[Qemu-devel] [PULL 00/10] target-arm queue

[Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

Nothing earthshattering here, but it does have the patch which
actually lets us boot an emulated AArch64 CPU on a board...

thanks
-- PMM

The following changes since commit 051b9980b99dbfba22ea5f79bd3708d513ae121d:

  Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-6' into staging (2014-05-01 14:17:33 +0100)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20140501

for you to fetch changes up to f42c5c8ec8aa0e15583487ffee62964830751623:

  hw/arm/virt: Add support for Cortex-A57 (2014-05-01 15:25:52 +0100)

----------------------------------------------------------------
target-arm queue:
 * implement XScale cache lockdown cp15 ops
 * fix v7M CPUID base register
 * implement WFE and YIELD as yields for A64
 * fix A64 "BLR LR"
 * support Cortex-A57 in virt machine model
 * a few other minor AArch64 bugfixes

----------------------------------------------------------------
Edgar E. Iglesias (4):
      target-arm: Make vbar_write 64bit friendly on 32bit hosts
      target-arm: A64: Handle blr lr
      target-arm: A64: Fix a typo when declaring TLBI ops
      target-arm: Correct a comment refering to EL0

Peter Maydell (4):
      target-arm: Implement XScale cache lockdown operations as NOPs
      hw/arm/virt: Create the GIC ourselves rather than (ab)using a15mpcore_priv
      hw/arm/virt: Put GIC register banks on 64K boundaries
      hw/arm/virt: Add support for Cortex-A57

Rabin Vincent (1):
      armv7m_nvic: fix CPUID Base Register

Rob Herring (1):
      target-arm: implement WFE/YIELD as a yield for AArch64

 hw/arm/virt.c              | 93 ++++++++++++++++++++++++++++++----------------
 hw/intc/armv7m_nvic.c      |  2 +-
 target-arm/helper.c        | 41 +++++++++++++-------
 target-arm/op_helper.c     |  2 +-
 target-arm/translate-a64.c |  9 ++++-
 5 files changed, 99 insertions(+), 48 deletions(-)

[Qemu-devel] [PULL 01/10] target-arm: Implement XScale cache lockdown operations as NOPs

[Peter Maydell]

XScale defines some implementation-specific coprocessor registers
for doing cache lockdown operations. Since QEMU doesn't model a
cache no proper implementation is possible, but NOP out the
registers so that guest code like u-boot that tries to use them
doesn't crash.

Reported-by: <prqek@centrum.cz>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/helper.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 43c1b4f..7c083c3 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1578,6 +1578,21 @@ static const ARMCPRegInfo xscale_cp_reginfo[] = {
       .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW,
       .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr),
       .resetvalue = 0, },
+    /* XScale specific cache-lockdown: since we have no cache we NOP these
+     * and hope the guest does not really rely on cache behaviour.
+     */
+    { .name = "XSCALE_LOCK_ICACHE_LINE",
+      .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0,
+      .access = PL1_W, .type = ARM_CP_NOP },
+    { .name = "XSCALE_UNLOCK_ICACHE",
+      .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1,
+      .access = PL1_W, .type = ARM_CP_NOP },
+    { .name = "XSCALE_DCACHE_LOCK",
+      .cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 0,
+      .access = PL1_RW, .type = ARM_CP_NOP },
+    { .name = "XSCALE_UNLOCK_DCACHE",
+      .cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 1,
+      .access = PL1_W, .type = ARM_CP_NOP },
     REGINFO_SENTINEL
 };
 
-- 
1.9.2

[Qemu-devel] [PULL 02/10] armv7m_nvic: fix CPUID Base Register

[Peter Maydell]

From: Rabin Vincent <rabin@rab.in>

cp15.c0_cpuid is never initialized for ARMv7-M; take the value directly
from cpu->midr instead.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Message-id: 1398036308-32166-1-git-send-email-rabin@rab.in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/intc/armv7m_nvic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c
index 6066fa6..f5b0c3b 100644
--- a/hw/intc/armv7m_nvic.c
+++ b/hw/intc/armv7m_nvic.c
@@ -173,7 +173,7 @@ static uint32_t nvic_readl(nvic_state *s, uint32_t offset)
         return 10000;
     case 0xd00: /* CPUID Base.  */
         cpu = ARM_CPU(current_cpu);
-        return cpu->env.cp15.c0_cpuid;
+        return cpu->midr;
     case 0xd04: /* Interrupt Control State.  */
         /* VECTACTIVE */
         val = s->gic.running_irq[0];
-- 
1.9.2

[Qemu-devel] [PULL 03/10] target-arm: implement WFE/YIELD as a yield for AArch64

[Peter Maydell]

From: Rob Herring <rob.herring@linaro.org>

Like was done for AArch32 for WFE, implement both WFE and YIELD as a
yield operation. This speeds up multi-core system emulation.

Signed-off-by: Rob Herring <rob.herring@linaro.org>
Message-id: 1397588401-20366-1-git-send-email-robherring2@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/translate-a64.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index d86b8ff..e31e069 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -1151,6 +1151,8 @@ static void handle_hint(DisasContext *s, uint32_t insn,
         return;
     case 1: /* YIELD */
     case 2: /* WFE */
+        s->is_jmp = DISAS_WFE;
+        return;
     case 4: /* SEV */
     case 5: /* SEVL */
         /* we treat all as NOP at least for now */
@@ -10765,6 +10767,10 @@ void gen_intermediate_code_internal_a64(ARMCPU *cpu,
         case DISAS_EXC:
         case DISAS_SWI:
             break;
+        case DISAS_WFE:
+            gen_a64_set_pc_im(dc->pc);
+            gen_helper_wfe(cpu_env);
+            break;
         case DISAS_WFI:
             /* This is a special case because we don't want to just halt the CPU
              * if trying to debug across a WFI.
-- 
1.9.2

[Qemu-devel] [PULL 04/10] target-arm: Make vbar_write 64bit friendly on 32bit hosts

[Peter Maydell]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1398926097-28097-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 7c083c3..7823e8c 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -657,7 +657,7 @@ static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
      * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7
      * requires the bottom five bits to be RAZ/WI because they're UNK/SBZP.)
      */
-    env->cp15.c12_vbar = value & ~0x1Ful;
+    env->cp15.c12_vbar = value & ~0x1FULL;
 }
 
 static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri)
-- 
1.9.2

[Qemu-devel] [PULL 05/10] target-arm: A64: Handle blr lr

[Peter Maydell]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

For linked branches, updates to the link register happen
conceptually after the read of the branch target register.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Cc: qemu-stable@nongnu.org
Message-id: 1398926097-28097-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/translate-a64.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index e31e069..b62db4d 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -1509,8 +1509,10 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
     switch (opc) {
     case 0: /* BR */
     case 2: /* RET */
+        tcg_gen_mov_i64(cpu_pc, cpu_reg(s, rn));
         break;
     case 1: /* BLR */
+        tcg_gen_mov_i64(cpu_pc, cpu_reg(s, rn));
         tcg_gen_movi_i64(cpu_reg(s, 30), s->pc);
         break;
     case 4: /* ERET */
@@ -1529,7 +1531,6 @@ static void disas_uncond_b_reg(DisasContext *s, uint32_t insn)
         return;
     }
 
