* [PATCH v1 0/2] arm: npcm: Modify NPCM7XX machine code @ 2018-03-15 23:10 ` Tomer Maimon 0 siblings, 0 replies; 23+ messages in thread From: Tomer Maimon @ 2018-03-15 23:10 UTC (permalink / raw) To: arnd, venture, yuenn, brendanhiggins, avifishman70, joel Cc: openbmc, linux-kernel, linux-arm-kernel, Tomer Maimon Addressed patches from: Arnd Bergmann: https://www.spinics.net/lists/arm-kernel/msg639250.html https://www.spinics.net/lists/arm-kernel/msg639249.html Modify the NPCM and NPCM7XX configuration and enable L2 cache in the DT_MACHINE_START. Tomer Maimon (2): arm: npcm: modify configuration for the NPCM7xx BMC. arm: npcm: Enable L2 Cache in NPCM7xx arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- arch/arm/mach-npcm/Makefile | 4 +++- arch/arm/mach-npcm/npcm7xx.c | 2 ++ 3 files changed, 16 insertions(+), 30 deletions(-) -- 2.14.1 ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 0/2] arm: npcm: Modify NPCM7XX machine code @ 2018-03-15 23:10 ` Tomer Maimon 0 siblings, 0 replies; 23+ messages in thread From: Tomer Maimon @ 2018-03-15 23:10 UTC (permalink / raw) To: linux-arm-kernel Addressed patches from: Arnd Bergmann: https://www.spinics.net/lists/arm-kernel/msg639250.html https://www.spinics.net/lists/arm-kernel/msg639249.html Modify the NPCM and NPCM7XX configuration and enable L2 cache in the DT_MACHINE_START. Tomer Maimon (2): arm: npcm: modify configuration for the NPCM7xx BMC. arm: npcm: Enable L2 Cache in NPCM7xx arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- arch/arm/mach-npcm/Makefile | 4 +++- arch/arm/mach-npcm/npcm7xx.c | 2 ++ 3 files changed, 16 insertions(+), 30 deletions(-) -- 2.14.1 ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. 2018-03-15 23:10 ` Tomer Maimon @ 2018-03-15 23:10 ` Tomer Maimon -1 siblings, 0 replies; 23+ messages in thread From: Tomer Maimon @ 2018-03-15 23:10 UTC (permalink / raw) To: arnd, venture, yuenn, brendanhiggins, avifishman70, joel Cc: openbmc, linux-kernel, linux-arm-kernel, Tomer Maimon Modify configuration and MakeFile for the Nuvoton NPCM and NPCM7xx BMC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- arch/arm/mach-npcm/Makefile | 4 +++- 2 files changed, 14 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig index 6ff9df2636be..684c9c9a32bd 100644 --- a/arch/arm/mach-npcm/Kconfig +++ b/arch/arm/mach-npcm/Kconfig @@ -1,48 +1,30 @@ menuconfig ARCH_NPCM bool "Nuvoton NPCM Architecture" - select ARCH_REQUIRE_GPIOLIB - select USE_OF + depends on ARCH_MULTI_V7 select PINCTRL - select PINCTRL_NPCM7XX if ARCH_NPCM -comment "NPCM7XX CPU type" - -config ARCH_NPCM750 - depends on ARCH_NPCM && ARCH_MULTI_V7 - bool "Support for NPCM750 BMC CPU (Poleg)" +config ARCH_NPCM7XX + bool "Support for NPCM7xx BMC (Poleg)" + depends on ARCH_MULTI_V7 + select PINCTRL_NPCM7XX + select NPCM7XX_TIMER + select ARCH_REQUIRE_GPIOLIB select CACHE_L2X0 - select CPU_V7 select ARM_GIC - select HAVE_SMP - select SMP - select SMP_ON_UP - select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP + select HAVE_ARM_SCU if SMP + select ARM_ERRATA_764369 if SMP select ARM_ERRATA_720789 select ARM_ERRATA_754322 - select ARM_ERRATA_764369 select ARM_ERRATA_794072 select PL310_ERRATA_588369 select PL310_ERRATA_727915 - select USB_EHCI_ROOT_HUB_TT - select USB_ARCH_HAS_HCD - select USB_ARCH_HAS_EHCI - select USB_EHCI_HCD - select USB_ARCH_HAS_OHCI - select USB_OHCI_HCD - select USB - select FIQ - select CPU_USE_DOMAINS - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select COMMON_CLK if OF - select NPCM750_TIMER select MFD_SYSCON help - Support for NPCM750 BMC CPU (Poleg). + General support for NPCM7xx BMC (Poleg). - Nuvoton NPCM750 BMC based on the Cortex A9. + Nuvoton NPCM7xx BMC based on the Cortex A9. endif diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile index c7a1316d27c1..0839e8926a84 100644 --- a/arch/arm/mach-npcm/Makefile +++ b/arch/arm/mach-npcm/Makefile @@ -1,3 +1,5 @@ AFLAGS_headsmp.o += -march=armv7-a -obj-$(CONFIG_ARCH_NPCM750) += npcm7xx.o platsmp.o headsmp.o +obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o + -- 2.14.