[PATCH V2 0/2] mfd: twl4030-power: support ti,system-power-controller

[PATCH V2 0/2] mfd: twl4030-power: support ti,system-power-controller

[Nishanth Menon]

This series adds ti,system-power-controller to Documentation and the
driver seperately as per maintainer preference.

Based on v3.17-rc1

Changes since V1: update in documentation, picked up Tony's ack for patch #2.

V1: http://marc.info/?l=devicetree&m=140977126218800&w=2

Nishanth Menon (2):
  Documentation: devicetree: mfd: twl4030-power: Use the standard
    'ti,system-power-controller' to mark power control
  mfd: twl4030-power: use 'ti,system-power-controller' as alternative
    way to support system power off

 .../devicetree/bindings/mfd/twl4030-power.txt      |    9 +++++++--
 drivers/mfd/twl4030-power.c                        |    3 +++
 2 files changed, 10 insertions(+), 2 deletions(-)

-- 
1.7.9.5

[PATCH V2 0/2] mfd: twl4030-power: support ti,system-power-controller

[Nishanth Menon]

This series adds ti,system-power-controller to Documentation and the
driver seperately as per maintainer preference.

Based on v3.17-rc1

Changes since V1: update in documentation, picked up Tony's ack for patch #2.

V1: http://marc.info/?l=devicetree&m=140977126218800&w=2

Nishanth Menon (2):
  Documentation: devicetree: mfd: twl4030-power: Use the standard
    'ti,system-power-controller' to mark power control
  mfd: twl4030-power: use 'ti,system-power-controller' as alternative
    way to support system power off

 .../devicetree/bindings/mfd/twl4030-power.txt      |    9 +++++++--
 drivers/mfd/twl4030-power.c                        |    3 +++
 2 files changed, 10 insertions(+), 2 deletions(-)

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Nishanth Menon]

ti,system-power-controller is more or less the standard way of
indicating that the PMIC is the system wide power controller and hence
may be used to switch off the system. Almost ALL TI PMIC drivers and
many Maxim PMIC drivers follow the same style.

So support 'ti,system-power-controller' in addition to the usual
'ti,use_poweroff' to indicate that the PMIC instance has control for
switching off the system.

Signed-off-by: Nishanth Menon <nm@ti.com>
---

V2: picked up documentation suggestion from Sebastien
V1: https://patchwork.kernel.org/patch/4836381/

 .../devicetree/bindings/mfd/twl4030-power.txt      |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index b9ee7b9..a7390c7 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -23,8 +23,13 @@ down during off-idle. Note that this does not work on all boards
 depending on how the external oscillator is wired.
 
 Optional properties:
-- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
-		   SLEEP-to-OFF transition when the system poweroffs.
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip will
+  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
 
 Example:
 &i2c1 {
-- 
1.7.9.5

[PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Nishanth Menon]

ti,system-power-controller is more or less the standard way of
indicating that the PMIC is the system wide power controller and hence
may be used to switch off the system. Almost ALL TI PMIC drivers and
many Maxim PMIC drivers follow the same style.

So support 'ti,system-power-controller' in addition to the usual
'ti,use_poweroff' to indicate that the PMIC instance has control for
switching off the system.

Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
---

V2: picked up documentation suggestion from Sebastien
V1: https://patchwork.kernel.org/patch/4836381/

 .../devicetree/bindings/mfd/twl4030-power.txt      |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index b9ee7b9..a7390c7 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -23,8 +23,13 @@ down during off-idle. Note that this does not work on all boards
 depending on how the external oscillator is wired.
 
 Optional properties:
-- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
-		   SLEEP-to-OFF transition when the system poweroffs.
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip will
+  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
 
 Example:
 &i2c1 {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Lee Jones]

On Wed, 17 Sep 2014, Nishanth Menon wrote:

> ti,system-power-controller is more or less the standard way of
> indicating that the PMIC is the system wide power controller and hence
> may be used to switch off the system. Almost ALL TI PMIC drivers and
> many Maxim PMIC drivers follow the same style.
> 
> So support 'ti,system-power-controller' in addition to the usual
> 'ti,use_poweroff' to indicate that the PMIC instance has control for
> switching off the system.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> 
> V2: picked up documentation suggestion from Sebastien

It would be good to get Sebastian's Ack.

