[PATCH] Addition of Altera Arria10 On-Chip RAM ECC

[PATCH] Addition of Altera Arria10 On-Chip RAM ECC

[tthayer]

This series of patches adds the Arria10 OCRAM EDAC support.

[PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC
[PATCH 2/7] EDAC, altera: Add register offset for ECC Enable
[PATCH 3/7] EDAC, altera: Make OCRAM ECC dependency check generic
[PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM
[PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC
[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup
[PATCH 7/7] ARM: dts: Add Altera Arria10 OCRAM EDAC devicetree entry

[PATCH] Addition of Altera Arria10 On-Chip RAM ECC

[tthayer at opensource.altera.com]

This series of patches adds the Arria10 OCRAM EDAC support.

[PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC
[PATCH 2/7] EDAC, altera: Add register offset for ECC Enable
[PATCH 3/7] EDAC, altera: Make OCRAM ECC dependency check generic
[PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM
[PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC
[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup
[PATCH 7/7] ARM: dts: Add Altera Arria10 OCRAM EDAC devicetree entry

[PATCH] Addition of Altera Arria10 On-Chip RAM ECC

[tthayer]

This series of patches adds the Arria10 OCRAM EDAC support.

[PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC
[PATCH 2/7] EDAC, altera: Add register offset for ECC Enable
[PATCH 3/7] EDAC, altera: Make OCRAM ECC dependency check generic
[PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM
[PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC
[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup
[PATCH 7/7] ARM: dts: Add Altera Arria10 OCRAM EDAC devicetree entry

[PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC modules

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, new file
operations are used because the Arria10 IRQ trigger mechanism
is different than Cyclone5/Arria5 and Arria10 L2 cache.

Add new pointer for file operations function to ecc data
structure and point to current file operations function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    5 ++++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 0afdc58..fb6fe56 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -668,7 +668,7 @@ static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 
 	if (!edac_debugfs_create_file(priv->dbgfs_name, S_IWUSR,
 				      drvdata->debugfs_dir, edac_dci,
-				      &altr_edac_device_inject_fops))
+				      priv->inject_fops))
 		debugfs_remove_recursive(drvdata->debugfs_dir);
 }
 
@@ -886,6 +886,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
@@ -975,6 +976,7 @@ const struct edac_device_prv_data l2ecc_data = {
 	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
 	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 const struct edac_device_prv_data a10_l2ecc_data = {
@@ -991,6 +993,7 @@ const struct edac_device_prv_data a10_l2ecc_data = {
 	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
 	.ecc_irq_handler = altr_edac_a10_l2_irq,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_L2C */
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index b0a17d0..c995388 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -262,6 +262,7 @@ struct edac_device_prv_data {
 	irqreturn_t (*ecc_irq_handler)(struct altr_edac_device_dev *dci,
 				       bool sb);
 	int trig_alloc_sz;
+	const struct file_operations *inject_fops;
 };
 
 struct altr_edac_device_dev {
-- 
1.7.9.5

[PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC modules

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, new file
operations are used because the Arria10 IRQ trigger mechanism
is different than Cyclone5/Arria5 and Arria10 L2 cache.

Add new pointer for file operations function to ecc data
structure and point to current file operations function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    5 ++++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 0afdc58..fb6fe56 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -668,7 +668,7 @@ static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 
 	if (!edac_debugfs_create_file(priv->dbgfs_name, S_IWUSR,
 				      drvdata->debugfs_dir, edac_dci,
-				      &altr_edac_device_inject_fops))
+				      priv->inject_fops))
 		debugfs_remove_recursive(drvdata->debugfs_dir);
 }
 
@@ -886,6 +886,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
@@ -975,6 +976,7 @@ const struct edac_device_prv_data l2ecc_data = {
 	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
 	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 const struct edac_device_prv_data a10_l2ecc_data = {
@@ -991,6 +993,7 @@ const struct edac_device_prv_data a10_l2ecc_data = {
 	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
 	.ecc_irq_handler = altr_edac_a10_l2_irq,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_L2C */
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index b0a17d0..c995388 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -262,6 +262,7 @@ struct edac_device_prv_data {
 	irqreturn_t (*ecc_irq_handler)(struct altr_edac_device_dev *dci,
 				       bool sb);
 	int trig_alloc_sz;
+	const struct file_operations *inject_fops;
 };
 
 struct altr_edac_device_dev {
-- 
1.7.9.5

[PATCH 1/7] EDAC, altera: New file operations for Arria10 ECC modules

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, new file
operations are used because the Arria10 IRQ trigger mechanism
is different than Cyclone5/Arria5 and Arria10 L2 cache.

Add new pointer for file operations function to ecc data
structure and point to current file operations function.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    5 ++++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 0afdc58..fb6fe56 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -668,7 +668,7 @@ static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 
 	if (!edac_debugfs_create_file(priv->dbgfs_name, S_IWUSR,
 				      drvdata->debugfs_dir, edac_dci,
-				      &altr_edac_device_inject_fops))
+				      priv->inject_fops))
 		debugfs_remove_recursive(drvdata->debugfs_dir);
 }
 
@@ -886,6 +886,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
@@ -975,6 +976,7 @@ const struct edac_device_prv_data l2ecc_data = {
 	.ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
 	.set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 const struct edac_device_prv_data a10_l2ecc_data = {
@@ -991,6 +993,7 @@ const struct edac_device_prv_data a10_l2ecc_data = {
 	.set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
 	.ecc_irq_handler = altr_edac_a10_l2_irq,
 	.trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
+	.inject_fops = &altr_edac_device_inject_fops,
 };
 
 #endif	/* CONFIG_EDAC_ALTERA_L2C */
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index b0a17d0..c995388 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -262,6 +262,7 @@ struct edac_device_prv_data {
 	irqreturn_t (*ecc_irq_handler)(struct altr_edac_device_dev *dci,
 				       bool sb);
 	int trig_alloc_sz;
+	const struct file_operations *inject_fops;
 };
 
 struct altr_edac_device_dev {
-- 
1.7.9.5

[PATCH 2/7] EDAC, altera: Add register offset for ECC Enable

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, a register
offset from the ECC base was added to the private data
structure to index to the ECC enable register.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    3 ++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index fb6fe56..f0a6de7 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -866,7 +866,7 @@ static int altr_ocram_check_deps(struct altr_edac_device_dev *device)
 	void __iomem  *base = device->base;
 	const struct edac_device_prv_data *prv = device->data;
 
-	if (readl(base) & prv->ecc_enable_mask)
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
 		return 0;
 
 	edac_printk(KERN_ERR, EDAC_DEVICE,
@@ -882,6 +882,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.alloc_mem = ocram_alloc_mem,
 	.free_mem = ocram_free_mem,
 	.ecc_enable_mask = ALTR_OCR_ECC_EN,
+	.ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS),
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index c995388..cb6b2b9 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -256,6 +256,7 @@ struct edac_device_prv_data {
 	void * (*alloc_mem)(size_t size, void **other);
 	void (*free_mem)(void *p, size_t size, void *other);
 	int ecc_enable_mask;
+	int ecc_en_ofst;
 	int ce_set_mask;
 	int ue_set_mask;
 	int set_err_ofst;
-- 
1.7.9.5

[PATCH 2/7] EDAC, altera: Add register offset for ECC Enable

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, a register
offset from the ECC base was added to the private data
structure to index to the ECC enable register.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    3 ++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index fb6fe56..f0a6de7 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -866,7 +866,7 @@ static int altr_ocram_check_deps(struct altr_edac_device_dev *device)
 	void __iomem  *base = device->base;
 	const struct edac_device_prv_data *prv = device->data;
 
