From: Wan Zongshun <vw@iommu.org>
To: linux-arm-kernel@lists.infradead.org,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-kernel@vger.kernel.org, Wan Zongshun <vw@iommu.org>,
Wan Zongshun <mcuos.com@gmail.com>
Subject: [PATCH 2/6] ARM: dts: nuc900: Add nuc970 dts files
Date: Sat, 25 Jun 2016 18:37:18 +0800 [thread overview]
Message-ID: <1466851042-22239-3-git-send-email-vw@iommu.org> (raw)
In-Reply-To: <1466851042-22239-1-git-send-email-vw@iommu.org>
This patch is to add dts support for nuc970 platform.
Signed-off-by: Wan Zongshun <mcuos.com@gmail.com>
---
.../devicetree/bindings/arm/nuvoton/nuc970.txt | 30 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuc970-evb.dts | 20 ++
arch/arm/boot/dts/nuc970.dtsi | 93 ++++++++
include/dt-bindings/clock/nuc970-clock.h | 233 +++++++++++++++++++++
5 files changed, 377 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
create mode 100644 arch/arm/boot/dts/nuc970-evb.dts
create mode 100644 arch/arm/boot/dts/nuc970.dtsi
create mode 100644 include/dt-bindings/clock/nuc970-clock.h
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
new file mode 100644
index 0000000..df8637a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
@@ -0,0 +1,30 @@
+Nuvoton NUC970 SoC platform Device Tree Bindings
+------------------------------------------
+
+Boards with the NUC970 SoC shall have the following properties:
+
+Root node required properties:
+- compatible: Should be "nuvoton,nuc970evb", "nuvoton,nuc970"
+
+Timer required properties:
+- compatible: Should be "nuvoton,tmr"
+- reg: Should contain registers location and length
+- interrupts: hwirq is direct mapping to irq number
+- clocks: phandle to input clock.
+
+Clock required properties:
+- compatible: Should be "nuvoton,clk"
+- reg: Should contain registers location and length
+
+Interrupt-controller required properties
+- compatible: Should be "nuvoton,aic"
+- reg: Should contain registers location and length
+- interrupt-cells: set to 1
+
+GCR register required properties:
+- compatible: Should be "nuvoton,gcr"
+- reg: Should contain registers location and length
+
+Uart required properties:
+- compatible: Should be "nuvoton,nuc970-uart"
+- reg: Should contain registers location and length
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d..c2e2a53 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -891,6 +891,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
aspeed-ast2500-evb.dtb
+dtb-$(CONFIG_SOC_NUC970) += nuc970-evb.dtb
endif
dtstree := $(srctree)/$(src)
diff --git a/arch/arm/boot/dts/nuc970-evb.dts b/arch/arm/boot/dts/nuc970-evb.dts
new file mode 100644
index 0000000..bd56ad1
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970-evb.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "nuc970.dtsi"
+
+/ {
+ model = "NUC970 EVB Board";
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+};
+
diff --git a/arch/arm/boot/dts/nuc970.dtsi b/arch/arm/boot/dts/nuc970.dtsi
new file mode 100644
index 0000000..8a6c225
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/nuc970-clock.h>
+
+/ {
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ reg = <0x00000000 0x04000000>;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ ahb@B0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB0000000 0x9000>;
+ ranges;
+
+ gcr: gcr@B0000000 {
+ compatible = "nuvoton,gcr";
+ reg = <0xB0000000 0x200>;
+ };
+
+ clks: clk@B0000200 {
+ compatible = "nuvoton,clk";
+ reg = <0xB0000200 0x200>;
+ #clock-cells = <1>;
+ };
+
+ };
+
+ apb@B8000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB8000000 0xF000>;
+ ranges;
+
+ aic: interrupt-controller@B8002000 {
+ compatible = "nuvoton,aic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xB8002000 0x1000>;
+ };
+
+
+ tmr@0xB8001000 {
+ compatible = "nuvoton,tmr";
+ reg = <0xB8001000 0x1000>;
+ interrupts = <16>;
+ clocks = <&clks TIMER0_GATE>,
