[PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[Lipeng]

This patchset adds some new feature support and fixes some bugs:
[Patch 1/17 - 5/17] add the support to modify/query the tqp number
through ethtool -L/l command, and also fix some related bugs for
change tqp number.
[Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
for pf, and fix some related bugs.
[patch 10/17 - 11/17] fix bugs for auto negotiation.
[patch 12/17] adds support for ethtool command set_pauseparam.
[patch 13/17 - 14/17] add support to update flow control settings after
autoneg.
[patch 15/17 - 17/17] fix some other bugs in net-next.

---
Change Log:
V2 -> V3:
1, order local variables requested by David Miller.
2, use "int" for index iteration loops requested by David Miller.

V1 -> V2:
1, fix the comments from Sergei Shtylyov.
---

Fuyun Liang (3):
  net: hns3: cleanup mac auto-negotiation state query
  net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg
  net: hns3: add Asym Pause support to phy default features

Lipeng (13):
  net: hns3: add support to query tqps number
  net: hns3: add support to modify tqps number
  net: hns3: change the returned tqp number by ethtool -x
  net: hns3: Free the ring_data structrue when change tqps
  net: hns3: Add a mask initialization for mac_vlan table
  net: hns3: Add vlan offload config command
  net: hns3: Add ethtool related offload command
  net: hns3: Add handling vlan tag offload in bd
  net: hns3: add support for set_pauseparam
  net: hns3: add support to update flow control settings after autoneg
  net: hns3: add support for querying advertised pause frame by ethtool
    ethx
  net: hns3: Increase the default depth of bucket for TM shaper
  net: hns3: change TM sched mode to TC-based mode when SRIOV enabled

qumingguang (1):
  net: hns3: Get rss_size_max from configuration but not hardcode

 drivers/net/ethernet/hisilicon/hns3/hnae3.h        |  10 +
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    | 225 ++++++++-
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h    |   2 +
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |  41 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h |  57 +++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 514 +++++++++++++++++++--
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |  38 ++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c    |   5 +
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c  |   6 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h  |   1 +
 10 files changed, 855 insertions(+), 44 deletions(-)

-- 
1.9.1

[PATCH V3 net-next 01/17] net: hns3: add support to query tqps number

[Lipeng]

This patch adds the support to query tqps number for PF driver
by using ehtool -l command.

Signed-off-by: qumingguang <qumingguang@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h         |  2 ++
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c  | 10 ++++++++++
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 21 +++++++++++++++++++++
 3 files changed, 33 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index a9e2b32..d887721 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -386,6 +386,8 @@ struct hnae3_ae_ops {
 				  u16 vlan, u8 qos, __be16 proto);
 	void (*reset_event)(struct hnae3_handle *handle,
 			    enum hnae3_reset_type reset);
+	void (*get_channels)(struct hnae3_handle *handle,
+			     struct ethtool_channels *ch);
 };
 
 struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 65a69b4..23af36c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -849,6 +849,15 @@ static int hns3_nway_reset(struct net_device *netdev)
 	return genphy_restart_aneg(phy);
 }
 
+void hns3_get_channels(struct net_device *netdev,
+		       struct ethtool_channels *ch)
+{
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+
+	if (h->ae_algo->ops->get_channels)
+		h->ae_algo->ops->get_channels(h, ch);
+}
+
 static const struct ethtool_ops hns3vf_ethtool_ops = {
 	.get_drvinfo = hns3_get_drvinfo,
 	.get_ringparam = hns3_get_ringparam,
@@ -883,6 +892,7 @@ static int hns3_nway_reset(struct net_device *netdev)
 	.get_link_ksettings = hns3_get_link_ksettings,
 	.set_link_ksettings = hns3_set_link_ksettings,
 	.nway_reset = hns3_nway_reset,
+	.get_channels = hns3_get_channels,
 };
 
 void hns3_ethtool_set_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index e97fd66..a3101bc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5002,6 +5002,26 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
 	ae_dev->priv = NULL;
 }
 
+static u32 hclge_get_max_channels(struct hnae3_handle *handle)
+{
+	struct hnae3_knic_private_info *kinfo = &handle->kinfo;
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+
+	return min_t(u32, hdev->rss_size_max * kinfo->num_tc, hdev->num_tqps);
+}
+
+static void hclge_get_channels(struct hnae3_handle *handle,
+			       struct ethtool_channels *ch)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+
+	ch->max_combined = hclge_get_max_channels(handle);
+	ch->other_count = 1;
+	ch->max_other = 1;
+	ch->combined_count = vport->alloc_tqps;
+}
+
 static const struct hnae3_ae_ops hclge_ops = {
 	.init_ae_dev = hclge_init_ae_dev,
 	.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -5046,6 +5066,7 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
 	.set_vlan_filter = hclge_set_port_vlan_filter,
 	.set_vf_vlan_filter = hclge_set_vf_vlan_filter,
 	.reset_event = hclge_reset_event,
+	.get_channels = hclge_get_channels,
 };
 
 static struct hnae3_ae_algo ae_algo = {
-- 
1.9.1

[PATCH V3 net-next 02/17] net: hns3: add support to modify tqps number

[Lipeng]

This patch adds the support to change tqps number for PF driver
by using ehtool -L command.

Signed-off-by: qumingguang <qumingguang@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h        |   3 +
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c    | 122 +++++++++++++++++++++
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.h    |   2 +
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c |   1 +
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 112 +++++++++++++++++++
 5 files changed, 240 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index d887721..a5d3d22 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -388,6 +388,9 @@ struct hnae3_ae_ops {
 			    enum hnae3_reset_type reset);
 	void (*get_channels)(struct hnae3_handle *handle,
 			     struct ethtool_channels *ch);
+	void (*get_tqps_and_rss_info)(struct hnae3_handle *h,
+				      u16 *free_tqps, u16 *max_rss_size);
+	int (*set_channels)(struct hnae3_handle *handle, u32 new_tqps_num);
 };
 
 struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index c2c1323..7e92068 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2651,6 +2651,19 @@ static int hns3_get_ring_config(struct hns3_nic_priv *priv)
 	return ret;
 }
 
+static void hns3_put_ring_config(struct hns3_nic_priv *priv)
+{
+	struct hnae3_handle *h = priv->ae_handle;
+	int i;
+
+	for (i = 0; i < h->kinfo.num_tqps; i++) {
+		devm_kfree(priv->dev, priv->ring_data[i].ring);
+		devm_kfree(priv->dev,
+			   priv->ring_data[i + h->kinfo.num_tqps].ring);
+	}
+	devm_kfree(priv->dev, priv->ring_data);
+}
+
 static int hns3_alloc_ring_memory(struct hns3_enet_ring *ring)
 {
 	int ret;
@@ -3162,6 +3175,115 @@ static int hns3_reset_notify(struct hnae3_handle *handle,
 	return ret;
 }
 
+static u16 hns3_get_max_available_channels(struct net_device *netdev)
+{
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+	u16 free_tqps, max_rss_size, max_tqps;
+
+	h->ae_algo->ops->get_tqps_and_rss_info(h, &free_tqps, &max_rss_size);
+	max_tqps = h->kinfo.num_tc * max_rss_size;
+
+	return min_t(u16, max_tqps, (free_tqps + h->kinfo.num_tqps));
+}
+
+static int hns3_modify_tqp_num(struct net_device *netdev, u16 new_tqp_num)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+	int ret;
+
+	ret = h->ae_algo->ops->set_channels(h, new_tqp_num);
+	if (ret)
+		return ret;
+
+	ret = hns3_get_ring_config(priv);
+	if (ret)
+		return ret;
+
+	ret = hns3_nic_init_vector_data(priv);
+	if (ret)
+		goto err_uninit_vector;
+
+	ret = hns3_init_all_ring(priv);
+	if (ret)
+		goto err_put_ring;
+
+	return 0;
+
+err_put_ring:
+	hns3_put_ring_config(priv);
+err_uninit_vector:
+	hns3_nic_uninit_vector_data(priv);
+	return ret;
+}
+
+static int hns3_adjust_tqps_num(u8 num_tc, u32 new_tqp_num)
+{
+	return (new_tqp_num / num_tc) * num_tc;
+}
+
+int hns3_set_channels(struct net_device *netdev,
+		      struct ethtool_channels *ch)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+	struct hnae3_knic_private_info *kinfo = &h->kinfo;
+	bool if_running = netif_running(netdev);
+	u32 new_tqp_num = ch->combined_count;
+	u16 org_tqp_num;
+	int ret;
+
+	if (ch->rx_count || ch->tx_count)
+		return -EINVAL;
+
+	if (new_tqp_num > hns3_get_max_available_channels(netdev) ||
+	    new_tqp_num < kinfo->num_tc) {
+		dev_err(&netdev->dev,
+			"Change tqps fail, the tqp range is from %d to %d",
+			kinfo->num_tc,
+			hns3_get_max_available_channels(netdev));
+		return -EINVAL;
+	}
+
+	new_tqp_num = hns3_adjust_tqps_num(kinfo->num_tc, new_tqp_num);
+	if (kinfo->num_tqps == new_tqp_num)
+		return 0;
+
+	if (if_running)
+		dev_close(netdev);
+
+	hns3_clear_all_ring(h);
+
+	ret = hns3_nic_uninit_vector_data(priv);
+	if (ret) {
+		dev_err(&netdev->dev,
+			"Unbind vector with tqp fail, nothing is changed");
+		goto open_netdev;
+	}
+
+	hns3_uninit_all_ring(priv);
+
+	org_tqp_num = h->kinfo.num_tqps;
+	ret = hns3_modify_tqp_num(netdev, new_tqp_num);
+	if (ret) {
+		ret = hns3_modify_tqp_num(netdev, org_tqp_num);
+		if (ret) {
+			/* If revert to old tqp failed, fatal error occurred */
+			dev_err(&netdev->dev,
+				"Revert to old tqp num fail, ret=%d", ret);
+			return ret;
+		}
+		dev_info(&netdev->dev,
+			 "Change tqp num fail, Revert to old tqp num");
+	}
+
+open_netdev:
+	if (if_running)
+		dev_open(netdev);
+
+	return ret;
+}
+
 static const struct hnae3_client_ops client_ops = {
 	.init_instance = hns3_client_init,
 	.uninit_instance = hns3_client_uninit,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index 8a9de75..a2a7ea3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -595,6 +595,8 @@ static inline void hns3_write_reg(void __iomem *base, u32 reg, u32 value)
 	(((struct hns3_nic_priv *)netdev_priv(ndev))->ae_handle)
 
