All of lore.kernel.org
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@kernel.org>,
	Mike Turquette <mturquette@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Doug Anderson <dianders@chromium.org>,
	Olof Johansson <olof@lixom.net>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Yadwinder Singh Brar <yadi.brar01@gmail.com>,
	Tushar Behera <trblinux@gmail.com>,
	Andreas Farber <afaerber@suse.de>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR.
Date: Fri,  4 Jul 2014 22:24:13 +0200	[thread overview]
Message-ID: <1404505467-26526-11-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1404505467-26526-1-git-send-email-javier.martinez@collabora.co.uk>

The MAX77686 RTC chip has two features called SMPL (Sudden Momentary
Power Loss) and WTSR (Watchdog Timeout and Software Resets).
Support for these features seems to be implemented in the driver but
compilation is disabled using a C pre-processor conditional.

This code has been disabled since the driver was original merged in
commit fca1dd03 ("rtc: max77686: add Maxim 77686 driver").

So, since this code has never been built, let's just remove it.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
 drivers/rtc/rtc-max77686.c | 101 ---------------------------------------------
 1 file changed, 101 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index c1c6055..7bb5433 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -32,15 +32,6 @@
 #define RTC_UDR_MASK			(1 << RTC_UDR_SHIFT)
 #define RTC_RBUDR_SHIFT			4
 #define RTC_RBUDR_MASK			(1 << RTC_RBUDR_SHIFT)
-/* WTSR and SMPL Register */
-#define WTSRT_SHIFT			0
-#define SMPLT_SHIFT			2
-#define WTSR_EN_SHIFT			6
-#define SMPL_EN_SHIFT			7
-#define WTSRT_MASK			(3 << WTSRT_SHIFT)
-#define SMPLT_MASK			(3 << SMPLT_SHIFT)
-#define WTSR_EN_MASK			(1 << WTSR_EN_SHIFT)
-#define SMPL_EN_MASK			(1 << SMPL_EN_SHIFT)
 /* RTC Hour register */
 #define HOUR_PM_SHIFT			6
 #define HOUR_PM_MASK			(1 << HOUR_PM_SHIFT)
@@ -49,7 +40,6 @@
 #define ALARM_ENABLE_MASK		(1 << ALARM_ENABLE_SHIFT)
 
 #define MAX77686_RTC_UPDATE_DELAY	16
-#undef MAX77686_RTC_WTSR_SMPL
 
 enum {
 	RTC_SEC = 0,
@@ -412,64 +402,6 @@ static const struct rtc_class_ops max77686_rtc_ops = {
 	.alarm_irq_enable = max77686_rtc_alarm_irq_enable,
 };
 
-#ifdef MAX77686_RTC_WTSR_SMPL
-static void max77686_rtc_enable_wtsr(struct max77686_rtc_info *info, bool enable)
-{
-	int ret;
-	unsigned int val, mask;
-
-	if (enable)
-		val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT);
-	else
-		val = 0;
-
-	mask = WTSR_EN_MASK | WTSRT_MASK;
-
-	dev_info(info->dev, "%s: %s WTSR\n", __func__,
-			enable ? "enable" : "disable");
-
-	ret = regmap_update_bits(info->max77686->rtc_regmap,
-				 MAX77686_WTSR_SMPL_CNTL, mask, val);
-	if (ret < 0) {
-		dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n",
-				__func__, ret);
-		return;
-	}
-
-	max77686_rtc_update(info, MAX77686_RTC_WRITE);
-}
-
-static void max77686_rtc_enable_smpl(struct max77686_rtc_info *info, bool enable)
-{
-	int ret;
-	unsigned int val, mask;
-
-	if (enable)
-		val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT);
-	else
-		val = 0;
-
-	mask = SMPL_EN_MASK | SMPLT_MASK;
-
-	dev_info(info->dev, "%s: %s SMPL\n", __func__,
-			enable ? "enable" : "disable");
-
-	ret = regmap_update_bits(info->max77686->rtc_regmap,
-				 MAX77686_WTSR_SMPL_CNTL, mask, val);
-	if (ret < 0) {
-		dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n",
-				__func__, ret);
-		return;
-	}
-
-	max77686_rtc_update(info, MAX77686_RTC_WRITE);
-
-	val = 0;
-	regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val);
-	dev_info(info->dev, "%s: WTSR_SMPL(0x%02x)\n", __func__, val);
-}
-#endif /* MAX77686_RTC_WTSR_SMPL */
-
 static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
 {
 	u8 data[2];
@@ -519,11 +451,6 @@ static int max77686_rtc_probe(struct platform_device *pdev)
 		goto err_rtc;
 	}
 
