All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Richardson <jonathar@broadcom.com>
To: Dmitry Torokhov <dtor@google.com>,
	Anatol Pomazau <anatol@google.com>,
	Jonathan Richardson <jonathar@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Ray Jui <rjui@broadcom.com>, Rob Herring <robh+dt@kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	"Kumar Gala" <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<bcm-kernel-feedback-list@broadcom.com>
Subject: [PATCH RESEND 1/1] ARM: dts: Enable Broadcom Cygnus BCM958305K
Date: Mon, 2 Mar 2015 14:41:10 -0800	[thread overview]
Message-ID: <1425336070-3414-2-git-send-email-jonathar@broadcom.com> (raw)
In-Reply-To: <1425336070-3414-1-git-send-email-jonathar@broadcom.com>

DT file to enable the Wireless Audio reference design based on the
BCM58305.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
---
 arch/arm/boot/dts/Makefile       |    3 ++-
 arch/arm/boot/dts/bcm958305k.dts |   53 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm958305k.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd..24b6084 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
 	bcm911360k.dtb \
-	bcm958300k.dtb
+	bcm958300k.dtb \
+	bcm958305k.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
new file mode 100644
index 0000000..56b429a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -0,0 +1,53 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus Wireless Audio (BCM958305K)";
+	compatible = "brcm,bcm58305", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS0,115200";
+	};
+
+	uart3: serial@18023000 {
+		status = "okay";
+	};
+};
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Richardson <jonathar@broadcom.com>
To: Dmitry Torokhov <dtor@google.com>,
	Anatol Pomazau <anatol@google.com>,
	Jonathan Richardson <jonathar@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Ray Jui <rjui@broadcom.com>, Rob Herring <robh+dt@kernel.org>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: [PATCH RESEND 1/1] ARM: dts: Enable Broadcom Cygnus BCM958305K
Date: Mon, 2 Mar 2015 14:41:10 -0800	[thread overview]
Message-ID: <1425336070-3414-2-git-send-email-jonathar@broadcom.com> (raw)
In-Reply-To: <1425336070-3414-1-git-send-email-jonathar@broadcom.com>

DT file to enable the Wireless Audio reference design based on the
BCM58305.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
---
 arch/arm/boot/dts/Makefile       |    3 ++-
 arch/arm/boot/dts/bcm958305k.dts |   53 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm958305k.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd..24b6084 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
 	bcm911360k.dtb \
-	bcm958300k.dtb
+	bcm958300k.dtb \
+	bcm958305k.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
new file mode 100644
index 0000000..56b429a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -0,0 +1,53 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus Wireless Audio (BCM958305K)";
+	compatible = "brcm,bcm58305", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS0,115200";
+	};
+
+	uart3: serial@18023000 {
+		status = "okay";
+	};
+};
-- 
1.7.9.5

WARNING: multiple messages have this Message-ID (diff)
From: jonathar@broadcom.com (Jonathan Richardson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND 1/1] ARM: dts: Enable Broadcom Cygnus BCM958305K
Date: Mon, 2 Mar 2015 14:41:10 -0800	[thread overview]
Message-ID: <1425336070-3414-2-git-send-email-jonathar@broadcom.com> (raw)
In-Reply-To: <1425336070-3414-1-git-send-email-jonathar@broadcom.com>

DT file to enable the Wireless Audio reference design based on the
BCM58305.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
---
 arch/arm/boot/dts/Makefile       |    3 ++-
