[Qemu-devel] [PULL 0/2] target-mips queue

[Qemu-devel] [PULL 0/2] target-mips queue

[Leon Alrae]

Hi,

Just a couple of bug fixes for rc1.

Thanks,
Leon

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>

The following changes since commit 21a21b853a1bb606358af61e738abfb9aecbd720:

  Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging (2016-07-27 18:18:21 +0100)

are available in the git repository at:

  git://github.com/lalrae/qemu.git tags/mips-20160729

for you to fetch changes up to 701074a6fc7470d0ed54e4a4bcd4d491ad8da22e:

  target-mips: fix EntryHi.EHINV being cleared on TLB exception (2016-07-28 11:24:02 +0100)

----------------------------------------------------------------
MIPS patches 2016-07-29

Changes:
* bug fixes

----------------------------------------------------------------
Leon Alrae (1):
      target-mips: fix EntryHi.EHINV being cleared on TLB exception

Paul Burton (1):
      hw/mips_malta: Fix YAMON API print routine

 hw/mips/mips_malta.c | 2 +-
 target-mips/helper.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

[Qemu-devel] [PULL 1/2] hw/mips_malta: Fix YAMON API print routine

[Leon Alrae]

From: Paul Burton <paul.burton@imgtec.com>

The print routine provided as part of the in-built bootloader had a bug
in that it attempted to use a jump instruction as part of a loop, but
the target has its upper bits zeroed leading to control flow
transferring to 0xb0000814 rather than the intended 0xbfc00814. Fix this
by using a branch instruction instead, which seems more fit for purpose.

A simple way to test this is to build a Linux kernel with EVA enabled &
attempt to boot it in QEMU. It will attempt to print a message
indicating the configuration mismatch but QEMU would previously
incorrectly jump & wind up printing a continuous stream of the letter E.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
---
 hw/mips/mips_malta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index 34d41ef..e90857e 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -727,7 +727,7 @@ static void write_bootloader(uint8_t *base, int64_t run_addr,
     stl_p(p++, 0x00000000);                                     /* nop */
     stl_p(p++, 0x0ff0021c);                                     /* jal 870 */
     stl_p(p++, 0x00000000);                                     /* nop */
-    stl_p(p++, 0x08000205);                                     /* j 814 */
+    stl_p(p++, 0x1000fff9);                                     /* b 814 */
     stl_p(p++, 0x00000000);                                     /* nop */
     stl_p(p++, 0x01a00009);                                     /* jalr t5 */
     stl_p(p++, 0x01602021);                                     /* move a0,t3 */
-- 
2.7.4

[Qemu-devel] [PULL 2/2] target-mips: fix EntryHi.EHINV being cleared on TLB exception

[Leon Alrae]

While implementing TLB invalidation feature we forgot to modify
part of code responsible for updating EntryHi during TLB exception.
Consequently EntryHi.EHINV is unexpectedly cleared on the exception.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
---
 target-mips/helper.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/target-mips/helper.c b/target-mips/helper.c
index 9fbca26..c864b15 100644
--- a/target-mips/helper.c
+++ b/target-mips/helper.c
@@ -396,6 +396,7 @@ static void raise_mmu_exception(CPUMIPSState *env, target_ulong address,
     env->CP0_Context = (env->CP0_Context & ~0x007fffff) |
                        ((address >> 9) & 0x007ffff0);
     env->CP0_EntryHi = (env->CP0_EntryHi & env->CP0_EntryHi_ASID_mask) |
+                       (env->CP0_EntryHi & (1 << CP0EnHi_EHINV)) |
                        (address & (TARGET_PAGE_MASK << 1));
 #if defined(TARGET_MIPS64)
     env->CP0_EntryHi &= env->SEGMask;
-- 
2.7.4

