[PATCH 0/3] Updates for ARC VDK platform

[PATCH 0/3] Updates for ARC VDK platform

[Alexey Brodkin]

This series improves ARC VDK support in upstream Linux kernel by:
 1) Removal of UP configuration which is no longer supported by ARC VDK.
    Instead SMP platform with all but master cores halted is used to mimic
    UP system.

 2) Adding off-the-tree patches that enable MMC card and UIO

Alexey Brodkin (3):
  arc: vdk: Disable halt on reset
  arc: vdk: Add support of MMC controller
  arc: vdk: Add support of UIO

 arch/arc/boot/dts/vdk_axs10x_mb.dtsi    | 26 ++++++++++++++++++++++++++
 arch/arc/configs/vdk_hs38_smp_defconfig | 10 +++++++---
 2 files changed, 33 insertions(+), 3 deletions(-)

-- 
2.7.4

[PATCH 0/3] Updates for ARC VDK platform

[Alexey Brodkin]

This series improves ARC VDK support in upstream Linux kernel by:
 1) Removal of UP configuration which is no longer supported by ARC VDK.
    Instead SMP platform with all but master cores halted is used to mimic
    UP system.

 2) Adding off-the-tree patches that enable MMC card and UIO

Alexey Brodkin (3):
  arc: vdk: Disable halt on reset
  arc: vdk: Add support of MMC controller
  arc: vdk: Add support of UIO

 arch/arc/boot/dts/vdk_axs10x_mb.dtsi    | 26 ++++++++++++++++++++++++++
 arch/arc/configs/vdk_hs38_smp_defconfig | 10 +++++++---
 2 files changed, 33 insertions(+), 3 deletions(-)

-- 
2.7.4

[PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

In recent VDKs ARC cores are configured as "run on reset"
which made existing kernel configuration outdated to effect that
slave cores never start execution of the code keeping only master
online.

With that fix we're again in sync with VDK platform.

And while at it we regenerate defconfig via savedefconfig so default
options are now excluded.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
 arch/arc/configs/vdk_hs38_smp_defconfig | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 573028f19de7..f6361de41eec 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_TIMERS_64BIT is not set
+# CONFIG_ARC_SMP_HALT_ON_RESET is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
@@ -56,7 +56,6 @@ CONFIG_NATIONAL_PHY=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
@@ -80,7 +79,6 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
-- 
2.7.4

[PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

In recent VDKs ARC cores are configured as "run on reset"
which made existing kernel configuration outdated to effect that
slave cores never start execution of the code keeping only master
online.

With that fix we're again in sync with VDK platform.

And while at it we regenerate defconfig via savedefconfig so default
options are now excluded.

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
---
 arch/arc/configs/vdk_hs38_smp_defconfig | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 573028f19de7..f6361de41eec 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_TIMERS_64BIT is not set
+# CONFIG_ARC_SMP_HALT_ON_RESET is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
@@ -56,7 +56,6 @@ CONFIG_NATIONAL_PHY=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 CONFIG_SERIO_ARC_PS2=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
@@ -80,7 +79,6 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
-- 
2.7.4

Re: [PATCH 1/3] arc: vdk: Disable halt on reset

[Vineet Gupta]

On 02/01/2017 08:42 AM, Alexey Brodkin wrote:
> In recent VDKs ARC cores are configured as "run on reset"
> which made existing kernel configuration outdated to effect that
> slave cores never start execution of the code keeping only master
> online.
> 
> With that fix we're again in sync with VDK platform.
> 
> And while at it we regenerate defconfig via savedefconfig so default
> options are now excluded.
> 
> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> ---
>  arch/arc/configs/vdk_hs38_smp_defconfig | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
> index 573028f19de7..f6361de41eec 100644
> --- a/arch/arc/configs/vdk_hs38_smp_defconfig
> +++ b/arch/arc/configs/vdk_hs38_smp_defconfig
> @@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
>  CONFIG_AXS103=y
>  CONFIG_ISA_ARCV2=y
>  CONFIG_SMP=y
> -# CONFIG_ARC_TIMERS_64BIT is not set

Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..

