* [PATCH V3 00/12] dtb: amd: Miscellaneous Updates for AMD Seattle DTS
@ 2016-02-11 3:50 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:50 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
This patch series contains several updates for the AMD Seattle SOC DTS files.
It also adds new board files for newer Overdrive and Linaro 96boards (Husky)
platforms.
Olof,
You mentioned that you have already applied the V2 of the series
to next/dt64. Do you think we can just take the V3 instead if we don't
have any other issues/concerns?
Thanks,
Suravee
Changes from V2 (https://lkml.org/lkml/2016/2/8/692):
* Remove KCS interrupt name (per Arnd's suggestion)
* Fix ccn node address (per Arnd's suggestion)
* Add more description in git commit message for patch 3/12
(per Arnd's suggestion)
Changes from V1 (https://lkml.org/lkml/2016/1/27/1251):
* Fix duplication in MAINTAINERS file (per Martin review comment)
* Remove the PCIe SMMU device tree node for now to rework
(based on the discussion in the thread).
Brijesh Singh (2):
dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
dtb: amd: Add KCS device tree node
Suravee Suthikulpanit (9):
MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
dtb: amd: Fix DMA ranges of smb0 and pcie0
dtb: amd: Fix typo in SPI device nodes
dtb: amd: Misc changes for I2C device nodes
dtb: amd: Misc changes for SATA device tree nodes
dtb: amd: Misc changes for GPIO devices
dtb: amd: Add PERF CCN-504 device tree node
dtb: amd: Add support for new AMD Overdrive boards
dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition
Server board
Tom Lendacky (1):
dtb: amd: Add AMD XGBE device tree file
MAINTAINERS | 8 ++
arch/arm64/boot/dts/amd/Makefile | 4 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 +++++++++++++++++
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 104 +++++++++++++++++---
arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 +++++++++++++++++++++++
arch/arm64/boot/dts/amd/husky.dts | 83 ++++++++++++++++
7 files changed, 480 insertions(+), 14 deletions(-)
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
create mode 100644 arch/arm64/boot/dts/amd/husky.dts
--
2.5.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH V3 00/12] dtb: amd: Miscellaneous Updates for AMD Seattle DTS
@ 2016-02-11 3:50 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:50 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
This patch series contains several updates for the AMD Seattle SOC DTS files.
It also adds new board files for newer Overdrive and Linaro 96boards (Husky)
platforms.
Olof,
You mentioned that you have already applied the V2 of the series
to next/dt64. Do you think we can just take the V3 instead if we don't
have any other issues/concerns?
Thanks,
Suravee
Changes from V2 (https://lkml.org/lkml/2016/2/8/692):
* Remove KCS interrupt name (per Arnd's suggestion)
* Fix ccn node address (per Arnd's suggestion)
* Add more description in git commit message for patch 3/12
(per Arnd's suggestion)
Changes from V1 (https://lkml.org/lkml/2016/1/27/1251):
* Fix duplication in MAINTAINERS file (per Martin review comment)
* Remove the PCIe SMMU device tree node for now to rework
(based on the discussion in the thread).
