From: Mark Einon <mark.einon@gmail.com> To: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Mark Einon <mark.einon@gmail.com> Subject: [PATCH 5/8] staging: et131x: Remove unnecessary i2c_wack variable Date: Wed, 20 Aug 2014 23:17:55 +0100 [thread overview] Message-ID: <1408573078-9320-6-git-send-email-mark.einon@gmail.com> (raw) In-Reply-To: <1408573078-9320-1-git-send-email-mark.einon@gmail.com> i2c_wack is only used to implement a while(1) loop, so let's remove it. Signed-off-by: Mark Einon <mark.einon@gmail.com> --- drivers/staging/et131x/et131x.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index fc18e8d..551b250 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -573,7 +573,6 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) int index = 0; int retries; int err = 0; - int i2c_wack = 0; int writeok = 0; u32 status; u32 val = 0; @@ -599,8 +598,6 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE)) return -EIO; - i2c_wack = 1; - /* Prepare EEPROM address for Step 3 */ for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) { @@ -656,9 +653,9 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) */ udelay(10); - while (i2c_wack) { + while (1) { if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, - LBCIF_CONTROL_LBCIF_ENABLE)) + LBCIF_CONTROL_LBCIF_ENABLE)) writeok = 0; /* Do read until internal ACK_ERROR goes away meaning write @@ -670,7 +667,8 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) addr); do { pci_read_config_dword(pdev, - LBCIF_DATA_REGISTER, &val); + LBCIF_DATA_REGISTER, + &val); } while ((val & 0x00010000) == 0); } while (val & 0x00040000); -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: Mark Einon <mark.einon@gmail.com> To: gregkh@linuxfoundation.org Cc: devel@driverdev.osuosl.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Mark Einon <mark.einon@gmail.com> Subject: [PATCH 5/8] staging: et131x: Remove unnecessary i2c_wack variable Date: Wed, 20 Aug 2014 23:17:55 +0100 [thread overview] Message-ID: <1408573078-9320-6-git-send-email-mark.einon@gmail.com> (raw) In-Reply-To: <1408573078-9320-1-git-send-email-mark.einon@gmail.com> i2c_wack is only used to implement a while(1) loop, so let's remove it. Signed-off-by: Mark Einon <mark.einon@gmail.com> --- drivers/staging/et131x/et131x.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index fc18e8d..551b250 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -573,7 +573,6 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) int index = 0; int retries; int err = 0; - int i2c_wack = 0; int writeok = 0; u32 status; u32 val = 0; @@ -599,8 +598,6 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE)) return -EIO; - i2c_wack = 1; - /* Prepare EEPROM address for Step 3 */ for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) { @@ -656,9 +653,9 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) */ udelay(10); - while (i2c_wack) { + while (1) { if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER, - LBCIF_CONTROL_LBCIF_ENABLE)) + LBCIF_CONTROL_LBCIF_ENABLE)) writeok = 0; /* Do read until internal ACK_ERROR goes away meaning write @@ -670,7 +667,8 @@ static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data) addr); do { pci_read_config_dword(pdev, - LBCIF_DATA_REGISTER, &val); + LBCIF_DATA_REGISTER, + &val); } while ((val & 0x00010000) == 0); } while (val & 0x00040000); -- 2.1.0
next prev parent reply other threads:[~2014-08-20 22:19 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-08-20 22:17 [PATCH 0/8] Implement NAPI in et131x Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-20 22:17 ` [PATCH 1/8] staging: et131x: Use eth_mac_addr() instead of duplicating the functionality Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-20 22:17 ` [PATCH 2/8] staging: et131x: Don't handle rx/tx packets when changing mtu Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-20 22:17 ` [PATCH 3/8] staging: et131x: Use for loop to initialise contiguous registers to zero Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-30 20:32 ` Greg KH 2014-08-31 14:25 ` Mark Einon 2014-08-31 16:11 ` Greg KH 2014-08-20 22:17 ` [PATCH 4/8] staging: et131x: Use for loop to initialise contiguous macstat " Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-21 8:40 ` David Laight 2014-08-21 10:05 ` Mark Einon 2014-08-21 10:05 ` Mark Einon 2014-08-20 22:17 ` Mark Einon [this message] 2014-08-20 22:17 ` [PATCH 5/8] staging: et131x: Remove unnecessary i2c_wack variable Mark Einon 2014-08-20 22:22 ` Fabio Estevam 2014-08-20 22:22 ` Fabio Estevam 2014-08-21 9:18 ` Mark Einon 2014-08-21 9:18 ` Mark Einon 2014-08-21 12:06 ` Fabio Estevam 2014-08-21 12:06 ` Fabio Estevam 2014-08-21 14:59 ` Mark Einon 2014-08-21 14:59 ` Mark Einon 2014-08-20 22:17 ` [PATCH 6/8] staging: et131x: Rename NUM_PACKETS_HANDLED to MAX_PACKETS_HANDLED Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-20 22:17 ` [PATCH 7/8] staging: et131x: Fix ET_INTR_TXDMA_ISR register name typo Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-20 22:17 ` [PATCH 8/8] staging: et131x: Implement NAPI support Mark Einon 2014-08-20 22:17 ` Mark Einon 2014-08-21 3:25 ` Stephen Hemminger 2014-08-21 9:23 ` Mark Einon 2014-08-21 9:23 ` Mark Einon 2014-08-21 3:25 ` Stephen Hemminger 2014-08-21 9:25 ` Mark Einon 2014-08-21 9:25 ` Mark Einon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1408573078-9320-6-git-send-email-mark.einon@gmail.com \ --to=mark.einon@gmail.com \ --cc=devel@driverdev.osuosl.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-kernel@vger.kernel.org \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.