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. @ 2018-03-15 23:10 ` Tomer Maimon 0 siblings, 0 replies; 23+ messages in thread From: Tomer Maimon @ 2018-03-15 23:10 UTC (permalink / raw) To: linux-arm-kernel Modify configuration and MakeFile for the Nuvoton NPCM and NPCM7xx BMC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- arch/arm/mach-npcm/Makefile | 4 +++- 2 files changed, 14 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig index 6ff9df2636be..684c9c9a32bd 100644 --- a/arch/arm/mach-npcm/Kconfig +++ b/arch/arm/mach-npcm/Kconfig @@ -1,48 +1,30 @@ menuconfig ARCH_NPCM bool "Nuvoton NPCM Architecture" - select ARCH_REQUIRE_GPIOLIB - select USE_OF + depends on ARCH_MULTI_V7 select PINCTRL - select PINCTRL_NPCM7XX if ARCH_NPCM -comment "NPCM7XX CPU type" - -config ARCH_NPCM750 - depends on ARCH_NPCM && ARCH_MULTI_V7 - bool "Support for NPCM750 BMC CPU (Poleg)" +config ARCH_NPCM7XX + bool "Support for NPCM7xx BMC (Poleg)" + depends on ARCH_MULTI_V7 + select PINCTRL_NPCM7XX + select NPCM7XX_TIMER + select ARCH_REQUIRE_GPIOLIB select CACHE_L2X0 - select CPU_V7 select ARM_GIC - select HAVE_SMP - select SMP - select SMP_ON_UP - select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP + select HAVE_ARM_SCU if SMP + select ARM_ERRATA_764369 if SMP select ARM_ERRATA_720789 select ARM_ERRATA_754322 - select ARM_ERRATA_764369 select ARM_ERRATA_794072 select PL310_ERRATA_588369 select PL310_ERRATA_727915 - select USB_EHCI_ROOT_HUB_TT - select USB_ARCH_HAS_HCD - select USB_ARCH_HAS_EHCI - select USB_EHCI_HCD - select USB_ARCH_HAS_OHCI - select USB_OHCI_HCD - select USB - select FIQ - select CPU_USE_DOMAINS - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select COMMON_CLK if OF - select NPCM750_TIMER select MFD_SYSCON help - Support for NPCM750 BMC CPU (Poleg). + General support for NPCM7xx BMC (Poleg). - Nuvoton NPCM750 BMC based on the Cortex A9. + Nuvoton NPCM7xx BMC based on the Cortex A9. endif diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile index c7a1316d27c1..0839e8926a84 100644 --- a/arch/arm/mach-npcm/Makefile +++ b/arch/arm/mach-npcm/Makefile @@ -1,3 +1,5 @@ AFLAGS_headsmp.o += -march=armv7-a -obj-$(CONFIG_ARCH_NPCM750) += npcm7xx.o platsmp.o headsmp.o +obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o + -- 2.14.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. 2018-03-15 23:10 ` Tomer Maimon (?) @ 2018-03-16 5:56 ` Brendan Higgins -1 siblings, 0 replies; 23+ messages in thread From: Brendan Higgins @ 2018-03-16 5:56 UTC (permalink / raw) To: Tomer Maimon Cc: Arnd Bergmann, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > Modify configuration and MakeFile > for the Nuvoton NPCM and NPCM7xx BMC. > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- > arch/arm/mach-npcm/Makefile | 4 +++- > 2 files changed, 14 insertions(+), 30 deletions(-) <snip> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. @ 2018-03-16 5:56 ` Brendan Higgins 0 siblings, 0 replies; 23+ messages in thread From: Brendan Higgins @ 2018-03-16 5:56 UTC (permalink / raw) To: linux-arm-kernel On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > Modify configuration and MakeFile > for the Nuvoton NPCM and NPCM7xx BMC. > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- > arch/arm/mach-npcm/Makefile | 4 +++- > 2 files changed, 14 insertions(+), 30 deletions(-) <snip> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. @ 2018-03-16 5:56 ` Brendan Higgins 0 siblings, 0 replies; 23+ messages in thread From: Brendan Higgins @ 2018-03-16 5:56 UTC (permalink / raw) To: Tomer Maimon Cc: Arnd Bergmann, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > Modify configuration and MakeFile > for the Nuvoton NPCM and NPCM7xx BMC. > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- > arch/arm/mach-npcm/Makefile | 4 +++- > 2 files changed, 14 insertions(+), 30 deletions(-) <snip> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. 