-	if (readl(base) & prv->ecc_enable_mask)
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
 		return 0;
 
 	edac_printk(KERN_ERR, EDAC_DEVICE,
@@ -882,6 +882,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.alloc_mem = ocram_alloc_mem,
 	.free_mem = ocram_free_mem,
 	.ecc_enable_mask = ALTR_OCR_ECC_EN,
+	.ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS),
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index c995388..cb6b2b9 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -256,6 +256,7 @@ struct edac_device_prv_data {
 	void * (*alloc_mem)(size_t size, void **other);
 	void (*free_mem)(void *p, size_t size, void *other);
 	int ecc_enable_mask;
+	int ecc_en_ofst;
 	int ce_set_mask;
 	int ue_set_mask;
 	int set_err_ofst;
-- 
1.7.9.5

[PATCH 2/7] EDAC, altera: Add register offset for ECC Enable

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, a register
offset from the ECC base was added to the private data
structure to index to the ECC enable register.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |    3 ++-
 drivers/edac/altera_edac.h |    1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index fb6fe56..f0a6de7 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -866,7 +866,7 @@ static int altr_ocram_check_deps(struct altr_edac_device_dev *device)
 	void __iomem  *base = device->base;
 	const struct edac_device_prv_data *prv = device->data;
 
-	if (readl(base) & prv->ecc_enable_mask)
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
 		return 0;
 
 	edac_printk(KERN_ERR, EDAC_DEVICE,
@@ -882,6 +882,7 @@ const struct edac_device_prv_data ocramecc_data = {
 	.alloc_mem = ocram_alloc_mem,
 	.free_mem = ocram_free_mem,
 	.ecc_enable_mask = ALTR_OCR_ECC_EN,
+	.ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET,
 	.ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS),
 	.ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
 	.set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index c995388..cb6b2b9 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -256,6 +256,7 @@ struct edac_device_prv_data {
 	void * (*alloc_mem)(size_t size, void **other);
 	void (*free_mem)(void *p, size_t size, void *other);
 	int ecc_enable_mask;
+	int ecc_en_ofst;
 	int ce_set_mask;
 	int ue_set_mask;
 	int set_err_ofst;
-- 
1.7.9.5

[PATCH 3/7] EDAC, altera: Make OCRAM ECC dependency check generic

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, the OCRAM
ECC dependency check was moved into the general ECC area
since this same function can be used by other memories.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |   43 +++++++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index f0a6de7..f7ffc77 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -648,6 +648,26 @@ static ssize_t altr_edac_device_trig(struct file *file,
 	return count;
 }
 
+/*
+ *  Test for memory's ECC dependencies upon entry because platform specific
+ *  startup should have initialized the memory and enabled the ECC.
+ *  Can't turn on ECC here because accessing un-initialized memory will
+ *  cause CE/UE errors possibly causing an ABORT.
+ */
+static int altr_check_ecc_deps(struct altr_edac_device_dev *device)
+{
+	void __iomem  *base = device->base;
+	const struct edac_device_prv_data *prv = device->data;
+
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
+		return 0;
+
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s: No ECC present or ECC disabled.\n",
+		    device->edac_dev_name);
+	return -ENODEV;
+}
+
 static const struct file_operations altr_edac_device_inject_fops = {
 	.open = simple_open,
 	.write = altr_edac_device_trig,
@@ -853,29 +873,8 @@ static void ocram_free_mem(void *p, size_t size, void *other)
 	gen_pool_free((struct gen_pool *)other, (u32)p, size);
 }
 
-/*
- * altr_ocram_check_deps()
- *	Test for OCRAM cache ECC dependencies upon entry because
- *	platform specific startup should have initialized the
- *	On-Chip RAM memory and enabled the ECC.
- *	Can't turn on ECC here because accessing un-initialized
- *	memory will cause CE/UE errors possibly causing an ABORT.
- */
-static int altr_ocram_check_deps(struct altr_edac_device_dev *device)
-{
-	void __iomem  *base = device->base;
-	const struct edac_device_prv_data *prv = device->data;
-
-	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
-		return 0;
-
-	edac_printk(KERN_ERR, EDAC_DEVICE,
-		    "OCRAM: No ECC present or ECC disabled.\n");
-	return -ENODEV;
-}
-
 const struct edac_device_prv_data ocramecc_data = {
-	.setup = altr_ocram_check_deps,
+	.setup = altr_check_ecc_deps,
 	.ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR),
 	.ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR),
 	.dbgfs_name = "altr_ocram_trigger",
-- 
1.7.9.5

[PATCH 3/7] EDAC, altera: Make OCRAM ECC dependency check generic

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, the OCRAM
ECC dependency check was moved into the general ECC area
since this same function can be used by other memories.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |   43 +++++++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index f0a6de7..f7ffc77 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -648,6 +648,26 @@ static ssize_t altr_edac_device_trig(struct file *file,
 	return count;
 }
 
+/*
+ *  Test for memory's ECC dependencies upon entry because platform specific
+ *  startup should have initialized the memory and enabled the ECC.
+ *  Can't turn on ECC here because accessing un-initialized memory will
+ *  cause CE/UE errors possibly causing an ABORT.
+ */
+static int altr_check_ecc_deps(struct altr_edac_device_dev *device)
+{
+	void __iomem  *base = device->base;
+	const struct edac_device_prv_data *prv = device->data;
+
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
+		return 0;
+
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s: No ECC present or ECC disabled.\n",
+		    device->edac_dev_name);
+	return -ENODEV;
+}
+
 static const struct file_operations altr_edac_device_inject_fops = {
 	.open = simple_open,
 	.write = altr_edac_device_trig,
@@ -853,29 +873,8 @@ static void ocram_free_mem(void *p, size_t size, void *other)
 	gen_pool_free((struct gen_pool *)other, (u32)p, size);
 }
 
-/*
- * altr_ocram_check_deps()
- *	Test for OCRAM cache ECC dependencies upon entry because
- *	platform specific startup should have initialized the
- *	On-Chip RAM memory and enabled the ECC.
- *	Can't turn on ECC here because accessing un-initialized
- *	memory will cause CE/UE errors possibly causing an ABORT.
- */
-static int altr_ocram_check_deps(struct altr_edac_device_dev *device)
-{
-	void __iomem  *base = device->base;
-	const struct edac_device_prv_data *prv = device->data;
-
-	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
-		return 0;
-
-	edac_printk(KERN_ERR, EDAC_DEVICE,
-		    "OCRAM: No ECC present or ECC disabled.\n");
-	return -ENODEV;
-}
-
 const struct edac_device_prv_data ocramecc_data = {
-	.setup = altr_ocram_check_deps,
+	.setup = altr_check_ecc_deps,
 	.ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR),
 	.ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR),
 	.dbgfs_name = "altr_ocram_trigger",
-- 
1.7.9.5

[PATCH 3/7] EDAC, altera: Make OCRAM ECC dependency check generic

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

In preparation for the Arria10 peripheral ECCs, the OCRAM
ECC dependency check was moved into the general ECC area
since this same function can be used by other memories.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |   43 +++++++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 22 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index f0a6de7..f7ffc77 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -648,6 +648,26 @@ static ssize_t altr_edac_device_trig(struct file *file,
 	return count;
 }
 
