* [PATCH] powerpc/dts: Update the core cluster PLL node(s) @ 2015-04-14 9:55 ` Igal.Liberman 0 siblings, 0 replies; 12+ messages in thread From: Igal.Liberman @ 2015-04-14 9:55 UTC (permalink / raw) To: devicetree, linuxppc-dev; +Cc: scottwood, Igal Liberman From: Igal Liberman <Igal.Liberman@freescale.com> This patch replaces the following: https://patchwork.ozlabs.org/patch/427664/ This patch is described by the following binding document update: https://patchwork.ozlabs.org/patch/461150/ Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> --- arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi index 48e0b6e..7e1f074 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi @@ -49,14 +49,16 @@ global-utilities@e1000 { reg = <0x800 0x4>; compatible = "fsl,qoriq-core-pll-2.0"; clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + clock-output-names = "pll0", "pll0-div2", "pll0-div3", + "pll0-div4"; }; pll1: pll1@820 { #clock-cells = <1>; reg = <0x820 0x4>; compatible = "fsl,qoriq-core-pll-2.0"; clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "pll1", "pll1-div2", "pll1-div3", + "pll1-div4"; }; platform_pll: platform-pll@c00 { #clock-cells = <1>; -- 1.7.9.5 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH] powerpc/dts: Update the core cluster PLL node(s) @ 2015-04-14 9:55 ` Igal.Liberman 0 siblings, 0 replies; 12+ messages in thread From: Igal.Liberman @ 2015-04-14 9:55 UTC (permalink / raw) To: devicetree, linuxppc-dev; +Cc: scottwood, Igal Liberman From: Igal Liberman <Igal.Liberman@freescale.com> This patch replaces the following: https://patchwork.ozlabs.org/patch/427664/ This patch is described by the following binding document update: https://patchwork.ozlabs.org/patch/461150/ Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> --- arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi index 48e0b6e..7e1f074 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi @@ -49,14 +49,16 @@ global-utilities@e1000 { reg = <0x800 0x4>; compatible = "fsl,qoriq-core-pll-2.0"; clocks = <&sysclk>; - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + clock-output-names = "pll0", "pll0-div2", "pll0-div3", + "pll0-div4"; }; pll1: pll1@820 { #clock-cells = <1>; reg = <0x820 0x4>; compatible = "fsl,qoriq-core-pll-2.0"; clocks = <&sysclk>; - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "pll1", "pll1-div2", "pll1-div3", + "pll1-div4"; }; platform_pll: platform-pll@c00 { #clock-cells = <1>; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) 2015-04-14 9:55 ` Igal.Liberman @ 2015-04-14 20:21 ` Scott Wood -1 siblings, 0 replies; 12+ messages in thread From: Scott Wood @ 2015-04-14 20:21 UTC (permalink / raw) To: Igal.Liberman; +Cc: devicetree, linuxppc-dev On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > From: Igal Liberman <Igal.Liberman@freescale.com> > > This patch replaces the following: > https://patchwork.ozlabs.org/patch/427664/ > > This patch is described by the following binding document update: > https://patchwork.ozlabs.org/patch/461150/ > > Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> > --- > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > index 48e0b6e..7e1f074 100644 > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > @@ -49,14 +49,16 @@ global-utilities@e1000 { > reg = <0x800 0x4>; > compatible = "fsl,qoriq-core-pll-2.0"; > clocks = <&sysclk>; > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > + "pll0-div4"; > }; > pll1: pll1@820 { > #clock-cells = <1>; > reg = <0x820 0x4>; > compatible = "fsl,qoriq-core-pll-2.0"; > clocks = <&sysclk>; > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > + "pll1-div4"; Wait, so if the driver implements the binding you submitted, you'll break compatibility with these older device trees... I think we need to just accept the ugly count-the-clock-names approach and document it. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) @ 2015-04-14 20:21 ` Scott Wood 0 siblings, 0 replies; 12+ messages in thread From: Scott Wood @ 2015-04-14 20:21 UTC (permalink / raw) To: Igal.Liberman; +Cc: devicetree, linuxppc-dev On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > From: Igal Liberman <Igal.Liberman@freescale.com> > > This patch replaces the following: > https://patchwork.ozlabs.org/patch/427664/ > > This patch is described by the following binding document update: > https://patchwork.ozlabs.org/patch/461150/ > > Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> > --- > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > index 48e0b6e..7e1f074 100644 > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > @@ -49,14 +49,16 @@ global-utilities@e1000 { > reg = <0x800 0x4>; > compatible = "fsl,qoriq-core-pll-2.0"; > clocks = <&sysclk>; > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > + "pll0-div4"; > }; > pll1: pll1@820 { > #clock-cells = <1>; > reg = <0x820 0x4>; > compatible = "fsl,qoriq-core-pll-2.0"; > clocks = <&sysclk>; > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > + "pll1-div4"; Wait, so if the driver implements the binding you submitted, you'll break compatibility with these older device trees... I think we need to just accept the ugly count-the-clock-names approach and document it. -Scott ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) 2015-04-14 20:21 ` Scott Wood @ 2015-04-14 20:22 ` Scott Wood -1 siblings, 0 replies; 12+ messages in thread From: Scott Wood @ 2015-04-14 20:22 UTC (permalink / raw) To: Igal.Liberman; +Cc: devicetree, linuxppc-dev On Tue, 2015-04-14 at 15:21 -0500, Scott Wood wrote: > On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > > From: Igal Liberman <Igal.Liberman@freescale.com> > > > > This patch replaces the following: > > https://patchwork.ozlabs.org/patch/427664/ > > > > This patch is described by the following binding document update: > > https://patchwork.ozlabs.org/patch/461150/ > > > > Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> > > --- > > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > index 48e0b6e..7e1f074 100644 > > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > @@ -49,14 +49,16 @@ global-utilities@e1000 { > > reg = <0x800 0x4>; > > compatible = "fsl,qoriq-core-pll-2.0"; > > clocks = <&sysclk>; > > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > > + "pll0-div4"; > > }; > > pll1: pll1@820 { > > #clock-cells = <1>; > > reg = <0x820 0x4>; > > compatible = "fsl,qoriq-core-pll-2.0"; > > clocks = <&sysclk>; > > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > > + "pll1-div4"; > > Wait, so if the driver implements the binding you submitted, you'll > break compatibility with these older device trees... > > I think we need to just accept the ugly count-the-clock-names approach > and document it. Is there any current 2.0 clock consumer that references pll-div4? -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) @ 2015-04-14 20:22 ` Scott Wood 0 siblings, 0 replies; 12+ messages in thread From: Scott Wood @ 2015-04-14 20:22 UTC (permalink / raw) To: Igal.Liberman; +Cc: devicetree, linuxppc-dev On Tue, 2015-04-14 at 15:21 -0500, Scott Wood wrote: > On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > > From: Igal Liberman <Igal.Liberman@freescale.com> > > > > This patch replaces the following: > > https://patchwork.ozlabs.org/patch/427664/ > > > > This patch is described by the following binding document update: > > https://patchwork.ozlabs.org/patch/461150/ > > > > Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> > > --- > > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > index 48e0b6e..7e1f074 100644 > > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > @@ -49,14 +49,16 @@ global-utilities@e1000 { > > reg = <0x800 0x4>; > > compatible = "fsl,qoriq-core-pll-2.0"; > > clocks = <&sysclk>; > > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > > + "pll0-div4"; > > }; > > pll1: pll1@820 { > > #clock-cells = <1>; > > reg = <0x820 0x4>; > > compatible = "fsl,qoriq-core-pll-2.0"; > > clocks = <&sysclk>; > > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > > + "pll1-div4"; > > Wait, so if the driver implements the binding you submitted, you'll > break compatibility with these older device trees... > > I think we need to just accept the ugly count-the-clock-names approach > and document it. Is there any current 2.0 clock consumer that references pll-div4? -Scott ^ permalink raw reply [flat|nested] 12+ messages in thread
[parent not found: <1429042950.22867.690.camel-KZfg59tc24xl57MIdRCFDg@public.gmane.org>]
* RE: [PATCH] powerpc/dts: Update the core cluster PLL node(s) 2015-04-14 20:22 ` Scott Wood @ 2015-04-15 11:07 ` Igal.Liberman -1 siblings, 0 replies; 12+ messages in thread From: Igal.Liberman-KZfg59tc24xl57MIdRCFDg @ 2015-04-15 11:07 UTC (permalink / raw) To: Scott Wood Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ Regards, Igal Liberman. > -----Original Message----- > From: Wood Scott-B07421 > Sent: Tuesday, April 14, 2015 11:23 PM > To: Liberman Igal-B31950 > Cc: devicetree@vger.kernel.org; linuxppc-dev@lists.ozlabs.org > Subject: Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) > > On Tue, 2015-04-14 at 15:21 -0500, Scott Wood wrote: > > On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > > > From: Igal Liberman <Igal.Liberman@freescale.com> > > > > > > This patch replaces the following: > > > https://patchwork.ozlabs.org/patch/427664/ > > > > > > This patch is described by the following binding document update: > > > https://patchwork.ozlabs.org/patch/461150/ > > > > > > Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> > > > --- > > > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > index 48e0b6e..7e1f074 100644 > > > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > @@ -49,14 +49,16 @@ global-utilities@e1000 { > > > reg = <0x800 0x4>; > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > clocks = <&sysclk>; > > > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > > > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > > > + "pll0-div4"; > > > }; > > > pll1: pll1@820 { > > > #clock-cells = <1>; > > > reg = <0x820 0x4>; > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > clocks = <&sysclk>; > > > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > > > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > > > + "pll1-div4"; > > > > Wait, so if the driver implements the binding you submitted, you'll > > break compatibility with these older device trees... > > > > I think we need to just accept the ugly count-the-clock-names approach > > and document it. > > Is there any current 2.0 clock consumer that references pll-div4? > I looked at T4240 for example, there's a mux node which adds pll-div4 option: mux0: mux0@0 { #clock-cells = <0>; reg = <0x0 0x4>; compatible = "fsl,qoriq-core-mux-2.0"; clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, <&pll1 0>, <&pll1 1>, <&pll1 2>, <&pll2 0>, <&pll2 1>, <&pll2 2>; clock-names = "pll0", "pll0-div2", "pll0-div4", "pll1", "pll1-div2", "pll1-div4", "pll2", "pll2-div2", "pll2-div4"; clock-output-names = "cmux0"; }; After this change <&pll0 2> will represent "pll0-div3" and not "pll0-div4". > -Scott ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH] powerpc/dts: Update the core cluster PLL node(s) @ 2015-04-15 11:07 ` Igal.Liberman 0 siblings, 0 replies; 12+ messages in thread From: Igal.Liberman @ 2015-04-15 11:07 UTC (permalink / raw) To: Scott Wood; +Cc: devicetree, linuxppc-dev DQoNClJlZ2FyZHMsDQpJZ2FsIExpYmVybWFuLg0KDQo+IC0tLS0tT3JpZ2luYWwgTWVzc2FnZS0t LS0tDQo+IEZyb206IFdvb2QgU2NvdHQtQjA3NDIxDQo+IFNlbnQ6IFR1ZXNkYXksIEFwcmlsIDE0 LCAyMDE1IDExOjIzIFBNDQo+IFRvOiBMaWJlcm1hbiBJZ2FsLUIzMTk1MA0KPiBDYzogZGV2aWNl