Brijesh Singh (2):
dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
dtb: amd: Add KCS device tree node
Suravee Suthikulpanit (9):
MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
dtb: amd: Fix DMA ranges of smb0 and pcie0
dtb: amd: Fix typo in SPI device nodes
dtb: amd: Misc changes for I2C device nodes
dtb: amd: Misc changes for SATA device tree nodes
dtb: amd: Misc changes for GPIO devices
dtb: amd: Add PERF CCN-504 device tree node
dtb: amd: Add support for new AMD Overdrive boards
dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition
Server board
Tom Lendacky (1):
dtb: amd: Add AMD XGBE device tree file
MAINTAINERS | 8 ++
arch/arm64/boot/dts/amd/Makefile | 4 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 +++++++++++++++++
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 104 +++++++++++++++++---
arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 +++++++++++++++++++++++
arch/arm64/boot/dts/amd/husky.dts | 83 ++++++++++++++++
7 files changed, 480 insertions(+), 14 deletions(-)
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
create mode 100644 arch/arm64/boot/dts/amd/husky.dts
--
2.5.0
^ permalink raw reply [flat|nested] 39+ messages in thread* [PATCH V3 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Adding maintainers for AMD Seattle device tree.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7f1fa4f..e349a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -673,6 +673,13 @@ F: drivers/gpu/drm/radeon/radeon_kfd.c
F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
+AMD SEATTLE DEVICE TREE SUPPORT
+M: Brijesh Singh <brijeshkumar.singh@amd.com>
+M: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+M: Tom Lendacky <thomas.lendacky@amd.com>
+S: Supported
+F: arch/arm64/boot/dts/amd/
+
AMD XGBE DRIVER
M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Adding maintainers for AMD Seattle device tree.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7f1fa4f..e349a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -673,6 +673,13 @@ F: drivers/gpu/drm/radeon/radeon_kfd.c
F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
+AMD SEATTLE DEVICE TREE SUPPORT
+M: Brijesh Singh <brijeshkumar.singh@amd.com>
+M: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
+M: Tom Lendacky <thomas.lendacky@amd.com>
+S: Supported
+F: arch/arm64/boot/dts/amd/
+
AMD XGBE DRIVER
M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev at vger.kernel.org
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 01/12] MAINTAINERS: Adding Maintainers for AMD Seattle Device Tree
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof-nZhT3qVonbNeoWH0uzbU5w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
arm-DgEjT+Ai2ygdnm+yROfE0A, brijeshkumar.singh-5C7GfCeVMHo,
thomas.lendacky-5C7GfCeVMHo, leo.duran-5C7GfCeVMHo,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
Adding maintainers for AMD Seattle device tree.
Signed-off-by: Brijesh Singh <brijeshkumar.singh-5C7GfCeVMHo@public.gmane.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
Signed-off-by: Tom Lendacky <thomas.lendacky-5C7GfCeVMHo@public.gmane.org>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7f1fa4f..e349a32 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -673,6 +673,13 @@ F: drivers/gpu/drm/radeon/radeon_kfd.c
F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
+AMD SEATTLE DEVICE TREE SUPPORT
+M: Brijesh Singh <brijeshkumar.singh-5C7GfCeVMHo@public.gmane.org>
+M: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
+M: Tom Lendacky <thomas.lendacky-5C7GfCeVMHo@public.gmane.org>
+S: Supported
+F: arch/arm64/boot/dts/amd/
+
AMD XGBE DRIVER
M: Tom Lendacky <thomas.lendacky-5C7GfCeVMHo@public.gmane.org>
L: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 02/12] dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Brijesh Singh <brijeshkumar.singh@amd.com>
This patch fixes incorrect sizes of the GICv2 device tree node.
This has triggered error message when booting Xen hypervisor.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92..fdd0c96 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -18,8 +18,8 @@
#size-cells = <2>;
reg = <0x0 0xe1110000 0 0x1000>,
<0x0 0xe112f000 0 0x2000>,
- <0x0 0xe1140000 0 0x10000>,
- <0x0 0xe1160000 0 0x10000>;
+ <0x0 0xe1140000 0 0x2000>,
+ <0x0 0xe1160000 0 0x2000>;
interrupts = <1 9 0xf04>;
ranges = <0 0 0 0xe1100000 0 0x100000>;
v2m0: v2m@e0080000 {
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 02/12] dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Brijesh Singh <brijeshkumar.singh@amd.com>
This patch fixes incorrect sizes of the GICv2 device tree node.
This has triggered error message when booting Xen hypervisor.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92..fdd0c96 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -18,8 +18,8 @@
#size-cells = <2>;
reg = <0x0 0xe1110000 0 0x1000>,
<0x0 0xe112f000 0 0x2000>,
- <0x0 0xe1140000 0 0x10000>,
- <0x0 0xe1160000 0 0x10000>;
+ <0x0 0xe1140000 0 0x2000>,
+ <0x0 0xe1160000 0 0x2000>;
interrupts = <1 9 0xf04>;
ranges = <0 0 0 0xe1100000 0 0x100000>;
v2m0: v2m at e0080000 {
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 02/12] dtb: amd: Fix GICv2 hypervisor and virtual interface sizes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Brijesh Singh <brijeshkumar.singh@amd.com>
This patch fixes incorrect sizes of the GICv2 device tree node.
