[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type = PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type = PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq = 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq = 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
CC: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
CC: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
argument. We can look up msi_chip pointer by the device pointer
or irq number, so clean up msi_chip argument.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/irqchip/irq-armada-370-xp.c |    8 +++-----
 drivers/pci/host/pci-tegra.c        |    8 +++++---
 drivers/pci/host/pcie-designware.c  |    4 ++--
 drivers/pci/host/pcie-rcar.c        |    8 +++++---
 drivers/pci/msi.c                   |    4 ++--
 include/linux/msi.h                 |    5 ++---
 6 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index df60eab..3909d06 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -129,9 +129,8 @@ static void armada_370_xp_free_msi(int hwirq)
 	mutex_unlock(&msi_used_lock);
 }
 
-static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
-				       struct pci_dev *pdev,
-				       struct msi_desc *desc)
+static int armada_370_xp_setup_msi_irq(struct pci_dev *pdev, 
+		struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	int virq, hwirq;
@@ -160,8 +159,7 @@ static int armada_370_xp_setup_msi_irq(struct msi_chip *chip,
 	return 0;
 }
 
-static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip,
-					   unsigned int irq)
+static void armada_370_xp_teardown_msi_irq(unsigned int irq)
 {
 	struct irq_data *d = irq_get_irq_data(irq);
 	unsigned long hwirq = d->hwirq;
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 0fb0fdb..edd4040 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -1157,9 +1157,10 @@ static irqreturn_t tegra_pcie_msi_irq(int irq, void *data)
 	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int tegra_msi_setup_irq(struct pci_dev *pdev,
 			       struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct msi_msg msg;
 	unsigned int irq;
@@ -1185,10 +1186,11 @@ static int tegra_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void tegra_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void tegra_msi_teardown_irq(unsigned int irq)
 {
-	struct tegra_msi *msi = to_tegra_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct tegra_msi *msi = to_tegra_msi(chip);
 
 	tegra_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index fa2fa45..517f1e1 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -342,7 +342,7 @@ static void clear_irq(unsigned int irq)
 	msi->msi_attrib.multiple = 0;
 }
 
-static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int dw_msi_setup_irq(struct pci_dev *pdev,
 			struct msi_desc *desc)
 {
 	int irq, pos, msgvec;
@@ -383,7 +383,7 @@ static int dw_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void dw_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void dw_msi_teardown_irq(unsigned int irq)
 {
 	clear_irq(irq);
 }
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 4884ee5..647bc9f 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -615,9 +615,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
+static int rcar_msi_setup_irq(struct pci_dev *pdev,
 			      struct msi_desc *desc)
 {
+	struct msi_chip *chip = pdev->bus->msi;
 	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip);
 	struct msi_msg msg;
@@ -645,10 +646,11 @@ static int rcar_msi_setup_irq(struct msi_chip *chip, struct pci_dev *pdev,
 	return 0;
 }
 
-static void rcar_msi_teardown_irq(struct msi_chip *chip, unsigned int irq)
+static void rcar_msi_teardown_irq(unsigned int irq)
 {
-	struct rcar_msi *msi = to_rcar_msi(chip);
 	struct irq_data *d = irq_get_irq_data(irq);
+	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct rcar_msi *msi = to_rcar_msi(chip);
 
 	rcar_msi_free(msi, d->hwirq);
 }
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index aae2fc8..51d7e62 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -37,7 +37,7 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (!chip || !chip->setup_irq)
 		return -EINVAL;
 
-	err = chip->setup_irq(chip, dev, desc);
+	err = chip->setup_irq(dev, desc);
 	if (err < 0)
 		return err;
 
@@ -53,7 +53,7 @@ void __weak arch_teardown_msi_irq(unsigned int irq)
 	if (!chip || !chip->teardown_irq)
 		return;
 
-	chip->teardown_irq(chip, irq);
+	chip->teardown_irq(irq);
 }
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 36c63cf..45ef8cb 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -68,9 +68,8 @@ struct msi_chip {
 	struct device_node *of_node;
 	struct list_head list;
 
-	int (*setup_irq)(struct msi_chip *chip, struct pci_dev *dev,
-			 struct msi_desc *desc);
-	void (*teardown_irq)(struct msi_chip *chip, unsigned int irq);
+	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	void (*teardown_irq)(unsigned int irq);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
CC: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
CC: Thomas Petazzoni <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

Currently, PCI drivers will initialize bus->msi in
pcibios_add_bus(). pcibios_add_bus() will be called
in every pci bus initialization. So the bus->msi
assignment in pci_alloc_child_bus() is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/probe.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e3cf8a2..8296576 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -677,7 +677,6 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	child->parent = parent;
 	child->ops = parent->ops;
-	child->msi = parent->msi;
 	child->sysdata = parent->sysdata;
 	child->bus_flags = parent->bus_flags;
 
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

Currently, pcie-designware, pcie-rcar, pci-tegra drivers
use irq chip_data to save the msi_chip pointer. They
already call irq_set_chip_data() in their own MSI irq map
functions. So irq_set_chip_data() in arch_setup_msi_irq()
is useless.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 51d7e62..50f67a3 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	if (err < 0)
 		return err;
 
-	irq_set_chip_data(desc->irq, chip);
-
 	return 0;
 }
 
 void __weak arch_teardown_msi_irq(unsigned int irq)
 {
-	struct msi_chip *chip = irq_get_chip_data(irq);
+	struct msi_desc *entry = irq_get_msi_desc(irq);
+	struct msi_chip *chip = entry->dev->bus->msi;
 
 	if (!chip || !chip->teardown_irq)
 		return;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Acked-by: David Vrabel <david.vrabel-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
CC: Konrad Rzeszutek Wilk <konrad.wilk-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
and arch_msi_mask_irq() to fix a bug found when running xen in x86.
Introduced these two funcntions make MSI code complex. And mask/unmask
is the irq actions related to interrupt controller, should not use
weak arch functions to override mask/unmask interfaces. This patch
reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
bug for simplicity. Also this is preparation for using struct
msi_chip instead of weak arch MSI functions in all platforms.
Keep default_msi_mask_irq() and default_msix_mask_irq() in
linux/msi.h to make s390 MSI code compile happy, they wiil be removed
in the later patch.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/include/asm/apic.h     |    4 ++++
 arch/x86/include/asm/x86_init.h |    3 ---
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   10 ----------
 arch/x86/pci/xen.c              |   16 ++++++----------
 drivers/pci/msi.c               |   22 ++++++----------------
 include/linux/msi.h             |    6 ++++--
 7 files changed, 21 insertions(+), 42 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 465b309..47a5f94 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -43,6 +43,10 @@ static inline void generic_apic_probe(void)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI
+extern struct irq_chip msi_chip;
+#endif
+
 #ifdef CONFIG_X86_LOCAL_APIC
 
 extern unsigned int apic_verbosity;
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index e45e4da..f58a9c7 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -172,7 +172,6 @@ struct x86_platform_ops {
 
 struct pci_dev;
 struct msi_msg;
-struct msi_desc;
 
 struct x86_msi_ops {
 	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
@@ -183,8 +182,6 @@ struct x86_msi_ops {
 	void (*teardown_msi_irqs)(struct pci_dev *dev);
 	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
-	u32 (*msi_mask_irq)(struct msi_desc *desc, u32 mask, u32 flag);
-	u32 (*msix_mask_irq)(struct msi_desc *desc, u32 flag);
 };
 
 struct IO_APIC_route_entry;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e877cfb..2a2ec28 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3161,7 +3161,7 @@ msi_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
  * which implement the MSI or MSI-X Capability Structure.
  */
-static struct irq_chip msi_chip = {
+struct irq_chip msi_chip = {
 	.name			= "PCI-MSI",
 	.irq_unmask		= unmask_msi_irq,
 	.irq_mask		= mask_msi_irq,
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e48b674..234b072 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -116,8 +116,6 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs	= default_teardown_msi_irqs,
 	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
-	.msi_mask_irq		= default_msi_mask_irq,
-	.msix_mask_irq		= default_msix_mask_irq,
 };
 
 /* MSI arch specific hooks */
@@ -140,14 +138,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev)
 {
 	x86_msi.restore_msi_irqs(dev);
 }
-u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return x86_msi.msi_mask_irq(desc, mask, flag);
-}
-u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return x86_msi.msix_mask_irq(desc, flag);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ad03739..84c2fce 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -394,13 +394,9 @@ static void xen_teardown_msi_irq(unsigned int irq)
 {
 	xen_destroy_irq(irq);
 }
-static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return 0;
-}
-static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
+
+void xen_nop_msi_mask(struct irq_data *data)
 {
-	return 0;
 }
 #endif
 
@@ -425,8 +421,8 @@ int __init pci_xen_init(void)
 	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	return 0;
 }
@@ -506,8 +502,8 @@ int __init pci_xen_initial_domain(void)
 	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
 	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
 	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
-	x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
-	x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
+	msi_chip.irq_mask = xen_nop_msi_mask;
+	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
 	xen_setup_acpi_sci();
 	__acpi_register_gsi = acpi_register_gsi_xen;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 50f67a3..5f8f3af 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
  * reliably as devices without an INTx disable bit will then generate a
  * level IRQ which will never be cleared.
  */
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 
@@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
-{
-	return default_msi_mask_irq(desc, mask, flag);
-}
-
 static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
 {
-	desc->masked = arch_msi_mask_irq(desc, mask, flag);
+	desc->masked = __msi_mask_irq(desc, mask, flag);
 }
 
 /*
@@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
  * file.  This saves a few milliseconds when initialising devices with lots
  * of MSI-X interrupts.
  */
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
 	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
@@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
 	return mask_bits;
 }
 
-__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
-{
-	return default_msix_mask_irq(desc, flag);
-}
-
 static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 {
-	desc->masked = arch_msix_mask_irq(desc, flag);
+	desc->masked = __msix_mask_irq(desc, flag);
 }
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
@@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI unmasked as initial states */
 	mask = msi_mask(desc->msi_attrib.multi_cap);
 	/* Keep cached state to be restored */
-	arch_msi_mask_irq(desc, mask, ~mask);
+	__msi_mask_irq(desc, mask, ~mask);
 
 	/* Restore dev->irq to its default pin-assertion irq */
 	dev->irq = desc->msi_attrib.default_irq;
@@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
 	/* Return the device with MSI-X masked as initial states */
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		/* Keep cached states to be restored */
-		arch_msix_mask_irq(entry, 1);
+		__msix_mask_irq(entry, 1);
 	}
 
 	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 45ef8cb..cc46a62 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
 void write_msi_msg(unsigned int irq, struct msi_msg *msg);
+u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
+u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
 
 struct msi_desc {
 	struct {
@@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
-u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
+#define default_msi_mask_irq	__msi_mask_irq
+#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 05/22] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()

[Yijing Wang]

Now only s390/MSI use default_msi_mask_irq() and
default_msix_mask_irq(), replace them with the common
msi mask irq functions __msi_mask_irq() and __msix_mask_irq().
Remove default_msi_mask_irq() and default_msix_mask_irq().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/s390/pci/pci.c |    4 ++--
 include/linux/msi.h |    2 --
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 2fa7b14..552b990 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -448,9 +448,9 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	/* Release MSI interrupts */
 	list_for_each_entry(msi, &pdev->msi_list, list) {
 		if (msi->msi_attrib.is_msix)
-			default_msix_mask_irq(msi, 1);
+			__msix_mask_irq(msi, 1);
 		else
-			default_msi_mask_irq(msi, 1, 1);
+			__msi_mask_irq(msi, 1, 1);
 		irq_set_msi_desc(msi->irq, NULL);
 		irq_free_desc(msi->irq);
 		msi->msg.address_lo = 0;
diff --git a/include/linux/msi.h b/include/linux/msi.h
index cc46a62..6fdc5c6 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -61,8 +61,6 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
 
 void default_teardown_msi_irqs(struct pci_dev *dev);
 void default_restore_msi_irqs(struct pci_dev *dev);
-#define default_msi_mask_irq	__msi_mask_irq
-#define default_msix_mask_irq	__msix_mask_irq
 
 struct msi_chip {
 	struct module *owner;
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

Introduce weak arch_find_msi_chip() to find the match msi_chip.
Currently, MSI chip associates pci bus to msi_chip. Because in
ARM platform, there may be more than one MSI controller in system.
Associate pci bus to msi_chip help pci device to find the match
msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
like in x86. we only need one MSI chip, because all device use
the same MSI address/data and irq etc. So it's no need to associate
pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
to return the MSI chip for simplicity. The default weak
arch_find_msi_chip() used in ARM platform, find the MSI chip
by pci bus.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/pci/msi.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 5f8f3af..3acbe65 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -29,9 +29,14 @@ static int pci_msi_enable = 1;
 
 /* Arch hooks */
 
+struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
+{
+	return dev->bus->msi;
+}
+
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
-	struct msi_chip *chip = dev->bus->msi;
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	int err;
 
 	if (!chip || !chip->setup_irq)
-- 
1.7.1

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 07/22] PCI/MSI: Refactor struct msi_chip to make it become more common

[Yijing Wang]

Now there are a lot of __weak arch functions in MSI code.
These functions make MSI driver complex. Thierry Reding Introduced
a new MSI chip framework to configure MSI/MSI-X irq in ARM. Use
the new MSI chip framework to refactor all other platform MSI
arch code to eliminate weak arch MSI functions. This patch add
.restore_irq() and .setup_irqs() to make it become more common.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/msi.c   |   15 +++++++++++++++
 include/linux/msi.h |    3 +++
 2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 3acbe65..d10edee 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -64,6 +64,11 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (chip && chip->setup_irqs)
+		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
@@ -106,6 +111,11 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 
 void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
 	return default_teardown_msi_irqs(dev);
 }
 
@@ -129,6 +139,11 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 
 void __weak arch_restore_msi_irqs(struct pci_dev *dev)
 {
+	struct msi_chip *chip = arch_find_msi_chip(dev);
+
+	if (chip && chip->restore_irqs)
+		return chip->restore_irqs(dev);
+
 	return default_restore_msi_irqs(dev);
 }
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 6fdc5c6..4cf1f31 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -69,7 +69,10 @@ struct msi_chip {
 	struct list_head list;
 
 	int (*setup_irq)(struct pci_dev *dev, struct msi_desc *desc);
+	int (*setup_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*teardown_irq)(unsigned int irq);
+	void (*teardown_irqs)(struct pci_dev *dev);
+	void (*restore_irqs)(struct pci_dev *dev);
 };
 
 #endif /* LINUX_MSI_H */
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 08/22] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h     |    1 +
 arch/x86/kernel/apic/io_apic.c |   12 ++++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 0892ea0..878a06d 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -101,6 +101,7 @@ void native_teardown_msi_irq(unsigned int irq);
 void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
+extern struct msi_chip *x86_msi_chip;
 #else
 #define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a2ec28..882b95e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3337,6 +3337,18 @@ int default_setup_hpet_msi(unsigned int irq, unsigned int id)
 }
 #endif
 
+struct msi_chip apic_msi_chip = {
+	.setup_irqs = native_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return x86_msi_chip;
+}
+
+struct msi_chip *x86_msi_chip = &apic_msi_chip;
+
 #endif /* CONFIG_PCI_MSI */
 /*
  * Hypertransport interrupt support
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq == 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq == 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq == 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq == 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq == 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 09/22] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 arch/x86/pci/xen.c |   46 ++++++++++++++++++++++++++++++----------------
 1 files changed, 30 insertions(+), 16 deletions(-)

diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 84c2fce..e669ee4 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -376,6 +376,11 @@ static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
 }
 #endif
 
+static void xen_teardown_msi_irq(unsigned int irq)
+{
+	xen_destroy_irq(irq);
+}
+
 static void xen_teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *msidesc;
@@ -385,19 +390,26 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
 		xen_pci_frontend_disable_msix(dev);
 	else
 		xen_pci_frontend_disable_msi(dev);
-
-	/* Free the IRQ's and the msidesc using the generic code. */
-	default_teardown_msi_irqs(dev);
-}
-
-static void xen_teardown_msi_irq(unsigned int irq)
-{
-	xen_destroy_irq(irq);
+	
+	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		int i, nvec;
+		if (msidesc->irq == 0)
+			continue;
+		if (msidesc->nvec_used)
+			nvec = msidesc->nvec_used;
+		else
+			nvec = 1 << msidesc->msi_attrib.multiple;
+		for (i = 0; i < nvec; i++)
+			xen_teardown_msi_irq(msidesc->irq + i);
+	}
 }
 
 void xen_nop_msi_mask(struct irq_data *data)
 {
 }
+
+struct msi_chip xen_msi_chip;
+
 #endif
 
 int __init pci_xen_init(void)
@@ -418,9 +430,9 @@ int __init pci_xen_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_setup_msi_irqs;
+	xen_msi_chip.teardown_irqs = xen_teardown_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
@@ -441,8 +453,9 @@ int __init pci_xen_hvm_init(void)
 #endif
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+	xen_msi_chip.setup_irqs = xen_hvm_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	x86_msi_chip = &xen_msi_chip;
 #endif
 	return 0;
 }
@@ -499,9 +512,10 @@ int __init pci_xen_initial_domain(void)
 	int irq;
 
 #ifdef CONFIG_PCI_MSI
-	x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
-	x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
-	x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+	xen_msi_chip.setup_irqs = xen_initdom_setup_msi_irqs;
+	xen_msi_chip.teardown_irq = xen_teardown_msi_irq;
+	xen_msi_chip.restore_irqs = xen_initdom_restore_msi_irqs;
+	x86_msi_chip = &xen_msi_chip;
 	msi_chip.irq_mask = xen_nop_msi_mask;
 	msi_chip.irq_unmask = xen_nop_msi_mask;
 #endif
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 10/22] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 drivers/iommu/irq_remapping.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 33c4395..7929590 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -148,6 +148,11 @@ static int irq_remapping_setup_msi_irqs(struct pci_dev *dev,
 		return do_setup_msix_irqs(dev, nvec);
 }
 
+static struct msi_chip remap_msi_chip = {
+	.setup_irqs = irq_remapping_setup_msi_irqs,
+	.teardown_irq = native_teardown_msi_irq,
+};
+
 static void eoi_ioapic_pin_remapped(int apic, int pin, int vector)
 {
 	/*
@@ -168,6 +173,7 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
+	x86_msi_chip = &remap_msi_chip;
 }
 
 static __init int setup_nointremap(char *str)
-- 
1.7.1

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 11/22] x86/MSI: Remove unused MSI weak arch functions

[Yijing Wang]

Now we can clean up MSI weak arch functions in x86.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/x86/include/asm/pci.h      |    3 ---
 arch/x86/include/asm/x86_init.h |    4 ----
 arch/x86/kernel/apic/io_apic.c  |    2 +-
 arch/x86/kernel/x86_init.c      |   24 ------------------------
 drivers/iommu/irq_remapping.c   |    1 -
 5 files changed, 1 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 878a06d..34f9676 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -96,14 +96,11 @@ extern void pci_iommu_alloc(void);
 #ifdef CONFIG_PCI_MSI
 /* implemented in arch/x86/kernel/apic/io_apic. */
 struct msi_desc;
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
 void native_teardown_msi_irq(unsigned int irq);
-void native_restore_msi_irqs(struct pci_dev *dev);
 int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 		  unsigned int irq_base, unsigned int irq_offset);
 extern struct msi_chip *x86_msi_chip;
 #else
-#define native_setup_msi_irqs		NULL
 #define native_teardown_msi_irq		NULL
 #endif
 
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index f58a9c7..2514f67 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -174,13 +174,9 @@ struct pci_dev;
 struct msi_msg;
 
 struct x86_msi_ops {
-	int (*setup_msi_irqs)(struct pci_dev *dev, int nvec, int type);
 	void (*compose_msi_msg)(struct pci_dev *dev, unsigned int irq,
 				unsigned int dest, struct msi_msg *msg,
 			       u8 hpet_id);
-	void (*teardown_msi_irq)(unsigned int irq);
-	void (*teardown_msi_irqs)(struct pci_dev *dev);
-	void (*restore_msi_irqs)(struct pci_dev *dev);
 	int  (*setup_hpet_msi)(unsigned int irq, unsigned int id);
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 882b95e..f998192 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3200,7 +3200,7 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc,
 	return 0;
 }
 
-int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *msidesc;
 	unsigned int irq;
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 234b072..cc32568 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -110,34 +110,10 @@ EXPORT_SYMBOL_GPL(x86_platform);
 
 #if defined(CONFIG_PCI_MSI)
 struct x86_msi_ops x86_msi = {
-	.setup_msi_irqs		= native_setup_msi_irqs,
 	.compose_msi_msg	= native_compose_msi_msg,
-	.teardown_msi_irq	= native_teardown_msi_irq,
-	.teardown_msi_irqs	= default_teardown_msi_irqs,
-	.restore_msi_irqs	= default_restore_msi_irqs,
 	.setup_hpet_msi		= default_setup_hpet_msi,
 };
 
-/* MSI arch specific hooks */
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
-{
-	return x86_msi.setup_msi_irqs(dev, nvec, type);
-}
-
-void arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.teardown_msi_irqs(dev);
-}
-
-void arch_teardown_msi_irq(unsigned int irq)
-{
-	x86_msi.teardown_msi_irq(irq);
-}
-
-void arch_restore_msi_irqs(struct pci_dev *dev)
-{
-	x86_msi.restore_msi_irqs(dev);
-}
 #endif
 
 struct x86_io_apic_ops x86_io_apic_ops = {
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 7929590..99b1c0f 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -170,7 +170,6 @@ static void __init irq_remapping_modify_x86_ops(void)
 	x86_io_apic_ops.set_affinity	= set_remapped_irq_affinity;
 	x86_io_apic_ops.setup_entry	= setup_ioapic_remapped_entry;
 	x86_io_apic_ops.eoi_ioapic_pin	= eoi_ioapic_pin_remapped;
-	x86_msi.setup_msi_irqs		= irq_remapping_setup_msi_irqs;
 	x86_msi.setup_hpet_msi		= setup_hpet_msi_remapped;
 	x86_msi.compose_msi_msg		= compose_remapped_msi_msg;
 	x86_msi_chip = &remap_msi_chip;
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start@logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-octeon.c |   35 ++++++++++++++++++++++-------------
 1 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..14f2d16 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -57,7 +57,7 @@ static int msi_irq_size;
  *
  * Returns 0 on success.
  */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int octeon_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	u16 control;
@@ -132,12 +132,12 @@ msi_irq_allocated:
 	/* Make sure the search for available interrupts didn't fail */
 	if (irq >= 64) {
 		if (request_private_bits) {
-			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
+			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
 			       1 << request_private_bits);
 			request_private_bits = 0;
 			goto try_only_one;
 		} else
-			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
+			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
 	}
 
 	/* MSI interrupts start at logical IRQ OCTEON_IRQ_MSI_BIT0 */
@@ -168,7 +168,7 @@ msi_irq_allocated:
 		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
 		break;
 	default:
-		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
+		panic("octeon_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
 	msg.data = irq - OCTEON_IRQ_MSI_BIT0;
 
@@ -182,7 +182,7 @@ msi_irq_allocated:
 	return 0;
 }
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int octeon_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
@@ -201,7 +201,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		return 1;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = octeon_setup_msi_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 	return 0;
 }
-
 /**
  * Called when a device no longer needs its MSI interrupts. All
  * MSI interrupts for the device are freed.
  *
  * @irq:    The devices first irq number. There may be multple in sequence.
  */
-void arch_teardown_msi_irq(unsigned int irq)
+static void octeon_teardown_msi_irq(unsigned int irq)
 {
 	int number_irqs;
 	u64 bitmask;
@@ -226,8 +225,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 	if ((irq < OCTEON_IRQ_MSI_BIT0)
 		|| (irq > msi_irq_size + OCTEON_IRQ_MSI_BIT0))
-		panic("arch_teardown_msi_irq: Attempted to teardown illegal "
-		      "MSI interrupt (%d)", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown illegal "
+			"MSI interrupt (%d)", irq);
 
 	irq -= OCTEON_IRQ_MSI_BIT0;
 	index = irq / 64;
@@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
 	 */
 	number_irqs = 0;
 	while ((irq0 + number_irqs < 64) &&
-	       (msi_multiple_irq_bitmask[index]
+		(msi_multiple_irq_bitmask[index]
 		& (1ull << (irq0 + number_irqs))))
 		number_irqs++;
 	number_irqs++;
@@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
 	/* Shift the mask to the correct bit location */
 	bitmask <<= irq0;
 	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
-		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
-		      "interrupt (%d) not in use", irq);
+		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
+			"interrupt (%d) not in use", irq);
 
 	/* Checks are done, update the in use bitmask */
 	spin_lock(&msi_free_irq_bitmask_lock);
@@ -259,6 +258,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	spin_unlock(&msi_free_irq_bitmask_lock);
 }
 
+static struct msi_chip octeon_msi_chip = {
+	.setup_irqs = octeon_setup_msi_irqs,
+	.teardown_irq = octeon_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &octeon_msi_chip;
+}
+
 static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
 
 static u64 msi_rcv_reg[4];
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 13/22] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error

[Yijing Wang]

Commit 465665f78a7 ("mips: Kill pointless destroy_irq()") removed
the destroy_irq(). So remove the leftover one in xlp_setup_msix()
to fix build error.

arch/mips/pci/msi-xlp.c: In function 'xlp_setup_msix':
arch/mips/pci/msi-xlp.c:447:3: error: implicit declaration of function 'destroy_irq'..
cc1: some warnings being treated as errors
make[1]: *** [arch/mips/pci/msi-xlp.o] Error 1
make: *** [arch/mips/pci/] Error 2

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
---
 arch/mips/pci/msi-xlp.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..e469dc7 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	msg.data = 0xc00 | msixvec;
 
 	ret = irq_set_msi_desc(xirq, desc);
-	if (ret < 0) {
-		destroy_irq(xirq);
+	if (ret < 0) 
 		return ret;
-	}
 
 	write_msi_msg(xirq, &msg);
 	return 0;
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index e469dc7..6b791ef 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
 	.irq_unmask	= unmask_msi_irq,
 };
 
-void arch_teardown_msi_irq(unsigned int irq)
+void xlp_teardown_msi_irq(unsigned int irq)
 {
 }
 
@@ -450,7 +450,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 	return 0;
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+static int xlp_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct pci_dev *lnkdev;
 	uint64_t lnkbase;
@@ -472,6 +472,16 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 		return xlp_setup_msi(lnkbase, node, link, desc);
 }
 
+static struct msi_chip xlp_chip = {
+	.setup_irq = xlp_setup_msi_irq,
+	.teardown_irq = xlp_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlp_chip;
+}
+
 void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/mips/pci/pci-xlr.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..7bd91cc 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PCI_MSI
-void arch_teardown_msi_irq(unsigned int irq)
+void xlr_teardown_msi_irq(unsigned int irq)
 {
 }
 
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
+int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
 	struct pci_dev *lnk;
@@ -263,6 +263,17 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 	write_msi_msg(irq, &msg);
 	return 0;
 }
+
+static struct msi_chip xlr_msi_chip = {
+	.setup_irq = xlr_setup_msi_irq,
+	.teardown_irq = xlr_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &xlr_msi_chip;
+}
+
 #endif
 
 /* Extra ACK needed for XLR on chip PCI controller */
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 16/22] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/kernel/msi.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 71bd161..01781a4 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -13,7 +13,7 @@
 
 #include <asm/machdep.h>
 
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int ppc_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) {
 		pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
@@ -27,7 +27,17 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return ppc_md.setup_msi_irqs(dev, nvec, type);
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *dev)
+static void ppc_teardown_msi_irqs(struct pci_dev *dev)
 {
 	ppc_md.teardown_msi_irqs(dev);
 }
+
+static struct msi_chip ppc_msi_chip = {
+	.setup_irqs = ppc_setup_msi_irqs,
+	.teardown_irqs = ppc_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &ppc_msi_chip;
+}
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
---
 arch/s390/pci/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 552b990..da5316e 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 	}
 }
 
-int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	unsigned int hwirq, msi_vecs;
@@ -434,7 +434,7 @@ out:
 	return rc;
 }
 
-void arch_teardown_msi_irqs(struct pci_dev *pdev)
+static void zpci_teardown_msi_irqs(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = get_zdev(pdev);
 	struct msi_desc *msi;
@@ -464,6 +464,16 @@ void arch_teardown_msi_irqs(struct pci_dev *pdev)
 	airq_iv_free_bit(zpci_aisb_iv, zdev->aisb);
 }
 
+static struct msi_chip zpci_msi_chip = {
+	.setup_irqs = zpci_setup_msi_irqs,
+	.teardown_irqs = zpci_teardown_msi_irqs,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &zpci_msi_chip;
+}
+
 static void zpci_map_resources(struct zpci_dev *zdev)
 {
 	struct pci_dev *pdev = zdev->pdev;
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 18/22] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/arm/mach-iop13xx/include/mach/pci.h |    2 ++
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 +++++++--
 arch/arm/mach-iop13xx/pci.c              |    6 ++++++
 5 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
index 59f42b5..7a073cb 100644
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -10,6 +10,8 @@ struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
 void iop13xx_atu_select(struct hw_pci *plat_pci);
 void iop13xx_pci_init(void);
 void iop13xx_map_pci_memory(void);
+void iop13xx_add_bus(struct pci_bus *bus);
+extern struct msi_chip iop13xx_msi_chip;
 
 #define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
 			       PCI_STATUS_SIG_TARGET_ABORT | \
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d3..19d47cb 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -59,6 +59,7 @@ static struct hw_pci iq81340mc_pci __initdata = {
 	.map_irq	= iq81340mc_pcix_map_irq,
 	.scan		= iop13xx_scan_bus,
 	.preinit	= iop13xx_pci_init,
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340mc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11c..4d56993 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -61,6 +61,7 @@ static struct hw_pci iq81340sc_pci __initdata = {
 	.scan		= iop13xx_scan_bus,
 	.map_irq	= iq81340sc_atux_map_irq,
 	.preinit	= iop13xx_pci_init
+	.add_bus	= iop13xx_add_bus;
 };
 
 static int __init iq81340sc_pci_init(void)
diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c
index e7730cf..1a8cb2f 100644
--- a/arch/arm/mach-iop13xx/msi.c
+++ b/arch/arm/mach-iop13xx/msi.c
@@ -132,7 +132,7 @@ static struct irq_chip iop13xx_msi_chip = {
 	.irq_unmask = unmask_msi_irq,
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int iop13xx_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1);
 	struct msi_msg msg;
@@ -159,7 +159,12 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return 0;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void iop13xx_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_desc(irq);
 }
+
+struct msi_chip iop13xx_chip = {
+	.setup_irq = iop13xx_setup_msi_irq,
+	.teardown_irq = iop13xx_teardown_msi_irq,
+};
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84..f498800 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -962,6 +962,12 @@ void __init iop13xx_atu_select(struct hw_pci *plat_pci)
 	}
 }
 
+void iop13xx_add_bus(struct pci_bus *bus)
+{
+	if (IS_ENABLED(CONFIG_PCI_MSI)) 
+		bus->msi = &iop13xx_msi_chip;
+}
+
 void __init iop13xx_pci_init(void)
 {
 	/* clear pre-existing south bridge errors */
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 19/22] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/ia64/kernel/msi_ia64.c |   18 ++++++++++++++----
 1 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index 4efe748..55ac859 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -112,15 +112,15 @@ static struct irq_chip ia64_msi_chip = {
 };
 
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int arch_ia64_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	if (platform_setup_msi_irq)
-		return platform_setup_msi_irq(pdev, desc);
+		return platform_setup_msi_irq(dev, desc);
 
-	return ia64_setup_msi_irq(pdev, desc);
+	return ia64_setup_msi_irq(dev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+static void arch_ia64_teardown_msi_irq(unsigned int irq)
 {
 	if (platform_teardown_msi_irq)
 		return platform_teardown_msi_irq(irq);
@@ -128,6 +128,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	return ia64_teardown_msi_irq(irq);
 }
 
