 9)
+#define LCDC_HCRCFG9_DSTKEY (0x1 << 10)
+#define LCDC_HCRCFG9_GA_OFFSET 16
+#define LCDC_HCRCFG9_GA_Msk (0xff << LCDC_HCRCFG9_GA_OFFSET)
+
+#define ATMEL_LCDC_BASECLUT 0x400
+#define ATMEL_LCDC2_BASECLUT 0x600
+#define LCDC_BASECLUT_BCLUT_OFFSET 0
+#define LCDC_BASECLUT_BCLUT (0xff << LCDC_BASECLUT_BCLUT_OFFSET)
+#define LCDC_BASECLUT_GCLUT_OFFSET 8
+#define LCDC_BASECLUT_GCLUT (0xff << LCDC_BASECLUT_GCLUT_OFFSET)
+#define LCDC_BASECLUT_RCLUT_OFFSET 16
+#define LCDC_BASECLUT_RCLUT (0xff << LCDC_BASECLUT_RCLUT_OFFSET)
+
+#define ATMEL_LCDC_OVR1CLUT 0x800
+#define ATMEL_LCDC2_OVR1CLUT 0xa00
+#define LCDC_OVR1CLUT_BCLUT_OFFSET 0
+#define LCDC_OVR1CLUT_BCLUT (0xff << LCDC_OVR1CLUT_BCLUT_OFFSET)
+#define LCDC_OVR1CLUT_GCLUT_OFFSET 8
+#define LCDC_OVR1CLUT_GCLUT (0xff << LCDC_OVR1CLUT_GCLUT_OFFSET)
+#define LCDC_OVR1CLUT_RCLUT_OFFSET 16
+#define LCDC_OVR1CLUT_RCLUT (0xff << LCDC_OVR1CLUT_RCLUT_OFFSET)
+#define LCDC_OVR1CLUT_ACLUT_OFFSET 24
+#define LCDC_OVR1CLUT_ACLUT (0xff << LCDC_OVR1CLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_OVR2CLUT 0xe00
+#define LCDC_OVR2CLUT_BCLUT_OFFSET 0
+#define LCDC_OVR2CLUT_BCLUT (0xff << LCDC_OVR2CLUT_BCLUT_OFFSET)
+#define LCDC_OVR2CLUT_GCLUT_OFFSET 8
+#define LCDC_OVR2CLUT_GCLUT (0xff << LCDC_OVR2CLUT_GCLUT_OFFSET)
+#define LCDC_OVR2CLUT_RCLUT_OFFSET 16
+#define LCDC_OVR2CLUT_RCLUT (0xff << LCDC_OVR2CLUT_RCLUT_OFFSET)
+#define LCDC_OVR2CLUT_ACLUT_OFFSET 24
+#define LCDC_OVR2CLUT_ACLUT (0xff << LCDC_OVR2CLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_HEOCLUT 0x1000
+#define ATMEL_LCDC2_HEOCLUT 0x1200
+#define LCDC_HEOCLUT_BCLUT_OFFSET 0
+#define LCDC_HEOCLUT_BCLUT (0xff << LCDC_HEOCLUT_BCLUT_OFFSET)
+#define LCDC_HEOCLUT_GCLUT_OFFSET 8
+#define LCDC_HEOCLUT_GCLUT (0xff << LCDC_HEOCLUT_GCLUT_OFFSET)
+#define LCDC_HEOCLUT_RCLUT_OFFSET 16
+#define LCDC_HEOCLUT_RCLUT (0xff << LCDC_HEOCLUT_RCLUT_OFFSET)
+#define LCDC_HEOCLUT_ACLUT_OFFSET 24
+#define LCDC_HEOCLUT_ACLUT (0xff << LCDC_HEOCLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_HCRCLUT 0x1400
+#define ATMEL_LCDC2_HCRCLUT 0x1600
+#define LCDC_HCRCLUT_BCLUT_OFFSET 0
+#define LCDC_HCRCLUT_BCLUT (0xff << LCDC_HCRCLUT_BCLUT_OFFSET)
+#define LCDC_HCRCLUT_GCLUT_OFFSET 8
+#define LCDC_HCRCLUT_GCLUT (0xff << LCDC_HCRCLUT_GCLUT_OFFSET)
+#define LCDC_HCRCLUT_RCLUT_OFFSET 16
+#define LCDC_HCRCLUT_RCLUT (0xff << LCDC_HCRCLUT_RCLUT_OFFSET)
+#define LCDC_HCRCLUT_ACLUT_OFFSET 24
+#define LCDC_HCRCLUT_ACLUT (0xff << LCDC_HCRCLUT_ACLUT_OFFSET)
+
+/* Base layer CLUT */
+#define ATMEL_HLCDC_LUT 0x0400
+
+
+static inline void hlcdc_write(struct drm_device *dev, u32 reg, u32 data)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ iowrite32(data, priv->mmio + reg);
+}
+
+static inline u32 hlcdc_read(struct drm_device *dev, u32 reg)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ return ioread32(priv->mmio + reg);
+}
+
+#endif /* __ATMEL_HLCDC4_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
new file mode 100644
index 0000000..143ba72
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
@@ -0,0 +1,92 @@
+/*
+ * atmel_hlcdc_backlight.c -- Backlight driver for the atmel HLCDC controller
+ *
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+
+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
+
+
+static int get_brightness(struct backlight_device *backlight)
+{
+ struct drm_device *dev = bl_get_data(backlight);
+
+ return (hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & LCDC_LCDCFG6_PWMCVAL)
+ >> LCDC_LCDCFG6_PWMCVAL_OFFSET;
+}
+
+static int update_status(struct backlight_device *backlight)
+{
+ struct drm_device *dev = bl_get_data(backlight);
+ int brightness = backlight->props.brightness;
+ u32 reg;
+
+ if (backlight->props.power != FB_BLANK_UNBLANK ||
+ backlight->props.state & BL_CORE_SUSPENDED)
+ brightness = 0;
+
+ reg = hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & ~LCDC_LCDCFG6_PWMCVAL;
+ reg |= brightness << LCDC_LCDCFG6_PWMCVAL_OFFSET;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, reg);
+ DBG("new brightness is : %d\n", get_brightness(backlight));
+ return 0;
+}
+
+
+
+static const struct backlight_ops atmel_drm_backlight_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = update_status,
+ .get_brightness = get_brightness,
+};
+
+int atmel_drm_backlight_init(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct backlight_device *backlight;
+
+ backlight = backlight_device_register("backlight", dev->dev, dev,
+ &atmel_drm_backlight_ops , NULL);
+ if (IS_ERR(backlight)) {
+ dev_err(dev->dev, "unable to register backlight device: %ld\n",
+ PTR_ERR(backlight));
+ return PTR_ERR(backlight);
+ }
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
+ (ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
+
+ backlight->props.max_brightness = 0xFF;
+ backlight->props.brightness = get_brightness(backlight);
+ backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(backlight);
+
+ priv->backlight = backlight;
+
+ return 0;
+}
+
+void atmel_drm_backlight_exit(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+
+ backlight_device_unregister(priv->backlight);
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
new file mode 100644
index 0000000..6a99101
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_BACKLIGHT_H__
+#define __ATMEL_HLCDC_BACKLIGHT_H__
+
+int atmel_drm_backlight_init(struct drm_device *dev);
+void atmel_drm_backlight_exit(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
new file mode 100644
index 0000000..649fa19
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
@@ -0,0 +1,702 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "drm_flip_work.h"
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+#include "atmel_hlcdc_ovl.h"
+
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+
+
+struct atmel_hlcd_dma_desc {
+ u32 address;
+ u32 control;
+ u32 next;
+ u32 dummy; /* for 64-bit alignment */
+};
+
+enum {
+ DMA_BASE = 0,
+ DMA_OVR_1,
+ DMA_OVR_2,
+ DMA_HEO,
+ DMA_HCR,
+ DMA_PP,
+ DMA_MAX
+};
+
+struct atmel_hlcdc_crtc {
+ struct drm_crtc base;
+ uint32_t dirty;
+ dma_addr_t start, end;
+ struct drm_pending_vblank_event *event;
+ int dpms;
+
+ struct atmel_hlcd_dma_desc *dma_descs[DMA_MAX];
+ dma_addr_t dma_descs_phys[DMA_MAX];
+
+ /* fb currently set to scanout 0/1: */
+ struct drm_framebuffer *fb;
+
+ /* for deferred fb unref's: */
+ struct drm_flip_work unref_work;
+#ifdef USE_LUT
+ u8 lut_r[256], lut_g[256], lut_b[256];
+#endif
+};
+#define to_atmel_hlcdc_crtc(x) container_of(x, struct atmel_hlcdc_crtc, base)
+
+static void unref_worker(struct drm_flip_work *work, void *val)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc =
+ container_of(work, struct atmel_hlcdc_crtc, unref_work);
+ struct drm_device *dev = atmel_hlcdc_crtc->base.dev;
+
+ mutex_lock(&dev->mode_config.mutex);
+ drm_framebuffer_unreference(val);
+ mutex_unlock(&dev->mode_config.mutex);
+}
+
+static void update_scanout(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+
+ struct drm_gem_cma_object *gem;
+ struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
+ unsigned int depth, bpp;
+ dma_addr_t start;
+ dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
+
+ drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
+ gem = drm_fb_cma_get_gem_obj(fb, 0);
+
+ start = gem->paddr + fb->offsets[0] +
+ (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
+
+ if (hlcdc_crtc->fb != fb) {
+ struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
+ drm_framebuffer_reference(fb);
+ hlcdc_crtc->fb = fb;
+ if (oldfb) {
+ drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
+ drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
+ }
+ }
+
+ if (desc->address != start) {
+ desc->address = start;
+ desc->next = desc_phys;
+ desc->control = LCDC_OVRCTRL_DFETCH;
+ }
+
+ if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
+ hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
+ hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
+ }
+}
+
+static void start(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
+ cpu_relax();
+}
+
+static void stop(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+
+ /* Disable DISP signal */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
+ cpu_relax();
+ /* Disable synchronization */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
+ cpu_relax();
+ /* Disable pixel clock */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
+ cpu_relax();
+ /* Disable PWM */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
+ cpu_relax();
+}
+
+static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
+
+ drm_crtc_cleanup(crtc);
+ drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
+
+ if (atmel_hlcdc_crtc->dma_descs[0])
+ dma_free_writecombine(dev->dev,
+ sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
+ atmel_hlcdc_crtc->dma_descs[0],
+ atmel_hlcdc_crtc->dma_descs_phys[0]);
+ kfree(atmel_hlcdc_crtc);
+}
+
+static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t page_flip_flags)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ if (atmel_hlcdc_crtc->event) {
+ dev_err(dev->dev, "already pending page flip!\n");
+ return -EBUSY;
+ }
+
+ crtc->fb = fb;
+ atmel_hlcdc_crtc->event = event;
+ update_scanout(crtc);
+ return 0;
+}
+
+static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ /* we really only care about on or off: */
+ if (mode != DRM_MODE_DPMS_ON)
+ mode = DRM_MODE_DPMS_OFF;
+
+ if (atmel_hlcdc_crtc->dpms == mode)
+ return;
+
+ atmel_hlcdc_crtc->dpms = mode;
+
+ pm_runtime_get_sync(dev->dev);
+
+ if (mode == DRM_MODE_DPMS_ON) {
+ pm_runtime_forbid(dev->dev);
+ start(crtc);
+ } else {
+ stop(crtc);
+ pm_runtime_allow(dev->dev);
+ }
+
+ pm_runtime_put_sync(dev->dev);
+}
+
+static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
+{
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
+{
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
+{
+ u32 value = 0;
+
+ switch (depth) {
+ case 1:
+ value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 2:
+ value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 4:
+ value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 8:
+ value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 12:
+ value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
+ break;
+ case 16:
+ value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
+ break;
+ case 18:
+ value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
+ break;
+ case 24:
+ value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
+ break;
+ case 32:
+ value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
+ break;
+ default:
+ dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
+ depth, bpp);
+ break;
+ }
+
+ return value;
+}
+
+
+void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ unsigned long value;
+ unsigned long clk_value_khz;
+
+ if (clock == 0)
+ clock = crtc->mode.clock;
+
+ pm_runtime_get_sync(dev->dev);
+
+ clk_value_khz = clk_get_rate(priv->clk) / 1000;
+
+ value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
+
+ if (value < 1) {
+ dev_notice(dev->dev, "using system clock as pixel clock\n");
+ value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
+ } else {
+ dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
+ clk_value_khz / value);
+ value = value - 2;
+ dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
+ value);
+ value = LCDC_LCDCFG0_CLKPWMSEL |
+ (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
+ | LCDC_LCDCFG0_CGDISBASE;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
+ }
+
+ pm_runtime_put_sync(dev->dev);
+}
+
+static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ int dpms = atmel_hlcdc_crtc->dpms;
+ int hbp, hfp, hsw, vbp, vfp, vsw;
+ unsigned int depth, bpp;
+ unsigned long value;
+ int ret;
+
+ ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
+ if (WARN_ON(ret))
+ return ret;
+
+ pm_runtime_get_sync(dev->dev);
+
+ if (dpms == DRM_MODE_DPMS_ON)
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+
+ dev_dbg(dev->dev, "%s:\n", __func__);
+
+
+ /* Set pixel clock */
+ atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
+
+ /* Initialize control register 5 */
+ value = priv->default_lcdcfg5;
+ value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
+ | LCDC_LCDCFG5_DISPDLY
+ | LCDC_LCDCFG5_VSPDLYS;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ value |= LCDC_LCDCFG5_HSPOL;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ value |= LCDC_LCDCFG5_VSPOL;
+
+ dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
+
+
+ /* Configure timings: */
+ hbp = MAX(mode->htotal - mode->hsync_end, 1);
+ hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
+ hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
+ vbp = MAX(mode->vtotal - mode->vsync_end, 0);
+ vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
+ vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
+
+ DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
+ mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
+
+ /* Vertical & Horizontal Timing */
+ value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
+ value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
+
+ value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
+ value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
+
+ value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
+ value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
+
+ /* Display size */
+ value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
+ value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
+
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
+ LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
+
+ drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
+ atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
+
+ /* Disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, ~0UL);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, ~0UL);
+ /* Enable BASE LAYER overflow interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
+ /* Enable FIFO error interrupt and the global BASE LAYER interrupt*/
+ hlcdc_write(dev, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
+ LCDC_LCDIER_BASEIE);
+
+
+ update_scanout(crtc);
+
+ atmel_hlcdc_crtc_dpms(crtc, dpms);
+
+ pm_runtime_put_sync(dev->dev);
+ return 0;
+}
+
+static int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ update_scanout(crtc);
+ return 0;
+}
+
+#ifdef USE_LUT
+static void atmel_hlcdc_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ int i;
+
+ if (!crtc->enabled)
+ return;
+
+ for (i = 0; i < 256; i++)
+ hlcdc_write(dev, ATMEL_HLCDC_LUT + (i*4),
+ (atmel_hlcdc_crtc->lut_r[i] << 16) |
+ (atmel_hlcdc_crtc->lut_g[i] << 8) |
+ (atmel_hlcdc_crtc->lut_b[i] << 0));
+}
+void atmel_hlcdc_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+ u16 blue, int regno)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+
+ atmel_hlcdc_crtc->lut_r[regno] = red;
+ atmel_hlcdc_crtc->lut_g[regno] = green;
+ atmel_hlcdc_crtc->lut_b[regno] = blue;
+}
+
+void atmel_hlcdc_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+
+ *red = atmel_hlcdc_crtc->lut_r[regno];
+ *green = atmel_hlcdc_crtc->lut_g[regno];
+ *blue = atmel_hlcdc_crtc->lut_b[regno];
+}
+#endif
+
+static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
+ .destroy = atmel_hlcdc_crtc_destroy,
+ .set_config = drm_crtc_helper_set_config,
+ .page_flip = atmel_hlcdc_crtc_page_flip,
+};
+
+static const struct drm_crtc_helper_funcs atmel_hlcdc_crtc_helper_funcs = {
+ .dpms = atmel_hlcdc_crtc_dpms,
+ .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
+ .prepare = atmel_hlcdc_crtc_prepare,
+ .commit = atmel_hlcdc_crtc_commit,
+ .mode_set = atmel_hlcdc_crtc_mode_set,
+ .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
+#ifdef USE_LUT
+ .load_lut = atmel_hlcdc_crtc_load_lut,
+#endif
+};
+
+int atmel_hlcdc_crtc_mode_valid(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
+{
+ struct atmel_hlcdc_drm_private *priv = crtc->dev->dev_private;
+ uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
+
+ /*
+ * check to see if the width is within the range that
+ * the LCD Controller physically supports
+ */
+ if (mode->hdisplay > 2048)
+ return MODE_VIRTUAL_X;
+
+ /* width must be multiple of 4 */
+ if (mode->hdisplay & 0x3)
+ return MODE_VIRTUAL_X;
+
+ if (mode->vdisplay > 2048)
+ return MODE_VIRTUAL_Y;
+
+ DBG("Processing mode %dx%d@%d with pixel clock %d",
+ mode->hdisplay, mode->vdisplay,
+ drm_mode_vrefresh(mode), mode->clock);
+
+ hbp = mode->htotal - mode->hsync_end;
+ hfp = mode->hsync_start - mode->hdisplay;
+ hsw = mode->hsync_end - mode->hsync_start;
+ vbp = mode->vtotal - mode->vsync_end;
+ vfp = mode->vsync_start - mode->vdisplay;
+ vsw = mode->vsync_end - mode->vsync_start;
+
+ if ((hbp-1) > 0x1ff) {
+ DBG("Pruning mode: Horizontal Back Porch out of range");
+ return MODE_HBLANK_WIDE;
+ }
+
+ if ((hfp-1) > 0x1ff) {
+ DBG("Pruning mode: Horizontal Front Porch out of range");
+ return MODE_HBLANK_WIDE;
+ }
+
+ if ((hsw-1) > 0x3f) {
+ DBG("Pruning mode: Horizontal Sync Width out of range");
+ return MODE_HSYNC_WIDE;
+ }
+
+ if (vbp > 0x3f) {
+ DBG("Pruning mode: Vertical Back Porch out of range");
+ return MODE_VBLANK_WIDE;
+ }
+
+ if ((vfp - 1) > 0x3f) {
+ DBG("Pruning mode: Vertical Front Porch out of range");
+ return MODE_VBLANK_WIDE;
+ }
+
+ if ((vsw - 1) > 0x3f) {
+ DBG("Pruning mode: Vertical Sync Width out of range");
+ return MODE_VSYNC_WIDE;
+ }
+
+ /*
+ * some devices have a maximum allowed pixel clock
+ * configured from the DT
+ */
+ if (mode->clock > priv->max_pixelclock) {
+ DBG("Pruning mode: pixel clock too high");
+ return MODE_CLOCK_HIGH;
+ }
+
+ return MODE_OK;
+}
+
+irqreturn_t handle_base_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_LCDISR) &
+ hlcdc_read(dev, ATMEL_LCDC_LCDIMR);
+
+ if (status & LCDC_BASEISR_OVR)
+ dev_warn(dev->dev, "base layer overflow %#x\n", status);
+
+ if (status)
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
+}
+irqreturn_t handle_ovr_irq(struct drm_device *dev, int id)
+{
+ uint32_t status = hlcdc_ovl_read(dev, id, ATMEL_LCDC_OVRISR) &
+ hlcdc_ovl_read(dev, id, ATMEL_LCDC_OVRIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_heo_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_HEOISR) &
+ hlcdc_read(dev, ATMEL_LCDC_HEOIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_hcr_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_HCRISR) &
+ hlcdc_read(dev, ATMEL_LCDC_HCRIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_pp_irq(struct drm_device *dev)
+{
+ return IRQ_NONE;
+}
+
+irqreturn_t atmel_hlcdc_crtc_irq(struct drm_crtc *crtc)
+{
+ uint32_t status;
+ struct drm_device *dev = crtc->dev;
+
+ status = hlcdc_read(dev, ATMEL_LCDC_LCDISR) &
+ hlcdc_read(dev, ATMEL_LCDC_LCDIMR);
+ if (!status) {
+ dev_warn(dev->dev, "spurious interrupt!\n");
+ return IRQ_NONE;
+ }
+
+ if (status & LCDC_LCDISR_BASE)
+ handle_base_irq(dev);
+ if (status & LCDC_LCDISR_OVR1)
+ handle_ovr_irq(dev, 0);
+ if (status & LCDC_LCDISR_OVR2)
+ handle_ovr_irq(dev, 1);
+ if (status & LCDC_LCDISR_HEO)
+ handle_heo_irq(dev);
+ if (status & LCDC_LCDISR_HCR)
+ handle_hcr_irq(dev);
+ if (status & LCDC_LCDISR_PP)
+ handle_pp_irq(dev);
+
+ if (status & LCDC_LCDISR_FIFOERR)
+ dev_warn(dev->dev, "FIFO underflow %#x\n", status);
+
+ return IRQ_HANDLED;
+}
+
+void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *crtc,
+ struct drm_file *file)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_pending_vblank_event *event;
+ struct drm_device *dev = crtc->dev;
+ unsigned long flags;
+
+ /* Destroy the pending vertical blanking event associated with the
+ * pending page flip, if any, and disable vertical blanking interrupts.
+ */
+ spin_lock_irqsave(&dev->event_lock, flags);
+ event = atmel_hlcdc_crtc->event;
+ if (event && event->base.file_priv == file) {
+ atmel_hlcdc_crtc->event = NULL;
+ event->base.destroy(&event->base);
+ drm_vblank_put(dev, 0);
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+struct drm_crtc *atmel_hlcdc_crtc_create(struct drm_device *dev)
+{
+ int i;
+ struct atmel_hlcdc_crtc *hlcdc;
+ struct drm_crtc *crtc;
+ int ret;
+
+ hlcdc = kzalloc(sizeof(struct atmel_hlcdc_crtc), GFP_KERNEL);
+ if (!hlcdc) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ crtc = &hlcdc->base;
+
+ hlcdc->dpms = DRM_MODE_DPMS_OFF;
+
+ hlcdc->dma_descs[0] = dma_alloc_writecombine(dev->dev,
+ sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
+ &(hlcdc->dma_descs_phys[0]),
+ GFP_KERNEL);
+ for (i = 1; i < DMA_MAX; i++) {
+ hlcdc->dma_descs[i] = hlcdc->dma_descs[0] + i;
+ hlcdc->dma_descs_phys[i] = hlcdc->dma_descs_phys[0] +
+ (i * sizeof(struct atmel_hlcd_dma_desc));
+ hlcdc->dma_descs[i]->address = 0;
+ hlcdc->dma_descs[i]->control = 0;
+ hlcdc->dma_descs[i]->next = 0;
+ }
+
+ ret = drm_flip_work_init(&hlcdc->unref_work, 16,
+ "unref", unref_worker);
+ if (ret) {
+ dev_err(dev->dev, "could not allocate unref FIFO\n");
+ goto fail;
+ }
+
+ ret = drm_crtc_init(dev, crtc, &atmel_hlcdc_crtc_funcs);
+ if (ret < 0)
+ goto fail;
+
+ drm_crtc_helper_add(crtc, &atmel_hlcdc_crtc_helper_funcs);
+
+ return crtc;
+
+fail:
+ atmel_hlcdc_crtc_destroy(crtc);
+ return NULL;
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
new file mode 100644
index 0000000..c8aedc8
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
@@ -0,0 +1,586 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+#include "atmel_hlcdc_ovl.h"
+#include "atmel_hlcdc_panel.h"
+#include "atmel_hlcdc_backlight.h"
+
+#include "drm_fb_helper.h"
+
+static LIST_HEAD(module_list);
+static bool slave_probing;
+
+void atmel_hlcdc_module_init(struct atmel_hlcdc_module *mod, const char *name,
+ const struct atmel_hlcdc_module_ops *funcs)
+{
+ mod->name = name;
+ mod->funcs = funcs;
+ INIT_LIST_HEAD(&mod->list);
+ list_add(&mod->list, &module_list);
+}
+
+void atmel_hlcdc_module_cleanup(struct atmel_hlcdc_module *mod)
+{
+ list_del(&mod->list);
+}
+
+void atmel_hlcdc_slave_probedefer(bool defered)
+{
+ slave_probing = defered;
+}
+
+static struct of_device_id atmel_hlcdc_of_match[];
+
+static struct drm_framebuffer *atmel_hlcdc_fb_create(struct drm_device *dev,
+ struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd)
+{
+ return drm_fb_cma_create(dev, file_priv, mode_cmd);
+}
+
+static void atmel_hlcdc_fb_output_poll_changed(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+
+ if (priv->fbdev)
+ drm_fbdev_cma_hotplug_event(priv->fbdev);
+}
+
+static const struct drm_mode_config_funcs mode_config_funcs = {
+ .fb_create = atmel_hlcdc_fb_create,
+ .output_poll_changed = atmel_hlcdc_fb_output_poll_changed,
+};
+
+static int modeset_init(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct atmel_hlcdc_module *mod;
+
+ atmel_drm_backlight_init(dev);
+
+ drm_mode_config_init(dev);
+
+ priv->crtc = atmel_hlcdc_crtc_create(dev);
+
+ list_for_each_entry(mod, &module_list, list) {
+ DBG("loading module: %s", mod->name);
+ mod->funcs->modeset_init(mod, dev);
+ }
+
+ if ((priv->num_encoders == 0) || (priv->num_connectors == 0)) {
+ /* oh nos! */
+ dev_err(dev->dev, "no encoders/connectors found\n");
+ return -ENXIO;
+ }
+
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+ dev->mode_config.funcs = &mode_config_funcs;
+ return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct atmel_hlcdc_drm_private *priv = container_of(nb,
+ struct atmel_hlcdc_drm_private, freq_transition);
+
+ if (val == CPUFREQ_POSTCHANGE) {
+ if (priv->lcd_fck_rate != clk_get_rate(priv->clk)) {
+ priv->lcd_fck_rate = clk_get_rate(priv->clk);
+ atmel_hlcdc_crtc_update_clk(priv->crtc, 0);
+ }
+ }
+
+ return 0;
+}
+#endif
+
+/*
+ * DRM operations:
+ */
+
+static int atmel_hlcdc_unload(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct atmel_hlcdc_module *mod, *cur;
+
+ drm_kms_helper_poll_fini(dev);
+ drm_mode_config_cleanup(dev);
+ drm_vblank_cleanup(dev);
+
+ pm_runtime_get_sync(dev->dev);
+ drm_irq_uninstall(dev);
+ pm_runtime_put_sync(dev->dev);
+
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_unregister_notifier(&priv->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+ if (priv->clk)
+ clk_put(priv->clk);
+
+ if (priv->mmio)
+ iounmap(priv->mmio);
+
+ flush_workqueue(priv->wq);
+ destroy_workqueue(priv->wq);
+
+ dev->dev_private = NULL;
+
+ pm_runtime_disable(dev->dev);
+
+ list_for_each_entry_safe(mod, cur, &module_list, list) {
+ DBG("destroying module: %s", mod->name);
+ mod->funcs->destroy(mod);
+ }
+
+ kfree(priv);
+
+ return 0;
+}
+
+static int atmel_hlcdc_load(struct drm_device *dev, unsigned long flags)
+{
+ struct platform_device *pdev = dev->platformdev;
+ struct device_node *node = pdev->dev.of_node;
+ struct atmel_hlcdc_drm_private *priv;
+ struct atmel_hlcdc_module *mod;
+ struct resource *res;
+ u32 bpp = 0;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(dev->dev, "failed to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dev->dev_private = priv;
+
+ priv->wq = alloc_ordered_workqueue("atmel_hlcdc", 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev->dev, "failed to get memory resource\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ priv->mmio = ioremap_nocache(res->start, resource_size(res));
+ if (!priv->mmio) {
+ dev_err(dev->dev, "failed to ioremap\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ priv->clk = clk_get(dev->dev, "lcdc_clk");
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev->dev, "failed to get lcd clock\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+ clk_prepare_enable(priv->clk);
+
+ priv->bus_clk = clk_get(dev->dev, "bus_clk");
+ if (IS_ERR(priv->bus_clk)) {
+ dev_dbg(dev->dev, "no bus clock defined.\n");
+ priv->bus_clk = NULL;
+ }
+ if (priv->bus_clk)
+ clk_prepare_enable(priv->bus_clk);
+
+#ifdef CONFIG_CPU_FREQ
+ priv->lcd_fck_rate = clk_get_rate(priv->clk);
+ priv->freq_transition.notifier_call = cpufreq_transition;
+ ret = cpufreq_register_notifier(&priv->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (ret) {
+ dev_err(dev->dev, "failed to register cpufreq notifier\n");
+ goto fail;
+ }
+#endif
+
+ if (of_property_read_u32(node, "default-lcdcfg5",
+ &priv->default_lcdcfg5))
+ priv->default_lcdcfg5 = LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
+
+ DBG("LCDCFG5 default value 0x%x", priv->default_lcdcfg5);
+
+ if (of_property_read_u32(node, "guard-time", &priv->guard_time))
+ priv->guard_time = 9;
+
+ DBG("Guard time Value 0x%x", priv->guard_time);
+
+ if (of_property_read_u32(node, "hlcdc,max-pixelclock",
+ &priv->max_pixelclock))
+ priv->max_pixelclock = ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK;
+
+ DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
+
+ pm_runtime_enable(dev->dev);
+
+ ret = modeset_init(dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to initialize mode setting\n");
+ goto fail;
+ }
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to initialize vblank\n");
+ goto fail;
+ }
+
+ pm_runtime_get_sync(dev->dev);
+ ret = drm_irq_install(dev);
+ pm_runtime_put_sync(dev->dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to install IRQ handler\n");
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ list_for_each_entry(mod, &module_list, list) {
+ DBG("%s: preferred_bpp: %d", mod->name, mod->preferred_bpp);
+ bpp = mod->preferred_bpp;
+ if (bpp > 0)
+ break;
+ }
+
+ priv->fbdev = drm_fbdev_cma_init(dev, bpp,
+ dev->mode_config.num_crtc,
+ dev->mode_config.num_connector);
+ drm_kms_helper_poll_init(dev);
+
+ return 0;
+
+fail:
+ atmel_hlcdc_unload(dev);
+ return ret;
+}
+
+static void atmel_hlcdc_preclose(struct drm_device *dev, struct drm_file *file)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ atmel_hlcdc_crtc_cancel_page_flip(priv->crtc, file);
+}
+
+static void atmel_hlcdc_lastclose(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ drm_fbdev_cma_restore_mode(priv->fbdev);
+}
+
+static irqreturn_t atmel_hlcdc_irq(int irq, void *arg)
+{
+ struct drm_device *dev = arg;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ return atmel_hlcdc_crtc_irq(priv->crtc);
+}
+
+static void atmel_hlcdc_irq_preinstall(struct drm_device *dev)
+{
+ /* disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HEOIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 0, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 1, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ /* read the IQR to clear all bits */
+ hlcdc_read(dev, ATMEL_LCDC_LCDISR);
+}
+
+static int atmel_hlcdc_irq_postinstall(struct drm_device *dev)
+{
+ /* enable FIFO underflow irq: */
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
+ hlcdc_write(dev, ATMEL_LCDC_LCDIER,
+ LCDC_LCDISR_BASE | LCDC_LCDISR_FIFOERR);
+
+ return 0;
+}
+
+static void atmel_hlcdc_irq_uninstall(struct drm_device *dev)
+{
+ /* disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HEOIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 0, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 1, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+}
+
+static int atmel_hlcdc_enable_vblank(struct drm_device *dev, int crtc)
+{
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_LCDIER_SOFIE);
+ return 0;
+}
+
+static void atmel_hlcdc_disable_vblank(struct drm_device *dev, int crtc)
+{
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_LCDIER_SOFIE);
+}
+
+
+
+#if defined(CONFIG_DEBUG_FS)
+enum reg_type {
+ RW, /* normal (read write at the same address) */
+ CS, /* 'set', 'clear' and 'read' are consecutive registers */
+};
+
+static const struct {
+ const char *name;
+ uint32_t reg;
+ enum reg_type type;
+} registers[] = {
+#define REG(type, reg) { #reg, reg, type }
+ REG(RW, ATMEL_LCDC_LCDCFG0),
+ REG(RW, ATMEL_LCDC_LCDCFG1),
+ REG(RW, ATMEL_LCDC_LCDCFG2),
+ REG(RW, ATMEL_LCDC_LCDCFG3),
+ REG(RW, ATMEL_LCDC_LCDCFG4),
+ REG(RW, ATMEL_LCDC_LCDCFG5),
+ REG(RW, ATMEL_LCDC_LCDCFG6),
+ REG(CS, ATMEL_LCDC_LCDEN),
+ REG(CS, ATMEL_LCDC_LCDIER),
+ REG(CS, ATMEL_LCDC_BASEIER),
+ REG(RW, ATMEL_LCDC_BASEHEAD),
+ REG(RW, ATMEL_LCDC_BASEADDR),
+ REG(RW, ATMEL_LCDC_BASECTRL),
+ REG(RW, ATMEL_LCDC_BASENEXT),
+ REG(RW, ATMEL_LCDC_BASECFG0),
+ REG(RW, ATMEL_LCDC_BASECFG1),
+ REG(RW, ATMEL_LCDC_BASECFG2),
+ REG(RW, ATMEL_LCDC_BASECFG3),
+ REG(RW, ATMEL_LCDC_BASECFG4),
+ REG(RW, ATMEL_LCDC_BASECFG5),
+ REG(RW, ATMEL_LCDC_BASECFG6),
+
+ REG(RW, ATMEL_LCDC_LCDISR),
+ REG(RW, ATMEL_LCDC_BASEISR),
+#undef REG
+};
+
+static int atmel_hlcdc_regs_show(struct seq_file *m, void *arg)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ unsigned i;
+
+ pm_runtime_get_sync(dev->dev);
+
+ seq_printf(m, "revision: %d\n", priv->rev);
+
+ for (i = 0; i < ARRAY_SIZE(registers); i++)
+ seq_printf(m, "%s:\t %08x\n", registers[i].name,
+ hlcdc_read(dev, registers[i].reg));
+
+ pm_runtime_put_sync(dev->dev);
+
+ return 0;
+}
+
+static int atmel_hlcdc_mm_show(struct seq_file *m, void *arg)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ return drm_mm_dump_table(m, &dev->vma_offset_manager->vm_addr_space_mm);
+}
+
+static struct drm_info_list atmel_hlcdc_debugfs_list[] = {
+ { "regs", atmel_hlcdc_regs_show, 0 },
+ { "mm", atmel_hlcdc_mm_show, 0 },
+ { "fb", drm_fb_cma_debugfs_show, 0 },
+};
+
+static int atmel_hlcdc_debugfs_init(struct drm_minor *minor)
+{
+ struct drm_device *dev = minor->dev;
+ struct atmel_hlcdc_module *mod;
+ int ret;
+
+ ret = drm_debugfs_create_files(atmel_hlcdc_debugfs_list,
+ ARRAY_SIZE(atmel_hlcdc_debugfs_list),
+ minor->debugfs_root, minor);
+
+ list_for_each_entry(mod, &module_list, list)
+ if (mod->funcs->debugfs_init)
+ mod->funcs->debugfs_init(mod, minor);
+
+ if (ret) {
+ dev_err(dev->dev, "could not install atmel_hlcdc_debugfs_list\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static void atmel_hlcdc_debugfs_cleanup(struct drm_minor *minor)
+{
+ struct atmel_hlcdc_module *mod;
+ drm_debugfs_remove_files(atmel_hlcdc_debugfs_list,
+ ARRAY_SIZE(atmel_hlcdc_debugfs_list), minor);
+
+ list_for_each_entry(mod, &module_list, list)
+ if (mod->funcs->debugfs_cleanup)
+ mod->funcs->debugfs_cleanup(mod, minor);
+}
+#endif
+
+
+static const struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .poll = drm_poll,
+ .read = drm_read,
+ .llseek = no_llseek,
+ .mmap = drm_gem_cma_mmap,
+};
+
+static struct drm_driver atmel_hlcdc_driver = {
+ .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET,
+ .load = atmel_hlcdc_load,
+ .unload = atmel_hlcdc_unload,
+ .preclose = atmel_hlcdc_preclose,
+ .lastclose = atmel_hlcdc_lastclose,
+ .irq_handler = atmel_hlcdc_irq,
+ .irq_preinstall = atmel_hlcdc_irq_preinstall,
+ .irq_postinstall = atmel_hlcdc_irq_postinstall,
+ .irq_uninstall = atmel_hlcdc_irq_uninstall,
+ .get_vblank_counter = drm_vblank_count,
+ .enable_vblank = atmel_hlcdc_enable_vblank,
+ .disable_vblank = atmel_hlcdc_disable_vblank,
+ .gem_free_object = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+ .dumb_create = drm_gem_cma_dumb_create,
+ .dumb_map_offset = drm_gem_cma_dumb_map_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
+#ifdef CONFIG_DEBUG_FS
+ .debugfs_init = atmel_hlcdc_debugfs_init,
+ .debugfs_cleanup = atmel_hlcdc_debugfs_cleanup,
+#endif
+ .fops = &fops,
+ .name = "atmel_hlcdc",
+ .desc = "ATMEL HLCD Controller DRM",
+ .date = "20141504",
+ .major = 1,
+ .minor = 0,
+};
+
+/*
+ * Power management:
+ */
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_hlcdc_pm_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int atmel_hlcdc_pm_resume(struct device *dev)
+{
+ return 0;
+}
+
+static const struct dev_pm_ops atmel_hlcdc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(atmel_hlcdc_pm_suspend, atmel_hlcdc_pm_resume)
+};
+#endif
+
+/*
+ * Platform driver:
+ */
+
+static int atmel_hlcdc_pdev_probe(struct platform_device *pdev)
+{
+ /* bail out early if no DT data: */
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+
+ /* defer probing if slave is in deferred probing */
+ if (slave_probing == true)
+ return -EPROBE_DEFER;
+
+ return drm_platform_init(&atmel_hlcdc_driver, pdev);
+}
+
+static int atmel_hlcdc_pdev_remove(struct platform_device *pdev)
+{
+ drm_put_dev(platform_get_drvdata(pdev));
+ return 0;
+}
+
+static struct of_device_id atmel_hlcdc_of_match[] = {
+ { .compatible = "atmel,hlcdc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, atmel_hlcdc_of_match);
+
+static struct platform_driver atmel_hlcdc_platform_driver = {
+ .probe = atmel_hlcdc_pdev_probe,
+ .remove = atmel_hlcdc_pdev_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "atmel_hlcdc",
+#ifdef CONFIG_PM_SLEEP
+ .pm = &atmel_hlcdc_pm_ops,
+#endif
+ .of_match_table = atmel_hlcdc_of_match,
+ },
+};
+
+static int __init atmel_hlcdc_drm_init(void)
+{
+ atmel_hlcdc_panel_init();
+ return platform_driver_register(&atmel_hlcdc_platform_driver);
+}
+
+static void __exit atmel_hlcdc_drm_fini(void)
+{
+ atmel_hlcdc_panel_fini();
+ platform_driver_unregister(&atmel_hlcdc_platform_driver);
+}
+
+late_initcall(atmel_hlcdc_drm_init);
+module_exit(atmel_hlcdc_drm_fini);
+
+MODULE_AUTHOR("Jean-Jacques Hiblot <jjhiblot@traphandler.com");
+MODULE_DESCRIPTION("ATMEL HLCDC DRM Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
new file mode 100644
index 0000000..e5d6a76
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_DRV_H__
+#define __ATMEL_HLCDC_DRV_H__
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/list.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+/* Defaulting to pixel clock defined on AM335x */
+#define ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK 126000
+
+
+struct atmel_hlcdc_drm_private {
+ void __iomem *mmio;
+
+ struct clk *bus_clk; /* bus clock*/
+ struct clk *clk; /* functional clock */
+ int rev; /* IP revision */
+
+ uint32_t guard_time;
+
+ uint32_t default_lcdcfg5;
+ /*
+ * Pixel Clock will be restricted to some value as
+ * defined in the device datasheet measured in KHz
+ */
+ uint32_t max_pixelclock;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+ unsigned int lcd_fck_rate;
+#endif
+
+ struct workqueue_struct *wq;
+
+ struct drm_fbdev_cma *fbdev;
+
+ struct drm_crtc *crtc;
+
+ struct backlight_device *backlight;
+
+ unsigned int num_encoders;
+ struct drm_encoder *encoders[8];
+
+ unsigned int num_connectors;
+ struct drm_connector *connectors[8];
+};
+
+/* Sub-module for display. Since we don't know at compile time what panels
+ * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
+ * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
+ * separate drivers. If they are probed and found to be present, they
+ * register themselves with atmel_hlcdc_register_module().
+ */
+struct atmel_hlcdc_module;
+
+struct atmel_hlcdc_module_ops {
+ /* create appropriate encoders/connectors: */
+ int (*modeset_init)(struct atmel_hlcdc_module *mod,
+ struct drm_device *dev);
+ void (*destroy)(struct atmel_hlcdc_module *mod);
+#ifdef CONFIG_DEBUG_FS
+ /* create debugfs nodes (can be NULL): */
+ int (*debugfs_init)(struct atmel_hlcdc_module *mod,
+ struct drm_minor *minor);
+ /* cleanup debugfs nodes (can be NULL): */
+ void (*debugfs_cleanup)(struct atmel_hlcdc_module *mod,
+ struct drm_minor *minor);
+#endif
+};
+
+struct atmel_hlcdc_module {
+ const char *name;
+ struct list_head list;
+ const struct atmel_hlcdc_module_ops *funcs;
+ unsigned int preferred_bpp;
+};
+
+void atmel_hlcdc_module_init(struct atmel_hlcdc_module *mod, const char *name,
+ const struct atmel_hlcdc_module_ops *funcs);
+void atmel_hlcdc_module_cleanup(struct atmel_hlcdc_module *mod);
+void atmel_hlcdc_slave_probedefer(bool defered);
+
+#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+
+struct drm_crtc *atmel_hlcdc_crtc_create(struct drm_device *dev);
+void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *crtc,
+ struct drm_file *file);
+irqreturn_t atmel_hlcdc_crtc_irq(struct drm_crtc *crtc);
+void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock);
+int atmel_hlcdc_crtc_mode_valid(struct drm_crtc *crtc,
+ struct drm_display_mode *mode);
+
+#endif /* __ATMEL_HLCDC_DRV_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
new file mode 100644
index 0000000..a54dfd5
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
@@ -0,0 +1,190 @@
+/*
+ * Header file for AT91 High end LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __ATMEL_HLCD_OVL_H__
+#define __ATMEL_HLCD_OVL_H__
+
+/*
+ * OVL has a seperate resource which already starts at offset 0x100.
+ * So, these defines start at 0x0. The manual will list them at 0x100.
+ */
+
+#define ATMEL_LCDC_OVRCHER 0x0000
+#define LCDC_OVRCHER_CHEN (0x1 << 0)
+#define LCDC_OVRCHER_UPDATEEN (0x1 << 1)
+#define LCDC_OVRCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_OVRCHDR 0x0004
+#define LCDC_OVRCHDR_CHDIS (0x1 << 0)
+#define LCDC_OVRCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_OVRCHSR 0x0008
+#define LCDC_OVRCHSR_CHSR (0x1 << 0)
+#define LCDC_OVRCHSR_UPDATESR (0x1 << 1)
+#define LCDC_OVRCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_OVRIER 0x000C
+#define LCDC_OVRIER_DMA (0x1 << 2)
+#define LCDC_OVRIER_DSCR (0x1 << 3)
+#define LCDC_OVRIER_ADD (0x1 << 4)
+#define LCDC_OVRIER_DONE (0x1 << 5)
+#define LCDC_OVRIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRIDR 0x0010
+#define LCDC_OVRIDR_DMA (0x1 << 2)
+#define LCDC_OVRIDR_DSCR (0x1 << 3)
+#define LCDC_OVRIDR_ADD (0x1 << 4)
+#define LCDC_OVRIDR_DONE (0x1 << 5)
+#define LCDC_OVRIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRIMR 0x0014
+#define LCDC_OVRIMR_DMA (0x1 << 2)
+#define LCDC_OVRIMR_DSCR (0x1 << 3)
+#define LCDC_OVRIMR_ADD (0x1 << 4)
+#define LCDC_OVRIMR_DONE (0x1 << 5)
+#define LCDC_OVRIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRISR 0x0018
+#define LCDC_OVRISR_DMA (0x1 << 2)
+#define LCDC_OVRISR_DSCR (0x1 << 3)
+#define LCDC_OVRISR_ADD (0x1 << 4)
+#define LCDC_OVRISR_DONE (0x1 << 5)
+#define LCDC_OVRISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRHEAD 0x001C
+
+#define ATMEL_LCDC_OVRADDR 0x0020
+
+#define ATMEL_LCDC_OVRCTRL 0x0024
+#define LCDC_OVRCTRL_DFETCH (0x1 << 0)
+#define LCDC_OVRCTRL_LFETCH (0x1 << 1)
+#define LCDC_OVRCTRL_DMAIEN (0x1 << 2)
+#define LCDC_OVRCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_OVRCTRL_ADDIEN (0x1 << 4)
+#define LCDC_OVRCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_OVRNEXT 0x0028
+
+#define ATMEL_LCDC_OVRCFG0 0x002C
+#define LCDC_OVRCFG0_SIF (0x1 << 0)
+#define LCDC_OVRCFG0_BLEN_OFFSET 4
+#define LCDC_OVRCFG0_BLEN (0x3 << LCDC_OVRCFG0_BLEN_OFFSET)
+#define LCDC_OVRCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_OVRCFG0_DLBO (0x1 << 8)
+#define LCDC_OVRCFG0_ROTDIS (0x1 << 12)
+#define LCDC_OVRCFG0_LOCKDIS (0x1 << 13)
+
+#define ATMEL_LCDC_OVRCFG1 0x0030
+#define LCDC_OVRCFG1_CLUTEN (0x1 << 0)
+#define LCDC_OVRCFG1_RGBMODE_OFFSET 4
+#define LCDC_OVRCFG1_RGBMODE (0xf << LCDC_OVRCFG1_RGBMODE_OFFSET)
+#define LCDC_OVRCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_OVRCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_OVRCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_OVRCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_OVRCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_OVRCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_OVRCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_OVRCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_OVRCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_OVRCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_OVRCFG1_CLUTMODE_OFFSET 8
+#define LCDC_OVRCFG1_CLUTMODE (0x3 << LCDC_OVRCFG1_CLUTMODE_OFFSET)
+#define LCDC_OVRCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_OVRCFG2 0x0034
+#define LCDC_OVRCFG2_XOFFSET_OFFSET 0
+#define LCDC_OVRCFG2_XOFFSET (0x7ff << LCDC_OVRCFG2_XOFFSET_OFFSET)
+#define LCDC_OVRCFG2_YOFFSET_OFFSET 16
+#define LCDC_OVRCFG2_YOFFSET (0x7ff << LCDC_OVRCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG3 0x0038
+#define LCDC_OVRCFG3_XSIZE_OFFSET 0
+#define LCDC_OVRCFG3_XSIZE (0x7ff << LCDC_OVRCFG3_XSIZE_OFFSET)
+#define LCDC_OVRCFG3_YSIZE_OFFSET 16
+#define LCDC_OVRCFG3_YSIZE (0x7ff << LCDC_OVRCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG4 0x003C
+
+#define ATMEL_LCDC_OVRCFG5 0x0040
+
+#define ATMEL_LCDC_OVRCFG6 0x0044
+#define LCDC_OVRCFG6_BDEF_OFFSET 0
+#define LCDC_OVRCFG6_BDEF (0xff << LCDC_OVRCFG6_BDEF_OFFSET)
+#define LCDC_OVRCFG6_GDEF_OFFSET 8
+#define LCDC_OVRCFG6_GDEF (0xff << LCDC_OVRCFG6_GDEF_OFFSET)
+#define LCDC_OVRCFG6_RDEF_OFFSET 16
+#define LCDC_OVRCFG6_RDEF (0xff << LCDC_OVRCFG6_RDEF_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG7 0x0048
+#define LCDC_OVRCFG7_BKEY_OFFSET 0
+#define LCDC_OVRCFG7_BKEY (0xff << LCDC_OVRCFG7_BKEY_OFFSET)
+#define LCDC_OVRCFG7_GKEY_OFFSET 8
+#define LCDC_OVRCFG7_GKEY (0xff << LCDC_OVRCFG7_GKEY_OFFST)
+#define LCDC_OVRCFG7_RKEY_OFFSET 16
+#define LCDC_OVRCFG7_RKEY (0xff << LCDC_OVRCFG7_RKEY_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG8 0x004C
+#define LCDC_OVRCFG8_BMASK_OFFSET 0
+#define LCDC_OVRCFG8_BMASK (0xff << LCDC_OVRCFG8_BMASK_OFFSET)
+#define LCDC_OVRCFG8_GMASK_OFFSET 8
+#define LCDC_OVRCFG8_GMASK (0xff << LCDC_OVRCFG8_GMASK_OFFSET)
+#define LCDC_OVRCFG8_RMASK_OFFSET 16
+#define LCDC_OVRCFG8_RMASK (0xff << LCDC_OVRCFG8_RMASK_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG9 0x0050
+#define LCDC_OVRCFG9_CRKEY (0x1 << 0)
+#define LCDC_OVRCFG9_INV (0x1 << 1)
+#define LCDC_OVRCFG9_ITER2BL (0x1 << 2)
+#define LCDC_OVRCFG9_ITER (0x1 << 3)
+#define LCDC_OVRCFG9_REVALPHA (0x1 << 4)
+#define LCDC_OVRCFG9_GAEN (0x1 << 5)
+#define LCDC_OVRCFG9_LAEN (0x1 << 6)
+#define LCDC_OVRCFG9_OVR (0x1 << 7)
+#define LCDC_OVRCFG9_DMA (0x1 << 8)
+#define LCDC_OVRCFG9_REP (0x1 << 9)
+#define LCDC_OVRCFG9_DSTKEY (0x1 << 10)
+#define LCDC_OVRCFG9_GA_OFFSET 16
+#define LCDC_OVRCFG9_GA (0xff << LCDC_OVRCFG9_GA_OFFSET)
+
+
+static inline void hlcdc_ovl_write(struct drm_device *dev, int overlay,
+ u32 reg, u32 data)
+{
+ hlcdc_write(dev, (0x100 * overlay) + 0x140 + reg, data);
+}
+
+static inline u32 hlcdc_ovl_read(struct drm_device *dev, int overlay, u32 reg)
+{
+ return hlcdc_read(dev, (0x100 * overlay) + 0x140 + reg);
+}
+
+#endif /* __ATMEL_HLCD_OVL_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
new file mode 100644
index 0000000..b004247
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc panel driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/backlight.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include "atmel_hlcdc_drv.h"
+
+struct panel_module {
+ struct atmel_hlcdc_module base;
+ struct atmel_hlcdc_panel_info *info;
+ struct display_timings *timings;
+ struct backlight_device *backlight;
+ u32 preferred_bpp;
+ u32 enable_gpio_flags;
+ int enable_gpio;
+ int hsync_neg_pol;
+ int vsync_neg_pol;
+};
+#define to_panel_module(x) container_of(x, struct panel_module, base)
+
+
+/*
+ * Encoder:
+ */
+
+struct panel_encoder {
+ struct drm_encoder base;
+ struct panel_module *mod;
+};
+#define to_panel_encoder(x) container_of(x, struct panel_encoder, base)
+
+
+static void panel_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ drm_encoder_cleanup(encoder);
+ kfree(panel_encoder);
+}
+
+static void panel_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ struct backlight_device *backlight = panel_encoder->mod->backlight;
+
+ if (!backlight)
+ return;
+
+ backlight->props.power = mode == DRM_MODE_DPMS_ON
+ ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
+ backlight_update_status(backlight);
+
+ if (gpio_is_valid(panel_encoder->mod->enable_gpio)) {
+ int value = (mode == DRM_MODE_DPMS_ON) ? 1 : 0;
+
+ if (panel_encoder->mod->enable_gpio_flags & GPIO_ACTIVE_LOW)
+ value ^= 1;
+
+ gpio_set_value(panel_encoder->mod->enable_gpio, value);
+ }
+}
+
+static bool panel_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+
+ if (panel_encoder->mod->hsync_neg_pol)
+ adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (panel_encoder->mod->vsync_neg_pol)
+ adjusted_mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
+ return true;
+}
+
+static void panel_encoder_prepare(struct drm_encoder *encoder)
+{
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void panel_encoder_commit(struct drm_encoder *encoder)
+{
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static void panel_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* nothing needed */
+}
+
+static const struct drm_encoder_funcs panel_encoder_funcs = {
+ .destroy = panel_encoder_destroy,
+};
+
+static const struct drm_encoder_helper_funcs panel_encoder_helper_funcs = {
+ .dpms = panel_encoder_dpms,
+ .mode_fixup = panel_encoder_mode_fixup,
+ .prepare = panel_encoder_prepare,
+ .commit = panel_encoder_commit,
+ .mode_set = panel_encoder_mode_set,
+};
+
+static struct drm_encoder *panel_encoder_create(struct drm_device *dev,
+ struct panel_module *mod)
+{
+ struct panel_encoder *panel_encoder;
+ struct drm_encoder *encoder;
+ int ret;
+
+ panel_encoder = kzalloc(sizeof(*panel_encoder), GFP_KERNEL);
+ if (!panel_encoder) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_encoder->mod = mod;
+
+ encoder = &panel_encoder->base;
+ encoder->possible_crtcs = 1;
+
+ ret = drm_encoder_init(dev, encoder, &panel_encoder_funcs,
+ DRM_MODE_ENCODER_LVDS);
+ if (ret < 0)
+ goto fail;
+
+ drm_encoder_helper_add(encoder, &panel_encoder_helper_funcs);
+
+ return encoder;
+
+fail:
+ panel_encoder_destroy(encoder);
+ return NULL;
+}
+
+/*
+ * Connector:
+ */
+
+struct panel_connector {
+ struct drm_connector base;
+
+ struct drm_encoder *encoder; /* our connected encoder */
+ struct panel_module *mod;
+};
+#define to_panel_connector(x) container_of(x, struct panel_connector, base)
+
+
+static void panel_connector_destroy(struct drm_connector *connector)
+{
+ struct panel_connector *panel_con = to_panel_connector(connector);
+ drm_connector_cleanup(connector);
+ kfree(panel_con);
+}
+
+static enum drm_connector_status panel_connector_detect(
+ struct drm_connector *connector,
+ bool force)
+{
+ return connector_status_connected;
+}
+
+static int panel_connector_get_modes(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct panel_connector *panel_con = to_panel_connector(connector);
+ struct display_timings *timings = panel_con->mod->timings;
+ int i;
+
+ for (i = 0; i < timings->num_timings; i++) {
+ struct drm_display_mode *mode = drm_mode_create(dev);
+ struct videomode vm;
+
+ if (videomode_from_timings(timings, &vm, i))
+ break;
+
+ drm_display_mode_from_videomode(&vm, mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+
+ if (timings->native_mode == i)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ }
+
+ return i;
+}
+
+static int panel_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct atmel_hlcdc_drm_private *priv = connector->dev->dev_private;
+ /* our only constraints are what the crtc can generate: */
+ return atmel_hlcdc_crtc_mode_valid(priv->crtc, mode);
+}
+
+static struct drm_encoder *panel_connector_best_encoder(
+ struct drm_connector *connector)
+{
+ struct panel_connector *panel_connector = to_panel_connector(connector);
+ return panel_connector->encoder;
+}
+
+static const struct drm_connector_funcs panel_connector_funcs = {
+ .destroy = panel_connector_destroy,
+ .dpms = drm_helper_connector_dpms,
+ .detect = panel_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs panel_connector_helper_funcs = {
+ .get_modes = panel_connector_get_modes,
+ .mode_valid = panel_connector_mode_valid,
+ .best_encoder = panel_connector_best_encoder,
+};
+
+static struct drm_connector *panel_connector_create(struct drm_device *dev,
+ struct panel_module *mod, struct drm_encoder *encoder)
+{
+ struct panel_connector *panel_connector;
+ struct drm_connector *connector;
+ int ret;
+
+ panel_connector = kzalloc(sizeof(*panel_connector), GFP_KERNEL);
+ if (!panel_connector) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_connector->encoder = encoder;
+ panel_connector->mod = mod;
+
+ connector = &panel_connector->base;
+
+ drm_connector_init(dev, connector, &panel_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+ drm_connector_helper_add(connector, &panel_connector_helper_funcs);
+
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ ret = drm_mode_connector_attach_encoder(connector, encoder);
+ if (ret)
+ goto fail;
+
+ drm_sysfs_connector_add(connector);
+
+ return connector;
+
+fail:
+ panel_connector_destroy(connector);
+ return NULL;
+}
+
+/*
+ * Module:
+ */
+
+static int panel_modeset_init(struct atmel_hlcdc_module *mod,
+ struct drm_device *dev)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+
+ encoder = panel_encoder_create(dev, panel_mod);
+ if (!encoder)
+ return -ENOMEM;
+
+ connector = panel_connector_create(dev, panel_mod, encoder);
+ if (!connector)
+ return -ENOMEM;
+
+ priv->encoders[priv->num_encoders++] = encoder;
+ priv->connectors[priv->num_connectors++] = connector;
+
+ return 0;
+}
+
+static void panel_destroy(struct atmel_hlcdc_module *mod)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+
+ if (panel_mod->timings) {
+ display_timings_release(panel_mod->timings);
+ kfree(panel_mod->timings);
+ }
+
+ atmel_hlcdc_module_cleanup(mod);
+ kfree(panel_mod->info);
+ kfree(panel_mod);
+}
+
+static const struct atmel_hlcdc_module_ops panel_module_ops = {
+ .modeset_init = panel_modeset_init,
+ .destroy = panel_destroy,
+};
+
+/*
+ * Device:
+ */
+
+/* maybe move this somewhere common if it is needed by other outputs? */
+static int of_get_panel_info(struct device *dev, struct device_node *np,
+ struct panel_module *panel)
+{
+ enum of_gpio_flags flags;
+
+ int err = 0;
+
+ if (!np) {
+ pr_err("%s: no devicenode given\n", __func__);
+ return -EINVAL;
+ }
+ if (of_property_read_u32(np, "preferred-bpp",
+ &panel->preferred_bpp) < 0)
+ panel->preferred_bpp = 16;
+ panel->hsync_neg_pol = of_property_read_bool(np, "invert-hsync");
+ panel->vsync_neg_pol = of_property_read_bool(np, "invert-vsync");
+ panel->enable_gpio = of_get_named_gpio_flags(np, "enable-gpio",
+ 0, &flags);
+ if (gpio_is_valid(panel->enable_gpio)) {
+ unsigned int value;
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ panel->enable_gpio_flags |= GPIO_ACTIVE_LOW;
+
+ err = gpio_request(panel->enable_gpio, "bkl_enable");
+ if (err < 0) {
+ dev_err(dev, "failed to request GPIO#%u: %d\n",
+ panel->enable_gpio, err);
+ return err;
+ }
+
+ value = (panel->enable_gpio_flags & GPIO_ACTIVE_LOW) != 0;
+
+ err = gpio_direction_output(panel->enable_gpio, value);
+ if (err < 0) {
+ dev_err(dev, "failed to setup GPIO%u: %d\n",
+ panel->enable_gpio, err);
+ goto free_gpio;
+ }
+ }
+
+ return 0;
+
+free_gpio:
+ gpio_free(panel->enable_gpio);
+ return err;
+}
+
+static struct of_device_id panel_of_match[];
+
+static int panel_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct panel_module *panel_mod;
+ struct atmel_hlcdc_module *mod;
+ struct pinctrl *pinctrl;
+ int ret = -EINVAL;
+
+ /* bail out early if no DT data: */
+ if (!node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+ panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
+ if (!panel_mod)
+ return -ENOMEM;
+
+ mod = &panel_mod->base;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "pins are not configured\n");
+
+ panel_mod->timings = of_get_display_timings(node);
+ if (!panel_mod->timings) {
+ dev_err(&pdev->dev, "could not get panel timings\n");
+ goto fail;
+ }
+
+ if (of_get_panel_info(&pdev->dev, node, panel_mod) < 0) {
+ dev_err(&pdev->dev, "could not get panel info\n");
+ goto fail;
+ }
+
+ mod->preferred_bpp = panel_mod->preferred_bpp;
+
+ panel_mod->backlight = of_find_backlight_by_node(node);
+ if (panel_mod->backlight)
+ dev_info(&pdev->dev, "found backlight\n");
+
+
+ atmel_hlcdc_module_init(mod, "panel", &panel_module_ops);
+
+ return 0;
+
+fail:
+ panel_destroy(mod);
+ return ret;
+}
+
+static int panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct of_device_id panel_of_match[] = {
+ { .compatible = "atmel,hlcdc,panel", },
+ { },
+};
+
+struct platform_driver panel_driver = {
+ .probe = panel_probe,
+ .remove = panel_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "panel",
+ .of_match_table = panel_of_match,
+ },
+};
+
+int __init atmel_hlcdc_panel_init(void)
+{
+ return platform_driver_register(&panel_driver);
+}
+
+void __exit atmel_hlcdc_panel_fini(void)
+{
+ platform_driver_unregister(&panel_driver);
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
new file mode 100644
index 0000000..0f66169
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc panel driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_PANEL_H__
+#define __ATMEL_HLCDC_PANEL_H__
+
+/* sub-module for generic lcd panel output */
+
+int atmel_hlcdc_panel_init(void);
+void atmel_hlcdc_panel_fini(void);
+
+#endif /* __ATMEL_HLCDC_PANEL_H__ */
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
13 files changed, 3005 insertions(+)
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 8e7fa4d..13fec638 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -190,6 +190,8 @@ source "drivers/gpu/drm/omapdrm/Kconfig"
source "drivers/gpu/drm/tilcdc/Kconfig"
+source "drivers/gpu/drm/atmel_hlcdc/Kconfig"
+
source "drivers/gpu/drm/qxl/Kconfig"
source "drivers/gpu/drm/bochs/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 292a79d..8245aa5 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
obj-$(CONFIG_DRM_TILCDC) += tilcdc/
+obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc/
obj-$(CONFIG_DRM_QXL) += qxl/
obj-$(CONFIG_DRM_BOCHS) += bochs/
obj-$(CONFIG_DRM_MSM) += msm/
diff --git a/drivers/gpu/drm/atmel_hlcdc/Kconfig b/drivers/gpu/drm/atmel_hlcdc/Kconfig
new file mode 100644
index 0000000..6ee5989
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/Kconfig
@@ -0,0 +1,13 @@
+config DRM_ATMEL_HLCDC
+ tristate "DRM Support for ATMEL HLCDC Display Controller"
+ depends on DRM && OF && ARM
+ select DRM_KMS_HELPER
+ select DRM_KMS_FB_HELPER
+ select DRM_KMS_CMA_HELPER
+ select DRM_GEM_CMA_HELPER
+ select VIDEOMODE_HELPERS
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_LCD_SUPPORT
+ help
+ Choose this option if you have an ATMEL SoC with HLCDC display
+ controller, for example SAMA5D36EK.