2018-03-16 5:56 ` Brendan Higgins (?) @ 2018-04-05 12:51 ` Arnd Bergmann -1 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 12:51 UTC (permalink / raw) To: Brendan Higgins Cc: Tomer Maimon, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Fri, Mar 16, 2018 at 6:56 AM, Brendan Higgins <brendanhiggins@google.com> wrote: > On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > >> Modify configuration and MakeFile >> for the Nuvoton NPCM and NPCM7xx BMC. > >> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> >> --- >> arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- >> arch/arm/mach-npcm/Makefile | 4 +++- >> 2 files changed, 14 insertions(+), 30 deletions(-) > > <snip> > > Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Sorry for missing this earlier, I did ask for the rework but then didn't see it as it wasn't in my arm@kernel.org inbox. Tomer, please make sure that all patches you want to have included in the kernel are sent to that address, while patches you want to have reviewed are not sent to it. Normally I don't apply patches during the merge window, but this one fixes some build problems, so I've decided to take it. Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. @ 2018-04-05 12:51 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 12:51 UTC (permalink / raw) To: linux-arm-kernel On Fri, Mar 16, 2018 at 6:56 AM, Brendan Higgins <brendanhiggins@google.com> wrote: > On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > >> Modify configuration and MakeFile >> for the Nuvoton NPCM and NPCM7xx BMC. > >> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> >> --- >> arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- >> arch/arm/mach-npcm/Makefile | 4 +++- >> 2 files changed, 14 insertions(+), 30 deletions(-) > > <snip> > > Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Sorry for missing this earlier, I did ask for the rework but then didn't see it as it wasn't in my arm at kernel.org inbox. Tomer, please make sure that all patches you want to have included in the kernel are sent to that address, while patches you want to have reviewed are not sent to it. Normally I don't apply patches during the merge window, but this one fixes some build problems, so I've decided to take it. Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC. @ 2018-04-05 12:51 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 12:51 UTC (permalink / raw) To: Brendan Higgins Cc: Tomer Maimon, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Fri, Mar 16, 2018 at 6:56 AM, Brendan Higgins <brendanhiggins@google.com> wrote: > On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > >> Modify configuration and MakeFile >> for the Nuvoton NPCM and NPCM7xx BMC. > >> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> >> --- >> arch/arm/mach-npcm/Kconfig | 40 +++++++++++----------------------------- >> arch/arm/mach-npcm/Makefile | 4 +++- >> 2 files changed, 14 insertions(+), 30 deletions(-) > > <snip> > > Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Sorry for missing this earlier, I did ask for the rework but then didn't see it as it wasn't in my arm@kernel.org inbox. Tomer, please make sure that all patches you want to have included in the kernel are sent to that address, while patches you want to have reviewed are not sent to it. Normally I don't apply patches during the merge window, but this one fixes some build problems, so I've decided to take it. Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx 2018-03-15 23:10 ` Tomer Maimon @ 2018-03-15 23:10 ` Tomer Maimon -1 siblings, 0 replies; 23+ messages in thread From: Tomer Maimon @ 2018-03-15 23:10 UTC (permalink / raw) To: arnd, venture, yuenn, brendanhiggins, avifishman70, joel Cc: openbmc, linux-kernel, linux-arm-kernel, Tomer Maimon Enable L2 Cache in Nuvoton NPCM7xx BMC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- arch/arm/mach-npcm/npcm7xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c index 5f7cd88103ef..c5f77d854c4f 100644 --- a/arch/arm/mach-npcm/npcm7xx.c +++ b/arch/arm/mach-npcm/npcm7xx.c @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") .atag_offset = 0x100, .dt_compat = npcm7xx_dt_match, + .l2c_aux_val = 0x0, + .l2c_aux_mask = ~0x0, MACHINE_END -- 2.14.