All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Richardson <jonathar@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Joe Perches <joe@perches.com>, <devicetree@vger.kernel.org>,
	Ray Jui <rjui@broadcom.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	<linux-kernel@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
	<bcm-kernel-feedback-list@broadcom.com>,
	<linux-input@vger.kernel.org>,
	Grant Likely <grant.likely@linaro.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v2 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver
Date: Thu, 15 Jan 2015 11:19:21 -0800	[thread overview]
Message-ID: <54B812B9.3040400@broadcom.com> (raw)
In-Reply-To: <54B7132A.6030803@gmail.com>

On 15-01-14 05:08 PM, Florian Fainelli wrote:
> On 19/12/14 15:03, Jonathan Richardson wrote:
>> On 14-12-19 02:26 PM, Joe Perches wrote:
>>> On Fri, 2014-12-19 at 14:17 -0800, Jonathan Richardson wrote:
>>>> Add initial version of the Broadcom touchscreen driver.
>>>
>>> more trivia:
>>>
>>>> diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
>>> []
>>>> +static int get_tsc_config(struct device_node *np, struct iproc_ts_priv *priv)
>>>> +{
>>>> +	u32 val;
>>> []
>>>> +	if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 255) {
>>>> +			dev_err(dev, "debounce_timeout must be [0-255]\n");
>>>> +			return -EINVAL;
>>>> +		}
>>>> +		priv->cfg_params.debounce_timeout = val;
> 
> BTW, common practice for DT properties is to use a dash instead of an
> underscore for multi-worded properties.

ts-rotation is done that way already so I'll change the others to be
consistent. Thanks.

> 
>>>
>>> Doesn't the compiler generate a warning message
>>> about an impossible "unsigned < 0" test for all
>>> of these "val < 0" uses?
>>>
>>
>> Actually no it doesn't. The gcc output shows that neither -Wtype-limits
>> nor -Wextra are used to compile that file. I assume this is because
>> there would be just too many warnings.
>>
>>
>>>> +	}
>>>> +
>>>> +	if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 11) {
>>> []
>>>> +	if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 255) {
>>> []
>>>> +	if (of_property_read_u32(np, "average_data", &val) >= 0) {
>>>> +		if (val < 0 || val > 8) {
>>> []
>>>> +	if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
>>>> +		if (val < 0 || val > 31) {
>>>
>>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
> 
> 


WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Richardson <jonathar@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>
Cc: Joe Perches <joe@perches.com>,
	devicetree@vger.kernel.org, Ray Jui <rjui@broadcom.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-input@vger.kernel.org,
	Grant Likely <grant.likely@linaro.org>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver
Date: Thu, 15 Jan 2015 11:19:21 -0800	[thread overview]
Message-ID: <54B812B9.3040400@broadcom.com> (raw)
In-Reply-To: <54B7132A.6030803@gmail.com>

On 15-01-14 05:08 PM, Florian Fainelli wrote:
> On 19/12/14 15:03, Jonathan Richardson wrote:
>> On 14-12-19 02:26 PM, Joe Perches wrote:
>>> On Fri, 2014-12-19 at 14:17 -0800, Jonathan Richardson wrote:
>>>> Add initial version of the Broadcom touchscreen driver.
>>>
>>> more trivia:
>>>
>>>> diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
>>> []
>>>> +static int get_tsc_config(struct device_node *np, struct iproc_ts_priv *priv)
>>>> +{
>>>> +	u32 val;
>>> []
>>>> +	if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 255) {
>>>> +			dev_err(dev, "debounce_timeout must be [0-255]\n");
>>>> +			return -EINVAL;
>>>> +		}
>>>> +		priv->cfg_params.debounce_timeout = val;
> 
> BTW, common practice for DT properties is to use a dash instead of an
> underscore for multi-worded properties.

ts-rotation is done that way already so I'll change the others to be
consistent. Thanks.