+/*
+ *  Test for memory's ECC dependencies upon entry because platform specific
+ *  startup should have initialized the memory and enabled the ECC.
+ *  Can't turn on ECC here because accessing un-initialized memory will
+ *  cause CE/UE errors possibly causing an ABORT.
+ */
+static int altr_check_ecc_deps(struct altr_edac_device_dev *device)
+{
+	void __iomem  *base = device->base;
+	const struct edac_device_prv_data *prv = device->data;
+
+	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
+		return 0;
+
+	edac_printk(KERN_ERR, EDAC_DEVICE,
+		    "%s: No ECC present or ECC disabled.\n",
+		    device->edac_dev_name);
+	return -ENODEV;
+}
+
 static const struct file_operations altr_edac_device_inject_fops = {
 	.open = simple_open,
 	.write = altr_edac_device_trig,
@@ -853,29 +873,8 @@ static void ocram_free_mem(void *p, size_t size, void *other)
 	gen_pool_free((struct gen_pool *)other, (u32)p, size);
 }
 
-/*
- * altr_ocram_check_deps()
- *	Test for OCRAM cache ECC dependencies upon entry because
- *	platform specific startup should have initialized the
- *	On-Chip RAM memory and enabled the ECC.
- *	Can't turn on ECC here because accessing un-initialized
- *	memory will cause CE/UE errors possibly causing an ABORT.
- */
-static int altr_ocram_check_deps(struct altr_edac_device_dev *device)
-{
-	void __iomem  *base = device->base;
-	const struct edac_device_prv_data *prv = device->data;
-
-	if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
-		return 0;
-
-	edac_printk(KERN_ERR, EDAC_DEVICE,
-		    "OCRAM: No ECC present or ECC disabled.\n");
-	return -ENODEV;
-}
-
 const struct edac_device_prv_data ocramecc_data = {
-	.setup = altr_ocram_check_deps,
+	.setup = altr_check_ecc_deps,
 	.ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR),
 	.ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR),
 	.dbgfs_name = "altr_ocram_trigger",
-- 
1.7.9.5

[PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree bindings needed to support the Altera On-Chip
RAM ECC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 .../bindings/arm/altera/socfpga-eccmgr.txt         |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 37ff9bf..2f409d5 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -71,6 +71,11 @@ Required Properties:
 - compatible : Should be "altr,socfpga-a10-l2-ecc"
 - reg : Address and size for ECC error interrupt clear registers.
 
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg : Address and size for ECC block registers.
+
 Example:
 
 	eccmgr: eccmgr@ffd06000 {
@@ -86,4 +91,9 @@ Example:
 			compatible = "altr,socfpga-a10-l2-ecc";
 			reg = <0xffd06010 0x4>;
 		};
+
+		ocram-ecc@ff8c3000 {
+			compatible = "altr,socfpga-a10-ocram-ecc";
+			reg = <0xff8c3000 0x90>;
+		};
 	};
-- 
1.7.9.5

[PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree bindings needed to support the Altera On-Chip
RAM ECC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 .../bindings/arm/altera/socfpga-eccmgr.txt         |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 37ff9bf..2f409d5 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -71,6 +71,11 @@ Required Properties:
 - compatible : Should be "altr,socfpga-a10-l2-ecc"
 - reg : Address and size for ECC error interrupt clear registers.
 
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg : Address and size for ECC block registers.
+
 Example:
 
 	eccmgr: eccmgr at ffd06000 {
@@ -86,4 +91,9 @@ Example:
 			compatible = "altr,socfpga-a10-l2-ecc";
 			reg = <0xffd06010 0x4>;
 		};
+
+		ocram-ecc at ff8c3000 {
+			compatible = "altr,socfpga-a10-ocram-ecc";
+			reg = <0xff8c3000 0x90>;
+		};
 	};
-- 
1.7.9.5

[PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree bindings needed to support the Altera On-Chip
RAM ECC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 .../bindings/arm/altera/socfpga-eccmgr.txt         |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index 37ff9bf..2f409d5 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -71,6 +71,11 @@ Required Properties:
 - compatible : Should be "altr,socfpga-a10-l2-ecc"
 - reg : Address and size for ECC error interrupt clear registers.
 
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg : Address and size for ECC block registers.
+
 Example:
 
 	eccmgr: eccmgr@ffd06000 {
@@ -86,4 +91,9 @@ Example:
 			compatible = "altr,socfpga-a10-l2-ecc";
 			reg = <0xffd06010 0x4>;
 		};
+
+		ocram-ecc@ff8c3000 {
+			compatible = "altr,socfpga-a10-ocram-ecc";
+			reg = <0xff8c3000 0x90>;
+		};
 	};
-- 
1.7.9.5

Re: [PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding

[Rob Herring]

On Wed, Mar 30, 2016 at 10:27:45AM -0500, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the device tree bindings needed to support the Altera On-Chip
> RAM ECC on the Arria10 chip.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
>  .../bindings/arm/altera/socfpga-eccmgr.txt         |   10 ++++++++++
>  1 file changed, 10 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding

[Rob Herring]

On Wed, Mar 30, 2016 at 10:27:45AM -0500, tthayer at opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Add the device tree bindings needed to support the Altera On-Chip
> RAM ECC on the Arria10 chip.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
>  .../bindings/arm/altera/socfpga-eccmgr.txt         |   10 ++++++++++
>  1 file changed, 10 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 4/7] Documentation: dt: socfpga: Add Altera Arria10 OCRAM binding

[Rob Herring]

On Wed, Mar 30, 2016 at 10:27:45AM -0500, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
> From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> 
> Add the device tree bindings needed to support the Altera On-Chip
> RAM ECC on the Arria10 chip.
> 
> Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> ---
>  .../bindings/arm/altera/socfpga-eccmgr.txt         |   10 ++++++++++
>  1 file changed, 10 insertions(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Addition of the Arria10 On-Chip RAM ECC handling. Addition
of private data structure for Arria10 OCRAM ECC and the
ECC module and memory initialization functions which are
shared between memory modules such as NAND, Ethernet, etc.
Addition of a new file operations function and trigger
function for OCRAM and other peripheral memories.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |  202 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/edac/altera_edac.h |   42 +++++++++
 2 files changed, 244 insertions(+)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index f7ffc77..35e6f7e 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -19,6 +19,7 @@
 
 #include <asm/cacheflush.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 #include <linux/edac.h>
 #include <linux/genalloc.h>
 #include <linux/interrupt.h>
@@ -550,6 +551,7 @@ module_platform_driver(altr_edac_driver);
 
 const struct edac_device_prv_data ocramecc_data;
 const struct edac_device_prv_data l2ecc_data;
+const struct edac_device_prv_data a10_ocramecc_data;
 const struct edac_device_prv_data a10_l2ecc_data;
 
 static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
@@ -674,6 +676,16 @@ static const struct file_operations altr_edac_device_inject_fops = {
 	.llseek = generic_file_llseek,
 };
 
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject_fops = {
+	.open = simple_open,
+	.write = altr_edac_a10_device_trig,
+	.llseek = generic_file_llseek,
+};
+
 static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 				      const struct edac_device_prv_data *priv)
 {
@@ -701,6 +713,8 @@ static const struct of_device_id altr_edac_device_of_match[] = {
 #ifdef CONFIG_EDAC_ALTERA_OCRAM
 	{ .compatible = "altr,socfpga-ocram-ecc",
 	  .data = (void *)&ocramecc_data },
+	{ .compatible = "altr,socfpga-a10-ocram-ecc",
+	  .data = (void *)&a10_ocramecc_data },
 #endif
 	{},
 };
@@ -889,6 +903,24 @@ const struct edac_device_prv_data ocramecc_data = {
 	.inject_fops = &altr_edac_device_inject_fops,
 };
 
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+					 bool sberr);
+
+const struct edac_device_prv_data a10_ocramecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
+	.dbgfs_name = "altr_ocram_trigger",
+	.ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
 
 /********************* L2 Cache EDAC Device Functions ********************/
@@ -1007,6 +1039,173 @@ const struct edac_device_prv_data a10_l2ecc_data = {
  * Based on xgene_edac.c peripheral code.
  */
 