+ <&clks TIMER1_GATE>;
+ clock-names = "timer0", "timer1";
+
+ };
+
+ uart0: serial@B8000000 {
+ compatible = "nuvoton,nuc970-uart";
+ reg = <0xB8000000 0x1000>;
+ interrupts = <36>;
+ clocks = <&clks UART0_GATE>,
+ <&clks UART0_ECLK_GATE>;
+ clock-names = "uart0", "uart0_eclk";
+ clock-frequency = <12000000>;
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/nuc970-clock.h b/include/dt-bindings/clock/nuc970-clock.h
new file mode 100644
index 0000000..cbfcc77
--- /dev/null
+++ b/include/dt-bindings/clock/nuc970-clock.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NUC970_H
+#define __DT_BINDINGS_CLOCK_NUC970_H
+
+/*SOURCE*/
+
+#define XIN 0
+#define APLL 1
+#define UPLL 2
+#define XIN32K 3
+#define XIN128_DIV 4
+
+/*ECLK*/
+
+#define USB_APLLDIV 5
+#define USB_UPLLDIV 6
+#define USB_ECLK_MUX 7
+#define USB_ECLK_DIV 8
+#define USB_ECLK_GATE 9
+#define SD_APLLDIV 10
+#define SD_UPLLDIV 11
+#define SD_ECLK_MUX 12
+#define SD_ECLK_DIV 13
+#define SD_ECLK_GATE 14
+#define LCD_APLLDIV 15
+#define LCD_UPLLDIV 16
+#define LCD_ECLK_MUX 17
+#define LCD_ECLK_DIV 18
+#define LCD_ECLK_GATE 19
+#define ADC_APLLDIV 20
+#define ADC_UPLLDIV 21
+#define ADC_ECLK_MUX 22
+#define ADC_ECLK_DIV 23
+#define ADC_ECLK_GATE 24
+#define AUDIO_APLLDIV 25
+#define AUDIO_UPLLDIV 26
+#define AUDIO_ECLK_MUX 27
+#define AUDIO_ECLK_DIV 28
+#define AUDIO_ECLK_GATE 29
+#define CAP_APLLDIV 30
+#define CAP_UPLLDIV 31
+#define CAP_ECLK_MUX 32
+#define CAP_ECLK_DIV 33
+#define CAP_ECLK_GATE 34
+#define SDH_APLLDIV 35
+#define SDH_UPLLDIV 36
+#define SDH_ECLK_MUX 37
+#define SDH_ECLK_DIV 38
+#define SDH_ECLK_GATE 39
+#define EMMC_APLLDIV 40
+#define EMMC_UPLLDIV 41
+#define EMMC_ECLK_MUX 42
+#define EMMC_ECLK_DIV 43
+#define EMMC_ECLK_GATE 44
+#define UART0_APLLDIV 45
+#define UART0_UPLLDIV 46
+#define UART0_ECLK_MUX 47
+#define UART0_ECLK_DIV 48
+#define UART0_ECLK_GATE 49
+#define UART1_APLLDIV 50
+#define UART1_UPLLDIV 51
+#define UART1_ECLK_MUX 52
+#define UART1_ECLK_DIV 53
+#define UART1_ECLK_GATE 54
+#define UART2_APLLDIV 55
+#define UART2_UPLLDIV 56
+#define UART2_ECLK_MUX 57
+#define UART2_ECLK_DIV 58
+#define UART2_ECLK_GATE 59
+#define UART3_APLLDIV 60
+#define UART3_UPLLDIV 61
+#define UART3_ECLK_MUX 62
+#define UART3_ECLK_DIV 63
+#define UART3_ECLK_GATE 64
+#define UART4_APLLDIV 65
+#define UART4_UPLLDIV 66
+#define UART4_ECLK_MUX 67
+#define UART4_ECLK_DIV 68
+#define UART4_ECLK_GATE 69
+#define UART5_APLLDIV 70
+#define UART5_UPLLDIV 71
+#define UART5_ECLK_MUX 72
+#define UART5_ECLK_DIV 73
+#define UART5_ECLK_GATE 74
+#define UART6_APLLDIV 75
+#define UART6_UPLLDIV 76
+#define UART6_ECLK_MUX 77
+#define UART6_ECLK_DIV 78
+#define UART6_ECLK_GATE 79
+#define UART7_APLLDIV 80
+#define UART7_UPLLDIV 81
+#define UART7_ECLK_MUX 82
+#define UART7_ECLK_DIV 83
+#define UART7_ECLK_GATE 84
+#define UART8_APLLDIV 85
+#define UART8_UPLLDIV 86
+#define UART8_ECLK_MUX 87
+#define UART8_ECLK_DIV 88
+#define UART8_ECLK_GATE 89
+#define UART9_APLLDIV 90
+#define UART9_UPLLDIV 91
+#define UART9_ECLK_MUX 92
+#define UART9_ECLK_DIV 93
+#define UART9_ECLK_GATE 94
+#define UART10_APLLDIV 95
+#define UART10_UPLLDIV 96
+#define UART10_ECLK_MUX 97
+#define UART10_ECLK_DIV 98
+#define UART10_ECLK_GATE 99
+#define SYSTEM_APLLDIV 100
+#define SYSTEM_UPLLDIV 101
+#define SYSTEM_ECLK_MUX 102
+#define SYSTEM_ECLK_DIV 103
+#define SYSTEM_ECLK_GATE 104
+#define GPIO_ECLK_MUX 105
+#define GPIO_ECLK_DIV 106
+#define GPIO_ECLK_GATE 107
+#define KPI_ECLK_MUX 108
+#define KPI_ECLK_DIV 109
+#define KPI_ECLK_GATE 110
+#define ETIMER0_ECLK_MUX 111
+#define ETIMER0_ECLK_GATE 12
+#define ETIMER1_ECLK_MUX 113
+#define ETIMER1_ECLK_GATE 114
+#define ETIMER2_ECLK_MUX 115
+#define ETIMER2_ECLK_GATE 116
+#define ETIMER3_ECLK_MUX 117
+#define ETIMER3_ECLK_GATE 118
+#define WWDT_ECLK_MUX 119
+#define WWDT_ECLK_GATE 120
+#define WDT_ECLK_MUX 121
