All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Griffin <peter.griffin@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@stlinux.com,
	vinod.koul@intel.com, patrice.chotard@st.com,
	dan.j.williams@intel.com, airlied@linux.ie, kraxel@redhat.com,
	ohad@wizery.com, bjorn.andersson@linaro.org
Cc: peter.griffin@linaro.org, lee.jones@linaro.org,
	dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	linux-remoteproc@vger.kernel.org,
	virtualization@lists.linux-foundation.org,
	Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH v9 03/19] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation
Date: Mon,  5 Sep 2016 14:16:45 +0100	[thread overview]
Message-ID: <1473081421-16555-4-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1473081421-16555-1-git-send-email-peter.griffin@linaro.org>

This patch adds the DT binding documentation for the FDMA constroller
found on STi based chipsets from STMicroelectronics.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/dma/st_fdma.txt | 87 +++++++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/st_fdma.txt

diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
new file mode 100644
index 0000000..495d853
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
@@ -0,0 +1,87 @@
+* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
+
+The FDMA is a general-purpose direct memory access controller capable of
+supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
+The FDMA is based on a Slim processor which requires a firmware.
+
+* FDMA Controller
+
+Required properties:
+- compatible	: Should be one of
+		 - st,stih407-fdma-mpe31-11, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-12, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-13, "st,slim-rproc";
+- reg		: Should contain an entry for each name in reg-names
+- reg-names	: Must contain "slimcore", "dmem", "peripherals", "imem" entries
+- interrupts	: Should contain one interrupt shared by all channels
+- dma-channels	: Number of channels supported by the controller
+- #dma-cells	: Must be <3>. See DMA client section below
+- clocks	: Must contain an entry for each clock
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Example:
+
+	fdma0: dma-controller@8e20000 {
+		compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+		reg = <0x8e20000 0x8000>,
+		      <0x8e30000 0x3000>,
+		      <0x8e37000 0x1000>,
+		      <0x8e38000 0x8000>;
+		reg-names = "slimcore", "dmem", "peripherals", "imem";
+		clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+		dma-channels = <16>;
+		#dma-cells = <3>;
+	};
+
+* DMA client
+
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+1. A phandle pointing to the FDMA controller
+2. The request line number
+3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h)
+ -bit 2-0: Holdoff value, dreq will be masked for
+	0x0: 0-0.5us
+	0x1: 0.5-1us
+	0x2: 1-1.5us
+ -bit 17: data swap
+	0x0: disabled
+	0x1: enabled
+ -bit 21: Increment Address
+	0x0: no address increment between transfers
+	0x1: increment address between transfers
+ -bit 22: 2 STBus Initiator Coprocessor interface
+	0x0: high priority port
+	0x1: low priority port
+4. transfers type
+ 0 free running
+ 1 paced
+
+Example:
+
+	sti_uni_player2: sti-uni-player@2 {
+		compatible = "st,sti-uni-player";
+		status = "disabled";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clock-parents = <&clk_s_d0_quadfs 2>;
+		assigned-clock-rates = <50000000>;
+		reg = <0x8D82000 0x158>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 4 0 1>;
+		dai-name = "Uni Player #1 (DAC)";
+		dma-names = "tx";
+		st,uniperiph-id = <2>;
+		st,version = <5>;
+		st,mode = "PCM";
+	};
-- 
1.9.1

WARNING: multiple messages have this Message-ID
From: Peter Griffin <peter.griffin@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@stlinux.com,
	vinod.koul@intel.com, patrice.chotard@st.com,
	dan.j.williams@intel.com, airlied@linux.ie, kraxel@redhat.com,
	ohad@wizery.com, bjorn.andersson@linaro.org
Cc: devicetree@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	virtualization@lists.linux-foundation.org,
	peter.griffin@linaro.org, dmaengine@vger.kernel.org,
	lee.jones@linaro.org, Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH v9 03/19] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation
Date: Mon,  5 Sep 2016 14:16:45 +0100	[thread overview]
Message-ID: <1473081421-16555-4-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1473081421-16555-1-git-send-email-peter.griffin@linaro.org>