+static void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value |= bit_mask;
+	writel(value, ioaddr);
+}
+
+static void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value &= ~bit_mask;
+	writel(value, ioaddr);
+}
+
+static int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+	int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+	u32 init_mask = ALTR_A10_ECC_INITA;
+	u32 stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+	u32 clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+	int ret = 0;
+
+	if (port) {
+		init_mask = ALTR_A10_ECC_INITB;
+		stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+		clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+	}
+
+	ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+	while (limit--) {
+		if (ecc_test_bits(stat_mask,
+				  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+			break;
+		udelay(1);
+	}
+	if (limit < 0)
+		ret = -EBUSY;
+
+	/* Clear any pending ECC interrupts */
+	writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+	return ret;
+}
+
+/*
+ * Aside from the L2 ECC, the Arria10 ECC memories have a common register
+ * layout so the following functions can be shared between all peripherals.
+ */
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			    u32 ecc_ctrl_en_mask, bool dual_port)
+{
+	int ret = 0;
+	void __iomem *ecc_block_base;
+	struct regmap *ecc_mgr_map;
+	char *ecc_name = (char *)np->name;
+	struct device_node *np_parent = of_get_parent(np);
+
+	ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_parent,
+						      "altr,sysmgr-syscon");
+	of_node_put(np_parent);
+	if (IS_ERR(ecc_mgr_map)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get syscon altr,sysmgr-syscon\n");
+		return -ENODEV;
+	}
+
+	/* Map the ECC Block */
+	ecc_block_base = of_iomap(np, 0);
+	if (!ecc_block_base) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to map %s ECC block\n", ecc_name);
+		return -ENODEV;
+	}
+
+	/* Disable ECC */
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+	ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+		       (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	ecc_clear_bits(ecc_ctrl_en_mask,
+		       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+	/* Use HW initialization block to initialize memory for ECC */
+	ret = altr_init_memory_port(ecc_block_base, 0);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "ECC: cannot init %s PORTA memory\n", ecc_name);
+		goto out;
+	}
+
+	if (dual_port) {
+		ret = altr_init_memory_port(ecc_block_base, 1);
+		if (ret) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "ECC: cannot init %s PORTA memory\n",
+				    ecc_name);
+			goto out;
+		}
+	}
+
+	/* Enable ECC */
+	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+					ALTR_A10_ECC_CTRL_OFST));
+	ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+		     (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+	/* Ensure all writes complete */
+	wmb();
+out:
+	return ret;
+}
+
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+	unsigned long flags;
+	u8 trig_type;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	local_irq_save(flags);
+	if (trig_type == ALTR_UE_TRIGGER_CHAR)
+		writel(priv->ue_set_mask, set_addr);
+	else
+		writel(priv->ce_set_mask, set_addr);
+	/* Ensure the interrupt test bits are set */
+	wmb();
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+					 bool sberr)
+{
+	void __iomem  *base = dci->base;
+
+	if (sberr) {
+		writel(ALTR_A10_ECC_SERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+	} else {
+		writel(ALTR_A10_ECC_DERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+	}
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t altr_edac_a10_irq_handler(int irq, void *dev_id)
 {
 	irqreturn_t rc = IRQ_NONE;
@@ -1171,6 +1370,9 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 			continue;
 		if (of_device_is_compatible(child, "altr,socfpga-a10-l2-ecc"))
 			altr_edac_a10_device_add(edac, child);
+		else if (of_device_is_compatible(child,
+						 "altr,socfpga-a10-ocram-ecc"))
+			altr_edac_a10_device_add(edac, child);
 	}
 
 	return 0;
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index cb6b2b9..bd46810 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -19,6 +19,7 @@
 #define _ALTERA_EDAC_H
 
 #include <linux/edac.h>
+#include <linux/irq.h>
 #include <linux/types.h>
 
 /* SDRAM Controller CtrlCfg Register */
@@ -220,9 +221,41 @@ struct altr_sdram_mc_data {
 #define ALTR_L2_ECC_INJD                BIT(2)
 
 /* Arria10 General ECC Block Module Defines */
+#define ALTR_A10_ECC_CTRL_OFST          0x08
+#define ALTR_A10_ECC_EN                 BIT(0)
+#define ALTR_A10_ECC_INITA              BIT(16)
+#define ALTR_A10_ECC_INITB              BIT(24)
+
+#define ALTR_A10_ECC_INITSTAT_OFST      0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA      BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_SERRINTEN          BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST       0x20
+#define ALTR_A10_ECC_SERRPENA           BIT(0)
+#define ALTR_A10_ECC_DERRPENA           BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK       (ALTR_A10_ECC_SERRPENA | \
+					 ALTR_A10_ECC_DERRPENA)
+#define ALTR_A10_ECC_SERRPENB           BIT(16)
+#define ALTR_A10_ECC_DERRPENB           BIT(24)
+#define ALTR_A10_ECC_ERRPENB_MASK       (ALTR_A10_ECC_SERRPENB | \
+					 ALTR_A10_ECC_DERRPENB)
+
+#define ALTR_A10_ECC_INTTEST_OFST       0x24
+#define ALTR_A10_ECC_TSERRA             BIT(0)
+#define ALTR_A10_ECC_TDERRA             BIT(8)
+
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+
 #define A10_SYSMGR_ECC_INTSTAT_SERR_OFST  0x9C
 #define A10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xA0
 #define A10_SYSMGR_ECC_INTSTAT_L2         BIT(0)
+#define A10_SYSMGR_ECC_INTSTAT_OCRAM      BIT(1)
 
 #define A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST  0xA8
 #define A10_SYSGMR_MPU_CLEAR_L2_ECC_SB    BIT(15)
@@ -245,6 +278,9 @@ struct altr_sdram_mc_data {
 #define ALTR_A10_L2_ECC_CE_INJ_MASK     0x00000101
 #define ALTR_A10_L2_ECC_UE_INJ_MASK     0x00010101
 
+/* Arria 10 OCRAM ECC Management Group Defines */
+#define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
+
 struct altr_edac_device_dev;
 
 struct edac_device_prv_data {
@@ -288,4 +324,10 @@ struct altr_arria10_edac {
 	struct list_head	a10_ecc_devices;
 };
 
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
+
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			    u32 ecc_ctrl_en_mask, bool dual_port);
+
 #endif	/* #ifndef _ALTERA_EDAC_H */
-- 
1.7.9.5

[PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

Addition of the Arria10 On-Chip RAM ECC handling. Addition
of private data structure for Arria10 OCRAM ECC and the
ECC module and memory initialization functions which are
shared between memory modules such as NAND, Ethernet, etc.
Addition of a new file operations function and trigger
function for OCRAM and other peripheral memories.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |  202 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/edac/altera_edac.h |   42 +++++++++
 2 files changed, 244 insertions(+)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index f7ffc77..35e6f7e 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -19,6 +19,7 @@
 
 #include <asm/cacheflush.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 #include <linux/edac.h>
 #include <linux/genalloc.h>
 #include <linux/interrupt.h>
@@ -550,6 +551,7 @@ module_platform_driver(altr_edac_driver);
 
 const struct edac_device_prv_data ocramecc_data;
 const struct edac_device_prv_data l2ecc_data;
+const struct edac_device_prv_data a10_ocramecc_data;
 const struct edac_device_prv_data a10_l2ecc_data;
 
 static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
@@ -674,6 +676,16 @@ static const struct file_operations altr_edac_device_inject_fops = {
 	.llseek = generic_file_llseek,
 };
 