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 29 July 2016 at 10:11, Leon Alrae <leon.alrae@imgtec.com> wrote:
> Hi,
>
> Just a couple of bug fixes for rc1.
>
> Thanks,
> Leon
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> Cc: Aurelien Jarno <aurelien@aurel32.net>
>
> The following changes since commit 21a21b853a1bb606358af61e738abfb9aecbd720:
>
>   Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging (2016-07-27 18:18:21 +0100)
>
> are available in the git repository at:
>
>   git://github.com/lalrae/qemu.git tags/mips-20160729
>
> for you to fetch changes up to 701074a6fc7470d0ed54e4a4bcd4d491ad8da22e:
>
>   target-mips: fix EntryHi.EHINV being cleared on TLB exception (2016-07-28 11:24:02 +0100)
>
> ----------------------------------------------------------------
> MIPS patches 2016-07-29
>
> Changes:
> * bug fixes

Applied, thanks.

-- PMM

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 28 July 2017 at 14:07, Yongbok Kim <yongbok.kim@imgtec.com> wrote:
> The following changes since commit 871a0f7ad2b9560c5f7d640125c5be95ca23ca7f:
>
>   Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170728' into staging (2017-07-28 10:35:02 +0100)
>
> are available in the git repository at:
>
>   git://github.com/yongbok/upstream-qemu.git tags/mips-20170728
>
> for you to fetch changes up to 665df9010aa40d1e028d6ad5d3bdb4d9b0a3294c:
>
>   Revert "elf-loader: warn about invalid endianness" (2017-07-28 13:32:32 +0100)
>
> ----------------------------------------------------------------
> MIPS patches 2017-07-28
>
> Changes:
> * Improve ths MIPS board kernel load error reporting
> * Revert unnecessary warning messages
>
> ----------------------------------------------------------------
>
> Alexey Kardashevskiy (1):
>   Revert "elf-loader: warn about invalid endianness"
>
> Aurelien Jarno (1):
>   hw/mips: load_elf_strerror to report kernel loading failure
>

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/2] target-mips queue

[Yongbok Kim]

The following changes since commit 871a0f7ad2b9560c5f7d640125c5be95ca23ca7f:

  Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170728' into staging (2017-07-28 10:35:02 +0100)

are available in the git repository at:

  git://github.com/yongbok/upstream-qemu.git tags/mips-20170728

for you to fetch changes up to 665df9010aa40d1e028d6ad5d3bdb4d9b0a3294c:

  Revert "elf-loader: warn about invalid endianness" (2017-07-28 13:32:32 +0100)

----------------------------------------------------------------
MIPS patches 2017-07-28

Changes:
* Improve ths MIPS board kernel load error reporting
* Revert unnecessary warning messages

----------------------------------------------------------------

Alexey Kardashevskiy (1):
  Revert "elf-loader: warn about invalid endianness"

Aurelien Jarno (1):
  hw/mips: load_elf_strerror to report kernel loading failure

 hw/core/loader.c        |  1 -
 hw/mips/mips_fulong2e.c | 15 +++++++++------
 hw/mips/mips_malta.c    | 14 ++++++++------
 hw/mips/mips_mipssim.c  |  5 +++--
 hw/mips/mips_r4k.c      |  6 ++++--
 5 files changed, 24 insertions(+), 17 deletions(-)

-- 
2.7.4

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 11 July 2017 at 16:16, Yongbok Kim <yongbok.kim@imgtec.com> wrote:
> The following changes since commit b5ed2e11ef39a308dcbef46f66774557b4a41fce:
>
>   build: disable Xen on ARM (2017-07-11 11:23:47 +0100)
>
> are available in the git repository at:
>
>   git://github.com/yongbok/upstream-qemu.git tags/mips-20170711
>
> for you to fetch changes up to 9768e2abf7ca3ef181f7cec134d7305c1643f78a:
>
>   mips/malta: load the initrd at the end of the low memory (2017-07-11 15:06:34 +0100)
>
> ----------------------------------------------------------------
> MIPS patches 2017-07-11
>
> Changes:
> * Fix MSA copy_[s|u]_df corner case of rd = 0
> * Update malta to load the initrd at the end of the low memory
>
> ----------------------------------------------------------------
>
> Aurelien Jarno (1):
>   mips/malta: load the initrd at the end of the low memory
>
> Miodrag Dinic (1):
>   target/mips: fix msa copy_[s|u]_df rd = 0 corner case
>
>  hw/mips/mips_malta.c    | 5 +++--
>  target/mips/translate.c | 8 ++++++--
>  2 files changed, 9 insertions(+), 4 deletions(-)