-    tcg_gen_mov_i64(cpu_pc, cpu_reg(s, rn));
     s->is_jmp = DISAS_JUMP;
 }
 
-- 
1.9.2

[Qemu-devel] [PULL 06/10] target-arm: A64: Fix a typo when declaring TLBI ops

[Peter Maydell]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Harmless typo as opc1 defaults to zero and opc2 gets
re-declared to its correct value.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1398926097-28097-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/helper.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 7823e8c..3be917c 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1908,51 +1908,51 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
       .access = PL1_W, .type = ARM_CP_NOP },
     /* TLBI operations */
     { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 0,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbiall_write },
     { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 1,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_va_write },
     { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 2,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_asid_write },
     { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 3,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_vaa_write },
     { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 5,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_va_write },
     { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 3, .opc2 = 7,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_vaa_write },
     { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 0,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbiall_write },
     { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 1,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_va_write },
     { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 2,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_asid_write },
     { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 3,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_vaa_write },
     { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 5,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_va_write },
     { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64,
-      .opc0 = 1, .opc2 = 0, .crn = 8, .crm = 7, .opc2 = 7,
+      .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7,
       .access = PL1_W, .type = ARM_CP_NO_MIGRATE,
       .writefn = tlbi_aa64_vaa_write },
 #ifndef CONFIG_USER_ONLY
-- 
1.9.2

[Qemu-devel] [PULL 07/10] target-arm: Correct a comment refering to EL0

[Peter Maydell]

From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1398926097-28097-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/op_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
index 57e7d9c..fb90676 100644
--- a/target-arm/op_helper.c
+++ b/target-arm/op_helper.c
@@ -418,7 +418,7 @@ void HELPER(exception_return)(CPUARMState *env)
             goto illegal_return;
         }
         if (new_el == 0 && (spsr & PSTATE_SP)) {
-            /* Return to EL1 with M[0] bit set */
+            /* Return to EL0 with M[0] bit set */
             goto illegal_return;
         }
         env->aarch64 = 1;
-- 
1.9.2

[Qemu-devel] [PULL 08/10] hw/arm/virt: Create the GIC ourselves rather than (ab)using a15mpcore_priv

[Peter Maydell]

Rather than having the virt machine model create an a15mpcore_priv
device regardless of the actual CPU type in order to instantiate the GIC,
move to having the machine model create the GIC directly. This
corresponds to a system which uses a standalone GIC (eg the GIC-400)
rather than the one built in to the CPU core.

The primary motivation for this is to support the Cortex-A57,
which for a KVM configuration will use a GICv2, which is not
built into the CPU.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-2-git-send-email-peter.maydell@linaro.org
---
 hw/arm/virt.c | 82 ++++++++++++++++++++++++++++++++++++++---------------------
 1 file changed, 53 insertions(+), 29 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 2bbc931..ecff256 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -75,8 +75,6 @@ typedef struct MemMapEntry {
 typedef struct VirtBoardInfo {
     struct arm_boot_info bootinfo;
     const char *cpu_model;
-    const char *qdevname;
-    const char *gic_compatible;
     const MemMapEntry *memmap;
     const int *irqmap;
     int smp_cpus;
@@ -117,16 +115,11 @@ static const int a15irqmap[] = {
 static VirtBoardInfo machines[] = {
     {
         .cpu_model = "cortex-a15",
-        .qdevname = "a15mpcore_priv",
-        .gic_compatible = "arm,cortex-a15-gic",
         .memmap = a15memmap,
         .irqmap = a15irqmap,
     },
     {
         .cpu_model = "host",
-        /* We use the A15 private peripheral model to get a V2 GIC */
-        .qdevname = "a15mpcore_priv",
-        .gic_compatible = "arm,cortex-a15-gic",
         .memmap = a15memmap,
         .irqmap = a15irqmap,
     },
@@ -251,8 +244,9 @@ static void fdt_add_gic_node(const VirtBoardInfo *vbi)
     qemu_fdt_setprop_cell(vbi->fdt, "/", "interrupt-parent", gic_phandle);
 
     qemu_fdt_add_subnode(vbi->fdt, "/intc");
+    /* 'cortex-a15-gic' means 'GIC v2' */
     qemu_fdt_setprop_string(vbi->fdt, "/intc", "compatible",
-                                vbi->gic_compatible);
+                            "arm,cortex-a15-gic");
     qemu_fdt_setprop_cell(vbi->fdt, "/intc", "#interrupt-cells", 3);
     qemu_fdt_setprop(vbi->fdt, "/intc", "interrupt-controller", NULL, 0);
     qemu_fdt_setprop_sized_cells(vbi->fdt, "/intc", "reg",
@@ -263,6 +257,56 @@ static void fdt_add_gic_node(const VirtBoardInfo *vbi)
     qemu_fdt_setprop_cell(vbi->fdt, "/intc", "phandle", gic_phandle);
 }
 
+static void create_gic(const VirtBoardInfo *vbi, qemu_irq *pic)
+{
+    /* We create a standalone GIC v2 */
+    DeviceState *gicdev;
+    SysBusDevice *gicbusdev;
+    const char *gictype = "arm_gic";
+    int i;
+
+    if (kvm_irqchip_in_kernel()) {
+        gictype = "kvm-arm-gic";
+    }
+
+    gicdev = qdev_create(NULL, gictype);
+    qdev_prop_set_uint32(gicdev, "revision", 2);
+    qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus);
+    /* Note that the num-irq property counts both internal and external
+     * interrupts; there are always 32 of the former (mandated by GIC spec).
+     */
+    qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32);
+    qdev_init_nofail(gicdev);
+    gicbusdev = SYS_BUS_DEVICE(gicdev);
+    sysbus_mmio_map(gicbusdev, 0, vbi->memmap[VIRT_GIC_DIST].base);
+    sysbus_mmio_map(gicbusdev, 1, vbi->memmap[VIRT_GIC_CPU].base);
+
+    /* Wire the outputs from each CPU's generic timer to the
+     * appropriate GIC PPI inputs, and the GIC's IRQ output to
+     * the CPU's IRQ input.
+     */
+    for (i = 0; i < smp_cpus; i++) {
+        DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
+        int ppibase = NUM_IRQS + i * 32;
+        /* physical timer; we wire it up to the non-secure timer's ID,
+         * since a real A15 always has TrustZone but QEMU doesn't.
+         */
+        qdev_connect_gpio_out(cpudev, 0,
+                              qdev_get_gpio_in(gicdev, ppibase + 30));
+        /* virtual timer */
+        qdev_connect_gpio_out(cpudev, 1,
+                              qdev_get_gpio_in(gicdev, ppibase + 27));
+
+        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+    }
+
+    for (i = 0; i < NUM_IRQS; i++) {
+        pic[i] = qdev_get_gpio_in(gicdev, i);
+    }
+
+    fdt_add_gic_node(vbi);
+}
+
 static void create_uart(const VirtBoardInfo *vbi, qemu_irq *pic)
 {
     char *nodename;
@@ -340,8 +384,6 @@ static void machvirt_init(QEMUMachineInitArgs *args)
     MemoryRegion *sysmem = get_system_memory();
     int n;
     MemoryRegion *ram = g_new(MemoryRegion, 1);
-    DeviceState *dev;
-    SysBusDevice *busdev;
     const char *cpu_model = args->cpu_model;
     VirtBoardInfo *vbi;
 
