[PATCH 0/9] wil6210 patches

[PATCH 0/9] wil6210 patches

[Maya Erez]

The following patches include several wil6210 fixes.

Dedy Lansky (2):
  wil6210: support Scheduled scan
  wil6210: remove leftover "FIXME"s

Lazar Alexei (2):
  wil6210: support 40bit DMA addresses
  wil6210: add support for headroom configuration

Lior David (2):
  wil6210: configurable broadcast TX MCS
  wil6210: remove reference to preset_chandef

Maya Erez (3):
  wil6210: add platform capabilities bitmap
  wil6210: set platform features based on FW capabilities
  wil6210: prevent parallel suspend and dump collection

 drivers/net/wireless/ath/wil6210/cfg80211.c       |  68 +++++-
 drivers/net/wireless/ath/wil6210/debugfs.c        |   1 -
 drivers/net/wireless/ath/wil6210/interrupt.c      |   2 +-
 drivers/net/wireless/ath/wil6210/main.c           |  67 +++++-
 drivers/net/wireless/ath/wil6210/netdev.c         |   2 +-
 drivers/net/wireless/ath/wil6210/pcie_bus.c       |  36 +++-
 drivers/net/wireless/ath/wil6210/pm.c             |  17 ++
 drivers/net/wireless/ath/wil6210/pmc.c            |  11 +-
 drivers/net/wireless/ath/wil6210/txrx.c           | 101 ++++++++-
 drivers/net/wireless/ath/wil6210/wil6210.h        |  15 +-
 drivers/net/wireless/ath/wil6210/wil_crash_dump.c |  11 +
 drivers/net/wireless/ath/wil6210/wil_platform.h   |  15 +-
 drivers/net/wireless/ath/wil6210/wmi.c            | 243 +++++++++++++++++++++-
 drivers/net/wireless/ath/wil6210/wmi.h            | 100 +++++++--
 14 files changed, 621 insertions(+), 68 deletions(-)

-- 
1.9.1

[PATCH 1/9] wil6210: support Scheduled scan

[Maya Erez]

From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>

Add support for sched_scan_start/stop by sending PNO commands to FW.
Driver reports WIPHY_FLAG_SUPPORTS_SCHED_SCAN and invokes
cfg80211_sched_scan_results upon receiving
WMI_SCHED_SCAN_RESULT_EVENTID from FW.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |  65 ++++++++
 drivers/net/wireless/ath/wil6210/main.c     |   8 +
 drivers/net/wireless/ath/wil6210/wil6210.h  |   4 +
 drivers/net/wireless/ath/wil6210/wmi.c      | 239 +++++++++++++++++++++++++++-
 drivers/net/wireless/ath/wil6210/wmi.h      |  99 +++++++++---
 5 files changed, 395 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 771a534..39509d0 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1751,6 +1751,69 @@ static int wil_cfg80211_resume(struct wiphy *wiphy)
 	return 0;
 }
 
+static int
+wil_cfg80211_sched_scan_start(struct wiphy *wiphy,
+			      struct net_device *dev,
+			      struct cfg80211_sched_scan_request *request)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int i, rc;
+
+	wil_dbg_misc(wil,
+		     "sched scan start: n_ssids %d, ie_len %zu, flags 0x%x\n",
+		     request->n_ssids, request->ie_len, request->flags);
+	for (i = 0; i < request->n_ssids; i++) {
+		wil_dbg_misc(wil, "SSID[%d]:", i);
+		wil_hex_dump_misc("SSID ", DUMP_PREFIX_OFFSET, 16, 1,
+				  request->ssids[i].ssid,
+				  request->ssids[i].ssid_len, true);
+	}
+	wil_dbg_misc(wil, "channels:");
+	for (i = 0; i < request->n_channels; i++)
+		wil_dbg_misc(wil, " %d%s", request->channels[i]->hw_value,
+			     i == request->n_channels - 1 ? "\n" : "");
+	wil_dbg_misc(wil, "n_match_sets %d, min_rssi_thold %d, delay %d\n",
+		     request->n_match_sets, request->min_rssi_thold,
+		     request->delay);
+	for (i = 0; i < request->n_match_sets; i++) {
+		struct cfg80211_match_set *ms = &request->match_sets[i];
+
+		wil_dbg_misc(wil, "MATCHSET[%d]: rssi_thold %d\n",
+			     i, ms->rssi_thold);
+		wil_hex_dump_misc("SSID ", DUMP_PREFIX_OFFSET, 16, 1,
+				  ms->ssid.ssid,
+				  ms->ssid.ssid_len, true);
+	}
+	wil_dbg_misc(wil, "n_scan_plans %d\n", request->n_scan_plans);
+	for (i = 0; i < request->n_scan_plans; i++) {
+		struct cfg80211_sched_scan_plan *sp = &request->scan_plans[i];
+
+		wil_dbg_misc(wil, "SCAN PLAN[%d]: interval %d iterations %d\n",
+			     i, sp->interval, sp->iterations);
+	}
+
+	rc = wmi_set_ie(wil, WMI_FRAME_PROBE_REQ, request->ie_len, request->ie);
+	if (rc)
+		return rc;
+	return wmi_start_sched_scan(wil, request);
+}
+
+static int
+wil_cfg80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev,
+			     u64 reqid)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	int rc;
+
+	rc = wmi_stop_sched_scan(wil);
+	/* device would return error if it thinks PNO is already stopped.
+	 * ignore the return code so user space and driver gets back in-sync
+	 */
+	wil_dbg_misc(wil, "sched scan stopped (%d)\n", rc);
+
+	return 0;
+}
+
 static const struct cfg80211_ops wil_cfg80211_ops = {
 	.add_virtual_intf = wil_cfg80211_add_iface,
 	.del_virtual_intf = wil_cfg80211_del_iface,
@@ -1784,6 +1847,8 @@ static int wil_cfg80211_resume(struct wiphy *wiphy)
 	.set_power_mgmt = wil_cfg80211_set_power_mgmt,
 	.suspend = wil_cfg80211_suspend,
 	.resume = wil_cfg80211_resume,
+	.sched_scan_start = wil_cfg80211_sched_scan_start,
+	.sched_scan_stop = wil_cfg80211_sched_scan_stop,
 };
 
 static void wil_wiphy_init(struct wiphy *wiphy)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 1b53cd3..5d69796 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -785,6 +785,14 @@ void wil_refresh_fw_capabilities(struct wil6210_priv *wil)
 		wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
 	else
 		wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+
+	if (test_bit(WMI_FW_CAPABILITY_PNO, wil->fw_capabilities)) {
+		wiphy->max_sched_scan_reqs = 1;
+		wiphy->max_sched_scan_ssids = WMI_MAX_PNO_SSID_NUM;
+		wiphy->max_match_sets = WMI_MAX_PNO_SSID_NUM;
+		wiphy->max_sched_scan_ie_len = WMI_MAX_IE_LEN;
+		wiphy->max_sched_scan_plans = WMI_MAX_PLANS_NUM;
+	}
 }
 
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index cf27d97..aa85e9c 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1032,4 +1032,8 @@ int wil_request_firmware(struct wil6210_priv *wil, const char *name,
 void wil6210_set_halp(struct wil6210_priv *wil);
 void wil6210_clear_halp(struct wil6210_priv *wil);
 
+int wmi_start_sched_scan(struct wil6210_priv *wil,
+			 struct cfg80211_sched_scan_request *request);
+int wmi_stop_sched_scan(struct wil6210_priv *wil);
+
 #endif /* __WIL6210_H__ */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 8ace618..ed7cdb7 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -38,6 +38,7 @@
 		 " 60G device led enablement. Set the led ID (0-2) to enable");
 
 #define WIL_WAIT_FOR_SUSPEND_RESUME_COMP 200
+#define WIL_WMI_CALL_GENERAL_TO_MS 100
 
