From: Krzysztof Kozlowski <krzk@kernel.org> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <k.kozlowski@samsung.com>, Sylwester Nawrocki <s.nawrocki@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, Javier Martinez Canillas <javier@osg.samsung.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Subject: [PATCH 6/6] ARM: dts: exynos: No need to enable TMU nodes on Odroid XU3 family Date: Tue, 31 May 2016 20:39:05 +0200 [thread overview] Message-ID: <1464719945-3417-6-git-send-email-krzk@kernel.org> (raw) In-Reply-To: <1464719945-3417-1-git-send-email-krzk@kernel.org> The thermal nodes are not disabled in exynos5420.dtsi so there is no need to manually enable them on Odroid XU3/XU3-Lite/XU4 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 20fa7612080d..c08392b9e0dd 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -388,27 +388,22 @@ &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu1 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu2 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu3 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_gpu { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &rtc { -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: krzk@kernel.org (Krzysztof Kozlowski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/6] ARM: dts: exynos: No need to enable TMU nodes on Odroid XU3 family Date: Tue, 31 May 2016 20:39:05 +0200 [thread overview] Message-ID: <1464719945-3417-6-git-send-email-krzk@kernel.org> (raw) In-Reply-To: <1464719945-3417-1-git-send-email-krzk@kernel.org> The thermal nodes are not disabled in exynos5420.dtsi so there is no need to manually enable them on Odroid XU3/XU3-Lite/XU4 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 20fa7612080d..c08392b9e0dd 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -388,27 +388,22 @@ &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu1 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu2 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu3 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_gpu { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &rtc { -- 2.7.4
next prev parent reply other threads:[~2016-05-31 18:40 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-05-31 18:39 [PATCH 1/6] dt-bindings: clock: Add TMU clock ID to Exynos5410 Krzysztof Kozlowski 2016-05-31 18:39 ` Krzysztof Kozlowski 2016-05-31 18:39 ` [PATCH 2/6] clk: samsung: exynos5410: Add TMU clock Krzysztof Kozlowski 2016-05-31 18:39 ` Krzysztof Kozlowski 2016-05-31 18:56 ` Javier Martinez Canillas 2016-05-31 18:56 ` Javier Martinez Canillas 2016-06-01 9:59 ` Sylwester Nawrocki 2016-06-01 9:59 ` Sylwester Nawrocki 2016-05-31 18:39 ` [PATCH 3/6] ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410 Krzysztof Kozlowski 2016-05-31 18:39 ` Krzysztof Kozlowski 2016-05-31 19:01 ` Javier Martinez Canillas 2016-05-31 19:01 ` Javier Martinez Canillas 2016-05-31 19:26 ` Krzysztof Kozlowski 2016-05-31 19:26 ` Krzysztof Kozlowski 2016-05-31 18:39 ` [PATCH 4/6] ARM: dts: exynos: Add Thermal Management Unit to Exynos5410 Krzysztof Kozlowski 2016-05-31 18:39 ` Krzysztof Kozlowski 2016-05-31 19:21 ` Javier Martinez Canillas 2016-05-31 19:21 ` Javier Martinez Canillas 2016-05-31 19:28 ` Krzysztof Kozlowski 2016-05-31 19:28 ` Krzysztof Kozlowski 2016-05-31 18:39 ` [PATCH 5/6] ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board Krzysztof Kozlowski 2016-05-31 18:39 ` Krzysztof Kozlowski 2016-05-31 19:36 ` Javier Martinez Canillas 2016-05-31 19:36 ` Javier Martinez Canillas 2016-05-31 20:05 ` Krzysztof Kozlowski 2016-05-31 20:05 ` Krzysztof Kozlowski 2016-05-31 20:10 ` Javier Martinez Canillas 2016-05-31 20:10 ` Javier Martinez Canillas 2016-05-31 18:39 ` Krzysztof Kozlowski [this message] 2016-05-31 18:39 ` [PATCH 6/6] ARM: dts: exynos: No need to enable TMU nodes on Odroid XU3 family Krzysztof Kozlowski 2016-05-31 19:37 ` Javier Martinez Canillas 2016-05-31 19:37 ` Javier Martinez Canillas 2016-05-31 18:53 ` [PATCH 1/6] dt-bindings: clock: Add TMU clock ID to Exynos5410 Javier Martinez Canillas 2016-05-31 18:53 ` Javier Martinez Canillas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1464719945-3417-6-git-send-email-krzk@kernel.org \ --to=krzk@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=javier@osg.samsung.com \ --cc=k.kozlowski@samsung.com \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=s.nawrocki@samsung.com \ --cc=sboyd@codeaurora.org \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.