@@ -404,25 +446,7 @@ static void machvirt_init(QEMUMachineInitArgs *args)
     vmstate_register_ram_global(ram);
     memory_region_add_subregion(sysmem, vbi->memmap[VIRT_MEM].base, ram);
 
-    dev = qdev_create(NULL, vbi->qdevname);
-    qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
-    /* Note that the num-irq property counts both internal and external
-     * interrupts; there are always 32 of the former (mandated by GIC spec).
-     */
-    qdev_prop_set_uint32(dev, "num-irq", NUM_IRQS + 32);
-    qdev_init_nofail(dev);
-    busdev = SYS_BUS_DEVICE(dev);
-    sysbus_mmio_map(busdev, 0, vbi->memmap[VIRT_CPUPERIPHS].base);
-    fdt_add_gic_node(vbi);
-    for (n = 0; n < smp_cpus; n++) {
-        DeviceState *cpudev = DEVICE(qemu_get_cpu(n));
-
-        sysbus_connect_irq(busdev, n, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
-    }
-
-    for (n = 0; n < NUM_IRQS; n++) {
-        pic[n] = qdev_get_gpio_in(dev, n);
-    }
+    create_gic(vbi, pic);
 
     create_uart(vbi, pic);
 
-- 
1.9.2

[Qemu-devel] [PULL 09/10] hw/arm/virt: Put GIC register banks on 64K boundaries

[Peter Maydell]

For an AArch64 CPU which supports 64K pages, having the GIC
register banks at 4K offsets is potentially awkward. Move
them out to being at 64K offsets. (This is harmless for
AArch32 CPUs and for AArch64 CPUs with 4K pages, so it is simpler
to use the same offsets everywhere than to try to use 64K offsets
only for AArch64 host CPUs.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-3-git-send-email-peter.maydell@linaro.org
---
 hw/arm/virt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index ecff256..9c4d337 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -96,10 +96,10 @@ typedef struct VirtBoardInfo {
 static const MemMapEntry a15memmap[] = {
     /* Space up to 0x8000000 is reserved for a boot ROM */
     [VIRT_FLASH] = { 0, 0x8000000 },
-    [VIRT_CPUPERIPHS] = { 0x8000000, 0x8000 },
+    [VIRT_CPUPERIPHS] = { 0x8000000, 0x20000 },
     /* GIC distributor and CPU interfaces sit inside the CPU peripheral space */
-    [VIRT_GIC_DIST] = { 0x8001000, 0x1000 },
-    [VIRT_GIC_CPU] = { 0x8002000, 0x1000 },
+    [VIRT_GIC_DIST] = { 0x8000000, 0x10000 },
+    [VIRT_GIC_CPU] = { 0x8010000, 0x10000 },
     [VIRT_UART] = { 0x9000000, 0x1000 },
     [VIRT_MMIO] = { 0xa000000, 0x200 },
     /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */
-- 
1.9.2

[Qemu-devel] [PULL 10/10] hw/arm/virt: Add support for Cortex-A57

[Peter Maydell]

Support the Cortex-A57 in the virt machine model.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1398362083-17737-4-git-send-email-peter.maydell@linaro.org
---
 hw/arm/virt.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 9c4d337..ea4f02d 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -119,6 +119,11 @@ static VirtBoardInfo machines[] = {
         .irqmap = a15irqmap,
     },
     {
+        .cpu_model = "cortex-a57",
+        .memmap = a15memmap,
+        .irqmap = a15irqmap,
+    },
+    {
         .cpu_model = "host",
         .memmap = a15memmap,
         .irqmap = a15irqmap,
-- 
1.9.2

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On 1 May 2014 15:54, Peter Maydell <peter.maydell@linaro.org> wrote:
> Nothing earthshattering here, but it does have the patch which
> actually lets us boot an emulated AArch64 CPU on a board...
>
> thanks
> -- PMM
>
> The following changes since commit 051b9980b99dbfba22ea5f79bd3708d513ae121d:
>
>   Merge remote-tracking branch 'remotes/kraxel/tags/pull-gtk-6' into staging (2014-05-01 14:17:33 +0100)
>
> are available in the git repository at:
>
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20140501
>
> for you to fetch changes up to f42c5c8ec8aa0e15583487ffee62964830751623:
>
>   hw/arm/virt: Add support for Cortex-A57 (2014-05-01 15:25:52 +0100)

Applied, thanks.

-- PMM

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Richard W.M. Jones]

On Thu, May 01, 2014 at 03:54:57PM +0100, Peter Maydell wrote:
> Nothing earthshattering here, but it does have the patch which
> actually lets us boot an emulated AArch64 CPU on a board...

Hi Peter,

I have real aarch64 hardware, and I'm trying to find a version of
qemu-system-aarch64 which will boot a KVM guest in some form.

Upstream qemu fails with a bizarre thread-local storage problem (yes,
I've patched glibc to fix the makecontext problem).

Is there a qemu tree I should be looking at?

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-p2v converts physical machines to virtual machines.  Boot with a
live CD or over the network (PXE) and turn machines into KVM guests.
http://libguestfs.org/virt-v2v

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On 4 May 2014 19:30, Richard W.M. Jones <rjones@redhat.com> wrote:
> I have real aarch64 hardware, and I'm trying to find a version of
> qemu-system-aarch64 which will boot a KVM guest in some form.
>
> Upstream qemu fails with a bizarre thread-local storage problem (yes,
> I've patched glibc to fix the makecontext problem).
>
> Is there a qemu tree I should be looking at?

Upstream is it. I haven't been testing it for a while though; it's possible
it bitrotted while I wasn't looking.

thanks
-- PMM

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Richard W.M. Jones]

On Sun, May 04, 2014 at 07:48:38PM +0100, Peter Maydell wrote:
> On 4 May 2014 19:30, Richard W.M. Jones <rjones@redhat.com> wrote:
> > I have real aarch64 hardware, and I'm trying to find a version of
> > qemu-system-aarch64 which will boot a KVM guest in some form.
> >
> > Upstream qemu fails with a bizarre thread-local storage problem (yes,
> > I've patched glibc to fix the makecontext problem).
> >
> > Is there a qemu tree I should be looking at?
> 
> Upstream is it. I haven't been testing it for a while though; it's possible
> it bitrotted while I wasn't looking.

