From: Guodong Xu <guodong.xu@linaro.org>
To: xuwei5@hisilicon.com, mark.rutland@arm.com, robh@kernel.org,
grant.likely@secretlab.ca, linus.walleij@linaro.org,
arnd.bergmann@linaro.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
kong.kongxinwei@hisilicon.com,
Chen Feng <puck.chen@hisilicon.com>, Fei Wang <w.f@huawei.com>
Subject: [PATCH v2 14/16] arm64: dts: hikey: Add hi655x pmic dts node
Date: Sat, 2 Apr 2016 17:29:41 +0800 [thread overview]
Message-ID: <1459589383-16914-15-git-send-email-guodong.xu@linaro.org> (raw)
In-Reply-To: <1459589383-16914-1-git-send-email-guodong.xu@linaro.org>
From: Chen Feng <puck.chen@hisilicon.com>
Add the mfd hi655x dts node and regulator support on
hi6220 platform.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Guodong Xu <guodong.xu@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 28bc646..a6dffa8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -6,6 +6,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "hi6220.dtsi"
#include "hikey-gpio.dtsi"
@@ -104,6 +105,92 @@
default-state = "off";
};
};
+
+ pmic: pmic@f8000000 {
+ compatible = "hisilicon,hi655x-pmic";
+ reg = <0x0 0xf8000000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ regulators {
+ ldo2: LDO2@a21 {
+ regulator-name = "LDO2_2V8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo7: LDO7@a26 {
+ regulator-name = "LDO7_SDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo10: LDO10@a29 {
+ regulator-name = "LDO10_2V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo13: LDO13@a32 {
+ regulator-name = "LDO13_1V8";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo14: LDO14@a33 {
+ regulator-name = "LDO14_2V8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo15: LDO15@a34 {
+ regulator-name = "LDO15_1V8";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo17: LDO17@a36 {
+ regulator-name = "LDO17_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo19: LDO19@a38 {
+ regulator-name = "LDO19_3V0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo21: LDO21@a40 {
+ regulator-name = "LDO21_1V8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo22: LDO22@a41 {
+ regulator-name = "LDO22_1V2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+ };
+ };
};
&uart2 {
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: guodong.xu@linaro.org (Guodong Xu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 14/16] arm64: dts: hikey: Add hi655x pmic dts node
Date: Sat, 2 Apr 2016 17:29:41 +0800 [thread overview]
Message-ID: <1459589383-16914-15-git-send-email-guodong.xu@linaro.org> (raw)
In-Reply-To: <1459589383-16914-1-git-send-email-guodong.xu@linaro.org>
From: Chen Feng <puck.chen@hisilicon.com>
Add the mfd hi655x dts node and regulator support on
hi6220 platform.
Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Fei Wang <w.f@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Guodong Xu <guodong.xu@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 28bc646..a6dffa8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -6,6 +6,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "hi6220.dtsi"
#include "hikey-gpio.dtsi"
@@ -104,6 +105,92 @@
default-state = "off";
};
};
+
+ pmic: pmic at f8000000 {
+ compatible = "hisilicon,hi655x-pmic";
+ reg = <0x0 0xf8000000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ regulators {
+ ldo2: LDO2 at a21 {
+ regulator-name = "LDO2_2V8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo7: LDO7 at a26 {
+ regulator-name = "LDO7_SDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo10: LDO10 at a29 {
+ regulator-name = "LDO10_2V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo13: LDO13 at a32 {
+ regulator-name = "LDO13_1V8";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo14: LDO14 at a33 {
+ regulator-name = "LDO14_2V8";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo15: LDO15 at a34 {
+ regulator-name = "LDO15_1V8";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo17: LDO17 at a36 {
+ regulator-name = "LDO17_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo19: LDO19 at a38 {
+ regulator-name = "LDO19_3V0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+