> +# CONFIG_ARC_SMP_HALT_ON_RESET is not set
>  CONFIG_ARC_UBOOT_SUPPORT=y
>  CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
>  CONFIG_PREEMPT=y
> @@ -56,7 +56,6 @@ CONFIG_NATIONAL_PHY=y
>  CONFIG_MOUSE_PS2_TOUCHKIT=y
>  CONFIG_SERIO_ARC_PS2=y
>  # CONFIG_LEGACY_PTYS is not set
> -# CONFIG_DEVKMEM is not set
>  CONFIG_SERIAL_8250=y
>  CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_8250_DW=y
> @@ -80,7 +79,6 @@ CONFIG_USB_STORAGE=y
>  CONFIG_USB_SERIAL=y
>  # CONFIG_IOMMU_SUPPORT is not set
>  CONFIG_EXT3_FS=y
> -CONFIG_EXT4_FS=y
>  CONFIG_MSDOS_FS=y
>  CONFIG_VFAT_FS=y
>  CONFIG_NTFS_FS=y
> 

[PATCH 1/3] arc: vdk: Disable halt on reset

[Vineet Gupta]

On 02/01/2017 08:42 AM, Alexey Brodkin wrote:
> In recent VDKs ARC cores are configured as "run on reset"
> which made existing kernel configuration outdated to effect that
> slave cores never start execution of the code keeping only master
> online.
> 
> With that fix we're again in sync with VDK platform.
> 
> And while at it we regenerate defconfig via savedefconfig so default
> options are now excluded.
> 
> Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
> ---
>  arch/arc/configs/vdk_hs38_smp_defconfig | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
> index 573028f19de7..f6361de41eec 100644
> --- a/arch/arc/configs/vdk_hs38_smp_defconfig
> +++ b/arch/arc/configs/vdk_hs38_smp_defconfig
> @@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
>  CONFIG_AXS103=y
>  CONFIG_ISA_ARCV2=y
>  CONFIG_SMP=y
> -# CONFIG_ARC_TIMERS_64BIT is not set

Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..

> +# CONFIG_ARC_SMP_HALT_ON_RESET is not set
>  CONFIG_ARC_UBOOT_SUPPORT=y
>  CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
>  CONFIG_PREEMPT=y
> @@ -56,7 +56,6 @@ CONFIG_NATIONAL_PHY=y
>  CONFIG_MOUSE_PS2_TOUCHKIT=y
>  CONFIG_SERIO_ARC_PS2=y
>  # CONFIG_LEGACY_PTYS is not set
> -# CONFIG_DEVKMEM is not set
>  CONFIG_SERIAL_8250=y
>  CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_8250_DW=y
> @@ -80,7 +79,6 @@ CONFIG_USB_STORAGE=y
>  CONFIG_USB_SERIAL=y
>  # CONFIG_IOMMU_SUPPORT is not set
>  CONFIG_EXT3_FS=y
> -CONFIG_EXT4_FS=y
>  CONFIG_MSDOS_FS=y
>  CONFIG_VFAT_FS=y
>  CONFIG_NTFS_FS=y
> 

Re: [PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01 at 08:52 -0800, Vineet Gupta wrote:
> On 02/01/2017 08:42 AM, Alexey Brodkin wrote:
> > 
> > In recent VDKs ARC cores are configured as "run on reset"
> > which made existing kernel configuration outdated to effect that
> > slave cores never start execution of the code keeping only master
> > online.
> > 
> > With that fix we're again in sync with VDK platform.
> > 
> > And while at it we regenerate defconfig via savedefconfig so default
> > options are now excluded.
> > 
> > Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
> > ---
> >  arch/arc/configs/vdk_hs38_smp_defconfig | 4 +---
> >  1 file changed, 1 insertion(+), 3 deletions(-)
> > 
> > diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
> > index 573028f19de7..f6361de41eec 100644
> > --- a/arch/arc/configs/vdk_hs38_smp_defconfig
> > +++ b/arch/arc/configs/vdk_hs38_smp_defconfig
> > @@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
> >  CONFIG_AXS103=y
> >  CONFIG_ISA_ARCV2=y
> >  CONFIG_SMP=y
> > -# CONFIG_ARC_TIMERS_64BIT is not set
> 
> Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
> for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..

