* [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 12:29 ` Vladimir Zapolskiy 0 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 12:29 UTC (permalink / raw) To: Thierry Reding, Lee Jones, Jingoo Han Cc: Nicolas Ferre, linux-pwm, linux-fbdev Platform PWM backlight data provided by board's device tree should be complete enough to successfully request a pwm device using pwm_get() API. This change fixes a bug, when an arbitrary (first found) PWM is connected to a "pwm-backlight" compatible device, when explicit PWM device reference is not given. Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt already describes "pwms" as a required property, instead of blind selection of a potentially wrong PWM reject legacy PWM device registration request, leave legacy API only for non-dt cases. Based on initial implementation done by Dmitry Eremin-Solenikov. Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> --- The change is based on lee-backlight/for-backlight-next Changes from v1 to v2: * rebased on top of Nicolas' commit 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") Links to previous discussions of the change: * https://patchwork.ozlabs.org/patch/483993/ * https://patchwork.ozlabs.org/patch/398849/ drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index eff379b..ae3c6b6 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) } pb->pwm = devm_pwm_get(&pdev->dev, NULL); - if (IS_ERR(pb->pwm)) { - ret = PTR_ERR(pb->pwm); - if (ret == -EPROBE_DEFER) - goto err_alloc; - + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER + && !pdev->dev.of_node) { dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); pb->legacy = true; pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); - if (IS_ERR(pb->pwm)) { - dev_err(&pdev->dev, "unable to request legacy PWM\n"); - ret = PTR_ERR(pb->pwm); - goto err_alloc; - } + } + + if (IS_ERR(pb->pwm)) { + ret = PTR_ERR(pb->pwm); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "unable to request PWM\n"); + goto err_alloc; } dev_dbg(&pdev->dev, "got pwm for backlight\n"); -- 2.5.0 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 12:29 ` Vladimir Zapolskiy 0 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 12:29 UTC (permalink / raw) To: Thierry Reding, Lee Jones, Jingoo Han Cc: Nicolas Ferre, linux-pwm, linux-fbdev Platform PWM backlight data provided by board's device tree should be complete enough to successfully request a pwm device using pwm_get() API. This change fixes a bug, when an arbitrary (first found) PWM is connected to a "pwm-backlight" compatible device, when explicit PWM device reference is not given. Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt already describes "pwms" as a required property, instead of blind selection of a potentially wrong PWM reject legacy PWM device registration request, leave legacy API only for non-dt cases. Based on initial implementation done by Dmitry Eremin-Solenikov. Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> --- The change is based on lee-backlight/for-backlight-next Changes from v1 to v2: * rebased on top of Nicolas' commit 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") Links to previous discussions of the change: * https://patchwork.ozlabs.org/patch/483993/ * https://patchwork.ozlabs.org/patch/398849/ drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index eff379b..ae3c6b6 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) } pb->pwm = devm_pwm_get(&pdev->dev, NULL); - if (IS_ERR(pb->pwm)) { - ret = PTR_ERR(pb->pwm); - if (ret = -EPROBE_DEFER) - goto err_alloc; - + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER + && !pdev->dev.of_node) { dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); pb->legacy = true; pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); - if (IS_ERR(pb->pwm)) { - dev_err(&pdev->dev, "unable to request legacy PWM\n"); - ret = PTR_ERR(pb->pwm); - goto err_alloc; - } + } + + if (IS_ERR(pb->pwm)) { + ret = PTR_ERR(pb->pwm); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "unable to request PWM\n"); + goto err_alloc; } dev_dbg(&pdev->dev, "got pwm for backlight\n"); -- 2.5.0 ^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 12:29 ` Vladimir Zapolskiy @ 2015-10-12 13:16 ` Nicolas Ferre -1 siblings, 0 replies; 26+ messages in thread From: Nicolas Ferre @ 2015-10-12 13:16 UTC (permalink / raw) To: Vladimir Zapolskiy, Thierry Reding, Lee Jones, Jingoo Han, Boris BREZILLON, Robert Jarzmik Cc: linux-pwm, linux-fbdev Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : > Platform PWM backlight data provided by board's device tree should be > complete enough to successfully request a pwm device using pwm_get() > API. This change fixes a bug, when an arbitrary (first found) PWM is > connected to a "pwm-backlight" compatible device, when explicit PWM > device reference is not given. > > Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > already describes "pwms" as a required property, instead of blind > selection of a potentially wrong PWM reject legacy PWM device > registration request, leave legacy API only for non-dt cases. > > Based on initial implementation done by Dmitry Eremin-Solenikov. > > Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > Acked-by: Thierry Reding <thierry.reding@gmail.com> > Acked-by: Lee Jones <lee.jones@linaro.org> It seems good to me: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> (Adding some people to the Cc: list). > --- > The change is based on lee-backlight/for-backlight-next > > Changes from v1 to v2: > * rebased on top of Nicolas' commit > 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > > Links to previous discussions of the change: > * https://patchwork.ozlabs.org/patch/483993/ > * https://patchwork.ozlabs.org/patch/398849/ > > drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > 1 file changed, 9 insertions(+), 10 deletions(-) > > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > index eff379b..ae3c6b6 100644 > --- a/drivers/video/backlight/pwm_bl.c > +++ b/drivers/video/backlight/pwm_bl.c > @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > } > > pb->pwm = devm_pwm_get(&pdev->dev, NULL); > - if (IS_ERR(pb->pwm)) { > - ret = PTR_ERR(pb->pwm); > - if (ret == -EPROBE_DEFER) > - goto err_alloc; > - > + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > + && !pdev->dev.of_node) { > dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > pb->legacy = true; > pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > - if (IS_ERR(pb->pwm)) { > - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > - ret = PTR_ERR(pb->pwm); > - goto err_alloc; > - } > + } > + > + if (IS_ERR(pb->pwm)) { > + ret = PTR_ERR(pb->pwm); > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, "unable to request PWM\n"); > + goto err_alloc; > } > > dev_dbg(&pdev->dev, "got pwm for backlight\n"); > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 13:16 ` Nicolas Ferre 0 siblings, 0 replies; 26+ messages in thread From: Nicolas Ferre @ 2015-10-12 13:16 UTC (permalink / raw) To: Vladimir Zapolskiy, Thierry Reding, Lee Jones, Jingoo Han, Boris BREZILLON, Robert Jarzmik Cc: linux-pwm, linux-fbdev Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : > Platform PWM backlight data provided by board's device tree should be > complete enough to successfully request a pwm device using pwm_get() > API. This change fixes a bug, when an arbitrary (first found) PWM is > connected to a "pwm-backlight" compatible device, when explicit PWM > device reference is not given. > > Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > already describes "pwms" as a required property, instead of blind > selection of a potentially wrong PWM reject legacy PWM device > registration request, leave legacy API only for non-dt cases. > > Based on initial implementation done by Dmitry Eremin-Solenikov. > > Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > Acked-by: Thierry Reding <thierry.reding@gmail.com> > Acked-by: Lee Jones <lee.jones@linaro.org> It seems good to me: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> (Adding some people to the Cc: list). > --- > The change is based on lee-backlight/for-backlight-next > > Changes from v1 to v2: > * rebased on top of Nicolas' commit > 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > > Links to previous discussions of the change: > * https://patchwork.ozlabs.org/patch/483993/ > * https://patchwork.ozlabs.org/patch/398849/ > > drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > 1 file changed, 9 insertions(+), 10 deletions(-) > > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > index eff379b..ae3c6b6 100644 > --- a/drivers/video/backlight/pwm_bl.c > +++ b/drivers/video/backlight/pwm_bl.c > @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > } > > pb->pwm = devm_pwm_get(&pdev->dev, NULL); > - if (IS_ERR(pb->pwm)) { > - ret = PTR_ERR(pb->pwm); > - if (ret = -EPROBE_DEFER) > - goto err_alloc; > - > + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > + && !pdev->dev.of_node) { > dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > pb->legacy = true; > pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > - if (IS_ERR(pb->pwm)) { > - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > - ret = PTR_ERR(pb->pwm); > - goto err_alloc; > - } > + } > + > + if (IS_ERR(pb->pwm)) { > + ret = PTR_ERR(pb->pwm); > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, "unable to request PWM\n"); > + goto err_alloc; > } > > dev_dbg(&pdev->dev, "got pwm for backlight\n"); > -- Nicolas Ferre ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 13:16 ` Nicolas Ferre @ 2015-10-12 13:30 ` Boris Brezillon -1 siblings, 0 replies; 26+ messages in thread From: Boris Brezillon @ 2015-10-12 13:30 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev Hi Vladimir, On Mon, 12 Oct 2015 15:16:44 +0200 Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : > > Platform PWM backlight data provided by board's device tree should be > > complete enough to successfully request a pwm device using pwm_get() > > API. This change fixes a bug, when an arbitrary (first found) PWM is > > connected to a "pwm-backlight" compatible device, when explicit PWM > > device reference is not given. > > > > Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > > already describes "pwms" as a required property, instead of blind > > selection of a potentially wrong PWM reject legacy PWM device > > registration request, leave legacy API only for non-dt cases. > > > > Based on initial implementation done by Dmitry Eremin-Solenikov. > > > > Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > > Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > > Acked-by: Thierry Reding <thierry.reding@gmail.com> > > Acked-by: Lee Jones <lee.jones@linaro.org> > > It seems good to me: > Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > > (Adding some people to the Cc: list). > > > > --- > > The change is based on lee-backlight/for-backlight-next > > > > Changes from v1 to v2: > > * rebased on top of Nicolas' commit > > 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > > > > Links to previous discussions of the change: > > * https://patchwork.ozlabs.org/patch/483993/ > > * https://patchwork.ozlabs.org/patch/398849/ > > > > drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > > 1 file changed, 9 insertions(+), 10 deletions(-) > > > > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > > index eff379b..ae3c6b6 100644 > > --- a/drivers/video/backlight/pwm_bl.c > > +++ b/drivers/video/backlight/pwm_bl.c > > @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > > } > > > > pb->pwm = devm_pwm_get(&pdev->dev, NULL); > > - if (IS_ERR(pb->pwm)) { > > - ret = PTR_ERR(pb->pwm); > > - if (ret == -EPROBE_DEFER) > > - goto err_alloc; > > - > > + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > > + && !pdev->dev.of_node) { > > dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > > pb->legacy = true; > > pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > > - if (IS_ERR(pb->pwm)) { > > - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > > - ret = PTR_ERR(pb->pwm); > > - goto err_alloc; > > - } > > + } > > + > > + if (IS_ERR(pb->pwm)) { > > + ret = PTR_ERR(pb->pwm); > > + if (ret != -EPROBE_DEFER) > > + dev_err(&pdev->dev, "unable to request PWM\n"); > > + goto err_alloc; > > } > > > > dev_dbg(&pdev->dev, "got pwm for backlight\n"); > > > > I still think it would be cleaner to do what Thierry proposed here [1]. IMO, embedding the complexity of different error cases depending on the way PWM devices were defined (OF, pdata, ...) is rather risky and make the code even more complicated. Best Regards, Boris [1]https://lkml.org/lkml/2015/10/5/319 -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 13:30 ` Boris Brezillon 0 siblings, 0 replies; 26+ messages in thread From: Boris Brezillon @ 2015-10-12 13:30 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev Hi Vladimir, On Mon, 12 Oct 2015 15:16:44 +0200 Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : > > Platform PWM backlight data provided by board's device tree should be > > complete enough to successfully request a pwm device using pwm_get() > > API. This change fixes a bug, when an arbitrary (first found) PWM is > > connected to a "pwm-backlight" compatible device, when explicit PWM > > device reference is not given. > > > > Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > > already describes "pwms" as a required property, instead of blind > > selection of a potentially wrong PWM reject legacy PWM device > > registration request, leave legacy API only for non-dt cases. > > > > Based on initial implementation done by Dmitry Eremin-Solenikov. > > > > Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > > Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > > Acked-by: Thierry Reding <thierry.reding@gmail.com> > > Acked-by: Lee Jones <lee.jones@linaro.org> > > It seems good to me: > Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > > (Adding some people to the Cc: list). > > > > --- > > The change is based on lee-backlight/for-backlight-next > > > > Changes from v1 to v2: > > * rebased on top of Nicolas' commit > > 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > > > > Links to previous discussions of the change: > > * https://patchwork.ozlabs.org/patch/483993/ > > * https://patchwork.ozlabs.org/patch/398849/ > > > > drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > > 1 file changed, 9 insertions(+), 10 deletions(-) > > > > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > > index eff379b..ae3c6b6 100644 > > --- a/drivers/video/backlight/pwm_bl.c > > +++ b/drivers/video/backlight/pwm_bl.c > > @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > > } > > > > pb->pwm = devm_pwm_get(&pdev->dev, NULL); > > - if (IS_ERR(pb->pwm)) { > > - ret = PTR_ERR(pb->pwm); > > - if (ret = -EPROBE_DEFER) > > - goto err_alloc; > > - > > + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > > + && !pdev->dev.of_node) { > > dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > > pb->legacy = true; > > pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > > - if (IS_ERR(pb->pwm)) { > > - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > > - ret = PTR_ERR(pb->pwm); > > - goto err_alloc; > > - } > > + } > > + > > + if (IS_ERR(pb->pwm)) { > > + ret = PTR_ERR(pb->pwm); > > + if (ret != -EPROBE_DEFER) > > + dev_err(&pdev->dev, "unable to request PWM\n"); > > + goto err_alloc; > > } > > > > dev_dbg(&pdev->dev, "got pwm for backlight\n"); > > > > I still think it would be cleaner to do what Thierry proposed here [1]. IMO, embedding the complexity of different error cases depending on the way PWM devices were defined (OF, pdata, ...) is rather risky and make the code even more complicated. Best Regards, Boris [1]https://lkml.org/lkml/2015/10/5/319 -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 13:30 ` Boris Brezillon @ 2015-10-12 13:54 ` Vladimir Zapolskiy -1 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 13:54 UTC (permalink / raw) To: Boris Brezillon Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev Hi Boris, On 12.10.2015 16:30, Boris Brezillon wrote: > Hi Vladimir, > > On Mon, 12 Oct 2015 15:16:44 +0200 > Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > >> Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : >>> Platform PWM backlight data provided by board's device tree should be >>> complete enough to successfully request a pwm device using pwm_get() >>> API. This change fixes a bug, when an arbitrary (first found) PWM is >>> connected to a "pwm-backlight" compatible device, when explicit PWM >>> device reference is not given. >>> >>> Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt >>> already describes "pwms" as a required property, instead of blind >>> selection of a