diff --git a/drivers/gpu/drm/atmel_hlcdc/Makefile b/drivers/gpu/drm/atmel_hlcdc/Makefile
new file mode 100644
index 0000000..4935c36
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/Makefile
@@ -0,0 +1,12 @@
+ccflags-y := -Iinclude/drm
+ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
+ ccflags-y += -Werror
+endif
+
+atmel_hlcdc-y := \
+ atmel_hlcdc_crtc.o \
+ atmel_hlcdc_panel.o \
+ atmel_hlcdc_backlight.o \
+ atmel_hlcdc_drv.o
+
+obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc.o
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
new file mode 100644
index 0000000..8ed0767
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
@@ -0,0 +1,771 @@
+/*
+ * Header file for AT91 High end LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef __ATMEL_HLCD_H__
+#define __ATMEL_HLCD_H__
+
+/* Lcdc hardware registers */
+#define ATMEL_LCDC_LCDCFG0 0x0000
+#define LCDC_LCDCFG0_CLKPOL (0x1 << 0)
+#define LCDC_LCDCFG0_CLKSEL (0x1 << 2)
+#define LCDC_LCDCFG0_CLKPWMSEL (0x1 << 3)
+#define LCDC_LCDCFG0_CGDISBASE (0x1 << 8)
+#define LCDC_LCDCFG0_CGDISOVR1 (0x1 << 9)
+#define LCDC_LCDCFG0_CGDISOVR2 (0x1 << 10)
+#define LCDC_LCDCFG0_CGDISHEO (0x1 << 11)
+#define LCDC_LCDCFG0_CGDISHCR (0x1 << 12)
+#define LCDC_LCDCFG0_CGDISPP (0x1 << 13)
+#define LCDC_LCDCFG0_CLKDIV_OFFSET 16
+#define LCDC_LCDCFG0_CLKDIV (0xff << LCDC_LCDCFG0_CLKDIV_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG1 0x0004
+#define LCDC_LCDCFG1_HSPW_OFFSET 0
+#define LCDC_LCDCFG1_HSPW (0x3f << LCDC_LCDCFG1_HSPW_OFFSET)
+#define LCDC_LCDCFG1_VSPW_OFFSET 16
+#define LCDC_LCDCFG1_VSPW (0x3f << LCDC_LCDCFG1_VSPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG2 0x0008
+#define LCDC_LCDCFG2_VFPW_OFFSET 0
+#define LCDC_LCDCFG2_VFPW (0x3f << LCDC_LCDCFG2_VFPW_OFFSET)
+#define LCDC_LCDCFG2_VBPW_OFFSET 16
+#define LCDC_LCDCFG2_VBPW (0x3f << LCDC_LCDCFG2_VBPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG3 0x000C
+#define LCDC_LCDCFG3_HFPW_OFFSET 0
+#define LCDC_LCDCFG3_HFPW (0xff << LCDC_LCDCFG3_HFPW_OFFSET)
+#define LCDC2_LCDCFG3_HFPW (0x1ff << LCDC_LCDCFG3_HFPW_OFFSET)
+#define LCDC_LCDCFG3_HBPW_OFFSET 16
+#define LCDC_LCDCFG3_HBPW (0xff << LCDC_LCDCFG3_HBPW_OFFSET)
+#define LCDC2_LCDCFG3_HBPW (0x1ff << LCDC_LCDCFG3_HBPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG4 0x0010
+#define LCDC_LCDCFG4_PPL_OFFSET 0
+#define LCDC_LCDCFG4_PPL (0x7ff << LCDC_LCDCFG4_PPL_OFFSET)
+#define LCDC_LCDCFG4_RPF_OFFSET 16
+#define LCDC_LCDCFG4_RPF (0x7ff << LCDC_LCDCFG4_RPF_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG5 0x0014
+#define LCDC_LCDCFG5_HSPOL (0x1 << 0)
+#define LCDC_LCDCFG5_VSPOL (0x1 << 1)
+#define LCDC_LCDCFG5_VSPDLYS (0x1 << 2)
+#define LCDC_LCDCFG5_VSPDLYE (0x1 << 3)
+#define LCDC_LCDCFG5_DISPPOL (0x1 << 4)
+#define LCDC_LCDCFG5_SERIAL (0x1 << 5)
+#define LCDC_LCDCFG5_DITHER (0x1 << 6)
+#define LCDC_LCDCFG5_DISPDLY (0x1 << 7)
+#define LCDC_LCDCFG5_MODE_OFFSET 8
+#define LCDC_LCDCFG5_MODE (0x3 << LCDC_LCDCFG5_MODE_OFFSET)
+#define LCDC_LCDCFG5_MODE_OUTPUT_12BPP (0x0 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_16BPP (0x1 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_18BPP (0x2 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_24BPP (0x3 << 8)
+#define LCDC_LCDCFG5_PP (0x1 << 10)
+#define LCDC_LCDCFG5_VSPSU (0x1 << 12)
+#define LCDC_LCDCFG5_VSPHO (0x1 << 13)
+#define LCDC_LCDCFG5_GUARDTIME_OFFSET 16
+#define LCDC_LCDCFG5_GUARDTIME (0x1f << LCDC_LCDCFG5_GUARDTIME_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG6 0x0018
+#define LCDC_LCDCFG6_PWMPS_OFFSET 0
+#define LCDC_LCDCFG6_PWMPS (0x7 << LCDC_LCDCFG6_PWMPS_OFFSET)
+#define LCDC_LCDCFG6_PWMPOL (0x1 << 4)
+#define LCDC_LCDCFG6_PWMCVAL_OFFSET 8
+#define LCDC_LCDCFG6_PWMCVAL (0xff << LCDC_LCDCFG6_PWMCVAL_OFFSET)
+
+#define ATMEL_LCDC_LCDEN 0x0020
+#define LCDC_LCDEN_CLKEN (0x1 << 0)
+#define LCDC_LCDEN_SYNCEN (0x1 << 1)
+#define LCDC_LCDEN_DISPEN (0x1 << 2)
+#define LCDC_LCDEN_PWMEN (0x1 << 3)
+
+#define ATMEL_LCDC_LCDDIS 0x0024
+#define LCDC_LCDDIS_CLKDIS (0x1 << 0)
+#define LCDC_LCDDIS_SYNCDIS (0x1 << 1)
+#define LCDC_LCDDIS_DISPDIS (0x1 << 2)
+#define LCDC_LCDDIS_PWMDIS (0x1 << 3)
+#define LCDC_LCDDIS_CLKRST (0x1 << 8)
+#define LCDC_LCDDIS_SYNCRST (0x1 << 9)
+#define LCDC_LCDDIS_DISPRST (0x1 << 10)
+#define LCDC_LCDDIS_PWMRST (0x1 << 11)
+
+#define ATMEL_LCDC_LCDSR 0x0028
+#define LCDC_LCDSR_CLKSTS (0x1 << 0)
+#define LCDC_LCDSR_LCDSTS (0x1 << 1)
+#define LCDC_LCDSR_DISPSTS (0x1 << 2)
+#define LCDC_LCDSR_PWMSTS (0x1 << 3)
+#define LCDC_LCDSR_SIPSTS (0x1 << 4)
+
+#define ATMEL_LCDC_LCDIER 0x002C
+#define LCDC_LCDIER_SOFIE (0x1 << 0)
+#define LCDC_LCDIER_DISIE (0x1 << 1)
+#define LCDC_LCDIER_DISPIE (0x1 << 2)
+#define LCDC_LCDIER_FIFOERRIE (0x1 << 4)
+#define LCDC_LCDIER_BASEIE (0x1 << 8)
+#define LCDC_LCDIER_OVR1IE (0x1 << 9)
+#define LCDC_LCDIER_OVR2IE (0x1 << 10)
+#define LCDC_LCDIER_HEOIE (0x1 << 11)
+#define LCDC_LCDIER_HCRIE (0x1 << 12)
+#define LCDC_LCDIER_PPIE (0x1 << 13)
+
+#define ATMEL_LCDC_LCDIDR 0x0030
+#define LCDC_LCDIDR_SOFID (0x1 << 0)
+#define LCDC_LCDIDR_DISID (0x1 << 1)
+#define LCDC_LCDIDR_DISPID (0x1 << 2)
+#define LCDC_LCDIDR_FIFOERRID (0x1 << 4)
+#define LCDC_LCDIDR_BASEID (0x1 << 8)
+#define LCDC_LCDIDR_OVR1ID (0x1 << 9)
+#define LCDC_LCDIDR_OVR2ID (0x1 << 10)
+#define LCDC_LCDIDR_HEOID (0x1 << 11)
+#define LCDC_LCDIDR_HCRID (0x1 << 12)
+#define LCDC_LCDIDR_PPID (0x1 << 13)
+
+#define ATMEL_LCDC_LCDIMR 0x0034
+#define LCDC_LCDIMR_SOFIM (0x1 << 0)
+#define LCDC_LCDIMR_DISIM (0x1 << 1)
+#define LCDC_LCDIMR_DISPIM (0x1 << 2)
+#define LCDC_LCDIMR_FIFOERRIM (0x1 << 4)
+#define LCDC_LCDIMR_BASEIM (0x1 << 8)
+#define LCDC_LCDIMR_OVR1IM (0x1 << 9)
+#define LCDC_LCDIMR_OVR2IM (0x1 << 10)
+#define LCDC_LCDIMR_HEOIM (0x1 << 11)
+#define LCDC_LCDIMR_HCRIM (0x1 << 12)
+#define LCDC_LCDIMR_PPIM (0x1 << 13)
+
+#define ATMEL_LCDC_LCDISR 0x0038
+#define LCDC_LCDISR_SOF (0x1 << 0)
+#define LCDC_LCDISR_DIS (0x1 << 1)
+#define LCDC_LCDISR_DISP (0x1 << 2)
+#define LCDC_LCDISR_FIFOERR (0x1 << 4)
+#define LCDC_LCDISR_BASE (0x1 << 8)
+#define LCDC_LCDISR_OVR1 (0x1 << 9)
+#define LCDC_LCDISR_OVR2 (0x1 << 10)
+#define LCDC_LCDISR_HEO (0x1 << 11)
+#define LCDC_LCDISR_HCR (0x1 << 12)
+#define LCDC_LCDISR_PP (0x1 << 13)
+
+#define ATMEL_LCDC_BASECHER 0x0040
+#define LCDC_BASECHER_CHEN (0x1 << 0)
+#define LCDC_BASECHER_UPDATEEN (0x1 << 1)
+#define LCDC_BASECHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_BASECHDR 0x0044
+#define LCDC_BASECHDR_CHDIS (0x1 << 0)
+#define LCDC_BASECHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_BASECHSR 0x0048
+#define LCDC_BASECHSR_CHSR (0x1 << 0)
+#define LCDC_BASECHSR_UPDATESR (0x1 << 1)
+#define LCDC_BASECHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_BASEIER 0x004C
+#define LCDC_BASEIER_DMA (0x1 << 2)
+#define LCDC_BASEIER_DSCR (0x1 << 3)
+#define LCDC_BASEIER_ADD (0x1 << 4)
+#define LCDC_BASEIER_DONE (0x1 << 5)
+#define LCDC_BASEIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEIDR 0x0050
+#define LCDC_BASEIDR_DMA (0x1 << 2)
+#define LCDC_BASEIDR_DSCR (0x1 << 3)
+#define LCDC_BASEIDR_ADD (0x1 << 4)
+#define LCDC_BASEIDR_DONE (0x1 << 5)
+#define LCDC_BASEIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEIMR 0x0054
+#define LCDC_BASEIMR_DMA (0x1 << 2)
+#define LCDC_BASEIMR_DSCR (0x1 << 3)
+#define LCDC_BASEIMR_ADD (0x1 << 4)
+#define LCDC_BASEIMR_DONE (0x1 << 5)
+#define LCDC_BASEIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEISR 0x0058
+#define LCDC_BASEISR_DMA (0x1 << 2)
+#define LCDC_BASEISR_DSCR (0x1 << 3)
+#define LCDC_BASEISR_ADD (0x1 << 4)
+#define LCDC_BASEISR_DONE (0x1 << 5)
+#define LCDC_BASEISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEHEAD 0x005C
+
+#define ATMEL_LCDC_BASEADDR 0x0060
+
+#define ATMEL_LCDC_BASECTRL 0x0064
+#define LCDC_BASECTRL_DFETCH (0x1 << 0)
+#define LCDC_BASECTRL_LFETCH (0x1 << 1)
+#define LCDC_BASECTRL_DMAIEN (0x1 << 2)
+#define LCDC_BASECTRL_DSCRIEN (0x1 << 3)
+#define LCDC_BASECTRL_ADDIEN (0x1 << 4)
+#define LCDC_BASECTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_BASENEXT 0x0068
+
+#define ATMEL_LCDC_BASECFG0 0x006C
+#define LCDC_BASECFG0_SIF (0x1 << 0)
+#define LCDC_BASECFG0_BLEN_OFFSET 4
+#define LCDC_BASECFG0_BLEN (0x3 << LCDC_BASECFG0_BLEN_OFFSET)
+#define LCDC_BASECFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_BASECFG0_DLBO (0x1 << 8)
+
+#define ATMEL_LCDC_BASECFG1 0x0070
+#define LCDC_BASECFG1_CLUTEN (0x1 << 0)
+#define LCDC_BASECFG1_RGBMODE_OFFSET 4
+#define LCDC_BASECFG1_RGBMODE (0xf << LCDC_BASECFG1_RGBMODE_OFFSET)
+#define LCDC_BASECFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_BASECFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_BASECFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_BASECFG1_CLUTMODE_OFFSET 8
+#define LCDC_BASECFG1_CLUTMODE (0x3 << LCDC_BASECFG1_CLUTMODE_OFFSET)
+#define LCDC_BASECFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_BASECFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_BASECFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_BASECFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_BASECFG2 0x0074
+
+#define ATMEL_LCDC_BASECFG3 0x0078
+#define LCDC_BASECFG3_BDEF_OFFSET 0
+#define LCDC_BASECFG3_BDEF (0xff << LCDC_BASECFG3_BDEF_OFFSET)
+#define LCDC_BASECFG3_GDEF_OFFSET 8
+#define LCDC_BASECFG3_GDEF (0xff << LCDC_BASECFG3_GDEF_OFFSET)
+#define LCDC_BASECFG3_RDEF_OFFSET 16
+#define LCDC_BASECFG3_RDEF (0xff << LCDC_BASECFG3_RDEF_OFFSET)
+
+#define ATMEL_LCDC_BASECFG4 0x007C
+#define LCDC_BASECFG4_DMA (0x1 << 8)
+#define LCDC_BASECFG4_REP (0x1 << 9)
+#define LCDC_BASECFG4_DISCEN (0x1 << 11)
+
+#define ATMEL_LCDC_BASECFG5 0x0080
+#define LCDC_BASECFG5_DISCXPOS_OFFSET 0
+#define LCDC_BASECFG5_DISCXPOS (0x7ff << LCDC_BASECFG5_DISCXPOS_OFFSET)
+#define LCDC_BASECFG5_DISCYPOS_OFFSET 16
+#define LCDC_BASECFG5_DISCYPOS (0x7ff << LCDC_BASECFG5_DISCYPOS_OFFSET)
+
+#define ATMEL_LCDC_BASECFG6 0x0084
+#define LCDC_BASECFG6_DISCXSIZE_OFFSET 0
+#define LCDC_BASECFG6_DISCXSIZE (0x7ff << LCDC_BASECFG6_DISCXSIZE_OFFSET)
+#define LCDC_BASECFG6_DISCYSIZE_OFFSET 16
+#define LCDC_BASECFG6_DISCYSIZE (0x7ff << LCDC_BASECFG6_DISCYSIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCHER 0x0280
+#define ATMEL_LCDC2_HEOCHER 0x0340
+#define LCDC_HEOCHER_CHEN (0x1 << 0)
+#define LCDC_HEOCHER_UPDATEEN (0x1 << 1)
+#define LCDC_HEOCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_HEOCHDR 0x0284
+#define LCDC_HEOCHDR_CHDIS (0x1 << 0)
+#define LCDC_HEOCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_HEOCHSR 0x0288
+#define LCDC_HEOCHSR_CHSR (0x1 << 0)
+#define LCDC_HEOCHSR_UPDATESR (0x1 << 1)
+#define LCDC_HEOCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_HEOIER 0x028C
+#define LCDC_HEOIER_DMA (0x1 << 2)
+#define LCDC_HEOIER_DSCR (0x1 << 3)
+#define LCDC_HEOIER_ADD (0x1 << 4)
+#define LCDC_HEOIER_DONE (0x1 << 5)
+#define LCDC_HEOIER_OVR (0x1 << 6)
+#define LCDC_HEOIER_UDMA (0x1 << 10)
+#define LCDC_HEOIER_UDSCR (0x1 << 11)
+#define LCDC_HEOIER_UADD (0x1 << 12)
+#define LCDC_HEOIER_UDONE (0x1 << 13)
+#define LCDC_HEOIER_UOVR (0x1 << 14)
+#define LCDC_HEOIER_VDMA (0x1 << 18)
+#define LCDC_HEOIER_VDSCR (0x1 << 19)
+#define LCDC_HEOIER_VADD (0x1 << 20)
+#define LCDC_HEOIER_VDONE (0x1 << 21)
+#define LCDC_HEOIER_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOIDR 0x0290
+#define LCDC_HEOIDR_DMA (0x1 << 2)
+#define LCDC_HEOIDR_DSCR (0x1 << 3)
+#define LCDC_HEOIDR_ADD (0x1 << 4)
+#define LCDC_HEOIDR_DONE (0x1 << 5)
+#define LCDC_HEOIDR_OVR (0x1 << 6)
+#define LCDC_HEOIDR_UDMA (0x1 << 10)
+#define LCDC_HEOIDR_UDSCR (0x1 << 11)
+#define LCDC_HEOIDR_UADD (0x1 << 12)
+#define LCDC_HEOIDR_UDONE (0x1 << 13)
+#define LCDC_HEOIDR_UOVR (0x1 << 14)
+#define LCDC_HEOIDR_VDMA (0x1 << 18)
+#define LCDC_HEOIDR_VDSCR (0x1 << 19)
+#define LCDC_HEOIDR_VADD (0x1 << 20)
+#define LCDC_HEOIDR_VDONE (0x1 << 21)
+#define LCDC_HEOIDR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOIMR 0x0294
+#define LCDC_HEOIMR_DMA (0x1 << 2)
+#define LCDC_HEOIMR_DSCR (0x1 << 3)
+#define LCDC_HEOIMR_ADD (0x1 << 4)
+#define LCDC_HEOIMR_DONE (0x1 << 5)
+#define LCDC_HEOIMR_OVR (0x1 << 6)
+#define LCDC_HEOIMR_UDMA (0x1 << 10)
+#define LCDC_HEOIMR_UDSCR (0x1 << 11)
+#define LCDC_HEOIMR_UADD (0x1 << 12)
+#define LCDC_HEOIMR_UDONE (0x1 << 13)
+#define LCDC_HEOIMR_UOVR (0x1 << 14)
+#define LCDC_HEOIMR_VDMA (0x1 << 18)
+#define LCDC_HEOIMR_VDSCR (0x1 << 19)
+#define LCDC_HEOIMR_VADD (0x1 << 20)
+#define LCDC_HEOIMR_VDONE (0x1 << 21)
+#define LCDC_HEOIMR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOISR 0x0298
+#define LCDC_HEOISR_DMA (0x1 << 2)
+#define LCDC_HEOISR_DSCR (0x1 << 3)
+#define LCDC_HEOISR_ADD (0x1 << 4)
+#define LCDC_HEOISR_DONE (0x1 << 5)
+#define LCDC_HEOISR_OVR (0x1 << 6)
+#define LCDC_HEOISR_UDMA (0x1 << 10)
+#define LCDC_HEOISR_UDSCR (0x1 << 11)
+#define LCDC_HEOISR_UADD (0x1 << 12)
+#define LCDC_HEOISR_UDONE (0x1 << 13)
+#define LCDC_HEOISR_UOVR (0x1 << 14)
+#define LCDC_HEOISR_VDMA (0x1 << 18)
+#define LCDC_HEOISR_VDSCR (0x1 << 19)
+#define LCDC_HEOISR_VADD (0x1 << 20)
+#define LCDC_HEOISR_VDONE (0x1 << 21)
+#define LCDC_HEOISR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOHEAD 0x029C
+
+#define ATMEL_LCDC_HEOADDR 0x02A0
+
+#define ATMEL_LCDC_HEOCTRL 0x02A4
+#define LCDC_HEOCTRL_DFETCH (0x1 << 0)
+#define LCDC_HEOCTRL_LFETCH (0x1 << 1)
+#define LCDC_HEOCTRL_DMAIEN (0x1 << 2)
+#define LCDC_HEOCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_HEOCTRL_ADDIEN (0x1 << 4)
+#define LCDC_HEOCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEONEXT 0x02A8
+
+#define ATMEL_LCDC_HEOUHEAD 0x02AC
+
+#define ATMEL_LCDC_HEOUADDR 0x02B0
+
+#define ATMEL_LCDC_HEOUCTRL 0x02B4
+#define LCDC_HEOUCTRL_UDFETCH (0x1 << 0)
+#define LCDC_HEOUCTRL_UDMAIEN (0x1 << 2)
+#define LCDC_HEOUCTRL_UDSCRIEN (0x1 << 3)
+#define LCDC_HEOUCTRL_UADDIEN (0x1 << 4)
+#define LCDC_HEOUCTRL_UDONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEOUNEXT 0x02B8
+
+#define ATMEL_LCDC_HEOVHEAD 0x02BC
+
+#define ATMEL_LCDC_HEOVADDR 0x02C0
+
+#define ATMEL_LCDC_HEOVCTRL 0x02C4
+#define LCDC_HEOVCTRL_VDFETCH (0x1 << 0)
+#define LCDC_HEOVCTRL_VDMAIEN (0x1 << 2)
+#define LCDC_HEOVCTRL_VDSCRIEN (0x1 << 3)
+#define LCDC_HEOVCTRL_VADDIEN (0x1 << 4)
+#define LCDC_HEOVCTRL_VDONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEOVNEXT 0x02C8
+
+#define ATMEL_LCDC_HEOCFG0 0x02CC
+#define LCDC_HEOCFG0_BLEN_OFFSET 4
+#define LCDC_HEOCFG0_BLEN (0x3 << LCDC_HEOCFG0_BLEN_OFFSET)
+#define LCDC_HEOCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_HEOCFG0_BLENUV_OFFSET 6
+#define LCDC_HEOCFG0_BLENUV (0x3 << LCDC_HEOCFG0_BLENUV_OFFSET)
+#define LCDC_HEOCFG0_BLENUV_AHB_SINGLE (0x0 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR4 (0x1 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR8 (0x2 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR16 (0x3 << 6)
+#define LCDC_HEOCFG0_DLBO (0x1 << 8)
+#define LCDC_HEOCFG0_ROTDIS (0x1 << 12)
+#define LCDC_HEOCFG0_LOCKDIS (0x1 << 13)
+
+#define ATMEL_LCDC_HEOCFG1 0x02D0
+#define LCDC_HEOCFG1_CLUTEN (0x1 << 0)
+#define LCDC_HEOCFG1_YUVEN (0x1 << 1)
+#define LCDC_HEOCFG1_RGBMODE_OFFSET 4
+#define LCDC_HEOCFG1_RGBMODE (0xf << LCDC_HEOCFG1_RGBMODE_OFFSET)
+#define LCDC_HEOCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_HEOCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_HEOCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_HEOCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_HEOCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_HEOCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_HEOCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_HEOCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_HEOCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_HEOCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_HEOCFG1_CLUTMODE_OFFSET 8
+#define LCDC_HEOCFG1_CLUTMODE (0x3 << LCDC_HEOCFG1_CLUTMODE_OFFSET)
+#define LCDC_HEOCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_8BPP (0x3 << 8)
+#define LCDC_HEOCFG1_YUVMODE_OFFSET 12
+#define LCDC_HEOCFG1_YUVMODE (0xf << LCDC_HEOCFG1_YUVMODE_OFFSET)
+#define LCDC_HEOCFG1_YUVMODE_32BPP_AYCBCR (0x0 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE0 (0x1 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE1 (0x2 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE2 (0x3 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE3 (0x4 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_SEMIPLANAR (0x5 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_PLANAR (0x6 << 12)
+#define LCDC_HEOCFG1_YUVMODE_12BPP_YCBCR_SEMIPLANAR (0x7 << 12)
+#define LCDC_HEOCFG1_YUVMODE_12BPP_YCBCR_PLANAR (0x8 << 12)
+#define LCDC_HEOCFG1_YUV422ROT (0x1 << 16)
+#define LCDC_HEOCFG1_YUV422SWP (0x1 << 17)
+
+#define ATMEL_LCDC_HEOCFG2 0x02D4
+#define LCDC_HEOCFG2_XOFFSET_OFFSET 0
+#define LCDC_HEOCFG2_XOFFSET (0x7ff << LCDC_HEOCFG2_XOFFSET_OFFSET)
+#define LCDC_HEOCFG2_YOFFSET_OFFSET 16
+#define LCDC_HEOCFG2_YOFFSET (0x7ff << LCDC_HEOCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG3 0x02D8
+#define LCDC_HEOCFG3_XSIZE_OFFSET 0
+#define LCDC_HEOCFG3_XSIZE (0x7ff << LCDC_HEOCFG3_XSIZE_OFFSET)
+#define LCDC_HEOCFG3_YSIZE_OFFSET 16
+#define LCDC_HEOCFG3_YSIZE (0x7ff << LCDC_HEOCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG4 0x02DC
+#define LCDC_HEOCFG4_XMEM_SIZE_OFFSET 0
+#define LCDC_HEOCFG4_XMEM_SIZE (0x7ff << LCDC_HEOCFG4_XMEM_SIZE_OFFSET)
+#define LCDC_HEOCFG4_YMEM_SIZE_OFFSET 16
+#define LCDC_HEOCFG4_YMEM_SIZE (0x7ff << LCDC_HEOCFG4_YMEM_SIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG5 0x02E0
+
+#define ATMEL_LCDC_HEOCFG6 0x02E4
+
+#define ATMEL_LCDC_HEOCFG7 0x02E8
+
+#define ATMEL_LCDC_HEOCFG8 0x02EC
+
+#define ATMEL_LCDC_HEOCFG9 0x02F0
+#define LCDC_HEOCFG9_BDEF_OFFSET 0
+#define LCDC_HEOCFG9_BDEF (0xff << LCDC_HEOCFG9_BDEF_OFFSET)
+#define LCDC_HEOCFG9_GDEF_OFFSET 8
+#define LCDC_HEOCFG9_GDEF (0xff << LCDC_HEOCFG9_GDEF_OFFSET)
+#define LCDC_HEOCFG9_RDEF_OFFSET 16
+#define LCDC_HEOCFG9_RDEF (0xff << LCDC_HEOCFG9_RDEF_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG10 0x02F4
+#define LCDC_HEOCFG10_BKEY_OFFSET 0
+#define LCDC_HEOCFG10_BKEY (0xff << LCDC_HEOCFG10_BKEY_OFFSET)
+#define LCDC_HEOCFG10_GKEY_OFFSET 8
+#define LCDC_HEOCFG10_GKEY (0xff << LCDC_HEOCFG10_GKEY_OFFSET)
+#define LCDC_HEOCFG10_RKEY_OFFSET 16
+#define LCDC_HEOCFG10_RKEY (0xff << LCDC_HEOCFG10_RKEY_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG11 0x02F8
+#define LCDC_HEOCFG11_BMASK_OFFSET 0
+#define LCDC_HEOCFG11_BMASK (0xff << LCDC_HEOCFG11_BMASK_OFFSET)
+#define LCDC_HEOCFG11_GMASK_OFFSET 8
+#define LCDC_HEOCFG11_GMASK (0xff << LCDC_HEOCFG11_GMASK_OFFSET)
+#define LCDC_HEOCFG11_RMASK_OFFSET 16
+#define LCDC_HEOCFG11_RMASK (0xff << LCDC_HEOCFG11_RMASK_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG12 0x02FC
+#define LCDC_HEOCFG12_CRKEY (0x1 << 0)
+#define LCDC_HEOCFG12_INV (0x1 << 1)
+#define LCDC_HEOCFG12_ITER2BL (0x1 << 2)
+#define LCDC_HEOCFG12_ITER (0x1 << 3)
+#define LCDC_HEOCFG12_REVALPHA (0x1 << 4)
+#define LCDC_HEOCFG12_GAEN (0x1 << 5)
+#define LCDC_HEOCFG12_LAEN (0x1 << 6)
+#define LCDC_HEOCFG12_OVR (0x1 << 7)
+#define LCDC_HEOCFG12_DMA (0x1 << 8)
+#define LCDC_HEOCFG12_REP (0x1 << 9)
+#define LCDC_HEOCFG12_DSTKEY (0x1 << 10)
+#define LCDC_HEOCFG12_VIDPRI (0x1 << 12)
+#define LCDC_HEOCFG12_GA_OFFSET 16
+#define LCDC_HEOCFG12_GA (0xff << LCDC_HEOCFG12_GA_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG13 0x0300
+#define LCDC_HEOCFG13_XFACTOR_OFFSET 0
+#define LCDC_HEOCFG13_XFACTOR (0x1fff << LCDC_HEOCFG13_XFACTOR_OFFSET)
+#define LCDC_HEOCFG13_YFACTOR_OFFSET 16
+#define LCDC_HEOCFG13_YFACTOR (0x1fff << LCDC_HEOCFG13_YFACTOR_OFFSET)
+#define LCDC_HEOCFG13_SCALEN (0x1 << 31)
+
+#define ATMEL_LCDC_HEOCFG14 0x0304
+#define LCDC_HEOCFG14_CSCRY_OFFSET 0
+#define LCDC_HEOCFG14_CSCRY (0x3ff << LCDC_HEOCFG14_CSCRY_OFFSET)
+#define LCDC_HEOCFG14_CSCRU_OFFSET 10
+#define LCDC_HEOCFG14_CSCRU (0x3ff << LCDC_HEOCFG14_CSCRU_OFFSET)
+#define LCDC_HEOCFG14_CSCRV_OFFSET 20
+#define LCDC_HEOCFG14_CSCRV (0x3ff << LCDC_HEOCFG14_CSCRV_OFFSET)
+#define LCDC_HEOCFG14_CSCYOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HEOCFG15 0x0308
+#define LCDC_HEOCFG15_CSCGY_OFFSET 0
+#define LCDC_HEOCFG15_CSCGY (0x3ff << LCDC_HEOCFG15_CSCGY_OFFSET)
+#define LCDC_HEOCFG15_CSCGU_OFFSET 10
+#define LCDC_HEOCFG15_CSCGU (0x3ff << LCDC_HEOCFG15_CSCGU_OFFSET)
+#define LCDC_HEOCFG15_CSCGV_OFFSET 20
+#define LCDC_HEOCFG15_CSCGV (0x3ff << LCDC_HEOCFG15_CSCGV_OFFSET)
+#define LCDC_HEOCFG15_CSCUOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HEOCFG16 0x030C
+#define LCDC_HEOCFG16_CSCBY_OFFSET 0
+#define LCDC_HEOCFG16_CSCBY (0x3ff << LCDC_HEOCFG16_CSCBY_OFFSET)
+#define LCDC_HEOCFG16_CSCBU_OFFSET 10
+#define LCDC_HEOCFG16_CSCBU (0x3ff << LCDC_HEOCFG16_CSCBU_OFFSET)
+#define LCDC_HEOCFG16_CSCBV_OFFSET 20
+#define LCDC_HEOCFG16_CSCBV (0x3ff << LCDC_HEOCFG16_CSCBV_OFFSET)
+#define LCDC_HEOCFG16_CSCVOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HCRCHER 0x0340
+#define LCDC_HCRCHER_CHEN (0x1 << 0)
+#define LCDC_HCRCHER_UPDATEEN (0x1 << 1)
+#define LCDC_HCRCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_HCRCHDR 0x0344
+#define LCDC_HCRCHDR_CHDIS (0x1 << 0)
+#define LCDC_HCRCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_HCRCHSR 0x0348
+#define LCDC_HCRCHSR_CHSR (0x1 << 0)
+#define LCDC_HCRCHSR_UPDATESR (0x1 << 1)
+#define LCDC_HCRCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_HCRIER 0x034C
+#define LCDC_HCRIER_DMA (0x1 << 2)
+#define LCDC_HCRIER_DSCR (0x1 << 3)
+#define LCDC_HCRIER_ADD (0x1 << 4)
+#define LCDC_HCRIER_DONE (0x1 << 5)
+#define LCDC_HCRIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRIDR 0x0350
+#define LCDC_HCRIDR_DMA (0x1 << 2)
+#define LCDC_HCRIDR_DSCR (0x1 << 3)
+#define LCDC_HCRIDR_ADD (0x1 << 4)
+#define LCDC_HCRIDR_DONE (0x1 << 5)
+#define LCDC_HCRIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRIMR 0x0354
+#define LCDC_HCRIMR_DMA (0x1 << 2)
+#define LCDC_HCRIMR_DSCR (0x1 << 3)
+#define LCDC_HCRIMR_ADD (0x1 << 4)
+#define LCDC_HCRIMR_DONE (0x1 << 5)
+#define LCDC_HCRIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRISR 0x0358
+#define LCDC_HCRISR_DMA (0x1 << 2)
+#define LCDC_HCRISR_DSCR (0x1 << 3)
+#define LCDC_HCRISR_ADD (0x1 << 4)
+#define LCDC_HCRISR_DONE (0x1 << 5)
+#define LCDC_HCRISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRHEAD 0x035C
+
+#define ATMEL_LCDC_HCRADDR 0x0360
+
+#define ATMEL_LCDC_HCRCTRL 0x0364
+#define LCDC_HCRCTRL_DFETCH (0x1 << 0)
+#define LCDC_HCRCTRL_LFETCH (0x1 << 1)
+#define LCDC_HCRCTRL_DMAIEN (0x1 << 2)
+#define LCDC_HCRCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_HCRCTRL_ADDIEN (0x1 << 4)
+#define LCDC_HCRCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HCRNEXT 0x0368
+
+#define ATMEL_LCDC_HCRCFG0 0x036C
+#define LCDC_HCRCFG0_BLEN_OFFSET 4
+#define LCDC_HCRCFG0_BLEN (0x3 << LCDC_HCRCFG0_BLEN_OFFSET)
+#define LCDC_HCRCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_HCRCFG0_DLBO (0x1 << 8)
+
+#define ATMEL_LCDC_HCRCFG1 0x0370
+#define LCDC_HCRCFG1_CLUTEN (0x1 << 0)
+#define LCDC_HCRCFG1_RGBMODE_OFFSET 4
+#define LCDC_HCRCFG1_RGBMODE (0xf << LCDC_HCRCFG1_RGBMODE_OFFSET)
+#define LCDC_HCRCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_HCRCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_HCRCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_HCRCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_HCRCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_HCRCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_HCRCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_HCRCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_HCRCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_HCRCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_HCRCFG1_CLUTMODE_OFFSET 8
+#define LCDC_HCRCFG1_CLUTMODE (0x3 << LCDC_HCRCFG1_CLUTMODE_OFFSET)
+#define LCDC_HCRCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_HCRCFG2 0x0374
+#define LCDC_HCRCFG2_XOFFSET_OFFSET 0
+#define LCDC_HCRCFG2_XOFFSET (0x7ff << LCDC_HCRCFG2_XOFFSET_OFFSET)
+#define LCDC_HCRCFG2_YOFFSET_OFFSET 16
+#define LCDC_HCRCFG2_YOFFSET (0x7ff << LCDC_HCRCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG3 0x0378
+#define LCDC_HCRCFG3_XSIZE_OFFSET 0
+#define LCDC_HCRCFG3_XSIZE (0x7f << LCDC_HCRCFG3_XSIZE_OFFSET)
+#define LCDC_HCRCFG3_YSIZE_OFFSET 16
+#define LCDC_HCRCFG3_YSIZE (0x7f << LCDC_HCRCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG4 0x037C
+
+#define ATMEL_LCDC_HCRCFG6 0x0384
+#define LCDC_HCRCFG6_BDEF_OFFSET 0
+#define LCDC_HCRCFG6_BDEF (0xff << LCDC_HCRCFG6_BDEF_OFFSET)
+#define LCDC_HCRCFG6_GDEF_OFFSET 8
+#define LCDC_HCRCFG6_GDEF (0xff << LCDC_HCRCFG6_GDEF_OFFSET)
+#define LCDC_HCRCFG6_RDEF_OFFSET 16
+#define LCDC_HCRCFG6_RDEF (0xff << LCDC_HCRCFG6_RDEF_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG7 0x0388
+#define LCDC_HCRCFG7_BKEY_OFFSET 0
+#define LCDC_HCRCFG7_BKEY (0xff << LCDC_HCRCFG7_BKEY_OFFSET)
+#define LCDC_HCRCFG7_GKEY_OFFSET 8
+#define LCDC_HCRCFG7_GKEY (0xff << LCDC_HCRCFG7_GKEY_OFFSET)
+#define LCDC_HCRCFG7_RKEY_OFFSET 16
+#define LCDC_HCRCFG7_RKEY (0xff << LCDC_HCRCFG7_RKEY_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG8 0x038C
+#define LCDC_HCRCFG8_BMASK_OFFSET 0
+#define LCDC_HCRCFG8_BMASK (0xff << LCDC_HCRCFG8_BMASK_OFFSET)
+#define LCDC_HCRCFG8_GMASK_OFFSET 8
+#define LCDC_HCRCFG8_GMASK (0xff << LCDC_HCRCFG8_GMASK_OFFSET)
+#define LCDC_HCRCFG8_RMASK_OFFSET 16
+#define LCDC_HCRCFG8_RMASK (0xff << LCDC_HCRCFG8_RMASK_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG9 0x0390
+#define LCDC_HCRCFG9_CRKEY (0x1 << 0)
+#define LCDC_HCRCFG9_INV (0x1 << 1)
+#define LCDC_HCRCFG9_ITER2BL (0x1 << 2)
+#define LCDC_HCRCFG9_ITER (0x1 << 3)
+#define LCDC_HCRCFG9_REVALPHA (0x1 << 4)
+#define LCDC_HCRCFG9_GAEN (0x1 << 5)
+#define LCDC_HCRCFG9_LAEN (0x1 << 6)
+#define LCDC_HCRCFG9_OVR (0x1 << 7)
+#define LCDC_HCRCFG9_DMA (0x1 << 8)
+#define LCDC_HCRCFG9_REP (0x1 << 9)
+#define LCDC_HCRCFG9_DSTKEY (0x1 << 10)
+#define LCDC_HCRCFG9_GA_OFFSET 16
+#define LCDC_HCRCFG9_GA_Msk (0xff << LCDC_HCRCFG9_GA_OFFSET)
+
+#define ATMEL_LCDC_BASECLUT 0x400
+#define ATMEL_LCDC2_BASECLUT 0x600
+#define LCDC_BASECLUT_BCLUT_OFFSET 0
+#define LCDC_BASECLUT_BCLUT (0xff << LCDC_BASECLUT_BCLUT_OFFSET)
+#define LCDC_BASECLUT_GCLUT_OFFSET 8
+#define LCDC_BASECLUT_GCLUT (0xff << LCDC_BASECLUT_GCLUT_OFFSET)
+#define LCDC_BASECLUT_RCLUT_OFFSET 16
+#define LCDC_BASECLUT_RCLUT (0xff << LCDC_BASECLUT_RCLUT_OFFSET)
+
+#define ATMEL_LCDC_OVR1CLUT 0x800
+#define ATMEL_LCDC2_OVR1CLUT 0xa00
+#define LCDC_OVR1CLUT_BCLUT_OFFSET 0
+#define LCDC_OVR1CLUT_BCLUT (0xff << LCDC_OVR1CLUT_BCLUT_OFFSET)
+#define LCDC_OVR1CLUT_GCLUT_OFFSET 8
+#define LCDC_OVR1CLUT_GCLUT (0xff << LCDC_OVR1CLUT_GCLUT_OFFSET)
+#define LCDC_OVR1CLUT_RCLUT_OFFSET 16
+#define LCDC_OVR1CLUT_RCLUT (0xff << LCDC_OVR1CLUT_RCLUT_OFFSET)
+#define LCDC_OVR1CLUT_ACLUT_OFFSET 24
+#define LCDC_OVR1CLUT_ACLUT (0xff << LCDC_OVR1CLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_OVR2CLUT 0xe00
+#define LCDC_OVR2CLUT_BCLUT_OFFSET 0
+#define LCDC_OVR2CLUT_BCLUT (0xff << LCDC_OVR2CLUT_BCLUT_OFFSET)
+#define LCDC_OVR2CLUT_GCLUT_OFFSET 8
+#define LCDC_OVR2CLUT_GCLUT (0xff << LCDC_OVR2CLUT_GCLUT_OFFSET)
+#define LCDC_OVR2CLUT_RCLUT_OFFSET 16
+#define LCDC_OVR2CLUT_RCLUT (0xff << LCDC_OVR2CLUT_RCLUT_OFFSET)
+#define LCDC_OVR2CLUT_ACLUT_OFFSET 24
+#define LCDC_OVR2CLUT_ACLUT (0xff << LCDC_OVR2CLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_HEOCLUT 0x1000
+#define ATMEL_LCDC2_HEOCLUT 0x1200
+#define LCDC_HEOCLUT_BCLUT_OFFSET 0
+#define LCDC_HEOCLUT_BCLUT (0xff << LCDC_HEOCLUT_BCLUT_OFFSET)
+#define LCDC_HEOCLUT_GCLUT_OFFSET 8
+#define LCDC_HEOCLUT_GCLUT (0xff << LCDC_HEOCLUT_GCLUT_OFFSET)
+#define LCDC_HEOCLUT_RCLUT_OFFSET 16
+#define LCDC_HEOCLUT_RCLUT (0xff << LCDC_HEOCLUT_RCLUT_OFFSET)
+#define LCDC_HEOCLUT_ACLUT_OFFSET 24
+#define LCDC_HEOCLUT_ACLUT (0xff << LCDC_HEOCLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_HCRCLUT 0x1400
+#define ATMEL_LCDC2_HCRCLUT 0x1600
+#define LCDC_HCRCLUT_BCLUT_OFFSET 0
+#define LCDC_HCRCLUT_BCLUT (0xff << LCDC_HCRCLUT_BCLUT_OFFSET)
+#define LCDC_HCRCLUT_GCLUT_OFFSET 8
+#define LCDC_HCRCLUT_GCLUT (0xff << LCDC_HCRCLUT_GCLUT_OFFSET)
+#define LCDC_HCRCLUT_RCLUT_OFFSET 16
+#define LCDC_HCRCLUT_RCLUT (0xff << LCDC_HCRCLUT_RCLUT_OFFSET)
+#define LCDC_HCRCLUT_ACLUT_OFFSET 24
+#define LCDC_HCRCLUT_ACLUT (0xff << LCDC_HCRCLUT_ACLUT_OFFSET)
+
+/* Base layer CLUT */
+#define ATMEL_HLCDC_LUT 0x0400
+
+
+static inline void hlcdc_write(struct drm_device *dev, u32 reg, u32 data)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ iowrite32(data, priv->mmio + reg);
+}
+
+static inline u32 hlcdc_read(struct drm_device *dev, u32 reg)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ return ioread32(priv->mmio + reg);
+}
+
+#endif /* __ATMEL_HLCDC4_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
new file mode 100644
index 0000000..143ba72
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
@@ -0,0 +1,92 @@
+/*
+ * atmel_hlcdc_backlight.c -- Backlight driver for the atmel HLCDC controller
+ *
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+
+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
+
+
+static int get_brightness(struct backlight_device *backlight)
+{
+ struct drm_device *dev = bl_get_data(backlight);
+
+ return (hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & LCDC_LCDCFG6_PWMCVAL)
+ >> LCDC_LCDCFG6_PWMCVAL_OFFSET;
+}
+
+static int update_status(struct backlight_device *backlight)
+{
+ struct drm_device *dev = bl_get_data(backlight);
+ int brightness = backlight->props.brightness;
+ u32 reg;
+
+ if (backlight->props.power != FB_BLANK_UNBLANK ||
+ backlight->props.state & BL_CORE_SUSPENDED)
+ brightness = 0;
+
+ reg = hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & ~LCDC_LCDCFG6_PWMCVAL;
+ reg |= brightness << LCDC_LCDCFG6_PWMCVAL_OFFSET;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, reg);
+ DBG("new brightness is : %d\n", get_brightness(backlight));
+ return 0;
+}
+
+
+
+static const struct backlight_ops atmel_drm_backlight_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = update_status,
+ .get_brightness = get_brightness,
+};
+
+int atmel_drm_backlight_init(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct backlight_device *backlight;
+
+ backlight = backlight_device_register("backlight", dev->dev, dev,
+ &atmel_drm_backlight_ops , NULL);
+ if (IS_ERR(backlight)) {
+ dev_err(dev->dev, "unable to register backlight device: %ld\n",
+ PTR_ERR(backlight));
+ return PTR_ERR(backlight);
+ }
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
+ (ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
+
+ backlight->props.max_brightness = 0xFF;
+ backlight->props.brightness = get_brightness(backlight);
+ backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(backlight);
+
+ priv->backlight = backlight;
+
+ return 0;
+}
+
+void atmel_drm_backlight_exit(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+
+ backlight_device_unregister(priv->backlight);
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
new file mode 100644
index 0000000..6a99101
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_BACKLIGHT_H__
+#define __ATMEL_HLCDC_BACKLIGHT_H__
+
+int atmel_drm_backlight_init(struct drm_device *dev);
+void atmel_drm_backlight_exit(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
new file mode 100644
index 0000000..649fa19
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
@@ -0,0 +1,702 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "drm_flip_work.h"
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+#include "atmel_hlcdc_ovl.h"
+
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+
+
+struct atmel_hlcd_dma_desc {
+ u32 address;
+ u32 control;
+ u32 next;
+ u32 dummy; /* for 64-bit alignment */
+};
+
+enum {
+ DMA_BASE = 0,
+ DMA_OVR_1,
+ DMA_OVR_2,
+ DMA_HEO,
+ DMA_HCR,
+ DMA_PP,
+ DMA_MAX
+};
+
+struct atmel_hlcdc_crtc {
+ struct drm_crtc base;
+ uint32_t dirty;
+ dma_addr_t start, end;
+ struct drm_pending_vblank_event *event;
+ int dpms;
+
+ struct atmel_hlcd_dma_desc *dma_descs[DMA_MAX];
+ dma_addr_t dma_descs_phys[DMA_MAX];
+
+ /* fb currently set to scanout 0/1: */
+ struct drm_framebuffer *fb;
+
+ /* for deferred fb unref's: */
+ struct drm_flip_work unref_work;
+#ifdef USE_LUT
+ u8 lut_r[256], lut_g[256], lut_b[256];
+#endif
+};
+#define to_atmel_hlcdc_crtc(x) container_of(x, struct atmel_hlcdc_crtc, base)
+
+static void unref_worker(struct drm_flip_work *work, void *val)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc =
+ container_of(work, struct atmel_hlcdc_crtc, unref_work);
+ struct drm_device *dev = atmel_hlcdc_crtc->base.dev;
+
+ mutex_lock(&dev->mode_config.mutex);
+ drm_framebuffer_unreference(val);
+ mutex_unlock(&dev->mode_config.mutex);
+}
+
+static void update_scanout(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+
+ struct drm_gem_cma_object *gem;
+ struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
+ unsigned int depth, bpp;
+ dma_addr_t start;
+ dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
+
+ drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
+ gem = drm_fb_cma_get_gem_obj(fb, 0);
+
+ start = gem->paddr + fb->offsets[0] +
+ (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
+
+ if (hlcdc_crtc->fb != fb) {
+ struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
+ drm_framebuffer_reference(fb);
+ hlcdc_crtc->fb = fb;
+ if (oldfb) {
+ drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
+ drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
+ }
+ }
+
+ if (desc->address != start) {
+ desc->address = start;
+ desc->next = desc_phys;
+ desc->control = LCDC_OVRCTRL_DFETCH;
+ }
+
+ if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
+ hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
+ hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
+ }
+}
+
+static void start(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
+ cpu_relax();
+}
+
+static void stop(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+
+ /* Disable DISP signal */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
+ cpu_relax();
+ /* Disable synchronization */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
+ cpu_relax();
+ /* Disable pixel clock */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
+ cpu_relax();
+ /* Disable PWM */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
+ cpu_relax();
+}
+
+static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
+
+ drm_crtc_cleanup(crtc);
+ drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
+
+ if (atmel_hlcdc_crtc->dma_descs[0])
+ dma_free_writecombine(dev->dev,
+ sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
+ atmel_hlcdc_crtc->dma_descs[0],
+ atmel_hlcdc_crtc->dma_descs_phys[0]);
+ kfree(atmel_hlcdc_crtc);
+}
+
+static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t page_flip_flags)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ if (atmel_hlcdc_crtc->event) {
+ dev_err(dev->dev, "already pending page flip!\n");
+ return -EBUSY;
+ }
+
+ crtc->fb = fb;
+ atmel_hlcdc_crtc->event = event;
+ update_scanout(crtc);
+ return 0;
+}
+
+static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ /* we really only care about on or off: */
+ if (mode != DRM_MODE_DPMS_ON)
+ mode = DRM_MODE_DPMS_OFF;
+
+ if (atmel_hlcdc_crtc->dpms == mode)
+ return;
+
+ atmel_hlcdc_crtc->dpms = mode;
+
+ pm_runtime_get_sync(dev->dev);
+
+ if (mode == DRM_MODE_DPMS_ON) {
+ pm_runtime_forbid(dev->dev);
+ start(crtc);
+ } else {
+ stop(crtc);
+ pm_runtime_allow(dev->dev);
+ }
+
+ pm_runtime_put_sync(dev->dev);
+}
+
+static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
+{
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
+{
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
+{
+ u32 value = 0;
+
+ switch (depth) {
+ case 1:
+ value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 2:
+ value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 4:
+ value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 8:
+ value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 12:
+ value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
+ break;
+ case 16:
+ value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
+ break;
+ case 18:
+ value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
+ break;
+ case 24:
+ value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
+ break;
+ case 32:
+ value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
+ break;
+ default:
+ dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
+ depth, bpp);
+ break;
+ }
+
+ return value;
+}
+
+
+void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ unsigned long value;
+ unsigned long clk_value_khz;
+
+ if (clock == 0)
+ clock = crtc->mode.clock;
+
+ pm_runtime_get_sync(dev->dev);
+
+ clk_value_khz = clk_get_rate(priv->clk) / 1000;
+
+ value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
+
+ if (value < 1) {
+ dev_notice(dev->dev, "using system clock as pixel clock\n");
+ value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
+ } else {
+ dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
+ clk_value_khz / value);
+ value = value - 2;
+ dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
+ value);
+ value = LCDC_LCDCFG0_CLKPWMSEL |
+ (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
+ | LCDC_LCDCFG0_CGDISBASE;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
+ }
+
+ pm_runtime_put_sync(dev->dev);
+}
+
+static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ int dpms = atmel_hlcdc_crtc->dpms;
+ int hbp, hfp, hsw, vbp, vfp, vsw;
+ unsigned int depth, bpp;
+ unsigned long value;
+ int ret;
+
+ ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
+ if (WARN_ON(ret))
+ return ret;
+
+ pm_runtime_get_sync(dev->dev);
+
+ if (dpms == DRM_MODE_DPMS_ON)
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+
+ dev_dbg(dev->dev, "%s:\n", __func__);
+
+
+ /* Set pixel clock */
+ atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
+
+ /* Initialize control register 5 */
+ value = priv->default_lcdcfg5;
+ value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
+ | LCDC_LCDCFG5_DISPDLY
+ | LCDC_LCDCFG5_VSPDLYS;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ value |= LCDC_LCDCFG5_HSPOL;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ value |= LCDC_LCDCFG5_VSPOL;
+
+ dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
+
+
+ /* Configure timings: */
+ hbp = MAX(mode->htotal - mode->hsync_end, 1);
+ hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
+ hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
+ vbp = MAX(mode->vtotal - mode->vsync_end, 0);
+ vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
+ vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
+
+ DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
+ mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
+
+ /* Vertical & Horizontal Timing */
+ value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
+ value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
+
+ value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
+ value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
+
+ value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
+ value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
+
+ /* Display size */
+ value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
+ value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
+
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
+ LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
+
+ drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
+ atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
+
+ /* Disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, ~0UL);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, ~0UL);
+ /* Enable BASE LAYER overflow interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
+ /* Enable FIFO error interrupt and the global BASE LAYER interrupt*/
+ hlcdc_write(dev, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
+ LCDC_LCDIER_BASEIE);
+
+
+ update_scanout(crtc);
+
+ atmel_hlcdc_crtc_dpms(crtc, dpms);
+
+ pm_runtime_put_sync(dev->dev);
+ return 0;
+}
+
+static int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ update_scanout(crtc);
+ return 0;
+}
+
+#ifdef USE_LUT
+static void atmel_hlcdc_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ int i;
+
+ if (!crtc->enabled)
+ return;
+
+ for (i = 0; i < 256; i++)
+ hlcdc_write(dev, ATMEL_HLCDC_LUT + (i*4),
+ (atmel_hlcdc_crtc->lut_r[i] << 16) |
+ (atmel_hlcdc_crtc->lut_g[i] << 8) |
+ (atmel_hlcdc_crtc->lut_b[i] << 0));
+}
+void atmel_hlcdc_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+ u16 blue, int regno)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+
+ atmel_hlcdc_crtc->lut_r[regno] = red;
+ atmel_hlcdc_crtc->lut_g[regno] = green;
+ atmel_hlcdc_crtc->lut_b[regno] = blue;
+}
+
+void atmel_hlcdc_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+
+ *red = atmel_hlcdc_crtc->lut_r[regno];
+ *green = atmel_hlcdc_crtc->lut_g[regno];
+ *blue = atmel_hlcdc_crtc->lut_b[regno];
+}
+#endif
+
+static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
+ .destroy = atmel_hlcdc_crtc_destroy,
+ .set_config = drm_crtc_helper_set_config,
+ .page_flip = atmel_hlcdc_crtc_page_flip,
+};
+
+static const struct drm_crtc_helper_funcs atmel_hlcdc_crtc_helper_funcs = {
+ .dpms = atmel_hlcdc_crtc_dpms,
+ .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
+ .prepare = atmel_hlcdc_crtc_prepare,
+ .commit = atmel_hlcdc_crtc_commit,
+ .mode_set = atmel_hlcdc_crtc_mode_set,
+ .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
+#ifdef USE_LUT
+ .load_lut = atmel_hlcdc_crtc_load_lut,
+#endif
+};
+
+int atmel_hlcdc_crtc_mode_valid(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
+{
+ struct atmel_hlcdc_drm_private *priv = crtc->dev->dev_private;
+ uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
+
+ /*
+ * check to see if the width is within the range that
+ * the LCD Controller physically supports
+ */
+ if (mode->hdisplay > 2048)
+ return MODE_VIRTUAL_X;
+
+ /* width must be multiple of 4 */
+ if (mode->hdisplay & 0x3)
+ return MODE_VIRTUAL_X;
+
+ if (mode->vdisplay > 2048)
+ return MODE_VIRTUAL_Y;
+
+ DBG("Processing mode %dx%d@%d with pixel clock %d",
+ mode->hdisplay, mode->vdisplay,
+ drm_mode_vrefresh(mode), mode->clock);
+
+ hbp = mode->htotal - mode->hsync_end;
+ hfp = mode->hsync_start - mode->hdisplay;
+ hsw = mode->hsync_end - mode->hsync_start;
+ vbp = mode->vtotal - mode->vsync_end;
+ vfp = mode->vsync_start - mode->vdisplay;
+ vsw = mode->vsync_end - mode->vsync_start;
+
+ if ((hbp-1) > 0x1ff) {
+ DBG("Pruning mode: Horizontal Back Porch out of range");
+ return MODE_HBLANK_WIDE;
+ }
+
+ if ((hfp-1) > 0x1ff) {
+ DBG("Pruning mode: Horizontal Front Porch out of range");
+ return MODE_HBLANK_WIDE;
+ }
+
+ if ((hsw-1) > 0x3f) {
+ DBG("Pruning mode: Horizontal Sync Width out of range");
+ return MODE_HSYNC_WIDE;
+ }
+
+ if (vbp > 0x3f) {
+ DBG("Pruning mode: Vertical Back Porch out of range");
+ return MODE_VBLANK_WIDE;
+ }
+
+ if ((vfp - 1) > 0x3f) {
+ DBG("Pruning mode: Vertical Front Porch out of range");
+ return MODE_VBLANK_WIDE;
+ }
+
+ if ((vsw - 1) > 0x3f) {
+ DBG("Pruning mode: Vertical Sync Width out of range");
+ return MODE_VSYNC_WIDE;
+ }
+
+ /*
+ * some devices have a maximum allowed pixel clock
+ * configured from the DT
+ */
+ if (mode->clock > priv->max_pixelclock) {
+ DBG("Pruning mode: pixel clock too high");
+ return MODE_CLOCK_HIGH;
+ }
+
+ return MODE_OK;
+}
+
+irqreturn_t handle_base_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_LCDISR) &
+ hlcdc_read(dev, ATMEL_LCDC_LCDIMR);
+
+ if (status & LCDC_BASEISR_OVR)
+ dev_warn(dev->dev, "base layer overflow %#x\n", status);
+
+ if (status)
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
+}
+irqreturn_t handle_ovr_irq(struct drm_device *dev, int id)
+{
+ uint32_t status = hlcdc_ovl_read(dev, id, ATMEL_LCDC_OVRISR) &
+ hlcdc_ovl_read(dev, id, ATMEL_LCDC_OVRIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_heo_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_HEOISR) &
+ hlcdc_read(dev, ATMEL_LCDC_HEOIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_hcr_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_HCRISR) &
+ hlcdc_read(dev, ATMEL_LCDC_HCRIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_pp_irq(struct drm_device *dev)
+{
+ return IRQ_NONE;
+}
+
+irqreturn_t atmel_hlcdc_crtc_irq(struct drm_crtc *crtc)
+{
+ uint32_t status;
+ struct drm_device *dev = crtc->dev;
+
+ status = hlcdc_read(dev, ATMEL_LCDC_LCDISR) &
+ hlcdc_read(dev, ATMEL_LCDC_LCDIMR);
+ if (!status) {
+ dev_warn(dev->dev, "spurious interrupt!\n");
+ return IRQ_NONE;
+ }
+
+ if (status & LCDC_LCDISR_BASE)
+ handle_base_irq(dev);
+ if (status & LCDC_LCDISR_OVR1)
+ handle_ovr_irq(dev, 0);
+ if (status & LCDC_LCDISR_OVR2)
+ handle_ovr_irq(dev, 1);
+ if (status & LCDC_LCDISR_HEO)
+ handle_heo_irq(dev);
+ if (status & LCDC_LCDISR_HCR)
+ handle_hcr_irq(dev);
+ if (status & LCDC_LCDISR_PP)
+ handle_pp_irq(dev);
+
+ if (status & LCDC_LCDISR_FIFOERR)
+ dev_warn(dev->dev, "FIFO underflow %#x\n", status);
+
+ return IRQ_HANDLED;
+}
+
+void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *crtc,
+ struct drm_file *file)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_pending_vblank_event *event;
+ struct drm_device *dev = crtc->dev;
+ unsigned long flags;
+
+ /* Destroy the pending vertical blanking event associated with the
+ * pending page flip, if any, and disable vertical blanking interrupts.
+ */
+ spin_lock_irqsave(&dev->event_lock, flags);
+ event = atmel_hlcdc_crtc->event;
+ if (event && event->base.file_priv == file) {
+ atmel_hlcdc_crtc->event = NULL;
+ event->base.destroy(&event->base);
+ drm_vblank_put(dev, 0);
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+struct drm_crtc *atmel_hlcdc_crtc_create(struct drm_device *dev)
+{
+ int i;
+ struct atmel_hlcdc_crtc *hlcdc;
+ struct drm_crtc *crtc;
+ int ret;
+
+ hlcdc = kzalloc(sizeof(struct atmel_hlcdc_crtc), GFP_KERNEL);
+ if (!hlcdc) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ crtc = &hlcdc->base;
+
+ hlcdc->dpms = DRM_MODE_DPMS_OFF;
+
+ hlcdc->dma_descs[0] = dma_alloc_writecombine(dev->dev,
+ sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
+ &(hlcdc->dma_descs_phys[0]),
+ GFP_KERNEL);
+ for (i = 1; i < DMA_MAX; i++) {
+ hlcdc->dma_descs[i] = hlcdc->dma_descs[0] + i;
+ hlcdc->dma_descs_phys[i] = hlcdc->dma_descs_phys[0] +
+ (i * sizeof(struct atmel_hlcd_dma_desc));
+ hlcdc->dma_descs[i]->address = 0;
+ hlcdc->dma_descs[i]->control = 0;
+ hlcdc->dma_descs[i]->next = 0;
+ }
+
+ ret = drm_flip_work_init(&hlcdc->unref_work, 16,
+ "unref", unref_worker);
+ if (ret) {
+ dev_err(dev->dev, "could not allocate unref FIFO\n");
+ goto fail;
+ }
+
+ ret = drm_crtc_init(dev, crtc, &atmel_hlcdc_crtc_funcs);
+ if (ret < 0)
+ goto fail;
+
+ drm_crtc_helper_add(crtc, &atmel_hlcdc_crtc_helper_funcs);
+
+ return crtc;
+
+fail:
+ atmel_hlcdc_crtc_destroy(crtc);
+ return NULL;
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
new file mode 100644
index 0000000..c8aedc8
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
@@ -0,0 +1,586 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+#include "atmel_hlcdc_ovl.h"
+#include "atmel_hlcdc_panel.h"
+#include "atmel_hlcdc_backlight.h"
+
+#include "drm_fb_helper.h"
+
+static LIST_HEAD(module_list);
+static bool slave_probing;
+
+void atmel_hlcdc_module_init(struct atmel_hlcdc_module *mod, const char *name,
+ const struct atmel_hlcdc_module_ops *funcs)
+{
+ mod->name = name;
+ mod->funcs = funcs;
+ INIT_LIST_HEAD(&mod->list);
+ list_add(&mod->list, &module_list);
+}
+
+void atmel_hlcdc_module_cleanup(struct atmel_hlcdc_module *mod)
+{
+ list_del(&mod->list);
+}
+
+void atmel_hlcdc_slave_probedefer(bool defered)
+{
+ slave_probing = defered;
+}
+
+static struct of_device_id atmel_hlcdc_of_match[];
+
+static struct drm_framebuffer *atmel_hlcdc_fb_create(struct drm_device *dev,
+ struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd)
+{
+ return drm_fb_cma_create(dev, file_priv, mode_cmd);
+}
+
+static void atmel_hlcdc_fb_output_poll_changed(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+
+ if (priv->fbdev)
+ drm_fbdev_cma_hotplug_event(priv->fbdev);
+}
+
+static const struct drm_mode_config_funcs mode_config_funcs = {
+ .fb_create = atmel_hlcdc_fb_create,
+ .output_poll_changed = atmel_hlcdc_fb_output_poll_changed,
+};
+
+static int modeset_init(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct atmel_hlcdc_module *mod;
+
+ atmel_drm_backlight_init(dev);
+
+ drm_mode_config_init(dev);
+
+ priv->crtc = atmel_hlcdc_crtc_create(dev);
+
+ list_for_each_entry(mod, &module_list, list) {
+ DBG("loading module: %s", mod->name);
+ mod->funcs->modeset_init(mod, dev);
+ }
+
+ if ((priv->num_encoders == 0) || (priv->num_connectors == 0)) {
+ /* oh nos! */
+ dev_err(dev->dev, "no encoders/connectors found\n");
+ return -ENXIO;
+ }
+
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+ dev->mode_config.funcs = &mode_config_funcs;
+ return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct atmel_hlcdc_drm_private *priv = container_of(nb,
+ struct atmel_hlcdc_drm_private, freq_transition);
+
+ if (val == CPUFREQ_POSTCHANGE) {
+ if (priv->lcd_fck_rate != clk_get_rate(priv->clk)) {
+ priv->lcd_fck_rate = clk_get_rate(priv->clk);
+ atmel_hlcdc_crtc_update_clk(priv->crtc, 0);
+ }
+ }
+
+ return 0;
+}
+#endif
+
+/*
+ * DRM operations:
+ */
+
+static int atmel_hlcdc_unload(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct atmel_hlcdc_module *mod, *cur;
+
+ drm_kms_helper_poll_fini(dev);
+ drm_mode_config_cleanup(dev);
+ drm_vblank_cleanup(dev);
+
+ pm_runtime_get_sync(dev->dev);
+ drm_irq_uninstall(dev);
+ pm_runtime_put_sync(dev->dev);
+
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_unregister_notifier(&priv->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+ if (priv->clk)
+ clk_put(priv->clk);
+
+ if (priv->mmio)
+ iounmap(priv->mmio);
+
+ flush_workqueue(priv->wq);
+ destroy_workqueue(priv->wq);
+
+ dev->dev_private = NULL;
+
+ pm_runtime_disable(dev->dev);
+
+ list_for_each_entry_safe(mod, cur, &module_list, list) {
+ DBG("destroying module: %s", mod->name);
+ mod->funcs->destroy(mod);
+ }
+
+ kfree(priv);
+
+ return 0;
+}
+
+static int atmel_hlcdc_load(struct drm_device *dev, unsigned long flags)
+{
+ struct platform_device *pdev = dev->platformdev;
+ struct device_node *node = pdev->dev.of_node;
+ struct atmel_hlcdc_drm_private *priv;
+ struct atmel_hlcdc_module *mod;
+ struct resource *res;
+ u32 bpp = 0;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(dev->dev, "failed to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dev->dev_private = priv;
+
+ priv->wq = alloc_ordered_workqueue("atmel_hlcdc", 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev->dev, "failed to get memory resource\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ priv->mmio = ioremap_nocache(res->start, resource_size(res));
+ if (!priv->mmio) {
+ dev_err(dev->dev, "failed to ioremap\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ priv->clk = clk_get(dev->dev, "lcdc_clk");
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev->dev, "failed to get lcd clock\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+ clk_prepare_enable(priv->clk);
+
+ priv->bus_clk = clk_get(dev->dev, "bus_clk");
+ if (IS_ERR(priv->bus_clk)) {
+ dev_dbg(dev->dev, "no bus clock defined.\n");
+ priv->bus_clk = NULL;
+ }
+ if (priv->bus_clk)
+ clk_prepare_enable(priv->bus_clk);
+
+#ifdef CONFIG_CPU_FREQ
+ priv->lcd_fck_rate = clk_get_rate(priv->clk);
+ priv->freq_transition.notifier_call = cpufreq_transition;
+ ret = cpufreq_register_notifier(&priv->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (ret) {
+ dev_err(dev->dev, "failed to register cpufreq notifier\n");
+ goto fail;
+ }
+#endif
+
+ if (of_property_read_u32(node, "default-lcdcfg5",
+ &priv->default_lcdcfg5))
+ priv->default_lcdcfg5 = LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
+
+ DBG("LCDCFG5 default value 0x%x", priv->default_lcdcfg5);
+
+ if (of_property_read_u32(node, "guard-time", &priv->guard_time))
+ priv->guard_time = 9;
+
+ DBG("Guard time Value 0x%x", priv->guard_time);
+
+ if (of_property_read_u32(node, "hlcdc,max-pixelclock",
+ &priv->max_pixelclock))
+ priv->max_pixelclock = ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK;
+
+ DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
+
+ pm_runtime_enable(dev->dev);
+
+ ret = modeset_init(dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to initialize mode setting\n");
+ goto fail;
+ }
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to initialize vblank\n");
+ goto fail;
+ }
+
+ pm_runtime_get_sync(dev->dev);
+ ret = drm_irq_install(dev);
+ pm_runtime_put_sync(dev->dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to install IRQ handler\n");
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ list_for_each_entry(mod, &module_list, list) {
+ DBG("%s: preferred_bpp: %d", mod->name, mod->preferred_bpp);
+ bpp = mod->preferred_bpp;
+ if (bpp > 0)
+ break;
+ }
+
+ priv->fbdev = drm_fbdev_cma_init(dev, bpp,
+ dev->mode_config.num_crtc,
+ dev->mode_config.num_connector);
+ drm_kms_helper_poll_init(dev);
+
+ return 0;
+
+fail:
+ atmel_hlcdc_unload(dev);
+ return ret;
+}
+
+static void atmel_hlcdc_preclose(struct drm_device *dev, struct drm_file *file)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ atmel_hlcdc_crtc_cancel_page_flip(priv->crtc, file);
+}
+
+static void atmel_hlcdc_lastclose(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ drm_fbdev_cma_restore_mode(priv->fbdev);
+}
+
+static irqreturn_t atmel_hlcdc_irq(int irq, void *arg)
+{
+ struct drm_device *dev = arg;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ return atmel_hlcdc_crtc_irq(priv->crtc);
+}
+
+static void atmel_hlcdc_irq_preinstall(struct drm_device *dev)
+{
+ /* disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HEOIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 0, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 1, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ /* read the IQR to clear all bits */
+ hlcdc_read(dev, ATMEL_LCDC_LCDISR);
+}
+
+static int atmel_hlcdc_irq_postinstall(struct drm_device *dev)
+{
+ /* enable FIFO underflow irq: */
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
+ hlcdc_write(dev, ATMEL_LCDC_LCDIER,
+ LCDC_LCDISR_BASE | LCDC_LCDISR_FIFOERR);
+
+ return 0;
+}
+
+static void atmel_hlcdc_irq_uninstall(struct drm_device *dev)
+{
+ /* disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HEOIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 0, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 1, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+}
+
+static int atmel_hlcdc_enable_vblank(struct drm_device *dev, int crtc)
+{
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_LCDIER_SOFIE);
+ return 0;
+}
+
+static void atmel_hlcdc_disable_vblank(struct drm_device *dev, int crtc)
+{
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_LCDIER_SOFIE);
+}
+
+
+
+#if defined(CONFIG_DEBUG_FS)
+enum reg_type {
+ RW, /* normal (read write at the same address) */
+ CS, /* 'set', 'clear' and 'read' are consecutive registers */
+};
+
+static const struct {
+ const char *name;
+ uint32_t reg;
+ enum reg_type type;
+} registers[] = {
+#define REG(type, reg) { #reg, reg, type }
+ REG(RW, ATMEL_LCDC_LCDCFG0),
+ REG(RW, ATMEL_LCDC_LCDCFG1),
+ REG(RW, ATMEL_LCDC_LCDCFG2),
+ REG(RW, ATMEL_LCDC_LCDCFG3),
+ REG(RW, ATMEL_LCDC_LCDCFG4),
+ REG(RW, ATMEL_LCDC_LCDCFG5),
+ REG(RW, ATMEL_LCDC_LCDCFG6),
+ REG(CS, ATMEL_LCDC_LCDEN),
+ REG(CS, ATMEL_LCDC_LCDIER),
+ REG(CS, ATMEL_LCDC_BASEIER),
+ REG(RW, ATMEL_LCDC_BASEHEAD),
+ REG(RW, ATMEL_LCDC_BASEADDR),
+ REG(RW, ATMEL_LCDC_BASECTRL),
+ REG(RW, ATMEL_LCDC_BASENEXT),
+ REG(RW, ATMEL_LCDC_BASECFG0),
+ REG(RW, ATMEL_LCDC_BASECFG1),
+ REG(RW, ATMEL_LCDC_BASECFG2),
+ REG(RW, ATMEL_LCDC_BASECFG3),
+ REG(RW, ATMEL_LCDC_BASECFG4),
+ REG(RW, ATMEL_LCDC_BASECFG5),
+ REG(RW, ATMEL_LCDC_BASECFG6),
+
+ REG(RW, ATMEL_LCDC_LCDISR),
+ REG(RW, ATMEL_LCDC_BASEISR),
+#undef REG
+};
+
+static int atmel_hlcdc_regs_show(struct seq_file *m, void *arg)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ unsigned i;
+
+ pm_runtime_get_sync(dev->dev);
+
+ seq_printf(m, "revision: %d\n", priv->rev);
+
+ for (i = 0; i < ARRAY_SIZE(registers); i++)
+ seq_printf(m, "%s:\t %08x\n", registers[i].name,
+ hlcdc_read(dev, registers[i].reg));
+
+ pm_runtime_put_sync(dev->dev);
+
+ return 0;
+}
+
+static int atmel_hlcdc_mm_show(struct seq_file *m, void *arg)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ return drm_mm_dump_table(m, &dev->vma_offset_manager->vm_addr_space_mm);
+}
+
+static struct drm_info_list atmel_hlcdc_debugfs_list[] = {
+ { "regs", atmel_hlcdc_regs_show, 0 },
+ { "mm", atmel_hlcdc_mm_show, 0 },
+ { "fb", drm_fb_cma_debugfs_show, 0 },
+};
+
+static int atmel_hlcdc_debugfs_init(struct drm_minor *minor)
+{
+ struct drm_device *dev = minor->dev;
+ struct atmel_hlcdc_module *mod;
+ int ret;
+
+ ret = drm_debugfs_create_files(atmel_hlcdc_debugfs_list,
+ ARRAY_SIZE(atmel_hlcdc_debugfs_list),
+ minor->debugfs_root, minor);
+
+ list_for_each_entry(mod, &module_list, list)
+ if (mod->funcs->debugfs_init)
+ mod->funcs->debugfs_init(mod, minor);
+
+ if (ret) {
+ dev_err(dev->dev, "could not install atmel_hlcdc_debugfs_list\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static void atmel_hlcdc_debugfs_cleanup(struct drm_minor *minor)
+{
+ struct atmel_hlcdc_module *mod;
+ drm_debugfs_remove_files(atmel_hlcdc_debugfs_list,
+ ARRAY_SIZE(atmel_hlcdc_debugfs_list), minor);
+
+ list_for_each_entry(mod, &module_list, list)
+ if (mod->funcs->debugfs_cleanup)
+ mod->funcs->debugfs_cleanup(mod, minor);
+}
+#endif
+
+
+static const struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .poll = drm_poll,
+ .read = drm_read,
+ .llseek = no_llseek,
+ .mmap = drm_gem_cma_mmap,
+};
+
+static struct drm_driver atmel_hlcdc_driver = {
+ .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET,
+ .load = atmel_hlcdc_load,
+ .unload = atmel_hlcdc_unload,
+ .preclose = atmel_hlcdc_preclose,
+ .lastclose = atmel_hlcdc_lastclose,
+ .irq_handler = atmel_hlcdc_irq,
+ .irq_preinstall = atmel_hlcdc_irq_preinstall,
+ .irq_postinstall = atmel_hlcdc_irq_postinstall,
+ .irq_uninstall = atmel_hlcdc_irq_uninstall,
+ .get_vblank_counter = drm_vblank_count,
+ .enable_vblank = atmel_hlcdc_enable_vblank,
+ .disable_vblank = atmel_hlcdc_disable_vblank,
+ .gem_free_object = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+ .dumb_create = drm_gem_cma_dumb_create,
+ .dumb_map_offset = drm_gem_cma_dumb_map_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
+#ifdef CONFIG_DEBUG_FS
+ .debugfs_init = atmel_hlcdc_debugfs_init,
+ .debugfs_cleanup = atmel_hlcdc_debugfs_cleanup,
+#endif
+ .fops = &fops,
+ .name = "atmel_hlcdc",
+ .desc = "ATMEL HLCD Controller DRM",
+ .date = "20141504",
+ .major = 1,
+ .minor = 0,
+};
+
+/*
+ * Power management:
+ */
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_hlcdc_pm_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int atmel_hlcdc_pm_resume(struct device *dev)
+{
+ return 0;
+}
+
+static const struct dev_pm_ops atmel_hlcdc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(atmel_hlcdc_pm_suspend, atmel_hlcdc_pm_resume)
+};
+#endif
+
+/*
+ * Platform driver:
+ */
+
+static int atmel_hlcdc_pdev_probe(struct platform_device *pdev)
+{
+ /* bail out early if no DT data: */
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+
+ /* defer probing if slave is in deferred probing */
+ if (slave_probing == true)
+ return -EPROBE_DEFER;
+
+ return drm_platform_init(&atmel_hlcdc_driver, pdev);
+}
+
+static int atmel_hlcdc_pdev_remove(struct platform_device *pdev)
+{
+ drm_put_dev(platform_get_drvdata(pdev));
+ return 0;
+}
+
+static struct of_device_id atmel_hlcdc_of_match[] = {
+ { .compatible = "atmel,hlcdc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, atmel_hlcdc_of_match);
+
+static struct platform_driver atmel_hlcdc_platform_driver = {
+ .probe = atmel_hlcdc_pdev_probe,
+ .remove = atmel_hlcdc_pdev_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "atmel_hlcdc",
+#ifdef CONFIG_PM_SLEEP
+ .pm = &atmel_hlcdc_pm_ops,
+#endif
+ .of_match_table = atmel_hlcdc_of_match,
+ },
+};
+
+static int __init atmel_hlcdc_drm_init(void)
+{
+ atmel_hlcdc_panel_init();
+ return platform_driver_register(&atmel_hlcdc_platform_driver);
+}
+
+static void __exit atmel_hlcdc_drm_fini(void)
+{
+ atmel_hlcdc_panel_fini();
+ platform_driver_unregister(&atmel_hlcdc_platform_driver);
+}
+
+late_initcall(atmel_hlcdc_drm_init);
+module_exit(atmel_hlcdc_drm_fini);
+
+MODULE_AUTHOR("Jean-Jacques Hiblot <jjhiblot@traphandler.com");
+MODULE_DESCRIPTION("ATMEL HLCDC DRM Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
new file mode 100644
index 0000000..e5d6a76
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_DRV_H__
+#define __ATMEL_HLCDC_DRV_H__
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/list.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+/* Defaulting to pixel clock defined on AM335x */
+#define ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK 126000
+
+
+struct atmel_hlcdc_drm_private {
+ void __iomem *mmio;
+
+ struct clk *bus_clk; /* bus clock*/
+ struct clk *clk; /* functional clock */
+ int rev; /* IP revision */
+
+ uint32_t guard_time;
+
+ uint32_t default_lcdcfg5;
+ /*
+ * Pixel Clock will be restricted to some value as
+ * defined in the device datasheet measured in KHz
+ */
+ uint32_t max_pixelclock;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+ unsigned int lcd_fck_rate;
+#endif
+
+ struct workqueue_struct *wq;
+
+ struct drm_fbdev_cma *fbdev;
+
+ struct drm_crtc *crtc;
+
+ struct backlight_device *backlight;
+
+ unsigned int num_encoders;
+ struct drm_encoder *encoders[8];
+
+ unsigned int num_connectors;
+ struct drm_connector *connectors[8];
+};
+
+/* Sub-module for display. Since we don't know at compile time what panels
+ * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
+ * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
+ * separate drivers. If they are probed and found to be present, they
+ * register themselves with atmel_hlcdc_register_module().