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject_fops = {
+	.open = simple_open,
+	.write = altr_edac_a10_device_trig,
+	.llseek = generic_file_llseek,
+};
+
 static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 				      const struct edac_device_prv_data *priv)
 {
@@ -701,6 +713,8 @@ static const struct of_device_id altr_edac_device_of_match[] = {
 #ifdef CONFIG_EDAC_ALTERA_OCRAM
 	{ .compatible = "altr,socfpga-ocram-ecc",
 	  .data = (void *)&ocramecc_data },
+	{ .compatible = "altr,socfpga-a10-ocram-ecc",
+	  .data = (void *)&a10_ocramecc_data },
 #endif
 	{},
 };
@@ -889,6 +903,24 @@ const struct edac_device_prv_data ocramecc_data = {
 	.inject_fops = &altr_edac_device_inject_fops,
 };
 
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+					 bool sberr);
+
+const struct edac_device_prv_data a10_ocramecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
+	.dbgfs_name = "altr_ocram_trigger",
+	.ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
 
 /********************* L2 Cache EDAC Device Functions ********************/
@@ -1007,6 +1039,173 @@ const struct edac_device_prv_data a10_l2ecc_data = {
  * Based on xgene_edac.c peripheral code.
  */
 
+static void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value |= bit_mask;
+	writel(value, ioaddr);
+}
+
+static void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value &= ~bit_mask;
+	writel(value, ioaddr);
+}
+
+static int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+	int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+	u32 init_mask = ALTR_A10_ECC_INITA;
+	u32 stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+	u32 clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+	int ret = 0;
+
+	if (port) {
+		init_mask = ALTR_A10_ECC_INITB;
+		stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+		clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+	}
+
+	ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+	while (limit--) {
+		if (ecc_test_bits(stat_mask,
+				  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+			break;
+		udelay(1);
+	}
+	if (limit < 0)
+		ret = -EBUSY;
+
+	/* Clear any pending ECC interrupts */
+	writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+	return ret;
+}
+
+/*
+ * Aside from the L2 ECC, the Arria10 ECC memories have a common register
+ * layout so the following functions can be shared between all peripherals.
+ */
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			    u32 ecc_ctrl_en_mask, bool dual_port)
+{
+	int ret = 0;
+	void __iomem *ecc_block_base;
+	struct regmap *ecc_mgr_map;
+	char *ecc_name = (char *)np->name;
+	struct device_node *np_parent = of_get_parent(np);
+
+	ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_parent,
+						      "altr,sysmgr-syscon");
+	of_node_put(np_parent);
+	if (IS_ERR(ecc_mgr_map)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get syscon altr,sysmgr-syscon\n");
+		return -ENODEV;
+	}
+
+	/* Map the ECC Block */
+	ecc_block_base = of_iomap(np, 0);
+	if (!ecc_block_base) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to map %s ECC block\n", ecc_name);
+		return -ENODEV;
+	}
+
+	/* Disable ECC */
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+	ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+		       (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	ecc_clear_bits(ecc_ctrl_en_mask,
+		       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+	/* Use HW initialization block to initialize memory for ECC */
+	ret = altr_init_memory_port(ecc_block_base, 0);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "ECC: cannot init %s PORTA memory\n", ecc_name);
+		goto out;
+	}
+
+	if (dual_port) {
+		ret = altr_init_memory_port(ecc_block_base, 1);
+		if (ret) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "ECC: cannot init %s PORTA memory\n",
+				    ecc_name);
+			goto out;
+		}
+	}
+
+	/* Enable ECC */
+	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+					ALTR_A10_ECC_CTRL_OFST));
+	ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+		     (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+	/* Ensure all writes complete */
+	wmb();
+out:
+	return ret;
+}
+
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+	unsigned long flags;
+	u8 trig_type;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	local_irq_save(flags);
+	if (trig_type == ALTR_UE_TRIGGER_CHAR)
+		writel(priv->ue_set_mask, set_addr);
+	else
+		writel(priv->ce_set_mask, set_addr);
+	/* Ensure the interrupt test bits are set */
+	wmb();
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+					 bool sberr)
+{
+	void __iomem  *base = dci->base;
+
+	if (sberr) {
+		writel(ALTR_A10_ECC_SERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+	} else {
+		writel(ALTR_A10_ECC_DERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+	}
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t altr_edac_a10_irq_handler(int irq, void *dev_id)
 {
 	irqreturn_t rc = IRQ_NONE;
@@ -1171,6 +1370,9 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 			continue;
 		if (of_device_is_compatible(child, "altr,socfpga-a10-l2-ecc"))
 			altr_edac_a10_device_add(edac, child);
+		else if (of_device_is_compatible(child,
+						 "altr,socfpga-a10-ocram-ecc"))
+			altr_edac_a10_device_add(edac, child);
 	}
 
 	return 0;
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index cb6b2b9..bd46810 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -19,6 +19,7 @@
 #define _ALTERA_EDAC_H
 
 #include <linux/edac.h>
+#include <linux/irq.h>
 #include <linux/types.h>
 
 /* SDRAM Controller CtrlCfg Register */
@@ -220,9 +221,41 @@ struct altr_sdram_mc_data {
 #define ALTR_L2_ECC_INJD                BIT(2)
 
 /* Arria10 General ECC Block Module Defines */
+#define ALTR_A10_ECC_CTRL_OFST          0x08
+#define ALTR_A10_ECC_EN                 BIT(0)
+#define ALTR_A10_ECC_INITA              BIT(16)
+#define ALTR_A10_ECC_INITB              BIT(24)
+
+#define ALTR_A10_ECC_INITSTAT_OFST      0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA      BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_SERRINTEN          BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST       0x20
+#define ALTR_A10_ECC_SERRPENA           BIT(0)
+#define ALTR_A10_ECC_DERRPENA           BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK       (ALTR_A10_ECC_SERRPENA | \
+					 ALTR_A10_ECC_DERRPENA)
+#define ALTR_A10_ECC_SERRPENB           BIT(16)
+#define ALTR_A10_ECC_DERRPENB           BIT(24)
+#define ALTR_A10_ECC_ERRPENB_MASK       (ALTR_A10_ECC_SERRPENB | \
+					 ALTR_A10_ECC_DERRPENB)
+
+#define ALTR_A10_ECC_INTTEST_OFST       0x24
+#define ALTR_A10_ECC_TSERRA             BIT(0)
+#define ALTR_A10_ECC_TDERRA             BIT(8)
+
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+
 #define A10_SYSMGR_ECC_INTSTAT_SERR_OFST  0x9C
 #define A10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xA0
 #define A10_SYSMGR_ECC_INTSTAT_L2         BIT(0)
+#define A10_SYSMGR_ECC_INTSTAT_OCRAM      BIT(1)
 
 #define A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST  0xA8
 #define A10_SYSGMR_MPU_CLEAR_L2_ECC_SB    BIT(15)
@@ -245,6 +278,9 @@ struct altr_sdram_mc_data {
 #define ALTR_A10_L2_ECC_CE_INJ_MASK     0x00000101
 #define ALTR_A10_L2_ECC_UE_INJ_MASK     0x00010101
 
+/* Arria 10 OCRAM ECC Management Group Defines */
+#define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
+
 struct altr_edac_device_dev;
 
 struct edac_device_prv_data {
@@ -288,4 +324,10 @@ struct altr_arria10_edac {
 	struct list_head	a10_ecc_devices;
 };
 
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
+
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			    u32 ecc_ctrl_en_mask, bool dual_port);
+
 #endif	/* #ifndef _ALTERA_EDAC_H */
-- 
1.7.9.5