potentially wrong PWM reject legacy PWM device >>> registration request, leave legacy API only for non-dt cases. >>> >>> Based on initial implementation done by Dmitry Eremin-Solenikov. >>> >>> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> >>> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> >>> Acked-by: Thierry Reding <thierry.reding@gmail.com> >>> Acked-by: Lee Jones <lee.jones@linaro.org> >> >> It seems good to me: >> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> >> >> (Adding some people to the Cc: list). >> >> >>> --- >>> The change is based on lee-backlight/for-backlight-next >>> >>> Changes from v1 to v2: >>> * rebased on top of Nicolas' commit >>> 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") >>> >>> Links to previous discussions of the change: >>> * https://patchwork.ozlabs.org/patch/483993/ >>> * https://patchwork.ozlabs.org/patch/398849/ >>> >>> drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- >>> 1 file changed, 9 insertions(+), 10 deletions(-) >>> >>> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c >>> index eff379b..ae3c6b6 100644 >>> --- a/drivers/video/backlight/pwm_bl.c >>> +++ b/drivers/video/backlight/pwm_bl.c >>> @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) >>> } >>> >>> pb->pwm = devm_pwm_get(&pdev->dev, NULL); >>> - if (IS_ERR(pb->pwm)) { >>> - ret = PTR_ERR(pb->pwm); >>> - if (ret == -EPROBE_DEFER) >>> - goto err_alloc; >>> - >>> + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER >>> + && !pdev->dev.of_node) { >>> dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); >>> pb->legacy = true; >>> pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); >>> - if (IS_ERR(pb->pwm)) { >>> - dev_err(&pdev->dev, "unable to request legacy PWM\n"); >>> - ret = PTR_ERR(pb->pwm); >>> - goto err_alloc; >>> - } >>> + } >>> + >>> + if (IS_ERR(pb->pwm)) { >>> + ret = PTR_ERR(pb->pwm); >>> + if (ret != -EPROBE_DEFER) >>> + dev_err(&pdev->dev, "unable to request PWM\n"); >>> + goto err_alloc; >>> } >>> >>> dev_dbg(&pdev->dev, "got pwm for backlight\n"); >>> >> >> > > I still think it would be cleaner to do what Thierry proposed here [1]. > IMO, embedding the complexity of different error cases depending on the > way PWM devices were defined (OF, pdata, ...) is rather risky and > make the code even more complicated. please correct me if I'm wrong, I suppose Thierry's change fixes Nicolas' commit 68feaca0b13 only, and the intention of my change is to fix an absolutely unrelated problem, see the commit message. So, since still there is a remained chance of getting -EPROBE_DEFER from pwm_get(), e.g. from of_pwm_get() or failed pwmchip_find_by_name() or pwm->chip->ops->request() I don't see how Thierry's change alone may help me to overcome the problem I'm trying to solve here. > Best Regards, > > Boris > > [1]https://lkml.org/lkml/2015/10/5/319 > > -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 13:54 ` Vladimir Zapolskiy 0 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 13:54 UTC (permalink / raw) To: Boris Brezillon Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev Hi Boris, On 12.10.2015 16:30, Boris Brezillon wrote: > Hi Vladimir, > > On Mon, 12 Oct 2015 15:16:44 +0200 > Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > >> Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : >>> Platform PWM backlight data provided by board's device tree should be >>> complete enough to successfully request a pwm device using pwm_get() >>> API. This change fixes a bug, when an arbitrary (first found) PWM is >>> connected to a "pwm-backlight" compatible device, when explicit PWM >>> device reference is not given. >>> >>> Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt >>> already describes "pwms" as a required property, instead of blind >>> selection of a potentially wrong PWM reject legacy PWM device >>> registration request, leave legacy API only for non-dt cases. >>> >>> Based on initial implementation done by Dmitry Eremin-Solenikov. >>> >>> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> >>> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> >>> Acked-by: Thierry Reding <thierry.reding@gmail.com> >>> Acked-by: Lee Jones <lee.jones@linaro.org> >> >> It seems good to me: >> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> >> >> (Adding some people to the Cc: list). >> >> >>> --- >>> The change is based on lee-backlight/for-backlight-next >>> >>> Changes from v1 to v2: >>> * rebased on top of Nicolas' commit >>> 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") >>> >>> Links to previous discussions of the change: >>> * https://patchwork.ozlabs.org/patch/483993/ >>> * https://patchwork.ozlabs.org/patch/398849/ >>> >>> drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- >>> 1 file changed, 9 insertions(+), 10 deletions(-) >>> >>> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c >>> index eff379b..ae3c6b6 100644 >>> --- a/drivers/video/backlight/pwm_bl.c >>> +++ b/drivers/video/backlight/pwm_bl.c >>> @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) >>> } >>> >>> pb->pwm = devm_pwm_get(&pdev->dev, NULL); >>> - if (IS_ERR(pb->pwm)) { >>> - ret = PTR_ERR(pb->pwm); >>> - if (ret = -EPROBE_DEFER) >>> - goto err_alloc; >>> - >>> + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER >>> + && !pdev->dev.of_node) { >>> dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); >>> pb->legacy = true; >>> pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); >>> - if (IS_ERR(pb->pwm)) { >>> - dev_err(&pdev->dev, "unable to request legacy PWM\n"); >>> - ret = PTR_ERR(pb->pwm); >>> - goto err_alloc; >>> - } >>> + } >>> + >>> + if (IS_ERR(pb->pwm)) { >>> + ret = PTR_ERR(pb->pwm); >>> + if (ret != -EPROBE_DEFER) >>> + dev_err(&pdev->dev, "unable to request PWM\n"); >>> + goto err_alloc; >>> } >>> >>> dev_dbg(&pdev->dev, "got pwm for backlight\n"); >>> >> >> > > I still think it would be cleaner to do what Thierry proposed here [1]. > IMO, embedding the complexity of different error cases depending on the > way PWM devices were defined (OF, pdata, ...) is rather risky and > make the code even more complicated. please correct me if I'm wrong, I suppose Thierry's change fixes Nicolas' commit 68feaca0b13 only, and the intention of my change is to fix an absolutely unrelated problem, see the commit message. So, since still there is a remained chance of getting -EPROBE_DEFER from pwm_get(), e.g. from of_pwm_get() or failed pwmchip_find_by_name() or pwm->chip->ops->request() I don't see how Thierry's change alone may help me to overcome the problem I'm trying to solve here. > Best Regards, > > Boris > > [1]https://lkml.org/lkml/2015/10/5/319 > > -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 13:54 ` Vladimir Zapolskiy @ 2015-10-12 14:06 ` Boris Brezillon -1 siblings, 0 replies; 26+ messages in thread From: Boris Brezillon @ 2015-10-12 14:06 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev On Mon, 12 Oct 2015 16:54:39 +0300 Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > Hi Boris, > > On 12.10.2015 16:30, Boris Brezillon wrote: > > Hi Vladimir, > > > > On Mon, 12 Oct 2015 15:16:44 +0200 > > Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > > > >> Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : > >>> Platform PWM backlight data provided by board's device tree should be > >>> complete enough to successfully request a pwm device using pwm_get() > >>> API. This change fixes a bug, when an arbitrary (first found) PWM is > >>> connected to a "pwm-backlight" compatible device, when explicit PWM > >>> device reference is not given. > >>> > >>> Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > >>> already describes "pwms" as a required property, instead of blind > >>> selection of a potentially wrong PWM reject legacy PWM device > >>> registration request, leave legacy API only for non-dt cases. > >>> > >>> Based on initial implementation done by Dmitry Eremin-Solenikov. > >>> > >>> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > >>> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > >>> Acked-by: Thierry Reding <thierry.reding@gmail.com> > >>> Acked-by: Lee Jones <lee.jones@linaro.org> > >> > >> It seems good to me: > >> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > >> > >> (Adding some people to the Cc: list). > >> > >> > >>> --- > >>> The change is based on lee-backlight/for-backlight-next > >>> > >>> Changes from