> 
>>>
>>> Doesn't the compiler generate a warning message
>>> about an impossible "unsigned < 0" test for all
>>> of these "val < 0" uses?
>>>
>>
>> Actually no it doesn't. The gcc output shows that neither -Wtype-limits
>> nor -Wextra are used to compile that file. I assume this is because
>> there would be just too many warnings.
>>
>>
>>>> +	}
>>>> +
>>>> +	if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 11) {
>>> []
>>>> +	if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 255) {
>>> []
>>>> +	if (of_property_read_u32(np, "average_data", &val) >= 0) {
>>>> +		if (val < 0 || val > 8) {
>>> []
>>>> +	if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
>>>> +		if (val < 0 || val > 31) {
>>>
>>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
> 
> 


WARNING: multiple messages have this Message-ID (diff)
From: jonathar@broadcom.com (Jonathan Richardson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver
Date: Thu, 15 Jan 2015 11:19:21 -0800	[thread overview]
Message-ID: <54B812B9.3040400@broadcom.com> (raw)
In-Reply-To: <54B7132A.6030803@gmail.com>

On 15-01-14 05:08 PM, Florian Fainelli wrote:
> On 19/12/14 15:03, Jonathan Richardson wrote:
>> On 14-12-19 02:26 PM, Joe Perches wrote:
>>> On Fri, 2014-12-19 at 14:17 -0800, Jonathan Richardson wrote:
>>>> Add initial version of the Broadcom touchscreen driver.
>>>
>>> more trivia:
>>>
>>>> diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
>>> []
>>>> +static int get_tsc_config(struct device_node *np, struct iproc_ts_priv *priv)
>>>> +{
>>>> +	u32 val;
>>> []
>>>> +	if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 255) {
>>>> +			dev_err(dev, "debounce_timeout must be [0-255]\n");
>>>> +			return -EINVAL;
>>>> +		}
>>>> +		priv->cfg_params.debounce_timeout = val;
> 
> BTW, common practice for DT properties is to use a dash instead of an
> underscore for multi-worded properties.

ts-rotation is done that way already so I'll change the others to be
consistent. Thanks.

> 
>>>
>>> Doesn't the compiler generate a warning message
>>> about an impossible "unsigned < 0" test for all
>>> of these "val < 0" uses?
>>>
>>
>> Actually no it doesn't. The gcc output shows that neither -Wtype-limits
>> nor -Wextra are used to compile that file. I assume this is because
>> there would be just too many warnings.
>>
>>
>>>> +	}
>>>> +
>>>> +	if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 11) {
>>> []
>>>> +	if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
>>>> +		if (val < 0 || val > 255) {
>>> []
>>>> +	if (of_property_read_u32(np, "average_data", &val) >= 0) {
>>>> +		if (val < 0 || val > 8) {
>>> []
>>>> +	if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
>>>> +		if (val < 0 || val > 31) {
>>>
>>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
> 
> 

  reply	other threads:[~2015-01-15 19:19 UTC|newest]

