[PATCH v3 0/2] SDM845 System Cache Driver

[PATCH v3 0/2] SDM845 System Cache Driver

[Rishabh Bhatnagar]

This series implements system cache or LLCC(Last Level Cache Controller) driver
for SDM845 SOC. The purpose of the driver is to partition the system cache and
program the settings such as priortiy, lines to probe while doing a look up
in the system cache, low power related settings etc. The partitions are called
cache slices. Each cache slice is associated with size and SCID(System Cache ID)
The driver also provides API for clients to query the cache slice details,
activate and deactivate them.

The driver can be broadly classified into:
* SOC specific driver: llcc-sdm845.c: Cache partitioning and cache slice
properties for usecases on sdm845 that need to use system cache.

* API : llcc-slice.c: Exports APIs to clients to query cache slice details,
activate and deactivate cache slices.

Changes since v2:
* Corrected the Makefile to fix compilation.

Changes since v1:
* Added Makefile and Kconfig.

Changes since v0:
* Removed the syscon and simple-mfd approach
* Updated the device tree nodes to mention LLCC as a single HW block
* Moved llcc bank offsets from device tree and handled the offset
  in the driver.

ckadabi@codeaurora.org (2):
  Documentation: Documentation for qcom, llcc
  drivers: soc: Add LLCC driver

 .../devicetree/bindings/arm/msm/qcom,llcc.txt      |  70 ++++
 drivers/soc/qcom/Kconfig                           |  16 +
 drivers/soc/qcom/Makefile                          |   2 +
 drivers/soc/qcom/llcc-sdm845.c                     | 120 ++++++
 drivers/soc/qcom/llcc-slice.c                      | 454 +++++++++++++++++++++
 include/linux/soc/qcom/llcc-qcom.h                 | 178 ++++++++
 6 files changed, 840 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
 create mode 100644 drivers/soc/qcom/llcc-sdm845.c
 create mode 100644 drivers/soc/qcom/llcc-slice.c
 create mode 100644 include/linux/soc/qcom/llcc-qcom.h

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 0/2] SDM845 System Cache Driver

[Rishabh Bhatnagar]

This series implements system cache or LLCC(Last Level Cache Controller) driver
for SDM845 SOC. The purpose of the driver is to partition the system cache and
program the settings such as priortiy, lines to probe while doing a look up
in the system cache, low power related settings etc. The partitions are called
cache slices. Each cache slice is associated with size and SCID(System Cache ID)
The driver also provides API for clients to query the cache slice details,
activate and deactivate them.

The driver can be broadly classified into:
* SOC specific driver: llcc-sdm845.c: Cache partitioning and cache slice
properties for usecases on sdm845 that need to use system cache.

* API : llcc-slice.c: Exports APIs to clients to query cache slice details,
activate and deactivate cache slices.

Changes since v2:
* Corrected the Makefile to fix compilation.

Changes since v1:
* Added Makefile and Kconfig.

Changes since v0:
* Removed the syscon and simple-mfd approach
* Updated the device tree nodes to mention LLCC as a single HW block
* Moved llcc bank offsets from device tree and handled the offset
  in the driver.

ckadabi at codeaurora.org (2):
  Documentation: Documentation for qcom, llcc
  drivers: soc: Add LLCC driver

 .../devicetree/bindings/arm/msm/qcom,llcc.txt      |  70 ++++
 drivers/soc/qcom/Kconfig                           |  16 +
 drivers/soc/qcom/Makefile                          |   2 +
 drivers/soc/qcom/llcc-sdm845.c                     | 120 ++++++
 drivers/soc/qcom/llcc-slice.c                      | 454 +++++++++++++++++++++
 include/linux/soc/qcom/llcc-qcom.h                 | 178 ++++++++
 6 files changed, 840 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
 create mode 100644 drivers/soc/qcom/llcc-sdm845.c
 create mode 100644 drivers/soc/qcom/llcc-slice.c
 create mode 100644 include/linux/soc/qcom/llcc-qcom.h

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 1/2] Documentation: Documentation for qcom, llcc

[Rishabh Bhatnagar]

Documentation for last level cache controller device tree bindings,
client bindings usage examples.

Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 .../devicetree/bindings/arm/msm/qcom,llcc.txt      | 70 ++++++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt

diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
new file mode 100644
index 0000000..ceb20a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -0,0 +1,70 @@
+== Introduction==
+
+LLCC (Last Level Cache Controller) driver is implemented as a platform device.
+The driver Programs the SCT (system configuration table). The SCT programming
+divides the system cache into slices. Each slice is assigned an ID A.K.A
+SCID(Sub-cache ID).
+HW modules that are designated to use the system cache are known as clients.
+Each client must also be represented as a node in the device tree just like
+any other hw module.
+One client can have multiple SCID's assigned meaning each client could get
+multiple slices in the cache. Client can use the slices for various pre-defined
+usecases. Each client defines a set of names for these usecases in its
+device tree binding.
+Client makes a request to LLCC device to get cache-slices properties for each
+of its usecase. Client gets the information like cache slice ID and size of the
+cache slice.
+
+== llcc device ==
+
+Properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sdm855-llcc"
+
+- reg:
+	Usage: required
+	Value Type: <prop-encoded-array>
+	Definition: must be addresses and sizes of the LLCC registers
+
+- #cache-cells:
+	Usage: required
+	Value Type: <u32>
+	Definition: Number of cache cells, must be 1
+
+- max-slices:
+	usage: required
+	Value Type: <u32>
+	Definition: Number of cache slices supported by hardware
+
+Example:
+
+	llcc: qcom,sdm855-llcc@01100000 {
+		compatible = "qcom,sdm845-llcc";
+		reg = <0x01100000 0x250000>;
+		#cache-cells = <1>;
+		max-slices = <32>;
+	};
+
+== Client ==
+
+Required properties:
+- cache-slice-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: A set of names that identify the usecase names of a client that
+			uses cache slice. These strings are used to look up the cache slice
+		    entries by name.
+
+- cache-slices:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: The tuple has phandle to llcc device as the first argument and
+			the second argument is the usecase id of the client.
+For Example:
+
+	venus {
+		cache-slice-names = "vidsc0", "vidsc1";
+		cache-slices = <&llcc 2>, <&llcc 3>;
+	};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 1/2] Documentation: Documentation for qcom, llcc

[Rishabh Bhatnagar]

Documentation for last level cache controller device tree bindings,
client bindings usage examples.

Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 .../devicetree/bindings/arm/msm/qcom,llcc.txt      | 70 ++++++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt

diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
new file mode 100644
index 0000000..ceb20a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
@@ -0,0 +1,70 @@
+== Introduction==
+
+LLCC (Last Level Cache Controller) driver is implemented as a platform device.
+The driver Programs the SCT (system configuration table). The SCT programming
+divides the system cache into slices. Each slice is assigned an ID A.K.A
+SCID(Sub-cache ID).
+HW modules that are designated to use the system cache are known as clients.
+Each client must also be represented as a node in the device tree just like
+any other hw module.
+One client can have multiple SCID's assigned meaning each client could get
+multiple slices in the cache. Client can use the slices for various pre-defined
+usecases. Each client defines a set of names for these usecases in its
+device tree binding.
+Client makes a request to LLCC device to get cache-slices properties for each
+of its usecase. Client gets the information like cache slice ID and size of the
+cache slice.
+
+== llcc device ==
+
+Properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sdm855-llcc"
+
+- reg:
+	Usage: required
+	Value Type: <prop-encoded-array>
+	Definition: must be addresses and sizes of the LLCC registers
+
+- #cache-cells:
+	Usage: required
+	Value Type: <u32>
+	Definition: Number of cache cells, must be 1
+
+- max-slices:
+	usage: required
+	Value Type: <u32>
+	Definition: Number of cache slices supported by hardware
+
+Example:
+
+	llcc: qcom,sdm855-llcc at 01100000 {
+		compatible = "qcom,sdm845-llcc";
+		reg = <0x01100000 0x250000>;
+		#cache-cells = <1>;
+		max-slices = <32>;
+	};
+
+== Client ==
+
+Required properties:
+- cache-slice-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: A set of names that identify the usecase names of a client that
+			uses cache slice. These strings are used to look up the cache slice
+		    entries by name.
+
+- cache-slices:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: The tuple has phandle to llcc device as the first argument and
+			the second argument is the usecase id of the client.
+For Example:
+
+	venus {
+		cache-slice-names = "vidsc0", "vidsc1";
+		cache-slices = <&llcc 2>, <&llcc 3>;
+	};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Rishabh Bhatnagar]

LLCC (Last Level Cache Controller) provides additional cache memory
in the system. LLCC is partitioned into muliple slices and each
slice getting its own priority, size, ID and other config parameters.
LLCC driver programs these parameters for each slice. Clients that
are assigned to use LLCC need to get information such size & ID of the
 slice they get and activate or deactivate the slice as needed. LLCC driver
provides API interfaces for the clients to perform these operations.

Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 drivers/soc/qcom/Kconfig           |  16 ++
 drivers/soc/qcom/Makefile          |   2 +
 drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
 drivers/soc/qcom/llcc-slice.c      | 454 +++++++++++++++++++++++++++++++++++++
 include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
 5 files changed, 770 insertions(+)
 create mode 100644 drivers/soc/qcom/llcc-sdm845.c
 create mode 100644 drivers/soc/qcom/llcc-slice.c
 create mode 100644 include/linux/soc/qcom/llcc-qcom.h

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index e050eb8..28237fc 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -21,6 +21,22 @@ config QCOM_GSBI
           functions for connecting the underlying serial UART, SPI, and I2C
           devices to the output pins.

+config QCOM_LLCC
+	tristate "Qualcomm Technologies, Inc. LLCC driver"
+	depends on ARCH_QCOM
+	help
+	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
+	  Level Cache. This provides interfaces to client's that use the LLCC.
+	  Say yes here to enable LLCC slice driver.
+
+config QCOM_SDM845_LLCC
+	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
+	depends on QCOM_LLCC
+	help
+	  Say yes here to enable the LLCC driver for SDM845. This is provides
+	  data required to configure LLCC so that clients can start using the
+	  LLCC slices.
+
 config QCOM_MDT_LOADER
 	tristate
 	select QCOM_SCM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index dcebf28..e16d6a2 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
 obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
 obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
 obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
+obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c
new file mode 100644
index 0000000..cd431d9
--- /dev/null
+++ b/drivers/soc/qcom/llcc-sdm845.c
@@ -0,0 +1,120 @@
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/llcc-qcom.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+
+/*
+ * SCT entry contains of the following parameters
+ * name: Name of the client's use case for which the llcc slice is used
+ * uid: Unique id for the client's use case
+ * slice_id: llcc slice id for each client
+ * max_cap: The maximum capacity of the cache slice provided in KB
+ * priority: Priority of the client used to select victim line for replacement
+ * fixed_size: Determine of the slice has a fixed capacity
+ * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if
+ *             it't not a reserved way.
+ * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used
+ *           by any other client than the one its assigned to.
+ * cache_mode: Each slice operates as a cache, this controls the mode of the
+ *             slice normal or TCM
+ * probe_target_ways: Determines what ways to probe for access hit. When
+ *                    configured to 1 only bonus and reseved ways are probed.
+ *                    when configured to 0 all ways in llcc are probed.
+ * dis_cap_alloc: Disable capacity based allocation for a client
+ * retain_on_pc: If this bit is set and client has maitained active vote
+ *               then the ways assigned to this client are not flushed on power
+ *               collapse.
+ * activate_on_init: Activate the slice immidiately after the SCT is programmed
+ */
+#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \
+	{					\
+		.name = n,			\
+		.usecase_id = uid,		\
+		.slice_id = sid,		\
+		.max_cap = mc,			\
+		.priority = p,			\
+		.fixed_size = fs,		\
+		.bonus_ways = bway,		\
+		.res_ways = rway,		\
+		.cache_mode = cmod,		\
+		.probe_target_ways = ptw,	\
+		.dis_cap_alloc = dca,		\
+		.retain_on_pc = rp,		\
+		.activate_on_init = a,		\
+	}
+
+
+static struct llcc_slice_config sdm845_data[] =  {
+	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 1),
+	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 0),
+	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 1),
+	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+};
+
+
+static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
+{
+	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
+}
+
+static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
+	{ .compatible = "qcom,sdm845-llcc", },
+	{ },
+};
+
+static struct platform_driver sdm845_qcom_llcc_driver = {
+	.driver = {
+		.name = "sdm845-llcc",
+		.owner = THIS_MODULE,
+		.of_match_table = sdm845_qcom_llcc_of_match,
+	},
+	.probe = sdm845_qcom_llcc_probe,
+	.remove = qcom_llcc_remove,
+};
+
+static int __init sdm845_init_qcom_llcc_init(void)
+{
+	return platform_driver_register(&sdm845_qcom_llcc_driver);
+}
+module_init(sdm845_init_qcom_llcc_init);
+
+static void __exit sdm845_exit_qcom_llcc_exit(void)
+{
+	platform_driver_unregister(&sdm845_qcom_llcc_driver);
+}
+module_exit(sdm845_exit_qcom_llcc_exit);
+
+MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
new file mode 100644
index 0000000..6e86770
--- /dev/null
+++ b/drivers/soc/qcom/llcc-slice.c
@@ -0,0 +1,454 @@
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)  "%s:" fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/soc/qcom/llcc-qcom.h>
+
+#define ACTIVATE                      0x1
+#define DEACTIVATE                    0x2
+#define ACT_CTRL_OPCODE_ACTIVATE      0x1
+#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
+#define ACT_CTRL_ACT_TRIG             0x1
+#define ACT_CTRL_OPCODE_SHIFT         0x1
+#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
+#define ATTR1_FIXED_SIZE_SHIFT        0x3
+#define ATTR1_PRIORITY_SHIFT          0x4
+#define ATTR1_MAX_CAP_SHIFT           0x10
+#define ATTR0_RES_WAYS_MASK           0x00000fff
+#define ATR0_BONUS_WAYS_MASK          0x0fff0000
+#define ATR0_BONUS_WAYS_SHIFT         0x10
+#define LLCC_STATUS_READ_DELAY 100
+
+#define CACHE_LINE_SIZE_SHIFT 6
+
+#define LLCC_COMMON_STATUS0		0x0003000C
+#define LLCC_LB_CNT_MASK		0xf0000000
+#define LLCC_LB_CNT_SHIFT		28
+
+#define MAX_CAP_TO_BYTES(n) (n * 1024)
+#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
+#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
+#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
+#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
+
+
+
+static const struct regmap_config llcc_regmap_config = {
+		.reg_bits = 32,
+		.reg_stride = 4,
+		.val_bits = 32,
+		.fast_io = true,
+};
+
+
+/* Get the slice entry by index */
+static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev, int n)
+{
+	struct of_phandle_args phargs;
+	struct llcc_drv_data *drv;
+	const struct llcc_slice_config *llcc_data_ptr;
+	struct llcc_slice_desc *desc;
+	struct platform_device *pdev;
+	u32 sz, count;
+
+	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
+				       "#cache-cells", n, &phargs)) {
+		pr_err("can't parse \"cache-slices\" property\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	pdev = of_find_device_by_node(phargs.np);
+	if (!pdev) {
+		pr_err("Cannot find platform device from phandle\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	drv = platform_get_drvdata(pdev);
+	if (!drv) {
+		pr_err("cannot find platform driver data\n");
+		return ERR_PTR(-EFAULT);
+	}
+
+	llcc_data_ptr = drv->slice_data;
+	sz = drv->llcc_config_data_sz;
+	count = 0;
+
+	while (llcc_data_ptr && count < sz) {
+		if (llcc_data_ptr->usecase_id == phargs.args[0])
+			break;
+		llcc_data_ptr++;
+		count++;
+	}
+
+	if (llcc_data_ptr == NULL || count == sz) {
+		pr_err("can't find %d usecase id\n", phargs.args[0]);
+		return ERR_PTR(-ENODEV);
+	}
+
+	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
+	if (!desc)
+		return ERR_PTR(-ENOMEM);
+
+	desc->llcc_slice_id = llcc_data_ptr->slice_id;
+	desc->llcc_slice_size = llcc_data_ptr->max_cap;
+	desc->dev = &pdev->dev;
+
+	return desc;
+}
+
+/**
+ * llcc_slice_getd - get llcc slice descriptor
+ * @dev: Device pointer of the client
+ * @name: Name of the use case
+ *
+ * A pointer to llcc slice descriptor will be returned on success and
+ * and error pointer is returned on failure
+ */
+struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char *name)
+{
+	struct device_node *np = dev->of_node;
+	int index = 0;
+	const char *slice_name;
+	struct property *prop;
+
+	if (!np) {
+		dev_err(dev, "%s() currently only supports DT\n", __func__);
+		return ERR_PTR(-ENOENT);
+	}
+
+	if (!of_get_property(np, "cache-slice-names", NULL)) {
+		dev_err(dev,
+			"%s() requires a \"cache-slice-names\" property\n",
+			__func__);
+		return ERR_PTR(-ENOENT);
+	}
+
+	of_property_for_each_string(np, "cache-slice-names", prop, slice_name) {
+		if (!strcmp(name, slice_name))
+			break;
+		index++;
+	}
+
+	return llcc_slice_get_entry(dev, index);
+}
+EXPORT_SYMBOL(llcc_slice_getd);
+
+/**
+ * llcc_slice_putd - llcc slice descritpor
+ * @desc: Pointer to llcc slice descriptor
+ */
+void llcc_slice_putd(struct llcc_slice_desc *desc)
+{
+	kfree(desc);
+}
+EXPORT_SYMBOL(llcc_slice_putd);
+
+static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
+				u32 act_ctrl_reg_val, u32 status)
+{
+	u32 act_ctrl_reg;
+	u32 status_reg;
+	u32 slice_status;
+	unsigned long timeout;
+
+	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
+	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
+
+	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
+
+	/* Make sure the activate trigger is applied before clearing it */
+	mb();
+
+	/* Clear the ACTIVE trigger */
+	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
+	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
+
+	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
+	while (time_before(jiffies, timeout)) {
+		regmap_read(drv->llcc_map, status_reg, &slice_status);
+		if (!(slice_status & status))
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * llcc_slice_activate - Activate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A value zero will be returned on success and a negative errno will
+ * be returned in error cases
+ */
+int llcc_slice_activate(struct llcc_slice_desc *desc)
+{
+	int rc = -EINVAL;
+	u32 act_ctrl_val;
+	struct llcc_drv_data *drv;
+
+	if (desc == NULL)
+		return rc;
+
+	drv = dev_get_drvdata(desc->dev);
+	if (!drv)
+		return rc;
+
+	mutex_lock(&drv->slice_mutex);
+	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
+		mutex_unlock(&drv->slice_mutex);
+		return 0;
+	}
+
+	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
+	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
+
+	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
+				  DEACTIVATE);
+