 void hns3_ethtool_set_ops(struct net_device *netdev);
+int hns3_set_channels(struct net_device *netdev,
+		      struct ethtool_channels *ch);
 
 bool hns3_clean_tx_ring(struct hns3_enet_ring *ring, int budget);
 int hns3_init_all_ring(struct hns3_nic_priv *priv);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 23af36c..1b2d79b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -893,6 +893,7 @@ void hns3_get_channels(struct net_device *netdev,
 	.set_link_ksettings = hns3_set_link_ksettings,
 	.nway_reset = hns3_nway_reset,
 	.get_channels = hns3_get_channels,
+	.set_channels = hns3_set_channels,
 };
 
 void hns3_ethtool_set_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a3101bc..7fab102 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5022,6 +5022,116 @@ static void hclge_get_channels(struct hnae3_handle *handle,
 	ch->combined_count = vport->alloc_tqps;
 }
 
+static void hclge_get_tqps_and_rss_info(struct hnae3_handle *handle,
+					u16 *free_tqps, u16 *max_rss_size)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+	u16 temp_tqps = 0;
+	int i;
+
+	for (i = 0; i < hdev->num_tqps; i++) {
+		if (!hdev->htqp[i].alloced)
+			temp_tqps++;
+	}
+	*free_tqps = temp_tqps;
+	*max_rss_size = hdev->rss_size_max;
+}
+
+static void hclge_release_tqp(struct hclge_vport *vport)
+{
+	struct hnae3_knic_private_info *kinfo = &vport->nic.kinfo;
+	struct hclge_dev *hdev = vport->back;
+	int i;
+
+	for (i = 0; i < kinfo->num_tqps; i++) {
+		struct hclge_tqp *tqp =
+			container_of(kinfo->tqp[i], struct hclge_tqp, q);
+
+		tqp->q.handle = NULL;
+		tqp->q.tqp_index = 0;
+		tqp->alloced = false;
+	}
+
+	devm_kfree(&hdev->pdev->dev, kinfo->tqp);
+	kinfo->tqp = NULL;
+}
+
+static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hnae3_knic_private_info *kinfo = &vport->nic.kinfo;
+	struct hclge_dev *hdev = vport->back;
+	int cur_rss_size = kinfo->rss_size;
+	int cur_tqps = kinfo->num_tqps;
+	u16 tc_offset[HCLGE_MAX_TC_NUM];
+	u16 tc_valid[HCLGE_MAX_TC_NUM];
+	u16 tc_size[HCLGE_MAX_TC_NUM];
+	u16 roundup_size;
+	u32 *rss_indir;
+	int ret, i;
+
+	hclge_release_tqp(vport);
+
+	ret = hclge_knic_setup(vport, new_tqps_num);
+	if (ret) {
+		dev_err(&hdev->pdev->dev, "setup nic fail, ret =%d\n", ret);
+		return ret;
+	}
+
+	ret = hclge_map_tqp_to_vport(hdev, vport);
+	if (ret) {
+		dev_err(&hdev->pdev->dev, "map vport tqp fail, ret =%d\n", ret);
+		return ret;
+	}
+
+	ret = hclge_tm_schd_init(hdev);
+	if (ret) {
+		dev_err(&hdev->pdev->dev, "tm schd init fail, ret =%d\n", ret);
+		return ret;
+	}
+
+	roundup_size = roundup_pow_of_two(kinfo->rss_size);
+	roundup_size = ilog2(roundup_size);
+	/* Set the RSS TC mode according to the new RSS size */
+	for (i = 0; i < HCLGE_MAX_TC_NUM; i++) {
+		tc_valid[i] = 0;
+
+		if (!(hdev->hw_tc_map & BIT(i)))
+			continue;
+
+		tc_valid[i] = 1;
+		tc_size[i] = roundup_size;
+		tc_offset[i] = kinfo->rss_size * i;
+	}
+	ret = hclge_set_rss_tc_mode(hdev, tc_valid, tc_size, tc_offset);
+	if (ret)
+		return ret;
+
+	/* Reinitializes the rss indirect table according to the new RSS size */
+	rss_indir = kcalloc(HCLGE_RSS_IND_TBL_SIZE, sizeof(u32), GFP_KERNEL);
+	if (!rss_indir)
+		return -ENOMEM;
+
+	for (i = 0; i < HCLGE_RSS_IND_TBL_SIZE; i++)
+		rss_indir[i] = i % kinfo->rss_size;
+
+	ret = hclge_set_rss(handle, rss_indir, NULL, 0);
+	if (ret)
+		dev_err(&hdev->pdev->dev, "set rss indir table fail, ret=%d\n",
+			ret);
+
+	kfree(rss_indir);
+
+	if (!ret)
+		dev_info(&hdev->pdev->dev,
+			 "Channels changed, rss_size from %d to %d, tqps from %d to %d",
+			 cur_rss_size, kinfo->rss_size,
+			 cur_tqps, kinfo->rss_size * kinfo->num_tc);
+
+	return ret;
+}
+
 static const struct hnae3_ae_ops hclge_ops = {
 	.init_ae_dev = hclge_init_ae_dev,
 	.uninit_ae_dev = hclge_uninit_ae_dev,
@@ -5066,6 +5176,8 @@ static void hclge_get_channels(struct hnae3_handle *handle,
 	.set_vlan_filter = hclge_set_port_vlan_filter,
 	.set_vf_vlan_filter = hclge_set_vf_vlan_filter,
 	.reset_event = hclge_reset_event,
+	.get_tqps_and_rss_info = hclge_get_tqps_and_rss_info,
+	.set_channels = hclge_set_channels,
 	.get_channels = hclge_get_channels,
 };
 
-- 
1.9.1

[PATCH V3 net-next 03/17] net: hns3: change the returned tqp number by ethtool -x

[Lipeng]

This patch modifies the return data of get_rxnfc, it will return
the current handle's rss_size but not the total tqp number.
because the tc_size has been change to the log2 of roundup
power of two of rss_size.

Signed-off-by: qumingguang <qumingguang@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 1b2d79b..2fd2656 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -730,7 +730,7 @@ static int hns3_get_rxnfc(struct net_device *netdev,
 
 	switch (cmd->cmd) {
 	case ETHTOOL_GRXRINGS:
-		cmd->data = h->kinfo.num_tc * h->kinfo.rss_size;
+		cmd->data = h->kinfo.rss_size;
 		break;
 	case ETHTOOL_GRXFH:
 		return h->ae_algo->ops->get_rss_tuple(h, cmd);
-- 
1.9.1

[PATCH V3 net-next 04/17] net: hns3: Free the ring_data structrue when change tqps

[Lipeng]

This patch fixes a memory leak problems in change tqps process,
the function hns3_uninit_all_ring and hns3_init_all_ring
may be called many times.

Signed-off-by: qumingguang <qumingguang@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 7e92068..1c93038 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2800,8 +2800,12 @@ int hns3_uninit_all_ring(struct hns3_nic_priv *priv)
 			h->ae_algo->ops->reset_queue(h, i);
 
 		hns3_fini_ring(priv->ring_data[i].ring);
+		devm_kfree(priv->dev, priv->ring_data[i].ring);
 		hns3_fini_ring(priv->ring_data[i + h->kinfo.num_tqps].ring);
+		devm_kfree(priv->dev,
+			   priv->ring_data[i + h->kinfo.num_tqps].ring);
 	}
+	devm_kfree(priv->dev, priv->ring_data);
 
 	return 0;
 }
-- 
1.9.1

[PATCH V3 net-next 05/17] net: hns3: Get rss_size_max from configuration but not hardcode

[Lipeng]

From: qumingguang <qumingguang@huawei.com>

Add configuration for rss_size_max in hdev but not hardcode it.