This patch adds the DT binding documentation for the FDMA constroller
found on STi based chipsets from STMicroelectronics.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/dma/st_fdma.txt | 87 +++++++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/st_fdma.txt

diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
new file mode 100644
index 0000000..495d853
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
@@ -0,0 +1,87 @@
+* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
+
+The FDMA is a general-purpose direct memory access controller capable of
+supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
+The FDMA is based on a Slim processor which requires a firmware.
+
+* FDMA Controller
+
+Required properties:
+- compatible	: Should be one of
+		 - st,stih407-fdma-mpe31-11, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-12, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-13, "st,slim-rproc";
+- reg		: Should contain an entry for each name in reg-names
+- reg-names	: Must contain "slimcore", "dmem", "peripherals", "imem" entries
+- interrupts	: Should contain one interrupt shared by all channels
+- dma-channels	: Number of channels supported by the controller
+- #dma-cells	: Must be <3>. See DMA client section below
+- clocks	: Must contain an entry for each clock
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Example:
+
+	fdma0: dma-controller@8e20000 {
+		compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+		reg = <0x8e20000 0x8000>,
+		      <0x8e30000 0x3000>,
+		      <0x8e37000 0x1000>,
+		      <0x8e38000 0x8000>;
+		reg-names = "slimcore", "dmem", "peripherals", "imem";
+		clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+		dma-channels = <16>;
+		#dma-cells = <3>;
+	};
+
+* DMA client
+
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+1. A phandle pointing to the FDMA controller
+2. The request line number
+3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h)
+ -bit 2-0: Holdoff value, dreq will be masked for
+	0x0: 0-0.5us
+	0x1: 0.5-1us
+	0x2: 1-1.5us
+ -bit 17: data swap
+	0x0: disabled
+	0x1: enabled
+ -bit 21: Increment Address
+	0x0: no address increment between transfers
+	0x1: increment address between transfers
+ -bit 22: 2 STBus Initiator Coprocessor interface
+	0x0: high priority port
+	0x1: low priority port
+4. transfers type
+ 0 free running
+ 1 paced
+
+Example:
+
+	sti_uni_player2: sti-uni-player@2 {
+		compatible = "st,sti-uni-player";
+		status = "disabled";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clock-parents = <&clk_s_d0_quadfs 2>;
+		assigned-clock-rates = <50000000>;
+		reg = <0x8D82000 0x158>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 4 0 1>;
+		dai-name = "Uni Player #1 (DAC)";
+		dma-names = "tx";
+		st,uniperiph-id = <2>;
+		st,version = <5>;
+		st,mode = "PCM";
+	};
-- 
1.9.1

WARNING: multiple messages have this Message-ID
From: peter.griffin@linaro.org (Peter Griffin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 03/19] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation
Date: Mon,  5 Sep 2016 14:16:45 +0100	[thread overview]
Message-ID: <1473081421-16555-4-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1473081421-16555-1-git-send-email-peter.griffin@linaro.org>

This patch adds the DT binding documentation for the FDMA constroller
found on STi based chipsets from STMicroelectronics.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/dma/st_fdma.txt | 87 +++++++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/st_fdma.txt

diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
new file mode 100644
index 0000000..495d853
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
@@ -0,0 +1,87 @@
+* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
+
+The FDMA is a general-purpose direct memory access controller capable of
+supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
+The FDMA is based on a Slim processor which requires a firmware.
+
+* FDMA Controller
+
+Required properties:
+- compatible	: Should be one of
+		 - st,stih407-fdma-mpe31-11, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-12, "st,slim-rproc";
+		 - st,stih407-fdma-mpe31-13, "st,slim-rproc";
+- reg		: Should contain an entry for each name in reg-names
+- reg-names	: Must contain "slimcore", "dmem", "peripherals", "imem" entries
+- interrupts	: Should contain one interrupt shared by all channels
+- dma-channels	: Number of channels supported by the controller
+- #dma-cells	: Must be <3>. See DMA client section below
+- clocks	: Must contain an entry for each clock
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Example:
+
+	fdma0: dma-controller at 8e20000 {
+		compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+		reg = <0x8e20000 0x8000>,
+		      <0x8e30000 0x3000>,
+		      <0x8e37000 0x1000>,
+		      <0x8e38000 0x8000>;
+		reg-names = "slimcore", "dmem", "peripherals", "imem";
+		clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+			 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+		dma-channels = <16>;
+		#dma-cells = <3>;
+	};
+
+* DMA client
+
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+1. A phandle pointing to the FDMA controller
+2. The request line number
+3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h)
+ -bit 2-0: Holdoff value, dreq will be masked for
+	0x0: 0-0.5us
+	0x1: 0.5-1us
+	0x2: 1-1.5us
+ -bit 17: data swap
+	0x0: disabled
+	0x1: enabled
+ -bit 21: Increment Address
+	0x0: no address increment between transfers
+	0x1: increment address between transfers
+ -bit 22: 2 STBus Initiator Coprocessor interface
+	0x0: high priority port
+	0x1: low priority port
+4. transfers type
+ 0 free running
+ 1 paced
+
+Example:
+
+	sti_uni_player2: sti-uni-player at 2 {
+		compatible = "st,sti-uni-player";
+		status = "disabled";
+		#sound-dai-cells = <0>;
+		st,syscfg = <&syscfg_core>;
+		clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+		assigned-clock-parents = <&clk_s_d0_quadfs 2>;
+		assigned-clock-rates = <50000000>;
+		reg = <0x8D82000 0x158>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		dmas = <&fdma0 4 0 1>;
+		dai-name = "Uni Player #1 (DAC)";
+		dma-names = "tx";
+		st,uniperiph-id = <2>;
+		st,version = <5>;
+		st,mode = "PCM";
+	};
-- 
1.9.1