+	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
+	mutex_unlock(&drv->slice_mutex);
+
+	return rc;
+}
+EXPORT_SYMBOL(llcc_slice_activate);
+
+/**
+ * llcc_slice_deactivate - Deactivate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A value zero will be returned on success and a negative errno will
+ * be returned in error cases
+ */
+int llcc_slice_deactivate(struct llcc_slice_desc *desc)
+{
+	u32 act_ctrl_val;
+	int rc = -EINVAL;
+	struct llcc_drv_data *drv;
+
+	if (desc == NULL)
+		return rc;
+
+	drv = dev_get_drvdata(desc->dev);
+	if (!drv)
+		return rc;
+
+	mutex_lock(&drv->slice_mutex);
+	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
+		mutex_unlock(&drv->slice_mutex);
+		return 0;
+	}
+	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
+	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
+
+	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
+				  ACTIVATE);
+
+	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
+	mutex_unlock(&drv->slice_mutex);
+
+	return rc;
+}
+EXPORT_SYMBOL(llcc_slice_deactivate);
+
+/**
+ * llcc_get_slice_id - return the slice id
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A positive value will be returned on success and a negative errno will
+ * be returned on error
+ */
+int llcc_get_slice_id(struct llcc_slice_desc *desc)
+{
+	if (!desc)
+		return -EINVAL;
+
+	return desc->llcc_slice_id;
+}
+EXPORT_SYMBOL(llcc_get_slice_id);
+
+/**
+ * llcc_get_slice_size - return the slice id
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A positive value will be returned on success and zero will returned on
+ * error
+ */
+size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
+{
+	if (!desc)
+		return 0;
+
+	return desc->llcc_slice_size;
+}
+EXPORT_SYMBOL(llcc_get_slice_size);
+
+static void qcom_llcc_cfg_program(struct platform_device *pdev)
+{
+	int i;
+	u32 attr1_cfg;
+	u32 attr0_cfg;
+	u32 attr1_val;
+	u32 attr0_val;
+	u32 max_cap_cacheline;
+	u32 sz;
+	const struct llcc_slice_config *llcc_table;
+	struct llcc_slice_desc desc;
+	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
+	u32 b_off = drv->b_off;
+
+	sz = drv->llcc_config_data_sz;
+	llcc_table = drv->slice_data;
+
+	for (i = 0; i < sz; i++) {
+		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
+		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
+
+		attr1_val = llcc_table[i].cache_mode;
+		attr1_val |= (llcc_table[i].probe_target_ways <<
+				ATTR1_PROBE_TARGET_WAYS_SHIFT);
+		attr1_val |= (llcc_table[i].fixed_size <<
+				ATTR1_FIXED_SIZE_SHIFT);
+		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
+
+		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
+
+		/* LLCC instances can vary for each target.
+		 * The SW writes to broadcast register which gets propagated
+		 * to each llcc instace (llcc0,.. llccN).
+		 * Since the size of the memory is divided equally amongst the
+		 * llcc instances, we need to configure the max cap accordingly.
+		 */
+		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
+		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
+		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
+
+		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
+		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
+
+		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
+		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
+
+		/* Make sure that the SCT is programmed before activating */
+		mb();
+
+		if (llcc_table[i].activate_on_init) {
+			desc.llcc_slice_id = llcc_table[i].slice_id;
+			desc.dev = &pdev->dev;
+			if (llcc_slice_activate(&desc)) {
+				pr_err("activate slice id: %d timed out\n",
+						desc.llcc_slice_id);
+			}
+		}
+	}
+}
+
+int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *llcc_cfg, u32 sz)
+{
+	int rc = 0;
+	u32 num_banks = 0;
+	struct device *dev = &pdev->dev;
+	static struct llcc_drv_data *drv_data;
+	struct resource *res;
+	void __iomem *base;
+
+	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
+	if (!drv_data)
+		return PTR_ERR(drv_data);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base)) {
+		dev_err(&pdev->dev, "Cannot find the resource in device\n");
+		return PTR_ERR(base);
+	}
+
+	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, &llcc_regmap_config);
+	if (IS_ERR(drv_data->llcc_map)) {
+		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
+		return PTR_ERR(drv_data->llcc_map);
+	}
+
+	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
+		    &num_banks);
+
+	num_banks &= LLCC_LB_CNT_MASK;
+	num_banks >>= LLCC_LB_CNT_SHIFT;
+	drv_data->num_banks = num_banks;
+
+	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
+				  &drv_data->max_slices);
+	if (rc) {
+		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
+		devm_kfree(&pdev->dev, drv_data);
+		return rc;
+	}
+	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), GFP_KERNEL);
+	if (!drv_data->offsets) {
+		devm_kfree(&pdev->dev, drv_data);
+		return PTR_ERR(drv_data->offsets);
+	}
+
+	drv_data->offsets[0] = 0x0;
+	drv_data->offsets[1] = 0x80000;
+	drv_data->offsets[2] = 0x100000;
+	drv_data->offsets[3] = 0x180000;
+	drv_data->b_off = 0x200000;
+
+	drv_data->llcc_slice_map = kcalloc(BITS_TO_LONGS(drv_data->max_slices),
+				   sizeof(unsigned long), GFP_KERNEL);
+
+	if (!drv_data->llcc_slice_map) {
+		devm_kfree(&pdev->dev, drv_data);
+		return PTR_ERR(drv_data->llcc_slice_map);
+	}
+
+	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
+	drv_data->slice_data = llcc_cfg;
+	drv_data->llcc_config_data_sz = sz;
+	mutex_init(&drv_data->slice_mutex);
+	platform_set_drvdata(pdev, drv_data);
+
+	qcom_llcc_cfg_program(pdev);
+
+	return rc;
+}
+EXPORT_SYMBOL(qcom_llcc_probe);
+
+int qcom_llcc_remove(struct platform_device *pdev)
+{
+	static struct llcc_drv_data *drv_data;
+
+	drv_data = platform_get_drvdata(pdev);
+
+	mutex_destroy(&drv_data->slice_mutex);
+	kfree(drv_data->llcc_slice_map);
+	devm_kfree(&pdev->dev, drv_data);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_llcc_remove);
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
new file mode 100644
index 0000000..c408a8d
--- /dev/null
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -0,0 +1,178 @@
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LLCC_QCOM__
+#define __LLCC_QCOM__
+
+/**
+ * llcc_slice_desc - Cache slice descriptor
+ * @llcc_slice_id: llcc slice id
+ * @llcc_slice_size: Size allocated for the llcc slice
+ * @dev: pointer to llcc device
+ */
+struct llcc_slice_desc {
+	int llcc_slice_id;
+	size_t llcc_slice_size;
+	struct device *dev;
+};
+
+/**
+ * llcc_slice_config - Data associated with the llcc slice
+ * @name: name of the use case associated with the llcc slice
+ * @usecase_id: usecase id for which the llcc slice is used
+ * @slice_id: llcc slice id assigned to each slice
+ * @max_cap: maximum capacity of the llcc slice
+ * @priority: priority of the llcc slice
+ * @fixed_size: whether the llcc slice can grow beyond its size
+ * @bonus_ways: bonus ways associated with llcc slice
+ * @res_ways: reserved ways associated with llcc slice
+ * @cache_mode: mode of the llcce slice
+ * @probe_target_ways: Probe only reserved and bonus ways on a cache miss
+ * @dis_cap_alloc: Disable capacity based allocation
+ * @retain_on_pc: Retain through power collapse
+ * @activate_on_init: activate the slice on init
+ */
+struct llcc_slice_config {
+	const char *name;
+	int usecase_id;
+	int slice_id;
+	u32 max_cap;
+	u32 priority;
+	bool fixed_size;
+	u32 bonus_ways;
+	u32 res_ways;
+	u32 cache_mode;
+	u32 probe_target_ways;
+	bool dis_cap_alloc;
+	bool retain_on_pc;
+	u32 activate_on_init;
+};
+
+/**
+ * llcc_drv_data - Data associated with the llcc driver
+ * @llcc_map: regmap associated with the llcc device
+ * @slice_data: pointer to the data structure associated with slice
+ * @slice_mutex: mutex associated with each slice
+ * @llcc_config_data_sz: size of the config data table
+ * @max_slices: max slices as read from device tree
+ * @b_off: Offset of the broadcast bank
+ * @num_banks: Number of llcc banks
+ * @llcc_slice_map: Bit map to track the active slice ids
+ * @offsets: Pointer to the bank offsets array
+ */
+
+struct llcc_drv_data {
+		struct regmap *llcc_map;
+		const struct llcc_slice_config *slice_data;
+		struct mutex slice_mutex;
+		u32 llcc_config_data_sz;
+		u32 max_slices;
+		u32 b_off;
+		u32 num_banks;
+		unsigned long *llcc_slice_map;
+		u32 *offsets;
+};
+
+
+#ifdef CONFIG_QCOM_LLCC
+/**
+ * llcc_slice_getd - get llcc slice descriptor
+ * @dev: Device pointer of the client
+ * @name: Name of the use case
+ */
+struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char *name);
+
+/**
+ * llcc_slice_putd - llcc slice descritpor
+ * @desc: Pointer to llcc slice descriptor
+ */
+void llcc_slice_putd(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_get_slice_id - get slice id
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_get_slice_id(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_get_slice_size - llcc slice size
+ * @desc: Pointer to llcc slice descriptor
+ */
+size_t llcc_get_slice_size(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_slice_activate - Activate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_slice_activate(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_slice_deactivate - Deactivate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_slice_deactivate(struct llcc_slice_desc *desc);
+
+/**
+ * qcom_llcc_probe - program the sct table
+ * @pdev: platform device pointer
+ * @table: soc sct table
+ */
+int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *table, u32 sz);
+/**
+ * qcom_llcc_remove - clean up llcc driver
+ * @pdev: platform driver pointer
+ */
+int qcom_llcc_remove(struct platform_device *pdev);
+#else
+static inline struct llcc_slice_desc *llcc_slice_getd(struct device *dev,
+			const char *name)
+{
+	return NULL;
+}
+
+static inline void llcc_slice_putd(struct llcc_slice_desc *desc)
+{
+
+};
+
+static inline int llcc_get_slice_id(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+
+static inline size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
+{
+	return 0;
+}
+static inline int llcc_slice_activate(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+
+static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+static inline int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *table, u32 sz)
+{
+	return -ENODEV;
+}
+
+static inline int qcom_llcc_remove(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Rishabh Bhatnagar]