 /**
  * WMI event receiving - theory of operations
@@ -314,6 +315,10 @@ static const char *cmdid2name(u16 cmdid)
 		return "WMI_LINK_MAINTAIN_CFG_WRITE_CMD";
 	case WMI_LO_POWER_CALIB_FROM_OTP_CMDID:
 		return "WMI_LO_POWER_CALIB_FROM_OTP_CMD";
+	case WMI_START_SCHED_SCAN_CMDID:
+		return "WMI_START_SCHED_SCAN_CMD";
+	case WMI_STOP_SCHED_SCAN_CMDID:
+		return "WMI_STOP_SCHED_SCAN_CMD";
 	default:
 		return "Untracked CMD";
 	}
@@ -428,6 +433,12 @@ static const char *eventid2name(u16 eventid)
 		return "WMI_LINK_MAINTAIN_CFG_WRITE_DONE_EVENT";
 	case WMI_LO_POWER_CALIB_FROM_OTP_EVENTID:
 		return "WMI_LO_POWER_CALIB_FROM_OTP_EVENT";
+	case WMI_START_SCHED_SCAN_EVENTID:
+		return "WMI_START_SCHED_SCAN_EVENT";
+	case WMI_STOP_SCHED_SCAN_EVENTID:
+		return "WMI_STOP_SCHED_SCAN_EVENT";
+	case WMI_SCHED_SCAN_RESULT_EVENTID:
+		return "WMI_SCHED_SCAN_RESULT_EVENT";
 	default:
 		return "Untracked EVENT";
 	}
@@ -658,8 +669,6 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
 		wil_hex_dump_wmi("IE ", DUMP_PREFIX_OFFSET, 16, 1, ie_buf,
 				 ie_len, true);
 
-		wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap);
-
 		bss = cfg80211_inform_bss_frame(wiphy, channel, rx_mgmt_frame,
 						d_len, signal, GFP_KERNEL);
 		if (bss) {
@@ -1066,6 +1075,75 @@ static void wmi_evt_delba(struct wil6210_priv *wil, int id, void *d, int len)
 	spin_unlock_bh(&sta->tid_rx_lock);
 }
 
+static void
+wmi_evt_sched_scan_result(struct wil6210_priv *wil, int id, void *d, int len)
+{
+	struct wmi_sched_scan_result_event *data = d;
+	struct wiphy *wiphy = wil_to_wiphy(wil);
+	struct ieee80211_mgmt *rx_mgmt_frame =
+		(struct ieee80211_mgmt *)data->payload;
+	int flen = len - offsetof(struct wmi_sched_scan_result_event, payload);
+	int ch_no;
+	u32 freq;
+	struct ieee80211_channel *channel;
+	s32 signal;
+	__le16 fc;
+	u32 d_len;
+	struct cfg80211_bss *bss;
+
+	if (flen < 0) {
+		wil_err(wil, "sched scan result event too short, len %d\n",
+			len);
+		return;
+	}
+
+	d_len = le32_to_cpu(data->info.len);
+	if (d_len != flen) {
+		wil_err(wil,
+			"sched scan result length mismatch, d_len %d should be %d\n",
+			d_len, flen);
+		return;
+	}
+
+	fc = rx_mgmt_frame->frame_control;
+	if (!ieee80211_is_probe_resp(fc)) {
+		wil_err(wil, "sched scan result invalid frame, fc 0x%04x\n",
+			fc);
+		return;
+	}
+
+	ch_no = data->info.channel + 1;
+	freq = ieee80211_channel_to_frequency(ch_no, NL80211_BAND_60GHZ);
+	channel = ieee80211_get_channel(wiphy, freq);
+	if (test_bit(WMI_FW_CAPABILITY_RSSI_REPORTING, wil->fw_capabilities))
+		signal = 100 * data->info.rssi;
+	else
+		signal = data->info.sqi;
+
+	wil_dbg_wmi(wil, "sched scan result: channel %d MCS %d RSSI %d\n",
+		    data->info.channel, data->info.mcs, data->info.rssi);
+	wil_dbg_wmi(wil, "len %d qid %d mid %d cid %d\n",
+		    d_len, data->info.qid, data->info.mid, data->info.cid);
+	wil_hex_dump_wmi("PROBE ", DUMP_PREFIX_OFFSET, 16, 1, rx_mgmt_frame,
+			 d_len, true);
+
+	if (!channel) {
+		wil_err(wil, "Frame on unsupported channel\n");
+		return;
+	}
+
+	bss = cfg80211_inform_bss_frame(wiphy, channel, rx_mgmt_frame,
+					d_len, signal, GFP_KERNEL);
+	if (bss) {
+		wil_dbg_wmi(wil, "Added BSS %pM\n", rx_mgmt_frame->bssid);
+		cfg80211_put_bss(wiphy, bss);
+	} else {
+		wil_err(wil, "cfg80211_inform_bss_frame() failed\n");
+	}
+
+	cfg80211_sched_scan_results(wiphy, 0);
+}
+
 /**
  * Some events are ignored for purpose; and need not be interpreted as
  * "unhandled events"
@@ -1093,6 +1171,7 @@ static void wmi_evt_ignore(struct wil6210_priv *wil, int id, void *d, int len)
 	{WMI_DELBA_EVENTID,		wmi_evt_delba},
 	{WMI_VRING_EN_EVENTID,		wmi_evt_vring_en},
 	{WMI_DATA_PORT_OPEN_EVENTID,		wmi_evt_ignore},
+	{WMI_SCHED_SCAN_RESULT_EVENTID,		wmi_evt_sched_scan_result},
 };
 