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx @ 2018-03-15 23:10 ` Tomer Maimon 0 siblings, 0 replies; 23+ messages in thread From: Tomer Maimon @ 2018-03-15 23:10 UTC (permalink / raw) To: linux-arm-kernel Enable L2 Cache in Nuvoton NPCM7xx BMC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- arch/arm/mach-npcm/npcm7xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c index 5f7cd88103ef..c5f77d854c4f 100644 --- a/arch/arm/mach-npcm/npcm7xx.c +++ b/arch/arm/mach-npcm/npcm7xx.c @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") .atag_offset = 0x100, .dt_compat = npcm7xx_dt_match, + .l2c_aux_val = 0x0, + .l2c_aux_mask = ~0x0, MACHINE_END -- 2.14.1 ^ permalink raw reply related [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx 2018-03-15 23:10 ` Tomer Maimon (?) @ 2018-03-16 5:52 ` Brendan Higgins -1 siblings, 0 replies; 23+ messages in thread From: Brendan Higgins @ 2018-03-16 5:52 UTC (permalink / raw) To: Tomer Maimon Cc: Arnd Bergmann, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > Enable L2 Cache in Nuvoton NPCM7xx BMC. > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > arch/arm/mach-npcm/npcm7xx.c | 2 ++ > 1 file changed, 2 insertions(+) > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c > index 5f7cd88103ef..c5f77d854c4f 100644 > --- a/arch/arm/mach-npcm/npcm7xx.c > +++ b/arch/arm/mach-npcm/npcm7xx.c > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") > .atag_offset = 0x100, > .dt_compat = npcm7xx_dt_match, > + .l2c_aux_val = 0x0, > + .l2c_aux_mask = ~0x0, You need to limit this to the specific bit(s) you want to set and verify that the l2c driver does not already manage that bit appropriately and that it can not be specified via the dtsi. We discussed this a little while ago with Rob here: https://www.spinics.net/lists/arm-kernel/msg613372.html > MACHINE_END > -- > 2.14.1 Cheers ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx @ 2018-03-16 5:52 ` Brendan Higgins 0 siblings, 0 replies; 23+ messages in thread From: Brendan Higgins @ 2018-03-16 5:52 UTC (permalink / raw) To: linux-arm-kernel On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > Enable L2 Cache in Nuvoton NPCM7xx BMC. > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > arch/arm/mach-npcm/npcm7xx.c | 2 ++ > 1 file changed, 2 insertions(+) > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c > index 5f7cd88103ef..c5f77d854c4f 100644 > --- a/arch/arm/mach-npcm/npcm7xx.c > +++ b/arch/arm/mach-npcm/npcm7xx.c > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") > .atag_offset = 0x100, > .dt_compat = npcm7xx_dt_match, > + .l2c_aux_val = 0x0, > + .l2c_aux_mask = ~0x0, You need to limit this to the specific bit(s) you want to set and verify that the l2c driver does not already manage that bit appropriately and that it can not be specified via the dtsi. We discussed this a little while ago with Rob here: https://www.spinics.net/lists/arm-kernel/msg613372.html > MACHINE_END > -- > 2.14.1 Cheers ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx @ 2018-03-16 5:52 ` Brendan Higgins 0 siblings, 0 replies; 23+ messages in thread From: Brendan Higgins @ 2018-03-16 5:52 UTC (permalink / raw) To: Tomer Maimon Cc: Arnd Bergmann, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > Enable L2 Cache in Nuvoton NPCM7xx BMC. > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > arch/arm/mach-npcm/npcm7xx.c | 2 ++ > 1 file changed, 2 insertions(+) > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c > index 5f7cd88103ef..c5f77d854c4f 100644 > --- a/arch/arm/mach-npcm/npcm7xx.c > +++ b/arch/arm/mach-npcm/npcm7xx.c > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") > .atag_offset = 0x100, > .dt_compat = npcm7xx_dt_match, > + .l2c_aux_val = 0x0, > + .l2c_aux_mask = ~0x0, You need to limit this to the specific bit(s) you want to set and verify that