LLCC (Last Level Cache Controller) provides additional cache memory
in the system. LLCC is partitioned into muliple slices and each
slice getting its own priority, size, ID and other config parameters.
LLCC driver programs these parameters for each slice. Clients that
are assigned to use LLCC need to get information such size & ID of the
 slice they get and activate or deactivate the slice as needed. LLCC driver
provides API interfaces for the clients to perform these operations.

Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
---
 drivers/soc/qcom/Kconfig           |  16 ++
 drivers/soc/qcom/Makefile          |   2 +
 drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
 drivers/soc/qcom/llcc-slice.c      | 454 +++++++++++++++++++++++++++++++++++++
 include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
 5 files changed, 770 insertions(+)
 create mode 100644 drivers/soc/qcom/llcc-sdm845.c
 create mode 100644 drivers/soc/qcom/llcc-slice.c
 create mode 100644 include/linux/soc/qcom/llcc-qcom.h

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index e050eb8..28237fc 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -21,6 +21,22 @@ config QCOM_GSBI
           functions for connecting the underlying serial UART, SPI, and I2C
           devices to the output pins.

+config QCOM_LLCC
+	tristate "Qualcomm Technologies, Inc. LLCC driver"
+	depends on ARCH_QCOM
+	help
+	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
+	  Level Cache. This provides interfaces to client's that use the LLCC.
+	  Say yes here to enable LLCC slice driver.
+
+config QCOM_SDM845_LLCC
+	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
+	depends on QCOM_LLCC
+	help
+	  Say yes here to enable the LLCC driver for SDM845. This is provides
+	  data required to configure LLCC so that clients can start using the
+	  LLCC slices.
+
 config QCOM_MDT_LOADER
 	tristate
 	select QCOM_SCM
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index dcebf28..e16d6a2 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
 obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
 obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
 obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
+obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
+obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c
new file mode 100644
index 0000000..cd431d9
--- /dev/null
+++ b/drivers/soc/qcom/llcc-sdm845.c
@@ -0,0 +1,120 @@
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/llcc-qcom.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+
+/*
+ * SCT entry contains of the following parameters
+ * name: Name of the client's use case for which the llcc slice is used
+ * uid: Unique id for the client's use case
+ * slice_id: llcc slice id for each client
+ * max_cap: The maximum capacity of the cache slice provided in KB
+ * priority: Priority of the client used to select victim line for replacement
+ * fixed_size: Determine of the slice has a fixed capacity
+ * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if
+ *             it't not a reserved way.
+ * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used
+ *           by any other client than the one its assigned to.
+ * cache_mode: Each slice operates as a cache, this controls the mode of the
+ *             slice normal or TCM
+ * probe_target_ways: Determines what ways to probe for access hit. When
+ *                    configured to 1 only bonus and reseved ways are probed.
+ *                    when configured to 0 all ways in llcc are probed.
+ * dis_cap_alloc: Disable capacity based allocation for a client
+ * retain_on_pc: If this bit is set and client has maitained active vote
+ *               then the ways assigned to this client are not flushed on power
+ *               collapse.
+ * activate_on_init: Activate the slice immidiately after the SCT is programmed
+ */
+#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \
+	{					\
+		.name = n,			\
+		.usecase_id = uid,		\
+		.slice_id = sid,		\
+		.max_cap = mc,			\
+		.priority = p,			\
+		.fixed_size = fs,		\
+		.bonus_ways = bway,		\
+		.res_ways = rway,		\
+		.cache_mode = cmod,		\
+		.probe_target_ways = ptw,	\
+		.dis_cap_alloc = dca,		\
+		.retain_on_pc = rp,		\
+		.activate_on_init = a,		\
+	}
+
+
+static struct llcc_slice_config sdm845_data[] =  {
+	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 1),
+	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 0),
+	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 1),
+	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 1, 0),
+	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0),
+	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 0),
+};
+
+
+static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
+{
+	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
+}
+
+static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
+	{ .compatible = "qcom,sdm845-llcc", },
+	{ },
+};
+
+static struct platform_driver sdm845_qcom_llcc_driver = {
+	.driver = {
+		.name = "sdm845-llcc",
+		.owner = THIS_MODULE,
+		.of_match_table = sdm845_qcom_llcc_of_match,
+	},
+	.probe = sdm845_qcom_llcc_probe,
+	.remove = qcom_llcc_remove,
+};
+
+static int __init sdm845_init_qcom_llcc_init(void)
+{
+	return platform_driver_register(&sdm845_qcom_llcc_driver);
+}
+module_init(sdm845_init_qcom_llcc_init);
+
+static void __exit sdm845_exit_qcom_llcc_exit(void)
+{
+	platform_driver_unregister(&sdm845_qcom_llcc_driver);
+}
+module_exit(sdm845_exit_qcom_llcc_exit);
+
+MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
new file mode 100644
index 0000000..6e86770
--- /dev/null
+++ b/drivers/soc/qcom/llcc-slice.c
@@ -0,0 +1,454 @@
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)  "%s:" fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/soc/qcom/llcc-qcom.h>
+
+#define ACTIVATE                      0x1
+#define DEACTIVATE                    0x2
+#define ACT_CTRL_OPCODE_ACTIVATE      0x1
+#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
+#define ACT_CTRL_ACT_TRIG             0x1
+#define ACT_CTRL_OPCODE_SHIFT         0x1
+#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
+#define ATTR1_FIXED_SIZE_SHIFT        0x3
+#define ATTR1_PRIORITY_SHIFT          0x4
+#define ATTR1_MAX_CAP_SHIFT           0x10
+#define ATTR0_RES_WAYS_MASK           0x00000fff
+#define ATR0_BONUS_WAYS_MASK          0x0fff0000
+#define ATR0_BONUS_WAYS_SHIFT         0x10
+#define LLCC_STATUS_READ_DELAY 100
+
+#define CACHE_LINE_SIZE_SHIFT 6
+
+#define LLCC_COMMON_STATUS0		0x0003000C
+#define LLCC_LB_CNT_MASK		0xf0000000
+#define LLCC_LB_CNT_SHIFT		28
+
+#define MAX_CAP_TO_BYTES(n) (n * 1024)
+#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
+#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
+#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
+#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
+
+
+
+static const struct regmap_config llcc_regmap_config = {
+		.reg_bits = 32,
+		.reg_stride = 4,
+		.val_bits = 32,
+		.fast_io = true,
+};
+
+
+/* Get the slice entry by index */
+static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev, int n)
+{
+	struct of_phandle_args phargs;
+	struct llcc_drv_data *drv;
+	const struct llcc_slice_config *llcc_data_ptr;
+	struct llcc_slice_desc *desc;
+	struct platform_device *pdev;
+	u32 sz, count;
+
+	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
+				       "#cache-cells", n, &phargs)) {
+		pr_err("can't parse \"cache-slices\" property\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	pdev = of_find_device_by_node(phargs.np);
+	if (!pdev) {
+		pr_err("Cannot find platform device from phandle\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	drv = platform_get_drvdata(pdev);
+	if (!drv) {
+		pr_err("cannot find platform driver data\n");
+		return ERR_PTR(-EFAULT);
+	}
+
+	llcc_data_ptr = drv->slice_data;
+	sz = drv->llcc_config_data_sz;
+	count = 0;
+
+	while (llcc_data_ptr && count < sz) {
+		if (llcc_data_ptr->usecase_id == phargs.args[0])
+			break;
+		llcc_data_ptr++;
+		count++;
+	}
+
+	if (llcc_data_ptr == NULL || count == sz) {
+		pr_err("can't find %d usecase id\n", phargs.args[0]);
+		return ERR_PTR(-ENODEV);
+	}
+
+	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
+	if (!desc)
+		return ERR_PTR(-ENOMEM);
+
+	desc->llcc_slice_id = llcc_data_ptr->slice_id;
+	desc->llcc_slice_size = llcc_data_ptr->max_cap;
+	desc->dev = &pdev->dev;
+
+	return desc;
+}
+
+/**
+ * llcc_slice_getd - get llcc slice descriptor
+ * @dev: Device pointer of the client
+ * @name: Name of the use case
+ *
+ * A pointer to llcc slice descriptor will be returned on success and
+ * and error pointer is returned on failure
+ */
+struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char *name)
+{
+	struct device_node *np = dev->of_node;
+	int index = 0;
+	const char *slice_name;
+	struct property *prop;
+
+	if (!np) {
+		dev_err(dev, "%s() currently only supports DT\n", __func__);
+		return ERR_PTR(-ENOENT);
+	}
+
+	if (!of_get_property(np, "cache-slice-names", NULL)) {
+		dev_err(dev,
+			"%s() requires a \"cache-slice-names\" property\n",
+			__func__);
+		return ERR_PTR(-ENOENT);
+	}
+
+	of_property_for_each_string(np, "cache-slice-names", prop, slice_name) {
+		if (!strcmp(name, slice_name))
+			break;
+		index++;
+	}
+
+	return llcc_slice_get_entry(dev, index);
+}
+EXPORT_SYMBOL(llcc_slice_getd);
+
+/**
+ * llcc_slice_putd - llcc slice descritpor
+ * @desc: Pointer to llcc slice descriptor
+ */
+void llcc_slice_putd(struct llcc_slice_desc *desc)
+{
+	kfree(desc);
+}
+EXPORT_SYMBOL(llcc_slice_putd);
+
+static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
+				u32 act_ctrl_reg_val, u32 status)
+{
+	u32 act_ctrl_reg;
+	u32 status_reg;
+	u32 slice_status;
+	unsigned long timeout;
+
+	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
+	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
+
+	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
+
+	/* Make sure the activate trigger is applied before clearing it */
+	mb();
+
+	/* Clear the ACTIVE trigger */
+	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
+	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
+
+	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
+	while (time_before(jiffies, timeout)) {
+		regmap_read(drv->llcc_map, status_reg, &slice_status);
+		if (!(slice_status & status))
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+/**
+ * llcc_slice_activate - Activate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A value zero will be returned on success and a negative errno will
+ * be returned in error cases
+ */
+int llcc_slice_activate(struct llcc_slice_desc *desc)
+{
+	int rc = -EINVAL;
+	u32 act_ctrl_val;
+	struct llcc_drv_data *drv;
+
+	if (desc == NULL)
+		return rc;
+
+	drv = dev_get_drvdata(desc->dev);
+	if (!drv)
+		return rc;
+
+	mutex_lock(&drv->slice_mutex);