v1 to v2: > >>> * rebased on top of Nicolas' commit > >>> 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > >>> > >>> Links to previous discussions of the change: > >>> * https://patchwork.ozlabs.org/patch/483993/ > >>> * https://patchwork.ozlabs.org/patch/398849/ > >>> > >>> drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > >>> 1 file changed, 9 insertions(+), 10 deletions(-) > >>> > >>> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > >>> index eff379b..ae3c6b6 100644 > >>> --- a/drivers/video/backlight/pwm_bl.c > >>> +++ b/drivers/video/backlight/pwm_bl.c > >>> @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > >>> } > >>> > >>> pb->pwm = devm_pwm_get(&pdev->dev, NULL); > >>> - if (IS_ERR(pb->pwm)) { > >>> - ret = PTR_ERR(pb->pwm); > >>> - if (ret == -EPROBE_DEFER) > >>> - goto err_alloc; > >>> - > >>> + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > >>> + && !pdev->dev.of_node) { > >>> dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > >>> pb->legacy = true; > >>> pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > >>> - if (IS_ERR(pb->pwm)) { > >>> - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > >>> - ret = PTR_ERR(pb->pwm); > >>> - goto err_alloc; > >>> - } > >>> + } > >>> + > >>> + if (IS_ERR(pb->pwm)) { > >>> + ret = PTR_ERR(pb->pwm); > >>> + if (ret != -EPROBE_DEFER) > >>> + dev_err(&pdev->dev, "unable to request PWM\n"); > >>> + goto err_alloc; > >>> } > >>> > >>> dev_dbg(&pdev->dev, "got pwm for backlight\n"); > >>> > >> > >> > > > > I still think it would be cleaner to do what Thierry proposed here [1]. > > IMO, embedding the complexity of different error cases depending on the > > way PWM devices were defined (OF, pdata, ...) is rather risky and > > make the code even more complicated. > > please correct me if I'm wrong, I suppose Thierry's change fixes > Nicolas' commit 68feaca0b13 only, and the intention of my change is to > fix an absolutely unrelated problem, see the commit message. > > So, since still there is a remained chance of getting -EPROBE_DEFER from > pwm_get(), e.g. from of_pwm_get() or failed pwmchip_find_by_name() or > pwm->chip->ops->request() I don't see how Thierry's change alone may > help me to overcome the problem I'm trying to solve here. The only valid case where EPROBE_DEFER should be returned is when we have a device that is not ready to be used yet (but we're sure that we have this device declared, using either the PWM lookup table or the DT definition in the PWM subsystem case). Thierry's patch makes sure that EPROBE_DEFER is not returned when the PWM device definition is not found using in the PWM lookup tables or the DT definition, and in this case the pwm_bl code will fallback to the legacy PWM API, which AFAICT is what you're trying to solve. Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 14:06 ` Boris Brezillon 0 siblings, 0 replies; 26+ messages in thread From: Boris Brezillon @ 2015-10-12 14:06 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev On Mon, 12 Oct 2015 16:54:39 +0300 Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > Hi Boris, > > On 12.10.2015 16:30, Boris Brezillon wrote: > > Hi Vladimir, > > > > On Mon, 12 Oct 2015 15:16:44 +0200 > > Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > > > >> Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : > >>> Platform PWM backlight data provided by board's device tree should be > >>> complete enough to successfully request a pwm device using pwm_get() > >>> API. This change fixes a bug, when an arbitrary (first found) PWM is > >>> connected to a "pwm-backlight" compatible device, when explicit PWM > >>> device reference is not given. > >>> > >>> Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > >>> already describes "pwms" as a required property, instead of blind > >>> selection of a potentially wrong PWM reject legacy PWM device > >>> registration request, leave legacy API only for non-dt cases. > >>> > >>> Based on initial implementation done by Dmitry Eremin-Solenikov. > >>> > >>> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > >>> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > >>> Acked-by: Thierry Reding <thierry.reding@gmail.com> > >>> Acked-by: Lee Jones <lee.jones@linaro.org> > >> > >> It seems good to me: > >> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > >> > >> (Adding some people to the Cc: list). > >> > >> > >>> --- > >>> The change is based on lee-backlight/for-backlight-next > >>> > >>> Changes from v1 to v2: > >>> * rebased on top of Nicolas' commit > >>> 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > >>> > >>> Links to previous discussions of the change: > >>> * https://patchwork.ozlabs.org/patch/483993/ > >>> * https://patchwork.ozlabs.org/patch/398849/ > >>> > >>> drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > >>> 1 file changed, 9 insertions(+), 10 deletions(-) > >>> > >>> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > >>> index eff379b..ae3c6b6 100644 > >>> --- a/drivers/video/backlight/pwm_bl.c > >>> +++ b/drivers/video/backlight/pwm_bl.c > >>> @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > >>> } > >>> > >>> pb->pwm = devm_pwm_get(&pdev->dev, NULL); > >>> - if (IS_ERR(pb->pwm)) { > >>> - ret = PTR_ERR(pb->pwm); > >>> - if (ret = -EPROBE_DEFER) > >>> - goto err_alloc; > >>> - > >>> + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > >>> + && !pdev->dev.of_node) { > >>> dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > >>> pb->legacy = true; > >>> pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > >>> - if (IS_ERR(pb->pwm)) { > >>> - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > >>> - ret = PTR_ERR(pb->pwm); > >>> - goto err_alloc; > >>> - } > >>> + } > >>> + > >>> + if (IS_ERR(pb->pwm)) { > >>> + ret = PTR_ERR(pb->pwm); > >>> + if (ret != -EPROBE_DEFER) > >>> + dev_err(&pdev->dev, "unable to request PWM\n"); > >>> + goto err_alloc; > >>> } > >>> > >>> dev_dbg(&pdev->dev, "got pwm for backlight\n"); > >>> > >> > >> > > > > I still think it would be cleaner to do what Thierry proposed here [1]. > > IMO, embedding the complexity of different error cases depending on the > > way PWM devices were defined (OF, pdata, ...) is rather risky and > > make the code even more complicated. > > please correct me if I'm wrong, I suppose Thierry's change fixes > Nicolas' commit 68feaca0b13 only, and the intention of my change is to > fix an absolutely unrelated problem, see the commit message. > > So, since still there is a remained chance of getting -EPROBE_DEFER from > pwm_get(), e.g. from of_pwm_get() or failed pwmchip_find_by_name() or > pwm->chip->ops->request() I don't see how Thierry's change alone may > help me to overcome the problem I'm trying to solve here. The only valid case where EPROBE_DEFER should be returned is when we have a device that is not ready to be used yet (but we're sure that we have this device declared, using either the PWM lookup table or the DT definition in the PWM subsystem case). Thierry's patch makes sure that EPROBE_DEFER is not returned when the PWM device definition is not found using in the PWM lookup tables or the DT definition, and in this case the pwm_bl code will fallback to the legacy PWM API, which AFAICT is what you're trying to solve. Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 14:06 ` Boris Brezillon @ 2015-10-12 14:19 ` Vladimir Zapolskiy -1 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 14:19 UTC (permalink / raw) To: Boris Brezillon Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev On 12.10.2015 17:06, Boris Brezillon wrote: > On Mon, 12 Oct 2015 16:54:39 +0300 > Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > >> Hi Boris, >> >> On 12.10.2015 16:30, Boris Brezillon wrote: >>> Hi Vladimir, >>> >>> On Mon, 12 Oct 2015 15:16:44 +0200 >>> Nicolas Ferre <nicolas.ferre@atmel.com> wrote: >>> >>>> Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : >>>>> Platform PWM backlight data provided by board's device tree should be >>>>> complete enough to successfully request a pwm device using pwm_get() >>>>> API. This change fixes a bug, when an arbitrary (first found) PWM is >>>>> connected to a "pwm-backlight" compatible device, when explicit PWM >>>>> device reference is not given. >>>>> >>>>> Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt >>>>> already describes "pwms" as a required property, instead of blind >>>>> selection of a potentially wrong PWM reject legacy PWM device >>>>> registration request, leave legacy API only for non-dt cases. >>>>> >>>>> Based on initial implementation done by Dmitry Eremin-Solenikov. >>>>> >>>>> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> >>>>> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> >>>>> Acked-by: Thierry Reding <thierry.reding@gmail.com> >>>>> Acked-by: Lee Jones <lee.jones@linaro.org> >>>> >>>> It seems good to me: >>>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> >>>> >>>> (Adding some people to the Cc: list). >>>> >>>> >>>>> --- >>>>> The change is based on lee-backlight/for-backlight-next >>>>> >>>>> Changes from v1 to v2: >>>>> * rebased on top of Nicolas' commit >>>>> 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") >>>>> >>>>> Links to previous discussions of the change: >>>>> * https://patchwork.ozlabs.org/patch/483993/ >>>>> * https://patchwork.ozlabs.org/patch/398849/ >>>>> >>>>> drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- >>>>> 1 file changed, 9 insertions(+), 10 deletions(-) >>>>> >>>>> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c >>>>> index eff379b..ae3c6b6 100644 >>>>> --- a/drivers/video/backlight/pwm_bl.c >>>>> +++ b/drivers/video/backlight/pwm_bl.c >>>>> @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) >>>>> } >>>>> >>>>> pb->pwm = devm_pwm_get(&pdev->dev, NULL); >>>>> - if (IS_ERR(pb->pwm)) { >>>>> - ret = PTR_ERR(pb->pwm); >>>>> - if (ret == -EPROBE_DEFER) >>>>> - goto err_alloc; >>>>> - >>>>> + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER >>>>> + && !pdev->dev.of_node) { >>>>> dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); >>>>> pb->legacy = true; >>>>> pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); >>>>> - if (IS_ERR(pb->pwm)) { >>>>> - dev_err(&pdev->dev, "unable to request legacy PWM\n"); >>>>> - ret = PTR_ERR(pb->pwm); >>>>> - goto err_alloc; >>>>> - } >>>>> + } >>>>> + >>>>> + if (IS_ERR(pb->pwm)) { >>>>> + ret = PTR_ERR(pb->pwm); >>>>> + if (ret != -EPROBE_DEFER) >>>>> + dev_err(&pdev->dev, "unable to request PWM\n"); >>>>> + goto err_alloc; >>>>> } >>>>> >>>>> dev_dbg(&pdev->dev, "got pwm for backlight\n"); >>>>> >>>> >>>> >>> >>> I still think it would be cleaner to do what Thierry proposed here [1]. >>> IMO, embedding the complexity of different error cases depending on the >>> way PWM devices were defined (OF, pdata, ...) is rather risky and >>> make the code even more complicated. >> >> please correct me if I'm wrong, I suppose Thierry's change fixes >> Nicolas' commit 68feaca0b13 only, and the intention of my change is to >> fix an absolutely unrelated problem, see the commit message. >> >> So, since still there is a remained chance of getting -EPROBE_DEFER from >> pwm_get(), e.g. from of_pwm_get() or failed pwmchip_find_by_name() or >> pwm->chip->ops->request() I don't see how Thierry's change alone may >> help me to overcome the problem I'm trying to solve here. > > The only valid case where EPROBE_DEFER should be returned is when we > have a device that is not ready to be used yet (but we're sure that we > have this device declared, using either the PWM lookup table or the DT > definition in the PWM subsystem case). That's fine, and it is reflected in my change. > Thierry's patch makes sure that EPROBE_DEFER is not returned when the > PWM device definition is not found using in the PWM lookup tables or > the DT definition, This is okay, but I'm interested in proper handling of cases other than EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance and I'm attempting to avoid interfering with it here :) > and in this case the pwm_bl code will fallback to > the legacy PWM API, which AFAICT is what you're trying to solve. Fallback must happen exclusively under (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. Before EPROBE_DEFER appeared on the scene the condition was (IS_ERR(pb->pwm) && !pdev->dev.of_node). So, the question is if my change requires any updates or not from your point of view. -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 14:19 ` Vladimir Zapolskiy 0 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 14:19 UTC (permalink / raw) To: Boris Brezillon Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev On 12.10.2015 17:06, Boris Brezillon wrote: > On Mon, 12 Oct 2015 16:54:39 +0300 > Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > >> Hi Boris, >> >> On 12.10.2015 16:30, Boris Brezillon wrote: >>> Hi Vladimir, >>> >>> On Mon, 12 Oct 2015 15:16:44 +0200 >>> Nicolas Ferre <nicolas.ferre@atmel.com> wrote: >>> >>>> Le 12/10/2015 14:29, Vladimir Zapolskiy a écrit : >>>>> Platform PWM backlight data provided by board's device tree should be >>>>> complete enough to successfully request a pwm device using pwm_get() >>>>> API. This change fixes a bug, when an arbitrary (first found) PWM is >>>>> connected to a "pwm-backlight" compatible device, when explicit PWM >>>>> device reference is not given. >>>>> >>>>> Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt >>>>> already describes "pwms" as a required property, instead of blind >>>>> selection of a potentially wrong PWM reject legacy PWM device >>>>> registration request, leave legacy API only for non-dt cases. >>>>> >>>>> Based on initial implementation done by Dmitry Eremin-Solenikov. >>>>> >>>>> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> >>>>> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> >>>>> Acked-by: Thierry Reding <thierry.reding@gmail.com> >>>>> Acked-by: Lee Jones <lee.jones@linaro.org> >>>> >>>> It seems good to me: >>>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> >>>> >>>> (Adding some people to the Cc: list). >>>> >>>> >>>>> --- >>>>> The change is based on lee-backlight/for-backlight-next >>>>> >>>>> Changes from v1 to v2: >>>>> * rebased on top of Nicolas' commit >>>>> 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") >>>>> >>>>> Links to previous discussions of the change: >>>>> * https://patchwork.ozlabs.org/patch/483993/ >>>>> * https://patchwork.ozlabs.org/patch/398849/ >>>>> >>>>> drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- >>>>> 1 file changed, 9 insertions(+), 10 deletions(-) >>>>> >>>>> diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c >>>>> index eff379b..ae3c6b6 100644 >>>>> --- a/drivers/video/backlight/pwm_bl.c >>>>> +++ b/drivers/video/backlight/pwm_bl.c >>>>> @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) >>>>> } >>>>> >>>>> pb->pwm = devm_pwm_get(&pdev->dev, NULL); >>>>> - if (IS_ERR(pb->pwm)) { >>>>> - ret = PTR_ERR(pb->pwm); >>>>> - if (ret = -EPROBE_DEFER) >>>>> - goto err_alloc; >>>>> - >>>>> + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER >>>>> + && !pdev->dev.of_node) { >>>>> dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); >>>>> pb->legacy = true; >>>>> pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); >>>>> - if (IS_ERR(pb->pwm)) { >>>>> - dev_err(&pdev->dev, "unable to request legacy PWM\n"); >>>>> - ret = PTR_ERR(pb->pwm); >>>>> - goto err_alloc; >>>>> - } >>>>> + } >>>>> + >>>>> + if (IS_ERR(pb->pwm)) { >>>>> + ret = PTR_ERR(pb->pwm); >>>>> + if (ret != -EPROBE_DEFER) >>>>> + dev_err(&pdev->dev, "unable to request PWM\n"); >>>>> + goto err_alloc; >>>>> } >>>>> >>>>> dev_dbg(&pdev->dev, "got pwm for backlight\n"); >>>>> >>>> >>>> >>> >>> I still think it would be cleaner to do what Thierry proposed here [1]. >>> IMO, embedding the complexity of different error cases depending on the >>> way PWM devices were defined (OF, pdata, ...) is rather risky and >>> make the code even more complicated. >> >> please correct me if I'm wrong, I suppose Thierry's change fixes >> Nicolas' commit 68feaca0b13 only, and the intention of my change is to >> fix an absolutely unrelated problem, see the commit message. >> >> So, since still there is a remained chance of getting -EPROBE_DEFER from >> pwm_get(), e.g. from of_pwm_get() or failed pwmchip_find_by_name() or >> pwm->chip->ops->request() I don't see how Thierry's change alone may >> help me to overcome the problem I'm trying to solve here. > > The only valid case where EPROBE_DEFER should be returned is when we > have a device that is not ready to be used yet (but we're sure that we > have this device declared, using either the PWM lookup table or the DT > definition in the PWM subsystem case). That's fine, and it is reflected in my change. > Thierry's patch