Signed-off-by: qumingguang <qumingguang@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h  | 2 ++
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +++++-
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 +
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index ce5ed88..1eb9ff0 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -399,6 +399,8 @@ struct hclge_pf_res_cmd {
 #define HCLGE_CFG_MAC_ADDR_H_M	GENMASK(15, 0)
 #define HCLGE_CFG_DEFAULT_SPEED_S	16
 #define HCLGE_CFG_DEFAULT_SPEED_M	GENMASK(23, 16)
+#define HCLGE_CFG_RSS_SIZE_S	24
+#define HCLGE_CFG_RSS_SIZE_M	GENMASK(31, 24)
 
 struct hclge_cfg_param_cmd {
 	__le32 offset;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 7fab102..691f85e 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -982,6 +982,10 @@ static void hclge_parse_cfg(struct hclge_cfg *cfg, struct hclge_desc *desc)
 	cfg->default_speed = hnae_get_field(__le32_to_cpu(req->param[3]),
 					    HCLGE_CFG_DEFAULT_SPEED_M,
 					    HCLGE_CFG_DEFAULT_SPEED_S);
+	cfg->rss_size_max = hnae_get_field(__le32_to_cpu(req->param[3]),
+					   HCLGE_CFG_RSS_SIZE_M,
+					   HCLGE_CFG_RSS_SIZE_S);
+
 	for (i = 0; i < ETH_ALEN; i++)
 		cfg->mac_addr[i] = (mac_addr_tmp >> (8 * i)) & 0xff;
 
@@ -1059,7 +1063,7 @@ static int hclge_configure(struct hclge_dev *hdev)
 
 	hdev->num_vmdq_vport = cfg.vmdq_vport_num;
 	hdev->base_tqp_pid = 0;
-	hdev->rss_size_max = 1;
+	hdev->rss_size_max = cfg.rss_size_max;
 	hdev->rx_buf_len = cfg.rx_buf_len;
 	ether_addr_copy(hdev->hw.mac.mac_addr, cfg.mac_addr);
 	hdev->hw.mac.media_type = cfg.media_type;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index fb043b5..4858909 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -220,6 +220,7 @@ struct hclge_cfg {
 	u8 tc_num;
 	u16 tqp_desc_num;
 	u16 rx_buf_len;
+	u16 rss_size_max;
 	u8 phy_addr;
 	u8 media_type;
 	u8 mac_addr[ETH_ALEN];
-- 
1.9.1

[PATCH V3 net-next 06/17] net: hns3: Add a mask initialization for mac_vlan table

[Lipeng]

This patch sets vlan masked, in order to avoid the received
packets being filtered.

Signed-off-by: Shenjian <shenjian15@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 10 ++++++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 39 +++++++++++++++++++++-
 2 files changed, 48 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 1eb9ff0..10adf86 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -191,6 +191,7 @@ enum hclge_opcode_type {
 	HCLGE_OPC_MAC_VLAN_INSERT	    = 0x1003,
 	HCLGE_OPC_MAC_ETHTYPE_ADD	    = 0x1010,
 	HCLGE_OPC_MAC_ETHTYPE_REMOVE	= 0x1011,
+	HCLGE_OPC_MAC_VLAN_MASK_SET	= 0x1012,
 
 	/* Multicast linear table cmd */
 	HCLGE_OPC_MTA_MAC_MODE_CFG	    = 0x1020,
@@ -589,6 +590,15 @@ struct hclge_mac_vlan_tbl_entry_cmd {
 	u8      rsv2[6];
 };
 
+#define HCLGE_VLAN_MASK_EN_B		0x0
+struct hclge_mac_vlan_mask_entry_cmd {
+	u8 rsv0[2];
+	u8 vlan_mask;
+	u8 rsv1;
+	u8 mac_mask[6];
+	u8 rsv2[14];
+};
+
 #define HCLGE_CFG_MTA_MAC_SEL_S		0x0
 #define HCLGE_CFG_MTA_MAC_SEL_M		GENMASK(1, 0)
 #define HCLGE_CFG_MTA_MAC_EN_B		0x7
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 691f85e..a1d9398 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2200,9 +2200,34 @@ static int hclge_get_autoneg(struct hnae3_handle *handle)
 	return hdev->hw.mac.autoneg;
 }
 
+static int hclge_set_default_mac_vlan_mask(struct hclge_dev *hdev,
+					   bool mask_vlan,
+					   u8 *mac_mask)
+{
+	struct hclge_mac_vlan_mask_entry_cmd *req;
+	struct hclge_desc desc;
+	int status;
+
+	req = (struct hclge_mac_vlan_mask_entry_cmd *)desc.data;
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_MASK_SET, false);
+
+	hnae_set_bit(req->vlan_mask, HCLGE_VLAN_MASK_EN_B,
+		     mask_vlan ? 1 : 0);
+	ether_addr_copy(req->mac_mask, mac_mask);
+
+	status = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (status)
+		dev_err(&hdev->pdev->dev,
+			"Config mac_vlan_mask failed for cmd_send, ret =%d\n",
+			status);
+
+	return status;
+}
+
 static int hclge_mac_init(struct hclge_dev *hdev)
 {
 	struct hclge_mac *mac = &hdev->hw.mac;
+	u8 mac_mask[ETH_ALEN] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 	int ret;
 
 	ret = hclge_cfg_mac_speed_dup(hdev, hdev->hw.mac.speed, HCLGE_MAC_FULL);
@@ -2228,7 +2253,19 @@ static int hclge_mac_init(struct hclge_dev *hdev)
 		return ret;
 	}
 
-	return hclge_cfg_func_mta_filter(hdev, 0, hdev->accept_mta_mc);
+	ret = hclge_cfg_func_mta_filter(hdev, 0, hdev->accept_mta_mc);
+	if (ret) {
+		dev_err(&hdev->pdev->dev,
+			"set mta filter mode fail ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = hclge_set_default_mac_vlan_mask(hdev, true, mac_mask);
+	if (ret)
+		dev_err(&hdev->pdev->dev,
+			"set default mac_vlan_mask fail ret=%d\n", ret);
+
+	return ret;
 }
 
 static void hclge_mbx_task_schedule(struct hclge_dev *hdev)
-- 
1.9.1

[PATCH V3 net-next 07/17] net: hns3: Add vlan offload config command

[Lipeng]

This patch adds vlan offload config commands, initializes
the rules of tx/rx vlan tag handle for hw.

Signed-off-by: Shenjian <shenjian15@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h |  45 ++++++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 158 ++++++++++++++++++++-
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |  36 +++++
 3 files changed, 233 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 10adf86..f5baba21 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -180,6 +180,10 @@ enum hclge_opcode_type {
 	/* Promisuous mode command */
 	HCLGE_OPC_CFG_PROMISC_MODE	= 0x0E01,
 
+	/* Vlan offload command */
+	HCLGE_OPC_VLAN_PORT_TX_CFG	= 0x0F01,
+	HCLGE_OPC_VLAN_PORT_RX_CFG	= 0x0F02,
+
 	/* Interrupts cmd */
 	HCLGE_OPC_ADD_RING_TO_VECTOR	= 0x1503,
 	HCLGE_OPC_DEL_RING_TO_VECTOR	= 0x1504,
@@ -670,6 +674,47 @@ struct hclge_vlan_filter_vf_cfg_cmd {
 	u8  vf_bitmap[16];
 };
 
+#define HCLGE_ACCEPT_TAG_B		0
+#define HCLGE_ACCEPT_UNTAG_B		1
+#define HCLGE_PORT_INS_TAG1_EN_B	2
+#define HCLGE_PORT_INS_TAG2_EN_B	3
+#define HCLGE_CFG_NIC_ROCE_SEL_B	4
+struct hclge_vport_vtag_tx_cfg_cmd {
+	u8 vport_vlan_cfg;
+	u8 vf_offset;
+	u8 rsv1[2];
+	__le16 def_vlan_tag1;
+	__le16 def_vlan_tag2;
+	u8 vf_bitmap[8];
+	u8 rsv2[8];
+};
+
+#define HCLGE_REM_TAG1_EN_B		0
+#define HCLGE_REM_TAG2_EN_B		1
+#define HCLGE_SHOW_TAG1_EN_B		2
+#define HCLGE_SHOW_TAG2_EN_B		3
+struct hclge_vport_vtag_rx_cfg_cmd {
+	u8 vport_vlan_cfg;
+	u8 vf_offset;
+	u8 rsv1[6];
+	u8 vf_bitmap[8];
+	u8 rsv2[8];
+};
+
+struct hclge_tx_vlan_type_cfg_cmd {
+	__le16 ot_vlan_type;
+	__le16 in_vlan_type;
+	u8 rsv[20];
+};
+
+struct hclge_rx_vlan_type_cfg_cmd {
+	__le16 ot_fst_vlan_type;
+	__le16 ot_sec_vlan_type;
+	__le16 in_fst_vlan_type;
+	__le16 in_sec_vlan_type;
+	u8 rsv[16];
+};
+
 struct hclge_cfg_com_tqp_queue_cmd {
 	__le16 tqp_id;
 	__le16 stream_id;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index a1d9398..113b859 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4380,23 +4380,169 @@ static int hclge_set_vf_vlan_filter(struct hnae3_handle *handle, int vfid,
 	return hclge_set_vf_vlan_common(hdev, vfid, false, vlan, qos, proto);
 }
 