+	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
+		mutex_unlock(&drv->slice_mutex);
+		return 0;
+	}
+
+	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
+	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
+
+	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
+				  DEACTIVATE);
+
+	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
+	mutex_unlock(&drv->slice_mutex);
+
+	return rc;
+}
+EXPORT_SYMBOL(llcc_slice_activate);
+
+/**
+ * llcc_slice_deactivate - Deactivate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A value zero will be returned on success and a negative errno will
+ * be returned in error cases
+ */
+int llcc_slice_deactivate(struct llcc_slice_desc *desc)
+{
+	u32 act_ctrl_val;
+	int rc = -EINVAL;
+	struct llcc_drv_data *drv;
+
+	if (desc == NULL)
+		return rc;
+
+	drv = dev_get_drvdata(desc->dev);
+	if (!drv)
+		return rc;
+
+	mutex_lock(&drv->slice_mutex);
+	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
+		mutex_unlock(&drv->slice_mutex);
+		return 0;
+	}
+	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
+	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
+
+	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
+				  ACTIVATE);
+
+	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
+	mutex_unlock(&drv->slice_mutex);
+
+	return rc;
+}
+EXPORT_SYMBOL(llcc_slice_deactivate);
+
+/**
+ * llcc_get_slice_id - return the slice id
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A positive value will be returned on success and a negative errno will
+ * be returned on error
+ */
+int llcc_get_slice_id(struct llcc_slice_desc *desc)
+{
+	if (!desc)
+		return -EINVAL;
+
+	return desc->llcc_slice_id;
+}
+EXPORT_SYMBOL(llcc_get_slice_id);
+
+/**
+ * llcc_get_slice_size - return the slice id
+ * @desc: Pointer to llcc slice descriptor
+ *
+ * A positive value will be returned on success and zero will returned on
+ * error
+ */
+size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
+{
+	if (!desc)
+		return 0;
+
+	return desc->llcc_slice_size;
+}
+EXPORT_SYMBOL(llcc_get_slice_size);
+
+static void qcom_llcc_cfg_program(struct platform_device *pdev)
+{
+	int i;
+	u32 attr1_cfg;
+	u32 attr0_cfg;
+	u32 attr1_val;
+	u32 attr0_val;
+	u32 max_cap_cacheline;
+	u32 sz;
+	const struct llcc_slice_config *llcc_table;
+	struct llcc_slice_desc desc;
+	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
+	u32 b_off = drv->b_off;
+
+	sz = drv->llcc_config_data_sz;
+	llcc_table = drv->slice_data;
+
+	for (i = 0; i < sz; i++) {
+		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
+		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
+
+		attr1_val = llcc_table[i].cache_mode;
+		attr1_val |= (llcc_table[i].probe_target_ways <<
+				ATTR1_PROBE_TARGET_WAYS_SHIFT);
+		attr1_val |= (llcc_table[i].fixed_size <<
+				ATTR1_FIXED_SIZE_SHIFT);
+		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
+
+		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
+
+		/* LLCC instances can vary for each target.
+		 * The SW writes to broadcast register which gets propagated
+		 * to each llcc instace (llcc0,.. llccN).
+		 * Since the size of the memory is divided equally amongst the
+		 * llcc instances, we need to configure the max cap accordingly.
+		 */
+		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
+		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
+		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
+
+		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
+		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
+
+		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
+		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
+
+		/* Make sure that the SCT is programmed before activating */
+		mb();
+
+		if (llcc_table[i].activate_on_init) {
+			desc.llcc_slice_id = llcc_table[i].slice_id;
+			desc.dev = &pdev->dev;
+			if (llcc_slice_activate(&desc)) {
+				pr_err("activate slice id: %d timed out\n",
+						desc.llcc_slice_id);
+			}
+		}
+	}
+}
+
+int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *llcc_cfg, u32 sz)
+{
+	int rc = 0;
+	u32 num_banks = 0;
+	struct device *dev = &pdev->dev;
+	static struct llcc_drv_data *drv_data;
+	struct resource *res;
+	void __iomem *base;
+
+	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
+	if (!drv_data)
+		return PTR_ERR(drv_data);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base)) {
+		dev_err(&pdev->dev, "Cannot find the resource in device\n");
+		return PTR_ERR(base);
+	}
+
+	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, &llcc_regmap_config);
+	if (IS_ERR(drv_data->llcc_map)) {
+		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
+		return PTR_ERR(drv_data->llcc_map);
+	}
+
+	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
+		    &num_banks);
+
+	num_banks &= LLCC_LB_CNT_MASK;
+	num_banks >>= LLCC_LB_CNT_SHIFT;
+	drv_data->num_banks = num_banks;
+
+	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
+				  &drv_data->max_slices);
+	if (rc) {
+		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
+		devm_kfree(&pdev->dev, drv_data);
+		return rc;
+	}
+	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), GFP_KERNEL);
+	if (!drv_data->offsets) {
+		devm_kfree(&pdev->dev, drv_data);
+		return PTR_ERR(drv_data->offsets);
+	}
+
+	drv_data->offsets[0] = 0x0;
+	drv_data->offsets[1] = 0x80000;
+	drv_data->offsets[2] = 0x100000;
+	drv_data->offsets[3] = 0x180000;
+	drv_data->b_off = 0x200000;
+
+	drv_data->llcc_slice_map = kcalloc(BITS_TO_LONGS(drv_data->max_slices),
+				   sizeof(unsigned long), GFP_KERNEL);
+
+	if (!drv_data->llcc_slice_map) {
+		devm_kfree(&pdev->dev, drv_data);
+		return PTR_ERR(drv_data->llcc_slice_map);
+	}
+
+	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
+	drv_data->slice_data = llcc_cfg;
+	drv_data->llcc_config_data_sz = sz;
+	mutex_init(&drv_data->slice_mutex);
+	platform_set_drvdata(pdev, drv_data);
+
+	qcom_llcc_cfg_program(pdev);
+
+	return rc;
+}
+EXPORT_SYMBOL(qcom_llcc_probe);
+
+int qcom_llcc_remove(struct platform_device *pdev)
+{
+	static struct llcc_drv_data *drv_data;
+
+	drv_data = platform_get_drvdata(pdev);
+
+	mutex_destroy(&drv_data->slice_mutex);
+	kfree(drv_data->llcc_slice_map);
+	devm_kfree(&pdev->dev, drv_data);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+EXPORT_SYMBOL(qcom_llcc_remove);
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
new file mode 100644
index 0000000..c408a8d
--- /dev/null
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -0,0 +1,178 @@
+/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LLCC_QCOM__
+#define __LLCC_QCOM__
+
+/**
+ * llcc_slice_desc - Cache slice descriptor
+ * @llcc_slice_id: llcc slice id
+ * @llcc_slice_size: Size allocated for the llcc slice
+ * @dev: pointer to llcc device
+ */
+struct llcc_slice_desc {
+	int llcc_slice_id;
+	size_t llcc_slice_size;
+	struct device *dev;
+};
+
+/**
+ * llcc_slice_config - Data associated with the llcc slice
+ * @name: name of the use case associated with the llcc slice
+ * @usecase_id: usecase id for which the llcc slice is used
+ * @slice_id: llcc slice id assigned to each slice
+ * @max_cap: maximum capacity of the llcc slice
+ * @priority: priority of the llcc slice
+ * @fixed_size: whether the llcc slice can grow beyond its size
+ * @bonus_ways: bonus ways associated with llcc slice
+ * @res_ways: reserved ways associated with llcc slice
+ * @cache_mode: mode of the llcce slice
+ * @probe_target_ways: Probe only reserved and bonus ways on a cache miss
+ * @dis_cap_alloc: Disable capacity based allocation
+ * @retain_on_pc: Retain through power collapse
+ * @activate_on_init: activate the slice on init
+ */
+struct llcc_slice_config {
+	const char *name;
+	int usecase_id;
+	int slice_id;
+	u32 max_cap;
+	u32 priority;
+	bool fixed_size;
+	u32 bonus_ways;
+	u32 res_ways;
+	u32 cache_mode;
+	u32 probe_target_ways;
+	bool dis_cap_alloc;
+	bool retain_on_pc;
+	u32 activate_on_init;
+};
+
+/**
+ * llcc_drv_data - Data associated with the llcc driver
+ * @llcc_map: regmap associated with the llcc device
+ * @slice_data: pointer to the data structure associated with slice
+ * @slice_mutex: mutex associated with each slice
+ * @llcc_config_data_sz: size of the config data table
+ * @max_slices: max slices as read from device tree
+ * @b_off: Offset of the broadcast bank
+ * @num_banks: Number of llcc banks
+ * @llcc_slice_map: Bit map to track the active slice ids
+ * @offsets: Pointer to the bank offsets array
+ */
+
+struct llcc_drv_data {
+		struct regmap *llcc_map;
+		const struct llcc_slice_config *slice_data;
+		struct mutex slice_mutex;
+		u32 llcc_config_data_sz;
+		u32 max_slices;
+		u32 b_off;
+		u32 num_banks;
+		unsigned long *llcc_slice_map;
+		u32 *offsets;
+};
+
+
+#ifdef CONFIG_QCOM_LLCC
+/**
+ * llcc_slice_getd - get llcc slice descriptor
+ * @dev: Device pointer of the client
+ * @name: Name of the use case
+ */
+struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char *name);
+
+/**
+ * llcc_slice_putd - llcc slice descritpor
+ * @desc: Pointer to llcc slice descriptor
+ */
+void llcc_slice_putd(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_get_slice_id - get slice id
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_get_slice_id(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_get_slice_size - llcc slice size
+ * @desc: Pointer to llcc slice descriptor
+ */
+size_t llcc_get_slice_size(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_slice_activate - Activate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_slice_activate(struct llcc_slice_desc *desc);
+
+/**
+ * llcc_slice_deactivate - Deactivate the llcc slice
+ * @desc: Pointer to llcc slice descriptor
+ */
+int llcc_slice_deactivate(struct llcc_slice_desc *desc);
+
+/**
+ * qcom_llcc_probe - program the sct table
+ * @pdev: platform device pointer
+ * @table: soc sct table
+ */
+int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *table, u32 sz);
+/**
+ * qcom_llcc_remove - clean up llcc driver
+ * @pdev: platform driver pointer
+ */
+int qcom_llcc_remove(struct platform_device *pdev);
+#else
+static inline struct llcc_slice_desc *llcc_slice_getd(struct device *dev,
+			const char *name)
+{
+	return NULL;
+}
+
+static inline void llcc_slice_putd(struct llcc_slice_desc *desc)
+{
+
+};
+
+static inline int llcc_get_slice_id(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+
+static inline size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
+{
+	return 0;
+}
+static inline int llcc_slice_activate(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+
+static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc)
+{
+	return -EINVAL;
+}
+static inline int qcom_llcc_probe(struct platform_device *pdev,
+		      const struct llcc_slice_config *table, u32 sz)
+{
+	return -ENODEV;
+}
+
+static inline int qcom_llcc_remove(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[Evan Green]