+ ldo21: LDO21 at a40 {
+ regulator-name = "LDO21_1V8";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo22: LDO22 at a41 {
+ regulator-name = "LDO22_1V2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+ };
+ };
};
&uart2 {
--
1.9.1
next prev parent reply other threads:[~2016-04-02 9:32 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-02 9:29 [PATCH v2 00/16] DTS for hi6220 and HiKey Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 01/16] arm64: dts: Reserve memory regions for hi6220 Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 02/16] arm64: dts: add sp804 timer node for Hi6220 Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-03 19:23 ` Linus Walleij
2016-04-03 19:23 ` Linus Walleij
2016-04-03 19:23 ` Linus Walleij
2016-04-04 1:43 ` Leo Yan
2016-04-04 1:43 ` Leo Yan
2016-04-04 1:43 ` Leo Yan
2016-04-04 11:21 ` Linus Walleij
2016-04-04 11:21 ` Linus Walleij
2016-04-04 11:21 ` Linus Walleij
2016-04-04 13:42 ` Leo Yan
2016-04-04 13:42 ` Leo Yan
2016-04-04 13:42 ` Leo Yan
2016-04-04 13:53 ` Linus Walleij
2016-04-04 13:53 ` Linus Walleij
2016-04-04 13:53 ` Linus Walleij
2016-04-04 14:03 ` Leo Yan
2016-04-04 14:03 ` Leo Yan
2016-04-04 14:03 ` Leo Yan
2016-04-04 5:16 ` Rob Herring
2016-04-04 5:16 ` Rob Herring
2016-04-04 5:16 ` Rob Herring
2016-04-02 9:29 ` [PATCH v2 03/16] arm64: dts: enable idle states " Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 04/16] arm64: dts: Add Hi6220 gpio configuration nodes Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-03 19:28 ` Linus Walleij
2016-04-03 19:28 ` Linus Walleij
2016-04-03 19:28 ` Linus Walleij
2016-04-12 9:18 ` Guodong Xu
2016-04-12 9:18 ` Guodong Xu
2016-04-12 9:18 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 05/16] arm64: dts: add Hi6220 pinctrl " Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-03 19:31 ` Linus Walleij
2016-04-03 19:31 ` Linus Walleij
2016-04-03 19:31 ` Linus Walleij
2016-04-04 22:54 ` Tony Lindgren
2016-04-04 22:54 ` Tony Lindgren
2016-04-04 22:54 ` Tony Lindgren
2016-04-12 8:28 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 06/16] arm64: dts: add Hi6220 spi " Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-04 5:16 ` Rob Herring
2016-04-04 5:16 ` Rob Herring
2016-04-12 9:40 ` Guodong Xu
2016-04-12 9:40 ` Guodong Xu
2016-04-12 9:40 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 07/16] arm64: dts: add all hi6220 i2c nodes Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 08/16] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-04 5:16 ` Rob Herring
2016-04-04 5:16 ` Rob Herring
2016-04-02 9:29 ` [PATCH v2 09/16] arm64: dts: add hi6220 usb node Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 10/16] arm64: dts: add mailbox node for Hi6220 Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 11/16] arm64: dts: add Hi6220's stub clock node Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 12/16] arm64: dts: hi6220: add pinctrl for uarts and enable them Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 13/16] arm64: dts: add LED nodes for hi6220-hikey Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-04 5:16 ` Rob Herring
2016-04-04 5:16 ` Rob Herring
2016-04-02 9:29 ` Guodong Xu [this message]
2016-04-02 9:29 ` [PATCH v2 14/16] arm64: dts: hikey: Add hi655x pmic dts node Guodong Xu
2016-04-04 5:16 ` Rob Herring
2016-04-04 5:16 ` Rob Herring
2016-04-12 13:14 ` Guodong Xu
2016-04-12 13:14 ` Guodong Xu
2016-04-12 13:14 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 15/16] arm64: dts: add dwmmc nodes for hi6220 Guodong Xu
2016-04-02 9:29 ` Guodong Xu
2016-04-02 9:29 ` [PATCH v2 16/16] arm64: dts: add wifi nodes support for hi6220-hikey Guodong Xu
2016-04-02 9:29 ` Guodong Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459589383-16914-15-git-send-email-guodong.xu@linaro.org \
--to=guodong.xu@linaro.org \
--cc=arnd.bergmann@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@secretlab.ca \
--cc=kong.kongxinwei@hisilicon.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=puck.chen@hisilicon.com \
--cc=robh@kernel.org \
--cc=w.f@huawei.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.