+static int hclge_set_vlan_tx_offload_cfg(struct hclge_vport *vport)
+{
+	struct hclge_tx_vtag_cfg *vcfg = &vport->txvlan_cfg;
+	struct hclge_vport_vtag_tx_cfg_cmd *req;
+	struct hclge_dev *hdev = vport->back;
+	struct hclge_desc desc;
+	int status;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_PORT_TX_CFG, false);
+
+	req = (struct hclge_vport_vtag_tx_cfg_cmd *)desc.data;
+	req->def_vlan_tag1 = cpu_to_le16(vcfg->default_tag1);
+	req->def_vlan_tag2 = cpu_to_le16(vcfg->default_tag2);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_ACCEPT_TAG_B,
+		     vcfg->accept_tag ? 1 : 0);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_ACCEPT_UNTAG_B,
+		     vcfg->accept_untag ? 1 : 0);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_PORT_INS_TAG1_EN_B,
+		     vcfg->insert_tag1_en ? 1 : 0);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_PORT_INS_TAG2_EN_B,
+		     vcfg->insert_tag2_en ? 1 : 0);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_CFG_NIC_ROCE_SEL_B, 0);
+
+	req->vf_offset = vport->vport_id / HCLGE_VF_NUM_PER_CMD;
+	req->vf_bitmap[req->vf_offset] =
+		1 << (vport->vport_id % HCLGE_VF_NUM_PER_BYTE);
+
+	status = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (status)
+		dev_err(&hdev->pdev->dev,
+			"Send port txvlan cfg command fail, ret =%d\n",
+			status);
+
+	return status;
+}
+
+static int hclge_set_vlan_rx_offload_cfg(struct hclge_vport *vport)
+{
+	struct hclge_rx_vtag_cfg *vcfg = &vport->rxvlan_cfg;
+	struct hclge_vport_vtag_rx_cfg_cmd *req;
+	struct hclge_dev *hdev = vport->back;
+	struct hclge_desc desc;
+	int status;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_VLAN_PORT_RX_CFG, false);
+
+	req = (struct hclge_vport_vtag_rx_cfg_cmd *)desc.data;
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_REM_TAG1_EN_B,
+		     vcfg->strip_tag1_en ? 1 : 0);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_REM_TAG2_EN_B,
+		     vcfg->strip_tag2_en ? 1 : 0);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_SHOW_TAG1_EN_B,
+		     vcfg->vlan1_vlan_prionly ? 1 : 0);
+	hnae_set_bit(req->vport_vlan_cfg, HCLGE_SHOW_TAG2_EN_B,
+		     vcfg->vlan2_vlan_prionly ? 1 : 0);
+
+	req->vf_offset = vport->vport_id / HCLGE_VF_NUM_PER_CMD;
+	req->vf_bitmap[req->vf_offset] =
+		1 << (vport->vport_id % HCLGE_VF_NUM_PER_BYTE);
+
+	status = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (status)
+		dev_err(&hdev->pdev->dev,
+			"Send port rxvlan cfg command fail, ret =%d\n",
+			status);
+
+	return status;
+}
+
+static int hclge_set_vlan_protocol_type(struct hclge_dev *hdev)
+{
+	struct hclge_rx_vlan_type_cfg_cmd *rx_req;
+	struct hclge_tx_vlan_type_cfg_cmd *tx_req;
+	struct hclge_desc desc;
+	int status;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_TYPE_ID, false);
+	rx_req = (struct hclge_rx_vlan_type_cfg_cmd *)desc.data;
+	rx_req->ot_fst_vlan_type =
+		cpu_to_le16(hdev->vlan_type_cfg.rx_ot_fst_vlan_type);
+	rx_req->ot_sec_vlan_type =
+		cpu_to_le16(hdev->vlan_type_cfg.rx_ot_sec_vlan_type);
+	rx_req->in_fst_vlan_type =
+		cpu_to_le16(hdev->vlan_type_cfg.rx_in_fst_vlan_type);
+	rx_req->in_sec_vlan_type =
+		cpu_to_le16(hdev->vlan_type_cfg.rx_in_sec_vlan_type);
+
+	status = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (status) {
+		dev_err(&hdev->pdev->dev,
+			"Send rxvlan protocol type command fail, ret =%d\n",
+			status);
+		return status;
+	}
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_INSERT, false);
+
+	tx_req = (struct hclge_tx_vlan_type_cfg_cmd *)&desc.data;
+	tx_req->ot_vlan_type = cpu_to_le16(hdev->vlan_type_cfg.tx_ot_vlan_type);
+	tx_req->in_vlan_type = cpu_to_le16(hdev->vlan_type_cfg.tx_in_vlan_type);
+
+	status = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (status)
+		dev_err(&hdev->pdev->dev,
+			"Send txvlan protocol type command fail, ret =%d\n",
+			status);
+
+	return status;
+}
+
 static int hclge_init_vlan_config(struct hclge_dev *hdev)
 {
-#define HCLGE_VLAN_TYPE_VF_TABLE   0
-#define HCLGE_VLAN_TYPE_PORT_TABLE 1
+#define HCLGE_FILTER_TYPE_VF		0
+#define HCLGE_FILTER_TYPE_PORT		1
+#define HCLGE_DEF_VLAN_TYPE		0x8100
+
 	struct hnae3_handle *handle;
+	struct hclge_vport *vport;
 	int ret;
+	int i;
+
+	ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_VF, true);
+	if (ret)
+		return ret;
 
-	ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_VLAN_TYPE_VF_TABLE,
-					 true);
+	ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_FILTER_TYPE_PORT, true);
 	if (ret)
 		return ret;
 
-	ret = hclge_set_vlan_filter_ctrl(hdev, HCLGE_VLAN_TYPE_PORT_TABLE,
-					 true);
+	hdev->vlan_type_cfg.rx_in_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
+	hdev->vlan_type_cfg.rx_in_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
+	hdev->vlan_type_cfg.rx_ot_fst_vlan_type = HCLGE_DEF_VLAN_TYPE;
+	hdev->vlan_type_cfg.rx_ot_sec_vlan_type = HCLGE_DEF_VLAN_TYPE;
+	hdev->vlan_type_cfg.tx_ot_vlan_type = HCLGE_DEF_VLAN_TYPE;
+	hdev->vlan_type_cfg.tx_in_vlan_type = HCLGE_DEF_VLAN_TYPE;
+
+	ret = hclge_set_vlan_protocol_type(hdev);
 	if (ret)
 		return ret;
 
+	for (i = 0; i < hdev->num_alloc_vport; i++) {
+		vport = &hdev->vport[i];
+		vport->txvlan_cfg.accept_tag = true;
+		vport->txvlan_cfg.accept_untag = true;
+		vport->txvlan_cfg.insert_tag1_en = false;
+		vport->txvlan_cfg.insert_tag2_en = false;
+		vport->txvlan_cfg.default_tag1 = 0;
+		vport->txvlan_cfg.default_tag2 = 0;
+
+		ret = hclge_set_vlan_tx_offload_cfg(vport);
+		if (ret)
+			return ret;
+
+		vport->rxvlan_cfg.strip_tag1_en = false;
+		vport->rxvlan_cfg.strip_tag2_en = true;
+		vport->rxvlan_cfg.vlan1_vlan_prionly = false;
+		vport->rxvlan_cfg.vlan2_vlan_prionly = false;
+
+		ret = hclge_set_vlan_rx_offload_cfg(vport);
+		if (ret)
+			return ret;
+	}
+
 	handle = &hdev->vport[0].nic;
 	return hclge_set_port_vlan_filter(handle, htons(ETH_P_8021Q), 0, false);
 }
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 4858909..cda520c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -79,6 +79,10 @@
 #define HCLGE_PHY_MDIX_STATUS_B	(6)
 #define HCLGE_PHY_SPEED_DUP_RESOLVE_B	(11)
 
+/* Factor used to calculate offset and bitmap of VF num */
+#define HCLGE_VF_NUM_PER_CMD           64
+#define HCLGE_VF_NUM_PER_BYTE          8
+
 /* Reset related Registers */
 #define HCLGE_MISC_RESET_STS_REG	0x20700
 #define HCLGE_GLOBAL_RESET_REG		0x20A00
@@ -424,6 +428,15 @@ struct hclge_hw_stats {
 	struct hclge_32_bit_stats   all_32_bit_stats;
 };
 
+struct hclge_vlan_type_cfg {
+	u16 rx_ot_fst_vlan_type;
+	u16 rx_ot_sec_vlan_type;
+	u16 rx_in_fst_vlan_type;
+	u16 rx_in_sec_vlan_type;
+	u16 tx_ot_vlan_type;
+	u16 tx_in_vlan_type;
+};
+
 struct hclge_dev {
 	struct pci_dev *pdev;
 	struct hnae3_ae_dev *ae_dev;
@@ -510,6 +523,26 @@ struct hclge_dev {
 	enum hclge_mta_dmac_sel_type mta_mac_sel_type;
 	bool enable_mta; /* Mutilcast filter enable */
 	bool accept_mta_mc; /* Whether accept mta filter multicast */
+
+	struct hclge_vlan_type_cfg vlan_type_cfg;
+};
+
+/* VPort level vlan tag configuration for TX direction */
+struct hclge_tx_vtag_cfg {
+	bool accept_tag;	/* Whether accept tagged packet from host */
+	bool accept_untag;	/* Whether accept untagged packet from host */
+	bool insert_tag1_en;	/* Whether insert inner vlan tag */
+	bool insert_tag2_en;	/* Whether insert outer vlan tag */
+	u16  default_tag1;	/* The default inner vlan tag to insert */
+	u16  default_tag2;	/* The default outer vlan tag to insert */
+};
+
+/* VPort level vlan tag configuration for RX direction */
+struct hclge_rx_vtag_cfg {
+	bool strip_tag1_en;	/* Whether strip inner vlan tag */
+	bool strip_tag2_en;	/* Whether strip outer vlan tag */
+	bool vlan1_vlan_prionly;/* Inner VLAN Tag up to descriptor Enable */
+	bool vlan2_vlan_prionly;/* Outer VLAN Tag up to descriptor Enable */
 };
 
 struct hclge_vport {
@@ -524,6 +557,9 @@ struct hclge_vport {
 	u16 bw_limit;		/* VSI BW Limit (0 = disabled) */
 	u8  dwrr;
 
+	struct hclge_tx_vtag_cfg  txvlan_cfg;
+	struct hclge_rx_vtag_cfg  rxvlan_cfg;
+
 	int vport_id;
 	struct hclge_dev *back;  /* Back reference to associated dev */
 	struct hnae3_handle nic;
-- 
1.9.1

[PATCH V3 net-next 08/17] net: hns3: Add ethtool related offload command

[Lipeng]

This patch adds offload command related to "ethtool -K".