This has triggered error message when booting Xen hypervisor.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92..fdd0c96 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -18,8 +18,8 @@
#size-cells = <2>;
reg = <0x0 0xe1110000 0 0x1000>,
<0x0 0xe112f000 0 0x2000>,
- <0x0 0xe1140000 0 0x10000>,
- <0x0 0xe1160000 0 0x10000>;
+ <0x0 0xe1140000 0 0x2000>,
+ <0x0 0xe1160000 0 0x2000>;
interrupts = <1 9 0xf04>;
ranges = <0 0 0 0xe1100000 0 0x100000>;
v2m0: v2m@e0080000 {
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 03/12] dtb: amd: Fix DMA ranges of smb0 and pcie0
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Since GICv2m MSI frame is also considered DMA-able, we should also
include this range in the dma-range DT property as well. Therefore,
this patch fixes the smb0 and pcie0 dma-range properties.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index fdd0c96..5c73117 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -55,8 +55,12 @@
#size-cells = <2>;
ranges;
- /* DDR range is 40-bit addressing */
- dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ /*
+ * dma-ranges is 40-bit address space containing:
+ * - GICv2m MSI register is at 0xe0080000
+ * - DRAM range [0x8000000000 to 0xffffffffff]
+ */
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
/include/ "amd-seattle-clks.dtsi"
@@ -159,7 +163,7 @@
<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
dma-coherent;
- dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
ranges =
/* I/O Memory (size=64K) */
<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 03/12] dtb: amd: Fix DMA ranges of smb0 and pcie0
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Since GICv2m MSI frame is also considered DMA-able, we should also
include this range in the dma-range DT property as well. Therefore,
this patch fixes the smb0 and pcie0 dma-range properties.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index fdd0c96..5c73117 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -55,8 +55,12 @@
#size-cells = <2>;
ranges;
- /* DDR range is 40-bit addressing */
- dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ /*
+ * dma-ranges is 40-bit address space containing:
+ * - GICv2m MSI register is at 0xe0080000
+ * - DRAM range [0x8000000000 to 0xffffffffff]
+ */
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
/include/ "amd-seattle-clks.dtsi"
@@ -159,7 +163,7 @@
<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
dma-coherent;
- dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
ranges =
/* I/O Memory (size=64K) */
<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 03/12] dtb: amd: Fix DMA ranges of smb0 and pcie0
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Since GICv2m MSI frame is also considered DMA-able, we should also
include this range in the dma-range DT property as well. Therefore,
this patch fixes the smb0 and pcie0 dma-range properties.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index fdd0c96..5c73117 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -55,8 +55,12 @@
#size-cells = <2>;
ranges;
- /* DDR range is 40-bit addressing */
- dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ /*
+ * dma-ranges is 40-bit address space containing:
+ * - GICv2m MSI register is at 0xe0080000
+ * - DRAM range [0x8000000000 to 0xffffffffff]
+ */
+ dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
/include/ "amd-seattle-clks.dtsi"
@@ -159,7 +163,7 @@
<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
dma-coherent;
- dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
ranges =
/* I/O Memory (size=64K) */
<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 04/12] dtb: amd: Fix typo in SPI device nodes
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Remove invalid entry in the SPI device nodes.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 5c73117..c7c759a 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -91,7 +91,6 @@
spi0: ssp@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
- #gpio-cells = <2>;
reg = <0 0xe1020000 0 0x1000>;
spi-controller;
interrupts = <0 330 4>;
@@ -102,7 +101,6 @@
spi1: ssp@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
- #gpio-cells = <2>;
reg = <0 0xe1030000 0 0x1000>;
spi-controller;
interrupts = <0 329 4>;
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 04/12] dtb: amd: Fix typo in SPI device nodes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Remove invalid entry in the SPI device nodes.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 5c73117..c7c759a 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -91,7 +91,6 @@
spi0: ssp at e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