+#define WDT_ECLK_GATE 122
+#define SMC0_ECLK_DIV 123
+#define SMC0_ECLK_GATE 124
+#define SMC0_GATE 125
+#define SMC1_ECLK_DIV 126
+#define SMC1_ECLK_GATE 127
+#define SMC1_GATE 128
+
+/*SYS*/
+
+#define SYS_MUX 129
+#define SYS_DIV 130
+#define CPU_DIV 131
+#define CPU_GATE 132
+#define DDR_GATE 133
+
+/*HCLK*/
+
+#define HCLK_GATE 134
+#define HCLK1_DIV 135
+#define GDMA_GATE 136
+#define EBI_GATE 137
+#define TIC_GATE 138
+#define SRAM_GATE 139
+#define HCLKN_DIV 140
+#define DRAM_GATE 141
+#define HCLK234_DIV 142
+#define USBH_GATE 143
+#define EMAC1_GATE 144
+#define EMAC1_ECLK_DIV 145
+#define EMAC1_ECLK_GATE 146
+#define USBD_GATE 147
+#define FMI_GATE 148
+#define NAND_GATE 149
+#define EMMC_GATE 150
+#define CRYPTO_GATE 151
+#define JPEG_GATE 152
+#define JPEG_ECLK_DIV 153
+#define JPEG_ECLK_GATE 154
+#define GE2D_GATE 155
+#define GE2D_ECLK_DIV 156
+#define GE2D_ECLK_GATE 157
+#define EMAC0_GATE 158
+#define EMAC0_ECLK_DIV 159
+#define EMAC0_ECLK_GATE 160
+#define SDH_GATE 161
+#define AUDIO_GATE 162
+#define LCD_GATE 163
+#define CAP_GATE 164
+#define SENSOR_GATE 165
+
+/*PCLK*/
+
+#define PCLK_DIV 166
+#define PCLK4096_DIV 167
+#define I2C0_GATE 168
+#define I2C1_GATE 169
+#define SPI0_GATE 170
+#define SPI1_GATE 171
+#define UART0_GATE 172
+#define UART1_GATE 173
+#define UART2_GATE 174
+#define UART3_GATE 175
+#define UART4_GATE 176
+#define UART5_GATE 177
+#define UART6_GATE 178
+#define UART7_GATE 179
+#define UART8_GATE 180
+#define UART9_GATE 181
+#define UART10_GATE 182
+#define TIMER0_GATE 183
+#define TIMER1_GATE 184
+#define TIMER2_GATE 185
+#define TIMER3_GATE 186
+#define TIMER4_GATE 187
+#define WDT_GATE 188
+#define RTC_GATE 189
+#define WWDT_GATE 190
+#define GPIO_GATE 191
+#define ADC_GATE 192
+#define KPI_GATE 193
+#define MTPC_GATE 194
+#define PWM_GATE 195
+#define ETIMER0_GATE 196
+#define ETIMER1_GATE 197
+#define ETIMER2_GATE 198
+#define ETIMER3_GATE 199
+#define CAN0_GATE 200
+#define CAN1_GATE 201
+#define NUC970_CLK_MAX 202
+
+#endif
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Wan Zongshun <vw-6ukY98dZOFrYtjvyW6yDsg@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Daniel Lezcano
<daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Wan Zongshun <vw-6ukY98dZOFrYtjvyW6yDsg@public.gmane.org>,
Wan Zongshun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/6] ARM: dts: nuc900: Add nuc970 dts files
Date: Sat, 25 Jun 2016 18:37:18 +0800 [thread overview]
Message-ID: <1466851042-22239-3-git-send-email-vw@iommu.org> (raw)
In-Reply-To: <1466851042-22239-1-git-send-email-vw-6ukY98dZOFrYtjvyW6yDsg@public.gmane.org>
This patch is to add dts support for nuc970 platform.
Signed-off-by: Wan Zongshun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
.../devicetree/bindings/arm/nuvoton/nuc970.txt | 30 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuc970-evb.dts | 20 ++
arch/arm/boot/dts/nuc970.dtsi | 93 ++++++++
include/dt-bindings/clock/nuc970-clock.h | 233 +++++++++++++++++++++
5 files changed, 377 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
create mode 100644 arch/arm/boot/dts/nuc970-evb.dts
create mode 100644 arch/arm/boot/dts/nuc970.dtsi
create mode 100644 include/dt-bindings/clock/nuc970-clock.h
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
new file mode 100644
index 0000000..df8637a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
@@ -0,0 +1,30 @@
+Nuvoton NUC970 SoC platform Device Tree Bindings
+------------------------------------------
+
+Boards with the NUC970 SoC shall have the following properties:
+
+Root node required properties:
+- compatible: Should be "nuvoton,nuc970evb", "nuvoton,nuc970"
+
+Timer required properties:
+- compatible: Should be "nuvoton,tmr"
+- reg: Should contain registers location and length
+- interrupts: hwirq is direct mapping to irq number
+- clocks: phandle to input clock.