OK, it might be a kernel problem then.

This was the issue I was having before:

/home/rjones/d/qemu/aarch64-softmmu/qemu-system-aarch64 \
    -global virtio-blk-device.scsi=off \
    -nodefconfig \
    -enable-fips \
    -nodefaults \
    -display none \
    -M virt \
    -machine accel=kvm:tcg \
    -m 500 \
    -no-reboot \
    -rtc driftfix=slew \
    -global kvm-pit.lost_tick_policy=discard \
    -kernel /home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/kernel \
    -initrd /home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/initrd \
    -device virtio-scsi-device,id=scsi \
    -drive file=/home/rjones/d/libguestfs/tmp/libguestfsHRi4Tt/scratch.1,cache=unsafe,format=raw,id=hd0,if=none \
    -device scsi-hd,drive=hd0 \
    -drive file=/home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/root,snapshot=on,id=appliance,cache=unsafe,if=none \
    -device scsi-hd,drive=appliance \
    -device virtio-serial-device \
    -serial stdio \
    -chardev socket,path=/home/rjones/d/libguestfs/tmp/libguestfsHRi4Tt/guestfsd.sock,id=channel0 \
    -device virtserialport,chardev=channel0,name=org.libguestfs.channel.0 \
    -append 'panic=1 console=ttyS0 udevtimeout=600 no_timer_check acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=screen'
Could not access KVM kernel module: Permission denied
failed to initialize KVM: Permission denied
Back to tcg accelerator.
libguestfs: error: appliance closed the connection unexpectedly, see earlier error messages
libguestfs: child_cleanup: 0x3b5a1770: child process died
libguestfs: sending SIGTERM to process 12438
libguestfs: error: /home/rjones/d/qemu/aarch64-softmmu/qemu-system-aarch64 killed by signal 11 (Segmentation fault), see debug messages above

The stack trace in qemu when the segfault occurs is:

Program terminated with signal SIGSEGV, Segmentation fault.
#0  0x000002aae2f17394 in cpu_arm_exec (env=0x3ff8401eed0, 
    env@entry=0x2ab1c978440) at /home/rjones/d/qemu/cpu-exec.c:241
241         current_cpu = cpu;

(gdb) print tls__current_cpu 
Cannot find thread-local storage for LWP 12922, executable file /home/rjones/d/qemu/aarch64-softmmu/qemu-system-aarch64:
TLS not supported on this target

... and ^^^ that's the part that makes no sense to me.  TLS must
surely be supported, so there must be something odd about the
compile-time environment.

Linux ***.redhat.com 3.13.0-0.rc7.31.***.aarch64.debug #1 SMP Fri May 2 16:55:22 EDT 2014 aarch64 aarch64 aarch64 GNU/Linux

glibc-2.19.90-11.fc21.aarch64
gcc-4.9.0-1.fc21.aarch64

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine.  Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Richard W.M. Jones]

I think this problem comes from my environment adding -fPIE.

In any case, without that flag it doesn't crash in qemu (it
kernel panics instead ..)


Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
libguestfs lets you edit virtual machines.  Supports shell scripting,
bindings from many languages.  http://libguestfs.org

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On 4 May 2014 19:58, Richard W.M. Jones <rjones@redhat.com> wrote:
> On Sun, May 04, 2014 at 07:48:38PM +0100, Peter Maydell wrote:
>> On 4 May 2014 19:30, Richard W.M. Jones <rjones@redhat.com> wrote:
>> > I have real aarch64 hardware, and I'm trying to find a version of
>> > qemu-system-aarch64 which will boot a KVM guest in some form.
>> >
>> > Upstream qemu fails with a bizarre thread-local storage problem (yes,
>> > I've patched glibc to fix the makecontext problem).
>> >
>> > Is there a qemu tree I should be looking at?
>>
>> Upstream is it. I haven't been testing it for a while though; it's possible
>> it bitrotted while I wasn't looking.
>
> OK, it might be a kernel problem then.
>
> This was the issue I was having before:
>
> /home/rjones/d/qemu/aarch64-softmmu/qemu-system-aarch64 \
>     -global virtio-blk-device.scsi=off \
>     -nodefconfig \
>     -enable-fips \
>     -nodefaults \
>     -display none \
>     -M virt \
>     -machine accel=kvm:tcg \
>     -m 500 \
>     -no-reboot \
>     -rtc driftfix=slew \
>     -global kvm-pit.lost_tick_policy=discard \
>     -kernel /home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/kernel \
>     -initrd /home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/initrd \
>     -device virtio-scsi-device,id=scsi \
>     -drive file=/home/rjones/d/libguestfs/tmp/libguestfsHRi4Tt/scratch.1,cache=unsafe,format=raw,id=hd0,if=none \
>     -device scsi-hd,drive=hd0 \
>     -drive file=/home/rjones/d/libguestfs/tmp/.guestfs-1000/appliance.d/root,snapshot=on,id=appliance,cache=unsafe,if=none \
>     -device scsi-hd,drive=appliance \
>     -device virtio-serial-device \
>     -serial stdio \
>     -chardev socket,path=/home/rjones/d/libguestfs/tmp/libguestfsHRi4Tt/guestfsd.sock,id=channel0 \
>     -device virtserialport,chardev=channel0,name=org.libguestfs.channel.0 \
>     -append 'panic=1 console=ttyS0 udevtimeout=600 no_timer_check acpi=off printk.time=1 cgroup_disable=memory root=/dev/sdb selinux=0 guestfs_verbose=1 TERM=screen'
> Could not access KVM kernel module: Permission denied
> failed to initialize KVM: Permission denied
> Back to tcg accelerator.

OK, so you have a kernel (possibly just kernel config) problem
here -- this means QEMU got EPERM trying to open /dev/kvm.
This isn't going to work for aarch64 at the moment because:
 * KVM aarch64 currently requires '-cpu host'
 * '-cpu host' is a KVM only thing that won't work with TCG
If you don't enable KVM we don't put 'host' in the CPU list
so usually the TCG code can't see it -- however "use KVM
but have the init fail" is a path I hadn't considered for getting
into TCG with -cpu host.

Does this happen if you start with accel=tcg so we're using
TCG all the way through?

You can also ignore all this in favour of just figuring out why
your kernel didn't let us open /dev/kvm...

PS: I didn't see a "-cpu something" in your command line;
I forget what the default is but it's probably not what you want.