Hi Rishabh,

On Tue, Mar 27, 2018 at 11:54 AM Rishabh Bhatnagar <rishabhb@codeaurora.org>
wrote:

> LLCC (Last Level Cache Controller) provides additional cache memory
> in the system. LLCC is partitioned into muliple slices and each
> slice getting its own priority, size, ID and other config parameters.
> LLCC driver programs these parameters for each slice. Clients that
> are assigned to use LLCC need to get information such size & ID of the
>    slice they get and activate or deactivate the slice as needed. LLCC
driver
> provides API interfaces for the clients to perform these operations.

> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>    drivers/soc/qcom/Kconfig           |  16 ++
>    drivers/soc/qcom/Makefile          |   2 +
>    drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>    drivers/soc/qcom/llcc-slice.c      | 454
+++++++++++++++++++++++++++++++++++++
>    include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>    5 files changed, 770 insertions(+)
>    create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>    create mode 100644 drivers/soc/qcom/llcc-slice.c
>    create mode 100644 include/linux/soc/qcom/llcc-qcom.h

> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index e050eb8..28237fc 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -21,6 +21,22 @@ config QCOM_GSBI
>              functions for connecting the underlying serial UART, SPI, and
I2C
>              devices to the output pins.

> +config QCOM_LLCC
> +       tristate "Qualcomm Technologies, Inc. LLCC driver"
> +       depends on ARCH_QCOM
> +       help
> +         Qualcomm Technologies, Inc. platform specific LLCC driver for
Last
> +         Level Cache. This provides interfaces to client's that use the
LLCC.
> +         Say yes here to enable LLCC slice driver.

It would be nice if the acronym decoding of Last Level Cache Controller
were actually spelled out here. You almost do it, but never quite
get the CC part.

> +
> +config QCOM_SDM845_LLCC
> +       tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
> +       depends on QCOM_LLCC
> +       help
> +         Say yes here to enable the LLCC driver for SDM845. This is
provides

s/is provides/provides/

> +         data required to configure LLCC so that clients can start using
the
> +         LLCC slices.
> +
>    config QCOM_MDT_LOADER
>           tristate
>           select QCOM_SCM
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index dcebf28..e16d6a2 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>    obj-$(CONFIG_QCOM_SMP2P)       += smp2p.o
>    obj-$(CONFIG_QCOM_SMSM)        += smsm.o
>    obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
> diff --git a/drivers/soc/qcom/llcc-sdm845.c
b/drivers/soc/qcom/llcc-sdm845.c
> new file mode 100644
> index 0000000..cd431d9
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-sdm845.c
> @@ -0,0 +1,120 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>

Remove this, it's unused.

> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/soc/qcom/llcc-qcom.h>
> +#include <linux/mfd/syscon.h>

Remove.