+ */
+struct atmel_hlcdc_module;
+
+struct atmel_hlcdc_module_ops {
+ /* create appropriate encoders/connectors: */
+ int (*modeset_init)(struct atmel_hlcdc_module *mod,
+ struct drm_device *dev);
+ void (*destroy)(struct atmel_hlcdc_module *mod);
+#ifdef CONFIG_DEBUG_FS
+ /* create debugfs nodes (can be NULL): */
+ int (*debugfs_init)(struct atmel_hlcdc_module *mod,
+ struct drm_minor *minor);
+ /* cleanup debugfs nodes (can be NULL): */
+ void (*debugfs_cleanup)(struct atmel_hlcdc_module *mod,
+ struct drm_minor *minor);
+#endif
+};
+
+struct atmel_hlcdc_module {
+ const char *name;
+ struct list_head list;
+ const struct atmel_hlcdc_module_ops *funcs;
+ unsigned int preferred_bpp;
+};
+
+void atmel_hlcdc_module_init(struct atmel_hlcdc_module *mod, const char *name,
+ const struct atmel_hlcdc_module_ops *funcs);
+void atmel_hlcdc_module_cleanup(struct atmel_hlcdc_module *mod);
+void atmel_hlcdc_slave_probedefer(bool defered);
+
+#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+
+struct drm_crtc *atmel_hlcdc_crtc_create(struct drm_device *dev);
+void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *crtc,
+ struct drm_file *file);
+irqreturn_t atmel_hlcdc_crtc_irq(struct drm_crtc *crtc);
+void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock);
+int atmel_hlcdc_crtc_mode_valid(struct drm_crtc *crtc,
+ struct drm_display_mode *mode);
+
+#endif /* __ATMEL_HLCDC_DRV_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
new file mode 100644
index 0000000..a54dfd5
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
@@ -0,0 +1,190 @@
+/*
+ * Header file for AT91 High end LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __ATMEL_HLCD_OVL_H__
+#define __ATMEL_HLCD_OVL_H__
+
+/*
+ * OVL has a seperate resource which already starts at offset 0x100.
+ * So, these defines start at 0x0. The manual will list them at 0x100.
+ */
+
+#define ATMEL_LCDC_OVRCHER 0x0000
+#define LCDC_OVRCHER_CHEN (0x1 << 0)
+#define LCDC_OVRCHER_UPDATEEN (0x1 << 1)
+#define LCDC_OVRCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_OVRCHDR 0x0004
+#define LCDC_OVRCHDR_CHDIS (0x1 << 0)
+#define LCDC_OVRCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_OVRCHSR 0x0008
+#define LCDC_OVRCHSR_CHSR (0x1 << 0)
+#define LCDC_OVRCHSR_UPDATESR (0x1 << 1)
+#define LCDC_OVRCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_OVRIER 0x000C
+#define LCDC_OVRIER_DMA (0x1 << 2)
+#define LCDC_OVRIER_DSCR (0x1 << 3)
+#define LCDC_OVRIER_ADD (0x1 << 4)
+#define LCDC_OVRIER_DONE (0x1 << 5)
+#define LCDC_OVRIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRIDR 0x0010
+#define LCDC_OVRIDR_DMA (0x1 << 2)
+#define LCDC_OVRIDR_DSCR (0x1 << 3)
+#define LCDC_OVRIDR_ADD (0x1 << 4)
+#define LCDC_OVRIDR_DONE (0x1 << 5)
+#define LCDC_OVRIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRIMR 0x0014
+#define LCDC_OVRIMR_DMA (0x1 << 2)
+#define LCDC_OVRIMR_DSCR (0x1 << 3)
+#define LCDC_OVRIMR_ADD (0x1 << 4)
+#define LCDC_OVRIMR_DONE (0x1 << 5)
+#define LCDC_OVRIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRISR 0x0018
+#define LCDC_OVRISR_DMA (0x1 << 2)
+#define LCDC_OVRISR_DSCR (0x1 << 3)
+#define LCDC_OVRISR_ADD (0x1 << 4)
+#define LCDC_OVRISR_DONE (0x1 << 5)
+#define LCDC_OVRISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRHEAD 0x001C
+
+#define ATMEL_LCDC_OVRADDR 0x0020
+
+#define ATMEL_LCDC_OVRCTRL 0x0024
+#define LCDC_OVRCTRL_DFETCH (0x1 << 0)
+#define LCDC_OVRCTRL_LFETCH (0x1 << 1)
+#define LCDC_OVRCTRL_DMAIEN (0x1 << 2)
+#define LCDC_OVRCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_OVRCTRL_ADDIEN (0x1 << 4)
+#define LCDC_OVRCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_OVRNEXT 0x0028
+
+#define ATMEL_LCDC_OVRCFG0 0x002C
+#define LCDC_OVRCFG0_SIF (0x1 << 0)
+#define LCDC_OVRCFG0_BLEN_OFFSET 4
+#define LCDC_OVRCFG0_BLEN (0x3 << LCDC_OVRCFG0_BLEN_OFFSET)
+#define LCDC_OVRCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_OVRCFG0_DLBO (0x1 << 8)
+#define LCDC_OVRCFG0_ROTDIS (0x1 << 12)
+#define LCDC_OVRCFG0_LOCKDIS (0x1 << 13)
+
+#define ATMEL_LCDC_OVRCFG1 0x0030
+#define LCDC_OVRCFG1_CLUTEN (0x1 << 0)
+#define LCDC_OVRCFG1_RGBMODE_OFFSET 4
+#define LCDC_OVRCFG1_RGBMODE (0xf << LCDC_OVRCFG1_RGBMODE_OFFSET)
+#define LCDC_OVRCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_OVRCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_OVRCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_OVRCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_OVRCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_OVRCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_OVRCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_OVRCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_OVRCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_OVRCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_OVRCFG1_CLUTMODE_OFFSET 8
+#define LCDC_OVRCFG1_CLUTMODE (0x3 << LCDC_OVRCFG1_CLUTMODE_OFFSET)
+#define LCDC_OVRCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_OVRCFG2 0x0034
+#define LCDC_OVRCFG2_XOFFSET_OFFSET 0
+#define LCDC_OVRCFG2_XOFFSET (0x7ff << LCDC_OVRCFG2_XOFFSET_OFFSET)
+#define LCDC_OVRCFG2_YOFFSET_OFFSET 16
+#define LCDC_OVRCFG2_YOFFSET (0x7ff << LCDC_OVRCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG3 0x0038
+#define LCDC_OVRCFG3_XSIZE_OFFSET 0
+#define LCDC_OVRCFG3_XSIZE (0x7ff << LCDC_OVRCFG3_XSIZE_OFFSET)
+#define LCDC_OVRCFG3_YSIZE_OFFSET 16
+#define LCDC_OVRCFG3_YSIZE (0x7ff << LCDC_OVRCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG4 0x003C
+
+#define ATMEL_LCDC_OVRCFG5 0x0040
+
+#define ATMEL_LCDC_OVRCFG6 0x0044
+#define LCDC_OVRCFG6_BDEF_OFFSET 0
+#define LCDC_OVRCFG6_BDEF (0xff << LCDC_OVRCFG6_BDEF_OFFSET)
+#define LCDC_OVRCFG6_GDEF_OFFSET 8
+#define LCDC_OVRCFG6_GDEF (0xff << LCDC_OVRCFG6_GDEF_OFFSET)
+#define LCDC_OVRCFG6_RDEF_OFFSET 16
+#define LCDC_OVRCFG6_RDEF (0xff << LCDC_OVRCFG6_RDEF_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG7 0x0048
+#define LCDC_OVRCFG7_BKEY_OFFSET 0
+#define LCDC_OVRCFG7_BKEY (0xff << LCDC_OVRCFG7_BKEY_OFFSET)
+#define LCDC_OVRCFG7_GKEY_OFFSET 8
+#define LCDC_OVRCFG7_GKEY (0xff << LCDC_OVRCFG7_GKEY_OFFST)
+#define LCDC_OVRCFG7_RKEY_OFFSET 16
+#define LCDC_OVRCFG7_RKEY (0xff << LCDC_OVRCFG7_RKEY_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG8 0x004C
+#define LCDC_OVRCFG8_BMASK_OFFSET 0
+#define LCDC_OVRCFG8_BMASK (0xff << LCDC_OVRCFG8_BMASK_OFFSET)
+#define LCDC_OVRCFG8_GMASK_OFFSET 8
+#define LCDC_OVRCFG8_GMASK (0xff << LCDC_OVRCFG8_GMASK_OFFSET)
+#define LCDC_OVRCFG8_RMASK_OFFSET 16
+#define LCDC_OVRCFG8_RMASK (0xff << LCDC_OVRCFG8_RMASK_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG9 0x0050
+#define LCDC_OVRCFG9_CRKEY (0x1 << 0)
+#define LCDC_OVRCFG9_INV (0x1 << 1)
+#define LCDC_OVRCFG9_ITER2BL (0x1 << 2)
+#define LCDC_OVRCFG9_ITER (0x1 << 3)
+#define LCDC_OVRCFG9_REVALPHA (0x1 << 4)
+#define LCDC_OVRCFG9_GAEN (0x1 << 5)
+#define LCDC_OVRCFG9_LAEN (0x1 << 6)
+#define LCDC_OVRCFG9_OVR (0x1 << 7)
+#define LCDC_OVRCFG9_DMA (0x1 << 8)
+#define LCDC_OVRCFG9_REP (0x1 << 9)
+#define LCDC_OVRCFG9_DSTKEY (0x1 << 10)
+#define LCDC_OVRCFG9_GA_OFFSET 16
+#define LCDC_OVRCFG9_GA (0xff << LCDC_OVRCFG9_GA_OFFSET)
+
+
+static inline void hlcdc_ovl_write(struct drm_device *dev, int overlay,
+ u32 reg, u32 data)
+{
+ hlcdc_write(dev, (0x100 * overlay) + 0x140 + reg, data);
+}
+
+static inline u32 hlcdc_ovl_read(struct drm_device *dev, int overlay, u32 reg)
+{
+ return hlcdc_read(dev, (0x100 * overlay) + 0x140 + reg);
+}
+
+#endif /* __ATMEL_HLCD_OVL_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
new file mode 100644
index 0000000..b004247
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc panel driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/backlight.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include "atmel_hlcdc_drv.h"
+
+struct panel_module {
+ struct atmel_hlcdc_module base;
+ struct atmel_hlcdc_panel_info *info;
+ struct display_timings *timings;
+ struct backlight_device *backlight;
+ u32 preferred_bpp;
+ u32 enable_gpio_flags;
+ int enable_gpio;
+ int hsync_neg_pol;
+ int vsync_neg_pol;
+};
+#define to_panel_module(x) container_of(x, struct panel_module, base)
+
+
+/*
+ * Encoder:
+ */
+
+struct panel_encoder {
+ struct drm_encoder base;
+ struct panel_module *mod;
+};
+#define to_panel_encoder(x) container_of(x, struct panel_encoder, base)
+
+
+static void panel_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ drm_encoder_cleanup(encoder);
+ kfree(panel_encoder);
+}
+
+static void panel_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ struct backlight_device *backlight = panel_encoder->mod->backlight;
+
+ if (!backlight)
+ return;
+
+ backlight->props.power = mode == DRM_MODE_DPMS_ON
+ ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
+ backlight_update_status(backlight);
+
+ if (gpio_is_valid(panel_encoder->mod->enable_gpio)) {
+ int value = (mode == DRM_MODE_DPMS_ON) ? 1 : 0;
+
+ if (panel_encoder->mod->enable_gpio_flags & GPIO_ACTIVE_LOW)
+ value ^= 1;
+
+ gpio_set_value(panel_encoder->mod->enable_gpio, value);
+ }
+}
+
+static bool panel_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+
+ if (panel_encoder->mod->hsync_neg_pol)
+ adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (panel_encoder->mod->vsync_neg_pol)
+ adjusted_mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
+ return true;
+}
+
+static void panel_encoder_prepare(struct drm_encoder *encoder)
+{
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void panel_encoder_commit(struct drm_encoder *encoder)
+{
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static void panel_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* nothing needed */
+}
+
+static const struct drm_encoder_funcs panel_encoder_funcs = {
+ .destroy = panel_encoder_destroy,
+};
+
+static const struct drm_encoder_helper_funcs panel_encoder_helper_funcs = {
+ .dpms = panel_encoder_dpms,
+ .mode_fixup = panel_encoder_mode_fixup,
+ .prepare = panel_encoder_prepare,
+ .commit = panel_encoder_commit,
+ .mode_set = panel_encoder_mode_set,
+};
+
+static struct drm_encoder *panel_encoder_create(struct drm_device *dev,
+ struct panel_module *mod)
+{
+ struct panel_encoder *panel_encoder;
+ struct drm_encoder *encoder;
+ int ret;
+
+ panel_encoder = kzalloc(sizeof(*panel_encoder), GFP_KERNEL);
+ if (!panel_encoder) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_encoder->mod = mod;
+
+ encoder = &panel_encoder->base;
+ encoder->possible_crtcs = 1;
+
+ ret = drm_encoder_init(dev, encoder, &panel_encoder_funcs,
+ DRM_MODE_ENCODER_LVDS);
+ if (ret < 0)
+ goto fail;
+
+ drm_encoder_helper_add(encoder, &panel_encoder_helper_funcs);
+
+ return encoder;
+
+fail:
+ panel_encoder_destroy(encoder);
+ return NULL;
+}
+
+/*
+ * Connector:
+ */
+
+struct panel_connector {
+ struct drm_connector base;
+
+ struct drm_encoder *encoder; /* our connected encoder */
+ struct panel_module *mod;
+};
+#define to_panel_connector(x) container_of(x, struct panel_connector, base)
+
+
+static void panel_connector_destroy(struct drm_connector *connector)
+{
+ struct panel_connector *panel_con = to_panel_connector(connector);
+ drm_connector_cleanup(connector);
+ kfree(panel_con);
+}
+
+static enum drm_connector_status panel_connector_detect(
+ struct drm_connector *connector,
+ bool force)
+{
+ return connector_status_connected;
+}
+
+static int panel_connector_get_modes(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct panel_connector *panel_con = to_panel_connector(connector);
+ struct display_timings *timings = panel_con->mod->timings;
+ int i;
+
+ for (i = 0; i < timings->num_timings; i++) {
+ struct drm_display_mode *mode = drm_mode_create(dev);
+ struct videomode vm;
+
+ if (videomode_from_timings(timings, &vm, i))
+ break;
+
+ drm_display_mode_from_videomode(&vm, mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+
+ if (timings->native_mode == i)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ }
+
+ return i;
+}
+
+static int panel_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct atmel_hlcdc_drm_private *priv = connector->dev->dev_private;
+ /* our only constraints are what the crtc can generate: */
+ return atmel_hlcdc_crtc_mode_valid(priv->crtc, mode);
+}
+
+static struct drm_encoder *panel_connector_best_encoder(
+ struct drm_connector *connector)
+{
+ struct panel_connector *panel_connector = to_panel_connector(connector);
+ return panel_connector->encoder;
+}
+
+static const struct drm_connector_funcs panel_connector_funcs = {
+ .destroy = panel_connector_destroy,
+ .dpms = drm_helper_connector_dpms,
+ .detect = panel_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs panel_connector_helper_funcs = {
+ .get_modes = panel_connector_get_modes,
+ .mode_valid = panel_connector_mode_valid,
+ .best_encoder = panel_connector_best_encoder,
+};
+
+static struct drm_connector *panel_connector_create(struct drm_device *dev,
+ struct panel_module *mod, struct drm_encoder *encoder)
+{
+ struct panel_connector *panel_connector;
+ struct drm_connector *connector;
+ int ret;
+
+ panel_connector = kzalloc(sizeof(*panel_connector), GFP_KERNEL);
+ if (!panel_connector) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_connector->encoder = encoder;
+ panel_connector->mod = mod;
+
+ connector = &panel_connector->base;
+
+ drm_connector_init(dev, connector, &panel_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+ drm_connector_helper_add(connector, &panel_connector_helper_funcs);
+
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ ret = drm_mode_connector_attach_encoder(connector, encoder);
+ if (ret)
+ goto fail;
+
+ drm_sysfs_connector_add(connector);
+
+ return connector;
+
+fail:
+ panel_connector_destroy(connector);
+ return NULL;
+}
+
+/*
+ * Module:
+ */
+
+static int panel_modeset_init(struct atmel_hlcdc_module *mod,
+ struct drm_device *dev)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+
+ encoder = panel_encoder_create(dev, panel_mod);
+ if (!encoder)
+ return -ENOMEM;
+
+ connector = panel_connector_create(dev, panel_mod, encoder);
+ if (!connector)
+ return -ENOMEM;
+
+ priv->encoders[priv->num_encoders++] = encoder;
+ priv->connectors[priv->num_connectors++] = connector;
+
+ return 0;
+}
+
+static void panel_destroy(struct atmel_hlcdc_module *mod)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+
+ if (panel_mod->timings) {
+ display_timings_release(panel_mod->timings);
+ kfree(panel_mod->timings);
+ }
+
+ atmel_hlcdc_module_cleanup(mod);
+ kfree(panel_mod->info);
+ kfree(panel_mod);
+}
+
+static const struct atmel_hlcdc_module_ops panel_module_ops = {
+ .modeset_init = panel_modeset_init,
+ .destroy = panel_destroy,
+};
+
+/*
+ * Device:
+ */
+
+/* maybe move this somewhere common if it is needed by other outputs? */
+static int of_get_panel_info(struct device *dev, struct device_node *np,
+ struct panel_module *panel)
+{
+ enum of_gpio_flags flags;
+
+ int err = 0;
+
+ if (!np) {
+ pr_err("%s: no devicenode given\n", __func__);
+ return -EINVAL;
+ }
+ if (of_property_read_u32(np, "preferred-bpp",
+ &panel->preferred_bpp) < 0)
+ panel->preferred_bpp = 16;
+ panel->hsync_neg_pol = of_property_read_bool(np, "invert-hsync");
+ panel->vsync_neg_pol = of_property_read_bool(np, "invert-vsync");
+ panel->enable_gpio = of_get_named_gpio_flags(np, "enable-gpio",
+ 0, &flags);
+ if (gpio_is_valid(panel->enable_gpio)) {
+ unsigned int value;
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ panel->enable_gpio_flags |= GPIO_ACTIVE_LOW;
+
+ err = gpio_request(panel->enable_gpio, "bkl_enable");
+ if (err < 0) {
+ dev_err(dev, "failed to request GPIO#%u: %d\n",
+ panel->enable_gpio, err);
+ return err;
+ }
+
+ value = (panel->enable_gpio_flags & GPIO_ACTIVE_LOW) != 0;
+
+ err = gpio_direction_output(panel->enable_gpio, value);
+ if (err < 0) {
+ dev_err(dev, "failed to setup GPIO%u: %d\n",
+ panel->enable_gpio, err);
+ goto free_gpio;
+ }
+ }
+
+ return 0;
+
+free_gpio:
+ gpio_free(panel->enable_gpio);
+ return err;
+}
+
+static struct of_device_id panel_of_match[];
+
+static int panel_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct panel_module *panel_mod;
+ struct atmel_hlcdc_module *mod;
+ struct pinctrl *pinctrl;
+ int ret = -EINVAL;
+
+ /* bail out early if no DT data: */
+ if (!node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+ panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
+ if (!panel_mod)
+ return -ENOMEM;
+
+ mod = &panel_mod->base;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "pins are not configured\n");
+
+ panel_mod->timings = of_get_display_timings(node);
+ if (!panel_mod->timings) {
+ dev_err(&pdev->dev, "could not get panel timings\n");
+ goto fail;
+ }
+
+ if (of_get_panel_info(&pdev->dev, node, panel_mod) < 0) {
+ dev_err(&pdev->dev, "could not get panel info\n");
+ goto fail;
+ }
+
+ mod->preferred_bpp = panel_mod->preferred_bpp;
+
+ panel_mod->backlight = of_find_backlight_by_node(node);
+ if (panel_mod->backlight)
+ dev_info(&pdev->dev, "found backlight\n");
+
+
+ atmel_hlcdc_module_init(mod, "panel", &panel_module_ops);
+
+ return 0;
+
+fail:
+ panel_destroy(mod);
+ return ret;
+}
+
+static int panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct of_device_id panel_of_match[] = {
+ { .compatible = "atmel,hlcdc,panel", },
+ { },
+};
+
+struct platform_driver panel_driver = {
+ .probe = panel_probe,
+ .remove = panel_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "panel",
+ .of_match_table = panel_of_match,
+ },
+};
+
+int __init atmel_hlcdc_panel_init(void)
+{
+ return platform_driver_register(&panel_driver);
+}
+
+void __exit atmel_hlcdc_panel_fini(void)
+{
+ platform_driver_unregister(&panel_driver);
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
new file mode 100644
index 0000000..0f66169
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc panel driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_PANEL_H__
+#define __ATMEL_HLCDC_PANEL_H__
+
+/* sub-module for generic lcd panel output */
+
+int atmel_hlcdc_panel_init(void);
+void atmel_hlcdc_panel_fini(void);
+
+#endif /* __ATMEL_HLCDC_PANEL_H__ */
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel
Cc: airlied, Jean-Jacques Hiblot, robdclark, plagnioj, linux-kernel
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
.../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
13 files changed, 3005 insertions(+)
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 8e7fa4d..13fec638 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -190,6 +190,8 @@ source "drivers/gpu/drm/omapdrm/Kconfig"
source "drivers/gpu/drm/tilcdc/Kconfig"
+source "drivers/gpu/drm/atmel_hlcdc/Kconfig"
+
source "drivers/gpu/drm/qxl/Kconfig"
source "drivers/gpu/drm/bochs/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 292a79d..8245aa5 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -57,6 +57,7 @@ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
obj-$(CONFIG_DRM_OMAP) += omapdrm/
obj-$(CONFIG_DRM_TILCDC) += tilcdc/
+obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc/
obj-$(CONFIG_DRM_QXL) += qxl/
obj-$(CONFIG_DRM_BOCHS) += bochs/
obj-$(CONFIG_DRM_MSM) += msm/
diff --git a/drivers/gpu/drm/atmel_hlcdc/Kconfig b/drivers/gpu/drm/atmel_hlcdc/Kconfig
new file mode 100644
index 0000000..6ee5989
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/Kconfig
@@ -0,0 +1,13 @@
+config DRM_ATMEL_HLCDC
+ tristate "DRM Support for ATMEL HLCDC Display Controller"
+ depends on DRM && OF && ARM
+ select DRM_KMS_HELPER
+ select DRM_KMS_FB_HELPER
+ select DRM_KMS_CMA_HELPER
+ select DRM_GEM_CMA_HELPER
+ select VIDEOMODE_HELPERS
+ select BACKLIGHT_CLASS_DEVICE
+ select BACKLIGHT_LCD_SUPPORT
+ help
+ Choose this option if you have an ATMEL SoC with HLCDC display
+ controller, for example SAMA5D36EK.
diff --git a/drivers/gpu/drm/atmel_hlcdc/Makefile b/drivers/gpu/drm/atmel_hlcdc/Makefile
new file mode 100644
index 0000000..4935c36
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/Makefile
@@ -0,0 +1,12 @@
+ccflags-y := -Iinclude/drm
+ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
+ ccflags-y += -Werror
+endif
+
+atmel_hlcdc-y := \
+ atmel_hlcdc_crtc.o \
+ atmel_hlcdc_panel.o \
+ atmel_hlcdc_backlight.o \
+ atmel_hlcdc_drv.o
+
+obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc.o
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
new file mode 100644
index 0000000..8ed0767
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
@@ -0,0 +1,771 @@
+/*
+ * Header file for AT91 High end LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef __ATMEL_HLCD_H__
+#define __ATMEL_HLCD_H__
+
+/* Lcdc hardware registers */
+#define ATMEL_LCDC_LCDCFG0 0x0000
+#define LCDC_LCDCFG0_CLKPOL (0x1 << 0)
+#define LCDC_LCDCFG0_CLKSEL (0x1 << 2)
+#define LCDC_LCDCFG0_CLKPWMSEL (0x1 << 3)
+#define LCDC_LCDCFG0_CGDISBASE (0x1 << 8)
+#define LCDC_LCDCFG0_CGDISOVR1 (0x1 << 9)
+#define LCDC_LCDCFG0_CGDISOVR2 (0x1 << 10)
+#define LCDC_LCDCFG0_CGDISHEO (0x1 << 11)
+#define LCDC_LCDCFG0_CGDISHCR (0x1 << 12)
+#define LCDC_LCDCFG0_CGDISPP (0x1 << 13)
+#define LCDC_LCDCFG0_CLKDIV_OFFSET 16
+#define LCDC_LCDCFG0_CLKDIV (0xff << LCDC_LCDCFG0_CLKDIV_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG1 0x0004
+#define LCDC_LCDCFG1_HSPW_OFFSET 0
+#define LCDC_LCDCFG1_HSPW (0x3f << LCDC_LCDCFG1_HSPW_OFFSET)
+#define LCDC_LCDCFG1_VSPW_OFFSET 16
+#define LCDC_LCDCFG1_VSPW (0x3f << LCDC_LCDCFG1_VSPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG2 0x0008
+#define LCDC_LCDCFG2_VFPW_OFFSET 0
+#define LCDC_LCDCFG2_VFPW (0x3f << LCDC_LCDCFG2_VFPW_OFFSET)
+#define LCDC_LCDCFG2_VBPW_OFFSET 16
+#define LCDC_LCDCFG2_VBPW (0x3f << LCDC_LCDCFG2_VBPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG3 0x000C
+#define LCDC_LCDCFG3_HFPW_OFFSET 0
+#define LCDC_LCDCFG3_HFPW (0xff << LCDC_LCDCFG3_HFPW_OFFSET)
+#define LCDC2_LCDCFG3_HFPW (0x1ff << LCDC_LCDCFG3_HFPW_OFFSET)
+#define LCDC_LCDCFG3_HBPW_OFFSET 16
+#define LCDC_LCDCFG3_HBPW (0xff << LCDC_LCDCFG3_HBPW_OFFSET)
+#define LCDC2_LCDCFG3_HBPW (0x1ff << LCDC_LCDCFG3_HBPW_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG4 0x0010
+#define LCDC_LCDCFG4_PPL_OFFSET 0
+#define LCDC_LCDCFG4_PPL (0x7ff << LCDC_LCDCFG4_PPL_OFFSET)
+#define LCDC_LCDCFG4_RPF_OFFSET 16
+#define LCDC_LCDCFG4_RPF (0x7ff << LCDC_LCDCFG4_RPF_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG5 0x0014
+#define LCDC_LCDCFG5_HSPOL (0x1 << 0)
+#define LCDC_LCDCFG5_VSPOL (0x1 << 1)
+#define LCDC_LCDCFG5_VSPDLYS (0x1 << 2)
+#define LCDC_LCDCFG5_VSPDLYE (0x1 << 3)
+#define LCDC_LCDCFG5_DISPPOL (0x1 << 4)
+#define LCDC_LCDCFG5_SERIAL (0x1 << 5)
+#define LCDC_LCDCFG5_DITHER (0x1 << 6)
+#define LCDC_LCDCFG5_DISPDLY (0x1 << 7)
+#define LCDC_LCDCFG5_MODE_OFFSET 8
+#define LCDC_LCDCFG5_MODE (0x3 << LCDC_LCDCFG5_MODE_OFFSET)
+#define LCDC_LCDCFG5_MODE_OUTPUT_12BPP (0x0 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_16BPP (0x1 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_18BPP (0x2 << 8)
+#define LCDC_LCDCFG5_MODE_OUTPUT_24BPP (0x3 << 8)
+#define LCDC_LCDCFG5_PP (0x1 << 10)
+#define LCDC_LCDCFG5_VSPSU (0x1 << 12)
+#define LCDC_LCDCFG5_VSPHO (0x1 << 13)
+#define LCDC_LCDCFG5_GUARDTIME_OFFSET 16
+#define LCDC_LCDCFG5_GUARDTIME (0x1f << LCDC_LCDCFG5_GUARDTIME_OFFSET)
+
+#define ATMEL_LCDC_LCDCFG6 0x0018
+#define LCDC_LCDCFG6_PWMPS_OFFSET 0
+#define LCDC_LCDCFG6_PWMPS (0x7 << LCDC_LCDCFG6_PWMPS_OFFSET)
+#define LCDC_LCDCFG6_PWMPOL (0x1 << 4)
+#define LCDC_LCDCFG6_PWMCVAL_OFFSET 8
+#define LCDC_LCDCFG6_PWMCVAL (0xff << LCDC_LCDCFG6_PWMCVAL_OFFSET)
+
+#define ATMEL_LCDC_LCDEN 0x0020
+#define LCDC_LCDEN_CLKEN (0x1 << 0)
+#define LCDC_LCDEN_SYNCEN (0x1 << 1)
+#define LCDC_LCDEN_DISPEN (0x1 << 2)
+#define LCDC_LCDEN_PWMEN (0x1 << 3)
+
+#define ATMEL_LCDC_LCDDIS 0x0024
+#define LCDC_LCDDIS_CLKDIS (0x1 << 0)
+#define LCDC_LCDDIS_SYNCDIS (0x1 << 1)
+#define LCDC_LCDDIS_DISPDIS (0x1 << 2)
+#define LCDC_LCDDIS_PWMDIS (0x1 << 3)
+#define LCDC_LCDDIS_CLKRST (0x1 << 8)
+#define LCDC_LCDDIS_SYNCRST (0x1 << 9)
+#define LCDC_LCDDIS_DISPRST (0x1 << 10)
+#define LCDC_LCDDIS_PWMRST (0x1 << 11)
+
+#define ATMEL_LCDC_LCDSR 0x0028
+#define LCDC_LCDSR_CLKSTS (0x1 << 0)
+#define LCDC_LCDSR_LCDSTS (0x1 << 1)
+#define LCDC_LCDSR_DISPSTS (0x1 << 2)
+#define LCDC_LCDSR_PWMSTS (0x1 << 3)
+#define LCDC_LCDSR_SIPSTS (0x1 << 4)
+
+#define ATMEL_LCDC_LCDIER 0x002C
+#define LCDC_LCDIER_SOFIE (0x1 << 0)
+#define LCDC_LCDIER_DISIE (0x1 << 1)
+#define LCDC_LCDIER_DISPIE (0x1 << 2)
+#define LCDC_LCDIER_FIFOERRIE (0x1 << 4)
+#define LCDC_LCDIER_BASEIE (0x1 << 8)
+#define LCDC_LCDIER_OVR1IE (0x1 << 9)
+#define LCDC_LCDIER_OVR2IE (0x1 << 10)
+#define LCDC_LCDIER_HEOIE (0x1 << 11)
+#define LCDC_LCDIER_HCRIE (0x1 << 12)
+#define LCDC_LCDIER_PPIE (0x1 << 13)
+
+#define ATMEL_LCDC_LCDIDR 0x0030
+#define LCDC_LCDIDR_SOFID (0x1 << 0)
+#define LCDC_LCDIDR_DISID (0x1 << 1)
+#define LCDC_LCDIDR_DISPID (0x1 << 2)
+#define LCDC_LCDIDR_FIFOERRID (0x1 << 4)
+#define LCDC_LCDIDR_BASEID (0x1 << 8)
+#define LCDC_LCDIDR_OVR1ID (0x1 << 9)
+#define LCDC_LCDIDR_OVR2ID (0x1 << 10)
+#define LCDC_LCDIDR_HEOID (0x1 << 11)
+#define LCDC_LCDIDR_HCRID (0x1 << 12)
+#define LCDC_LCDIDR_PPID (0x1 << 13)
+
+#define ATMEL_LCDC_LCDIMR 0x0034
+#define LCDC_LCDIMR_SOFIM (0x1 << 0)
+#define LCDC_LCDIMR_DISIM (0x1 << 1)
+#define LCDC_LCDIMR_DISPIM (0x1 << 2)
+#define LCDC_LCDIMR_FIFOERRIM (0x1 << 4)
+#define LCDC_LCDIMR_BASEIM (0x1 << 8)
+#define LCDC_LCDIMR_OVR1IM (0x1 << 9)
+#define LCDC_LCDIMR_OVR2IM (0x1 << 10)
+#define LCDC_LCDIMR_HEOIM (0x1 << 11)
+#define LCDC_LCDIMR_HCRIM (0x1 << 12)
+#define LCDC_LCDIMR_PPIM (0x1 << 13)
+
+#define ATMEL_LCDC_LCDISR 0x0038
+#define LCDC_LCDISR_SOF (0x1 << 0)
+#define LCDC_LCDISR_DIS (0x1 << 1)
+#define LCDC_LCDISR_DISP (0x1 << 2)
+#define LCDC_LCDISR_FIFOERR (0x1 << 4)
+#define LCDC_LCDISR_BASE (0x1 << 8)
+#define LCDC_LCDISR_OVR1 (0x1 << 9)
+#define LCDC_LCDISR_OVR2 (0x1 << 10)
+#define LCDC_LCDISR_HEO (0x1 << 11)
+#define LCDC_LCDISR_HCR (0x1 << 12)
+#define LCDC_LCDISR_PP (0x1 << 13)
+
+#define ATMEL_LCDC_BASECHER 0x0040
+#define LCDC_BASECHER_CHEN (0x1 << 0)
+#define LCDC_BASECHER_UPDATEEN (0x1 << 1)
+#define LCDC_BASECHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_BASECHDR 0x0044
+#define LCDC_BASECHDR_CHDIS (0x1 << 0)
+#define LCDC_BASECHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_BASECHSR 0x0048
+#define LCDC_BASECHSR_CHSR (0x1 << 0)
+#define LCDC_BASECHSR_UPDATESR (0x1 << 1)
+#define LCDC_BASECHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_BASEIER 0x004C
+#define LCDC_BASEIER_DMA (0x1 << 2)
+#define LCDC_BASEIER_DSCR (0x1 << 3)
+#define LCDC_BASEIER_ADD (0x1 << 4)
+#define LCDC_BASEIER_DONE (0x1 << 5)
+#define LCDC_BASEIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEIDR 0x0050
+#define LCDC_BASEIDR_DMA (0x1 << 2)
+#define LCDC_BASEIDR_DSCR (0x1 << 3)
+#define LCDC_BASEIDR_ADD (0x1 << 4)
+#define LCDC_BASEIDR_DONE (0x1 << 5)
+#define LCDC_BASEIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEIMR 0x0054
+#define LCDC_BASEIMR_DMA (0x1 << 2)
+#define LCDC_BASEIMR_DSCR (0x1 << 3)
+#define LCDC_BASEIMR_ADD (0x1 << 4)
+#define LCDC_BASEIMR_DONE (0x1 << 5)
+#define LCDC_BASEIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEISR 0x0058
+#define LCDC_BASEISR_DMA (0x1 << 2)
+#define LCDC_BASEISR_DSCR (0x1 << 3)
+#define LCDC_BASEISR_ADD (0x1 << 4)
+#define LCDC_BASEISR_DONE (0x1 << 5)
+#define LCDC_BASEISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_BASEHEAD 0x005C
+
+#define ATMEL_LCDC_BASEADDR 0x0060
+
+#define ATMEL_LCDC_BASECTRL 0x0064
+#define LCDC_BASECTRL_DFETCH (0x1 << 0)
+#define LCDC_BASECTRL_LFETCH (0x1 << 1)
+#define LCDC_BASECTRL_DMAIEN (0x1 << 2)
+#define LCDC_BASECTRL_DSCRIEN (0x1 << 3)
+#define LCDC_BASECTRL_ADDIEN (0x1 << 4)
+#define LCDC_BASECTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_BASENEXT 0x0068
+
+#define ATMEL_LCDC_BASECFG0 0x006C
+#define LCDC_BASECFG0_SIF (0x1 << 0)
+#define LCDC_BASECFG0_BLEN_OFFSET 4
+#define LCDC_BASECFG0_BLEN (0x3 << LCDC_BASECFG0_BLEN_OFFSET)
+#define LCDC_BASECFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_BASECFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_BASECFG0_DLBO (0x1 << 8)
+
+#define ATMEL_LCDC_BASECFG1 0x0070
+#define LCDC_BASECFG1_CLUTEN (0x1 << 0)
+#define LCDC_BASECFG1_RGBMODE_OFFSET 4
+#define LCDC_BASECFG1_RGBMODE (0xf << LCDC_BASECFG1_RGBMODE_OFFSET)
+#define LCDC_BASECFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_BASECFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_BASECFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_BASECFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_BASECFG1_CLUTMODE_OFFSET 8
+#define LCDC_BASECFG1_CLUTMODE (0x3 << LCDC_BASECFG1_CLUTMODE_OFFSET)
+#define LCDC_BASECFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_BASECFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_BASECFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_BASECFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_BASECFG2 0x0074
+
+#define ATMEL_LCDC_BASECFG3 0x0078
+#define LCDC_BASECFG3_BDEF_OFFSET 0
+#define LCDC_BASECFG3_BDEF (0xff << LCDC_BASECFG3_BDEF_OFFSET)
+#define LCDC_BASECFG3_GDEF_OFFSET 8
+#define LCDC_BASECFG3_GDEF (0xff << LCDC_BASECFG3_GDEF_OFFSET)
+#define LCDC_BASECFG3_RDEF_OFFSET 16
+#define LCDC_BASECFG3_RDEF (0xff << LCDC_BASECFG3_RDEF_OFFSET)
+
+#define ATMEL_LCDC_BASECFG4 0x007C
+#define LCDC_BASECFG4_DMA (0x1 << 8)
+#define LCDC_BASECFG4_REP (0x1 << 9)
+#define LCDC_BASECFG4_DISCEN (0x1 << 11)
+
+#define ATMEL_LCDC_BASECFG5 0x0080
+#define LCDC_BASECFG5_DISCXPOS_OFFSET 0
+#define LCDC_BASECFG5_DISCXPOS (0x7ff << LCDC_BASECFG5_DISCXPOS_OFFSET)
+#define LCDC_BASECFG5_DISCYPOS_OFFSET 16
+#define LCDC_BASECFG5_DISCYPOS (0x7ff << LCDC_BASECFG5_DISCYPOS_OFFSET)
+
+#define ATMEL_LCDC_BASECFG6 0x0084
+#define LCDC_BASECFG6_DISCXSIZE_OFFSET 0
+#define LCDC_BASECFG6_DISCXSIZE (0x7ff << LCDC_BASECFG6_DISCXSIZE_OFFSET)
+#define LCDC_BASECFG6_DISCYSIZE_OFFSET 16
+#define LCDC_BASECFG6_DISCYSIZE (0x7ff << LCDC_BASECFG6_DISCYSIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCHER 0x0280
+#define ATMEL_LCDC2_HEOCHER 0x0340
+#define LCDC_HEOCHER_CHEN (0x1 << 0)
+#define LCDC_HEOCHER_UPDATEEN (0x1 << 1)
+#define LCDC_HEOCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_HEOCHDR 0x0284
+#define LCDC_HEOCHDR_CHDIS (0x1 << 0)
+#define LCDC_HEOCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_HEOCHSR 0x0288
+#define LCDC_HEOCHSR_CHSR (0x1 << 0)
+#define LCDC_HEOCHSR_UPDATESR (0x1 << 1)
+#define LCDC_HEOCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_HEOIER 0x028C
+#define LCDC_HEOIER_DMA (0x1 << 2)
+#define LCDC_HEOIER_DSCR (0x1 << 3)
+#define LCDC_HEOIER_ADD (0x1 << 4)
+#define LCDC_HEOIER_DONE (0x1 << 5)
+#define LCDC_HEOIER_OVR (0x1 << 6)
+#define LCDC_HEOIER_UDMA (0x1 << 10)
+#define LCDC_HEOIER_UDSCR (0x1 << 11)
+#define LCDC_HEOIER_UADD (0x1 << 12)
+#define LCDC_HEOIER_UDONE (0x1 << 13)
+#define LCDC_HEOIER_UOVR (0x1 << 14)
+#define LCDC_HEOIER_VDMA (0x1 << 18)
+#define LCDC_HEOIER_VDSCR (0x1 << 19)
+#define LCDC_HEOIER_VADD (0x1 << 20)
+#define LCDC_HEOIER_VDONE (0x1 << 21)
+#define LCDC_HEOIER_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOIDR 0x0290
+#define LCDC_HEOIDR_DMA (0x1 << 2)
+#define LCDC_HEOIDR_DSCR (0x1 << 3)
+#define LCDC_HEOIDR_ADD (0x1 << 4)
+#define LCDC_HEOIDR_DONE (0x1 << 5)
+#define LCDC_HEOIDR_OVR (0x1 << 6)
+#define LCDC_HEOIDR_UDMA (0x1 << 10)
+#define LCDC_HEOIDR_UDSCR (0x1 << 11)
+#define LCDC_HEOIDR_UADD (0x1 << 12)
+#define LCDC_HEOIDR_UDONE (0x1 << 13)
+#define LCDC_HEOIDR_UOVR (0x1 << 14)
+#define LCDC_HEOIDR_VDMA (0x1 << 18)
+#define LCDC_HEOIDR_VDSCR (0x1 << 19)
+#define LCDC_HEOIDR_VADD (0x1 << 20)
+#define LCDC_HEOIDR_VDONE (0x1 << 21)
+#define LCDC_HEOIDR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOIMR 0x0294
+#define LCDC_HEOIMR_DMA (0x1 << 2)
+#define LCDC_HEOIMR_DSCR (0x1 << 3)
+#define LCDC_HEOIMR_ADD (0x1 << 4)
+#define LCDC_HEOIMR_DONE (0x1 << 5)
+#define LCDC_HEOIMR_OVR (0x1 << 6)
+#define LCDC_HEOIMR_UDMA (0x1 << 10)
+#define LCDC_HEOIMR_UDSCR (0x1 << 11)
+#define LCDC_HEOIMR_UADD (0x1 << 12)
+#define LCDC_HEOIMR_UDONE (0x1 << 13)
+#define LCDC_HEOIMR_UOVR (0x1 << 14)
+#define LCDC_HEOIMR_VDMA (0x1 << 18)
+#define LCDC_HEOIMR_VDSCR (0x1 << 19)
+#define LCDC_HEOIMR_VADD (0x1 << 20)
+#define LCDC_HEOIMR_VDONE (0x1 << 21)
+#define LCDC_HEOIMR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOISR 0x0298
+#define LCDC_HEOISR_DMA (0x1 << 2)
+#define LCDC_HEOISR_DSCR (0x1 << 3)
+#define LCDC_HEOISR_ADD (0x1 << 4)
+#define LCDC_HEOISR_DONE (0x1 << 5)
+#define LCDC_HEOISR_OVR (0x1 << 6)
+#define LCDC_HEOISR_UDMA (0x1 << 10)
+#define LCDC_HEOISR_UDSCR (0x1 << 11)
+#define LCDC_HEOISR_UADD (0x1 << 12)
+#define LCDC_HEOISR_UDONE (0x1 << 13)
+#define LCDC_HEOISR_UOVR (0x1 << 14)
+#define LCDC_HEOISR_VDMA (0x1 << 18)
+#define LCDC_HEOISR_VDSCR (0x1 << 19)
+#define LCDC_HEOISR_VADD (0x1 << 20)
+#define LCDC_HEOISR_VDONE (0x1 << 21)
+#define LCDC_HEOISR_VOVR (0x1 << 22)
+
+#define ATMEL_LCDC_HEOHEAD 0x029C
+
+#define ATMEL_LCDC_HEOADDR 0x02A0
+
+#define ATMEL_LCDC_HEOCTRL 0x02A4
+#define LCDC_HEOCTRL_DFETCH (0x1 << 0)
+#define LCDC_HEOCTRL_LFETCH (0x1 << 1)
+#define LCDC_HEOCTRL_DMAIEN (0x1 << 2)
+#define LCDC_HEOCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_HEOCTRL_ADDIEN (0x1 << 4)
+#define LCDC_HEOCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEONEXT 0x02A8
+
+#define ATMEL_LCDC_HEOUHEAD 0x02AC
+
+#define ATMEL_LCDC_HEOUADDR 0x02B0
+
+#define ATMEL_LCDC_HEOUCTRL 0x02B4
+#define LCDC_HEOUCTRL_UDFETCH (0x1 << 0)
+#define LCDC_HEOUCTRL_UDMAIEN (0x1 << 2)
+#define LCDC_HEOUCTRL_UDSCRIEN (0x1 << 3)
+#define LCDC_HEOUCTRL_UADDIEN (0x1 << 4)
+#define LCDC_HEOUCTRL_UDONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEOUNEXT 0x02B8
+
+#define ATMEL_LCDC_HEOVHEAD 0x02BC
+
+#define ATMEL_LCDC_HEOVADDR 0x02C0
+
+#define ATMEL_LCDC_HEOVCTRL 0x02C4
+#define LCDC_HEOVCTRL_VDFETCH (0x1 << 0)
+#define LCDC_HEOVCTRL_VDMAIEN (0x1 << 2)
+#define LCDC_HEOVCTRL_VDSCRIEN (0x1 << 3)
+#define LCDC_HEOVCTRL_VADDIEN (0x1 << 4)
+#define LCDC_HEOVCTRL_VDONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HEOVNEXT 0x02C8
+
+#define ATMEL_LCDC_HEOCFG0 0x02CC
+#define LCDC_HEOCFG0_BLEN_OFFSET 4
+#define LCDC_HEOCFG0_BLEN (0x3 << LCDC_HEOCFG0_BLEN_OFFSET)
+#define LCDC_HEOCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_HEOCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_HEOCFG0_BLENUV_OFFSET 6
+#define LCDC_HEOCFG0_BLENUV (0x3 << LCDC_HEOCFG0_BLENUV_OFFSET)
+#define LCDC_HEOCFG0_BLENUV_AHB_SINGLE (0x0 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR4 (0x1 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR8 (0x2 << 6)
+#define LCDC_HEOCFG0_BLENUV_AHB_INCR16 (0x3 << 6)
+#define LCDC_HEOCFG0_DLBO (0x1 << 8)
+#define LCDC_HEOCFG0_ROTDIS (0x1 << 12)
+#define LCDC_HEOCFG0_LOCKDIS (0x1 << 13)
+
+#define ATMEL_LCDC_HEOCFG1 0x02D0
+#define LCDC_HEOCFG1_CLUTEN (0x1 << 0)
+#define LCDC_HEOCFG1_YUVEN (0x1 << 1)
+#define LCDC_HEOCFG1_RGBMODE_OFFSET 4
+#define LCDC_HEOCFG1_RGBMODE (0xf << LCDC_HEOCFG1_RGBMODE_OFFSET)
+#define LCDC_HEOCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_HEOCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_HEOCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_HEOCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_HEOCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_HEOCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_HEOCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_HEOCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_HEOCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_HEOCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_HEOCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_HEOCFG1_CLUTMODE_OFFSET 8
+#define LCDC_HEOCFG1_CLUTMODE (0x3 << LCDC_HEOCFG1_CLUTMODE_OFFSET)
+#define LCDC_HEOCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_HEOCFG1_CLUTMODE_8BPP (0x3 << 8)
+#define LCDC_HEOCFG1_YUVMODE_OFFSET 12
+#define LCDC_HEOCFG1_YUVMODE (0xf << LCDC_HEOCFG1_YUVMODE_OFFSET)
+#define LCDC_HEOCFG1_YUVMODE_32BPP_AYCBCR (0x0 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE0 (0x1 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE1 (0x2 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE2 (0x3 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_MODE3 (0x4 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_SEMIPLANAR (0x5 << 12)
+#define LCDC_HEOCFG1_YUVMODE_16BPP_YCBCR_PLANAR (0x6 << 12)
+#define LCDC_HEOCFG1_YUVMODE_12BPP_YCBCR_SEMIPLANAR (0x7 << 12)
+#define LCDC_HEOCFG1_YUVMODE_12BPP_YCBCR_PLANAR (0x8 << 12)
+#define LCDC_HEOCFG1_YUV422ROT (0x1 << 16)
+#define LCDC_HEOCFG1_YUV422SWP (0x1 << 17)
+
+#define ATMEL_LCDC_HEOCFG2 0x02D4
+#define LCDC_HEOCFG2_XOFFSET_OFFSET 0
+#define LCDC_HEOCFG2_XOFFSET (0x7ff << LCDC_HEOCFG2_XOFFSET_OFFSET)
+#define LCDC_HEOCFG2_YOFFSET_OFFSET 16
+#define LCDC_HEOCFG2_YOFFSET (0x7ff << LCDC_HEOCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG3 0x02D8
+#define LCDC_HEOCFG3_XSIZE_OFFSET 0
+#define LCDC_HEOCFG3_XSIZE (0x7ff << LCDC_HEOCFG3_XSIZE_OFFSET)
+#define LCDC_HEOCFG3_YSIZE_OFFSET 16
+#define LCDC_HEOCFG3_YSIZE (0x7ff << LCDC_HEOCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG4 0x02DC
+#define LCDC_HEOCFG4_XMEM_SIZE_OFFSET 0
+#define LCDC_HEOCFG4_XMEM_SIZE (0x7ff << LCDC_HEOCFG4_XMEM_SIZE_OFFSET)
+#define LCDC_HEOCFG4_YMEM_SIZE_OFFSET 16
+#define LCDC_HEOCFG4_YMEM_SIZE (0x7ff << LCDC_HEOCFG4_YMEM_SIZE_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG5 0x02E0
+
+#define ATMEL_LCDC_HEOCFG6 0x02E4
+
+#define ATMEL_LCDC_HEOCFG7 0x02E8
+
+#define ATMEL_LCDC_HEOCFG8 0x02EC
+
+#define ATMEL_LCDC_HEOCFG9 0x02F0
+#define LCDC_HEOCFG9_BDEF_OFFSET 0
+#define LCDC_HEOCFG9_BDEF (0xff << LCDC_HEOCFG9_BDEF_OFFSET)
+#define LCDC_HEOCFG9_GDEF_OFFSET 8
+#define LCDC_HEOCFG9_GDEF (0xff << LCDC_HEOCFG9_GDEF_OFFSET)
+#define LCDC_HEOCFG9_RDEF_OFFSET 16
+#define LCDC_HEOCFG9_RDEF (0xff << LCDC_HEOCFG9_RDEF_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG10 0x02F4
+#define LCDC_HEOCFG10_BKEY_OFFSET 0
+#define LCDC_HEOCFG10_BKEY (0xff << LCDC_HEOCFG10_BKEY_OFFSET)
+#define LCDC_HEOCFG10_GKEY_OFFSET 8
+#define LCDC_HEOCFG10_GKEY (0xff << LCDC_HEOCFG10_GKEY_OFFSET)
+#define LCDC_HEOCFG10_RKEY_OFFSET 16
+#define LCDC_HEOCFG10_RKEY (0xff << LCDC_HEOCFG10_RKEY_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG11 0x02F8
+#define LCDC_HEOCFG11_BMASK_OFFSET 0
+#define LCDC_HEOCFG11_BMASK (0xff << LCDC_HEOCFG11_BMASK_OFFSET)
+#define LCDC_HEOCFG11_GMASK_OFFSET 8
+#define LCDC_HEOCFG11_GMASK (0xff << LCDC_HEOCFG11_GMASK_OFFSET)
+#define LCDC_HEOCFG11_RMASK_OFFSET 16
+#define LCDC_HEOCFG11_RMASK (0xff << LCDC_HEOCFG11_RMASK_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG12 0x02FC
+#define LCDC_HEOCFG12_CRKEY (0x1 << 0)
+#define LCDC_HEOCFG12_INV (0x1 << 1)
+#define LCDC_HEOCFG12_ITER2BL (0x1 << 2)
+#define LCDC_HEOCFG12_ITER (0x1 << 3)
+#define LCDC_HEOCFG12_REVALPHA (0x1 << 4)
+#define LCDC_HEOCFG12_GAEN (0x1 << 5)
+#define LCDC_HEOCFG12_LAEN (0x1 << 6)
+#define LCDC_HEOCFG12_OVR (0x1 << 7)
+#define LCDC_HEOCFG12_DMA (0x1 << 8)
+#define LCDC_HEOCFG12_REP (0x1 << 9)
+#define LCDC_HEOCFG12_DSTKEY (0x1 << 10)
+#define LCDC_HEOCFG12_VIDPRI (0x1 << 12)
+#define LCDC_HEOCFG12_GA_OFFSET 16
+#define LCDC_HEOCFG12_GA (0xff << LCDC_HEOCFG12_GA_OFFSET)
+
+#define ATMEL_LCDC_HEOCFG13 0x0300
+#define LCDC_HEOCFG13_XFACTOR_OFFSET 0
+#define LCDC_HEOCFG13_XFACTOR (0x1fff << LCDC_HEOCFG13_XFACTOR_OFFSET)
+#define LCDC_HEOCFG13_YFACTOR_OFFSET 16
+#define LCDC_HEOCFG13_YFACTOR (0x1fff << LCDC_HEOCFG13_YFACTOR_OFFSET)
+#define LCDC_HEOCFG13_SCALEN (0x1 << 31)
+
+#define ATMEL_LCDC_HEOCFG14 0x0304
+#define LCDC_HEOCFG14_CSCRY_OFFSET 0
+#define LCDC_HEOCFG14_CSCRY (0x3ff << LCDC_HEOCFG14_CSCRY_OFFSET)
+#define LCDC_HEOCFG14_CSCRU_OFFSET 10
+#define LCDC_HEOCFG14_CSCRU (0x3ff << LCDC_HEOCFG14_CSCRU_OFFSET)
+#define LCDC_HEOCFG14_CSCRV_OFFSET 20
+#define LCDC_HEOCFG14_CSCRV (0x3ff << LCDC_HEOCFG14_CSCRV_OFFSET)
+#define LCDC_HEOCFG14_CSCYOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HEOCFG15 0x0308
+#define LCDC_HEOCFG15_CSCGY_OFFSET 0
+#define LCDC_HEOCFG15_CSCGY (0x3ff << LCDC_HEOCFG15_CSCGY_OFFSET)
+#define LCDC_HEOCFG15_CSCGU_OFFSET 10
+#define LCDC_HEOCFG15_CSCGU (0x3ff << LCDC_HEOCFG15_CSCGU_OFFSET)
+#define LCDC_HEOCFG15_CSCGV_OFFSET 20
+#define LCDC_HEOCFG15_CSCGV (0x3ff << LCDC_HEOCFG15_CSCGV_OFFSET)
+#define LCDC_HEOCFG15_CSCUOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HEOCFG16 0x030C
+#define LCDC_HEOCFG16_CSCBY_OFFSET 0
+#define LCDC_HEOCFG16_CSCBY (0x3ff << LCDC_HEOCFG16_CSCBY_OFFSET)
+#define LCDC_HEOCFG16_CSCBU_OFFSET 10
+#define LCDC_HEOCFG16_CSCBU (0x3ff << LCDC_HEOCFG16_CSCBU_OFFSET)
+#define LCDC_HEOCFG16_CSCBV_OFFSET 20
+#define LCDC_HEOCFG16_CSCBV (0x3ff << LCDC_HEOCFG16_CSCBV_OFFSET)
+#define LCDC_HEOCFG16_CSCVOFF (0x1 << 30)
+
+#define ATMEL_LCDC_HCRCHER 0x0340
+#define LCDC_HCRCHER_CHEN (0x1 << 0)
+#define LCDC_HCRCHER_UPDATEEN (0x1 << 1)
+#define LCDC_HCRCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_HCRCHDR 0x0344
+#define LCDC_HCRCHDR_CHDIS (0x1 << 0)
+#define LCDC_HCRCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_HCRCHSR 0x0348
+#define LCDC_HCRCHSR_CHSR (0x1 << 0)
+#define LCDC_HCRCHSR_UPDATESR (0x1 << 1)
+#define LCDC_HCRCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_HCRIER 0x034C
+#define LCDC_HCRIER_DMA (0x1 << 2)
+#define LCDC_HCRIER_DSCR (0x1 << 3)
+#define LCDC_HCRIER_ADD (0x1 << 4)
+#define LCDC_HCRIER_DONE (0x1 << 5)
+#define LCDC_HCRIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRIDR 0x0350
+#define LCDC_HCRIDR_DMA (0x1 << 2)
+#define LCDC_HCRIDR_DSCR (0x1 << 3)
+#define LCDC_HCRIDR_ADD (0x1 << 4)
+#define LCDC_HCRIDR_DONE (0x1 << 5)
+#define LCDC_HCRIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRIMR 0x0354
+#define LCDC_HCRIMR_DMA (0x1 << 2)
+#define LCDC_HCRIMR_DSCR (0x1 << 3)
+#define LCDC_HCRIMR_ADD (0x1 << 4)
+#define LCDC_HCRIMR_DONE (0x1 << 5)
+#define LCDC_HCRIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRISR 0x0358
+#define LCDC_HCRISR_DMA (0x1 << 2)
+#define LCDC_HCRISR_DSCR (0x1 << 3)
+#define LCDC_HCRISR_ADD (0x1 << 4)
+#define LCDC_HCRISR_DONE (0x1 << 5)
+#define LCDC_HCRISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_HCRHEAD 0x035C
+
+#define ATMEL_LCDC_HCRADDR 0x0360
+
+#define ATMEL_LCDC_HCRCTRL 0x0364
+#define LCDC_HCRCTRL_DFETCH (0x1 << 0)
+#define LCDC_HCRCTRL_LFETCH (0x1 << 1)
+#define LCDC_HCRCTRL_DMAIEN (0x1 << 2)
+#define LCDC_HCRCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_HCRCTRL_ADDIEN (0x1 << 4)
+#define LCDC_HCRCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_HCRNEXT 0x0368
+
+#define ATMEL_LCDC_HCRCFG0 0x036C
+#define LCDC_HCRCFG0_BLEN_OFFSET 4
+#define LCDC_HCRCFG0_BLEN (0x3 << LCDC_HCRCFG0_BLEN_OFFSET)
+#define LCDC_HCRCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_HCRCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_HCRCFG0_DLBO (0x1 << 8)
+
+#define ATMEL_LCDC_HCRCFG1 0x0370
+#define LCDC_HCRCFG1_CLUTEN (0x1 << 0)
+#define LCDC_HCRCFG1_RGBMODE_OFFSET 4
+#define LCDC_HCRCFG1_RGBMODE (0xf << LCDC_HCRCFG1_RGBMODE_OFFSET)
+#define LCDC_HCRCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_HCRCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_HCRCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_HCRCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_HCRCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_HCRCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_HCRCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_HCRCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_HCRCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_HCRCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_HCRCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_HCRCFG1_CLUTMODE_OFFSET 8
+#define LCDC_HCRCFG1_CLUTMODE (0x3 << LCDC_HCRCFG1_CLUTMODE_OFFSET)
+#define LCDC_HCRCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_HCRCFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_HCRCFG2 0x0374
+#define LCDC_HCRCFG2_XOFFSET_OFFSET 0
+#define LCDC_HCRCFG2_XOFFSET (0x7ff << LCDC_HCRCFG2_XOFFSET_OFFSET)
+#define LCDC_HCRCFG2_YOFFSET_OFFSET 16
+#define LCDC_HCRCFG2_YOFFSET (0x7ff << LCDC_HCRCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG3 0x0378
+#define LCDC_HCRCFG3_XSIZE_OFFSET 0
+#define LCDC_HCRCFG3_XSIZE (0x7f << LCDC_HCRCFG3_XSIZE_OFFSET)
+#define LCDC_HCRCFG3_YSIZE_OFFSET 16
+#define LCDC_HCRCFG3_YSIZE (0x7f << LCDC_HCRCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG4 0x037C
+
+#define ATMEL_LCDC_HCRCFG6 0x0384
+#define LCDC_HCRCFG6_BDEF_OFFSET 0
+#define LCDC_HCRCFG6_BDEF (0xff << LCDC_HCRCFG6_BDEF_OFFSET)
+#define LCDC_HCRCFG6_GDEF_OFFSET 8
+#define LCDC_HCRCFG6_GDEF (0xff << LCDC_HCRCFG6_GDEF_OFFSET)
+#define LCDC_HCRCFG6_RDEF_OFFSET 16
+#define LCDC_HCRCFG6_RDEF (0xff << LCDC_HCRCFG6_RDEF_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG7 0x0388
+#define LCDC_HCRCFG7_BKEY_OFFSET 0
+#define LCDC_HCRCFG7_BKEY (0xff << LCDC_HCRCFG7_BKEY_OFFSET)
+#define LCDC_HCRCFG7_GKEY_OFFSET 8
+#define LCDC_HCRCFG7_GKEY (0xff << LCDC_HCRCFG7_GKEY_OFFSET)
+#define LCDC_HCRCFG7_RKEY_OFFSET 16
+#define LCDC_HCRCFG7_RKEY (0xff << LCDC_HCRCFG7_RKEY_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG8 0x038C
+#define LCDC_HCRCFG8_BMASK_OFFSET 0
+#define LCDC_HCRCFG8_BMASK (0xff << LCDC_HCRCFG8_BMASK_OFFSET)
+#define LCDC_HCRCFG8_GMASK_OFFSET 8
+#define LCDC_HCRCFG8_GMASK (0xff << LCDC_HCRCFG8_GMASK_OFFSET)
+#define LCDC_HCRCFG8_RMASK_OFFSET 16
+#define LCDC_HCRCFG8_RMASK (0xff << LCDC_HCRCFG8_RMASK_OFFSET)
+
+#define ATMEL_LCDC_HCRCFG9 0x0390
+#define LCDC_HCRCFG9_CRKEY (0x1 << 0)
+#define LCDC_HCRCFG9_INV (0x1 << 1)
+#define LCDC_HCRCFG9_ITER2BL (0x1 << 2)
+#define LCDC_HCRCFG9_ITER (0x1 << 3)
+#define LCDC_HCRCFG9_REVALPHA (0x1 << 4)
+#define LCDC_HCRCFG9_GAEN (0x1 << 5)
+#define LCDC_HCRCFG9_LAEN (0x1 << 6)
+#define LCDC_HCRCFG9_OVR (0x1 << 7)
+#define LCDC_HCRCFG9_DMA (0x1 << 8)
+#define LCDC_HCRCFG9_REP (0x1 << 9)
+#define LCDC_HCRCFG9_DSTKEY (0x1 << 10)
+#define LCDC_HCRCFG9_GA_OFFSET 16
+#define LCDC_HCRCFG9_GA_Msk (0xff << LCDC_HCRCFG9_GA_OFFSET)
+
+#define ATMEL_LCDC_BASECLUT 0x400
+#define ATMEL_LCDC2_BASECLUT 0x600
+#define LCDC_BASECLUT_BCLUT_OFFSET 0
+#define LCDC_BASECLUT_BCLUT (0xff << LCDC_BASECLUT_BCLUT_OFFSET)
+#define LCDC_BASECLUT_GCLUT_OFFSET 8
+#define LCDC_BASECLUT_GCLUT (0xff << LCDC_BASECLUT_GCLUT_OFFSET)
+#define LCDC_BASECLUT_RCLUT_OFFSET 16
+#define LCDC_BASECLUT_RCLUT (0xff << LCDC_BASECLUT_RCLUT_OFFSET)
+
+#define ATMEL_LCDC_OVR1CLUT 0x800
+#define ATMEL_LCDC2_OVR1CLUT 0xa00
+#define LCDC_OVR1CLUT_BCLUT_OFFSET 0
+#define LCDC_OVR1CLUT_BCLUT (0xff << LCDC_OVR1CLUT_BCLUT_OFFSET)
+#define LCDC_OVR1CLUT_GCLUT_OFFSET 8
+#define LCDC_OVR1CLUT_GCLUT (0xff << LCDC_OVR1CLUT_GCLUT_OFFSET)
+#define LCDC_OVR1CLUT_RCLUT_OFFSET 16
+#define LCDC_OVR1CLUT_RCLUT (0xff << LCDC_OVR1CLUT_RCLUT_OFFSET)
+#define LCDC_OVR1CLUT_ACLUT_OFFSET 24
+#define LCDC_OVR1CLUT_ACLUT (0xff << LCDC_OVR1CLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_OVR2CLUT 0xe00
+#define LCDC_OVR2CLUT_BCLUT_OFFSET 0
+#define LCDC_OVR2CLUT_BCLUT (0xff << LCDC_OVR2CLUT_BCLUT_OFFSET)
+#define LCDC_OVR2CLUT_GCLUT_OFFSET 8
+#define LCDC_OVR2CLUT_GCLUT (0xff << LCDC_OVR2CLUT_GCLUT_OFFSET)
+#define LCDC_OVR2CLUT_RCLUT_OFFSET 16
+#define LCDC_OVR2CLUT_RCLUT (0xff << LCDC_OVR2CLUT_RCLUT_OFFSET)
+#define LCDC_OVR2CLUT_ACLUT_OFFSET 24
+#define LCDC_OVR2CLUT_ACLUT (0xff << LCDC_OVR2CLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_HEOCLUT 0x1000
+#define ATMEL_LCDC2_HEOCLUT 0x1200
+#define LCDC_HEOCLUT_BCLUT_OFFSET 0
+#define LCDC_HEOCLUT_BCLUT (0xff << LCDC_HEOCLUT_BCLUT_OFFSET)
+#define LCDC_HEOCLUT_GCLUT_OFFSET 8
+#define LCDC_HEOCLUT_GCLUT (0xff << LCDC_HEOCLUT_GCLUT_OFFSET)
+#define LCDC_HEOCLUT_RCLUT_OFFSET 16
+#define LCDC_HEOCLUT_RCLUT (0xff << LCDC_HEOCLUT_RCLUT_OFFSET)
+#define LCDC_HEOCLUT_ACLUT_OFFSET 24
+#define LCDC_HEOCLUT_ACLUT (0xff << LCDC_HEOCLUT_ACLUT_OFFSET)
+
+#define ATMEL_LCDC_HCRCLUT 0x1400
+#define ATMEL_LCDC2_HCRCLUT 0x1600
+#define LCDC_HCRCLUT_BCLUT_OFFSET 0
+#define LCDC_HCRCLUT_BCLUT (0xff << LCDC_HCRCLUT_BCLUT_OFFSET)
+#define LCDC_HCRCLUT_GCLUT_OFFSET 8
+#define LCDC_HCRCLUT_GCLUT (0xff << LCDC_HCRCLUT_GCLUT_OFFSET)
+#define LCDC_HCRCLUT_RCLUT_OFFSET 16
+#define LCDC_HCRCLUT_RCLUT (0xff << LCDC_HCRCLUT_RCLUT_OFFSET)
+#define LCDC_HCRCLUT_ACLUT_OFFSET 24
+#define LCDC_HCRCLUT_ACLUT (0xff << LCDC_HCRCLUT_ACLUT_OFFSET)
+
+/* Base layer CLUT */
+#define ATMEL_HLCDC_LUT 0x0400
+
+
+static inline void hlcdc_write(struct drm_device *dev, u32 reg, u32 data)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ iowrite32(data, priv->mmio + reg);
+}
+
+static inline u32 hlcdc_read(struct drm_device *dev, u32 reg)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ return ioread32(priv->mmio + reg);
+}
+
+#endif /* __ATMEL_HLCDC4_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
new file mode 100644
index 0000000..143ba72
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
@@ -0,0 +1,92 @@
+/*
+ * atmel_hlcdc_backlight.c -- Backlight driver for the atmel HLCDC controller
+ *
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/backlight.h>
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+
+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
+
+
+static int get_brightness(struct backlight_device *backlight)
+{
+ struct drm_device *dev = bl_get_data(backlight);
+
+ return (hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & LCDC_LCDCFG6_PWMCVAL)
+ >> LCDC_LCDCFG6_PWMCVAL_OFFSET;
+}
+
+static int update_status(struct backlight_device *backlight)
+{
+ struct drm_device *dev = bl_get_data(backlight);
+ int brightness = backlight->props.brightness;
+ u32 reg;
+
+ if (backlight->props.power != FB_BLANK_UNBLANK ||
+ backlight->props.state & BL_CORE_SUSPENDED)
+ brightness = 0;
+
+ reg = hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & ~LCDC_LCDCFG6_PWMCVAL;
+ reg |= brightness << LCDC_LCDCFG6_PWMCVAL_OFFSET;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, reg);
+ DBG("new brightness is : %d\n", get_brightness(backlight));
+ return 0;
+}
+
+
+
+static const struct backlight_ops atmel_drm_backlight_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = update_status,
+ .get_brightness = get_brightness,
+};
+
+int atmel_drm_backlight_init(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct backlight_device *backlight;
+
+ backlight = backlight_device_register("backlight", dev->dev, dev,
+ &atmel_drm_backlight_ops , NULL);
+ if (IS_ERR(backlight)) {
+ dev_err(dev->dev, "unable to register backlight device: %ld\n",
+ PTR_ERR(backlight));
+ return PTR_ERR(backlight);
+ }
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
+ (ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
+
+ backlight->props.max_brightness = 0xFF;
+ backlight->props.brightness = get_brightness(backlight);
+ backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(backlight);
+
+ priv->backlight = backlight;
+
+ return 0;
+}
+
+void atmel_drm_backlight_exit(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+
+ backlight_device_unregister(priv->backlight);
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
new file mode 100644
index 0000000..6a99101
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_BACKLIGHT_H__
+#define __ATMEL_HLCDC_BACKLIGHT_H__
+
+int atmel_drm_backlight_init(struct drm_device *dev);