+
+Clock required properties:
+- compatible: Should be "nuvoton,clk"
+- reg: Should contain registers location and length
+
+Interrupt-controller required properties
+- compatible: Should be "nuvoton,aic"
+- reg: Should contain registers location and length
+- interrupt-cells: set to 1
+
+GCR register required properties:
+- compatible: Should be "nuvoton,gcr"
+- reg: Should contain registers location and length
+
+Uart required properties:
+- compatible: Should be "nuvoton,nuc970-uart"
+- reg: Should contain registers location and length
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d..c2e2a53 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -891,6 +891,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
aspeed-ast2500-evb.dtb
+dtb-$(CONFIG_SOC_NUC970) += nuc970-evb.dtb
endif
dtstree := $(srctree)/$(src)
diff --git a/arch/arm/boot/dts/nuc970-evb.dts b/arch/arm/boot/dts/nuc970-evb.dts
new file mode 100644
index 0000000..bd56ad1
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970-evb.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "nuc970.dtsi"
+
+/ {
+ model = "NUC970 EVB Board";
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+};
+
diff --git a/arch/arm/boot/dts/nuc970.dtsi b/arch/arm/boot/dts/nuc970.dtsi
new file mode 100644
index 0000000..8a6c225
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/nuc970-clock.h>
+
+/ {
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ reg = <0x00000000 0x04000000>;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ ahb@B0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB0000000 0x9000>;
+ ranges;
+
+ gcr: gcr@B0000000 {
+ compatible = "nuvoton,gcr";
+ reg = <0xB0000000 0x200>;
+ };
+
+ clks: clk@B0000200 {
+ compatible = "nuvoton,clk";
+ reg = <0xB0000200 0x200>;
+ #clock-cells = <1>;
+ };
+
+ };
+
+ apb@B8000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB8000000 0xF000>;
+ ranges;
+
+ aic: interrupt-controller@B8002000 {
+ compatible = "nuvoton,aic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xB8002000 0x1000>;
+ };
+
+
+ tmr@0xB8001000 {
+ compatible = "nuvoton,tmr";
+ reg = <0xB8001000 0x1000>;
+ interrupts = <16>;
+ clocks = <&clks TIMER0_GATE>,
+ <&clks TIMER1_GATE>;
+ clock-names = "timer0", "timer1";
+
+ };
+
+ uart0: serial@B8000000 {
+ compatible = "nuvoton,nuc970-uart";
+ reg = <0xB8000000 0x1000>;
+ interrupts = <36>;
+ clocks = <&clks UART0_GATE>,
+ <&clks UART0_ECLK_GATE>;
+ clock-names = "uart0", "uart0_eclk";
+ clock-frequency = <12000000>;
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/nuc970-clock.h b/include/dt-bindings/clock/nuc970-clock.h
new file mode 100644
index 0000000..cbfcc77
--- /dev/null
+++ b/include/dt-bindings/clock/nuc970-clock.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NUC970_H
+#define __DT_BINDINGS_CLOCK_NUC970_H
+
+/*SOURCE*/
+
+#define XIN 0
+#define APLL 1
+#define UPLL 2
+#define XIN32K 3
+#define XIN128_DIV 4
+
+/*ECLK*/
+
+#define USB_APLLDIV 5
+#define USB_UPLLDIV 6
+#define USB_ECLK_MUX 7
+#define USB_ECLK_DIV 8
+#define USB_ECLK_GATE 9
+#define SD_APLLDIV 10
+#define SD_UPLLDIV 11
+#define SD_ECLK_MUX 12
+#define SD_ECLK_DIV 13
+#define SD_ECLK_GATE 14
+#define LCD_APLLDIV 15
+#define LCD_UPLLDIV 16
+#define LCD_ECLK_MUX 17
+#define LCD_ECLK_DIV 18
+#define LCD_ECLK_GATE 19
+#define ADC_APLLDIV 20
+#define ADC_UPLLDIV 21
+#define ADC_ECLK_MUX 22
+#define ADC_ECLK_DIV 23
+#define ADC_ECLK_GATE 24
+#define AUDIO_APLLDIV 25
+#define AUDIO_UPLLDIV 26
+#define AUDIO_ECLK_MUX 27
+#define AUDIO_ECLK_DIV 28
+#define AUDIO_ECLK_GATE 29
+#define CAP_APLLDIV 30
+#define CAP_UPLLDIV 31
+#define CAP_ECLK_MUX 32
+#define CAP_ECLK_DIV 33
+#define CAP_ECLK_GATE 34
+#define SDH_APLLDIV 35
+#define SDH_UPLLDIV 36
+#define SDH_ECLK_MUX 37
+#define SDH_ECLK_DIV 38
+#define SDH_ECLK_GATE 39
+#define EMMC_APLLDIV 40
+#define EMMC_UPLLDIV 41
+#define EMMC_ECLK_MUX 42
+#define EMMC_ECLK_DIV 43
+#define EMMC_ECLK_GATE 44
+#define UART0_APLLDIV 45
+#define UART0_UPLLDIV 46
+#define UART0_ECLK_MUX 47
+#define UART0_ECLK_DIV 48
+#define UART0_ECLK_GATE 49
+#define UART1_APLLDIV 50
+#define UART1_UPLLDIV 51
+#define UART1_ECLK_MUX 52
+#define UART1_ECLK_DIV 53
+#define UART1_ECLK_GATE 54
+#define UART2_APLLDIV 55