+static struct msi_chip chip = {
+	.setup_irq = arch_ia64_setup_msi_irq,
+	.teardown_irq = arch_ia64_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &chip;
+}
+
 #ifdef CONFIG_INTEL_IOMMU
 #ifdef CONFIG_SMP
 static int dmar_msi_set_affinity(struct irq_data *data,
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 20/22] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/sparc/kernel/pci.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index b36365f..2a89ee2 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -905,7 +905,7 @@ int pci_domain_nr(struct pci_bus *pbus)
 EXPORT_SYMBOL(pci_domain_nr);
 
 #ifdef CONFIG_PCI_MSI
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+int sparc_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	unsigned int irq;
@@ -916,7 +916,7 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 	return pbm->setup_msi_irq(&irq, pdev, desc);
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void sparc_teardown_msi_irq(unsigned int irq)
 {
 	struct msi_desc *entry = irq_get_msi_desc(irq);
 	struct pci_dev *pdev = entry->dev;
@@ -925,6 +925,16 @@ void arch_teardown_msi_irq(unsigned int irq)
 	if (pbm->teardown_msi_irq)
 		pbm->teardown_msi_irq(irq, pdev);
 }
+
+static struct msi_chip sparc_msi_chip = {
+	.setup_irq = sparc_setup_msi_irq,
+	.teardown_irq = sparc_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &sparc_msi_chip;
+}
 #endif /* !(CONFIG_PCI_MSI) */
 
 static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 21/22] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

Use MSI chip framework instead of arch MSI functions to configure
MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
---
 arch/tile/kernel/pci_gx.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index e39f9c5..4912b75 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1485,7 +1485,7 @@ static struct irq_chip tilegx_msi_chip = {
 	/* TBD: support set_affinity. */
 };
 
-int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
+static int tile_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
 {
 	struct pci_controller *controller;
 	gxio_trio_context_t *trio_context;
@@ -1604,7 +1604,17 @@ is_64_failure:
 	return ret;
 }
 
-void arch_teardown_msi_irq(unsigned int irq)
+void tile_teardown_msi_irq(unsigned int irq)
 {
 	irq_free_hwirq(irq);
 }
+
+static struct msi_chip tile_msi_chip = {
+	.setup_irq = tile_setup_msi_irq,
+	.teardown_irq = tile_teardown_msi_irq,
+};
+
+struct msi_chip *arch_find_msi_chip(struct pci_dev *dev)
+{
+	return &tile_msi_chip;
+}
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

[PATCH v2 22/22] PCI/MSI: Clean up unused MSI arch functions

[Yijing Wang]

Now we use struct msi_chip in all platforms to configure
MSI/MSI-X. We can clean up the unused arch functions.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/iommu/irq_remapping.c |    2 +-
 drivers/pci/msi.c             |  100 +++++++++++++++-------------------------
 include/linux/msi.h           |   14 ------
 3 files changed, 39 insertions(+), 77 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 99b1c0f..6e645f0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -92,7 +92,7 @@ error:
 
 	/*
 	 * Restore altered MSI descriptor fields and prevent just destroyed
-	 * IRQs from tearing down again in default_teardown_msi_irqs()
+	 * IRQs from tearing down again in teardown_msi_irqs()
 	 */
 	msidesc->irq = 0;
 	msidesc->nvec_used = 0;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d10edee..9fe427f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -34,51 +34,31 @@ struct msi_chip * __weak arch_find_msi_chip(struct pci_dev *dev)
 	return dev->bus->msi;
 }
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-	int err;
-
-	if (!chip || !chip->setup_irq)
-		return -EINVAL;
-
-	err = chip->setup_irq(dev, desc);
-	if (err < 0)
-		return err;
-
-	return 0;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-	struct msi_desc *entry = irq_get_msi_desc(irq);
-	struct msi_chip *chip = entry->dev->bus->msi;
-
-	if (!chip || !chip->teardown_irq)
-		return;
-
-	chip->teardown_irq(irq);
-}
-
-int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+int setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
 	struct msi_desc *entry;
 	int ret;
 	struct msi_chip *chip;
 
 	chip = arch_find_msi_chip(dev);
-	if (chip && chip->setup_irqs)
+	if (!chip)
+		return -EINVAL;
+
+	if (chip->setup_irqs)
 		return chip->setup_irqs(dev, nvec, type);
 
 	/*
 	 * If an architecture wants to support multiple MSI, it needs to
-	 * override arch_setup_msi_irqs()
+	 * implement chip->setup_irqs().
 	 */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
 		return 1;
 
+	if (!chip->setup_irq)
+		return -EINVAL;
+
 	list_for_each_entry(entry, &dev->msi_list, list) {
-		ret = arch_setup_msi_irq(dev, entry);
+		ret = chip->setup_irq(dev, entry);
 		if (ret < 0)
 			return ret;
 		if (ret > 0)
@@ -88,13 +68,20 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 }
 
-/*
- * We have a default implementation available as a separate non-weak
- * function, as it is used by the Xen x86 PCI code
- */
-void default_teardown_msi_irqs(struct pci_dev *dev)
+static void teardown_msi_irqs(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
+	struct msi_chip *chip;
+
+	chip = arch_find_msi_chip(dev);
+	if (!chip)
+		return;
+
+	if (chip->teardown_irqs)
+		return chip->teardown_irqs(dev);
+
+	if (!chip->teardown_irq)
+		return;
 
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		int i, nvec;
@@ -105,20 +92,10 @@ void default_teardown_msi_irqs(struct pci_dev *dev)
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
 		for (i = 0; i < nvec; i++)
-			arch_teardown_msi_irq(entry->irq + i);
+			chip->teardown_irq(entry->irq + i);
 	}
 }
 
-void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_chip *chip = arch_find_msi_chip(dev);
-
-	if (chip && chip->teardown_irqs)
-		return chip->teardown_irqs(dev);
-
-	return default_teardown_msi_irqs(dev);
-}
-
 static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 {
 	struct msi_desc *entry;
@@ -137,10 +114,18 @@ static void default_restore_msi_irq(struct pci_dev *dev, int irq)
 		write_msi_msg(irq, &entry->msg);
 }
 
-void __weak arch_restore_msi_irqs(struct pci_dev *dev)
+static void default_restore_msi_irqs(struct pci_dev *dev)
 {
-	struct msi_chip *chip = arch_find_msi_chip(dev);
+	struct msi_desc *entry = NULL;
+
+	list_for_each_entry(entry, &dev->msi_list, list) {
+		default_restore_msi_irq(dev, entry->irq);
+	}
+}
 
+static void restore_msi_irqs(struct pci_dev *dev)
+{
+	struct msi_chip *chip = arch_find_msi_chip(dev);
 	if (chip && chip->restore_irqs)
 		return chip->restore_irqs(dev);
 
@@ -249,15 +234,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }
 
-void default_restore_msi_irqs(struct pci_dev *dev)
-{
-	struct msi_desc *entry;
-
-	list_for_each_entry(entry, &dev->msi_list, list) {
-		default_restore_msi_irq(dev, entry->irq);
-	}
-}
-
 void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -361,7 +337,7 @@ static void free_msi_irqs(struct pci_dev *dev)
 			BUG_ON(irq_has_action(entry->irq + i));
 	}
 
-	arch_teardown_msi_irqs(dev);
+	teardown_msi_irqs(dev);
 
 	list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
 		if (entry->msi_attrib.is_msix) {
@@ -420,7 +396,7 @@ static void __pci_restore_msi_state(struct pci_dev *dev)
 
 	pci_intx_for_msi(dev, 0);
 	msi_set_enable(dev, 0);
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
 	msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap),
@@ -443,7 +419,7 @@ static void __pci_restore_msix_state(struct pci_dev *dev)
 	msix_clear_and_set_ctrl(dev, 0,
 				PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL);
 
-	arch_restore_msi_irqs(dev);
+	restore_msi_irqs(dev);
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		msix_mask_irq(entry, entry->masked);
 	}
@@ -613,7 +589,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)
 	list_add_tail(&entry->list, &dev->msi_list);
 
 	/* Configure MSI capability structure */
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI);
 	if (ret) {
 		msi_mask_irq(entry, mask, ~mask);
 		free_msi_irqs(dev);
@@ -728,7 +704,7 @@ static int msix_capability_init(struct pci_dev *dev,
 	if (ret)
 		return ret;
 
-	ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
+	ret = setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
 	if (ret)
 		goto out_avail;
 
diff --git a/include/linux/msi.h b/include/linux/msi.h
index 4cf1f31..920ad52 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -48,20 +48,6 @@ struct msi_desc {
 	struct msi_msg msg;
 };
 
-/*
- * The arch hooks to setup up msi irqs. Those functions are
- * implemented as weak symbols so that they /can/ be overriden by
- * architecture specific code if needed.
- */
-int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
-void arch_teardown_msi_irq(unsigned int irq);
-int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type);
-void arch_teardown_msi_irqs(struct pci_dev *dev);
-void arch_restore_msi_irqs(struct pci_dev *dev);
-
-void default_teardown_msi_irqs(struct pci_dev *dev);
-void default_restore_msi_irqs(struct pci_dev *dev);
-
 struct msi_chip {
 	struct module *owner;
 	struct device *dev;
-- 
1.7.1

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 727 bytes --]

On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
> Currently, PCI drivers will initialize bus->msi in
> pcibios_add_bus(). pcibios_add_bus() will be called
> in every pci bus initialization. So the bus->msi
> assignment in pci_alloc_child_bus() is useless.

I think this should be the other way around. The default should be to
inherit bus->msi from the parent. That way drivers don't typically have
to do it, yet they can still opt to override it if they need to.

For Tegra for example I think it would work if we assigned the MSI chip
to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
can be removed altogether.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 727 bytes --]

On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
> Currently, PCI drivers will initialize bus->msi in
> pcibios_add_bus(). pcibios_add_bus() will be called
> in every pci bus initialization. So the bus->msi
> assignment in pci_alloc_child_bus() is useless.

I think this should be the other way around. The default should be to
inherit bus->msi from the parent. That way drivers don't typically have
to do it, yet they can still opt to override it if they need to.

For Tegra for example I think it would work if we assigned the MSI chip
to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
can be removed altogether.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 727 bytes --]

On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
> Currently, PCI drivers will initialize bus->msi in
> pcibios_add_bus(). pcibios_add_bus() will be called
> in every pci bus initialization. So the bus->msi
> assignment in pci_alloc_child_bus() is useless.

I think this should be the other way around. The default should be to
inherit bus->msi from the parent. That way drivers don't typically have
to do it, yet they can still opt to override it if they need to.

For Tegra for example I think it would work if we assigned the MSI chip
to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
can be removed altogether.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 727 bytes --]

On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
> Currently, PCI drivers will initialize bus->msi in
> pcibios_add_bus(). pcibios_add_bus() will be called
> in every pci bus initialization. So the bus->msi
> assignment in pci_alloc_child_bus() is useless.

I think this should be the other way around. The default should be to
inherit bus->msi from the parent. That way drivers don't typically have
to do it, yet they can still opt to override it if they need to.

For Tegra for example I think it would work if we assigned the MSI chip
to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
can be removed altogether.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
> Currently, PCI drivers will initialize bus->msi in
> pcibios_add_bus(). pcibios_add_bus() will be called
> in every pci bus initialization. So the bus->msi
> assignment in pci_alloc_child_bus() is useless.

I think this should be the other way around. The default should be to
inherit bus->msi from the parent. That way drivers don't typically have
to do it, yet they can still opt to override it if they need to.

For Tegra for example I think it would work if we assigned the MSI chip
to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
can be removed altogether.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/19df7d44/attachment.sig>

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 727 bytes --]

On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
> Currently, PCI drivers will initialize bus->msi in
> pcibios_add_bus(). pcibios_add_bus() will be called
> in every pci bus initialization. So the bus->msi
> assignment in pci_alloc_child_bus() is useless.

I think this should be the other way around. The default should be to
inherit bus->msi from the parent. That way drivers don't typically have
to do it, yet they can still opt to override it if they need to.

For Tegra for example I think it would work if we assigned the MSI chip
to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
can be removed altogether.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 727 bytes --]

On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
> Currently, PCI drivers will initialize bus->msi in
> pcibios_add_bus(). pcibios_add_bus() will be called
> in every pci bus initialization. So the bus->msi
> assignment in pci_alloc_child_bus() is useless.

I think this should be the other way around. The default should be to
inherit bus->msi from the parent. That way drivers don't typically have
to do it, yet they can still opt to override it if they need to.

For Tegra for example I think it would work if we assigned the MSI chip
to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
can be removed altogether.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 741 bytes --]

On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> argument.

That's not true. Out of the four drivers that you modify two use the
parameter. And the two that don't probably should be using it too.

50% is not "rarely". =)

>           We can look up msi_chip pointer by the device pointer
> or irq number, so clean up msi_chip argument.

I don't like this particular change. The idea was to keep the API object
oriented so that drivers wouldn't have to know where to get the MSI chip
from. It also makes it more resilient against code reorganizations since
the core code is the only place that needs to know where to get the chip
from.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 741 bytes --]

On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> argument.

That's not true. Out of the four drivers that you modify two use the
parameter. And the two that don't probably should be using it too.

50% is not "rarely". =)

>           We can look up msi_chip pointer by the device pointer
> or irq number, so clean up msi_chip argument.

I don't like this particular change. The idea was to keep the API object
oriented so that drivers wouldn't have to know where to get the MSI chip
from. It also makes it more resilient against code reorganizations since
the core code is the only place that needs to know where to get the chip
from.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 741 bytes --]

On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> argument.

That's not true. Out of the four drivers that you modify two use the
parameter. And the two that don't probably should be using it too.

50% is not "rarely". =)

>           We can look up msi_chip pointer by the device pointer
> or irq number, so clean up msi_chip argument.

I don't like this particular change. The idea was to keep the API object
oriented so that drivers wouldn't have to know where to get the MSI chip
from. It also makes it more resilient against code reorganizations since
the core code is the only place that needs to know where to get the chip
from.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 741 bytes --]

On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> argument.

That's not true. Out of the four drivers that you modify two use the
parameter. And the two that don't probably should be using it too.

50% is not "rarely". =)

>           We can look up msi_chip pointer by the device pointer
> or irq number, so clean up msi_chip argument.

I don't like this particular change. The idea was to keep the API object
oriented so that drivers wouldn't have to know where to get the MSI chip
from. It also makes it more resilient against code reorganizations since
the core code is the only place that needs to know where to get the chip
from.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> argument.

That's not true. Out of the four drivers that you modify two use the
parameter. And the two that don't probably should be using it too.

50% is not "rarely". =)

>           We can look up msi_chip pointer by the device pointer
> or irq number, so clean up msi_chip argument.

I don't like this particular change. The idea was to keep the API object
oriented so that drivers wouldn't have to know where to get the MSI chip
from. It also makes it more resilient against code reorganizations since
the core code is the only place that needs to know where to get the chip
from.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/b15c3bdc/attachment.sig>

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 741 bytes --]

On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> argument.

That's not true. Out of the four drivers that you modify two use the
parameter. And the two that don't probably should be using it too.

50% is not "rarely". =)

>           We can look up msi_chip pointer by the device pointer
> or irq number, so clean up msi_chip argument.

I don't like this particular change. The idea was to keep the API object
oriented so that drivers wouldn't have to know where to get the MSI chip
from. It also makes it more resilient against code reorganizations since
the core code is the only place that needs to know where to get the chip
from.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 741 bytes --]

On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> argument.

That's not true. Out of the four drivers that you modify two use the
parameter. And the two that don't probably should be using it too.

50% is not "rarely". =)

>           We can look up msi_chip pointer by the device pointer
> or irq number, so clean up msi_chip argument.

I don't like this particular change. The idea was to keep the API object
oriented so that drivers wouldn't have to know where to get the MSI chip
from. It also makes it more resilient against code reorganizations since
the core code is the only place that needs to know where to get the chip
from.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.

Again, I think this should be the other way around. If drivers do
something that's already handled by the core, then the duplicate code
should be dropped from the drivers.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.

Again, I think this should be the other way around. If drivers do
something that's already handled by the core, then the duplicate code
should be dropped from the drivers.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.

Again, I think this should be the other way around. If drivers do
something that's already handled by the core, then the duplicate code
should be dropped from the drivers.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.

Again, I think this should be the other way around. If drivers do
something that's already handled by the core, then the duplicate code
should be dropped from the drivers.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.

Again, I think this should be the other way around. If drivers do
something that's already handled by the core, then the duplicate code
should be dropped from the drivers.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/58aa4421/attachment-0001.sig>

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 491 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.

Again, I think this should be the other way around. If drivers do
something that's already handled by the core, then the duplicate code
should be dropped from the drivers.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 491 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.

Again, I think this should be the other way around. If drivers do
something that's already handled by the core, then the duplicate code
should be dropped from the drivers.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 925 bytes --]

On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

Can't x86 simply set the bus' .msi field anyway? It would seem to be
easy to do and unifies the code rather than driving it further apart
using even more of the __weak functions.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 925 bytes --]

On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

Can't x86 simply set the bus' .msi field anyway? It would seem to be
easy to do and unifies the code rather than driving it further apart
using even more of the __weak functions.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 925 bytes --]

On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

Can't x86 simply set the bus' .msi field anyway? It would seem to be
easy to do and unifies the code rather than driving it further apart
using even more of the __weak functions.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 925 bytes --]

On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

Can't x86 simply set the bus' .msi field anyway? It would seem to be
easy to do and unifies the code rather than driving it further apart
using even more of the __weak functions.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

Can't x86 simply set the bus' .msi field anyway? It would seem to be
easy to do and unifies the code rather than driving it further apart
using even more of the __weak functions.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/26bc4e3f/attachment.sig>

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 925 bytes --]

On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

Can't x86 simply set the bus' .msi field anyway? It would seem to be
easy to do and unifies the code rather than driving it further apart
using even more of the __weak functions.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 925 bytes --]

On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

Can't x86 simply set the bus' .msi field anyway? It would seem to be
easy to do and unifies the code rather than driving it further apart
using even more of the __weak functions.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1956 bytes --]

On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
[...]
> @@ -132,12 +132,12 @@ msi_irq_allocated:
>  	/* Make sure the search for available interrupts didn't fail */
>  	if (irq >= 64) {
>  		if (request_private_bits) {
> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>  			       1 << request_private_bits);

Perhaps while at it make this (and other similar changes in this patch):

	pr_err("%s(): Unable to ...", __func__, ...);

So that it becomes more resilient against this kind of rename?

>  			request_private_bits = 0;
>  			goto try_only_one;
>  		} else
> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");

> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  
>  	return 0;
>  }
> -

This...

> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	 */
>  	number_irqs = 0;
>  	while ((irq0 + number_irqs < 64) &&
> -	       (msi_multiple_irq_bitmask[index]
> +		(msi_multiple_irq_bitmask[index]

... and this seem like unrelated whitespace changes.

>  		& (1ull << (irq0 + number_irqs))))
>  		number_irqs++;
>  	number_irqs++;
> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	/* Shift the mask to the correct bit location */
>  	bitmask <<= irq0;
>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
> -		      "interrupt (%d) not in use", irq);
> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
> +			"interrupt (%d) not in use", irq);

And the second line here also needlessly changes the indentation.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 1956 bytes --]

On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
[...]
> @@ -132,12 +132,12 @@ msi_irq_allocated:
>  	/* Make sure the search for available interrupts didn't fail */
>  	if (irq >= 64) {
>  		if (request_private_bits) {
> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>  			       1 << request_private_bits);

Perhaps while at it make this (and other similar changes in this patch):

	pr_err("%s(): Unable to ...", __func__, ...);

So that it becomes more resilient against this kind of rename?

>  			request_private_bits = 0;
>  			goto try_only_one;
>  		} else
> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");

> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  
>  	return 0;
>  }
> -

This...

> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	 */
>  	number_irqs = 0;
>  	while ((irq0 + number_irqs < 64) &&
> -	       (msi_multiple_irq_bitmask[index]
> +		(msi_multiple_irq_bitmask[index]

... and this seem like unrelated whitespace changes.

>  		& (1ull << (irq0 + number_irqs))))
>  		number_irqs++;
>  	number_irqs++;
> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	/* Shift the mask to the correct bit location */
>  	bitmask <<= irq0;
>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
> -		      "interrupt (%d) not in use", irq);
> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
> +			"interrupt (%d) not in use", irq);

And the second line here also needlessly changes the indentation.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1956 bytes --]

On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
[...]
> @@ -132,12 +132,12 @@ msi_irq_allocated:
>  	/* Make sure the search for available interrupts didn't fail */
>  	if (irq >= 64) {
>  		if (request_private_bits) {
> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>  			       1 << request_private_bits);

Perhaps while at it make this (and other similar changes in this patch):

	pr_err("%s(): Unable to ...", __func__, ...);

So that it becomes more resilient against this kind of rename?

>  			request_private_bits = 0;
>  			goto try_only_one;
>  		} else
> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");

> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  
>  	return 0;
>  }
> -

This...

> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	 */
>  	number_irqs = 0;
>  	while ((irq0 + number_irqs < 64) &&
> -	       (msi_multiple_irq_bitmask[index]
> +		(msi_multiple_irq_bitmask[index]

... and this seem like unrelated whitespace changes.

>  		& (1ull << (irq0 + number_irqs))))
>  		number_irqs++;
>  	number_irqs++;
> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	/* Shift the mask to the correct bit location */
>  	bitmask <<= irq0;
>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
> -		      "interrupt (%d) not in use", irq);
> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
> +			"interrupt (%d) not in use", irq);

And the second line here also needlessly changes the indentation.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1956 bytes --]

On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
[...]
> @@ -132,12 +132,12 @@ msi_irq_allocated:
>  	/* Make sure the search for available interrupts didn't fail */
>  	if (irq >= 64) {
>  		if (request_private_bits) {
> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>  			       1 << request_private_bits);

Perhaps while at it make this (and other similar changes in this patch):

	pr_err("%s(): Unable to ...", __func__, ...);

So that it becomes more resilient against this kind of rename?

>  			request_private_bits = 0;
>  			goto try_only_one;
>  		} else
> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");

> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  
>  	return 0;
>  }
> -

This...

> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	 */
>  	number_irqs = 0;
>  	while ((irq0 + number_irqs < 64) &&
> -	       (msi_multiple_irq_bitmask[index]
> +		(msi_multiple_irq_bitmask[index]

... and this seem like unrelated whitespace changes.

>  		& (1ull << (irq0 + number_irqs))))
>  		number_irqs++;
>  	number_irqs++;
> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	/* Shift the mask to the correct bit location */
>  	bitmask <<= irq0;
>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
> -		      "interrupt (%d) not in use", irq);
> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
> +			"interrupt (%d) not in use", irq);

And the second line here also needlessly changes the indentation.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
[...]
> @@ -132,12 +132,12 @@ msi_irq_allocated:
>  	/* Make sure the search for available interrupts didn't fail */
>  	if (irq >= 64) {
>  		if (request_private_bits) {
> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>  			       1 << request_private_bits);

Perhaps while@it make this (and other similar changes in this patch):

	pr_err("%s(): Unable to ...", __func__, ...);

So that it becomes more resilient against this kind of rename?

>  			request_private_bits = 0;
>  			goto try_only_one;
>  		} else
> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");

> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  
>  	return 0;
>  }
> -

This...

> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	 */
>  	number_irqs = 0;
>  	while ((irq0 + number_irqs < 64) &&
> -	       (msi_multiple_irq_bitmask[index]
> +		(msi_multiple_irq_bitmask[index]

... and this seem like unrelated whitespace changes.

>  		& (1ull << (irq0 + number_irqs))))
>  		number_irqs++;
>  	number_irqs++;
> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	/* Shift the mask to the correct bit location */
>  	bitmask <<= irq0;
>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
> -		      "interrupt (%d) not in use", irq);
> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
> +			"interrupt (%d) not in use", irq);

And the second line here also needlessly changes the indentation.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/6d7f0108/attachment.sig>

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 1956 bytes --]

On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
[...]
> @@ -132,12 +132,12 @@ msi_irq_allocated:
>  	/* Make sure the search for available interrupts didn't fail */
>  	if (irq >= 64) {
>  		if (request_private_bits) {
> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>  			       1 << request_private_bits);

Perhaps while at it make this (and other similar changes in this patch):

	pr_err("%s(): Unable to ...", __func__, ...);

So that it becomes more resilient against this kind of rename?

>  			request_private_bits = 0;
>  			goto try_only_one;
>  		} else
> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");

> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  
>  	return 0;
>  }
> -

This...

> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	 */
>  	number_irqs = 0;
>  	while ((irq0 + number_irqs < 64) &&
> -	       (msi_multiple_irq_bitmask[index]
> +		(msi_multiple_irq_bitmask[index]

... and this seem like unrelated whitespace changes.

>  		& (1ull << (irq0 + number_irqs))))
>  		number_irqs++;
>  	number_irqs++;
> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	/* Shift the mask to the correct bit location */
>  	bitmask <<= irq0;
>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
> -		      "interrupt (%d) not in use", irq);
> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
> +			"interrupt (%d) not in use", irq);

And the second line here also needlessly changes the indentation.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1956 bytes --]

On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
[...]
> @@ -132,12 +132,12 @@ msi_irq_allocated:
>  	/* Make sure the search for available interrupts didn't fail */
>  	if (irq >= 64) {
>  		if (request_private_bits) {
> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>  			       1 << request_private_bits);

Perhaps while at it make this (and other similar changes in this patch):

	pr_err("%s(): Unable to ...", __func__, ...);

So that it becomes more resilient against this kind of rename?

>  			request_private_bits = 0;
>  			goto try_only_one;
>  		} else
> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");

> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>  
>  	return 0;
>  }
> -

This...

> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	 */
>  	number_irqs = 0;
>  	while ((irq0 + number_irqs < 64) &&
> -	       (msi_multiple_irq_bitmask[index]
> +		(msi_multiple_irq_bitmask[index]

... and this seem like unrelated whitespace changes.

>  		& (1ull << (irq0 + number_irqs))))
>  		number_irqs++;
>  	number_irqs++;
> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>  	/* Shift the mask to the correct bit location */
>  	bitmask <<= irq0;
>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
> -		      "interrupt (%d) not in use", irq);
> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
> +			"interrupt (%d) not in use", irq);

And the second line here also needlessly changes the indentation.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 834 bytes --]

On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
> Use MSI chip framework instead of arch MSI functions to configure
> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Nit: s/irq/IRQ/ in the above.

> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
> index e469dc7..6b791ef 100644
> --- a/arch/mips/pci/msi-xlp.c
> +++ b/arch/mips/pci/msi-xlp.c
> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>  	.irq_unmask	= unmask_msi_irq,
>  };
>  
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlp_teardown_msi_irq(unsigned int irq)

Should this not be static now as well?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 863 bytes --]

On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
> Use MSI chip framework instead of arch MSI functions to configure
> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Nit: s/irq/IRQ/ in the above.

> Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
> ---
>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
> index e469dc7..6b791ef 100644
> --- a/arch/mips/pci/msi-xlp.c
> +++ b/arch/mips/pci/msi-xlp.c
> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>  	.irq_unmask	= unmask_msi_irq,
>  };
>  
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlp_teardown_msi_irq(unsigned int irq)

Should this not be static now as well?

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 834 bytes --]

On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
> Use MSI chip framework instead of arch MSI functions to configure
> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Nit: s/irq/IRQ/ in the above.

> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
> index e469dc7..6b791ef 100644
> --- a/arch/mips/pci/msi-xlp.c
> +++ b/arch/mips/pci/msi-xlp.c
> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>  	.irq_unmask	= unmask_msi_irq,
>  };
>  
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlp_teardown_msi_irq(unsigned int irq)

Should this not be static now as well?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 834 bytes --]

On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
> Use MSI chip framework instead of arch MSI functions to configure
> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Nit: s/irq/IRQ/ in the above.

> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
> index e469dc7..6b791ef 100644
> --- a/arch/mips/pci/msi-xlp.c
> +++ b/arch/mips/pci/msi-xlp.c
> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>  	.irq_unmask	= unmask_msi_irq,
>  };
>  
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlp_teardown_msi_irq(unsigned int irq)

Should this not be static now as well?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
> Use MSI chip framework instead of arch MSI functions to configure
> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Nit: s/irq/IRQ/ in the above.

> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
> index e469dc7..6b791ef 100644
> --- a/arch/mips/pci/msi-xlp.c
> +++ b/arch/mips/pci/msi-xlp.c
> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>  	.irq_unmask	= unmask_msi_irq,
>  };
>  
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlp_teardown_msi_irq(unsigned int irq)

Should this not be static now as well?

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/299908c8/attachment.sig>

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 834 bytes --]

On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
> Use MSI chip framework instead of arch MSI functions to configure
> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Nit: s/irq/IRQ/ in the above.

> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
> index e469dc7..6b791ef 100644
> --- a/arch/mips/pci/msi-xlp.c
> +++ b/arch/mips/pci/msi-xlp.c
> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>  	.irq_unmask	= unmask_msi_irq,
>  };
>  
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlp_teardown_msi_irq(unsigned int irq)

Should this not be static now as well?

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 834 bytes --]

On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
> Use MSI chip framework instead of arch MSI functions to configure
> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.

Nit: s/irq/IRQ/ in the above.

> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
> index e469dc7..6b791ef 100644
> --- a/arch/mips/pci/msi-xlp.c
> +++ b/arch/mips/pci/msi-xlp.c
> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>  	.irq_unmask	= unmask_msi_irq,
>  };
>  
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlp_teardown_msi_irq(unsigned int irq)

Should this not be static now as well?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 559 bytes --]

On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
[...]
> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PCI_MSI
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlr_teardown_msi_irq(unsigned int irq)
>  {
>  }
>  
> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)

Can both of these now be static?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 559 bytes --]

On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
[...]
> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PCI_MSI
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlr_teardown_msi_irq(unsigned int irq)
>  {
>  }
>  
> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)

Can both of these now be static?

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 559 bytes --]

On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
[...]
> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PCI_MSI
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlr_teardown_msi_irq(unsigned int irq)
>  {
>  }
>  
> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)

Can both of these now be static?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 559 bytes --]

On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
[...]
> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PCI_MSI
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlr_teardown_msi_irq(unsigned int irq)
>  {
>  }
>  
> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)

Can both of these now be static?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
[...]
> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PCI_MSI
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlr_teardown_msi_irq(unsigned int irq)
>  {
>  }
>  
> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)

Can both of these now be static?

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/9b4b49ed/attachment-0001.sig>

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 559 bytes --]

On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
[...]
> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PCI_MSI
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlr_teardown_msi_irq(unsigned int irq)
>  {
>  }
>  
> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)

Can both of these now be static?

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 559 bytes --]

On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
[...]
> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>  }
>  
>  #ifdef CONFIG_PCI_MSI
> -void arch_teardown_msi_irq(unsigned int irq)
> +void xlr_teardown_msi_irq(unsigned int irq)
>  {
>  }
>  
> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)

Can both of these now be static?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 381 bytes --]

On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
[...]
> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>  	}
>  }
>  
> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

static?

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 381 bytes --]

On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
[...]
> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>  	}
>  }
>  
> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

static?

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 381 bytes --]

On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
[...]
> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>  	}
>  }
>  
> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

static?

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 381 bytes --]

On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
[...]
> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>  	}
>  }
>  
> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

static?

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
[...]
> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>  	}
>  }
>  
> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

static?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/7229facf/attachment.sig>

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 381 bytes --]

On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
[...]
> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>  	}
>  }
>  
> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

static?

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 381 bytes --]

On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
[...]
> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
[...]
> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>  	}
>  }
>  
> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

static?

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!

Apart from the comments to the individual patches I very much like where
this is going. Thanks for taking care of this.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!

Apart from the comments to the individual patches I very much like where
this is going. Thanks for taking care of this.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!

Apart from the comments to the individual patches I very much like where
this is going. Thanks for taking care of this.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!

Apart from the comments to the individual patches I very much like where
this is going. Thanks for taking care of this.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!

Apart from the comments to the individual patches I very much like where
this is going. Thanks for taking care of this.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/c9069230/attachment.sig>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 771 bytes --]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!

Apart from the comments to the individual patches I very much like where
this is going. Thanks for taking care of this.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!