the l2c driver does not already manage that bit appropriately and that it can not be specified via the dtsi. We discussed this a little while ago with Rob here: https://www.spinics.net/lists/arm-kernel/msg613372.html > MACHINE_END > -- > 2.14.1 Cheers ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx 2018-03-16 5:52 ` Brendan Higgins (?) (?) @ 2018-03-16 21:51 ` Tomer Maimon 2018-04-05 12:54 ` Arnd Bergmann -1 siblings, 1 reply; 23+ messages in thread From: Tomer Maimon @ 2018-03-16 21:51 UTC (permalink / raw) To: Brendan Higgins Cc: Arnd Bergmann, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen [-- Attachment #1: Type: text/plain, Size: 1578 bytes --] On 16 March 2018 at 07:52, Brendan Higgins <brendanhiggins@google.com> wrote: > On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: > > > Enable L2 Cache in Nuvoton NPCM7xx BMC. > > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > > --- > > arch/arm/mach-npcm/npcm7xx.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c > > index 5f7cd88103ef..c5f77d854c4f 100644 > > --- a/arch/arm/mach-npcm/npcm7xx.c > > +++ b/arch/arm/mach-npcm/npcm7xx.c > > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { > > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") > > .atag_offset = 0x100, > > .dt_compat = npcm7xx_dt_match, > > + .l2c_aux_val = 0x0, > > + .l2c_aux_mask = ~0x0, > > You need to limit this to the specific bit(s) you want to set and verify > that > the l2c driver does not already manage that bit appropriately and that it > can > not be specified via the dtsi. > Do you mean that I need to specify it the same as been done in V7? because when I run with the above l2c_aux_val and l2c_aux_mask parameters I get the same result. Also if I am not adding the l2c_aux_val and l2c_aux_mask parameters to the DT_MACHINE_START the L2C cache does not initialize. > > We discussed this a little while ago with Rob here: > https://www.spinics.net/lists/arm-kernel/msg613372.html Sorry in this link I see only Russel king comment regarding the L2C > > > > MACHINE_END > > -- > > 2.14.1 > > > Cheers > Cheers [-- Attachment #2: Type: text/html, Size: 5562 bytes --] ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx 2018-03-16 21:51 ` Tomer Maimon 2018-04-05 12:54 ` Arnd Bergmann @ 2018-04-05 12:54 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 12:54 UTC (permalink / raw) To: Tomer Maimon Cc: Brendan Higgins, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Fri, Mar 16, 2018 at 10:51 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > On 16 March 2018 at 07:52, Brendan Higgins <brendanhiggins@google.com> > wrote: >> >> On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: >> >> > Enable L2 Cache in Nuvoton NPCM7xx BMC. >> >> > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> >> > --- >> > arch/arm/mach-npcm/npcm7xx.c | 2 ++ >> > 1 file changed, 2 insertions(+) >> >> > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c >> > index 5f7cd88103ef..c5f77d854c4f 100644 >> > --- a/arch/arm/mach-npcm/npcm7xx.c >> > +++ b/arch/arm/mach-npcm/npcm7xx.c >> > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { >> > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") >> > .atag_offset = 0x100, >> > .dt_compat = npcm7xx_dt_match, >> > + .l2c_aux_val = 0x0, >> > + .l2c_aux_mask = ~0x0, >> >> You need to limit this to the specific bit(s) you want to set and verify >> that >> the l2c driver does not already manage that bit appropriately and that it >> can >> not be specified via the dtsi. > > > Do you mean that I need to specify it the same as been done in V7? > because when I run with the above l2c_aux_val and l2c_aux_mask parameters I > get the same result. > > Also if I am not adding the l2c_aux_val and l2c_aux_mask parameters to the > DT_MACHINE_START > the L2C cache does not initialize. >> >> >> We discussed this a little while ago with Rob here: >> https://www.spinics.net/lists/arm-kernel/msg613372.html > > > Sorry in this link I see only Russel king comment regarding the L2C I'm not sure what the outcome is, and the patch changelog doesn't explain what the patch is for, so I've not applied it. If you need the patch for correct operation, please resend it with a proper changelog comment explaining why it's needed and why you ended up not setting any of the bits. The last email in that thread mentions L310_AUX_CTRL_CACHE_REPLACE_RR, is that required after all? Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx @ 2018-04-05 12:54 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 12:54 UTC (permalink / raw) To: linux-arm-kernel On Fri, Mar 16, 2018 at 10:51 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > On 16 March 2018 at 07:52, Brendan Higgins <brendanhiggins@google.com> > wrote: >> >> On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: >> >> > Enable L2 Cache in Nuvoton NPCM7xx BMC. >> >> > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> >> > --- >> > arch/arm/mach-npcm/npcm7xx.c | 2 ++ >> > 1 file changed, 2 insertions(+) >> >> > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c >> > index 5f7cd88103ef..c5f77d854c4f 100644 >> > --- a/arch/arm/mach-npcm/npcm7xx.c >> > +++ b/arch/arm/mach-npcm/npcm7xx.c >> > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { >> > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") >> > .atag_offset = 0x100, >> > .dt_compat = npcm7xx_dt_match, >> > + .l2c_aux_val = 0x0, >> > + .l2c_aux_mask = ~0x0, >> >> You need to limit this to the specific bit(s) you want to set and verify >> that >> the l2c driver does not already manage that bit appropriately and that it >> can >> not be specified via the dtsi. > > > Do you mean that I need to specify it the same as been done in V7? > because when I run with the above l2c_aux_val and l2c_aux_mask parameters I > get the same result. > > Also if I am not adding the l2c_aux_val and l2c_aux_mask parameters to the > DT_MACHINE_START > the L2C cache does not initialize. >> >> >> We discussed this a little while ago with Rob here: >> https://www.spinics.net/lists/arm-kernel/msg613372.html > > > Sorry in this link I see only Russel king comment regarding the L2C I'm not sure what the outcome is, and the patch changelog doesn't explain what the patch is for, so I've not applied it. If you need the patch for correct operation, please resend it with a proper changelog comment explaining why it's needed and why you ended up not setting any of the bits. The last email in that thread mentions L310_AUX_CTRL_CACHE_REPLACE_RR, is that required after all? Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx @ 2018-04-05 12:54 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 12:54 UTC (permalink / raw) To: Tomer Maimon Cc: Brendan Higgins, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Fri, Mar 16, 2018 at 10:51 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > > > On 16 March 2018 at 07:52, Brendan Higgins <brendanhiggins@google.com> > wrote: >> >> On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> wrote: >> >> > Enable L2 Cache in Nuvoton NPCM7xx BMC. >> >> > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> >> > --- >> > arch/arm/mach-npcm/npcm7xx.c | 2 ++ >> > 1 file changed, 2 insertions(+) >> >> > diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c >> > index 5f7cd88103ef..c5f77d854c4f 100644 >> > --- a/arch/arm/mach-npcm/npcm7xx.c >> > +++ b/arch/arm/mach-npcm/npcm7xx.c >> > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { >> > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") >> > .atag_offset = 0x100, >> > .dt_compat = npcm7xx_dt_match, >> > + .l2c_aux_val = 0x0, >> > + .l2c_aux_mask = ~0x0, >> >> You need to limit this to the specific bit(s) you want to set and verify >> that >> the l2c driver does not already manage that bit appropriately and that it >> can >> not be specified via the dtsi. > > > Do you mean that I need to specify it the same as been done in V7? > because when I run with the above l2c_aux_val and l2c_aux_mask parameters I > get the same result. > > Also if I am not adding the