- #gpio-cells = <2>;
reg = <0 0xe1020000 0 0x1000>;
spi-controller;
interrupts = <0 330 4>;
@@ -102,7 +101,6 @@
spi1: ssp at e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
- #gpio-cells = <2>;
reg = <0 0xe1030000 0 0x1000>;
spi-controller;
interrupts = <0 329 4>;
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 04/12] dtb: amd: Fix typo in SPI device nodes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Remove invalid entry in the SPI device nodes.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 5c73117..c7c759a 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -91,7 +91,6 @@
spi0: ssp@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
- #gpio-cells = <2>;
reg = <0 0xe1020000 0 0x1000>;
spi-controller;
interrupts = <0 330 4>;
@@ -102,7 +101,6 @@
spi1: ssp@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
- #gpio-cells = <2>;
reg = <0 0xe1030000 0 0x1000>;
spi-controller;
interrupts = <0 329 4>;
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 05/12] dtb: amd: Misc changes for I2C device nodes
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new i2c1 device node, and fix the incorrect clock frequency.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c7c759a..4be36fd 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -77,7 +77,15 @@
compatible = "snps,designware-i2c";
reg = <0 0xe1000000 0 0x1000>;
interrupts = <0 357 4>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
+ };
+
+ i2c1: i2c@e0050000 {
+ status = "disabled";
+ compatible = "snps,designware-i2c";
+ reg = <0 0xe0050000 0 0x1000>;
+ interrupts = <0 340 4>;
+ clocks = <&miscclk_250mhz>;
};
serial0: serial@e1010000 {
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 05/12] dtb: amd: Misc changes for I2C device nodes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new i2c1 device node, and fix the incorrect clock frequency.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c7c759a..4be36fd 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -77,7 +77,15 @@
compatible = "snps,designware-i2c";
reg = <0 0xe1000000 0 0x1000>;
interrupts = <0 357 4>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
+ };
+
+ i2c1: i2c at e0050000 {
+ status = "disabled";
+ compatible = "snps,designware-i2c";
+ reg = <0 0xe0050000 0 0x1000>;
+ interrupts = <0 340 4>;
+ clocks = <&miscclk_250mhz>;
};
serial0: serial at e1010000 {
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 05/12] dtb: amd: Misc changes for I2C device nodes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, brijeshkumar.singh, thomas.lendacky, linux-kernel,
arm, leo.duran, Suravee Suthikulpanit, linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new i2c1 device node, and fix the incorrect clock frequency.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index c7c759a..4be36fd 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -77,7 +77,15 @@
compatible = "snps,designware-i2c";
reg = <0 0xe1000000 0 0x1000>;
interrupts = <0 357 4>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
+ };
+
+ i2c1: i2c@e0050000 {
+ status = "disabled";
+ compatible = "snps,designware-i2c";
+ reg = <0 0xe0050000 0 0x1000>;
+ interrupts = <0 340 4>;
+ clocks = <&miscclk_250mhz>;
};
serial0: serial@e1010000 {
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 06/12] dtb: amd: Misc changes for SATA device tree nodes
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new SATA1 device node, and fix the register range size of SATA0.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 4be36fd..9f59381 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -66,12 +66,22 @@
sata0: sata@e0300000 {
compatible = "snps,dwc-ahci";
- reg = <0 0xe0300000 0 0x800>;
+ reg = <0 0xe0300000 0 0xf0000>;
interrupts = <0 355 4>;
clocks = <&sataclk_333mhz>;
dma-coherent;
};
+ /* This is for Rev B only */
+ sata1: sata@e0d00000 {
+ status = "disabled";
+ compatible = "snps,dwc-ahci";
+ reg = <0 0xe0d00000 0 0xf0000>;
+ interrupts = <0 354 4>;
+ clocks = <&sataclk_333mhz>;
+ dma-coherent;
+ };
+
i2c0: i2c@e1000000 {
status = "disabled";
compatible = "snps,designware-i2c";
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 06/12] dtb: amd: Misc changes for SATA device tree nodes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new SATA1 device node, and fix the register range size of SATA0.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 4be36fd..9f59381 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -66,12 +66,22 @@
sata0: sata at e0300000 {
compatible = "snps,dwc-ahci";
- reg = <0 0xe0300000 0 0x800>;
+ reg = <0 0xe0300000 0 0xf0000>;
interrupts = <0 355 4>;
clocks = <&sataclk_333mhz>;
dma-coherent;
};