+void atmel_drm_backlight_exit(struct drm_device *dev);
+
+#endif
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
new file mode 100644
index 0000000..649fa19
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
@@ -0,0 +1,702 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ *
+ * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "drm_flip_work.h"
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+#include "atmel_hlcdc_ovl.h"
+
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+
+
+struct atmel_hlcd_dma_desc {
+ u32 address;
+ u32 control;
+ u32 next;
+ u32 dummy; /* for 64-bit alignment */
+};
+
+enum {
+ DMA_BASE = 0,
+ DMA_OVR_1,
+ DMA_OVR_2,
+ DMA_HEO,
+ DMA_HCR,
+ DMA_PP,
+ DMA_MAX
+};
+
+struct atmel_hlcdc_crtc {
+ struct drm_crtc base;
+ uint32_t dirty;
+ dma_addr_t start, end;
+ struct drm_pending_vblank_event *event;
+ int dpms;
+
+ struct atmel_hlcd_dma_desc *dma_descs[DMA_MAX];
+ dma_addr_t dma_descs_phys[DMA_MAX];
+
+ /* fb currently set to scanout 0/1: */
+ struct drm_framebuffer *fb;
+
+ /* for deferred fb unref's: */
+ struct drm_flip_work unref_work;
+#ifdef USE_LUT
+ u8 lut_r[256], lut_g[256], lut_b[256];
+#endif
+};
+#define to_atmel_hlcdc_crtc(x) container_of(x, struct atmel_hlcdc_crtc, base)
+
+static void unref_worker(struct drm_flip_work *work, void *val)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc =
+ container_of(work, struct atmel_hlcdc_crtc, unref_work);
+ struct drm_device *dev = atmel_hlcdc_crtc->base.dev;
+
+ mutex_lock(&dev->mode_config.mutex);
+ drm_framebuffer_unreference(val);
+ mutex_unlock(&dev->mode_config.mutex);
+}
+
+static void update_scanout(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+
+ struct drm_gem_cma_object *gem;
+ struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
+ unsigned int depth, bpp;
+ dma_addr_t start;
+ dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
+
+ drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
+ gem = drm_fb_cma_get_gem_obj(fb, 0);
+
+ start = gem->paddr + fb->offsets[0] +
+ (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
+
+ if (hlcdc_crtc->fb != fb) {
+ struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
+ drm_framebuffer_reference(fb);
+ hlcdc_crtc->fb = fb;
+ if (oldfb) {
+ drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
+ drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
+ }
+ }
+
+ if (desc->address != start) {
+ desc->address = start;
+ desc->next = desc_phys;
+ desc->control = LCDC_OVRCTRL_DFETCH;
+ }
+
+ if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
+ hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
+ hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
+ }
+}
+
+static void start(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
+ cpu_relax();
+ hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
+ while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
+ cpu_relax();
+}
+
+static void stop(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+
+ /* Disable DISP signal */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
+ cpu_relax();
+ /* Disable synchronization */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
+ cpu_relax();
+ /* Disable pixel clock */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
+ cpu_relax();
+ /* Disable PWM */
+ hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
+ while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
+ cpu_relax();
+}
+
+static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
+
+ drm_crtc_cleanup(crtc);
+ drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
+
+ if (atmel_hlcdc_crtc->dma_descs[0])
+ dma_free_writecombine(dev->dev,
+ sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
+ atmel_hlcdc_crtc->dma_descs[0],
+ atmel_hlcdc_crtc->dma_descs_phys[0]);
+ kfree(atmel_hlcdc_crtc);
+}
+
+static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ struct drm_pending_vblank_event *event,
+ uint32_t page_flip_flags)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ if (atmel_hlcdc_crtc->event) {
+ dev_err(dev->dev, "already pending page flip!\n");
+ return -EBUSY;
+ }
+
+ crtc->fb = fb;
+ atmel_hlcdc_crtc->event = event;
+ update_scanout(crtc);
+ return 0;
+}
+
+static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+
+ /* we really only care about on or off: */
+ if (mode != DRM_MODE_DPMS_ON)
+ mode = DRM_MODE_DPMS_OFF;
+
+ if (atmel_hlcdc_crtc->dpms == mode)
+ return;
+
+ atmel_hlcdc_crtc->dpms = mode;
+
+ pm_runtime_get_sync(dev->dev);
+
+ if (mode == DRM_MODE_DPMS_ON) {
+ pm_runtime_forbid(dev->dev);
+ start(crtc);
+ } else {
+ stop(crtc);
+ pm_runtime_allow(dev->dev);
+ }
+
+ pm_runtime_put_sync(dev->dev);
+}
+
+static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
+{
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
+{
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
+{
+ u32 value = 0;
+
+ switch (depth) {
+ case 1:
+ value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 2:
+ value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 4:
+ value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 8:
+ value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
+ break;
+ case 12:
+ value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
+ break;
+ case 16:
+ value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
+ break;
+ case 18:
+ value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
+ break;
+ case 24:
+ value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
+ break;
+ case 32:
+ value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
+ break;
+ default:
+ dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
+ depth, bpp);
+ break;
+ }
+
+ return value;
+}
+
+
+void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ unsigned long value;
+ unsigned long clk_value_khz;
+
+ if (clock == 0)
+ clock = crtc->mode.clock;
+
+ pm_runtime_get_sync(dev->dev);
+
+ clk_value_khz = clk_get_rate(priv->clk) / 1000;
+
+ value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
+
+ if (value < 1) {
+ dev_notice(dev->dev, "using system clock as pixel clock\n");
+ value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
+ } else {
+ dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
+ clk_value_khz / value);
+ value = value - 2;
+ dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
+ value);
+ value = LCDC_LCDCFG0_CLKPWMSEL |
+ (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
+ | LCDC_LCDCFG0_CGDISBASE;
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
+ }
+
+ pm_runtime_put_sync(dev->dev);
+}
+
+static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ int dpms = atmel_hlcdc_crtc->dpms;
+ int hbp, hfp, hsw, vbp, vfp, vsw;
+ unsigned int depth, bpp;
+ unsigned long value;
+ int ret;
+
+ ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
+ if (WARN_ON(ret))
+ return ret;
+
+ pm_runtime_get_sync(dev->dev);
+
+ if (dpms == DRM_MODE_DPMS_ON)
+ atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
+
+ dev_dbg(dev->dev, "%s:\n", __func__);
+
+
+ /* Set pixel clock */
+ atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
+
+ /* Initialize control register 5 */
+ value = priv->default_lcdcfg5;
+ value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
+ | LCDC_LCDCFG5_DISPDLY
+ | LCDC_LCDCFG5_VSPDLYS;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+ value |= LCDC_LCDCFG5_HSPOL;
+
+ if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+ value |= LCDC_LCDCFG5_VSPOL;
+
+ dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
+
+
+ /* Configure timings: */
+ hbp = MAX(mode->htotal - mode->hsync_end, 1);
+ hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
+ hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
+ vbp = MAX(mode->vtotal - mode->vsync_end, 0);
+ vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
+ vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
+
+ DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
+ mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
+
+ /* Vertical & Horizontal Timing */
+ value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
+ value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
+
+ value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
+ value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
+
+ value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
+ value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
+
+ /* Display size */
+ value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
+ value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
+ dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
+ hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
+
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
+ LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
+
+ drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
+ atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
+ hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
+
+ /* Disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, ~0UL);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, ~0UL);
+ /* Enable BASE LAYER overflow interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
+ /* Enable FIFO error interrupt and the global BASE LAYER interrupt*/
+ hlcdc_write(dev, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
+ LCDC_LCDIER_BASEIE);
+
+
+ update_scanout(crtc);
+
+ atmel_hlcdc_crtc_dpms(crtc, dpms);
+
+ pm_runtime_put_sync(dev->dev);
+ return 0;
+}
+
+static int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ update_scanout(crtc);
+ return 0;
+}
+
+#ifdef USE_LUT
+static void atmel_hlcdc_crtc_load_lut(struct drm_crtc *crtc)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ int i;
+
+ if (!crtc->enabled)
+ return;
+
+ for (i = 0; i < 256; i++)
+ hlcdc_write(dev, ATMEL_HLCDC_LUT + (i*4),
+ (atmel_hlcdc_crtc->lut_r[i] << 16) |
+ (atmel_hlcdc_crtc->lut_g[i] << 8) |
+ (atmel_hlcdc_crtc->lut_b[i] << 0));
+}
+void atmel_hlcdc_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+ u16 blue, int regno)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+
+ atmel_hlcdc_crtc->lut_r[regno] = red;
+ atmel_hlcdc_crtc->lut_g[regno] = green;
+ atmel_hlcdc_crtc->lut_b[regno] = blue;
+}
+
+void atmel_hlcdc_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+
+ *red = atmel_hlcdc_crtc->lut_r[regno];
+ *green = atmel_hlcdc_crtc->lut_g[regno];
+ *blue = atmel_hlcdc_crtc->lut_b[regno];
+}
+#endif
+
+static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
+ .destroy = atmel_hlcdc_crtc_destroy,
+ .set_config = drm_crtc_helper_set_config,
+ .page_flip = atmel_hlcdc_crtc_page_flip,
+};
+
+static const struct drm_crtc_helper_funcs atmel_hlcdc_crtc_helper_funcs = {
+ .dpms = atmel_hlcdc_crtc_dpms,
+ .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
+ .prepare = atmel_hlcdc_crtc_prepare,
+ .commit = atmel_hlcdc_crtc_commit,
+ .mode_set = atmel_hlcdc_crtc_mode_set,
+ .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
+#ifdef USE_LUT
+ .load_lut = atmel_hlcdc_crtc_load_lut,
+#endif
+};
+
+int atmel_hlcdc_crtc_mode_valid(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
+{
+ struct atmel_hlcdc_drm_private *priv = crtc->dev->dev_private;
+ uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
+
+ /*
+ * check to see if the width is within the range that
+ * the LCD Controller physically supports
+ */
+ if (mode->hdisplay > 2048)
+ return MODE_VIRTUAL_X;
+
+ /* width must be multiple of 4 */
+ if (mode->hdisplay & 0x3)
+ return MODE_VIRTUAL_X;
+
+ if (mode->vdisplay > 2048)
+ return MODE_VIRTUAL_Y;
+
+ DBG("Processing mode %dx%d@%d with pixel clock %d",
+ mode->hdisplay, mode->vdisplay,
+ drm_mode_vrefresh(mode), mode->clock);
+
+ hbp = mode->htotal - mode->hsync_end;
+ hfp = mode->hsync_start - mode->hdisplay;
+ hsw = mode->hsync_end - mode->hsync_start;
+ vbp = mode->vtotal - mode->vsync_end;
+ vfp = mode->vsync_start - mode->vdisplay;
+ vsw = mode->vsync_end - mode->vsync_start;
+
+ if ((hbp-1) > 0x1ff) {
+ DBG("Pruning mode: Horizontal Back Porch out of range");
+ return MODE_HBLANK_WIDE;
+ }
+
+ if ((hfp-1) > 0x1ff) {
+ DBG("Pruning mode: Horizontal Front Porch out of range");
+ return MODE_HBLANK_WIDE;
+ }
+
+ if ((hsw-1) > 0x3f) {
+ DBG("Pruning mode: Horizontal Sync Width out of range");
+ return MODE_HSYNC_WIDE;
+ }
+
+ if (vbp > 0x3f) {
+ DBG("Pruning mode: Vertical Back Porch out of range");
+ return MODE_VBLANK_WIDE;
+ }
+
+ if ((vfp - 1) > 0x3f) {
+ DBG("Pruning mode: Vertical Front Porch out of range");
+ return MODE_VBLANK_WIDE;
+ }
+
+ if ((vsw - 1) > 0x3f) {
+ DBG("Pruning mode: Vertical Sync Width out of range");
+ return MODE_VSYNC_WIDE;
+ }
+
+ /*
+ * some devices have a maximum allowed pixel clock
+ * configured from the DT
+ */
+ if (mode->clock > priv->max_pixelclock) {
+ DBG("Pruning mode: pixel clock too high");
+ return MODE_CLOCK_HIGH;
+ }
+
+ return MODE_OK;
+}
+
+irqreturn_t handle_base_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_LCDISR) &
+ hlcdc_read(dev, ATMEL_LCDC_LCDIMR);
+
+ if (status & LCDC_BASEISR_OVR)
+ dev_warn(dev->dev, "base layer overflow %#x\n", status);
+
+ if (status)
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
+}
+irqreturn_t handle_ovr_irq(struct drm_device *dev, int id)
+{
+ uint32_t status = hlcdc_ovl_read(dev, id, ATMEL_LCDC_OVRISR) &
+ hlcdc_ovl_read(dev, id, ATMEL_LCDC_OVRIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_heo_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_HEOISR) &
+ hlcdc_read(dev, ATMEL_LCDC_HEOIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_hcr_irq(struct drm_device *dev)
+{
+ uint32_t status = hlcdc_read(dev, ATMEL_LCDC_HCRISR) &
+ hlcdc_read(dev, ATMEL_LCDC_HCRIMR);
+ if (status)
+ return IRQ_HANDLED;
+ return IRQ_NONE;
+}
+irqreturn_t handle_pp_irq(struct drm_device *dev)
+{
+ return IRQ_NONE;
+}
+
+irqreturn_t atmel_hlcdc_crtc_irq(struct drm_crtc *crtc)
+{
+ uint32_t status;
+ struct drm_device *dev = crtc->dev;
+
+ status = hlcdc_read(dev, ATMEL_LCDC_LCDISR) &
+ hlcdc_read(dev, ATMEL_LCDC_LCDIMR);
+ if (!status) {
+ dev_warn(dev->dev, "spurious interrupt!\n");
+ return IRQ_NONE;
+ }
+
+ if (status & LCDC_LCDISR_BASE)
+ handle_base_irq(dev);
+ if (status & LCDC_LCDISR_OVR1)
+ handle_ovr_irq(dev, 0);
+ if (status & LCDC_LCDISR_OVR2)
+ handle_ovr_irq(dev, 1);
+ if (status & LCDC_LCDISR_HEO)
+ handle_heo_irq(dev);
+ if (status & LCDC_LCDISR_HCR)
+ handle_hcr_irq(dev);
+ if (status & LCDC_LCDISR_PP)
+ handle_pp_irq(dev);
+
+ if (status & LCDC_LCDISR_FIFOERR)
+ dev_warn(dev->dev, "FIFO underflow %#x\n", status);
+
+ return IRQ_HANDLED;
+}
+
+void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *crtc,
+ struct drm_file *file)
+{
+ struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
+ struct drm_pending_vblank_event *event;
+ struct drm_device *dev = crtc->dev;
+ unsigned long flags;
+
+ /* Destroy the pending vertical blanking event associated with the
+ * pending page flip, if any, and disable vertical blanking interrupts.
+ */
+ spin_lock_irqsave(&dev->event_lock, flags);
+ event = atmel_hlcdc_crtc->event;
+ if (event && event->base.file_priv == file) {
+ atmel_hlcdc_crtc->event = NULL;
+ event->base.destroy(&event->base);
+ drm_vblank_put(dev, 0);
+ }
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+}
+
+struct drm_crtc *atmel_hlcdc_crtc_create(struct drm_device *dev)
+{
+ int i;
+ struct atmel_hlcdc_crtc *hlcdc;
+ struct drm_crtc *crtc;
+ int ret;
+
+ hlcdc = kzalloc(sizeof(struct atmel_hlcdc_crtc), GFP_KERNEL);
+ if (!hlcdc) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ crtc = &hlcdc->base;
+
+ hlcdc->dpms = DRM_MODE_DPMS_OFF;
+
+ hlcdc->dma_descs[0] = dma_alloc_writecombine(dev->dev,
+ sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
+ &(hlcdc->dma_descs_phys[0]),
+ GFP_KERNEL);
+ for (i = 1; i < DMA_MAX; i++) {
+ hlcdc->dma_descs[i] = hlcdc->dma_descs[0] + i;
+ hlcdc->dma_descs_phys[i] = hlcdc->dma_descs_phys[0] +
+ (i * sizeof(struct atmel_hlcd_dma_desc));
+ hlcdc->dma_descs[i]->address = 0;
+ hlcdc->dma_descs[i]->control = 0;
+ hlcdc->dma_descs[i]->next = 0;
+ }
+
+ ret = drm_flip_work_init(&hlcdc->unref_work, 16,
+ "unref", unref_worker);
+ if (ret) {
+ dev_err(dev->dev, "could not allocate unref FIFO\n");
+ goto fail;
+ }
+
+ ret = drm_crtc_init(dev, crtc, &atmel_hlcdc_crtc_funcs);
+ if (ret < 0)
+ goto fail;
+
+ drm_crtc_helper_add(crtc, &atmel_hlcdc_crtc_helper_funcs);
+
+ return crtc;
+
+fail:
+ atmel_hlcdc_crtc_destroy(crtc);
+ return NULL;
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
new file mode 100644
index 0000000..c8aedc8
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
@@ -0,0 +1,586 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include "atmel_hlcdc_drv.h"
+#include "atmel_hlcdc.h"
+#include "atmel_hlcdc_ovl.h"
+#include "atmel_hlcdc_panel.h"
+#include "atmel_hlcdc_backlight.h"
+
+#include "drm_fb_helper.h"
+
+static LIST_HEAD(module_list);
+static bool slave_probing;
+
+void atmel_hlcdc_module_init(struct atmel_hlcdc_module *mod, const char *name,
+ const struct atmel_hlcdc_module_ops *funcs)
+{
+ mod->name = name;
+ mod->funcs = funcs;
+ INIT_LIST_HEAD(&mod->list);
+ list_add(&mod->list, &module_list);
+}
+
+void atmel_hlcdc_module_cleanup(struct atmel_hlcdc_module *mod)
+{
+ list_del(&mod->list);
+}
+
+void atmel_hlcdc_slave_probedefer(bool defered)
+{
+ slave_probing = defered;
+}
+
+static struct of_device_id atmel_hlcdc_of_match[];
+
+static struct drm_framebuffer *atmel_hlcdc_fb_create(struct drm_device *dev,
+ struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd)
+{
+ return drm_fb_cma_create(dev, file_priv, mode_cmd);
+}
+
+static void atmel_hlcdc_fb_output_poll_changed(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+
+ if (priv->fbdev)
+ drm_fbdev_cma_hotplug_event(priv->fbdev);
+}
+
+static const struct drm_mode_config_funcs mode_config_funcs = {
+ .fb_create = atmel_hlcdc_fb_create,
+ .output_poll_changed = atmel_hlcdc_fb_output_poll_changed,
+};
+
+static int modeset_init(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct atmel_hlcdc_module *mod;
+
+ atmel_drm_backlight_init(dev);
+
+ drm_mode_config_init(dev);
+
+ priv->crtc = atmel_hlcdc_crtc_create(dev);
+
+ list_for_each_entry(mod, &module_list, list) {
+ DBG("loading module: %s", mod->name);
+ mod->funcs->modeset_init(mod, dev);
+ }
+
+ if ((priv->num_encoders == 0) || (priv->num_connectors == 0)) {
+ /* oh nos! */
+ dev_err(dev->dev, "no encoders/connectors found\n");
+ return -ENXIO;
+ }
+
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+ dev->mode_config.funcs = &mode_config_funcs;
+ return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct atmel_hlcdc_drm_private *priv = container_of(nb,
+ struct atmel_hlcdc_drm_private, freq_transition);
+
+ if (val == CPUFREQ_POSTCHANGE) {
+ if (priv->lcd_fck_rate != clk_get_rate(priv->clk)) {
+ priv->lcd_fck_rate = clk_get_rate(priv->clk);
+ atmel_hlcdc_crtc_update_clk(priv->crtc, 0);
+ }
+ }
+
+ return 0;
+}
+#endif
+
+/*
+ * DRM operations:
+ */
+
+static int atmel_hlcdc_unload(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct atmel_hlcdc_module *mod, *cur;
+
+ drm_kms_helper_poll_fini(dev);
+ drm_mode_config_cleanup(dev);
+ drm_vblank_cleanup(dev);
+
+ pm_runtime_get_sync(dev->dev);
+ drm_irq_uninstall(dev);
+ pm_runtime_put_sync(dev->dev);
+
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_unregister_notifier(&priv->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+ if (priv->clk)
+ clk_put(priv->clk);
+
+ if (priv->mmio)
+ iounmap(priv->mmio);
+
+ flush_workqueue(priv->wq);
+ destroy_workqueue(priv->wq);
+
+ dev->dev_private = NULL;
+
+ pm_runtime_disable(dev->dev);
+
+ list_for_each_entry_safe(mod, cur, &module_list, list) {
+ DBG("destroying module: %s", mod->name);
+ mod->funcs->destroy(mod);
+ }
+
+ kfree(priv);
+
+ return 0;
+}
+
+static int atmel_hlcdc_load(struct drm_device *dev, unsigned long flags)
+{
+ struct platform_device *pdev = dev->platformdev;
+ struct device_node *node = pdev->dev.of_node;
+ struct atmel_hlcdc_drm_private *priv;
+ struct atmel_hlcdc_module *mod;
+ struct resource *res;
+ u32 bpp = 0;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(dev->dev, "failed to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dev->dev_private = priv;
+
+ priv->wq = alloc_ordered_workqueue("atmel_hlcdc", 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev->dev, "failed to get memory resource\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ priv->mmio = ioremap_nocache(res->start, resource_size(res));
+ if (!priv->mmio) {
+ dev_err(dev->dev, "failed to ioremap\n");
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ priv->clk = clk_get(dev->dev, "lcdc_clk");
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev->dev, "failed to get lcd clock\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+ clk_prepare_enable(priv->clk);
+
+ priv->bus_clk = clk_get(dev->dev, "bus_clk");
+ if (IS_ERR(priv->bus_clk)) {
+ dev_dbg(dev->dev, "no bus clock defined.\n");
+ priv->bus_clk = NULL;
+ }
+ if (priv->bus_clk)
+ clk_prepare_enable(priv->bus_clk);
+
+#ifdef CONFIG_CPU_FREQ
+ priv->lcd_fck_rate = clk_get_rate(priv->clk);
+ priv->freq_transition.notifier_call = cpufreq_transition;
+ ret = cpufreq_register_notifier(&priv->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (ret) {
+ dev_err(dev->dev, "failed to register cpufreq notifier\n");
+ goto fail;
+ }
+#endif
+
+ if (of_property_read_u32(node, "default-lcdcfg5",
+ &priv->default_lcdcfg5))
+ priv->default_lcdcfg5 = LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
+
+ DBG("LCDCFG5 default value 0x%x", priv->default_lcdcfg5);
+
+ if (of_property_read_u32(node, "guard-time", &priv->guard_time))
+ priv->guard_time = 9;
+
+ DBG("Guard time Value 0x%x", priv->guard_time);
+
+ if (of_property_read_u32(node, "hlcdc,max-pixelclock",
+ &priv->max_pixelclock))
+ priv->max_pixelclock = ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK;
+
+ DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
+
+ pm_runtime_enable(dev->dev);
+
+ ret = modeset_init(dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to initialize mode setting\n");
+ goto fail;
+ }
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to initialize vblank\n");
+ goto fail;
+ }
+
+ pm_runtime_get_sync(dev->dev);
+ ret = drm_irq_install(dev);
+ pm_runtime_put_sync(dev->dev);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to install IRQ handler\n");
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, dev);
+
+ list_for_each_entry(mod, &module_list, list) {
+ DBG("%s: preferred_bpp: %d", mod->name, mod->preferred_bpp);
+ bpp = mod->preferred_bpp;
+ if (bpp > 0)
+ break;
+ }
+
+ priv->fbdev = drm_fbdev_cma_init(dev, bpp,
+ dev->mode_config.num_crtc,
+ dev->mode_config.num_connector);
+ drm_kms_helper_poll_init(dev);
+
+ return 0;
+
+fail:
+ atmel_hlcdc_unload(dev);
+ return ret;
+}
+
+static void atmel_hlcdc_preclose(struct drm_device *dev, struct drm_file *file)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ atmel_hlcdc_crtc_cancel_page_flip(priv->crtc, file);
+}
+
+static void atmel_hlcdc_lastclose(struct drm_device *dev)
+{
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ drm_fbdev_cma_restore_mode(priv->fbdev);
+}
+
+static irqreturn_t atmel_hlcdc_irq(int irq, void *arg)
+{
+ struct drm_device *dev = arg;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ return atmel_hlcdc_crtc_irq(priv->crtc);
+}
+
+static void atmel_hlcdc_irq_preinstall(struct drm_device *dev)
+{
+ /* disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HEOIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 0, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 1, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ /* read the IQR to clear all bits */
+ hlcdc_read(dev, ATMEL_LCDC_LCDISR);
+}
+
+static int atmel_hlcdc_irq_postinstall(struct drm_device *dev)
+{
+ /* enable FIFO underflow irq: */
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
+ hlcdc_write(dev, ATMEL_LCDC_LCDIER,
+ LCDC_LCDISR_BASE | LCDC_LCDISR_FIFOERR);
+
+ return 0;
+}
+
+static void atmel_hlcdc_irq_uninstall(struct drm_device *dev)
+{
+ /* disable all interrupts */
+ hlcdc_write(dev, ATMEL_LCDC_LCDIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_BASEIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HEOIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_write(dev, ATMEL_LCDC_HCRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 0, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+ hlcdc_ovl_write(dev, 1, ATMEL_LCDC_OVRIDR, 0xFFFFFFFF);
+}
+
+static int atmel_hlcdc_enable_vblank(struct drm_device *dev, int crtc)
+{
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_LCDIER_SOFIE);
+ return 0;
+}
+
+static void atmel_hlcdc_disable_vblank(struct drm_device *dev, int crtc)
+{
+ hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_LCDIER_SOFIE);
+}
+
+
+
+#if defined(CONFIG_DEBUG_FS)
+enum reg_type {
+ RW, /* normal (read write at the same address) */
+ CS, /* 'set', 'clear' and 'read' are consecutive registers */
+};
+
+static const struct {
+ const char *name;
+ uint32_t reg;
+ enum reg_type type;
+} registers[] = {
+#define REG(type, reg) { #reg, reg, type }
+ REG(RW, ATMEL_LCDC_LCDCFG0),
+ REG(RW, ATMEL_LCDC_LCDCFG1),
+ REG(RW, ATMEL_LCDC_LCDCFG2),
+ REG(RW, ATMEL_LCDC_LCDCFG3),
+ REG(RW, ATMEL_LCDC_LCDCFG4),
+ REG(RW, ATMEL_LCDC_LCDCFG5),
+ REG(RW, ATMEL_LCDC_LCDCFG6),
+ REG(CS, ATMEL_LCDC_LCDEN),
+ REG(CS, ATMEL_LCDC_LCDIER),
+ REG(CS, ATMEL_LCDC_BASEIER),
+ REG(RW, ATMEL_LCDC_BASEHEAD),
+ REG(RW, ATMEL_LCDC_BASEADDR),
+ REG(RW, ATMEL_LCDC_BASECTRL),
+ REG(RW, ATMEL_LCDC_BASENEXT),
+ REG(RW, ATMEL_LCDC_BASECFG0),
+ REG(RW, ATMEL_LCDC_BASECFG1),
+ REG(RW, ATMEL_LCDC_BASECFG2),
+ REG(RW, ATMEL_LCDC_BASECFG3),
+ REG(RW, ATMEL_LCDC_BASECFG4),
+ REG(RW, ATMEL_LCDC_BASECFG5),
+ REG(RW, ATMEL_LCDC_BASECFG6),
+
+ REG(RW, ATMEL_LCDC_LCDISR),
+ REG(RW, ATMEL_LCDC_BASEISR),
+#undef REG
+};
+
+static int atmel_hlcdc_regs_show(struct seq_file *m, void *arg)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ unsigned i;
+
+ pm_runtime_get_sync(dev->dev);
+
+ seq_printf(m, "revision: %d\n", priv->rev);
+
+ for (i = 0; i < ARRAY_SIZE(registers); i++)
+ seq_printf(m, "%s:\t %08x\n", registers[i].name,
+ hlcdc_read(dev, registers[i].reg));
+
+ pm_runtime_put_sync(dev->dev);
+
+ return 0;
+}
+
+static int atmel_hlcdc_mm_show(struct seq_file *m, void *arg)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ return drm_mm_dump_table(m, &dev->vma_offset_manager->vm_addr_space_mm);
+}
+
+static struct drm_info_list atmel_hlcdc_debugfs_list[] = {
+ { "regs", atmel_hlcdc_regs_show, 0 },
+ { "mm", atmel_hlcdc_mm_show, 0 },
+ { "fb", drm_fb_cma_debugfs_show, 0 },
+};
+
+static int atmel_hlcdc_debugfs_init(struct drm_minor *minor)
+{
+ struct drm_device *dev = minor->dev;
+ struct atmel_hlcdc_module *mod;
+ int ret;
+
+ ret = drm_debugfs_create_files(atmel_hlcdc_debugfs_list,
+ ARRAY_SIZE(atmel_hlcdc_debugfs_list),
+ minor->debugfs_root, minor);
+
+ list_for_each_entry(mod, &module_list, list)
+ if (mod->funcs->debugfs_init)
+ mod->funcs->debugfs_init(mod, minor);
+
+ if (ret) {
+ dev_err(dev->dev, "could not install atmel_hlcdc_debugfs_list\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static void atmel_hlcdc_debugfs_cleanup(struct drm_minor *minor)
+{
+ struct atmel_hlcdc_module *mod;
+ drm_debugfs_remove_files(atmel_hlcdc_debugfs_list,
+ ARRAY_SIZE(atmel_hlcdc_debugfs_list), minor);
+
+ list_for_each_entry(mod, &module_list, list)
+ if (mod->funcs->debugfs_cleanup)
+ mod->funcs->debugfs_cleanup(mod, minor);
+}
+#endif
+
+
+static const struct file_operations fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = drm_compat_ioctl,
+#endif
+ .poll = drm_poll,
+ .read = drm_read,
+ .llseek = no_llseek,
+ .mmap = drm_gem_cma_mmap,
+};
+
+static struct drm_driver atmel_hlcdc_driver = {
+ .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET,
+ .load = atmel_hlcdc_load,
+ .unload = atmel_hlcdc_unload,
+ .preclose = atmel_hlcdc_preclose,
+ .lastclose = atmel_hlcdc_lastclose,
+ .irq_handler = atmel_hlcdc_irq,
+ .irq_preinstall = atmel_hlcdc_irq_preinstall,
+ .irq_postinstall = atmel_hlcdc_irq_postinstall,
+ .irq_uninstall = atmel_hlcdc_irq_uninstall,
+ .get_vblank_counter = drm_vblank_count,
+ .enable_vblank = atmel_hlcdc_enable_vblank,
+ .disable_vblank = atmel_hlcdc_disable_vblank,
+ .gem_free_object = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+ .dumb_create = drm_gem_cma_dumb_create,
+ .dumb_map_offset = drm_gem_cma_dumb_map_offset,
+ .dumb_destroy = drm_gem_dumb_destroy,
+#ifdef CONFIG_DEBUG_FS
+ .debugfs_init = atmel_hlcdc_debugfs_init,
+ .debugfs_cleanup = atmel_hlcdc_debugfs_cleanup,
+#endif
+ .fops = &fops,
+ .name = "atmel_hlcdc",
+ .desc = "ATMEL HLCD Controller DRM",
+ .date = "20141504",
+ .major = 1,
+ .minor = 0,
+};
+
+/*
+ * Power management:
+ */
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_hlcdc_pm_suspend(struct device *dev)
+{
+ return 0;
+}
+
+static int atmel_hlcdc_pm_resume(struct device *dev)
+{
+ return 0;
+}
+
+static const struct dev_pm_ops atmel_hlcdc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(atmel_hlcdc_pm_suspend, atmel_hlcdc_pm_resume)
+};
+#endif
+
+/*
+ * Platform driver:
+ */
+
+static int atmel_hlcdc_pdev_probe(struct platform_device *pdev)
+{
+ /* bail out early if no DT data: */
+ if (!pdev->dev.of_node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+
+ /* defer probing if slave is in deferred probing */
+ if (slave_probing == true)
+ return -EPROBE_DEFER;
+
+ return drm_platform_init(&atmel_hlcdc_driver, pdev);
+}
+
+static int atmel_hlcdc_pdev_remove(struct platform_device *pdev)
+{
+ drm_put_dev(platform_get_drvdata(pdev));
+ return 0;
+}
+
+static struct of_device_id atmel_hlcdc_of_match[] = {
+ { .compatible = "atmel,hlcdc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, atmel_hlcdc_of_match);
+
+static struct platform_driver atmel_hlcdc_platform_driver = {
+ .probe = atmel_hlcdc_pdev_probe,
+ .remove = atmel_hlcdc_pdev_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "atmel_hlcdc",
+#ifdef CONFIG_PM_SLEEP
+ .pm = &atmel_hlcdc_pm_ops,
+#endif
+ .of_match_table = atmel_hlcdc_of_match,
+ },
+};
+
+static int __init atmel_hlcdc_drm_init(void)
+{
+ atmel_hlcdc_panel_init();
+ return platform_driver_register(&atmel_hlcdc_platform_driver);
+}
+
+static void __exit atmel_hlcdc_drm_fini(void)
+{
+ atmel_hlcdc_panel_fini();
+ platform_driver_unregister(&atmel_hlcdc_platform_driver);
+}
+
+late_initcall(atmel_hlcdc_drm_init);
+module_exit(atmel_hlcdc_drm_fini);
+
+MODULE_AUTHOR("Jean-Jacques Hiblot <jjhiblot@traphandler.com");
+MODULE_DESCRIPTION("ATMEL HLCDC DRM Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
new file mode 100644
index 0000000..e5d6a76
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_DRV_H__
+#define __ATMEL_HLCDC_DRV_H__
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/list.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+/* Defaulting to pixel clock defined on AM335x */
+#define ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK 126000
+
+
+struct atmel_hlcdc_drm_private {
+ void __iomem *mmio;
+
+ struct clk *bus_clk; /* bus clock*/
+ struct clk *clk; /* functional clock */
+ int rev; /* IP revision */
+
+ uint32_t guard_time;
+
+ uint32_t default_lcdcfg5;
+ /*
+ * Pixel Clock will be restricted to some value as
+ * defined in the device datasheet measured in KHz
+ */
+ uint32_t max_pixelclock;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+ unsigned int lcd_fck_rate;
+#endif
+
+ struct workqueue_struct *wq;
+
+ struct drm_fbdev_cma *fbdev;
+
+ struct drm_crtc *crtc;
+
+ struct backlight_device *backlight;
+
+ unsigned int num_encoders;
+ struct drm_encoder *encoders[8];
+
+ unsigned int num_connectors;
+ struct drm_connector *connectors[8];
+};
+
+/* Sub-module for display. Since we don't know at compile time what panels
+ * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
+ * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
+ * separate drivers. If they are probed and found to be present, they
+ * register themselves with atmel_hlcdc_register_module().
+ */
+struct atmel_hlcdc_module;
+
+struct atmel_hlcdc_module_ops {
+ /* create appropriate encoders/connectors: */
+ int (*modeset_init)(struct atmel_hlcdc_module *mod,
+ struct drm_device *dev);
+ void (*destroy)(struct atmel_hlcdc_module *mod);
+#ifdef CONFIG_DEBUG_FS
+ /* create debugfs nodes (can be NULL): */
+ int (*debugfs_init)(struct atmel_hlcdc_module *mod,
+ struct drm_minor *minor);
+ /* cleanup debugfs nodes (can be NULL): */
+ void (*debugfs_cleanup)(struct atmel_hlcdc_module *mod,
+ struct drm_minor *minor);
+#endif
+};
+
+struct atmel_hlcdc_module {
+ const char *name;
+ struct list_head list;
+ const struct atmel_hlcdc_module_ops *funcs;
+ unsigned int preferred_bpp;
+};
+
+void atmel_hlcdc_module_init(struct atmel_hlcdc_module *mod, const char *name,
+ const struct atmel_hlcdc_module_ops *funcs);
+void atmel_hlcdc_module_cleanup(struct atmel_hlcdc_module *mod);
+void atmel_hlcdc_slave_probedefer(bool defered);
+
+#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+
+struct drm_crtc *atmel_hlcdc_crtc_create(struct drm_device *dev);
+void atmel_hlcdc_crtc_cancel_page_flip(struct drm_crtc *crtc,
+ struct drm_file *file);
+irqreturn_t atmel_hlcdc_crtc_irq(struct drm_crtc *crtc);
+void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock);
+int atmel_hlcdc_crtc_mode_valid(struct drm_crtc *crtc,
+ struct drm_display_mode *mode);
+
+#endif /* __ATMEL_HLCDC_DRV_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
new file mode 100644
index 0000000..a54dfd5
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
@@ -0,0 +1,190 @@
+/*
+ * Header file for AT91 High end LCD Controller
+ *
+ * Data structure and register user interface
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __ATMEL_HLCD_OVL_H__
+#define __ATMEL_HLCD_OVL_H__
+
+/*
+ * OVL has a seperate resource which already starts at offset 0x100.
+ * So, these defines start at 0x0. The manual will list them at 0x100.
+ */
+
+#define ATMEL_LCDC_OVRCHER 0x0000
+#define LCDC_OVRCHER_CHEN (0x1 << 0)
+#define LCDC_OVRCHER_UPDATEEN (0x1 << 1)
+#define LCDC_OVRCHER_A2QEN (0x1 << 2)
+
+#define ATMEL_LCDC_OVRCHDR 0x0004
+#define LCDC_OVRCHDR_CHDIS (0x1 << 0)
+#define LCDC_OVRCHDR_CHRST (0x1 << 8)
+
+#define ATMEL_LCDC_OVRCHSR 0x0008
+#define LCDC_OVRCHSR_CHSR (0x1 << 0)
+#define LCDC_OVRCHSR_UPDATESR (0x1 << 1)
+#define LCDC_OVRCHSR_A2QSR (0x1 << 2)
+
+#define ATMEL_LCDC_OVRIER 0x000C
+#define LCDC_OVRIER_DMA (0x1 << 2)
+#define LCDC_OVRIER_DSCR (0x1 << 3)
+#define LCDC_OVRIER_ADD (0x1 << 4)
+#define LCDC_OVRIER_DONE (0x1 << 5)
+#define LCDC_OVRIER_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRIDR 0x0010
+#define LCDC_OVRIDR_DMA (0x1 << 2)
+#define LCDC_OVRIDR_DSCR (0x1 << 3)
+#define LCDC_OVRIDR_ADD (0x1 << 4)
+#define LCDC_OVRIDR_DONE (0x1 << 5)
+#define LCDC_OVRIDR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRIMR 0x0014
+#define LCDC_OVRIMR_DMA (0x1 << 2)
+#define LCDC_OVRIMR_DSCR (0x1 << 3)
+#define LCDC_OVRIMR_ADD (0x1 << 4)
+#define LCDC_OVRIMR_DONE (0x1 << 5)
+#define LCDC_OVRIMR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRISR 0x0018
+#define LCDC_OVRISR_DMA (0x1 << 2)
+#define LCDC_OVRISR_DSCR (0x1 << 3)
+#define LCDC_OVRISR_ADD (0x1 << 4)
+#define LCDC_OVRISR_DONE (0x1 << 5)
+#define LCDC_OVRISR_OVR (0x1 << 6)
+
+#define ATMEL_LCDC_OVRHEAD 0x001C
+
+#define ATMEL_LCDC_OVRADDR 0x0020
+
+#define ATMEL_LCDC_OVRCTRL 0x0024
+#define LCDC_OVRCTRL_DFETCH (0x1 << 0)
+#define LCDC_OVRCTRL_LFETCH (0x1 << 1)
+#define LCDC_OVRCTRL_DMAIEN (0x1 << 2)
+#define LCDC_OVRCTRL_DSCRIEN (0x1 << 3)
+#define LCDC_OVRCTRL_ADDIEN (0x1 << 4)
+#define LCDC_OVRCTRL_DONEIEN (0x1 << 5)
+
+#define ATMEL_LCDC_OVRNEXT 0x0028
+
+#define ATMEL_LCDC_OVRCFG0 0x002C
+#define LCDC_OVRCFG0_SIF (0x1 << 0)
+#define LCDC_OVRCFG0_BLEN_OFFSET 4
+#define LCDC_OVRCFG0_BLEN (0x3 << LCDC_OVRCFG0_BLEN_OFFSET)
+#define LCDC_OVRCFG0_BLEN_AHB_SINGLE (0x0 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR4 (0x1 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR8 (0x2 << 4)
+#define LCDC_OVRCFG0_BLEN_AHB_INCR16 (0x3 << 4)
+#define LCDC_OVRCFG0_DLBO (0x1 << 8)
+#define LCDC_OVRCFG0_ROTDIS (0x1 << 12)
+#define LCDC_OVRCFG0_LOCKDIS (0x1 << 13)
+
+#define ATMEL_LCDC_OVRCFG1 0x0030
+#define LCDC_OVRCFG1_CLUTEN (0x1 << 0)
+#define LCDC_OVRCFG1_RGBMODE_OFFSET 4
+#define LCDC_OVRCFG1_RGBMODE (0xf << LCDC_OVRCFG1_RGBMODE_OFFSET)
+#define LCDC_OVRCFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
+#define LCDC_OVRCFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
+#define LCDC_OVRCFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
+#define LCDC_OVRCFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
+#define LCDC_OVRCFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
+#define LCDC_OVRCFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
+#define LCDC_OVRCFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
+#define LCDC_OVRCFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
+#define LCDC_OVRCFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
+#define LCDC_OVRCFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
+#define LCDC_OVRCFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
+#define LCDC_OVRCFG1_CLUTMODE_OFFSET 8
+#define LCDC_OVRCFG1_CLUTMODE (0x3 << LCDC_OVRCFG1_CLUTMODE_OFFSET)
+#define LCDC_OVRCFG1_CLUTMODE_1BPP (0x0 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_2BPP (0x1 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_4BPP (0x2 << 8)
+#define LCDC_OVRCFG1_CLUTMODE_8BPP (0x3 << 8)
+
+#define ATMEL_LCDC_OVRCFG2 0x0034
+#define LCDC_OVRCFG2_XOFFSET_OFFSET 0
+#define LCDC_OVRCFG2_XOFFSET (0x7ff << LCDC_OVRCFG2_XOFFSET_OFFSET)
+#define LCDC_OVRCFG2_YOFFSET_OFFSET 16
+#define LCDC_OVRCFG2_YOFFSET (0x7ff << LCDC_OVRCFG2_YOFFSET_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG3 0x0038
+#define LCDC_OVRCFG3_XSIZE_OFFSET 0
+#define LCDC_OVRCFG3_XSIZE (0x7ff << LCDC_OVRCFG3_XSIZE_OFFSET)
+#define LCDC_OVRCFG3_YSIZE_OFFSET 16
+#define LCDC_OVRCFG3_YSIZE (0x7ff << LCDC_OVRCFG3_YSIZE_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG4 0x003C
+
+#define ATMEL_LCDC_OVRCFG5 0x0040
+
+#define ATMEL_LCDC_OVRCFG6 0x0044
+#define LCDC_OVRCFG6_BDEF_OFFSET 0
+#define LCDC_OVRCFG6_BDEF (0xff << LCDC_OVRCFG6_BDEF_OFFSET)
+#define LCDC_OVRCFG6_GDEF_OFFSET 8
+#define LCDC_OVRCFG6_GDEF (0xff << LCDC_OVRCFG6_GDEF_OFFSET)
+#define LCDC_OVRCFG6_RDEF_OFFSET 16
+#define LCDC_OVRCFG6_RDEF (0xff << LCDC_OVRCFG6_RDEF_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG7 0x0048
+#define LCDC_OVRCFG7_BKEY_OFFSET 0
+#define LCDC_OVRCFG7_BKEY (0xff << LCDC_OVRCFG7_BKEY_OFFSET)
+#define LCDC_OVRCFG7_GKEY_OFFSET 8
+#define LCDC_OVRCFG7_GKEY (0xff << LCDC_OVRCFG7_GKEY_OFFST)
+#define LCDC_OVRCFG7_RKEY_OFFSET 16
+#define LCDC_OVRCFG7_RKEY (0xff << LCDC_OVRCFG7_RKEY_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG8 0x004C
+#define LCDC_OVRCFG8_BMASK_OFFSET 0
+#define LCDC_OVRCFG8_BMASK (0xff << LCDC_OVRCFG8_BMASK_OFFSET)
+#define LCDC_OVRCFG8_GMASK_OFFSET 8
+#define LCDC_OVRCFG8_GMASK (0xff << LCDC_OVRCFG8_GMASK_OFFSET)
+#define LCDC_OVRCFG8_RMASK_OFFSET 16
+#define LCDC_OVRCFG8_RMASK (0xff << LCDC_OVRCFG8_RMASK_OFFSET)
+
+#define ATMEL_LCDC_OVRCFG9 0x0050
+#define LCDC_OVRCFG9_CRKEY (0x1 << 0)
+#define LCDC_OVRCFG9_INV (0x1 << 1)
+#define LCDC_OVRCFG9_ITER2BL (0x1 << 2)
+#define LCDC_OVRCFG9_ITER (0x1 << 3)
+#define LCDC_OVRCFG9_REVALPHA (0x1 << 4)
+#define LCDC_OVRCFG9_GAEN (0x1 << 5)
+#define LCDC_OVRCFG9_LAEN (0x1 << 6)
+#define LCDC_OVRCFG9_OVR (0x1 << 7)
+#define LCDC_OVRCFG9_DMA (0x1 << 8)
+#define LCDC_OVRCFG9_REP (0x1 << 9)
+#define LCDC_OVRCFG9_DSTKEY (0x1 << 10)
+#define LCDC_OVRCFG9_GA_OFFSET 16
+#define LCDC_OVRCFG9_GA (0xff << LCDC_OVRCFG9_GA_OFFSET)
+
+
+static inline void hlcdc_ovl_write(struct drm_device *dev, int overlay,
+ u32 reg, u32 data)
+{
+ hlcdc_write(dev, (0x100 * overlay) + 0x140 + reg, data);
+}
+
+static inline u32 hlcdc_ovl_read(struct drm_device *dev, int overlay, u32 reg)
+{
+ return hlcdc_read(dev, (0x100 * overlay) + 0x140 + reg);
+}
+
+#endif /* __ATMEL_HLCD_OVL_H__ */
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
new file mode 100644
index 0000000..b004247
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc panel driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/backlight.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include "atmel_hlcdc_drv.h"
+
+struct panel_module {
+ struct atmel_hlcdc_module base;
+ struct atmel_hlcdc_panel_info *info;
+ struct display_timings *timings;
+ struct backlight_device *backlight;
+ u32 preferred_bpp;
+ u32 enable_gpio_flags;
+ int enable_gpio;
+ int hsync_neg_pol;
+ int vsync_neg_pol;
+};
+#define to_panel_module(x) container_of(x, struct panel_module, base)
+
+
+/*
+ * Encoder:
+ */
+
+struct panel_encoder {
+ struct drm_encoder base;
+ struct panel_module *mod;
+};
+#define to_panel_encoder(x) container_of(x, struct panel_encoder, base)
+
+
+static void panel_encoder_destroy(struct drm_encoder *encoder)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ drm_encoder_cleanup(encoder);
+ kfree(panel_encoder);
+}
+
+static void panel_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+ struct backlight_device *backlight = panel_encoder->mod->backlight;
+
+ if (!backlight)
+ return;
+
+ backlight->props.power = mode == DRM_MODE_DPMS_ON
+ ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
+ backlight_update_status(backlight);
+
+ if (gpio_is_valid(panel_encoder->mod->enable_gpio)) {
+ int value = (mode == DRM_MODE_DPMS_ON) ? 1 : 0;
+
+ if (panel_encoder->mod->enable_gpio_flags & GPIO_ACTIVE_LOW)
+ value ^= 1;
+
+ gpio_set_value(panel_encoder->mod->enable_gpio, value);
+ }
+}
+
+static bool panel_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct panel_encoder *panel_encoder = to_panel_encoder(encoder);
+
+ if (panel_encoder->mod->hsync_neg_pol)
+ adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+ if (panel_encoder->mod->vsync_neg_pol)
+ adjusted_mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
+ return true;
+}
+
+static void panel_encoder_prepare(struct drm_encoder *encoder)
+{
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void panel_encoder_commit(struct drm_encoder *encoder)
+{
+ panel_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static void panel_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ /* nothing needed */
+}
+
+static const struct drm_encoder_funcs panel_encoder_funcs = {
+ .destroy = panel_encoder_destroy,
+};
+
+static const struct drm_encoder_helper_funcs panel_encoder_helper_funcs = {
+ .dpms = panel_encoder_dpms,
+ .mode_fixup = panel_encoder_mode_fixup,
+ .prepare = panel_encoder_prepare,
+ .commit = panel_encoder_commit,
+ .mode_set = panel_encoder_mode_set,
+};
+
+static struct drm_encoder *panel_encoder_create(struct drm_device *dev,
+ struct panel_module *mod)
+{
+ struct panel_encoder *panel_encoder;
+ struct drm_encoder *encoder;
+ int ret;
+
+ panel_encoder = kzalloc(sizeof(*panel_encoder), GFP_KERNEL);
+ if (!panel_encoder) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_encoder->mod = mod;
+
+ encoder = &panel_encoder->base;
+ encoder->possible_crtcs = 1;
+
+ ret = drm_encoder_init(dev, encoder, &panel_encoder_funcs,
+ DRM_MODE_ENCODER_LVDS);
+ if (ret < 0)
+ goto fail;
+
+ drm_encoder_helper_add(encoder, &panel_encoder_helper_funcs);
+
+ return encoder;
+
+fail:
+ panel_encoder_destroy(encoder);
+ return NULL;
+}
+
+/*
+ * Connector:
+ */
+
+struct panel_connector {
+ struct drm_connector base;
+
+ struct drm_encoder *encoder; /* our connected encoder */
+ struct panel_module *mod;
+};
+#define to_panel_connector(x) container_of(x, struct panel_connector, base)
+
+
+static void panel_connector_destroy(struct drm_connector *connector)
+{
+ struct panel_connector *panel_con = to_panel_connector(connector);
+ drm_connector_cleanup(connector);
+ kfree(panel_con);
+}
+
+static enum drm_connector_status panel_connector_detect(
+ struct drm_connector *connector,
+ bool force)
+{
+ return connector_status_connected;
+}
+
+static int panel_connector_get_modes(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct panel_connector *panel_con = to_panel_connector(connector);
+ struct display_timings *timings = panel_con->mod->timings;
+ int i;
+
+ for (i = 0; i < timings->num_timings; i++) {
+ struct drm_display_mode *mode = drm_mode_create(dev);
+ struct videomode vm;
+
+ if (videomode_from_timings(timings, &vm, i))
+ break;
+
+ drm_display_mode_from_videomode(&vm, mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+
+ if (timings->native_mode == i)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ }
+
+ return i;
+}
+
+static int panel_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct atmel_hlcdc_drm_private *priv = connector->dev->dev_private;
+ /* our only constraints are what the crtc can generate: */
+ return atmel_hlcdc_crtc_mode_valid(priv->crtc, mode);
+}
+
+static struct drm_encoder *panel_connector_best_encoder(
+ struct drm_connector *connector)
+{
+ struct panel_connector *panel_connector = to_panel_connector(connector);
+ return panel_connector->encoder;
+}
+
+static const struct drm_connector_funcs panel_connector_funcs = {
+ .destroy = panel_connector_destroy,
+ .dpms = drm_helper_connector_dpms,
+ .detect = panel_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs panel_connector_helper_funcs = {
+ .get_modes = panel_connector_get_modes,
+ .mode_valid = panel_connector_mode_valid,
+ .best_encoder = panel_connector_best_encoder,
+};
+
+static struct drm_connector *panel_connector_create(struct drm_device *dev,
+ struct panel_module *mod, struct drm_encoder *encoder)
+{
+ struct panel_connector *panel_connector;
+ struct drm_connector *connector;
+ int ret;
+
+ panel_connector = kzalloc(sizeof(*panel_connector), GFP_KERNEL);
+ if (!panel_connector) {
+ dev_err(dev->dev, "allocation failed\n");
+ return NULL;
+ }
+
+ panel_connector->encoder = encoder;
+ panel_connector->mod = mod;
+
+ connector = &panel_connector->base;
+
+ drm_connector_init(dev, connector, &panel_connector_funcs,
+ DRM_MODE_CONNECTOR_LVDS);
+ drm_connector_helper_add(connector, &panel_connector_helper_funcs);
+
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ ret = drm_mode_connector_attach_encoder(connector, encoder);
+ if (ret)
+ goto fail;
+
+ drm_sysfs_connector_add(connector);
+
+ return connector;
+
+fail:
+ panel_connector_destroy(connector);
+ return NULL;
+}
+
+/*
+ * Module:
+ */
+
+static int panel_modeset_init(struct atmel_hlcdc_module *mod,
+ struct drm_device *dev)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+ struct atmel_hlcdc_drm_private *priv = dev->dev_private;
+ struct drm_encoder *encoder;
+ struct drm_connector *connector;
+
+ encoder = panel_encoder_create(dev, panel_mod);
+ if (!encoder)
+ return -ENOMEM;
+
+ connector = panel_connector_create(dev, panel_mod, encoder);
+ if (!connector)
+ return -ENOMEM;
+
+ priv->encoders[priv->num_encoders++] = encoder;
+ priv->connectors[priv->num_connectors++] = connector;
+
+ return 0;
+}
+
+static void panel_destroy(struct atmel_hlcdc_module *mod)
+{
+ struct panel_module *panel_mod = to_panel_module(mod);
+
+ if (panel_mod->timings) {
+ display_timings_release(panel_mod->timings);
+ kfree(panel_mod->timings);
+ }
+
+ atmel_hlcdc_module_cleanup(mod);
+ kfree(panel_mod->info);
+ kfree(panel_mod);
+}
+
+static const struct atmel_hlcdc_module_ops panel_module_ops = {
+ .modeset_init = panel_modeset_init,
+ .destroy = panel_destroy,
+};
+
+/*
+ * Device:
+ */
+
+/* maybe move this somewhere common if it is needed by other outputs? */
+static int of_get_panel_info(struct device *dev, struct device_node *np,
+ struct panel_module *panel)
+{
+ enum of_gpio_flags flags;
+
+ int err = 0;
+
+ if (!np) {
+ pr_err("%s: no devicenode given\n", __func__);
+ return -EINVAL;
+ }
+ if (of_property_read_u32(np, "preferred-bpp",
+ &panel->preferred_bpp) < 0)
+ panel->preferred_bpp = 16;
+ panel->hsync_neg_pol = of_property_read_bool(np, "invert-hsync");
+ panel->vsync_neg_pol = of_property_read_bool(np, "invert-vsync");
+ panel->enable_gpio = of_get_named_gpio_flags(np, "enable-gpio",
+ 0, &flags);
+ if (gpio_is_valid(panel->enable_gpio)) {
+ unsigned int value;
+
+ if (flags & OF_GPIO_ACTIVE_LOW)
+ panel->enable_gpio_flags |= GPIO_ACTIVE_LOW;
+
+ err = gpio_request(panel->enable_gpio, "bkl_enable");
+ if (err < 0) {
+ dev_err(dev, "failed to request GPIO#%u: %d\n",
+ panel->enable_gpio, err);
+ return err;
+ }
+
+ value = (panel->enable_gpio_flags & GPIO_ACTIVE_LOW) != 0;
+
+ err = gpio_direction_output(panel->enable_gpio, value);
+ if (err < 0) {
+ dev_err(dev, "failed to setup GPIO%u: %d\n",
+ panel->enable_gpio, err);
+ goto free_gpio;
+ }
+ }
+
+ return 0;
+
+free_gpio:
+ gpio_free(panel->enable_gpio);
+ return err;
+}
+
+static struct of_device_id panel_of_match[];
+
+static int panel_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct panel_module *panel_mod;
+ struct atmel_hlcdc_module *mod;
+ struct pinctrl *pinctrl;
+ int ret = -EINVAL;
+
+ /* bail out early if no DT data: */
+ if (!node) {
+ dev_err(&pdev->dev, "device-tree data is missing\n");
+ return -ENXIO;
+ }
+ panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
+ if (!panel_mod)
+ return -ENOMEM;
+
+ mod = &panel_mod->base;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "pins are not configured\n");
+
+ panel_mod->timings = of_get_display_timings(node);
+ if (!panel_mod->timings) {
+ dev_err(&pdev->dev, "could not get panel timings\n");
+ goto fail;
+ }
+
+ if (of_get_panel_info(&pdev->dev, node, panel_mod) < 0) {
+ dev_err(&pdev->dev, "could not get panel info\n");
+ goto fail;
+ }
+
+ mod->preferred_bpp = panel_mod->preferred_bpp;
+
+ panel_mod->backlight = of_find_backlight_by_node(node);
+ if (panel_mod->backlight)
+ dev_info(&pdev->dev, "found backlight\n");
+
+
+ atmel_hlcdc_module_init(mod, "panel", &panel_module_ops);
+
+ return 0;
+
+fail:
+ panel_destroy(mod);
+ return ret;
+}
+
+static int panel_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct of_device_id panel_of_match[] = {
+ { .compatible = "atmel,hlcdc,panel", },
+ { },
+};
+
+struct platform_driver panel_driver = {
+ .probe = panel_probe,
+ .remove = panel_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "panel",
+ .of_match_table = panel_of_match,
+ },
+};
+
+int __init atmel_hlcdc_panel_init(void)
+{
+ return platform_driver_register(&panel_driver);
+}
+
+void __exit atmel_hlcdc_panel_fini(void)
+{
+ platform_driver_unregister(&panel_driver);
+}
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
new file mode 100644
index 0000000..0f66169
--- /dev/null
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2014 Traphandler
+ * Copyright (C) 2012 Texas Instruments
+ *
+ * Base on the tilcdc panel driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ATMEL_HLCDC_PANEL_H__
+#define __ATMEL_HLCDC_PANEL_H__
+
+/* sub-module for generic lcd panel output */
+
+int atmel_hlcdc_panel_init(void);
+void atmel_hlcdc_panel_fini(void);
+
+#endif /* __ATMEL_HLCDC_PANEL_H__ */
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 2/3] atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
2014-04-18 9:45 ` Jean-Jacques Hiblot
(?)