Not anymore :)

Probably I missed something in discussions.
As a matter of fact I did run-test resulting vmlinux and it worked very nice.
More over ARC_TIMERS_64BIT is selected automatically by ISA_ARCV2, see
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arc/Kconfig#n119

That said even if "# CONFIG_ARC_TIMERS_64BIT is not set" is left in place the option will be
effectively enabled, no?

-Alexey

[PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01@08:52 -0800, Vineet Gupta wrote:
> On 02/01/2017 08:42 AM, Alexey Brodkin wrote:
> > 
> > In recent VDKs ARC cores are configured as "run on reset"
> > which made existing kernel configuration outdated to effect that
> > slave cores never start execution of the code keeping only master
> > online.
> > 
> > With that fix we're again in sync with VDK platform.
> > 
> > And while at it we regenerate defconfig via savedefconfig so default
> > options are now excluded.
> > 
> > Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
> > ---
> > ?arch/arc/configs/vdk_hs38_smp_defconfig | 4 +---
> > ?1 file changed, 1 insertion(+), 3 deletions(-)
> > 
> > diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
> > index 573028f19de7..f6361de41eec 100644
> > --- a/arch/arc/configs/vdk_hs38_smp_defconfig
> > +++ b/arch/arc/configs/vdk_hs38_smp_defconfig
> > @@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
> > ?CONFIG_AXS103=y
> > ?CONFIG_ISA_ARCV2=y
> > ?CONFIG_SMP=y
> > -# CONFIG_ARC_TIMERS_64BIT is not set
> 
> Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
> for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..

Not anymore :)

Probably I missed something in discussions.
As a matter of fact I did run-test resulting vmlinux and it worked very nice.
More over?ARC_TIMERS_64BIT is selected automatically by?ISA_ARCV2, see
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arc/Kconfig#n119

That said even if "# CONFIG_ARC_TIMERS_64BIT is not set" is left in place the option will be
effectively enabled, no?

-Alexey

Re: [PATCH 1/3] arc: vdk: Disable halt on reset

[Vineet Gupta]

On 02/01/2017 09:14 AM, Alexey Brodkin wrote:
>>> -# CONFIG_ARC_TIMERS_64BIT is not set
>>
>> Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
>> for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..
> 
> Not anymore :)
> 
> Probably I missed something in discussions.

STAR 9000879565, 9000879563

> As a matter of fact I did run-test resulting vmlinux and it worked very nice.
> More over ARC_TIMERS_64BIT is selected automatically by ISA_ARCV2, see
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arc/Kconfig#n119
> 
> That said even if "# CONFIG_ARC_TIMERS_64BIT is not set" is left in place the option will be
> effectively enabled, no?

The whole point of adding this to defconfig is to override the default from Kconfig ?

[PATCH 1/3] arc: vdk: Disable halt on reset

[Vineet Gupta]

On 02/01/2017 09:14 AM, Alexey Brodkin wrote:
>>> -# CONFIG_ARC_TIMERS_64BIT is not set
>>
>> Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
>> for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..
> 
> Not anymore :)
> 
> Probably I missed something in discussions.

STAR 9000879565, 9000879563

> As a matter of fact I did run-test resulting vmlinux and it worked very nice.
> More over ARC_TIMERS_64BIT is selected automatically by ISA_ARCV2, see
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arc/Kconfig#n119
> 
> That said even if "# CONFIG_ARC_TIMERS_64BIT is not set" is left in place the option will be
> effectively enabled, no?

The whole point of adding this to defconfig is to override the default from Kconfig ?

Re: [PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01 at 09:37 -0800, Vineet Gupta wrote:
> On 02/01/2017 09:14 AM, Alexey Brodkin wrote:
> > 
> > > 
> > > > 
> > > > -# CONFIG_ARC_TIMERS_64BIT is not set
> > > 
> > > Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
> > > for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..
> > 
> > Not anymore :)
> > 
> > Probably I missed something in discussions.
> 
> STAR 9000879565, 9000879563
> 
> > 
> > As a matter of fact I did run-test resulting vmlinux and it worked very nice.
> > More over ARC_TIMERS_64BIT is selected automatically by ISA_ARCV2, see
> > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arc/Kconfig#n119
> > 
> > That said even if "# CONFIG_ARC_TIMERS_64BIT is not set" is left in place the option will be
> > effectively enabled, no?
> 
> The whole point of adding this to defconfig is to override the default from Kconfig ?