[PATCH 5/7] EDAC, altera: Addition of Arria10 OCRAM ECC

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Addition of the Arria10 On-Chip RAM ECC handling. Addition
of private data structure for Arria10 OCRAM ECC and the
ECC module and memory initialization functions which are
shared between memory modules such as NAND, Ethernet, etc.
Addition of a new file operations function and trigger
function for OCRAM and other peripheral memories.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 drivers/edac/altera_edac.c |  202 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/edac/altera_edac.h |   42 +++++++++
 2 files changed, 244 insertions(+)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index f7ffc77..35e6f7e 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -19,6 +19,7 @@
 
 #include <asm/cacheflush.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 #include <linux/edac.h>
 #include <linux/genalloc.h>
 #include <linux/interrupt.h>
@@ -550,6 +551,7 @@ module_platform_driver(altr_edac_driver);
 
 const struct edac_device_prv_data ocramecc_data;
 const struct edac_device_prv_data l2ecc_data;
+const struct edac_device_prv_data a10_ocramecc_data;
 const struct edac_device_prv_data a10_l2ecc_data;
 
 static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
@@ -674,6 +676,16 @@ static const struct file_operations altr_edac_device_inject_fops = {
 	.llseek = generic_file_llseek,
 };
 
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos);
+
+static const struct file_operations altr_edac_a10_device_inject_fops = {
+	.open = simple_open,
+	.write = altr_edac_a10_device_trig,
+	.llseek = generic_file_llseek,
+};
+
 static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
 				      const struct edac_device_prv_data *priv)
 {
@@ -701,6 +713,8 @@ static const struct of_device_id altr_edac_device_of_match[] = {
 #ifdef CONFIG_EDAC_ALTERA_OCRAM
 	{ .compatible = "altr,socfpga-ocram-ecc",
 	  .data = (void *)&ocramecc_data },
+	{ .compatible = "altr,socfpga-a10-ocram-ecc",
+	  .data = (void *)&a10_ocramecc_data },
 #endif
 	{},
 };
@@ -889,6 +903,24 @@ const struct edac_device_prv_data ocramecc_data = {
 	.inject_fops = &altr_edac_device_inject_fops,
 };
 
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+					 bool sberr);
+
+const struct edac_device_prv_data a10_ocramecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_A10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_A10_ECC_DERRPENA,
+	.irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
+	.dbgfs_name = "altr_ocram_trigger",
+	.ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
+	.ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
+	.ce_set_mask = ALTR_A10_ECC_TSERRA,
+	.ue_set_mask = ALTR_A10_ECC_TDERRA,
+	.set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+
 #endif	/* CONFIG_EDAC_ALTERA_OCRAM */
 
 /********************* L2 Cache EDAC Device Functions ********************/
@@ -1007,6 +1039,173 @@ const struct edac_device_prv_data a10_l2ecc_data = {
  * Based on xgene_edac.c peripheral code.
  */
 
+static void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value |= bit_mask;
+	writel(value, ioaddr);
+}
+
+static void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	value &= ~bit_mask;
+	writel(value, ioaddr);
+}
+
+static int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
+{
+	u32 value = readl(ioaddr);
+
+	return (value & bit_mask) ? 1 : 0;
+}
+
+/*
+ * This function uses the memory initialization block in the Arria10 ECC
+ * controller to initialize/clear the entire memory data and ECC data.
+ */
+static int altr_init_memory_port(void __iomem *ioaddr, int port)
+{
+	int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
+	u32 init_mask = ALTR_A10_ECC_INITA;
+	u32 stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
+	u32 clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
+	int ret = 0;
+
+	if (port) {
+		init_mask = ALTR_A10_ECC_INITB;
+		stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
+		clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
+	}
+
+	ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
+	while (limit--) {
+		if (ecc_test_bits(stat_mask,
+				  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
+			break;
+		udelay(1);
+	}
+	if (limit < 0)
+		ret = -EBUSY;
+
+	/* Clear any pending ECC interrupts */
+	writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));
+
+	return ret;
+}
+
+/*
+ * Aside from the L2 ECC, the Arria10 ECC memories have a common register
+ * layout so the following functions can be shared between all peripherals.
+ */
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			    u32 ecc_ctrl_en_mask, bool dual_port)
+{
+	int ret = 0;
+	void __iomem *ecc_block_base;
+	struct regmap *ecc_mgr_map;
+	char *ecc_name = (char *)np->name;
+	struct device_node *np_parent = of_get_parent(np);
+
+	ecc_mgr_map = syscon_regmap_lookup_by_phandle(np_parent,
+						      "altr,sysmgr-syscon");
+	of_node_put(np_parent);
+	if (IS_ERR(ecc_mgr_map)) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to get syscon altr,sysmgr-syscon\n");
+		return -ENODEV;
+	}
+
+	/* Map the ECC Block */
+	ecc_block_base = of_iomap(np, 0);
+	if (!ecc_block_base) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "Unable to map %s ECC block\n", ecc_name);
+		return -ENODEV;
+	}
+
+	/* Disable ECC */
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
+	ecc_clear_bits(ALTR_A10_ECC_SERRINTEN,
+		       (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	ecc_clear_bits(ecc_ctrl_en_mask,
+		       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
+	/* Use HW initialization block to initialize memory for ECC */
+	ret = altr_init_memory_port(ecc_block_base, 0);
+	if (ret) {
+		edac_printk(KERN_ERR, EDAC_DEVICE,
+			    "ECC: cannot init %s PORTA memory\n", ecc_name);
+		goto out;
+	}
+
+	if (dual_port) {
+		ret = altr_init_memory_port(ecc_block_base, 1);
+		if (ret) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "ECC: cannot init %s PORTA memory\n",
+				    ecc_name);
+			goto out;
+		}
+	}
+
+	/* Enable ECC */
+	ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
+					ALTR_A10_ECC_CTRL_OFST));
+	ecc_set_bits(ALTR_A10_ECC_SERRINTEN,
+		     (ecc_block_base + ALTR_A10_ECC_ERRINTEN_OFST));
+	regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
+	/* Ensure all writes complete */
+	wmb();
+out:
+	return ret;
+}
+
+static ssize_t altr_edac_a10_device_trig(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct edac_device_ctl_info *edac_dci = file->private_data;
+	struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
+	const struct edac_device_prv_data *priv = drvdata->data;
+	void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
+	unsigned long flags;
+	u8 trig_type;
+
+	if (!user_buf || get_user(trig_type, user_buf))
+		return -EFAULT;
+
+	local_irq_save(flags);
+	if (trig_type == ALTR_UE_TRIGGER_CHAR)
+		writel(priv->ue_set_mask, set_addr);
+	else
+		writel(priv->ce_set_mask, set_addr);
+	/* Ensure the interrupt test bits are set */
+	wmb();
+	local_irq_restore(flags);
+
+	return count;
+}
+
+static irqreturn_t altr_edac_a10_ecc_irq(struct altr_edac_device_dev *dci,
+					 bool sberr)
+{
+	void __iomem  *base = dci->base;
+
+	if (sberr) {
+		writel(ALTR_A10_ECC_SERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);
+	} else {
+		writel(ALTR_A10_ECC_DERRPENA,
+		       base + ALTR_A10_ECC_INTSTAT_OFST);
+		edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
+		panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
+	}
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t altr_edac_a10_irq_handler(int irq, void *dev_id)
 {
 	irqreturn_t rc = IRQ_NONE;
@@ -1171,6 +1370,9 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 			continue;
 		if (of_device_is_compatible(child, "altr,socfpga-a10-l2-ecc"))
 			altr_edac_a10_device_add(edac, child);
+		else if (of_device_is_compatible(child,
+						 "altr,socfpga-a10-ocram-ecc"))
+			altr_edac_a10_device_add(edac, child);
 	}
 
 	return 0;
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index cb6b2b9..bd46810 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -19,6 +19,7 @@
 #define _ALTERA_EDAC_H
 