+ /* This is for Rev B only */
+ sata1: sata at e0d00000 {
+ status = "disabled";
+ compatible = "snps,dwc-ahci";
+ reg = <0 0xe0d00000 0 0xf0000>;
+ interrupts = <0 354 4>;
+ clocks = <&sataclk_333mhz>;
+ dma-coherent;
+ };
+
i2c0: i2c at e1000000 {
status = "disabled";
compatible = "snps,designware-i2c";
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 06/12] dtb: amd: Misc changes for SATA device tree nodes
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new SATA1 device node, and fix the register range size of SATA0.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 4be36fd..9f59381 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -66,12 +66,22 @@
sata0: sata@e0300000 {
compatible = "snps,dwc-ahci";
- reg = <0 0xe0300000 0 0x800>;
+ reg = <0 0xe0300000 0 0xf0000>;
interrupts = <0 355 4>;
clocks = <&sataclk_333mhz>;
dma-coherent;
};
+ /* This is for Rev B only */
+ sata1: sata@e0d00000 {
+ status = "disabled";
+ compatible = "snps,dwc-ahci";
+ reg = <0 0xe0d00000 0 0xf0000>;
+ interrupts = <0 354 4>;
+ clocks = <&sataclk_333mhz>;
+ dma-coherent;
+ };
+
i2c0: i2c@e1000000 {
status = "disabled";
compatible = "snps,designware-i2c";
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 07/12] dtb: amd: Misc changes for GPIO devices
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new GPIO device nodes and fix clock on gpio0.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 49 +++++++++++++++++++++++++---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 9f59381..ba455d1 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -129,7 +129,7 @@
#size-cells = <0>;
};
- gpio0: gpio@e1040000 {
+ gpio0: gpio@e1040000 { /* Not available to OS for B0 */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
@@ -138,18 +138,59 @@
interrupts = <0 359 4>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
- gpio1: gpio@e1050000 {
+ gpio1: gpio@e1050000 { /* [0:7] */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1050000 0 0x1000>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <0 358 4>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@e0020000 { /* [8:15] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0020000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 366 4>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio@e0030000 { /* [16:23] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0030000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 365 4>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio@e0080000 { /* [24] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0080000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 361 4>;
+ clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 07/12] dtb: amd: Misc changes for GPIO devices
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new GPIO device nodes and fix clock on gpio0.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 49 +++++++++++++++++++++++++---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 9f59381..ba455d1 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -129,7 +129,7 @@
#size-cells = <0>;
};
- gpio0: gpio at e1040000 {
+ gpio0: gpio at e1040000 { /* Not available to OS for B0 */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
@@ -138,18 +138,59 @@
interrupts = <0 359 4>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
- gpio1: gpio at e1050000 {
+ gpio1: gpio at e1050000 { /* [0:7] */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1050000 0 0x1000>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <0 358 4>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio at e0020000 { /* [8:15] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0020000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 366 4>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio at e0030000 { /* [16:23] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0030000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 365 4>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio at e0080000 { /* [24] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0080000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 361 4>;
+ clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 07/12] dtb: amd: Misc changes for GPIO devices
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add new GPIO device nodes and fix clock on gpio0.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 49 +++++++++++++++++++++++++---
1 file changed, 45 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 9f59381..ba455d1 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -129,7 +129,7 @@
#size-cells = <0>;
};
- gpio0: gpio@e1040000 {