> libguestfs: error: appliance closed the connection unexpectedly, see earlier error messages
> libguestfs: child_cleanup: 0x3b5a1770: child process died
> libguestfs: sending SIGTERM to process 12438
> libguestfs: error: /home/rjones/d/qemu/aarch64-softmmu/qemu-system-aarch64 killed by signal 11 (Segmentation fault), see debug messages above
>
> The stack trace in qemu when the segfault occurs is:
>
> Program terminated with signal SIGSEGV, Segmentation fault.
> #0  0x000002aae2f17394 in cpu_arm_exec (env=0x3ff8401eed0,
>     env@entry=0x2ab1c978440) at /home/rjones/d/qemu/cpu-exec.c:241
> 241         current_cpu = cpu;
>
> (gdb) print tls__current_cpu
> Cannot find thread-local storage for LWP 12922, executable file /home/rjones/d/qemu/aarch64-softmmu/qemu-system-aarch64:
> TLS not supported on this target
>
> ... and ^^^ that's the part that makes no sense to me.  TLS must
> surely be supported, so there must be something odd about the
> compile-time environment.

I think that message is gdb saying that it doesn't support TLS,
not that the target architecture doesn't support TLS. How ancient
is your gdb? Google suggests that TLS support went into the
aarch64 target somewhat after the initial architecture support
(though still a year or so ago, so I would have expected it to get in...)

thanks
-- PMM

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Richard W.M. Jones]

On Sun, May 04, 2014 at 08:36:20PM +0100, Peter Maydell wrote:
> OK, so you have a kernel (possibly just kernel config) problem
> here -- this means QEMU got EPERM trying to open /dev/kvm.

Yes for some reason it was 0600.  I set it to 0666.

> This isn't going to work for aarch64 at the moment because:
>  * KVM aarch64 currently requires '-cpu host'

OK -- I will play with libguestfs to make sure it passes this flag,
and try again.  Currently waiting for the host (which has panicked
again) to be rebooted manually.

Thanks again,

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine.  Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On 4 May 2014 20:45, Richard W.M. Jones <rjones@redhat.com> wrote:
> On Sun, May 04, 2014 at 08:36:20PM +0100, Peter Maydell wrote:
>> OK, so you have a kernel (possibly just kernel config) problem
>> here -- this means QEMU got EPERM trying to open /dev/kvm.
>
> Yes for some reason it was 0600.  I set it to 0666.
>
>> This isn't going to work for aarch64 at the moment because:
>>  * KVM aarch64 currently requires '-cpu host'
>
> OK -- I will play with libguestfs to make sure it passes this flag,
> and try again.

It should in theory be possible to get -cpu cortex-a57 to
work (though I haven't tried it so it's likely missing something
trivial); however that will only work if your host CPU is
actually a Cortex-A57. For any other host you'll need
-cpu host.

> Currently waiting for the host (which has panicked
> again) to be rebooted manually.

If your host has panicked that's a kernel bug :-) (or possibly
a hardware bug if you're unlucky). If it does so reproducibly
when you prod it with QEMU then you should probably retest
with a recent kernel and report it to the kvm-arm mailing list.

thanks
-- PMM

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[no-reply]

Patchew URL: https://patchew.org/QEMU/20190715134211.23063-1-peter.maydell@linaro.org/



Hi,

This series seems to have some coding style problems. See output below for
more information:

Type: series
Subject: [Qemu-devel] [PULL 00/10] target-arm queue
Message-id: 20190715134211.23063-1-peter.maydell@linaro.org

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

From https://github.com/patchew-project/qemu
 * [new tag]         patchew/20190715134211.23063-1-peter.maydell@linaro.org -> patchew/20190715134211.23063-1-peter.maydell@linaro.org
Switched to a new branch 'test'
374fdb9 target/arm: NS BusFault on vector table fetch escalates to NS HardFault
a30b1da target/arm: Set VFP-related MVFR0 fields for arm926 and arm1026
6d70517 pl031: Correctly migrate state when using -rtc clock=host
93d5845 hw/arm/virt: Fix non-secure flash mode
08594d9 hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO
d4bfee6 hw/ssi/mss-spi: Avoid crash when reading empty RX FIFO
521dcfc hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[]
28dc994 hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memory
33d10d3 hw/ssi/xilinx_spips: Convert lqspi_read() to read_with_attrs
4ad540c target/arm: report ARMv8-A FP support for AArch32 -cpu max

=== OUTPUT BEGIN ===
1/10 Checking commit 4ad540cb003f (target/arm: report ARMv8-A FP support for AArch32 -cpu max)
2/10 Checking commit 33d10d39bd1e (hw/ssi/xilinx_spips: Convert lqspi_read() to read_with_attrs)
3/10 Checking commit 28dc994a8771 (hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memory)
4/10 Checking commit 521dcfc62131 (hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[])
5/10 Checking commit d4bfee6403a6 (hw/ssi/mss-spi: Avoid crash when reading empty RX FIFO)
6/10 Checking commit 08594d9831b4 (hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO)
7/10 Checking commit 93d58455baf6 (hw/arm/virt: Fix non-secure flash mode)
8/10 Checking commit 6d7051773f27 (pl031: Correctly migrate state when using -rtc clock=host)
ERROR: spaces required around that '*' (ctx:VxV)
#158: FILE: hw/timer/pl031.c:300:
+    .subsections = (const VMStateDescription*[]) {
                                             ^

total: 1 errors, 0 warnings, 146 lines checked

Patch 8/10 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

9/10 Checking commit a30b1dad815c (target/arm: Set VFP-related MVFR0 fields for arm926 and arm1026)
10/10 Checking commit 374fdb936ee9 (target/arm: NS BusFault on vector table fetch escalates to NS HardFault)
=== OUTPUT END ===

Test command exited with code: 1


The full log is available at
http://patchew.org/logs/20190715134211.23063-1-peter.maydell@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[no-reply]

Patchew URL: https://patchew.org/QEMU/20190715134211.23063-1-peter.maydell@linaro.org/



Hi,

This series seems to have some coding style problems. See output below for
more information:

Message-id: 20190715134211.23063-1-peter.maydell@linaro.org
Type: series
Subject: [Qemu-devel] [PULL 00/10] target-arm queue

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

From https://github.com/patchew-project/qemu
 * [new tag]               patchew/20190715134211.23063-1-peter.maydell@linaro.org -> patchew/20190715134211.23063-1-peter.maydell@linaro.org
Switched to a new branch 'test'
374fdb936e target/arm: NS BusFault on vector table fetch escalates to NS HardFault
a30b1dad81 target/arm: Set VFP-related MVFR0 fields for arm926 and arm1026
6d7051773f pl031: Correctly migrate state when using -rtc clock=host
93d58455ba hw/arm/virt: Fix non-secure flash mode
08594d9831 hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO
d4bfee6403 hw/ssi/mss-spi: Avoid crash when reading empty RX FIFO
521dcfc621 hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[]
28dc994a87 hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memory
33d10d39bd hw/ssi/xilinx_spips: Convert lqspi_read() to read_with_attrs
4ad540cb00 target/arm: report ARMv8-A FP support for AArch32 -cpu max