 arch/arm/boot/dts/bcm958305k.dts |   53 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 55 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm958305k.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd..24b6084 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
 	bcm911360k.dtb \
-	bcm958300k.dtb
+	bcm958300k.dtb \
+	bcm958305k.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
new file mode 100644
index 0000000..56b429a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -0,0 +1,53 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus Wireless Audio (BCM958305K)";
+	compatible = "brcm,bcm58305", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS0,115200";
+	};
+
+	uart3: serial at 18023000 {
+		status = "okay";
+	};
+};
-- 
1.7.9.5

  reply	other threads:[~2015-03-02 22:39 UTC|newest]

Thread overview: 222+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Jonathan Richardson <jonathar@broadcom.com>
2014-09-16 19:58 ` [PATCH 0/6] Add initial support for Broadcom Cygnus SoC Jonathan Richardson
2014-09-16 19:58   ` Jonathan Richardson
2014-09-16 19:58   ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 1/6] ARM: cygnus: Initial " Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-17  0:00     ` Mark Rutland
2014-09-17  0:00       ` Mark Rutland
2014-09-17  0:00       ` Mark Rutland
2014-09-18 23:33       ` Jonathan Richardson
2014-09-18 23:33         ` Jonathan Richardson
2014-09-18 23:33         ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 2/6] clk: Clock driver " Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-17  0:47     ` Mark Rutland
2014-09-17  0:47       ` Mark Rutland
2014-09-17  0:47       ` Mark Rutland
2014-09-18 23:43       ` Jonathan Richardson
2014-09-18 23:43         ` Jonathan Richardson
2014-09-18 23:43         ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 4/6] ARM: dts: Enable Broadcom Cygnus SoC Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 5/6] ARM: cygnus defconfig : Initial defconfig for " Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-18 22:31   ` [PATCH 0/6] Add initial support for Broadcom Cygnus SoC Hauke Mehrtens
2014-09-18 22:31     ` Hauke Mehrtens
2014-09-18 22:31     ` Hauke Mehrtens
2014-09-18 22:39     ` Florian Fainelli
2014-09-18 22:39       ` Florian Fainelli
2014-09-18 22:54       ` Hauke Mehrtens
2014-09-18 22:54         ` Hauke Mehrtens
2014-09-18 22:54         ` Hauke Mehrtens
2014-09-19  0:58         ` Scott Branden
2014-09-19  0:58           ` Scott Branden
2014-09-23 21:17 ` [PATCH v2 " Jonathan Richardson
2014-09-23 21:17   ` Jonathan Richardson
2014-09-23 21:17   ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 1/6] ARM: cygnus: Initial " Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 2/6] clk: Clock driver " Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 4/6] ARM: dts: Enable Broadcom Cygnus SoC Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 5/6] ARM: cygnus defconfig : Initial defconfig for " Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-25 21:04   ` [PATCH v2 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-09-25 21:04     ` Scott Branden
2014-09-25 21:04     ` Scott Branden
2014-09-25 21:22     ` Florian Fainelli
2014-09-25 21:22       ` Florian Fainelli
2014-09-25 21:22       ` Florian Fainelli
2014-09-26  0:14       ` Florian Fainelli
2014-09-26  0:14         ` Florian Fainelli
2014-09-26  0:14         ` Florian Fainelli
2014-09-26  0:28         ` Jonathan Richardson
2014-09-26  0:28           ` Jonathan Richardson
2014-09-26  0:28           ` Jonathan Richardson
2014-09-26  0:34           ` Florian Fainelli
2014-09-26  0:34             ` Florian Fainelli
2014-09-26  0:34             ` Florian Fainelli
2014-12-11  1:07 ` [PATCH v2 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Jonathan Richardson
2014-12-11  1:07   ` Jonathan Richardson