 #include <linux/edac.h>
+#include <linux/irq.h>
 #include <linux/types.h>
 
 /* SDRAM Controller CtrlCfg Register */
@@ -220,9 +221,41 @@ struct altr_sdram_mc_data {
 #define ALTR_L2_ECC_INJD                BIT(2)
 
 /* Arria10 General ECC Block Module Defines */
+#define ALTR_A10_ECC_CTRL_OFST          0x08
+#define ALTR_A10_ECC_EN                 BIT(0)
+#define ALTR_A10_ECC_INITA              BIT(16)
+#define ALTR_A10_ECC_INITB              BIT(24)
+
+#define ALTR_A10_ECC_INITSTAT_OFST      0x0C
+#define ALTR_A10_ECC_INITCOMPLETEA      BIT(0)
+#define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
+
+#define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_SERRINTEN          BIT(0)
+
+#define ALTR_A10_ECC_INTSTAT_OFST       0x20
+#define ALTR_A10_ECC_SERRPENA           BIT(0)
+#define ALTR_A10_ECC_DERRPENA           BIT(8)
+#define ALTR_A10_ECC_ERRPENA_MASK       (ALTR_A10_ECC_SERRPENA | \
+					 ALTR_A10_ECC_DERRPENA)
+#define ALTR_A10_ECC_SERRPENB           BIT(16)
+#define ALTR_A10_ECC_DERRPENB           BIT(24)
+#define ALTR_A10_ECC_ERRPENB_MASK       (ALTR_A10_ECC_SERRPENB | \
+					 ALTR_A10_ECC_DERRPENB)
+
+#define ALTR_A10_ECC_INTTEST_OFST       0x24
+#define ALTR_A10_ECC_TSERRA             BIT(0)
+#define ALTR_A10_ECC_TDERRA             BIT(8)
+
+/* ECC Manager Defines */
+#define A10_SYSMGR_ECC_INTMASK_SET_OFST   0x94
+#define A10_SYSMGR_ECC_INTMASK_CLR_OFST   0x98
+#define A10_SYSMGR_ECC_INTMASK_OCRAM      BIT(1)
+
 #define A10_SYSMGR_ECC_INTSTAT_SERR_OFST  0x9C
 #define A10_SYSMGR_ECC_INTSTAT_DERR_OFST  0xA0
 #define A10_SYSMGR_ECC_INTSTAT_L2         BIT(0)
+#define A10_SYSMGR_ECC_INTSTAT_OCRAM      BIT(1)
 
 #define A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST  0xA8
 #define A10_SYSGMR_MPU_CLEAR_L2_ECC_SB    BIT(15)
@@ -245,6 +278,9 @@ struct altr_sdram_mc_data {
 #define ALTR_A10_L2_ECC_CE_INJ_MASK     0x00000101
 #define ALTR_A10_L2_ECC_UE_INJ_MASK     0x00010101
 
+/* Arria 10 OCRAM ECC Management Group Defines */
+#define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
+
 struct altr_edac_device_dev;
 
 struct edac_device_prv_data {
@@ -288,4 +324,10 @@ struct altr_arria10_edac {
 	struct list_head	a10_ecc_devices;
 };
 
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
+
+int altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
+			    u32 ecc_ctrl_en_mask, bool dual_port);
+
 #endif	/* #ifndef _ALTERA_EDAC_H */
-- 
1.7.9.5

[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will fail
on reads.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 arch/arm/mach-socfpga/core.h    |    1 +
 arch/arm/mach-socfpga/ocram.c   |   22 ++++++++++++++++++++++
 arch/arm/mach-socfpga/socfpga.c |    2 ++
 3 files changed, 25 insertions(+)

diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index bfbc78d..65e1817 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -39,6 +39,7 @@ extern void socfpga_sysmgr_init(void);
 void socfpga_init_l2_ecc(void);
 void socfpga_init_ocram_ecc(void);
 void socfpga_init_arria10_l2_ecc(void);
+void socfpga_init_arria10_ocram_ecc(void);
 
 extern void __iomem *sys_manager_base_addr;
 extern void __iomem *rst_manager_base_addr;
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
index 60ec643..e9d0982 100644
--- a/arch/arm/mach-socfpga/ocram.c
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -19,6 +19,8 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 
+#include "../drivers/edac/altera_edac.h"
+
 #define ALTR_OCRAM_CLEAR_ECC          0x00000018
 #define ALTR_OCRAM_ECC_EN             0x00000019
 
@@ -47,3 +49,23 @@ void socfpga_init_ocram_ecc(void)
 
 	iounmap(mapped_ocr_edac_addr);
 }
+
+void socfpga_init_arria10_ocram_ecc(void)
+{
+	struct device_node *np;
+	int ret;
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
+		return;
+	}
+
+	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
+				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);
+	if (ret)
+		pr_err("Unable to initialize OCRAM\n");
+
+	of_node_put(np);
+}
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index e9b5b60..dde14f7 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -72,6 +72,8 @@ static void __init socfpga_arria10_init_irq(void)
 	socfpga_sysmgr_init();
 	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
 		socfpga_init_arria10_l2_ecc();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_arria10_ocram_ecc();
 }
 
 static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
-- 
1.7.9.5

[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will fail
on reads.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 arch/arm/mach-socfpga/core.h    |    1 +
 arch/arm/mach-socfpga/ocram.c   |   22 ++++++++++++++++++++++
 arch/arm/mach-socfpga/socfpga.c |    2 ++
 3 files changed, 25 insertions(+)

diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index bfbc78d..65e1817 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -39,6 +39,7 @@ extern void socfpga_sysmgr_init(void);
 void socfpga_init_l2_ecc(void);
 void socfpga_init_ocram_ecc(void);
 void socfpga_init_arria10_l2_ecc(void);
+void socfpga_init_arria10_ocram_ecc(void);
 
 extern void __iomem *sys_manager_base_addr;
 extern void __iomem *rst_manager_base_addr;
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
index 60ec643..e9d0982 100644
--- a/arch/arm/mach-socfpga/ocram.c
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -19,6 +19,8 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 
+#include "../drivers/edac/altera_edac.h"
+
 #define ALTR_OCRAM_CLEAR_ECC          0x00000018
 #define ALTR_OCRAM_ECC_EN             0x00000019
 
@@ -47,3 +49,23 @@ void socfpga_init_ocram_ecc(void)
 
 	iounmap(mapped_ocr_edac_addr);
 }
+
+void socfpga_init_arria10_ocram_ecc(void)
+{
+	struct device_node *np;
+	int ret;
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
+		return;
+	}
+
+	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
+				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);
+	if (ret)
+		pr_err("Unable to initialize OCRAM\n");
+
+	of_node_put(np);
+}
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index e9b5b60..dde14f7 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -72,6 +72,8 @@ static void __init socfpga_arria10_init_irq(void)
 	socfpga_sysmgr_init();
 	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
 		socfpga_init_arria10_l2_ecc();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_arria10_ocram_ecc();
 }
 
 static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
-- 
1.7.9.5

[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
enabled before data is stored in memory otherwise the ECC will fail
on reads.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 arch/arm/mach-socfpga/core.h    |    1 +
 arch/arm/mach-socfpga/ocram.c   |   22 ++++++++++++++++++++++
 arch/arm/mach-socfpga/socfpga.c |    2 ++
 3 files changed, 25 insertions(+)

diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index bfbc78d..65e1817 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -39,6 +39,7 @@ extern void socfpga_sysmgr_init(void);
 void socfpga_init_l2_ecc(void);
 void socfpga_init_ocram_ecc(void);
 void socfpga_init_arria10_l2_ecc(void);
+void socfpga_init_arria10_ocram_ecc(void);
 
 extern void __iomem *sys_manager_base_addr;
 extern void __iomem *rst_manager_base_addr;
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
index 60ec643..e9d0982 100644
--- a/arch/arm/mach-socfpga/ocram.c
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -19,6 +19,8 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 
+#include "../drivers/edac/altera_edac.h"
+
 #define ALTR_OCRAM_CLEAR_ECC          0x00000018
 #define ALTR_OCRAM_ECC_EN             0x00000019
 
