From: Rob Herring <robh@kernel.org> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Alan Stern <stern@rowland.harvard.edu>, Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, Rob Herring <robh@kernel.org> Subject: [PATCH 0/5] Marvell PXA1928 USB support Date: Wed, 13 May 2015 17:48:55 -0500 [thread overview] Message-ID: <1431557340-5421-1-git-send-email-robh@kernel.org> (raw) This series adds USB PHYs and EHCI host drivers for the Marvell PXA1928 SOC. The OTG block is based on ChipIdea and works with "chipidea,usb2" compatible driver as is just by adding the PHY driver. Yay! Rob Rob Herring (5): dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings dt-bindings: Add Marvell PXA1928 USB EHCI controller binding phy: Add Marvell USB 2.0 OTG 28nm PHY phy: add Marvell HSIC 28nm PHY usb: add pxa1928 ehci support .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ++ .../devicetree/bindings/usb/ehci-pxa1928.txt | 19 ++ drivers/phy/Kconfig | 20 ++ drivers/phy/Makefile | 2 + drivers/phy/phy-mv-hsic.c | 208 +++++++++++++ drivers/phy/phy-mv-usb2.c | 329 +++++++++++++++++++++ drivers/usb/host/Kconfig | 15 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mv-of.c | 243 +++++++++++++++ 9 files changed, 854 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/usb/ehci-pxa1928.txt create mode 100644 drivers/phy/phy-mv-hsic.c create mode 100644 drivers/phy/phy-mv-usb2.c create mode 100644 drivers/usb/host/ehci-mv-of.c -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> To: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>, Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>, Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org> Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Subject: [PATCH 0/5] Marvell PXA1928 USB support Date: Wed, 13 May 2015 17:48:55 -0500 [thread overview] Message-ID: <1431557340-5421-1-git-send-email-robh@kernel.org> (raw) This series adds USB PHYs and EHCI host drivers for the Marvell PXA1928 SOC. The OTG block is based on ChipIdea and works with "chipidea,usb2" compatible driver as is just by adding the PHY driver. Yay! Rob Rob Herring (5): dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings dt-bindings: Add Marvell PXA1928 USB EHCI controller binding phy: Add Marvell USB 2.0 OTG 28nm PHY phy: add Marvell HSIC 28nm PHY usb: add pxa1928 ehci support .../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ++ .../devicetree/bindings/usb/ehci-pxa1928.txt | 19 ++ drivers/phy/Kconfig | 20 ++ drivers/phy/Makefile | 2 + drivers/phy/phy-mv-hsic.c | 208 +++++++++++++ drivers/phy/phy-mv-usb2.c | 329 +++++++++++++++++++++ drivers/usb/host/Kconfig | 15 +- drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mv-of.c | 243 +++++++++++++++ 9 files changed, 854 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/usb/ehci-pxa1928.txt create mode 100644 drivers/phy/phy-mv-hsic.c create mode 100644 drivers/phy/phy-mv-usb2.c create mode 100644 drivers/usb/host/ehci-mv-of.c -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-05-13 22:49 UTC|newest] Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-05-13 22:48 Rob Herring [this message] 2015-05-13 22:48 ` [PATCH 0/5] Marvell PXA1928 USB support Rob Herring 2015-05-13 22:48 ` [PATCH 1/5] dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings Rob Herring 2015-05-13 22:48 ` Rob Herring 2015-05-13 22:48 ` [PATCH 2/5] dt-bindings: Add Marvell PXA1928 USB EHCI controller binding Rob Herring 2015-05-13 22:48 ` [PATCH 3/5] phy: Add Marvell USB 2.0 OTG 28nm PHY Rob Herring 2015-05-13 22:48 ` Rob Herring 2015-05-21 12:33 ` Kishon Vijay Abraham I 2015-05-21 12:33 ` Kishon Vijay Abraham I 2015-05-13 22:48 ` [PATCH 4/5] phy: add Marvell HSIC " Rob Herring 2015-05-21 12:45 ` Kishon Vijay Abraham I 2015-05-21 12:45 ` Kishon Vijay Abraham I 2015-05-21 12:51 ` Kishon Vijay Abraham I 2015-05-21 12:51 ` Kishon Vijay Abraham I 2015-05-22 19:54 ` Rob Herring 2015-05-22 19:54 ` Rob Herring 2015-05-26 6:06 ` Kishon Vijay Abraham I 2015-05-13 22:49 ` [PATCH 5/5] usb: add pxa1928 ehci support Rob Herring 2015-05-14 8:24 ` Paul Bolle 2015-05-14 10:42 ` Arnd Bergmann 2015-05-14 13:25 ` Rob Herring 2015-05-14 13:25 ` Rob Herring 2015-05-14 10:43 ` Arnd Bergmann 2015-05-14 14:56 ` Alan Stern 2015-05-14 14:56 ` Alan Stern 2015-05-14 16:36 ` Rob Herring 2015-05-14 16:36 ` Rob Herring 2015-05-14 17:06 ` Alan Stern 2015-05-14 17:06 ` Alan Stern 2015-05-14 15:55 ` Alan Stern 2015-05-14 15:55 ` Alan Stern 2015-05-15 9:32 ` Arnd Bergmann 2015-05-15 9:55 ` [PATCH 0/5] Marvell PXA1928 USB support Sebastian Hesselbarth 2015-05-15 9:55 ` Sebastian Hesselbarth 2015-05-15 12:48 ` Rob Herring 2015-05-15 12:48 ` Rob Herring 2015-05-15 14:11 ` Arnd Bergmann 2015-05-15 16:04 ` Rob Herring 2015-05-15 16:04 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1431557340-5421-1-git-send-email-robh@kernel.org \ --to=robh@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=kishon@ti.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=stern@rowland.harvard.edu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.