l2c_aux_val and l2c_aux_mask parameters to the > DT_MACHINE_START > the L2C cache does not initialize. >> >> >> We discussed this a little while ago with Rob here: >> https://www.spinics.net/lists/arm-kernel/msg613372.html > > > Sorry in this link I see only Russel king comment regarding the L2C I'm not sure what the outcome is, and the patch changelog doesn't explain what the patch is for, so I've not applied it. If you need the patch for correct operation, please resend it with a proper changelog comment explaining why it's needed and why you ended up not setting any of the bits. The last email in that thread mentions L310_AUX_CTRL_CACHE_REPLACE_RR, is that required after all? Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx 2018-04-05 12:54 ` Arnd Bergmann (?) (?) @ 2018-04-05 16:56 ` Tomer Maimon 2018-04-05 20:42 ` Arnd Bergmann -1 siblings, 1 reply; 23+ messages in thread From: Tomer Maimon @ 2018-04-05 16:56 UTC (permalink / raw) To: Arnd Bergmann Cc: Brendan Higgins, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen [-- Attachment #1: Type: text/plain, Size: 2532 bytes --] On 5 April 2018 at 15:54, Arnd Bergmann <arnd@arndb.de> wrote: > On Fri, Mar 16, 2018 at 10:51 PM, Tomer Maimon <tmaimon77@gmail.com> > wrote: > > > > > > On 16 March 2018 at 07:52, Brendan Higgins <brendanhiggins@google.com> > > wrote: > >> > >> On Thu, Mar 15, 2018 at 4:16 PM Tomer Maimon <tmaimon77@gmail.com> > wrote: > >> > >> > Enable L2 Cache in Nuvoton NPCM7xx BMC. > >> > >> > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > >> > --- > >> > arch/arm/mach-npcm/npcm7xx.c | 2 ++ > >> > 1 file changed, 2 insertions(+) > >> > >> > diff --git a/arch/arm/mach-npcm/npcm7xx.c > b/arch/arm/mach-npcm/npcm7xx.c > >> > index 5f7cd88103ef..c5f77d854c4f 100644 > >> > --- a/arch/arm/mach-npcm/npcm7xx.c > >> > +++ b/arch/arm/mach-npcm/npcm7xx.c > >> > @@ -17,4 +17,6 @@ static const char *const npcm7xx_dt_match[] = { > >> > DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family") > >> > .atag_offset = 0x100, > >> > .dt_compat = npcm7xx_dt_match, > >> > + .l2c_aux_val = 0x0, > >> > + .l2c_aux_mask = ~0x0, > >> > >> You need to limit this to the specific bit(s) you want to set and verify > >> that > >> the l2c driver does not already manage that bit appropriately and that > it > >> can > >> not be specified via the dtsi. > > > > > > Do you mean that I need to specify it the same as been done in V7? > > because when I run with the above l2c_aux_val and l2c_aux_mask > parameters I > > get the same result. > > > > Also if I am not adding the l2c_aux_val and l2c_aux_mask parameters to > the > > DT_MACHINE_START > > the L2C cache does not initialize. > >> > >> > >> We discussed this a little while ago with Rob here: > >> https://www.spinics.net/lists/arm-kernel/msg613372.html > > > > > > Sorry in this link I see only Russel king comment regarding the L2C > > I'm not sure what the outcome is, and the patch changelog doesn't > explain what the patch is for, so I've not applied it. If you need the > patch for correct operation, please resend it with a proper changelog > comment explaining why it's needed and why you ended up not setting > any of the bits. > Sorry for not explain it better, It seems that I have to add l2c_aux_val, l2c_aux_mask parameters to the DT_MACHINE_START to enable the L2 Cache. > > The last email in that thread mentions > L310_AUX_CTRL_CACHE_REPLACE_RR, is that required after all? > No it is not require this is why I added: .l2c_aux_val = 0x0, .l2c_aux_mask = ~0x0, > > Arnd > Can I resend it on Sunday? Thanks, Tomer [-- Attachment #2: Type: text/html, Size: 5631 bytes --] ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx 2018-04-05 16:56 ` Tomer Maimon 2018-04-05 20:42 ` Arnd Bergmann @ 2018-04-05 20:42 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 20:42 UTC (permalink / raw) To: Tomer Maimon Cc: Brendan Higgins, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Thu, Apr 5, 2018 at 6:56 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > On 