=== OUTPUT BEGIN ===
1/10 Checking commit 4ad540cb003f (target/arm: report ARMv8-A FP support for AArch32 -cpu max)
2/10 Checking commit 33d10d39bd1e (hw/ssi/xilinx_spips: Convert lqspi_read() to read_with_attrs)
3/10 Checking commit 28dc994a8771 (hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memory)
4/10 Checking commit 521dcfc62131 (hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[])
5/10 Checking commit d4bfee6403a6 (hw/ssi/mss-spi: Avoid crash when reading empty RX FIFO)
6/10 Checking commit 08594d9831b4 (hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO)
7/10 Checking commit 93d58455baf6 (hw/arm/virt: Fix non-secure flash mode)
8/10 Checking commit 6d7051773f27 (pl031: Correctly migrate state when using -rtc clock=host)
ERROR: spaces required around that '*' (ctx:VxV)
#158: FILE: hw/timer/pl031.c:300:
+    .subsections = (const VMStateDescription*[]) {
                                             ^

total: 1 errors, 0 warnings, 146 lines checked

Patch 8/10 has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

9/10 Checking commit a30b1dad815c (target/arm: Set VFP-related MVFR0 fields for arm926 and arm1026)
10/10 Checking commit 374fdb936ee9 (target/arm: NS BusFault on vector table fetch escalates to NS HardFault)
=== OUTPUT END ===

Test command exited with code: 1


The full log is available at
http://patchew.org/logs/20190715134211.23063-1-peter.maydell@linaro.org/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On Mon, 15 Jul 2019 at 14:42, Peter Maydell <peter.maydell@linaro.org> wrote:
>
> target-arm queue for rc1 -- these are all bug fixes.
>
> thanks
> -- PMM
>
> The following changes since commit b9404bf592e7ba74180e1a54ed7a266ec6ee67f2:
>
>   Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20190715' into staging (2019-07-15 12:22:07 +0100)
>
> are available in the Git repository at:
>
>   https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190715
>
> for you to fetch changes up to 51c9122e92b776a3f16af0b9282f1dc5012e2a19:
>
>   target/arm: NS BusFault on vector table fetch escalates to NS HardFault (2019-07-15 14:17:04 +0100)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * report ARMv8-A FP support for AArch32 -cpu max
>  * hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memory
>  * hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[]
>  * hw/ssi/mss-spi: Avoid crash when reading empty RX FIFO
>  * hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO
>  * hw/arm/virt: Fix non-secure flash mode
>  * pl031: Correctly migrate state when using -rtc clock=host
>  * fix regression that meant arm926 and arm1026 lost VFP
>    double-precision support
>  * v8M: NS BusFault on vector table fetch escalates to NS HardFault
>


Applied, thanks.

Please update the changelog at https://wiki.qemu.org/ChangeLog/4.1
for any user-visible changes.

-- PMM

[Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

target-arm queue for rc1 -- these are all bug fixes.

thanks
-- PMM

The following changes since commit b9404bf592e7ba74180e1a54ed7a266ec6ee67f2:

  Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20190715' into staging (2019-07-15 12:22:07 +0100)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190715

for you to fetch changes up to 51c9122e92b776a3f16af0b9282f1dc5012e2a19:

  target/arm: NS BusFault on vector table fetch escalates to NS HardFault (2019-07-15 14:17:04 +0100)

----------------------------------------------------------------
target-arm queue:
 * report ARMv8-A FP support for AArch32 -cpu max
 * hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memory
 * hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[]
 * hw/ssi/mss-spi: Avoid crash when reading empty RX FIFO
 * hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO
 * hw/arm/virt: Fix non-secure flash mode
 * pl031: Correctly migrate state when using -rtc clock=host
 * fix regression that meant arm926 and arm1026 lost VFP
   double-precision support
 * v8M: NS BusFault on vector table fetch escalates to NS HardFault

----------------------------------------------------------------
Alex Bennée (1):
      target/arm: report ARMv8-A FP support for AArch32 -cpu max

David Engraf (1):
      hw/arm/virt: Fix non-secure flash mode

Peter Maydell (3):
      pl031: Correctly migrate state when using -rtc clock=host
      target/arm: Set VFP-related MVFR0 fields for arm926 and arm1026
      target/arm: NS BusFault on vector table fetch escalates to NS HardFault

Philippe Mathieu-Daudé (5):
      hw/ssi/xilinx_spips: Convert lqspi_read() to read_with_attrs
      hw/ssi/xilinx_spips: Avoid AXI writes to the LQSPI linear memory
      hw/ssi/xilinx_spips: Avoid out-of-bound access to lqspi_buf[]
      hw/ssi/mss-spi: Avoid crash when reading empty RX FIFO
      hw/display/xlnx_dp: Avoid crash when reading empty RX FIFO

 include/hw/timer/pl031.h |  2 ++
 hw/arm/virt.c            |  2 +-
 hw/core/machine.c        |  1 +
 hw/display/xlnx_dp.c     | 15 +++++---
 hw/ssi/mss-spi.c         |  8 ++++-
 hw/ssi/xilinx_spips.c    | 43 +++++++++++++++-------
 hw/timer/pl031.c         | 92 +++++++++++++++++++++++++++++++++++++++++++++---
 target/arm/cpu.c         | 16 +++++++++
 target/arm/m_helper.c    | 21 ++++++++---
 9 files changed, 174 insertions(+), 26 deletions(-)

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On 19 November 2018 at 15:57, Peter Maydell <peter.maydell@linaro.org> wrote:
> Some Arm bugfixes for rc2...
>
> thanks
> -- PMM
>
> The following changes since commit e6ebbd46b6e539f3613136111977721d212c2812:
>
>   Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2018-11-19 14:31:48 +0000)
>
> are available in the Git repository at:
>
>   https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20181119
>
> for you to fetch changes up to a00d7f2048c2a1a6a4487ac195c804c78adcf60e:
>
>   MAINTAINERS: list myself as maintainer for various Arm boards (2018-11-19 15:55:11 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * various MAINTAINERS file updates
>  * hw/block/onenand: use qemu_log_mask() for reporting
>  * hw/block/onenand: Fix off-by-one error allowing out-of-bounds read
>    on the n800 and n810 machine models
>  * target/arm: fix smc incorrectly trapping to EL3 when secure is off
>  * hw/arm/stm32f205: Fix the UART and Timer region size
>  * target/arm: read ID registers for KVM guests so they can be
>    used to gate "is feature X present" checks
>
> ----------------------------------------------------------------

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

Some Arm bugfixes for rc2...

thanks
-- PMM

The following changes since commit e6ebbd46b6e539f3613136111977721d212c2812:

  Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging (2018-11-19 14:31:48 +0000)

are available in the Git repository at:

  https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20181119

for you to fetch changes up to a00d7f2048c2a1a6a4487ac195c804c78adcf60e:

  MAINTAINERS: list myself as maintainer for various Arm boards (2018-11-19 15:55:11 +0000)