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/2] target-mips queue

[Yongbok Kim]

The following changes since commit b5ed2e11ef39a308dcbef46f66774557b4a41fce:

  build: disable Xen on ARM (2017-07-11 11:23:47 +0100)

are available in the git repository at:

  git://github.com/yongbok/upstream-qemu.git tags/mips-20170711

for you to fetch changes up to 9768e2abf7ca3ef181f7cec134d7305c1643f78a:

  mips/malta: load the initrd at the end of the low memory (2017-07-11 15:06:34 +0100)

----------------------------------------------------------------
MIPS patches 2017-07-11

Changes:
* Fix MSA copy_[s|u]_df corner case of rd = 0
* Update malta to load the initrd at the end of the low memory

----------------------------------------------------------------

Aurelien Jarno (1):
  mips/malta: load the initrd at the end of the low memory

Miodrag Dinic (1):
  target/mips: fix msa copy_[s|u]_df rd = 0 corner case

 hw/mips/mips_malta.c    | 5 +++--
 target/mips/translate.c | 8 ++++++--
 2 files changed, 9 insertions(+), 4 deletions(-)

-- 
2.7.4

[Qemu-devel] [PULL 0/2] target-mips queue

[Yongbok Kim]

The following changes since commit 10f25e4844cb9b3f02fb032f88051dd5b65b4206:

  Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170222' into staging (2017-02-23 09:59:40 +0000)

are available in the git repository at:

  git://github.com/yongbok/upstream-qemu.git tags/mips-20170224

for you to fetch changes up to 0288d4485392832b25e40551433377a36d56dd8c:

  hw/mips: MIPS Boston board support (2017-02-24 00:04:32 +0000)

----------------------------------------------------------------
MIPS patches 2017-02-24

Changes:
* Revert the boston model commit which breaks "make check" on 32-bit hosts
* Add the boston model with fixing the issue.

----------------------------------------------------------------

Paul Burton (1):
  hw/mips: MIPS Boston board support

Yongbok Kim (1):
  Revert "hw/mips: MIPS Boston board support"

 hw/mips/boston.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-- 
2.7.4

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 30 September 2016 at 01:16, Yongbok Kim <yongbok.kim@imgtec.com> wrote:
>>
>> Your GPG key hasn't been signed by anybody -- are you in a position
>> to get it signed by somebody else who can in-person verify your identity
>> (eg Leon)?
>
> Hi Peter,
>
> We have just arranged the key signing and Leon has signed my key.

Thanks; I have applied the pull request to master.

-- PMM

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Yongbok Kim]

> 
> Your GPG key hasn't been signed by anybody -- are you in a position
> to get it signed by somebody else who can in-person verify your identity
> (eg Leon)?
> 
> thanks
> -- PMM
> 

Hi Peter,

We have just arranged the key signing and Leon has signed my key.

