[PATCH 0/4] adapt DPAA drivers for DSA

[PATCH 0/4] adapt DPAA drivers for DSA

[Madalin Bucur]

Junote Cai reported that he was not able to get a DSA setup involving the
DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node()
call in DSA setup. The initial attempt to fix this by adding of_node to the
platform device results in a second, failed, probing of the FMan MAC driver
against the new platform device created for the DPAA Ethernet driver.
Solve these issues by removing the of_node pointer from the platform device
and changing the net_dev dev to the of_device dev to ensure the DSA init
will be able to find the DPAA net_dev using of_find_net_device_by_node().
Several changes were required to enable this solution: refactoring the
adjust_link (also resulted in lesser, cleaner code) and renaming the fman
kernel modules to keep the legacy udev rules happy.


Madalin Bucur (4):
  fsl/fman: remove of_node
  dpaa_eth: move of_phy_connect() to the eth driver
  dpaa_eth: change device used
  fsl/fman: add dpaa in module names

 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c |  89 +++++++++-------
 drivers/net/ethernet/freescale/fman/Makefile   |  12 +--
 drivers/net/ethernet/freescale/fman/mac.c      | 135 +++++++------------------
 drivers/net/ethernet/freescale/fman/mac.h      |   6 +-
 4 files changed, 99 insertions(+), 143 deletions(-)

-- 
2.1.0

[PATCH 1/4] fsl/fman: remove of_node

[Madalin Bucur]

The FMan MAC driver allocates a platform device for the Ethernet
driver to probe on. Setting pdev->dev.of_node with the MAC node
triggers the MAC driver probing of the new platform device. While
this fails quickly and does not affect the functionality of the
drivers, it is incorrect and must be removed. This was added to
address a report that DSA code using of_find_net_device_by_node()
is unable to use the DPAA interfaces. Error message seen before
this fix:

fsl_mac dpaa-ethernet.0: __devm_request_mem_region(mac) failed
fsl_mac: probe of dpaa-ethernet.0 failed with error -16

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/fman/mac.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 387eb4a..9a265f8 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -623,7 +623,6 @@ static struct platform_device *dpaa_eth_add_device(int fman_id,
 		goto no_mem;
 	}
 
-	pdev->dev.of_node = node;
 	pdev->dev.parent = priv->dev;
 	set_dma_ops(&pdev->dev, get_dma_ops(priv->dev));
 
-- 
2.1.0

[PATCH 2/4] dpaa_eth: move of_phy_connect() to the eth driver

[Madalin Bucur]

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 48 +++++++++++--
 drivers/net/ethernet/freescale/fman/mac.c      | 97 ++++++--------------------
 drivers/net/ethernet/freescale/fman/mac.h      |  5 +-
 3 files changed, 66 insertions(+), 84 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 4225806..7cf61d6 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2435,6 +2435,48 @@ static void dpaa_eth_napi_disable(struct dpaa_priv *priv)
 	}
 }
 
+static void dpaa_adjust_link(struct net_device *net_dev)
+{
+	struct mac_device *mac_dev;
+	struct dpaa_priv *priv;
+
+	priv = netdev_priv(net_dev);
+	mac_dev = priv->mac_dev;
+	mac_dev->adjust_link(mac_dev);
+}
+
+static int dpaa_phy_init(struct net_device *net_dev)
+{
+	struct mac_device *mac_dev;
+	struct phy_device *phy_dev;
+	struct dpaa_priv *priv;
+
+	priv = netdev_priv(net_dev);
+	mac_dev = priv->mac_dev;
+
+	phy_dev = of_phy_connect(net_dev, mac_dev->phy_node,
+				 &dpaa_adjust_link, 0,
+				 mac_dev->phy_if);
+	if (!phy_dev) {
+		netif_err(priv, ifup, net_dev, "init_phy() failed\n");
+		return -ENODEV;
+	}
+
+	/* Remove any features not supported by the controller */
+	phy_dev->supported &= mac_dev->if_support;
+
+	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
+	 * as most of the PHY drivers do not enable them by default.
+	 */
+	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+	phy_dev->advertising = phy_dev->supported;
+
+	mac_dev->phy_dev = phy_dev;
+	net_dev->phydev = phy_dev;
+
+	return 0;
+}
+
 static int dpaa_open(struct net_device *net_dev)
 {
 	struct mac_device *mac_dev;
@@ -2445,12 +2487,8 @@ static int dpaa_open(struct net_device *net_dev)
 	mac_dev = priv->mac_dev;
 	dpaa_eth_napi_enable(priv);
 