+ gpio0: gpio@e1040000 { /* Not available to OS for B0 */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
@@ -138,18 +138,59 @@
interrupts = <0 359 4>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
- gpio1: gpio@e1050000 {
+ gpio1: gpio@e1050000 { /* [0:7] */
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1050000 0 0x1000>;
gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <0 358 4>;
- clocks = <&uartspiclk_100mhz>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@e0020000 { /* [8:15] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0020000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 366 4>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio@e0030000 { /* [16:23] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0030000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 365 4>;
+ clocks = <&miscclk_250mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio@e0080000 { /* [24] */
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe0080000 0 0x1000>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 361 4>;
+ clocks = <&miscclk_250mhz>;
clock-names = "apb_pclk";
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 08/12] dtb: amd: Add PERF CCN-504 device tree node
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add PERF CCN-504 device tree node.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index ba455d1..70f407d 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -229,5 +229,12 @@
/* 64-bit MMIO (size= 124G) */
<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
};
+
+ /* Perf CCN504 PMU */
+ ccn: ccn@e8000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x0 0xe8000000 0 0x1000000>;
+ interrupts = <0 380 4>;
+ };
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 08/12] dtb: amd: Add PERF CCN-504 device tree node
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add PERF CCN-504 device tree node.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index ba455d1..70f407d 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -229,5 +229,12 @@
/* 64-bit MMIO (size= 124G) */
<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
};
+
+ /* Perf CCN504 PMU */
+ ccn: ccn at e8000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x0 0xe8000000 0 0x1000000>;
+ interrupts = <0 380 4>;
+ };
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 08/12] dtb: amd: Add PERF CCN-504 device tree node
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add PERF CCN-504 device tree node.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index ba455d1..70f407d 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -229,5 +229,12 @@
/* 64-bit MMIO (size= 124G) */
<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
};
+
+ /* Perf CCN504 PMU */
+ ccn: ccn@e8000000 {
+ compatible = "arm,ccn-504";
+ reg = <0x0 0xe8000000 0 0x1000000>;
+ interrupts = <0 380 4>;
+ };
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 09/12] dtb: amd: Add KCS device tree node
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Brijesh Singh <brijeshkumar.singh@amd.com>
Add KCS device node to support IPMI solution on Overdrive
system.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 70f407d..bd3adea 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -236,5 +236,15 @@
reg = <0x0 0xe8000000 0 0x1000000>;
interrupts = <0 380 4>;
};
+
+ ipmi_kcs: kcs@e0010000 {
+ status = "disabled";
+ compatible = "ipmi-kcs";
+ device_type = "ipmi";
+ reg = <0x0 0xe0010000 0 0x8>;
+ interrupts = <0 389 4>;
+ reg-size = <1>;
+ reg-spacing = <4>;
+ };
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 09/12] dtb: amd: Add KCS device tree node
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Brijesh Singh <brijeshkumar.singh@amd.com>
Add KCS device node to support IPMI solution on Overdrive
system.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 70f407d..bd3adea 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -236,5 +236,15 @@
reg = <0x0 0xe8000000 0 0x1000000>;
interrupts = <0 380 4>;
};
+
+ ipmi_kcs: kcs at e0010000 {
+ status = "disabled";
+ compatible = "ipmi-kcs";
+ device_type = "ipmi";
+ reg = <0x0 0xe0010000 0 0x8>;
+ interrupts = <0 389 4>;
+ reg-size = <1>;
+ reg-spacing = <4>;
+ };
};
};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 09/12] dtb: amd: Add KCS device tree node
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof-nZhT3qVonbNeoWH0uzbU5w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
arm-DgEjT+Ai2ygdnm+yROfE0A, brijeshkumar.singh-5C7GfCeVMHo,
thomas.lendacky-5C7GfCeVMHo, leo.duran-5C7GfCeVMHo,
Suravee Suthikulpanit
From: Brijesh Singh <brijeshkumar.singh-5C7GfCeVMHo@public.gmane.org>
Add KCS device node to support IPMI solution on Overdrive
system.