Not anymore :)

Since commit c4c9a040ecb7 ("clocksource: import ARC timer driver"),
see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
we have this:
---------------------->8----------------------
config ISA_ARCV2
	bool "ARC ISA v2"
	select ARC_TIMERS_64BIT
---------------------->8----------------------

which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets selected automatically
and there's no way to override it from either menuconfig or defconfig.

Probably behavior that you meant was to keep a separate "config ARC_TIMERS_64BIT"
and have it "default y if ISA_ARCV2".

-Alexey

[PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01@09:37 -0800, Vineet Gupta wrote:
> On 02/01/2017 09:14 AM, Alexey Brodkin wrote:
> > 
> > > 
> > > > 
> > > > -# CONFIG_ARC_TIMERS_64BIT is not set
> > > 
> > > Are you sure abut this part. Ater the timers driver rework, this would enable GFRC
> > > for SMP builds and AFAIKR there were some issues with time with GFRC + nSIM etc..
> > 
> > Not anymore :)
> > 
> > Probably I missed something in discussions.
> 
> STAR 9000879565, 9000879563
> 
> > 
> > As a matter of fact I did run-test resulting vmlinux and it worked very nice.
> > More over ARC_TIMERS_64BIT is selected automatically by ISA_ARCV2, see
> > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arc/Kconfig#n119
> > 
> > That said even if "# CONFIG_ARC_TIMERS_64BIT is not set" is left in place the option will be
> > effectively enabled, no?
> 
> The whole point of adding this to defconfig is to override the default from Kconfig ?

Not anymore :)

Since commit?c4c9a040ecb7 ("clocksource: import ARC timer driver"),
see?http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
we have this:
---------------------->8----------------------
config ISA_ARCV2
	bool "ARC ISA v2"
	select ARC_TIMERS_64BIT
---------------------->8----------------------

which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets selected automatically
and there's no way to override it from either menuconfig or defconfig.

Probably behavior that you meant was to keep a separate "config ARC_TIMERS_64BIT"
and have it "default y if ISA_ARCV2".

-Alexey

Re: [PATCH 1/3] arc: vdk: Disable halt on reset

[Vineet Gupta]

On 02/01/2017 09:52 AM, Alexey Brodkin wrote:
>> The whole point of adding this to defconfig is to override the default from Kconfig ?
> Not anymore :)
> 
> Since commit c4c9a040ecb7 ("clocksource: import ARC timer driver"),
> see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
> we have this:
> ---------------------->8----------------------
> config ISA_ARCV2
> 	bool "ARC ISA v2"
> 	select ARC_TIMERS_64BIT
> ---------------------->8----------------------
> 
> which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets selected automatically
> and there's no way to override it from either menuconfig or defconfig.

Bummer - this means VDK based off 4.9+ kernel might be affected with nsim GFRC issue !

> Probably behavior that you meant was to keep a separate "config ARC_TIMERS_64BIT"
> and have it "default y if ISA_ARCV2".

No, the whole point of moving it out of arch/arc was to increase test coverage etc
so it was not tied to ISA_ARCV2 on purpose so that it would atleast build.

Lets see what Rudd has to say abt this. But GFRC can't be used this would need
fixing after all by introducing an additional ARC_PLAT_CANT_USE_TIMERS_64BIT which
is def_bool set to n, but selected y in VDK Kconfig.

-Vineet

[PATCH 1/3] arc: vdk: Disable halt on reset

[Vineet Gupta]

On 02/01/2017 09:52 AM, Alexey Brodkin wrote:
>> The whole point of adding this to defconfig is to override the default from Kconfig ?
> Not anymore :)
> 
> Since commit c4c9a040ecb7 ("clocksource: import ARC timer driver"),
> see http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
> we have this:
> ---------------------->8----------------------
> config ISA_ARCV2
> 	bool "ARC ISA v2"
> 	select ARC_TIMERS_64BIT
> ---------------------->8----------------------
> 
> which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets selected automatically
> and there's no way to override it from either menuconfig or defconfig.

Bummer - this means VDK based off 4.9+ kernel might be affected with nsim GFRC issue !

> Probably behavior that you meant was to keep a separate "config ARC_TIMERS_64BIT"
> and have it "default y if ISA_ARCV2".