 /*
@@ -2284,3 +2363,159 @@ bool wil_is_wmi_idle(struct wil6210_priv *wil)
 	spin_unlock_irqrestore(&wil->wmi_ev_lock, flags);
 	return rc;
 }
+
+static void
+wmi_sched_scan_set_ssids(struct wil6210_priv *wil,
+			 struct wmi_start_sched_scan_cmd *cmd,
+			 struct cfg80211_ssid *ssids, int n_ssids,
+			 struct cfg80211_match_set *match_sets,
+			 int n_match_sets)
+{
+	int i;
+
+	if (n_match_sets > WMI_MAX_PNO_SSID_NUM) {
+		wil_dbg_wmi(wil, "too many match sets (%d), use first %d\n",
+			    n_match_sets, WMI_MAX_PNO_SSID_NUM);
+		n_match_sets = WMI_MAX_PNO_SSID_NUM;
+	}
+	cmd->num_of_ssids = n_match_sets;
+
+	for (i = 0; i < n_match_sets; i++) {
+		struct wmi_sched_scan_ssid_match *wmi_match =
+			&cmd->ssid_for_match[i];
+		struct cfg80211_match_set *cfg_match = &match_sets[i];
+		int j;
+
+		wmi_match->ssid_len = cfg_match->ssid.ssid_len;
+		memcpy(wmi_match->ssid, cfg_match->ssid.ssid,
+		       min_t(u8, wmi_match->ssid_len, WMI_MAX_SSID_LEN));
+		wmi_match->rssi_threshold = S8_MIN;
+		if (cfg_match->rssi_thold >= S8_MIN &&
+		    cfg_match->rssi_thold <= S8_MAX)
+			wmi_match->rssi_threshold = cfg_match->rssi_thold;
+
+		for (j = 0; j < n_ssids; j++)
+			if (wmi_match->ssid_len == ssids[j].ssid_len &&
+			    memcmp(wmi_match->ssid, ssids[j].ssid,
+				   wmi_match->ssid_len) == 0)
+				wmi_match->add_ssid_to_probe = true;
+	}
+}
+
+static void
+wmi_sched_scan_set_channels(struct wil6210_priv *wil,
+			    struct wmi_start_sched_scan_cmd *cmd,
+			    u32 n_channels,
+			    struct ieee80211_channel **channels)
+{
+	int i;
+
+	if (n_channels > WMI_MAX_CHANNEL_NUM) {
+		wil_dbg_wmi(wil, "too many channels (%d), use first %d\n",
+			    n_channels, WMI_MAX_CHANNEL_NUM);
+		n_channels = WMI_MAX_CHANNEL_NUM;
+	}
+	cmd->num_of_channels = n_channels;
+
+	for (i = 0; i < n_channels; i++) {
+		struct ieee80211_channel *cfg_chan = channels[i];
+
+		cmd->channel_list[i] = cfg_chan->hw_value - 1;
+	}
+}
+
+static void
+wmi_sched_scan_set_plans(struct wil6210_priv *wil,
+			 struct wmi_start_sched_scan_cmd *cmd,
+			 struct cfg80211_sched_scan_plan *scan_plans,
+			 int n_scan_plans)
+{
+	int i;
+
+	if (n_scan_plans > WMI_MAX_PLANS_NUM) {
+		wil_dbg_wmi(wil, "too many plans (%d), use first %d\n",
+			    n_scan_plans, WMI_MAX_PLANS_NUM);
+		n_scan_plans = WMI_MAX_PLANS_NUM;
+	}
+
+	for (i = 0; i < n_scan_plans; i++) {
+		struct cfg80211_sched_scan_plan *cfg_plan = &scan_plans[i];
+
+		cmd->scan_plans[i].interval_sec =
+			cpu_to_le16(cfg_plan->interval);
+		cmd->scan_plans[i].num_of_iterations =
+			cpu_to_le16(cfg_plan->iterations);
+	}
+}
+
+int wmi_start_sched_scan(struct wil6210_priv *wil,
+			 struct cfg80211_sched_scan_request *request)
+{
+	int rc;
+	struct wmi_start_sched_scan_cmd cmd = {
+		.min_rssi_threshold = S8_MIN,
+		.initial_delay_sec = cpu_to_le16(request->delay),
+	};
+	struct {
+		struct wmi_cmd_hdr wmi;
+		struct wmi_start_sched_scan_event evt;
+	} __packed reply;
+
+	if (!test_bit(WMI_FW_CAPABILITY_PNO, wil->fw_capabilities))
+		return -ENOTSUPP;
+
+	if (request->min_rssi_thold >= S8_MIN &&
+	    request->min_rssi_thold <= S8_MAX)
+		cmd.min_rssi_threshold = request->min_rssi_thold;
+
+	wmi_sched_scan_set_ssids(wil, &cmd, request->ssids, request->n_ssids,
+				 request->match_sets, request->n_match_sets);
+	wmi_sched_scan_set_channels(wil, &cmd,
+				    request->n_channels, request->channels);
+	wmi_sched_scan_set_plans(wil, &cmd,
+				 request->scan_plans, request->n_scan_plans);
+
+	reply.evt.result = PNO_REJECT;
+
+	rc = wmi_call(wil, WMI_START_SCHED_SCAN_CMDID, &cmd, sizeof(cmd),
+		      WMI_START_SCHED_SCAN_EVENTID, &reply, sizeof(reply),
+		      WIL_WMI_CALL_GENERAL_TO_MS);
+	if (rc)
+		return rc;
+
+	if (reply.evt.result != PNO_SUCCESS) {
+		wil_err(wil, "start sched scan failed, result %d\n",
+			reply.evt.result);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int wmi_stop_sched_scan(struct wil6210_priv *wil)
+{
+	int rc;
+	struct {
+		struct wmi_cmd_hdr wmi;
+		struct wmi_stop_sched_scan_event evt;
+	} __packed reply;
+
+	if (!test_bit(WMI_FW_CAPABILITY_PNO, wil->fw_capabilities))
+		return -ENOTSUPP;
+
+	reply.evt.result = PNO_REJECT;
+
+	rc = wmi_call(wil, WMI_STOP_SCHED_SCAN_CMDID, NULL, 0,
+		      WMI_STOP_SCHED_SCAN_EVENTID, &reply, sizeof(reply),
+		      WIL_WMI_CALL_GENERAL_TO_MS);
+	if (rc)
+		return rc;
+
+	if (reply.evt.result != PNO_SUCCESS) {
+		wil_err(wil, "stop sched scan failed, result %d\n",
+			reply.evt.result);
+		return -EINVAL;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index d9e220a..7c6ac9c 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -71,6 +71,7 @@ enum wmi_fw_capability {
 	WMI_FW_CAPABILITY_RSSI_REPORTING		= 12,
 	WMI_FW_CAPABILITY_SET_SILENT_RSSI_TABLE		= 13,
 	WMI_FW_CAPABILITY_LO_POWER_CALIB_FROM_OTP	= 14,
+	WMI_FW_CAPABILITY_PNO				= 15,
 	WMI_FW_CAPABILITY_MAX,
 };
 
@@ -87,6 +88,8 @@ enum wmi_command_id {
 	WMI_CONNECT_CMDID				= 0x01,
 	WMI_DISCONNECT_CMDID				= 0x03,
 	WMI_DISCONNECT_STA_CMDID			= 0x04,
+	WMI_START_SCHED_SCAN_CMDID			= 0x05,
+	WMI_STOP_SCHED_SCAN_CMDID			= 0x06,
 	WMI_START_SCAN_CMDID				= 0x07,
 	WMI_SET_BSS_FILTER_CMDID			= 0x09,
 	WMI_SET_PROBED_SSID_CMDID			= 0x0A,
@@ -385,6 +388,38 @@ struct wmi_start_scan_cmd {
 	} channel_list[0];
 } __packed;
 
+#define WMI_MAX_PNO_SSID_NUM	(16)
+#define WMI_MAX_CHANNEL_NUM	(6)
+#define WMI_MAX_PLANS_NUM	(2)
+
+/* WMI_START_SCHED_SCAN_CMDID */
+struct wmi_sched_scan_ssid_match {
+	u8 ssid_len;
+	u8 ssid[WMI_MAX_SSID_LEN];
+	s8 rssi_threshold;
+	/* boolean */
+	u8 add_ssid_to_probe;
+	u8 reserved;
+} __packed;
+
+/* WMI_START_SCHED_SCAN_CMDID */
+struct wmi_sched_scan_plan {
+	__le16 interval_sec;
+	__le16 num_of_iterations;
+} __packed;
+
+/* WMI_START_SCHED_SCAN_CMDID */
+struct wmi_start_sched_scan_cmd {
+	struct wmi_sched_scan_ssid_match ssid_for_match[WMI_MAX_PNO_SSID_NUM];
+	u8 num_of_ssids;
+	s8 min_rssi_threshold;
+	u8 channel_list[WMI_MAX_CHANNEL_NUM];
+	u8 num_of_channels;
+	u8 reserved;
+	__le16 initial_delay_sec;
+	struct wmi_sched_scan_plan scan_plans[WMI_MAX_PLANS_NUM];
+} __packed;
+
 /* WMI_SET_PROBED_SSID_CMDID */
 #define MAX_PROBED_SSID_INDEX	(3)
 
@@ -1238,6 +1273,9 @@ enum wmi_event_id {
 	WMI_READY_EVENTID				= 0x1001,
 	WMI_CONNECT_EVENTID				= 0x1002,
 	WMI_DISCONNECT_EVENTID				= 0x1003,
+	WMI_START_SCHED_SCAN_EVENTID			= 0x1005,
+	WMI_STOP_SCHED_SCAN_EVENTID			= 0x1006,
+	WMI_SCHED_SCAN_RESULT_EVENTID			= 0x1007,
 	WMI_SCAN_COMPLETE_EVENTID			= 0x100A,
 	WMI_REPORT_STATISTICS_EVENTID			= 0x100B,
 	WMI_RD_MEM_RSP_EVENTID				= 0x1800,
@@ -1600,6 +1638,49 @@ struct wmi_scan_complete_event {
 	__le32 status;
 } __packed;
 