-	net_dev->phydev = mac_dev->init_phy(net_dev, priv->mac_dev);
-	if (!net_dev->phydev) {
-		netif_err(priv, ifup, net_dev, "init_phy() failed\n");
-		err = -ENODEV;
+	if (dpaa_phy_init(net_dev))
 		goto phy_init_failed;
-	}
 
 	for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
 		err = fman_port_enable(mac_dev->port[i]);
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index 9a265f8..a0a3107 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -57,9 +57,7 @@ struct mac_priv_s {
 	struct device			*dev;
 	void __iomem			*vaddr;
 	u8				cell_index;
-	phy_interface_t			phy_if;
 	struct fman			*fman;
-	struct device_node		*phy_node;
 	struct device_node		*internal_phy_node;
 	/* List of multicast addresses */
 	struct list_head		mc_addr_list;
@@ -106,7 +104,7 @@ static void set_fman_mac_params(struct mac_device *mac_dev,
 			     resource_size(mac_dev->res));
 	memcpy(&params->addr, mac_dev->addr, sizeof(mac_dev->addr));
 	params->max_speed	= priv->max_speed;
-	params->phy_if		= priv->phy_if;
+	params->phy_if		= mac_dev->phy_if;
 	params->basex_if	= false;
 	params->mac_id		= priv->cell_index;
 	params->fm		= (void *)priv->fman;
@@ -419,15 +417,12 @@ void fman_get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause,
 }
 EXPORT_SYMBOL(fman_get_pause_cfg);
 
-static void adjust_link_void(struct net_device *net_dev)
+static void adjust_link_void(struct mac_device *mac_dev)
 {
 }
 
-static void adjust_link_dtsec(struct net_device *net_dev)
+static void adjust_link_dtsec(struct mac_device *mac_dev)
 {
-	struct device *dev = net_dev->dev.parent;
-	struct dpaa_eth_data *eth_data = dev->platform_data;
-	struct mac_device *mac_dev = eth_data->mac_dev;
 	struct phy_device *phy_dev = mac_dev->phy_dev;
 	struct fman_mac *fman_mac;
 	bool rx_pause, tx_pause;
@@ -444,14 +439,12 @@ static void adjust_link_dtsec(struct net_device *net_dev)
 	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
 	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
 	if (err < 0)
-		netdev_err(net_dev, "fman_set_mac_active_pause() = %d\n", err);
+		dev_err(mac_dev->priv->dev, "fman_set_mac_active_pause() = %d\n",
+			err);
 }
 
-static void adjust_link_memac(struct net_device *net_dev)
+static void adjust_link_memac(struct mac_device *mac_dev)
 {
-	struct device *dev = net_dev->dev.parent;
-	struct dpaa_eth_data *eth_data = dev->platform_data;
-	struct mac_device *mac_dev = eth_data->mac_dev;
 	struct phy_device *phy_dev = mac_dev->phy_dev;
 	struct fman_mac *fman_mac;
 	bool rx_pause, tx_pause;
@@ -463,60 +456,12 @@ static void adjust_link_memac(struct net_device *net_dev)
 	fman_get_pause_cfg(mac_dev, &rx_pause, &tx_pause);
 	err = fman_set_mac_active_pause(mac_dev, rx_pause, tx_pause);
 	if (err < 0)
-		netdev_err(net_dev, "fman_set_mac_active_pause() = %d\n", err);
-}
-
-/* Initializes driver's PHY state, and attaches to the PHY.
- * Returns 0 on success.
- */
-static struct phy_device *init_phy(struct net_device *net_dev,
-				   struct mac_device *mac_dev,
-				   void (*adj_lnk)(struct net_device *))
-{
-	struct phy_device	*phy_dev;
-	struct mac_priv_s	*priv = mac_dev->priv;
-
-	phy_dev = of_phy_connect(net_dev, priv->phy_node, adj_lnk, 0,
-				 priv->phy_if);
-	if (!phy_dev) {
-		netdev_err(net_dev, "Could not connect to PHY\n");
-		return NULL;
-	}
-
-	/* Remove any features not supported by the controller */
-	phy_dev->supported &= mac_dev->if_support;
-	/* Enable the symmetric and asymmetric PAUSE frame advertisements,
-	 * as most of the PHY drivers do not enable them by default.
-	 */
-	phy_dev->supported |= (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-	phy_dev->advertising = phy_dev->supported;
-
-	mac_dev->phy_dev = phy_dev;
-
-	return phy_dev;
-}
-
-static struct phy_device *dtsec_init_phy(struct net_device *net_dev,
-					 struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, &adjust_link_dtsec);
-}
-
-static struct phy_device *tgec_init_phy(struct net_device *net_dev,
-					struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, adjust_link_void);
-}
-
-static struct phy_device *memac_init_phy(struct net_device *net_dev,
-					 struct mac_device *mac_dev)
-{
-	return init_phy(net_dev, mac_dev, &adjust_link_memac);
+		dev_err(mac_dev->priv->dev, "fman_set_mac_active_pause() = %d\n",
+			err);
 }
 