makes sure that EPROBE_DEFER is not returned when the > PWM device definition is not found using in the PWM lookup tables or > the DT definition, This is okay, but I'm interested in proper handling of cases other than EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance and I'm attempting to avoid interfering with it here :) > and in this case the pwm_bl code will fallback to > the legacy PWM API, which AFAICT is what you're trying to solve. Fallback must happen exclusively under (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. Before EPROBE_DEFER appeared on the scene the condition was (IS_ERR(pb->pwm) && !pdev->dev.of_node). So, the question is if my change requires any updates or not from your point of view. -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 14:19 ` Vladimir Zapolskiy @ 2015-10-12 15:19 ` Boris Brezillon -1 siblings, 0 replies; 26+ messages in thread From: Boris Brezillon @ 2015-10-12 15:19 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev On Mon, 12 Oct 2015 17:19:35 +0300 Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > > > Thierry's patch makes sure that EPROBE_DEFER is not returned when the > > PWM device definition is not found using in the PWM lookup tables or > > the DT definition, > > This is okay, but I'm interested in proper handling of cases other than > EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance > and I'm attempting to avoid interfering with it here :) I keep thinking we should fix all platforms using the ->pwm_id pdata field to attach a PWM device to a PWM backlight instead of trying to guess when falling back to the legacy API is acceptable... > > > and in this case the pwm_bl code will fallback to > > the legacy PWM API, which AFAICT is what you're trying to solve. > > Fallback must happen exclusively under (IS_ERR(pb->pwm) && > PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. > > Before EPROBE_DEFER appeared on the scene the condition was > (IS_ERR(pb->pwm) && !pdev->dev.of_node). > > So, the question is if my change requires any updates or not from your > point of view. ... but from a functional point of view your patch seems correct. Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 15:19 ` Boris Brezillon 0 siblings, 0 replies; 26+ messages in thread From: Boris Brezillon @ 2015-10-12 15:19 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, Robert Jarzmik, linux-pwm, linux-fbdev On Mon, 12 Oct 2015 17:19:35 +0300 Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > > > Thierry's patch makes sure that EPROBE_DEFER is not returned when the > > PWM device definition is not found using in the PWM lookup tables or > > the DT definition, > > This is okay, but I'm interested in proper handling of cases other than > EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance > and I'm attempting to avoid interfering with it here :) I keep thinking we should fix all platforms using the ->pwm_id pdata field to attach a PWM device to a PWM backlight instead of trying to guess when falling back to the legacy API is acceptable... > > > and in this case the pwm_bl code will fallback to > > the legacy PWM API, which AFAICT is what you're trying to solve. > > Fallback must happen exclusively under (IS_ERR(pb->pwm) && > PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. > > Before EPROBE_DEFER appeared on the scene the condition was > (IS_ERR(pb->pwm) && !pdev->dev.of_node). > > So, the question is if my change requires any updates or not from your > point of view. ... but from a functional point of view your patch seems correct. Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 15:19 ` Boris Brezillon @ 2015-10-12 15:32 ` Vladimir Zapolskiy -1 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 15:32 UTC (permalink / raw) To: Boris Brezillon, Robert Jarzmik Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, linux-pwm, linux-fbdev On 12.10.2015 18:19, Boris Brezillon wrote: > On Mon, 12 Oct 2015 17:19:35 +0300 > Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: >> >>> Thierry's patch makes sure that EPROBE_DEFER is not returned when the >>> PWM device definition is not found using in the PWM lookup tables or >>> the DT definition, >> >> This is okay, but I'm interested in proper handling of cases other than >> EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance >> and I'm attempting to avoid interfering with it here :) > > I keep thinking we should fix all platforms using the ->pwm_id pdata > field to attach a PWM device to a PWM backlight instead of trying to > guess when falling back to the legacy API is acceptable... > >> >>> and in this case the pwm_bl code will fallback to >>> the legacy PWM API, which AFAICT is what you're trying to solve. >> >> Fallback must happen exclusively under (IS_ERR(pb->pwm) && >> PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. >> >> Before EPROBE_DEFER appeared on the scene the condition was >> (IS_ERR(pb->pwm) && !pdev->dev.of_node). >> >> So, the question is if my change requires any updates or not from your >> point of view. > > ... but from a functional point of view your patch seems correct. Sounds good, thank you for review. Robert, because you found a regression in the related area of code on a platform, which uses legacy PWM API, could you please confirm that three patches applied in a row don't break anything for you, the changes are: * Nicolas' 68feaca0b1 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") * Thierry' https://lkml.org/lkml/2015/10/5/319 * and this one is the last in the series: http://thread.gmane.org/gmane.linux.pwm/2813 -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 15:32 ` Vladimir Zapolskiy 0 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-12 15:32 UTC (permalink / raw) To: Boris Brezillon, Robert Jarzmik Cc: Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, linux-pwm, linux-fbdev On 12.10.2015 18:19, Boris Brezillon wrote: > On Mon, 12 Oct 2015 17:19:35 +0300 > Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: >> >>> Thierry's patch makes sure that EPROBE_DEFER is not returned when the >>> PWM device definition is not found using in the PWM lookup tables or >>> the DT definition, >> >> This is okay, but I'm interested in proper handling of cases other than >> EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance >> and I'm attempting to avoid interfering with it here :) > > I keep thinking we should fix all platforms using the ->pwm_id pdata > field to attach a PWM device to a PWM backlight instead of trying to > guess when falling back to the legacy API is acceptable... > >> >>> and in this case the pwm_bl code will fallback to >>> the legacy PWM API, which AFAICT is what you're trying to solve. >> >> Fallback must happen exclusively under (IS_ERR(pb->pwm) && >> PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. >> >> Before EPROBE_DEFER appeared on the scene the condition was >> (IS_ERR(pb->pwm) && !pdev->dev.of_node). >> >> So, the question is if my change requires any updates or not from your >> point of view. > > ... but from a functional point of view your patch seems correct. Sounds good, thank you for review. Robert, because you found a regression in the related area of code on a platform, which uses legacy PWM API, could you please confirm that three patches applied in a row don't break anything for you, the changes are: * Nicolas' 68feaca0b1 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") * Thierry' https://lkml.org/lkml/2015/10/5/319 * and this one is the last in the series: http://thread.gmane.org/gmane.linux.pwm/2813 -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 15:32 ` Vladimir Zapolskiy @ 2015-10-12 17:11 ` Robert Jarzmik -1 siblings, 0 replies; 26+ messages in thread From: Robert Jarzmik @ 2015-10-12 17:11 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Boris Brezillon, Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, linux-pwm, linux-fbdev Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> writes: > Sounds good, thank you for review. > > > Robert, > > because you found a regression in the related area of code on a > platform, which uses legacy PWM API, could you please confirm that three > patches applied in a row don't break anything for you, the changes are: > > * Nicolas' 68feaca0b1 ("backlight: pwm: Handle EPROBE_DEFER while > requesting the PWM") > * Thierry' https://lkml.org/lkml/2015/10/5/319 > * and this one is the last in the series: > http://thread.gmane.org/gmane.linux.pwm/2813 > > -- > With best wishes, > Vladimir Of course, on my way. Cheers. -- Robert ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-12 17:11 ` Robert Jarzmik 0 siblings, 0 replies; 26+ messages in thread From: Robert Jarzmik @ 2015-10-12 17:11 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Boris Brezillon, Nicolas Ferre, Thierry Reding, Lee Jones, Jingoo Han, linux-pwm, linux-fbdev Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> writes: > Sounds good, thank you for review. > > > Robert, > > because you found a regression in the related area of code on a > platform, which uses legacy PWM API, could you please confirm that three > patches applied in a row don't break anything for you, the changes are: > > * Nicolas' 68feaca0b1 ("backlight: pwm: Handle EPROBE_DEFER while > requesting the PWM") > * Thierry' https://lkml.org/lkml/2015/10/5/319 > * and this one is the last in the series: > http://thread.gmane.org/gmane.linux.pwm/2813 > > -- > With best wishes, > Vladimir Of course, on my way. Cheers. -- Robert ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 15:32 ` Vladimir Zapolskiy @ 2015-10-13 7:29 ` Lee Jones -1 siblings, 0 replies; 26+ messages in thread From: Lee Jones @ 2015-10-13 7:29 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Boris Brezillon, Robert Jarzmik, Nicolas Ferre, Thierry Reding, Jingoo Han, linux-pwm, linux-fbdev On Mon, 12 Oct 2015, Vladimir Zapolskiy wrote: > On 12.10.2015 18:19, Boris Brezillon wrote: > > On Mon, 12 Oct 2015 17:19:35 +0300 > > Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > >> > >>> Thierry's patch makes sure that EPROBE_DEFER is not returned when the > >>> PWM device definition is not found using in the PWM lookup tables or > >>> the DT definition, > >> > >> This is okay, but I'm interested in proper handling of cases other than > >> EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance > >> and I'm attempting to avoid interfering with it here :) > > > > I keep thinking we should fix all platforms using the ->pwm_id pdata > > field to attach a PWM device to a PWM backlight instead of trying to > > guess when falling back to the legacy API is acceptable... > > > >> > >>> and in this case the pwm_bl code will fallback to > >>> the legacy PWM API, which AFAICT is what you're trying to solve. > >> > >> Fallback must happen exclusively under (IS_ERR(pb->pwm) && > >> PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. > >> > >> Before EPROBE_DEFER appeared on the scene the condition was > >> (IS_ERR(pb->pwm) && !pdev->dev.of_node). > >> > >> So, the question is if my change requires any updates or not from your > >> point of view. > > > > ... but from a functional point of view your patch seems correct. > > Sounds good, thank you for review. So should I take this patch, or not? -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-13 7:29 ` Lee Jones 0 siblings, 0 replies; 26+ messages in thread From: Lee Jones @ 2015-10-13 7:29 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Boris Brezillon, Robert Jarzmik, Nicolas Ferre, Thierry Reding, Jingoo Han, linux-pwm, linux-fbdev On Mon, 12 Oct 2015, Vladimir Zapolskiy wrote: > On 12.10.2015 18:19, Boris Brezillon wrote: > > On Mon, 12 Oct 2015 17:19:35 +0300 > > Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: > >> > >>> Thierry's patch makes sure that EPROBE_DEFER is not returned when the > >>> PWM device definition is not found using in the PWM lookup tables or > >>> the DT definition, > >> > >> This is okay, but I'm interested in proper handling of cases other than > >> EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance > >> and I'm attempting to avoid interfering with it here :) > > > > I keep thinking we should fix all platforms using the ->pwm_id pdata > > field to attach a PWM device to a PWM backlight instead of trying to > > guess when falling back to the legacy API is acceptable... > > > >> > >>> and in this case the pwm_bl code will fallback to > >>> the legacy PWM API, which AFAICT is what you're trying to solve. > >> > >> Fallback must happen exclusively under (IS_ERR(pb->pwm) && > >> PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. > >> > >> Before EPROBE_DEFER appeared on the scene the condition was > >> (IS_ERR(pb->pwm) && !pdev->dev.of_node). > >> > >> So, the question is if my change requires any updates or not from your > >> point of view. > > > > ... but from a functional point of view your patch seems correct. > > Sounds good, thank you for review. So should I take this patch, or not? -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-13 7:29 ` Lee Jones @ 2015-10-15 10:45 ` Vladimir Zapolskiy -1 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-15 10:45 UTC (permalink / raw) To: Lee Jones Cc: Boris Brezillon, Robert Jarzmik, Nicolas Ferre, Thierry Reding, Jingoo Han, linux-pwm, linux-fbdev Hi Lee, Lee,On 13.10.2015 10:29, Lee Jones wrote: > On Mon, 12 Oct 2015, Vladimir Zapolskiy wrote: > >> On 12.10.2015 18:19, Boris Brezillon wrote: >>> On Mon, 12 Oct 2015 17:19:35 +0300 >>> Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: >>>> >>>>> Thierry's patch makes sure that EPROBE_DEFER is not returned when the >>>>> PWM device definition is not found using in the PWM lookup tables or >>>>> the DT definition, >>>> >>>> This is okay, but I'm interested in proper handling of cases other than >>>> EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance >>>> and I'm attempting to avoid interfering with it here :) >>> >>> I keep thinking we should fix all platforms using the ->pwm_id pdata >>> field to attach a PWM device to a PWM backlight instead of trying to >>> guess when falling back to the legacy API is acceptable... >>> >>>> >>>>> and in this case the pwm_bl code will fallback to >>>>> the legacy PWM API, which AFAICT is what you're trying to solve. >>>> >>>> Fallback must happen exclusively under (IS_ERR(pb->pwm) && >>>> PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. >>>> >>>> Before EPROBE_DEFER appeared on the scene the condition was >>>> (IS_ERR(pb->pwm) && !pdev->dev.of_node). >>>> >>>> So, the question is if my change requires any updates or not from your >>>> point of view. >>> >>> ... but from a functional point of view your patch seems correct. >> >> Sounds good, thank you for review. > > So should I take this patch, or not? > Robert's testing shows no regression, please apply this change on top of Nicolas' one. -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-15 10:45 ` Vladimir Zapolskiy 0 siblings, 0 replies; 26+ messages in thread From: Vladimir Zapolskiy @ 2015-10-15 10:45 UTC (permalink / raw) To: Lee Jones Cc: Boris Brezillon, Robert Jarzmik, Nicolas Ferre, Thierry Reding, Jingoo Han, linux-pwm, linux-fbdev Hi Lee, Lee,On 13.10.2015 10:29, Lee Jones wrote: > On Mon, 12 Oct 2015, Vladimir Zapolskiy wrote: > >> On 12.10.2015 18:19, Boris Brezillon wrote: >>> On Mon, 12 Oct 2015 17:19:35 +0300 >>> Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> wrote: >>>> >>>>> Thierry's patch makes sure that EPROBE_DEFER is not returned when the >>>>> PWM device definition is not found using in the PWM lookup tables or >>>>> the DT definition, >>>> >>>> This is okay, but I'm interested in proper handling of cases other than >>>> EPROBE_DEFER. EPROBE_DEFER and the related issues are on your balance >>>> and I'm attempting to avoid interfering with it here :) >>> >>> I keep thinking we should fix all platforms using the ->pwm_id pdata >>> field to attach a PWM device to a PWM backlight instead of trying to >>> guess when falling back to the legacy API is acceptable... >>> >>>> >>>>> and in this case the pwm_bl code will fallback to >>>>> the legacy PWM API, which AFAICT is what you're trying to solve. >>>> >>>> Fallback must happen exclusively under (IS_ERR(pb->pwm) && >>>> PTR_ERR(pb->pwm) != -EPROBE_DEFER && !pdev->dev.of_node) condition IMHO. >>>> >>>> Before EPROBE_DEFER appeared on the scene the condition was >>>> (IS_ERR(pb->pwm) && !pdev->dev.of_node). >>>> >>>> So, the question is if my change requires any updates or not from your >>>> point of view. >>> >>> ... but from a functional point of view your patch seems correct. >> >> Sounds good, thank you for review. > > So should I take this patch, or not? > Robert's testing shows no regression, please apply this change