-#ifdef MAX77686_RTC_WTSR_SMPL
-	max77686_rtc_enable_wtsr(info, true);
-	max77686_rtc_enable_smpl(info, true);
-#endif
-
 	device_init_wakeup(&pdev->dev, 1);
 
 	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max77686-rtc",
@@ -556,33 +483,6 @@ err_rtc:
 	return ret;
 }
 
-static void max77686_rtc_shutdown(struct platform_device *pdev)
-{
-#ifdef MAX77686_RTC_WTSR_SMPL
-	struct max77686_rtc_info *info = platform_get_drvdata(pdev);
-	int i;
-	u8 val = 0;
-
-	for (i = 0; i < 3; i++) {
-		max77686_rtc_enable_wtsr(info, false);
-		regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val);
-		dev_info(info->dev, "%s: WTSR_SMPL reg(0x%02x)\n", __func__,
-				val);
-		if (val & WTSR_EN_MASK) {
-			dev_emerg(info->dev, "%s: fail to disable WTSR\n",
-					__func__);
-		} else {
-			dev_info(info->dev, "%s: success to disable WTSR\n",
-					__func__);
-			break;
-		}
-	}
-
-	/* Disable SMPL when power off */
-	max77686_rtc_enable_smpl(info, false);
-#endif /* MAX77686_RTC_WTSR_SMPL */
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int max77686_rtc_suspend(struct device *dev)
 {
@@ -622,7 +522,6 @@ static struct platform_driver max77686_rtc_driver = {
 		.pm	= &max77686_rtc_pm_ops,
 	},
 	.probe		= max77686_rtc_probe,
-	.shutdown	= max77686_rtc_shutdown,
 	.id_table	= rtc_id,
 };
 
-- 
2.0.0.rc2


WARNING: multiple messages have this Message-ID (diff)
From: javier.martinez@collabora.co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR.
Date: Fri,  4 Jul 2014 22:24:13 +0200	[thread overview]
Message-ID: <1404505467-26526-11-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1404505467-26526-1-git-send-email-javier.martinez@collabora.co.uk>

The MAX77686 RTC chip has two features called SMPL (Sudden Momentary
Power Loss) and WTSR (Watchdog Timeout and Software Resets).
Support for these features seems to be implemented in the driver but
compilation is disabled using a C pre-processor conditional.

This code has been disabled since the driver was original merged in
commit fca1dd03 ("rtc: max77686: add Maxim 77686 driver").

So, since this code has never been built, let's just remove it.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
 drivers/rtc/rtc-max77686.c | 101 ---------------------------------------------
 1 file changed, 101 deletions(-)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index c1c6055..7bb5433 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -32,15 +32,6 @@
 #define RTC_UDR_MASK			(1 << RTC_UDR_SHIFT)
 #define RTC_RBUDR_SHIFT			4
 #define RTC_RBUDR_MASK			(1 << RTC_RBUDR_SHIFT)
-/* WTSR and SMPL Register */
-#define WTSRT_SHIFT			0
-#define SMPLT_SHIFT			2
-#define WTSR_EN_SHIFT			6
-#define SMPL_EN_SHIFT			7
-#define WTSRT_MASK			(3 << WTSRT_SHIFT)
-#define SMPLT_MASK			(3 << SMPLT_SHIFT)
-#define WTSR_EN_MASK			(1 << WTSR_EN_SHIFT)
-#define SMPL_EN_MASK			(1 << SMPL_EN_SHIFT)
 /* RTC Hour register */
 #define HOUR_PM_SHIFT			6
 #define HOUR_PM_MASK			(1 << HOUR_PM_SHIFT)
@@ -49,7 +40,6 @@
 #define ALARM_ENABLE_MASK		(1 << ALARM_ENABLE_SHIFT)
 
 #define MAX77686_RTC_UPDATE_DELAY	16
-#undef MAX77686_RTC_WTSR_SMPL
 
 enum {
 	RTC_SEC = 0,
@@ -412,64 +402,6 @@ static const struct rtc_class_ops max77686_rtc_ops = {
 	.alarm_irq_enable = max77686_rtc_alarm_irq_enable,
 };
 
