From: Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, ezequiel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org, manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> Subject: [PATCH v2 0/4] Add support for NXP LPC18xx EEPROM using nvmem Date: Mon, 19 Oct 2015 14:32:22 -0300 [thread overview] Message-ID: <1445275946-32653-1-git-send-email-ariel@vanguardiasur.com.ar> (raw) This patch series adds support for NXP LPC18xx EEPROM memory found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. This patchset is based on tag next-20151019 of the linux-next repository. It has been successfully tested on a LPC4337 CIAA-NXP Board. EEPROM notes: ------------ EEPROM size is 16384 bytes and it can be entirely read and written/erased with 1 word (4 bytes) granularity. The last page (128 bytes) contains the EEPROM initialization data and is not writable. Erase/program time is less than 3ms. The EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing the system bus clock by the division factor, contained in the divider register (minus 1 encoded). Changeset: --------- v1 -> v2: * Moved dt-bindings to be the first patch. * Changed compatible name from lpc1850 to lpc1857 as the former doesn't have EEPROM. * Fix hardware description which contained SoCs models without EEPROM. * Disabled fast_io and changed mdelay for msleep in regmap writes. * Replaced BUG_ON() in write function for an -EINVAL return. * Add patches for defconfig and devicetree files. Thanks, Ariel D'Alessandro (4): DT: nvmem: Add NXP LPC18xx EEPROM memory binding documentation nvmem: NXP LPC18xx EEPROM memory NVMEM driver ARM: dts: lpc18xx: add EEPROM memory node ARM: configs: lpc18xx: enable EEPROM NVMEM driver .../devicetree/bindings/nvmem/lpc1857-eeprom.txt | 26 ++ arch/arm/boot/dts/lpc18xx.dtsi | 12 + arch/arm/configs/lpc18xx_defconfig | 2 + drivers/nvmem/Kconfig | 9 + drivers/nvmem/Makefile | 2 + drivers/nvmem/lpc18xx_eeprom.c | 266 +++++++++++++++++++++ 6 files changed, 317 insertions(+) create mode 100644 Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt create mode 100644 drivers/nvmem/lpc18xx_eeprom.c -- 2.6.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: ariel@vanguardiasur.com.ar (Ariel D'Alessandro) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/4] Add support for NXP LPC18xx EEPROM using nvmem Date: Mon, 19 Oct 2015 14:32:22 -0300 [thread overview] Message-ID: <1445275946-32653-1-git-send-email-ariel@vanguardiasur.com.ar> (raw) This patch series adds support for NXP LPC18xx EEPROM memory found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. This patchset is based on tag next-20151019 of the linux-next repository. It has been successfully tested on a LPC4337 CIAA-NXP Board. EEPROM notes: ------------ EEPROM size is 16384 bytes and it can be entirely read and written/erased with 1 word (4 bytes) granularity. The last page (128 bytes) contains the EEPROM initialization data and is not writable. Erase/program time is less than 3ms. The EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing the system bus clock by the division factor, contained in the divider register (minus 1 encoded). Changeset: --------- v1 -> v2: * Moved dt-bindings to be the first patch. * Changed compatible name from lpc1850 to lpc1857 as the former doesn't have EEPROM. * Fix hardware description which contained SoCs models without EEPROM. * Disabled fast_io and changed mdelay for msleep in regmap writes. * Replaced BUG_ON() in write function for an -EINVAL return. * Add patches for defconfig and devicetree files. Thanks, Ariel D'Alessandro (4): DT: nvmem: Add NXP LPC18xx EEPROM memory binding documentation nvmem: NXP LPC18xx EEPROM memory NVMEM driver ARM: dts: lpc18xx: add EEPROM memory node ARM: configs: lpc18xx: enable EEPROM NVMEM driver .../devicetree/bindings/nvmem/lpc1857-eeprom.txt | 26 ++ arch/arm/boot/dts/lpc18xx.dtsi | 12 + arch/arm/configs/lpc18xx_defconfig | 2 + drivers/nvmem/Kconfig | 9 + drivers/nvmem/Makefile | 2 + drivers/nvmem/lpc18xx_eeprom.c | 266 +++++++++++++++++++++ 6 files changed, 317 insertions(+) create mode 100644 Documentation/devicetree/bindings/nvmem/lpc1857-eeprom.txt create mode 100644 drivers/nvmem/lpc18xx_eeprom.c -- 2.6.1