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel, Jean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 85d3027..2a2bced 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -51,6 +51,17 @@
};
};
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,hlcdc";
+ reg = <0xf0030000 0x4000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>;
+ clock-names = "lcdc_clk","bus_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "disabled";
+ };
+
pmc: pmc@fffffc00 {
periphck {
lcdc_clk: lcdc_clk {
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 2/3] atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 85d3027..2a2bced 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -51,6 +51,17 @@
};
};
+ hlcdc: hlcdc at f0030000 {
+ compatible = "atmel,hlcdc";
+ reg = <0xf0030000 0x4000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>;
+ clock-names = "lcdc_clk","bus_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "disabled";
+ };
+
pmc: pmc at fffffc00 {
periphck {
lcdc_clk: lcdc_clk {
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 2/3] atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel
Cc: airlied, Jean-Jacques Hiblot, robdclark, plagnioj, linux-kernel
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 85d3027..2a2bced 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -51,6 +51,17 @@
};
};
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,hlcdc";
+ reg = <0xf0030000 0x4000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>;
+ clock-names = "lcdc_clk","bus_clk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "disabled";
+ };
+
pmc: pmc@fffffc00 {
periphck {
lcdc_clk: lcdc_clk {
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
2014-04-18 9:45 ` Jean-Jacques Hiblot
(?)
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel, Jean-Jacques Hiblot
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
index 59576c6..df01037 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -11,12 +11,17 @@
#include "sama5d3xmb.dtsi"
#include "sama5d3xdm.dtsi"
+
/ {
model = "Atmel SAMA5D36-EK";
compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
+ hlcdc: hlcdc@f0030000 {
+ status = "okay";
+ };
+
spi0: spi@f0004000 {
status = "okay";
};
@@ -46,7 +51,27 @@
};
};
};
-
+ panel {
+ compatible = "atmel,hlcdc,panel";
+ invert-hsync;
+ invert-vsync;
+ status = "okay";
+ display-timings {
+ 800x480p60 {
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <168>;
+ hback-porch = <88>;
+ hsync-len = <64>;
+ vback-porch = <8>;
+ vfront-porch = <37>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
sound {
status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
index 59576c6..df01037 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -11,12 +11,17 @@
#include "sama5d3xmb.dtsi"
#include "sama5d3xdm.dtsi"
+
/ {
model = "Atmel SAMA5D36-EK";
compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
+ hlcdc: hlcdc at f0030000 {
+ status = "okay";
+ };
+
spi0: spi at f0004000 {
status = "okay";
};
@@ -46,7 +51,27 @@
};
};
};
-
+ panel {
+ compatible = "atmel,hlcdc,panel";
+ invert-hsync;
+ invert-vsync;
+ status = "okay";
+ display-timings {
+ 800x480p60 {
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <168>;
+ hback-porch = <88>;
+ hsync-len = <64>;
+ vback-porch = <8>;
+ vfront-porch = <37>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
sound {
status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
@ 2014-04-18 9:45 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-18 9:45 UTC (permalink / raw)
To: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel
Cc: airlied, Jean-Jacques Hiblot, robdclark, plagnioj, linux-kernel
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
---
arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
index 59576c6..df01037 100644
--- a/arch/arm/boot/dts/sama5d36ek.dts
+++ b/arch/arm/boot/dts/sama5d36ek.dts
@@ -11,12 +11,17 @@
#include "sama5d3xmb.dtsi"
#include "sama5d3xdm.dtsi"
+
/ {
model = "Atmel SAMA5D36-EK";
compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
+ hlcdc: hlcdc@f0030000 {
+ status = "okay";
+ };
+
spi0: spi@f0004000 {
status = "okay";
};
@@ -46,7 +51,27 @@
};
};
};
-
+ panel {
+ compatible = "atmel,hlcdc,panel";
+ invert-hsync;
+ invert-vsync;
+ status = "okay";
+ display-timings {
+ 800x480p60 {
+ clock-frequency = <33260000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <168>;
+ hback-porch = <88>;
+ hsync-len = <64>;
+ vback-porch = <8>;
+ vfront-porch = <37>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
sound {
status = "okay";
};
--
1.9.1
^ permalink raw reply related [flat|nested] 41+ messages in thread
* Re: [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
2014-04-18 9:45 ` Jean-Jacques Hiblot
@ 2014-04-18 13:21 ` Boris BREZILLON
-1 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-18 13:21 UTC (permalink / raw)
To: Jean-Jacques Hiblot, nicolas.ferre, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel
Hi JJ,
On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
> +
> +static void update_scanout(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct drm_framebuffer *fb = crtc->fb;
> +
I guess you meant
struct drm_framebuffer *fb = hclcd_crtc->fb;
because otherwise you get an error when compiling (there are similar
issues below).
> + struct drm_gem_cma_object *gem;
> + struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
> + unsigned int depth, bpp;
> + dma_addr_t start;
> + dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
> +
> + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
> + gem = drm_fb_cma_get_gem_obj(fb, 0);
> +
> + start = gem->paddr + fb->offsets[0] +
> + (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
> +
> + if (hlcdc_crtc->fb != fb) {
> + struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
> + drm_framebuffer_reference(fb);
> + hlcdc_crtc->fb = fb;
> + if (oldfb) {
> + drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
> + drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
> + }
> + }
> +
> + if (desc->address != start) {
> + desc->address = start;
> + desc->next = desc_phys;
> + desc->control = LCDC_OVRCTRL_DFETCH;
> + }
> +
> + if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
> + hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
> + hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
> + }
> +}
> +
> +static void start(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void stop(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + /* Disable DISP signal */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + /* Disable synchronization */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + /* Disable pixel clock */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + /* Disable PWM */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
> +
> + drm_crtc_cleanup(crtc);
> + drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
> +
> + if (atmel_hlcdc_crtc->dma_descs[0])
> + dma_free_writecombine(dev->dev,
> + sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
> + atmel_hlcdc_crtc->dma_descs[0],
> + atmel_hlcdc_crtc->dma_descs_phys[0]);
> + kfree(atmel_hlcdc_crtc);
> +}
> +
> +static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t page_flip_flags)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + if (atmel_hlcdc_crtc->event) {
> + dev_err(dev->dev, "already pending page flip!\n");
> + return -EBUSY;
> + }
> +
> + crtc->fb = fb;
ditto
> + atmel_hlcdc_crtc->event = event;
> + update_scanout(crtc);
> + return 0;
> +}
> +
> +static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + /* we really only care about on or off: */
> + if (mode != DRM_MODE_DPMS_ON)
> + mode = DRM_MODE_DPMS_OFF;
> +
> + if (atmel_hlcdc_crtc->dpms == mode)
> + return;
> +
> + atmel_hlcdc_crtc->dpms = mode;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (mode == DRM_MODE_DPMS_ON) {
> + pm_runtime_forbid(dev->dev);
> + start(crtc);
> + } else {
> + stop(crtc);
> + pm_runtime_allow(dev->dev);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + return true;
> +}
> +
> +static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
> +}
> +
> +static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
> +{
> + u32 value = 0;
> +
> + switch (depth) {
> + case 1:
> + value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 2:
> + value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 4:
> + value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 8:
> + value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 12:
> + value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
> + break;
> + case 16:
> + value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
> + break;
> + case 18:
> + value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
> + break;
> + case 24:
> + value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
> + break;
> + case 32:
> + value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
> + break;
> + default:
> + dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
> + depth, bpp);
> + break;
> + }
> +
> + return value;
> +}
> +
> +
> +void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + unsigned long value;
> + unsigned long clk_value_khz;
> +
> + if (clock == 0)
> + clock = crtc->mode.clock;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + clk_value_khz = clk_get_rate(priv->clk) / 1000;
> +
> + value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
> +
> + if (value < 1) {
> + dev_notice(dev->dev, "using system clock as pixel clock\n");
> + value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + } else {
> + dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
> + clk_value_khz / value);
> + value = value - 2;
> + dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
> + value);
> + value = LCDC_LCDCFG0_CLKPWMSEL |
> + (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
> + | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode,
> + int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + int dpms = atmel_hlcdc_crtc->dpms;
> + int hbp, hfp, hsw, vbp, vfp, vsw;
> + unsigned int depth, bpp;
> + unsigned long value;
> + int ret;
> +
> + ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
> + if (WARN_ON(ret))
> + return ret;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (dpms == DRM_MODE_DPMS_ON)
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +
> + dev_dbg(dev->dev, "%s:\n", __func__);
> +
> +
> + /* Set pixel clock */
> + atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
> +
> + /* Initialize control register 5 */
> + value = priv->default_lcdcfg5;
> + value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
> + | LCDC_LCDCFG5_DISPDLY
> + | LCDC_LCDCFG5_VSPDLYS;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
> + value |= LCDC_LCDCFG5_HSPOL;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
> + value |= LCDC_LCDCFG5_VSPOL;
> +
> + dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
> +
> +
> + /* Configure timings: */
> + hbp = MAX(mode->htotal - mode->hsync_end, 1);
> + hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
> + hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
> + vbp = MAX(mode->vtotal - mode->vsync_end, 0);
> + vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
> + vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
> +
> + DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
> + mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
> +
> + /* Vertical & Horizontal Timing */
> + value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
> + value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
> +
> + value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
> + value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
> +
> + value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
> + value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
> +
> + /* Display size */
> + value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
> + value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
> +
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
> + LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
> +
> + drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
ditto
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
> + atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
> +
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-18 13:21 ` Boris BREZILLON
0 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-18 13:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi JJ,
On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
> +
> +static void update_scanout(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct drm_framebuffer *fb = crtc->fb;
> +
I guess you meant
struct drm_framebuffer *fb = hclcd_crtc->fb;
because otherwise you get an error when compiling (there are similar
issues below).
> + struct drm_gem_cma_object *gem;
> + struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
> + unsigned int depth, bpp;
> + dma_addr_t start;
> + dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
> +
> + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
> + gem = drm_fb_cma_get_gem_obj(fb, 0);
> +
> + start = gem->paddr + fb->offsets[0] +
> + (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
> +
> + if (hlcdc_crtc->fb != fb) {
> + struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
> + drm_framebuffer_reference(fb);
> + hlcdc_crtc->fb = fb;
> + if (oldfb) {
> + drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
> + drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
> + }
> + }
> +
> + if (desc->address != start) {
> + desc->address = start;
> + desc->next = desc_phys;
> + desc->control = LCDC_OVRCTRL_DFETCH;
> + }
> +
> + if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
> + hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
> + hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
> + }
> +}
> +
> +static void start(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void stop(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + /* Disable DISP signal */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + /* Disable synchronization */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + /* Disable pixel clock */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + /* Disable PWM */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
> +
> + drm_crtc_cleanup(crtc);
> + drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
> +
> + if (atmel_hlcdc_crtc->dma_descs[0])
> + dma_free_writecombine(dev->dev,
> + sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
> + atmel_hlcdc_crtc->dma_descs[0],
> + atmel_hlcdc_crtc->dma_descs_phys[0]);
> + kfree(atmel_hlcdc_crtc);
> +}
> +
> +static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t page_flip_flags)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + if (atmel_hlcdc_crtc->event) {
> + dev_err(dev->dev, "already pending page flip!\n");
> + return -EBUSY;
> + }
> +
> + crtc->fb = fb;
ditto
> + atmel_hlcdc_crtc->event = event;
> + update_scanout(crtc);
> + return 0;
> +}
> +
> +static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + /* we really only care about on or off: */
> + if (mode != DRM_MODE_DPMS_ON)
> + mode = DRM_MODE_DPMS_OFF;
> +
> + if (atmel_hlcdc_crtc->dpms == mode)
> + return;
> +
> + atmel_hlcdc_crtc->dpms = mode;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (mode == DRM_MODE_DPMS_ON) {
> + pm_runtime_forbid(dev->dev);
> + start(crtc);
> + } else {
> + stop(crtc);
> + pm_runtime_allow(dev->dev);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + return true;
> +}
> +
> +static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
> +}
> +
> +static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
> +{
> + u32 value = 0;
> +
> + switch (depth) {
> + case 1:
> + value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 2:
> + value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 4:
> + value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 8:
> + value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 12:
> + value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
> + break;
> + case 16:
> + value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
> + break;
> + case 18:
> + value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
> + break;
> + case 24:
> + value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
> + break;
> + case 32:
> + value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
> + break;
> + default:
> + dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
> + depth, bpp);
> + break;
> + }
> +
> + return value;
> +}
> +
> +
> +void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + unsigned long value;
> + unsigned long clk_value_khz;
> +
> + if (clock == 0)
> + clock = crtc->mode.clock;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + clk_value_khz = clk_get_rate(priv->clk) / 1000;
> +
> + value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
> +
> + if (value < 1) {
> + dev_notice(dev->dev, "using system clock as pixel clock\n");
> + value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + } else {
> + dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
> + clk_value_khz / value);
> + value = value - 2;
> + dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
> + value);
> + value = LCDC_LCDCFG0_CLKPWMSEL |
> + (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
> + | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode,
> + int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + int dpms = atmel_hlcdc_crtc->dpms;
> + int hbp, hfp, hsw, vbp, vfp, vsw;
> + unsigned int depth, bpp;
> + unsigned long value;
> + int ret;
> +
> + ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
> + if (WARN_ON(ret))
> + return ret;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (dpms == DRM_MODE_DPMS_ON)
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +
> + dev_dbg(dev->dev, "%s:\n", __func__);
> +
> +
> + /* Set pixel clock */
> + atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
> +
> + /* Initialize control register 5 */
> + value = priv->default_lcdcfg5;
> + value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
> + | LCDC_LCDCFG5_DISPDLY
> + | LCDC_LCDCFG5_VSPDLYS;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
> + value |= LCDC_LCDCFG5_HSPOL;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
> + value |= LCDC_LCDCFG5_VSPOL;
> +
> + dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
> +
> +
> + /* Configure timings: */
> + hbp = MAX(mode->htotal - mode->hsync_end, 1);
> + hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
> + hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
> + vbp = MAX(mode->vtotal - mode->vsync_end, 0);
> + vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
> + vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
> +
> + DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
> + mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
> +
> + /* Vertical & Horizontal Timing */
> + value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
> + value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
> +
> + value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
> + value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
> +
> + value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
> + value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
> +
> + /* Display size */
> + value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
> + value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
> +
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
> + LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
> +
> + drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
ditto
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
> + atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
> +
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 0/3] DRM driver for the ATMEL High end LCD controller
2014-04-18 9:45 ` Jean-Jacques Hiblot
@ 2014-04-18 13:37 ` Boris BREZILLON
-1 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-18 13:37 UTC (permalink / raw)
To: Jean-Jacques Hiblot, nicolas.ferre, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel
Hi JJ,
On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
> Hi,
>
> this patch serie implements a simple DRM driver for the ATMEL High end LCD
> controller found in the SAMA5 familly. It's based on the tilcdc driver.
> It uses the cma_helper for memory and fbdev stuff.
> Your comments are welcome !
Thanks for you work.
As I already told you, I started to work on a DRM/KMS driver for the
hlcdc too, and I'd be pleased to help you on this driver (either by
adding the missing stuff, debugging or reworking some parts).
Regarding the code itself, I only had a quick look, but I'll try to
review it next week. Anyway, I might not be the best person to give
advice on a DRM/KMS driver :-).
BTW, I tried to boot a kernel with your driver (statically compiled),
and it hangs (see http://pastebin.com/H24KpVHb). But I didn't have time
for further debugging.
Best Regards,
Boris
>
>
> Supported features:
> * the base layer (the main framebuffer)
> * a simple panel
> * a backlight driver
> * structure to 'easily' add other connectors (it comes from the tilcdc)
>
> On the todo list:
> * support overlays as drm_planes
> * support for the hardware cursor
> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>
>
> Jean-Jacques Hiblot (3):
> atmel: drm: added drm driver for the atmel hlcd controller
> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>
> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> 15 files changed, 3042 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>
> --
> 1.9.1
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-18 13:37 ` Boris BREZILLON
0 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-18 13:37 UTC (permalink / raw)
To: linux-arm-kernel
Hi JJ,
On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
> Hi,
>
> this patch serie implements a simple DRM driver for the ATMEL High end LCD
> controller found in the SAMA5 familly. It's based on the tilcdc driver.
> It uses the cma_helper for memory and fbdev stuff.
> Your comments are welcome !
Thanks for you work.
As I already told you, I started to work on a DRM/KMS driver for the
hlcdc too, and I'd be pleased to help you on this driver (either by
adding the missing stuff, debugging or reworking some parts).
Regarding the code itself, I only had a quick look, but I'll try to
review it next week. Anyway, I might not be the best person to give
advice on a DRM/KMS driver :-).
BTW, I tried to boot a kernel with your driver (statically compiled),
and it hangs (see http://pastebin.com/H24KpVHb). But I didn't have time
for further debugging.
Best Regards,
Boris
>
>
> Supported features:
> * the base layer (the main framebuffer)
> * a simple panel
> * a backlight driver
> * structure to 'easily' add other connectors (it comes from the tilcdc)
>
> On the todo list:
> * support overlays as drm_planes
> * support for the hardware cursor
> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>
>
> Jean-Jacques Hiblot (3):
> atmel: drm: added drm driver for the atmel hlcd controller
> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>
> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> 15 files changed, 3042 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>
> --
> 1.9.1
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
2014-04-18 13:21 ` Boris BREZILLON
(?)
@ 2014-04-18 14:31 ` Robert Nelson
-1 siblings, 0 replies; 41+ messages in thread
From: Robert Nelson @ 2014-04-18 14:31 UTC (permalink / raw)
To: Boris BREZILLON
Cc: Jean-Jacques Hiblot, Nicolas Ferre, linux-arm-kernel, dri-devel,
airlied, robdclark, Jean-Christophe PLAGNIOL-VILLARD,
linux kernel
On Fri, Apr 18, 2014 at 8:21 AM, Boris BREZILLON
<boris.brezillon@free-electrons.com> wrote:
> Hi JJ,
>
> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>> +
>> +static void update_scanout(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct drm_framebuffer *fb = crtc->fb;
>> +
>
> I guess you meant
>
> struct drm_framebuffer *fb = hclcd_crtc->fb;
>
>
> because otherwise you get an error when compiling (there are similar
> issues below).
This fixes this with v3.15-rc1
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
index 649fa19..a111d69 100644
--- a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
@@ -81,7 +81,7 @@ static void update_scanout(struct drm_crtc *crtc)
struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct atmel_hlcdc_drm_private *priv = dev->dev_private;
- struct drm_framebuffer *fb = crtc->fb;
+ struct drm_framebuffer *fb = crtc->primary->fb;
struct drm_gem_cma_object *gem;
struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
@@ -188,7 +188,7 @@ static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
return -EBUSY;
}
- crtc->fb = fb;
+ crtc->primary->fb = fb;
atmel_hlcdc_crtc->event = event;
update_scanout(crtc);
return 0;
@@ -397,7 +397,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
- drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
+ drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
Tested-by: Robert Nelson <robertcnelson@gmail.com>
digs out my 31/33/34, should have a patch for them in a bit...
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
^ permalink raw reply related [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-18 14:31 ` Robert Nelson
0 siblings, 0 replies; 41+ messages in thread
From: Robert Nelson @ 2014-04-18 14:31 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 18, 2014 at 8:21 AM, Boris BREZILLON
<boris.brezillon@free-electrons.com> wrote:
> Hi JJ,
>
> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>> +
>> +static void update_scanout(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct drm_framebuffer *fb = crtc->fb;
>> +
>
> I guess you meant
>
> struct drm_framebuffer *fb = hclcd_crtc->fb;
>
>
> because otherwise you get an error when compiling (there are similar
> issues below).
This fixes this with v3.15-rc1
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
index 649fa19..a111d69 100644
--- a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
@@ -81,7 +81,7 @@ static void update_scanout(struct drm_crtc *crtc)
struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct atmel_hlcdc_drm_private *priv = dev->dev_private;
- struct drm_framebuffer *fb = crtc->fb;
+ struct drm_framebuffer *fb = crtc->primary->fb;
struct drm_gem_cma_object *gem;
struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
@@ -188,7 +188,7 @@ static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
return -EBUSY;
}
- crtc->fb = fb;
+ crtc->primary->fb = fb;
atmel_hlcdc_crtc->event = event;
update_scanout(crtc);
return 0;
@@ -397,7 +397,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
- drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
+ drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
Tested-by: Robert Nelson <robertcnelson@gmail.com>
digs out my 31/33/34, should have a patch for them in a bit...
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
^ permalink raw reply related [flat|nested] 41+ messages in thread
* Re: [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-18 14:31 ` Robert Nelson
0 siblings, 0 replies; 41+ messages in thread
From: Robert Nelson @ 2014-04-18 14:31 UTC (permalink / raw)
To: Boris BREZILLON
Cc: Jean-Jacques Hiblot, Nicolas Ferre, linux kernel, dri-devel,
Jean-Christophe PLAGNIOL-VILLARD, linux-arm-kernel
On Fri, Apr 18, 2014 at 8:21 AM, Boris BREZILLON
<boris.brezillon@free-electrons.com> wrote:
> Hi JJ,
>
> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>> +
>> +static void update_scanout(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct drm_framebuffer *fb = crtc->fb;
>> +
>
> I guess you meant
>
> struct drm_framebuffer *fb = hclcd_crtc->fb;
>
>
> because otherwise you get an error when compiling (there are similar
> issues below).
This fixes this with v3.15-rc1
diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
index 649fa19..a111d69 100644
--- a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
@@ -81,7 +81,7 @@ static void update_scanout(struct drm_crtc *crtc)
struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct atmel_hlcdc_drm_private *priv = dev->dev_private;
- struct drm_framebuffer *fb = crtc->fb;
+ struct drm_framebuffer *fb = crtc->primary->fb;
struct drm_gem_cma_object *gem;
struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
@@ -188,7 +188,7 @@ static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
return -EBUSY;
}
- crtc->fb = fb;
+ crtc->primary->fb = fb;
atmel_hlcdc_crtc->event = event;
update_scanout(crtc);
return 0;
@@ -397,7 +397,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
- drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
+ drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
Tested-by: Robert Nelson <robertcnelson@gmail.com>
digs out my 31/33/34, should have a patch for them in a bit...
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
^ permalink raw reply related [flat|nested] 41+ messages in thread
* Re: [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
2014-04-18 9:45 ` Jean-Jacques Hiblot
(?)
@ 2014-04-18 14:48 ` Robert Nelson
-1 siblings, 0 replies; 41+ messages in thread
From: Robert Nelson @ 2014-04-18 14:48 UTC (permalink / raw)
To: Jean-Jacques Hiblot
Cc: Nicolas Ferre, Boris BREZILLON, linux-arm-kernel, dri-devel,
airlied, robdclark, Jean-Christophe PLAGNIOL-VILLARD,
linux kernel
On Fri, Apr 18, 2014 at 4:45 AM, Jean-Jacques Hiblot
<jjhiblot@traphandler.com> wrote:
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
> arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
> index 59576c6..df01037 100644
> --- a/arch/arm/boot/dts/sama5d36ek.dts
> +++ b/arch/arm/boot/dts/sama5d36ek.dts
> @@ -11,12 +11,17 @@
> #include "sama5d3xmb.dtsi"
> #include "sama5d3xdm.dtsi"
>
> +
extra space
> / {
> model = "Atmel SAMA5D36-EK";
> compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
>
> ahb {
> apb {
> + hlcdc: hlcdc@f0030000 {
> + status = "okay";
> + };
> +
> spi0: spi@f0004000 {
> status = "okay";
> };
> @@ -46,7 +51,27 @@
> };
> };
> };
> -
> + panel {
> + compatible = "atmel,hlcdc,panel";
> + invert-hsync;
> + invert-vsync;
> + status = "okay";
> + display-timings {
> + 800x480p60 {
> + clock-frequency = <33260000>;
> + hactive = <800>;
> + vactive = <480>;
> + hfront-porch = <168>;
> + hback-porch = <88>;
> + hsync-len = <64>;
> + vback-porch = <8>;
> + vfront-porch = <37>;
> + vsync-len = <2>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + };
> + };
> + };
> sound {
> status = "okay";
> };
> --
> 1.9.1
Feel free to merge in this patch:
https://github.com/RobertCNelson/armv7_devel/blob/v3.15.x-sama5-armv7/patches/drm/0005-atmel-dt-Add-supports-for-the-lcdc-support-on-the-sa.patch
With this commit..
All tested with sama5d31/33/34/36ek board's..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
@ 2014-04-18 14:48 ` Robert Nelson
0 siblings, 0 replies; 41+ messages in thread
From: Robert Nelson @ 2014-04-18 14:48 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 18, 2014 at 4:45 AM, Jean-Jacques Hiblot
<jjhiblot@traphandler.com> wrote:
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
> arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
> index 59576c6..df01037 100644
> --- a/arch/arm/boot/dts/sama5d36ek.dts
> +++ b/arch/arm/boot/dts/sama5d36ek.dts
> @@ -11,12 +11,17 @@
> #include "sama5d3xmb.dtsi"
> #include "sama5d3xdm.dtsi"
>
> +
extra space
> / {
> model = "Atmel SAMA5D36-EK";
> compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
>
> ahb {
> apb {
> + hlcdc: hlcdc at f0030000 {
> + status = "okay";
> + };
> +
> spi0: spi at f0004000 {
> status = "okay";
> };
> @@ -46,7 +51,27 @@
> };
> };
> };
> -
> + panel {
> + compatible = "atmel,hlcdc,panel";
> + invert-hsync;
> + invert-vsync;
> + status = "okay";
> + display-timings {
> + 800x480p60 {
> + clock-frequency = <33260000>;
> + hactive = <800>;
> + vactive = <480>;
> + hfront-porch = <168>;
> + hback-porch = <88>;
> + hsync-len = <64>;
> + vback-porch = <8>;
> + vfront-porch = <37>;
> + vsync-len = <2>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + };
> + };
> + };
> sound {
> status = "okay";
> };
> --
> 1.9.1
Feel free to merge in this patch:
https://github.com/RobertCNelson/armv7_devel/blob/v3.15.x-sama5-armv7/patches/drm/0005-atmel-dt-Add-supports-for-the-lcdc-support-on-the-sa.patch
With this commit..
All tested with sama5d31/33/34/36ek board's..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
@ 2014-04-18 14:48 ` Robert Nelson
0 siblings, 0 replies; 41+ messages in thread
From: Robert Nelson @ 2014-04-18 14:48 UTC (permalink / raw)
To: Jean-Jacques Hiblot
Cc: Boris BREZILLON, Nicolas Ferre, linux kernel, dri-devel,
Jean-Christophe PLAGNIOL-VILLARD, linux-arm-kernel
On Fri, Apr 18, 2014 at 4:45 AM, Jean-Jacques Hiblot
<jjhiblot@traphandler.com> wrote:
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
> arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
> index 59576c6..df01037 100644
> --- a/arch/arm/boot/dts/sama5d36ek.dts
> +++ b/arch/arm/boot/dts/sama5d36ek.dts
> @@ -11,12 +11,17 @@
> #include "sama5d3xmb.dtsi"
> #include "sama5d3xdm.dtsi"
>
> +
extra space
> / {
> model = "Atmel SAMA5D36-EK";
> compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
>
> ahb {
> apb {
> + hlcdc: hlcdc@f0030000 {
> + status = "okay";
> + };
> +
> spi0: spi@f0004000 {
> status = "okay";
> };
> @@ -46,7 +51,27 @@
> };
> };
> };
> -
> + panel {
> + compatible = "atmel,hlcdc,panel";
> + invert-hsync;
> + invert-vsync;
> + status = "okay";
> + display-timings {
> + 800x480p60 {
> + clock-frequency = <33260000>;
> + hactive = <800>;
> + vactive = <480>;
> + hfront-porch = <168>;
> + hback-porch = <88>;
> + hsync-len = <64>;
> + vback-porch = <8>;
> + vfront-porch = <37>;
> + vsync-len = <2>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + };
> + };
> + };
> sound {
> status = "okay";
> };
> --
> 1.9.1
Feel free to merge in this patch:
https://github.com/RobertCNelson/armv7_devel/blob/v3.15.x-sama5-armv7/patches/drm/0005-atmel-dt-Add-supports-for-the-lcdc-support-on-the-sa.patch
With this commit..
All tested with sama5d31/33/34/36ek board's..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
2014-04-18 14:31 ` Robert Nelson
(?)
@ 2014-04-19 19:03 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-19 19:03 UTC (permalink / raw)
To: Robert Nelson
Cc: Boris BREZILLON, Jean-Jacques Hiblot, Nicolas Ferre,
linux-arm-kernel, dri-devel, airlied, Rob Clark,
Jean-Christophe PLAGNIOL-VILLARD, linux kernel
Thanks for the patch Robert.
I've just noticed that I actually worked with an old version of the
kernel (v3.14-rc3) when I thought it based on 3.15.
JJ
2014-04-18 16:31 GMT+02:00 Robert Nelson <robertcnelson@gmail.com>:
>
> On Fri, Apr 18, 2014 at 8:21 AM, Boris BREZILLON
> <boris.brezillon@free-electrons.com> wrote:
>> Hi JJ,
>>
>> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>>> +
>>> +static void update_scanout(struct drm_crtc *crtc)
>>> +{
>>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>>> + struct drm_device *dev = crtc->dev;
>>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>>> + struct drm_framebuffer *fb = crtc->fb;
>>> +
>>
>> I guess you meant
>>
>> struct drm_framebuffer *fb = hclcd_crtc->fb;
>>
>>
>> because otherwise you get an error when compiling (there are similar
>> issues below).
>
> This fixes this with v3.15-rc1
>
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> index 649fa19..a111d69 100644
> --- a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> @@ -81,7 +81,7 @@ static void update_scanout(struct drm_crtc *crtc)
> struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> struct drm_device *dev = crtc->dev;
> struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> - struct drm_framebuffer *fb = crtc->fb;
> + struct drm_framebuffer *fb = crtc->primary->fb;
>
> struct drm_gem_cma_object *gem;
> struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
> @@ -188,7 +188,7 @@ static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
> return -EBUSY;
> }
>
> - crtc->fb = fb;
> + crtc->primary->fb = fb;
> atmel_hlcdc_crtc->event = event;
> update_scanout(crtc);
> return 0;
> @@ -397,7 +397,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
> hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
> LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
>
> - drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
> + drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
> hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
> atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
> hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
>
> Tested-by: Robert Nelson <robertcnelson@gmail.com>
>
> digs out my 31/33/34, should have a patch for them in a bit...
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-19 19:03 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-19 19:03 UTC (permalink / raw)
To: linux-arm-kernel
Thanks for the patch Robert.
I've just noticed that I actually worked with an old version of the
kernel (v3.14-rc3) when I thought it based on 3.15.
JJ
2014-04-18 16:31 GMT+02:00 Robert Nelson <robertcnelson@gmail.com>:
>
> On Fri, Apr 18, 2014 at 8:21 AM, Boris BREZILLON
> <boris.brezillon@free-electrons.com> wrote:
>> Hi JJ,
>>
>> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>>> +
>>> +static void update_scanout(struct drm_crtc *crtc)
>>> +{
>>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>>> + struct drm_device *dev = crtc->dev;
>>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>>> + struct drm_framebuffer *fb = crtc->fb;
>>> +
>>
>> I guess you meant
>>
>> struct drm_framebuffer *fb = hclcd_crtc->fb;
>>
>>
>> because otherwise you get an error when compiling (there are similar
>> issues below).
>
> This fixes this with v3.15-rc1
>
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> index 649fa19..a111d69 100644
> --- a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> @@ -81,7 +81,7 @@ static void update_scanout(struct drm_crtc *crtc)
> struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> struct drm_device *dev = crtc->dev;
> struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> - struct drm_framebuffer *fb = crtc->fb;
> + struct drm_framebuffer *fb = crtc->primary->fb;
>
> struct drm_gem_cma_object *gem;
> struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
> @@ -188,7 +188,7 @@ static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
> return -EBUSY;
> }
>
> - crtc->fb = fb;
> + crtc->primary->fb = fb;
> atmel_hlcdc_crtc->event = event;
> update_scanout(crtc);
> return 0;
> @@ -397,7 +397,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
> hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
> LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
>
> - drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
> + drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
> hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
> atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
> hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
>
> Tested-by: Robert Nelson <robertcnelson@gmail.com>
>
> digs out my 31/33/34, should have a patch for them in a bit...
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-19 19:03 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-19 19:03 UTC (permalink / raw)
To: Robert Nelson
Cc: Boris BREZILLON, Jean-Jacques Hiblot, airlied, Nicolas Ferre,
linux kernel, dri-devel, Rob Clark,
Jean-Christophe PLAGNIOL-VILLARD, linux-arm-kernel
Thanks for the patch Robert.
I've just noticed that I actually worked with an old version of the
kernel (v3.14-rc3) when I thought it based on 3.15.
JJ
2014-04-18 16:31 GMT+02:00 Robert Nelson <robertcnelson@gmail.com>:
>
> On Fri, Apr 18, 2014 at 8:21 AM, Boris BREZILLON
> <boris.brezillon@free-electrons.com> wrote:
>> Hi JJ,
>>
>> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>>> +
>>> +static void update_scanout(struct drm_crtc *crtc)
>>> +{
>>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>>> + struct drm_device *dev = crtc->dev;
>>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>>> + struct drm_framebuffer *fb = crtc->fb;
>>> +
>>
>> I guess you meant
>>
>> struct drm_framebuffer *fb = hclcd_crtc->fb;
>>
>>
>> because otherwise you get an error when compiling (there are similar
>> issues below).
>
> This fixes this with v3.15-rc1
>
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> index 649fa19..a111d69 100644
> --- a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> @@ -81,7 +81,7 @@ static void update_scanout(struct drm_crtc *crtc)
> struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> struct drm_device *dev = crtc->dev;
> struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> - struct drm_framebuffer *fb = crtc->fb;
> + struct drm_framebuffer *fb = crtc->primary->fb;
>
> struct drm_gem_cma_object *gem;
> struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
> @@ -188,7 +188,7 @@ static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
> return -EBUSY;
> }
>
> - crtc->fb = fb;
> + crtc->primary->fb = fb;
> atmel_hlcdc_crtc->event = event;
> update_scanout(crtc);
> return 0;
> @@ -397,7 +397,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
> hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
> LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
>
> - drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
> + drm_fb_get_bpp_depth(crtc->primary->fb->pixel_format, &depth, &bpp);
> hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
> atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
> hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
>
> Tested-by: Robert Nelson <robertcnelson@gmail.com>
>
> digs out my 31/33/34, should have a patch for them in a bit...
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
2014-04-18 14:48 ` Robert Nelson
(?)
@ 2014-04-19 19:07 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-19 19:07 UTC (permalink / raw)
To: Robert Nelson
Cc: Jean-Jacques Hiblot, Nicolas Ferre, Boris BREZILLON,
linux-arm-kernel, dri-devel, airlied, Rob Clark,
Jean-Christophe PLAGNIOL-VILLARD, linux kernel
2014-04-18 16:48 GMT+02:00 Robert Nelson <robertcnelson@gmail.com>:
>
> On Fri, Apr 18, 2014 at 4:45 AM, Jean-Jacques Hiblot
> <jjhiblot@traphandler.com> wrote:
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
>> ---
>> arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
>> 1 file changed, 26 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
>> index 59576c6..df01037 100644
>> --- a/arch/arm/boot/dts/sama5d36ek.dts
>> +++ b/arch/arm/boot/dts/sama5d36ek.dts
>> @@ -11,12 +11,17 @@
>> #include "sama5d3xmb.dtsi"
>> #include "sama5d3xdm.dtsi"
>>
>> +
>
> extra space
>
>> / {
>> model = "Atmel SAMA5D36-EK";
>> compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
>>
>> ahb {
>> apb {
>> + hlcdc: hlcdc@f0030000 {
>> + status = "okay";
>> + };
>> +
>> spi0: spi@f0004000 {
>> status = "okay";
>> };
>> @@ -46,7 +51,27 @@
>> };
>> };
>> };
>> -
>> + panel {
>> + compatible = "atmel,hlcdc,panel";
>> + invert-hsync;
>> + invert-vsync;
>> + status = "okay";
>> + display-timings {
>> + 800x480p60 {
>> + clock-frequency = <33260000>;
>> + hactive = <800>;
>> + vactive = <480>;
>> + hfront-porch = <168>;
>> + hback-porch = <88>;
>> + hsync-len = <64>;
>> + vback-porch = <8>;
>> + vfront-porch = <37>;
>> + vsync-len = <2>;
>> + hsync-active = <1>;
>> + vsync-active = <1>;
>> + };
>> + };
>> + };
>> sound {
>> status = "okay";
>> };
>> --
>> 1.9.1
>
> Feel free to merge in this patch:
>
> https://github.com/RobertCNelson/armv7_devel/blob/v3.15.x-sama5-armv7/patches/drm/0005-atmel-dt-Add-supports-for-the-lcdc-support-on-the-sa.patch
>
Thanks for the patch.
> With this commit..
>
> All tested with sama5d31/33/34/36ek board's..
and many thanks for the testing.
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
@ 2014-04-19 19:07 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-19 19:07 UTC (permalink / raw)
To: linux-arm-kernel
2014-04-18 16:48 GMT+02:00 Robert Nelson <robertcnelson@gmail.com>:
>
> On Fri, Apr 18, 2014 at 4:45 AM, Jean-Jacques Hiblot
> <jjhiblot@traphandler.com> wrote:
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
>> ---
>> arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
>> 1 file changed, 26 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
>> index 59576c6..df01037 100644
>> --- a/arch/arm/boot/dts/sama5d36ek.dts
>> +++ b/arch/arm/boot/dts/sama5d36ek.dts
>> @@ -11,12 +11,17 @@
>> #include "sama5d3xmb.dtsi"
>> #include "sama5d3xdm.dtsi"
>>
>> +
>
> extra space
>
>> / {
>> model = "Atmel SAMA5D36-EK";
>> compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
>>
>> ahb {
>> apb {
>> + hlcdc: hlcdc at f0030000 {
>> + status = "okay";
>> + };
>> +
>> spi0: spi at f0004000 {
>> status = "okay";
>> };
>> @@ -46,7 +51,27 @@
>> };
>> };
>> };
>> -
>> + panel {
>> + compatible = "atmel,hlcdc,panel";
>> + invert-hsync;
>> + invert-vsync;
>> + status = "okay";
>> + display-timings {
>> + 800x480p60 {
>> + clock-frequency = <33260000>;
>> + hactive = <800>;
>> + vactive = <480>;
>> + hfront-porch = <168>;
>> + hback-porch = <88>;
>> + hsync-len = <64>;
>> + vback-porch = <8>;
>> + vfront-porch = <37>;
>> + vsync-len = <2>;
>> + hsync-active = <1>;
>> + vsync-active = <1>;
>> + };
>> + };
>> + };
>> sound {
>> status = "okay";
>> };
>> --
>> 1.9.1
>
> Feel free to merge in this patch:
>
> https://github.com/RobertCNelson/armv7_devel/blob/v3.15.x-sama5-armv7/patches/drm/0005-atmel-dt-Add-supports-for-the-lcdc-support-on-the-sa.patch
>
Thanks for the patch.
> With this commit..
>
> All tested with sama5d31/33/34/36ek board's..
and many thanks for the testing.
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek
@ 2014-04-19 19:07 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-19 19:07 UTC (permalink / raw)
To: Robert Nelson
Cc: Boris BREZILLON, Jean-Jacques Hiblot, airlied, Nicolas Ferre,
linux kernel, dri-devel, Rob Clark,
Jean-Christophe PLAGNIOL-VILLARD, linux-arm-kernel
2014-04-18 16:48 GMT+02:00 Robert Nelson <robertcnelson@gmail.com>:
>
> On Fri, Apr 18, 2014 at 4:45 AM, Jean-Jacques Hiblot
> <jjhiblot@traphandler.com> wrote:
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
>> ---
>> arch/arm/boot/dts/sama5d36ek.dts | 27 ++++++++++++++++++++++++++-
>> 1 file changed, 26 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts
>> index 59576c6..df01037 100644
>> --- a/arch/arm/boot/dts/sama5d36ek.dts
>> +++ b/arch/arm/boot/dts/sama5d36ek.dts
>> @@ -11,12 +11,17 @@
>> #include "sama5d3xmb.dtsi"
>> #include "sama5d3xdm.dtsi"
>>
>> +
>
> extra space
>
>> / {
>> model = "Atmel SAMA5D36-EK";
>> compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
>>
>> ahb {
>> apb {
>> + hlcdc: hlcdc@f0030000 {
>> + status = "okay";
>> + };
>> +
>> spi0: spi@f0004000 {
>> status = "okay";
>> };
>> @@ -46,7 +51,27 @@
>> };
>> };
>> };
>> -
>> + panel {
>> + compatible = "atmel,hlcdc,panel";
>> + invert-hsync;
>> + invert-vsync;
>> + status = "okay";
>> + display-timings {
>> + 800x480p60 {
>> + clock-frequency = <33260000>;
>> + hactive = <800>;
>> + vactive = <480>;
>> + hfront-porch = <168>;
>> + hback-porch = <88>;
>> + hsync-len = <64>;
>> + vback-porch = <8>;
>> + vfront-porch = <37>;
>> + vsync-len = <2>;
>> + hsync-active = <1>;
>> + vsync-active = <1>;
>> + };
>> + };
>> + };
>> sound {
>> status = "okay";
>> };
>> --
>> 1.9.1
>
> Feel free to merge in this patch:
>
> https://github.com/RobertCNelson/armv7_devel/blob/v3.15.x-sama5-armv7/patches/drm/0005-atmel-dt-Add-supports-for-the-lcdc-support-on-the-sa.patch
>
Thanks for the patch.
> With this commit..
>
> All tested with sama5d31/33/34/36ek board's..
and many thanks for the testing.
>
> Regards,
>
> --
> Robert Nelson
> http://www.rcn-ee.com/
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 0/3] DRM driver for the ATMEL High end LCD controller
2014-04-18 9:45 ` Jean-Jacques Hiblot
@ 2014-04-23 15:36 ` Tim Niemeyer
-1 siblings, 0 replies; 41+ messages in thread
From: Tim Niemeyer @ 2014-04-23 15:36 UTC (permalink / raw)
To: Jean-Jacques Hiblot, Robert Nelson
Cc: nicolas.ferre, boris.brezillon, linux-arm-kernel, dri-devel,
airlied, robdclark, plagnioj, linux-kernel
Hi Jean-Jacques,
Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
> Hi,
>
> this patch serie implements a simple DRM driver for the ATMEL High end LCD
> controller found in the SAMA5 familly. It's based on the tilcdc driver.
> It uses the cma_helper for memory and fbdev stuff.
> Your comments are welcome !
I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
framebuffer device on the sama5d31-ek. Seems to work.
> Supported features:
> * the base layer (the main framebuffer)
Tested to show a little tux png, but it's appearing only after
'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
is there missing some initializing?
> * a simple panel
> * a backlight driver
Tested to set brightness to 0, 20 and 255. Works.
Thanks for your work.
Best Regards
Tim
> * structure to 'easily' add other connectors (it comes from the tilcdc)
>
> On the todo list:
> * support overlays as drm_planes
> * support for the hardware cursor
> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>
>
> Jean-Jacques Hiblot (3):
> atmel: drm: added drm driver for the atmel hlcd controller
> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>
> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> 15 files changed, 3042 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-23 15:36 ` Tim Niemeyer
0 siblings, 0 replies; 41+ messages in thread
From: Tim Niemeyer @ 2014-04-23 15:36 UTC (permalink / raw)
To: linux-arm-kernel
Hi Jean-Jacques,
Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
> Hi,
>
> this patch serie implements a simple DRM driver for the ATMEL High end LCD
> controller found in the SAMA5 familly. It's based on the tilcdc driver.
> It uses the cma_helper for memory and fbdev stuff.
> Your comments are welcome !
I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
framebuffer device on the sama5d31-ek. Seems to work.
> Supported features:
> * the base layer (the main framebuffer)
Tested to show a little tux png, but it's appearing only after
'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
is there missing some initializing?
> * a simple panel
> * a backlight driver
Tested to set brightness to 0, 20 and 255. Works.
Thanks for your work.
Best Regards
Tim
> * structure to 'easily' add other connectors (it comes from the tilcdc)
>
> On the todo list:
> * support overlays as drm_planes
> * support for the hardware cursor
> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>
>
> Jean-Jacques Hiblot (3):
> atmel: drm: added drm driver for the atmel hlcd controller
> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>
> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> 15 files changed, 3042 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 0/3] DRM driver for the ATMEL High end LCD controller
2014-04-23 15:36 ` Tim Niemeyer
@ 2014-04-24 12:14 ` Boris BREZILLON
-1 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-24 12:14 UTC (permalink / raw)
To: Tim Niemeyer, Jean-Jacques Hiblot, Robert Nelson
Cc: nicolas.ferre, linux-arm-kernel, dri-devel, airlied, robdclark,
plagnioj, linux-kernel
Hi Tim,
On 23/04/2014 17:36, Tim Niemeyer wrote:
> Hi Jean-Jacques,
>
> Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
>> Hi,
>>
>> this patch serie implements a simple DRM driver for the ATMEL High end LCD
>> controller found in the SAMA5 familly. It's based on the tilcdc driver.
>> It uses the cma_helper for memory and fbdev stuff.
>> Your comments are welcome !
> I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
> framebuffer device on the sama5d31-ek. Seems to work.
>
>> Supported features:
>> * the base layer (the main framebuffer)
> Tested to show a little tux png, but it's appearing only after
> 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
> is there missing some initializing?
Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
Best Regards,
Boris
>
>> * a simple panel
>> * a backlight driver
> Tested to set brightness to 0, 20 and 255. Works.
>
> Thanks for your work.
>
> Best Regards
> Tim
>
>> * structure to 'easily' add other connectors (it comes from the tilcdc)
>>
>> On the todo list:
>> * support overlays as drm_planes
>> * support for the hardware cursor
>> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>>
>>
>> Jean-Jacques Hiblot (3):
>> atmel: drm: added drm driver for the atmel hlcd controller
>> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
>> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>>
>> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
>> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
>> drivers/gpu/drm/Kconfig | 2 +
>> drivers/gpu/drm/Makefile | 1 +
>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>> 15 files changed, 3042 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-24 12:14 ` Boris BREZILLON
0 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-24 12:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tim,
On 23/04/2014 17:36, Tim Niemeyer wrote:
> Hi Jean-Jacques,
>
> Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
>> Hi,
>>
>> this patch serie implements a simple DRM driver for the ATMEL High end LCD
>> controller found in the SAMA5 familly. It's based on the tilcdc driver.
>> It uses the cma_helper for memory and fbdev stuff.
>> Your comments are welcome !
> I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
> framebuffer device on the sama5d31-ek. Seems to work.
>
>> Supported features:
>> * the base layer (the main framebuffer)
> Tested to show a little tux png, but it's appearing only after
> 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
> is there missing some initializing?
Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
Best Regards,
Boris
>
>> * a simple panel
>> * a backlight driver
> Tested to set brightness to 0, 20 and 255. Works.
>
> Thanks for your work.
>
> Best Regards
> Tim
>
>> * structure to 'easily' add other connectors (it comes from the tilcdc)
>>
>> On the todo list:
>> * support overlays as drm_planes
>> * support for the hardware cursor
>> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>>
>>
>> Jean-Jacques Hiblot (3):
>> atmel: drm: added drm driver for the atmel hlcd controller
>> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
>> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>>
>> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
>> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
>> drivers/gpu/drm/Kconfig | 2 +
>> drivers/gpu/drm/Makefile | 1 +
>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>> 15 files changed, 3042 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 0/3] DRM driver for the ATMEL High end LCD controller
2014-04-24 12:14 ` Boris BREZILLON
@ 2014-04-24 12:46 ` Tim Niemeyer
-1 siblings, 0 replies; 41+ messages in thread
From: Tim Niemeyer @ 2014-04-24 12:46 UTC (permalink / raw)
To: Boris BREZILLON
Cc: Jean-Jacques Hiblot, Robert Nelson, nicolas.ferre,
linux-arm-kernel, dri-devel, airlied, robdclark, plagnioj,
linux-kernel
Hi Boris
Am Donnerstag, den 24.04.2014, 14:14 +0200 schrieb Boris BREZILLON:
> Hi Tim,
>
> On 23/04/2014 17:36, Tim Niemeyer wrote:
> > Hi Jean-Jacques,
> >
> > Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
> >> Hi,
> >>
> >> this patch serie implements a simple DRM driver for the ATMEL High end LCD
> >> controller found in the SAMA5 familly. It's based on the tilcdc driver.
> >> It uses the cma_helper for memory and fbdev stuff.
> >> Your comments are welcome !
> > I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
> > framebuffer device on the sama5d31-ek. Seems to work.
> >
> >> Supported features:
> >> * the base layer (the main framebuffer)
> > Tested to show a little tux png, but it's appearing only after
> > 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
> > is there missing some initializing?
>
> Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
I can't see any difference with that.
I used fbv to display the tux. With CONFIG_FRAMEBUFFER_CONSOLE=n the
display stays with a small atmel logo and u-Boot version information. If
i set CONFIG_FRAMEBUFFER_CONSOLE=y, the display is black after kernel
start and fbv just works as expected.
Best Regards,
Tim
> Best Regards,
>
> Boris
>
> >
> >> * a simple panel
> >> * a backlight driver
> > Tested to set brightness to 0, 20 and 255. Works.
> >
> > Thanks for your work.
> >
> > Best Regards
> > Tim
> >
> >> * structure to 'easily' add other connectors (it comes from the tilcdc)
> >>
> >> On the todo list:
> >> * support overlays as drm_planes
> >> * support for the hardware cursor
> >> * support for the SiI9022 HDMI connector (present on sama5d36ek)
> >>
> >>
> >> Jean-Jacques Hiblot (3):
> >> atmel: drm: added drm driver for the atmel hlcd controller
> >> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
> >> atmel: dt: Add supports for the lcdc support on the sama5d36ek
> >>
> >> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
> >> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
> >> drivers/gpu/drm/Kconfig | 2 +
> >> drivers/gpu/drm/Makefile | 1 +
> >> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> >> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> >> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> >> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> >> 15 files changed, 3042 insertions(+), 1 deletion(-)
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
> >>
> >> --
> >> 1.9.1
> >>
> >>
> >> _______________________________________________
> >> linux-arm-kernel mailing list
> >> linux-arm-kernel@lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-24 12:46 ` Tim Niemeyer
0 siblings, 0 replies; 41+ messages in thread
From: Tim Niemeyer @ 2014-04-24 12:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi Boris
Am Donnerstag, den 24.04.2014, 14:14 +0200 schrieb Boris BREZILLON:
> Hi Tim,
>
> On 23/04/2014 17:36, Tim Niemeyer wrote:
> > Hi Jean-Jacques,
> >
> > Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
> >> Hi,
> >>
> >> this patch serie implements a simple DRM driver for the ATMEL High end LCD
> >> controller found in the SAMA5 familly. It's based on the tilcdc driver.
> >> It uses the cma_helper for memory and fbdev stuff.
> >> Your comments are welcome !
> > I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
> > framebuffer device on the sama5d31-ek. Seems to work.
> >
> >> Supported features:
> >> * the base layer (the main framebuffer)
> > Tested to show a little tux png, but it's appearing only after
> > 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
> > is there missing some initializing?
>
> Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
I can't see any difference with that.
I used fbv to display the tux. With CONFIG_FRAMEBUFFER_CONSOLE=n the
display stays with a small atmel logo and u-Boot version information. If
i set CONFIG_FRAMEBUFFER_CONSOLE=y, the display is black after kernel
start and fbv just works as expected.
Best Regards,
Tim
> Best Regards,
>
> Boris
>
> >
> >> * a simple panel
> >> * a backlight driver
> > Tested to set brightness to 0, 20 and 255. Works.
> >
> > Thanks for your work.
> >
> > Best Regards
> > Tim
> >
> >> * structure to 'easily' add other connectors (it comes from the tilcdc)
> >>
> >> On the todo list:
> >> * support overlays as drm_planes
> >> * support for the hardware cursor
> >> * support for the SiI9022 HDMI connector (present on sama5d36ek)
> >>
> >>
> >> Jean-Jacques Hiblot (3):
> >> atmel: drm: added drm driver for the atmel hlcd controller
> >> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
> >> atmel: dt: Add supports for the lcdc support on the sama5d36ek
> >>
> >> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
> >> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
> >> drivers/gpu/drm/Kconfig | 2 +
> >> drivers/gpu/drm/Makefile | 1 +
> >> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> >> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> >> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> >> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> >> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> >> 15 files changed, 3042 insertions(+), 1 deletion(-)
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> >> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
> >>
> >> --
> >> 1.9.1
> >>
> >>
> >> _______________________________________________
> >> linux-arm-kernel mailing list
> >> linux-arm-kernel at lists.infradead.org
> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 0/3] DRM driver for the ATMEL High end LCD controller
2014-04-24 12:46 ` Tim Niemeyer
@ 2014-04-24 16:59 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-24 16:59 UTC (permalink / raw)
To: Tim Niemeyer, Boris BREZILLON
Cc: Robert Nelson, nicolas.ferre, linux-arm-kernel, dri-devel,
airlied, robdclark, plagnioj, linux-kernel
Hi Tim,
I'll look a this issue soon. It looks like the scanout is not started in
your test case.
Thanks for reporting this.
JJ
On 04/24/2014 02:46 PM, Tim Niemeyer wrote:
>
> Hi Boris
>
> Am Donnerstag, den 24.04.2014, 14:14 +0200 schrieb Boris BREZILLON:
>> Hi Tim,
>>
>> On 23/04/2014 17:36, Tim Niemeyer wrote:
>>> Hi Jean-Jacques,
>>>
>>> Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
>>>> Hi,
>>>>
>>>> this patch serie implements a simple DRM driver for the ATMEL High end LCD
>>>> controller found in the SAMA5 familly. It's based on the tilcdc driver.
>>>> It uses the cma_helper for memory and fbdev stuff.
>>>> Your comments are welcome !
>>> I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
>>> framebuffer device on the sama5d31-ek. Seems to work.
>>>
>>>> Supported features:
>>>> * the base layer (the main framebuffer)
>>> Tested to show a little tux png, but it's appearing only after
>>> 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
>>> is there missing some initializing?
>>
>> Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
> I can't see any difference with that.
>
> I used fbv to display the tux. With CONFIG_FRAMEBUFFER_CONSOLE=n the
> display stays with a small atmel logo and u-Boot version information. If
> i set CONFIG_FRAMEBUFFER_CONSOLE=y, the display is black after kernel
> start and fbv just works as expected.
>
> Best Regards,
> Tim
>
>> Best Regards,
>>
>> Boris
>>
>>>
>>>> * a simple panel
>>>> * a backlight driver
>>> Tested to set brightness to 0, 20 and 255. Works.
>>>
>>> Thanks for your work.
>>>
>>> Best Regards
>>> Tim
>>>
>>>> * structure to 'easily' add other connectors (it comes from the tilcdc)
>>>>
>>>> On the todo list:
>>>> * support overlays as drm_planes
>>>> * support for the hardware cursor
>>>> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>>>>
>>>>
>>>> Jean-Jacques Hiblot (3):
>>>> atmel: drm: added drm driver for the atmel hlcd controller
>>>> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
>>>> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>>>>
>>>> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
>>>> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
>>>> drivers/gpu/drm/Kconfig | 2 +
>>>> drivers/gpu/drm/Makefile | 1 +
>>>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>>>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>>>> 15 files changed, 3042 insertions(+), 1 deletion(-)
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>>>
>>>> --
>>>> 1.9.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel@lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>
>
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-24 16:59 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-24 16:59 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tim,
I'll look a this issue soon. It looks like the scanout is not started in
your test case.
Thanks for reporting this.
JJ
On 04/24/2014 02:46 PM, Tim Niemeyer wrote:
>
> Hi Boris
>
> Am Donnerstag, den 24.04.2014, 14:14 +0200 schrieb Boris BREZILLON:
>> Hi Tim,
>>
>> On 23/04/2014 17:36, Tim Niemeyer wrote:
>>> Hi Jean-Jacques,
>>>
>>> Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
>>>> Hi,
>>>>
>>>> this patch serie implements a simple DRM driver for the ATMEL High end LCD
>>>> controller found in the SAMA5 familly. It's based on the tilcdc driver.
>>>> It uses the cma_helper for memory and fbdev stuff.
>>>> Your comments are welcome !
>>> I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
>>> framebuffer device on the sama5d31-ek. Seems to work.
>>>
>>>> Supported features:
>>>> * the base layer (the main framebuffer)
>>> Tested to show a little tux png, but it's appearing only after
>>> 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
>>> is there missing some initializing?
>>
>> Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
> I can't see any difference with that.
>
> I used fbv to display the tux. With CONFIG_FRAMEBUFFER_CONSOLE=n the
> display stays with a small atmel logo and u-Boot version information. If
> i set CONFIG_FRAMEBUFFER_CONSOLE=y, the display is black after kernel
> start and fbv just works as expected.
>
> Best Regards,
> Tim
>
>> Best Regards,
>>
>> Boris
>>
>>>
>>>> * a simple panel
>>>> * a backlight driver
>>> Tested to set brightness to 0, 20 and 255. Works.
>>>
>>> Thanks for your work.
>>>
>>> Best Regards
>>> Tim
>>>
>>>> * structure to 'easily' add other connectors (it comes from the tilcdc)
>>>>
>>>> On the todo list:
>>>> * support overlays as drm_planes
>>>> * support for the hardware cursor
>>>> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>>>>
>>>>
>>>> Jean-Jacques Hiblot (3):
>>>> atmel: drm: added drm driver for the atmel hlcd controller
>>>> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
>>>> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>>>>
>>>> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
>>>> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
>>>> drivers/gpu/drm/Kconfig | 2 +
>>>> drivers/gpu/drm/Makefile | 1 +
>>>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>>>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>>>> 15 files changed, 3042 insertions(+), 1 deletion(-)
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>>>
>>>> --
>>>> 1.9.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>
>
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
2014-04-18 9:45 ` Jean-Jacques Hiblot
@ 2014-04-28 19:22 ` Boris BREZILLON
-1 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-28 19:22 UTC (permalink / raw)
To: Jean-Jacques Hiblot, nicolas.ferre, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel
Hi,
This is a first review, from someone who's clearly not a DRM/KMS expert
but who already thought about this specific driver :-).
I strongly recommend that you wait for DRM/KMS maintainers and/or
experienced developers reviews before modifying anything ;-).
On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> 13 files changed, 3005 insertions(+)
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 8e7fa4d..13fec638 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -190,6 +190,8 @@ source "drivers/gpu/drm/omapdrm/Kconfig"
>
> source "drivers/gpu/drm/tilcdc/Kconfig"
>
> +source "drivers/gpu/drm/atmel_hlcdc/Kconfig"
> +
> source "drivers/gpu/drm/qxl/Kconfig"
>
> source "drivers/gpu/drm/bochs/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 292a79d..8245aa5 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
> obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
> obj-$(CONFIG_DRM_OMAP) += omapdrm/
> obj-$(CONFIG_DRM_TILCDC) += tilcdc/
> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc/
> obj-$(CONFIG_DRM_QXL) += qxl/
> obj-$(CONFIG_DRM_BOCHS) += bochs/
> obj-$(CONFIG_DRM_MSM) += msm/
> diff --git a/drivers/gpu/drm/atmel_hlcdc/Kconfig b/drivers/gpu/drm/atmel_hlcdc/Kconfig
> new file mode 100644
> index 0000000..6ee5989
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/Kconfig
> @@ -0,0 +1,13 @@
> +config DRM_ATMEL_HLCDC
> + tristate "DRM Support for ATMEL HLCDC Display Controller"
> + depends on DRM && OF && ARM
> + select DRM_KMS_HELPER
> + select DRM_KMS_FB_HELPER
> + select DRM_KMS_CMA_HELPER
> + select DRM_GEM_CMA_HELPER
> + select VIDEOMODE_HELPERS
> + select BACKLIGHT_CLASS_DEVICE
> + select BACKLIGHT_LCD_SUPPORT
> + help
> + Choose this option if you have an ATMEL SoC with HLCDC display
> + controller, for example SAMA5D36EK.