+#define UART2_UPLLDIV 56
+#define UART2_ECLK_MUX 57
+#define UART2_ECLK_DIV 58
+#define UART2_ECLK_GATE 59
+#define UART3_APLLDIV 60
+#define UART3_UPLLDIV 61
+#define UART3_ECLK_MUX 62
+#define UART3_ECLK_DIV 63
+#define UART3_ECLK_GATE 64
+#define UART4_APLLDIV 65
+#define UART4_UPLLDIV 66
+#define UART4_ECLK_MUX 67
+#define UART4_ECLK_DIV 68
+#define UART4_ECLK_GATE 69
+#define UART5_APLLDIV 70
+#define UART5_UPLLDIV 71
+#define UART5_ECLK_MUX 72
+#define UART5_ECLK_DIV 73
+#define UART5_ECLK_GATE 74
+#define UART6_APLLDIV 75
+#define UART6_UPLLDIV 76
+#define UART6_ECLK_MUX 77
+#define UART6_ECLK_DIV 78
+#define UART6_ECLK_GATE 79
+#define UART7_APLLDIV 80
+#define UART7_UPLLDIV 81
+#define UART7_ECLK_MUX 82
+#define UART7_ECLK_DIV 83
+#define UART7_ECLK_GATE 84
+#define UART8_APLLDIV 85
+#define UART8_UPLLDIV 86
+#define UART8_ECLK_MUX 87
+#define UART8_ECLK_DIV 88
+#define UART8_ECLK_GATE 89
+#define UART9_APLLDIV 90
+#define UART9_UPLLDIV 91
+#define UART9_ECLK_MUX 92
+#define UART9_ECLK_DIV 93
+#define UART9_ECLK_GATE 94
+#define UART10_APLLDIV 95
+#define UART10_UPLLDIV 96
+#define UART10_ECLK_MUX 97
+#define UART10_ECLK_DIV 98
+#define UART10_ECLK_GATE 99
+#define SYSTEM_APLLDIV 100
+#define SYSTEM_UPLLDIV 101
+#define SYSTEM_ECLK_MUX 102
+#define SYSTEM_ECLK_DIV 103
+#define SYSTEM_ECLK_GATE 104
+#define GPIO_ECLK_MUX 105
+#define GPIO_ECLK_DIV 106
+#define GPIO_ECLK_GATE 107
+#define KPI_ECLK_MUX 108
+#define KPI_ECLK_DIV 109
+#define KPI_ECLK_GATE 110
+#define ETIMER0_ECLK_MUX 111
+#define ETIMER0_ECLK_GATE 12
+#define ETIMER1_ECLK_MUX 113
+#define ETIMER1_ECLK_GATE 114
+#define ETIMER2_ECLK_MUX 115
+#define ETIMER2_ECLK_GATE 116
+#define ETIMER3_ECLK_MUX 117
+#define ETIMER3_ECLK_GATE 118
+#define WWDT_ECLK_MUX 119
+#define WWDT_ECLK_GATE 120
+#define WDT_ECLK_MUX 121
+#define WDT_ECLK_GATE 122
+#define SMC0_ECLK_DIV 123
+#define SMC0_ECLK_GATE 124
+#define SMC0_GATE 125
+#define SMC1_ECLK_DIV 126
+#define SMC1_ECLK_GATE 127
+#define SMC1_GATE 128
+
+/*SYS*/
+
+#define SYS_MUX 129
+#define SYS_DIV 130
+#define CPU_DIV 131
+#define CPU_GATE 132
+#define DDR_GATE 133
+
+/*HCLK*/
+
+#define HCLK_GATE 134
+#define HCLK1_DIV 135
+#define GDMA_GATE 136
+#define EBI_GATE 137
+#define TIC_GATE 138
+#define SRAM_GATE 139
+#define HCLKN_DIV 140
+#define DRAM_GATE 141
+#define HCLK234_DIV 142
+#define USBH_GATE 143
+#define EMAC1_GATE 144
+#define EMAC1_ECLK_DIV 145
+#define EMAC1_ECLK_GATE 146
+#define USBD_GATE 147
+#define FMI_GATE 148
+#define NAND_GATE 149
+#define EMMC_GATE 150
+#define CRYPTO_GATE 151
+#define JPEG_GATE 152
+#define JPEG_ECLK_DIV 153
+#define JPEG_ECLK_GATE 154
+#define GE2D_GATE 155
+#define GE2D_ECLK_DIV 156
+#define GE2D_ECLK_GATE 157
+#define EMAC0_GATE 158
+#define EMAC0_ECLK_DIV 159
+#define EMAC0_ECLK_GATE 160
+#define SDH_GATE 161
+#define AUDIO_GATE 162
+#define LCD_GATE 163
+#define CAP_GATE 164
+#define SENSOR_GATE 165
+
+/*PCLK*/
+
+#define PCLK_DIV 166
+#define PCLK4096_DIV 167
+#define I2C0_GATE 168
+#define I2C1_GATE 169
+#define SPI0_GATE 170
+#define SPI1_GATE 171
+#define UART0_GATE 172
+#define UART1_GATE 173
+#define UART2_GATE 174
+#define UART3_GATE 175
+#define UART4_GATE 176
+#define UART5_GATE 177
+#define UART6_GATE 178
+#define UART7_GATE 179
+#define UART8_GATE 180
+#define UART9_GATE 181
+#define UART10_GATE 182
+#define TIMER0_GATE 183
+#define TIMER1_GATE 184
+#define TIMER2_GATE 185
+#define TIMER3_GATE 186
+#define TIMER4_GATE 187
+#define WDT_GATE 188
+#define RTC_GATE 189
+#define WWDT_GATE 190
+#define GPIO_GATE 191
+#define ADC_GATE 192
+#define KPI_GATE 193
+#define MTPC_GATE 194
+#define PWM_GATE 195
+#define ETIMER0_GATE 196
+#define ETIMER1_GATE 197
+#define ETIMER2_GATE 198
+#define ETIMER3_GATE 199
+#define CAN0_GATE 200
+#define CAN1_GATE 201
+#define NUC970_CLK_MAX 202
+
+#endif
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: vw@iommu.org (Wan Zongshun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] ARM: dts: nuc900: Add nuc970 dts files
Date: Sat, 25 Jun 2016 18:37:18 +0800 [thread overview]
Message-ID: <1466851042-22239-3-git-send-email-vw@iommu.org> (raw)
In-Reply-To: <1466851042-22239-1-git-send-email-vw@iommu.org>
This patch is to add dts support for nuc970 platform.