  parent reply	other threads:[~2016-09-05 13:16 UTC|newest]

Thread overview: 172+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-05 13:16 [PATCH v9 00/19] Add support for FDMA DMA controller and slim core rproc found on STi chipsets Peter Griffin
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 01/19] remoteproc: st_slim_rproc: add a slimcore rproc driver Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-13 17:56   ` Bjorn Andersson
2016-09-13 17:56     ` Bjorn Andersson
2016-09-13 17:56     ` Bjorn Andersson
2016-09-14  8:30     ` Lee Jones
2016-09-14  8:30     ` Lee Jones
2016-09-14  8:30       ` Lee Jones
2016-09-14  8:30       ` Lee Jones
2016-09-05 13:16 ` [PATCH v9 02/19] MAINTAINERS: Add st slim core rproc driver to STi section Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16 ` Peter Griffin [this message]
2016-09-05 13:16   ` [PATCH v9 03/19] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 04/19] dmaengine: st_fdma: Add STMicroelectronics FDMA driver header file Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 05/19] dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 06/19] ARM: STi: DT: STiH407: Add FDMA driver dt nodes Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 11:59   ` Patrice Chotard
2016-09-14 11:59     ` Patrice Chotard
2016-09-14 11:59     ` Patrice Chotard
2016-09-14 11:59     ` Patrice Chotard
2016-09-14 11:59   ` Patrice Chotard
2016-09-05 13:16 ` [PATCH v9 07/19] MAINTAINERS: Add FDMA driver files to STi section Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 08/19] ARM: multi_v7_defconfig: Enable STi FDMA driver Peter Griffin
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 09/19] ARM: multi_v7_defconfig: Enable STi and simple-card drivers Peter Griffin
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 10/19] ARM: DT: STiH407: Add i2s_out pinctrl configuration Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 12:00   ` Patrice Chotard
2016-09-14 12:00   ` Patrice Chotard
2016-09-14 12:00     ` Patrice Chotard
2016-09-14 12:00     ` Patrice Chotard
2016-09-05 13:16 ` [PATCH v9 11/19] ARM: DT: STiH407: Add i2s_in " Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 12:00   ` Patrice Chotard
2016-09-14 12:00   ` Patrice Chotard
2016-09-14 12:00     ` Patrice Chotard
2016-09-14 12:00     ` Patrice Chotard
2016-09-14 12:00     ` Patrice Chotard
2016-09-05 13:16 ` [PATCH v9 12/19] ARM: DT: STiH407: Add spdif_out pinctrl config Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 12:00   ` Patrice Chotard
2016-09-14 12:00     ` Patrice Chotard
2016-09-14 12:00     ` Patrice Chotard
2016-09-14 12:00   ` Patrice Chotard
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 13/19] ARM: STi: DT: STiH407: Add sti-sasg-codec dt node Peter Griffin
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 12:01   ` Patrice Chotard
2016-09-14 12:01   ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-05 13:16 ` [PATCH v9 14/19] ARM: STi: DT: STiH407: Add uniperif player dt nodes Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 12:01   ` Patrice Chotard
2016-09-14 12:01   ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-05 13:16 ` [PATCH v9 15/19] ARM: STi: DT: STiH407: Add uniperif reader " Peter Griffin
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 12:01   ` Patrice Chotard
2016-09-14 12:01   ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-05 13:16 ` [PATCH v9 16/19] ARM: DT: STi: stihxxx-b2120: Add DT nodes for STi audio card Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-14 12:01   ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-14 12:01     ` Patrice Chotard
2016-09-14 12:01   ` Patrice Chotard
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16 ` [PATCH v9 17/19] drm/virtio: kconfig: Fix recursive dependency issue Peter Griffin
2016-09-05 13:16 ` Peter Griffin