Thread overview: 222+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <Jonathan Richardson <jonathar@broadcom.com>
2014-09-16 19:58 ` [PATCH 0/6] Add initial support for Broadcom Cygnus SoC Jonathan Richardson
2014-09-16 19:58   ` Jonathan Richardson
2014-09-16 19:58   ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 1/6] ARM: cygnus: Initial " Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-17  0:00     ` Mark Rutland
2014-09-17  0:00       ` Mark Rutland
2014-09-17  0:00       ` Mark Rutland
2014-09-18 23:33       ` Jonathan Richardson
2014-09-18 23:33         ` Jonathan Richardson
2014-09-18 23:33         ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 2/6] clk: Clock driver " Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-17  0:47     ` Mark Rutland
2014-09-17  0:47       ` Mark Rutland
2014-09-17  0:47       ` Mark Rutland
2014-09-18 23:43       ` Jonathan Richardson
2014-09-18 23:43         ` Jonathan Richardson
2014-09-18 23:43         ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 4/6] ARM: dts: Enable Broadcom Cygnus SoC Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 5/6] ARM: cygnus defconfig : Initial defconfig for " Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58   ` [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-16 19:58     ` Jonathan Richardson
2014-09-18 22:31   ` [PATCH 0/6] Add initial support for Broadcom Cygnus SoC Hauke Mehrtens
2014-09-18 22:31     ` Hauke Mehrtens
2014-09-18 22:31     ` Hauke Mehrtens
2014-09-18 22:39     ` Florian Fainelli
2014-09-18 22:39       ` Florian Fainelli
2014-09-18 22:54       ` Hauke Mehrtens
2014-09-18 22:54         ` Hauke Mehrtens
2014-09-18 22:54         ` Hauke Mehrtens
2014-09-19  0:58         ` Scott Branden
2014-09-19  0:58           ` Scott Branden
2014-09-23 21:17 ` [PATCH v2 " Jonathan Richardson
2014-09-23 21:17   ` Jonathan Richardson
2014-09-23 21:17   ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 1/6] ARM: cygnus: Initial " Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 2/6] clk: Clock driver " Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 4/6] ARM: dts: Enable Broadcom Cygnus SoC Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 5/6] ARM: cygnus defconfig : Initial defconfig for " Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17   ` [PATCH v2 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-23 21:17     ` Jonathan Richardson
2014-09-25 21:04   ` [PATCH v2 0/6] Add initial support for Broadcom Cygnus SoC Scott Branden
2014-09-25 21:04     ` Scott Branden
2014-09-25 21:04     ` Scott Branden
2014-09-25 21:22     ` Florian Fainelli
2014-09-25 21:22       ` Florian Fainelli
2014-09-25 21:22       ` Florian Fainelli
2014-09-26  0:14       ` Florian Fainelli
2014-09-26  0:14         ` Florian Fainelli
2014-09-26  0:14         ` Florian Fainelli
2014-09-26  0:28         ` Jonathan Richardson
2014-09-26  0:28           ` Jonathan Richardson
2014-09-26  0:28           ` Jonathan Richardson
2014-09-26  0:34           ` Florian Fainelli
2014-09-26  0:34             ` Florian Fainelli
2014-09-26  0:34             ` Florian Fainelli
2014-12-11  1:07 ` [PATCH v2 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Jonathan Richardson
2014-12-11  1:07   ` Jonathan Richardson
2014-12-11  1:07   ` [PATCH v2 2/2] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
2014-12-11  1:07     ` Jonathan Richardson
2014-12-15  7:18   ` [PATCH v2 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Tim Kryger
2014-12-16 19:36     ` Jonathan Richardson
2014-12-16 19:36       ` Jonathan Richardson
2014-12-17 18:46 ` [PATCH v3 " Jonathan Richardson
2014-12-17 18:46   ` Jonathan Richardson