Signed-off-by: Wan Zongshun <mcuos.com@gmail.com>
---
.../devicetree/bindings/arm/nuvoton/nuc970.txt | 30 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuc970-evb.dts | 20 ++
arch/arm/boot/dts/nuc970.dtsi | 93 ++++++++
include/dt-bindings/clock/nuc970-clock.h | 233 +++++++++++++++++++++
5 files changed, 377 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
create mode 100644 arch/arm/boot/dts/nuc970-evb.dts
create mode 100644 arch/arm/boot/dts/nuc970.dtsi
create mode 100644 include/dt-bindings/clock/nuc970-clock.h
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
new file mode 100644
index 0000000..df8637a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
@@ -0,0 +1,30 @@
+Nuvoton NUC970 SoC platform Device Tree Bindings
+------------------------------------------
+
+Boards with the NUC970 SoC shall have the following properties:
+
+Root node required properties:
+- compatible: Should be "nuvoton,nuc970evb", "nuvoton,nuc970"
+
+Timer required properties:
+- compatible: Should be "nuvoton,tmr"
+- reg: Should contain registers location and length
+- interrupts: hwirq is direct mapping to irq number
+- clocks: phandle to input clock.
+
+Clock required properties:
+- compatible: Should be "nuvoton,clk"
+- reg: Should contain registers location and length
+
+Interrupt-controller required properties
+- compatible: Should be "nuvoton,aic"
+- reg: Should contain registers location and length
+- interrupt-cells: set to 1
+
+GCR register required properties:
+- compatible: Should be "nuvoton,gcr"
+- reg: Should contain registers location and length
+
+Uart required properties:
+- compatible: Should be "nuvoton,nuc970-uart"
+- reg: Should contain registers location and length
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d..c2e2a53 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -891,6 +891,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
aspeed-ast2500-evb.dtb
+dtb-$(CONFIG_SOC_NUC970) += nuc970-evb.dtb
endif
dtstree := $(srctree)/$(src)
diff --git a/arch/arm/boot/dts/nuc970-evb.dts b/arch/arm/boot/dts/nuc970-evb.dts
new file mode 100644
index 0000000..bd56ad1
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970-evb.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "nuc970.dtsi"
+
+/ {
+ model = "NUC970 EVB Board";
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+};
+
diff --git a/arch/arm/boot/dts/nuc970.dtsi b/arch/arm/boot/dts/nuc970.dtsi
new file mode 100644
index 0000000..8a6c225
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/nuc970-clock.h>
+
+/ {
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ reg = <0x00000000 0x04000000>;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ ahb at B0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB0000000 0x9000>;
+ ranges;
+
+ gcr: gcr at B0000000 {
+ compatible = "nuvoton,gcr";
+ reg = <0xB0000000 0x200>;
+ };
+
+ clks: clk at B0000200 {
+ compatible = "nuvoton,clk";
+ reg = <0xB0000200 0x200>;
+ #clock-cells = <1>;
+ };
+
+ };
+
+ apb at B8000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB8000000 0xF000>;
+ ranges;
+
+ aic: interrupt-controller at B8002000 {
+ compatible = "nuvoton,aic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xB8002000 0x1000>;
+ };
+
+
+ tmr at 0xB8001000 {
+ compatible = "nuvoton,tmr";
+ reg = <0xB8001000 0x1000>;
+ interrupts = <16>;
+ clocks = <&clks TIMER0_GATE>,
+ <&clks TIMER1_GATE>;
+ clock-names = "timer0", "timer1";
+
+ };
+
+ uart0: serial at B8000000 {
+ compatible = "nuvoton,nuc970-uart";
+ reg = <0xB8000000 0x1000>;
+ interrupts = <36>;
+ clocks = <&clks UART0_GATE>,
+ <&clks UART0_ECLK_GATE>;
+ clock-names = "uart0", "uart0_eclk";
+ clock-frequency = <12000000>;
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/nuc970-clock.h b/include/dt-bindings/clock/nuc970-clock.h
new file mode 100644
index 0000000..cbfcc77
--- /dev/null
+++ b/include/dt-bindings/clock/nuc970-clock.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NUC970_H
+#define __DT_BINDINGS_CLOCK_NUC970_H
+
+/*SOURCE*/
+
+#define XIN 0
+#define APLL 1
+#define UPLL 2
+#define XIN32K 3
+#define XIN128_DIV 4
+
+/*ECLK*/
+
+#define USB_APLLDIV 5