> V1: https://patchwork.kernel.org/patch/4836381/
> 
>  .../devicetree/bindings/mfd/twl4030-power.txt      |    9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
> index b9ee7b9..a7390c7 100644
> --- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
> +++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
> @@ -23,8 +23,13 @@ down during off-idle. Note that this does not work on all boards
>  depending on how the external oscillator is wired.
>  
>  Optional properties:
> -- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
> -		   SLEEP-to-OFF transition when the system poweroffs.
> +
> +- ti,system-power-controller: This indicates that TWL4030 is the
> +  power supply master of the system. With this flag, the chip will
> +  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
> +  system poweroffs.
> +
> +- ti,use_poweroff: Deprecated name for ti,system-power-controller
>  
>  Example:
>  &i2c1 {

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1197 bytes --]

On Wed, Sep 17, 2014 at 08:44:00AM -0700, Lee Jones wrote:
> On Wed, 17 Sep 2014, Nishanth Menon wrote:
> > ti,system-power-controller is more or less the standard way of
> > indicating that the PMIC is the system wide power controller and hence
> > may be used to switch off the system. Almost ALL TI PMIC drivers and
> > many Maxim PMIC drivers follow the same style.
> > 
> > So support 'ti,system-power-controller' in addition to the usual
> > 'ti,use_poweroff' to indicate that the PMIC instance has control for
> > switching off the system.
> > 
> > Signed-off-by: Nishanth Menon <nm@ti.com>
> > ---
> > 
> > V2: picked up documentation suggestion from Sebastien
> 
> It would be good to get Sebastian's Ack.

Acked-By: Sebastian Reichel <sre@kernel.org>

[...]

> > +- ti,system-power-controller: This indicates that TWL4030 is the
> > +  power supply master of the system. With this flag, the chip will
> > +  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
> > +  system poweroffs.

One minor thing: While the documentation is updated you may want to
fix the typo "will initiates" to "will initiate" (or just drop the
"will").

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1248 bytes --]

On Wed, Sep 17, 2014 at 08:44:00AM -0700, Lee Jones wrote:
> On Wed, 17 Sep 2014, Nishanth Menon wrote:
> > ti,system-power-controller is more or less the standard way of
> > indicating that the PMIC is the system wide power controller and hence
> > may be used to switch off the system. Almost ALL TI PMIC drivers and
> > many Maxim PMIC drivers follow the same style.
> > 
> > So support 'ti,system-power-controller' in addition to the usual
> > 'ti,use_poweroff' to indicate that the PMIC instance has control for
> > switching off the system.
> > 
> > Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
> > ---
> > 
> > V2: picked up documentation suggestion from Sebastien
> 
> It would be good to get Sebastian's Ack.

Acked-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[...]

> > +- ti,system-power-controller: This indicates that TWL4030 is the
> > +  power supply master of the system. With this flag, the chip will
> > +  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
> > +  system poweroffs.

One minor thing: While the documentation is updated you may want to
fix the typo "will initiates" to "will initiate" (or just drop the
"will").

-- Sebastian

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Nishanth Menon]

On 18:55-20140917, Sebastian Reichel wrote:
> On Wed, Sep 17, 2014 at 08:44:00AM -0700, Lee Jones wrote:
> > On Wed, 17 Sep 2014, Nishanth Menon wrote:
> > > ti,system-power-controller is more or less the standard way of
> > > indicating that the PMIC is the system wide power controller and hence
> > > may be used to switch off the system. Almost ALL TI PMIC drivers and
> > > many Maxim PMIC drivers follow the same style.
> > > 
> > > So support 'ti,system-power-controller' in addition to the usual
> > > 'ti,use_poweroff' to indicate that the PMIC instance has control for
> > > switching off the system.
> > > 
> > > Signed-off-by: Nishanth Menon <nm@ti.com>
> > > ---
> > > 
> > > V2: picked up documentation suggestion from Sebastien
> > 
> > It would be good to get Sebastian's Ack.
> 
> Acked-By: Sebastian Reichel <sre@kernel.org>

Thanks.
> 
> [...]
> 
> > > +- ti,system-power-controller: This indicates that TWL4030 is the
> > > +  power supply master of the system. With this flag, the chip will
> > > +  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
> > > +  system poweroffs.
> 
> One minor thing: While the documentation is updated you may want to
> fix the typo "will initiates" to "will initiate" (or just drop the
> "will").

Updated v3 patch with your ack and correction to drop "will" below. I
will assume I wont need to repost the following update. Do let me know
if you'd like me to.

---8<---
>From ae3bcfc74080b14f9fd0178f6526bf8f34a8c865 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Wed, 3 Sep 2014 13:55:02 -0500
Subject: [PATCH V3 1/2 ] Documentation: devicetree: mfd: twl4030-power: Use the
 standard 'ti,system-power-controller' to mark power control

ti,system-power-controller is more or less the standard way of
indicating that the PMIC is the system wide power controller and hence
may be used to switch off the system. Almost ALL TI PMIC drivers and
many Maxim PMIC drivers follow the same style.

