From: Romain Perier <romain.perier@gmail.com> To: heiko@sntech.de Cc: linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, arnd@arndb.de Subject: [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree Date: Wed, 3 Sep 2014 10:27:15 +0000 [thread overview] Message-ID: <1409740036-8117-3-git-send-email-romain.perier@gmail.com> (raw) In-Reply-To: <1409740036-8117-1-git-send-email-romain.perier@gmail.com> This adds support for EMAC Rockchip driver on RK3188 SoCs. Signed-off-by: Romain Perier <romain.perier@gmail.com> --- arch/arm/boot/dts/rk3188.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/rk3xxx.dtsi | 17 +++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ee801a9..a182713 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -147,6 +147,24 @@ bias-disable; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, //tx_en + <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, //txd1 + <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, //txd0 + <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, //rxd0 + <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, //rxd1 + <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, //mac_clk + <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, //rx_err + <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; //crs_dvalid + }; + + emac_mdio: emac-mdio { + rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>, + <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 8caf85d..208b1df 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -91,6 +91,23 @@ status = "disabled"; }; + emac: ethernet@10204000 { + compatible = "snps,arc-emac"; + reg = <0x10204000 0x3c>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref"; + max-speed = <100>; + phy-mode = "rmii"; + + status = "disabled"; + }; + mmc0: dwmmc@10214000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: romain.perier@gmail.com (Romain Perier) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree Date: Wed, 3 Sep 2014 10:27:15 +0000 [thread overview] Message-ID: <1409740036-8117-3-git-send-email-romain.perier@gmail.com> (raw) In-Reply-To: <1409740036-8117-1-git-send-email-romain.perier@gmail.com> This adds support for EMAC Rockchip driver on RK3188 SoCs. Signed-off-by: Romain Perier <romain.perier@gmail.com> --- arch/arm/boot/dts/rk3188.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/rk3xxx.dtsi | 17 +++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ee801a9..a182713 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -147,6 +147,24 @@ bias-disable; }; + emac { + emac_xfer: emac-xfer { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, //tx_en + <RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, //txd1 + <RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, //txd0 + <RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, //rxd0 + <RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, //rxd1 + <RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, //mac_clk + <RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, //rx_err + <RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; //crs_dvalid + }; + + emac_mdio: emac-mdio { + rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>, + <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 8caf85d..208b1df 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -91,6 +91,23 @@ status = "disabled"; }; + emac: ethernet at 10204000 { + compatible = "snps,arc-emac"; + reg = <0x10204000 0x3c>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; + clock-names = "hclk", "macref"; + max-speed = <100>; + phy-mode = "rmii"; + + status = "disabled"; + }; + mmc0: dwmmc at 10214000 { compatible = "rockchip,rk2928-dw-mshc"; reg = <0x10214000 0x1000>; -- 1.9.1
next prev parent reply other threads:[~2014-09-03 10:25 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-03 10:27 [PATCH v4 1/4] ethernet: arc: Add support for Rockchip SoC layer device tree bindings Romain Perier 2014-09-03 10:27 ` Romain Perier 2014-09-03 10:27 ` [PATCH 2/4] dt-bindings: Document EMAC Rockchip Romain Perier 2014-09-03 10:27 ` Romain Perier 2014-09-03 14:26 ` Heiko Stübner 2014-09-03 14:26 ` Heiko Stübner 2014-09-03 10:27 ` Romain Perier [this message] 2014-09-03 10:27 ` [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree Romain Perier 2014-09-03 10:27 ` [PATCH 4/4] ARM: dts: Enable emac node on the rk3188-radxarock boards Romain Perier 2014-09-03 10:27 ` Romain Perier 2014-09-03 15:29 ` Naoki FUKAUMI 2014-09-03 15:29 ` Naoki FUKAUMI 2014-09-03 16:37 ` PERIER Romain 2014-09-03 16:37 ` PERIER Romain 2014-09-03 17:45 ` Arnd Bergmann 2014-09-03 17:45 ` Arnd Bergmann 2014-09-03 10:42 ` [PATCH v4 1/4] ethernet: arc: Add support for Rockchip SoC layer device tree bindings Varka Bhadram 2014-09-03 10:42 ` Varka Bhadram 2014-09-03 11:14 ` Arnd Bergmann 2014-09-03 11:14 ` Arnd Bergmann 2014-09-03 12:20 ` Heiko Stübner 2014-09-03 12:20 ` Heiko Stübner 2014-09-03 12:50 ` Arnd Bergmann 2014-09-03 12:50 ` Arnd Bergmann 2014-09-03 16:52 [PATCH v5 " Romain Perier 2014-09-03 16:52 ` [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree Romain Perier 2014-09-03 16:52 ` Romain Perier 2014-09-04 12:11 ` Heiko Stübner 2014-09-04 12:11 ` Heiko Stübner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1409740036-8117-3-git-send-email-romain.perier@gmail.com \ --to=romain.perier@gmail.com \ --cc=arnd@arndb.de \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=netdev@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.