2014-12-11  1:07   ` [PATCH v2 2/2] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
2014-12-11  1:07     ` Jonathan Richardson
2014-12-15  7:18   ` [PATCH v2 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Tim Kryger
2014-12-16 19:36     ` Jonathan Richardson
2014-12-16 19:36       ` Jonathan Richardson
2014-12-17 18:46 ` [PATCH v3 " Jonathan Richardson
2014-12-17 18:46   ` Jonathan Richardson
2014-12-17 18:46   ` [PATCH v3 2/2] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
2014-12-17 18:46     ` Jonathan Richardson
2014-12-20 22:38   ` [PATCH v3 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Tim Kryger
2014-12-22 22:49     ` Jonathan Richardson
2014-12-22 22:49       ` Jonathan Richardson
2014-12-18  1:59 ` [PATCH 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2014-12-18  1:59   ` Jonathan Richardson
2014-12-18  1:59   ` Jonathan Richardson
2014-12-18  1:59   ` [PATCH 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-18  2:14     ` Joe Perches
2014-12-18  2:14       ` Joe Perches
2014-12-19 19:51       ` Jonathan Richardson
2014-12-19 19:51         ` Jonathan Richardson
2014-12-19 19:51         ` Jonathan Richardson
2014-12-19 19:56         ` Dmitry Torokhov
2014-12-19 19:56           ` Dmitry Torokhov
2014-12-18  1:59   ` [PATCH 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-19 22:17 ` [PATCH v2 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2014-12-19 22:17   ` Jonathan Richardson
2014-12-19 22:17   ` Jonathan Richardson
2014-12-19 22:17   ` [PATCH v2 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-19 22:26     ` Joe Perches
2014-12-19 22:26       ` Joe Perches
2014-12-19 22:26       ` Joe Perches
2014-12-19 23:03       ` Jonathan Richardson
2014-12-19 23:03         ` Jonathan Richardson
2014-12-19 23:03         ` Jonathan Richardson
2015-01-01  0:55         ` Jonathan Richardson
2015-01-01  0:55           ` Jonathan Richardson
2015-01-01  0:55           ` Jonathan Richardson
2015-01-15  1:08         ` Florian Fainelli
2015-01-15  1:08           ` Florian Fainelli
2015-01-15 19:19           ` Jonathan Richardson
2015-01-15 19:19             ` Jonathan Richardson
2015-01-15 19:19             ` Jonathan Richardson
2015-01-15  1:02     ` Dmitry Torokhov
2015-01-15  1:02       ` Dmitry Torokhov
2015-01-15  5:44       ` Scott Branden
2015-01-15  5:44         ` Scott Branden
2015-01-15  5:44         ` Scott Branden
2015-01-15  6:07         ` Dmitry Torokhov
2015-01-15  6:07           ` Dmitry Torokhov
2015-01-15 19:51           ` Jonathan Richardson
2015-01-15 19:51             ` Jonathan Richardson
2015-01-15 19:51             ` Jonathan Richardson
2015-02-11 18:45             ` Jonathan Richardson
2015-02-11 18:45               ` Jonathan Richardson
2015-02-11 18:45               ` Jonathan Richardson
2015-02-24 23:18               ` Dmitry Torokhov
2015-02-24 23:18                 ` Dmitry Torokhov
2015-02-24 23:18                 ` Dmitry Torokhov
2015-02-27  1:02                 ` Jonathan Richardson
2015-02-27  1:02                   ` Jonathan Richardson
2015-02-27  1:02                   ` Jonathan Richardson
2015-02-24 23:29     ` Dmitry Torokhov
2015-02-24 23:29       ` Dmitry Torokhov
2015-02-24 23:29       ` Dmitry Torokhov
2015-03-02 19:13       ` Jonathan Richardson
2015-03-02 19:13         ` Jonathan Richardson
2015-03-02 19:13         ` Jonathan Richardson
2014-12-19 22:17   ` [PATCH v2 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-30 22:43 ` [PATCH v4 0/3] Fix bugs in kona pwm driver and pwm core Jonathan Richardson
2014-12-30 22:43   ` Jonathan Richardson
2014-12-30 22:43   ` [PATCH v4 1/3] pwm: kona: Fix incorrect config, disable, and polarity procedures Jonathan Richardson
2014-12-30 22:43     ` Jonathan Richardson
2014-12-30 22:43   ` [PATCH v4 2/3] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