dHJlZUB2Z2VyLmtlcm5lbC5vcmc7IGxpbnV4cHBjLWRldkBsaXN0cy5vemxhYnMub3JnDQo+IFN1 YmplY3Q6IFJlOiBbUEFUQ0hdIHBvd2VycGMvZHRzOiBVcGRhdGUgdGhlIGNvcmUgY2x1c3RlciBQ TEwgbm9kZShzKQ0KPiANCj4gT24gVHVlLCAyMDE1LTA0LTE0IGF0IDE1OjIxIC0wNTAwLCBTY290 dCBXb29kIHdyb3RlOg0KPiA+IE9uIFR1ZSwgMjAxNS0wNC0xNCBhdCAxMjo1NSArMDMwMCwgSWdh bC5MaWJlcm1hbiB3cm90ZToNCj4gPiA+IEZyb206IElnYWwgTGliZXJtYW4gPElnYWwuTGliZXJt YW5AZnJlZXNjYWxlLmNvbT4NCj4gPiA+DQo+ID4gPiBUaGlzIHBhdGNoIHJlcGxhY2VzIHRoZSBm b2xsb3dpbmc6DQo+ID4gPiAJaHR0cHM6Ly9wYXRjaHdvcmsub3psYWJzLm9yZy9wYXRjaC80Mjc2 NjQvDQo+ID4gPg0KPiA+ID4gVGhpcyBwYXRjaCBpcyBkZXNjcmliZWQgYnkgdGhlIGZvbGxvd2lu ZyBiaW5kaW5nIGRvY3VtZW50IHVwZGF0ZToNCj4gPiA+IAlodHRwczovL3BhdGNod29yay5vemxh YnMub3JnL3BhdGNoLzQ2MTE1MC8NCj4gPiA+DQo+ID4gPiBTaWduZWQtb2ZmLWJ5OiBJZ2FsIExp YmVybWFuIDxJZ2FsLkxpYmVybWFuQGZyZWVzY2FsZS5jb20+DQo+ID4gPiAtLS0NCj4gPiA+ICBh cmNoL3Bvd2VycGMvYm9vdC9kdHMvZnNsL3FvcmlxLWNsb2NrZ2VuMi5kdHNpIHwgICAgNiArKysr LS0NCj4gPiA+ICAxIGZpbGUgY2hhbmdlZCwgNCBpbnNlcnRpb25zKCspLCAyIGRlbGV0aW9ucygt KQ0KPiA+ID4NCj4gPiA+IGRpZmYgLS1naXQgYS9hcmNoL3Bvd2VycGMvYm9vdC9kdHMvZnNsL3Fv cmlxLWNsb2NrZ2VuMi5kdHNpDQo+ID4gPiBiL2FyY2gvcG93ZXJwYy9ib290L2R0cy9mc2wvcW9y aXEtY2xvY2tnZW4yLmR0c2kNCj4gPiA+IGluZGV4IDQ4ZTBiNmUuLjdlMWYwNzQgMTAwNjQ0DQo+ ID4gPiAtLS0gYS9hcmNoL3Bvd2VycGMvYm9vdC9kdHMvZnNsL3FvcmlxLWNsb2NrZ2VuMi5kdHNp DQo+ID4gPiArKysgYi9hcmNoL3Bvd2VycGMvYm9vdC9kdHMvZnNsL3FvcmlxLWNsb2NrZ2VuMi5k dHNpDQo+ID4gPiBAQCAtNDksMTQgKzQ5LDE2IEBAIGdsb2JhbC11dGlsaXRpZXNAZTEwMDAgew0K PiA+ID4gIAkJcmVnID0gPDB4ODAwIDB4ND47DQo+ID4gPiAgCQljb21wYXRpYmxlID0gImZzbCxx b3JpcS1jb3JlLXBsbC0yLjAiOw0KPiA+ID4gIAkJY2xvY2tzID0gPCZzeXNjbGs+Ow0KPiA+ID4g LQkJY2xvY2stb3V0cHV0LW5hbWVzID0gInBsbDAiLCAicGxsMC1kaXYyIiwgInBsbDAtZGl2NCI7 DQo+ID4gPiArCQljbG9jay1vdXRwdXQtbmFtZXMgPSAicGxsMCIsICJwbGwwLWRpdjIiLCAicGxs MC1kaXYzIiwNCj4gPiA+ICsJCQkJICAgICAgInBsbDAtZGl2NCI7DQo+ID4gPiAgCX07DQo+ID4g PiAgCXBsbDE6IHBsbDFAODIwIHsNCj4gPiA+ICAJCSNjbG9jay1jZWxscyA9IDwxPjsNCj4gPiA+ ICAJCXJlZyA9IDwweDgyMCAweDQ+Ow0KPiA+ID4gIAkJY29tcGF0aWJsZSA9ICJmc2wscW9yaXEt Y29yZS1wbGwtMi4wIjsNCj4gPiA+ICAJCWNsb2NrcyA9IDwmc3lzY2xrPjsNCj4gPiA+IC0JCWNs b2NrLW91dHB1dC1uYW1lcyA9ICJwbGwxIiwgInBsbDEtZGl2MiIsICJwbGwxLWRpdjQiOw0KPiA+ ID4gKwkJY2xvY2stb3V0cHV0LW5hbWVzID0gInBsbDEiLCAicGxsMS1kaXYyIiwgInBsbDEtZGl2 MyIsDQo+ID4gPiArCQkJCSAgICAgICJwbGwxLWRpdjQiOw0KPiA+DQo+ID4gV2FpdCwgc28gaWYg dGhlIGRyaXZlciBpbXBsZW1lbnRzIHRoZSBiaW5kaW5nIHlvdSBzdWJtaXR0ZWQsIHlvdSdsbA0K PiA+IGJyZWFrIGNvbXBhdGliaWxpdHkgd2l0aCB0aGVzZSBvbGRlciBkZXZpY2UgdHJlZXMuLi4N Cj4gPg0KPiA+IEkgdGhpbmsgd2UgbmVlZCB0byBqdXN0IGFjY2VwdCB0aGUgdWdseSBjb3VudC10 aGUtY2xvY2stbmFtZXMgYXBwcm9hY2gNCj4gPiBhbmQgZG9jdW1lbnQgaXQuDQo+IA0KPiBJcyB0 aGVyZSBhbnkgY3VycmVudCAyLjAgY2xvY2sgY29uc3VtZXIgdGhhdCByZWZlcmVuY2VzIHBsbC1k aXY0Pw0KPiANCg0KSSBsb29rZWQgYXQgVDQyNDAgZm9yIGV4YW1wbGUsIHRoZXJlJ3MgYSBtdXgg bm9kZSB3aGljaCBhZGRzIHBsbC1kaXY0IG9wdGlvbjoNCm11eDA6IG11eDBAMCB7DQoJI2Nsb2Nr LWNlbGxzID0gPDA+Ow0KCXJlZyA9IDwweDAgMHg0PjsNCgljb21wYXRpYmxlID0gImZzbCxxb3Jp cS1jb3JlLW11eC0yLjAiOw0KCWNsb2NrcyA9IDwmcGxsMCAwPiwgPCZwbGwwIDE+LCA8JnBsbDAg Mj4sDQoJCTwmcGxsMSAwPiwgPCZwbGwxIDE+LCA8JnBsbDEgMj4sDQoJCTwmcGxsMiAwPiwgPCZw bGwyIDE+LCA8JnBsbDIgMj47DQoJY2xvY2stbmFtZXMgPSAicGxsMCIsICJwbGwwLWRpdjIiLCAi cGxsMC1kaXY0IiwNCgkJInBsbDEiLCAicGxsMS1kaXYyIiwgInBsbDEtZGl2NCIsDQoJCSJwbGwy IiwgInBsbDItZGl2MiIsICJwbGwyLWRpdjQiOw0KCWNsb2NrLW91dHB1dC1uYW1lcyA9ICJjbXV4 MCI7DQp9Ow0KDQpBZnRlciB0aGlzIGNoYW5nZSA8JnBsbDAgMj4gd2lsbCByZXByZXNlbnQgInBs bDAtZGl2MyIgYW5kIG5vdCAicGxsMC1kaXY0Ii4NCiANCj4gLVNjb3R0DQoNCg== ^ permalink raw reply [flat|nested] 12+ messages in thread
[parent not found: <DM2PR03MB3831BEEDD2C17991818FFA9E6E50-ufbTtyGzTTRJonC5hhDUuuO6mTEJWrR4XA4E9RH9d+qIuWR1G4zioA@public.gmane.org>]
* Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) 2015-04-15 11:07 ` Igal.Liberman @ 2015-04-15 17:14 ` Scott Wood -1 siblings, 0 replies; 12+ messages in thread From: Scott Wood @ 2015-04-15 17:14 UTC (permalink / raw) To: Liberman Igal-B31950 Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ On Wed, 2015-04-15 at 06:07 -0500, Liberman Igal-B31950 wrote: > > > Regards, > Igal Liberman. > > > -----Original Message----- > > From: Wood Scott-B07421 > > Sent: Tuesday, April 14, 2015 11:23 PM > > To: Liberman Igal-B31950 > > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org > > Subject: Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) > > > > On Tue, 2015-04-14 at 15:21 -0500, Scott Wood wrote: > > > On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > > > > From: Igal Liberman <Igal.Liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > > > > > > > > This patch replaces the following: > > > > https://patchwork.ozlabs.org/patch/427664/ > > > > > > > > This patch is described by the following binding document update: > > > > https://patchwork.ozlabs.org/patch/461150/ > > > > > > > > Signed-off-by: Igal Liberman <Igal.Liberman-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > > > > --- > > > > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > index 48e0b6e..7e1f074 100644 > > > > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > @@ -49,14 +49,16 @@ global-utilities@e1000 { > > > > reg = <0x800 0x4>; > > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > > clocks = <&sysclk>; > > > > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > > > > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > > > > + "pll0-div4"; > > > > }; > > > > pll1: pll1@820 { > > > > #clock-cells = <1>; > > > > reg = <0x820 0x4>; > > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > > clocks = <&sysclk>; > > > > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > > > > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > > > > + "pll1-div4"; > > > > > > Wait, so if the driver implements the binding you submitted, you'll > > > break compatibility with these older device trees... > > > > > > I think we need to just accept the ugly count-the-clock-names approach > > > and document it. > > > > Is there any current 2.0 clock consumer that references pll-div4? > > > > I looked at T4240 for example, there's a mux node which adds pll-div4 option: > mux0: mux0@0 { > #clock-cells = <0>; > reg = <0x0 0x4>; > compatible = "fsl,qoriq-core-mux-2.0"; > clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, > <&pll1 0>, <&pll1 1>, <&pll1 2>, > <&pll2 0>, <&pll2 1>, <&pll2 2>; > clock-names = "pll0", "pll0-div2", "pll0-div4", > "pll1", "pll1-div2", "pll1-div4", > "pll2", "pll2-div2", "pll2-div4"; > clock-output-names = "cmux0"; > }; > > After this change <&pll0 2> will represent "pll0-div3" and not "pll0-div4". So this needs to be updated to match -- and it confirms that existing device trees will be broken if you base the interpretation on compatible rather than the number of clock-output-names. -Scott -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) @ 2015-04-15 17:14 ` Scott Wood 0 siblings, 0 replies; 12+ messages in thread From: Scott Wood @ 2015-04-15 17:14 UTC (permalink / raw) To: Liberman Igal-B31950; +Cc: devicetree, linuxppc-dev On Wed, 2015-04-15 at 06:07 -0500, Liberman Igal-B31950 wrote: > > > Regards, > Igal Liberman. > > > -----Original Message----- > > From: Wood Scott-B07421 > > Sent: Tuesday, April 14, 2015 11:23 PM > > To: Liberman Igal-B31950 > > Cc: devicetree@vger.kernel.org; linuxppc-dev@lists.ozlabs.org > > Subject: Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) > > > > On Tue, 2015-04-14 at 15:21 -0500, Scott Wood wrote: > > > On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > > > > From: Igal Liberman <Igal.Liberman@freescale.com> > > > > > > > > This patch replaces the following: > > > > https://patchwork.ozlabs.org/patch/427664/ > > > > > > > > This patch is described by the following binding document update: > > > > https://patchwork.ozlabs.org/patch/461150/ > > > > > > > > Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> > > > > --- > > > > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > index 48e0b6e..7e1f074 100644 > > > > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > @@ -49,14 +49,16 @@ global-utilities@e1000 { > > > > reg = <0x800 0x4>; > > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > > clocks = <&sysclk>; > > > > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > > > > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > > > > + "pll0-div4"; > > > > }; > > > > pll1: pll1@820 { > > > > #clock-cells = <1>; > > > > reg = <0x820 0x4>; > > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > > clocks = <&sysclk>; > > > > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > > > > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > > > > + "pll1-div4"; > > > > > > Wait, so if the driver implements the binding you submitted, you'll > > > break compatibility with these older device trees... > > > > > > I think we need to just accept the ugly count-the-clock-names approach > > > and document it. > > > > Is there any current 2.0 clock consumer that references pll-div4? > > > > I looked at T4240 for example, there's a mux node which adds pll-div4 option: > mux0: mux0@0 { > #clock-cells = <0>; > reg = <0x0 0x4>; > compatible = "fsl,qoriq-core-mux-2.0"; > clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, > <&pll1 0>, <&pll1 1>, <&pll1 2>, > <&pll2 0>, <&pll2 1>, <&pll2 2>; > clock-names = "pll0", "pll0-div2", "pll0-div4", > "pll1", "pll1-div2", "pll1-div4", > "pll2", "pll2-div2", "pll2-div4"; > clock-output-names = "cmux0"; > }; > > After this change <&pll0 2> will represent "pll0-div3" and not "pll0-div4". So this needs to be updated to match -- and it confirms that existing device trees will be broken if you base the interpretation on compatible rather than the number of clock-output-names. -Scott ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH] powerpc/dts: Update the core cluster PLL node(s) 2015-04-15 17:14 ` Scott Wood @ 2015-04-16 6:13 ` Igal.Liberman -1 siblings, 0 replies; 12+ messages in thread From: Igal.Liberman @ 2015-04-16 6:13 UTC (permalink / raw) To: Scott Wood; +Cc: devicetree, linuxppc-dev Regards, Igal Liberman. > -----Original Message----- > From: Wood Scott-B07421 > Sent: Wednesday, April 15, 2015 8:15 PM > To: Liberman Igal-B31950 > Cc: devicetree@vger.kernel.org; linuxppc-dev@lists.ozlabs.org > Subject: Re: [PATCH] powerpc/dts: Update the core cluster PLL node(s) > > On Wed, 2015-04-15 at 06:07 -0500, Liberman Igal-B31950 wrote: > > > > > > Regards, > > Igal Liberman. > > > > > -----Original Message----- > > > From: Wood Scott-B07421 > > > Sent: Tuesday, April 14, 2015 11:23 PM > > > To: Liberman Igal-B31950 > > > Cc: devicetree@vger.kernel.org; linuxppc-dev@lists.ozlabs.org > > > Subject: Re: [PATCH] powerpc/dts: Update the core cluster PLL > > > node(s) > > > > > > On Tue, 2015-04-14 at 15:21 -0500, Scott Wood wrote: > > > > On Tue, 2015-04-14 at 12:55 +0300, Igal.Liberman wrote: > > > > > From: Igal Liberman <Igal.Liberman@freescale.com> > > > > > > > > > > This patch replaces the following: > > > > > https://patchwork.ozlabs.org/patch/427664/ > > > > > > > > > > This patch is described by the following binding document update: > > > > > https://patchwork.ozlabs.org/patch/461150/ > > > > > > > > > > Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> > > > > > --- > > > > > arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi | 6 ++++-- > > > > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > > b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > > index 48e0b6e..7e1f074 100644 > > > > > --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi > > > > > @@ -49,14 +49,16 @@ global-utilities@e1000 { > > > > > reg = <0x800 0x4>; > > > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > > > clocks = <&sysclk>; > > > > > - clock-output-names = "pll0", "pll0-div2", "pll0-div4"; > > > > > + clock-output-names = "pll0", "pll0-div2", "pll0-div3", > > > > > + "pll0-div4"; > > > > > }; > > > > > pll1: pll1@820 { > > > > > #clock-cells = <1>; > > > > > reg = <0x820 0x4>; > > > > > compatible = "fsl,qoriq-core-pll-2.0"; > > > > > clocks = <&sysclk>; > > > > > - clock-output-names = "pll1", "pll1-div2", "pll1-div4"; > > > > > + clock-output-names = "pll1", "pll1-div2", "pll1-div3", > > > > > + "pll1-div4"; > > > > > > > > Wait, so if the driver implements the binding you submitted, > > > > you'll break compatibility with these older device trees... > > > > > > > > I think we need to just accept the ugly count-the-clock-names > > > > approach and document it. > > > > > > Is there any current 2.0 clock consumer that references pll-div4? > > > > > > > I looked at T4240 for example, there's a mux node which adds pll-div4 > option: > > mux0: mux0@0 { > > #clock-cells = <0>; > > reg = <0x0 0x4>; > > compatible = "fsl,qoriq-core-mux-2.0"; > > clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, > > <&pll1 0>, <&pll1 1>, <&pll1 2>, > > <&pll2 0>, <&pll2 1>, <&pll2 2>; > > clock-names = "pll0", "pll0-div2", "pll0-div4", > > "pll1", "pll1-div2", "pll1-div4", > > "pll2", "pll2-div2", "pll2-div4"; > > clock-output-names = "cmux0"; > > }; > > > > After this change <&pll0 2> will represent "pll0-div3" and not "pll0-div4". > > So this needs to be updated to match -- and it confirms that existing device > trees will be broken if you base the interpretation on compatible rather than > the number of clock-output-names. > Yes. I'll submit a patch and mention this dependency. > -Scott > Igal. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev ^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: [PATCH] powerpc/dts: Update the core cluster PLL node(s) @ 2015-04-16 6:13 ` Igal.Liberman 0 siblings, 0 replies; 12+ messages in thread From: Igal.Liberman @ 2015-04-16 6:13 UTC (permalink / raw) To: Scott Wood; +Cc: devicetree, linuxppc-dev DQoNClJlZ2FyZHMsDQpJZ2FsIExpYmVybWFuLg0KDQo+IC0tLS0tT3JpZ2luYWwgTWVzc2FnZS0t LS0tDQo+IEZyb206IFdvb2QgU2NvdHQtQjA3NDIxDQo+IFNlbnQ6IFdlZG5lc2RheSwgQXByaWwg MTUsIDIwMTUgODoxNSBQTQ0KPiBUbzogTGliZXJtYW4gSWdhbC1CMzE5NTANCj4gQ2M6IGRldmlj ZXRyZWVAdmdlci5rZXJuZWwub3JnOyBsaW51eHBwYy1kZXZAbGlzdHMub3psYWJzLm9yZw0KPiBT dWJqZWN0OiBSZTogW1BBVENIXSBwb3dlcnBjL2R0czogVXBkYXRlIHRoZSBjb3JlIGNsdXN0ZXIg UExMIG5vZGUocykNCj4gDQo+IE9uIFdlZCwgMjAxNS0wNC0xNSBhdCAwNjowNyAtMDUwMCwgTGli ZXJtYW4gSWdhbC1CMzE5NTAgd3JvdGU6DQo+ID4NCj4gPg0KPiA+IFJlZ2FyZHMsDQo+ID4gSWdh bCBMaWJlcm1hbi4NCj4gPg0KPiA+ID4gLS0tLS1PcmlnaW5hbCBNZXNzYWdlLS0tLS0NCj4gPiA+ IEZyb206IFdvb2QgU2NvdHQtQjA3NDIxDQo+ID4gPiBTZW50OiBUdWVzZGF5LCBBcHJpbCAxNCwg MjAxNSAxMToyMyBQTQ0KPiA+ID4gVG86IExpYmVybWFuIElnYWwtQjMxOTUwDQo+ID4gPiBDYzog ZGV2aWNldHJlZUB2Z2VyLmtlcm5lbC5vcmc7IGxpbnV4cHBjLWRldkBsaXN0cy5vemxhYnMub3Jn DQo+ID4gPiBTdWJqZWN0OiBSZTogW1BBVENIXSBwb3dlcnBjL2R0czogVXBkYXRlIHRoZSBjb3Jl IGNsdXN0ZXIgUExMDQo+ID4gPiBub2RlKHMpDQo+ID4gPg0KPiA+ID4gT24gVHVlLCAyMDE1LTA0 LTE0IGF0IDE1OjIxIC0wNTAwLCBTY290dCBXb29kIHdyb3RlOg0KPiA+ID4gPiBPbiBUdWUsIDIw MTUtMDQtMTQgYXQgMTI6NTUgKzAzMDAsIElnYWwuTGliZXJtYW4gd3JvdGU6DQo+ID4gPiA+ID4g RnJvbTogSWdhbCBMaWJlcm1hbiA8SWdhbC5MaWJlcm1hbkBmcmVlc2NhbGUuY29tPg0KPiA+ID4g PiA+DQo+ID4gPiA+ID4gVGhpcyBwYXRjaCByZXBsYWNlcyB0aGUgZm9sbG93aW5nOg0KPiA+ID4g PiA+IAlodHRwczovL3BhdGNod29yay5vemxhYnMub3JnL3BhdGNoLzQyNzY2NC8NCj4gPiA+ID4g Pg0KPiA+ID4gPiA+IFRoaXMgcGF0Y2ggaXMgZGVzY3JpYmVkIGJ5IHRoZSBmb2xsb3dpbmcgYmlu ZGluZyBkb2N1bWVudCB1cGRhdGU6DQo+ID4gPiA+ID4gCWh0dHBzOi8vcGF0Y2h3b3JrLm96bGFi cy5vcmcvcGF0Y2gvNDYxMTUwLw0KPiA+ID4gPiA+DQo+ID4gPiA+ID4gU2lnbmVkLW9mZi1ieTog SWdhbCBMaWJlcm1hbiA8SWdhbC5MaWJlcm1hbkBmcmVlc2NhbGUuY29tPg0KPiA+ID4gPiA+IC0t LQ0KPiA+ID4gPiA+ICBhcmNoL3Bvd2VycGMvYm9vdC9kdHMvZnNsL3FvcmlxLWNsb2NrZ2VuMi5k dHNpIHwgICAgNiArKysrLS0NCj4gPiA+ID4gPiAgMSBmaWxlIGNoYW5nZWQsIDQgaW5zZXJ0aW9u cygrKSwgMiBkZWxldGlvbnMoLSkNCj4gPiA+ID4gPg0KPiA+ID4gPiA+IGRpZmYgLS1naXQgYS9h