Thanks,
Yongbok

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 29 September 2016 at 06:19, Yongbok Kim <yongbok.kim@imgtec.com> wrote:
> Hi,
>
> This is my first pull-req for MIPS.
>
> Thanks,
> Yongbok
>
> The following changes since commit c640f2849ee8775fe1bbd7a2772610aa77816f9f:
>
>   Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging (2016-09-28 23:02:56 +0100)
>
> are available in the git repository at:
>
>   git://github.com/yongbok/upstream-qemu.git tags/mips-20160929
>
> for you to fetch changes up to 73bfa8c0e0295df92d5fe61e0149db7b36cdc0c4:
>
>   hw/dma: vmstateify rc4030 (2016-09-29 12:07:51 +0100)
>
> ----------------------------------------------------------------
> MIPS patches 2016-09-29
>
> Changes:
> * MIPS Maintainer update
> * vmstateify rc4030

Your GPG key hasn't been signed by anybody -- are you in a position
to get it signed by somebody else who can in-person verify your identity
(eg Leon)?

thanks
-- PMM

[Qemu-devel] [PULL 0/2] target-mips queue

[Yongbok Kim]

Hi, 

This is my first pull-req for MIPS.

Thanks,
Yongbok

The following changes since commit c640f2849ee8775fe1bbd7a2772610aa77816f9f:

  Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging (2016-09-28 23:02:56 +0100)

are available in the git repository at:

  git://github.com/yongbok/upstream-qemu.git tags/mips-20160929

for you to fetch changes up to 73bfa8c0e0295df92d5fe61e0149db7b36cdc0c4:

  hw/dma: vmstateify rc4030 (2016-09-29 12:07:51 +0100)

----------------------------------------------------------------
MIPS patches 2016-09-29

Changes:
* MIPS Maintainer update
* vmstateify rc4030

----------------------------------------------------------------
Dr. David Alan Gilbert (1):
      hw/dma: vmstateify rc4030

Leon Alrae (1):
      MAINTAINERS: update target-mips maintainers

 MAINTAINERS     |  2 +-
 hw/dma/rc4030.c | 81 +++++++++++++++++++--------------------------------------
 2 files changed, 28 insertions(+), 55 deletions(-)

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 13 May 2016 at 11:44, Leon Alrae <leon.alrae@imgtec.com> wrote:
> Hi,
>
> Just two patches in the first target-mips pullreq for 2.7.
>
> Thanks,
> Leon
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> Cc: Aurelien Jarno <aurelien@aurel32.net>
>
> The following changes since commit bfc766d38e1fae5767d43845c15c79ac8fa6d6af:
>
>   Update version for v2.6.0 release (2016-05-11 16:44:26 +0100)
>
> are available in the git repository at:
>
>   git://github.com/lalrae/qemu.git tags/mips-20160513
>
> for you to fetch changes up to 7fe91a5b33fe100bbc68ee434f947752c69b3f68:
>
>   hw/display: QOM'ify jazz_led.c (2016-05-13 09:33:38 +0100)
>
> ----------------------------------------------------------------
> MIPS patches 2016-05-13
>
> Changes:
> * fix zeroing CP0.WatchLo registers in soft reset
> * QOMify Jazz led
>
> ----------------------------------------------------------------

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/2] target-mips queue

[Leon Alrae]

Hi,

Just two patches in the first target-mips pullreq for 2.7.

Thanks,
Leon

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>

The following changes since commit bfc766d38e1fae5767d43845c15c79ac8fa6d6af:

  Update version for v2.6.0 release (2016-05-11 16:44:26 +0100)

are available in the git repository at:

  git://github.com/lalrae/qemu.git tags/mips-20160513

for you to fetch changes up to 7fe91a5b33fe100bbc68ee434f947752c69b3f68:

  hw/display: QOM'ify jazz_led.c (2016-05-13 09:33:38 +0100)

----------------------------------------------------------------
MIPS patches 2016-05-13

Changes:
* fix zeroing CP0.WatchLo registers in soft reset
* QOMify Jazz led

----------------------------------------------------------------
Aurelien Jarno (1):
      target-mips: fix call to memset in soft reset code

xiaoqiang.zhao (1):
      hw/display: QOM'ify jazz_led.c

 hw/display/jazz_led.c | 18 +++++++++++-------
 target-mips/helper.c  |  2 +-
 2 files changed, 12 insertions(+), 8 deletions(-)