> diff --git a/drivers/gpu/drm/atmel_hlcdc/Makefile b/drivers/gpu/drm/atmel_hlcdc/Makefile
> new file mode 100644
> index 0000000..4935c36
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/Makefile
> @@ -0,0 +1,12 @@
> +ccflags-y := -Iinclude/drm
> +ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
> + ccflags-y += -Werror
> +endif
> +
> +atmel_hlcdc-y := \
> + atmel_hlcdc_crtc.o \
> + atmel_hlcdc_panel.o \
> + atmel_hlcdc_backlight.o \
> + atmel_hlcdc_drv.o
> +
> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc.o
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> new file mode 100644
> index 0000000..8ed0767
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> @@ -0,0 +1,771 @@
> +/*
> + * Header file for AT91 High end LCD Controller
> + *
> + * Data structure and register user interface
> + *
> + * Copyright (C) 2010 Atmel Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + */
> +#ifndef __ATMEL_HLCD_H__
> +#define __ATMEL_HLCD_H__
> +
> +/* Lcdc hardware registers */
> +#define ATMEL_LCDC_LCDCFG0 0x0000
> +#define LCDC_LCDCFG0_CLKPOL (0x1 << 0)
> +#define LCDC_LCDCFG0_CLKSEL (0x1 << 2)
> +#define LCDC_LCDCFG0_CLKPWMSEL (0x1 << 3)
> +#define LCDC_LCDCFG0_CGDISBASE (0x1 << 8)
> +#define LCDC_LCDCFG0_CGDISOVR1 (0x1 << 9)
> +#define LCDC_LCDCFG0_CGDISOVR2 (0x1 << 10)
> +#define LCDC_LCDCFG0_CGDISHEO (0x1 << 11)
> +#define LCDC_LCDCFG0_CGDISHCR (0x1 << 12)
> +#define LCDC_LCDCFG0_CGDISPP (0x1 << 13)
> +#define LCDC_LCDCFG0_CLKDIV_OFFSET 16
> +#define LCDC_LCDCFG0_CLKDIV (0xff << LCDC_LCDCFG0_CLKDIV_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG1 0x0004
> +#define LCDC_LCDCFG1_HSPW_OFFSET 0
> +#define LCDC_LCDCFG1_HSPW (0x3f << LCDC_LCDCFG1_HSPW_OFFSET)
> +#define LCDC_LCDCFG1_VSPW_OFFSET 16
> +#define LCDC_LCDCFG1_VSPW (0x3f << LCDC_LCDCFG1_VSPW_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG2 0x0008
> +#define LCDC_LCDCFG2_VFPW_OFFSET 0
> +#define LCDC_LCDCFG2_VFPW (0x3f << LCDC_LCDCFG2_VFPW_OFFSET)
> +#define LCDC_LCDCFG2_VBPW_OFFSET 16
> +#define LCDC_LCDCFG2_VBPW (0x3f << LCDC_LCDCFG2_VBPW_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG3 0x000C
> +#define LCDC_LCDCFG3_HFPW_OFFSET 0
> +#define LCDC_LCDCFG3_HFPW (0xff << LCDC_LCDCFG3_HFPW_OFFSET)
> +#define LCDC2_LCDCFG3_HFPW (0x1ff << LCDC_LCDCFG3_HFPW_OFFSET)
> +#define LCDC_LCDCFG3_HBPW_OFFSET 16
> +#define LCDC_LCDCFG3_HBPW (0xff << LCDC_LCDCFG3_HBPW_OFFSET)
> +#define LCDC2_LCDCFG3_HBPW (0x1ff << LCDC_LCDCFG3_HBPW_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG4 0x0010
> +#define LCDC_LCDCFG4_PPL_OFFSET 0
> +#define LCDC_LCDCFG4_PPL (0x7ff << LCDC_LCDCFG4_PPL_OFFSET)
> +#define LCDC_LCDCFG4_RPF_OFFSET 16
> +#define LCDC_LCDCFG4_RPF (0x7ff << LCDC_LCDCFG4_RPF_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG5 0x0014
> +#define LCDC_LCDCFG5_HSPOL (0x1 << 0)
> +#define LCDC_LCDCFG5_VSPOL (0x1 << 1)
> +#define LCDC_LCDCFG5_VSPDLYS (0x1 << 2)
> +#define LCDC_LCDCFG5_VSPDLYE (0x1 << 3)
> +#define LCDC_LCDCFG5_DISPPOL (0x1 << 4)
> +#define LCDC_LCDCFG5_SERIAL (0x1 << 5)
> +#define LCDC_LCDCFG5_DITHER (0x1 << 6)
> +#define LCDC_LCDCFG5_DISPDLY (0x1 << 7)
> +#define LCDC_LCDCFG5_MODE_OFFSET 8
> +#define LCDC_LCDCFG5_MODE (0x3 << LCDC_LCDCFG5_MODE_OFFSET)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_12BPP (0x0 << 8)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_16BPP (0x1 << 8)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_18BPP (0x2 << 8)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_24BPP (0x3 << 8)
> +#define LCDC_LCDCFG5_PP (0x1 << 10)
> +#define LCDC_LCDCFG5_VSPSU (0x1 << 12)
> +#define LCDC_LCDCFG5_VSPHO (0x1 << 13)
> +#define LCDC_LCDCFG5_GUARDTIME_OFFSET 16
> +#define LCDC_LCDCFG5_GUARDTIME (0x1f << LCDC_LCDCFG5_GUARDTIME_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG6 0x0018
> +#define LCDC_LCDCFG6_PWMPS_OFFSET 0
> +#define LCDC_LCDCFG6_PWMPS (0x7 << LCDC_LCDCFG6_PWMPS_OFFSET)
> +#define LCDC_LCDCFG6_PWMPOL (0x1 << 4)
> +#define LCDC_LCDCFG6_PWMCVAL_OFFSET 8
> +#define LCDC_LCDCFG6_PWMCVAL (0xff << LCDC_LCDCFG6_PWMCVAL_OFFSET)
> +
> +#define ATMEL_LCDC_LCDEN 0x0020
> +#define LCDC_LCDEN_CLKEN (0x1 << 0)
> +#define LCDC_LCDEN_SYNCEN (0x1 << 1)
> +#define LCDC_LCDEN_DISPEN (0x1 << 2)
> +#define LCDC_LCDEN_PWMEN (0x1 << 3)
> +
> +#define ATMEL_LCDC_LCDDIS 0x0024
> +#define LCDC_LCDDIS_CLKDIS (0x1 << 0)
> +#define LCDC_LCDDIS_SYNCDIS (0x1 << 1)
> +#define LCDC_LCDDIS_DISPDIS (0x1 << 2)
> +#define LCDC_LCDDIS_PWMDIS (0x1 << 3)
> +#define LCDC_LCDDIS_CLKRST (0x1 << 8)
> +#define LCDC_LCDDIS_SYNCRST (0x1 << 9)
> +#define LCDC_LCDDIS_DISPRST (0x1 << 10)
> +#define LCDC_LCDDIS_PWMRST (0x1 << 11)
> +
> +#define ATMEL_LCDC_LCDSR 0x0028
> +#define LCDC_LCDSR_CLKSTS (0x1 << 0)
> +#define LCDC_LCDSR_LCDSTS (0x1 << 1)
> +#define LCDC_LCDSR_DISPSTS (0x1 << 2)
> +#define LCDC_LCDSR_PWMSTS (0x1 << 3)
> +#define LCDC_LCDSR_SIPSTS (0x1 << 4)
> +
> +#define ATMEL_LCDC_LCDIER 0x002C
> +#define LCDC_LCDIER_SOFIE (0x1 << 0)
> +#define LCDC_LCDIER_DISIE (0x1 << 1)
> +#define LCDC_LCDIER_DISPIE (0x1 << 2)
> +#define LCDC_LCDIER_FIFOERRIE (0x1 << 4)
> +#define LCDC_LCDIER_BASEIE (0x1 << 8)
> +#define LCDC_LCDIER_OVR1IE (0x1 << 9)
> +#define LCDC_LCDIER_OVR2IE (0x1 << 10)
> +#define LCDC_LCDIER_HEOIE (0x1 << 11)
> +#define LCDC_LCDIER_HCRIE (0x1 << 12)
> +#define LCDC_LCDIER_PPIE (0x1 << 13)
> +
> +#define ATMEL_LCDC_LCDIDR 0x0030
> +#define LCDC_LCDIDR_SOFID (0x1 << 0)
> +#define LCDC_LCDIDR_DISID (0x1 << 1)
> +#define LCDC_LCDIDR_DISPID (0x1 << 2)
> +#define LCDC_LCDIDR_FIFOERRID (0x1 << 4)
> +#define LCDC_LCDIDR_BASEID (0x1 << 8)
> +#define LCDC_LCDIDR_OVR1ID (0x1 << 9)
> +#define LCDC_LCDIDR_OVR2ID (0x1 << 10)
> +#define LCDC_LCDIDR_HEOID (0x1 << 11)
> +#define LCDC_LCDIDR_HCRID (0x1 << 12)
> +#define LCDC_LCDIDR_PPID (0x1 << 13)
> +
> +#define ATMEL_LCDC_LCDIMR 0x0034
> +#define LCDC_LCDIMR_SOFIM (0x1 << 0)
> +#define LCDC_LCDIMR_DISIM (0x1 << 1)
> +#define LCDC_LCDIMR_DISPIM (0x1 << 2)
> +#define LCDC_LCDIMR_FIFOERRIM (0x1 << 4)
> +#define LCDC_LCDIMR_BASEIM (0x1 << 8)
> +#define LCDC_LCDIMR_OVR1IM (0x1 << 9)
> +#define LCDC_LCDIMR_OVR2IM (0x1 << 10)
> +#define LCDC_LCDIMR_HEOIM (0x1 << 11)
> +#define LCDC_LCDIMR_HCRIM (0x1 << 12)
> +#define LCDC_LCDIMR_PPIM (0x1 << 13)
> +
> +#define ATMEL_LCDC_LCDISR 0x0038
> +#define LCDC_LCDISR_SOF (0x1 << 0)
> +#define LCDC_LCDISR_DIS (0x1 << 1)
> +#define LCDC_LCDISR_DISP (0x1 << 2)
> +#define LCDC_LCDISR_FIFOERR (0x1 << 4)
> +#define LCDC_LCDISR_BASE (0x1 << 8)
> +#define LCDC_LCDISR_OVR1 (0x1 << 9)
> +#define LCDC_LCDISR_OVR2 (0x1 << 10)
> +#define LCDC_LCDISR_HEO (0x1 << 11)
> +#define LCDC_LCDISR_HCR (0x1 << 12)
> +#define LCDC_LCDISR_PP (0x1 << 13)
> +
> +#define ATMEL_LCDC_BASECHER 0x0040
> +#define LCDC_BASECHER_CHEN (0x1 << 0)
> +#define LCDC_BASECHER_UPDATEEN (0x1 << 1)
> +#define LCDC_BASECHER_A2QEN (0x1 << 2)
> +
> +#define ATMEL_LCDC_BASECHDR 0x0044
> +#define LCDC_BASECHDR_CHDIS (0x1 << 0)
> +#define LCDC_BASECHDR_CHRST (0x1 << 8)
> +
> +#define ATMEL_LCDC_BASECHSR 0x0048
> +#define LCDC_BASECHSR_CHSR (0x1 << 0)
> +#define LCDC_BASECHSR_UPDATESR (0x1 << 1)
> +#define LCDC_BASECHSR_A2QSR (0x1 << 2)
> +
> +#define ATMEL_LCDC_BASEIER 0x004C
> +#define LCDC_BASEIER_DMA (0x1 << 2)
> +#define LCDC_BASEIER_DSCR (0x1 << 3)
> +#define LCDC_BASEIER_ADD (0x1 << 4)
> +#define LCDC_BASEIER_DONE (0x1 << 5)
> +#define LCDC_BASEIER_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEIDR 0x0050
> +#define LCDC_BASEIDR_DMA (0x1 << 2)
> +#define LCDC_BASEIDR_DSCR (0x1 << 3)
> +#define LCDC_BASEIDR_ADD (0x1 << 4)
> +#define LCDC_BASEIDR_DONE (0x1 << 5)
> +#define LCDC_BASEIDR_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEIMR 0x0054
> +#define LCDC_BASEIMR_DMA (0x1 << 2)
> +#define LCDC_BASEIMR_DSCR (0x1 << 3)
> +#define LCDC_BASEIMR_ADD (0x1 << 4)
> +#define LCDC_BASEIMR_DONE (0x1 << 5)
> +#define LCDC_BASEIMR_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEISR 0x0058
> +#define LCDC_BASEISR_DMA (0x1 << 2)
> +#define LCDC_BASEISR_DSCR (0x1 << 3)
> +#define LCDC_BASEISR_ADD (0x1 << 4)
> +#define LCDC_BASEISR_DONE (0x1 << 5)
> +#define LCDC_BASEISR_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEHEAD 0x005C
> +
> +#define ATMEL_LCDC_BASEADDR 0x0060
> +
> +#define ATMEL_LCDC_BASECTRL 0x0064
> +#define LCDC_BASECTRL_DFETCH (0x1 << 0)
> +#define LCDC_BASECTRL_LFETCH (0x1 << 1)
> +#define LCDC_BASECTRL_DMAIEN (0x1 << 2)
> +#define LCDC_BASECTRL_DSCRIEN (0x1 << 3)
> +#define LCDC_BASECTRL_ADDIEN (0x1 << 4)
> +#define LCDC_BASECTRL_DONEIEN (0x1 << 5)
> +
> +#define ATMEL_LCDC_BASENEXT 0x0068
> +
> +#define ATMEL_LCDC_BASECFG0 0x006C
> +#define LCDC_BASECFG0_SIF (0x1 << 0)
> +#define LCDC_BASECFG0_BLEN_OFFSET 4
> +#define LCDC_BASECFG0_BLEN (0x3 << LCDC_BASECFG0_BLEN_OFFSET)
> +#define LCDC_BASECFG0_BLEN_AHB_SINGLE (0x0 << 4)
> +#define LCDC_BASECFG0_BLEN_AHB_INCR4 (0x1 << 4)
> +#define LCDC_BASECFG0_BLEN_AHB_INCR8 (0x2 << 4)
> +#define LCDC_BASECFG0_BLEN_AHB_INCR16 (0x3 << 4)
> +#define LCDC_BASECFG0_DLBO (0x1 << 8)
> +
> +#define ATMEL_LCDC_BASECFG1 0x0070
> +#define LCDC_BASECFG1_CLUTEN (0x1 << 0)
> +#define LCDC_BASECFG1_RGBMODE_OFFSET 4
> +#define LCDC_BASECFG1_RGBMODE (0xf << LCDC_BASECFG1_RGBMODE_OFFSET)
> +#define LCDC_BASECFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
> +#define LCDC_BASECFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
> +#define LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
> +#define LCDC_BASECFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
> +#define LCDC_BASECFG1_CLUTMODE_OFFSET 8
> +#define LCDC_BASECFG1_CLUTMODE (0x3 << LCDC_BASECFG1_CLUTMODE_OFFSET)
> +#define LCDC_BASECFG1_CLUTMODE_1BPP (0x0 << 8)
> +#define LCDC_BASECFG1_CLUTMODE_2BPP (0x1 << 8)
> +#define LCDC_BASECFG1_CLUTMODE_4BPP (0x2 << 8)
> +#define LCDC_BASECFG1_CLUTMODE_8BPP (0x3 << 8)
> +
> +#define ATMEL_LCDC_BASECFG2 0x0074
> +
> +#define ATMEL_LCDC_BASECFG3 0x0078
> +#define LCDC_BASECFG3_BDEF_OFFSET 0
> +#define LCDC_BASECFG3_BDEF (0xff << LCDC_BASECFG3_BDEF_OFFSET)
> +#define LCDC_BASECFG3_GDEF_OFFSET 8
> +#define LCDC_BASECFG3_GDEF (0xff << LCDC_BASECFG3_GDEF_OFFSET)
> +#define LCDC_BASECFG3_RDEF_OFFSET 16
> +#define LCDC_BASECFG3_RDEF (0xff << LCDC_BASECFG3_RDEF_OFFSET)
> +
> +#define ATMEL_LCDC_BASECFG4 0x007C
> +#define LCDC_BASECFG4_DMA (0x1 << 8)
> +#define LCDC_BASECFG4_REP (0x1 << 9)
> +#define LCDC_BASECFG4_DISCEN (0x1 << 11)
> +
> +#define ATMEL_LCDC_BASECFG5 0x0080
> +#define LCDC_BASECFG5_DISCXPOS_OFFSET 0
> +#define LCDC_BASECFG5_DISCXPOS (0x7ff << LCDC_BASECFG5_DISCXPOS_OFFSET)
> +#define LCDC_BASECFG5_DISCYPOS_OFFSET 16
> +#define LCDC_BASECFG5_DISCYPOS (0x7ff << LCDC_BASECFG5_DISCYPOS_OFFSET)
> +
> +#define ATMEL_LCDC_BASECFG6 0x0084
> +#define LCDC_BASECFG6_DISCXSIZE_OFFSET 0
> +#define LCDC_BASECFG6_DISCXSIZE (0x7ff << LCDC_BASECFG6_DISCXSIZE_OFFSET)
> +#define LCDC_BASECFG6_DISCYSIZE_OFFSET 16
> +#define LCDC_BASECFG6_DISCYSIZE (0x7ff << LCDC_BASECFG6_DISCYSIZE_OFFSET)
> +
All layers use pretty much the same layout (IER,IDR, IMR, HEAD, ADDR, ...).
Maybe you could define something like this:
ATMEL_LCDC_CHER(layer) (layer->reg_offset + (0x0))
ATMEL_LCDC_CHDR(layer) (layer->reg_offset + (0x4))
...
with each layer storing its own reg_offset.
IMHO, this would reduce the MACRO list size and thus make this file more
readable.
> +#define ATMEL_LCDC_HEOCHER 0x0280
> +#define ATMEL_LCDC2_HEOCHER 0x0340
> +#define LCDC_HEOCHER_CHEN (0x1 << 0)
> +#define LCDC_HEOCHER_UPDATEEN (0x1 << 1)
> +#define LCDC_HEOCHER_A2QEN (0x1 << 2)
[...]
> +#define ATMEL_LCDC_HCRCLUT 0x1400
> +#define ATMEL_LCDC2_HCRCLUT 0x1600
> +#define LCDC_HCRCLUT_BCLUT_OFFSET 0
> +#define LCDC_HCRCLUT_BCLUT (0xff << LCDC_HCRCLUT_BCLUT_OFFSET)
> +#define LCDC_HCRCLUT_GCLUT_OFFSET 8
> +#define LCDC_HCRCLUT_GCLUT (0xff << LCDC_HCRCLUT_GCLUT_OFFSET)
> +#define LCDC_HCRCLUT_RCLUT_OFFSET 16
> +#define LCDC_HCRCLUT_RCLUT (0xff << LCDC_HCRCLUT_RCLUT_OFFSET)
> +#define LCDC_HCRCLUT_ACLUT_OFFSET 24
> +#define LCDC_HCRCLUT_ACLUT (0xff << LCDC_HCRCLUT_ACLUT_OFFSET)
> +
> +/* Base layer CLUT */
> +#define ATMEL_HLCDC_LUT 0x0400
> +
> +
> +static inline void hlcdc_write(struct drm_device *dev, u32 reg, u32 data)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + iowrite32(data, priv->mmio + reg);
> +}
> +
> +static inline u32 hlcdc_read(struct drm_device *dev, u32 reg)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + return ioread32(priv->mmio + reg);
> +}
> +
> +#endif /* __ATMEL_HLCDC4_H__ */
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> new file mode 100644
> index 0000000..143ba72
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> @@ -0,0 +1,92 @@
> +/*
> + * atmel_hlcdc_backlight.c -- Backlight driver for the atmel HLCDC controller
> + *
> + * Copyright (C) 2014 Traphandler
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/backlight.h>
> +
> +#include "atmel_hlcdc_drv.h"
> +#include "atmel_hlcdc.h"
> +
> +#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
> +
> +
> +static int get_brightness(struct backlight_device *backlight)
> +{
> + struct drm_device *dev = bl_get_data(backlight);
> +
> + return (hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & LCDC_LCDCFG6_PWMCVAL)
> + >> LCDC_LCDCFG6_PWMCVAL_OFFSET;
> +}
> +
> +static int update_status(struct backlight_device *backlight)
> +{
> + struct drm_device *dev = bl_get_data(backlight);
> + int brightness = backlight->props.brightness;
> + u32 reg;
> +
> + if (backlight->props.power != FB_BLANK_UNBLANK ||
> + backlight->props.state & BL_CORE_SUSPENDED)
> + brightness = 0;
> +
> + reg = hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & ~LCDC_LCDCFG6_PWMCVAL;
> + reg |= brightness << LCDC_LCDCFG6_PWMCVAL_OFFSET;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, reg);
> + DBG("new brightness is : %d\n", get_brightness(backlight));
> + return 0;
> +}
> +
> +
> +
> +static const struct backlight_ops atmel_drm_backlight_ops = {
> + .options = BL_CORE_SUSPENDRESUME,
> + .update_status = update_status,
> + .get_brightness = get_brightness,
> +};
> +
> +int atmel_drm_backlight_init(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct backlight_device *backlight;
> +
> + backlight = backlight_device_register("backlight", dev->dev, dev,
> + &atmel_drm_backlight_ops , NULL);
> + if (IS_ERR(backlight)) {
> + dev_err(dev->dev, "unable to register backlight device: %ld\n",
> + PTR_ERR(backlight));
> + return PTR_ERR(backlight);
> + }
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
> + (ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
> +
> + backlight->props.max_brightness = 0xFF;
> + backlight->props.brightness = get_brightness(backlight);
> + backlight->props.power = FB_BLANK_UNBLANK;
> + backlight_update_status(backlight);
> +
> + priv->backlight = backlight;
> +
> + return 0;
> +}
> +
> +void atmel_drm_backlight_exit(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> +
> + backlight_device_unregister(priv->backlight);
> +}
Atmel's datasheet describe it as a PWM (that will most likely be used as
a backlight, but still :-)).
How about implementing a pwm chip and then use the backlight-pwm driver
to expose a backlight device based on this PWM device ?
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> new file mode 100644
> index 0000000..6a99101
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> @@ -0,0 +1,25 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ATMEL_HLCDC_BACKLIGHT_H__
> +#define __ATMEL_HLCDC_BACKLIGHT_H__
> +
> +int atmel_drm_backlight_init(struct drm_device *dev);
> +void atmel_drm_backlight_exit(struct drm_device *dev);
> +
> +#endif
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> new file mode 100644
> index 0000000..649fa19
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> @@ -0,0 +1,702 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
> + *
> + * Base on the tilcdc driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "drm_flip_work.h"
> +
> +#include "atmel_hlcdc_drv.h"
> +#include "atmel_hlcdc.h"
> +#include "atmel_hlcdc_ovl.h"
> +
> +#define MAX(x, y) ((x) > (y) ? (x) : (y))
> +
> +
> +struct atmel_hlcd_dma_desc {
> + u32 address;
I think you should use dma_addr_t instead of u32.
> + u32 control;
> + u32 next;
ditto
> + u32 dummy; /* for 64-bit alignment */
> +};
> +
> +enum {
> + DMA_BASE = 0,
> + DMA_OVR_1,
> + DMA_OVR_2,
> + DMA_HEO,
> + DMA_HCR,
> + DMA_PP,
> + DMA_MAX
> +};
> +
> +struct atmel_hlcdc_crtc {
> + struct drm_crtc base;
> + uint32_t dirty;
> + dma_addr_t start, end;
> + struct drm_pending_vblank_event *event;
> + int dpms;
> +
> + struct atmel_hlcd_dma_desc *dma_descs[DMA_MAX];
> + dma_addr_t dma_descs_phys[DMA_MAX];
> +
> + /* fb currently set to scanout 0/1: */
> + struct drm_framebuffer *fb;
> +
> + /* for deferred fb unref's: */
> + struct drm_flip_work unref_work;
> +#ifdef USE_LUT
> + u8 lut_r[256], lut_g[256], lut_b[256];
> +#endif
> +};
> +#define to_atmel_hlcdc_crtc(x) container_of(x, struct atmel_hlcdc_crtc, base)
> +
> +static void unref_worker(struct drm_flip_work *work, void *val)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc =
> + container_of(work, struct atmel_hlcdc_crtc, unref_work);
> + struct drm_device *dev = atmel_hlcdc_crtc->base.dev;
> +
> + mutex_lock(&dev->mode_config.mutex);
> + drm_framebuffer_unreference(val);
> + mutex_unlock(&dev->mode_config.mutex);
> +}
> +
> +static void update_scanout(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct drm_framebuffer *fb = crtc->fb;
> +
> + struct drm_gem_cma_object *gem;
> + struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
> + unsigned int depth, bpp;
> + dma_addr_t start;
> + dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
> +
> + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
> + gem = drm_fb_cma_get_gem_obj(fb, 0);
> +
> + start = gem->paddr + fb->offsets[0] +
> + (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
> +
> + if (hlcdc_crtc->fb != fb) {
> + struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
> + drm_framebuffer_reference(fb);
> + hlcdc_crtc->fb = fb;
> + if (oldfb) {
> + drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
> + drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
> + }
> + }
> +
> + if (desc->address != start) {
> + desc->address = start;
> + desc->next = desc_phys;
> + desc->control = LCDC_OVRCTRL_DFETCH;
> + }
> +
> + if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
> + hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
I read the datasheet several times, and wonder how this could work.
Here's what I understood:
If you want to initiate a DMA transfer and the layer channel is not
enabled yet, you have to write ATMEL_LCDC_BASEADDR, ATMEL_LCDC_BASENEXT
and ATMEL_LCDC_BASECTRL registers, and then write the CHEN bit in the
CHER register.
If the layer channel is already enabled and a DMA transfer is in
progress, you'd better use the HEAD pointer and write the A2QEN bit.
Here, you're only writing the NEXT pointer, and AFAICT this can only
work if the layer has already been enabled (by the bootloader for example).
> + hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
> + }
> +}
> +
> +static void start(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void stop(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + /* Disable DISP signal */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + /* Disable synchronization */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + /* Disable pixel clock */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + /* Disable PWM */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
> +
> + drm_crtc_cleanup(crtc);
> + drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
> +
> + if (atmel_hlcdc_crtc->dma_descs[0])
> + dma_free_writecombine(dev->dev,
> + sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
> + atmel_hlcdc_crtc->dma_descs[0],
> + atmel_hlcdc_crtc->dma_descs_phys[0]);
> + kfree(atmel_hlcdc_crtc);
> +}
> +
> +static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t page_flip_flags)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + if (atmel_hlcdc_crtc->event) {
> + dev_err(dev->dev, "already pending page flip!\n");
> + return -EBUSY;
> + }
> +
> + crtc->fb = fb;
> + atmel_hlcdc_crtc->event = event;
> + update_scanout(crtc);
> + return 0;
> +}
> +
> +static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + /* we really only care about on or off: */
> + if (mode != DRM_MODE_DPMS_ON)
> + mode = DRM_MODE_DPMS_OFF;
> +
> + if (atmel_hlcdc_crtc->dpms == mode)
> + return;
> +
> + atmel_hlcdc_crtc->dpms = mode;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (mode == DRM_MODE_DPMS_ON) {
> + pm_runtime_forbid(dev->dev);
> + start(crtc);
> + } else {
> + stop(crtc);
> + pm_runtime_allow(dev->dev);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + return true;
> +}
> +
> +static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
> +}
> +
> +static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
> +{
> + u32 value = 0;
> +
> + switch (depth) {
> + case 1:
> + value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 2:
> + value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 4:
> + value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 8:
> + value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 12:
> + value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
> + break;
> + case 16:
> + value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
> + break;
> + case 18:
> + value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
> + break;
> + case 24:
> + value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
> + break;
> + case 32:
> + value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
> + break;
> + default:
> + dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
> + depth, bpp);
> + break;
> + }
> +
> + return value;
> +}
> +
> +
> +void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + unsigned long value;
> + unsigned long clk_value_khz;
> +
> + if (clock == 0)
> + clock = crtc->mode.clock;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + clk_value_khz = clk_get_rate(priv->clk) / 1000;
> +
> + value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
> +
> + if (value < 1) {
> + dev_notice(dev->dev, "using system clock as pixel clock\n");
> + value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + } else {
> + dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
> + clk_value_khz / value);
> + value = value - 2;
> + dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
> + value);
> + value = LCDC_LCDCFG0_CLKPWMSEL |
> + (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
> + | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode,
> + int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + int dpms = atmel_hlcdc_crtc->dpms;
> + int hbp, hfp, hsw, vbp, vfp, vsw;
> + unsigned int depth, bpp;
> + unsigned long value;
> + int ret;
> +
> + ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
> + if (WARN_ON(ret))
> + return ret;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (dpms == DRM_MODE_DPMS_ON)
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +
> + dev_dbg(dev->dev, "%s:\n", __func__);
> +
> +
> + /* Set pixel clock */
> + atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
> +
> + /* Initialize control register 5 */
> + value = priv->default_lcdcfg5;
> + value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
> + | LCDC_LCDCFG5_DISPDLY
> + | LCDC_LCDCFG5_VSPDLYS;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
> + value |= LCDC_LCDCFG5_HSPOL;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
> + value |= LCDC_LCDCFG5_VSPOL;
> +
> + dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
> +
> +
> + /* Configure timings: */
> + hbp = MAX(mode->htotal - mode->hsync_end, 1);
> + hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
> + hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
> + vbp = MAX(mode->vtotal - mode->vsync_end, 0);
> + vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
> + vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
> +
> + DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
> + mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
> +
> + /* Vertical & Horizontal Timing */
> + value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
> + value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
> +
> + value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
> + value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
> +
> + value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
> + value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
> +
> + /* Display size */
> + value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
> + value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
> +
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
> + LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
> +
> + drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
> + atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
> +
> + /* Disable all interrupts */
> + hlcdc_write(dev, ATMEL_LCDC_LCDIDR, ~0UL);
> + hlcdc_write(dev, ATMEL_LCDC_BASEIDR, ~0UL);
> + /* Enable BASE LAYER overflow interrupts */
> + hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
> + /* Enable FIFO error interrupt and the global BASE LAYER interrupt*/
> + hlcdc_write(dev, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
> + LCDC_LCDIER_BASEIE);
> +
> +
> + update_scanout(crtc);
> +
> + atmel_hlcdc_crtc_dpms(crtc, dpms);
> +
> + pm_runtime_put_sync(dev->dev);
> + return 0;
> +}
> +
> +static int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + update_scanout(crtc);
> + return 0;
> +}
> +
> +#ifdef USE_LUT
> +static void atmel_hlcdc_crtc_load_lut(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + int i;
> +
> + if (!crtc->enabled)
> + return;
> +
> + for (i = 0; i < 256; i++)
> + hlcdc_write(dev, ATMEL_HLCDC_LUT + (i*4),
> + (atmel_hlcdc_crtc->lut_r[i] << 16) |
> + (atmel_hlcdc_crtc->lut_g[i] << 8) |
> + (atmel_hlcdc_crtc->lut_b[i] << 0));
> +}
> +void atmel_hlcdc_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
> + u16 blue, int regno)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> +
> + atmel_hlcdc_crtc->lut_r[regno] = red;
> + atmel_hlcdc_crtc->lut_g[regno] = green;
> + atmel_hlcdc_crtc->lut_b[regno] = blue;
> +}
> +
> +void atmel_hlcdc_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
> + u16 *blue, int regno)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> +
> + *red = atmel_hlcdc_crtc->lut_r[regno];
> + *green = atmel_hlcdc_crtc->lut_g[regno];
> + *blue = atmel_hlcdc_crtc->lut_b[regno];
> +}
> +#endif
> +
> +static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
> + .destroy = atmel_hlcdc_crtc_destroy,
> + .set_config = drm_crtc_helper_set_config,
> + .page_flip = atmel_hlcdc_crtc_page_flip,
> +};
> +
> +static const struct drm_crtc_helper_funcs atmel_hlcdc_crtc_helper_funcs = {
> + .dpms = atmel_hlcdc_crtc_dpms,
> + .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
> + .prepare = atmel_hlcdc_crtc_prepare,
> + .commit = atmel_hlcdc_crtc_commit,
> + .mode_set = atmel_hlcdc_crtc_mode_set,
> + .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
>
> +/*
> + * DRM operations:
> + */
> +
> +static int atmel_hlcdc_unload(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct atmel_hlcdc_module *mod, *cur;
> +
> + drm_kms_helper_poll_fini(dev);
> + drm_mode_config_cleanup(dev);
> + drm_vblank_cleanup(dev);
> +
> + pm_runtime_get_sync(dev->dev);
> + drm_irq_uninstall(dev);
> + pm_runtime_put_sync(dev->dev);
> +
> +#ifdef CONFIG_CPU_FREQ
> + cpufreq_unregister_notifier(&priv->freq_transition,
> + CPUFREQ_TRANSITION_NOTIFIER);
> +#endif
> +
> + if (priv->clk)
> + clk_put(priv->clk);
> +
> + if (priv->mmio)
> + iounmap(priv->mmio);
> +
> + flush_workqueue(priv->wq);
> + destroy_workqueue(priv->wq);
> +
> + dev->dev_private = NULL;
> +
> + pm_runtime_disable(dev->dev);
> +
> + list_for_each_entry_safe(mod, cur, &module_list, list) {
> + DBG("destroying module: %s", mod->name);
> + mod->funcs->destroy(mod);
> + }
> +
> + kfree(priv);
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_load(struct drm_device *dev, unsigned long flags)
> +{
> + struct platform_device *pdev = dev->platformdev;
> + struct device_node *node = pdev->dev.of_node;
> + struct atmel_hlcdc_drm_private *priv;
> + struct atmel_hlcdc_module *mod;
> + struct resource *res;
> + u32 bpp = 0;
> + int ret;
> +
> + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> + if (!priv) {
> + dev_err(dev->dev, "failed to allocate private data\n");
> + return -ENOMEM;
> + }
> +
> + dev->dev_private = priv;
> +
> + priv->wq = alloc_ordered_workqueue("atmel_hlcdc", 0);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev->dev, "failed to get memory resource\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + priv->mmio = ioremap_nocache(res->start, resource_size(res));
> + if (!priv->mmio) {
> + dev_err(dev->dev, "failed to ioremap\n");
> + ret = -ENOMEM;
> + goto fail;
> + }
> +
> + priv->clk = clk_get(dev->dev, "lcdc_clk");
Make use of devm functions whenever possible.
> + if (IS_ERR(priv->clk)) {
> + dev_err(dev->dev, "failed to get lcd clock\n");
> + ret = -ENODEV;
> + goto fail;
> + }
> + clk_prepare_enable(priv->clk);
> +
> + priv->bus_clk = clk_get(dev->dev, "bus_clk");
> + if (IS_ERR(priv->bus_clk)) {
> + dev_dbg(dev->dev, "no bus clock defined.\n");
> + priv->bus_clk = NULL;
> + }
> + if (priv->bus_clk)
> + clk_prepare_enable(priv->bus_clk);
> +
> +#ifdef CONFIG_CPU_FREQ
> + priv->lcd_fck_rate = clk_get_rate(priv->clk);
> + priv->freq_transition.notifier_call = cpufreq_transition;
> + ret = cpufreq_register_notifier(&priv->freq_transition,
> + CPUFREQ_TRANSITION_NOTIFIER);
> + if (ret) {
> + dev_err(dev->dev, "failed to register cpufreq notifier\n");
> + goto fail;
> + }
> +#endif
> +
> + if (of_property_read_u32(node, "default-lcdcfg5",
> + &priv->default_lcdcfg5))
> + priv->default_lcdcfg5 = LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
> +
> + DBG("LCDCFG5 default value 0x%x", priv->default_lcdcfg5);
> +
> + if (of_property_read_u32(node, "guard-time", &priv->guard_time))
> + priv->guard_time = 9;
> +
> + DBG("Guard time Value 0x%x", priv->guard_time);
> +
> + if (of_property_read_u32(node, "hlcdc,max-pixelclock",
> + &priv->max_pixelclock))
> + priv->max_pixelclock = ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK;
> +
> + DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
> +
> + pm_runtime_enable(dev->dev);
> +
> + ret = modeset_init(dev);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to initialize mode setting\n");
> + goto fail;
> + }
> +
> + ret = drm_vblank_init(dev, 1);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to initialize vblank\n");
> + goto fail;
> + }
> +
> + pm_runtime_get_sync(dev->dev);
> + ret = drm_irq_install(dev);
> + pm_runtime_put_sync(dev->dev);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to install IRQ handler\n");
> + goto fail;
> + }
> +
> + platform_set_drvdata(pdev, dev);
> +
> + list_for_each_entry(mod, &module_list, list) {
> + DBG("%s: preferred_bpp: %d", mod->name, mod->preferred_bpp);
> + bpp = mod->preferred_bpp;
> + if (bpp > 0)
> + break;
> + }
> +
> + priv->fbdev = drm_fbdev_cma_init(dev, bpp,
> + dev->mode_config.num_crtc,
> + dev->mode_config.num_connector);
> + drm_kms_helper_poll_init(dev);
> +
> + return 0;
> +
> +fail:
> + atmel_hlcdc_unload(dev);
> + return ret;
> +}
> +
> +static void atmel_hlcdc_preclose(struct drm_device *dev, struct drm_file *file)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + atmel_hlcdc_crtc_cancel_page_flip(priv->crtc, file);
> +}
> +
> +static void atmel_hlcdc_lastclose(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + drm_fbdev_cma_restore_mode(priv->fbdev);
> +}
> +
[...]
> +/*
> + * Connector:
> + */
> +
> +struct panel_connector {
> + struct drm_connector base;
> +
> + struct drm_encoder *encoder; /* our connected encoder */
> + struct panel_module *mod;
> +};
> +#define to_panel_connector(x) container_of(x, struct panel_connector, base)
> +
> +
> +static void panel_connector_destroy(struct drm_connector *connector)
> +{
> + struct panel_connector *panel_con = to_panel_connector(connector);
> + drm_connector_cleanup(connector);
> + kfree(panel_con);
> +}
> +
> +static enum drm_connector_status panel_connector_detect(
> + struct drm_connector *connector,
>
> +static struct of_device_id panel_of_match[];
> +
> +static int panel_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct panel_module *panel_mod;
> + struct atmel_hlcdc_module *mod;
> + struct pinctrl *pinctrl;
> + int ret = -EINVAL;
> +
> + /* bail out early if no DT data: */
> + if (!node) {
> + dev_err(&pdev->dev, "device-tree data is missing\n");
> + return -ENXIO;
> + }
> + panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
> + if (!panel_mod)
> + return -ENOMEM;
> +
> + mod = &panel_mod->base;
> +
> + pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> + if (IS_ERR(pinctrl))
> + dev_warn(&pdev->dev, "pins are not configured\n");
> +
> + panel_mod->timings = of_get_display_timings(node);
> + if (!panel_mod->timings) {
> + dev_err(&pdev->dev, "could not get panel timings\n");
> + goto fail;
> + }
> +
> + if (of_get_panel_info(&pdev->dev, node, panel_mod) < 0) {
> + dev_err(&pdev->dev, "could not get panel info\n");
> + goto fail;
> + }
> +
> + mod->preferred_bpp = panel_mod->preferred_bpp;
> +
> + panel_mod->backlight = of_find_backlight_by_node(node);
> + if (panel_mod->backlight)
> + dev_info(&pdev->dev, "found backlight\n");
> +
> +
> + atmel_hlcdc_module_init(mod, "panel", &panel_module_ops);
> +
> + return 0;
> +
> +fail:
> + panel_destroy(mod);
> + return ret;
> +}
> +
> +static int panel_remove(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +static struct of_device_id panel_of_match[] = {
> + { .compatible = "atmel,hlcdc,panel", },
> + { },
> +};
> +
> +struct platform_driver panel_driver = {
> + .probe = panel_probe,
> + .remove = panel_remove,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "panel",
> + .of_match_table = panel_of_match,
> + },
> +};
> +
> +int __init atmel_hlcdc_panel_init(void)
> +{
> + return platform_driver_register(&panel_driver);
> +}
> +
> +void __exit atmel_hlcdc_panel_fini(void)
> +{
> + platform_driver_unregister(&panel_driver);
> +}
Wouldn't it make more sense to use the drm_panel infrastructure (and the
simple-panel driver) instead of implementing a new panel layer for the
HLCDC driver ?
You'd still have to implement the hlcdc glue to use an LCD panel (to
convert panel timings to hlcdc timings), but at least you'll reuse the
common DT bindings.
This is all for the moment, but I definitely need to dig more into the
code for a better review :-).
Best Regards,
Boris
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
> new file mode 100644
> index 0000000..0f66169
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
> @@ -0,0 +1,28 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + * Copyright (C) 2012 Texas Instruments
> + *
> + * Base on the tilcdc panel driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ATMEL_HLCDC_PANEL_H__
> +#define __ATMEL_HLCDC_PANEL_H__
> +
> +/* sub-module for generic lcd panel output */
> +
> +int atmel_hlcdc_panel_init(void);
> +void atmel_hlcdc_panel_fini(void);
> +
> +#endif /* __ATMEL_HLCDC_PANEL_H__ */
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-04-28 19:22 ` Boris BREZILLON
0 siblings, 0 replies; 41+ messages in thread
From: Boris BREZILLON @ 2014-04-28 19:22 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This is a first review, from someone who's clearly not a DRM/KMS expert
but who already thought about this specific driver :-).
I strongly recommend that you wait for DRM/KMS maintainers and/or
experienced developers reviews before modifying anything ;-).
On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
> ---
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
> 13 files changed, 3005 insertions(+)
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 8e7fa4d..13fec638 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -190,6 +190,8 @@ source "drivers/gpu/drm/omapdrm/Kconfig"
>
> source "drivers/gpu/drm/tilcdc/Kconfig"
>
> +source "drivers/gpu/drm/atmel_hlcdc/Kconfig"
> +
> source "drivers/gpu/drm/qxl/Kconfig"
>
> source "drivers/gpu/drm/bochs/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 292a79d..8245aa5 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
> obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
> obj-$(CONFIG_DRM_OMAP) += omapdrm/
> obj-$(CONFIG_DRM_TILCDC) += tilcdc/
> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc/
> obj-$(CONFIG_DRM_QXL) += qxl/
> obj-$(CONFIG_DRM_BOCHS) += bochs/
> obj-$(CONFIG_DRM_MSM) += msm/
> diff --git a/drivers/gpu/drm/atmel_hlcdc/Kconfig b/drivers/gpu/drm/atmel_hlcdc/Kconfig
> new file mode 100644
> index 0000000..6ee5989
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/Kconfig
> @@ -0,0 +1,13 @@
> +config DRM_ATMEL_HLCDC
> + tristate "DRM Support for ATMEL HLCDC Display Controller"
> + depends on DRM && OF && ARM
> + select DRM_KMS_HELPER
> + select DRM_KMS_FB_HELPER
> + select DRM_KMS_CMA_HELPER
> + select DRM_GEM_CMA_HELPER
> + select VIDEOMODE_HELPERS
> + select BACKLIGHT_CLASS_DEVICE
> + select BACKLIGHT_LCD_SUPPORT
> + help
> + Choose this option if you have an ATMEL SoC with HLCDC display
> + controller, for example SAMA5D36EK.
> diff --git a/drivers/gpu/drm/atmel_hlcdc/Makefile b/drivers/gpu/drm/atmel_hlcdc/Makefile
> new file mode 100644
> index 0000000..4935c36
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/Makefile
> @@ -0,0 +1,12 @@
> +ccflags-y := -Iinclude/drm
> +ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
> + ccflags-y += -Werror
> +endif
> +
> +atmel_hlcdc-y := \
> + atmel_hlcdc_crtc.o \
> + atmel_hlcdc_panel.o \
> + atmel_hlcdc_backlight.o \
> + atmel_hlcdc_drv.o
> +
> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc.o
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> new file mode 100644
> index 0000000..8ed0767
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
> @@ -0,0 +1,771 @@
> +/*
> + * Header file for AT91 High end LCD Controller
> + *
> + * Data structure and register user interface
> + *
> + * Copyright (C) 2010 Atmel Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + */
> +#ifndef __ATMEL_HLCD_H__
> +#define __ATMEL_HLCD_H__
> +
> +/* Lcdc hardware registers */
> +#define ATMEL_LCDC_LCDCFG0 0x0000
> +#define LCDC_LCDCFG0_CLKPOL (0x1 << 0)
> +#define LCDC_LCDCFG0_CLKSEL (0x1 << 2)
> +#define LCDC_LCDCFG0_CLKPWMSEL (0x1 << 3)
> +#define LCDC_LCDCFG0_CGDISBASE (0x1 << 8)
> +#define LCDC_LCDCFG0_CGDISOVR1 (0x1 << 9)
> +#define LCDC_LCDCFG0_CGDISOVR2 (0x1 << 10)
> +#define LCDC_LCDCFG0_CGDISHEO (0x1 << 11)
> +#define LCDC_LCDCFG0_CGDISHCR (0x1 << 12)
> +#define LCDC_LCDCFG0_CGDISPP (0x1 << 13)
> +#define LCDC_LCDCFG0_CLKDIV_OFFSET 16
> +#define LCDC_LCDCFG0_CLKDIV (0xff << LCDC_LCDCFG0_CLKDIV_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG1 0x0004
> +#define LCDC_LCDCFG1_HSPW_OFFSET 0
> +#define LCDC_LCDCFG1_HSPW (0x3f << LCDC_LCDCFG1_HSPW_OFFSET)
> +#define LCDC_LCDCFG1_VSPW_OFFSET 16
> +#define LCDC_LCDCFG1_VSPW (0x3f << LCDC_LCDCFG1_VSPW_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG2 0x0008
> +#define LCDC_LCDCFG2_VFPW_OFFSET 0
> +#define LCDC_LCDCFG2_VFPW (0x3f << LCDC_LCDCFG2_VFPW_OFFSET)
> +#define LCDC_LCDCFG2_VBPW_OFFSET 16
> +#define LCDC_LCDCFG2_VBPW (0x3f << LCDC_LCDCFG2_VBPW_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG3 0x000C
> +#define LCDC_LCDCFG3_HFPW_OFFSET 0
> +#define LCDC_LCDCFG3_HFPW (0xff << LCDC_LCDCFG3_HFPW_OFFSET)
> +#define LCDC2_LCDCFG3_HFPW (0x1ff << LCDC_LCDCFG3_HFPW_OFFSET)
> +#define LCDC_LCDCFG3_HBPW_OFFSET 16
> +#define LCDC_LCDCFG3_HBPW (0xff << LCDC_LCDCFG3_HBPW_OFFSET)
> +#define LCDC2_LCDCFG3_HBPW (0x1ff << LCDC_LCDCFG3_HBPW_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG4 0x0010
> +#define LCDC_LCDCFG4_PPL_OFFSET 0
> +#define LCDC_LCDCFG4_PPL (0x7ff << LCDC_LCDCFG4_PPL_OFFSET)
> +#define LCDC_LCDCFG4_RPF_OFFSET 16
> +#define LCDC_LCDCFG4_RPF (0x7ff << LCDC_LCDCFG4_RPF_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG5 0x0014
> +#define LCDC_LCDCFG5_HSPOL (0x1 << 0)
> +#define LCDC_LCDCFG5_VSPOL (0x1 << 1)
> +#define LCDC_LCDCFG5_VSPDLYS (0x1 << 2)
> +#define LCDC_LCDCFG5_VSPDLYE (0x1 << 3)
> +#define LCDC_LCDCFG5_DISPPOL (0x1 << 4)
> +#define LCDC_LCDCFG5_SERIAL (0x1 << 5)
> +#define LCDC_LCDCFG5_DITHER (0x1 << 6)
> +#define LCDC_LCDCFG5_DISPDLY (0x1 << 7)
> +#define LCDC_LCDCFG5_MODE_OFFSET 8
> +#define LCDC_LCDCFG5_MODE (0x3 << LCDC_LCDCFG5_MODE_OFFSET)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_12BPP (0x0 << 8)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_16BPP (0x1 << 8)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_18BPP (0x2 << 8)
> +#define LCDC_LCDCFG5_MODE_OUTPUT_24BPP (0x3 << 8)
> +#define LCDC_LCDCFG5_PP (0x1 << 10)
> +#define LCDC_LCDCFG5_VSPSU (0x1 << 12)
> +#define LCDC_LCDCFG5_VSPHO (0x1 << 13)
> +#define LCDC_LCDCFG5_GUARDTIME_OFFSET 16
> +#define LCDC_LCDCFG5_GUARDTIME (0x1f << LCDC_LCDCFG5_GUARDTIME_OFFSET)
> +
> +#define ATMEL_LCDC_LCDCFG6 0x0018
> +#define LCDC_LCDCFG6_PWMPS_OFFSET 0
> +#define LCDC_LCDCFG6_PWMPS (0x7 << LCDC_LCDCFG6_PWMPS_OFFSET)
> +#define LCDC_LCDCFG6_PWMPOL (0x1 << 4)
> +#define LCDC_LCDCFG6_PWMCVAL_OFFSET 8
> +#define LCDC_LCDCFG6_PWMCVAL (0xff << LCDC_LCDCFG6_PWMCVAL_OFFSET)
> +
> +#define ATMEL_LCDC_LCDEN 0x0020
> +#define LCDC_LCDEN_CLKEN (0x1 << 0)
> +#define LCDC_LCDEN_SYNCEN (0x1 << 1)
> +#define LCDC_LCDEN_DISPEN (0x1 << 2)
> +#define LCDC_LCDEN_PWMEN (0x1 << 3)
> +
> +#define ATMEL_LCDC_LCDDIS 0x0024
> +#define LCDC_LCDDIS_CLKDIS (0x1 << 0)
> +#define LCDC_LCDDIS_SYNCDIS (0x1 << 1)
> +#define LCDC_LCDDIS_DISPDIS (0x1 << 2)
> +#define LCDC_LCDDIS_PWMDIS (0x1 << 3)
> +#define LCDC_LCDDIS_CLKRST (0x1 << 8)
> +#define LCDC_LCDDIS_SYNCRST (0x1 << 9)
> +#define LCDC_LCDDIS_DISPRST (0x1 << 10)
> +#define LCDC_LCDDIS_PWMRST (0x1 << 11)
> +
> +#define ATMEL_LCDC_LCDSR 0x0028
> +#define LCDC_LCDSR_CLKSTS (0x1 << 0)
> +#define LCDC_LCDSR_LCDSTS (0x1 << 1)
> +#define LCDC_LCDSR_DISPSTS (0x1 << 2)
> +#define LCDC_LCDSR_PWMSTS (0x1 << 3)
> +#define LCDC_LCDSR_SIPSTS (0x1 << 4)
> +
> +#define ATMEL_LCDC_LCDIER 0x002C
> +#define LCDC_LCDIER_SOFIE (0x1 << 0)
> +#define LCDC_LCDIER_DISIE (0x1 << 1)
> +#define LCDC_LCDIER_DISPIE (0x1 << 2)
> +#define LCDC_LCDIER_FIFOERRIE (0x1 << 4)
> +#define LCDC_LCDIER_BASEIE (0x1 << 8)
> +#define LCDC_LCDIER_OVR1IE (0x1 << 9)
> +#define LCDC_LCDIER_OVR2IE (0x1 << 10)
> +#define LCDC_LCDIER_HEOIE (0x1 << 11)
> +#define LCDC_LCDIER_HCRIE (0x1 << 12)
> +#define LCDC_LCDIER_PPIE (0x1 << 13)
> +
> +#define ATMEL_LCDC_LCDIDR 0x0030
> +#define LCDC_LCDIDR_SOFID (0x1 << 0)
> +#define LCDC_LCDIDR_DISID (0x1 << 1)
> +#define LCDC_LCDIDR_DISPID (0x1 << 2)
> +#define LCDC_LCDIDR_FIFOERRID (0x1 << 4)
> +#define LCDC_LCDIDR_BASEID (0x1 << 8)
> +#define LCDC_LCDIDR_OVR1ID (0x1 << 9)
> +#define LCDC_LCDIDR_OVR2ID (0x1 << 10)
> +#define LCDC_LCDIDR_HEOID (0x1 << 11)
> +#define LCDC_LCDIDR_HCRID (0x1 << 12)
> +#define LCDC_LCDIDR_PPID (0x1 << 13)
> +
> +#define ATMEL_LCDC_LCDIMR 0x0034
> +#define LCDC_LCDIMR_SOFIM (0x1 << 0)
> +#define LCDC_LCDIMR_DISIM (0x1 << 1)
> +#define LCDC_LCDIMR_DISPIM (0x1 << 2)
> +#define LCDC_LCDIMR_FIFOERRIM (0x1 << 4)
> +#define LCDC_LCDIMR_BASEIM (0x1 << 8)
> +#define LCDC_LCDIMR_OVR1IM (0x1 << 9)
> +#define LCDC_LCDIMR_OVR2IM (0x1 << 10)
> +#define LCDC_LCDIMR_HEOIM (0x1 << 11)
> +#define LCDC_LCDIMR_HCRIM (0x1 << 12)
> +#define LCDC_LCDIMR_PPIM (0x1 << 13)
> +
> +#define ATMEL_LCDC_LCDISR 0x0038
> +#define LCDC_LCDISR_SOF (0x1 << 0)
> +#define LCDC_LCDISR_DIS (0x1 << 1)
> +#define LCDC_LCDISR_DISP (0x1 << 2)
> +#define LCDC_LCDISR_FIFOERR (0x1 << 4)
> +#define LCDC_LCDISR_BASE (0x1 << 8)
> +#define LCDC_LCDISR_OVR1 (0x1 << 9)
> +#define LCDC_LCDISR_OVR2 (0x1 << 10)
> +#define LCDC_LCDISR_HEO (0x1 << 11)
> +#define LCDC_LCDISR_HCR (0x1 << 12)
> +#define LCDC_LCDISR_PP (0x1 << 13)
> +
> +#define ATMEL_LCDC_BASECHER 0x0040
> +#define LCDC_BASECHER_CHEN (0x1 << 0)
> +#define LCDC_BASECHER_UPDATEEN (0x1 << 1)
> +#define LCDC_BASECHER_A2QEN (0x1 << 2)
> +
> +#define ATMEL_LCDC_BASECHDR 0x0044
> +#define LCDC_BASECHDR_CHDIS (0x1 << 0)
> +#define LCDC_BASECHDR_CHRST (0x1 << 8)
> +
> +#define ATMEL_LCDC_BASECHSR 0x0048
> +#define LCDC_BASECHSR_CHSR (0x1 << 0)
> +#define LCDC_BASECHSR_UPDATESR (0x1 << 1)
> +#define LCDC_BASECHSR_A2QSR (0x1 << 2)
> +
> +#define ATMEL_LCDC_BASEIER 0x004C
> +#define LCDC_BASEIER_DMA (0x1 << 2)
> +#define LCDC_BASEIER_DSCR (0x1 << 3)
> +#define LCDC_BASEIER_ADD (0x1 << 4)
> +#define LCDC_BASEIER_DONE (0x1 << 5)
> +#define LCDC_BASEIER_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEIDR 0x0050
> +#define LCDC_BASEIDR_DMA (0x1 << 2)
> +#define LCDC_BASEIDR_DSCR (0x1 << 3)
> +#define LCDC_BASEIDR_ADD (0x1 << 4)
> +#define LCDC_BASEIDR_DONE (0x1 << 5)
> +#define LCDC_BASEIDR_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEIMR 0x0054
> +#define LCDC_BASEIMR_DMA (0x1 << 2)
> +#define LCDC_BASEIMR_DSCR (0x1 << 3)
> +#define LCDC_BASEIMR_ADD (0x1 << 4)
> +#define LCDC_BASEIMR_DONE (0x1 << 5)
> +#define LCDC_BASEIMR_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEISR 0x0058
> +#define LCDC_BASEISR_DMA (0x1 << 2)
> +#define LCDC_BASEISR_DSCR (0x1 << 3)
> +#define LCDC_BASEISR_ADD (0x1 << 4)
> +#define LCDC_BASEISR_DONE (0x1 << 5)
> +#define LCDC_BASEISR_OVR (0x1 << 6)
> +
> +#define ATMEL_LCDC_BASEHEAD 0x005C
> +
> +#define ATMEL_LCDC_BASEADDR 0x0060
> +
> +#define ATMEL_LCDC_BASECTRL 0x0064
> +#define LCDC_BASECTRL_DFETCH (0x1 << 0)
> +#define LCDC_BASECTRL_LFETCH (0x1 << 1)
> +#define LCDC_BASECTRL_DMAIEN (0x1 << 2)
> +#define LCDC_BASECTRL_DSCRIEN (0x1 << 3)
> +#define LCDC_BASECTRL_ADDIEN (0x1 << 4)
> +#define LCDC_BASECTRL_DONEIEN (0x1 << 5)
> +
> +#define ATMEL_LCDC_BASENEXT 0x0068
> +
> +#define ATMEL_LCDC_BASECFG0 0x006C
> +#define LCDC_BASECFG0_SIF (0x1 << 0)
> +#define LCDC_BASECFG0_BLEN_OFFSET 4
> +#define LCDC_BASECFG0_BLEN (0x3 << LCDC_BASECFG0_BLEN_OFFSET)
> +#define LCDC_BASECFG0_BLEN_AHB_SINGLE (0x0 << 4)
> +#define LCDC_BASECFG0_BLEN_AHB_INCR4 (0x1 << 4)
> +#define LCDC_BASECFG0_BLEN_AHB_INCR8 (0x2 << 4)
> +#define LCDC_BASECFG0_BLEN_AHB_INCR16 (0x3 << 4)
> +#define LCDC_BASECFG0_DLBO (0x1 << 8)
> +
> +#define ATMEL_LCDC_BASECFG1 0x0070
> +#define LCDC_BASECFG1_CLUTEN (0x1 << 0)
> +#define LCDC_BASECFG1_RGBMODE_OFFSET 4
> +#define LCDC_BASECFG1_RGBMODE (0xf << LCDC_BASECFG1_RGBMODE_OFFSET)
> +#define LCDC_BASECFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
> +#define LCDC_BASECFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
> +#define LCDC_BASECFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
> +#define LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
> +#define LCDC_BASECFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
> +#define LCDC_BASECFG1_CLUTMODE_OFFSET 8
> +#define LCDC_BASECFG1_CLUTMODE (0x3 << LCDC_BASECFG1_CLUTMODE_OFFSET)
> +#define LCDC_BASECFG1_CLUTMODE_1BPP (0x0 << 8)
> +#define LCDC_BASECFG1_CLUTMODE_2BPP (0x1 << 8)
> +#define LCDC_BASECFG1_CLUTMODE_4BPP (0x2 << 8)
> +#define LCDC_BASECFG1_CLUTMODE_8BPP (0x3 << 8)
> +
> +#define ATMEL_LCDC_BASECFG2 0x0074
> +
> +#define ATMEL_LCDC_BASECFG3 0x0078
> +#define LCDC_BASECFG3_BDEF_OFFSET 0
> +#define LCDC_BASECFG3_BDEF (0xff << LCDC_BASECFG3_BDEF_OFFSET)
> +#define LCDC_BASECFG3_GDEF_OFFSET 8
> +#define LCDC_BASECFG3_GDEF (0xff << LCDC_BASECFG3_GDEF_OFFSET)
> +#define LCDC_BASECFG3_RDEF_OFFSET 16
> +#define LCDC_BASECFG3_RDEF (0xff << LCDC_BASECFG3_RDEF_OFFSET)
> +
> +#define ATMEL_LCDC_BASECFG4 0x007C
> +#define LCDC_BASECFG4_DMA (0x1 << 8)
> +#define LCDC_BASECFG4_REP (0x1 << 9)
> +#define LCDC_BASECFG4_DISCEN (0x1 << 11)
> +
> +#define ATMEL_LCDC_BASECFG5 0x0080
> +#define LCDC_BASECFG5_DISCXPOS_OFFSET 0
> +#define LCDC_BASECFG5_DISCXPOS (0x7ff << LCDC_BASECFG5_DISCXPOS_OFFSET)
> +#define LCDC_BASECFG5_DISCYPOS_OFFSET 16
> +#define LCDC_BASECFG5_DISCYPOS (0x7ff << LCDC_BASECFG5_DISCYPOS_OFFSET)
> +
> +#define ATMEL_LCDC_BASECFG6 0x0084
> +#define LCDC_BASECFG6_DISCXSIZE_OFFSET 0
> +#define LCDC_BASECFG6_DISCXSIZE (0x7ff << LCDC_BASECFG6_DISCXSIZE_OFFSET)
> +#define LCDC_BASECFG6_DISCYSIZE_OFFSET 16
> +#define LCDC_BASECFG6_DISCYSIZE (0x7ff << LCDC_BASECFG6_DISCYSIZE_OFFSET)
> +
All layers use pretty much the same layout (IER,IDR, IMR, HEAD, ADDR, ...).
Maybe you could define something like this:
ATMEL_LCDC_CHER(layer) (layer->reg_offset + (0x0))
ATMEL_LCDC_CHDR(layer) (layer->reg_offset + (0x4))
...
with each layer storing its own reg_offset.
IMHO, this would reduce the MACRO list size and thus make this file more
readable.
> +#define ATMEL_LCDC_HEOCHER 0x0280
> +#define ATMEL_LCDC2_HEOCHER 0x0340
> +#define LCDC_HEOCHER_CHEN (0x1 << 0)
> +#define LCDC_HEOCHER_UPDATEEN (0x1 << 1)
> +#define LCDC_HEOCHER_A2QEN (0x1 << 2)
[...]
> +#define ATMEL_LCDC_HCRCLUT 0x1400
> +#define ATMEL_LCDC2_HCRCLUT 0x1600
> +#define LCDC_HCRCLUT_BCLUT_OFFSET 0
> +#define LCDC_HCRCLUT_BCLUT (0xff << LCDC_HCRCLUT_BCLUT_OFFSET)
> +#define LCDC_HCRCLUT_GCLUT_OFFSET 8
> +#define LCDC_HCRCLUT_GCLUT (0xff << LCDC_HCRCLUT_GCLUT_OFFSET)
> +#define LCDC_HCRCLUT_RCLUT_OFFSET 16
> +#define LCDC_HCRCLUT_RCLUT (0xff << LCDC_HCRCLUT_RCLUT_OFFSET)
> +#define LCDC_HCRCLUT_ACLUT_OFFSET 24
> +#define LCDC_HCRCLUT_ACLUT (0xff << LCDC_HCRCLUT_ACLUT_OFFSET)
> +
> +/* Base layer CLUT */
> +#define ATMEL_HLCDC_LUT 0x0400
> +
> +
> +static inline void hlcdc_write(struct drm_device *dev, u32 reg, u32 data)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + iowrite32(data, priv->mmio + reg);
> +}
> +
> +static inline u32 hlcdc_read(struct drm_device *dev, u32 reg)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + return ioread32(priv->mmio + reg);
> +}
> +
> +#endif /* __ATMEL_HLCDC4_H__ */
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> new file mode 100644
> index 0000000..143ba72
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
> @@ -0,0 +1,92 @@
> +/*
> + * atmel_hlcdc_backlight.c -- Backlight driver for the atmel HLCDC controller
> + *
> + * Copyright (C) 2014 Traphandler
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/backlight.h>
> +
> +#include "atmel_hlcdc_drv.h"
> +#include "atmel_hlcdc.h"
> +
> +#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
> +
> +
> +static int get_brightness(struct backlight_device *backlight)
> +{
> + struct drm_device *dev = bl_get_data(backlight);
> +
> + return (hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & LCDC_LCDCFG6_PWMCVAL)
> + >> LCDC_LCDCFG6_PWMCVAL_OFFSET;
> +}
> +
> +static int update_status(struct backlight_device *backlight)
> +{
> + struct drm_device *dev = bl_get_data(backlight);
> + int brightness = backlight->props.brightness;
> + u32 reg;
> +
> + if (backlight->props.power != FB_BLANK_UNBLANK ||
> + backlight->props.state & BL_CORE_SUSPENDED)
> + brightness = 0;
> +
> + reg = hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & ~LCDC_LCDCFG6_PWMCVAL;
> + reg |= brightness << LCDC_LCDCFG6_PWMCVAL_OFFSET;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, reg);
> + DBG("new brightness is : %d\n", get_brightness(backlight));
> + return 0;
> +}
> +
> +
> +
> +static const struct backlight_ops atmel_drm_backlight_ops = {
> + .options = BL_CORE_SUSPENDRESUME,
> + .update_status = update_status,
> + .get_brightness = get_brightness,
> +};
> +
> +int atmel_drm_backlight_init(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct backlight_device *backlight;
> +
> + backlight = backlight_device_register("backlight", dev->dev, dev,
> + &atmel_drm_backlight_ops , NULL);
> + if (IS_ERR(backlight)) {
> + dev_err(dev->dev, "unable to register backlight device: %ld\n",
> + PTR_ERR(backlight));
> + return PTR_ERR(backlight);
> + }
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
> + (ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
> +
> + backlight->props.max_brightness = 0xFF;
> + backlight->props.brightness = get_brightness(backlight);
> + backlight->props.power = FB_BLANK_UNBLANK;
> + backlight_update_status(backlight);
> +
> + priv->backlight = backlight;
> +
> + return 0;
> +}
> +
> +void atmel_drm_backlight_exit(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> +
> + backlight_device_unregister(priv->backlight);
> +}
Atmel's datasheet describe it as a PWM (that will most likely be used as
a backlight, but still :-)).
How about implementing a pwm chip and then use the backlight-pwm driver
to expose a backlight device based on this PWM device ?
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> new file mode 100644
> index 0000000..6a99101
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
> @@ -0,0 +1,25 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ATMEL_HLCDC_BACKLIGHT_H__
> +#define __ATMEL_HLCDC_BACKLIGHT_H__
> +
> +int atmel_drm_backlight_init(struct drm_device *dev);
> +void atmel_drm_backlight_exit(struct drm_device *dev);
> +
> +#endif
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> new file mode 100644
> index 0000000..649fa19
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
> @@ -0,0 +1,702 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + *
> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
> + *
> + * Base on the tilcdc driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "drm_flip_work.h"
> +
> +#include "atmel_hlcdc_drv.h"
> +#include "atmel_hlcdc.h"
> +#include "atmel_hlcdc_ovl.h"
> +
> +#define MAX(x, y) ((x) > (y) ? (x) : (y))
> +
> +
> +struct atmel_hlcd_dma_desc {
> + u32 address;
I think you should use dma_addr_t instead of u32.
> + u32 control;
> + u32 next;
ditto
> + u32 dummy; /* for 64-bit alignment */
> +};
> +
> +enum {
> + DMA_BASE = 0,
> + DMA_OVR_1,
> + DMA_OVR_2,
> + DMA_HEO,
> + DMA_HCR,
> + DMA_PP,
> + DMA_MAX
> +};
> +
> +struct atmel_hlcdc_crtc {
> + struct drm_crtc base;
> + uint32_t dirty;
> + dma_addr_t start, end;
> + struct drm_pending_vblank_event *event;
> + int dpms;
> +
> + struct atmel_hlcd_dma_desc *dma_descs[DMA_MAX];
> + dma_addr_t dma_descs_phys[DMA_MAX];
> +
> + /* fb currently set to scanout 0/1: */
> + struct drm_framebuffer *fb;
> +
> + /* for deferred fb unref's: */
> + struct drm_flip_work unref_work;
> +#ifdef USE_LUT
> + u8 lut_r[256], lut_g[256], lut_b[256];
> +#endif
> +};
> +#define to_atmel_hlcdc_crtc(x) container_of(x, struct atmel_hlcdc_crtc, base)
> +
> +static void unref_worker(struct drm_flip_work *work, void *val)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc =
> + container_of(work, struct atmel_hlcdc_crtc, unref_work);
> + struct drm_device *dev = atmel_hlcdc_crtc->base.dev;
> +
> + mutex_lock(&dev->mode_config.mutex);
> + drm_framebuffer_unreference(val);
> + mutex_unlock(&dev->mode_config.mutex);
> +}
> +
> +static void update_scanout(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct drm_framebuffer *fb = crtc->fb;
> +
> + struct drm_gem_cma_object *gem;
> + struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
> + unsigned int depth, bpp;
> + dma_addr_t start;
> + dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
> +
> + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
> + gem = drm_fb_cma_get_gem_obj(fb, 0);
> +
> + start = gem->paddr + fb->offsets[0] +
> + (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
> +
> + if (hlcdc_crtc->fb != fb) {
> + struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
> + drm_framebuffer_reference(fb);
> + hlcdc_crtc->fb = fb;
> + if (oldfb) {
> + drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
> + drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
> + }
> + }
> +
> + if (desc->address != start) {
> + desc->address = start;
> + desc->next = desc_phys;
> + desc->control = LCDC_OVRCTRL_DFETCH;
> + }
> +
> + if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
> + hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
I read the datasheet several times, and wonder how this could work.