+#define USB_UPLLDIV 6
+#define USB_ECLK_MUX 7
+#define USB_ECLK_DIV 8
+#define USB_ECLK_GATE 9
+#define SD_APLLDIV 10
+#define SD_UPLLDIV 11
+#define SD_ECLK_MUX 12
+#define SD_ECLK_DIV 13
+#define SD_ECLK_GATE 14
+#define LCD_APLLDIV 15
+#define LCD_UPLLDIV 16
+#define LCD_ECLK_MUX 17
+#define LCD_ECLK_DIV 18
+#define LCD_ECLK_GATE 19
+#define ADC_APLLDIV 20
+#define ADC_UPLLDIV 21
+#define ADC_ECLK_MUX 22
+#define ADC_ECLK_DIV 23
+#define ADC_ECLK_GATE 24
+#define AUDIO_APLLDIV 25
+#define AUDIO_UPLLDIV 26
+#define AUDIO_ECLK_MUX 27
+#define AUDIO_ECLK_DIV 28
+#define AUDIO_ECLK_GATE 29
+#define CAP_APLLDIV 30
+#define CAP_UPLLDIV 31
+#define CAP_ECLK_MUX 32
+#define CAP_ECLK_DIV 33
+#define CAP_ECLK_GATE 34
+#define SDH_APLLDIV 35
+#define SDH_UPLLDIV 36
+#define SDH_ECLK_MUX 37
+#define SDH_ECLK_DIV 38
+#define SDH_ECLK_GATE 39
+#define EMMC_APLLDIV 40
+#define EMMC_UPLLDIV 41
+#define EMMC_ECLK_MUX 42
+#define EMMC_ECLK_DIV 43
+#define EMMC_ECLK_GATE 44
+#define UART0_APLLDIV 45
+#define UART0_UPLLDIV 46
+#define UART0_ECLK_MUX 47
+#define UART0_ECLK_DIV 48
+#define UART0_ECLK_GATE 49
+#define UART1_APLLDIV 50
+#define UART1_UPLLDIV 51
+#define UART1_ECLK_MUX 52
+#define UART1_ECLK_DIV 53
+#define UART1_ECLK_GATE 54
+#define UART2_APLLDIV 55
+#define UART2_UPLLDIV 56
+#define UART2_ECLK_MUX 57
+#define UART2_ECLK_DIV 58
+#define UART2_ECLK_GATE 59
+#define UART3_APLLDIV 60
+#define UART3_UPLLDIV 61
+#define UART3_ECLK_MUX 62
+#define UART3_ECLK_DIV 63
+#define UART3_ECLK_GATE 64
+#define UART4_APLLDIV 65
+#define UART4_UPLLDIV 66
+#define UART4_ECLK_MUX 67
+#define UART4_ECLK_DIV 68
+#define UART4_ECLK_GATE 69
+#define UART5_APLLDIV 70
+#define UART5_UPLLDIV 71
+#define UART5_ECLK_MUX 72
+#define UART5_ECLK_DIV 73
+#define UART5_ECLK_GATE 74
+#define UART6_APLLDIV 75
+#define UART6_UPLLDIV 76
+#define UART6_ECLK_MUX 77
+#define UART6_ECLK_DIV 78
+#define UART6_ECLK_GATE 79
+#define UART7_APLLDIV 80
+#define UART7_UPLLDIV 81
+#define UART7_ECLK_MUX 82
+#define UART7_ECLK_DIV 83
+#define UART7_ECLK_GATE 84
+#define UART8_APLLDIV 85
+#define UART8_UPLLDIV 86
+#define UART8_ECLK_MUX 87
+#define UART8_ECLK_DIV 88
+#define UART8_ECLK_GATE 89
+#define UART9_APLLDIV 90
+#define UART9_UPLLDIV 91
+#define UART9_ECLK_MUX 92
+#define UART9_ECLK_DIV 93
+#define UART9_ECLK_GATE 94
+#define UART10_APLLDIV 95
+#define UART10_UPLLDIV 96
+#define UART10_ECLK_MUX 97
+#define UART10_ECLK_DIV 98
+#define UART10_ECLK_GATE 99
+#define SYSTEM_APLLDIV 100
+#define SYSTEM_UPLLDIV 101
+#define SYSTEM_ECLK_MUX 102
+#define SYSTEM_ECLK_DIV 103
+#define SYSTEM_ECLK_GATE 104
+#define GPIO_ECLK_MUX 105
+#define GPIO_ECLK_DIV 106
+#define GPIO_ECLK_GATE 107
+#define KPI_ECLK_MUX 108
+#define KPI_ECLK_DIV 109
+#define KPI_ECLK_GATE 110
+#define ETIMER0_ECLK_MUX 111
+#define ETIMER0_ECLK_GATE 12
+#define ETIMER1_ECLK_MUX 113
+#define ETIMER1_ECLK_GATE 114
+#define ETIMER2_ECLK_MUX 115
+#define ETIMER2_ECLK_GATE 116
+#define ETIMER3_ECLK_MUX 117
+#define ETIMER3_ECLK_GATE 118
+#define WWDT_ECLK_MUX 119
+#define WWDT_ECLK_GATE 120
+#define WDT_ECLK_MUX 121
+#define WDT_ECLK_GATE 122
+#define SMC0_ECLK_DIV 123
+#define SMC0_ECLK_GATE 124
+#define SMC0_GATE 125
+#define SMC1_ECLK_DIV 126
+#define SMC1_ECLK_GATE 127
+#define SMC1_GATE 128
+
+/*SYS*/
+
+#define SYS_MUX 129
+#define SYS_DIV 130
+#define CPU_DIV 131
+#define CPU_GATE 132
+#define DDR_GATE 133
+
+/*HCLK*/
+
+#define HCLK_GATE 134
+#define HCLK1_DIV 135
+#define GDMA_GATE 136
+#define EBI_GATE 137
+#define TIC_GATE 138
+#define SRAM_GATE 139
+#define HCLKN_DIV 140
+#define DRAM_GATE 141
+#define HCLK234_DIV 142
+#define USBH_GATE 143
+#define EMAC1_GATE 144
+#define EMAC1_ECLK_DIV 145
+#define EMAC1_ECLK_GATE 146
+#define USBD_GATE 147
+#define FMI_GATE 148
+#define NAND_GATE 149
+#define EMMC_GATE 150
+#define CRYPTO_GATE 151
+#define JPEG_GATE 152
+#define JPEG_ECLK_DIV 153
+#define JPEG_ECLK_GATE 154
+#define GE2D_GATE 155
+#define GE2D_ECLK_DIV 156
+#define GE2D_ECLK_GATE 157
+#define EMAC0_GATE 158
+#define EMAC0_ECLK_DIV 159
+#define EMAC0_ECLK_GATE 160
+#define SDH_GATE 161
+#define AUDIO_GATE 162
+#define LCD_GATE 163