 static void setup_dtsec(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= dtsec_init_phy;
 	mac_dev->init			= dtsec_initialization;
 	mac_dev->set_promisc		= dtsec_set_promiscuous;
 	mac_dev->change_addr		= dtsec_modify_mac_address;
@@ -528,14 +473,13 @@ static void setup_dtsec(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_dtsec;
 	mac_dev->priv->enable		= dtsec_enable;
 	mac_dev->priv->disable		= dtsec_disable;
 }
 
 static void setup_tgec(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= tgec_init_phy;
 	mac_dev->init			= tgec_initialization;
 	mac_dev->set_promisc		= tgec_set_promiscuous;
 	mac_dev->change_addr		= tgec_modify_mac_address;
@@ -547,14 +491,13 @@ static void setup_tgec(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_void;
 	mac_dev->priv->enable		= tgec_enable;
 	mac_dev->priv->disable		= tgec_disable;
 }
 
 static void setup_memac(struct mac_device *mac_dev)
 {
-	mac_dev->init_phy		= memac_init_phy;
 	mac_dev->init			= memac_initialization;
 	mac_dev->set_promisc		= memac_set_promiscuous;
 	mac_dev->change_addr		= memac_modify_mac_address;
@@ -566,7 +509,7 @@ static void setup_memac(struct mac_device *mac_dev)
 	mac_dev->set_multi		= set_multi;
 	mac_dev->start			= start;
 	mac_dev->stop			= stop;
-
+	mac_dev->adjust_link            = adjust_link_memac;
 	mac_dev->priv->enable		= memac_enable;
 	mac_dev->priv->disable		= memac_disable;
 }
@@ -850,13 +793,13 @@ static int mac_probe(struct platform_device *_of_dev)
 			 mac_node);
 		phy_if = PHY_INTERFACE_MODE_SGMII;
 	}
-	priv->phy_if = phy_if;
+	mac_dev->phy_if = phy_if;
 
-	priv->speed		= phy2speed[priv->phy_if];
+	priv->speed		= phy2speed[mac_dev->phy_if];
 	priv->max_speed		= priv->speed;
 	mac_dev->if_support	= DTSEC_SUPPORTED;
 	/* We don't support half-duplex in SGMII mode */
-	if (priv->phy_if == PHY_INTERFACE_MODE_SGMII)
+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_SGMII)
 		mac_dev->if_support &= ~(SUPPORTED_10baseT_Half |
 					SUPPORTED_100baseT_Half);
 
@@ -865,12 +808,12 @@ static int mac_probe(struct platform_device *_of_dev)
 		mac_dev->if_support |= SUPPORTED_1000baseT_Full;
 
 	/* The 10G interface only supports one mode */
-	if (priv->phy_if == PHY_INTERFACE_MODE_XGMII)
+	if (mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
 		mac_dev->if_support = SUPPORTED_10000baseT_Full;
 