Here's what I understood:
If you want to initiate a DMA transfer and the layer channel is not
enabled yet, you have to write ATMEL_LCDC_BASEADDR, ATMEL_LCDC_BASENEXT
and ATMEL_LCDC_BASECTRL registers, and then write the CHEN bit in the
CHER register.
If the layer channel is already enabled and a DMA transfer is in
progress, you'd better use the HEAD pointer and write the A2QEN bit.
Here, you're only writing the NEXT pointer, and AFAICT this can only
work if the layer has already been enabled (by the bootloader for example).
> + hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
> + }
> +}
> +
> +static void start(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void stop(struct drm_crtc *crtc)
> +{
> + struct drm_device *dev = crtc->dev;
> +
> + /* Disable DISP signal */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
> + cpu_relax();
> + /* Disable synchronization */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
> + cpu_relax();
> + /* Disable pixel clock */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
> + cpu_relax();
> + /* Disable PWM */
> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
> + cpu_relax();
> +}
> +
> +static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
> +
> + drm_crtc_cleanup(crtc);
> + drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
> +
> + if (atmel_hlcdc_crtc->dma_descs[0])
> + dma_free_writecombine(dev->dev,
> + sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
> + atmel_hlcdc_crtc->dma_descs[0],
> + atmel_hlcdc_crtc->dma_descs_phys[0]);
> + kfree(atmel_hlcdc_crtc);
> +}
> +
> +static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
> + struct drm_framebuffer *fb,
> + struct drm_pending_vblank_event *event,
> + uint32_t page_flip_flags)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + if (atmel_hlcdc_crtc->event) {
> + dev_err(dev->dev, "already pending page flip!\n");
> + return -EBUSY;
> + }
> +
> + crtc->fb = fb;
> + atmel_hlcdc_crtc->event = event;
> + update_scanout(crtc);
> + return 0;
> +}
> +
> +static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> +
> + /* we really only care about on or off: */
> + if (mode != DRM_MODE_DPMS_ON)
> + mode = DRM_MODE_DPMS_OFF;
> +
> + if (atmel_hlcdc_crtc->dpms == mode)
> + return;
> +
> + atmel_hlcdc_crtc->dpms = mode;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (mode == DRM_MODE_DPMS_ON) {
> + pm_runtime_forbid(dev->dev);
> + start(crtc);
> + } else {
> + stop(crtc);
> + pm_runtime_allow(dev->dev);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + return true;
> +}
> +
> +static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +}
> +
> +static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
> +{
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
> +}
> +
> +static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
> +{
> + u32 value = 0;
> +
> + switch (depth) {
> + case 1:
> + value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 2:
> + value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 4:
> + value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 8:
> + value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
> + break;
> + case 12:
> + value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
> + break;
> + case 16:
> + value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
> + break;
> + case 18:
> + value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
> + break;
> + case 24:
> + value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
> + break;
> + case 32:
> + value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
> + break;
> + default:
> + dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
> + depth, bpp);
> + break;
> + }
> +
> + return value;
> +}
> +
> +
> +void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
> +{
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + unsigned long value;
> + unsigned long clk_value_khz;
> +
> + if (clock == 0)
> + clock = crtc->mode.clock;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + clk_value_khz = clk_get_rate(priv->clk) / 1000;
> +
> + value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
> +
> + if (value < 1) {
> + dev_notice(dev->dev, "using system clock as pixel clock\n");
> + value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + } else {
> + dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
> + clk_value_khz / value);
> + value = value - 2;
> + dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
> + value);
> + value = LCDC_LCDCFG0_CLKPWMSEL |
> + (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
> + | LCDC_LCDCFG0_CGDISBASE;
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
> + }
> +
> + pm_runtime_put_sync(dev->dev);
> +}
> +
> +static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode,
> + int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + int dpms = atmel_hlcdc_crtc->dpms;
> + int hbp, hfp, hsw, vbp, vfp, vsw;
> + unsigned int depth, bpp;
> + unsigned long value;
> + int ret;
> +
> + ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
> + if (WARN_ON(ret))
> + return ret;
> +
> + pm_runtime_get_sync(dev->dev);
> +
> + if (dpms == DRM_MODE_DPMS_ON)
> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
> +
> + dev_dbg(dev->dev, "%s:\n", __func__);
> +
> +
> + /* Set pixel clock */
> + atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
> +
> + /* Initialize control register 5 */
> + value = priv->default_lcdcfg5;
> + value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
> + | LCDC_LCDCFG5_DISPDLY
> + | LCDC_LCDCFG5_VSPDLYS;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
> + value |= LCDC_LCDCFG5_HSPOL;
> +
> + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
> + value |= LCDC_LCDCFG5_VSPOL;
> +
> + dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
> +
> +
> + /* Configure timings: */
> + hbp = MAX(mode->htotal - mode->hsync_end, 1);
> + hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
> + hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
> + vbp = MAX(mode->vtotal - mode->vsync_end, 0);
> + vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
> + vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
> +
> + DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
> + mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
> +
> + /* Vertical & Horizontal Timing */
> + value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
> + value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
> +
> + value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
> + value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
> +
> + value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
> + value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
> +
> + /* Display size */
> + value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
> + value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
> + dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
> +
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
> + LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
> +
> + drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
> + atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
> + hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
> +
> + /* Disable all interrupts */
> + hlcdc_write(dev, ATMEL_LCDC_LCDIDR, ~0UL);
> + hlcdc_write(dev, ATMEL_LCDC_BASEIDR, ~0UL);
> + /* Enable BASE LAYER overflow interrupts */
> + hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
> + /* Enable FIFO error interrupt and the global BASE LAYER interrupt*/
> + hlcdc_write(dev, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
> + LCDC_LCDIER_BASEIE);
> +
> +
> + update_scanout(crtc);
> +
> + atmel_hlcdc_crtc_dpms(crtc, dpms);
> +
> + pm_runtime_put_sync(dev->dev);
> + return 0;
> +}
> +
> +static int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> + struct drm_framebuffer *old_fb)
> +{
> + update_scanout(crtc);
> + return 0;
> +}
> +
> +#ifdef USE_LUT
> +static void atmel_hlcdc_crtc_load_lut(struct drm_crtc *crtc)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + int i;
> +
> + if (!crtc->enabled)
> + return;
> +
> + for (i = 0; i < 256; i++)
> + hlcdc_write(dev, ATMEL_HLCDC_LUT + (i*4),
> + (atmel_hlcdc_crtc->lut_r[i] << 16) |
> + (atmel_hlcdc_crtc->lut_g[i] << 8) |
> + (atmel_hlcdc_crtc->lut_b[i] << 0));
> +}
> +void atmel_hlcdc_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
> + u16 blue, int regno)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> +
> + atmel_hlcdc_crtc->lut_r[regno] = red;
> + atmel_hlcdc_crtc->lut_g[regno] = green;
> + atmel_hlcdc_crtc->lut_b[regno] = blue;
> +}
> +
> +void atmel_hlcdc_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
> + u16 *blue, int regno)
> +{
> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
> +
> + *red = atmel_hlcdc_crtc->lut_r[regno];
> + *green = atmel_hlcdc_crtc->lut_g[regno];
> + *blue = atmel_hlcdc_crtc->lut_b[regno];
> +}
> +#endif
> +
> +static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
> + .destroy = atmel_hlcdc_crtc_destroy,
> + .set_config = drm_crtc_helper_set_config,
> + .page_flip = atmel_hlcdc_crtc_page_flip,
> +};
> +
> +static const struct drm_crtc_helper_funcs atmel_hlcdc_crtc_helper_funcs = {
> + .dpms = atmel_hlcdc_crtc_dpms,
> + .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
> + .prepare = atmel_hlcdc_crtc_prepare,
> + .commit = atmel_hlcdc_crtc_commit,
> + .mode_set = atmel_hlcdc_crtc_mode_set,
> + .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
>
> +/*
> + * DRM operations:
> + */
> +
> +static int atmel_hlcdc_unload(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + struct atmel_hlcdc_module *mod, *cur;
> +
> + drm_kms_helper_poll_fini(dev);
> + drm_mode_config_cleanup(dev);
> + drm_vblank_cleanup(dev);
> +
> + pm_runtime_get_sync(dev->dev);
> + drm_irq_uninstall(dev);
> + pm_runtime_put_sync(dev->dev);
> +
> +#ifdef CONFIG_CPU_FREQ
> + cpufreq_unregister_notifier(&priv->freq_transition,
> + CPUFREQ_TRANSITION_NOTIFIER);
> +#endif
> +
> + if (priv->clk)
> + clk_put(priv->clk);
> +
> + if (priv->mmio)
> + iounmap(priv->mmio);
> +
> + flush_workqueue(priv->wq);
> + destroy_workqueue(priv->wq);
> +
> + dev->dev_private = NULL;
> +
> + pm_runtime_disable(dev->dev);
> +
> + list_for_each_entry_safe(mod, cur, &module_list, list) {
> + DBG("destroying module: %s", mod->name);
> + mod->funcs->destroy(mod);
> + }
> +
> + kfree(priv);
> +
> + return 0;
> +}
> +
> +static int atmel_hlcdc_load(struct drm_device *dev, unsigned long flags)
> +{
> + struct platform_device *pdev = dev->platformdev;
> + struct device_node *node = pdev->dev.of_node;
> + struct atmel_hlcdc_drm_private *priv;
> + struct atmel_hlcdc_module *mod;
> + struct resource *res;
> + u32 bpp = 0;
> + int ret;
> +
> + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> + if (!priv) {
> + dev_err(dev->dev, "failed to allocate private data\n");
> + return -ENOMEM;
> + }
> +
> + dev->dev_private = priv;
> +
> + priv->wq = alloc_ordered_workqueue("atmel_hlcdc", 0);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(dev->dev, "failed to get memory resource\n");
> + ret = -EINVAL;
> + goto fail;
> + }
> +
> + priv->mmio = ioremap_nocache(res->start, resource_size(res));
> + if (!priv->mmio) {
> + dev_err(dev->dev, "failed to ioremap\n");
> + ret = -ENOMEM;
> + goto fail;
> + }
> +
> + priv->clk = clk_get(dev->dev, "lcdc_clk");
Make use of devm functions whenever possible.
> + if (IS_ERR(priv->clk)) {
> + dev_err(dev->dev, "failed to get lcd clock\n");
> + ret = -ENODEV;
> + goto fail;
> + }
> + clk_prepare_enable(priv->clk);
> +
> + priv->bus_clk = clk_get(dev->dev, "bus_clk");
> + if (IS_ERR(priv->bus_clk)) {
> + dev_dbg(dev->dev, "no bus clock defined.\n");
> + priv->bus_clk = NULL;
> + }
> + if (priv->bus_clk)
> + clk_prepare_enable(priv->bus_clk);
> +
> +#ifdef CONFIG_CPU_FREQ
> + priv->lcd_fck_rate = clk_get_rate(priv->clk);
> + priv->freq_transition.notifier_call = cpufreq_transition;
> + ret = cpufreq_register_notifier(&priv->freq_transition,
> + CPUFREQ_TRANSITION_NOTIFIER);
> + if (ret) {
> + dev_err(dev->dev, "failed to register cpufreq notifier\n");
> + goto fail;
> + }
> +#endif
> +
> + if (of_property_read_u32(node, "default-lcdcfg5",
> + &priv->default_lcdcfg5))
> + priv->default_lcdcfg5 = LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
> +
> + DBG("LCDCFG5 default value 0x%x", priv->default_lcdcfg5);
> +
> + if (of_property_read_u32(node, "guard-time", &priv->guard_time))
> + priv->guard_time = 9;
> +
> + DBG("Guard time Value 0x%x", priv->guard_time);
> +
> + if (of_property_read_u32(node, "hlcdc,max-pixelclock",
> + &priv->max_pixelclock))
> + priv->max_pixelclock = ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK;
> +
> + DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
> +
> + pm_runtime_enable(dev->dev);
> +
> + ret = modeset_init(dev);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to initialize mode setting\n");
> + goto fail;
> + }
> +
> + ret = drm_vblank_init(dev, 1);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to initialize vblank\n");
> + goto fail;
> + }
> +
> + pm_runtime_get_sync(dev->dev);
> + ret = drm_irq_install(dev);
> + pm_runtime_put_sync(dev->dev);
> + if (ret < 0) {
> + dev_err(dev->dev, "failed to install IRQ handler\n");
> + goto fail;
> + }
> +
> + platform_set_drvdata(pdev, dev);
> +
> + list_for_each_entry(mod, &module_list, list) {
> + DBG("%s: preferred_bpp: %d", mod->name, mod->preferred_bpp);
> + bpp = mod->preferred_bpp;
> + if (bpp > 0)
> + break;
> + }
> +
> + priv->fbdev = drm_fbdev_cma_init(dev, bpp,
> + dev->mode_config.num_crtc,
> + dev->mode_config.num_connector);
> + drm_kms_helper_poll_init(dev);
> +
> + return 0;
> +
> +fail:
> + atmel_hlcdc_unload(dev);
> + return ret;
> +}
> +
> +static void atmel_hlcdc_preclose(struct drm_device *dev, struct drm_file *file)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + atmel_hlcdc_crtc_cancel_page_flip(priv->crtc, file);
> +}
> +
> +static void atmel_hlcdc_lastclose(struct drm_device *dev)
> +{
> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
> + drm_fbdev_cma_restore_mode(priv->fbdev);
> +}
> +
[...]
> +/*
> + * Connector:
> + */
> +
> +struct panel_connector {
> + struct drm_connector base;
> +
> + struct drm_encoder *encoder; /* our connected encoder */
> + struct panel_module *mod;
> +};
> +#define to_panel_connector(x) container_of(x, struct panel_connector, base)
> +
> +
> +static void panel_connector_destroy(struct drm_connector *connector)
> +{
> + struct panel_connector *panel_con = to_panel_connector(connector);
> + drm_connector_cleanup(connector);
> + kfree(panel_con);
> +}
> +
> +static enum drm_connector_status panel_connector_detect(
> + struct drm_connector *connector,
>
> +static struct of_device_id panel_of_match[];
> +
> +static int panel_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct panel_module *panel_mod;
> + struct atmel_hlcdc_module *mod;
> + struct pinctrl *pinctrl;
> + int ret = -EINVAL;
> +
> + /* bail out early if no DT data: */
> + if (!node) {
> + dev_err(&pdev->dev, "device-tree data is missing\n");
> + return -ENXIO;
> + }
> + panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
> + if (!panel_mod)
> + return -ENOMEM;
> +
> + mod = &panel_mod->base;
> +
> + pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> + if (IS_ERR(pinctrl))
> + dev_warn(&pdev->dev, "pins are not configured\n");
> +
> + panel_mod->timings = of_get_display_timings(node);
> + if (!panel_mod->timings) {
> + dev_err(&pdev->dev, "could not get panel timings\n");
> + goto fail;
> + }
> +
> + if (of_get_panel_info(&pdev->dev, node, panel_mod) < 0) {
> + dev_err(&pdev->dev, "could not get panel info\n");
> + goto fail;
> + }
> +
> + mod->preferred_bpp = panel_mod->preferred_bpp;
> +
> + panel_mod->backlight = of_find_backlight_by_node(node);
> + if (panel_mod->backlight)
> + dev_info(&pdev->dev, "found backlight\n");
> +
> +
> + atmel_hlcdc_module_init(mod, "panel", &panel_module_ops);
> +
> + return 0;
> +
> +fail:
> + panel_destroy(mod);
> + return ret;
> +}
> +
> +static int panel_remove(struct platform_device *pdev)
> +{
> + return 0;
> +}
> +
> +static struct of_device_id panel_of_match[] = {
> + { .compatible = "atmel,hlcdc,panel", },
> + { },
> +};
> +
> +struct platform_driver panel_driver = {
> + .probe = panel_probe,
> + .remove = panel_remove,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "panel",
> + .of_match_table = panel_of_match,
> + },
> +};
> +
> +int __init atmel_hlcdc_panel_init(void)
> +{
> + return platform_driver_register(&panel_driver);
> +}
> +
> +void __exit atmel_hlcdc_panel_fini(void)
> +{
> + platform_driver_unregister(&panel_driver);
> +}
Wouldn't it make more sense to use the drm_panel infrastructure (and the
simple-panel driver) instead of implementing a new panel layer for the
HLCDC driver ?
You'd still have to implement the hlcdc glue to use an LCD panel (to
convert panel timings to hlcdc timings), but at least you'll reuse the
common DT bindings.
This is all for the moment, but I definitely need to dig more into the
code for a better review :-).
Best Regards,
Boris
> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
> new file mode 100644
> index 0000000..0f66169
> --- /dev/null
> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
> @@ -0,0 +1,28 @@
> +/*
> + * Copyright (C) 2014 Traphandler
> + * Copyright (C) 2012 Texas Instruments
> + *
> + * Base on the tilcdc panel driver
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ATMEL_HLCDC_PANEL_H__
> +#define __ATMEL_HLCDC_PANEL_H__
> +
> +/* sub-module for generic lcd panel output */
> +
> +int atmel_hlcdc_panel_init(void);
> +void atmel_hlcdc_panel_fini(void);
> +
> +#endif /* __ATMEL_HLCDC_PANEL_H__ */
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 0/3] DRM driver for the ATMEL High end LCD controller
2014-04-24 12:46 ` Tim Niemeyer
@ 2014-04-30 14:31 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-30 14:31 UTC (permalink / raw)
To: Tim Niemeyer, Boris BREZILLON
Cc: Robert Nelson, nicolas.ferre, linux-arm-kernel, dri-devel,
airlied, robdclark, plagnioj, linux-kernel
Hi Tim,
On 04/24/2014 02:46 PM, Tim Niemeyer wrote:
>
> Hi Boris
>
> Am Donnerstag, den 24.04.2014, 14:14 +0200 schrieb Boris BREZILLON:
>> Hi Tim,
>>
>> On 23/04/2014 17:36, Tim Niemeyer wrote:
>>> Hi Jean-Jacques,
>>>
>>> Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
>>>> Hi,
>>>>
>>>> this patch serie implements a simple DRM driver for the ATMEL High end LCD
>>>> controller found in the SAMA5 familly. It's based on the tilcdc driver.
>>>> It uses the cma_helper for memory and fbdev stuff.
>>>> Your comments are welcome !
>>> I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
>>> framebuffer device on the sama5d31-ek. Seems to work.
>>>
>>>> Supported features:
>>>> * the base layer (the main framebuffer)
>>> Tested to show a little tux png, but it's appearing only after
>>> 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
>>> is there missing some initializing?
>>
>> Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
> I can't see any difference with that.
>
> I used fbv to display the tux. With CONFIG_FRAMEBUFFER_CONSOLE=n the
> display stays with a small atmel logo and u-Boot version information. If
> i set CONFIG_FRAMEBUFFER_CONSOLE=y, the display is black after kernel
> start and fbv just works as expected.
>
I've been able to reproduce the problem. After some digging, I found
that trigerring a hotplug event with drm_kms_helper_hotplug_event() to
trigger a detection of the connectors at the end of atmel_hlcdc_load()
solves the issue. I don't know if this is a proper way to fix it though.
> Best Regards,
> Tim
>
>> Best Regards,
>>
>> Boris
>>
>>>
>>>> * a simple panel
>>>> * a backlight driver
>>> Tested to set brightness to 0, 20 and 255. Works.
>>>
>>> Thanks for your work.
>>>
>>> Best Regards
>>> Tim
>>>
>>>> * structure to 'easily' add other connectors (it comes from the tilcdc)
>>>>
>>>> On the todo list:
>>>> * support overlays as drm_planes
>>>> * support for the hardware cursor
>>>> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>>>>
>>>>
>>>> Jean-Jacques Hiblot (3):
>>>> atmel: drm: added drm driver for the atmel hlcd controller
>>>> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
>>>> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>>>>
>>>> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
>>>> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
>>>> drivers/gpu/drm/Kconfig | 2 +
>>>> drivers/gpu/drm/Makefile | 1 +
>>>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>>>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>>>> 15 files changed, 3042 insertions(+), 1 deletion(-)
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>>>
>>>> --
>>>> 1.9.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel@lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>
>
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 0/3] DRM driver for the ATMEL High end LCD controller
@ 2014-04-30 14:31 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-04-30 14:31 UTC (permalink / raw)
To: linux-arm-kernel
Hi Tim,
On 04/24/2014 02:46 PM, Tim Niemeyer wrote:
>
> Hi Boris
>
> Am Donnerstag, den 24.04.2014, 14:14 +0200 schrieb Boris BREZILLON:
>> Hi Tim,
>>
>> On 23/04/2014 17:36, Tim Niemeyer wrote:
>>> Hi Jean-Jacques,
>>>
>>> Am Freitag, den 18.04.2014, 11:45 +0200 schrieb Jean-Jacques Hiblot:
>>>> Hi,
>>>>
>>>> this patch serie implements a simple DRM driver for the ATMEL High end LCD
>>>> controller found in the SAMA5 familly. It's based on the tilcdc driver.
>>>> It uses the cma_helper for memory and fbdev stuff.
>>>> Your comments are welcome !
>>> I applied your and Robert's patches on a 3.15-rc2 kernel and tried the
>>> framebuffer device on the sama5d31-ek. Seems to work.
>>>
>>>> Supported features:
>>>> * the base layer (the main framebuffer)
>>> Tested to show a little tux png, but it's appearing only after
>>> 'echo 0 > /sys/devices/ahb.1/apb.2/f0030000.hlcdc/graphics/fb0/rotate'
>>> is there missing some initializing?
>>
>> Could you try to apply this http://code.bulix.org/f01kvh-86117 ?
> I can't see any difference with that.
>
> I used fbv to display the tux. With CONFIG_FRAMEBUFFER_CONSOLE=n the
> display stays with a small atmel logo and u-Boot version information. If
> i set CONFIG_FRAMEBUFFER_CONSOLE=y, the display is black after kernel
> start and fbv just works as expected.
>
I've been able to reproduce the problem. After some digging, I found
that trigerring a hotplug event with drm_kms_helper_hotplug_event() to
trigger a detection of the connectors at the end of atmel_hlcdc_load()
solves the issue. I don't know if this is a proper way to fix it though.
> Best Regards,
> Tim
>
>> Best Regards,
>>
>> Boris
>>
>>>
>>>> * a simple panel
>>>> * a backlight driver
>>> Tested to set brightness to 0, 20 and 255. Works.
>>>
>>> Thanks for your work.
>>>
>>> Best Regards
>>> Tim
>>>
>>>> * structure to 'easily' add other connectors (it comes from the tilcdc)
>>>>
>>>> On the todo list:
>>>> * support overlays as drm_planes
>>>> * support for the hardware cursor
>>>> * support for the SiI9022 HDMI connector (present on sama5d36ek)
>>>>
>>>>
>>>> Jean-Jacques Hiblot (3):
>>>> atmel: drm: added drm driver for the atmel hlcd controller
>>>> atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5
>>>> atmel: dt: Add supports for the lcdc support on the sama5d36ek
>>>>
>>>> arch/arm/boot/dts/sama5d36ek.dts | 27 +-
>>>> arch/arm/boot/dts/sama5d3_lcd.dtsi | 11 +
>>>> drivers/gpu/drm/Kconfig | 2 +
>>>> drivers/gpu/drm/Makefile | 1 +
>>>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>>>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>>>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>>>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>>>> 15 files changed, 3042 insertions(+), 1 deletion(-)
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>>>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>>>
>>>> --
>>>> 1.9.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel at lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>
>
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* Re: [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
2014-04-28 19:22 ` Boris BREZILLON
@ 2014-05-01 6:34 ` Jean-Jacques Hiblot
-1 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-05-01 6:34 UTC (permalink / raw)
To: Boris BREZILLON, nicolas.ferre, linux-arm-kernel, dri-devel
Cc: plagnioj, airlied, robdclark, linux-kernel
Hi Boris,
On 04/28/2014 09:22 PM, Boris BREZILLON wrote:
>
>
> Hi,
>
> This is a first review, from someone who's clearly not a DRM/KMS expert
> but who already thought about this specific driver :-).
>
> I strongly recommend that you wait for DRM/KMS maintainers and/or
> experienced developers reviews before modifying anything ;-).
>
>
> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
>> ---
>> drivers/gpu/drm/Kconfig | 2 +
>> drivers/gpu/drm/Makefile | 1 +
>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>> 13 files changed, 3005 insertions(+)
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>
>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
>> index 8e7fa4d..13fec638 100644
>> --- a/drivers/gpu/drm/Kconfig
>> +++ b/drivers/gpu/drm/Kconfig
>> @@ -190,6 +190,8 @@ source "drivers/gpu/drm/omapdrm/Kconfig"
>>
>> source "drivers/gpu/drm/tilcdc/Kconfig"
>>
>> +source "drivers/gpu/drm/atmel_hlcdc/Kconfig"
>> +
>> source "drivers/gpu/drm/qxl/Kconfig"
>>
>> source "drivers/gpu/drm/bochs/Kconfig"
>> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
>> index 292a79d..8245aa5 100644
>> --- a/drivers/gpu/drm/Makefile
>> +++ b/drivers/gpu/drm/Makefile
>> @@ -57,6 +57,7 @@ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
>> obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
>> obj-$(CONFIG_DRM_OMAP) += omapdrm/
>> obj-$(CONFIG_DRM_TILCDC) += tilcdc/
>> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc/
>> obj-$(CONFIG_DRM_QXL) += qxl/
>> obj-$(CONFIG_DRM_BOCHS) += bochs/
>> obj-$(CONFIG_DRM_MSM) += msm/
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/Kconfig b/drivers/gpu/drm/atmel_hlcdc/Kconfig
>> new file mode 100644
>> index 0000000..6ee5989
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/Kconfig
>> @@ -0,0 +1,13 @@
>> +config DRM_ATMEL_HLCDC
>> + tristate "DRM Support for ATMEL HLCDC Display Controller"
>> + depends on DRM && OF && ARM
>> + select DRM_KMS_HELPER
>> + select DRM_KMS_FB_HELPER
>> + select DRM_KMS_CMA_HELPER
>> + select DRM_GEM_CMA_HELPER
>> + select VIDEOMODE_HELPERS
>> + select BACKLIGHT_CLASS_DEVICE
>> + select BACKLIGHT_LCD_SUPPORT
>> + help
>> + Choose this option if you have an ATMEL SoC with HLCDC display
>> + controller, for example SAMA5D36EK.
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/Makefile b/drivers/gpu/drm/atmel_hlcdc/Makefile
>> new file mode 100644
>> index 0000000..4935c36
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/Makefile
>> @@ -0,0 +1,12 @@
>> +ccflags-y := -Iinclude/drm
>> +ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
>> + ccflags-y += -Werror
>> +endif
>> +
>> +atmel_hlcdc-y := \
>> + atmel_hlcdc_crtc.o \
>> + atmel_hlcdc_panel.o \
>> + atmel_hlcdc_backlight.o \
>> + atmel_hlcdc_drv.o
>> +
>> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc.o
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> new file mode 100644
>> index 0000000..8ed0767
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> @@ -0,0 +1,771 @@
>> +/*
>> + * Header file for AT91 High end LCD Controller
>> + *
>> + * Data structure and register user interface
>> + *
>> + * Copyright (C) 2010 Atmel Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + *
>> + */
>> +#ifndef __ATMEL_HLCD_H__
>> +#define __ATMEL_HLCD_H__
>> +
>> +/* Lcdc hardware registers */
>> +#define ATMEL_LCDC_LCDCFG0 0x0000
>> +#define LCDC_LCDCFG0_CLKPOL (0x1 << 0)
>> +#define LCDC_LCDCFG0_CLKSEL (0x1 << 2)
>> +#define LCDC_LCDCFG0_CLKPWMSEL (0x1 << 3)
>> +#define LCDC_LCDCFG0_CGDISBASE (0x1 << 8)
>> +#define LCDC_LCDCFG0_CGDISOVR1 (0x1 << 9)
>> +#define LCDC_LCDCFG0_CGDISOVR2 (0x1 << 10)
>> +#define LCDC_LCDCFG0_CGDISHEO (0x1 << 11)
>> +#define LCDC_LCDCFG0_CGDISHCR (0x1 << 12)
>> +#define LCDC_LCDCFG0_CGDISPP (0x1 << 13)
>> +#define LCDC_LCDCFG0_CLKDIV_OFFSET 16
>> +#define LCDC_LCDCFG0_CLKDIV (0xff << LCDC_LCDCFG0_CLKDIV_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG1 0x0004
>> +#define LCDC_LCDCFG1_HSPW_OFFSET 0
>> +#define LCDC_LCDCFG1_HSPW (0x3f << LCDC_LCDCFG1_HSPW_OFFSET)
>> +#define LCDC_LCDCFG1_VSPW_OFFSET 16
>> +#define LCDC_LCDCFG1_VSPW (0x3f << LCDC_LCDCFG1_VSPW_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG2 0x0008
>> +#define LCDC_LCDCFG2_VFPW_OFFSET 0
>> +#define LCDC_LCDCFG2_VFPW (0x3f << LCDC_LCDCFG2_VFPW_OFFSET)
>> +#define LCDC_LCDCFG2_VBPW_OFFSET 16
>> +#define LCDC_LCDCFG2_VBPW (0x3f << LCDC_LCDCFG2_VBPW_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG3 0x000C
>> +#define LCDC_LCDCFG3_HFPW_OFFSET 0
>> +#define LCDC_LCDCFG3_HFPW (0xff << LCDC_LCDCFG3_HFPW_OFFSET)
>> +#define LCDC2_LCDCFG3_HFPW (0x1ff << LCDC_LCDCFG3_HFPW_OFFSET)
>> +#define LCDC_LCDCFG3_HBPW_OFFSET 16
>> +#define LCDC_LCDCFG3_HBPW (0xff << LCDC_LCDCFG3_HBPW_OFFSET)
>> +#define LCDC2_LCDCFG3_HBPW (0x1ff << LCDC_LCDCFG3_HBPW_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG4 0x0010
>> +#define LCDC_LCDCFG4_PPL_OFFSET 0
>> +#define LCDC_LCDCFG4_PPL (0x7ff << LCDC_LCDCFG4_PPL_OFFSET)
>> +#define LCDC_LCDCFG4_RPF_OFFSET 16
>> +#define LCDC_LCDCFG4_RPF (0x7ff << LCDC_LCDCFG4_RPF_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG5 0x0014
>> +#define LCDC_LCDCFG5_HSPOL (0x1 << 0)
>> +#define LCDC_LCDCFG5_VSPOL (0x1 << 1)
>> +#define LCDC_LCDCFG5_VSPDLYS (0x1 << 2)
>> +#define LCDC_LCDCFG5_VSPDLYE (0x1 << 3)
>> +#define LCDC_LCDCFG5_DISPPOL (0x1 << 4)
>> +#define LCDC_LCDCFG5_SERIAL (0x1 << 5)
>> +#define LCDC_LCDCFG5_DITHER (0x1 << 6)
>> +#define LCDC_LCDCFG5_DISPDLY (0x1 << 7)
>> +#define LCDC_LCDCFG5_MODE_OFFSET 8
>> +#define LCDC_LCDCFG5_MODE (0x3 << LCDC_LCDCFG5_MODE_OFFSET)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_12BPP (0x0 << 8)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_16BPP (0x1 << 8)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_18BPP (0x2 << 8)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_24BPP (0x3 << 8)
>> +#define LCDC_LCDCFG5_PP (0x1 << 10)
>> +#define LCDC_LCDCFG5_VSPSU (0x1 << 12)
>> +#define LCDC_LCDCFG5_VSPHO (0x1 << 13)
>> +#define LCDC_LCDCFG5_GUARDTIME_OFFSET 16
>> +#define LCDC_LCDCFG5_GUARDTIME (0x1f << LCDC_LCDCFG5_GUARDTIME_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG6 0x0018
>> +#define LCDC_LCDCFG6_PWMPS_OFFSET 0
>> +#define LCDC_LCDCFG6_PWMPS (0x7 << LCDC_LCDCFG6_PWMPS_OFFSET)
>> +#define LCDC_LCDCFG6_PWMPOL (0x1 << 4)
>> +#define LCDC_LCDCFG6_PWMCVAL_OFFSET 8
>> +#define LCDC_LCDCFG6_PWMCVAL (0xff << LCDC_LCDCFG6_PWMCVAL_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDEN 0x0020
>> +#define LCDC_LCDEN_CLKEN (0x1 << 0)
>> +#define LCDC_LCDEN_SYNCEN (0x1 << 1)
>> +#define LCDC_LCDEN_DISPEN (0x1 << 2)
>> +#define LCDC_LCDEN_PWMEN (0x1 << 3)
>> +
>> +#define ATMEL_LCDC_LCDDIS 0x0024
>> +#define LCDC_LCDDIS_CLKDIS (0x1 << 0)
>> +#define LCDC_LCDDIS_SYNCDIS (0x1 << 1)
>> +#define LCDC_LCDDIS_DISPDIS (0x1 << 2)
>> +#define LCDC_LCDDIS_PWMDIS (0x1 << 3)
>> +#define LCDC_LCDDIS_CLKRST (0x1 << 8)
>> +#define LCDC_LCDDIS_SYNCRST (0x1 << 9)
>> +#define LCDC_LCDDIS_DISPRST (0x1 << 10)
>> +#define LCDC_LCDDIS_PWMRST (0x1 << 11)
>> +
>> +#define ATMEL_LCDC_LCDSR 0x0028
>> +#define LCDC_LCDSR_CLKSTS (0x1 << 0)
>> +#define LCDC_LCDSR_LCDSTS (0x1 << 1)
>> +#define LCDC_LCDSR_DISPSTS (0x1 << 2)
>> +#define LCDC_LCDSR_PWMSTS (0x1 << 3)
>> +#define LCDC_LCDSR_SIPSTS (0x1 << 4)
>> +
>> +#define ATMEL_LCDC_LCDIER 0x002C
>> +#define LCDC_LCDIER_SOFIE (0x1 << 0)
>> +#define LCDC_LCDIER_DISIE (0x1 << 1)
>> +#define LCDC_LCDIER_DISPIE (0x1 << 2)
>> +#define LCDC_LCDIER_FIFOERRIE (0x1 << 4)
>> +#define LCDC_LCDIER_BASEIE (0x1 << 8)
>> +#define LCDC_LCDIER_OVR1IE (0x1 << 9)
>> +#define LCDC_LCDIER_OVR2IE (0x1 << 10)
>> +#define LCDC_LCDIER_HEOIE (0x1 << 11)
>> +#define LCDC_LCDIER_HCRIE (0x1 << 12)
>> +#define LCDC_LCDIER_PPIE (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_LCDIDR 0x0030
>> +#define LCDC_LCDIDR_SOFID (0x1 << 0)
>> +#define LCDC_LCDIDR_DISID (0x1 << 1)
>> +#define LCDC_LCDIDR_DISPID (0x1 << 2)
>> +#define LCDC_LCDIDR_FIFOERRID (0x1 << 4)
>> +#define LCDC_LCDIDR_BASEID (0x1 << 8)
>> +#define LCDC_LCDIDR_OVR1ID (0x1 << 9)
>> +#define LCDC_LCDIDR_OVR2ID (0x1 << 10)
>> +#define LCDC_LCDIDR_HEOID (0x1 << 11)
>> +#define LCDC_LCDIDR_HCRID (0x1 << 12)
>> +#define LCDC_LCDIDR_PPID (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_LCDIMR 0x0034
>> +#define LCDC_LCDIMR_SOFIM (0x1 << 0)
>> +#define LCDC_LCDIMR_DISIM (0x1 << 1)
>> +#define LCDC_LCDIMR_DISPIM (0x1 << 2)
>> +#define LCDC_LCDIMR_FIFOERRIM (0x1 << 4)
>> +#define LCDC_LCDIMR_BASEIM (0x1 << 8)
>> +#define LCDC_LCDIMR_OVR1IM (0x1 << 9)
>> +#define LCDC_LCDIMR_OVR2IM (0x1 << 10)
>> +#define LCDC_LCDIMR_HEOIM (0x1 << 11)
>> +#define LCDC_LCDIMR_HCRIM (0x1 << 12)
>> +#define LCDC_LCDIMR_PPIM (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_LCDISR 0x0038
>> +#define LCDC_LCDISR_SOF (0x1 << 0)
>> +#define LCDC_LCDISR_DIS (0x1 << 1)
>> +#define LCDC_LCDISR_DISP (0x1 << 2)
>> +#define LCDC_LCDISR_FIFOERR (0x1 << 4)
>> +#define LCDC_LCDISR_BASE (0x1 << 8)
>> +#define LCDC_LCDISR_OVR1 (0x1 << 9)
>> +#define LCDC_LCDISR_OVR2 (0x1 << 10)
>> +#define LCDC_LCDISR_HEO (0x1 << 11)
>> +#define LCDC_LCDISR_HCR (0x1 << 12)
>> +#define LCDC_LCDISR_PP (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_BASECHER 0x0040
>> +#define LCDC_BASECHER_CHEN (0x1 << 0)
>> +#define LCDC_BASECHER_UPDATEEN (0x1 << 1)
>> +#define LCDC_BASECHER_A2QEN (0x1 << 2)
>> +
>> +#define ATMEL_LCDC_BASECHDR 0x0044
>> +#define LCDC_BASECHDR_CHDIS (0x1 << 0)
>> +#define LCDC_BASECHDR_CHRST (0x1 << 8)
>> +
>> +#define ATMEL_LCDC_BASECHSR 0x0048
>> +#define LCDC_BASECHSR_CHSR (0x1 << 0)
>> +#define LCDC_BASECHSR_UPDATESR (0x1 << 1)
>> +#define LCDC_BASECHSR_A2QSR (0x1 << 2)
>> +
>> +#define ATMEL_LCDC_BASEIER 0x004C
>> +#define LCDC_BASEIER_DMA (0x1 << 2)
>> +#define LCDC_BASEIER_DSCR (0x1 << 3)
>> +#define LCDC_BASEIER_ADD (0x1 << 4)
>> +#define LCDC_BASEIER_DONE (0x1 << 5)
>> +#define LCDC_BASEIER_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEIDR 0x0050
>> +#define LCDC_BASEIDR_DMA (0x1 << 2)
>> +#define LCDC_BASEIDR_DSCR (0x1 << 3)
>> +#define LCDC_BASEIDR_ADD (0x1 << 4)
>> +#define LCDC_BASEIDR_DONE (0x1 << 5)
>> +#define LCDC_BASEIDR_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEIMR 0x0054
>> +#define LCDC_BASEIMR_DMA (0x1 << 2)
>> +#define LCDC_BASEIMR_DSCR (0x1 << 3)
>> +#define LCDC_BASEIMR_ADD (0x1 << 4)
>> +#define LCDC_BASEIMR_DONE (0x1 << 5)
>> +#define LCDC_BASEIMR_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEISR 0x0058
>> +#define LCDC_BASEISR_DMA (0x1 << 2)
>> +#define LCDC_BASEISR_DSCR (0x1 << 3)
>> +#define LCDC_BASEISR_ADD (0x1 << 4)
>> +#define LCDC_BASEISR_DONE (0x1 << 5)
>> +#define LCDC_BASEISR_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEHEAD 0x005C
>> +
>> +#define ATMEL_LCDC_BASEADDR 0x0060
>> +
>> +#define ATMEL_LCDC_BASECTRL 0x0064
>> +#define LCDC_BASECTRL_DFETCH (0x1 << 0)
>> +#define LCDC_BASECTRL_LFETCH (0x1 << 1)
>> +#define LCDC_BASECTRL_DMAIEN (0x1 << 2)
>> +#define LCDC_BASECTRL_DSCRIEN (0x1 << 3)
>> +#define LCDC_BASECTRL_ADDIEN (0x1 << 4)
>> +#define LCDC_BASECTRL_DONEIEN (0x1 << 5)
>> +
>> +#define ATMEL_LCDC_BASENEXT 0x0068
>> +
>> +#define ATMEL_LCDC_BASECFG0 0x006C
>> +#define LCDC_BASECFG0_SIF (0x1 << 0)
>> +#define LCDC_BASECFG0_BLEN_OFFSET 4
>> +#define LCDC_BASECFG0_BLEN (0x3 << LCDC_BASECFG0_BLEN_OFFSET)
>> +#define LCDC_BASECFG0_BLEN_AHB_SINGLE (0x0 << 4)
>> +#define LCDC_BASECFG0_BLEN_AHB_INCR4 (0x1 << 4)
>> +#define LCDC_BASECFG0_BLEN_AHB_INCR8 (0x2 << 4)
>> +#define LCDC_BASECFG0_BLEN_AHB_INCR16 (0x3 << 4)
>> +#define LCDC_BASECFG0_DLBO (0x1 << 8)
>> +
>> +#define ATMEL_LCDC_BASECFG1 0x0070
>> +#define LCDC_BASECFG1_CLUTEN (0x1 << 0)
>> +#define LCDC_BASECFG1_RGBMODE_OFFSET 4
>> +#define LCDC_BASECFG1_RGBMODE (0xf << LCDC_BASECFG1_RGBMODE_OFFSET)
>> +#define LCDC_BASECFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
>> +#define LCDC_BASECFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
>> +#define LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
>> +#define LCDC_BASECFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
>> +#define LCDC_BASECFG1_CLUTMODE_OFFSET 8
>> +#define LCDC_BASECFG1_CLUTMODE (0x3 << LCDC_BASECFG1_CLUTMODE_OFFSET)
>> +#define LCDC_BASECFG1_CLUTMODE_1BPP (0x0 << 8)
>> +#define LCDC_BASECFG1_CLUTMODE_2BPP (0x1 << 8)
>> +#define LCDC_BASECFG1_CLUTMODE_4BPP (0x2 << 8)
>> +#define LCDC_BASECFG1_CLUTMODE_8BPP (0x3 << 8)
>> +
>> +#define ATMEL_LCDC_BASECFG2 0x0074
>> +
>> +#define ATMEL_LCDC_BASECFG3 0x0078
>> +#define LCDC_BASECFG3_BDEF_OFFSET 0
>> +#define LCDC_BASECFG3_BDEF (0xff << LCDC_BASECFG3_BDEF_OFFSET)
>> +#define LCDC_BASECFG3_GDEF_OFFSET 8
>> +#define LCDC_BASECFG3_GDEF (0xff << LCDC_BASECFG3_GDEF_OFFSET)
>> +#define LCDC_BASECFG3_RDEF_OFFSET 16
>> +#define LCDC_BASECFG3_RDEF (0xff << LCDC_BASECFG3_RDEF_OFFSET)
>> +
>> +#define ATMEL_LCDC_BASECFG4 0x007C
>> +#define LCDC_BASECFG4_DMA (0x1 << 8)
>> +#define LCDC_BASECFG4_REP (0x1 << 9)
>> +#define LCDC_BASECFG4_DISCEN (0x1 << 11)
>> +
>> +#define ATMEL_LCDC_BASECFG5 0x0080
>> +#define LCDC_BASECFG5_DISCXPOS_OFFSET 0
>> +#define LCDC_BASECFG5_DISCXPOS (0x7ff << LCDC_BASECFG5_DISCXPOS_OFFSET)
>> +#define LCDC_BASECFG5_DISCYPOS_OFFSET 16
>> +#define LCDC_BASECFG5_DISCYPOS (0x7ff << LCDC_BASECFG5_DISCYPOS_OFFSET)
>> +
>> +#define ATMEL_LCDC_BASECFG6 0x0084
>> +#define LCDC_BASECFG6_DISCXSIZE_OFFSET 0
>> +#define LCDC_BASECFG6_DISCXSIZE (0x7ff << LCDC_BASECFG6_DISCXSIZE_OFFSET)
>> +#define LCDC_BASECFG6_DISCYSIZE_OFFSET 16
>> +#define LCDC_BASECFG6_DISCYSIZE (0x7ff << LCDC_BASECFG6_DISCYSIZE_OFFSET)
>> +
>
> All layers use pretty much the same layout (IER,IDR, IMR, HEAD, ADDR, ...).
> Maybe you could define something like this:
>
> ATMEL_LCDC_CHER(layer) (layer->reg_offset + (0x0))
> ATMEL_LCDC_CHDR(layer) (layer->reg_offset + (0x4))
> ...
>
> with each layer storing its own reg_offset.
>
> IMHO, this would reduce the MACRO list size and thus make this file more
> readable.
>
Sure, it would be easier. For this RFC I used the header provided by
ATMEL with no modification, but it'll probably need a clean-up pass.
>
>> +#define ATMEL_LCDC_HEOCHER 0x0280
>> +#define ATMEL_LCDC2_HEOCHER 0x0340
>> +#define LCDC_HEOCHER_CHEN (0x1 << 0)
>> +#define LCDC_HEOCHER_UPDATEEN (0x1 << 1)
>> +#define LCDC_HEOCHER_A2QEN (0x1 << 2)
>
> [...]
>
>> +#define ATMEL_LCDC_HCRCLUT 0x1400
>> +#define ATMEL_LCDC2_HCRCLUT 0x1600
>> +#define LCDC_HCRCLUT_BCLUT_OFFSET 0
>> +#define LCDC_HCRCLUT_BCLUT (0xff << LCDC_HCRCLUT_BCLUT_OFFSET)
>> +#define LCDC_HCRCLUT_GCLUT_OFFSET 8
>> +#define LCDC_HCRCLUT_GCLUT (0xff << LCDC_HCRCLUT_GCLUT_OFFSET)
>> +#define LCDC_HCRCLUT_RCLUT_OFFSET 16
>> +#define LCDC_HCRCLUT_RCLUT (0xff << LCDC_HCRCLUT_RCLUT_OFFSET)
>> +#define LCDC_HCRCLUT_ACLUT_OFFSET 24
>> +#define LCDC_HCRCLUT_ACLUT (0xff << LCDC_HCRCLUT_ACLUT_OFFSET)
>> +
>> +/* Base layer CLUT */
>> +#define ATMEL_HLCDC_LUT 0x0400
>> +
>> +
>> +static inline void hlcdc_write(struct drm_device *dev, u32 reg, u32 data)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + iowrite32(data, priv->mmio + reg);
>> +}
>> +
>> +static inline u32 hlcdc_read(struct drm_device *dev, u32 reg)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + return ioread32(priv->mmio + reg);
>> +}
>> +
>> +#endif /* __ATMEL_HLCDC4_H__ */
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> new file mode 100644
>> index 0000000..143ba72
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> @@ -0,0 +1,92 @@
>> +/*
>> + * atmel_hlcdc_backlight.c -- Backlight driver for the atmel HLCDC controller
>> + *
>> + * Copyright (C) 2014 Traphandler
>> + *
>> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include <linux/backlight.h>
>> +
>> +#include "atmel_hlcdc_drv.h"
>> +#include "atmel_hlcdc.h"
>> +
>> +#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
>> +
>> +
>> +static int get_brightness(struct backlight_device *backlight)
>> +{
>> + struct drm_device *dev = bl_get_data(backlight);
>> +
>> + return (hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & LCDC_LCDCFG6_PWMCVAL)
>> + >> LCDC_LCDCFG6_PWMCVAL_OFFSET;
>> +}
>> +
>> +static int update_status(struct backlight_device *backlight)
>> +{
>> + struct drm_device *dev = bl_get_data(backlight);
>> + int brightness = backlight->props.brightness;
>> + u32 reg;
>> +
>> + if (backlight->props.power != FB_BLANK_UNBLANK ||
>> + backlight->props.state & BL_CORE_SUSPENDED)
>> + brightness = 0;
>> +
>> + reg = hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & ~LCDC_LCDCFG6_PWMCVAL;
>> + reg |= brightness << LCDC_LCDCFG6_PWMCVAL_OFFSET;
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, reg);
>> + DBG("new brightness is : %d\n", get_brightness(backlight));
>> + return 0;
>> +}
>> +
>> +
>> +
>> +static const struct backlight_ops atmel_drm_backlight_ops = {
>> + .options = BL_CORE_SUSPENDRESUME,
>> + .update_status = update_status,
>> + .get_brightness = get_brightness,
>> +};
>> +
>> +int atmel_drm_backlight_init(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct backlight_device *backlight;
>> +
>> + backlight = backlight_device_register("backlight", dev->dev, dev,
>> + &atmel_drm_backlight_ops , NULL);
>> + if (IS_ERR(backlight)) {
>> + dev_err(dev->dev, "unable to register backlight device: %ld\n",
>> + PTR_ERR(backlight));
>> + return PTR_ERR(backlight);
>> + }
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
>> + (ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
>> +
>> + backlight->props.max_brightness = 0xFF;
>> + backlight->props.brightness = get_brightness(backlight);
>> + backlight->props.power = FB_BLANK_UNBLANK;
>> + backlight_update_status(backlight);
>> +
>> + priv->backlight = backlight;
>> +
>> + return 0;
>> +}
>> +
>> +void atmel_drm_backlight_exit(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> +
>> + backlight_device_unregister(priv->backlight);
>> +}
>
> Atmel's datasheet describe it as a PWM (that will most likely be used as
> a backlight, but still :-)).
> How about implementing a pwm chip and then use the backlight-pwm driver
> to expose a backlight device based on this PWM device ?
I thought about this when writing this part. I wondered if this PWM will
ever be used for something else than backlight control as the ATMEL's
chip already have several PWM outputs that are more advanced than this
one. It's more straightforward and the amount of code is less.
>
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> new file mode 100644
>> index 0000000..6a99101
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> @@ -0,0 +1,25 @@
>> +/*
>> + * Copyright (C) 2014 Traphandler
>> + *
>> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __ATMEL_HLCDC_BACKLIGHT_H__
>> +#define __ATMEL_HLCDC_BACKLIGHT_H__
>> +
>> +int atmel_drm_backlight_init(struct drm_device *dev);
>> +void atmel_drm_backlight_exit(struct drm_device *dev);
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> new file mode 100644
>> index 0000000..649fa19
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> @@ -0,0 +1,702 @@
>> +/*
>> + * Copyright (C) 2014 Traphandler
>> + *
>> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
>> + *
>> + * Base on the tilcdc driver
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include "drm_flip_work.h"
>> +
>> +#include "atmel_hlcdc_drv.h"
>> +#include "atmel_hlcdc.h"
>> +#include "atmel_hlcdc_ovl.h"
>> +
>> +#define MAX(x, y) ((x) > (y) ? (x) : (y))
>> +
>> +
>> +struct atmel_hlcd_dma_desc {
>> + u32 address;
>
> I think you should use dma_addr_t instead of u32.
>
>> + u32 control;
>> + u32 next;
>
> ditto
>
>> + u32 dummy; /* for 64-bit alignment */
>> +};
>> +
>> +enum {
>> + DMA_BASE = 0,
>> + DMA_OVR_1,
>> + DMA_OVR_2,
>> + DMA_HEO,
>> + DMA_HCR,
>> + DMA_PP,
>> + DMA_MAX
>> +};
>> +
>> +struct atmel_hlcdc_crtc {
>> + struct drm_crtc base;
>> + uint32_t dirty;
>> + dma_addr_t start, end;
>> + struct drm_pending_vblank_event *event;
>> + int dpms;
>> +
>> + struct atmel_hlcd_dma_desc *dma_descs[DMA_MAX];
>> + dma_addr_t dma_descs_phys[DMA_MAX];
>> +
>> + /* fb currently set to scanout 0/1: */
>> + struct drm_framebuffer *fb;
>> +
>> + /* for deferred fb unref's: */
>> + struct drm_flip_work unref_work;
>> +#ifdef USE_LUT
>> + u8 lut_r[256], lut_g[256], lut_b[256];
>> +#endif
>> +};
>> +#define to_atmel_hlcdc_crtc(x) container_of(x, struct atmel_hlcdc_crtc, base)
>> +
>> +static void unref_worker(struct drm_flip_work *work, void *val)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc =
>> + container_of(work, struct atmel_hlcdc_crtc, unref_work);
>> + struct drm_device *dev = atmel_hlcdc_crtc->base.dev;
>> +
>> + mutex_lock(&dev->mode_config.mutex);
>> + drm_framebuffer_unreference(val);
>> + mutex_unlock(&dev->mode_config.mutex);
>> +}
>> +
>> +static void update_scanout(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct drm_framebuffer *fb = crtc->fb;
>> +
>> + struct drm_gem_cma_object *gem;
>> + struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
>> + unsigned int depth, bpp;
>> + dma_addr_t start;
>> + dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
>> +
>> + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
>> + gem = drm_fb_cma_get_gem_obj(fb, 0);
>> +
>> + start = gem->paddr + fb->offsets[0] +
>> + (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
>> +
>> + if (hlcdc_crtc->fb != fb) {
>> + struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
>> + drm_framebuffer_reference(fb);
>> + hlcdc_crtc->fb = fb;
>> + if (oldfb) {
>> + drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
>> + drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
>> + }
>> + }
>> +
>> + if (desc->address != start) {
>> + desc->address = start;
>> + desc->next = desc_phys;
>> + desc->control = LCDC_OVRCTRL_DFETCH;
>> + }
>> +
>> + if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
>> + hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
>
> I read the datasheet several times, and wonder how this could work.
>
> Here's what I understood:
>
> If you want to initiate a DMA transfer and the layer channel is not
> enabled yet, you have to write ATMEL_LCDC_BASEADDR, ATMEL_LCDC_BASENEXT
> and ATMEL_LCDC_BASECTRL registers, and then write the CHEN bit in the
> CHER register.
> If the layer channel is already enabled and a DMA transfer is in
> progress, you'd better use the HEAD pointer and write the A2QEN bit.
>
> Here, you're only writing the NEXT pointer, and AFAICT this can only
> work if the layer has already been enabled (by the bootloader for example).
OK. I'll put back the complete init of the DMA. This should probably be
changed to be more genreic so that other layers can also use this DMA
initialization.
>
>> + hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
>> + }
>> +}
>> +
>> +static void start(struct drm_crtc *crtc)
>> +{
>> + struct drm_device *dev = crtc->dev;
>> +
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
>> + cpu_relax();
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
>> + cpu_relax();
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
>> + cpu_relax();
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
>> + cpu_relax();
>> +}
>> +
>> +static void stop(struct drm_crtc *crtc)
>> +{
>> + struct drm_device *dev = crtc->dev;
>> +
>> + /* Disable DISP signal */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
>> + cpu_relax();
>> + /* Disable synchronization */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
>> + cpu_relax();
>> + /* Disable pixel clock */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
>> + cpu_relax();
>> + /* Disable PWM */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
>> + cpu_relax();
>> +}
>> +
>> +static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> +
>> + WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
>> +
>> + drm_crtc_cleanup(crtc);
>> + drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
>> +
>> + if (atmel_hlcdc_crtc->dma_descs[0])
>> + dma_free_writecombine(dev->dev,
>> + sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
>> + atmel_hlcdc_crtc->dma_descs[0],
>> + atmel_hlcdc_crtc->dma_descs_phys[0]);
>> + kfree(atmel_hlcdc_crtc);
>> +}
>> +
>> +static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
>> + struct drm_framebuffer *fb,
>> + struct drm_pending_vblank_event *event,
>> + uint32_t page_flip_flags)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> +
>> + if (atmel_hlcdc_crtc->event) {
>> + dev_err(dev->dev, "already pending page flip!\n");
>> + return -EBUSY;
>> + }
>> +
>> + crtc->fb = fb;
>> + atmel_hlcdc_crtc->event = event;
>> + update_scanout(crtc);
>> + return 0;
>> +}
>> +
>> +static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> +
>> + /* we really only care about on or off: */
>> + if (mode != DRM_MODE_DPMS_ON)
>> + mode = DRM_MODE_DPMS_OFF;
>> +
>> + if (atmel_hlcdc_crtc->dpms == mode)
>> + return;
>> +
>> + atmel_hlcdc_crtc->dpms = mode;
>> +
>> + pm_runtime_get_sync(dev->dev);
>> +
>> + if (mode == DRM_MODE_DPMS_ON) {
>> + pm_runtime_forbid(dev->dev);
>> + start(crtc);
>> + } else {
>> + stop(crtc);
>> + pm_runtime_allow(dev->dev);
>> + }
>> +
>> + pm_runtime_put_sync(dev->dev);
>> +}
>> +
>> +static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
>> + const struct drm_display_mode *mode,
>> + struct drm_display_mode *adjusted_mode)
>> +{
>> + return true;
>> +}
>> +
>> +static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
>> +{
>> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
>> +}
>> +
>> +static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
>> +{
>> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
>> +}
>> +
>> +static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
>> +{
>> + u32 value = 0;
>> +
>> + switch (depth) {
>> + case 1:
>> + value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 2:
>> + value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 4:
>> + value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 8:
>> + value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 12:
>> + value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
>> + break;
>> + case 16:
>> + value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
>> + break;
>> + case 18:
>> + value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
>> + break;
>> + case 24:
>> + value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
>> + break;
>> + case 32:
>> + value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
>> + break;
>> + default:
>> + dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
>> + depth, bpp);
>> + break;
>> + }
>> +
>> + return value;
>> +}
>> +
>> +
>> +void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
>> +{
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + unsigned long value;
>> + unsigned long clk_value_khz;
>> +
>> + if (clock == 0)
>> + clock = crtc->mode.clock;
>> +
>> + pm_runtime_get_sync(dev->dev);
>> +
>> + clk_value_khz = clk_get_rate(priv->clk) / 1000;
>> +
>> + value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
>> +
>> + if (value < 1) {
>> + dev_notice(dev->dev, "using system clock as pixel clock\n");
>> + value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
>> + } else {
>> + dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
>> + clk_value_khz / value);
>> + value = value - 2;
>> + dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
>> + value);
>> + value = LCDC_LCDCFG0_CLKPWMSEL |
>> + (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
>> + | LCDC_LCDCFG0_CGDISBASE;
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
>> + }
>> +
>> + pm_runtime_put_sync(dev->dev);
>> +}
>> +
>> +static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
>> + struct drm_display_mode *mode,
>> + struct drm_display_mode *adjusted_mode,
>> + int x, int y,
>> + struct drm_framebuffer *old_fb)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + int dpms = atmel_hlcdc_crtc->dpms;
>> + int hbp, hfp, hsw, vbp, vfp, vsw;
>> + unsigned int depth, bpp;
>> + unsigned long value;
>> + int ret;
>> +
>> + ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
>> + if (WARN_ON(ret))
>> + return ret;
>> +
>> + pm_runtime_get_sync(dev->dev);
>> +
>> + if (dpms == DRM_MODE_DPMS_ON)
>> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
>> +
>> + dev_dbg(dev->dev, "%s:\n", __func__);
>> +
>> +
>> + /* Set pixel clock */
>> + atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
>> +
>> + /* Initialize control register 5 */
>> + value = priv->default_lcdcfg5;
>> + value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
>> + | LCDC_LCDCFG5_DISPDLY
>> + | LCDC_LCDCFG5_VSPDLYS;
>> +
>> + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
>> + value |= LCDC_LCDCFG5_HSPOL;
>> +
>> + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
>> + value |= LCDC_LCDCFG5_VSPOL;
>> +
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
>> +
>> +
>> + /* Configure timings: */
>> + hbp = MAX(mode->htotal - mode->hsync_end, 1);
>> + hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
>> + hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
>> + vbp = MAX(mode->vtotal - mode->vsync_end, 0);
>> + vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
>> + vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
>> +
>> + DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
>> + mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
>> +
>> + /* Vertical & Horizontal Timing */
>> + value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
>> + value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
>> +
>> + value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
>> + value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
>> +
>> + value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
>> + value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
>> +
>> + /* Display size */
>> + value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
>> + value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
>> +
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
>> + LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
>> +
>> + drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
>> + atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
>> +
>> + /* Disable all interrupts */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDIDR, ~0UL);
>> + hlcdc_write(dev, ATMEL_LCDC_BASEIDR, ~0UL);
>> + /* Enable BASE LAYER overflow interrupts */
>> + hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
>> + /* Enable FIFO error interrupt and the global BASE LAYER interrupt*/
>> + hlcdc_write(dev, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
>> + LCDC_LCDIER_BASEIE);
>> +
>> +
>> + update_scanout(crtc);
>> +
>> + atmel_hlcdc_crtc_dpms(crtc, dpms);
>> +
>> + pm_runtime_put_sync(dev->dev);
>> + return 0;
>> +}
>> +
>> +static int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
>> + struct drm_framebuffer *old_fb)
>> +{
>> + update_scanout(crtc);
>> + return 0;
>> +}
>> +
>> +#ifdef USE_LUT
>> +static void atmel_hlcdc_crtc_load_lut(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + int i;
>> +
>> + if (!crtc->enabled)
>> + return;
>> +
>> + for (i = 0; i < 256; i++)
>> + hlcdc_write(dev, ATMEL_HLCDC_LUT + (i*4),
>> + (atmel_hlcdc_crtc->lut_r[i] << 16) |
>> + (atmel_hlcdc_crtc->lut_g[i] << 8) |
>> + (atmel_hlcdc_crtc->lut_b[i] << 0));
>> +}
>> +void atmel_hlcdc_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
>> + u16 blue, int regno)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> +
>> + atmel_hlcdc_crtc->lut_r[regno] = red;
>> + atmel_hlcdc_crtc->lut_g[regno] = green;
>> + atmel_hlcdc_crtc->lut_b[regno] = blue;
>> +}
>> +
>> +void atmel_hlcdc_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
>> + u16 *blue, int regno)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> +
>> + *red = atmel_hlcdc_crtc->lut_r[regno];
>> + *green = atmel_hlcdc_crtc->lut_g[regno];
>> + *blue = atmel_hlcdc_crtc->lut_b[regno];
>> +}
>> +#endif
>> +
>> +static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
>> + .destroy = atmel_hlcdc_crtc_destroy,
>> + .set_config = drm_crtc_helper_set_config,
>> + .page_flip = atmel_hlcdc_crtc_page_flip,
>> +};
>> +
>> +static const struct drm_crtc_helper_funcs atmel_hlcdc_crtc_helper_funcs = {
>> + .dpms = atmel_hlcdc_crtc_dpms,
>> + .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
>> + .prepare = atmel_hlcdc_crtc_prepare,
>> + .commit = atmel_hlcdc_crtc_commit,
>> + .mode_set = atmel_hlcdc_crtc_mode_set,
>> + .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
>>
>> +/*
>> + * DRM operations:
>> + */
>> +
>> +static int atmel_hlcdc_unload(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct atmel_hlcdc_module *mod, *cur;
>> +
>> + drm_kms_helper_poll_fini(dev);
>> + drm_mode_config_cleanup(dev);
>> + drm_vblank_cleanup(dev);
>> +
>> + pm_runtime_get_sync(dev->dev);
>> + drm_irq_uninstall(dev);
>> + pm_runtime_put_sync(dev->dev);
>> +
>> +#ifdef CONFIG_CPU_FREQ
>> + cpufreq_unregister_notifier(&priv->freq_transition,
>> + CPUFREQ_TRANSITION_NOTIFIER);
>> +#endif
>> +
>> + if (priv->clk)
>> + clk_put(priv->clk);
>> +
>> + if (priv->mmio)
>> + iounmap(priv->mmio);
>> +
>> + flush_workqueue(priv->wq);
>> + destroy_workqueue(priv->wq);
>> +
>> + dev->dev_private = NULL;
>> +
>> + pm_runtime_disable(dev->dev);
>> +
>> + list_for_each_entry_safe(mod, cur, &module_list, list) {
>> + DBG("destroying module: %s", mod->name);
>> + mod->funcs->destroy(mod);
>> + }
>> +
>> + kfree(priv);
>> +
>> + return 0;
>> +}
>> +
>> +static int atmel_hlcdc_load(struct drm_device *dev, unsigned long flags)
>> +{
>> + struct platform_device *pdev = dev->platformdev;
>> + struct device_node *node = pdev->dev.of_node;
>> + struct atmel_hlcdc_drm_private *priv;
>> + struct atmel_hlcdc_module *mod;
>> + struct resource *res;
>> + u32 bpp = 0;
>> + int ret;
>> +
>> + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
>> + if (!priv) {
>> + dev_err(dev->dev, "failed to allocate private data\n");
>> + return -ENOMEM;
>> + }
>> +
>> + dev->dev_private = priv;
>> +
>> + priv->wq = alloc_ordered_workqueue("atmel_hlcdc", 0);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res) {
>> + dev_err(dev->dev, "failed to get memory resource\n");
>> + ret = -EINVAL;
>> + goto fail;
>> + }
>> +
>> + priv->mmio = ioremap_nocache(res->start, resource_size(res));
>> + if (!priv->mmio) {
>> + dev_err(dev->dev, "failed to ioremap\n");
>> + ret = -ENOMEM;
>> + goto fail;
>> + }
>> +
>> + priv->clk = clk_get(dev->dev, "lcdc_clk");
> Make use of devm functions whenever possible.