+/* wmi_rx_mgmt_info */
+struct wmi_rx_mgmt_info {
+	u8 mcs;
+	s8 rssi;
+	u8 range;
+	u8 sqi;
+	__le16 stype;
+	__le16 status;
+	__le32 len;
+	/* Not resolved when == 0xFFFFFFFF == > Broadcast to all MIDS */
+	u8 qid;
+	/* Not resolved when == 0xFFFFFFFF == > Broadcast to all MIDS */
+	u8 mid;
+	u8 cid;
+	/* From Radio MNGR */
+	u8 channel;
+} __packed;
+
+/* WMI_START_SCHED_SCAN_EVENTID */
+enum pno_result {
+	PNO_SUCCESS		= 0x00,
+	PNO_REJECT		= 0x01,
+	PNO_INVALID_PARAMETERS	= 0x02,
+	PNO_NOT_ENABLED		= 0x03,
+};
+
+struct wmi_start_sched_scan_event {
+	/* pno_result */
+	u8 result;
+	u8 reserved[3];
+} __packed;
+
+struct wmi_stop_sched_scan_event {
+	/* pno_result */
+	u8 result;
+	u8 reserved[3];
+} __packed;
+
+struct wmi_sched_scan_result_event {
+	struct wmi_rx_mgmt_info info;
+	u8 payload[0];
+} __packed;
+
 /* WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENT */
 enum wmi_acs_info_bitmask {
 	WMI_ACS_INFO_BITMASK_BEACON_FOUND	= 0x01,
@@ -1814,24 +1895,6 @@ struct wmi_get_ssid_event {
 	u8 ssid[WMI_MAX_SSID_LEN];
 } __packed;
 
-/* wmi_rx_mgmt_info */
-struct wmi_rx_mgmt_info {
-	u8 mcs;
-	s8 rssi;
-	u8 range;
-	u8 sqi;
-	__le16 stype;
-	__le16 status;
-	__le32 len;
-	/* Not resolved when == 0xFFFFFFFF == > Broadcast to all MIDS */
-	u8 qid;
-	/* Not resolved when == 0xFFFFFFFF == > Broadcast to all MIDS */
-	u8 mid;
-	u8 cid;
-	/* From Radio MNGR */
-	u8 channel;
-} __packed;
-
 /* EVENT: WMI_RF_XPM_READ_RESULT_EVENTID */
 struct wmi_rf_xpm_read_result_event {
 	/* enum wmi_fw_status_e - success=0 or fail=1 */
-- 
1.9.1

[PATCH 2/9] wil6210: support 40bit DMA addresses

[Maya Erez]

From: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>

Add the option to support 40bit addresses since some platforms
may not support 48bits but support 40bits

Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/pcie_bus.c | 26 +++++++++++++++-----------
 drivers/net/wireless/ath/wil6210/pmc.c      | 11 ++++++-----
 drivers/net/wireless/ath/wil6210/txrx.c     | 11 ++++++-----
 drivers/net/wireless/ath/wil6210/wil6210.h  |  2 +-
 4 files changed, 28 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 42a5480..d4bb0bd 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -206,6 +206,8 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		.fw_recovery = wil_platform_rop_fw_recovery,
 	};
 	u32 bar_size = pci_resource_len(pdev, 0);
+	int dma_addr_size[] = {48, 40, 32}; /* keep descending order */
+	int i;
 
 	/* check HW */
 	dev_info(&pdev->dev, WIL_NAME
@@ -241,21 +243,23 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 	/* rollback to err_plat */
 
-	/* device supports 48bit addresses */
-	rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
-	if (rc) {
-		dev_err(dev, "dma_set_mask_and_coherent(48) failed: %d\n", rc);
-		rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	/* device supports >32bit addresses */
+	for (i = 0; i < ARRAY_SIZE(dma_addr_size); i++) {
+		rc = dma_set_mask_and_coherent(dev,
+					       DMA_BIT_MASK(dma_addr_size[i]));
 		if (rc) {
-			dev_err(dev,
-				"dma_set_mask_and_coherent(32) failed: %d\n",
-				rc);
-			goto err_plat;
+			dev_err(dev, "dma_set_mask_and_coherent(%d) failed: %d\n",
+				dma_addr_size[i], rc);
+			continue;
 		}
-	} else {
-		wil->use_extended_dma_addr = 1;
+		dev_info(dev, "using dma mask %d", dma_addr_size[i]);
+		wil->dma_addr_size = dma_addr_size[i];
+		break;
 	}
 
+	if (wil->dma_addr_size == 0)
+		goto err_plat;
+
 	rc = pci_enable_device(pdev);
 	if (rc && pdev->msi_enabled == 0) {
 		wil_err(wil,
diff --git a/drivers/net/wireless/ath/wil6210/pmc.c b/drivers/net/wireless/ath/wil6210/pmc.c
index 2e301b6..4ea27b0 100644
--- a/drivers/net/wireless/ath/wil6210/pmc.c
+++ b/drivers/net/wireless/ath/wil6210/pmc.c
@@ -111,14 +111,14 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
 	 *
 	 * HW has limitation that all vrings addresses must share the same
 	 * upper 16 msb bits part of 48 bits address. To workaround that,
-	 * if we are using 48 bit addresses switch to 32 bit allocation
-	 * before allocating vring memory.
+	 * if we are using more than 32 bit addresses switch to 32 bit
+	 * allocation before allocating vring memory.
 	 *
 	 * There's no check for the return value of dma_set_mask_and_coherent,
 	 * since we assume if we were able to set the mask during
 	 * initialization in this system it will not fail if we set it again
 	 */
-	if (wil->use_extended_dma_addr)
+	if (wil->dma_addr_size > 32)
 		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 
 	pmc->pring_va = dma_alloc_coherent(dev,
@@ -126,8 +126,9 @@ void wil_pmc_alloc(struct wil6210_priv *wil,
 			&pmc->pring_pa,
 			GFP_KERNEL);
 
-	if (wil->use_extended_dma_addr)
-		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
+	if (wil->dma_addr_size > 32)
+		dma_set_mask_and_coherent(dev,
+					  DMA_BIT_MASK(wil->dma_addr_size));
 
 	wil_dbg_misc(wil,
 		     "pmc_alloc: allocated pring %p => %pad. %zd x %d = total %zd bytes\n",
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 389c718..62c04f0 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -178,14 +178,14 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring)
 	 *
 	 * HW has limitation that all vrings addresses must share the same
 	 * upper 16 msb bits part of 48 bits address. To workaround that,
-	 * if we are using 48 bit addresses switch to 32 bit allocation
-	 * before allocating vring memory.
+	 * if we are using more than 32 bit addresses switch to 32 bit
+	 * allocation before allocating vring memory.
 	 *
 	 * There's no check for the return value of dma_set_mask_and_coherent,
 	 * since we assume if we were able to set the mask during
 	 * initialization in this system it will not fail if we set it again
 	 */
-	if (wil->use_extended_dma_addr)
+	if (wil->dma_addr_size > 32)
 		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 
 	vring->va = dma_alloc_coherent(dev, sz, &vring->pa, GFP_KERNEL);
@@ -195,8 +195,9 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring)
 		return -ENOMEM;
 	}
 
-	if (wil->use_extended_dma_addr)
-		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
+	if (wil->dma_addr_size > 32)
+		dma_set_mask_and_coherent(dev,
+					  DMA_BIT_MASK(wil->dma_addr_size));
 
 	/* initially, all descriptors are SW owned
 	 * For Tx and Rx, ownership bit is at the same location, thus
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index aa85e9c..db68209 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -704,7 +704,7 @@ struct wil6210_priv {
 	struct wil_sta_info sta[WIL6210_MAX_CID];
 	int bcast_vring;
 	u32 vring_idle_trsh; /* HW fetches up to 16 descriptors at once  */
-	bool use_extended_dma_addr; /* indicates whether we are using 48 bits */
+	u32 dma_addr_size; /* indicates dma addr size */
 	/* scan */
 	struct cfg80211_scan_request *scan_request;
 
-- 
1.9.1

[PATCH 3/9] wil6210: add platform capabilities bitmap

[Maya Erez]

Add get_capa callback to platform ops to allow reading the platform
capabilities.
Supported capabilities:
- Keeping 11ad connection during suspend
- T_POWER_ON 0 support
- Usage of external clock