5 April 2018 at 15:54, Arnd Bergmann <arnd@arndb.de> wrote: >> On Fri, Mar 16, 2018 at 10:51 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > > It seems that I have to add l2c_aux_val, l2c_aux_mask parameters to the > DT_MACHINE_START > to enable the L2 Cache. >> >> >> The last email in that thread mentions >> L310_AUX_CTRL_CACHE_REPLACE_RR, is that required after all? > > > No it is not require this is why I added: > .l2c_aux_val = 0x0, > .l2c_aux_mask = ~0x0, > > Can I resend it on Sunday? Yes, please resend it as soon as you have the time to improve the changelog, no need to wait if you can do it right away. We can always merge bugfixes, but doing it earlier rather than later is better. Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx @ 2018-04-05 20:42 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 20:42 UTC (permalink / raw) To: linux-arm-kernel On Thu, Apr 5, 2018 at 6:56 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > On 5 April 2018 at 15:54, Arnd Bergmann <arnd@arndb.de> wrote: >> On Fri, Mar 16, 2018 at 10:51 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > > It seems that I have to add l2c_aux_val, l2c_aux_mask parameters to the > DT_MACHINE_START > to enable the L2 Cache. >> >> >> The last email in that thread mentions >> L310_AUX_CTRL_CACHE_REPLACE_RR, is that required after all? > > > No it is not require this is why I added: > .l2c_aux_val = 0x0, > .l2c_aux_mask = ~0x0, > > Can I resend it on Sunday? Yes, please resend it as soon as you have the time to improve the changelog, no need to wait if you can do it right away. We can always merge bugfixes, but doing it earlier rather than later is better. Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
* Re: [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx @ 2018-04-05 20:42 ` Arnd Bergmann 0 siblings, 0 replies; 23+ messages in thread From: Arnd Bergmann @ 2018-04-05 20:42 UTC (permalink / raw) To: Tomer Maimon Cc: Brendan Higgins, Patrick Venture, Avi Fishman, Joel Stanley, OpenBMC Maillist, Linux Kernel Mailing List, Linux ARM, Nancy Yuen On Thu, Apr 5, 2018 at 6:56 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > On 5 April 2018 at 15:54, Arnd Bergmann <arnd@arndb.de> wrote: >> On Fri, Mar 16, 2018 at 10:51 PM, Tomer Maimon <tmaimon77@gmail.com> wrote: > > It seems that I have to add l2c_aux_val, l2c_aux_mask parameters to the > DT_MACHINE_START > to enable the L2 Cache. >> >> >> The last email in that thread mentions >> L310_AUX_CTRL_CACHE_REPLACE_RR, is that required after all? > > > No it is not require this is why I added: > .l2c_aux_val = 0x0, > .l2c_aux_mask = ~0x0, > > Can I resend it on Sunday? Yes, please resend it as soon as you have the time to improve the changelog, no need to wait if you can do it right away. We can always merge bugfixes, but doing it earlier rather than later is better. Arnd ^ permalink raw reply [flat|nested] 23+ messages in thread
end of thread, other threads:[~2018-04-05 20:42 UTC | newest] Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2018-03-15 23:10 [PATCH v1 0/2] arm: npcm: Modify NPCM7XX machine code Tomer Maimon 2018-03-15 23:10 ` Tomer Maimon 2018-03-15 23:10 ` [PATCH v1 1/2] arm: npcm: modify configuration for the NPCM7xx BMC Tomer Maimon 2018-03-15 23:10 ` Tomer Maimon 2018-03-16 5:56 ` Brendan Higgins 2018-03-16 5:56 ` Brendan Higgins 2018-03-16 5:56 ` Brendan Higgins 2018-04-05 12:51 ` Arnd Bergmann 2018-04-05 12:51 ` Arnd Bergmann 2018-04-05 12:51 ` Arnd Bergmann 2018-03-15 23:10 ` [PATCH v1 2/2] arm: npcm: Enable L2 Cache in NPCM7xx Tomer Maimon 2018-03-15 23:10 ` Tomer Maimon 2018-03-16 5:52 ` Brendan Higgins 2018-03-16 5:52 ` Brendan Higgins 2018-03-16 5:52 ` Brendan Higgins 2018-03-16 21:51 ` Tomer Maimon 2018-04-05 12:54 ` Arnd Bergmann 2018-04-05 12:54 ` Arnd Bergmann 2018-04-05 12:54 ` Arnd Bergmann 2018-04-05 16:56 ` Tomer Maimon 2018-04-05 20:42 ` Arnd Bergmann 2018-04-05 20:42 ` Arnd Bergmann 2018-04-05 20:42 ` Arnd Bergmann
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.