2016-09-05 13:16   ` Peter Griffin
2016-09-19 23:18   ` Emil Velikov
2016-09-19 23:18     ` Emil Velikov
2016-09-19 23:18     ` Emil Velikov
2016-09-19 23:18     ` Emil Velikov
2016-09-19 23:18     ` Emil Velikov
2016-09-20  8:32     ` Peter Griffin
2016-09-20  8:32       ` Peter Griffin
2016-09-20  8:32       ` Peter Griffin
2016-09-20  8:32       ` Peter Griffin
2016-09-20  9:33       ` Jani Nikula
2016-09-20  9:33       ` Jani Nikula
2016-09-20  9:33         ` Jani Nikula
2016-09-20  9:33         ` Jani Nikula
2016-09-20  9:33         ` Jani Nikula
2016-10-06  9:37         ` Peter Griffin
2016-10-06  9:37           ` Peter Griffin
2016-10-06  9:37           ` Peter Griffin
2016-10-06  9:37           ` Peter Griffin
2016-10-06 10:45           ` Emil Velikov
2016-10-06 10:45           ` Emil Velikov
2016-10-06 10:45             ` Emil Velikov
2016-10-06 10:45             ` Emil Velikov
2016-10-06 10:45             ` Emil Velikov
2016-10-07 17:44             ` Peter Griffin
2016-10-07 17:44               ` Peter Griffin
2016-10-07 17:44               ` Peter Griffin
2016-10-07 17:44               ` Peter Griffin
2016-09-21 12:09       ` Emil Velikov
2016-09-21 12:09       ` Emil Velikov
2016-09-21 12:09         ` Emil Velikov
2016-09-21 12:09         ` Emil Velikov
2016-09-27 17:01         ` Bjorn Andersson
2016-09-27 17:01           ` Bjorn Andersson
2016-09-27 17:01           ` Bjorn Andersson
2016-09-27 17:01           ` Bjorn Andersson
2016-10-06 10:10           ` Emil Velikov
2016-10-06 10:10           ` Emil Velikov
2016-10-06 10:10             ` Emil Velikov
2016-10-06 10:10             ` Emil Velikov
2016-10-06 10:48         ` Peter Griffin
2016-10-06 10:48           ` Peter Griffin
2016-10-06 10:48           ` Peter Griffin
2016-10-06 10:48           ` Peter Griffin
2016-10-06 11:31           ` Emil Velikov
2016-10-06 11:31             ` Emil Velikov
2016-10-06 11:31             ` Emil Velikov
2016-10-06 11:31           ` Emil Velikov
2016-09-05 13:17 ` [PATCH v9 18/19] drm/virtio: kconfig: Fixup white space Peter Griffin
2016-09-05 13:17   ` Peter Griffin
2016-09-05 13:17 ` Peter Griffin
2016-09-05 13:17 ` [PATCH v9 19/19] dmaengine: kconfig: Remove superfluous '\n' Peter Griffin
2016-09-05 13:17   ` Peter Griffin
2016-09-05 13:17   ` Peter Griffin
2016-09-05 13:17 ` Peter Griffin
2016-09-13  9:31 ` [PATCH v9 00/19] Add support for FDMA DMA controller and slim core rproc found on STi chipsets Peter Griffin
2016-09-13  9:31 ` Peter Griffin
2016-09-13  9:31   ` Peter Griffin
2016-09-13  9:31   ` Peter Griffin
2016-09-13 18:06   ` Bjorn Andersson
2016-09-13 18:06   ` Bjorn Andersson
2016-09-13 18:06     ` Bjorn Andersson
2016-09-13 18:06     ` Bjorn Andersson
2016-09-14  6:59     ` Patrice Chotard
2016-09-14  6:59       ` Patrice Chotard
2016-09-14  6:59       ` Patrice Chotard
2016-09-14  6:59       ` Patrice Chotard
2016-09-14  6:59     ` Patrice Chotard
2016-09-14 13:07     ` Vinod Koul
2016-09-14 13:07       ` Vinod Koul
2016-09-14 13:07       ` Vinod Koul
2016-09-15 16:20       ` Vinod Koul
2016-09-15 16:20       ` Vinod Koul
2016-09-15 16:20         ` Vinod Koul
2016-09-15 16:20         ` Vinod Koul
2016-09-14 13:07     ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473081421-16555-4-git-send-email-peter.griffin@linaro.org \
    --to=peter.griffin@linaro.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@stlinux.com \
    --cc=kraxel@redhat.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ludovic.barre@st.com \
    --cc=ohad@wizery.com \
    --cc=patrice.chotard@st.com \
    --cc=vinod.koul@intel.com \
    --cc=virtualization@lists.linux-foundation.org \
    --subject='Re: [PATCH v9 03/19] dmaengine: st_fdma: Add STMicroelectronics FDMA DT binding documentation' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.