So support 'ti,system-power-controller' in addition to the usual
'ti,use_poweroff' to indicate that the PMIC instance has control for
switching off the system.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
---
 .../devicetree/bindings/mfd/twl4030-power.txt      |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index b9ee7b9..15a63e6 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -23,8 +23,13 @@ down during off-idle. Note that this does not work on all boards
 depending on how the external oscillator is wired.
 
 Optional properties:
-- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
-		   SLEEP-to-OFF transition when the system poweroffs.
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip
+  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
 
 Example:
 &i2c1 {
-- 
1.7.9.5
-- 
Regards,
Nishanth Menon

Re: [PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Nishanth Menon]

On 18:55-20140917, Sebastian Reichel wrote:
> On Wed, Sep 17, 2014 at 08:44:00AM -0700, Lee Jones wrote:
> > On Wed, 17 Sep 2014, Nishanth Menon wrote:
> > > ti,system-power-controller is more or less the standard way of
> > > indicating that the PMIC is the system wide power controller and hence
> > > may be used to switch off the system. Almost ALL TI PMIC drivers and
> > > many Maxim PMIC drivers follow the same style.
> > > 
> > > So support 'ti,system-power-controller' in addition to the usual
> > > 'ti,use_poweroff' to indicate that the PMIC instance has control for
> > > switching off the system.
> > > 
> > > Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
> > > ---
> > > 
> > > V2: picked up documentation suggestion from Sebastien
> > 
> > It would be good to get Sebastian's Ack.
> 
> Acked-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Thanks.
> 
> [...]
> 
> > > +- ti,system-power-controller: This indicates that TWL4030 is the
> > > +  power supply master of the system. With this flag, the chip will
> > > +  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
> > > +  system poweroffs.
> 
> One minor thing: While the documentation is updated you may want to
> fix the typo "will initiates" to "will initiate" (or just drop the
> "will").

Updated v3 patch with your ack and correction to drop "will" below. I
will assume I wont need to repost the following update. Do let me know
if you'd like me to.

---8<---
>From ae3bcfc74080b14f9fd0178f6526bf8f34a8c865 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Date: Wed, 3 Sep 2014 13:55:02 -0500
Subject: [PATCH V3 1/2 ] Documentation: devicetree: mfd: twl4030-power: Use the
 standard 'ti,system-power-controller' to mark power control

ti,system-power-controller is more or less the standard way of
indicating that the PMIC is the system wide power controller and hence
may be used to switch off the system. Almost ALL TI PMIC drivers and
many Maxim PMIC drivers follow the same style.

So support 'ti,system-power-controller' in addition to the usual
'ti,use_poweroff' to indicate that the PMIC instance has control for
switching off the system.

Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
Acked-By: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/mfd/twl4030-power.txt      |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/twl4030-power.txt b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
index b9ee7b9..15a63e6 100644
--- a/Documentation/devicetree/bindings/mfd/twl4030-power.txt
+++ b/Documentation/devicetree/bindings/mfd/twl4030-power.txt
@@ -23,8 +23,13 @@ down during off-idle. Note that this does not work on all boards
 depending on how the external oscillator is wired.
 
 Optional properties:
-- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
-		   SLEEP-to-OFF transition when the system poweroffs.
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip
+  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
 
 Example:
 &i2c1 {
-- 
1.7.9.5
-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V2 1/2] Documentation: devicetree: mfd: twl4030-power: Use the standard 'ti,system-power-controller' to mark power control

[Lee Jones]

On Wed, 17 Sep 2014, Sebastian Reichel wrote:

> On Wed, Sep 17, 2014 at 08:44:00AM -0700, Lee Jones wrote:
> > On Wed, 17 Sep 2014, Nishanth Menon wrote:
> > > ti,system-power-controller is more or less the standard way of
> > > indicating that the PMIC is the system wide power controller and hence
> > > may be used to switch off the system. Almost ALL TI PMIC drivers and
> > > many Maxim PMIC drivers follow the same style.
> > > 
> > > So support 'ti,system-power-controller' in addition to the usual
> > > 'ti,use_poweroff' to indicate that the PMIC instance has control for
> > > switching off the system.
> > > 
> > > Signed-off-by: Nishanth Menon <nm@ti.com>
> > > ---
> > > 
> > > V2: picked up documentation suggestion from Sebastien
> > 
> > It would be good to get Sebastian's Ack.
> 
> Acked-By: Sebastian Reichel <sre@kernel.org>
> 
> [...]
> 
> > > +- ti,system-power-controller: This indicates that TWL4030 is the
> > > +  power supply master of the system. With this flag, the chip will
> > > +  initiates an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
> > > +  system poweroffs.
> 
> One minor thing: While the documentation is updated you may want to
> fix the typo "will initiates" to "will initiate" (or just drop the
> "will").