>> + if (IS_ERR(priv->clk)) {
>> + dev_err(dev->dev, "failed to get lcd clock\n");
>> + ret = -ENODEV;
>> + goto fail;
>> + }
>> + clk_prepare_enable(priv->clk);
>> +
>> + priv->bus_clk = clk_get(dev->dev, "bus_clk");
>> + if (IS_ERR(priv->bus_clk)) {
>> + dev_dbg(dev->dev, "no bus clock defined.\n");
>> + priv->bus_clk = NULL;
>> + }
>> + if (priv->bus_clk)
>> + clk_prepare_enable(priv->bus_clk);
>> +
>> +#ifdef CONFIG_CPU_FREQ
>> + priv->lcd_fck_rate = clk_get_rate(priv->clk);
>> + priv->freq_transition.notifier_call = cpufreq_transition;
>> + ret = cpufreq_register_notifier(&priv->freq_transition,
>> + CPUFREQ_TRANSITION_NOTIFIER);
>> + if (ret) {
>> + dev_err(dev->dev, "failed to register cpufreq notifier\n");
>> + goto fail;
>> + }
>> +#endif
>> +
>> + if (of_property_read_u32(node, "default-lcdcfg5",
>> + &priv->default_lcdcfg5))
>> + priv->default_lcdcfg5 = LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
>> +
>> + DBG("LCDCFG5 default value 0x%x", priv->default_lcdcfg5);
>> +
>> + if (of_property_read_u32(node, "guard-time", &priv->guard_time))
>> + priv->guard_time = 9;
>> +
>> + DBG("Guard time Value 0x%x", priv->guard_time);
>> +
>> + if (of_property_read_u32(node, "hlcdc,max-pixelclock",
>> + &priv->max_pixelclock))
>> + priv->max_pixelclock = ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK;
>> +
>> + DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
>> +
>> + pm_runtime_enable(dev->dev);
>> +
>> + ret = modeset_init(dev);
>> + if (ret < 0) {
>> + dev_err(dev->dev, "failed to initialize mode setting\n");
>> + goto fail;
>> + }
>> +
>> + ret = drm_vblank_init(dev, 1);
>> + if (ret < 0) {
>> + dev_err(dev->dev, "failed to initialize vblank\n");
>> + goto fail;
>> + }
>> +
>> + pm_runtime_get_sync(dev->dev);
>> + ret = drm_irq_install(dev);
>> + pm_runtime_put_sync(dev->dev);
>> + if (ret < 0) {
>> + dev_err(dev->dev, "failed to install IRQ handler\n");
>> + goto fail;
>> + }
>> +
>> + platform_set_drvdata(pdev, dev);
>> +
>> + list_for_each_entry(mod, &module_list, list) {
>> + DBG("%s: preferred_bpp: %d", mod->name, mod->preferred_bpp);
>> + bpp = mod->preferred_bpp;
>> + if (bpp > 0)
>> + break;
>> + }
>> +
>> + priv->fbdev = drm_fbdev_cma_init(dev, bpp,
>> + dev->mode_config.num_crtc,
>> + dev->mode_config.num_connector);
>> + drm_kms_helper_poll_init(dev);
>> +
>> + return 0;
>> +
>> +fail:
>> + atmel_hlcdc_unload(dev);
>> + return ret;
>> +}
>> +
>> +static void atmel_hlcdc_preclose(struct drm_device *dev, struct drm_file *file)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + atmel_hlcdc_crtc_cancel_page_flip(priv->crtc, file);
>> +}
>> +
>> +static void atmel_hlcdc_lastclose(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + drm_fbdev_cma_restore_mode(priv->fbdev);
>> +}
>> +
> [...]
>> +/*
>> + * Connector:
>> + */
>> +
>> +struct panel_connector {
>> + struct drm_connector base;
>> +
>> + struct drm_encoder *encoder; /* our connected encoder */
>> + struct panel_module *mod;
>> +};
>> +#define to_panel_connector(x) container_of(x, struct panel_connector, base)
>> +
>> +
>> +static void panel_connector_destroy(struct drm_connector *connector)
>> +{
>> + struct panel_connector *panel_con = to_panel_connector(connector);
>> + drm_connector_cleanup(connector);
>> + kfree(panel_con);
>> +}
>> +
>> +static enum drm_connector_status panel_connector_detect(
>> + struct drm_connector *connector,
>>
>> +static struct of_device_id panel_of_match[];
>> +
>> +static int panel_probe(struct platform_device *pdev)
>> +{
>> + struct device_node *node = pdev->dev.of_node;
>> + struct panel_module *panel_mod;
>> + struct atmel_hlcdc_module *mod;
>> + struct pinctrl *pinctrl;
>> + int ret = -EINVAL;
>> +
>> + /* bail out early if no DT data: */
>> + if (!node) {
>> + dev_err(&pdev->dev, "device-tree data is missing\n");
>> + return -ENXIO;
>> + }
>> + panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
>> + if (!panel_mod)
>> + return -ENOMEM;
>> +
>> + mod = &panel_mod->base;
>> +
>> + pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
>> + if (IS_ERR(pinctrl))
>> + dev_warn(&pdev->dev, "pins are not configured\n");
>> +
>> + panel_mod->timings = of_get_display_timings(node);
>> + if (!panel_mod->timings) {
>> + dev_err(&pdev->dev, "could not get panel timings\n");
>> + goto fail;
>> + }
>> +
>> + if (of_get_panel_info(&pdev->dev, node, panel_mod) < 0) {
>> + dev_err(&pdev->dev, "could not get panel info\n");
>> + goto fail;
>> + }
>> +
>> + mod->preferred_bpp = panel_mod->preferred_bpp;
>> +
>> + panel_mod->backlight = of_find_backlight_by_node(node);
>> + if (panel_mod->backlight)
>> + dev_info(&pdev->dev, "found backlight\n");
>> +
>> +
>> + atmel_hlcdc_module_init(mod, "panel", &panel_module_ops);
>> +
>> + return 0;
>> +
>> +fail:
>> + panel_destroy(mod);
>> + return ret;
>> +}
>> +
>> +static int panel_remove(struct platform_device *pdev)
>> +{
>> + return 0;
>> +}
>> +
>> +static struct of_device_id panel_of_match[] = {
>> + { .compatible = "atmel,hlcdc,panel", },
>> + { },
>> +};
>> +
>> +struct platform_driver panel_driver = {
>> + .probe = panel_probe,
>> + .remove = panel_remove,
>> + .driver = {
>> + .owner = THIS_MODULE,
>> + .name = "panel",
>> + .of_match_table = panel_of_match,
>> + },
>> +};
>> +
>> +int __init atmel_hlcdc_panel_init(void)
>> +{
>> + return platform_driver_register(&panel_driver);
>> +}
>> +
>> +void __exit atmel_hlcdc_panel_fini(void)
>> +{
>> + platform_driver_unregister(&panel_driver);
>> +}
>
> Wouldn't it make more sense to use the drm_panel infrastructure (and the
> simple-panel driver) instead of implementing a new panel layer for the
> HLCDC driver ?
> You'd still have to implement the hlcdc glue to use an LCD panel (to
> convert panel timings to hlcdc timings), but at least you'll reuse the
> common DT bindings.
I actually did this when I did a mockup for the at91sam9261ek and I
think that's definitely the way to go. I just did not include this for
the RFC to keep it small.
>
> This is all for the moment, but I definitely need to dig more into the
> code for a better review :-).
>
> Best Regards,
>
> Boris
>
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>> new file mode 100644
>> index 0000000..0f66169
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>> @@ -0,0 +1,28 @@
>> +/*
>> + * Copyright (C) 2014 Traphandler
>> + * Copyright (C) 2012 Texas Instruments
>> + *
>> + * Base on the tilcdc panel driver
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __ATMEL_HLCDC_PANEL_H__
>> +#define __ATMEL_HLCDC_PANEL_H__
>> +
>> +/* sub-module for generic lcd panel output */
>> +
>> +int atmel_hlcdc_panel_init(void);
>> +void atmel_hlcdc_panel_fini(void);
>> +
>> +#endif /* __ATMEL_HLCDC_PANEL_H__ */
>
^ permalink raw reply [flat|nested] 41+ messages in thread
* [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller
@ 2014-05-01 6:34 ` Jean-Jacques Hiblot
0 siblings, 0 replies; 41+ messages in thread
From: Jean-Jacques Hiblot @ 2014-05-01 6:34 UTC (permalink / raw)
To: linux-arm-kernel
Hi Boris,
On 04/28/2014 09:22 PM, Boris BREZILLON wrote:
>
>
> Hi,
>
> This is a first review, from someone who's clearly not a DRM/KMS expert
> but who already thought about this specific driver :-).
>
> I strongly recommend that you wait for DRM/KMS maintainers and/or
> experienced developers reviews before modifying anything ;-).
>
>
> On 18/04/2014 11:45, Jean-Jacques Hiblot wrote:
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
>> ---
>> drivers/gpu/drm/Kconfig | 2 +
>> drivers/gpu/drm/Makefile | 1 +
>> drivers/gpu/drm/atmel_hlcdc/Kconfig | 13 +
>> drivers/gpu/drm/atmel_hlcdc/Makefile | 12 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h | 771 +++++++++++++++++++++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c | 92 +++
>> .../gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h | 25 +
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c | 702 +++++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c | 586 ++++++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h | 124 ++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h | 190 +++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c | 459 ++++++++++++
>> drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h | 28 +
>> 13 files changed, 3005 insertions(+)
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Kconfig
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/Makefile
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_drv.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_ovl.h
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.c
>> create mode 100644 drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>>
>> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
>> index 8e7fa4d..13fec638 100644
>> --- a/drivers/gpu/drm/Kconfig
>> +++ b/drivers/gpu/drm/Kconfig
>> @@ -190,6 +190,8 @@ source "drivers/gpu/drm/omapdrm/Kconfig"
>>
>> source "drivers/gpu/drm/tilcdc/Kconfig"
>>
>> +source "drivers/gpu/drm/atmel_hlcdc/Kconfig"
>> +
>> source "drivers/gpu/drm/qxl/Kconfig"
>>
>> source "drivers/gpu/drm/bochs/Kconfig"
>> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
>> index 292a79d..8245aa5 100644
>> --- a/drivers/gpu/drm/Makefile
>> +++ b/drivers/gpu/drm/Makefile
>> @@ -57,6 +57,7 @@ obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
>> obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
>> obj-$(CONFIG_DRM_OMAP) += omapdrm/
>> obj-$(CONFIG_DRM_TILCDC) += tilcdc/
>> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc/
>> obj-$(CONFIG_DRM_QXL) += qxl/
>> obj-$(CONFIG_DRM_BOCHS) += bochs/
>> obj-$(CONFIG_DRM_MSM) += msm/
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/Kconfig b/drivers/gpu/drm/atmel_hlcdc/Kconfig
>> new file mode 100644
>> index 0000000..6ee5989
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/Kconfig
>> @@ -0,0 +1,13 @@
>> +config DRM_ATMEL_HLCDC
>> + tristate "DRM Support for ATMEL HLCDC Display Controller"
>> + depends on DRM && OF && ARM
>> + select DRM_KMS_HELPER
>> + select DRM_KMS_FB_HELPER
>> + select DRM_KMS_CMA_HELPER
>> + select DRM_GEM_CMA_HELPER
>> + select VIDEOMODE_HELPERS
>> + select BACKLIGHT_CLASS_DEVICE
>> + select BACKLIGHT_LCD_SUPPORT
>> + help
>> + Choose this option if you have an ATMEL SoC with HLCDC display
>> + controller, for example SAMA5D36EK.
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/Makefile b/drivers/gpu/drm/atmel_hlcdc/Makefile
>> new file mode 100644
>> index 0000000..4935c36
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/Makefile
>> @@ -0,0 +1,12 @@
>> +ccflags-y := -Iinclude/drm
>> +ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
>> + ccflags-y += -Werror
>> +endif
>> +
>> +atmel_hlcdc-y := \
>> + atmel_hlcdc_crtc.o \
>> + atmel_hlcdc_panel.o \
>> + atmel_hlcdc_backlight.o \
>> + atmel_hlcdc_drv.o
>> +
>> +obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel_hlcdc.o
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> new file mode 100644
>> index 0000000..8ed0767
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc.h
>> @@ -0,0 +1,771 @@
>> +/*
>> + * Header file for AT91 High end LCD Controller
>> + *
>> + * Data structure and register user interface
>> + *
>> + * Copyright (C) 2010 Atmel Corporation
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + *
>> + */
>> +#ifndef __ATMEL_HLCD_H__
>> +#define __ATMEL_HLCD_H__
>> +
>> +/* Lcdc hardware registers */
>> +#define ATMEL_LCDC_LCDCFG0 0x0000
>> +#define LCDC_LCDCFG0_CLKPOL (0x1 << 0)
>> +#define LCDC_LCDCFG0_CLKSEL (0x1 << 2)
>> +#define LCDC_LCDCFG0_CLKPWMSEL (0x1 << 3)
>> +#define LCDC_LCDCFG0_CGDISBASE (0x1 << 8)
>> +#define LCDC_LCDCFG0_CGDISOVR1 (0x1 << 9)
>> +#define LCDC_LCDCFG0_CGDISOVR2 (0x1 << 10)
>> +#define LCDC_LCDCFG0_CGDISHEO (0x1 << 11)
>> +#define LCDC_LCDCFG0_CGDISHCR (0x1 << 12)
>> +#define LCDC_LCDCFG0_CGDISPP (0x1 << 13)
>> +#define LCDC_LCDCFG0_CLKDIV_OFFSET 16
>> +#define LCDC_LCDCFG0_CLKDIV (0xff << LCDC_LCDCFG0_CLKDIV_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG1 0x0004
>> +#define LCDC_LCDCFG1_HSPW_OFFSET 0
>> +#define LCDC_LCDCFG1_HSPW (0x3f << LCDC_LCDCFG1_HSPW_OFFSET)
>> +#define LCDC_LCDCFG1_VSPW_OFFSET 16
>> +#define LCDC_LCDCFG1_VSPW (0x3f << LCDC_LCDCFG1_VSPW_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG2 0x0008
>> +#define LCDC_LCDCFG2_VFPW_OFFSET 0
>> +#define LCDC_LCDCFG2_VFPW (0x3f << LCDC_LCDCFG2_VFPW_OFFSET)
>> +#define LCDC_LCDCFG2_VBPW_OFFSET 16
>> +#define LCDC_LCDCFG2_VBPW (0x3f << LCDC_LCDCFG2_VBPW_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG3 0x000C
>> +#define LCDC_LCDCFG3_HFPW_OFFSET 0
>> +#define LCDC_LCDCFG3_HFPW (0xff << LCDC_LCDCFG3_HFPW_OFFSET)
>> +#define LCDC2_LCDCFG3_HFPW (0x1ff << LCDC_LCDCFG3_HFPW_OFFSET)
>> +#define LCDC_LCDCFG3_HBPW_OFFSET 16
>> +#define LCDC_LCDCFG3_HBPW (0xff << LCDC_LCDCFG3_HBPW_OFFSET)
>> +#define LCDC2_LCDCFG3_HBPW (0x1ff << LCDC_LCDCFG3_HBPW_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG4 0x0010
>> +#define LCDC_LCDCFG4_PPL_OFFSET 0
>> +#define LCDC_LCDCFG4_PPL (0x7ff << LCDC_LCDCFG4_PPL_OFFSET)
>> +#define LCDC_LCDCFG4_RPF_OFFSET 16
>> +#define LCDC_LCDCFG4_RPF (0x7ff << LCDC_LCDCFG4_RPF_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG5 0x0014
>> +#define LCDC_LCDCFG5_HSPOL (0x1 << 0)
>> +#define LCDC_LCDCFG5_VSPOL (0x1 << 1)
>> +#define LCDC_LCDCFG5_VSPDLYS (0x1 << 2)
>> +#define LCDC_LCDCFG5_VSPDLYE (0x1 << 3)
>> +#define LCDC_LCDCFG5_DISPPOL (0x1 << 4)
>> +#define LCDC_LCDCFG5_SERIAL (0x1 << 5)
>> +#define LCDC_LCDCFG5_DITHER (0x1 << 6)
>> +#define LCDC_LCDCFG5_DISPDLY (0x1 << 7)
>> +#define LCDC_LCDCFG5_MODE_OFFSET 8
>> +#define LCDC_LCDCFG5_MODE (0x3 << LCDC_LCDCFG5_MODE_OFFSET)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_12BPP (0x0 << 8)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_16BPP (0x1 << 8)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_18BPP (0x2 << 8)
>> +#define LCDC_LCDCFG5_MODE_OUTPUT_24BPP (0x3 << 8)
>> +#define LCDC_LCDCFG5_PP (0x1 << 10)
>> +#define LCDC_LCDCFG5_VSPSU (0x1 << 12)
>> +#define LCDC_LCDCFG5_VSPHO (0x1 << 13)
>> +#define LCDC_LCDCFG5_GUARDTIME_OFFSET 16
>> +#define LCDC_LCDCFG5_GUARDTIME (0x1f << LCDC_LCDCFG5_GUARDTIME_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDCFG6 0x0018
>> +#define LCDC_LCDCFG6_PWMPS_OFFSET 0
>> +#define LCDC_LCDCFG6_PWMPS (0x7 << LCDC_LCDCFG6_PWMPS_OFFSET)
>> +#define LCDC_LCDCFG6_PWMPOL (0x1 << 4)
>> +#define LCDC_LCDCFG6_PWMCVAL_OFFSET 8
>> +#define LCDC_LCDCFG6_PWMCVAL (0xff << LCDC_LCDCFG6_PWMCVAL_OFFSET)
>> +
>> +#define ATMEL_LCDC_LCDEN 0x0020
>> +#define LCDC_LCDEN_CLKEN (0x1 << 0)
>> +#define LCDC_LCDEN_SYNCEN (0x1 << 1)
>> +#define LCDC_LCDEN_DISPEN (0x1 << 2)
>> +#define LCDC_LCDEN_PWMEN (0x1 << 3)
>> +
>> +#define ATMEL_LCDC_LCDDIS 0x0024
>> +#define LCDC_LCDDIS_CLKDIS (0x1 << 0)
>> +#define LCDC_LCDDIS_SYNCDIS (0x1 << 1)
>> +#define LCDC_LCDDIS_DISPDIS (0x1 << 2)
>> +#define LCDC_LCDDIS_PWMDIS (0x1 << 3)
>> +#define LCDC_LCDDIS_CLKRST (0x1 << 8)
>> +#define LCDC_LCDDIS_SYNCRST (0x1 << 9)
>> +#define LCDC_LCDDIS_DISPRST (0x1 << 10)
>> +#define LCDC_LCDDIS_PWMRST (0x1 << 11)
>> +
>> +#define ATMEL_LCDC_LCDSR 0x0028
>> +#define LCDC_LCDSR_CLKSTS (0x1 << 0)
>> +#define LCDC_LCDSR_LCDSTS (0x1 << 1)
>> +#define LCDC_LCDSR_DISPSTS (0x1 << 2)
>> +#define LCDC_LCDSR_PWMSTS (0x1 << 3)
>> +#define LCDC_LCDSR_SIPSTS (0x1 << 4)
>> +
>> +#define ATMEL_LCDC_LCDIER 0x002C
>> +#define LCDC_LCDIER_SOFIE (0x1 << 0)
>> +#define LCDC_LCDIER_DISIE (0x1 << 1)
>> +#define LCDC_LCDIER_DISPIE (0x1 << 2)
>> +#define LCDC_LCDIER_FIFOERRIE (0x1 << 4)
>> +#define LCDC_LCDIER_BASEIE (0x1 << 8)
>> +#define LCDC_LCDIER_OVR1IE (0x1 << 9)
>> +#define LCDC_LCDIER_OVR2IE (0x1 << 10)
>> +#define LCDC_LCDIER_HEOIE (0x1 << 11)
>> +#define LCDC_LCDIER_HCRIE (0x1 << 12)
>> +#define LCDC_LCDIER_PPIE (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_LCDIDR 0x0030
>> +#define LCDC_LCDIDR_SOFID (0x1 << 0)
>> +#define LCDC_LCDIDR_DISID (0x1 << 1)
>> +#define LCDC_LCDIDR_DISPID (0x1 << 2)
>> +#define LCDC_LCDIDR_FIFOERRID (0x1 << 4)
>> +#define LCDC_LCDIDR_BASEID (0x1 << 8)
>> +#define LCDC_LCDIDR_OVR1ID (0x1 << 9)
>> +#define LCDC_LCDIDR_OVR2ID (0x1 << 10)
>> +#define LCDC_LCDIDR_HEOID (0x1 << 11)
>> +#define LCDC_LCDIDR_HCRID (0x1 << 12)
>> +#define LCDC_LCDIDR_PPID (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_LCDIMR 0x0034
>> +#define LCDC_LCDIMR_SOFIM (0x1 << 0)
>> +#define LCDC_LCDIMR_DISIM (0x1 << 1)
>> +#define LCDC_LCDIMR_DISPIM (0x1 << 2)
>> +#define LCDC_LCDIMR_FIFOERRIM (0x1 << 4)
>> +#define LCDC_LCDIMR_BASEIM (0x1 << 8)
>> +#define LCDC_LCDIMR_OVR1IM (0x1 << 9)
>> +#define LCDC_LCDIMR_OVR2IM (0x1 << 10)
>> +#define LCDC_LCDIMR_HEOIM (0x1 << 11)
>> +#define LCDC_LCDIMR_HCRIM (0x1 << 12)
>> +#define LCDC_LCDIMR_PPIM (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_LCDISR 0x0038
>> +#define LCDC_LCDISR_SOF (0x1 << 0)
>> +#define LCDC_LCDISR_DIS (0x1 << 1)
>> +#define LCDC_LCDISR_DISP (0x1 << 2)
>> +#define LCDC_LCDISR_FIFOERR (0x1 << 4)
>> +#define LCDC_LCDISR_BASE (0x1 << 8)
>> +#define LCDC_LCDISR_OVR1 (0x1 << 9)
>> +#define LCDC_LCDISR_OVR2 (0x1 << 10)
>> +#define LCDC_LCDISR_HEO (0x1 << 11)
>> +#define LCDC_LCDISR_HCR (0x1 << 12)
>> +#define LCDC_LCDISR_PP (0x1 << 13)
>> +
>> +#define ATMEL_LCDC_BASECHER 0x0040
>> +#define LCDC_BASECHER_CHEN (0x1 << 0)
>> +#define LCDC_BASECHER_UPDATEEN (0x1 << 1)
>> +#define LCDC_BASECHER_A2QEN (0x1 << 2)
>> +
>> +#define ATMEL_LCDC_BASECHDR 0x0044
>> +#define LCDC_BASECHDR_CHDIS (0x1 << 0)
>> +#define LCDC_BASECHDR_CHRST (0x1 << 8)
>> +
>> +#define ATMEL_LCDC_BASECHSR 0x0048
>> +#define LCDC_BASECHSR_CHSR (0x1 << 0)
>> +#define LCDC_BASECHSR_UPDATESR (0x1 << 1)
>> +#define LCDC_BASECHSR_A2QSR (0x1 << 2)
>> +
>> +#define ATMEL_LCDC_BASEIER 0x004C
>> +#define LCDC_BASEIER_DMA (0x1 << 2)
>> +#define LCDC_BASEIER_DSCR (0x1 << 3)
>> +#define LCDC_BASEIER_ADD (0x1 << 4)
>> +#define LCDC_BASEIER_DONE (0x1 << 5)
>> +#define LCDC_BASEIER_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEIDR 0x0050
>> +#define LCDC_BASEIDR_DMA (0x1 << 2)
>> +#define LCDC_BASEIDR_DSCR (0x1 << 3)
>> +#define LCDC_BASEIDR_ADD (0x1 << 4)
>> +#define LCDC_BASEIDR_DONE (0x1 << 5)
>> +#define LCDC_BASEIDR_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEIMR 0x0054
>> +#define LCDC_BASEIMR_DMA (0x1 << 2)
>> +#define LCDC_BASEIMR_DSCR (0x1 << 3)
>> +#define LCDC_BASEIMR_ADD (0x1 << 4)
>> +#define LCDC_BASEIMR_DONE (0x1 << 5)
>> +#define LCDC_BASEIMR_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEISR 0x0058
>> +#define LCDC_BASEISR_DMA (0x1 << 2)
>> +#define LCDC_BASEISR_DSCR (0x1 << 3)
>> +#define LCDC_BASEISR_ADD (0x1 << 4)
>> +#define LCDC_BASEISR_DONE (0x1 << 5)
>> +#define LCDC_BASEISR_OVR (0x1 << 6)
>> +
>> +#define ATMEL_LCDC_BASEHEAD 0x005C
>> +
>> +#define ATMEL_LCDC_BASEADDR 0x0060
>> +
>> +#define ATMEL_LCDC_BASECTRL 0x0064
>> +#define LCDC_BASECTRL_DFETCH (0x1 << 0)
>> +#define LCDC_BASECTRL_LFETCH (0x1 << 1)
>> +#define LCDC_BASECTRL_DMAIEN (0x1 << 2)
>> +#define LCDC_BASECTRL_DSCRIEN (0x1 << 3)
>> +#define LCDC_BASECTRL_ADDIEN (0x1 << 4)
>> +#define LCDC_BASECTRL_DONEIEN (0x1 << 5)
>> +
>> +#define ATMEL_LCDC_BASENEXT 0x0068
>> +
>> +#define ATMEL_LCDC_BASECFG0 0x006C
>> +#define LCDC_BASECFG0_SIF (0x1 << 0)
>> +#define LCDC_BASECFG0_BLEN_OFFSET 4
>> +#define LCDC_BASECFG0_BLEN (0x3 << LCDC_BASECFG0_BLEN_OFFSET)
>> +#define LCDC_BASECFG0_BLEN_AHB_SINGLE (0x0 << 4)
>> +#define LCDC_BASECFG0_BLEN_AHB_INCR4 (0x1 << 4)
>> +#define LCDC_BASECFG0_BLEN_AHB_INCR8 (0x2 << 4)
>> +#define LCDC_BASECFG0_BLEN_AHB_INCR16 (0x3 << 4)
>> +#define LCDC_BASECFG0_DLBO (0x1 << 8)
>> +
>> +#define ATMEL_LCDC_BASECFG1 0x0070
>> +#define LCDC_BASECFG1_CLUTEN (0x1 << 0)
>> +#define LCDC_BASECFG1_RGBMODE_OFFSET 4
>> +#define LCDC_BASECFG1_RGBMODE (0xf << LCDC_BASECFG1_RGBMODE_OFFSET)
>> +#define LCDC_BASECFG1_RGBMODE_12BPP_RGB_444 (0x0 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_ARGB_4444 (0x1 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGBA_4444 (0x2 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_RGB_565 (0x3 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_16BPP_TRGB_1555 (0x4 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666 (0x5 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED (0x6 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_1666 (0x7 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_19BPP_TRGB_PACKED (0x8 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888 (0x9 << 4)
>> +#define LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED (0xA << 4)
>> +#define LCDC_BASECFG1_RGBMODE_25BPP_TRGB_1888 (0xB << 4)
>> +#define LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888 (0xC << 4)
>> +#define LCDC_BASECFG1_RGBMODE_32BPP_RGBA_8888 (0xD << 4)
>> +#define LCDC_BASECFG1_CLUTMODE_OFFSET 8
>> +#define LCDC_BASECFG1_CLUTMODE (0x3 << LCDC_BASECFG1_CLUTMODE_OFFSET)
>> +#define LCDC_BASECFG1_CLUTMODE_1BPP (0x0 << 8)
>> +#define LCDC_BASECFG1_CLUTMODE_2BPP (0x1 << 8)
>> +#define LCDC_BASECFG1_CLUTMODE_4BPP (0x2 << 8)
>> +#define LCDC_BASECFG1_CLUTMODE_8BPP (0x3 << 8)
>> +
>> +#define ATMEL_LCDC_BASECFG2 0x0074
>> +
>> +#define ATMEL_LCDC_BASECFG3 0x0078
>> +#define LCDC_BASECFG3_BDEF_OFFSET 0
>> +#define LCDC_BASECFG3_BDEF (0xff << LCDC_BASECFG3_BDEF_OFFSET)
>> +#define LCDC_BASECFG3_GDEF_OFFSET 8
>> +#define LCDC_BASECFG3_GDEF (0xff << LCDC_BASECFG3_GDEF_OFFSET)
>> +#define LCDC_BASECFG3_RDEF_OFFSET 16
>> +#define LCDC_BASECFG3_RDEF (0xff << LCDC_BASECFG3_RDEF_OFFSET)
>> +
>> +#define ATMEL_LCDC_BASECFG4 0x007C
>> +#define LCDC_BASECFG4_DMA (0x1 << 8)
>> +#define LCDC_BASECFG4_REP (0x1 << 9)
>> +#define LCDC_BASECFG4_DISCEN (0x1 << 11)
>> +
>> +#define ATMEL_LCDC_BASECFG5 0x0080
>> +#define LCDC_BASECFG5_DISCXPOS_OFFSET 0
>> +#define LCDC_BASECFG5_DISCXPOS (0x7ff << LCDC_BASECFG5_DISCXPOS_OFFSET)
>> +#define LCDC_BASECFG5_DISCYPOS_OFFSET 16
>> +#define LCDC_BASECFG5_DISCYPOS (0x7ff << LCDC_BASECFG5_DISCYPOS_OFFSET)
>> +
>> +#define ATMEL_LCDC_BASECFG6 0x0084
>> +#define LCDC_BASECFG6_DISCXSIZE_OFFSET 0
>> +#define LCDC_BASECFG6_DISCXSIZE (0x7ff << LCDC_BASECFG6_DISCXSIZE_OFFSET)
>> +#define LCDC_BASECFG6_DISCYSIZE_OFFSET 16
>> +#define LCDC_BASECFG6_DISCYSIZE (0x7ff << LCDC_BASECFG6_DISCYSIZE_OFFSET)
>> +
>
> All layers use pretty much the same layout (IER,IDR, IMR, HEAD, ADDR, ...).
> Maybe you could define something like this:
>
> ATMEL_LCDC_CHER(layer) (layer->reg_offset + (0x0))
> ATMEL_LCDC_CHDR(layer) (layer->reg_offset + (0x4))
> ...
>
> with each layer storing its own reg_offset.
>
> IMHO, this would reduce the MACRO list size and thus make this file more
> readable.
>
Sure, it would be easier. For this RFC I used the header provided by
ATMEL with no modification, but it'll probably need a clean-up pass.
>
>> +#define ATMEL_LCDC_HEOCHER 0x0280
>> +#define ATMEL_LCDC2_HEOCHER 0x0340
>> +#define LCDC_HEOCHER_CHEN (0x1 << 0)
>> +#define LCDC_HEOCHER_UPDATEEN (0x1 << 1)
>> +#define LCDC_HEOCHER_A2QEN (0x1 << 2)
>
> [...]
>
>> +#define ATMEL_LCDC_HCRCLUT 0x1400
>> +#define ATMEL_LCDC2_HCRCLUT 0x1600
>> +#define LCDC_HCRCLUT_BCLUT_OFFSET 0
>> +#define LCDC_HCRCLUT_BCLUT (0xff << LCDC_HCRCLUT_BCLUT_OFFSET)
>> +#define LCDC_HCRCLUT_GCLUT_OFFSET 8
>> +#define LCDC_HCRCLUT_GCLUT (0xff << LCDC_HCRCLUT_GCLUT_OFFSET)
>> +#define LCDC_HCRCLUT_RCLUT_OFFSET 16
>> +#define LCDC_HCRCLUT_RCLUT (0xff << LCDC_HCRCLUT_RCLUT_OFFSET)
>> +#define LCDC_HCRCLUT_ACLUT_OFFSET 24
>> +#define LCDC_HCRCLUT_ACLUT (0xff << LCDC_HCRCLUT_ACLUT_OFFSET)
>> +
>> +/* Base layer CLUT */
>> +#define ATMEL_HLCDC_LUT 0x0400
>> +
>> +
>> +static inline void hlcdc_write(struct drm_device *dev, u32 reg, u32 data)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + iowrite32(data, priv->mmio + reg);
>> +}
>> +
>> +static inline u32 hlcdc_read(struct drm_device *dev, u32 reg)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + return ioread32(priv->mmio + reg);
>> +}
>> +
>> +#endif /* __ATMEL_HLCDC4_H__ */
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> new file mode 100644
>> index 0000000..143ba72
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.c
>> @@ -0,0 +1,92 @@
>> +/*
>> + * atmel_hlcdc_backlight.c -- Backlight driver for the atmel HLCDC controller
>> + *
>> + * Copyright (C) 2014 Traphandler
>> + *
>> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include <linux/backlight.h>
>> +
>> +#include "atmel_hlcdc_drv.h"
>> +#include "atmel_hlcdc.h"
>> +
>> +#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
>> +
>> +
>> +static int get_brightness(struct backlight_device *backlight)
>> +{
>> + struct drm_device *dev = bl_get_data(backlight);
>> +
>> + return (hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & LCDC_LCDCFG6_PWMCVAL)
>> + >> LCDC_LCDCFG6_PWMCVAL_OFFSET;
>> +}
>> +
>> +static int update_status(struct backlight_device *backlight)
>> +{
>> + struct drm_device *dev = bl_get_data(backlight);
>> + int brightness = backlight->props.brightness;
>> + u32 reg;
>> +
>> + if (backlight->props.power != FB_BLANK_UNBLANK ||
>> + backlight->props.state & BL_CORE_SUSPENDED)
>> + brightness = 0;
>> +
>> + reg = hlcdc_read(dev, ATMEL_LCDC_LCDCFG6) & ~LCDC_LCDCFG6_PWMCVAL;
>> + reg |= brightness << LCDC_LCDCFG6_PWMCVAL_OFFSET;
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, reg);
>> + DBG("new brightness is : %d\n", get_brightness(backlight));
>> + return 0;
>> +}
>> +
>> +
>> +
>> +static const struct backlight_ops atmel_drm_backlight_ops = {
>> + .options = BL_CORE_SUSPENDRESUME,
>> + .update_status = update_status,
>> + .get_brightness = get_brightness,
>> +};
>> +
>> +int atmel_drm_backlight_init(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct backlight_device *backlight;
>> +
>> + backlight = backlight_device_register("backlight", dev->dev, dev,
>> + &atmel_drm_backlight_ops , NULL);
>> + if (IS_ERR(backlight)) {
>> + dev_err(dev->dev, "unable to register backlight device: %ld\n",
>> + PTR_ERR(backlight));
>> + return PTR_ERR(backlight);
>> + }
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG6, LCDC_LCDCFG6_PWMPOL |
>> + (ATMEL_LCDC_CVAL_DEFAULT << LCDC_LCDCFG6_PWMCVAL_OFFSET));
>> +
>> + backlight->props.max_brightness = 0xFF;
>> + backlight->props.brightness = get_brightness(backlight);
>> + backlight->props.power = FB_BLANK_UNBLANK;
>> + backlight_update_status(backlight);
>> +
>> + priv->backlight = backlight;
>> +
>> + return 0;
>> +}
>> +
>> +void atmel_drm_backlight_exit(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> +
>> + backlight_device_unregister(priv->backlight);
>> +}
>
> Atmel's datasheet describe it as a PWM (that will most likely be used as
> a backlight, but still :-)).
> How about implementing a pwm chip and then use the backlight-pwm driver
> to expose a backlight device based on this PWM device ?
I thought about this when writing this part. I wondered if this PWM will
ever be used for something else than backlight control as the ATMEL's
chip already have several PWM outputs that are more advanced than this
one. It's more straightforward and the amount of code is less.
>
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> new file mode 100644
>> index 0000000..6a99101
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_backlight.h
>> @@ -0,0 +1,25 @@
>> +/*
>> + * Copyright (C) 2014 Traphandler
>> + *
>> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __ATMEL_HLCDC_BACKLIGHT_H__
>> +#define __ATMEL_HLCDC_BACKLIGHT_H__
>> +
>> +int atmel_drm_backlight_init(struct drm_device *dev);
>> +void atmel_drm_backlight_exit(struct drm_device *dev);
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> new file mode 100644
>> index 0000000..649fa19
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_crtc.c
>> @@ -0,0 +1,702 @@
>> +/*
>> + * Copyright (C) 2014 Traphandler
>> + *
>> + * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com)
>> + *
>> + * Base on the tilcdc driver
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include "drm_flip_work.h"
>> +
>> +#include "atmel_hlcdc_drv.h"
>> +#include "atmel_hlcdc.h"
>> +#include "atmel_hlcdc_ovl.h"
>> +
>> +#define MAX(x, y) ((x) > (y) ? (x) : (y))
>> +
>> +
>> +struct atmel_hlcd_dma_desc {
>> + u32 address;
>
> I think you should use dma_addr_t instead of u32.
>
>> + u32 control;
>> + u32 next;
>
> ditto
>
>> + u32 dummy; /* for 64-bit alignment */
>> +};
>> +
>> +enum {
>> + DMA_BASE = 0,
>> + DMA_OVR_1,
>> + DMA_OVR_2,
>> + DMA_HEO,
>> + DMA_HCR,
>> + DMA_PP,
>> + DMA_MAX
>> +};
>> +
>> +struct atmel_hlcdc_crtc {
>> + struct drm_crtc base;
>> + uint32_t dirty;
>> + dma_addr_t start, end;
>> + struct drm_pending_vblank_event *event;
>> + int dpms;
>> +
>> + struct atmel_hlcd_dma_desc *dma_descs[DMA_MAX];
>> + dma_addr_t dma_descs_phys[DMA_MAX];
>> +
>> + /* fb currently set to scanout 0/1: */
>> + struct drm_framebuffer *fb;
>> +
>> + /* for deferred fb unref's: */
>> + struct drm_flip_work unref_work;
>> +#ifdef USE_LUT
>> + u8 lut_r[256], lut_g[256], lut_b[256];
>> +#endif
>> +};
>> +#define to_atmel_hlcdc_crtc(x) container_of(x, struct atmel_hlcdc_crtc, base)
>> +
>> +static void unref_worker(struct drm_flip_work *work, void *val)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc =
>> + container_of(work, struct atmel_hlcdc_crtc, unref_work);
>> + struct drm_device *dev = atmel_hlcdc_crtc->base.dev;
>> +
>> + mutex_lock(&dev->mode_config.mutex);
>> + drm_framebuffer_unreference(val);
>> + mutex_unlock(&dev->mode_config.mutex);
>> +}
>> +
>> +static void update_scanout(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct drm_framebuffer *fb = crtc->fb;
>> +
>> + struct drm_gem_cma_object *gem;
>> + struct atmel_hlcd_dma_desc *desc = hlcdc_crtc->dma_descs[DMA_BASE];
>> + unsigned int depth, bpp;
>> + dma_addr_t start;
>> + dma_addr_t desc_phys = hlcdc_crtc->dma_descs_phys[DMA_BASE];
>> +
>> + drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
>> + gem = drm_fb_cma_get_gem_obj(fb, 0);
>> +
>> + start = gem->paddr + fb->offsets[0] +
>> + (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8);
>> +
>> + if (hlcdc_crtc->fb != fb) {
>> + struct drm_framebuffer *oldfb = hlcdc_crtc->fb;
>> + drm_framebuffer_reference(fb);
>> + hlcdc_crtc->fb = fb;
>> + if (oldfb) {
>> + drm_flip_work_queue(&hlcdc_crtc->unref_work, oldfb);
>> + drm_flip_work_commit(&hlcdc_crtc->unref_work, priv->wq);
>> + }
>> + }
>> +
>> + if (desc->address != start) {
>> + desc->address = start;
>> + desc->next = desc_phys;
>> + desc->control = LCDC_OVRCTRL_DFETCH;
>> + }
>> +
>> + if (hlcdc_read(dev, ATMEL_LCDC_BASENEXT) != desc_phys) {
>> + hlcdc_write(dev, ATMEL_LCDC_BASENEXT, desc_phys);
>
> I read the datasheet several times, and wonder how this could work.
>
> Here's what I understood:
>
> If you want to initiate a DMA transfer and the layer channel is not
> enabled yet, you have to write ATMEL_LCDC_BASEADDR, ATMEL_LCDC_BASENEXT
> and ATMEL_LCDC_BASECTRL registers, and then write the CHEN bit in the
> CHER register.
> If the layer channel is already enabled and a DMA transfer is in
> progress, you'd better use the HEAD pointer and write the A2QEN bit.
>
> Here, you're only writing the NEXT pointer, and AFAICT this can only
> work if the layer has already been enabled (by the bootloader for example).
OK. I'll put back the complete init of the DMA. This should probably be
changed to be more genreic so that other layers can also use this DMA
initialization.
>
>> + hlcdc_write(dev, ATMEL_LCDC_BASECHER, LCDC_BASECHER_UPDATEEN);
>> + }
>> +}
>> +
>> +static void start(struct drm_crtc *crtc)
>> +{
>> + struct drm_device *dev = crtc->dev;
>> +
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_CLKEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
>> + cpu_relax();
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_SYNCEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
>> + cpu_relax();
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_DISPEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
>> + cpu_relax();
>> + hlcdc_write(dev, ATMEL_LCDC_LCDEN, LCDC_LCDEN_PWMEN);
>> + while (!(hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
>> + cpu_relax();
>> +}
>> +
>> +static void stop(struct drm_crtc *crtc)
>> +{
>> + struct drm_device *dev = crtc->dev;
>> +
>> + /* Disable DISP signal */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_DISPDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_DISPSTS))
>> + cpu_relax();
>> + /* Disable synchronization */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_SYNCDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_LCDSTS))
>> + cpu_relax();
>> + /* Disable pixel clock */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_CLKDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_CLKSTS))
>> + cpu_relax();
>> + /* Disable PWM */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDDIS, LCDC_LCDDIS_PWMDIS);
>> + while ((hlcdc_read(dev, ATMEL_LCDC_LCDSR) & LCDC_LCDSR_PWMSTS))
>> + cpu_relax();
>> +}
>> +
>> +static void atmel_hlcdc_crtc_destroy(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> +
>> + WARN_ON(atmel_hlcdc_crtc->dpms == DRM_MODE_DPMS_ON);
>> +
>> + drm_crtc_cleanup(crtc);
>> + drm_flip_work_cleanup(&atmel_hlcdc_crtc->unref_work);
>> +
>> + if (atmel_hlcdc_crtc->dma_descs[0])
>> + dma_free_writecombine(dev->dev,
>> + sizeof(struct atmel_hlcd_dma_desc) * DMA_MAX,
>> + atmel_hlcdc_crtc->dma_descs[0],
>> + atmel_hlcdc_crtc->dma_descs_phys[0]);
>> + kfree(atmel_hlcdc_crtc);
>> +}
>> +
>> +static int atmel_hlcdc_crtc_page_flip(struct drm_crtc *crtc,
>> + struct drm_framebuffer *fb,
>> + struct drm_pending_vblank_event *event,
>> + uint32_t page_flip_flags)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> +
>> + if (atmel_hlcdc_crtc->event) {
>> + dev_err(dev->dev, "already pending page flip!\n");
>> + return -EBUSY;
>> + }
>> +
>> + crtc->fb = fb;
>> + atmel_hlcdc_crtc->event = event;
>> + update_scanout(crtc);
>> + return 0;
>> +}
>> +
>> +static void atmel_hlcdc_crtc_dpms(struct drm_crtc *crtc, int mode)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> +
>> + /* we really only care about on or off: */
>> + if (mode != DRM_MODE_DPMS_ON)
>> + mode = DRM_MODE_DPMS_OFF;
>> +
>> + if (atmel_hlcdc_crtc->dpms == mode)
>> + return;
>> +
>> + atmel_hlcdc_crtc->dpms = mode;
>> +
>> + pm_runtime_get_sync(dev->dev);
>> +
>> + if (mode == DRM_MODE_DPMS_ON) {
>> + pm_runtime_forbid(dev->dev);
>> + start(crtc);
>> + } else {
>> + stop(crtc);
>> + pm_runtime_allow(dev->dev);
>> + }
>> +
>> + pm_runtime_put_sync(dev->dev);
>> +}
>> +
>> +static bool atmel_hlcdc_crtc_mode_fixup(struct drm_crtc *crtc,
>> + const struct drm_display_mode *mode,
>> + struct drm_display_mode *adjusted_mode)
>> +{
>> + return true;
>> +}
>> +
>> +static void atmel_hlcdc_crtc_prepare(struct drm_crtc *crtc)
>> +{
>> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
>> +}
>> +
>> +static void atmel_hlcdc_crtc_commit(struct drm_crtc *crtc)
>> +{
>> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
>> +}
>> +
>> +static u32 atmel_hlcdfb_get_rgbmode(struct device *dev, int depth, int bpp)
>> +{
>> + u32 value = 0;
>> +
>> + switch (depth) {
>> + case 1:
>> + value = LCDC_BASECFG1_CLUTMODE_1BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 2:
>> + value = LCDC_BASECFG1_CLUTMODE_2BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 4:
>> + value = LCDC_BASECFG1_CLUTMODE_4BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 8:
>> + value = LCDC_BASECFG1_CLUTMODE_8BPP | LCDC_BASECFG1_CLUTEN;
>> + break;
>> + case 12:
>> + value = LCDC_BASECFG1_RGBMODE_12BPP_RGB_444;
>> + break;
>> + case 16:
>> + value = LCDC_BASECFG1_RGBMODE_16BPP_RGB_565;
>> + break;
>> + case 18:
>> + value = LCDC_BASECFG1_RGBMODE_18BPP_RGB_666_PACKED;
>> + break;
>> + case 24:
>> + value = LCDC_BASECFG1_RGBMODE_24BPP_RGB_888_PACKED;
>> + break;
>> + case 32:
>> + value = LCDC_BASECFG1_RGBMODE_32BPP_ARGB_8888;
>> + break;
>> + default:
>> + dev_err(dev, "Cannot set video mode for depth %d, bpp %d\n",
>> + depth, bpp);
>> + break;
>> + }
>> +
>> + return value;
>> +}
>> +
>> +
>> +void atmel_hlcdc_crtc_update_clk(struct drm_crtc *crtc, int clock)
>> +{
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + unsigned long value;
>> + unsigned long clk_value_khz;
>> +
>> + if (clock == 0)
>> + clock = crtc->mode.clock;
>> +
>> + pm_runtime_get_sync(dev->dev);
>> +
>> + clk_value_khz = clk_get_rate(priv->clk) / 1000;
>> +
>> + value = DIV_ROUND_CLOSEST(clk_value_khz, clock);
>> +
>> + if (value < 1) {
>> + dev_notice(dev->dev, "using system clock as pixel clock\n");
>> + value = LCDC_LCDCFG0_CLKPWMSEL | LCDC_LCDCFG0_CGDISBASE;
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
>> + } else {
>> + dev_dbg(dev->dev, " updated pixclk: %lu KHz\n",
>> + clk_value_khz / value);
>> + value = value - 2;
>> + dev_dbg(dev->dev, " * programming CLKDIV = 0x%08lx\n",
>> + value);
>> + value = LCDC_LCDCFG0_CLKPWMSEL |
>> + (value << LCDC_LCDCFG0_CLKDIV_OFFSET)
>> + | LCDC_LCDCFG0_CGDISBASE;
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG0, value);
>> + }
>> +
>> + pm_runtime_put_sync(dev->dev);
>> +}
>> +
>> +static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *crtc,
>> + struct drm_display_mode *mode,
>> + struct drm_display_mode *adjusted_mode,
>> + int x, int y,
>> + struct drm_framebuffer *old_fb)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + int dpms = atmel_hlcdc_crtc->dpms;
>> + int hbp, hfp, hsw, vbp, vfp, vsw;
>> + unsigned int depth, bpp;
>> + unsigned long value;
>> + int ret;
>> +
>> + ret = atmel_hlcdc_crtc_mode_valid(crtc, mode);
>> + if (WARN_ON(ret))
>> + return ret;
>> +
>> + pm_runtime_get_sync(dev->dev);
>> +
>> + if (dpms == DRM_MODE_DPMS_ON)
>> + atmel_hlcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
>> +
>> + dev_dbg(dev->dev, "%s:\n", __func__);
>> +
>> +
>> + /* Set pixel clock */
>> + atmel_hlcdc_crtc_update_clk(crtc, mode->clock);
>> +
>> + /* Initialize control register 5 */
>> + value = priv->default_lcdcfg5;
>> + value |= (priv->guard_time << LCDC_LCDCFG5_GUARDTIME_OFFSET)
>> + | LCDC_LCDCFG5_DISPDLY
>> + | LCDC_LCDCFG5_VSPDLYS;
>> +
>> + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
>> + value |= LCDC_LCDCFG5_HSPOL;
>> +
>> + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
>> + value |= LCDC_LCDCFG5_VSPOL;
>> +
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG5 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG5, value);
>> +
>> +
>> + /* Configure timings: */
>> + hbp = MAX(mode->htotal - mode->hsync_end, 1);
>> + hfp = MAX(mode->hsync_start - mode->hdisplay, 1);
>> + hsw = MAX(mode->hsync_end - mode->hsync_start, 1);
>> + vbp = MAX(mode->vtotal - mode->vsync_end, 0);
>> + vfp = MAX(mode->vsync_start - mode->vdisplay, 1);
>> + vsw = MAX(mode->vsync_end - mode->vsync_start, 1);
>> +
>> + DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
>> + mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
>> +
>> + /* Vertical & Horizontal Timing */
>> + value = (vsw - 1) << LCDC_LCDCFG1_VSPW_OFFSET;
>> + value |= (hsw - 1) << LCDC_LCDCFG1_HSPW_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG1 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG1, value);
>> +
>> + value = (vbp) << LCDC_LCDCFG2_VBPW_OFFSET;
>> + value |= (vfp - 1) << LCDC_LCDCFG2_VFPW_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG2 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG2, value);
>> +
>> + value = (hbp - 1) << LCDC_LCDCFG3_HBPW_OFFSET;
>> + value |= (hfp - 1) << LCDC_LCDCFG3_HFPW_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG3 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG3, value);
>> +
>> + /* Display size */
>> + value = (mode->vdisplay - 1) << LCDC_LCDCFG4_RPF_OFFSET;
>> + value |= (mode->hdisplay - 1) << LCDC_LCDCFG4_PPL_OFFSET;
>> + dev_dbg(dev->dev, " * LCDC_LCDCFG4 = %08lx\n", value);
>> + hlcdc_write(dev, ATMEL_LCDC_LCDCFG4, value);
>> +
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG0,
>> + LCDC_BASECFG0_BLEN_AHB_INCR16 | LCDC_BASECFG0_DLBO);
>> +
>> + drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp);
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG1,
>> + atmel_hlcdfb_get_rgbmode(dev->dev, depth, bpp));
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG2, 0);
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG3, 0); /* Default color */
>> + hlcdc_write(dev, ATMEL_LCDC_BASECFG4, LCDC_BASECFG4_DMA);
>> +
>> + /* Disable all interrupts */
>> + hlcdc_write(dev, ATMEL_LCDC_LCDIDR, ~0UL);
>> + hlcdc_write(dev, ATMEL_LCDC_BASEIDR, ~0UL);
>> + /* Enable BASE LAYER overflow interrupts */
>> + hlcdc_write(dev, ATMEL_LCDC_BASEIER, LCDC_BASEIER_OVR);
>> + /* Enable FIFO error interrupt and the global BASE LAYER interrupt*/
>> + hlcdc_write(dev, ATMEL_LCDC_LCDIER, LCDC_LCDIER_FIFOERRIE |
>> + LCDC_LCDIER_BASEIE);
>> +
>> +
>> + update_scanout(crtc);
>> +
>> + atmel_hlcdc_crtc_dpms(crtc, dpms);
>> +
>> + pm_runtime_put_sync(dev->dev);
>> + return 0;
>> +}
>> +
>> +static int atmel_hlcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
>> + struct drm_framebuffer *old_fb)
>> +{
>> + update_scanout(crtc);
>> + return 0;
>> +}
>> +
>> +#ifdef USE_LUT
>> +static void atmel_hlcdc_crtc_load_lut(struct drm_crtc *crtc)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> + struct drm_device *dev = crtc->dev;
>> + int i;
>> +
>> + if (!crtc->enabled)
>> + return;
>> +
>> + for (i = 0; i < 256; i++)
>> + hlcdc_write(dev, ATMEL_HLCDC_LUT + (i*4),
>> + (atmel_hlcdc_crtc->lut_r[i] << 16) |
>> + (atmel_hlcdc_crtc->lut_g[i] << 8) |
>> + (atmel_hlcdc_crtc->lut_b[i] << 0));
>> +}
>> +void atmel_hlcdc_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
>> + u16 blue, int regno)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> +
>> + atmel_hlcdc_crtc->lut_r[regno] = red;
>> + atmel_hlcdc_crtc->lut_g[regno] = green;
>> + atmel_hlcdc_crtc->lut_b[regno] = blue;
>> +}
>> +
>> +void atmel_hlcdc_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
>> + u16 *blue, int regno)
>> +{
>> + struct atmel_hlcdc_crtc *atmel_hlcdc_crtc = to_atmel_hlcdc_crtc(crtc);
>> +
>> + *red = atmel_hlcdc_crtc->lut_r[regno];
>> + *green = atmel_hlcdc_crtc->lut_g[regno];
>> + *blue = atmel_hlcdc_crtc->lut_b[regno];
>> +}
>> +#endif
>> +
>> +static const struct drm_crtc_funcs atmel_hlcdc_crtc_funcs = {
>> + .destroy = atmel_hlcdc_crtc_destroy,
>> + .set_config = drm_crtc_helper_set_config,
>> + .page_flip = atmel_hlcdc_crtc_page_flip,
>> +};
>> +
>> +static const struct drm_crtc_helper_funcs atmel_hlcdc_crtc_helper_funcs = {
>> + .dpms = atmel_hlcdc_crtc_dpms,
>> + .mode_fixup = atmel_hlcdc_crtc_mode_fixup,
>> + .prepare = atmel_hlcdc_crtc_prepare,
>> + .commit = atmel_hlcdc_crtc_commit,
>> + .mode_set = atmel_hlcdc_crtc_mode_set,
>> + .mode_set_base = atmel_hlcdc_crtc_mode_set_base,
>>
>> +/*
>> + * DRM operations:
>> + */
>> +
>> +static int atmel_hlcdc_unload(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + struct atmel_hlcdc_module *mod, *cur;
>> +
>> + drm_kms_helper_poll_fini(dev);
>> + drm_mode_config_cleanup(dev);
>> + drm_vblank_cleanup(dev);
>> +
>> + pm_runtime_get_sync(dev->dev);
>> + drm_irq_uninstall(dev);
>> + pm_runtime_put_sync(dev->dev);
>> +
>> +#ifdef CONFIG_CPU_FREQ
>> + cpufreq_unregister_notifier(&priv->freq_transition,
>> + CPUFREQ_TRANSITION_NOTIFIER);
>> +#endif
>> +
>> + if (priv->clk)
>> + clk_put(priv->clk);
>> +
>> + if (priv->mmio)
>> + iounmap(priv->mmio);
>> +
>> + flush_workqueue(priv->wq);
>> + destroy_workqueue(priv->wq);
>> +
>> + dev->dev_private = NULL;
>> +
>> + pm_runtime_disable(dev->dev);
>> +
>> + list_for_each_entry_safe(mod, cur, &module_list, list) {
>> + DBG("destroying module: %s", mod->name);
>> + mod->funcs->destroy(mod);
>> + }
>> +
>> + kfree(priv);
>> +
>> + return 0;
>> +}
>> +
>> +static int atmel_hlcdc_load(struct drm_device *dev, unsigned long flags)
>> +{
>> + struct platform_device *pdev = dev->platformdev;
>> + struct device_node *node = pdev->dev.of_node;
>> + struct atmel_hlcdc_drm_private *priv;
>> + struct atmel_hlcdc_module *mod;
>> + struct resource *res;
>> + u32 bpp = 0;
>> + int ret;
>> +
>> + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
>> + if (!priv) {
>> + dev_err(dev->dev, "failed to allocate private data\n");
>> + return -ENOMEM;
>> + }
>> +
>> + dev->dev_private = priv;
>> +
>> + priv->wq = alloc_ordered_workqueue("atmel_hlcdc", 0);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res) {
>> + dev_err(dev->dev, "failed to get memory resource\n");
>> + ret = -EINVAL;
>> + goto fail;
>> + }
>> +
>> + priv->mmio = ioremap_nocache(res->start, resource_size(res));
>> + if (!priv->mmio) {
>> + dev_err(dev->dev, "failed to ioremap\n");
>> + ret = -ENOMEM;
>> + goto fail;
>> + }
>> +
>> + priv->clk = clk_get(dev->dev, "lcdc_clk");
> Make use of devm functions whenever possible.
>> + if (IS_ERR(priv->clk)) {
>> + dev_err(dev->dev, "failed to get lcd clock\n");
>> + ret = -ENODEV;
>> + goto fail;
>> + }
>> + clk_prepare_enable(priv->clk);
>> +
>> + priv->bus_clk = clk_get(dev->dev, "bus_clk");
>> + if (IS_ERR(priv->bus_clk)) {
>> + dev_dbg(dev->dev, "no bus clock defined.\n");
>> + priv->bus_clk = NULL;
>> + }
>> + if (priv->bus_clk)
>> + clk_prepare_enable(priv->bus_clk);
>> +
>> +#ifdef CONFIG_CPU_FREQ
>> + priv->lcd_fck_rate = clk_get_rate(priv->clk);
>> + priv->freq_transition.notifier_call = cpufreq_transition;
>> + ret = cpufreq_register_notifier(&priv->freq_transition,
>> + CPUFREQ_TRANSITION_NOTIFIER);
>> + if (ret) {
>> + dev_err(dev->dev, "failed to register cpufreq notifier\n");
>> + goto fail;
>> + }
>> +#endif
>> +
>> + if (of_property_read_u32(node, "default-lcdcfg5",
>> + &priv->default_lcdcfg5))
>> + priv->default_lcdcfg5 = LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
>> +
>> + DBG("LCDCFG5 default value 0x%x", priv->default_lcdcfg5);
>> +
>> + if (of_property_read_u32(node, "guard-time", &priv->guard_time))
>> + priv->guard_time = 9;
>> +
>> + DBG("Guard time Value 0x%x", priv->guard_time);
>> +
>> + if (of_property_read_u32(node, "hlcdc,max-pixelclock",
>> + &priv->max_pixelclock))
>> + priv->max_pixelclock = ATMEL_HLCDC_DEFAULT_MAX_PIXELCLOCK;
>> +
>> + DBG("Maximum Pixel Clock Value %dKHz", priv->max_pixelclock);
>> +
>> + pm_runtime_enable(dev->dev);
>> +
>> + ret = modeset_init(dev);
>> + if (ret < 0) {
>> + dev_err(dev->dev, "failed to initialize mode setting\n");
>> + goto fail;
>> + }
>> +
>> + ret = drm_vblank_init(dev, 1);
>> + if (ret < 0) {
>> + dev_err(dev->dev, "failed to initialize vblank\n");
>> + goto fail;
>> + }
>> +
>> + pm_runtime_get_sync(dev->dev);
>> + ret = drm_irq_install(dev);
>> + pm_runtime_put_sync(dev->dev);
>> + if (ret < 0) {
>> + dev_err(dev->dev, "failed to install IRQ handler\n");
>> + goto fail;
>> + }
>> +
>> + platform_set_drvdata(pdev, dev);
>> +
>> + list_for_each_entry(mod, &module_list, list) {
>> + DBG("%s: preferred_bpp: %d", mod->name, mod->preferred_bpp);
>> + bpp = mod->preferred_bpp;
>> + if (bpp > 0)
>> + break;
>> + }
>> +
>> + priv->fbdev = drm_fbdev_cma_init(dev, bpp,
>> + dev->mode_config.num_crtc,
>> + dev->mode_config.num_connector);
>> + drm_kms_helper_poll_init(dev);
>> +
>> + return 0;
>> +
>> +fail:
>> + atmel_hlcdc_unload(dev);
>> + return ret;
>> +}
>> +
>> +static void atmel_hlcdc_preclose(struct drm_device *dev, struct drm_file *file)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + atmel_hlcdc_crtc_cancel_page_flip(priv->crtc, file);
>> +}
>> +
>> +static void atmel_hlcdc_lastclose(struct drm_device *dev)
>> +{
>> + struct atmel_hlcdc_drm_private *priv = dev->dev_private;
>> + drm_fbdev_cma_restore_mode(priv->fbdev);
>> +}
>> +
> [...]
>> +/*
>> + * Connector:
>> + */
>> +
>> +struct panel_connector {
>> + struct drm_connector base;
>> +
>> + struct drm_encoder *encoder; /* our connected encoder */
>> + struct panel_module *mod;
>> +};
>> +#define to_panel_connector(x) container_of(x, struct panel_connector, base)
>> +
>> +
>> +static void panel_connector_destroy(struct drm_connector *connector)
>> +{
>> + struct panel_connector *panel_con = to_panel_connector(connector);
>> + drm_connector_cleanup(connector);
>> + kfree(panel_con);
>> +}
>> +
>> +static enum drm_connector_status panel_connector_detect(
>> + struct drm_connector *connector,
>>
>> +static struct of_device_id panel_of_match[];
>> +
>> +static int panel_probe(struct platform_device *pdev)
>> +{
>> + struct device_node *node = pdev->dev.of_node;
>> + struct panel_module *panel_mod;
>> + struct atmel_hlcdc_module *mod;
>> + struct pinctrl *pinctrl;
>> + int ret = -EINVAL;
>> +
>> + /* bail out early if no DT data: */
>> + if (!node) {
>> + dev_err(&pdev->dev, "device-tree data is missing\n");
>> + return -ENXIO;
>> + }
>> + panel_mod = kzalloc(sizeof(*panel_mod), GFP_KERNEL);
>> + if (!panel_mod)
>> + return -ENOMEM;
>> +
>> + mod = &panel_mod->base;
>> +
>> + pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
>> + if (IS_ERR(pinctrl))
>> + dev_warn(&pdev->dev, "pins are not configured\n");
>> +
>> + panel_mod->timings = of_get_display_timings(node);
>> + if (!panel_mod->timings) {
>> + dev_err(&pdev->dev, "could not get panel timings\n");
>> + goto fail;
>> + }
>> +
>> + if (of_get_panel_info(&pdev->dev, node, panel_mod) < 0) {
>> + dev_err(&pdev->dev, "could not get panel info\n");
>> + goto fail;
>> + }
>> +
>> + mod->preferred_bpp = panel_mod->preferred_bpp;
>> +
>> + panel_mod->backlight = of_find_backlight_by_node(node);
>> + if (panel_mod->backlight)
>> + dev_info(&pdev->dev, "found backlight\n");
>> +
>> +
>> + atmel_hlcdc_module_init(mod, "panel", &panel_module_ops);
>> +
>> + return 0;
>> +
>> +fail:
>> + panel_destroy(mod);
>> + return ret;
>> +}
>> +
>> +static int panel_remove(struct platform_device *pdev)
>> +{
>> + return 0;
>> +}
>> +
>> +static struct of_device_id panel_of_match[] = {
>> + { .compatible = "atmel,hlcdc,panel", },
>> + { },
>> +};
>> +
>> +struct platform_driver panel_driver = {
>> + .probe = panel_probe,
>> + .remove = panel_remove,
>> + .driver = {
>> + .owner = THIS_MODULE,
>> + .name = "panel",
>> + .of_match_table = panel_of_match,
>> + },
>> +};
>> +
>> +int __init atmel_hlcdc_panel_init(void)
>> +{
>> + return platform_driver_register(&panel_driver);
>> +}
>> +
>> +void __exit atmel_hlcdc_panel_fini(void)
>> +{
>> + platform_driver_unregister(&panel_driver);
>> +}
>
> Wouldn't it make more sense to use the drm_panel infrastructure (and the
> simple-panel driver) instead of implementing a new panel layer for the
> HLCDC driver ?
> You'd still have to implement the hlcdc glue to use an LCD panel (to
> convert panel timings to hlcdc timings), but at least you'll reuse the
> common DT bindings.
I actually did this when I did a mockup for the at91sam9261ek and I
think that's definitely the way to go. I just did not include this for
the RFC to keep it small.
>
> This is all for the moment, but I definitely need to dig more into the
> code for a better review :-).
>
> Best Regards,
>
> Boris
>
>> diff --git a/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>> new file mode 100644
>> index 0000000..0f66169
>> --- /dev/null
>> +++ b/drivers/gpu/drm/atmel_hlcdc/atmel_hlcdc_panel.h
>> @@ -0,0 +1,28 @@
>> +/*
>> + * Copyright (C) 2014 Traphandler
>> + * Copyright (C) 2012 Texas Instruments
>> + *
>> + * Base on the tilcdc panel driver
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License version 2 as published by
>> + * the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#ifndef __ATMEL_HLCDC_PANEL_H__
>> +#define __ATMEL_HLCDC_PANEL_H__
>> +
>> +/* sub-module for generic lcd panel output */
>> +
>> +int atmel_hlcdc_panel_init(void);
>> +void atmel_hlcdc_panel_fini(void);
>> +
>> +#endif /* __ATMEL_HLCDC_PANEL_H__ */
>
^ permalink raw reply [flat|nested] 41+ messages in thread
end of thread, other threads:[~2014-05-01 6:39 UTC | newest]
Thread overview: 41+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-18 9:45 [RFC 0/3] DRM driver for the ATMEL High end LCD controller Jean-Jacques Hiblot
2014-04-18 9:45 ` Jean-Jacques Hiblot
2014-04-18 9:45 ` [RFC 1/3] atmel: drm: added drm driver for the atmel hlcd controller Jean-Jacques Hiblot
2014-04-18 9:45 ` Jean-Jacques Hiblot
2014-04-18 9:45 ` Jean-Jacques Hiblot
2014-04-18 13:21 ` Boris BREZILLON
2014-04-18 13:21 ` Boris BREZILLON
2014-04-18 14:31 ` Robert Nelson
2014-04-18 14:31 ` Robert Nelson
2014-04-18 14:31 ` Robert Nelson
2014-04-19 19:03 ` Jean-Jacques Hiblot
2014-04-19 19:03 ` Jean-Jacques Hiblot
2014-04-19 19:03 ` Jean-Jacques Hiblot
2014-04-28 19:22 ` Boris BREZILLON
2014-04-28 19:22 ` Boris BREZILLON
2014-05-01 6:34 ` Jean-Jacques Hiblot
2014-05-01 6:34 ` Jean-Jacques Hiblot
2014-04-18 9:45 ` [RFC 2/3] atmel: drm: dt: Added DT entry for the atmel hlcdc found in the sama5 Jean-Jacques Hiblot
2014-04-18 9:45 ` Jean-Jacques Hiblot
2014-04-18 9:45 ` Jean-Jacques Hiblot
2014-04-18 9:45 ` [RFC 3/3] atmel: dt: Add supports for the lcdc support on the sama5d36ek Jean-Jacques Hiblot
2014-04-18 9:45 ` Jean-Jacques Hiblot
2014-04-18 9:45 ` Jean-Jacques Hiblot
2014-04-18 14:48 ` Robert Nelson
2014-04-18 14:48 ` Robert Nelson
2014-04-18 14:48 ` Robert Nelson
2014-04-19 19:07 ` Jean-Jacques Hiblot
2014-04-19 19:07 ` Jean-Jacques Hiblot
2014-04-19 19:07 ` Jean-Jacques Hiblot
2014-04-18 13:37 ` [RFC 0/3] DRM driver for the ATMEL High end LCD controller Boris BREZILLON
2014-04-18 13:37 ` Boris BREZILLON
2014-04-23 15:36 ` Tim Niemeyer
2014-04-23 15:36 ` Tim Niemeyer
2014-04-24 12:14 ` Boris BREZILLON
2014-04-24 12:14 ` Boris BREZILLON
2014-04-24 12:46 ` Tim Niemeyer
2014-04-24 12:46 ` Tim Niemeyer
2014-04-24 16:59 ` Jean-Jacques Hiblot
2014-04-24 16:59 ` Jean-Jacques Hiblot
2014-04-30 14:31 ` Jean-Jacques Hiblot
2014-04-30 14:31 ` Jean-Jacques Hiblot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.