2014-12-17 18:46   ` [PATCH v3 2/2] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
2014-12-17 18:46     ` Jonathan Richardson
2014-12-20 22:38   ` [PATCH v3 1/2] pwm: kona: Fix incorrect enable, config, and disable procedures Tim Kryger
2014-12-22 22:49     ` Jonathan Richardson
2014-12-22 22:49       ` Jonathan Richardson
2014-12-18  1:59 ` [PATCH 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2014-12-18  1:59   ` Jonathan Richardson
2014-12-18  1:59   ` Jonathan Richardson
2014-12-18  1:59   ` [PATCH 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-18  2:14     ` Joe Perches
2014-12-18  2:14       ` Joe Perches
2014-12-19 19:51       ` Jonathan Richardson
2014-12-19 19:51         ` Jonathan Richardson
2014-12-19 19:51         ` Jonathan Richardson
2014-12-19 19:56         ` Dmitry Torokhov
2014-12-19 19:56           ` Dmitry Torokhov
2014-12-18  1:59   ` [PATCH 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-18  1:59     ` Jonathan Richardson
2014-12-19 22:17 ` [PATCH v2 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2014-12-19 22:17   ` Jonathan Richardson
2014-12-19 22:17   ` Jonathan Richardson
2014-12-19 22:17   ` [PATCH v2 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-19 22:26     ` Joe Perches
2014-12-19 22:26       ` Joe Perches
2014-12-19 22:26       ` Joe Perches
2014-12-19 23:03       ` Jonathan Richardson
2014-12-19 23:03         ` Jonathan Richardson
2014-12-19 23:03         ` Jonathan Richardson
2015-01-01  0:55         ` Jonathan Richardson
2015-01-01  0:55           ` Jonathan Richardson
2015-01-01  0:55           ` Jonathan Richardson
2015-01-15  1:08         ` Florian Fainelli
2015-01-15  1:08           ` Florian Fainelli
2015-01-15 19:19           ` Jonathan Richardson [this message]
2015-01-15 19:19             ` Jonathan Richardson
2015-01-15 19:19             ` Jonathan Richardson
2015-01-15  1:02     ` Dmitry Torokhov
2015-01-15  1:02       ` Dmitry Torokhov
2015-01-15  5:44       ` Scott Branden
2015-01-15  5:44         ` Scott Branden
2015-01-15  5:44         ` Scott Branden
2015-01-15  6:07         ` Dmitry Torokhov
2015-01-15  6:07           ` Dmitry Torokhov
2015-01-15 19:51           ` Jonathan Richardson
2015-01-15 19:51             ` Jonathan Richardson
2015-01-15 19:51             ` Jonathan Richardson
2015-02-11 18:45             ` Jonathan Richardson
2015-02-11 18:45               ` Jonathan Richardson
2015-02-11 18:45               ` Jonathan Richardson
2015-02-24 23:18               ` Dmitry Torokhov
2015-02-24 23:18                 ` Dmitry Torokhov
2015-02-24 23:18                 ` Dmitry Torokhov
2015-02-27  1:02                 ` Jonathan Richardson
2015-02-27  1:02                   ` Jonathan Richardson
2015-02-27  1:02                   ` Jonathan Richardson
2015-02-24 23:29     ` Dmitry Torokhov
2015-02-24 23:29       ` Dmitry Torokhov
2015-02-24 23:29       ` Dmitry Torokhov
2015-03-02 19:13       ` Jonathan Richardson
2015-03-02 19:13         ` Jonathan Richardson
2015-03-02 19:13         ` Jonathan Richardson
2014-12-19 22:17   ` [PATCH v2 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-19 22:17     ` Jonathan Richardson
2014-12-30 22:43 ` [PATCH v4 0/3] Fix bugs in kona pwm driver and pwm core Jonathan Richardson
2014-12-30 22:43   ` Jonathan Richardson
2014-12-30 22:43   ` [PATCH v4 1/3] pwm: kona: Fix incorrect config, disable, and polarity procedures Jonathan Richardson
2014-12-30 22:43     ` Jonathan Richardson
2014-12-30 22:43   ` [PATCH v4 2/3] pwm: kona: Remove setting default smooth type and polarity for all channels Jonathan Richardson
2014-12-30 22:43     ` Jonathan Richardson
2015-01-05  1:12     ` Tim Kryger