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 23 March 2016 at 16:54, Leon Alrae <leon.alrae@imgtec.com> wrote:
> Hi,
>
> Just two patches for MIPS. Probably there'll be one more pullreq before
> the hard-freeze adding the initial CPS support.
>
> Thanks,
> Leon
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> Cc: Aurelien Jarno <aurelien@aurel32.net>
>
> The following changes since commit ffa6564c9b13cea4b704e184d29d721f2cb061bb:
>
>   Merge remote-tracking branch 'remotes/weil/tags/pull-wxx-20160322' into staging (2016-03-22 20:27:55 +0000)
>
> are available in the git repository at:
>
>   git://github.com/lalrae/qemu.git tags/mips-20160323
>
> for you to fetch changes up to b7c4ab809a4bfde4ab322b49fbe2e47536da7487:
>
>   default-configs: add mips-softmmu-common.mak (2016-03-23 13:36:56 +0000)
>
> ----------------------------------------------------------------
> MIPS patches 2016-03-23
>
> Changes:
> * add mips-softmmu-common.mak
> * indicate presence of IEEE 754-2008 FPU in MIPS64R6-generic and P5600
>
> ----------------------------------------------------------------


Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/2] target-mips queue

[Leon Alrae]

Hi,

Just two patches for MIPS. Probably there'll be one more pullreq before
the hard-freeze adding the initial CPS support.

Thanks,
Leon

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>

The following changes since commit ffa6564c9b13cea4b704e184d29d721f2cb061bb:

  Merge remote-tracking branch 'remotes/weil/tags/pull-wxx-20160322' into staging (2016-03-22 20:27:55 +0000)

are available in the git repository at:

  git://github.com/lalrae/qemu.git tags/mips-20160323

for you to fetch changes up to b7c4ab809a4bfde4ab322b49fbe2e47536da7487:

  default-configs: add mips-softmmu-common.mak (2016-03-23 13:36:56 +0000)

----------------------------------------------------------------
MIPS patches 2016-03-23

Changes:
* add mips-softmmu-common.mak
* indicate presence of IEEE 754-2008 FPU in MIPS64R6-generic and P5600

----------------------------------------------------------------
Leon Alrae (2):
      target-mips: indicate presence of IEEE 754-2008 FPU in R6/R5+MSA CPUs
      default-configs: add mips-softmmu-common.mak

 default-configs/mips-softmmu-common.mak | 32 ++++++++++++++++++++++++++++++++
 default-configs/mips-softmmu.mak        | 31 +------------------------------
 default-configs/mips64-softmmu.mak      | 31 +------------------------------
 default-configs/mips64el-softmmu.mak    | 31 +------------------------------
 default-configs/mipsel-softmmu.mak      | 31 +------------------------------
 target-mips/cpu.h                       |  3 +++
 target-mips/translate.c                 |  1 +
 target-mips/translate_init.c            | 22 +++++++++++++---------
 8 files changed, 53 insertions(+), 129 deletions(-)
 create mode 100644 default-configs/mips-softmmu-common.mak

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 24 November 2015 at 16:59, Leon Alrae <leon.alrae@imgtec.com> wrote:
> Hi,
>
> Just a couple of MIPS64 64-bit addressing bug fixes for 2.5-rc2.
>
> Thanks,
> Leon
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> Cc: Aurelien Jarno <aurelien@aurel32.net>
>
> The following changes since commit 5522a841cab5f15ac0f8d207b320c21755a7a1a5:
>
>   Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging (2015-11-23 16:07:49 +0000)
>
> are available in the git repository at:
>
>   git://github.com/lalrae/qemu.git tags/mips-20151124
>
> for you to fetch changes up to f93c3a8d0c0c1038dbe1e957eb8ab92671137975:
>
>   target-mips: flush QEMU TLB when disabling 64-bit addressing (2015-11-24 11:01:03 +0000)
>
> ----------------------------------------------------------------
> MIPS patches 2015-11-24
>

Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/2] target-mips queue

[Leon Alrae]

Hi,

Just a couple of MIPS64 64-bit addressing bug fixes for 2.5-rc2.