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/main.c         | 15 ++++++++++++---
 drivers/net/wireless/ath/wil6210/pcie_bus.c     | 10 ++++++++++
 drivers/net/wireless/ath/wil6210/wil6210.h      |  5 +++++
 drivers/net/wireless/ath/wil6210/wil_platform.h |  9 ++++++++-
 4 files changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 5d69796..bafd8d5 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -773,9 +773,8 @@ void wil_refresh_fw_capabilities(struct wil6210_priv *wil)
 	struct wiphy *wiphy = wil_to_wiphy(wil);
 
 	wil->keep_radio_on_during_sleep =
-		wil->platform_ops.keep_radio_on_during_sleep &&
-		wil->platform_ops.keep_radio_on_during_sleep(
-			wil->platform_handle) &&
+		test_bit(WIL_PLATFORM_CAPA_RADIO_ON_IN_SUSPEND,
+			 wil->platform_capa) &&
 		test_bit(WMI_FW_CAPABILITY_D3_SUSPEND, wil->fw_capabilities);
 
 	wil_info(wil, "keep_radio_on_during_sleep (%d)\n",
@@ -1008,6 +1007,16 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	if (wil->hw_version == HW_VER_UNKNOWN)
 		return -ENODEV;
 
+	if (test_bit(WIL_PLATFORM_CAPA_T_PWR_ON_0, wil->platform_capa)) {
+		wil_dbg_misc(wil, "Notify FW to set T_POWER_ON=0\n");
+		wil_s(wil, RGF_USER_USAGE_8, BIT_USER_SUPPORT_T_POWER_ON_0);
+	}
+
+	if (test_bit(WIL_PLATFORM_CAPA_EXT_CLK, wil->platform_capa)) {
+		wil_dbg_misc(wil, "Notify FW on ext clock configuration\n");
+		wil_s(wil, RGF_USER_USAGE_8, BIT_USER_EXT_CLK);
+	}
+
 	if (wil->platform_ops.notify) {
 		rc = wil->platform_ops.notify(wil->platform_handle,
 					      WIL_PLATFORM_EVT_PRE_RESET);
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index d4bb0bd..dc84001 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -43,9 +43,11 @@ void wil_set_capabilities(struct wil6210_priv *wil)
 	u32 jtag_id = wil_r(wil, RGF_USER_JTAG_DEV_ID);
 	u8 chip_revision = (wil_r(wil, RGF_USER_REVISION_ID) &
 			    RGF_USER_REVISION_ID_MASK);
+	int platform_capa;
 
 	bitmap_zero(wil->hw_capabilities, hw_capability_last);
 	bitmap_zero(wil->fw_capabilities, WMI_FW_CAPABILITY_MAX);
+	bitmap_zero(wil->platform_capa, WIL_PLATFORM_CAPA_MAX);
 	wil->wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_DEFAULT :
 			   WIL_FW_NAME_DEFAULT;
 	wil->chip_revision = chip_revision;
@@ -81,6 +83,14 @@ void wil_set_capabilities(struct wil6210_priv *wil)
 
 	wil_info(wil, "Board hardware is %s\n", wil->hw_name);
 
+	/* Get platform capabilities */
+	if (wil->platform_ops.get_capa) {
+		platform_capa =
+			wil->platform_ops.get_capa(wil->platform_handle);
+		memcpy(wil->platform_capa, &platform_capa,
+		       min(sizeof(wil->platform_capa), sizeof(platform_capa)));
+	}
+
 	/* extract FW capabilities from file without loading the FW */
 	wil_request_firmware(wil, wil->wil_fw_name, false);
 	wil_refresh_fw_capabilities(wil);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index db68209..f2bb55e 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -161,6 +161,10 @@ struct RGF_ICR {
 #define RGF_USER_USAGE_6		(0x880018)
 	#define BIT_USER_OOB_MODE		BIT(31)
 	#define BIT_USER_OOB_R2_MODE		BIT(30)
+#define RGF_USER_USAGE_8		(0x880020)
+	#define BIT_USER_PREVENT_DEEP_SLEEP	BIT(0)
+	#define BIT_USER_SUPPORT_T_POWER_ON_0	BIT(1)
+	#define BIT_USER_EXT_CLK		BIT(2)
 #define RGF_USER_HW_MACHINE_STATE	(0x8801dc)
 	#define HW_MACHINE_BOOT_DONE	(0x3fffffd)
 #define RGF_USER_USER_CPU_0		(0x8801e0)
@@ -643,6 +647,7 @@ struct wil6210_priv {
 	const char *wil_fw_name;
 	DECLARE_BITMAP(hw_capabilities, hw_capability_last);
 	DECLARE_BITMAP(fw_capabilities, WMI_FW_CAPABILITY_MAX);
+	DECLARE_BITMAP(platform_capa, WIL_PLATFORM_CAPA_MAX);
 	u8 n_mids; /* number of additional MIDs as reported by FW */
 	u32 recovery_count; /* num of FW recovery attempts in a short time */
 	u32 recovery_state; /* FW recovery state machine */
diff --git a/drivers/net/wireless/ath/wil6210/wil_platform.h b/drivers/net/wireless/ath/wil6210/wil_platform.h
index 5d9e4bf..5cfb946 100644
--- a/drivers/net/wireless/ath/wil6210/wil_platform.h
+++ b/drivers/net/wireless/ath/wil6210/wil_platform.h
@@ -27,6 +27,13 @@ enum wil_platform_event {
 	WIL_PLATFORM_EVT_POST_SUSPEND = 4,
 };
 
+enum wil_platform_capa {
+	WIL_PLATFORM_CAPA_RADIO_ON_IN_SUSPEND = 0,
+	WIL_PLATFORM_CAPA_T_PWR_ON_0 = 1,
+	WIL_PLATFORM_CAPA_EXT_CLK = 2,
+	WIL_PLATFORM_CAPA_MAX,
+};
+
 /**
  * struct wil_platform_ops - wil platform module calls from this
  * driver to platform driver
@@ -37,7 +44,7 @@ struct wil_platform_ops {
 	int (*resume)(void *handle, bool device_powered_on);
 	void (*uninit)(void *handle);
 	int (*notify)(void *handle, enum wil_platform_event evt);
-	bool (*keep_radio_on_during_sleep)(void *handle);
+	int (*get_capa)(void *handle);
 };
 
 /**
-- 
1.9.1

[PATCH 4/9] wil6210: set platform features based on FW capabilities

[Maya Erez]

In some cases the platform should be aware of the FW capabilities
to decide which feature to enable.
For example, FW can control the external REF clock for power saving.
Driver should notify the platform about that, to allow platform
power management optimization.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/main.c         | 11 +++++++++++
 drivers/net/wireless/ath/wil6210/wil_platform.h |  6 ++++++
 drivers/net/wireless/ath/wil6210/wmi.h          |  1 +
 3 files changed, 18 insertions(+)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index bafd8d5..7a8f8c2 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -771,6 +771,7 @@ static void wil_collect_fw_info(struct wil6210_priv *wil)
 void wil_refresh_fw_capabilities(struct wil6210_priv *wil)
 {
 	struct wiphy *wiphy = wil_to_wiphy(wil);
+	int features;
 
 	wil->keep_radio_on_during_sleep =
 		test_bit(WIL_PLATFORM_CAPA_RADIO_ON_IN_SUSPEND,
@@ -792,6 +793,16 @@ void wil_refresh_fw_capabilities(struct wil6210_priv *wil)
 		wiphy->max_sched_scan_ie_len = WMI_MAX_IE_LEN;
 		wiphy->max_sched_scan_plans = WMI_MAX_PLANS_NUM;
 	}
+
+	if (wil->platform_ops.set_features) {
+		features = (test_bit(WMI_FW_CAPABILITY_REF_CLOCK_CONTROL,
+				     wil->fw_capabilities) &&
+			    test_bit(WIL_PLATFORM_CAPA_EXT_CLK,
+				     wil->platform_capa)) ?
+			BIT(WIL_PLATFORM_FEATURE_FW_EXT_CLK_CONTROL) : 0;
+
+		wil->platform_ops.set_features(wil->platform_handle, features);
+	}
 }
 