Signed-off-by: Brijesh Singh <brijeshkumar.singh-5C7GfCeVMHo@public.gmane.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit-5C7GfCeVMHo@public.gmane.org>
---
arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 70f407d..bd3adea 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -236,5 +236,15 @@
reg = <0x0 0xe8000000 0 0x1000000>;
interrupts = <0 380 4>;
};
+
+ ipmi_kcs: kcs@e0010000 {
+ status = "disabled";
+ compatible = "ipmi-kcs";
+ device_type = "ipmi";
+ reg = <0x0 0xe0010000 0 0x8>;
+ interrupts = <0 389 4>;
+ reg-size = <1>;
+ reg-spacing = <4>;
+ };
};
};
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 10/12] dtb: amd: Add AMD XGBE device tree file
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran
From: Tom Lendacky <thomas.lendacky@amd.com>
Add AMD XGBE device tree file, which is available in AMD Seattle RevB.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 ++++++++++++++++++++++++
2 files changed, 118 insertions(+)
create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index e349a32..9547a68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,7 @@ M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
+F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000..8e86319
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+ xgmacclk0_dma_250mhz: clk250mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_dma_250mhz";
+ };
+
+ xgmacclk0_ptp_250mhz: clk250mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_ptp_250mhz";
+ };
+
+ xgmacclk1_dma_250mhz: clk250mhz_2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_dma_250mhz";
+ };
+
+ xgmacclk1_ptp_250mhz: clk250mhz_3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_ptp_250mhz";
+ };
+
+ xgmac0: xgmac@e0700000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0700000 0 0x80000>,
+ <0 0xe0780000 0 0x80000>,
+ <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+ <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 325 4>,
+ <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+ <0 323 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 A1 A2 A3 A4 A5 ];
+ clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac1: xgmac@e0900000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0900000 0 0x80000>,
+ <0 0xe0980000 0 0x80000>,
+ <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+ <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 324 4>,
+ <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+ <0 322 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 B1 B2 B3 B4 B5 ];
+ clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac0_smmu: smmu@e0600000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0600000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 336 4>,
+ <0 336 4>;
+
+ mmu-masters = <&xgmac0
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
+
+ xgmac1_smmu: smmu@e0800000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0800000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 335 4>,
+ <0 335 4>;
+
+ mmu-masters = <&xgmac1
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 10/12] dtb: amd: Add AMD XGBE device tree file
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Tom Lendacky <thomas.lendacky@amd.com>
Add AMD XGBE device tree file, which is available in AMD Seattle RevB.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 ++++++++++++++++++++++++
2 files changed, 118 insertions(+)
create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index e349a32..9547a68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,7 @@ M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev at vger.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
+F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000..8e86319
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+ xgmacclk0_dma_250mhz: clk250mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_dma_250mhz";
+ };
+
+ xgmacclk0_ptp_250mhz: clk250mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_ptp_250mhz";
+ };
+
+ xgmacclk1_dma_250mhz: clk250mhz_2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_dma_250mhz";
+ };
+
+ xgmacclk1_ptp_250mhz: clk250mhz_3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_ptp_250mhz";
+ };
+
+ xgmac0: xgmac at e0700000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0700000 0 0x80000>,
+ <0 0xe0780000 0 0x80000>,
+ <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+ <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 325 4>,
+ <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+ <0 323 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 A1 A2 A3 A4 A5 ];
+ clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac1: xgmac at e0900000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0900000 0 0x80000>,
+ <0 0xe0980000 0 0x80000>,
+ <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+ <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 324 4>,
+ <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+ <0 322 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 B1 B2 B3 B4 B5 ];
+ clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac0_smmu: smmu at e0600000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0600000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 336 4>,
+ <0 336 4>;
+
+ mmu-masters = <&xgmac0
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
+
+ xgmac1_smmu: smmu at e0800000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0800000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 335 4>,
+ <0 335 4>;
+
+ mmu-masters = <&xgmac1
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 10/12] dtb: amd: Add AMD XGBE device tree file
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran
From: Tom Lendacky <thomas.lendacky@amd.com>
Add AMD XGBE device tree file, which is available in AMD Seattle RevB.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi | 117 ++++++++++++++++++++++++
2 files changed, 118 insertions(+)
create mode 100644 arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index e349a32..9547a68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,7 @@ M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
+F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 0000000..8e86319
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+ xgmacclk0_dma_250mhz: clk250mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_dma_250mhz";
+ };
+
+ xgmacclk0_ptp_250mhz: clk250mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk0_ptp_250mhz";
+ };
+
+ xgmacclk1_dma_250mhz: clk250mhz_2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_dma_250mhz";
+ };
+
+ xgmacclk1_ptp_250mhz: clk250mhz_3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "xgmacclk1_ptp_250mhz";
+ };
+
+ xgmac0: xgmac@e0700000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0700000 0 0x80000>,
+ <0 0xe0780000 0 0x80000>,
+ <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+ <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 325 4>,
+ <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+ <0 323 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 A1 A2 A3 A4 A5 ];
+ clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac1: xgmac@e0900000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0 0xe0900000 0 0x80000>,