Apart from the comments to the individual patches I very much like where
this is going. Thanks for taking care of this.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thomas Gleixner]

On Thu, 25 Sep 2014, Thierry Reding wrote:

> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> > Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> > argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
> >           We can look up msi_chip pointer by the device pointer
> > or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Right. We have the same thing in the irq_chip callbacks. All of them
take "struct irq_data", because it's already available in the core
code and it gives easy access to all information (chip, chipdata ...)
which is necessary for the callback implementations.

Thanks,

	tglx

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thomas Gleixner]

On Thu, 25 Sep 2014, Thierry Reding wrote:

> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> > Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> > argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
> >           We can look up msi_chip pointer by the device pointer
> > or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Right. We have the same thing in the irq_chip callbacks. All of them
take "struct irq_data", because it's already available in the core
code and it gives easy access to all information (chip, chipdata ...)
which is necessary for the callback implementations.

Thanks,

	tglx

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thomas Gleixner]

On Thu, 25 Sep 2014, Thierry Reding wrote:

> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> > Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> > argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
> >           We can look up msi_chip pointer by the device pointer
> > or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Right. We have the same thing in the irq_chip callbacks. All of them
take "struct irq_data", because it's already available in the core
code and it gives easy access to all information (chip, chipdata ...)
which is necessary for the callback implementations.

Thanks,

	tglx

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thomas Gleixner]

On Thu, 25 Sep 2014, Thierry Reding wrote:

> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> > Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> > argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
> >           We can look up msi_chip pointer by the device pointer
> > or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Right. We have the same thing in the irq_chip callbacks. All of them
take "struct irq_data", because it's already available in the core
code and it gives easy access to all information (chip, chipdata ...)
which is necessary for the callback implementations.

Thanks,

	tglx

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thomas Gleixner]

On Thu, 25 Sep 2014, Thierry Reding wrote:

> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> > Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> > argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
> >           We can look up msi_chip pointer by the device pointer
> > or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Right. We have the same thing in the irq_chip callbacks. All of them
take "struct irq_data", because it's already available in the core
code and it gives easy access to all information (chip, chipdata ...)
which is necessary for the callback implementations.

Thanks,

	tglx

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thomas Gleixner]

On Thu, 25 Sep 2014, Thierry Reding wrote:

> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> > Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> > argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
> >           We can look up msi_chip pointer by the device pointer
> > or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Right. We have the same thing in the irq_chip callbacks. All of them
take "struct irq_data", because it's already available in the core
code and it gives easy access to all information (chip, chipdata ...)
which is necessary for the callback implementations.

Thanks,

	tglx

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Thomas Gleixner]

On Thu, 25 Sep 2014, Thierry Reding wrote:

> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
> > Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
> > argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
> >           We can look up msi_chip pointer by the device pointer
> > or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Right. We have the same thing in the irq_chip callbacks. All of them
take "struct irq_data", because it's already available in the core
code and it gives easy access to all information (chip, chipdata ...)
which is necessary for the callback implementations.

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Thu, 25 Sep 2014, Yijing Wang wrote:

> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

This is really backwards. On one hand you try to get rid of the weak
arch functions zoo and then you invent new ones for no good
reason. Why can't x86 store the chip in the pci bus?

Looking deeper, I'm questioning the whole notion of different
msi_chips. Are this really different MSI controllers with a different
feature set or are this defacto multiple instances of the same
controller which just need a different data set?

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Thu, 25 Sep 2014, Yijing Wang wrote:

> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

This is really backwards. On one hand you try to get rid of the weak
arch functions zoo and then you invent new ones for no good
reason. Why can't x86 store the chip in the pci bus?

Looking deeper, I'm questioning the whole notion of different
msi_chips. Are this really different MSI controllers with a different
feature set or are this defacto multiple instances of the same
controller which just need a different data set?

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Thu, 25 Sep 2014, Yijing Wang wrote:

> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

This is really backwards. On one hand you try to get rid of the weak
arch functions zoo and then you invent new ones for no good
reason. Why can't x86 store the chip in the pci bus?

Looking deeper, I'm questioning the whole notion of different
msi_chips. Are this really different MSI controllers with a different
feature set or are this defacto multiple instances of the same
controller which just need a different data set?

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Thu, 25 Sep 2014, Yijing Wang wrote:

> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

This is really backwards. On one hand you try to get rid of the weak
arch functions zoo and then you invent new ones for no good
reason. Why can't x86 store the chip in the pci bus?

Looking deeper, I'm questioning the whole notion of different
msi_chips. Are this really different MSI controllers with a different
feature set or are this defacto multiple instances of the same
controller which just need a different data set?

Thanks,

	tglx

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Thu, 25 Sep 2014, Yijing Wang wrote:

> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

This is really backwards. On one hand you try to get rid of the weak
arch functions zoo and then you invent new ones for no good
reason. Why can't x86 store the chip in the pci bus?

Looking deeper, I'm questioning the whole notion of different
msi_chips. Are this really different MSI controllers with a different
feature set or are this defacto multiple instances of the same
controller which just need a different data set?

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Thu, 25 Sep 2014, Yijing Wang wrote:

> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

This is really backwards. On one hand you try to get rid of the weak
arch functions zoo and then you invent new ones for no good
reason. Why can't x86 store the chip in the pci bus?

Looking deeper, I'm questioning the whole notion of different
msi_chips. Are this really different MSI controllers with a different
feature set or are this defacto multiple instances of the same
controller which just need a different data set?

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Thu, 25 Sep 2014, Yijing Wang wrote:

> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> Currently, MSI chip associates pci bus to msi_chip. Because in
> ARM platform, there may be more than one MSI controller in system.
> Associate pci bus to msi_chip help pci device to find the match
> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> like in x86. we only need one MSI chip, because all device use
> the same MSI address/data and irq etc. So it's no need to associate
> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> to return the MSI chip for simplicity. The default weak
> arch_find_msi_chip() used in ARM platform, find the MSI chip
> by pci bus.

This is really backwards. On one hand you try to get rid of the weak
arch functions zoo and then you invent new ones for no good
reason. Why can't x86 store the chip in the pci bus?

Looking deeper, I'm questioning the whole notion of different
msi_chips. Are this really different MSI controllers with a different
feature set or are this defacto multiple instances of the same
controller which just need a different data set?

Thanks,

	tglx

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Is there a git tree for these patches?
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (22):
>   PCI/MSI: Clean up struct msi_chip argument
>   PCI/MSI: Remove useless bus->msi assignment
>   MSI: Remove the redundant irq_set_chip_data()
>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>  arch/powerpc/kernel/msi.c                |   14 +++-
>  arch/s390/pci/pci.c                      |   18 ++++-
>  arch/sparc/kernel/pci.c                  |   14 +++-
>  arch/tile/kernel/pci_gx.c                |   14 +++-
>  arch/x86/include/asm/apic.h              |    4 +
>  arch/x86/include/asm/pci.h               |    4 +-
>  arch/x86/include/asm/x86_init.h          |    7 --
>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>  arch/x86/kernel/x86_init.c               |   34 ---------
>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>  drivers/iommu/irq_remapping.c            |    9 ++-
>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>  drivers/pci/host/pci-tegra.c             |    8 ++-
>  drivers/pci/host/pcie-designware.c       |    4 +-
>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>  drivers/pci/probe.c                      |    1 -
>  include/linux/msi.h                      |   26 ++-----
>  27 files changed, 266 insertions(+), 202 deletions(-)
> 

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Is there a git tree for these patches?
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (22):
>   PCI/MSI: Clean up struct msi_chip argument
>   PCI/MSI: Remove useless bus->msi assignment
>   MSI: Remove the redundant irq_set_chip_data()
>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>  arch/powerpc/kernel/msi.c                |   14 +++-
>  arch/s390/pci/pci.c                      |   18 ++++-
>  arch/sparc/kernel/pci.c                  |   14 +++-
>  arch/tile/kernel/pci_gx.c                |   14 +++-
>  arch/x86/include/asm/apic.h              |    4 +
>  arch/x86/include/asm/pci.h               |    4 +-
>  arch/x86/include/asm/x86_init.h          |    7 --
>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>  arch/x86/kernel/x86_init.c               |   34 ---------
>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>  drivers/iommu/irq_remapping.c            |    9 ++-
>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>  drivers/pci/host/pci-tegra.c             |    8 ++-
>  drivers/pci/host/pcie-designware.c       |    4 +-
>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>  drivers/pci/probe.c                      |    1 -
>  include/linux/msi.h                      |   26 ++-----
>  27 files changed, 266 insertions(+), 202 deletions(-)
> 

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Is there a git tree for these patches?
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (22):
>   PCI/MSI: Clean up struct msi_chip argument
>   PCI/MSI: Remove useless bus->msi assignment
>   MSI: Remove the redundant irq_set_chip_data()
>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>  arch/powerpc/kernel/msi.c                |   14 +++-
>  arch/s390/pci/pci.c                      |   18 ++++-
>  arch/sparc/kernel/pci.c                  |   14 +++-
>  arch/tile/kernel/pci_gx.c                |   14 +++-
>  arch/x86/include/asm/apic.h              |    4 +
>  arch/x86/include/asm/pci.h               |    4 +-
>  arch/x86/include/asm/x86_init.h          |    7 --
>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>  arch/x86/kernel/x86_init.c               |   34 ---------
>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>  drivers/iommu/irq_remapping.c            |    9 ++-
>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>  drivers/pci/host/pci-tegra.c             |    8 ++-
>  drivers/pci/host/pcie-designware.c       |    4 +-
>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>  drivers/pci/probe.c                      |    1 -
>  include/linux/msi.h                      |   26 ++-----
>  27 files changed, 266 insertions(+), 202 deletions(-)
> 

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Is there a git tree for these patches?
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (22):
>   PCI/MSI: Clean up struct msi_chip argument
>   PCI/MSI: Remove useless bus->msi assignment
>   MSI: Remove the redundant irq_set_chip_data()
>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>  arch/powerpc/kernel/msi.c                |   14 +++-
>  arch/s390/pci/pci.c                      |   18 ++++-
>  arch/sparc/kernel/pci.c                  |   14 +++-
>  arch/tile/kernel/pci_gx.c                |   14 +++-
>  arch/x86/include/asm/apic.h              |    4 +
>  arch/x86/include/asm/pci.h               |    4 +-
>  arch/x86/include/asm/x86_init.h          |    7 --
>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>  arch/x86/kernel/x86_init.c               |   34 ---------
>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>  drivers/iommu/irq_remapping.c            |    9 ++-
>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>  drivers/pci/host/pci-tegra.c             |    8 ++-
>  drivers/pci/host/pcie-designware.c       |    4 +-
>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>  drivers/pci/probe.c                      |    1 -
>  include/linux/msi.h                      |   26 ++-----
>  27 files changed, 266 insertions(+), 202 deletions(-)
> 

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Is there a git tree for these patches?
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (22):
>   PCI/MSI: Clean up struct msi_chip argument
>   PCI/MSI: Remove useless bus->msi assignment
>   MSI: Remove the redundant irq_set_chip_data()
>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>  arch/powerpc/kernel/msi.c                |   14 +++-
>  arch/s390/pci/pci.c                      |   18 ++++-
>  arch/sparc/kernel/pci.c                  |   14 +++-
>  arch/tile/kernel/pci_gx.c                |   14 +++-
>  arch/x86/include/asm/apic.h              |    4 +
>  arch/x86/include/asm/pci.h               |    4 +-
>  arch/x86/include/asm/x86_init.h          |    7 --
>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>  arch/x86/kernel/x86_init.c               |   34 ---------
>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>  drivers/iommu/irq_remapping.c            |    9 ++-
>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>  drivers/pci/host/pci-tegra.c             |    8 ++-
>  drivers/pci/host/pcie-designware.c       |    4 +-
>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>  drivers/pci/probe.c                      |    1 -
>  include/linux/msi.h                      |   26 ++-----
>  27 files changed, 266 insertions(+), 202 deletions(-)
> 

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Is there a git tree for these patches?
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (22):
>   PCI/MSI: Clean up struct msi_chip argument
>   PCI/MSI: Remove useless bus->msi assignment
>   MSI: Remove the redundant irq_set_chip_data()
>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>  arch/powerpc/kernel/msi.c                |   14 +++-
>  arch/s390/pci/pci.c                      |   18 ++++-
>  arch/sparc/kernel/pci.c                  |   14 +++-
>  arch/tile/kernel/pci_gx.c                |   14 +++-
>  arch/x86/include/asm/apic.h              |    4 +
>  arch/x86/include/asm/pci.h               |    4 +-
>  arch/x86/include/asm/x86_init.h          |    7 --
>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>  arch/x86/kernel/x86_init.c               |   34 ---------
>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>  drivers/iommu/irq_remapping.c            |    9 ++-
>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>  drivers/pci/host/pci-tegra.c             |    8 ++-
>  drivers/pci/host/pcie-designware.c       |    4 +-
>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>  drivers/pci/probe.c                      |    1 -
>  include/linux/msi.h                      |   26 ++-----
>  27 files changed, 266 insertions(+), 202 deletions(-)
> 

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> This series is based Bjorn's pci/msi branch
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Is there a git tree for these patches?
> 
> Currently, there are a lot of weak arch functions in MSI code.
> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> This series use MSI chip framework to refactor MSI code across all platforms
> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> unified framework. Because this series changed a lot of ARCH MSI code,
> so tests in the platforms which MSI code modified are warmly welcomed!
> 
> v1->v2:
> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
> 
> RFC->v1: 
> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
> of #ifdef to fix MSI bug in xen running in x86. 
> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
> Drop use struct device as the msi_chip argument, we will do that
> later in another patchset.
> 
> Yijing Wang (22):
>   PCI/MSI: Clean up struct msi_chip argument
>   PCI/MSI: Remove useless bus->msi assignment
>   MSI: Remove the redundant irq_set_chip_data()
>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>   PCI/MSI: Refactor struct msi_chip to make it become more common
>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   x86/MSI: Remove unused MSI weak arch functions
>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>   PCI/MSI: Clean up unused MSI arch functions
> 
>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>  arch/powerpc/kernel/msi.c                |   14 +++-
>  arch/s390/pci/pci.c                      |   18 ++++-
>  arch/sparc/kernel/pci.c                  |   14 +++-
>  arch/tile/kernel/pci_gx.c                |   14 +++-
>  arch/x86/include/asm/apic.h              |    4 +
>  arch/x86/include/asm/pci.h               |    4 +-
>  arch/x86/include/asm/x86_init.h          |    7 --
>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>  arch/x86/kernel/x86_init.c               |   34 ---------
>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>  drivers/iommu/irq_remapping.c            |    9 ++-
>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>  drivers/pci/host/pci-tegra.c             |    8 ++-
>  drivers/pci/host/pcie-designware.c       |    4 +-
>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>  drivers/pci/probe.c                      |    1 -
>  include/linux/msi.h                      |   26 ++-----
>  27 files changed, 266 insertions(+), 202 deletions(-)
> 

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
> Introduced these two funcntions make MSI code complex. And mask/unmask

"These two functions made the MSI code more complex."
> is the irq actions related to interrupt controller, should not use
> weak arch functions to override mask/unmask interfaces. This patch

I am bit baffled of what you are saying.
> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
> bug for simplicity. Also this is preparation for using struct
> msi_chip instead of weak arch MSI functions in all platforms.
> Keep default_msi_mask_irq() and default_msix_mask_irq() in
> linux/msi.h to make s390 MSI code compile happy, they wiil be removed

s/wiil/will.

> in the later patch.
> 
> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't even remember testing it - I guess I did the earlier version.

So a couple of questions since I've totally forgotten about this:

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 50f67a3..5f8f3af 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
>   * reliably as devices without an INTx disable bit will then generate a
>   * level IRQ which will never be cleared.
>   */
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  
> @@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> -{
> -	return default_msi_mask_irq(desc, mask, flag);
> -}
> -
>  static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
> -	desc->masked = arch_msi_mask_irq(desc, mask, flag);
> +	desc->masked = __msi_mask_irq(desc, mask, flag);
>  }
>  
>  /*
> @@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>   * file.  This saves a few milliseconds when initialising devices with lots
>   * of MSI-X interrupts.
>   */
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
> @@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
> -{
> -	return default_msix_mask_irq(desc, flag);
> -}
> -
>  static void msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
> -	desc->masked = arch_msix_mask_irq(desc, flag);
> +	desc->masked = __msix_mask_irq(desc, flag);
>  }
>  
>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI unmasked as initial states */
>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>  	/* Keep cached state to be restored */
> -	arch_msi_mask_irq(desc, mask, ~mask);
> +	__msi_mask_irq(desc, mask, ~mask);

If I am reading this right, it will call the old 'default_msi_mask_irq'
which is exactly what we don't want to do under Xen. We want to call
the NOP code.
>  
>  	/* Restore dev->irq to its default pin-assertion irq */
>  	dev->irq = desc->msi_attrib.default_irq;
> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI-X masked as initial states */
>  	list_for_each_entry(entry, &dev->msi_list, list) {
>  		/* Keep cached states to be restored */
> -		arch_msix_mask_irq(entry, 1);
> +		__msix_mask_irq(entry, 1);

Ditto here.

Looking more at this code I have to retract my Reviewed-by and Tested-by
on the whole series.

Is it possible to get a git tree for this please?

>  	}
>  
>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 45ef8cb..cc46a62 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>  
>  struct msi_desc {
>  	struct {
> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>  
>  void default_teardown_msi_irqs(struct pci_dev *dev);
>  void default_restore_msi_irqs(struct pci_dev *dev);
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
> +#define default_msi_mask_irq	__msi_mask_irq
> +#define default_msix_mask_irq	__msix_mask_irq
>  
>  struct msi_chip {
>  	struct module *owner;
> -- 
> 1.7.1
> 

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
> Introduced these two funcntions make MSI code complex. And mask/unmask

"These two functions made the MSI code more complex."
> is the irq actions related to interrupt controller, should not use
> weak arch functions to override mask/unmask interfaces. This patch

I am bit baffled of what you are saying.
> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
> bug for simplicity. Also this is preparation for using struct
> msi_chip instead of weak arch MSI functions in all platforms.
> Keep default_msi_mask_irq() and default_msix_mask_irq() in
> linux/msi.h to make s390 MSI code compile happy, they wiil be removed

s/wiil/will.

> in the later patch.
> 
> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>

I don't even remember testing it - I guess I did the earlier version.

So a couple of questions since I've totally forgotten about this:

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 50f67a3..5f8f3af 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
>   * reliably as devices without an INTx disable bit will then generate a
>   * level IRQ which will never be cleared.
>   */
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  
> @@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> -{
> -	return default_msi_mask_irq(desc, mask, flag);
> -}
> -
>  static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
> -	desc->masked = arch_msi_mask_irq(desc, mask, flag);
> +	desc->masked = __msi_mask_irq(desc, mask, flag);
>  }
>  
>  /*
> @@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>   * file.  This saves a few milliseconds when initialising devices with lots
>   * of MSI-X interrupts.
>   */
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
> @@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
> -{
> -	return default_msix_mask_irq(desc, flag);
> -}
> -
>  static void msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
> -	desc->masked = arch_msix_mask_irq(desc, flag);
> +	desc->masked = __msix_mask_irq(desc, flag);
>  }
>  
>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI unmasked as initial states */
>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>  	/* Keep cached state to be restored */
> -	arch_msi_mask_irq(desc, mask, ~mask);
> +	__msi_mask_irq(desc, mask, ~mask);

If I am reading this right, it will call the old 'default_msi_mask_irq'
which is exactly what we don't want to do under Xen. We want to call
the NOP code.
>  
>  	/* Restore dev->irq to its default pin-assertion irq */
>  	dev->irq = desc->msi_attrib.default_irq;
> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI-X masked as initial states */
>  	list_for_each_entry(entry, &dev->msi_list, list) {
>  		/* Keep cached states to be restored */
> -		arch_msix_mask_irq(entry, 1);
> +		__msix_mask_irq(entry, 1);

Ditto here.

Looking more at this code I have to retract my Reviewed-by and Tested-by
on the whole series.

Is it possible to get a git tree for this please?

>  	}
>  
>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 45ef8cb..cc46a62 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>  
>  struct msi_desc {
>  	struct {
> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>  
>  void default_teardown_msi_irqs(struct pci_dev *dev);
>  void default_restore_msi_irqs(struct pci_dev *dev);
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
> +#define default_msi_mask_irq	__msi_mask_irq
> +#define default_msix_mask_irq	__msix_mask_irq
>  
>  struct msi_chip {
>  	struct module *owner;
> -- 
> 1.7.1
> 

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
> Introduced these two funcntions make MSI code complex. And mask/unmask

"These two functions made the MSI code more complex."
> is the irq actions related to interrupt controller, should not use
> weak arch functions to override mask/unmask interfaces. This patch

I am bit baffled of what you are saying.
> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
> bug for simplicity. Also this is preparation for using struct
> msi_chip instead of weak arch MSI functions in all platforms.
> Keep default_msi_mask_irq() and default_msix_mask_irq() in
> linux/msi.h to make s390 MSI code compile happy, they wiil be removed

s/wiil/will.

> in the later patch.
> 
> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't even remember testing it - I guess I did the earlier version.

So a couple of questions since I've totally forgotten about this:

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 50f67a3..5f8f3af 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
>   * reliably as devices without an INTx disable bit will then generate a
>   * level IRQ which will never be cleared.
>   */
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  
> @@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> -{
> -	return default_msi_mask_irq(desc, mask, flag);
> -}
> -
>  static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
> -	desc->masked = arch_msi_mask_irq(desc, mask, flag);
> +	desc->masked = __msi_mask_irq(desc, mask, flag);
>  }
>  
>  /*
> @@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>   * file.  This saves a few milliseconds when initialising devices with lots
>   * of MSI-X interrupts.
>   */
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
> @@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
> -{
> -	return default_msix_mask_irq(desc, flag);
> -}
> -
>  static void msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
> -	desc->masked = arch_msix_mask_irq(desc, flag);
> +	desc->masked = __msix_mask_irq(desc, flag);
>  }
>  
>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI unmasked as initial states */
>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>  	/* Keep cached state to be restored */
> -	arch_msi_mask_irq(desc, mask, ~mask);
> +	__msi_mask_irq(desc, mask, ~mask);

If I am reading this right, it will call the old 'default_msi_mask_irq'
which is exactly what we don't want to do under Xen. We want to call
the NOP code.
>  
>  	/* Restore dev->irq to its default pin-assertion irq */
>  	dev->irq = desc->msi_attrib.default_irq;
> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI-X masked as initial states */
>  	list_for_each_entry(entry, &dev->msi_list, list) {
>  		/* Keep cached states to be restored */
> -		arch_msix_mask_irq(entry, 1);
> +		__msix_mask_irq(entry, 1);

Ditto here.

Looking more at this code I have to retract my Reviewed-by and Tested-by
on the whole series.

Is it possible to get a git tree for this please?

>  	}
>  
>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 45ef8cb..cc46a62 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>  
>  struct msi_desc {
>  	struct {
> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>  
>  void default_teardown_msi_irqs(struct pci_dev *dev);
>  void default_restore_msi_irqs(struct pci_dev *dev);
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
> +#define default_msi_mask_irq	__msi_mask_irq
> +#define default_msix_mask_irq	__msix_mask_irq
>  
>  struct msi_chip {
>  	struct module *owner;
> -- 
> 1.7.1
> 

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
> Introduced these two funcntions make MSI code complex. And mask/unmask

"These two functions made the MSI code more complex."
> is the irq actions related to interrupt controller, should not use
> weak arch functions to override mask/unmask interfaces. This patch

I am bit baffled of what you are saying.
> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
> bug for simplicity. Also this is preparation for using struct
> msi_chip instead of weak arch MSI functions in all platforms.
> Keep default_msi_mask_irq() and default_msix_mask_irq() in
> linux/msi.h to make s390 MSI code compile happy, they wiil be removed

s/wiil/will.

> in the later patch.
> 
> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't even remember testing it - I guess I did the earlier version.

So a couple of questions since I've totally forgotten about this:

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 50f67a3..5f8f3af 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
>   * reliably as devices without an INTx disable bit will then generate a
>   * level IRQ which will never be cleared.
>   */
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  
> @@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> -{
> -	return default_msi_mask_irq(desc, mask, flag);
> -}
> -
>  static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
> -	desc->masked = arch_msi_mask_irq(desc, mask, flag);
> +	desc->masked = __msi_mask_irq(desc, mask, flag);
>  }
>  
>  /*
> @@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>   * file.  This saves a few milliseconds when initialising devices with lots
>   * of MSI-X interrupts.
>   */
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
> @@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
> -{
> -	return default_msix_mask_irq(desc, flag);
> -}
> -
>  static void msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
> -	desc->masked = arch_msix_mask_irq(desc, flag);
> +	desc->masked = __msix_mask_irq(desc, flag);
>  }
>  
>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI unmasked as initial states */
>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>  	/* Keep cached state to be restored */
> -	arch_msi_mask_irq(desc, mask, ~mask);
> +	__msi_mask_irq(desc, mask, ~mask);

If I am reading this right, it will call the old 'default_msi_mask_irq'
which is exactly what we don't want to do under Xen. We want to call
the NOP code.
>  
>  	/* Restore dev->irq to its default pin-assertion irq */
>  	dev->irq = desc->msi_attrib.default_irq;
> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI-X masked as initial states */
>  	list_for_each_entry(entry, &dev->msi_list, list) {
>  		/* Keep cached states to be restored */
> -		arch_msix_mask_irq(entry, 1);
> +		__msix_mask_irq(entry, 1);

Ditto here.

Looking more at this code I have to retract my Reviewed-by and Tested-by
on the whole series.

Is it possible to get a git tree for this please?

>  	}
>  
>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 45ef8cb..cc46a62 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>  
>  struct msi_desc {
>  	struct {
> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>  
>  void default_teardown_msi_irqs(struct pci_dev *dev);
>  void default_restore_msi_irqs(struct pci_dev *dev);
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
> +#define default_msi_mask_irq	__msi_mask_irq
> +#define default_msix_mask_irq	__msix_mask_irq
>  
>  struct msi_chip {
>  	struct module *owner;
> -- 
> 1.7.1
> 

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
> Introduced these two funcntions make MSI code complex. And mask/unmask

"These two functions made the MSI code more complex."
> is the irq actions related to interrupt controller, should not use
> weak arch functions to override mask/unmask interfaces. This patch

I am bit baffled of what you are saying.
> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
> bug for simplicity. Also this is preparation for using struct
> msi_chip instead of weak arch MSI functions in all platforms.
> Keep default_msi_mask_irq() and default_msix_mask_irq() in
> linux/msi.h to make s390 MSI code compile happy, they wiil be removed

s/wiil/will.

> in the later patch.
> 
> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't even remember testing it - I guess I did the earlier version.

So a couple of questions since I've totally forgotten about this:

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 50f67a3..5f8f3af 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
>   * reliably as devices without an INTx disable bit will then generate a
>   * level IRQ which will never be cleared.
>   */
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  
> @@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> -{
> -	return default_msi_mask_irq(desc, mask, flag);
> -}
> -
>  static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
> -	desc->masked = arch_msi_mask_irq(desc, mask, flag);
> +	desc->masked = __msi_mask_irq(desc, mask, flag);
>  }
>  
>  /*
> @@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>   * file.  This saves a few milliseconds when initialising devices with lots
>   * of MSI-X interrupts.
>   */
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
> @@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
> -{
> -	return default_msix_mask_irq(desc, flag);
> -}
> -
>  static void msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
> -	desc->masked = arch_msix_mask_irq(desc, flag);
> +	desc->masked = __msix_mask_irq(desc, flag);
>  }
>  
>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI unmasked as initial states */
>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>  	/* Keep cached state to be restored */
> -	arch_msi_mask_irq(desc, mask, ~mask);
> +	__msi_mask_irq(desc, mask, ~mask);

If I am reading this right, it will call the old 'default_msi_mask_irq'
which is exactly what we don't want to do under Xen. We want to call
the NOP code.
>  
>  	/* Restore dev->irq to its default pin-assertion irq */
>  	dev->irq = desc->msi_attrib.default_irq;
> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI-X masked as initial states */
>  	list_for_each_entry(entry, &dev->msi_list, list) {
>  		/* Keep cached states to be restored */
> -		arch_msix_mask_irq(entry, 1);
> +		__msix_mask_irq(entry, 1);

Ditto here.

Looking more at this code I have to retract my Reviewed-by and Tested-by
on the whole series.

Is it possible to get a git tree for this please?

>  	}
>  
>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 45ef8cb..cc46a62 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>  
>  struct msi_desc {
>  	struct {
> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>  
>  void default_teardown_msi_irqs(struct pci_dev *dev);
>  void default_restore_msi_irqs(struct pci_dev *dev);
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
> +#define default_msi_mask_irq	__msi_mask_irq
> +#define default_msix_mask_irq	__msix_mask_irq
>  
>  struct msi_chip {
>  	struct module *owner;
> -- 
> 1.7.1
> 

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
> Introduced these two funcntions make MSI code complex. And mask/unmask

"These two functions made the MSI code more complex."
> is the irq actions related to interrupt controller, should not use
> weak arch functions to override mask/unmask interfaces. This patch

I am bit baffled of what you are saying.
> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
> bug for simplicity. Also this is preparation for using struct
> msi_chip instead of weak arch MSI functions in all platforms.
> Keep default_msi_mask_irq() and default_msix_mask_irq() in
> linux/msi.h to make s390 MSI code compile happy, they wiil be removed

s/wiil/will.

> in the later patch.
> 
> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't even remember testing it - I guess I did the earlier version.

So a couple of questions since I've totally forgotten about this:

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 50f67a3..5f8f3af 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
>   * reliably as devices without an INTx disable bit will then generate a
>   * level IRQ which will never be cleared.
>   */
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  
> @@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> -{
> -	return default_msi_mask_irq(desc, mask, flag);
> -}
> -
>  static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
> -	desc->masked = arch_msi_mask_irq(desc, mask, flag);
> +	desc->masked = __msi_mask_irq(desc, mask, flag);
>  }
>  
>  /*
> @@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>   * file.  This saves a few milliseconds when initialising devices with lots
>   * of MSI-X interrupts.
>   */
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
> @@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
> -{
> -	return default_msix_mask_irq(desc, flag);
> -}
> -
>  static void msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
> -	desc->masked = arch_msix_mask_irq(desc, flag);
> +	desc->masked = __msix_mask_irq(desc, flag);
>  }
>  
>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI unmasked as initial states */
>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>  	/* Keep cached state to be restored */
> -	arch_msi_mask_irq(desc, mask, ~mask);
> +	__msi_mask_irq(desc, mask, ~mask);

If I am reading this right, it will call the old 'default_msi_mask_irq'
which is exactly what we don't want to do under Xen. We want to call
the NOP code.
>  
>  	/* Restore dev->irq to its default pin-assertion irq */
>  	dev->irq = desc->msi_attrib.default_irq;
> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI-X masked as initial states */
>  	list_for_each_entry(entry, &dev->msi_list, list) {
>  		/* Keep cached states to be restored */
> -		arch_msix_mask_irq(entry, 1);
> +		__msix_mask_irq(entry, 1);

Ditto here.

Looking more at this code I have to retract my Reviewed-by and Tested-by
on the whole series.

Is it possible to get a git tree for this please?

>  	}
>  
>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 45ef8cb..cc46a62 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>  
>  struct msi_desc {
>  	struct {
> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>  
>  void default_teardown_msi_irqs(struct pci_dev *dev);
>  void default_restore_msi_irqs(struct pci_dev *dev);
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
> +#define default_msi_mask_irq	__msi_mask_irq
> +#define default_msix_mask_irq	__msix_mask_irq
>  
>  struct msi_chip {
>  	struct module *owner;
> -- 
> 1.7.1
> 

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Konrad Rzeszutek Wilk]

On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
> Introduced these two funcntions make MSI code complex. And mask/unmask

"These two functions made the MSI code more complex."
> is the irq actions related to interrupt controller, should not use
> weak arch functions to override mask/unmask interfaces. This patch

I am bit baffled of what you are saying.
> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
> bug for simplicity. Also this is preparation for using struct
> msi_chip instead of weak arch MSI functions in all platforms.
> Keep default_msi_mask_irq() and default_msix_mask_irq() in
> linux/msi.h to make s390 MSI code compile happy, they wiil be removed

s/wiil/will.