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
diff --git a/drivers/net/wireless/ath/wil6210/wil_platform.h b/drivers/net/wireless/ath/wil6210/wil_platform.h
index 5cfb946..177026e 100644
--- a/drivers/net/wireless/ath/wil6210/wil_platform.h
+++ b/drivers/net/wireless/ath/wil6210/wil_platform.h
@@ -27,6 +27,11 @@ enum wil_platform_event {
 	WIL_PLATFORM_EVT_POST_SUSPEND = 4,
 };
 
+enum wil_platform_features {
+	WIL_PLATFORM_FEATURE_FW_EXT_CLK_CONTROL = 0,
+	WIL_PLATFORM_FEATURE_MAX,
+};
+
 enum wil_platform_capa {
 	WIL_PLATFORM_CAPA_RADIO_ON_IN_SUSPEND = 0,
 	WIL_PLATFORM_CAPA_T_PWR_ON_0 = 1,
@@ -45,6 +50,7 @@ struct wil_platform_ops {
 	void (*uninit)(void *handle);
 	int (*notify)(void *handle, enum wil_platform_event evt);
 	int (*get_capa)(void *handle);
+	void (*set_features)(void *handle, int features);
 };
 
 /**
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 7c6ac9c..adb317f 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -72,6 +72,7 @@ enum wmi_fw_capability {
 	WMI_FW_CAPABILITY_SET_SILENT_RSSI_TABLE		= 13,
 	WMI_FW_CAPABILITY_LO_POWER_CALIB_FROM_OTP	= 14,
 	WMI_FW_CAPABILITY_PNO				= 15,
+	WMI_FW_CAPABILITY_REF_CLOCK_CONTROL		= 18,
 	WMI_FW_CAPABILITY_MAX,
 };
 
-- 
1.9.1

[PATCH 5/9] wil6210: prevent parallel suspend and dump collection

[Maya Erez]

Suspend and crash dump operations can happen simultaneously
in case there is a FW assert during the suspend procedure
or when SSR calls all the devices crashdump callbacks.

To prevent that, a new flag is added, indicating that the
dumps collection is in progress, in order to allow the
suspend/reset decline if the dumps collection already started.

Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/main.c           | 33 +++++++++++++++++------
 drivers/net/wireless/ath/wil6210/pm.c             | 17 ++++++++++++
 drivers/net/wireless/ath/wil6210/wil6210.h        |  1 +
 drivers/net/wireless/ath/wil6210/wil_crash_dump.c | 11 ++++++++
 4 files changed, 54 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 7a8f8c2..aa6f9c4 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -998,6 +998,7 @@ static void wil_pre_fw_config(struct wil6210_priv *wil)
 int wil_reset(struct wil6210_priv *wil, bool load_fw)
 {
 	int rc;
+	unsigned long status_flags = BIT(wil_status_resetting);
 
 	wil_dbg_misc(wil, "reset\n");
 
@@ -1037,6 +1038,14 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	}
 
 	set_bit(wil_status_resetting, wil->status);
+	if (test_bit(wil_status_collecting_dumps, wil->status)) {
+		/* Device collects crash dump, cancel the reset.
+		 * following crash dump collection, reset would take place.
+		 */
+		wil_dbg_misc(wil, "reject reset while collecting crash dump\n");
+		rc = -EBUSY;
+		goto out;
+	}
 
 	cancel_work_sync(&wil->disconnect_worker);
 	wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false);
@@ -1051,7 +1060,11 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 
 	/* prevent NAPI from being scheduled and prevent wmi commands */
 	mutex_lock(&wil->wmi_mutex);
-	bitmap_zero(wil->status, wil_status_last);
+	if (test_bit(wil_status_suspending, wil->status))
+		status_flags |= BIT(wil_status_suspending);
+	bitmap_and(wil->status, wil->status, &status_flags,
+		   wil_status_last);
+	wil_dbg_misc(wil, "wil->status (0x%lx)\n", *wil->status);
 	mutex_unlock(&wil->wmi_mutex);
 
 	wil_mask_irq(wil);
@@ -1069,14 +1082,14 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	wil_rx_fini(wil);
 	if (rc) {
 		wil_bl_crash_info(wil, true);
-		return rc;
+		goto out;
 	}
 
 	rc = wil_get_bl_info(wil);
 	if (rc == -EAGAIN && !load_fw) /* ignore RF error if not going up */
 		rc = 0;
 	if (rc)
-		return rc;
+		goto out;
 
 	wil_set_oob_mode(wil, oob_mode);
 	if (load_fw) {
@@ -1088,10 +1101,10 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 		/* Loading f/w from the file */
 		rc = wil_request_firmware(wil, wil->wil_fw_name, true);
 		if (rc)
-			return rc;
+			goto out;
 		rc = wil_request_firmware(wil, WIL_BOARD_FILE_NAME, true);
 		if (rc)
-			return rc;
+			goto out;
 
 		wil_pre_fw_config(wil);
 		wil_release_cpu(wil);
@@ -1103,6 +1116,8 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	reinit_completion(&wil->wmi_call);
 	reinit_completion(&wil->halp.comp);
 
+	clear_bit(wil_status_resetting, wil->status);
+
 	if (load_fw) {
 		wil_configure_interrupt_moderation(wil);
 		wil_unmask_irq(wil);
@@ -1136,6 +1151,10 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	}
 
 	return rc;
+
+out:
+	clear_bit(wil_status_resetting, wil->status);
+	return rc;
 }
 
 void wil_fw_error_recovery(struct wil6210_priv *wil)
@@ -1241,9 +1260,7 @@ int __wil_down(struct wil6210_priv *wil)
 	wil_abort_scan(wil, false);
 	mutex_unlock(&wil->p2p_wdev_mutex);
 
-	wil_reset(wil, false);
-
-	return 0;
+	return wil_reset(wil, false);
 }
 
 int wil_down(struct wil6210_priv *wil)
diff --git a/drivers/net/wireless/ath/wil6210/pm.c b/drivers/net/wireless/ath/wil6210/pm.c
index 056b180..0a96518 100644
--- a/drivers/net/wireless/ath/wil6210/pm.c
+++ b/drivers/net/wireless/ath/wil6210/pm.c
@@ -145,6 +145,13 @@ static int wil_suspend_keep_radio_on(struct wil6210_priv *wil)
 
 	/* Prevent handling of new tx and wmi commands */
 	set_bit(wil_status_suspending, wil->status);
+	if (test_bit(wil_status_collecting_dumps, wil->status)) {
+		/* Device collects crash dump, cancel the suspend */
+		wil_dbg_pm(wil, "reject suspend while collecting crash dump\n");
+		clear_bit(wil_status_suspending, wil->status);
+		wil->suspend_stats.rejected_by_host++;
+		return -EBUSY;
+	}
 	wil_update_net_queues_bh(wil, NULL, true);
 
 	if (!wil_is_tx_idle(wil)) {
@@ -255,6 +262,15 @@ static int wil_suspend_radio_off(struct wil6210_priv *wil)
 
 	wil_dbg_pm(wil, "suspend radio off\n");
 