Signed-off-by: Shenjian <shenjian15@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h             |  3 +++
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c         | 16 ++++++++++++++++
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 13 +++++++++++++
 3 files changed, 32 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index a5d3d22..a67d02a9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -278,6 +278,8 @@ struct hnae3_ae_dev {
  *   Set vlan filter config of Ports
  * set_vf_vlan_filter()
  *   Set vlan filter config of vf
+ * enable_hw_strip_rxvtag()
+ *   Enable/disable hardware strip vlan tag of packets received
  */
 struct hnae3_ae_ops {
 	int (*init_ae_dev)(struct hnae3_ae_dev *ae_dev);
@@ -384,6 +386,7 @@ struct hnae3_ae_ops {
 			       u16 vlan_id, bool is_kill);
 	int (*set_vf_vlan_filter)(struct hnae3_handle *handle, int vfid,
 				  u16 vlan, u8 qos, __be16 proto);
+	int (*enable_hw_strip_rxvtag)(struct hnae3_handle *handle, bool enable);
 	void (*reset_event)(struct hnae3_handle *handle,
 			    enum hnae3_reset_type reset);
 	void (*get_channels)(struct hnae3_handle *handle,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 1c93038..301b329 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1032,6 +1032,9 @@ static int hns3_nic_set_features(struct net_device *netdev,
 				 netdev_features_t features)
 {
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hnae3_handle *h = priv->ae_handle;
+	netdev_features_t changed;
+	int ret;
 
 	if (features & (NETIF_F_TSO | NETIF_F_TSO6)) {
 		priv->ops.fill_desc = hns3_fill_desc_tso;
@@ -1041,6 +1044,17 @@ static int hns3_nic_set_features(struct net_device *netdev,
 		priv->ops.maybe_stop_tx = hns3_nic_maybe_stop_tx;
 	}
 
+	changed = netdev->features ^ features;
+	if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
+		if (features & NETIF_F_HW_VLAN_CTAG_RX)
+			ret = h->ae_algo->ops->enable_hw_strip_rxvtag(h, true);
+		else
+			ret = h->ae_algo->ops->enable_hw_strip_rxvtag(h, false);
+
+		if (ret)
+			return ret;
+	}
+
 	netdev->features = features;
 	return 0;
 }
@@ -1492,6 +1506,7 @@ static void hns3_set_default_feature(struct net_device *netdev)
 
 	netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 		NETIF_F_HW_VLAN_CTAG_FILTER |
+		NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
 		NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_GSO |
 		NETIF_F_GRO | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_GRE |
 		NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_UDP_TUNNEL |
@@ -1506,6 +1521,7 @@ static void hns3_set_default_feature(struct net_device *netdev)
 
 	netdev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 		NETIF_F_HW_VLAN_CTAG_FILTER |
+		NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
 		NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_GSO |
 		NETIF_F_GRO | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_GRE |
 		NETIF_F_GSO_GRE_CSUM | NETIF_F_GSO_UDP_TUNNEL |
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 113b859..d77a6de 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4547,6 +4547,18 @@ static int hclge_init_vlan_config(struct hclge_dev *hdev)
 	return hclge_set_port_vlan_filter(handle, htons(ETH_P_8021Q), 0, false);
 }
 
+static int hclge_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+
+	vport->rxvlan_cfg.strip_tag1_en = false;
+	vport->rxvlan_cfg.strip_tag2_en = enable;
+	vport->rxvlan_cfg.vlan1_vlan_prionly = false;
+	vport->rxvlan_cfg.vlan2_vlan_prionly = false;
+
+	return hclge_set_vlan_rx_offload_cfg(vport);
+}
+
 static int hclge_set_mtu(struct hnae3_handle *handle, int new_mtu)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
@@ -5362,6 +5374,7 @@ static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num)
 	.get_mdix_mode = hclge_get_mdix_mode,
 	.set_vlan_filter = hclge_set_port_vlan_filter,
 	.set_vf_vlan_filter = hclge_set_vf_vlan_filter,
+	.enable_hw_strip_rxvtag = hclge_en_hw_strip_rxvtag,
 	.reset_event = hclge_reset_event,
 	.get_tqps_and_rss_info = hclge_get_tqps_and_rss_info,
 	.set_channels = hclge_set_channels,
-- 
1.9.1

[PATCH V3 net-next 09/17] net: hns3: Add handling vlan tag offload in bd

[Lipeng]

This patch deals with the vlan tag information between
sk_buff and rx/tx bd.

Signed-off-by: Shenjian <shenjian15@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 83 +++++++++++++++++++++++--
 1 file changed, 78 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 301b329..320ae88 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -723,6 +723,58 @@ static void hns3_set_txbd_baseinfo(u16 *bdtp_fe_sc_vld_ra_ri, int frag_end)
 	hnae_set_field(*bdtp_fe_sc_vld_ra_ri, HNS3_TXD_SC_M, HNS3_TXD_SC_S, 0);
 }
 
+static int hns3_fill_desc_vtags(struct sk_buff *skb,
+				struct hns3_enet_ring *tx_ring,
+				u32 *inner_vlan_flag,
+				u32 *out_vlan_flag,
+				u16 *inner_vtag,
+				u16 *out_vtag)
+{
+#define HNS3_TX_VLAN_PRIO_SHIFT 13
+
+	if (skb->protocol == htons(ETH_P_8021Q) &&
+	    !(tx_ring->tqp->handle->kinfo.netdev->features &
+	    NETIF_F_HW_VLAN_CTAG_TX)) {
+		/* When HW VLAN acceleration is turned off, and the stack
+		 * sets the protocol to 802.1q, the driver just need to
+		 * set the protocol to the encapsulated ethertype.
+		 */
+		skb->protocol = vlan_get_protocol(skb);
+		return 0;
+	}
+
+	if (skb_vlan_tag_present(skb)) {
+		u16 vlan_tag;
+
+		vlan_tag = skb_vlan_tag_get(skb);
+		vlan_tag |= (skb->priority & 0x7) << HNS3_TX_VLAN_PRIO_SHIFT;
+
+		/* Based on hw strategy, use out_vtag in two layer tag case,
+		 * and use inner_vtag in one tag case.
+		 */
+		if (skb->protocol == htons(ETH_P_8021Q)) {
+			hnae_set_bit(*out_vlan_flag, HNS3_TXD_OVLAN_B, 1);
+			*out_vtag = vlan_tag;
+		} else {
+			hnae_set_bit(*inner_vlan_flag, HNS3_TXD_VLAN_B, 1);
+			*inner_vtag = vlan_tag;
+		}
+	} else if (skb->protocol == htons(ETH_P_8021Q)) {
+		struct vlan_ethhdr *vhdr;
+		int rc;
+
+		rc = skb_cow_head(skb, 0);
+		if (rc < 0)
+			return rc;
+		vhdr = (struct vlan_ethhdr *)skb->data;
+		vhdr->h_vlan_TCI |= cpu_to_be16((skb->priority & 0x7)
+					<< HNS3_TX_VLAN_PRIO_SHIFT);
+	}
+
+	skb->protocol = vlan_get_protocol(skb);
+	return 0;
+}
+
 static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv,
 			  int size, dma_addr_t dma, int frag_end,
 			  enum hns_desc_type type)
@@ -733,6 +785,8 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv,
 	u16 bdtp_fe_sc_vld_ra_ri = 0;
 	u32 type_cs_vlan_tso = 0;
 	struct sk_buff *skb;
+	u16 inner_vtag = 0;
+	u16 out_vtag = 0;
 	u32 paylen = 0;
 	u16 mss = 0;
 	__be16 protocol;
@@ -756,15 +810,16 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv,
 		skb = (struct sk_buff *)priv;
 		paylen = skb->len;
 
+		ret = hns3_fill_desc_vtags(skb, ring, &type_cs_vlan_tso,
+					   &ol_type_vlan_len_msec,
+					   &inner_vtag, &out_vtag);
+		if (unlikely(ret))
+			return ret;
+
 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
 			skb_reset_mac_len(skb);
 			protocol = skb->protocol;
 
-			/* vlan packet*/
-			if (protocol == htons(ETH_P_8021Q)) {
-				protocol = vlan_get_protocol(skb);
-				skb->protocol = protocol;
-			}
 			ret = hns3_get_l4_protocol(skb, &ol4_proto, &il4_proto);
 			if (ret)
 				return ret;
@@ -790,6 +845,8 @@ static int hns3_fill_desc(struct hns3_enet_ring *ring, void *priv,
 			cpu_to_le32(type_cs_vlan_tso);
 		desc->tx.paylen = cpu_to_le32(paylen);
 		desc->tx.mss = cpu_to_le16(mss);
+		desc->tx.vlan_tag = cpu_to_le16(inner_vtag);
+		desc->tx.outer_vlan_tag = cpu_to_le16(out_vtag);
 	}
 
 	/* move ring pointer to next.*/
@@ -2101,6 +2158,22 @@ static int hns3_handle_rx_bd(struct hns3_enet_ring *ring,
 
 	prefetchw(skb->data);
 
+	/* Based on hw strategy, the tag offloaded will be stored at
+	 * ot_vlan_tag in two layer tag case, and stored at vlan_tag
+	 * in one layer tag case.
+	 */
+	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) {
+		u16 vlan_tag;
+
+		vlan_tag = le16_to_cpu(desc->rx.ot_vlan_tag);
+		if (!(vlan_tag & VLAN_VID_MASK))
+			vlan_tag = le16_to_cpu(desc->rx.vlan_tag);
+		if (vlan_tag & VLAN_VID_MASK)
+			__vlan_hwaccel_put_tag(skb,
+					       htons(ETH_P_8021Q),
+					       vlan_tag);
+	}
+
 	bnum = 1;
 	if (length <= HNS3_RX_HEAD_SIZE) {
 		memcpy(__skb_put(skb, length), va, ALIGN(length, sizeof(long)));
-- 
1.9.1

[PATCH V3 net-next 10/17] net: hns3: cleanup mac auto-negotiation state query

[Lipeng]

From: Fuyun Liang <liangfuyun1@huawei.com>

When checking whether auto-negotiation is on, driver only needs to
check the value of mac.autoneg(SW) directly, and does not need to
query it from hardware. Because this value is always synchronized
with the auto-negotiation state of hardware.