> in the later patch.
> 
> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't even remember testing it - I guess I did the earlier version.

So a couple of questions since I've totally forgotten about this:

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 50f67a3..5f8f3af 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -162,7 +162,7 @@ static inline __attribute_const__ u32 msi_mask(unsigned x)
>   * reliably as devices without an INTx disable bit will then generate a
>   * level IRQ which will never be cleared.
>   */
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  
> @@ -176,14 +176,9 @@ u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
> -{
> -	return default_msi_mask_irq(desc, mask, flag);
> -}
> -
>  static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>  {
> -	desc->masked = arch_msi_mask_irq(desc, mask, flag);
> +	desc->masked = __msi_mask_irq(desc, mask, flag);
>  }
>  
>  /*
> @@ -193,7 +188,7 @@ static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
>   * file.  This saves a few milliseconds when initialising devices with lots
>   * of MSI-X interrupts.
>   */
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
>  	u32 mask_bits = desc->masked;
>  	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
> @@ -206,14 +201,9 @@ u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag)
>  	return mask_bits;
>  }
>  
> -__weak u32 arch_msix_mask_irq(struct msi_desc *desc, u32 flag)
> -{
> -	return default_msix_mask_irq(desc, flag);
> -}
> -
>  static void msix_mask_irq(struct msi_desc *desc, u32 flag)
>  {
> -	desc->masked = arch_msix_mask_irq(desc, flag);
> +	desc->masked = __msix_mask_irq(desc, flag);
>  }
>  
>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI unmasked as initial states */
>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>  	/* Keep cached state to be restored */
> -	arch_msi_mask_irq(desc, mask, ~mask);
> +	__msi_mask_irq(desc, mask, ~mask);

If I am reading this right, it will call the old 'default_msi_mask_irq'
which is exactly what we don't want to do under Xen. We want to call
the NOP code.
>  
>  	/* Restore dev->irq to its default pin-assertion irq */
>  	dev->irq = desc->msi_attrib.default_irq;
> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>  	/* Return the device with MSI-X masked as initial states */
>  	list_for_each_entry(entry, &dev->msi_list, list) {
>  		/* Keep cached states to be restored */
> -		arch_msix_mask_irq(entry, 1);
> +		__msix_mask_irq(entry, 1);

Ditto here.

Looking more at this code I have to retract my Reviewed-by and Tested-by
on the whole series.

Is it possible to get a git tree for this please?

>  	}
>  
>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
> diff --git a/include/linux/msi.h b/include/linux/msi.h
> index 45ef8cb..cc46a62 100644
> --- a/include/linux/msi.h
> +++ b/include/linux/msi.h
> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>  
>  struct msi_desc {
>  	struct {
> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>  
>  void default_teardown_msi_irqs(struct pci_dev *dev);
>  void default_restore_msi_irqs(struct pci_dev *dev);
> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
> +#define default_msi_mask_irq	__msi_mask_irq
> +#define default_msix_mask_irq	__msix_mask_irq
>  
>  struct msi_chip {
>  	struct module *owner;
> -- 
> 1.7.1
> 

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > This series is based Bjorn's pci/msi branch
> > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > 
> > Currently, there are a lot of weak arch functions in MSI code.
> > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > This series use MSI chip framework to refactor MSI code across all platforms
> > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > unified framework. Because this series changed a lot of ARCH MSI code,
> > so tests in the platforms which MSI code modified are warmly welcomed!
> 
> Apart from the comments to the individual patches I very much like where
> this is going. Thanks for taking care of this.
> 
> Thierry

I am actually in disagreement with you, Thierry. I don't like the general direction
of the patches, or at least I don't like the fact that we don't have a portable
way of setting up the msi_chip without having to rely on weak architectural hooks.
I'm surprised no one considers the case of a platform having more than one host
bridge and possibly more than one MSI unit. With the current proposed patchset I
can't see how that would work.

What I would like to see is a way of creating the pci_host_bridge structure outside
the pci_create_root_bus(). That would then allow us to pass this sort of platform
details like associated msi_chip into the host bridge and the child busses will
have an easy way of finding the information needed by finding the root bus and then
the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
everyone and the drivers can remove their kludges that try to work around the
current limitations.

Best regards,
Liviu

---------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 2674 bytes --]

On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > This series is based Bjorn's pci/msi branch
> > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > 
> > > Currently, there are a lot of weak arch functions in MSI code.
> > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > This series use MSI chip framework to refactor MSI code across all platforms
> > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > so tests in the platforms which MSI code modified are warmly welcomed!
> > 
> > Apart from the comments to the individual patches I very much like where
> > this is going. Thanks for taking care of this.
> > 
> > Thierry
> 
> I am actually in disagreement with you, Thierry. I don't like the general direction
> of the patches, or at least I don't like the fact that we don't have a portable
> way of setting up the msi_chip without having to rely on weak architectural hooks.

Oh, good. That's actually one of the things I said I wasn't happy with
either. =)

> I'm surprised no one considers the case of a platform having more than one host
> bridge and possibly more than one MSI unit. With the current proposed patchset I
> can't see how that would work.

The PCI core can already deal with that. An MSI chip can be set per bus
and the weak pcibios_add_bus() can be used to set that. Often it might
not even be necessary to do it via pcibios_add_bus() if you create the
root bus directly, since you can attach the MSI chip at that time.

> What I would like to see is a way of creating the pci_host_bridge structure outside
> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> details like associated msi_chip into the host bridge and the child busses will
> have an easy way of finding the information needed by finding the root bus and then
> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> everyone and the drivers can remove their kludges that try to work around the
> current limitations.

I think both issues are orthogonal. Last time I checked a lot of work
was still necessary to unify host bridges enough so that it could be
shared across architectures. But perhaps some of that work has
happened in the meantime.

But like I said, when you create the root bus, you can easily attach the
MSI chip to it.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 2674 bytes --]

On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > This series is based Bjorn's pci/msi branch
> > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > 
> > > Currently, there are a lot of weak arch functions in MSI code.
> > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > This series use MSI chip framework to refactor MSI code across all platforms
> > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > so tests in the platforms which MSI code modified are warmly welcomed!
> > 
> > Apart from the comments to the individual patches I very much like where
> > this is going. Thanks for taking care of this.
> > 
> > Thierry
> 
> I am actually in disagreement with you, Thierry. I don't like the general direction
> of the patches, or at least I don't like the fact that we don't have a portable
> way of setting up the msi_chip without having to rely on weak architectural hooks.

Oh, good. That's actually one of the things I said I wasn't happy with
either. =)

> I'm surprised no one considers the case of a platform having more than one host
> bridge and possibly more than one MSI unit. With the current proposed patchset I
> can't see how that would work.

The PCI core can already deal with that. An MSI chip can be set per bus
and the weak pcibios_add_bus() can be used to set that. Often it might
not even be necessary to do it via pcibios_add_bus() if you create the
root bus directly, since you can attach the MSI chip at that time.

> What I would like to see is a way of creating the pci_host_bridge structure outside
> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> details like associated msi_chip into the host bridge and the child busses will
> have an easy way of finding the information needed by finding the root bus and then
> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> everyone and the drivers can remove their kludges that try to work around the
> current limitations.

I think both issues are orthogonal. Last time I checked a lot of work
was still necessary to unify host bridges enough so that it could be
shared across architectures. But perhaps some of that work has
happened in the meantime.

But like I said, when you create the root bus, you can easily attach the
MSI chip to it.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 2674 bytes --]

On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > This series is based Bjorn's pci/msi branch
> > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > 
> > > Currently, there are a lot of weak arch functions in MSI code.
> > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > This series use MSI chip framework to refactor MSI code across all platforms
> > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > so tests in the platforms which MSI code modified are warmly welcomed!
> > 
> > Apart from the comments to the individual patches I very much like where
> > this is going. Thanks for taking care of this.
> > 
> > Thierry
> 
> I am actually in disagreement with you, Thierry. I don't like the general direction
> of the patches, or at least I don't like the fact that we don't have a portable
> way of setting up the msi_chip without having to rely on weak architectural hooks.

Oh, good. That's actually one of the things I said I wasn't happy with
either. =)

> I'm surprised no one considers the case of a platform having more than one host
> bridge and possibly more than one MSI unit. With the current proposed patchset I
> can't see how that would work.

The PCI core can already deal with that. An MSI chip can be set per bus
and the weak pcibios_add_bus() can be used to set that. Often it might
not even be necessary to do it via pcibios_add_bus() if you create the
root bus directly, since you can attach the MSI chip at that time.

> What I would like to see is a way of creating the pci_host_bridge structure outside
> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> details like associated msi_chip into the host bridge and the child busses will
> have an easy way of finding the information needed by finding the root bus and then
> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> everyone and the drivers can remove their kludges that try to work around the
> current limitations.

I think both issues are orthogonal. Last time I checked a lot of work
was still necessary to unify host bridges enough so that it could be
shared across architectures. But perhaps some of that work has
happened in the meantime.

But like I said, when you create the root bus, you can easily attach the
MSI chip to it.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 2674 bytes --]

On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > This series is based Bjorn's pci/msi branch
> > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > 
> > > Currently, there are a lot of weak arch functions in MSI code.
> > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > This series use MSI chip framework to refactor MSI code across all platforms
> > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > so tests in the platforms which MSI code modified are warmly welcomed!
> > 
> > Apart from the comments to the individual patches I very much like where
> > this is going. Thanks for taking care of this.
> > 
> > Thierry
> 
> I am actually in disagreement with you, Thierry. I don't like the general direction
> of the patches, or at least I don't like the fact that we don't have a portable
> way of setting up the msi_chip without having to rely on weak architectural hooks.

Oh, good. That's actually one of the things I said I wasn't happy with
either. =)

> I'm surprised no one considers the case of a platform having more than one host
> bridge and possibly more than one MSI unit. With the current proposed patchset I
> can't see how that would work.

The PCI core can already deal with that. An MSI chip can be set per bus
and the weak pcibios_add_bus() can be used to set that. Often it might
not even be necessary to do it via pcibios_add_bus() if you create the
root bus directly, since you can attach the MSI chip at that time.

> What I would like to see is a way of creating the pci_host_bridge structure outside
> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> details like associated msi_chip into the host bridge and the child busses will
> have an easy way of finding the information needed by finding the root bus and then
> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> everyone and the drivers can remove their kludges that try to work around the
> current limitations.

I think both issues are orthogonal. Last time I checked a lot of work
was still necessary to unify host bridges enough so that it could be
shared across architectures. But perhaps some of that work has
happened in the meantime.

But like I said, when you create the root bus, you can easily attach the
MSI chip to it.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > This series is based Bjorn's pci/msi branch
> > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > 
> > > Currently, there are a lot of weak arch functions in MSI code.
> > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > This series use MSI chip framework to refactor MSI code across all platforms
> > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > so tests in the platforms which MSI code modified are warmly welcomed!
> > 
> > Apart from the comments to the individual patches I very much like where
> > this is going. Thanks for taking care of this.
> > 
> > Thierry
> 
> I am actually in disagreement with you, Thierry. I don't like the general direction
> of the patches, or at least I don't like the fact that we don't have a portable
> way of setting up the msi_chip without having to rely on weak architectural hooks.

Oh, good. That's actually one of the things I said I wasn't happy with
either. =)

> I'm surprised no one considers the case of a platform having more than one host
> bridge and possibly more than one MSI unit. With the current proposed patchset I
> can't see how that would work.

The PCI core can already deal with that. An MSI chip can be set per bus
and the weak pcibios_add_bus() can be used to set that. Often it might
not even be necessary to do it via pcibios_add_bus() if you create the
root bus directly, since you can attach the MSI chip at that time.

> What I would like to see is a way of creating the pci_host_bridge structure outside
> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> details like associated msi_chip into the host bridge and the child busses will
> have an easy way of finding the information needed by finding the root bus and then
> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> everyone and the drivers can remove their kludges that try to work around the
> current limitations.

I think both issues are orthogonal. Last time I checked a lot of work
was still necessary to unify host bridges enough so that it could be
shared across architectures. But perhaps some of that work has
happened in the meantime.

But like I said, when you create the root bus, you can easily attach the
MSI chip to it.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140925/6a446ea2/attachment.sig>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 2674 bytes --]

On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > This series is based Bjorn's pci/msi branch
> > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > 
> > > Currently, there are a lot of weak arch functions in MSI code.
> > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > This series use MSI chip framework to refactor MSI code across all platforms
> > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > so tests in the platforms which MSI code modified are warmly welcomed!
> > 
> > Apart from the comments to the individual patches I very much like where
> > this is going. Thanks for taking care of this.
> > 
> > Thierry
> 
> I am actually in disagreement with you, Thierry. I don't like the general direction
> of the patches, or at least I don't like the fact that we don't have a portable
> way of setting up the msi_chip without having to rely on weak architectural hooks.

Oh, good. That's actually one of the things I said I wasn't happy with
either. =)

> I'm surprised no one considers the case of a platform having more than one host
> bridge and possibly more than one MSI unit. With the current proposed patchset I
> can't see how that would work.

The PCI core can already deal with that. An MSI chip can be set per bus
and the weak pcibios_add_bus() can be used to set that. Often it might
not even be necessary to do it via pcibios_add_bus() if you create the
root bus directly, since you can attach the MSI chip at that time.

> What I would like to see is a way of creating the pci_host_bridge structure outside
> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> details like associated msi_chip into the host bridge and the child busses will
> have an easy way of finding the information needed by finding the root bus and then
> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> everyone and the drivers can remove their kludges that try to work around the
> current limitations.

I think both issues are orthogonal. Last time I checked a lot of work
was still necessary to unify host bridges enough so that it could be
shared across architectures. But perhaps some of that work has
happened in the meantime.

But like I said, when you create the root bus, you can easily attach the
MSI chip to it.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 2674 bytes --]

On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > This series is based Bjorn's pci/msi branch
> > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > 
> > > Currently, there are a lot of weak arch functions in MSI code.
> > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > This series use MSI chip framework to refactor MSI code across all platforms
> > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > so tests in the platforms which MSI code modified are warmly welcomed!
> > 
> > Apart from the comments to the individual patches I very much like where
> > this is going. Thanks for taking care of this.
> > 
> > Thierry
> 
> I am actually in disagreement with you, Thierry. I don't like the general direction
> of the patches, or at least I don't like the fact that we don't have a portable
> way of setting up the msi_chip without having to rely on weak architectural hooks.

Oh, good. That's actually one of the things I said I wasn't happy with
either. =)

> I'm surprised no one considers the case of a platform having more than one host
> bridge and possibly more than one MSI unit. With the current proposed patchset I
> can't see how that would work.

The PCI core can already deal with that. An MSI chip can be set per bus
and the weak pcibios_add_bus() can be used to set that. Often it might
not even be necessary to do it via pcibios_add_bus() if you create the
root bus directly, since you can attach the MSI chip at that time.

> What I would like to see is a way of creating the pci_host_bridge structure outside
> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> details like associated msi_chip into the host bridge and the child busses will
> have an easy way of finding the information needed by finding the root bus and then
> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> everyone and the drivers can remove their kludges that try to work around the
> current limitations.

I think both issues are orthogonal. Last time I checked a lot of work
was still necessary to unify host bridges enough so that it could be
shared across architectures. But perhaps some of that work has
happened in the meantime.

But like I said, when you create the root bus, you can easily attach the
MSI chip to it.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 06:49:38PM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> > On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > > This series is based Bjorn's pci/msi branch
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > > 
> > > > Currently, there are a lot of weak arch functions in MSI code.
> > > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > > This series use MSI chip framework to refactor MSI code across all platforms
> > > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > > so tests in the platforms which MSI code modified are warmly welcomed!
> > > 
> > > Apart from the comments to the individual patches I very much like where
> > > this is going. Thanks for taking care of this.
> > > 
> > > Thierry
> > 
> > I am actually in disagreement with you, Thierry. I don't like the general direction
> > of the patches, or at least I don't like the fact that we don't have a portable
> > way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)
> 
> > I'm surprised no one considers the case of a platform having more than one host
> > bridge and possibly more than one MSI unit. With the current proposed patchset I
> > can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

But I'm thinking that we need to move away from pcibios_add_bus() interface to do
something that should be generic. You don't need to be called for every bus when all
you want is just the root bus in order to add the MSI chip. Also, from looking at
the current patchset, a lot of architectures would set the MSI chip to a global
variable, which means you don't have an option to choose the MSI chip based on the
bus.

> 
> > What I would like to see is a way of creating the pci_host_bridge structure outside
> > the pci_create_root_bus(). That would then allow us to pass this sort of platform
> > details like associated msi_chip into the host bridge and the child busses will
> > have an easy way of finding the information needed by finding the root bus and then
> > the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> > everyone and the drivers can remove their kludges that try to work around the
> > current limitations.
> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.

Breaking out the host bridge creation from root bus creation is not difficult, just not
agree upon. That would be the first step in making the generic host brige structure
useful for sharing, specially if used as a sort of "parent" structure that you can
wrap with your actual host bridge structure.

> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.

Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
and add their own needed modifications. Which makes it hard to fix bugs and prevents code
reuse.

Best regards,
Liviu

> 
> Thierry



-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 06:49:38PM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> > On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > > This series is based Bjorn's pci/msi branch
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > > 
> > > > Currently, there are a lot of weak arch functions in MSI code.
> > > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > > This series use MSI chip framework to refactor MSI code across all platforms
> > > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > > so tests in the platforms which MSI code modified are warmly welcomed!
> > > 
> > > Apart from the comments to the individual patches I very much like where
> > > this is going. Thanks for taking care of this.
> > > 
> > > Thierry
> > 
> > I am actually in disagreement with you, Thierry. I don't like the general direction
> > of the patches, or at least I don't like the fact that we don't have a portable
> > way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)
> 
> > I'm surprised no one considers the case of a platform having more than one host
> > bridge and possibly more than one MSI unit. With the current proposed patchset I
> > can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

But I'm thinking that we need to move away from pcibios_add_bus() interface to do
something that should be generic. You don't need to be called for every bus when all
you want is just the root bus in order to add the MSI chip. Also, from looking at
the current patchset, a lot of architectures would set the MSI chip to a global
variable, which means you don't have an option to choose the MSI chip based on the
bus.

> 
> > What I would like to see is a way of creating the pci_host_bridge structure outside
> > the pci_create_root_bus(). That would then allow us to pass this sort of platform
> > details like associated msi_chip into the host bridge and the child busses will
> > have an easy way of finding the information needed by finding the root bus and then
> > the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> > everyone and the drivers can remove their kludges that try to work around the
> > current limitations.
> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.

Breaking out the host bridge creation from root bus creation is not difficult, just not
agree upon. That would be the first step in making the generic host brige structure
useful for sharing, specially if used as a sort of "parent" structure that you can
wrap with your actual host bridge structure.

> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.

Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
and add their own needed modifications. Which makes it hard to fix bugs and prevents code
reuse.

Best regards,
Liviu

> 
> Thierry



-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 06:49:38PM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> > On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > > This series is based Bjorn's pci/msi branch
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > > 
> > > > Currently, there are a lot of weak arch functions in MSI code.
> > > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > > This series use MSI chip framework to refactor MSI code across all platforms
> > > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > > so tests in the platforms which MSI code modified are warmly welcomed!
> > > 
> > > Apart from the comments to the individual patches I very much like where
> > > this is going. Thanks for taking care of this.
> > > 
> > > Thierry
> > 
> > I am actually in disagreement with you, Thierry. I don't like the general direction
> > of the patches, or at least I don't like the fact that we don't have a portable
> > way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)
> 
> > I'm surprised no one considers the case of a platform having more than one host
> > bridge and possibly more than one MSI unit. With the current proposed patchset I
> > can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

But I'm thinking that we need to move away from pcibios_add_bus() interface to do
something that should be generic. You don't need to be called for every bus when all
you want is just the root bus in order to add the MSI chip. Also, from looking at
the current patchset, a lot of architectures would set the MSI chip to a global
variable, which means you don't have an option to choose the MSI chip based on the
bus.

> 
> > What I would like to see is a way of creating the pci_host_bridge structure outside
> > the pci_create_root_bus(). That would then allow us to pass this sort of platform
> > details like associated msi_chip into the host bridge and the child busses will
> > have an easy way of finding the information needed by finding the root bus and then
> > the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> > everyone and the drivers can remove their kludges that try to work around the
> > current limitations.
> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.

Breaking out the host bridge creation from root bus creation is not difficult, just not
agree upon. That would be the first step in making the generic host brige structure
useful for sharing, specially if used as a sort of "parent" structure that you can
wrap with your actual host bridge structure.

> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.

Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
and add their own needed modifications. Which makes it hard to fix bugs and prevents code
reuse.

Best regards,
Liviu

> 
> Thierry



-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 06:49:38PM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> > On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > > This series is based Bjorn's pci/msi branch
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > > 
> > > > Currently, there are a lot of weak arch functions in MSI code.
> > > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > > This series use MSI chip framework to refactor MSI code across all platforms
> > > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > > so tests in the platforms which MSI code modified are warmly welcomed!
> > > 
> > > Apart from the comments to the individual patches I very much like where
> > > this is going. Thanks for taking care of this.
> > > 
> > > Thierry
> > 
> > I am actually in disagreement with you, Thierry. I don't like the general direction
> > of the patches, or at least I don't like the fact that we don't have a portable
> > way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)
> 
> > I'm surprised no one considers the case of a platform having more than one host
> > bridge and possibly more than one MSI unit. With the current proposed patchset I
> > can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

But I'm thinking that we need to move away from pcibios_add_bus() interface to do
something that should be generic. You don't need to be called for every bus when all
you want is just the root bus in order to add the MSI chip. Also, from looking at
the current patchset, a lot of architectures would set the MSI chip to a global
variable, which means you don't have an option to choose the MSI chip based on the
bus.

> 
> > What I would like to see is a way of creating the pci_host_bridge structure outside
> > the pci_create_root_bus(). That would then allow us to pass this sort of platform
> > details like associated msi_chip into the host bridge and the child busses will
> > have an easy way of finding the information needed by finding the root bus and then
> > the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> > everyone and the drivers can remove their kludges that try to work around the
> > current limitations.
> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.

Breaking out the host bridge creation from root bus creation is not difficult, just not
agree upon. That would be the first step in making the generic host brige structure
useful for sharing, specially if used as a sort of "parent" structure that you can
wrap with your actual host bridge structure.

> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.

Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
and add their own needed modifications. Which makes it hard to fix bugs and prevents code
reuse.

Best regards,
Liviu

> 
> Thierry



-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 06:49:38PM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> > On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > > This series is based Bjorn's pci/msi branch
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > > 
> > > > Currently, there are a lot of weak arch functions in MSI code.
> > > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > > This series use MSI chip framework to refactor MSI code across all platforms
> > > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > > so tests in the platforms which MSI code modified are warmly welcomed!
> > > 
> > > Apart from the comments to the individual patches I very much like where
> > > this is going. Thanks for taking care of this.
> > > 
> > > Thierry
> > 
> > I am actually in disagreement with you, Thierry. I don't like the general direction
> > of the patches, or at least I don't like the fact that we don't have a portable
> > way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)
> 
> > I'm surprised no one considers the case of a platform having more than one host
> > bridge and possibly more than one MSI unit. With the current proposed patchset I
> > can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

But I'm thinking that we need to move away from pcibios_add_bus() interface to do
something that should be generic. You don't need to be called for every bus when all
you want is just the root bus in order to add the MSI chip. Also, from looking at
the current patchset, a lot of architectures would set the MSI chip to a global
variable, which means you don't have an option to choose the MSI chip based on the
bus.

> 
> > What I would like to see is a way of creating the pci_host_bridge structure outside
> > the pci_create_root_bus(). That would then allow us to pass this sort of platform
> > details like associated msi_chip into the host bridge and the child busses will
> > have an easy way of finding the information needed by finding the root bus and then
> > the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> > everyone and the drivers can remove their kludges that try to work around the
> > current limitations.
> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.

Breaking out the host bridge creation from root bus creation is not difficult, just not
agree upon. That would be the first step in making the generic host brige structure
useful for sharing, specially if used as a sort of "parent" structure that you can
wrap with your actual host bridge structure.

> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.

Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
and add their own needed modifications. Which makes it hard to fix bugs and prevents code
reuse.

Best regards,
Liviu

> 
> Thierry



-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 06:49:38PM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> > On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > > This series is based Bjorn's pci/msi branch
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > > 
> > > > Currently, there are a lot of weak arch functions in MSI code.
> > > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > > This series use MSI chip framework to refactor MSI code across all platforms
> > > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > > so tests in the platforms which MSI code modified are warmly welcomed!
> > > 
> > > Apart from the comments to the individual patches I very much like where
> > > this is going. Thanks for taking care of this.
> > > 
> > > Thierry
> > 
> > I am actually in disagreement with you, Thierry. I don't like the general direction
> > of the patches, or at least I don't like the fact that we don't have a portable
> > way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)
> 
> > I'm surprised no one considers the case of a platform having more than one host
> > bridge and possibly more than one MSI unit. With the current proposed patchset I
> > can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

But I'm thinking that we need to move away from pcibios_add_bus() interface to do
something that should be generic. You don't need to be called for every bus when all
you want is just the root bus in order to add the MSI chip. Also, from looking at
the current patchset, a lot of architectures would set the MSI chip to a global
variable, which means you don't have an option to choose the MSI chip based on the
bus.

> 
> > What I would like to see is a way of creating the pci_host_bridge structure outside
> > the pci_create_root_bus(). That would then allow us to pass this sort of platform
> > details like associated msi_chip into the host bridge and the child busses will
> > have an easy way of finding the information needed by finding the root bus and then
> > the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> > everyone and the drivers can remove their kludges that try to work around the
> > current limitations.
> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.

Breaking out the host bridge creation from root bus creation is not difficult, just not
agree upon. That would be the first step in making the generic host brige structure
useful for sharing, specially if used as a sort of "parent" structure that you can
wrap with your actual host bridge structure.

> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.

Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
and add their own needed modifications. Which makes it hard to fix bugs and prevents code
reuse.

Best regards,
Liviu

> 
> Thierry



-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Thu, Sep 25, 2014 at 06:49:38PM +0200, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 03:48:55PM +0100, Liviu Dudau wrote:
> > On Thu, Sep 25, 2014 at 09:42:36AM +0200, Thierry Reding wrote:
> > > On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
> > > > This series is based Bjorn's pci/msi branch
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> > > > 
> > > > Currently, there are a lot of weak arch functions in MSI code.
> > > > Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
> > > > This series use MSI chip framework to refactor MSI code across all platforms
> > > > to eliminate weak arch functions. Then all MSI irqs will be managed in a 
> > > > unified framework. Because this series changed a lot of ARCH MSI code,
> > > > so tests in the platforms which MSI code modified are warmly welcomed!
> > > 
> > > Apart from the comments to the individual patches I very much like where
> > > this is going. Thanks for taking care of this.
> > > 
> > > Thierry
> > 
> > I am actually in disagreement with you, Thierry. I don't like the general direction
> > of the patches, or at least I don't like the fact that we don't have a portable
> > way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)
> 
> > I'm surprised no one considers the case of a platform having more than one host
> > bridge and possibly more than one MSI unit. With the current proposed patchset I
> > can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

But I'm thinking that we need to move away from pcibios_add_bus() interface to do
something that should be generic. You don't need to be called for every bus when all
you want is just the root bus in order to add the MSI chip. Also, from looking at
the current patchset, a lot of architectures would set the MSI chip to a global
variable, which means you don't have an option to choose the MSI chip based on the
bus.

> 
> > What I would like to see is a way of creating the pci_host_bridge structure outside
> > the pci_create_root_bus(). That would then allow us to pass this sort of platform
> > details like associated msi_chip into the host bridge and the child busses will
> > have an easy way of finding the information needed by finding the root bus and then
> > the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> > everyone and the drivers can remove their kludges that try to work around the
> > current limitations.
> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.

Breaking out the host bridge creation from root bus creation is not difficult, just not
agree upon. That would be the first step in making the generic host brige structure
useful for sharing, specially if used as a sort of "parent" structure that you can
wrap with your actual host bridge structure.

> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.

Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
and add their own needed modifications. Which makes it hard to fix bugs and prevents code
reuse.

Best regards,
Liviu

> 
> Thierry



-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 02/22] PCI/MSI: Remove useless bus->msi assignment

[Yijing Wang]

On 2014/9/25 15:06, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:12AM +0800, Yijing Wang wrote:
>> Currently, PCI drivers will initialize bus->msi in
>> pcibios_add_bus(). pcibios_add_bus() will be called
>> in every pci bus initialization. So the bus->msi
>> assignment in pci_alloc_child_bus() is useless.
> 
> I think this should be the other way around. The default should be to
> inherit bus->msi from the parent. That way drivers don't typically have
> to do it, yet they can still opt to override it if they need to.
> 
> For Tegra for example I think it would work if we assigned the MSI chip
> to the root bus (in tegra_pcie_scan_bus()) and then have it propagated
> to child busses in pci_alloc_child_bus() so that tegra_pcie_add_bus()
> can be removed altogether.

Hi Thierry, thanks very much for your review and comments!

Because pcibios_add_bus() and "child->msi = parent->msi;" in pci_alloc_child_bus()
do the same thing. So I think we should use one and remove another. I like
the latter.

In addition, I consider several solutions to associate msi chip and PCI device.

1. Add a msi_chip member in PCI arch sysdata to store the msi_chip pointer. Because
all PCI devices under a PCI hostbridge always share the same msi chip, so every PCI device
can find the msi chip by pci_bus->sysdata, but in this solution, we also need to add
ARCH specific functions to extract msi chip from PCI arch sysdata, like pci_domain_nr().
Then we can remove .add_bus() like tegra_pcie_add_bus() and the msi assignment in  pci_alloc_child_bus().

2. Remove .add_bus() functions, associate PCI root bus and msi chip after PCI root bus created,
as you mentioned above. In this solution we need to associate PCI root bus and msi chip in all PCI
hostbridge drivers, like in tegra_pcie_scan_bus().


3. Introduce a global msi chip list, currently, only in arm, there maybe more than one type MSI chip,
but in arm, we can find msi chip by PCI hostbridge platform device's of_node, Eg. use "msi-parent" property
to find it. Or msi chip is integrated into PCI hostbridge, we can find msi chip by compare msi_chip->dev and
PCI hostbridge's platform device's struct device *dev pointer. And because PCI hostbridge platform device pass
to pci_create_root_bus() as the parent device, so every PCI devices can first find the platform device, then
to find the msi chip, this solution looks a bit ugly, but we only associate pci hostbridge and msi chip, PCI child
buses and devices do not have to know the msi chip details.

4. Last, in this series, introduced weak arch function arch_find_msi_chip(), it's the simplest one, because all platforms
except arm, only one msi chip will exist in system.

What do you think about this ?

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 15:15, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>> argument.
> 
> That's not true. Out of the four drivers that you modify two use the
> parameter. And the two that don't probably should be using it too.
> 
> 50% is not "rarely". =)
> 
>>           We can look up msi_chip pointer by the device pointer
>> or irq number, so clean up msi_chip argument.
> 
> I don't like this particular change. The idea was to keep the API object
> oriented so that drivers wouldn't have to know where to get the MSI chip
> from. It also makes it more resilient against code reorganizations since
> the core code is the only place that needs to know where to get the chip
> from.

Hm, ok, Thomas also don't like this change, I will drop this one, thanks.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Yijing Wang]

On 2014/9/25 15:19, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
>> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
>> use irq chip_data to save the msi_chip pointer. They
>> already call irq_set_chip_data() in their own MSI irq map
>> functions. So irq_set_chip_data() in arch_setup_msi_irq()
>> is useless.
> 
> Again, I think this should be the other way around. If drivers do
> something that's already handled by the core, then the duplicate code
> should be dropped from the drivers.