@@ -47,3 +49,23 @@ void socfpga_init_ocram_ecc(void)
 
 	iounmap(mapped_ocr_edac_addr);
 }
+
+void socfpga_init_arria10_ocram_ecc(void)
+{
+	struct device_node *np;
+	int ret;
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
+		return;
+	}
+
+	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
+				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);
+	if (ret)
+		pr_err("Unable to initialize OCRAM\n");
+
+	of_node_put(np);
+}
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index e9b5b60..dde14f7 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -72,6 +72,8 @@ static void __init socfpga_arria10_init_irq(void)
 	socfpga_sysmgr_init();
 	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
 		socfpga_init_arria10_l2_ecc();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_arria10_ocram_ecc();
 }
 
 static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
-- 
1.7.9.5

Re: [PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[Dinh Nguyen]

On Wed, 30 Mar 2016, tthayer@opensource.altera.com wrote:

> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
> enabled before data is stored in memory otherwise the ECC will fail
> on reads.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---

[snip]

> +
> +void socfpga_init_arria10_ocram_ecc(void)
> +{
> +	struct device_node *np;
> +	int ret;
> +
> +	/* Find the OCRAM EDAC device tree node */
> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
> +	if (!np) {
> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
> +		return;
> +	}
> +
> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);

I think this is a no-no, you shouldn't be making a call directly into the driver
from here.

BR,
Dinh

[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[Dinh Nguyen]

On Wed, 30 Mar 2016, tthayer at opensource.altera.com wrote:

> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
> enabled before data is stored in memory otherwise the ECC will fail
> on reads.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---

[snip]

> +
> +void socfpga_init_arria10_ocram_ecc(void)
> +{
> +	struct device_node *np;
> +	int ret;
> +
> +	/* Find the OCRAM EDAC device tree node */
> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
> +	if (!np) {
> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
> +		return;
> +	}
> +
> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);

I think this is a no-no, you shouldn't be making a call directly into the driver
from here.

BR,
Dinh

Re: [PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[Dinh Nguyen]

On Wed, 30 Mar 2016, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:

> From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> 
> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
> enabled before data is stored in memory otherwise the ECC will fail
> on reads.
> 
> Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> ---

[snip]

> +
> +void socfpga_init_arria10_ocram_ecc(void)
> +{
> +	struct device_node *np;
> +	int ret;
> +
> +	/* Find the OCRAM EDAC device tree node */
> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
> +	if (!np) {
> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
> +		return;
> +	}
> +
> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);

I think this is a no-no, you shouldn't be making a call directly into the driver
from here.

BR,
Dinh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[Thor Thayer]

Hi Dinh,

On 03/30/2016 12:11 PM, Dinh Nguyen wrote:
> On Wed, 30 Mar 2016, tthayer@opensource.altera.com wrote:
>
>> From: Thor Thayer <tthayer@opensource.altera.com>
>>
>> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
>> enabled before data is stored in memory otherwise the ECC will fail
>> on reads.
>>
>> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
>> ---
>
> [snip]
>
>> +
>> +void socfpga_init_arria10_ocram_ecc(void)
>> +{
>> +	struct device_node *np;
>> +	int ret;
>> +
>> +	/* Find the OCRAM EDAC device tree node */
>> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
>> +	if (!np) {
>> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
>> +		return;
>> +	}
>> +
>> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
>> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);
>
> I think this is a no-no, you shouldn't be making a call directly into the driver
> from here.
>
> BR,
> Dinh
>
OK. I'll make the initialization local and resubmit. Thanks for reviewing.

[PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[Thor Thayer]

Hi Dinh,

On 03/30/2016 12:11 PM, Dinh Nguyen wrote:
> On Wed, 30 Mar 2016, tthayer at opensource.altera.com wrote:
>
>> From: Thor Thayer <tthayer@opensource.altera.com>
>>
>> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
>> enabled before data is stored in memory otherwise the ECC will fail
>> on reads.
>>
>> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
>> ---
>
> [snip]
>
>> +
>> +void socfpga_init_arria10_ocram_ecc(void)
>> +{
>> +	struct device_node *np;
>> +	int ret;
>> +
>> +	/* Find the OCRAM EDAC device tree node */
>> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
>> +	if (!np) {
>> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
>> +		return;
>> +	}
>> +
>> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
>> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);
>
> I think this is a no-no, you shouldn't be making a call directly into the driver
> from here.
>
> BR,
> Dinh
>
OK. I'll make the initialization local and resubmit. Thanks for reviewing.

Re: [PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup

[Thor Thayer]

Hi Dinh,

On 03/30/2016 12:11 PM, Dinh Nguyen wrote:
> On Wed, 30 Mar 2016, tthayer@opensource.altera.com wrote:
>
>> From: Thor Thayer <tthayer@opensource.altera.com>
>>
>> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
>> enabled before data is stored in memory otherwise the ECC will fail
>> on reads.
>>
>> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
>> ---
>
> [snip]
>
>> +
>> +void socfpga_init_arria10_ocram_ecc(void)
>> +{
>> +	struct device_node *np;
>> +	int ret;
>> +
>> +	/* Find the OCRAM EDAC device tree node */
>> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
>> +	if (!np) {
>> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
>> +		return;
>> +	}
>> +
>> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
>> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);
>
> I think this is a no-no, you shouldn't be making a call directly into the driver
> from here.
>
> BR,
> Dinh
>
OK. I'll make the initialization local and resubmit. Thanks for reviewing.

[PATCH 7/7] ARM: dts: Add Altera Arria10 OCRAM EDAC devicetree entry

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree entries needed to support the Altera On-Chip
RAM EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria10.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 519e9e4..27cc497 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -612,6 +612,11 @@
 				compatible = "altr,socfpga-a10-l2-ecc";
 				reg = <0xffd06010 0x4>;
 			};
+
+			ocram-ecc@ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {
-- 
1.7.9.5

[PATCH 7/7] ARM: dts: Add Altera Arria10 OCRAM EDAC devicetree entry

[tthayer at opensource.altera.com]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree entries needed to support the Altera On-Chip
RAM EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria10.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 519e9e4..27cc497 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -612,6 +612,11 @@
 				compatible = "altr,socfpga-a10-l2-ecc";
 				reg = <0xffd06010 0x4>;
 			};
+
+			ocram-ecc at ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+			};
 		};
 
 		rst: rstmgr at ffd05000 {
-- 
1.7.9.5

[PATCH 7/7] ARM: dts: Add Altera Arria10 OCRAM EDAC devicetree entry

[tthayer]

From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree entries needed to support the Altera On-Chip
RAM EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
 arch/arm/boot/dts/socfpga_arria10.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 519e9e4..27cc497 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -612,6 +612,11 @@
 				compatible = "altr,socfpga-a10-l2-ecc";
 				reg = <0xffd06010 0x4>;
 			};
+
+			ocram-ecc@ff8c3000 {
+				compatible = "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8c3000 0x400>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {
-- 
1.7.9.5