Applied with Sebastian's Ack and I fixed this up too.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH V2 2/2] mfd: twl4030-power: use 'ti,system-power-controller' as alternative way to support system power off

[Nishanth Menon]

ti,system-power-controller is more or less the standard way of
indicating that the PMIC is the system wide power controller and hence
may be used to switch off the system. Almost ALL TI PMIC drivers and
many Maxim PMIC drivers follow the same style.

So support 'ti,system-power-controller' in addition to the usual
'ti,use_poweroff' to indicate that the PMIC instance has control for
switching off the system.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---

V2: no change, picked up Tony's ack.
V1: https://patchwork.kernel.org/patch/4836371/
 drivers/mfd/twl4030-power.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 3bc969a..1c129ba 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -627,6 +627,9 @@ static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
 	if (pdata && pdata->use_poweroff)
 		return true;
 
+	if (of_property_read_bool(node, "ti,system-power-controller"))
+		return true;
+
 	if (of_property_read_bool(node, "ti,use_poweroff"))
 		return true;
 
-- 
1.7.9.5

[PATCH V2 2/2] mfd: twl4030-power: use 'ti,system-power-controller' as alternative way to support system power off

[Nishanth Menon]

ti,system-power-controller is more or less the standard way of
indicating that the PMIC is the system wide power controller and hence
may be used to switch off the system. Almost ALL TI PMIC drivers and
many Maxim PMIC drivers follow the same style.

So support 'ti,system-power-controller' in addition to the usual
'ti,use_poweroff' to indicate that the PMIC instance has control for
switching off the system.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---

V2: no change, picked up Tony's ack.
V1: https://patchwork.kernel.org/patch/4836371/
 drivers/mfd/twl4030-power.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 3bc969a..1c129ba 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -627,6 +627,9 @@ static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
 	if (pdata && pdata->use_poweroff)
 		return true;
 
+	if (of_property_read_bool(node, "ti,system-power-controller"))
+		return true;
+
 	if (of_property_read_bool(node, "ti,use_poweroff"))
 		return true;
 
-- 
1.7.9.5

Re: [PATCH V2 2/2] mfd: twl4030-power: use 'ti,system-power-controller' as alternative way to support system power off

[Lee Jones]

On Wed, 17 Sep 2014, Nishanth Menon wrote:

> ti,system-power-controller is more or less the standard way of
> indicating that the PMIC is the system wide power controller and hence
> may be used to switch off the system. Almost ALL TI PMIC drivers and
> many Maxim PMIC drivers follow the same style.
> 
> So support 'ti,system-power-controller' in addition to the usual
> 'ti,use_poweroff' to indicate that the PMIC instance has control for
> switching off the system.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Acked-by: Tony Lindgren <tony@atomide.com>
> ---
> 
> V2: no change, picked up Tony's ack.
> V1: https://patchwork.kernel.org/patch/4836371/
>  drivers/mfd/twl4030-power.c |    3 +++
>  1 file changed, 3 insertions(+)

Applied, thanks.

> diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> index 3bc969a..1c129ba 100644
> --- a/drivers/mfd/twl4030-power.c
> +++ b/drivers/mfd/twl4030-power.c
> @@ -627,6 +627,9 @@ static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
>  	if (pdata && pdata->use_poweroff)
>  		return true;
>  
> +	if (of_property_read_bool(node, "ti,system-power-controller"))
> +		return true;
> +
>  	if (of_property_read_bool(node, "ti,use_poweroff"))
>  		return true;
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH V2 2/2] mfd: twl4030-power: use 'ti,system-power-controller' as alternative way to support system power off

[Lee Jones]

On Wed, 17 Sep 2014, Nishanth Menon wrote:

> ti,system-power-controller is more or less the standard way of
> indicating that the PMIC is the system wide power controller and hence
> may be used to switch off the system. Almost ALL TI PMIC drivers and
> many Maxim PMIC drivers follow the same style.
> 
> So support 'ti,system-power-controller' in addition to the usual
> 'ti,use_poweroff' to indicate that the PMIC instance has control for
> switching off the system.
> 
> Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
> Acked-by: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
> 
> V2: no change, picked up Tony's ack.
> V1: https://patchwork.kernel.org/patch/4836371/
>  drivers/mfd/twl4030-power.c |    3 +++
>  1 file changed, 3 insertions(+)

Applied, thanks.

> diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
> index 3bc969a..1c129ba 100644
> --- a/drivers/mfd/twl4030-power.c
> +++ b/drivers/mfd/twl4030-power.c
> @@ -627,6 +627,9 @@ static bool twl4030_power_use_poweroff(const struct twl4030_power_data *pdata,
>  	if (pdata && pdata->use_poweroff)
>  		return true;
>  
> +	if (of_property_read_bool(node, "ti,system-power-controller"))
> +		return true;
> +
>  	if (of_property_read_bool(node, "ti,use_poweroff"))
>  		return true;
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html