> +#include <linux/regmap.h>

Remove.

> +
> +
> +/*
> + * SCT entry contains of the following parameters

What does SCT stand for? Slender cat tree. Can you spell that out somewhere?

> + * name: Name of the client's use case for which the llcc slice is used
> + * uid: Unique id for the client's use case
> + * slice_id: llcc slice id for each client
> + * max_cap: The maximum capacity of the cache slice provided in KB
> + * priority: Priority of the client used to select victim line for
replacement

priority and fixed_size are out of order.

> + * fixed_size: Determine of the slice has a fixed capacity

s/Determine of/Determines if/

> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used
only if
> + *             it't not a reserved way.

it't. Might be more clear as "Bonus ways to be used by any slice, used only
if no reserved ways are available" (assuming that statement is correct?)

> + * res_ways: Reserved ways for the cache slice, the reserved ways cannot
be used
> + *           by any other client than the one its assigned to.
> + * cache_mode: Each slice operates as a cache, this controls the mode of
the
> + *             slice normal or TCM

slice: normal or TCM (what does TCM stand for?)

> + * probe_target_ways: Determines what ways to probe for access hit. When
> + *                    configured to 1 only bonus and reseved ways are
probed.

reserved

> + *                    when configured to 0 all ways in llcc are probed.

Capitalize When

> + * dis_cap_alloc: Disable capacity based allocation for a client
> + * retain_on_pc: If this bit is set and client has maitained active vote
> + *               then the ways assigned to this client are not flushed
on power
> + *               collapse.
> + * activate_on_init: Activate the slice immidiately after the SCT is
programmed

immediately

> + */
> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca,
rp, a) \
> +       {                                       \
> +               .name = n,                      \
> +               .usecase_id = uid,              \
> +               .slice_id = sid,                \
> +               .max_cap = mc,                  \
> +               .priority = p,                  \
> +               .fixed_size = fs,               \
> +               .bonus_ways = bway,             \
> +               .res_ways = rway,               \
> +               .cache_mode = cmod,             \
> +               .probe_target_ways = ptw,       \
> +               .dis_cap_alloc = dca,           \
> +               .retain_on_pc = rp,             \
> +               .activate_on_init = a,          \
> +       }
> +
> +
> +static struct llcc_slice_config sdm845_data[] =  {
> +       SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 1),
> +       SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1,
1, 0),
> +       SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0,
1, 1, 0),

You've got a leading zero on 0x0FC, but not on any other other shorter
values in this column of the table. Maybe remove? That would also get you
back under 80 characters for this line :)

> +       SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1,
0, 1),
> +       SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0,
1, 1, 0),
> +       SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +};

Lowercase hex values, please. The table is also sporadically adds extra
spaces between fields. It appears to be done in an effort to line up the
columns, but the columns don't really line up super well anyway, due to a
couple long strings. Not sure what the best strategy is for cleanup here,
maybe someone else feels like chiming in.


> +
> +
> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
> +{
> +       return qcom_llcc_probe(pdev, sdm845_data,
ARRAY_SIZE(sdm845_data));
> +}
> +
> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
> +       { .compatible = "qcom,sdm845-llcc", },
> +       { },
> +};
> +
> +static struct platform_driver sdm845_qcom_llcc_driver = {
> +       .driver = {
> +               .name = "sdm845-llcc",
> +               .owner = THIS_MODULE,
> +               .of_match_table = sdm845_qcom_llcc_of_match,
> +       },
> +       .probe = sdm845_qcom_llcc_probe,
> +       .remove = qcom_llcc_remove,
> +};
> +
> +static int __init sdm845_init_qcom_llcc_init(void)
> +{
> +       return platform_driver_register(&sdm845_qcom_llcc_driver);
> +}
> +module_init(sdm845_init_qcom_llcc_init);
> +
> +static void __exit sdm845_exit_qcom_llcc_exit(void)
> +{
> +       platform_driver_unregister(&sdm845_qcom_llcc_driver);
> +}
> +module_exit(sdm845_exit_qcom_llcc_exit);
> +
> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
> new file mode 100644
> index 0000000..6e86770
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-slice.c
> @@ -0,0 +1,454 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt)  "%s:" fmt, __func__
> +
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/mutex.h>
> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/soc/qcom/llcc-qcom.h>

Includes are generally alphabetized, yes?

> +
> +#define ACTIVATE                      0x1
> +#define DEACTIVATE                    0x2
> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
> +#define ACT_CTRL_ACT_TRIG             0x1
> +#define ACT_CTRL_OPCODE_SHIFT         0x1
> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
> +#define ATTR1_PRIORITY_SHIFT          0x4
> +#define ATTR1_MAX_CAP_SHIFT           0x10
> +#define ATTR0_RES_WAYS_MASK           0x00000fff
> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
> +#define ATR0_BONUS_WAYS_SHIFT         0x10
> +#define LLCC_STATUS_READ_DELAY 100
> +
> +#define CACHE_LINE_SIZE_SHIFT 6
> +
> +#define LLCC_COMMON_STATUS0            0x0003000C

lowercase hex.

> +#define LLCC_LB_CNT_MASK               0xf0000000
> +#define LLCC_LB_CNT_SHIFT              28
> +
> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
> +
> +
> +

too many newlines.

> +static const struct regmap_config llcc_regmap_config = {
> +               .reg_bits = 32,
> +               .reg_stride = 4,
> +               .val_bits = 32,
> +               .fast_io = true,
> +};
> +
> +
> +/* Get the slice entry by index */
> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev,
int n)
> +{
> +       struct of_phandle_args phargs;
> +       struct llcc_drv_data *drv;
> +       const struct llcc_slice_config *llcc_data_ptr;
> +       struct llcc_slice_desc *desc;
> +       struct platform_device *pdev;
> +       u32 sz, count;
> +
> +       if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
> +                                      "#cache-cells", n, &phargs)) {
> +               pr_err("can't parse \"cache-slices\" property\n");
> +               return ERR_PTR(-ENODEV);
> +       }
> +
> +       pdev = of_find_device_by_node(phargs.np);
> +       if (!pdev) {
> +               pr_err("Cannot find platform device from phandle\n");
> +               return ERR_PTR(-ENODEV);
> +       }
> +
> +       drv = platform_get_drvdata(pdev);
> +       if (!drv) {
> +               pr_err("cannot find platform driver data\n");
> +               return ERR_PTR(-EFAULT);
> +       }
> +
> +       llcc_data_ptr = drv->slice_data;
> +       sz = drv->llcc_config_data_sz;
> +       count = 0;
> +
> +       while (llcc_data_ptr && count < sz) {
> +               if (llcc_data_ptr->usecase_id == phargs.args[0])
> +                       break;
> +               llcc_data_ptr++;
> +               count++;
> +       }
> +
> +       if (llcc_data_ptr == NULL || count == sz) {
> +               pr_err("can't find %d usecase id\n", phargs.args[0]);
> +               return ERR_PTR(-ENODEV);
> +       }
> +
> +       desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
> +       if (!desc)
> +               return ERR_PTR(-ENOMEM);
> +
> +       desc->llcc_slice_id = llcc_data_ptr->slice_id;
> +       desc->llcc_slice_size = llcc_data_ptr->max_cap;
> +       desc->dev = &pdev->dev;
> +
> +       return desc;
> +}
> +
> +/**
> + * llcc_slice_getd - get llcc slice descriptor
> + * @dev: Device pointer of the client
> + * @name: Name of the use case
> + *
> + * A pointer to llcc slice descriptor will be returned on success and
> + * and error pointer is returned on failure
> + */
> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char
*name)
> +{
> +       struct device_node *np = dev->of_node;
> +       int index = 0;
> +       const char *slice_name;
> +       struct property *prop;
> +
> +       if (!np) {
> +               dev_err(dev, "%s() currently only supports DT\n",
__func__);
> +               return ERR_PTR(-ENOENT);
> +       }
> +
> +       if (!of_get_property(np, "cache-slice-names", NULL)) {
> +               dev_err(dev,
> +                       "%s() requires a \"cache-slice-names\"
property\n",
> +                       __func__);
> +               return ERR_PTR(-ENOENT);
> +       }
> +
> +       of_property_for_each_string(np, "cache-slice-names", prop,
slice_name) {
> +               if (!strcmp(name, slice_name))
> +                       break;
> +               index++;
> +       }
> +
> +       return llcc_slice_get_entry(dev, index);
> +}
> +EXPORT_SYMBOL(llcc_slice_getd);
> +
> +/**
> + * llcc_slice_putd - llcc slice descritpor
> + * @desc: Pointer to llcc slice descriptor
> + */
> +void llcc_slice_putd(struct llcc_slice_desc *desc)
> +{
> +       kfree(desc);
> +}
> +EXPORT_SYMBOL(llcc_slice_putd);
> +
> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
> +                               u32 act_ctrl_reg_val, u32 status)
> +{
> +       u32 act_ctrl_reg;
> +       u32 status_reg;
> +       u32 slice_status;
> +       unsigned long timeout;
> +
> +       act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
> +       status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
> +
> +       regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> +
> +       /* Make sure the activate trigger is applied before clearing it */
> +       mb();

I don't think you need this, because remap_write has a lock in it.