No, the whole point of moving it out of arch/arc was to increase test coverage etc
so it was not tied to ISA_ARCV2 on purpose so that it would atleast build.

Lets see what Rudd has to say abt this. But GFRC can't be used this would need
fixing after all by introducing an additional ARC_PLAT_CANT_USE_TIMERS_64BIT which
is def_bool set to n, but selected y in VDK Kconfig.

-Vineet

RE: [PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

Hi Vineet,

> -----Original Message-----
> From: Vineet Gupta [mailto:vgupta@synopsys.com]
> Sent: Wednesday, February 1, 2017 10:56 PM
> To: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
> Cc: Ruud Derwig <rderwig@synopsys.com>; linux-kernel@vger.kernel.org;
> linux-snps-arc@lists.infradead.org
> Subject: Re: [PATCH 1/3] arc: vdk: Disable halt on reset
> 
> On 02/01/2017 09:52 AM, Alexey Brodkin wrote:
> >> The whole point of adding this to defconfig is to override the default from
> Kconfig ?
> > Not anymore :)
> >
> > Since commit c4c9a040ecb7 ("clocksource: import ARC timer driver"),
> > see
> > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
> > ?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
> > we have this:
> > ---------------------->8----------------------
> > config ISA_ARCV2
> > 	bool "ARC ISA v2"
> > 	select ARC_TIMERS_64BIT
> > ---------------------->8----------------------
> >
> > which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets
> > selected automatically and there's no way to override it from either
> menuconfig or defconfig.
> 
> Bummer - this means VDK based off 4.9+ kernel might be affected with nsim
> GFRC issue !

One note here - I think it only affects 4.10+ kernels.

-Aexey

[PATCH 1/3] arc: vdk: Disable halt on reset

[Alexey Brodkin]

Hi Vineet,

> -----Original Message-----
> From: Vineet Gupta [mailto:vgupta at synopsys.com]
> Sent: Wednesday, February 1, 2017 10:56 PM
> To: Alexey Brodkin <Alexey.Brodkin at synopsys.com>
> Cc: Ruud Derwig <rderwig at synopsys.com>; linux-kernel at vger.kernel.org;
> linux-snps-arc at lists.infradead.org
> Subject: Re: [PATCH 1/3] arc: vdk: Disable halt on reset
> 
> On 02/01/2017 09:52 AM, Alexey Brodkin wrote:
> >> The whole point of adding this to defconfig is to override the default from
> Kconfig ?
> > Not anymore :)
> >
> > Since commit c4c9a040ecb7 ("clocksource: import ARC timer driver"),
> > see
> > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
> > ?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
> > we have this:
> > ---------------------->8----------------------
> > config ISA_ARCV2
> > 	bool "ARC ISA v2"
> > 	select ARC_TIMERS_64BIT
> > ---------------------->8----------------------
> >
> > which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets
> > selected automatically and there's no way to override it from either
> menuconfig or defconfig.
> 
> Bummer - this means VDK based off 4.9+ kernel might be affected with nsim
> GFRC issue !

One note here - I think it only affects 4.10+ kernels.

-Aexey

RE: [PATCH 1/3] arc: vdk: Disable halt on reset

[Ruud Derwig]

Hi,

VDK config includes GRFC, not sure if it's working/used though.
The nSIM STAR is about that GRFC frequency is fixed in nSIM, but configurable for HW/customers.
But if the frequency is configured correctly (same as cpu frequency), don't think there's an issue.

Ruud.
-----Original Message-----
From: Vineet Gupta 
Sent: Wednesday, February 01, 2017 8:56 PM
To: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ruud Derwig <rderwig@synopsys.com>; linux-kernel@vger.kernel.org; linux-snps-arc@lists.infradead.org
Subject: Re: [PATCH 1/3] arc: vdk: Disable halt on reset

On 02/01/2017 09:52 AM, Alexey Brodkin wrote:
>> The whole point of adding this to defconfig is to override the default from Kconfig ?
> Not anymore :)
> 
> Since commit c4c9a040ecb7 ("clocksource: import ARC timer driver"), 
> see 
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
> ?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
> we have this:
> ---------------------->8----------------------
> config ISA_ARCV2
> 	bool "ARC ISA v2"
> 	select ARC_TIMERS_64BIT
> ---------------------->8----------------------
> 
> which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets 
> selected automatically and there's no way to override it from either menuconfig or defconfig.