Thanks,
Leon

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>

The following changes since commit 5522a841cab5f15ac0f8d207b320c21755a7a1a5:

  Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging (2015-11-23 16:07:49 +0000)

are available in the git repository at:

  git://github.com/lalrae/qemu.git tags/mips-20151124

for you to fetch changes up to f93c3a8d0c0c1038dbe1e957eb8ab92671137975:

  target-mips: flush QEMU TLB when disabling 64-bit addressing (2015-11-24 11:01:03 +0000)

----------------------------------------------------------------
MIPS patches 2015-11-24

Changes:
* bugfixes for accessing 64-bit addresses

----------------------------------------------------------------
James Hogan (1):
      target-mips: Fix exceptions while UX=0

Leon Alrae (1):
      target-mips: flush QEMU TLB when disabling 64-bit addressing

 target-mips/cpu.h       | 18 +++++++++++++++++-
 target-mips/helper.c    | 12 ++++++++++++
 target-mips/op_helper.c | 13 -------------
 3 files changed, 29 insertions(+), 14 deletions(-)

Re: [Qemu-devel] [PULL 0/2] target-mips queue

[Peter Maydell]

On 11 March 2015 at 16:15, Leon Alrae <leon.alrae@imgtec.com> wrote:
> Hi,
>
> This pull request contains remaining change for 2.3 which was originally
> submitted before soft-freeze.
>
> Thanks,
> Leon
>
> Cc: Peter Maydell <peter.maydell@linaro.org>
> Cc: Aurelien Jarno <aurelien@aurel32.net>
>
> The following changes since commit 48412371415a260d00fc7fdcdb400da55f268828:
>
>   Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging (2015-03-11 11:12:35 +0000)
>
> are available in the git repository at:
>
>   git://github.com/lalrae/qemu.git tags/mips-20150311
>
> for you to fetch changes up to 644511117e7ca9f26d633a59c202a297113a796c:
>
>   target-mips: add missing MSACSR and restore fp_status and hflags (2015-03-11 14:13:57 +0000)
>
> ----------------------------------------------------------------
> MIPS patches 2015-03-11
>
> Changes:
> * use VMStateDescription for MIPS CPU
>
> ----------------------------------------------------------------
Applied, thanks.

-- PMM

[Qemu-devel] [PULL 0/2] target-mips queue

[Leon Alrae]

Hi,

This pull request contains remaining change for 2.3 which was originally
submitted before soft-freeze.

Thanks,
Leon

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>

The following changes since commit 48412371415a260d00fc7fdcdb400da55f268828:

  Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging (2015-03-11 11:12:35 +0000)

are available in the git repository at:

  git://github.com/lalrae/qemu.git tags/mips-20150311

for you to fetch changes up to 644511117e7ca9f26d633a59c202a297113a796c:

  target-mips: add missing MSACSR and restore fp_status and hflags (2015-03-11 14:13:57 +0000)

----------------------------------------------------------------
MIPS patches 2015-03-11

Changes:
* use VMStateDescription for MIPS CPU

----------------------------------------------------------------
Leon Alrae (2):
      target-mips: replace cpu_save/cpu_load with VMStateDescription
      target-mips: add missing MSACSR and restore fp_status and hflags

 target-mips/cpu-qom.h        |   4 +
 target-mips/cpu.c            |   1 +
 target-mips/cpu.h            |  19 +-
 target-mips/machine.c        | 571 ++++++++++++++++++++-----------------------
 target-mips/msa_helper.c     |  12 +-
 target-mips/translate_init.c |  10 +-
 6 files changed, 288 insertions(+), 329 deletions(-)