2014-12-30 22:43     ` Jonathan Richardson
2015-01-05  1:12     ` Tim Kryger
2015-01-05  1:33       ` Tim Kryger
2014-12-30 22:43   ` [PATCH v4 3/3] pwm: core: Set enable state properly on failed call to enable Jonathan Richardson
2014-12-30 22:43     ` Jonathan Richardson
2015-01-07 19:42 ` [PATCH v5 0/2] Fix bugs in kona pwm driver and pwm core Jonathan Richardson
2015-01-07 19:42   ` Jonathan Richardson
2015-01-07 19:42   ` [PATCH v5 1/2] pwm: kona: Fix incorrect config, disable, and polarity procedures Jonathan Richardson
2015-01-07 19:42     ` Jonathan Richardson
2015-01-07 19:42   ` [PATCH v5 2/2] pwm: core: Set enable state properly on failed call to enable Jonathan Richardson
2015-01-07 19:42     ` Jonathan Richardson
2015-02-11 23:59     ` Dmitry Torokhov
2015-02-24 19:13 ` [PATCH 0/1] Enable Broadcom Cygnus BCM958305K Jonathan Richardson
2015-02-24 19:13   ` Jonathan Richardson
2015-02-24 19:13   ` Jonathan Richardson
2015-02-24 19:13   ` [PATCH 1/1] ARM: dts: " Jonathan Richardson
2015-02-24 19:13     ` Jonathan Richardson
2015-02-24 19:13     ` Jonathan Richardson
2015-02-25 19:04 ` [PATCH 0/1] Synopsis 8250 serial port driver fix Jonathan Richardson
2015-02-25 19:04   ` Jonathan Richardson
2015-02-25 19:04   ` [PATCH 1/1] serial: 8250_dw: Fix get_mctrl behaviour Jonathan Richardson
2015-02-25 19:04     ` Jonathan Richardson
2015-02-25 19:21     ` Arnd Bergmann
2015-02-25 20:00       ` Jonathan Richardson
2015-02-25 20:00         ` Jonathan Richardson
2015-02-25 20:07         ` Arnd Bergmann
2015-02-27  0:35 ` [PATCH v2 0/1] Synopsis 8250 serial port driver fix Jonathan Richardson
2015-02-27  0:35   ` Jonathan Richardson
2015-02-27  0:35   ` [PATCH v2 1/1] serial: 8250_dw: Fix get_mctrl behaviour Jonathan Richardson
2015-02-27  0:35     ` Jonathan Richardson
2015-03-09 18:40     ` Dmitry Torokhov
2015-03-09 18:51       ` Jonathan Richardson
2015-03-09 18:51         ` Jonathan Richardson
2015-03-02 22:41 ` [PATCH RESEND 0/1] Enable Broadcom Cygnus BCM958305K Jonathan Richardson
2015-03-02 22:41   ` Jonathan Richardson
2015-03-02 22:41   ` Jonathan Richardson
2015-03-02 22:41   ` Jonathan Richardson [this message]
2015-03-02 22:41     ` [PATCH RESEND 1/1] ARM: dts: " Jonathan Richardson
2015-03-02 22:41     ` Jonathan Richardson
2015-03-02 23:45     ` Florian Fainelli
2015-03-02 23:45       ` Florian Fainelli
2015-03-02 23:45       ` Florian Fainelli
2015-03-11  1:17 ` [PATCH v3 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2015-03-11  1:17   ` Jonathan Richardson
2015-03-11  1:17   ` [PATCH v3 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2015-03-11  1:17     ` Jonathan Richardson
2015-03-11  9:46     ` Paul Bolle
2015-03-11 17:05       ` Jonathan Richardson
2015-03-11 17:05         ` Jonathan Richardson
2015-03-11  1:17   ` [PATCH v3 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2015-03-11  1:17     ` Jonathan Richardson
2015-03-12 17:45 ` [PATCH v4 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2015-03-12 17:45   ` Jonathan Richardson
2015-03-12 17:45   ` [PATCH v4 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2015-03-12 17:45     ` Jonathan Richardson
2015-03-12 17:59     ` Joe Perches
2015-03-12 22:44       ` Jonathan Richardson
2015-03-12 22:44         ` Jonathan Richardson
2015-03-12 17:45   ` [PATCH v4 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2015-03-12 17:45     ` Jonathan Richardson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1425336070-3414-2-git-send-email-jonathar@broadcom.com \
    --to=jonathar@broadcom.com \
    --cc=anatol@google.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dtor@google.com \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sbranden@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.