 	/* Get the rest of the PHY information */
-	priv->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
-	if (!priv->phy_node && of_phy_is_fixed_link(mac_node)) {
+	mac_dev->phy_node = of_parse_phandle(mac_node, "phy-handle", 0);
+	if (!mac_dev->phy_node && of_phy_is_fixed_link(mac_node)) {
 		struct phy_device *phy;
 
 		err = of_phy_register_fixed_link(mac_node);
@@ -884,8 +827,8 @@ static int mac_probe(struct platform_device *_of_dev)
 			goto _return_dev_set_drvdata;
 		}
 
-		priv->phy_node = of_node_get(mac_node);
-		phy = of_phy_find_device(priv->phy_node);
+		mac_dev->phy_node = of_node_get(mac_node);
+		phy = of_phy_find_device(mac_dev->phy_node);
 		if (!phy) {
 			err = -EINVAL;
 			goto _return_dev_set_drvdata;
@@ -903,7 +846,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	err = mac_dev->init(mac_dev);
 	if (err < 0) {
 		dev_err(dev, "mac_dev->init() = %d\n", err);
-		of_node_put(priv->phy_node);
+		of_node_put(mac_dev->phy_node);
 		goto _return_dev_set_drvdata;
 	}
 
diff --git a/drivers/net/ethernet/freescale/fman/mac.h b/drivers/net/ethernet/freescale/fman/mac.h
index d7313f0..1ca85a1 100644
--- a/drivers/net/ethernet/freescale/fman/mac.h
+++ b/drivers/net/ethernet/freescale/fman/mac.h
@@ -50,6 +50,8 @@ struct mac_device {
 	struct fman_port	*port[2];
 	u32			 if_support;
 	struct phy_device	*phy_dev;
+	phy_interface_t		phy_if;
+	struct device_node	*phy_node;
 
 	bool autoneg_pause;
 	bool rx_pause_req;
@@ -58,11 +60,10 @@ struct mac_device {
 	bool tx_pause_active;
 	bool promisc;
 
-	struct phy_device *(*init_phy)(struct net_device *net_dev,
-				       struct mac_device *mac_dev);
 	int (*init)(struct mac_device *mac_dev);
 	int (*start)(struct mac_device *mac_dev);
 	int (*stop)(struct mac_device *mac_dev);
+	void (*adjust_link)(struct mac_device *mac_dev);
 	int (*set_promisc)(struct fman_mac *mac_dev, bool enable);
 	int (*change_addr)(struct fman_mac *mac_dev, enet_addr_t *enet_addr);
 	int (*set_multi)(struct net_device *net_dev,
-- 
2.1.0

[PATCH 3/4] dpaa_eth: change device used

[Madalin Bucur]

Change device used for DMA mapping to the MAC device that is an
of_device, with proper DMA ops. Using this device for the netdevice
should also address the issue with DSA scenarios that need the
netdevice to be backed by an of_device.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 41 ++++++++------------------
 drivers/net/ethernet/freescale/fman/mac.c      | 37 ++++++++++-------------
 drivers/net/ethernet/freescale/fman/mac.h      |  1 -
 3 files changed, 27 insertions(+), 52 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 7cf61d6..428ef2b 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -385,34 +385,19 @@ static int dpaa_setup_tc(struct net_device *net_dev, enum tc_setup_type type,
 
 static struct mac_device *dpaa_mac_dev_get(struct platform_device *pdev)
 {
-	struct platform_device *of_dev;
 	struct dpaa_eth_data *eth_data;
-	struct device *dpaa_dev, *dev;
-	struct device_node *mac_node;
+	struct device *dpaa_dev;
 	struct mac_device *mac_dev;
 
 	dpaa_dev = &pdev->dev;
 	eth_data = dpaa_dev->platform_data;
-	if (!eth_data)
+	if (!eth_data) {
+		dev_err(dpaa_dev, "eth_data missing\n");
 		return ERR_PTR(-ENODEV);
-
-	mac_node = eth_data->mac_node;
-
-	of_dev = of_find_device_by_node(mac_node);
-	if (!of_dev) {
-		dev_err(dpaa_dev, "of_find_device_by_node(%pOF) failed\n",
-			mac_node);
-		of_node_put(mac_node);
-		return ERR_PTR(-EINVAL);
 	}
-	of_node_put(mac_node);
-
-	dev = &of_dev->dev;
-
-	mac_dev = dev_get_drvdata(dev);
+	mac_dev = eth_data->mac_dev;
 	if (!mac_dev) {
-		dev_err(dpaa_dev, "dev_get_drvdata(%s) failed\n",
-			dev_name(dev));
+		dev_err(dpaa_dev, "mac_dev missing\n");
 		return ERR_PTR(-EINVAL);
 	}
 