Bummer - this means VDK based off 4.9+ kernel might be affected with nsim GFRC issue !

> Probably behavior that you meant was to keep a separate "config ARC_TIMERS_64BIT"
> and have it "default y if ISA_ARCV2".

No, the whole point of moving it out of arch/arc was to increase test coverage etc so it was not tied to ISA_ARCV2 on purpose so that it would atleast build.

Lets see what Rudd has to say abt this. But GFRC can't be used this would need fixing after all by introducing an additional ARC_PLAT_CANT_USE_TIMERS_64BIT which is def_bool set to n, but selected y in VDK Kconfig.

-Vineet

[PATCH 1/3] arc: vdk: Disable halt on reset

[Ruud Derwig]

Hi,

VDK config includes GRFC, not sure if it's working/used though.
The nSIM STAR is about that GRFC frequency is fixed in nSIM, but configurable for HW/customers.
But if the frequency is configured correctly (same as cpu frequency), don't think there's an issue.

Ruud.
-----Original Message-----
From: Vineet Gupta 
Sent: Wednesday, February 01, 2017 8:56 PM
To: Alexey Brodkin <Alexey.Brodkin at synopsys.com>
Cc: Ruud Derwig <rderwig at synopsys.com>; linux-kernel at vger.kernel.org; linux-snps-arc at lists.infradead.org
Subject: Re: [PATCH 1/3] arc: vdk: Disable halt on reset

On 02/01/2017 09:52 AM, Alexey Brodkin wrote:
>> The whole point of adding this to defconfig is to override the default from Kconfig ?
> Not anymore :)
> 
> Since commit c4c9a040ecb7 ("clocksource: import ARC timer driver"), 
> see 
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
> ?id=c4c9a040ecb7297e011e579f5a9cc280e42d725f
> we have this:
> ---------------------->8----------------------
> config ISA_ARCV2
> 	bool "ARC ISA v2"
> 	select ARC_TIMERS_64BIT
> ---------------------->8----------------------
> 
> which really means if one selects ISA_ARCV2 then ARC_TIMERS_64BIT gets 
> selected automatically and there's no way to override it from either menuconfig or defconfig.

Bummer - this means VDK based off 4.9+ kernel might be affected with nsim GFRC issue !

> Probably behavior that you meant was to keep a separate "config ARC_TIMERS_64BIT"
> and have it "default y if ISA_ARCV2".

No, the whole point of moving it out of arch/arc was to increase test coverage etc so it was not tied to ISA_ARCV2 on purpose so that it would atleast build.

Lets see what Rudd has to say abt this. But GFRC can't be used this would need fixing after all by introducing an additional ARC_PLAT_CANT_USE_TIMERS_64BIT which is def_bool set to n, but selected y in VDK Kconfig.

-Vineet

[PATCH 2/3] arc: vdk: Add support of MMC controller

[Alexey Brodkin]

ARC VDK virtual platform emulates host MMC controller (DW Mobile Storage)
and moreover rootfs is situated on that virtual card.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi    | 18 ++++++++++++++++++
 arch/arc/configs/vdk_hs38_smp_defconfig |  4 ++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 99498a4b4216..1953914b9f4f 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -23,6 +23,12 @@
 				#clock-cells = <0>;
 			};
 
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
 			pguclk: pguclk {
 				#clock-cells = <0>;
 				compatible = "fixed-clock";
@@ -94,5 +100,17 @@
 			interrupts = <5>;
 			interrupt-names = "arc_ps2_irq";
 		};
+
+		mmc@0x15000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x15000 0x400>;
+			num-slots = <1>;
+			fifo-depth = <1024>;
+			card-detect-delay = <200>;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = <7>;
+			bus-width = <4>;
+		};
 	};
 };
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index f6361de41eec..e03413fbc784 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -77,6 +77,10 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_MSDOS_FS=y
-- 
2.7.4

[PATCH 2/3] arc: vdk: Add support of MMC controller

[Alexey Brodkin]

ARC VDK virtual platform emulates host MMC controller (DW Mobile Storage)
and moreover rootfs is situated on that virtual card.