----------------------------------------------------------------
target-arm queue:
 * various MAINTAINERS file updates
 * hw/block/onenand: use qemu_log_mask() for reporting
 * hw/block/onenand: Fix off-by-one error allowing out-of-bounds read
   on the n800 and n810 machine models
 * target/arm: fix smc incorrectly trapping to EL3 when secure is off
 * hw/arm/stm32f205: Fix the UART and Timer region size
 * target/arm: read ID registers for KVM guests so they can be
   used to gate "is feature X present" checks

----------------------------------------------------------------
Luc Michel (1):
      target/arm: fix smc incorrectly trapping to EL3 when secure is off

Peter Maydell (3):
      hw/block/onenand: Fix off-by-one error allowing out-of-bounds read
      hw/block/onenand: use qemu_log_mask() for reporting
      MAINTAINERS: list myself as maintainer for various Arm boards

Richard Henderson (4):
      target/arm: Install ARMISARegisters from kvm host
      target/arm: Fill in ARMISARegisters for kvm64
      target/arm: Introduce read_sys_reg32 for kvm32
      target/arm: Fill in ARMISARegisters for kvm32

Seth Kintigh (1):
      hw/arm/stm32f205: Fix the UART and Timer region size

Thomas Huth (1):
      MAINTAINERS: Add entries for missing ARM boards

 target/arm/kvm_arm.h       |   1 +
 hw/block/onenand.c         |  24 +++++-----
 hw/char/stm32f2xx_usart.c  |   2 +-
 hw/timer/stm32f2xx_timer.c |   2 +-
 target/arm/kvm.c           |   1 +
 target/arm/kvm32.c         |  77 ++++++++++++++++++++------------
 target/arm/kvm64.c         |  90 +++++++++++++++++++++++++++++++++++++-
 target/arm/op_helper.c     |  54 +++++++++++++++++++----
 MAINTAINERS                | 106 +++++++++++++++++++++++++++++++++++++++------
 9 files changed, 293 insertions(+), 64 deletions(-)

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On 23 March 2018 at 18:49, Peter Maydell <peter.maydell@linaro.org> wrote:
> Ten arm-related bug fixes for 2.12...
>
> thanks
> -- PMM
>
> The following changes since commit 4c2c1015905fa1d616750dfe024b4c0b35875950:
>
>   Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20180323' into staging (2018-03-23 10:20:54 +0000)
>
> are available in the Git repository at:
>
>   git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180323
>
> for you to fetch changes up to 548f514cf89dd9ab39c0cb4c063097bccf141fdd:
>
>   target/arm: Always set FAR to a known unknown value for debug exceptions (2018-03-23 18:26:46 +0000)
>
> ----------------------------------------------------------------
> target-arm queue:
>  * arm/translate-a64: don't lose interrupts after unmasking via write to DAIF
>  * sdhci: fix incorrect use of Error *
>  * hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
>  * hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15
>  * i.MX: Support serial RS-232 break properly
>  * mach-virt: Set VM's SMBIOS system version to mc->name
>  * target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK
>  * target/arm: Factor out code to calculate FSR for debug exceptions
>  * target/arm: Set FSR for BKPT, BRK when raising exception
>  * target/arm: Always set FAR to a known unknown value for debug exceptions
>

Applied, thanks.

-- PMM

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[no-reply]

Hi,

This series seems to have some coding style problems. See output below for
more information:

Type: series
Message-id: 20180323184958.14252-1-peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 00/10] target-arm queue

=== TEST SCRIPT BEGIN ===
#!/bin/bash

BASE=base
n=1
total=$(git log --oneline $BASE.. | wc -l)
failed=0

git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram

commits="$(git log --format=%H --reverse $BASE..)"
for c in $commits; do
    echo "Checking PATCH $n/$total: $(git log -n 1 --format=%s $c)..."
    if ! git show $c --format=email | ./scripts/checkpatch.pl --mailback -; then
        failed=1
        echo
    fi
    n=$((n+1))
done

exit $failed
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
e4250a6575 target/arm: Always set FAR to a known unknown value for debug exceptions
5f8ad1e5dc target/arm: Set FSR for BKPT, BRK when raising exception
1f8698e782 target/arm: Factor out code to calculate FSR for debug exceptions
01c3c783a2 target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK
6fdd8ed47e mach-virt: Set VM's SMBIOS system version to mc->name
4c27421e3d i.MX: Support serial RS-232 break properly
541bf9ad10 hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15
4ba4d6edd9 hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
c5d1bc28c0 sdhci: fix incorrect use of Error *
c8c419d13c arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXIT

=== OUTPUT BEGIN ===
Checking PATCH 1/10: arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXIT...
Checking PATCH 2/10: sdhci: fix incorrect use of Error *...
Checking PATCH 3/10: hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses...
Checking PATCH 4/10: hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15...
Checking PATCH 5/10: i.MX: Support serial RS-232 break properly...
ERROR: spaces required around that '<<' (ctx:VxV)
#56: FILE: include/hw/char/imx_serial.h:29:
+#define URXD_FRMERR     (1<<12)   /* Character has frame error */
                           ^

total: 1 errors, 0 warnings, 24 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Checking PATCH 6/10: mach-virt: Set VM's SMBIOS system version to mc->name...
Checking PATCH 7/10: target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK...
Checking PATCH 8/10: target/arm: Factor out code to calculate FSR for debug exceptions...
Checking PATCH 9/10: target/arm: Set FSR for BKPT, BRK when raising exception...
Checking PATCH 10/10: target/arm: Always set FAR to a known unknown value for debug exceptions...
=== OUTPUT END ===

Test command exited with code: 1


---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org

[Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

Ten arm-related bug fixes for 2.12...

thanks
-- PMM

The following changes since commit 4c2c1015905fa1d616750dfe024b4c0b35875950:

  Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20180323' into staging (2018-03-23 10:20:54 +0000)

are available in the Git repository at:

  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20180323

for you to fetch changes up to 548f514cf89dd9ab39c0cb4c063097bccf141fdd:

  target/arm: Always set FAR to a known unknown value for debug exceptions (2018-03-23 18:26:46 +0000)

----------------------------------------------------------------
target-arm queue:
 * arm/translate-a64: don't lose interrupts after unmasking via write to DAIF
 * sdhci: fix incorrect use of Error *
 * hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
 * hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15
 * i.MX: Support serial RS-232 break properly
 * mach-virt: Set VM's SMBIOS system version to mc->name
 * target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK
 * target/arm: Factor out code to calculate FSR for debug exceptions
 * target/arm: Set FSR for BKPT, BRK when raising exception
 * target/arm: Always set FAR to a known unknown value for debug exceptions

----------------------------------------------------------------
Paolo Bonzini (1):
      sdhci: fix incorrect use of Error *

Peter Maydell (6):
      hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses
      hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15
      target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK
      target/arm: Factor out code to calculate FSR for debug exceptions
      target/arm: Set FSR for BKPT, BRK when raising exception
      target/arm: Always set FAR to a known unknown value for debug exceptions

Trent Piepho (1):
      i.MX: Support serial RS-232 break properly

Victor Kamensky (1):
      arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXIT

Wei Huang (1):
      mach-virt: Set VM's SMBIOS system version to mc->name

 include/hw/arm/virt.h        |  1 +
 include/hw/char/imx_serial.h |  1 +
 target/arm/helper.h          |  1 +
 target/arm/internals.h       | 25 +++++++++++++++++++++++++
 hw/arm/bcm2836.c             |  2 +-
 hw/arm/raspi.c               |  2 +-
 hw/arm/virt.c                |  8 +++++++-
 hw/char/imx_serial.c         |  5 ++++-
 hw/intc/arm_gicv3_cpuif.c    |  6 +++---
 hw/sd/sdhci.c                |  4 ++--
 target/arm/helper.c          |  1 -
 target/arm/op_helper.c       | 33 ++++++++++++++++++++++-----------
 target/arm/translate-a64.c   | 21 ++++++++++++++++-----
 target/arm/translate.c       | 19 ++++++++++++++-----
 14 files changed, 98 insertions(+), 31 deletions(-)

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

On 11 March 2015 at 14:18, Peter Maydell <peter.maydell@linaro.org> wrote:
> target-arm queue: mostly bug fixes, but also the Netduino 2
> machine model. I'm letting that in (even though it's nearly
> hardfreeze) since a new board model isn't going to impact
> other existing uses, and the patches were posted well before
> softfreeze deadline.

Applied, thanks.

PS: if you see "unknown device" failures in make check, this
is a bug in our makefile/dependency generation stuff (currently
being worked on). The workaround is to
 rm $BUILD_TREE/*/config-devices.mak

-- PMM

[Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

target-arm queue: mostly bug fixes, but also the Netduino 2
machine model. I'm letting that in (even though it's nearly
hardfreeze) since a new board model isn't going to impact
other existing uses, and the patches were posted well before
softfreeze deadline.

-- PMM


The following changes since commit 48412371415a260d00fc7fdcdb400da55f268828:

  Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging (2015-03-11 11:12:35 +0000)

are available in the git repository at:


  git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20150311

for you to fetch changes up to 4f9950520a115acf9c0a209f0befa45758ad0215:

  bitops.h: sextract64() return type should be int64_t, not uint64_t (2015-03-11 13:21:06 +0000)

----------------------------------------------------------------
target-arm queue:
 * fix a bug in bitops.h
 * implement SD card support on integratorcp
 * add a missing 'compatible' property for Cortex-A57
 * add Netduino 2 machine model
 * fix command line parsing bug for CPU options with multiple CPUs

----------------------------------------------------------------
Alistair Francis (5):
      stm32f2xx_timer: Add the stm32f2xx Timer
      stm32f2xx_USART: Add the stm32f2xx USART Controller
      stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFG
      stm32f205: Add the stm32f205 SoC
      netduino2: Add the Netduino 2 Machine

Ard Biesheuvel (1):
      hw/arm/virt: fix cmdline parsing bug with CPU options and smp > 1

Jan Kiszka (2):
      integrator/cp: Model CP control registers as sysbus device
      integrator/cp: Implement CARDIN and WPROT signals

Peter Maydell (1):
      bitops.h: sextract64() return type should be int64_t, not uint64_t

Ryota Ozaki (1):
      target-arm: Add missing compatible property to A57

 default-configs/arm-softmmu.mak    |   4 +
 hw/arm/Makefile.objs               |   2 +
 hw/arm/integratorcp.c              |  95 +++++++++--
 hw/arm/netduino2.c                 |  57 +++++++
 hw/arm/stm32f205_soc.c             | 160 ++++++++++++++++++
 hw/arm/virt.c                      |   4 +-
 hw/char/Makefile.objs              |   1 +
 hw/char/stm32f2xx_usart.c          | 229 ++++++++++++++++++++++++++
 hw/misc/Makefile.objs              |   1 +
 hw/misc/stm32f2xx_syscfg.c         | 160 ++++++++++++++++++
 hw/timer/Makefile.objs             |   2 +
 hw/timer/stm32f2xx_timer.c         | 328 +++++++++++++++++++++++++++++++++++++
 include/hw/arm/stm32f205_soc.h     |  57 +++++++
 include/hw/char/stm32f2xx_usart.h  |  73 +++++++++
 include/hw/misc/stm32f2xx_syscfg.h |  61 +++++++
 include/hw/timer/stm32f2xx_timer.h | 101 ++++++++++++
 include/qemu/bitops.h              |   2 +-
 target-arm/cpu64.c                 |   1 +
 18 files changed, 1323 insertions(+), 15 deletions(-)
 create mode 100644 hw/arm/netduino2.c
 create mode 100644 hw/arm/stm32f205_soc.c
 create mode 100644 hw/char/stm32f2xx_usart.c
 create mode 100644 hw/misc/stm32f2xx_syscfg.c
 create mode 100644 hw/timer/stm32f2xx_timer.c
 create mode 100644 include/hw/arm/stm32f205_soc.h
 create mode 100644 include/hw/char/stm32f2xx_usart.h
 create mode 100644 include/hw/misc/stm32f2xx_syscfg.h
 create mode 100644 include/hw/timer/stm32f2xx_timer.h

Re: [Qemu-devel] [PULL 00/10] target-arm queue

[andrzej zaborowski]

On 13 December 2011 19:30, Peter Maydell <peter.maydell@linaro.org> wrote:
> Current target-arm pending patches; mostly these are Andreas'
> inference series, plus one from Jean-Christophe that's been
> waiting since before the 1.0 release.
>
> Please pull.

Thanks, pulled (and pushed)

Cheers

[Qemu-devel] [PULL 00/10] target-arm queue

[Peter Maydell]

Current target-arm pending patches; mostly these are Andreas'
inference series, plus one from Jean-Christophe that's been
waiting since before the 1.0 release.

Please pull.

-- PMM

The following changes since commit da5361cc685c004d8bb4e7c5e7b3a52c7aca2c56:

  ccid: make threads joinable (2011-12-12 17:06:22 -0600)

are available in the git repository at:
  git://git.linaro.org/people/pmaydell/qemu-arm.git target-arm.for-upstream

Andreas Färber (9):
      target-arm: Infer ARMv4T feature from ARMv5
      target-arm: Infer ARMv5 feature from ARMv6
      target-arm: Infer ARMv6 feature from v6K
      target-arm: Infer ARMv6(K) feature from ARMv7
      target-arm: Infer AUXCR feature from ARMv6
      target-arm: Infer Thumb2 feature from ARMv7
      target-arm: Infer Thumb division feature from M profile
      target-arm: Infer VFP feature from VFPv3
      target-arm: Infer VFPv3 feature from VFPv4

Jean-Christophe DUBOIS (1):
      arm: Fix CP15 FSR (C5) domain setting

 target-arm/helper.c |   95 ++++++++++++++++++++++----------------------------
 1 files changed, 42 insertions(+), 53 deletions(-)