From: Javier Martinez Canillas <javier.martinez@collabora.co.uk> To: Kukjin Kim <kgene.kim@samsung.com> Cc: Doug Anderson <dianders@chromium.org>, Olof Johansson <olof@lixom.net>, afaerber@suse.de, Nick Dyer <nick.dyer@itdev.co.uk>, Yufeng Shen <miletus@chromium.org>, linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Javier Martinez Canillas <javier.martinez@collabora.co.uk> Subject: [PATCH v4 2/3] ARM: dts: Add Peach Pi dts entry for Atmel touchpad Date: Wed, 10 Sep 2014 13:31:30 +0200 [thread overview] Message-ID: <1410348691-18317-3-git-send-email-javier.martinez@collabora.co.uk> (raw) In-Reply-To: <1410348691-18317-1-git-send-email-javier.martinez@collabora.co.uk> The Peach Pi board has an Atmel maXTouch trackpad device. Add the needed Device Tree nodes to support it. This Device Tree change is based on the Chrome OS 3.8 tree but adapted to use the mainline Atmel maXTouch DT binding. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- Changes since v3: None, new patch. arch/arm/boot/dts/exynos5800-peach-pi.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 88b3544..025a095 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -505,6 +505,27 @@ }; }; +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + /* Atmel mXT540S */ + trackpad@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO 0 */ + KEY_RESERVED /* GPIO 1 */ + BTN_LEFT /* GPIO 2 */ + KEY_RESERVED>; /* GPIO 3 */ + }; +}; + &hsi2c_9 { status = "okay"; clock-frequency = <400000>; @@ -589,6 +610,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: javier.martinez@collabora.co.uk (Javier Martinez Canillas) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 2/3] ARM: dts: Add Peach Pi dts entry for Atmel touchpad Date: Wed, 10 Sep 2014 13:31:30 +0200 [thread overview] Message-ID: <1410348691-18317-3-git-send-email-javier.martinez@collabora.co.uk> (raw) In-Reply-To: <1410348691-18317-1-git-send-email-javier.martinez@collabora.co.uk> The Peach Pi board has an Atmel maXTouch trackpad device. Add the needed Device Tree nodes to support it. This Device Tree change is based on the Chrome OS 3.8 tree but adapted to use the mainline Atmel maXTouch DT binding. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> --- Changes since v3: None, new patch. arch/arm/boot/dts/exynos5800-peach-pi.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 88b3544..025a095 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -505,6 +505,27 @@ }; }; +&hsi2c_8 { + status = "okay"; + clock-frequency = <333000>; + /* Atmel mXT540S */ + trackpad at 4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpx1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_irq>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED /* GPIO 0 */ + KEY_RESERVED /* GPIO 1 */ + BTN_LEFT /* GPIO 2 */ + KEY_RESERVED>; /* GPIO 3 */ + }; +}; + &hsi2c_9 { status = "okay"; clock-frequency = <400000>; @@ -589,6 +610,13 @@ samsung,pin-drv = <0>; }; + trackpad_irq: trackpad-irq { + samsung,pins = "gpx1-1"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + power_key_irq: power-key-irq { samsung,pins = "gpx1-2"; samsung,pin-function = <0>; -- 2.1.0
next prev parent reply other threads:[~2014-09-10 11:31 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-10 11:31 [PATCH v4 0/3] Add Atmel maXTouch support for Peach boards Javier Martinez Canillas 2014-09-10 11:31 ` Javier Martinez Canillas 2014-09-10 11:31 ` [PATCH v4 1/3] ARM: dts: Add Peach Pit dts entry for Atmel touchpad Javier Martinez Canillas 2014-09-10 11:31 ` Javier Martinez Canillas 2014-09-10 22:25 ` Dmitry Torokhov 2014-09-10 22:25 ` Dmitry Torokhov 2014-09-11 9:44 ` Javier Martinez Canillas 2014-09-11 9:44 ` Javier Martinez Canillas 2014-09-13 16:36 ` Kukjin Kim 2014-09-13 16:36 ` Kukjin Kim 2014-09-10 11:31 ` Javier Martinez Canillas [this message] 2014-09-10 11:31 ` [PATCH v4 2/3] ARM: dts: Add Peach Pi " Javier Martinez Canillas 2014-09-10 22:26 ` Dmitry Torokhov 2014-09-10 22:26 ` Dmitry Torokhov 2014-09-10 11:31 ` [PATCH v4 3/3] ARM: exynos_defconfig: Enable Atmel maXTouch support Javier Martinez Canillas 2014-09-10 11:31 ` Javier Martinez Canillas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1410348691-18317-3-git-send-email-javier.martinez@collabora.co.uk \ --to=javier.martinez@collabora.co.uk \ --cc=afaerber@suse.de \ --cc=dianders@chromium.org \ --cc=kgene.kim@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=miletus@chromium.org \ --cc=nick.dyer@itdev.co.uk \ --cc=olof@lixom.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.