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
---
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi    | 18 ++++++++++++++++++
 arch/arc/configs/vdk_hs38_smp_defconfig |  4 ++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 99498a4b4216..1953914b9f4f 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -23,6 +23,12 @@
 				#clock-cells = <0>;
 			};
 
+			mmcclk: mmcclk {
+				compatible = "fixed-clock";
+				clock-frequency = <50000000>;
+				#clock-cells = <0>;
+			};
+
 			pguclk: pguclk {
 				#clock-cells = <0>;
 				compatible = "fixed-clock";
@@ -94,5 +100,17 @@
 			interrupts = <5>;
 			interrupt-names = "arc_ps2_irq";
 		};
+
+		mmc at 0x15000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x15000 0x400>;
+			num-slots = <1>;
+			fifo-depth = <1024>;
+			card-detect-delay = <200>;
+			clocks = <&apbclk>, <&mmcclk>;
+			clock-names = "biu", "ciu";
+			interrupts = <7>;
+			bus-width = <4>;
+		};
 	};
 };
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index f6361de41eec..e03413fbc784 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -77,6 +77,10 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SERIAL=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_MSDOS_FS=y
-- 
2.7.4

[PATCH 3/3] arc: vdk: Add support of UIO

[Alexey Brodkin]

ARC VDK for EVSS uses UIO for communication with Embedded Vision
Subsystem.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi    | 8 ++++++++
 arch/arc/configs/vdk_hs38_smp_defconfig | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 1953914b9f4f..f0df59b23e21 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -112,5 +112,13 @@
 			interrupts = <7>;
 			bus-width = <4>;
 		};
+
+		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
+		uio_ev: uio@0xD0000000 {
+			compatible = "generic-uio";
+			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+			interrupts = <23>;
+		};
 	};
 };
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index e03413fbc784..1a9b19903c9a 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -81,6 +81,8 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_MSDOS_FS=y
-- 
2.7.4

[PATCH 3/3] arc: vdk: Add support of UIO

[Alexey Brodkin]

ARC VDK for EVSS uses UIO for communication with Embedded Vision
Subsystem.

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
---
 arch/arc/boot/dts/vdk_axs10x_mb.dtsi    | 8 ++++++++
 arch/arc/configs/vdk_hs38_smp_defconfig | 2 ++
 2 files changed, 10 insertions(+)

diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 1953914b9f4f..f0df59b23e21 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -112,5 +112,13 @@
 			interrupts = <7>;
 			bus-width = <4>;
 		};
+
+		/* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */
+		uio_ev: uio at 0xD0000000 {
+			compatible = "generic-uio";
+			reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
+			reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
+			interrupts = <23>;
+		};
 	};
 };
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index e03413fbc784..1a9b19903c9a 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -81,6 +81,8 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_MSDOS_FS=y
-- 
2.7.4

Re: [PATCH 0/3] Updates for ARC VDK platform

[Vineet Gupta]

On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
> This series improves ARC VDK support in upstream Linux kernel by:
>  1) Removal of UP configuration which is no longer supported by ARC VDK.
>     Instead SMP platform with all but master cores halted is used to mimic
>     UP system.

Is this missing from the series ?

[PATCH 0/3] Updates for ARC VDK platform

[Vineet Gupta]

On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
> This series improves ARC VDK support in upstream Linux kernel by:
>  1) Removal of UP configuration which is no longer supported by ARC VDK.
>     Instead SMP platform with all but master cores halted is used to mimic
>     UP system.

Is this missing from the series ?

Re: [PATCH 0/3] Updates for ARC VDK platform

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01 at 09:13 -0800, Vineet Gupta wrote:
> On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
> > 
> > This series improves ARC VDK support in upstream Linux kernel by:
> >  1) Removal of UP configuration which is no longer supported by ARC VDK.
> >     Instead SMP platform with all but master cores halted is used to mimic
> >     UP system.
> 
> Is this missing from the series ?

Indeed, I was doing 2 things in parallel and so missed -1 patch :(
I may either send v2 with missing patch included or save it for another series
that ditches most of UP configs as well. What suits you better?