This patch removes the mac auto-negotiation state query.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 24 ----------------------
 1 file changed, 24 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index d77a6de..046f4bb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2137,28 +2137,6 @@ static int hclge_query_mac_an_speed_dup(struct hclge_dev *hdev, int *speed,
 	return 0;
 }
 
-static int hclge_query_autoneg_result(struct hclge_dev *hdev)
-{
-	struct hclge_mac *mac = &hdev->hw.mac;
-	struct hclge_query_an_speed_dup_cmd *req;
-	struct hclge_desc desc;
-	int ret;
-
-	req = (struct hclge_query_an_speed_dup_cmd *)desc.data;
-
-	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_QUERY_AN_RESULT, true);
-	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
-	if (ret) {
-		dev_err(&hdev->pdev->dev,
-			"autoneg result query cmd failed %d.\n", ret);
-		return ret;
-	}
-
-	mac->autoneg = hnae_get_bit(req->an_syn_dup_speed, HCLGE_QUERY_AN_B);
-
-	return 0;
-}
-
 static int hclge_set_autoneg_en(struct hclge_dev *hdev, bool enable)
 {
 	struct hclge_config_auto_neg_cmd *req;
@@ -2195,8 +2173,6 @@ static int hclge_get_autoneg(struct hnae3_handle *handle)
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
 
-	hclge_query_autoneg_result(hdev);
-
 	return hdev->hw.mac.autoneg;
 }
 
-- 
1.9.1

[PATCH V3 net-next 11/17] net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg

[Lipeng]

From: Fuyun Liang <liangfuyun1@huawei.com>

When phy exists, we use the value of phydev.autoneg to represent the
auto-negotiation state of hardware. Otherwise, we use the value of
mac.autoneg to represent it.

This patch fixes for getting a error value of auto-negotiation state in
hclge_get_autoneg().

Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 046f4bb..14e1054 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2172,6 +2172,10 @@ static int hclge_get_autoneg(struct hnae3_handle *handle)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+
+	if (phydev)
+		return phydev->autoneg;
 
 	return hdev->hw.mac.autoneg;
 }
-- 
1.9.1

[PATCH V3 net-next 12/17] net: hns3: add support for set_pauseparam

[Lipeng]

This patch adds set_pauseparam support for ethtool cmd.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 13 ++++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 83 ++++++++++++++++++++++
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c  |  2 +-
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h  |  1 +
 4 files changed, 98 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 2fd2656..b829ec7 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -559,6 +559,18 @@ static void hns3_get_pauseparam(struct net_device *netdev,
 			&param->rx_pause, &param->tx_pause);
 }
 
+static int hns3_set_pauseparam(struct net_device *netdev,
+			       struct ethtool_pauseparam *param)
+{
+	struct hnae3_handle *h = hns3_get_handle(netdev);
+
+	if (h->ae_algo->ops->set_pauseparam)
+		return h->ae_algo->ops->set_pauseparam(h, param->autoneg,
+						       param->rx_pause,
+						       param->tx_pause);
+	return -EOPNOTSUPP;
+}
+
 static int hns3_get_link_ksettings(struct net_device *netdev,
 				   struct ethtool_link_ksettings *cmd)
 {
@@ -880,6 +892,7 @@ void hns3_get_channels(struct net_device *netdev,
 	.get_ringparam = hns3_get_ringparam,
 	.set_ringparam = hns3_set_ringparam,
 	.get_pauseparam = hns3_get_pauseparam,
+	.set_pauseparam = hns3_set_pauseparam,
 	.get_strings = hns3_get_strings,
 	.get_ethtool_stats = hns3_get_stats,
 	.get_sset_count = hns3_get_sset_count,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 14e1054..0f55ee6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4660,6 +4660,53 @@ static u32 hclge_get_fw_version(struct hnae3_handle *handle)
 	return hdev->fw_version;
 }
 
+static void hclge_set_flowctrl_adv(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
+{
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+
+	if (!phydev)
+		return;
+
+	phydev->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+
+	if (rx_en)
+		phydev->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+
+	if (tx_en)
+		phydev->advertising ^= ADVERTISED_Asym_Pause;
+}
+
+static int hclge_cfg_pauseparam(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
+{
+	enum hclge_fc_mode fc_mode;
+	int ret;
+
+	if (rx_en && tx_en)
+		fc_mode = HCLGE_FC_FULL;
+	else if (rx_en && !tx_en)
+		fc_mode = HCLGE_FC_RX_PAUSE;
+	else if (!rx_en && tx_en)
+		fc_mode = HCLGE_FC_TX_PAUSE;
+	else
+		fc_mode = HCLGE_FC_NONE;
+
+	if (hdev->tm_info.fc_mode == HCLGE_FC_PFC) {
+		hdev->fc_mode_last_time = fc_mode;
+		return 0;
+	}
+
+	ret = hclge_mac_pause_en_cfg(hdev, tx_en, rx_en);
+	if (ret) {
+		dev_err(&hdev->pdev->dev, "configure pauseparam error, ret = %d.\n",
+			ret);
+		return ret;
+	}
+
+	hdev->tm_info.fc_mode = fc_mode;
+
+	return 0;
+}
+
 static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg,
 				 u32 *rx_en, u32 *tx_en)
 {
@@ -4689,6 +4736,41 @@ static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg,
 	}
 }
 
+static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg,
+				u32 rx_en, u32 tx_en)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+	u32 fc_autoneg;
+
+	/* Only support flow control negotiation for netdev with
+	 * phy attached for now.
+	 */
+	if (!phydev)
+		return -EOPNOTSUPP;
+
+	fc_autoneg = hclge_get_autoneg(handle);
+	if (auto_neg != fc_autoneg) {
+		dev_info(&hdev->pdev->dev,
+			 "To change autoneg please use: ethtool -s <dev> autoneg <on|off>\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (hdev->tm_info.fc_mode == HCLGE_FC_PFC) {
+		dev_info(&hdev->pdev->dev,
+			 "Priority flow control enabled. Cannot set link flow control.\n");
+		return -EOPNOTSUPP;
+	}
+
+	hclge_set_flowctrl_adv(hdev, rx_en, tx_en);
+
+	if (!fc_autoneg)
+		return hclge_cfg_pauseparam(hdev, rx_en, tx_en);
+
+	return phy_start_aneg(phydev);
+}
+
 static void hclge_get_ksettings_an_result(struct hnae3_handle *handle,
 					  u8 *auto_neg, u32 *speed, u8 *duplex)
 {
@@ -5344,6 +5426,7 @@ static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num)
 	.set_autoneg = hclge_set_autoneg,
 	.get_autoneg = hclge_get_autoneg,
 	.get_pauseparam = hclge_get_pauseparam,
+	.set_pauseparam = hclge_set_pauseparam,
 	.set_mtu = hclge_set_mtu,
 	.reset_queue = hclge_reset_tqp,
 	.get_stats = hclge_get_stats,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 7bfa2e5..7cfe1eb 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -112,7 +112,7 @@ static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
 	return 0;
 }
 
-static int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx)
+int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx)
 {
 	struct hclge_desc desc;
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
index bf59961..16f4139 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
@@ -118,4 +118,5 @@ struct hclge_port_shapping_cmd {
 int hclge_tm_dwrr_cfg(struct hclge_dev *hdev);
 int hclge_tm_map_cfg(struct hclge_dev *hdev);
 int hclge_tm_init_hw(struct hclge_dev *hdev);
+int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx);
 #endif
-- 
1.9.1

[PATCH V3 net-next 13/17] net: hns3: add support to update flow control settings after autoneg

[Lipeng]

When auto-negotiation is enabled, the MAC flow control settings is
based on the flow control negotiation result. And it should be configured
after a valid link has been established. This patch adds support to update
flow control settings after auto-negotiation has completed.

Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 36 ++++++++++++++++++++++
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |  1 +
 .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c    |  4 +++
 3 files changed, 41 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 0f55ee6..bb31212 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4707,6 +4707,42 @@ static int hclge_cfg_pauseparam(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
 	return 0;
 }
 
+int hclge_cfg_flowctrl(struct hclge_dev *hdev)
+{
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+	u16 remote_advertising = 0;
+	u16 local_advertising = 0;
+	u32 rx_pause, tx_pause;
+	u8 flowctl;
+
+	if (!phydev->link || !phydev->autoneg)
+		return 0;
+
+	if (phydev->advertising & ADVERTISED_Pause)
+		local_advertising = ADVERTISE_PAUSE_CAP;
+
+	if (phydev->advertising & ADVERTISED_Asym_Pause)
+		local_advertising |= ADVERTISE_PAUSE_ASYM;
+
+	if (phydev->pause)
+		remote_advertising = LPA_PAUSE_CAP;
+
+	if (phydev->asym_pause)
+		remote_advertising |= LPA_PAUSE_ASYM;
+
+	flowctl = mii_resolve_flowctrl_fdx(local_advertising,
+					   remote_advertising);
+	tx_pause = flowctl & FLOW_CTRL_TX;
+	rx_pause = flowctl & FLOW_CTRL_RX;
+
+	if (phydev->duplex == HCLGE_MAC_HALF) {
+		tx_pause = 0;
+		rx_pause = 0;
+	}
+
+	return hclge_cfg_pauseparam(hdev, rx_pause, tx_pause);
+}
+
 static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg,
 				 u32 *rx_en, u32 *tx_en)
 {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index cda520c..28cc063 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -602,4 +602,5 @@ int hclge_set_vf_vlan_common(struct hclge_dev *vport, int vfid,
 
 void hclge_mbx_handler(struct hclge_dev *hdev);
 void hclge_reset_tqp(struct hnae3_handle *handle, u16 queue_id);
+int hclge_cfg_flowctrl(struct hclge_dev *hdev);
 #endif
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 7069e94..3745153 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -183,6 +183,10 @@ static void hclge_mac_adjust_link(struct net_device *netdev)
 	ret = hclge_cfg_mac_speed_dup(hdev, speed, duplex);
 	if (ret)
 		netdev_err(netdev, "failed to adjust link.\n");
+
+	ret = hclge_cfg_flowctrl(hdev);
+	if (ret)
+		netdev_err(netdev, "failed to configure flow control.\n");
 }
 
 int hclge_mac_start_phy(struct hclge_dev *hdev)
-- 
1.9.1

[PATCH V3 net-next 14/17] net: hns3: add Asym Pause support to phy default features

[Lipeng]

From: Fuyun Liang <liangfuyun1@huawei.com>

commit c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature
initialization") adds default supported features for phy, but our hardware
also supports Asym Pause. This patch adds Asym Pause support to phy
default features to prevent Asym Pause can not be advertised when the phy
negotiates flow control.

Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 3745153..c1dea3a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -17,6 +17,7 @@
 #define HCLGE_PHY_SUPPORTED_FEATURES	(SUPPORTED_Autoneg | \
 					 SUPPORTED_TP | \
 					 SUPPORTED_Pause | \
+					 SUPPORTED_Asym_Pause | \
 					 PHY_10BT_FEATURES | \
 					 PHY_100BT_FEATURES | \
 					 PHY_1000BT_FEATURES)
-- 
1.9.1

[PATCH V3 net-next 15/17] net: hns3: add support for querying advertised pause frame by ethtool ethx

[Lipeng]

This patch adds support for querying advertised pause frame by using
ethtool command(ethtool ethx).

Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.h             |  2 ++
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c      | 15 +++++++++++++++
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 15 +++++++++++++++
 3 files changed, 32 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index a67d02a9..82e9a80 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -394,6 +394,8 @@ struct hnae3_ae_ops {
 	void (*get_tqps_and_rss_info)(struct hnae3_handle *h,
 				      u16 *free_tqps, u16 *max_rss_size);
 	int (*set_channels)(struct hnae3_handle *handle, u32 new_tqps_num);
+	void (*get_flowctrl_adv)(struct hnae3_handle *handle,
+				 u32 *flowctrl_adv);
 };
 
 struct hnae3_dcb_ops {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index b829ec7..2ae4d39 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -575,6 +575,7 @@ static int hns3_get_link_ksettings(struct net_device *netdev,
 				   struct ethtool_link_ksettings *cmd)
 {
 	struct hnae3_handle *h = hns3_get_handle(netdev);
+	u32 flowctrl_adv = 0;
 	u32 supported_caps;
 	u32 advertised_caps;
 	u8 media_type = HNAE3_MEDIA_TYPE_UNKNOWN;
@@ -650,6 +651,8 @@ static int hns3_get_link_ksettings(struct net_device *netdev,
 		if (!cmd->base.autoneg)
 			advertised_caps &= ~HNS3_LM_AUTONEG_BIT;
 
+		advertised_caps &= ~HNS3_LM_PAUSE_BIT;
+
 		/* now, map driver link modes to ethtool link modes */
 		hns3_driv_to_eth_caps(supported_caps, cmd, false);
 		hns3_driv_to_eth_caps(advertised_caps, cmd, true);
@@ -662,6 +665,18 @@ static int hns3_get_link_ksettings(struct net_device *netdev,
 	/* 4.mdio_support */
 	cmd->base.mdio_support = ETH_MDIO_SUPPORTS_C22;
 
+	/* 5.get flow control setttings */
+	if (h->ae_algo->ops->get_flowctrl_adv)
+		h->ae_algo->ops->get_flowctrl_adv(h, &flowctrl_adv);
+
+	if (flowctrl_adv & ADVERTISED_Pause)
+		ethtool_link_ksettings_add_link_mode(cmd, advertising,
+						     Pause);
+
+	if (flowctrl_adv & ADVERTISED_Asym_Pause)
+		ethtool_link_ksettings_add_link_mode(cmd, advertising,
+						     Asym_Pause);
+
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index bb31212..4d69688 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4660,6 +4660,20 @@ static u32 hclge_get_fw_version(struct hnae3_handle *handle)
 	return hdev->fw_version;
 }
 
+static void hclge_get_flowctrl_adv(struct hnae3_handle *handle,
+				   u32 *flowctrl_adv)
+{
+	struct hclge_vport *vport = hclge_get_vport(handle);
+	struct hclge_dev *hdev = vport->back;
+	struct phy_device *phydev = hdev->hw.mac.phydev;
+
+	if (!phydev)
+		return;
+
+	*flowctrl_adv |= (phydev->advertising & ADVERTISED_Pause) |
+			 (phydev->advertising & ADVERTISED_Asym_Pause);
+}
+
 static void hclge_set_flowctrl_adv(struct hclge_dev *hdev, u32 rx_en, u32 tx_en)
 {
 	struct phy_device *phydev = hdev->hw.mac.phydev;
@@ -5478,6 +5492,7 @@ static int hclge_set_channels(struct hnae3_handle *handle, u32 new_tqps_num)
 	.get_tqps_and_rss_info = hclge_get_tqps_and_rss_info,
 	.set_channels = hclge_set_channels,
 	.get_channels = hclge_get_channels,
+	.get_flowctrl_adv = hclge_get_flowctrl_adv,
 };
 
 static struct hnae3_ae_algo ae_algo = {
-- 
1.9.1

[PATCH V3 net-next 16/17] net: hns3: Increase the default depth of bucket for TM shaper

[Lipeng]

Burstiness of a flow is determined by the depth of a bucket, When the
upper rate of shaper is large, the current depth of a bucket is not
enough.

The default upper rate of shaper is 100G, so increase the depth of
a bucket according to UM.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 7cfe1eb..ea9355d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -23,8 +23,8 @@ enum hclge_shaper_level {
 	HCLGE_SHAPER_LVL_PF	= 1,
 };
 
-#define HCLGE_SHAPER_BS_U_DEF	1
-#define HCLGE_SHAPER_BS_S_DEF	4
+#define HCLGE_SHAPER_BS_U_DEF	5
+#define HCLGE_SHAPER_BS_S_DEF	20
 
 #define HCLGE_ETHER_MAX_RATE	100000
 
-- 
1.9.1

[PATCH V3 net-next 17/17] net: hns3: change TM sched mode to TC-based mode when SRIOV enabled

[Lipeng]

TC-based sched mode supports SRIOV enabled and SRIOV disabled. This
patch change the TM sched mode to TC-based mode in initialization
process.

Fixes: cc9bb43ab394 ("net: hns3: Add tc-based TM support for sriov enabled port")
Signed-off-by: Lipeng <lipeng321@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 4d69688..0874acf 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1100,10 +1100,7 @@ static int hclge_configure(struct hclge_dev *hdev)
 	for (i = 0; i < hdev->tm_info.num_tc; i++)
 		hnae_set_bit(hdev->hw_tc_map, i, 1);
 
-	if (!hdev->num_vmdq_vport && !hdev->num_req_vfs)
-		hdev->tx_sch_mode = HCLGE_FLAG_TC_BASE_SCH_MODE;
-	else
-		hdev->tx_sch_mode = HCLGE_FLAG_VNET_BASE_SCH_MODE;
+	hdev->tx_sch_mode = HCLGE_FLAG_TC_BASE_SCH_MODE;
 
 	return ret;
 }
-- 
1.9.1

Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[David Miller]

From: Lipeng <lipeng321@huawei.com>
Date: Wed, 20 Dec 2017 16:43:02 +0800

> This patchset adds some new feature support and fixes some bugs:
> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
> through ethtool -L/l command, and also fix some related bugs for
> change tqp number.
> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
> for pf, and fix some related bugs.
> [patch 10/17 - 11/17] fix bugs for auto negotiation.
> [patch 12/17] adds support for ethtool command set_pauseparam.
> [patch 13/17 - 14/17] add support to update flow control settings after
> autoneg.
> [patch 15/17 - 17/17] fix some other bugs in net-next.