Hi Thierry, this is different thing, because chip_data is specific to IRQ
controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
So we can not call irq_set_chip_data() in core code.

x86 irq piece code

int arch_setup_hwirq(unsigned int irq, int node)
{
	struct irq_cfg *cfg;
	unsigned long flags;
	int ret;

	cfg = alloc_irq_cfg(irq, node);
	if (!cfg)
		return -ENOMEM;

	raw_spin_lock_irqsave(&vector_lock, flags);
	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
	raw_spin_unlock_irqrestore(&vector_lock, flags);

	if (!ret)
		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
	else
		free_irq_cfg(irq, cfg);
	return ret;
}

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 15:26, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:16AM +0800, Yijing Wang wrote:
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> Can't x86 simply set the bus' .msi field anyway? It would seem to be
> easy to do and unifies the code rather than driving it further apart
> using even more of the __weak functions.

As mentioned in the first reply, I will rework this one when we find a better solution.

Thanks!
Yijing.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 12/22] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:34, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:22AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
> [...]
>> @@ -132,12 +132,12 @@ msi_irq_allocated:
>>  	/* Make sure the search for available interrupts didn't fail */
>>  	if (irq >= 64) {
>>  		if (request_private_bits) {
>> -			pr_err("arch_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>> +			pr_err("octeon_setup_msi_irq: Unable to find %d free interrupts, trying just one",
>>  			       1 << request_private_bits);
> 
> Perhaps while at it make this (and other similar changes in this patch):
> 
> 	pr_err("%s(): Unable to ...", __func__, ...);

Will update it, thanks!

> 
> So that it becomes more resilient against this kind of rename?
> 
>>  			request_private_bits = 0;
>>  			goto try_only_one;
>>  		} else
>> -			panic("arch_setup_msi_irq: Unable to find a free MSI interrupt");
>> +			panic("octeon_setup_msi_irq: Unable to find a free MSI interrupt");
> 
>> @@ -210,14 +210,13 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>  
>>  	return 0;
>>  }
>> -
> 
> This...

OK

> 
>> @@ -240,7 +239,7 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	 */
>>  	number_irqs = 0;
>>  	while ((irq0 + number_irqs < 64) &&
>> -	       (msi_multiple_irq_bitmask[index]
>> +		(msi_multiple_irq_bitmask[index]
> 
> ... and this seem like unrelated whitespace changes.

OK

> 
>>  		& (1ull << (irq0 + number_irqs))))
>>  		number_irqs++;
>>  	number_irqs++;
>> @@ -249,8 +248,8 @@ void arch_teardown_msi_irq(unsigned int irq)
>>  	/* Shift the mask to the correct bit location */
>>  	bitmask <<= irq0;
>>  	if ((msi_free_irq_bitmask[index] & bitmask) != bitmask)
>> -		panic("arch_teardown_msi_irq: Attempted to teardown MSI "
>> -		      "interrupt (%d) not in use", irq);
>> +		panic("octeon_teardown_msi_irq: Attempted to teardown MSI "
>> +			"interrupt (%d) not in use", irq);
> 
> And the second line here also needlessly changes the indentation.

OK
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 14/22] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:36, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:24AM +0800, Yijing Wang wrote:
>> Use MSI chip framework instead of arch MSI functions to configure
>> MSI/MSI-X irq. So we can manage MSI/MSI-X irq in a unified framework.
> 
> Nit: s/irq/IRQ/ in the above.
> 
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> ---
>>  arch/mips/pci/msi-xlp.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
>> index e469dc7..6b791ef 100644
>> --- a/arch/mips/pci/msi-xlp.c
>> +++ b/arch/mips/pci/msi-xlp.c
>> @@ -245,7 +245,7 @@ static struct irq_chip xlp_msix_chip = {
>>  	.irq_unmask	= unmask_msi_irq,
>>  };
>>  
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlp_teardown_msi_irq(unsigned int irq)
> 
> Should this not be static now as well?

Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 15/22] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:37, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:25AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
> [...]
>> @@ -214,11 +214,11 @@ static int get_irq_vector(const struct pci_dev *dev)
>>  }
>>  
>>  #ifdef CONFIG_PCI_MSI
>> -void arch_teardown_msi_irq(unsigned int irq)
>> +void xlr_teardown_msi_irq(unsigned int irq)
>>  {
>>  }
>>  
>> -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>> +int xlr_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
> 
> Can both of these now be static?
Yes, Will update.

> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

[PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

Re: [PATCH v2 17/22] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq

[Yijing Wang]

On 2014/9/25 15:38, Thierry Reding wrote:
> On Thu, Sep 25, 2014 at 11:14:27AM +0800, Yijing Wang wrote:
> [...]
>> diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
> [...]
>> @@ -358,7 +358,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
>>  	}
>>  }
>>  
>> -int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>> +int zpci_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
> 
> static?

Yes, Will update.

> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 01/22] PCI/MSI: Clean up struct msi_chip argument

[Yijing Wang]

On 2014/9/25 18:20, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Thierry Reding wrote:
> 
>> On Thu, Sep 25, 2014 at 11:14:11AM +0800, Yijing Wang wrote:
>>> Msi_chip functions setup_irq/teardown_irq rarely use msi_chip
>>> argument.
>>
>> That's not true. Out of the four drivers that you modify two use the
>> parameter. And the two that don't probably should be using it too.
>>
>> 50% is not "rarely". =)
>>
>>>           We can look up msi_chip pointer by the device pointer
>>> or irq number, so clean up msi_chip argument.
>>
>> I don't like this particular change. The idea was to keep the API object
>> oriented so that drivers wouldn't have to know where to get the MSI chip
>> from. It also makes it more resilient against code reorganizations since
>> the core code is the only place that needs to know where to get the chip
>> from.
> 
> Right. We have the same thing in the irq_chip callbacks. All of them
> take "struct irq_data", because it's already available in the core
> code and it gives easy access to all information (chip, chipdata ...)
> which is necessary for the callback implementations.

OK, I will drop this change, tglx, thanks for your review and comments!

Thanks!
Yijing.


> 
> Thanks,
> 
> 	tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m=141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m=141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m=141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m\x141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m=141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m=141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m=141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?

Hi Thomas, I introduced this weak function , because I thought all platforms
except arm always have only one msi chip, and I hoped to provide a simplest
solution, less code changes. I consider several solutions to associate msi chip
and PCI device. In my reply to Thierry in first reply,
http://marc.info/?l=linux-pci&m\x141169658208255&w=2
Could you give me some advices ?

Thanks!
Yijing.


> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?
> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

On 2014/9/25 18:38, Thomas Gleixner wrote:
> On Thu, 25 Sep 2014, Yijing Wang wrote:
> 
>> Introduce weak arch_find_msi_chip() to find the match msi_chip.
>> Currently, MSI chip associates pci bus to msi_chip. Because in
>> ARM platform, there may be more than one MSI controller in system.
>> Associate pci bus to msi_chip help pci device to find the match
>> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
>> like in x86. we only need one MSI chip, because all device use
>> the same MSI address/data and irq etc. So it's no need to associate
>> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
>> to return the MSI chip for simplicity. The default weak
>> arch_find_msi_chip() used in ARM platform, find the MSI chip
>> by pci bus.
> 
> This is really backwards. On one hand you try to get rid of the weak
> arch functions zoo and then you invent new ones for no good
> reason. Why can't x86 store the chip in the pci bus?
> 
> Looking deeper, I'm questioning the whole notion of different
> msi_chips. Are this really different MSI controllers with a different
> feature set or are this defacto multiple instances of the same
> controller which just need a different data set?

MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
It's difficult to extract the common data and code.

I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
mask_msi_irq(), etc... I want to extract the common data set for that, so we can
remove lots of unnecessary MSI code.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/25 22:23, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:10AM +0800, Yijing Wang wrote:
>> This series is based Bjorn's pci/msi branch
>> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi
> 
> Is there a git tree for these patches?

Hi Konrad, my git tree in company can not be pulled from outside.
I will try to update this series to github these days.


>>
>> Currently, there are a lot of weak arch functions in MSI code.
>> Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
>> This series use MSI chip framework to refactor MSI code across all platforms
>> to eliminate weak arch functions. Then all MSI irqs will be managed in a 
>> unified framework. Because this series changed a lot of ARCH MSI code,
>> so tests in the platforms which MSI code modified are warmly welcomed!
>>
>> v1->v2:
>> Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
>> and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.
>>
>> RFC->v1: 
>> Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
>> of #ifdef to fix MSI bug in xen running in x86. 
>> Rename arch_get_match_msi_chip() to arch_find_msi_chip().
>> Drop use struct device as the msi_chip argument, we will do that
>> later in another patchset.
>>
>> Yijing Wang (22):
>>   PCI/MSI: Clean up struct msi_chip argument
>>   PCI/MSI: Remove useless bus->msi assignment
>>   MSI: Remove the redundant irq_set_chip_data()
>>   x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
>>   s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
>>   PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
>>   PCI/MSI: Refactor struct msi_chip to make it become more common
>>   x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   x86/MSI: Remove unused MSI weak arch functions
>>   MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
>>   MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
>>   PCI/MSI: Clean up unused MSI arch functions
>>
>>  arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
>>  arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
>>  arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
>>  arch/arm/mach-iop13xx/msi.c              |    9 ++-
>>  arch/arm/mach-iop13xx/pci.c              |    6 ++
>>  arch/ia64/kernel/msi_ia64.c              |   18 ++++-
>>  arch/mips/pci/msi-octeon.c               |   35 ++++++----
>>  arch/mips/pci/msi-xlp.c                  |   18 ++++--
>>  arch/mips/pci/pci-xlr.c                  |   15 ++++-
>>  arch/powerpc/kernel/msi.c                |   14 +++-
>>  arch/s390/pci/pci.c                      |   18 ++++-
>>  arch/sparc/kernel/pci.c                  |   14 +++-
>>  arch/tile/kernel/pci_gx.c                |   14 +++-
>>  arch/x86/include/asm/apic.h              |    4 +
>>  arch/x86/include/asm/pci.h               |    4 +-
>>  arch/x86/include/asm/x86_init.h          |    7 --
>>  arch/x86/kernel/apic/io_apic.c           |   16 ++++-
>>  arch/x86/kernel/x86_init.c               |   34 ---------
>>  arch/x86/pci/xen.c                       |   60 +++++++++-------
>>  drivers/iommu/irq_remapping.c            |    9 ++-
>>  drivers/irqchip/irq-armada-370-xp.c      |    8 +--
>>  drivers/pci/host/pci-tegra.c             |    8 ++-
>>  drivers/pci/host/pcie-designware.c       |    4 +-
>>  drivers/pci/host/pcie-rcar.c             |    8 ++-
>>  drivers/pci/msi.c                        |  114 ++++++++++++++----------------
>>  drivers/pci/probe.c                      |    1 -
>>  include/linux/msi.h                      |   26 ++-----
>>  27 files changed, 266 insertions(+), 202 deletions(-)
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 04/22] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()

[Yijing Wang]

On 2014/9/25 22:33, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 25, 2014 at 11:14:14AM +0800, Yijing Wang wrote:
>> Commit 0e4ccb150 added two __weak arch functions arch_msix_mask_irq()
>> and arch_msi_mask_irq() to fix a bug found when running xen in x86.
>> Introduced these two funcntions make MSI code complex. And mask/unmask
> 
> "These two functions made the MSI code more complex."

OK, will update, thanks.

>> is the irq actions related to interrupt controller, should not use
>> weak arch functions to override mask/unmask interfaces. This patch
> 
> I am bit baffled of what you are saying.

Sorry for my poor English. The meaning is that I think override irq_chip
mask/unmask irq is better than introduced weak functions.

>> reverted commit 0e4ccb150 and export struct irq_chip msi_chip, modify
>> msi_chip->irq_mask/irq_unmask() in xen init functions to fix this
>> bug for simplicity. Also this is preparation for using struct
>> msi_chip instead of weak arch MSI functions in all platforms.
>> Keep default_msi_mask_irq() and default_msix_mask_irq() in
>> linux/msi.h to make s390 MSI code compile happy, they wiil be removed
> 
> s/wiil/will.

Will update, thanks.

> 
>> in the later patch.
>>
>> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> 
> I don't even remember testing it - I guess I did the earlier version.

Yes, I added your tested-by because in last version, you help to test the whole series in xen.
And I didn't change something in xen part patches in this new version.

> 
> So a couple of questions since I've totally forgotten about this:
> 
>> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
>> index 50f67a3..5f8f3af 100644
>> --- a/drivers/pci/msi.c
>> +++ b/drivers/pci/msi.c
...
>>  static void msi_set_mask_bit(struct irq_data *data, u32 flag)
>> @@ -852,7 +842,7 @@ void pci_msi_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI unmasked as initial states */
>>  	mask = msi_mask(desc->msi_attrib.multi_cap);
>>  	/* Keep cached state to be restored */
>> -	arch_msi_mask_irq(desc, mask, ~mask);
>> +	__msi_mask_irq(desc, mask, ~mask);
> 
> If I am reading this right, it will call the old 'default_msi_mask_irq'
> which is exactly what we don't want to do under Xen. We want to call
> the NOP code.

Good catch. I missed this one, it will also be called in xen.
I need to rework this patch.

>>  
>>  	/* Restore dev->irq to its default pin-assertion irq */
>>  	dev->irq = desc->msi_attrib.default_irq;
>> @@ -950,7 +940,7 @@ void pci_msix_shutdown(struct pci_dev *dev)
>>  	/* Return the device with MSI-X masked as initial states */
>>  	list_for_each_entry(entry, &dev->msi_list, list) {
>>  		/* Keep cached states to be restored */
>> -		arch_msix_mask_irq(entry, 1);
>> +		__msix_mask_irq(entry, 1);
> 
> Ditto here.
> 
> Looking more at this code I have to retract my Reviewed-by and Tested-by
> on the whole series.

OK, because this patch still need some enhancement.

> 
> Is it possible to get a git tree for this please?

I will provide a git tree as soon as possible.

Thanks!
Yijing.

> 
>>  	}
>>  
>>  	msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0);
>> diff --git a/include/linux/msi.h b/include/linux/msi.h
>> index 45ef8cb..cc46a62 100644
>> --- a/include/linux/msi.h
>> +++ b/include/linux/msi.h
>> @@ -19,6 +19,8 @@ void read_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void get_cached_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void __write_msi_msg(struct msi_desc *entry, struct msi_msg *msg);
>>  void write_msi_msg(unsigned int irq, struct msi_msg *msg);
>> +u32 __msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +u32 __msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>>  
>>  struct msi_desc {
>>  	struct {
>> @@ -59,8 +61,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
>>  
>>  void default_teardown_msi_irqs(struct pci_dev *dev);
>>  void default_restore_msi_irqs(struct pci_dev *dev);
>> -u32 default_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag);
>> -u32 default_msix_mask_irq(struct msi_desc *desc, u32 flag);
>> +#define default_msi_mask_irq	__msi_mask_irq
>> +#define default_msix_mask_irq	__msix_mask_irq
>>  
>>  struct msi_chip {
>>  	struct module *owner;
>> -- 
>> 1.7.1
>>
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> I am actually in disagreement with you, Thierry. I don't like the general direction
>> of the patches, or at least I don't like the fact that we don't have a portable
>> way of setting up the msi_chip without having to rely on weak architectural hooks.
> 
> Oh, good. That's actually one of the things I said I wasn't happy with
> either. =)

Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
Let's find a better solution :)

> 
>> I'm surprised no one considers the case of a platform having more than one host
>> bridge and possibly more than one MSI unit. With the current proposed patchset I
>> can't see how that would work.
> 
> The PCI core can already deal with that. An MSI chip can be set per bus
> and the weak pcibios_add_bus() can be used to set that. Often it might
> not even be necessary to do it via pcibios_add_bus() if you create the
> root bus directly, since you can attach the MSI chip at that time.

Yes, PCI hostbridge driver find the matched msi chip during its initialization,
and assign the msi chip to PCI bus in pcibios_add_bus().

> 
>> What I would like to see is a way of creating the pci_host_bridge structure outside
>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>> details like associated msi_chip into the host bridge and the child busses will
>> have an easy way of finding the information needed by finding the root bus and then
>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>> everyone and the drivers can remove their kludges that try to work around the
>> current limitations.

So I think maybe save msi chip in PCI arch sysdata is a good candidate.

> 
> I think both issues are orthogonal. Last time I checked a lot of work
> was still necessary to unify host bridges enough so that it could be
> shared across architectures. But perhaps some of that work has
> happened in the meantime.
> 
> But like I said, when you create the root bus, you can easily attach the
> MSI chip to it.
> 
> Thierry
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>> The PCI core can already deal with that. An MSI chip can be set per bus
>> and the weak pcibios_add_bus() can be used to set that. Often it might
>> not even be necessary to do it via pcibios_add_bus() if you create the
>> root bus directly, since you can attach the MSI chip at that time.
> 
> But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> something that should be generic. You don't need to be called for every bus when all
> you want is just the root bus in order to add the MSI chip. Also, from looking at
> the current patchset, a lot of architectures would set the MSI chip to a global
> variable, which means you don't have an option to choose the MSI chip based on the
> bus.

I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
and PCI bus.

In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
PCI root bus and its child buses.

> 
>>
>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>> details like associated msi_chip into the host bridge and the child busses will
>>> have an easy way of finding the information needed by finding the root bus and then
>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>> everyone and the drivers can remove their kludges that try to work around the
>>> current limitations.
>>
>> I think both issues are orthogonal. Last time I checked a lot of work
>> was still necessary to unify host bridges enough so that it could be
>> shared across architectures. But perhaps some of that work has
>> happened in the meantime.
> 
> Breaking out the host bridge creation from root bus creation is not difficult, just not
> agree upon. That would be the first step in making the generic host brige structure
> useful for sharing, specially if used as a sort of "parent" structure that you can
> wrap with your actual host bridge structure.

Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
do it in another series. And if we save msi chip in pci sysdata now, it will be easy to
move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

Thanks!
Yijing.

> 
>>
>> But like I said, when you create the root bus, you can easily attach the
>> MSI chip to it.
> 
> Not if you want to use the generic pci_scan_root_bus() function. One needs to copy the code
> and add their own needed modifications. Which makes it hard to fix bugs and prevents code
> reuse.
> 
> Best regards,
> Liviu
> 
>>
>> Thierry
> 
> 
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1480 bytes --]

On Fri, Sep 26, 2014 at 10:04:45AM +0800, Yijing Wang wrote:
> On 2014/9/25 15:19, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> >> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> >> use irq chip_data to save the msi_chip pointer. They
> >> already call irq_set_chip_data() in their own MSI irq map
> >> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> >> is useless.
> > 
> > Again, I think this should be the other way around. If drivers do
> > something that's already handled by the core, then the duplicate code
> > should be dropped from the drivers.
> 
> Hi Thierry, this is different thing, because chip_data is specific to IRQ
> controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
> So we can not call irq_set_chip_data() in core code.
> 
> x86 irq piece code
> 
> int arch_setup_hwirq(unsigned int irq, int node)
> {
> 	struct irq_cfg *cfg;
> 	unsigned long flags;
> 	int ret;
> 
> 	cfg = alloc_irq_cfg(irq, node);
> 	if (!cfg)
> 		return -ENOMEM;
> 
> 	raw_spin_lock_irqsave(&vector_lock, flags);
> 	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
> 	raw_spin_unlock_irqrestore(&vector_lock, flags);
> 
> 	if (!ret)
> 		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
> 	else
> 		free_irq_cfg(irq, cfg);
> 	return ret;
> }

Okay, makes sense to keep irq_set_chip_data() for driver-specific data
then.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 1480 bytes --]

On Fri, Sep 26, 2014 at 10:04:45AM +0800, Yijing Wang wrote:
> On 2014/9/25 15:19, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> >> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> >> use irq chip_data to save the msi_chip pointer. They
> >> already call irq_set_chip_data() in their own MSI irq map
> >> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> >> is useless.
> > 
> > Again, I think this should be the other way around. If drivers do
> > something that's already handled by the core, then the duplicate code
> > should be dropped from the drivers.
> 
> Hi Thierry, this is different thing, because chip_data is specific to IRQ
> controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
> So we can not call irq_set_chip_data() in core code.
> 
> x86 irq piece code
> 
> int arch_setup_hwirq(unsigned int irq, int node)
> {
> 	struct irq_cfg *cfg;
> 	unsigned long flags;
> 	int ret;
> 
> 	cfg = alloc_irq_cfg(irq, node);
> 	if (!cfg)
> 		return -ENOMEM;
> 
> 	raw_spin_lock_irqsave(&vector_lock, flags);
> 	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
> 	raw_spin_unlock_irqrestore(&vector_lock, flags);
> 
> 	if (!ret)
> 		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
> 	else
> 		free_irq_cfg(irq, cfg);
> 	return ret;
> }

Okay, makes sense to keep irq_set_chip_data() for driver-specific data
then.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1480 bytes --]

On Fri, Sep 26, 2014 at 10:04:45AM +0800, Yijing Wang wrote:
> On 2014/9/25 15:19, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> >> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> >> use irq chip_data to save the msi_chip pointer. They
> >> already call irq_set_chip_data() in their own MSI irq map
> >> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> >> is useless.
> > 
> > Again, I think this should be the other way around. If drivers do
> > something that's already handled by the core, then the duplicate code
> > should be dropped from the drivers.
> 
> Hi Thierry, this is different thing, because chip_data is specific to IRQ
> controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
> So we can not call irq_set_chip_data() in core code.
> 
> x86 irq piece code
> 
> int arch_setup_hwirq(unsigned int irq, int node)
> {
> 	struct irq_cfg *cfg;
> 	unsigned long flags;
> 	int ret;
> 
> 	cfg = alloc_irq_cfg(irq, node);
> 	if (!cfg)
> 		return -ENOMEM;
> 
> 	raw_spin_lock_irqsave(&vector_lock, flags);
> 	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
> 	raw_spin_unlock_irqrestore(&vector_lock, flags);
> 
> 	if (!ret)
> 		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
> 	else
> 		free_irq_cfg(irq, cfg);
> 	return ret;
> }

Okay, makes sense to keep irq_set_chip_data() for driver-specific data
then.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1480 bytes --]

On Fri, Sep 26, 2014 at 10:04:45AM +0800, Yijing Wang wrote:
> On 2014/9/25 15:19, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> >> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> >> use irq chip_data to save the msi_chip pointer. They
> >> already call irq_set_chip_data() in their own MSI irq map
> >> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> >> is useless.
> > 
> > Again, I think this should be the other way around. If drivers do
> > something that's already handled by the core, then the duplicate code
> > should be dropped from the drivers.
> 
> Hi Thierry, this is different thing, because chip_data is specific to IRQ
> controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
> So we can not call irq_set_chip_data() in core code.
> 
> x86 irq piece code
> 
> int arch_setup_hwirq(unsigned int irq, int node)
> {
> 	struct irq_cfg *cfg;
> 	unsigned long flags;
> 	int ret;
> 
> 	cfg = alloc_irq_cfg(irq, node);
> 	if (!cfg)
> 		return -ENOMEM;
> 
> 	raw_spin_lock_irqsave(&vector_lock, flags);
> 	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
> 	raw_spin_unlock_irqrestore(&vector_lock, flags);
> 
> 	if (!ret)
> 		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
> 	else
> 		free_irq_cfg(irq, cfg);
> 	return ret;
> }

Okay, makes sense to keep irq_set_chip_data() for driver-specific data
then.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

On Fri, Sep 26, 2014 at 10:04:45AM +0800, Yijing Wang wrote:
> On 2014/9/25 15:19, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> >> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> >> use irq chip_data to save the msi_chip pointer. They
> >> already call irq_set_chip_data() in their own MSI irq map
> >> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> >> is useless.
> > 
> > Again, I think this should be the other way around. If drivers do
> > something that's already handled by the core, then the duplicate code
> > should be dropped from the drivers.
> 
> Hi Thierry, this is different thing, because chip_data is specific to IRQ
> controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
> So we can not call irq_set_chip_data() in core code.
> 
> x86 irq piece code
> 
> int arch_setup_hwirq(unsigned int irq, int node)
> {
> 	struct irq_cfg *cfg;
> 	unsigned long flags;
> 	int ret;
> 
> 	cfg = alloc_irq_cfg(irq, node);
> 	if (!cfg)
> 		return -ENOMEM;
> 
> 	raw_spin_lock_irqsave(&vector_lock, flags);
> 	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
> 	raw_spin_unlock_irqrestore(&vector_lock, flags);
> 
> 	if (!ret)
> 		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
> 	else
> 		free_irq_cfg(irq, cfg);
> 	return ret;
> }

Okay, makes sense to keep irq_set_chip_data() for driver-specific data
then.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140926/6c7d2b86/attachment.sig>

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 1480 bytes --]

On Fri, Sep 26, 2014 at 10:04:45AM +0800, Yijing Wang wrote:
> On 2014/9/25 15:19, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> >> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> >> use irq chip_data to save the msi_chip pointer. They
> >> already call irq_set_chip_data() in their own MSI irq map
> >> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> >> is useless.
> > 
> > Again, I think this should be the other way around. If drivers do
> > something that's already handled by the core, then the duplicate code
> > should be dropped from the drivers.
> 
> Hi Thierry, this is different thing, because chip_data is specific to IRQ
> controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
> So we can not call irq_set_chip_data() in core code.
> 
> x86 irq piece code
> 
> int arch_setup_hwirq(unsigned int irq, int node)
> {
> 	struct irq_cfg *cfg;
> 	unsigned long flags;
> 	int ret;
> 
> 	cfg = alloc_irq_cfg(irq, node);
> 	if (!cfg)
> 		return -ENOMEM;
> 
> 	raw_spin_lock_irqsave(&vector_lock, flags);
> 	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
> 	raw_spin_unlock_irqrestore(&vector_lock, flags);
> 
> 	if (!ret)
> 		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
> 	else
> 		free_irq_cfg(irq, cfg);
> 	return ret;
> }

Okay, makes sense to keep irq_set_chip_data() for driver-specific data
then.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1480 bytes --]

On Fri, Sep 26, 2014 at 10:04:45AM +0800, Yijing Wang wrote:
> On 2014/9/25 15:19, Thierry Reding wrote:
> > On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> >> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> >> use irq chip_data to save the msi_chip pointer. They
> >> already call irq_set_chip_data() in their own MSI irq map
> >> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> >> is useless.
> > 
> > Again, I think this should be the other way around. If drivers do
> > something that's already handled by the core, then the duplicate code
> > should be dropped from the drivers.
> 
> Hi Thierry, this is different thing, because chip_data is specific to IRQ
> controller, and in other platform, like in x86, chip_data is used to save irq_cfg.
> So we can not call irq_set_chip_data() in core code.
> 
> x86 irq piece code
> 
> int arch_setup_hwirq(unsigned int irq, int node)
> {
> 	struct irq_cfg *cfg;
> 	unsigned long flags;
> 	int ret;
> 
> 	cfg = alloc_irq_cfg(irq, node);
> 	if (!cfg)
> 		return -ENOMEM;
> 
> 	raw_spin_lock_irqsave(&vector_lock, flags);
> 	ret = __assign_irq_vector(irq, cfg, apic->target_cpus());
> 	raw_spin_unlock_irqrestore(&vector_lock, flags);
> 
> 	if (!ret)
> 		irq_set_chip_data(irq, cfg);  ------------->Save irq_cfg
> 	else
> 		free_irq_cfg(irq, cfg);
> 	return ret;
> }

Okay, makes sense to keep irq_set_chip_data() for driver-specific data
then.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  drivers/pci/msi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>

> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 51d7e62..50f67a3 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>  	if (err < 0)
>  		return err;
>  
> -	irq_set_chip_data(desc->irq, chip);
> -
>  	return 0;
>  }
>  
>  void __weak arch_teardown_msi_irq(unsigned int irq)
>  {
> -	struct msi_chip *chip = irq_get_chip_data(irq);
> +	struct msi_desc *entry = irq_get_msi_desc(irq);
> +	struct msi_chip *chip = entry->dev->bus->msi;
>  
>  	if (!chip || !chip->teardown_irq)
>  		return;
> -- 
> 1.7.1
> 

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 1232 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.
> 
> Signed-off-by: Yijing Wang <wangyijing-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/pci/msi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 51d7e62..50f67a3 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>  	if (err < 0)
>  		return err;
>  
> -	irq_set_chip_data(desc->irq, chip);
> -
>  	return 0;
>  }
>  
>  void __weak arch_teardown_msi_irq(unsigned int irq)
>  {
> -	struct msi_chip *chip = irq_get_chip_data(irq);
> +	struct msi_desc *entry = irq_get_msi_desc(irq);
> +	struct msi_chip *chip = entry->dev->bus->msi;
>  
>  	if (!chip || !chip->teardown_irq)
>  		return;
> -- 
> 1.7.1
> 

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  drivers/pci/msi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>

> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 51d7e62..50f67a3 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>  	if (err < 0)
>  		return err;
>  
> -	irq_set_chip_data(desc->irq, chip);
> -
>  	return 0;
>  }
>  
>  void __weak arch_teardown_msi_irq(unsigned int irq)
>  {
> -	struct msi_chip *chip = irq_get_chip_data(irq);
> +	struct msi_desc *entry = irq_get_msi_desc(irq);
> +	struct msi_chip *chip = entry->dev->bus->msi;
>  
>  	if (!chip || !chip->teardown_irq)
>  		return;
> -- 
> 1.7.1
> 

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  drivers/pci/msi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>

> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 51d7e62..50f67a3 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>  	if (err < 0)
>  		return err;
>  
> -	irq_set_chip_data(desc->irq, chip);
> -
>  	return 0;
>  }
>  
>  void __weak arch_teardown_msi_irq(unsigned int irq)
>  {
> -	struct msi_chip *chip = irq_get_chip_data(irq);
> +	struct msi_desc *entry = irq_get_msi_desc(irq);
> +	struct msi_chip *chip = entry->dev->bus->msi;
>  
>  	if (!chip || !chip->teardown_irq)
>  		return;
> -- 
> 1.7.1
> 

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  drivers/pci/msi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>

> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 51d7e62..50f67a3 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>  	if (err < 0)
>  		return err;
>  
> -	irq_set_chip_data(desc->irq, chip);
> -
>  	return 0;
>  }
>  
>  void __weak arch_teardown_msi_irq(unsigned int irq)
>  {
> -	struct msi_chip *chip = irq_get_chip_data(irq);
> +	struct msi_desc *entry = irq_get_msi_desc(irq);
> +	struct msi_chip *chip = entry->dev->bus->msi;
>  
>  	if (!chip || !chip->teardown_irq)
>  		return;
> -- 
> 1.7.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140926/3837e85c/attachment.sig>

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 1174 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  drivers/pci/msi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>

> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 51d7e62..50f67a3 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>  	if (err < 0)
>  		return err;
>  
> -	irq_set_chip_data(desc->irq, chip);
> -
>  	return 0;
>  }
>  
>  void __weak arch_teardown_msi_irq(unsigned int irq)
>  {
> -	struct msi_chip *chip = irq_get_chip_data(irq);
> +	struct msi_desc *entry = irq_get_msi_desc(irq);
> +	struct msi_chip *chip = entry->dev->bus->msi;
>  
>  	if (!chip || !chip->teardown_irq)
>  		return;
> -- 
> 1.7.1
> 

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 03/22] MSI: Remove the redundant irq_set_chip_data()

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

On Thu, Sep 25, 2014 at 11:14:13AM +0800, Yijing Wang wrote:
> Currently, pcie-designware, pcie-rcar, pci-tegra drivers
> use irq chip_data to save the msi_chip pointer. They
> already call irq_set_chip_data() in their own MSI irq map
> functions. So irq_set_chip_data() in arch_setup_msi_irq()
> is useless.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> ---
>  drivers/pci/msi.c |    5 ++---
>  1 files changed, 2 insertions(+), 3 deletions(-)

Reviewed-by: Thierry Reding <treding@nvidia.com>

> 
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 51d7e62..50f67a3 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -41,14 +41,13 @@ int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
>  	if (err < 0)
>  		return err;
>  
> -	irq_set_chip_data(desc->irq, chip);
> -
>  	return 0;
>  }
>  
>  void __weak arch_teardown_msi_irq(unsigned int irq)
>  {
> -	struct msi_chip *chip = irq_get_chip_data(irq);
> +	struct msi_desc *entry = irq_get_msi_desc(irq);
> +	struct msi_chip *chip = entry->dev->bus->msi;
>  
>  	if (!chip || !chip->teardown_irq)
>  		return;
> -- 
> 1.7.1
> 

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Fri, Sep 26, 2014 at 11:42:23AM +0800, Yijing Wang wrote:
> >> I am actually in disagreement with you, Thierry. I don't like the general direction
> >> of the patches, or at least I don't like the fact that we don't have a portable
> >> way of setting up the msi_chip without having to rely on weak architectural hooks.
> > 
> > Oh, good. That's actually one of the things I said I wasn't happy with
> > either. =)
> 
> Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
> Let's find a better solution :)
> 
> > 
> >> I'm surprised no one considers the case of a platform having more than one host
> >> bridge and possibly more than one MSI unit. With the current proposed patchset I
> >> can't see how that would work.
> > 
> > The PCI core can already deal with that. An MSI chip can be set per bus
> > and the weak pcibios_add_bus() can be used to set that. Often it might
> > not even be necessary to do it via pcibios_add_bus() if you create the
> > root bus directly, since you can attach the MSI chip at that time.
> 
> Yes, PCI hostbridge driver find the matched msi chip during its initialization,
> and assign the msi chip to PCI bus in pcibios_add_bus().
> 
> > 
> >> What I would like to see is a way of creating the pci_host_bridge structure outside
> >> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >> details like associated msi_chip into the host bridge and the child busses will
> >> have an easy way of finding the information needed by finding the root bus and then
> >> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >> everyone and the drivers can remove their kludges that try to work around the
> >> current limitations.
> 
> So I think maybe save msi chip in PCI arch sysdata is a good candidate.

Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
sysdata around the pci_host_bridge*.

Best regards,
Liviu

> 
> > 
> > I think both issues are orthogonal. Last time I checked a lot of work
> > was still necessary to unify host bridges enough so that it could be
> > shared across architectures. But perhaps some of that work has
> > happened in the meantime.
> > 
> > But like I said, when you create the root bus, you can easily attach the
> > MSI chip to it.
> > 
> > Thierry
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Fri, Sep 26, 2014 at 11:42:23AM +0800, Yijing Wang wrote:
> >> I am actually in disagreement with you, Thierry. I don't like the general direction
> >> of the patches, or at least I don't like the fact that we don't have a portable
> >> way of setting up the msi_chip without having to rely on weak architectural hooks.
> > 
> > Oh, good. That's actually one of the things I said I wasn't happy with
> > either. =)
> 
> Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
> Let's find a better solution :)
> 
> > 
> >> I'm surprised no one considers the case of a platform having more than one host
> >> bridge and possibly more than one MSI unit. With the current proposed patchset I
> >> can't see how that would work.
> > 
> > The PCI core can already deal with that. An MSI chip can be set per bus
> > and the weak pcibios_add_bus() can be used to set that. Often it might
> > not even be necessary to do it via pcibios_add_bus() if you create the
> > root bus directly, since you can attach the MSI chip at that time.
> 
> Yes, PCI hostbridge driver find the matched msi chip during its initialization,
> and assign the msi chip to PCI bus in pcibios_add_bus().
> 
> > 
> >> What I would like to see is a way of creating the pci_host_bridge structure outside
> >> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >> details like associated msi_chip into the host bridge and the child busses will
> >> have an easy way of finding the information needed by finding the root bus and then
> >> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >> everyone and the drivers can remove their kludges that try to work around the
> >> current limitations.
> 
> So I think maybe save msi chip in PCI arch sysdata is a good candidate.

Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
sysdata around the pci_host_bridge*.

Best regards,
Liviu

> 
> > 
> > I think both issues are orthogonal. Last time I checked a lot of work
> > was still necessary to unify host bridges enough so that it could be
> > shared across architectures. But perhaps some of that work has
> > happened in the meantime.
> > 
> > But like I said, when you create the root bus, you can easily attach the
> > MSI chip to it.
> > 
> > Thierry
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Fri, Sep 26, 2014 at 11:42:23AM +0800, Yijing Wang wrote:
> >> I am actually in disagreement with you, Thierry. I don't like the general direction
> >> of the patches, or at least I don't like the fact that we don't have a portable
> >> way of setting up the msi_chip without having to rely on weak architectural hooks.
> > 
> > Oh, good. That's actually one of the things I said I wasn't happy with
> > either. =)
> 
> Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
> Let's find a better solution :)
> 
> > 
> >> I'm surprised no one considers the case of a platform having more than one host
> >> bridge and possibly more than one MSI unit. With the current proposed patchset I
> >> can't see how that would work.
> > 
> > The PCI core can already deal with that. An MSI chip can be set per bus
> > and the weak pcibios_add_bus() can be used to set that. Often it might
> > not even be necessary to do it via pcibios_add_bus() if you create the
> > root bus directly, since you can attach the MSI chip at that time.
> 
> Yes, PCI hostbridge driver find the matched msi chip during its initialization,
> and assign the msi chip to PCI bus in pcibios_add_bus().
> 
> > 
> >> What I would like to see is a way of creating the pci_host_bridge structure outside
> >> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >> details like associated msi_chip into the host bridge and the child busses will
> >> have an easy way of finding the information needed by finding the root bus and then
> >> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >> everyone and the drivers can remove their kludges that try to work around the
> >> current limitations.
> 
> So I think maybe save msi chip in PCI arch sysdata is a good candidate.

Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
sysdata around the pci_host_bridge*.

Best regards,
Liviu

> 
> > 
> > I think both issues are orthogonal. Last time I checked a lot of work
> > was still necessary to unify host bridges enough so that it could be
> > shared across architectures. But perhaps some of that work has
> > happened in the meantime.
> > 
> > But like I said, when you create the root bus, you can easily attach the
> > MSI chip to it.
> > 
> > Thierry
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Fri, Sep 26, 2014 at 11:42:23AM +0800, Yijing Wang wrote:
> >> I am actually in disagreement with you, Thierry. I don't like the general direction
> >> of the patches, or at least I don't like the fact that we don't have a portable
> >> way of setting up the msi_chip without having to rely on weak architectural hooks.
> > 
> > Oh, good. That's actually one of the things I said I wasn't happy with
> > either. =)
> 
> Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
> Let's find a better solution :)
> 
> > 
> >> I'm surprised no one considers the case of a platform having more than one host
> >> bridge and possibly more than one MSI unit. With the current proposed patchset I
> >> can't see how that would work.
> > 
> > The PCI core can already deal with that. An MSI chip can be set per bus
> > and the weak pcibios_add_bus() can be used to set that. Often it might
> > not even be necessary to do it via pcibios_add_bus() if you create the
> > root bus directly, since you can attach the MSI chip at that time.
> 
> Yes, PCI hostbridge driver find the matched msi chip during its initialization,
> and assign the msi chip to PCI bus in pcibios_add_bus().
> 
> > 
> >> What I would like to see is a way of creating the pci_host_bridge structure outside
> >> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >> details like associated msi_chip into the host bridge and the child busses will
> >> have an easy way of finding the information needed by finding the root bus and then
> >> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >> everyone and the drivers can remove their kludges that try to work around the
> >> current limitations.
> 
> So I think maybe save msi chip in PCI arch sysdata is a good candidate.

Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
sysdata around the pci_host_bridge*.

Best regards,
Liviu

> 
> > 
> > I think both issues are orthogonal. Last time I checked a lot of work
> > was still necessary to unify host bridges enough so that it could be
> > shared across architectures. But perhaps some of that work has
> > happened in the meantime.
> > 
> > But like I said, when you create the root bus, you can easily attach the
> > MSI chip to it.
> > 
> > Thierry
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Fri, Sep 26, 2014 at 11:42:23AM +0800, Yijing Wang wrote:
> >> I am actually in disagreement with you, Thierry. I don't like the general direction
> >> of the patches, or at least I don't like the fact that we don't have a portable
> >> way of setting up the msi_chip without having to rely on weak architectural hooks.
> > 
> > Oh, good. That's actually one of the things I said I wasn't happy with
> > either. =)
> 
> Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
> Let's find a better solution :)
> 
> > 
> >> I'm surprised no one considers the case of a platform having more than one host
> >> bridge and possibly more than one MSI unit. With the current proposed patchset I
> >> can't see how that would work.
> > 
> > The PCI core can already deal with that. An MSI chip can be set per bus
> > and the weak pcibios_add_bus() can be used to set that. Often it might
> > not even be necessary to do it via pcibios_add_bus() if you create the
> > root bus directly, since you can attach the MSI chip at that time.
> 
> Yes, PCI hostbridge driver find the matched msi chip during its initialization,
> and assign the msi chip to PCI bus in pcibios_add_bus().
> 
> > 
> >> What I would like to see is a way of creating the pci_host_bridge structure outside
> >> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >> details like associated msi_chip into the host bridge and the child busses will
> >> have an easy way of finding the information needed by finding the root bus and then
> >> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >> everyone and the drivers can remove their kludges that try to work around the
> >> current limitations.
> 
> So I think maybe save msi chip in PCI arch sysdata is a good candidate.

Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
sysdata around the pci_host_bridge*.

Best regards,
Liviu

> 
> > 
> > I think both issues are orthogonal. Last time I checked a lot of work
> > was still necessary to unify host bridges enough so that it could be
> > shared across architectures. But perhaps some of that work has
> > happened in the meantime.
> > 
> > But like I said, when you create the root bus, you can easily attach the
> > MSI chip to it.
> > 
> > Thierry
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Fri, Sep 26, 2014 at 11:42:23AM +0800, Yijing Wang wrote:
> >> I am actually in disagreement with you, Thierry. I don't like the general direction
> >> of the patches, or at least I don't like the fact that we don't have a portable
> >> way of setting up the msi_chip without having to rely on weak architectural hooks.
> > 
> > Oh, good. That's actually one of the things I said I wasn't happy with
> > either. =)
> 
> Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
> Let's find a better solution :)
> 
> > 
> >> I'm surprised no one considers the case of a platform having more than one host
> >> bridge and possibly more than one MSI unit. With the current proposed patchset I
> >> can't see how that would work.
> > 
> > The PCI core can already deal with that. An MSI chip can be set per bus
> > and the weak pcibios_add_bus() can be used to set that. Often it might
> > not even be necessary to do it via pcibios_add_bus() if you create the
> > root bus directly, since you can attach the MSI chip at that time.
> 
> Yes, PCI hostbridge driver find the matched msi chip during its initialization,
> and assign the msi chip to PCI bus in pcibios_add_bus().
> 
> > 
> >> What I would like to see is a way of creating the pci_host_bridge structure outside
> >> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >> details like associated msi_chip into the host bridge and the child busses will
> >> have an easy way of finding the information needed by finding the root bus and then
> >> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >> everyone and the drivers can remove their kludges that try to work around the
> >> current limitations.
> 
> So I think maybe save msi chip in PCI arch sysdata is a good candidate.

Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
sysdata around the pci_host_bridge*.

Best regards,
Liviu

> 
> > 
> > I think both issues are orthogonal. Last time I checked a lot of work
> > was still necessary to unify host bridges enough so that it could be
> > shared across architectures. But perhaps some of that work has
> > happened in the meantime.
> > 
> > But like I said, when you create the root bus, you can easily attach the
> > MSI chip to it.
> > 
> > Thierry
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Fri, Sep 26, 2014 at 11:42:23AM +0800, Yijing Wang wrote:
> >> I am actually in disagreement with you, Thierry. I don't like the general direction
> >> of the patches, or at least I don't like the fact that we don't have a portable
> >> way of setting up the msi_chip without having to rely on weak architectural hooks.
> > 
> > Oh, good. That's actually one of the things I said I wasn't happy with
> > either. =)
> 
> Hm, I decide to drop weak arch_find_msi_chip(), no one likes it.
> Let's find a better solution :)
> 
> > 
> >> I'm surprised no one considers the case of a platform having more than one host
> >> bridge and possibly more than one MSI unit. With the current proposed patchset I
> >> can't see how that would work.
> > 
> > The PCI core can already deal with that. An MSI chip can be set per bus
> > and the weak pcibios_add_bus() can be used to set that. Often it might
> > not even be necessary to do it via pcibios_add_bus() if you create the
> > root bus directly, since you can attach the MSI chip at that time.
> 
> Yes, PCI hostbridge driver find the matched msi chip during its initialization,
> and assign the msi chip to PCI bus in pcibios_add_bus().
> 
> > 
> >> What I would like to see is a way of creating the pci_host_bridge structure outside
> >> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >> details like associated msi_chip into the host bridge and the child busses will
> >> have an easy way of finding the information needed by finding the root bus and then
> >> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >> everyone and the drivers can remove their kludges that try to work around the
> >> current limitations.
> 
> So I think maybe save msi chip in PCI arch sysdata is a good candidate.

Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
sysdata around the pci_host_bridge*.

Best regards,
Liviu

> 
> > 
> > I think both issues are orthogonal. Last time I checked a lot of work
> > was still necessary to unify host bridges enough so that it could be
> > shared across architectures. But perhaps some of that work has
> > happened in the meantime.
> > 
> > But like I said, when you create the root bus, you can easily attach the
> > MSI chip to it.
> > 
> > Thierry
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 3627 bytes --]

On Fri, Sep 26, 2014 at 02:20:35PM +0800, Yijing Wang wrote:
> >> The PCI core can already deal with that. An MSI chip can be set per bus
> >> and the weak pcibios_add_bus() can be used to set that. Often it might
> >> not even be necessary to do it via pcibios_add_bus() if you create the
> >> root bus directly, since you can attach the MSI chip at that time.
> > 
> > But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> > something that should be generic. You don't need to be called for every bus when all
> > you want is just the root bus in order to add the MSI chip. Also, from looking at
> > the current patchset, a lot of architectures would set the MSI chip to a global
> > variable, which means you don't have an option to choose the MSI chip based on the
> > bus.
> 
> I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
> and PCI bus.
> 
> In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
> So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
> PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
> PCI root bus and its child buses.

struct pci_sys_data is architecture specific, so the code won't become
any more generic than it is now.

> >>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>> details like associated msi_chip into the host bridge and the child busses will
> >>> have an easy way of finding the information needed by finding the root bus and then
> >>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>> everyone and the drivers can remove their kludges that try to work around the
> >>> current limitations.
> >>
> >> I think both issues are orthogonal. Last time I checked a lot of work
> >> was still necessary to unify host bridges enough so that it could be
> >> shared across architectures. But perhaps some of that work has
> >> happened in the meantime.
> > 
> > Breaking out the host bridge creation from root bus creation is not difficult, just not
> > agree upon. That would be the first step in making the generic host brige structure
> > useful for sharing, specially if used as a sort of "parent" structure that you can
> > wrap with your actual host bridge structure.
> 
> Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
> do it in another series.

I agree, this can be done step by step.

> And if we save msi chip in pci sysdata now, it will be easy to
> move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

But like I said above, we wouldn't gain anything by moving the MSI chip
into struct pci_sys_data, since the core code couldn't access it from
there. The code wouldn't become more generic than the current approach
of using pcibios_add_bus(). At least for Tegra it's trivial to just hook
it up in tegra_pcie_scan_bus() directly (patch attached). So I think a
generic solution would be to allow it to be easily associated with a
bus.

Perhaps it would be as simple as adding a pci_scan_root_bus_with_msi()
or something with a less awkward name, or extending the existing
pci_scan_root_bus() with an MSI chip parameter. The function already has
too many arguments for my taste, though, so I'd like to avoid the
latter.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 3627 bytes --]

On Fri, Sep 26, 2014 at 02:20:35PM +0800, Yijing Wang wrote:
> >> The PCI core can already deal with that. An MSI chip can be set per bus
> >> and the weak pcibios_add_bus() can be used to set that. Often it might
> >> not even be necessary to do it via pcibios_add_bus() if you create the
> >> root bus directly, since you can attach the MSI chip at that time.
> > 
> > But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> > something that should be generic. You don't need to be called for every bus when all
> > you want is just the root bus in order to add the MSI chip. Also, from looking at
> > the current patchset, a lot of architectures would set the MSI chip to a global
> > variable, which means you don't have an option to choose the MSI chip based on the
> > bus.
> 
> I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
> and PCI bus.
> 
> In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
> So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
> PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
> PCI root bus and its child buses.

struct pci_sys_data is architecture specific, so the code won't become
any more generic than it is now.

> >>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>> details like associated msi_chip into the host bridge and the child busses will
> >>> have an easy way of finding the information needed by finding the root bus and then
> >>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>> everyone and the drivers can remove their kludges that try to work around the
> >>> current limitations.
> >>
> >> I think both issues are orthogonal. Last time I checked a lot of work
> >> was still necessary to unify host bridges enough so that it could be
> >> shared across architectures. But perhaps some of that work has
> >> happened in the meantime.
> > 
> > Breaking out the host bridge creation from root bus creation is not difficult, just not
> > agree upon. That would be the first step in making the generic host brige structure
> > useful for sharing, specially if used as a sort of "parent" structure that you can
> > wrap with your actual host bridge structure.
> 
> Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
> do it in another series.

I agree, this can be done step by step.

> And if we save msi chip in pci sysdata now, it will be easy to
> move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

But like I said above, we wouldn't gain anything by moving the MSI chip
into struct pci_sys_data, since the core code couldn't access it from
there. The code wouldn't become more generic than the current approach
of using pcibios_add_bus(). At least for Tegra it's trivial to just hook
it up in tegra_pcie_scan_bus() directly (patch attached). So I think a
generic solution would be to allow it to be easily associated with a
bus.

Perhaps it would be as simple as adding a pci_scan_root_bus_with_msi()
or something with a less awkward name, or extending the existing
pci_scan_root_bus() with an MSI chip parameter. The function already has
too many arguments for my taste, though, so I'd like to avoid the
latter.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 3627 bytes --]

On Fri, Sep 26, 2014 at 02:20:35PM +0800, Yijing Wang wrote:
> >> The PCI core can already deal with that. An MSI chip can be set per bus
> >> and the weak pcibios_add_bus() can be used to set that. Often it might
> >> not even be necessary to do it via pcibios_add_bus() if you create the
> >> root bus directly, since you can attach the MSI chip at that time.
> > 
> > But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> > something that should be generic. You don't need to be called for every bus when all
> > you want is just the root bus in order to add the MSI chip. Also, from looking at
> > the current patchset, a lot of architectures would set the MSI chip to a global
> > variable, which means you don't have an option to choose the MSI chip based on the
> > bus.
> 
> I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
> and PCI bus.
> 
> In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
> So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
> PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
> PCI root bus and its child buses.

struct pci_sys_data is architecture specific, so the code won't become
any more generic than it is now.

> >>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>> details like associated msi_chip into the host bridge and the child busses will
> >>> have an easy way of finding the information needed by finding the root bus and then
> >>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>> everyone and the drivers can remove their kludges that try to work around the
> >>> current limitations.
> >>
> >> I think both issues are orthogonal. Last time I checked a lot of work
> >> was still necessary to unify host bridges enough so that it could be
> >> shared across architectures. But perhaps some of that work has
> >> happened in the meantime.
> > 
> > Breaking out the host bridge creation from root bus creation is not difficult, just not
> > agree upon. That would be the first step in making the generic host brige structure
> > useful for sharing, specially if used as a sort of "parent" structure that you can
> > wrap with your actual host bridge structure.
> 
> Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
> do it in another series.

I agree, this can be done step by step.

> And if we save msi chip in pci sysdata now, it will be easy to
> move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

But like I said above, we wouldn't gain anything by moving the MSI chip
into struct pci_sys_data, since the core code couldn't access it from
there. The code wouldn't become more generic than the current approach
of using pcibios_add_bus(). At least for Tegra it's trivial to just hook
it up in tegra_pcie_scan_bus() directly (patch attached). So I think a
generic solution would be to allow it to be easily associated with a
bus.

Perhaps it would be as simple as adding a pci_scan_root_bus_with_msi()
or something with a less awkward name, or extending the existing
pci_scan_root_bus() with an MSI chip parameter. The function already has
too many arguments for my taste, though, so I'd like to avoid the
latter.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 3627 bytes --]

On Fri, Sep 26, 2014 at 02:20:35PM +0800, Yijing Wang wrote:
> >> The PCI core can already deal with that. An MSI chip can be set per bus
> >> and the weak pcibios_add_bus() can be used to set that. Often it might
> >> not even be necessary to do it via pcibios_add_bus() if you create the
> >> root bus directly, since you can attach the MSI chip at that time.
> > 
> > But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> > something that should be generic. You don't need to be called for every bus when all
> > you want is just the root bus in order to add the MSI chip. Also, from looking at
> > the current patchset, a lot of architectures would set the MSI chip to a global
> > variable, which means you don't have an option to choose the MSI chip based on the
> > bus.
> 
> I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
> and PCI bus.
> 
> In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
> So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
> PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
> PCI root bus and its child buses.

struct pci_sys_data is architecture specific, so the code won't become
any more generic than it is now.

> >>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>> details like associated msi_chip into the host bridge and the child busses will
> >>> have an easy way of finding the information needed by finding the root bus and then
> >>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>> everyone and the drivers can remove their kludges that try to work around the
> >>> current limitations.
> >>
> >> I think both issues are orthogonal. Last time I checked a lot of work
> >> was still necessary to unify host bridges enough so that it could be
> >> shared across architectures. But perhaps some of that work has
> >> happened in the meantime.
> > 
> > Breaking out the host bridge creation from root bus creation is not difficult, just not
> > agree upon. That would be the first step in making the generic host brige structure
> > useful for sharing, specially if used as a sort of "parent" structure that you can
> > wrap with your actual host bridge structure.
> 
> Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
> do it in another series.

I agree, this can be done step by step.

> And if we save msi chip in pci sysdata now, it will be easy to
> move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

But like I said above, we wouldn't gain anything by moving the MSI chip
into struct pci_sys_data, since the core code couldn't access it from
there. The code wouldn't become more generic than the current approach
of using pcibios_add_bus(). At least for Tegra it's trivial to just hook
it up in tegra_pcie_scan_bus() directly (patch attached). So I think a
generic solution would be to allow it to be easily associated with a
bus.

Perhaps it would be as simple as adding a pci_scan_root_bus_with_msi()
or something with a less awkward name, or extending the existing
pci_scan_root_bus() with an MSI chip parameter. The function already has
too many arguments for my taste, though, so I'd like to avoid the
latter.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

On Fri, Sep 26, 2014 at 02:20:35PM +0800, Yijing Wang wrote:
> >> The PCI core can already deal with that. An MSI chip can be set per bus
> >> and the weak pcibios_add_bus() can be used to set that. Often it might
> >> not even be necessary to do it via pcibios_add_bus() if you create the
> >> root bus directly, since you can attach the MSI chip at that time.
> > 
> > But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> > something that should be generic. You don't need to be called for every bus when all
> > you want is just the root bus in order to add the MSI chip. Also, from looking at
> > the current patchset, a lot of architectures would set the MSI chip to a global
> > variable, which means you don't have an option to choose the MSI chip based on the
> > bus.
> 
> I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
> and PCI bus.
> 
> In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
> So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
> PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
> PCI root bus and its child buses.

struct pci_sys_data is architecture specific, so the code won't become
any more generic than it is now.

> >>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>> details like associated msi_chip into the host bridge and the child busses will
> >>> have an easy way of finding the information needed by finding the root bus and then
> >>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>> everyone and the drivers can remove their kludges that try to work around the
> >>> current limitations.
> >>
> >> I think both issues are orthogonal. Last time I checked a lot of work
> >> was still necessary to unify host bridges enough so that it could be
> >> shared across architectures. But perhaps some of that work has
> >> happened in the meantime.
> > 
> > Breaking out the host bridge creation from root bus creation is not difficult, just not
> > agree upon. That would be the first step in making the generic host brige structure
> > useful for sharing, specially if used as a sort of "parent" structure that you can
> > wrap with your actual host bridge structure.
> 
> Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
> do it in another series.

I agree, this can be done step by step.

> And if we save msi chip in pci sysdata now, it will be easy to
> move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

But like I said above, we wouldn't gain anything by moving the MSI chip
into struct pci_sys_data, since the core code couldn't access it from
there. The code wouldn't become more generic than the current approach
of using pcibios_add_bus(). At least for Tegra it's trivial to just hook
it up in tegra_pcie_scan_bus() directly (patch attached). So I think a
generic solution would be to allow it to be easily associated with a
bus.

Perhaps it would be as simple as adding a pci_scan_root_bus_with_msi()
or something with a less awkward name, or extending the existing
pci_scan_root_bus() with an MSI chip parameter. The function already has
too many arguments for my taste, though, so I'd like to avoid the
latter.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140926/a887458e/attachment.sig>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 3627 bytes --]

On Fri, Sep 26, 2014 at 02:20:35PM +0800, Yijing Wang wrote:
> >> The PCI core can already deal with that. An MSI chip can be set per bus
> >> and the weak pcibios_add_bus() can be used to set that. Often it might
> >> not even be necessary to do it via pcibios_add_bus() if you create the
> >> root bus directly, since you can attach the MSI chip at that time.
> > 
> > But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> > something that should be generic. You don't need to be called for every bus when all
> > you want is just the root bus in order to add the MSI chip. Also, from looking at
> > the current patchset, a lot of architectures would set the MSI chip to a global
> > variable, which means you don't have an option to choose the MSI chip based on the
> > bus.
> 
> I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
> and PCI bus.
> 
> In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
> So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
> PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
> PCI root bus and its child buses.

struct pci_sys_data is architecture specific, so the code won't become
any more generic than it is now.

> >>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>> details like associated msi_chip into the host bridge and the child busses will
> >>> have an easy way of finding the information needed by finding the root bus and then
> >>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>> everyone and the drivers can remove their kludges that try to work around the
> >>> current limitations.
> >>
> >> I think both issues are orthogonal. Last time I checked a lot of work
> >> was still necessary to unify host bridges enough so that it could be
> >> shared across architectures. But perhaps some of that work has
> >> happened in the meantime.
> > 
> > Breaking out the host bridge creation from root bus creation is not difficult, just not
> > agree upon. That would be the first step in making the generic host brige structure
> > useful for sharing, specially if used as a sort of "parent" structure that you can
> > wrap with your actual host bridge structure.
> 
> Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
> do it in another series.

I agree, this can be done step by step.

> And if we save msi chip in pci sysdata now, it will be easy to
> move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

But like I said above, we wouldn't gain anything by moving the MSI chip
into struct pci_sys_data, since the core code couldn't access it from
there. The code wouldn't become more generic than the current approach
of using pcibios_add_bus(). At least for Tegra it's trivial to just hook
it up in tegra_pcie_scan_bus() directly (patch attached). So I think a
generic solution would be to allow it to be easily associated with a
bus.

Perhaps it would be as simple as adding a pci_scan_root_bus_with_msi()
or something with a less awkward name, or extending the existing
pci_scan_root_bus() with an MSI chip parameter. The function already has
too many arguments for my taste, though, so I'd like to avoid the
latter.

Thierry

[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 3627 bytes --]

On Fri, Sep 26, 2014 at 02:20:35PM +0800, Yijing Wang wrote:
> >> The PCI core can already deal with that. An MSI chip can be set per bus
> >> and the weak pcibios_add_bus() can be used to set that. Often it might
> >> not even be necessary to do it via pcibios_add_bus() if you create the
> >> root bus directly, since you can attach the MSI chip at that time.
> > 
> > But I'm thinking that we need to move away from pcibios_add_bus() interface to do
> > something that should be generic. You don't need to be called for every bus when all
> > you want is just the root bus in order to add the MSI chip. Also, from looking at
> > the current patchset, a lot of architectures would set the MSI chip to a global
> > variable, which means you don't have an option to choose the MSI chip based on the
> > bus.
> 
> I also agree to remove the pcibios_add_bus() in arm which call .add_bus() to associate msi_chip
> and PCI bus.
> 
> In my opinions, all PCI devices under the same PCI hostbridge must share same msi chip, right ?
> So if we can associate msi chip and PCI hostbridge, every PCI device can find correct msi chip.
> PCI hostbridge private attributes can be saved in PCI sysdata, and this data will be propagate to
> PCI root bus and its child buses.

struct pci_sys_data is architecture specific, so the code won't become
any more generic than it is now.

> >>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>> details like associated msi_chip into the host bridge and the child busses will
> >>> have an easy way of finding the information needed by finding the root bus and then
> >>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>> everyone and the drivers can remove their kludges that try to work around the
> >>> current limitations.
> >>
> >> I think both issues are orthogonal. Last time I checked a lot of work
> >> was still necessary to unify host bridges enough so that it could be
> >> shared across architectures. But perhaps some of that work has
> >> happened in the meantime.
> > 
> > Breaking out the host bridge creation from root bus creation is not difficult, just not
> > agree upon. That would be the first step in making the generic host brige structure
> > useful for sharing, specially if used as a sort of "parent" structure that you can
> > wrap with your actual host bridge structure.
> 
> Breaking out the host bridge creation is a good idea, but there need a lot of changes, we can
> do it in another series.

I agree, this can be done step by step.

> And if we save msi chip in pci sysdata now, it will be easy to
> move it to generic pci host bridge. We can also move the pci domain number and other common info to it.

But like I said above, we wouldn't gain anything by moving the MSI chip
into struct pci_sys_data, since the core code couldn't access it from
there. The code wouldn't become more generic than the current approach
of using pcibios_add_bus(). At least for Tegra it's trivial to just hook
it up in tegra_pcie_scan_bus() directly (patch attached). So I think a
generic solution would be to allow it to be easily associated with a
bus.

Perhaps it would be as simple as adding a pci_scan_root_bus_with_msi()
or something with a less awkward name, or extending the existing
pci_scan_root_bus() with an MSI chip parameter. The function already has
too many arguments for my taste, though, so I'd like to avoid the
latter.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 214 bytes --]

On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
[...]
> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> directly (patch attached).

Really attached this time.

Thierry

[-- Attachment #1.2: 0001-PCI-tegra-Remove-.add_bus-callback.patch --]
[-- Type: text/x-diff, Size: 1945 bytes --]

From 2cedfcf38cdfe21688d1363659f28e271ce43358 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Fri, 26 Sep 2014 10:35:47 +0200
Subject: [PATCH] PCI: tegra: Remove .add_bus() callback

The .add_bus() callback is called for every bus and used to associate an
MSI chip with each bus. However the PCI core code already propagates the
root bus' MSI chip to child busses, so it is enough to associate the MSI
chip with the root bus upon creation. Conveniently the Tegra PCIe host
bridge driver creates the root bus directly, so the association can be
done at the same time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/pci/host/pci-tegra.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874319be..d314e549ac0c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -694,15 +694,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void tegra_pcie_add_bus(struct pci_bus *bus)
-{
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
-
-		bus->msi = &pcie->msi.chip;
-	}
-}
-
 static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
@@ -713,6 +704,9 @@ static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	if (!bus)
 		return NULL;
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		bus->msi = &pcie->msi.chip;
+
 	pci_scan_child_bus(bus);
 
 	return bus;
@@ -1885,7 +1879,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.add_bus = tegra_pcie_add_bus;
 	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
-- 
2.1.0


[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1.1: Type: text/plain, Size: 214 bytes --]

On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
[...]
> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> directly (patch attached).

Really attached this time.

Thierry

[-- Attachment #1.1.2: 0001-PCI-tegra-Remove-.add_bus-callback.patch --]
[-- Type: text/x-diff, Size: 2003 bytes --]

From 2cedfcf38cdfe21688d1363659f28e271ce43358 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Date: Fri, 26 Sep 2014 10:35:47 +0200
Subject: [PATCH] PCI: tegra: Remove .add_bus() callback

The .add_bus() callback is called for every bus and used to associate an
MSI chip with each bus. However the PCI core code already propagates the
root bus' MSI chip to child busses, so it is enough to associate the MSI
chip with the root bus upon creation. Conveniently the Tegra PCIe host
bridge driver creates the root bus directly, so the association can be
done at the same time.

Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/pci/host/pci-tegra.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874319be..d314e549ac0c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -694,15 +694,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void tegra_pcie_add_bus(struct pci_bus *bus)
-{
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
-
-		bus->msi = &pcie->msi.chip;
-	}
-}
-
 static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
@@ -713,6 +704,9 @@ static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	if (!bus)
 		return NULL;
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		bus->msi = &pcie->msi.chip;
+
 	pci_scan_child_bus(bus);
 
 	return bus;
@@ -1885,7 +1879,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.add_bus = tegra_pcie_add_bus;
 	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
-- 
2.1.0


[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 214 bytes --]

On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
[...]
> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> directly (patch attached).

Really attached this time.

Thierry

[-- Attachment #1.2: 0001-PCI-tegra-Remove-.add_bus-callback.patch --]
[-- Type: text/x-diff, Size: 1945 bytes --]

From 2cedfcf38cdfe21688d1363659f28e271ce43358 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Fri, 26 Sep 2014 10:35:47 +0200
Subject: [PATCH] PCI: tegra: Remove .add_bus() callback

The .add_bus() callback is called for every bus and used to associate an
MSI chip with each bus. However the PCI core code already propagates the
root bus' MSI chip to child busses, so it is enough to associate the MSI
chip with the root bus upon creation. Conveniently the Tegra PCIe host
bridge driver creates the root bus directly, so the association can be
done at the same time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/pci/host/pci-tegra.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874319be..d314e549ac0c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -694,15 +694,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void tegra_pcie_add_bus(struct pci_bus *bus)
-{
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
-
-		bus->msi = &pcie->msi.chip;
-	}
-}
-
 static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
@@ -713,6 +704,9 @@ static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	if (!bus)
 		return NULL;
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		bus->msi = &pcie->msi.chip;
+
 	pci_scan_child_bus(bus);
 
 	return bus;
@@ -1885,7 +1879,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.add_bus = tegra_pcie_add_bus;
 	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
-- 
2.1.0


[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 214 bytes --]

On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
[...]
> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> directly (patch attached).

Really attached this time.

Thierry

[-- Attachment #1.2: 0001-PCI-tegra-Remove-.add_bus-callback.patch --]
[-- Type: text/x-diff, Size: 1945 bytes --]

From 2cedfcf38cdfe21688d1363659f28e271ce43358 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Fri, 26 Sep 2014 10:35:47 +0200
Subject: [PATCH] PCI: tegra: Remove .add_bus() callback

The .add_bus() callback is called for every bus and used to associate an
MSI chip with each bus. However the PCI core code already propagates the
root bus' MSI chip to child busses, so it is enough to associate the MSI
chip with the root bus upon creation. Conveniently the Tegra PCIe host
bridge driver creates the root bus directly, so the association can be
done at the same time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/pci/host/pci-tegra.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874319be..d314e549ac0c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -694,15 +694,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void tegra_pcie_add_bus(struct pci_bus *bus)
-{
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
-
-		bus->msi = &pcie->msi.chip;
-	}
-}
-
 static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
@@ -713,6 +704,9 @@ static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	if (!bus)
 		return NULL;
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		bus->msi = &pcie->msi.chip;
+
 	pci_scan_child_bus(bus);
 
 	return bus;
@@ -1885,7 +1879,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.add_bus = tegra_pcie_add_bus;
 	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
-- 
2.1.0


[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
[...]
> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> directly (patch attached).

Really attached this time.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-PCI-tegra-Remove-.add_bus-callback.patch
Type: text/x-diff
Size: 1887 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140926/f14452d9/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140926/f14452d9/attachment.sig>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1.1: Type: text/plain, Size: 214 bytes --]

On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
[...]
> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> directly (patch attached).

Really attached this time.

Thierry

[-- Attachment #1.1.2: 0001-PCI-tegra-Remove-.add_bus-callback.patch --]
[-- Type: text/x-diff, Size: 1945 bytes --]

From 2cedfcf38cdfe21688d1363659f28e271ce43358 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Fri, 26 Sep 2014 10:35:47 +0200
Subject: [PATCH] PCI: tegra: Remove .add_bus() callback

The .add_bus() callback is called for every bus and used to associate an
MSI chip with each bus. However the PCI core code already propagates the
root bus' MSI chip to child busses, so it is enough to associate the MSI
chip with the root bus upon creation. Conveniently the Tegra PCIe host
bridge driver creates the root bus directly, so the association can be
done at the same time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/pci/host/pci-tegra.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874319be..d314e549ac0c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -694,15 +694,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void tegra_pcie_add_bus(struct pci_bus *bus)
-{
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
-
-		bus->msi = &pcie->msi.chip;
-	}
-}
-
 static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
@@ -713,6 +704,9 @@ static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	if (!bus)
 		return NULL;
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		bus->msi = &pcie->msi.chip;
+
 	pci_scan_child_bus(bus);
 
 	return bus;
@@ -1885,7 +1879,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.add_bus = tegra_pcie_add_bus;
 	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
-- 
2.1.0


[-- Attachment #1.2: Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 126 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
http://lists.xen.org/xen-devel

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Thierry Reding]

[-- Attachment #1.1: Type: text/plain, Size: 214 bytes --]

On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
[...]
> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> directly (patch attached).

Really attached this time.

Thierry

[-- Attachment #1.2: 0001-PCI-tegra-Remove-.add_bus-callback.patch --]
[-- Type: text/x-diff, Size: 1945 bytes --]

From 2cedfcf38cdfe21688d1363659f28e271ce43358 Mon Sep 17 00:00:00 2001
From: Thierry Reding <treding@nvidia.com>
Date: Fri, 26 Sep 2014 10:35:47 +0200
Subject: [PATCH] PCI: tegra: Remove .add_bus() callback

The .add_bus() callback is called for every bus and used to associate an
MSI chip with each bus. However the PCI core code already propagates the
root bus' MSI chip to child busses, so it is enough to associate the MSI
chip with the root bus upon creation. Conveniently the Tegra PCIe host
bridge driver creates the root bus directly, so the association can be
done at the same time.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/pci/host/pci-tegra.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 3d43874319be..d314e549ac0c 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -694,15 +694,6 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 	return irq;
 }
 
-static void tegra_pcie_add_bus(struct pci_bus *bus)
-{
-	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
-
-		bus->msi = &pcie->msi.chip;
-	}
-}
-
 static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
@@ -713,6 +704,9 @@ static struct pci_bus *tegra_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 	if (!bus)
 		return NULL;
 
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		bus->msi = &pcie->msi.chip;
+
 	pci_scan_child_bus(bus);
 
 	return bus;
@@ -1885,7 +1879,6 @@ static int tegra_pcie_enable(struct tegra_pcie *pcie)
 	hw.private_data = (void **)&pcie;
 	hw.setup = tegra_pcie_setup;
 	hw.map_irq = tegra_pcie_map_irq;
-	hw.add_bus = tegra_pcie_add_bus;
 	hw.scan = tegra_pcie_scan_bus;
 	hw.ops = &tegra_pcie_ops;
 
-- 
2.1.0


[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Fri, 26 Sep 2014, Yijing Wang wrote:
> On 2014/9/25 18:38, Thomas Gleixner wrote:
> > On Thu, 25 Sep 2014, Yijing Wang wrote:
> > 
> >> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> >> Currently, MSI chip associates pci bus to msi_chip. Because in
> >> ARM platform, there may be more than one MSI controller in system.
> >> Associate pci bus to msi_chip help pci device to find the match
> >> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> >> like in x86. we only need one MSI chip, because all device use
> >> the same MSI address/data and irq etc. So it's no need to associate
> >> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> >> to return the MSI chip for simplicity. The default weak
> >> arch_find_msi_chip() used in ARM platform, find the MSI chip
> >> by pci bus.
> > 
> > This is really backwards. On one hand you try to get rid of the weak
> > arch functions zoo and then you invent new ones for no good
> > reason. Why can't x86 store the chip in the pci bus?
> > 
> > Looking deeper, I'm questioning the whole notion of different
> > msi_chips. Are this really different MSI controllers with a different
> > feature set or are this defacto multiple instances of the same
> > controller which just need a different data set?
> 
> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
> It's difficult to extract the common data and code.
> 
> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
> remove lots of unnecessary MSI code.

That makes sense. Can you please make sure that this does not conflict
with the ongoing work Jiang is doing in the x86 irq area with
hierarchical irqdomains to distangle layered levels like MSI from the
underlying vector/irqremap mechanics.

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Fri, 26 Sep 2014, Yijing Wang wrote:
> On 2014/9/25 18:38, Thomas Gleixner wrote:
> > On Thu, 25 Sep 2014, Yijing Wang wrote:
> > 
> >> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> >> Currently, MSI chip associates pci bus to msi_chip. Because in
> >> ARM platform, there may be more than one MSI controller in system.
> >> Associate pci bus to msi_chip help pci device to find the match
> >> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> >> like in x86. we only need one MSI chip, because all device use
> >> the same MSI address/data and irq etc. So it's no need to associate
> >> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> >> to return the MSI chip for simplicity. The default weak
> >> arch_find_msi_chip() used in ARM platform, find the MSI chip
> >> by pci bus.
> > 
> > This is really backwards. On one hand you try to get rid of the weak
> > arch functions zoo and then you invent new ones for no good
> > reason. Why can't x86 store the chip in the pci bus?
> > 
> > Looking deeper, I'm questioning the whole notion of different
> > msi_chips. Are this really different MSI controllers with a different
> > feature set or are this defacto multiple instances of the same
> > controller which just need a different data set?
> 
> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
> It's difficult to extract the common data and code.
> 
> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
> remove lots of unnecessary MSI code.

That makes sense. Can you please make sure that this does not conflict
with the ongoing work Jiang is doing in the x86 irq area with
hierarchical irqdomains to distangle layered levels like MSI from the
underlying vector/irqremap mechanics.

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Fri, 26 Sep 2014, Yijing Wang wrote:
> On 2014/9/25 18:38, Thomas Gleixner wrote:
> > On Thu, 25 Sep 2014, Yijing Wang wrote:
> > 
> >> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> >> Currently, MSI chip associates pci bus to msi_chip. Because in
> >> ARM platform, there may be more than one MSI controller in system.
> >> Associate pci bus to msi_chip help pci device to find the match
> >> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> >> like in x86. we only need one MSI chip, because all device use
> >> the same MSI address/data and irq etc. So it's no need to associate
> >> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> >> to return the MSI chip for simplicity. The default weak
> >> arch_find_msi_chip() used in ARM platform, find the MSI chip
> >> by pci bus.
> > 
> > This is really backwards. On one hand you try to get rid of the weak
> > arch functions zoo and then you invent new ones for no good
> > reason. Why can't x86 store the chip in the pci bus?
> > 
> > Looking deeper, I'm questioning the whole notion of different
> > msi_chips. Are this really different MSI controllers with a different
> > feature set or are this defacto multiple instances of the same
> > controller which just need a different data set?
> 
> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
> It's difficult to extract the common data and code.
> 
> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
> remove lots of unnecessary MSI code.

That makes sense. Can you please make sure that this does not conflict
with the ongoing work Jiang is doing in the x86 irq area with
hierarchical irqdomains to distangle layered levels like MSI from the
underlying vector/irqremap mechanics.

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Fri, 26 Sep 2014, Yijing Wang wrote:
> On 2014/9/25 18:38, Thomas Gleixner wrote:
> > On Thu, 25 Sep 2014, Yijing Wang wrote:
> > 
> >> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> >> Currently, MSI chip associates pci bus to msi_chip. Because in
> >> ARM platform, there may be more than one MSI controller in system.
> >> Associate pci bus to msi_chip help pci device to find the match
> >> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> >> like in x86. we only need one MSI chip, because all device use
> >> the same MSI address/data and irq etc. So it's no need to associate
> >> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> >> to return the MSI chip for simplicity. The default weak
> >> arch_find_msi_chip() used in ARM platform, find the MSI chip
> >> by pci bus.
> > 
> > This is really backwards. On one hand you try to get rid of the weak
> > arch functions zoo and then you invent new ones for no good
> > reason. Why can't x86 store the chip in the pci bus?
> > 
> > Looking deeper, I'm questioning the whole notion of different
> > msi_chips. Are this really different MSI controllers with a different
> > feature set or are this defacto multiple instances of the same
> > controller which just need a different data set?
> 
> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
> It's difficult to extract the common data and code.
> 
> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
> remove lots of unnecessary MSI code.

That makes sense. Can you please make sure that this does not conflict
with the ongoing work Jiang is doing in the x86 irq area with
hierarchical irqdomains to distangle layered levels like MSI from the
underlying vector/irqremap mechanics.

Thanks,

	tglx

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Fri, 26 Sep 2014, Yijing Wang wrote:
> On 2014/9/25 18:38, Thomas Gleixner wrote:
> > On Thu, 25 Sep 2014, Yijing Wang wrote:
> > 
> >> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> >> Currently, MSI chip associates pci bus to msi_chip. Because in
> >> ARM platform, there may be more than one MSI controller in system.
> >> Associate pci bus to msi_chip help pci device to find the match
> >> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> >> like in x86. we only need one MSI chip, because all device use
> >> the same MSI address/data and irq etc. So it's no need to associate
> >> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> >> to return the MSI chip for simplicity. The default weak
> >> arch_find_msi_chip() used in ARM platform, find the MSI chip
> >> by pci bus.
> > 
> > This is really backwards. On one hand you try to get rid of the weak
> > arch functions zoo and then you invent new ones for no good
> > reason. Why can't x86 store the chip in the pci bus?
> > 
> > Looking deeper, I'm questioning the whole notion of different
> > msi_chips. Are this really different MSI controllers with a different
> > feature set or are this defacto multiple instances of the same
> > controller which just need a different data set?
> 
> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
> It's difficult to extract the common data and code.
> 
> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
> remove lots of unnecessary MSI code.

That makes sense. Can you please make sure that this does not conflict
with the ongoing work Jiang is doing in the x86 irq area with
hierarchical irqdomains to distangle layered levels like MSI from the
underlying vector/irqremap mechanics.

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Fri, 26 Sep 2014, Yijing Wang wrote:
> On 2014/9/25 18:38, Thomas Gleixner wrote:
> > On Thu, 25 Sep 2014, Yijing Wang wrote:
> > 
> >> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> >> Currently, MSI chip associates pci bus to msi_chip. Because in
> >> ARM platform, there may be more than one MSI controller in system.
> >> Associate pci bus to msi_chip help pci device to find the match
> >> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> >> like in x86. we only need one MSI chip, because all device use
> >> the same MSI address/data and irq etc. So it's no need to associate
> >> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> >> to return the MSI chip for simplicity. The default weak
> >> arch_find_msi_chip() used in ARM platform, find the MSI chip
> >> by pci bus.
> > 
> > This is really backwards. On one hand you try to get rid of the weak
> > arch functions zoo and then you invent new ones for no good
> > reason. Why can't x86 store the chip in the pci bus?
> > 
> > Looking deeper, I'm questioning the whole notion of different
> > msi_chips. Are this really different MSI controllers with a different
> > feature set or are this defacto multiple instances of the same
> > controller which just need a different data set?
> 
> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
> It's difficult to extract the common data and code.
> 
> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
> remove lots of unnecessary MSI code.

That makes sense. Can you please make sure that this does not conflict
with the ongoing work Jiang is doing in the x86 irq area with
hierarchical irqdomains to distangle layered levels like MSI from the
underlying vector/irqremap mechanics.

Thanks,

	tglx

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Thomas Gleixner]

On Fri, 26 Sep 2014, Yijing Wang wrote:
> On 2014/9/25 18:38, Thomas Gleixner wrote:
> > On Thu, 25 Sep 2014, Yijing Wang wrote:
> > 
> >> Introduce weak arch_find_msi_chip() to find the match msi_chip.
> >> Currently, MSI chip associates pci bus to msi_chip. Because in
> >> ARM platform, there may be more than one MSI controller in system.
> >> Associate pci bus to msi_chip help pci device to find the match
> >> msi_chip and setup MSI/MSI-X irq correctly. But in other platform,
> >> like in x86. we only need one MSI chip, because all device use
> >> the same MSI address/data and irq etc. So it's no need to associate
> >> pci bus to MSI chip, just use a arch function, arch_find_msi_chip()
> >> to return the MSI chip for simplicity. The default weak
> >> arch_find_msi_chip() used in ARM platform, find the MSI chip
> >> by pci bus.
> > 
> > This is really backwards. On one hand you try to get rid of the weak
> > arch functions zoo and then you invent new ones for no good
> > reason. Why can't x86 store the chip in the pci bus?
> > 
> > Looking deeper, I'm questioning the whole notion of different
> > msi_chips. Are this really different MSI controllers with a different
> > feature set or are this defacto multiple instances of the same
> > controller which just need a different data set?
> 
> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
> It's difficult to extract the common data and code.
> 
> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
> remove lots of unnecessary MSI code.

That makes sense. Can you please make sure that this does not conflict
with the ongoing work Jiang is doing in the x86 irq area with
hierarchical irqdomains to distangle layered levels like MSI from the
underlying vector/irqremap mechanics.

Thanks,

	tglx

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>> details like associated msi_chip into the host bridge and the child busses will
>>>> have an easy way of finding the information needed by finding the root bus and then
>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>> everyone and the drivers can remove their kludges that try to work around the
>>>> current limitations.
>>
>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> 
> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> sysdata around the pci_host_bridge*.

I inspected every arch and found there are almost no common stuff, and generic data struct should
be created in generic PCI code. Another, I don't like associate msi chip and every PCI device, further more,
almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>>
>>>
>>> I think both issues are orthogonal. Last time I checked a lot of work
>>> was still necessary to unify host bridges enough so that it could be
>>> shared across architectures. But perhaps some of that work has
>>> happened in the meantime.
>>>
>>> But like I said, when you create the root bus, you can easily attach the
>>> MSI chip to it.
>>>
>>> Thierry
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/26 17:05, Thierry Reding wrote:
> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> [...]
>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>> directly (patch attached).
> 
> Really attached this time.
> 
> Thierry
> 

It looks good to me, so I will update the arm pci hostbridge driver to assign
pci root bus the msi chip instead of current pcibios_add_bus(). But for other
platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
temporarily for more comments, especially from Bjorn.

Thanks!
Yijing.

-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

[PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 06/22] PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip

[Yijing Wang]

>> MSI chip in this series is to setup MSI irq, including IRQ allocation, Map,
>> compose MSI msg ..., in different platform, many arch specific MSI irq details in it.
>> It's difficult to extract the common data and code.
>>
>> I have a plan to rework MSI related irq_chips in kernel, PCI and Non-PCI, currently,
>> HPET, DMAR and PCI have their own irq_chip and MSI related functions, write_msi_msg(),
>> mask_msi_irq(), etc... I want to extract the common data set for that, so we can
>> remove lots of unnecessary MSI code.
> 
> That makes sense. Can you please make sure that this does not conflict
> with the ongoing work Jiang is doing in the x86 irq area with
> hierarchical irqdomains to distangle layered levels like MSI from the
> underlying vector/irqremap mechanics.

Yes, I'm reviewing Jiang hierarchical irqdomains series, I'm interested in that changes.

Thanks!
Yijing.

> 
> Thanks,
> 
> 	tglx
> 
> .
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 10:32, Yijing Wang wrote:
> On 2014/9/26 17:05, Thierry Reding wrote:
>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>> [...]
>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>> directly (patch attached).
>>
>> Really attached this time.
>>
>> Thierry
>>
> 
> It looks good to me, so I will update the arm pci hostbridge driver to assign
> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> temporarily for more comments, especially from Bjorn.

Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
assign msi chip to root bus in all host drivers's scan functions.

> 
> Thanks!
> Yijing.
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>> details like associated msi_chip into the host bridge and the child busses will
> >>>> have an easy way of finding the information needed by finding the root bus and then
> >>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>> everyone and the drivers can remove their kludges that try to work around the
> >>>> current limitations.
> >>
> >> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> > 
> > Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> > changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> > sysdata around the pci_host_bridge*.
> 
> I inspected every arch and found there are almost no common stuff,

I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
with the platform code due to convoluted way(s) in which PCI code gets instantiated.

What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
we will have more commonality and it will be easier to re-factor the code.

> and generic data struct should
> be created in generic PCI code.

Not necessarily. What I have in mind is something like this:

 - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
   and anything else that is needed (like find_pci_host_bridge() function).
 - arch code does:

	struct pci_controller {
		struct pci_host_bridge bridge;
		.....
	};

	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)

	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
	{
		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
		if (bridge)
			return to_pci_controller(bridge);

		return NULL;
	}

	int arch_pci_init(....)
	{
		struct pci_controller *hose;
		....
		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
		pci_init_host_bridge(&hose->bridge);
		....
		pci_scan_root_bus(...., &hose->bridge, &resources);
		....
		return 0;
	}

Then finding the right structure will be easy.

> Another, I don't like associate msi chip and every PCI device, further more,
> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>

I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
and for arches that don't care about MSI it doesn't get implemented.

Best regards,
Liviu

 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >>
> >>>
> >>> I think both issues are orthogonal. Last time I checked a lot of work
> >>> was still necessary to unify host bridges enough so that it could be
> >>> shared across architectures. But perhaps some of that work has
> >>> happened in the meantime.
> >>>
> >>> But like I said, when you create the root bus, you can easily attach the
> >>> MSI chip to it.
> >>>
> >>> Thierry
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>> details like associated msi_chip into the host bridge and the child busses will
> >>>> have an easy way of finding the information needed by finding the root bus and then
> >>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>> everyone and the drivers can remove their kludges that try to work around the
> >>>> current limitations.
> >>
> >> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> > 
> > Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> > changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> > sysdata around the pci_host_bridge*.
> 
> I inspected every arch and found there are almost no common stuff,

I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
with the platform code due to convoluted way(s) in which PCI code gets instantiated.

What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
we will have more commonality and it will be easier to re-factor the code.

> and generic data struct should
> be created in generic PCI code.

Not necessarily. What I have in mind is something like this:

 - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
   and anything else that is needed (like find_pci_host_bridge() function).
 - arch code does:

	struct pci_controller {
		struct pci_host_bridge bridge;
		.....
	};

	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)

	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
	{
		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
		if (bridge)
			return to_pci_controller(bridge);

		return NULL;
	}

	int arch_pci_init(....)
	{
		struct pci_controller *hose;
		....
		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
		pci_init_host_bridge(&hose->bridge);
		....
		pci_scan_root_bus(...., &hose->bridge, &resources);
		....
		return 0;
	}

Then finding the right structure will be easy.

> Another, I don't like associate msi chip and every PCI device, further more,
> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>

I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
and for arches that don't care about MSI it doesn't get implemented.

Best regards,
Liviu

 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >>
> >>>
> >>> I think both issues are orthogonal. Last time I checked a lot of work
> >>> was still necessary to unify host bridges enough so that it could be
> >>> shared across architectures. But perhaps some of that work has
> >>> happened in the meantime.
> >>>
> >>> But like I said, when you create the root bus, you can easily attach the
> >>> MSI chip to it.
> >>>
> >>> Thierry
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>> details like associated msi_chip into the host bridge and the child busses will
> >>>> have an easy way of finding the information needed by finding the root bus and then
> >>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>> everyone and the drivers can remove their kludges that try to work around the
> >>>> current limitations.
> >>
> >> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> > 
> > Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> > changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> > sysdata around the pci_host_bridge*.
> 
> I inspected every arch and found there are almost no common stuff,

I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
with the platform code due to convoluted way(s) in which PCI code gets instantiated.

What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
we will have more commonality and it will be easier to re-factor the code.

> and generic data struct should
> be created in generic PCI code.

Not necessarily. What I have in mind is something like this:

 - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
   and anything else that is needed (like find_pci_host_bridge() function).
 - arch code does:

	struct pci_controller {
		struct pci_host_bridge bridge;
		.....
	};

	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)

	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
	{
		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
		if (bridge)
			return to_pci_controller(bridge);

		return NULL;
	}

	int arch_pci_init(....)
	{
		struct pci_controller *hose;
		....
		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
		pci_init_host_bridge(&hose->bridge);
		....
		pci_scan_root_bus(...., &hose->bridge, &resources);
		....
		return 0;
	}

Then finding the right structure will be easy.

> Another, I don't like associate msi chip and every PCI device, further more,
> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>

I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
and for arches that don't care about MSI it doesn't get implemented.

Best regards,
Liviu

 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >>
> >>>
> >>> I think both issues are orthogonal. Last time I checked a lot of work
> >>> was still necessary to unify host bridges enough so that it could be
> >>> shared across architectures. But perhaps some of that work has
> >>> happened in the meantime.
> >>>
> >>> But like I said, when you create the root bus, you can easily attach the
> >>> MSI chip to it.
> >>>
> >>> Thierry
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>> details like associated msi_chip into the host bridge and the child busses will
> >>>> have an easy way of finding the information needed by finding the root bus and then
> >>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>> everyone and the drivers can remove their kludges that try to work around the
> >>>> current limitations.
> >>
> >> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> > 
> > Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> > changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> > sysdata around the pci_host_bridge*.
> 
> I inspected every arch and found there are almost no common stuff,

I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
with the platform code due to convoluted way(s) in which PCI code gets instantiated.

What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
we will have more commonality and it will be easier to re-factor the code.

> and generic data struct should
> be created in generic PCI code.

Not necessarily. What I have in mind is something like this:

 - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
   and anything else that is needed (like find_pci_host_bridge() function).
 - arch code does:

	struct pci_controller {
		struct pci_host_bridge bridge;
		.....
	};

	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)

	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
	{
		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
		if (bridge)
			return to_pci_controller(bridge);

		return NULL;
	}

	int arch_pci_init(....)
	{
		struct pci_controller *hose;
		....
		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
		pci_init_host_bridge(&hose->bridge);
		....
		pci_scan_root_bus(...., &hose->bridge, &resources);
		....
		return 0;
	}

Then finding the right structure will be easy.

> Another, I don't like associate msi chip and every PCI device, further more,
> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>

I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
and for arches that don't care about MSI it doesn't get implemented.

Best regards,
Liviu

 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >>
> >>>
> >>> I think both issues are orthogonal. Last time I checked a lot of work
> >>> was still necessary to unify host bridges enough so that it could be
> >>> shared across architectures. But perhaps some of that work has
> >>> happened in the meantime.
> >>>
> >>> But like I said, when you create the root bus, you can easily attach the
> >>> MSI chip to it.
> >>>
> >>> Thierry
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>> details like associated msi_chip into the host bridge and the child busses will
> >>>> have an easy way of finding the information needed by finding the root bus and then
> >>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>> everyone and the drivers can remove their kludges that try to work around the
> >>>> current limitations.
> >>
> >> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> > 
> > Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> > changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> > sysdata around the pci_host_bridge*.
> 
> I inspected every arch and found there are almost no common stuff,

I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
with the platform code due to convoluted way(s) in which PCI code gets instantiated.

What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
we will have more commonality and it will be easier to re-factor the code.

> and generic data struct should
> be created in generic PCI code.

Not necessarily. What I have in mind is something like this:

 - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
   and anything else that is needed (like find_pci_host_bridge() function).
 - arch code does:

	struct pci_controller {
		struct pci_host_bridge bridge;
		.....
	};

	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)

	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
	{
		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
		if (bridge)
			return to_pci_controller(bridge);

		return NULL;
	}

	int arch_pci_init(....)
	{
		struct pci_controller *hose;
		....
		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
		pci_init_host_bridge(&hose->bridge);
		....
		pci_scan_root_bus(...., &hose->bridge, &resources);
		....
		return 0;
	}

Then finding the right structure will be easy.

> Another, I don't like associate msi chip and every PCI device, further more,
> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>

I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
and for arches that don't care about MSI it doesn't get implemented.

Best regards,
Liviu

 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >>
> >>>
> >>> I think both issues are orthogonal. Last time I checked a lot of work
> >>> was still necessary to unify host bridges enough so that it could be
> >>> shared across architectures. But perhaps some of that work has
> >>> happened in the meantime.
> >>>
> >>> But like I said, when you create the root bus, you can easily attach the
> >>> MSI chip to it.
> >>>
> >>> Thierry
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>> details like associated msi_chip into the host bridge and the child busses will
> >>>> have an easy way of finding the information needed by finding the root bus and then
> >>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>> everyone and the drivers can remove their kludges that try to work around the
> >>>> current limitations.
> >>
> >> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> > 
> > Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> > changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> > sysdata around the pci_host_bridge*.
> 
> I inspected every arch and found there are almost no common stuff,

I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
with the platform code due to convoluted way(s) in which PCI code gets instantiated.

What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
we will have more commonality and it will be easier to re-factor the code.

> and generic data struct should
> be created in generic PCI code.

Not necessarily. What I have in mind is something like this:

 - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
   and anything else that is needed (like find_pci_host_bridge() function).
 - arch code does:

	struct pci_controller {
		struct pci_host_bridge bridge;
		.....
	};

	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)

	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
	{
		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
		if (bridge)
			return to_pci_controller(bridge);

		return NULL;
	}

	int arch_pci_init(....)
	{
		struct pci_controller *hose;
		....
		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
		pci_init_host_bridge(&hose->bridge);
		....
		pci_scan_root_bus(...., &hose->bridge, &resources);
		....
		return 0;
	}

Then finding the right structure will be easy.

> Another, I don't like associate msi chip and every PCI device, further more,
> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>

I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
and for arches that don't care about MSI it doesn't get implemented.

Best regards,
Liviu

 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >>
> >>>
> >>> I think both issues are orthogonal. Last time I checked a lot of work
> >>> was still necessary to unify host bridges enough so that it could be
> >>> shared across architectures. But perhaps some of that work has
> >>> happened in the meantime.
> >>>
> >>> But like I said, when you create the root bus, you can easily attach the
> >>> MSI chip to it.
> >>>
> >>> Thierry
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>> details like associated msi_chip into the host bridge and the child busses will
> >>>> have an easy way of finding the information needed by finding the root bus and then
> >>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>> everyone and the drivers can remove their kludges that try to work around the
> >>>> current limitations.
> >>
> >> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> > 
> > Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> > changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> > sysdata around the pci_host_bridge*.
> 
> I inspected every arch and found there are almost no common stuff,

I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
with the platform code due to convoluted way(s) in which PCI code gets instantiated.

What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
we will have more commonality and it will be easier to re-factor the code.

> and generic data struct should
> be created in generic PCI code.

Not necessarily. What I have in mind is something like this:

 - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
   and anything else that is needed (like find_pci_host_bridge() function).
 - arch code does:

	struct pci_controller {
		struct pci_host_bridge bridge;
		.....
	};

	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)

	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
	{
		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
		if (bridge)
			return to_pci_controller(bridge);

		return NULL;
	}

	int arch_pci_init(....)
	{
		struct pci_controller *hose;
		....
		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
		pci_init_host_bridge(&hose->bridge);
		....
		pci_scan_root_bus(...., &hose->bridge, &resources);
		....
		return 0;
	}

Then finding the right structure will be easy.

> Another, I don't like associate msi chip and every PCI device, further more,
> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>

I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
and for arches that don't care about MSI it doesn't get implemented.

Best regards,
Liviu

 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >>
> >>>
> >>> I think both issues are orthogonal. Last time I checked a lot of work
> >>> was still necessary to unify host bridges enough so that it could be
> >>> shared across architectures. But perhaps some of that work has
> >>> happened in the meantime.
> >>>
> >>> But like I said, when you create the root bus, you can easily attach the
> >>> MSI chip to it.
> >>>
> >>> Thierry
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/28 19:21, Liviu Dudau wrote:
> On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
>>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
>>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
>>>>>> details like associated msi_chip into the host bridge and the child busses will
>>>>>> have an easy way of finding the information needed by finding the root bus and then
>>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
>>>>>> everyone and the drivers can remove their kludges that try to work around the
>>>>>> current limitations.
>>>>
>>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
>>>
>>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
>>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
>>> sysdata around the pci_host_bridge*.
>>
>> I inspected every arch and found there are almost no common stuff,
> 
> I will disagree here. Most (all?) of the structures that are passed as sysdata argument to

Most.

> pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> with the platform code due to convoluted way(s) in which PCI code gets instantiated.

Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
pci scan functions.

> 
> What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> we will have more commonality and it will be easier to re-factor the code.

Now, I got it, thanks!

> 
>> and generic data struct should
>> be created in generic PCI code.
> 
> Not necessarily. What I have in mind is something like this:

This is a good idea, what I'm worried is this series is already large, so I think we need to post
another series to do it.


> 
>  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
>    and anything else that is needed (like find_pci_host_bridge() function).
>  - arch code does:
> 
> 	struct pci_controller {
> 		struct pci_host_bridge bridge;
> 		.....
> 	};
> 
> 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> 
> 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> 	{
> 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> 		if (bridge)
> 			return to_pci_controller(bridge);
> 
> 		return NULL;
> 	}
> 
> 	int arch_pci_init(....)
> 	{
> 		struct pci_controller *hose;
> 		....
> 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> 		pci_init_host_bridge(&hose->bridge);
> 		....
> 		pci_scan_root_bus(...., &hose->bridge, &resources);
> 		....
> 		return 0;
> 	}
> 
> Then finding the right structure will be easy.
> 
>> Another, I don't like associate msi chip and every PCI device, further more,
>> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
>> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
>> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
>>
> 
> I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> and for arches that don't care about MSI it doesn't get implemented.

Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

Thanks!
Yijing.

> 
> Best regards,
> Liviu
> 
>  
>> Thanks!
>> Yijing.
>>
>>>
>>> Best regards,
>>> Liviu
>>>
>>>>
>>>>>
>>>>> I think both issues are orthogonal. Last time I checked a lot of work
>>>>> was still necessary to unify host bridges enough so that it could be
>>>>> shared across architectures. But perhaps some of that work has
>>>>> happened in the meantime.
>>>>>
>>>>> But like I said, when you create the root bus, you can easily attach the
>>>>> MSI chip to it.
>>>>>
>>>>> Thierry
>>>>>
>>>>
>>>>
>>>> -- 
>>>> Thanks!
>>>> Yijing
>>>>
>>>>
>>>
>>
>>
>> -- 
>> Thanks!
>> Yijing
>>
>>
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Lucas Stach]

Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
> On 2014/9/28 10:32, Yijing Wang wrote:
> > On 2014/9/26 17:05, Thierry Reding wrote:
> >> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
> >> [...]
> >>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
> >>> directly (patch attached).
> >>
> >> Really attached this time.
> >>
> >> Thierry
> >>
> > 
> > It looks good to me, so I will update the arm pci hostbridge driver to assign
> > pci root bus the msi chip instead of current pcibios_add_bus(). But for other
> > platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
> > temporarily for more comments, especially from Bjorn.
> 
> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
> assign msi chip to root bus in all host drivers's scan functions.

Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
and I would think it would be no problem to to the same with rcar.

Regards,
Lucas

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Mon, Sep 29, 2014 at 09:44:17AM +0800, Yijing Wang wrote:
> On 2014/9/28 19:21, Liviu Dudau wrote:
> > On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>>>> details like associated msi_chip into the host bridge and the child busses will
> >>>>>> have an easy way of finding the information needed by finding the root bus and then
> >>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>>>> everyone and the drivers can remove their kludges that try to work around the
> >>>>>> current limitations.
> >>>>
> >>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> >>>
> >>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> >>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> >>> sysdata around the pci_host_bridge*.
> >>
> >> I inspected every arch and found there are almost no common stuff,
> > 
> > I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
> 
> Most.
> 
> > pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> > IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> > arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> > with the platform code due to convoluted way(s) in which PCI code gets instantiated.
> 
> Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
> resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
> pci scan functions.
> 
> > 
> > What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> > common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> > we will have more commonality and it will be easier to re-factor the code.
> 
> Now, I got it, thanks!
> 
> > 
> >> and generic data struct should
> >> be created in generic PCI code.
> > 
> > Not necessarily. What I have in mind is something like this:
> 
> This is a good idea, what I'm worried is this series is already large, so I think we need to post
> another series to do it.

I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
it comes to handling msi chip in an arch independent way.

> 
> 
> > 
> >  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
> >    and anything else that is needed (like find_pci_host_bridge() function).
> >  - arch code does:
> > 
> > 	struct pci_controller {
> > 		struct pci_host_bridge bridge;
> > 		.....
> > 	};
> > 
> > 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> > 
> > 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> > 	{
> > 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> > 		if (bridge)
> > 			return to_pci_controller(bridge);
> > 
> > 		return NULL;
> > 	}
> > 
> > 	int arch_pci_init(....)
> > 	{
> > 		struct pci_controller *hose;
> > 		....
> > 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> > 		pci_init_host_bridge(&hose->bridge);
> > 		....
> > 		pci_scan_root_bus(...., &hose->bridge, &resources);
> > 		....
> > 		return 0;
> > 	}
> > 
> > Then finding the right structure will be easy.
> > 
> >> Another, I don't like associate msi chip and every PCI device, further more,
> >> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> >> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> >> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
> >>
> > 
> > I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> > I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> > thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> > and for arches that don't care about MSI it doesn't get implemented.
> 
> Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
> be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

OK. But as you might have seen that still implies open coding a separate version of pci_scan_root_bus().

Best regards,
Liviu

> 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >  
> >> Thanks!
> >> Yijing.
> >>
> >>>
> >>> Best regards,
> >>> Liviu
> >>>
> >>>>
> >>>>>
> >>>>> I think both issues are orthogonal. Last time I checked a lot of work
> >>>>> was still necessary to unify host bridges enough so that it could be
> >>>>> shared across architectures. But perhaps some of that work has
> >>>>> happened in the meantime.
> >>>>>
> >>>>> But like I said, when you create the root bus, you can easily attach the
> >>>>> MSI chip to it.
> >>>>>
> >>>>> Thierry
> >>>>>
> >>>>
> >>>>
> >>>> -- 
> >>>> Thanks!
> >>>> Yijing
> >>>>
> >>>>
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Mon, Sep 29, 2014 at 09:44:17AM +0800, Yijing Wang wrote:
> On 2014/9/28 19:21, Liviu Dudau wrote:
> > On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>>>> details like associated msi_chip into the host bridge and the child busses will
> >>>>>> have an easy way of finding the information needed by finding the root bus and then
> >>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>>>> everyone and the drivers can remove their kludges that try to work around the
> >>>>>> current limitations.
> >>>>
> >>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> >>>
> >>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> >>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> >>> sysdata around the pci_host_bridge*.
> >>
> >> I inspected every arch and found there are almost no common stuff,
> > 
> > I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
> 
> Most.
> 
> > pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> > IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> > arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> > with the platform code due to convoluted way(s) in which PCI code gets instantiated.
> 
> Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
> resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
> pci scan functions.
> 
> > 
> > What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> > common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> > we will have more commonality and it will be easier to re-factor the code.
> 
> Now, I got it, thanks!
> 
> > 
> >> and generic data struct should
> >> be created in generic PCI code.
> > 
> > Not necessarily. What I have in mind is something like this:
> 
> This is a good idea, what I'm worried is this series is already large, so I think we need to post
> another series to do it.

I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
it comes to handling msi chip in an arch independent way.

> 
> 
> > 
> >  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
> >    and anything else that is needed (like find_pci_host_bridge() function).
> >  - arch code does:
> > 
> > 	struct pci_controller {
> > 		struct pci_host_bridge bridge;
> > 		.....
> > 	};
> > 
> > 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> > 
> > 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> > 	{
> > 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> > 		if (bridge)
> > 			return to_pci_controller(bridge);
> > 
> > 		return NULL;
> > 	}
> > 
> > 	int arch_pci_init(....)
> > 	{
> > 		struct pci_controller *hose;
> > 		....
> > 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> > 		pci_init_host_bridge(&hose->bridge);
> > 		....
> > 		pci_scan_root_bus(...., &hose->bridge, &resources);
> > 		....
> > 		return 0;
> > 	}
> > 
> > Then finding the right structure will be easy.
> > 
> >> Another, I don't like associate msi chip and every PCI device, further more,
> >> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> >> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> >> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
> >>
> > 
> > I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> > I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> > thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> > and for arches that don't care about MSI it doesn't get implemented.
> 
> Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
> be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

OK. But as you might have seen that still implies open coding a separate version of pci_scan_root_bus().

Best regards,
Liviu

> 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >  
> >> Thanks!
> >> Yijing.
> >>
> >>>
> >>> Best regards,
> >>> Liviu
> >>>
> >>>>
> >>>>>
> >>>>> I think both issues are orthogonal. Last time I checked a lot of work
> >>>>> was still necessary to unify host bridges enough so that it could be
> >>>>> shared across architectures. But perhaps some of that work has
> >>>>> happened in the meantime.
> >>>>>
> >>>>> But like I said, when you create the root bus, you can easily attach the
> >>>>> MSI chip to it.
> >>>>>
> >>>>> Thierry
> >>>>>
> >>>>
> >>>>
> >>>> -- 
> >>>> Thanks!
> >>>> Yijing
> >>>>
> >>>>
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Mon, Sep 29, 2014 at 09:44:17AM +0800, Yijing Wang wrote:
> On 2014/9/28 19:21, Liviu Dudau wrote:
> > On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>>>> details like associated msi_chip into the host bridge and the child busses will
> >>>>>> have an easy way of finding the information needed by finding the root bus and then
> >>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>>>> everyone and the drivers can remove their kludges that try to work around the
> >>>>>> current limitations.
> >>>>
> >>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> >>>
> >>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> >>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> >>> sysdata around the pci_host_bridge*.
> >>
> >> I inspected every arch and found there are almost no common stuff,
> > 
> > I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
> 
> Most.
> 
> > pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> > IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> > arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> > with the platform code due to convoluted way(s) in which PCI code gets instantiated.
> 
> Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
> resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
> pci scan functions.
> 
> > 
> > What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> > common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> > we will have more commonality and it will be easier to re-factor the code.
> 
> Now, I got it, thanks!
> 
> > 
> >> and generic data struct should
> >> be created in generic PCI code.
> > 
> > Not necessarily. What I have in mind is something like this:
> 
> This is a good idea, what I'm worried is this series is already large, so I think we need to post
> another series to do it.

I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
it comes to handling msi chip in an arch independent way.

> 
> 
> > 
> >  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
> >    and anything else that is needed (like find_pci_host_bridge() function).
> >  - arch code does:
> > 
> > 	struct pci_controller {
> > 		struct pci_host_bridge bridge;
> > 		.....
> > 	};
> > 
> > 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> > 
> > 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> > 	{
> > 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> > 		if (bridge)
> > 			return to_pci_controller(bridge);
> > 
> > 		return NULL;
> > 	}
> > 
> > 	int arch_pci_init(....)
> > 	{
> > 		struct pci_controller *hose;
> > 		....
> > 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> > 		pci_init_host_bridge(&hose->bridge);
> > 		....
> > 		pci_scan_root_bus(...., &hose->bridge, &resources);
> > 		....
> > 		return 0;
> > 	}
> > 
> > Then finding the right structure will be easy.
> > 
> >> Another, I don't like associate msi chip and every PCI device, further more,
> >> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> >> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> >> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
> >>
> > 
> > I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> > I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> > thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> > and for arches that don't care about MSI it doesn't get implemented.
> 
> Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
> be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

OK. But as you might have seen that still implies open coding a separate version of pci_scan_root_bus().

Best regards,
Liviu

> 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >  
> >> Thanks!
> >> Yijing.
> >>
> >>>
> >>> Best regards,
> >>> Liviu
> >>>
> >>>>
> >>>>>
> >>>>> I think both issues are orthogonal. Last time I checked a lot of work
> >>>>> was still necessary to unify host bridges enough so that it could be
> >>>>> shared across architectures. But perhaps some of that work has
> >>>>> happened in the meantime.
> >>>>>
> >>>>> But like I said, when you create the root bus, you can easily attach the
> >>>>> MSI chip to it.
> >>>>>
> >>>>> Thierry
> >>>>>
> >>>>
> >>>>
> >>>> -- 
> >>>> Thanks!
> >>>> Yijing
> >>>>
> >>>>
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Mon, Sep 29, 2014 at 09:44:17AM +0800, Yijing Wang wrote:
> On 2014/9/28 19:21, Liviu Dudau wrote:
> > On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>>>> details like associated msi_chip into the host bridge and the child busses will
> >>>>>> have an easy way of finding the information needed by finding the root bus and then
> >>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>>>> everyone and the drivers can remove their kludges that try to work around the
> >>>>>> current limitations.
> >>>>
> >>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> >>>
> >>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> >>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> >>> sysdata around the pci_host_bridge*.
> >>
> >> I inspected every arch and found there are almost no common stuff,
> > 
> > I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
> 
> Most.
> 
> > pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> > IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> > arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> > with the platform code due to convoluted way(s) in which PCI code gets instantiated.
> 
> Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
> resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
> pci scan functions.
> 
> > 
> > What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> > common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> > we will have more commonality and it will be easier to re-factor the code.
> 
> Now, I got it, thanks!
> 
> > 
> >> and generic data struct should
> >> be created in generic PCI code.
> > 
> > Not necessarily. What I have in mind is something like this:
> 
> This is a good idea, what I'm worried is this series is already large, so I think we need to post
> another series to do it.

I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
it comes to handling msi chip in an arch independent way.

> 
> 
> > 
> >  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
> >    and anything else that is needed (like find_pci_host_bridge() function).
> >  - arch code does:
> > 
> > 	struct pci_controller {
> > 		struct pci_host_bridge bridge;
> > 		.....
> > 	};
> > 
> > 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> > 
> > 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> > 	{
> > 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> > 		if (bridge)
> > 			return to_pci_controller(bridge);
> > 
> > 		return NULL;
> > 	}
> > 
> > 	int arch_pci_init(....)
> > 	{
> > 		struct pci_controller *hose;
> > 		....
> > 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> > 		pci_init_host_bridge(&hose->bridge);
> > 		....
> > 		pci_scan_root_bus(...., &hose->bridge, &resources);
> > 		....
> > 		return 0;
> > 	}
> > 
> > Then finding the right structure will be easy.
> > 
> >> Another, I don't like associate msi chip and every PCI device, further more,
> >> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> >> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> >> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
> >>
> > 
> > I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> > I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> > thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> > and for arches that don't care about MSI it doesn't get implemented.
> 
> Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
> be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

OK. But as you might have seen that still implies open coding a separate version of pci_scan_root_bus().

Best regards,
Liviu

> 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >  
> >> Thanks!
> >> Yijing.
> >>
> >>>
> >>> Best regards,
> >>> Liviu
> >>>
> >>>>
> >>>>>
> >>>>> I think both issues are orthogonal. Last time I checked a lot of work
> >>>>> was still necessary to unify host bridges enough so that it could be
> >>>>> shared across architectures. But perhaps some of that work has
> >>>>> happened in the meantime.
> >>>>>
> >>>>> But like I said, when you create the root bus, you can easily attach the
> >>>>> MSI chip to it.
> >>>>>
> >>>>> Thierry
> >>>>>
> >>>>
> >>>>
> >>>> -- 
> >>>> Thanks!
> >>>> Yijing
> >>>>
> >>>>
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Mon, Sep 29, 2014 at 09:44:17AM +0800, Yijing Wang wrote:
> On 2014/9/28 19:21, Liviu Dudau wrote:
> > On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>>>> details like associated msi_chip into the host bridge and the child busses will
> >>>>>> have an easy way of finding the information needed by finding the root bus and then
> >>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>>>> everyone and the drivers can remove their kludges that try to work around the
> >>>>>> current limitations.
> >>>>
> >>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> >>>
> >>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> >>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> >>> sysdata around the pci_host_bridge*.
> >>
> >> I inspected every arch and found there are almost no common stuff,
> > 
> > I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
> 
> Most.
> 
> > pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> > IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> > arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> > with the platform code due to convoluted way(s) in which PCI code gets instantiated.
> 
> Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
> resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
> pci scan functions.
> 
> > 
> > What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> > common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> > we will have more commonality and it will be easier to re-factor the code.
> 
> Now, I got it, thanks!
> 
> > 
> >> and generic data struct should
> >> be created in generic PCI code.
> > 
> > Not necessarily. What I have in mind is something like this:
> 
> This is a good idea, what I'm worried is this series is already large, so I think we need to post
> another series to do it.

I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
it comes to handling msi chip in an arch independent way.

> 
> 
> > 
> >  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
> >    and anything else that is needed (like find_pci_host_bridge() function).
> >  - arch code does:
> > 
> > 	struct pci_controller {
> > 		struct pci_host_bridge bridge;
> > 		.....
> > 	};
> > 
> > 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> > 
> > 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> > 	{
> > 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> > 		if (bridge)
> > 			return to_pci_controller(bridge);
> > 
> > 		return NULL;
> > 	}
> > 
> > 	int arch_pci_init(....)
> > 	{
> > 		struct pci_controller *hose;
> > 		....
> > 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> > 		pci_init_host_bridge(&hose->bridge);
> > 		....
> > 		pci_scan_root_bus(...., &hose->bridge, &resources);
> > 		....
> > 		return 0;
> > 	}
> > 
> > Then finding the right structure will be easy.
> > 
> >> Another, I don't like associate msi chip and every PCI device, further more,
> >> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> >> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> >> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
> >>
> > 
> > I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> > I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> > thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> > and for arches that don't care about MSI it doesn't get implemented.
> 
> Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
> be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

OK. But as you might have seen that still implies open coding a separate version of pci_scan_root_bus().

Best regards,
Liviu

> 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >  
> >> Thanks!
> >> Yijing.
> >>
> >>>
> >>> Best regards,
> >>> Liviu
> >>>
> >>>>
> >>>>>
> >>>>> I think both issues are orthogonal. Last time I checked a lot of work
> >>>>> was still necessary to unify host bridges enough so that it could be
> >>>>> shared across architectures. But perhaps some of that work has
> >>>>> happened in the meantime.
> >>>>>
> >>>>> But like I said, when you create the root bus, you can easily attach the
> >>>>> MSI chip to it.
> >>>>>
> >>>>> Thierry
> >>>>>
> >>>>
> >>>>
> >>>> -- 
> >>>> Thanks!
> >>>> Yijing
> >>>>
> >>>>
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Mon, Sep 29, 2014 at 09:44:17AM +0800, Yijing Wang wrote:
> On 2014/9/28 19:21, Liviu Dudau wrote:
> > On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>>>> details like associated msi_chip into the host bridge and the child busses will
> >>>>>> have an easy way of finding the information needed by finding the root bus and then
> >>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>>>> everyone and the drivers can remove their kludges that try to work around the
> >>>>>> current limitations.
> >>>>
> >>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> >>>
> >>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> >>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> >>> sysdata around the pci_host_bridge*.
> >>
> >> I inspected every arch and found there are almost no common stuff,
> > 
> > I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
> 
> Most.
> 
> > pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> > IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> > arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> > with the platform code due to convoluted way(s) in which PCI code gets instantiated.
> 
> Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
> resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
> pci scan functions.
> 
> > 
> > What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> > common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> > we will have more commonality and it will be easier to re-factor the code.
> 
> Now, I got it, thanks!
> 
> > 
> >> and generic data struct should
> >> be created in generic PCI code.
> > 
> > Not necessarily. What I have in mind is something like this:
> 
> This is a good idea, what I'm worried is this series is already large, so I think we need to post
> another series to do it.

I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
it comes to handling msi chip in an arch independent way.

> 
> 
> > 
> >  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
> >    and anything else that is needed (like find_pci_host_bridge() function).
> >  - arch code does:
> > 
> > 	struct pci_controller {
> > 		struct pci_host_bridge bridge;
> > 		.....
> > 	};
> > 
> > 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> > 
> > 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> > 	{
> > 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> > 		if (bridge)
> > 			return to_pci_controller(bridge);
> > 
> > 		return NULL;
> > 	}
> > 
> > 	int arch_pci_init(....)
> > 	{
> > 		struct pci_controller *hose;
> > 		....
> > 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> > 		pci_init_host_bridge(&hose->bridge);
> > 		....
> > 		pci_scan_root_bus(...., &hose->bridge, &resources);
> > 		....
> > 		return 0;
> > 	}
> > 
> > Then finding the right structure will be easy.
> > 
> >> Another, I don't like associate msi chip and every PCI device, further more,
> >> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> >> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> >> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
> >>
> > 
> > I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> > I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> > thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> > and for arches that don't care about MSI it doesn't get implemented.
> 
> Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
> be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

OK. But as you might have seen that still implies open coding a separate version of pci_scan_root_bus().

Best regards,
Liviu

> 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >  
> >> Thanks!
> >> Yijing.
> >>
> >>>
> >>> Best regards,
> >>> Liviu
> >>>
> >>>>
> >>>>>
> >>>>> I think both issues are orthogonal. Last time I checked a lot of work
> >>>>> was still necessary to unify host bridges enough so that it could be
> >>>>> shared across architectures. But perhaps some of that work has
> >>>>> happened in the meantime.
> >>>>>
> >>>>> But like I said, when you create the root bus, you can easily attach the
> >>>>> MSI chip to it.
> >>>>>
> >>>>> Thierry
> >>>>>
> >>>>
> >>>>
> >>>> -- 
> >>>> Thanks!
> >>>> Yijing
> >>>>
> >>>>
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Liviu Dudau]

On Mon, Sep 29, 2014 at 09:44:17AM +0800, Yijing Wang wrote:
> On 2014/9/28 19:21, Liviu Dudau wrote:
> > On Sun, Sep 28, 2014 at 10:16:12AM +0800, Yijing Wang wrote:
> >>>>>> What I would like to see is a way of creating the pci_host_bridge structure outside
> >>>>>> the pci_create_root_bus(). That would then allow us to pass this sort of platform
> >>>>>> details like associated msi_chip into the host bridge and the child busses will
> >>>>>> have an easy way of finding the information needed by finding the root bus and then
> >>>>>> the host bridge structure. Then the generic pci_scan_root_bus() can be used by (mostly)
> >>>>>> everyone and the drivers can remove their kludges that try to work around the
> >>>>>> current limitations.
> >>>>
> >>>> So I think maybe save msi chip in PCI arch sysdata is a good candidate.
> >>>
> >>> Except that arch sysdata at the moment is an opaque pointer. I am all in favour in
> >>> changing the type of sysdata from void* into pci_host_bridge* and arches can wrap their old
> >>> sysdata around the pci_host_bridge*.
> >>
> >> I inspected every arch and found there are almost no common stuff,
> > 
> > I will disagree here. Most (all?) of the structures that are passed as sysdata argument to
> 
> Most.
> 
> > pci_create_root_bus() or pci_scan_root_bus() have a set of resources for storing the MEM and
> > IO ranges, which struct pci_host_bridge already has. So that can be factored out of the
> > arch code. Same for pci_domain_nr. Then there are some variables that are used for communication
> > with the platform code due to convoluted way(s) in which PCI code gets instantiated.
> 
> Yes, currently some archs store MEM and IO resource in pci sysdata, and others not, move the MEM and IO
> resource to pci_host_bride could make code become simple, we can clean up the resource list argument in
> pci scan functions.
> 
> > 
> > What I am arguing here is not that the arch equivalent of pci_host_bridge structure is already
> > common, but that by moving the members that are common out of arch sysdata into pci_host_bridge
> > we will have more commonality and it will be easier to re-factor the code.
> 
> Now, I got it, thanks!
> 
> > 
> >> and generic data struct should
> >> be created in generic PCI code.
> > 
> > Not necessarily. What I have in mind is something like this:
> 
> This is a good idea, what I'm worried is this series is already large, so I think we need to post
> another series to do it.

I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
it comes to handling msi chip in an arch independent way.

> 
> 
> > 
> >  - drivers/pci/ exports pci_init_host_bridge() that does the initialisation of bridge->windows
> >    and anything else that is needed (like find_pci_host_bridge() function).
> >  - arch code does:
> > 
> > 	struct pci_controller {
> > 		struct pci_host_bridge bridge;
> > 		.....
> > 	};
> > 
> > 	#define to_pci_controller(bridge)	container_of(bridge, struct pci_controller, bridge)
> > 
> > 	static inline struct pci_controller *get_host_controller(const struct pci_bus *bus)
> > 	{
> > 		struct pci_host_bridge *bridge = find_pci_host_bridge(bus);
> > 		if (bridge)
> > 			return to_pci_controller(bridge);
> > 
> > 		return NULL;
> > 	}
> > 
> > 	int arch_pci_init(....)
> > 	{
> > 		struct pci_controller *hose;
> > 		....
> > 		hose = kzalloc(sizeof(*hose), GFP_KERNEL);
> > 		pci_init_host_bridge(&hose->bridge);
> > 		....
> > 		pci_scan_root_bus(...., &hose->bridge, &resources);
> > 		....
> > 		return 0;
> > 	}
> > 
> > Then finding the right structure will be easy.
> > 
> >> Another, I don't like associate msi chip and every PCI device, further more,
> >> almost all platforms except arm have only one MSI controller, and currently, PCI enumerating code doesn't need
> >> to know the MSI chip details, like for legacy IRQ, PCI device doesn't need to know which IRQ controller they
> >> should deliver IRQ to. I would think more about it, and hope other PCI guys can give some comments, especially from Bjorn.
> >>
> > 
> > I wasn't suggesing to associate an msi chip with every PCI device, but with the pci_host_bridge.
> > I don't expect a host bridge to have more than one msi chip, so that should be OK. Also, I'm
> > thinking that getting the associated msi chip should be some sort of pci_host_bridge ops function,
> > and for arches that don't care about MSI it doesn't get implemented.
> 
> Currently, a property "msi-parent" was introduced in arm, and all msi chip integrated in irq chip controller will
> be added to of_pci_msi_chip_list. PCI host driver find the match msi chip by its of_node.

OK. But as you might have seen that still implies open coding a separate version of pci_scan_root_bus().

Best regards,
Liviu

> 
> Thanks!
> Yijing.
> 
> > 
> > Best regards,
> > Liviu
> > 
> >  
> >> Thanks!
> >> Yijing.
> >>
> >>>
> >>> Best regards,
> >>> Liviu
> >>>
> >>>>
> >>>>>
> >>>>> I think both issues are orthogonal. Last time I checked a lot of work
> >>>>> was still necessary to unify host bridges enough so that it could be
> >>>>> shared across architectures. But perhaps some of that work has
> >>>>> happened in the meantime.
> >>>>>
> >>>>> But like I said, when you create the root bus, you can easily attach the
> >>>>> MSI chip to it.
> >>>>>
> >>>>> Thierry
> >>>>>
> >>>>
> >>>>
> >>>> -- 
> >>>> Thanks!
> >>>> Yijing
> >>>>
> >>>>
> >>>
> >>
> >>
> >> -- 
> >> Thanks!
> >> Yijing
> >>
> >>
> > 
> 
> 
> -- 
> Thanks!
> Yijing
> 
> 

-- 
-------------------
   .oooO
   (   )
    \ (  Oooo.
     \_) (   )
          ) /
         (_/

 One small step
   for me ...

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

>>> Not necessarily. What I have in mind is something like this:
>>
>> This is a good idea, what I'm worried is this series is already large, so I think we need to post
>> another series to do it.
> 
> I wasn't asking to do it here, I was just offering a suggestion (and sharing some experience) when
> it comes to handling msi chip in an arch independent way.

It's a good suggestion, thanks! :)

> 
>>
>>

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

Re: [PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

On 2014/9/29 16:37, Lucas Stach wrote:
> Am Sonntag, den 28.09.2014, 14:11 +0800 schrieb Yijing Wang:
>> On 2014/9/28 10:32, Yijing Wang wrote:
>>> On 2014/9/26 17:05, Thierry Reding wrote:
>>>> On Fri, Sep 26, 2014 at 10:54:32AM +0200, Thierry Reding wrote:
>>>> [...]
>>>>> At least for Tegra it's trivial to just hook it up in tegra_pcie_scan_bus()
>>>>> directly (patch attached).
>>>>
>>>> Really attached this time.
>>>>
>>>> Thierry
>>>>
>>>
>>> It looks good to me, so I will update the arm pci hostbridge driver to assign
>>> pci root bus the msi chip instead of current pcibios_add_bus(). But for other
>>> platforms which only have a one msi chip, I will kept the arch_find_msi_chip()
>>> temporarily for more comments, especially from Bjorn.
>>
>> Oh, sorry, I found designware and rcar use pci_scan_root_bus(), so we can not simply
>> assign msi chip to root bus in all host drivers's scan functions.
> 
> Designware will switch away from pci_scan_root_bus() in the 3.18 cycle
> and I would think it would be no problem to to the same with rcar.

Good.

> 
> Regards,
> Lucas
> 


-- 
Thanks!
Yijing

[PATCH v2 00/22] Use MSI chip framework to configure MSI/MSI-X in all platforms

[Yijing Wang]

This series is based Bjorn's pci/msi branch
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/msi

Currently, there are a lot of weak arch functions in MSI code.
Thierry Reding Introduced MSI chip framework to configure MSI/MSI-X in arm.
This series use MSI chip framework to refactor MSI code across all platforms
to eliminate weak arch functions. Then all MSI irqs will be managed in a 
unified framework. Because this series changed a lot of ARCH MSI code,
so tests in the platforms which MSI code modified are warmly welcomed!

v1->v2:
Add a patch to make s390 MSI code build happy between patch "x86/xen/MSI: E.."
and "s390/MSI: Use MSI..". Fix several typo problems found by Lucas.

RFC->v1: 
Updated "[patch 4/21] x86/xen/MSI: Eliminate...", export msi_chip instead
of #ifdef to fix MSI bug in xen running in x86. 
Rename arch_get_match_msi_chip() to arch_find_msi_chip().
Drop use struct device as the msi_chip argument, we will do that
later in another patchset.

Yijing Wang (22):
  PCI/MSI: Clean up struct msi_chip argument
  PCI/MSI: Remove useless bus->msi assignment
  MSI: Remove the redundant irq_set_chip_data()
  x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()
  s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()
  PCI/MSI: Introduce weak arch_find_msi_chip() to find MSI chip
  PCI/MSI: Refactor struct msi_chip to make it become more common
  x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  x86/MSI: Remove unused MSI weak arch functions
  MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlp: Remove the dead function destroy_irq() to fix build error
  MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq
  PCI/MSI: Clean up unused MSI arch functions

 arch/arm/mach-iop13xx/include/mach/pci.h |    2 +
 arch/arm/mach-iop13xx/iq81340mc.c        |    1 +
 arch/arm/mach-iop13xx/iq81340sc.c        |    1 +
 arch/arm/mach-iop13xx/msi.c              |    9 ++-
 arch/arm/mach-iop13xx/pci.c              |    6 ++
 arch/ia64/kernel/msi_ia64.c              |   18 ++++-
 arch/mips/pci/msi-octeon.c               |   35 ++++++----
 arch/mips/pci/msi-xlp.c                  |   18 ++++--
 arch/mips/pci/pci-xlr.c                  |   15 ++++-
 arch/powerpc/kernel/msi.c                |   14 +++-
 arch/s390/pci/pci.c                      |   18 ++++-
 arch/sparc/kernel/pci.c                  |   14 +++-
 arch/tile/kernel/pci_gx.c                |   14 +++-
 arch/x86/include/asm/apic.h              |    4 +
 arch/x86/include/asm/pci.h               |    4 +-
 arch/x86/include/asm/x86_init.h          |    7 --
 arch/x86/kernel/apic/io_apic.c           |   16 ++++-
 arch/x86/kernel/x86_init.c               |   34 ---------
 arch/x86/pci/xen.c                       |   60 +++++++++-------
 drivers/iommu/irq_remapping.c            |    9 ++-
 drivers/irqchip/irq-armada-370-xp.c      |    8 +--
 drivers/pci/host/pci-tegra.c             |    8 ++-
 drivers/pci/host/pcie-designware.c       |    4 +-
 drivers/pci/host/pcie-rcar.c             |    8 ++-
 drivers/pci/msi.c                        |  114 ++++++++++++++----------------
 drivers/pci/probe.c                      |    1 -
 include/linux/msi.h                      |   26 ++-----
 27 files changed, 266 insertions(+), 202 deletions(-)