-#ifdef MAX77686_RTC_WTSR_SMPL
-static void max77686_rtc_enable_wtsr(struct max77686_rtc_info *info, bool enable)
-{
-	int ret;
-	unsigned int val, mask;
-
-	if (enable)
-		val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT);
-	else
-		val = 0;
-
-	mask = WTSR_EN_MASK | WTSRT_MASK;
-
-	dev_info(info->dev, "%s: %s WTSR\n", __func__,
-			enable ? "enable" : "disable");
-
-	ret = regmap_update_bits(info->max77686->rtc_regmap,
-				 MAX77686_WTSR_SMPL_CNTL, mask, val);
-	if (ret < 0) {
-		dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n",
-				__func__, ret);
-		return;
-	}
-
-	max77686_rtc_update(info, MAX77686_RTC_WRITE);
-}
-
-static void max77686_rtc_enable_smpl(struct max77686_rtc_info *info, bool enable)
-{
-	int ret;
-	unsigned int val, mask;
-
-	if (enable)
-		val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT);
-	else
-		val = 0;
-
-	mask = SMPL_EN_MASK | SMPLT_MASK;
-
-	dev_info(info->dev, "%s: %s SMPL\n", __func__,
-			enable ? "enable" : "disable");
-
-	ret = regmap_update_bits(info->max77686->rtc_regmap,
-				 MAX77686_WTSR_SMPL_CNTL, mask, val);
-	if (ret < 0) {
-		dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n",
-				__func__, ret);
-		return;
-	}
-
-	max77686_rtc_update(info, MAX77686_RTC_WRITE);
-
-	val = 0;
-	regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val);
-	dev_info(info->dev, "%s: WTSR_SMPL(0x%02x)\n", __func__, val);
-}
-#endif /* MAX77686_RTC_WTSR_SMPL */
-
 static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
 {
 	u8 data[2];
@@ -519,11 +451,6 @@ static int max77686_rtc_probe(struct platform_device *pdev)
 		goto err_rtc;
 	}
 
-#ifdef MAX77686_RTC_WTSR_SMPL
-	max77686_rtc_enable_wtsr(info, true);
-	max77686_rtc_enable_smpl(info, true);
-#endif
-
 	device_init_wakeup(&pdev->dev, 1);
 
 	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max77686-rtc",
@@ -556,33 +483,6 @@ err_rtc:
 	return ret;
 }
 
-static void max77686_rtc_shutdown(struct platform_device *pdev)
-{
-#ifdef MAX77686_RTC_WTSR_SMPL
-	struct max77686_rtc_info *info = platform_get_drvdata(pdev);
-	int i;
-	u8 val = 0;
-
-	for (i = 0; i < 3; i++) {
-		max77686_rtc_enable_wtsr(info, false);
-		regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val);
-		dev_info(info->dev, "%s: WTSR_SMPL reg(0x%02x)\n", __func__,
-				val);
-		if (val & WTSR_EN_MASK) {
-			dev_emerg(info->dev, "%s: fail to disable WTSR\n",
-					__func__);
-		} else {
-			dev_info(info->dev, "%s: success to disable WTSR\n",
-					__func__);
-			break;
-		}
-	}
-
-	/* Disable SMPL when power off */
-	max77686_rtc_enable_smpl(info, false);
-#endif /* MAX77686_RTC_WTSR_SMPL */
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int max77686_rtc_suspend(struct device *dev)
 {
@@ -622,7 +522,6 @@ static struct platform_driver max77686_rtc_driver = {
 		.pm	= &max77686_rtc_pm_ops,
 	},
 	.probe		= max77686_rtc_probe,
-	.shutdown	= max77686_rtc_shutdown,
 	.id_table	= rtc_id,
 };
 
-- 
2.0.0.rc2

  parent reply	other threads:[~2014-07-04 20:25 UTC|newest]