@@ -2696,7 +2681,13 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	int err = 0, i, channel;
 	struct device *dev;
 
-	dev = &pdev->dev;
+	/* device used for DMA mapping */
+	dev = pdev->dev.parent;
+	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
+	if (err) {
+		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
+		goto dev_mask_failed;
+	}
 
 	/* Allocate this early, so we can store relevant information in
 	 * the private area
@@ -2738,14 +2729,6 @@ static int dpaa_eth_probe(struct platform_device *pdev)
 	priv->buf_layout[RX].priv_data_size = DPAA_RX_PRIV_DATA_SIZE; /* Rx */
 	priv->buf_layout[TX].priv_data_size = DPAA_TX_PRIV_DATA_SIZE; /* Tx */
 
-	/* device used for DMA mapping */
-	set_dma_ops(dev, get_dma_ops(&pdev->dev));
-	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
-	if (err) {
-		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
-		goto dev_mask_failed;
-	}
-
 	/* bp init */
 	for (i = 0; i < DPAA_BPS_NUM; i++) {
 		int err;
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index a0a3107..1d6da1e 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -542,8 +542,7 @@ static const u16 phy2speed[] = {
 };
 
 static struct platform_device *dpaa_eth_add_device(int fman_id,
-						   struct mac_device *mac_dev,
-						   struct device_node *node)
+						   struct mac_device *mac_dev)
 {
 	struct platform_device *pdev;
 	struct dpaa_eth_data data;
@@ -556,10 +555,8 @@ static struct platform_device *dpaa_eth_add_device(int fman_id,
 	data.mac_dev = mac_dev;
 	data.mac_hw_id = priv->cell_index;
 	data.fman_hw_id = fman_id;
-	data.mac_node = node;
 
 	mutex_lock(&eth_lock);
-
 	pdev = platform_device_alloc("dpaa-ethernet", dpaa_eth_dev_cnt);
 	if (!pdev) {
 		ret = -ENOMEM;
@@ -648,9 +645,6 @@ static int mac_probe(struct platform_device *_of_dev)
 		goto _return;
 	}
 
-	/* Register mac_dev */
-	dev_set_drvdata(dev, mac_dev);
-
 	INIT_LIST_HEAD(&priv->mc_addr_list);
 
 	/* Get the FM node */
@@ -659,7 +653,7 @@ static int mac_probe(struct platform_device *_of_dev)
 		dev_err(dev, "of_get_parent(%pOF) failed\n",
 			mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	of_dev = of_find_device_by_node(dev_node);
@@ -693,7 +687,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (err < 0) {
 		dev_err(dev, "of_address_to_resource(%pOF) = %d\n",
 			mac_node, err);
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	mac_dev->res = __devm_request_region(dev,
@@ -703,7 +697,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (!mac_dev->res) {
 		dev_err(dev, "__devm_request_mem_region(mac) failed\n");
 		err = -EBUSY;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	priv->vaddr = devm_ioremap(dev, mac_dev->res->start,
@@ -711,7 +705,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (!priv->vaddr) {
 		dev_err(dev, "devm_ioremap() failed\n");
 		err = -EIO;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	if (!of_device_is_available(mac_node)) {
@@ -728,7 +722,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (err) {
 		dev_err(dev, "failed to read cell-index for %pOF\n", mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 	priv->cell_index = (u8)val;
 
@@ -737,7 +731,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (!mac_addr) {
 		dev_err(dev, "of_get_mac_address(%pOF) failed\n", mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 	memcpy(mac_dev->addr, mac_addr, sizeof(mac_dev->addr));
 