-Alexey

[PATCH 0/3] Updates for ARC VDK platform

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01@09:13 -0800, Vineet Gupta wrote:
> On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
> > 
> > This series improves ARC VDK support in upstream Linux kernel by:
> > ?1) Removal of UP configuration which is no longer supported by ARC VDK.
> > ????Instead SMP platform with all but master cores halted is used to mimic
> > ????UP system.
> 
> Is this missing from the series ?

Indeed, I was doing 2 things in parallel and so missed -1 patch :(
I may either send v2 with missing patch included or save it for another series
that ditches most of UP configs as well. What suits you better?

-Alexey

Re: [PATCH 0/3] Updates for ARC VDK platform

[Vineet Gupta]

On 02/01/2017 09:16 AM, Alexey Brodkin wrote:
> Hi Vineet,
>
> On Wed, 2017-02-01 at 09:13 -0800, Vineet Gupta wrote:
>> On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
>>> This series improves ARC VDK support in upstream Linux kernel by:
>>>  1) Removal of UP configuration which is no longer supported by ARC VDK.
>>>     Instead SMP platform with all but master cores halted is used to mimic
>>>     UP system.
>> Is this missing from the series ?
> Indeed, I was doing 2 things in parallel and so missed -1 patch :(
> I may either send v2 with missing patch included or save it for another series
> that ditches most of UP configs as well. What suits you better?

Latter would be better !

-Vineet

[PATCH 0/3] Updates for ARC VDK platform

[Vineet Gupta]

On 02/01/2017 09:16 AM, Alexey Brodkin wrote:
> Hi Vineet,
>
> On Wed, 2017-02-01@09:13 -0800, Vineet Gupta wrote:
>> On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
>>> This series improves ARC VDK support in upstream Linux kernel by:
>>>  1) Removal of UP configuration which is no longer supported by ARC VDK.
>>>     Instead SMP platform with all but master cores halted is used to mimic
>>>     UP system.
>> Is this missing from the series ?
> Indeed, I was doing 2 things in parallel and so missed -1 patch :(
> I may either send v2 with missing patch included or save it for another series
> that ditches most of UP configs as well. What suits you better?

Latter would be better !

-Vineet

Re: [PATCH 0/3] Updates for ARC VDK platform

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01 at 09:22 -0800, Vineet Gupta wrote:
> On 02/01/2017 09:16 AM, Alexey Brodkin wrote:
> > 
> > Hi Vineet,
> > 
> > On Wed, 2017-02-01 at 09:13 -0800, Vineet Gupta wrote:
> > > 
> > > On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
> > > > 
> > > > This series improves ARC VDK support in upstream Linux kernel by:
> > > >  1) Removal of UP configuration which is no longer supported by ARC VDK.
> > > >     Instead SMP platform with all but master cores halted is used to mimic
> > > >     UP system.
> > > Is this missing from the series ?
> > Indeed, I was doing 2 things in parallel and so missed -1 patch :(
> > I may either send v2 with missing patch included or save it for another series
> > that ditches most of UP configs as well. What suits you better?
> 
> Latter would be better !

So then you're going to apply existing series as it is sometime soon and
in the meantime I'll prepare another one, right?

-Alexey

[PATCH 0/3] Updates for ARC VDK platform

[Alexey Brodkin]

Hi Vineet,

On Wed, 2017-02-01@09:22 -0800, Vineet Gupta wrote:
> On 02/01/2017 09:16 AM, Alexey Brodkin wrote:
> > 
> > Hi Vineet,
> > 
> > On Wed, 2017-02-01@09:13 -0800, Vineet Gupta wrote:
> > > 
> > > On 02/01/2017 08:43 AM, Alexey Brodkin wrote:
> > > > 
> > > > This series improves ARC VDK support in upstream Linux kernel by:
> > > > ?1) Removal of UP configuration which is no longer supported by ARC VDK.
> > > > ????Instead SMP platform with all but master cores halted is used to mimic
> > > > ????UP system.
> > > Is this missing from the series ?
> > Indeed, I was doing 2 things in parallel and so missed -1 patch :(
> > I may either send v2 with missing patch included or save it for another series
> > that ditches most of UP configs as well. What suits you better?
> 
> Latter would be better !

So then you're going to apply existing series as it is sometime soon and
in the meantime I'll prepare another one, right?

-Alexey