In your From: email field, as well as you and your colleagues signoffs
you are not using your full, real, name:

====================
From: Lipeng <lipeng321@huawei.com>
====================
Signed-off-by: qumingguang <qumingguang@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
====================

Please fix this.

Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[lipeng (Y)]

On 2017/12/21 3:28, David Miller wrote:
> From: Lipeng <lipeng321@huawei.com>
> Date: Wed, 20 Dec 2017 16:43:02 +0800
>
>> This patchset adds some new feature support and fixes some bugs:
>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>> through ethtool -L/l command, and also fix some related bugs for
>> change tqp number.
>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>> for pf, and fix some related bugs.
>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>> [patch 12/17] adds support for ethtool command set_pauseparam.
>> [patch 13/17 - 14/17] add support to update flow control settings after
>> autoneg.
>> [patch 15/17 - 17/17] fix some other bugs in net-next.
> In your From: email field, as well as you and your colleagues signoffs
> you are not using your full, real, name:
> ====================
> From: Lipeng <lipeng321@huawei.com>

My first name is 'Peng' and Surname is 'Li'.
But it is usually spelled as 'Lipeng' in one go when referring.
This is quite usual convention with full names originating from
China. Surnames comes first, followed by the first name and they
both are inseparable while they are written as well.
"Lipeng" is my full real name,  and my sign-off's appear like above.


Thanks,
Lipeng

> ====================
> Signed-off-by: qumingguang <qumingguang@huawei.com>
> Signed-off-by: Lipeng <lipeng321@huawei.com>
> ====================
>
> Please fix this.
>
> .
>

Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[David Miller]

From: "lipeng (Y)" <lipeng321@huawei.com>
Date: Thu, 21 Dec 2017 09:30:01 +0800

> 
> 
> On 2017/12/21 3:28, David Miller wrote:
>> From: Lipeng <lipeng321@huawei.com>
>> Date: Wed, 20 Dec 2017 16:43:02 +0800
>>
>>> This patchset adds some new feature support and fixes some bugs:
>>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>>> through ethtool -L/l command, and also fix some related bugs for
>>> change tqp number.
>>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>>> for pf, and fix some related bugs.
>>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>>> [patch 12/17] adds support for ethtool command set_pauseparam.
>>> [patch 13/17 - 14/17] add support to update flow control settings
>>> after
>>> autoneg.
>>> [patch 15/17 - 17/17] fix some other bugs in net-next.
>> In your From: email field, as well as you and your colleagues signoffs
>> you are not using your full, real, name:
>> ====================
>> From: Lipeng <lipeng321@huawei.com>
> 
> My first name is 'Peng' and Surname is 'Li'.
> But it is usually spelled as 'Lipeng' in one go when referring.
> This is quite usual convention with full names originating from
> China. Surnames comes first, followed by the first name and they
> both are inseparable while they are written as well.
> "Lipeng" is my full real name,  and my sign-off's appear like above.

The same applies to "qumingguang"?  Why is it not capitalized?
It seems to just be a copy of the email address username.

Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[lipeng (Y)]

On 2017/12/21 12:04, David Miller wrote:
> From: "lipeng (Y)" <lipeng321@huawei.com>
> Date: Thu, 21 Dec 2017 09:30:01 +0800
>
>>
>> On 2017/12/21 3:28, David Miller wrote:
>>> From: Lipeng <lipeng321@huawei.com>
>>> Date: Wed, 20 Dec 2017 16:43:02 +0800
>>>
>>>> This patchset adds some new feature support and fixes some bugs:
>>>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>>>> through ethtool -L/l command, and also fix some related bugs for
>>>> change tqp number.
>>>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>>>> for pf, and fix some related bugs.
>>>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>>>> [patch 12/17] adds support for ethtool command set_pauseparam.
>>>> [patch 13/17 - 14/17] add support to update flow control settings
>>>> after
>>>> autoneg.
>>>> [patch 15/17 - 17/17] fix some other bugs in net-next.
>>> In your From: email field, as well as you and your colleagues signoffs
>>> you are not using your full, real, name:
>>> ====================
>>> From: Lipeng <lipeng321@huawei.com>
>> My first name is 'Peng' and Surname is 'Li'.
>> But it is usually spelled as 'Lipeng' in one go when referring.
>> This is quite usual convention with full names originating from
>> China. Surnames comes first, followed by the first name and they
>> both are inseparable while they are written as well.
>> "Lipeng" is my full real name,  and my sign-off's appear like above.
> The same applies to "qumingguang"?  Why is it not capitalized?
> It seems to just be a copy of the email address username.

have checked with him, and will fix his name spelling to  "Mingguang Qu".

Thanks
Lipeng

> .
>

Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[David Miller]

From: "lipeng (Y)" <lipeng321@huawei.com>
Date: Thu, 21 Dec 2017 14:57:02 +0800

> have checked with him, and will fix his name spelling to "Mingguang
> Qu".

So now all of your colleagues will use "Familyname Surname" or
"Surname Familyname" format, yet you will stick with this
"Familynamesurname" one word thing?

What we are looking for is consistency.

I understand the ordering in asian languages is opposite to western, I
see it all the time in Korea and elsewhere, it is nothing new to me.

But this desire to use a single word to contain both the surname and
the familyname is not what should be done when your asian names are
romanized.

I don't see this practice generally done by other Chinese developers.
So please use "Li Peng" or "Peng Li", whichever you prefer, but be
consistent with your colleagues and other's of your culture who submit
kernel changes.

Thank you.

Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[lipeng (Y)]

On 2017/12/21 3:28, David Miller wrote:
> From: Lipeng <lipeng321@huawei.com>
> Date: Wed, 20 Dec 2017 16:43:02 +0800
>
>> This patchset adds some new feature support and fixes some bugs:
>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>> through ethtool -L/l command, and also fix some related bugs for
>> change tqp number.
>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>> for pf, and fix some related bugs.
>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>> [patch 12/17] adds support for ethtool command set_pauseparam.
>> [patch 13/17 - 14/17] add support to update flow control settings after
>> autoneg.
>> [patch 15/17 - 17/17] fix some other bugs in net-next.
> In your From: email field, as well as you and your colleagues signoffs
> you are not using your full, real, name:
>
> ====================
> From: Lipeng <lipeng321@huawei.com>

My first name is 'Peng' and Surname is 'Li'.
But it is usually spelled as 'Lipeng' in one go when referring.
This is quite usual convention with full names originating from
China. Surnames comes first, followed by the first name and they
both are inseparable while they are written as well.
"Lipeng" is my full real name,  and my sign-off's appear like above.


The name "lipeng"  is very common in china, many guys in HuaWei have the
same name "lipeng",
So my email is lipeng321@huawei.com,  to Distinguish from others.

other guys who named "lipeng" in huawei ,  their email have an id too,
such as lipengxxx@huawei.com.

Wish the explanation is clear.

Thanks,
Lipeng


> ====================
> Signed-off-by: qumingguang <qumingguang@huawei.com>
> Signed-off-by: Lipeng <lipeng321@huawei.com>
> ====================
>
> Please fix this.
>
> .
>

Re: [PATCH V3 net-next 00/17] add some features and fix some bugs for HNS3 driver

[Hanjun Guo]

On 2017/12/21 10:27, lipeng (Y) wrote:
> 
> 
> On 2017/12/21 3:28, David Miller wrote:
>> From: Lipeng <lipeng321@huawei.com>
>> Date: Wed, 20 Dec 2017 16:43:02 +0800
>>
>>> This patchset adds some new feature support and fixes some bugs:
>>> [Patch 1/17 - 5/17] add the support to modify/query the tqp number
>>> through ethtool -L/l command, and also fix some related bugs for
>>> change tqp number.
>>> [Patch 6/17 - 9-17] add support vlan tag offload on tx&&rx direction
>>> for pf, and fix some related bugs.
>>> [patch 10/17 - 11/17] fix bugs for auto negotiation.
>>> [patch 12/17] adds support for ethtool command set_pauseparam.
>>> [patch 13/17 - 14/17] add support to update flow control settings after
>>> autoneg.
>>> [patch 15/17 - 17/17] fix some other bugs in net-next.
>> In your From: email field, as well as you and your colleagues signoffs
>> you are not using your full, real, name:
>>
>> ====================
>> From: Lipeng <lipeng321@huawei.com>
> 
> My first name is 'Peng' and Surname is 'Li'.
> But it is usually spelled as 'Lipeng' in one go when referring.
> This is quite usual convention with full names originating from
> China. Surnames comes first, followed by the first name and they
> both are inseparable while they are written as well.
> "Lipeng" is my full real name,  and my sign-off's appear like above.
> 
> 
> The name "lipeng"  is very common in china, many guys in HuaWei have the
> same name "lipeng",
> So my email is lipeng321@huawei.com,  to Distinguish from others.
> 
> other guys who named "lipeng" in huawei ,  their email have an id too,
> such as lipengxxx@huawei.com.
> 
> Wish the explanation is clear.

I think David was expecting two fixes here:

- The first one is that the Author of the patch
  needs to match the first Signed-off-by in
  the patch. In your patches, lots of them show
  that you are the Author but qumingguang is
  in the first Signed-off-by.

- It's better to use first name + last name:
  Peng Li <lipeng321@huawei.com>
  Mingguang Qu <qumingguang@huawei.com>

Thanks
Hanjun