next reply other threads:[~2015-10-19 17:32 UTC|newest] Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-10-19 17:32 Ariel D'Alessandro [this message] 2015-10-19 17:32 ` [PATCH v2 0/4] Add support for NXP LPC18xx EEPROM using nvmem Ariel D'Alessandro [not found] ` <1445275946-32653-1-git-send-email-ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-10-19 17:32 ` [PATCH v2 1/4] DT: nvmem: Add NXP LPC18xx EEPROM memory binding documentation Ariel D'Alessandro 2015-10-19 17:32 ` Ariel D'Alessandro [not found] ` <1445275946-32653-2-git-send-email-ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-10-24 21:44 ` Joachim Eastwood 2015-10-24 21:44 ` Joachim Eastwood [not found] ` <CAGhQ9VyCBTWh6qgZ__eNLqooNURsYr9ZVtDz2qCKoa0MoVgXtA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2015-10-30 12:45 ` Ariel D'Alessandro 2015-10-30 12:45 ` Ariel D'Alessandro 2015-10-27 7:49 ` Rob Herring 2015-10-27 7:49 ` Rob Herring 2015-10-19 17:32 ` [PATCH v2 2/4] nvmem: NXP LPC18xx EEPROM memory NVMEM driver Ariel D'Alessandro 2015-10-19 17:32 ` Ariel D'Alessandro [not found] ` <1445275946-32653-3-git-send-email-ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-10-24 22:04 ` Joachim Eastwood 2015-10-24 22:04 ` Joachim Eastwood [not found] ` <CAGhQ9Vyg6sScq7yM=7judsMPHOc5VF2zf=7LPxmbmL7wF=vvgw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2015-10-26 13:37 ` Srinivas Kandagatla 2015-10-26 13:37 ` Srinivas Kandagatla [not found] ` <562E2CB1.80706-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2015-10-30 14:58 ` Ariel D'Alessandro 2015-10-30 14:58 ` Ariel D'Alessandro [not found] ` <563385B2.90403-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-11-16 15:33 ` Ariel D'Alessandro 2015-11-16 15:33 ` Ariel D'Alessandro [not found] ` <5649F74A.9020706-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-11-16 15:37 ` Srinivas Kandagatla 2015-11-16 15:37 ` Srinivas Kandagatla [not found] ` <5649F856.9000101-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2015-12-03 18:39 ` Ezequiel Garcia 2015-12-03 18:39 ` Ezequiel Garcia 2015-10-30 14:55 ` Ariel D'Alessandro 2015-10-30 14:55 ` Ariel D'Alessandro [not found] ` <563384CB.3070607-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-11-16 15:24 ` Ariel D'Alessandro 2015-11-16 15:24 ` Ariel D'Alessandro 2015-10-26 14:23 ` Srinivas Kandagatla 2015-10-26 14:23 ` Srinivas Kandagatla [not found] ` <562E377A.3040604-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2015-10-30 15:42 ` Ariel D'Alessandro 2015-10-30 15:42 ` Ariel D'Alessandro [not found] ` <56338FF4.8050102-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-10-30 16:00 ` Ezequiel Garcia 2015-10-30 16:00 ` Ezequiel Garcia 2015-11-03 8:20 ` Stefan Wahren 2015-11-03 8:20 ` Stefan Wahren [not found] ` <56386E30.4060905-eS4NqCHxEME@public.gmane.org> 2015-11-16 15:29 ` Ariel D'Alessandro 2015-11-16 15:29 ` Ariel D'Alessandro [not found] ` <5649F64B.5050407-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-11-17 10:01 ` Stefan Wahren 2015-11-17 10:01 ` Stefan Wahren [not found] ` <1526033037.5264.1447754499675.JavaMail.open-xchange-h4m1HHXQYNFdfASV6gReHsgmgJlYmuWJ@public.gmane.org> 2015-11-17 19:53 ` Ariel D'Alessandro 2015-11-17 19:53 ` Ariel D'Alessandro 2015-10-19 17:32 ` [PATCH v2 3/4] ARM: dts: lpc18xx: add EEPROM memory node Ariel D'Alessandro 2015-10-19 17:32 ` Ariel D'Alessandro [not found] ` <1445275946-32653-4-git-send-email-ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-10-24 21:42 ` Joachim Eastwood 2015-10-24 21:42 ` Joachim Eastwood 2015-10-19 17:32 ` [PATCH v2 4/4] ARM: configs: lpc18xx: enable EEPROM NVMEM driver Ariel D'Alessandro 2015-10-19 17:32 ` Ariel D'Alessandro [not found] ` <1445275946-32653-5-git-send-email-ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org> 2015-10-24 21:41 ` Joachim Eastwood 2015-10-24 21:41 ` Joachim Eastwood
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1445275946-32653-1-git-send-email-ariel@vanguardiasur.com.ar \ --to=ariel-30ulvvutt6g51wmpkgsgjgyuob5fgqpz@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=ezequiel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org \ --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \ --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \ --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=srinivas.kandagatla-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.