+	set_bit(wil_status_suspending, wil->status);
+	if (test_bit(wil_status_collecting_dumps, wil->status)) {
+		/* Device collects crash dump, cancel the suspend */
+		wil_dbg_pm(wil, "reject suspend while collecting crash dump\n");
+		clear_bit(wil_status_suspending, wil->status);
+		wil->suspend_stats.rejected_by_host++;
+		return -EBUSY;
+	}
+
 	/* if netif up, hardware is alive, shut it down */
 	if (ndev->flags & IFF_UP) {
 		rc = wil_down(wil);
@@ -281,6 +297,7 @@ static int wil_suspend_radio_off(struct wil6210_priv *wil)
 	set_bit(wil_status_suspended, wil->status);
 
 out:
+	clear_bit(wil_status_suspending, wil->status);
 	wil_dbg_pm(wil, "suspend radio off: %d\n", rc);
 
 	return rc;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index f2bb55e..ca5abbd 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -445,6 +445,7 @@ enum { /* for wil6210_priv.status */
 	wil_status_suspending, /* suspend in progress */
 	wil_status_suspended, /* suspend completed, device is suspended */
 	wil_status_resuming, /* resume in progress */
+	wil_status_collecting_dumps, /* crashdump collection in progress */
 	wil_status_last /* keep last */
 };
 
diff --git a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
index e53cf0c..1ed3306 100644
--- a/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
+++ b/drivers/net/wireless/ath/wil6210/wil_crash_dump.c
@@ -72,6 +72,15 @@ int wil_fw_copy_crash_dump(struct wil6210_priv *wil, void *dest, u32 size)
 		return -EINVAL;
 	}
 
+	set_bit(wil_status_collecting_dumps, wil->status);
+	if (test_bit(wil_status_suspending, wil->status) ||
+	    test_bit(wil_status_suspended, wil->status) ||
+	    test_bit(wil_status_resetting, wil->status)) {
+		wil_err(wil, "cannot collect fw dump during suspend/reset\n");
+		clear_bit(wil_status_collecting_dumps, wil->status);
+		return -EINVAL;
+	}
+
 	/* copy to crash dump area */
 	for (i = 0; i < ARRAY_SIZE(fw_mapping); i++) {
 		map = &fw_mapping[i];
@@ -91,6 +100,8 @@ int wil_fw_copy_crash_dump(struct wil6210_priv *wil, void *dest, u32 size)
 				     (const void __iomem * __force)data, len);
 	}
 
+	clear_bit(wil_status_collecting_dumps, wil->status);
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH 6/9] wil6210: add support for headroom configuration

[Maya Erez]

From: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>

Add module parameter for configuring the headroom size
in the skb allocation.

Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 62c04f0..89967ce 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -41,6 +41,32 @@
 module_param(rx_large_buf, bool, 0444);
 MODULE_PARM_DESC(rx_large_buf, " allocate 8KB RX buffers, default - no");
 
+#define WIL6210_MAX_HEADROOM_SIZE	(256)
+
+static ushort headroom_size; /* = 0; */
+static int headroom_size_set(const char *val, const struct kernel_param *kp)
+{
+	int ret;
+
+	ret = param_set_uint(val, kp);
+	if (ret)
+		return ret;
+
+	if (headroom_size > WIL6210_MAX_HEADROOM_SIZE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct kernel_param_ops headroom_ops = {
+	.set = headroom_size_set,
+	.get = param_get_ushort,
+};
+
+module_param_cb(headroom_size, &headroom_ops, &headroom_size, 0644);
+MODULE_PARM_DESC(headroom_size,
+		 " headroom size for rx skb allocation, default - 0");
+
 static inline uint wil_rx_snaplen(void)
 {
 	return rx_align_2 ? 6 : 0;
@@ -630,7 +656,7 @@ static int wil_rx_refill(struct wil6210_priv *wil, int count)
 	u32 next_tail;
 	int rc = 0;
 	int headroom = ndev->type == ARPHRD_IEEE80211_RADIOTAP ?
-			WIL6210_RTAP_SIZE : 0;
+			WIL6210_RTAP_SIZE : headroom_size;
 
 	for (; next_tail = wil_vring_next_tail(v),
 			(next_tail != v->swhead) && (count-- > 0);
-- 
1.9.1

[PATCH 7/9] wil6210: configurable broadcast TX MCS

[Maya Erez]

From: Lior David <qca_liord@qca.qualcomm.com>

Add 2 module parameters that control broadcast/multicast
TX packets:
1. bcast_mcs0_limit - specify the maximum packet size
that will be sent with MCS 0.
2. bcast_mcs - specify the MCS index to use when sending
packets larger than above limit.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 59 +++++++++++++++++++++++++++++++--
 1 file changed, 57 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 89967ce..4fc05f7 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -67,6 +67,60 @@ static int headroom_size_set(const char *val, const struct kernel_param *kp)
 MODULE_PARM_DESC(headroom_size,
 		 " headroom size for rx skb allocation, default - 0");
 
+static uint bcast_mcs0_limit = WIL_BCAST_MCS0_LIMIT;
+static int bcast_mcs0_limit_set(const char *val, const struct kernel_param *kp)
+{
+	int ret;
+	uint saved = bcast_mcs0_limit;
+
+	ret = param_set_uint(val, kp);
+	if (ret)
+		return ret;
+
+	if (bcast_mcs0_limit > WIL_BCAST_MCS0_LIMIT) {
+		bcast_mcs0_limit = saved;
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct kernel_param_ops bcast_mcs0_limit_ops = {
+	.set = bcast_mcs0_limit_set,
+	.get = param_get_uint,
+};
+
+module_param_cb(bcast_mcs0_limit_set, &bcast_mcs0_limit_ops,
+		&bcast_mcs0_limit, 0644);
+MODULE_PARM_DESC(bcast_mcs0_limit,
+		 " max broadcast packet size with MCS0, default - 1024 bytes");
+
+static uint bcast_mcs = 1;
+static int bcast_mcs_set(const char *val, const struct kernel_param *kp)
+{
+	int ret;
+	uint saved = bcast_mcs;
+
+	ret = param_set_uint(val, kp);
+	if (ret)
+		return ret;
+
+	if (bcast_mcs > WIL_MCS_MAX || bcast_mcs == 0) {
+		bcast_mcs = saved;
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct kernel_param_ops bcast_mcs_ops = {
+	.set = bcast_mcs_set,
+	.get = param_get_uint,
+};
+
+module_param_cb(bcast_mcs, &bcast_mcs_ops, &bcast_mcs, 0644);
+MODULE_PARM_DESC(bcast_mcs, " MCS index for large bcast TX, default - 1");
+
 static inline uint wil_rx_snaplen(void)
 {
 	return rx_align_2 ? 6 : 0;
@@ -1783,8 +1837,9 @@ static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 	wil_tx_desc_map(d, pa, len, vring_index);
 	if (unlikely(mcast)) {
 		d->mac.d[0] |= BIT(MAC_CFG_DESC_TX_0_MCS_EN_POS); /* MCS 0 */
-		if (unlikely(len > WIL_BCAST_MCS0_LIMIT)) /* set MCS 1 */
-			d->mac.d[0] |= (1 << MAC_CFG_DESC_TX_0_MCS_INDEX_POS);
+		if (unlikely(len > bcast_mcs0_limit)) /* use bcast_mcs */
+			d->mac.d[0] |= (bcast_mcs <<
+					MAC_CFG_DESC_TX_0_MCS_INDEX_POS);
 	}
 	/* Process TCP/UDP checksum offloading */
 	if (unlikely(wil_tx_desc_offload_setup(d, skb))) {
-- 
1.9.1

[PATCH 8/9] wil6210: remove leftover "FIXME"s

[Maya Erez]

From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>

"FIXME: IRQ mask debug" and "FIXME: interrupts enabled - for debug"
can be removed because wil6210_debug_irq_mask() is now considered
production feature.