@@ -747,14 +741,14 @@ static int mac_probe(struct platform_device *_of_dev)
 		dev_err(dev, "of_count_phandle_with_args(%pOF, fsl,fman-ports) failed\n",
 			mac_node);
 		err = nph;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	if (nph != ARRAY_SIZE(mac_dev->port)) {
 		dev_err(dev, "Not supported number of fman-ports handles of mac node %pOF from device tree\n",
 			mac_node);
 		err = -EINVAL;
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	for (i = 0; i < ARRAY_SIZE(mac_dev->port); i++) {
@@ -818,20 +812,20 @@ static int mac_probe(struct platform_device *_of_dev)
 
 		err = of_phy_register_fixed_link(mac_node);
 		if (err)
-			goto _return_dev_set_drvdata;
+			goto _return_of_get_parent;
 
 		priv->fixed_link = kzalloc(sizeof(*priv->fixed_link),
 					   GFP_KERNEL);
 		if (!priv->fixed_link) {
 			err = -ENOMEM;
-			goto _return_dev_set_drvdata;
+			goto _return_of_get_parent;
 		}
 
 		mac_dev->phy_node = of_node_get(mac_node);
 		phy = of_phy_find_device(mac_dev->phy_node);
 		if (!phy) {
 			err = -EINVAL;
-			goto _return_dev_set_drvdata;
+			goto _return_of_get_parent;
 		}
 
 		priv->fixed_link->link = phy->link;
@@ -847,7 +841,7 @@ static int mac_probe(struct platform_device *_of_dev)
 	if (err < 0) {
 		dev_err(dev, "mac_dev->init() = %d\n", err);
 		of_node_put(mac_dev->phy_node);
-		goto _return_dev_set_drvdata;
+		goto _return_of_get_parent;
 	}
 
 	/* pause frame autonegotiation enabled */
@@ -868,7 +862,7 @@ static int mac_probe(struct platform_device *_of_dev)
 		 mac_dev->addr[0], mac_dev->addr[1], mac_dev->addr[2],
 		 mac_dev->addr[3], mac_dev->addr[4], mac_dev->addr[5]);
 
-	priv->eth_dev = dpaa_eth_add_device(fman_id, mac_dev, mac_node);
+	priv->eth_dev = dpaa_eth_add_device(fman_id, mac_dev);
 	if (IS_ERR(priv->eth_dev)) {
 		dev_err(dev, "failed to add Ethernet platform device for MAC %d\n",
 			priv->cell_index);
@@ -879,9 +873,8 @@ static int mac_probe(struct platform_device *_of_dev)
 
 _return_of_node_put:
 	of_node_put(dev_node);
-_return_dev_set_drvdata:
+_return_of_get_parent:
 	kfree(priv->fixed_link);
-	dev_set_drvdata(dev, NULL);
 _return:
 	return err;
 }
diff --git a/drivers/net/ethernet/freescale/fman/mac.h b/drivers/net/ethernet/freescale/fman/mac.h
index 1ca85a1..eefb335 100644
--- a/drivers/net/ethernet/freescale/fman/mac.h
+++ b/drivers/net/ethernet/freescale/fman/mac.h
@@ -83,7 +83,6 @@ struct mac_device {
 };
 
 struct dpaa_eth_data {
-	struct device_node *mac_node;
 	struct mac_device *mac_dev;
 	int mac_hw_id;
 	int fman_hw_id;
-- 
2.1.0

[PATCH 4/4] fsl/fman: add dpaa in module names

[Madalin Bucur]

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/fman/Makefile | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fman/Makefile b/drivers/net/ethernet/freescale/fman/Makefile
index 2c38119..4ae524a 100644
--- a/drivers/net/ethernet/freescale/fman/Makefile
+++ b/drivers/net/ethernet/freescale/fman/Makefile
@@ -1,9 +1,9 @@
 subdir-ccflags-y +=  -I$(srctree)/drivers/net/ethernet/freescale/fman
 
-obj-$(CONFIG_FSL_FMAN) += fsl_fman.o
-obj-$(CONFIG_FSL_FMAN) += fsl_fman_port.o
-obj-$(CONFIG_FSL_FMAN) += fsl_mac.o
+obj-$(CONFIG_FSL_FMAN) += fsl_dpaa_fman.o
+obj-$(CONFIG_FSL_FMAN) += fsl_dpaa_fman_port.o
+obj-$(CONFIG_FSL_FMAN) += fsl_dpaa_mac.o
 