2015-01-05  1:33       ` Tim Kryger
2014-12-30 22:43   ` [PATCH v4 3/3] pwm: core: Set enable state properly on failed call to enable Jonathan Richardson
2014-12-30 22:43     ` Jonathan Richardson
2015-01-07 19:42 ` [PATCH v5 0/2] Fix bugs in kona pwm driver and pwm core Jonathan Richardson
2015-01-07 19:42   ` Jonathan Richardson
2015-01-07 19:42   ` [PATCH v5 1/2] pwm: kona: Fix incorrect config, disable, and polarity procedures Jonathan Richardson
2015-01-07 19:42     ` Jonathan Richardson
2015-01-07 19:42   ` [PATCH v5 2/2] pwm: core: Set enable state properly on failed call to enable Jonathan Richardson
2015-01-07 19:42     ` Jonathan Richardson
2015-02-11 23:59     ` Dmitry Torokhov
2015-02-24 19:13 ` [PATCH 0/1] Enable Broadcom Cygnus BCM958305K Jonathan Richardson
2015-02-24 19:13   ` Jonathan Richardson
2015-02-24 19:13   ` Jonathan Richardson
2015-02-24 19:13   ` [PATCH 1/1] ARM: dts: " Jonathan Richardson
2015-02-24 19:13     ` Jonathan Richardson
2015-02-24 19:13     ` Jonathan Richardson
2015-02-25 19:04 ` [PATCH 0/1] Synopsis 8250 serial port driver fix Jonathan Richardson
2015-02-25 19:04   ` Jonathan Richardson
2015-02-25 19:04   ` [PATCH 1/1] serial: 8250_dw: Fix get_mctrl behaviour Jonathan Richardson
2015-02-25 19:04     ` Jonathan Richardson
2015-02-25 19:21     ` Arnd Bergmann
2015-02-25 20:00       ` Jonathan Richardson
2015-02-25 20:00         ` Jonathan Richardson
2015-02-25 20:07         ` Arnd Bergmann
2015-02-27  0:35 ` [PATCH v2 0/1] Synopsis 8250 serial port driver fix Jonathan Richardson
2015-02-27  0:35   ` Jonathan Richardson
2015-02-27  0:35   ` [PATCH v2 1/1] serial: 8250_dw: Fix get_mctrl behaviour Jonathan Richardson
2015-02-27  0:35     ` Jonathan Richardson
2015-03-09 18:40     ` Dmitry Torokhov
2015-03-09 18:51       ` Jonathan Richardson
2015-03-09 18:51         ` Jonathan Richardson
2015-03-02 22:41 ` [PATCH RESEND 0/1] Enable Broadcom Cygnus BCM958305K Jonathan Richardson
2015-03-02 22:41   ` Jonathan Richardson
2015-03-02 22:41   ` Jonathan Richardson
2015-03-02 22:41   ` [PATCH RESEND 1/1] ARM: dts: " Jonathan Richardson
2015-03-02 22:41     ` Jonathan Richardson
2015-03-02 22:41     ` Jonathan Richardson
2015-03-02 23:45     ` Florian Fainelli
2015-03-02 23:45       ` Florian Fainelli
2015-03-02 23:45       ` Florian Fainelli
2015-03-11  1:17 ` [PATCH v3 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2015-03-11  1:17   ` Jonathan Richardson
2015-03-11  1:17   ` [PATCH v3 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2015-03-11  1:17     ` Jonathan Richardson
2015-03-11  9:46     ` Paul Bolle
2015-03-11 17:05       ` Jonathan Richardson
2015-03-11 17:05         ` Jonathan Richardson
2015-03-11  1:17   ` [PATCH v3 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2015-03-11  1:17     ` Jonathan Richardson
2015-03-12 17:45 ` [PATCH v4 0/2] Add support for Broadcom iProc touchscreen Jonathan Richardson
2015-03-12 17:45   ` Jonathan Richardson
2015-03-12 17:45   ` [PATCH v4 1/2] Input: touchscreen-iproc: Add Broadcom iProc touchscreen driver Jonathan Richardson
2015-03-12 17:45     ` Jonathan Richardson
2015-03-12 17:59     ` Joe Perches
2015-03-12 22:44       ` Jonathan Richardson
2015-03-12 22:44         ` Jonathan Richardson
2015-03-12 17:45   ` [PATCH v4 2/2] Input: touchscreen-iproc: add device tree bindings Jonathan Richardson
2015-03-12 17:45     ` Jonathan Richardson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54B812B9.3040400@broadcom.com \
    --to=jonathar@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=f.fainelli@gmail.com \
    --cc=grant.likely@linaro.org \
    --cc=joe@perches.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.