Thread overview: 124+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-04 20:24 [PATCH v7 00/24] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 20:24 ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 01/24] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-18  8:17   ` Lee Jones
2014-07-18  8:17     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 02/24] mfd: max77686: Add power management support Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-09 14:44   ` Lee Jones
2014-07-09 14:44     ` Lee Jones
2014-07-18  8:17   ` Lee Jones
2014-07-18  8:17     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 03/24] mfd: max77686: Don't define dummy function if OF isn't enabled Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-09 14:50   ` Lee Jones
2014-07-09 14:50     ` Lee Jones
2014-07-18  8:17   ` Lee Jones
2014-07-18  8:17     ` Lee Jones
2014-07-18  8:17     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 04/24] mfd: max77686: Make platform data over-rule DT Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-09 14:52   ` Lee Jones
2014-07-09 14:52     ` Lee Jones
2014-07-09 18:15     ` Javier Martinez Canillas
2014-07-09 18:15       ` Javier Martinez Canillas
2014-07-18  8:17   ` Lee Jones
2014-07-18  8:17     ` Lee Jones
2014-07-18  8:17     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 05/24] mfd: max77686: Return correct error when pdata isn't found Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-09 14:53   ` Lee Jones
2014-07-09 14:53     ` Lee Jones
2014-07-18  8:18   ` Lee Jones
2014-07-18  8:18     ` Lee Jones
2014-07-18  8:18     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 06/24] mfd: max77686: Make error checking consistent Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-09 14:54   ` Lee Jones
2014-07-09 14:54     ` Lee Jones
2014-07-18  8:18   ` Lee Jones
2014-07-18  8:18     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 07/24] mfd: max77686: Remove unneeded OOM error message Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-18  8:18   ` Lee Jones
2014-07-18  8:18     ` Lee Jones
2014-07-18  8:18     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 08/24] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-09 15:13   ` Lee Jones
2014-07-09 15:13     ` Lee Jones
2014-07-09 18:40     ` Javier Martinez Canillas
2014-07-09 18:40       ` Javier Martinez Canillas
2014-07-10  9:46   ` Linus Walleij
2014-07-10  9:46     ` Linus Walleij
2014-07-11  0:51     ` Javier Martinez Canillas
2014-07-10  9:59   ` amit daniel kachhap
2014-07-10  9:59     ` amit daniel kachhap
2014-07-10  9:59     ` amit daniel kachhap
2014-07-11  1:45     ` Javier Martinez Canillas
2014-07-11  1:45       ` Javier Martinez Canillas
2014-07-11  1:45       ` Javier Martinez Canillas
2014-07-11  4:02       ` Doug Anderson
2014-07-11  4:02         ` Doug Anderson
2014-07-11  4:02         ` Doug Anderson
2014-07-11  9:37       ` amit daniel kachhap
2014-07-11  9:37         ` amit daniel kachhap
2014-07-11  9:37         ` amit daniel kachhap
2014-07-11  9:43       ` Tomasz Figa
2014-07-11  9:43         ` Tomasz Figa
2014-07-11  9:43         ` Tomasz Figa
2014-07-11 10:15         ` Javier Martinez Canillas
2014-07-11 10:15           ` Javier Martinez Canillas
2014-07-11 10:15           ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 09/24] rtc: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` Javier Martinez Canillas [this message]
2014-07-04 20:24   ` [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR Javier Martinez Canillas
2014-07-07  6:09   ` Krzysztof Kozlowski
2014-07-07  6:09     ` Krzysztof Kozlowski
2014-07-04 20:24 ` [PATCH v7 11/24] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 12/24] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 13/24] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 14/24] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 15/24] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 16/24] regulator: max77686: Setup DVS-related GPIOs on probe Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 17/24] mfd: max77686: Add documentation for DVS bindings Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 18/24] mfd: max77686: Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-09 15:31   ` Lee Jones
2014-07-09 15:31     ` Lee Jones
2014-07-09 18:43     ` Javier Martinez Canillas
2014-07-09 18:43       ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 19/24] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 20/24] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 21/24] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 22/24] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas
2014-07-07  6:06   ` Krzysztof Kozlowski
2014-07-07  6:06     ` Krzysztof Kozlowski
2014-07-07  6:57     ` Javier Martinez Canillas
2014-07-07  6:57       ` Javier Martinez Canillas
2014-07-07  6:57       ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 24/24] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
2014-07-04 20:24   ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404505467-26526-11-git-send-email-javier.martinez@collabora.co.uk \
    --to=javier.martinez@collabora.co.uk \
    --cc=a.zummo@towertech.it \
    --cc=afaerber@suse.de \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=olof@lixom.net \
    --cc=tomeu.vizoso@collabora.com \
    --cc=trblinux@gmail.com \
    --cc=yadi.brar01@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.