+#define CAP_GATE 164
+#define SENSOR_GATE 165
+
+/*PCLK*/
+
+#define PCLK_DIV 166
+#define PCLK4096_DIV 167
+#define I2C0_GATE 168
+#define I2C1_GATE 169
+#define SPI0_GATE 170
+#define SPI1_GATE 171
+#define UART0_GATE 172
+#define UART1_GATE 173
+#define UART2_GATE 174
+#define UART3_GATE 175
+#define UART4_GATE 176
+#define UART5_GATE 177
+#define UART6_GATE 178
+#define UART7_GATE 179
+#define UART8_GATE 180
+#define UART9_GATE 181
+#define UART10_GATE 182
+#define TIMER0_GATE 183
+#define TIMER1_GATE 184
+#define TIMER2_GATE 185
+#define TIMER3_GATE 186
+#define TIMER4_GATE 187
+#define WDT_GATE 188
+#define RTC_GATE 189
+#define WWDT_GATE 190
+#define GPIO_GATE 191
+#define ADC_GATE 192
+#define KPI_GATE 193
+#define MTPC_GATE 194
+#define PWM_GATE 195
+#define ETIMER0_GATE 196
+#define ETIMER1_GATE 197
+#define ETIMER2_GATE 198
+#define ETIMER3_GATE 199
+#define CAN0_GATE 200
+#define CAN1_GATE 201
+#define NUC970_CLK_MAX 202
+
+#endif
--
2.7.4
next prev parent reply other threads:[~2016-06-25 10:37 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-25 10:37 [PATCH 0/6] ARM: NUC900: Add NUC970 SoC support Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-25 10:37 ` [PATCH 1/6] ARM: NUC900: Add nuc970 machine support Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-29 15:19 ` Arnd Bergmann
2016-06-29 15:19 ` Arnd Bergmann
2016-06-29 15:19 ` Arnd Bergmann
2016-07-05 7:38 ` Wan Zongshun
2016-07-05 7:38 ` Wan Zongshun
2016-07-05 7:38 ` Wan Zongshun
2016-07-05 8:09 ` Arnd Bergmann
2016-07-05 8:09 ` Arnd Bergmann
2016-07-05 8:09 ` Arnd Bergmann
2016-06-25 10:37 ` Wan Zongshun [this message]
2016-06-25 10:37 ` [PATCH 2/6] ARM: dts: nuc900: Add nuc970 dts files Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-28 20:56 ` Rob Herring
2016-06-28 20:56 ` Rob Herring
2016-06-29 15:24 ` Arnd Bergmann
2016-06-29 15:24 ` Arnd Bergmann
2016-06-29 15:24 ` Arnd Bergmann
2016-06-25 10:37 ` [PATCH 3/6] Clocksource: add nuc970 clocksource driver Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-27 19:46 ` Daniel Lezcano
2016-06-27 19:46 ` Daniel Lezcano
2016-06-27 19:46 ` Daniel Lezcano
2016-07-05 8:21 ` Wan Zongshun
2016-07-05 8:21 ` Wan Zongshun
2016-07-05 8:21 ` Wan Zongshun
2016-07-05 10:03 ` Daniel Lezcano
2016-07-05 10:03 ` Daniel Lezcano
2016-07-05 10:03 ` Daniel Lezcano
2016-06-29 15:25 ` Arnd Bergmann
2016-06-29 15:25 ` Arnd Bergmann
2016-06-29 15:25 ` Arnd Bergmann
2016-06-29 16:10 ` Daniel Lezcano
2016-06-29 16:10 ` Daniel Lezcano
2016-06-29 16:10 ` Daniel Lezcano
2016-07-05 7:43 ` Wan Zongshun
2016-07-05 7:43 ` Wan Zongshun
2016-07-05 7:43 ` Wan Zongshun
2016-06-25 10:37 ` [PATCH 4/6] irqchip: add irqchip driver for nuc900 Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-29 15:27 ` Arnd Bergmann
2016-06-29 15:27 ` Arnd Bergmann
2016-06-29 15:27 ` Arnd Bergmann
2016-07-05 7:47 ` Wan Zongshun
2016-07-05 7:47 ` Wan Zongshun
2016-07-05 8:09 ` Arnd Bergmann
2016-07-05 8:09 ` Arnd Bergmann
2016-07-05 8:09 ` Arnd Bergmann
2016-07-09 3:25 ` Wan Zongshun
2016-07-09 3:25 ` Wan Zongshun
2016-07-09 20:17 ` Arnd Bergmann
2016-07-09 20:17 ` Arnd Bergmann
2016-07-09 20:17 ` Arnd Bergmann
2016-07-22 2:37 ` Wan ZongShun
2016-07-22 2:37 ` Wan ZongShun
2016-07-22 2:37 ` Wan ZongShun
2016-06-30 16:30 ` Jason Cooper
2016-06-30 16:30 ` Jason Cooper
2016-06-25 10:37 ` [PATCH 5/6] clk: add Clock driver for nuc970 Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-29 15:28 ` Arnd Bergmann
2016-06-29 15:28 ` Arnd Bergmann
2016-06-29 15:28 ` Arnd Bergmann
2016-06-25 10:37 ` [PATCH 6/6] nuc900: add nuc970 platform defconfig file Wan Zongshun
2016-06-25 10:37 ` Wan Zongshun
2016-06-29 15:29 ` Arnd Bergmann
2016-06-29 15:29 ` Arnd Bergmann
2016-06-29 15:29 ` Arnd Bergmann
2016-06-29 15:32 ` [PATCH 0/6] ARM: NUC900: Add NUC970 SoC support Arnd Bergmann
2016-06-29 15:32 ` Arnd Bergmann
2016-06-29 15:32 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466851042-22239-3-git-send-email-vw@iommu.org \
--to=vw@iommu.org \
--cc=arnd@arndb.de \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mcuos.com@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.