+ <0 0xe0980000 0 0x80000>,
+ <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+ <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+ <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+ interrupts = <0 324 4>,
+ <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+ <0 322 4>;
+ amd,per-channel-interrupt;
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <18>;
+ amd,serdes-tx-amp = <0>, <0>, <0>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+ mac-address = [ 02 B1 B2 B3 B4 B5 ];
+ clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ #stream-id-cells = <16>;
+ dma-coherent;
+ };
+
+ xgmac0_smmu: smmu@e0600000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0600000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 336 4>,
+ <0 336 4>;
+
+ mmu-masters = <&xgmac0
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
+
+ xgmac1_smmu: smmu@e0800000 {
+ compatible = "arm,mmu-401";
+ reg = <0 0xe0800000 0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = /* Uses combined intr for both
+ * global and context
+ */
+ <0 335 4>,
+ <0 335 4>;
+
+ mmu-masters = <&xgmac1
+ 0 1 2 3 4 5 6 7
+ 16 17 18 19 20 21 22 23
+ >;
+ };
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 11/12] dtb: amd: Add support for new AMD Overdrive boards
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 ++++++++++++++++++++++
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++++++++
3 files changed, 180 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701..db03293 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000..8e3074a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000..ed5e043
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&sata1 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 11/12] dtb: amd: Add support for new AMD Overdrive boards
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 ++++++++++++++++++++++
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++++++++
3 files changed, 180 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701..db03293 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000..8e3074a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard at 0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000..ed5e043
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&sata1 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard at 0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 11/12] dtb: amd: Add support for new AMD Overdrive boards
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add device tree files for AMD Overdrive boards which comes with
AMD Seattle Revision B0 and B1 SOCs.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts | 87 ++++++++++++++++++++++
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts | 91 ++++++++++++++++++++++++
3 files changed, 180 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
create mode 100644 arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701..db03293 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,5 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 0000000..8e3074a
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 0000000..ed5e043
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&sata1 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&ipmi_kcs {
+ status = "ok";
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH V3 12/12] dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition Server board
2016-02-11 3:50 ` Suravee Suthikulpanit
(?)
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
-1 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add device tree file for AMD/Linaro 96Boards Enterprise Edition Server
(Husky) Board. This is based on the AMD Seattle Rev.B0 system
Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/husky.dts | 83 +++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/amd/husky.dts
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index db03293..ba84770 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
- amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+ husky.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
new file mode 100644
index 0000000..1381d4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -0,0 +1,83 @@
+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 12/12] dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition Server board
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: linux-arm-kernel
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add device tree file for AMD/Linaro 96Boards Enterprise Edition Server
(Husky) Board. This is based on the AMD Seattle Rev.B0 system
Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/husky.dts | 83 +++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/amd/husky.dts
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index db03293..ba84770 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
- amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+ husky.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
new file mode 100644
index 0000000..1381d4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -0,0 +1,83 @@
+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard at 0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread* [PATCH V3 12/12] dtb: amd: Add support for AMD/Linaro 96Boards Enterprise Edition Server board
@ 2016-02-11 3:51 ` Suravee Suthikulpanit
0 siblings, 0 replies; 39+ messages in thread
From: Suravee Suthikulpanit @ 2016-02-11 3:51 UTC (permalink / raw)
To: olof, robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak, arnd
Cc: devicetree, linux-kernel, linux-arm-kernel, arm,
brijeshkumar.singh, thomas.lendacky, leo.duran,
Suravee Suthikulpanit
From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Add device tree file for AMD/Linaro 96Boards Enterprise Edition Server
(Husky) Board. This is based on the AMD Seattle Rev.B0 system
Signed-off-by: Leo Duran <leo.duran@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/arm64/boot/dts/amd/Makefile | 3 +-
arch/arm64/boot/dts/amd/husky.dts | 83 +++++++++++++++++++++++++++++++++++++++
2 files changed, 85 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/amd/husky.dts
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index db03293..ba84770 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,5 +1,6 @@
dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
- amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
+ amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+ husky.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
new file mode 100644
index 0000000..1381d4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -0,0 +1,83 @@
+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+};
+
+&ccp0 {
+ status = "ok";
+ amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+ status = "ok";
+};
+
+&gpio2 {
+ status = "ok";
+};
+
+&gpio3 {
+ status = "ok";
+};
+
+&gpio4 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&i2c1 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&smb0 {
+ /include/ "amd-seattle-xgbe-b.dtsi"
+};
--
2.5.0
^ permalink raw reply related [flat|nested] 39+ messages in thread