"FIXME FW can transmit only ucast frames to peer" and "FIXME real
ring_id instead of hard coded 0" can be removed because FW/HW already
support multicast transmission.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 2 +-
 drivers/net/wireless/ath/wil6210/wil6210.h   | 2 +-
 drivers/net/wireless/ath/wil6210/wmi.c       | 2 --
 3 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 5cf3417..dcf87a7 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -565,7 +565,7 @@ static irqreturn_t wil6210_hardirq(int irq, void *cookie)
 	if (unlikely((pseudo_cause == 0) || ((pseudo_cause & 0xff) == 0xff)))
 		return IRQ_NONE;
 
-	/* FIXME: IRQ mask debug */
+	/* IRQ mask debug */
 	if (unlikely(wil6210_debug_irq_mask(wil, pseudo_cause)))
 		return IRQ_NONE;
 
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index ca5abbd..703e09e 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -439,7 +439,7 @@ enum { /* for wil6210_priv.status */
 	wil_status_fwconnected,
 	wil_status_dontscan,
 	wil_status_mbox_ready, /* MBOX structures ready */
-	wil_status_irqen, /* FIXME: interrupts enabled - for debug */
+	wil_status_irqen, /* interrupts enabled - for debug */
 	wil_status_napi_en, /* NAPI enabled protected by wil->mutex */
 	wil_status_resetting, /* reset in progress */
 	wil_status_suspending, /* suspend in progress */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index ed7cdb7..4d7fb47 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -811,8 +811,6 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
 		}
 	}
 
-	/* FIXME FW can transmit only ucast frames to peer */
-	/* FIXME real ring_id instead of hard coded 0 */
 	ether_addr_copy(wil->sta[evt->cid].addr, evt->bssid);
 	wil->sta[evt->cid].status = wil_sta_conn_pending;
 
-- 
1.9.1

[PATCH 9/9] wil6210: remove reference to preset_chandef

[Maya Erez]

From: Lior David <qca_liord@qca.qualcomm.com>

The field preset_chandef of wireless_dev must not be accessed
by the driver because it is private to cfg80211. Store the
monitor channel locally in wil6210_priv instead.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 3 +--
 drivers/net/wireless/ath/wil6210/debugfs.c  | 1 -
 drivers/net/wireless/ath/wil6210/netdev.c   | 2 +-
 drivers/net/wireless/ath/wil6210/txrx.c     | 3 +--
 drivers/net/wireless/ath/wil6210/wil6210.h  | 1 +
 drivers/net/wireless/ath/wil6210/wmi.c      | 2 +-
 6 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 39509d0..768f63f38 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -956,9 +956,8 @@ static int wil_cfg80211_set_channel(struct wiphy *wiphy,
 				    struct cfg80211_chan_def *chandef)
 {
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
-	struct wireless_dev *wdev = wil_to_wdev(wil);
 
-	wdev->preset_chandef = *chandef;
+	wil->monitor_chandef = *chandef;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 4475937..4a48882 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -869,7 +869,6 @@ static ssize_t wil_write_file_txmgmt(struct file *file, const char __user *buf,
 
 	params.buf = frame;
 	params.len = len;
-	params.chan = wdev->preset_chandef.chan;
 
 	rc = wil_cfg80211_mgmt_tx(wiphy, wdev, &params, NULL);
 
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index b641ac1..7ba4e0a 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -150,7 +150,7 @@ void *wil_if_alloc(struct device *dev)
 	wdev->iftype = NL80211_IFTYPE_STATION; /* TODO */
 	/* default monitor channel */
 	ch = wdev->wiphy->bands[NL80211_BAND_60GHZ]->channels;
-	cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
+	cfg80211_chandef_create(&wil->monitor_chandef, ch, NL80211_CHAN_NO_HT);
 
 	ndev = alloc_netdev(0, "wlan%d", NET_NAME_UNKNOWN, wil_dev_setup);
 	if (!ndev) {
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 4fc05f7..9f8c6087f 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -428,7 +428,6 @@ static int wil_vring_alloc_skb(struct wil6210_priv *wil, struct vring *vring,
 static void wil_rx_add_radiotap_header(struct wil6210_priv *wil,
 				       struct sk_buff *skb)
 {
-	struct wireless_dev *wdev = wil->wdev;
 	struct wil6210_rtap {
 		struct ieee80211_radiotap_header rthdr;
 		/* fields should be in the order of bits in rthdr.it_present */
@@ -455,7 +454,7 @@ static void wil_rx_add_radiotap_header(struct wil6210_priv *wil,
 	int rtap_len = sizeof(struct wil6210_rtap);
 	int phy_length = 0; /* phy info header size, bytes */
 	static char phy_data[128];
-	struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+	struct ieee80211_channel *ch = wil->monitor_chandef.chan;
 
 	if (rtap_include_phy_info) {
 		rtap_len = sizeof(*rtap_vendor) + sizeof(*d);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 703e09e..1131893 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -655,6 +655,7 @@ struct wil6210_priv {
 	unsigned long last_fw_recovery; /* jiffies of last fw recovery */
 	wait_queue_head_t wq; /* for all wait_event() use */
 	/* profile */
+	struct cfg80211_chan_def monitor_chandef;
 	u32 monitor_flags;
 	u32 privacy; /* secure connection? */
 	u8 hidden_ssid; /* relevant in AP mode */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 4d7fb47..bee018d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1780,7 +1780,7 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring)
 	int rc;
 
 	if (wdev->iftype == NL80211_IFTYPE_MONITOR) {
-		struct ieee80211_channel *ch = wdev->preset_chandef.chan;
+		struct ieee80211_channel *ch = wil->monitor_chandef.chan;
 
 		cmd.sniffer_cfg.mode = cpu_to_le32(WMI_SNIFFER_ON);
 		if (ch)
-- 
1.9.1

Re: [PATCH 1/9] wil6210: support Scheduled scan

[Arend van Spriel]

On 12/12/2017 8:03 PM, Maya Erez wrote:
> From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
>
> Add support for sched_scan_start/stop by sending PNO commands to FW.
> Driver reports WIPHY_FLAG_SUPPORTS_SCHED_SCAN and invokes
> cfg80211_sched_scan_results upon receiving
> WMI_SCHED_SCAN_RESULT_EVENTID from FW.

The commit message triggered me as the wiphy flag mentioned no longer 
exists. Looking further into the patch it looks fine to me, but the flag 
needs to be removed from the commit message.

> Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
> ---
>   drivers/net/wireless/ath/wil6210/cfg80211.c |  65 ++++++++
>   drivers/net/wireless/ath/wil6210/main.c     |   8 +
>   drivers/net/wireless/ath/wil6210/wil6210.h  |   4 +
>   drivers/net/wireless/ath/wil6210/wmi.c      | 239 +++++++++++++++++++++++++++-
>   drivers/net/wireless/ath/wil6210/wmi.h      |  99 +++++++++---
>   5 files changed, 395 insertions(+), 20 deletions(-)

[...]

> diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
> index 8ace618..ed7cdb7 100644
> --- a/drivers/net/wireless/ath/wil6210/wmi.c
> +++ b/drivers/net/wireless/ath/wil6210/wmi.c

[...]

> @@ -658,8 +669,6 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len)
>   		wil_hex_dump_wmi("IE ", DUMP_PREFIX_OFFSET, 16, 1, ie_buf,
>   				 ie_len, true);
>
> -		wil_dbg_wmi(wil, "Capability info : 0x%04x\n", cap);
> -

This does not seem related.

>   		bss = cfg80211_inform_bss_frame(wiphy, channel, rx_mgmt_frame,
>   						d_len, signal, GFP_KERNEL);
>   		if (bss) {

[...]

> diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
> index d9e220a..7c6ac9c 100644
> --- a/drivers/net/wireless/ath/wil6210/wmi.h
> +++ b/drivers/net/wireless/ath/wil6210/wmi.h

[...]

> +/* WMI_START_SCHED_SCAN_EVENTID */
> +enum pno_result {
> +	PNO_SUCCESS		= 0x00,
> +	PNO_REJECT		= 0x01,
> +	PNO_INVALID_PARAMETERS	= 0x02,
> +	PNO_NOT_ENABLED		= 0x03,
> +};

Maybe good to stick with 'wmi_' for types defined in this file, ie. 
wmi_pno_result. Preferably also the enum values, but throughout the file 
I see instances with 'WMI_' prefix and without.

> +
> +struct wmi_start_sched_scan_event {
> +	/* pno_result */
> +	u8 result;
> +	u8 reserved[3];
> +} __packed;
> +
> +struct wmi_stop_sched_scan_event {
> +	/* pno_result */
> +	u8 result;
> +	u8 reserved[3];
> +} __packed;

Regards,
Arend