on top of Nicolas' one. -- With best wishes, Vladimir ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 15:32 ` Vladimir Zapolskiy @ 2015-10-13 9:21 ` Robert Jarzmik -1 siblings, 0 replies; 26+ messages in thread From: Robert Jarzmik @ 2015-10-13 9:21 UTC (permalink / raw) To: Vladimir Zapolskiy, Lee Jones Cc: Boris Brezillon, Nicolas Ferre, Thierry Reding, Jingoo Han, linux-pwm, linux-fbdev Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> writes: > Robert, > > because you found a regression in the related area of code on a > platform, which uses legacy PWM API, could you please confirm that three > patches applied in a row don't break anything for you, the changes are: > > * Nicolas' 68feaca0b1 ("backlight: pwm: Handle EPROBE_DEFER while > requesting the PWM") > * Thierry' https://lkml.org/lkml/2015/10/5/319 > * and this one is the last in the series: > http://thread.gmane.org/gmane.linux.pwm/2813 I confirm, my backlight works again with it : Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Cheers. -- Robert ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-13 9:21 ` Robert Jarzmik 0 siblings, 0 replies; 26+ messages in thread From: Robert Jarzmik @ 2015-10-13 9:21 UTC (permalink / raw) To: Vladimir Zapolskiy, Lee Jones Cc: Boris Brezillon, Nicolas Ferre, Thierry Reding, Jingoo Han, linux-pwm, linux-fbdev Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> writes: > Robert, > > because you found a regression in the related area of code on a > platform, which uses legacy PWM API, could you please confirm that three > patches applied in a row don't break anything for you, the changes are: > > * Nicolas' 68feaca0b1 ("backlight: pwm: Handle EPROBE_DEFER while > requesting the PWM") > * Thierry' https://lkml.org/lkml/2015/10/5/319 > * and this one is the last in the series: > http://thread.gmane.org/gmane.linux.pwm/2813 I confirm, my backlight works again with it : Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Cheers. -- Robert ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt 2015-10-12 12:29 ` Vladimir Zapolskiy @ 2015-10-15 11:03 ` Lee Jones -1 siblings, 0 replies; 26+ messages in thread From: Lee Jones @ 2015-10-15 11:03 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Thierry Reding, Jingoo Han, Nicolas Ferre, linux-pwm, linux-fbdev On Mon, 12 Oct 2015, Vladimir Zapolskiy wrote: > Platform PWM backlight data provided by board's device tree should be > complete enough to successfully request a pwm device using pwm_get() > API. This change fixes a bug, when an arbitrary (first found) PWM is > connected to a "pwm-backlight" compatible device, when explicit PWM > device reference is not given. > > Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > already describes "pwms" as a required property, instead of blind > selection of a potentially wrong PWM reject legacy PWM device > registration request, leave legacy API only for non-dt cases. > > Based on initial implementation done by Dmitry Eremin-Solenikov. > > Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > Acked-by: Thierry Reding <thierry.reding@gmail.com> > Acked-by: Lee Jones <lee.jones@linaro.org> > --- > The change is based on lee-backlight/for-backlight-next > > Changes from v1 to v2: > * rebased on top of Nicolas' commit > 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > > Links to previous discussions of the change: > * https://patchwork.ozlabs.org/patch/483993/ > * https://patchwork.ozlabs.org/patch/398849/ > > drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > 1 file changed, 9 insertions(+), 10 deletions(-) Applied, thanks. > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > index eff379b..ae3c6b6 100644 > --- a/drivers/video/backlight/pwm_bl.c > +++ b/drivers/video/backlight/pwm_bl.c > @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > } > > pb->pwm = devm_pwm_get(&pdev->dev, NULL); > - if (IS_ERR(pb->pwm)) { > - ret = PTR_ERR(pb->pwm); > - if (ret == -EPROBE_DEFER) > - goto err_alloc; > - > + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > + && !pdev->dev.of_node) { > dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > pb->legacy = true; > pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > - if (IS_ERR(pb->pwm)) { > - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > - ret = PTR_ERR(pb->pwm); > - goto err_alloc; > - } > + } > + > + if (IS_ERR(pb->pwm)) { > + ret = PTR_ERR(pb->pwm); > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, "unable to request PWM\n"); > + goto err_alloc; > } > > dev_dbg(&pdev->dev, "got pwm for backlight\n"); -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt @ 2015-10-15 11:03 ` Lee Jones 0 siblings, 0 replies; 26+ messages in thread From: Lee Jones @ 2015-10-15 11:03 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Thierry Reding, Jingoo Han, Nicolas Ferre, linux-pwm, linux-fbdev On Mon, 12 Oct 2015, Vladimir Zapolskiy wrote: > Platform PWM backlight data provided by board's device tree should be > complete enough to successfully request a pwm device using pwm_get() > API. This change fixes a bug, when an arbitrary (first found) PWM is > connected to a "pwm-backlight" compatible device, when explicit PWM > device reference is not given. > > Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt > already describes "pwms" as a required property, instead of blind > selection of a potentially wrong PWM reject legacy PWM device > registration request, leave legacy API only for non-dt cases. > > Based on initial implementation done by Dmitry Eremin-Solenikov. > > Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> > Acked-by: Thierry Reding <thierry.reding@gmail.com> > Acked-by: Lee Jones <lee.jones@linaro.org> > --- > The change is based on lee-backlight/for-backlight-next > > Changes from v1 to v2: > * rebased on top of Nicolas' commit > 68feaca0b13 ("backlight: pwm: Handle EPROBE_DEFER while requesting the PWM") > > Links to previous discussions of the change: > * https://patchwork.ozlabs.org/patch/483993/ > * https://patchwork.ozlabs.org/patch/398849/ > > drivers/video/backlight/pwm_bl.c | 19 +++++++++---------- > 1 file changed, 9 insertions(+), 10 deletions(-) Applied, thanks. > diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c > index eff379b..ae3c6b6 100644 > --- a/drivers/video/backlight/pwm_bl.c > +++ b/drivers/video/backlight/pwm_bl.c > @@ -271,19 +271,18 @@ static int pwm_backlight_probe(struct platform_device *pdev) > } > > pb->pwm = devm_pwm_get(&pdev->dev, NULL); > - if (IS_ERR(pb->pwm)) { > - ret = PTR_ERR(pb->pwm); > - if (ret = -EPROBE_DEFER) > - goto err_alloc; > - > + if (IS_ERR(pb->pwm) && PTR_ERR(pb->pwm) != -EPROBE_DEFER > + && !pdev->dev.of_node) { > dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n"); > pb->legacy = true; > pb->pwm = pwm_request(data->pwm_id, "pwm-backlight"); > - if (IS_ERR(pb->pwm)) { > - dev_err(&pdev->dev, "unable to request legacy PWM\n"); > - ret = PTR_ERR(pb->pwm); > - goto err_alloc; > - } > + } > + > + if (IS_ERR(pb->pwm)) { > + ret = PTR_ERR(pb->pwm); > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, "unable to request PWM\n"); > + goto err_alloc; > } > > dev_dbg(&pdev->dev, "got pwm for backlight\n"); -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog ^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2015-10-15 11:03 UTC | newest] Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-10-12 12:29 [PATCH v2] backlight: pwm: reject legacy pwm request for device defined in dt Vladimir Zapolskiy 2015-10-12 12:29 ` Vladimir Zapolskiy 2015-10-12 13:16 ` Nicolas Ferre 2015-10-12 13:16 ` Nicolas Ferre 2015-10-12 13:30 ` Boris Brezillon 2015-10-12 13:30 ` Boris Brezillon 2015-10-12 13:54 ` Vladimir Zapolskiy 2015-10-12 13:54 ` Vladimir Zapolskiy 2015-10-12 14:06 ` Boris Brezillon 2015-10-12 14:06 ` Boris Brezillon 2015-10-12 14:19 ` Vladimir Zapolskiy 2015-10-12 14:19 ` Vladimir Zapolskiy 2015-10-12 15:19 ` Boris Brezillon 2015-10-12 15:19 ` Boris Brezillon 2015-10-12 15:32 ` Vladimir Zapolskiy 2015-10-12 15:32 ` Vladimir Zapolskiy 2015-10-12 17:11 ` Robert Jarzmik 2015-10-12 17:11 ` Robert Jarzmik 2015-10-13 7:29 ` Lee Jones 2015-10-13 7:29 ` Lee Jones 2015-10-15 10:45 ` Vladimir Zapolskiy 2015-10-15 10:45 ` Vladimir Zapolskiy 2015-10-13 9:21 ` Robert Jarzmik 2015-10-13 9:21 ` Robert Jarzmik 2015-10-15 11:03 ` Lee Jones 2015-10-15 11:03 ` Lee Jones
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.