cmNoL3Bvd2VycGMvYm9vdC9kdHMvZnNsL3FvcmlxLWNsb2NrZ2VuMi5kdHNpDQo+ID4gPiA+ID4g Yi9hcmNoL3Bvd2VycGMvYm9vdC9kdHMvZnNsL3FvcmlxLWNsb2NrZ2VuMi5kdHNpDQo+ID4gPiA+ ID4gaW5kZXggNDhlMGI2ZS4uN2UxZjA3NCAxMDA2NDQNCj4gPiA+ID4gPiAtLS0gYS9hcmNoL3Bv d2VycGMvYm9vdC9kdHMvZnNsL3FvcmlxLWNsb2NrZ2VuMi5kdHNpDQo+ID4gPiA+ID4gKysrIGIv YXJjaC9wb3dlcnBjL2Jvb3QvZHRzL2ZzbC9xb3JpcS1jbG9ja2dlbjIuZHRzaQ0KPiA+ID4gPiA+ IEBAIC00OSwxNCArNDksMTYgQEAgZ2xvYmFsLXV0aWxpdGllc0BlMTAwMCB7DQo+ID4gPiA+ID4g IAkJcmVnID0gPDB4ODAwIDB4ND47DQo+ID4gPiA+ID4gIAkJY29tcGF0aWJsZSA9ICJmc2wscW9y aXEtY29yZS1wbGwtMi4wIjsNCj4gPiA+ID4gPiAgCQljbG9ja3MgPSA8JnN5c2Nsaz47DQo+ID4g PiA+ID4gLQkJY2xvY2stb3V0cHV0LW5hbWVzID0gInBsbDAiLCAicGxsMC1kaXYyIiwgInBsbDAt ZGl2NCI7DQo+ID4gPiA+ID4gKwkJY2xvY2stb3V0cHV0LW5hbWVzID0gInBsbDAiLCAicGxsMC1k aXYyIiwgInBsbDAtZGl2MyIsDQo+ID4gPiA+ID4gKwkJCQkgICAgICAicGxsMC1kaXY0IjsNCj4g PiA+ID4gPiAgCX07DQo+ID4gPiA+ID4gIAlwbGwxOiBwbGwxQDgyMCB7DQo+ID4gPiA+ID4gIAkJ I2Nsb2NrLWNlbGxzID0gPDE+Ow0KPiA+ID4gPiA+ICAJCXJlZyA9IDwweDgyMCAweDQ+Ow0KPiA+ ID4gPiA+ICAJCWNvbXBhdGlibGUgPSAiZnNsLHFvcmlxLWNvcmUtcGxsLTIuMCI7DQo+ID4gPiA+ ID4gIAkJY2xvY2tzID0gPCZzeXNjbGs+Ow0KPiA+ID4gPiA+IC0JCWNsb2NrLW91dHB1dC1uYW1l cyA9ICJwbGwxIiwgInBsbDEtZGl2MiIsICJwbGwxLWRpdjQiOw0KPiA+ID4gPiA+ICsJCWNsb2Nr LW91dHB1dC1uYW1lcyA9ICJwbGwxIiwgInBsbDEtZGl2MiIsICJwbGwxLWRpdjMiLA0KPiA+ID4g PiA+ICsJCQkJICAgICAgInBsbDEtZGl2NCI7DQo+ID4gPiA+DQo+ID4gPiA+IFdhaXQsIHNvIGlm IHRoZSBkcml2ZXIgaW1wbGVtZW50cyB0aGUgYmluZGluZyB5b3Ugc3VibWl0dGVkLA0KPiA+ID4g PiB5b3UnbGwgYnJlYWsgY29tcGF0aWJpbGl0eSB3aXRoIHRoZXNlIG9sZGVyIGRldmljZSB0cmVl cy4uLg0KPiA+ID4gPg0KPiA+ID4gPiBJIHRoaW5rIHdlIG5lZWQgdG8ganVzdCBhY2NlcHQgdGhl IHVnbHkgY291bnQtdGhlLWNsb2NrLW5hbWVzDQo+ID4gPiA+IGFwcHJvYWNoIGFuZCBkb2N1bWVu dCBpdC4NCj4gPiA+DQo+ID4gPiBJcyB0aGVyZSBhbnkgY3VycmVudCAyLjAgY2xvY2sgY29uc3Vt ZXIgdGhhdCByZWZlcmVuY2VzIHBsbC1kaXY0Pw0KPiA+ID4NCj4gPg0KPiA+IEkgbG9va2VkIGF0 IFQ0MjQwIGZvciBleGFtcGxlLCB0aGVyZSdzIGEgbXV4IG5vZGUgd2hpY2ggYWRkcyBwbGwtZGl2 NA0KPiBvcHRpb246DQo+ID4gbXV4MDogbXV4MEAwIHsNCj4gPiAJI2Nsb2NrLWNlbGxzID0gPDA+ Ow0KPiA+IAlyZWcgPSA8MHgwIDB4ND47DQo+ID4gCWNvbXBhdGlibGUgPSAiZnNsLHFvcmlxLWNv cmUtbXV4LTIuMCI7DQo+ID4gCWNsb2NrcyA9IDwmcGxsMCAwPiwgPCZwbGwwIDE+LCA8JnBsbDAg Mj4sDQo+ID4gCQk8JnBsbDEgMD4sIDwmcGxsMSAxPiwgPCZwbGwxIDI+LA0KPiA+IAkJPCZwbGwy IDA+LCA8JnBsbDIgMT4sIDwmcGxsMiAyPjsNCj4gPiAJY2xvY2stbmFtZXMgPSAicGxsMCIsICJw bGwwLWRpdjIiLCAicGxsMC1kaXY0IiwNCj4gPiAJCSJwbGwxIiwgInBsbDEtZGl2MiIsICJwbGwx LWRpdjQiLA0KPiA+IAkJInBsbDIiLCAicGxsMi1kaXYyIiwgInBsbDItZGl2NCI7DQo+ID4gCWNs b2NrLW91dHB1dC1uYW1lcyA9ICJjbXV4MCI7DQo+ID4gfTsNCj4gPg0KPiA+IEFmdGVyIHRoaXMg Y2hhbmdlIDwmcGxsMCAyPiB3aWxsIHJlcHJlc2VudCAicGxsMC1kaXYzIiBhbmQgbm90ICJwbGww LWRpdjQiLg0KPiANCj4gU28gdGhpcyBuZWVkcyB0byBiZSB1cGRhdGVkIHRvIG1hdGNoIC0tIGFu ZCBpdCBjb25maXJtcyB0aGF0IGV4aXN0aW5nIGRldmljZQ0KPiB0cmVlcyB3aWxsIGJlIGJyb2tl biBpZiB5b3UgYmFzZSB0aGUgaW50ZXJwcmV0YXRpb24gb24gY29tcGF0aWJsZSByYXRoZXIgdGhh bg0KPiB0aGUgbnVtYmVyIG9mIGNsb2NrLW91dHB1dC1uYW1lcy4NCj4gDQoNClllcy4NCkknbGwg c3VibWl0IGEgcGF0Y2ggYW5kIG1lbnRpb24gdGhpcyBkZXBlbmRlbmN5LiANCg0KPiAtU2NvdHQN Cj4gDQoNCklnYWwuDQoNCg== ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2015-04-16 6:13 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-14 9:55 [PATCH] powerpc/dts: Update the core cluster PLL node(s) Igal.Liberman
2015-04-14 9:55 ` Igal.Liberman
2015-04-14 20:21 ` Scott Wood
2015-04-14 20:21 ` Scott Wood
2015-04-14 20:22 ` Scott Wood
2015-04-14 20:22 ` Scott Wood
[not found] ` <1429042950.22867.690.camel-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-04-15 11:07 ` Igal.Liberman-KZfg59tc24xl57MIdRCFDg
2015-04-15 11:07 ` Igal.Liberman
[not found] ` <DM2PR03MB3831BEEDD2C17991818FFA9E6E50-ufbTtyGzTTRJonC5hhDUuuO6mTEJWrR4XA4E9RH9d+qIuWR1G4zioA@public.gmane.org>
2015-04-15 17:14 ` Scott Wood
2015-04-15 17:14 ` Scott Wood
2015-04-16 6:13 ` Igal.Liberman
2015-04-16 6:13 ` Igal.Liberman
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.