-fsl_fman-objs	:= fman_muram.o fman.o fman_sp.o fman_keygen.o
-fsl_fman_port-objs := fman_port.o
-fsl_mac-objs:= mac.o fman_dtsec.o fman_memac.o fman_tgec.o
+fsl_dpaa_fman-objs	:= fman_muram.o fman.o fman_sp.o fman_keygen.o
+fsl_dpaa_fman_port-objs := fman_port.o
+fsl_dpaa_mac-objs:= mac.o fman_dtsec.o fman_memac.o fman_tgec.o
-- 
2.1.0

Re: [PATCH 3/4] dpaa_eth: change device used

[David Miller]

From: Madalin Bucur <madalin.bucur@nxp.com>
Date: Tue, 10 Oct 2017 17:10:17 +0300

> @@ -2696,7 +2681,13 @@ static int dpaa_eth_probe(struct platform_device *pdev)
>  	int err = 0, i, channel;
>  	struct device *dev;
>  
> -	dev = &pdev->dev;
> +	/* device used for DMA mapping */
> +	dev = pdev->dev.parent;
> +	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
> +	if (err) {
> +		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
> +		goto dev_mask_failed;
> +	}
>  
>  	/* Allocate this early, so we can store relevant information in
>  	 * the private area

Since you are moving this code up before the netdev allocation, you must
adjust the failure path goto label used.

Your change as-is will cause an OOPS because we'll pass a NULL pointer
to free_netdev().

RE: [PATCH 3/4] dpaa_eth: change device used

[Madalin-cristian Bucur]

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Thursday, October 12, 2017 12:02 AM
> To: Madalin-cristian Bucur <madalin.bucur@nxp.com>
> Subject: Re: [PATCH 3/4] dpaa_eth: change device used
> 
> From: Madalin Bucur <madalin.bucur@nxp.com>
> Date: Tue, 10 Oct 2017 17:10:17 +0300
> 
> > @@ -2696,7 +2681,13 @@ static int dpaa_eth_probe(struct platform_device
> *pdev)
> >  	int err = 0, i, channel;
> >  	struct device *dev;
> >
> > -	dev = &pdev->dev;
> > +	/* device used for DMA mapping */
> > +	dev = pdev->dev.parent;
> > +	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
> > +	if (err) {
> > +		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
> > +		goto dev_mask_failed;
> > +	}
> >
> >  	/* Allocate this early, so we can store relevant information in
> >  	 * the private area
> 
> Since you are moving this code up before the netdev allocation, you must
> adjust the failure path goto label used.
> 
> Your change as-is will cause an OOPS because we'll pass a NULL pointer
> to free_netdev().

Thank you, besides this new issue I was introducing I see there other problems,
I'll include a cleanup of these error paths in v2.

Madalin

RE: [PATCH 3/4] dpaa_eth: change device used

[Madalin-cristian Bucur]

> -----Original Message-----
> From: David Miller [mailto:davem@davemloft.net]
> Sent: Thursday, October 12, 2017 12:02 AM
> To: Madalin-cristian Bucur <madalin.bucur@nxp.com>
> Subject: Re: [PATCH 3/4] dpaa_eth: change device used
> 
> From: Madalin Bucur <madalin.bucur@nxp.com>
> Date: Tue, 10 Oct 2017 17:10:17 +0300
> 
> > @@ -2696,7 +2681,13 @@ static int dpaa_eth_probe(struct platform_device
> *pdev)
> >  	int err = 0, i, channel;
> >  	struct device *dev;
> >
> > -	dev = &pdev->dev;
> > +	/* device used for DMA mapping */
> > +	dev = pdev->dev.parent;
> > +	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
> > +	if (err) {
> > +		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
> > +		goto dev_mask_failed;
> > +	}
> >
> >  	/* Allocate this early, so we can store relevant information in
> >  	 * the private area
> 
> Since you are moving this code up before the netdev allocation, you must
> adjust the failure path goto label used.
> 
> Your change as-is will cause an OOPS because we'll pass a NULL pointer
> to free_netdev().

Thank you, besides this new issue I was introducing I see there other problems,
I'll include a cleanup of these error paths in v2.

Madalin