> +
> +       /* Clear the ACTIVE trigger */
> +       act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;

Maybe you should also OR in ACT_CTRL_ACT_TRIG in this function for the
write above. That would give this function some symmetry and remove the
duplication of having to set it in all of the places you call this function.

> +       regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> +
> +       timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
> +       while (time_before(jiffies, timeout)) {
> +               regmap_read(drv->llcc_map, status_reg, &slice_status);
> +               if (!(slice_status & status))
> +                       return 0;
> +       }
> +

I think theres a regmap_read_poll_timeout. Can you use that instead?

> +       return -ETIMEDOUT;
> +}
> +
> +/**
> + * llcc_slice_activate - Activate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_activate(struct llcc_slice_desc *desc)
> +{
> +       int rc = -EINVAL;
> +       u32 act_ctrl_val;
> +       struct llcc_drv_data *drv;
> +
> +       if (desc == NULL)
> +               return rc;
> +
> +       drv = dev_get_drvdata(desc->dev);
> +       if (!drv)
> +               return rc;
> +
> +       mutex_lock(&drv->slice_mutex);
> +       if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +               mutex_unlock(&drv->slice_mutex);
> +               return 0;
> +       }
> +
> +       act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
> +       act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +       rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +                                 DEACTIVATE);
> +
> +       __set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +       mutex_unlock(&drv->slice_mutex);
> +
> +       return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_activate);
> +
> +/**
> + * llcc_slice_deactivate - Deactivate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> +{
> +       u32 act_ctrl_val;
> +       int rc = -EINVAL;
> +       struct llcc_drv_data *drv;
> +
> +       if (desc == NULL)
> +               return rc;
> +
> +       drv = dev_get_drvdata(desc->dev);
> +       if (!drv)
> +               return rc;
> +
> +       mutex_lock(&drv->slice_mutex);
> +       if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +               mutex_unlock(&drv->slice_mutex);
> +               return 0;
> +       }
> +       act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE <<
ACT_CTRL_OPCODE_SHIFT;
> +       act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +       rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +                                 ACTIVATE);
> +
> +       __clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +       mutex_unlock(&drv->slice_mutex);
> +
> +       return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_deactivate);
> +
> +/**
> + * llcc_get_slice_id - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and a negative errno will
> + * be returned on error
> + */
> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
> +{
> +       if (!desc)
> +               return -EINVAL;
> +
> +       return desc->llcc_slice_id;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_id);
> +
> +/**
> + * llcc_get_slice_size - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and zero will returned on
> + * error
> + */
> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
> +{
> +       if (!desc)
> +               return 0;
> +
> +       return desc->llcc_slice_size;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_size);
> +
> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
> +{
> +       int i;
> +       u32 attr1_cfg;
> +       u32 attr0_cfg;
> +       u32 attr1_val;
> +       u32 attr0_val;
> +       u32 max_cap_cacheline;
> +       u32 sz;
> +       const struct llcc_slice_config *llcc_table;
> +       struct llcc_slice_desc desc;
> +       struct llcc_drv_data *drv = platform_get_drvdata(pdev);
> +       u32 b_off = drv->b_off;
> +
> +       sz = drv->llcc_config_data_sz;
> +       llcc_table = drv->slice_data;
> +
> +       for (i = 0; i < sz; i++) {
> +               attr1_cfg = b_off +
LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
> +               attr0_cfg = b_off +
LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
> +
> +               attr1_val = llcc_table[i].cache_mode;
> +               attr1_val |= (llcc_table[i].probe_target_ways <<
> +                               ATTR1_PROBE_TARGET_WAYS_SHIFT);
> +               attr1_val |= (llcc_table[i].fixed_size <<
> +                               ATTR1_FIXED_SIZE_SHIFT);
> +               attr1_val |= (llcc_table[i].priority <<
ATTR1_PRIORITY_SHIFT);
> +
> +               max_cap_cacheline =
MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
> +
> +               /* LLCC instances can vary for each target.
> +                * The SW writes to broadcast register which gets
propagated
> +                * to each llcc instace (llcc0,.. llccN).
> +                * Since the size of the memory is divided equally
amongst the
> +                * llcc instances, we need to configure the max cap
accordingly.
> +                */
> +               max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
> +               max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
> +               attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
> +
> +               attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
> +               attr0_val |= llcc_table[i].bonus_ways <<
ATR0_BONUS_WAYS_SHIFT;
> +
> +               regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
> +               regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
> +
> +               /* Make sure that the SCT is programmed before activating
*/
> +               mb();

Again, I don't think this is needed.

> +
> +               if (llcc_table[i].activate_on_init) {
> +                       desc.llcc_slice_id = llcc_table[i].slice_id;
> +                       desc.dev = &pdev->dev;
> +                       if (llcc_slice_activate(&desc)) {
> +                               pr_err("activate slice id: %d timed
out\n",
> +                                               desc.llcc_slice_id);
> +                       }
> +               }
> +       }
> +}
> +
> +int qcom_llcc_probe(struct platform_device *pdev,
> +                     const struct llcc_slice_config *llcc_cfg, u32 sz)
> +{
> +       int rc = 0;
> +       u32 num_banks = 0;
> +       struct device *dev = &pdev->dev;
> +       static struct llcc_drv_data *drv_data;
> +       struct resource *res;
> +       void __iomem *base;
> +
> +       drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
> +       if (!drv_data)
> +               return PTR_ERR(drv_data);
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(base)) {
> +               dev_err(&pdev->dev, "Cannot find the resource in
device\n");
> +               return PTR_ERR(base);
> +       }
> +
> +       drv_data->llcc_map = devm_regmap_init_mmio(dev, base,
&llcc_regmap_config);

Checkpatch.pl whines about this line being over 80 characters.

> +       if (IS_ERR(drv_data->llcc_map)) {
> +               dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
> +               return PTR_ERR(drv_data->llcc_map);
> +       }
> +
> +       regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
> +                   &num_banks);
> +
> +       num_banks &= LLCC_LB_CNT_MASK;
> +       num_banks >>= LLCC_LB_CNT_SHIFT;
> +       drv_data->num_banks = num_banks;
> +
> +       rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
> +                                 &drv_data->max_slices);
> +       if (rc) {
> +               dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
> +               devm_kfree(&pdev->dev, drv_data);

Remove this, since devm takes care of it.

> +               return rc;
> +       }
> +       drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32),
GFP_KERNEL);

Over 80 characters.

> +       if (!drv_data->offsets) {
> +               devm_kfree(&pdev->dev, drv_data);

Remove this too.

> +               return PTR_ERR(drv_data->offsets);
> +       }
> +
> +       drv_data->offsets[0] = 0x0;
> +       drv_data->offsets[1] = 0x80000;
> +       drv_data->offsets[2] = 0x100000;
> +       drv_data->offsets[3] = 0x180000;
> +       drv_data->b_off = 0x200000;

What's going on here? You carefully read num_banks out of the hardware, and
then plunk magic values into exactly 4 array slots? What if num_banks is
not exactly 4? It seems like these should at least be #defined (maybe a
loop and a #define for BANK_OFFSET_STRIDE, and a separate #define for
b_off?)

> +
> +       drv_data->llcc_slice_map =
kcalloc(BITS_TO_LONGS(drv_data->max_slices),
> +                                  sizeof(unsigned long), GFP_KERNEL);

Use devm_kcalloc.

> +
> +       if (!drv_data->llcc_slice_map) {
> +               devm_kfree(&pdev->dev, drv_data);

Remove this.

> +               return PTR_ERR(drv_data->llcc_slice_map);
> +       }
> +
> +       bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
> +       drv_data->slice_data = llcc_cfg;
> +       drv_data->llcc_config_data_sz = sz;
> +       mutex_init(&drv_data->slice_mutex);
> +       platform_set_drvdata(pdev, drv_data);
> +
> +       qcom_llcc_cfg_program(pdev);
> +
> +       return rc;
> +}
> +EXPORT_SYMBOL(qcom_llcc_probe);
> +
> +int qcom_llcc_remove(struct platform_device *pdev)
> +{
> +       static struct llcc_drv_data *drv_data;
> +
> +       drv_data = platform_get_drvdata(pdev);
> +
> +       mutex_destroy(&drv_data->slice_mutex);
> +       kfree(drv_data->llcc_slice_map);
> +       devm_kfree(&pdev->dev, drv_data);
> +       platform_set_drvdata(pdev, NULL);
> +
> +       return 0;
> +}

I think you can remove this whole function. The devm_kfree is unnecessary,
llcc_slice_map can be devm, platform_set_drvdata is unnecessary, and I
think you can do without mutex_destroy as well.

> +EXPORT_SYMBOL(qcom_llcc_remove);
> diff --git a/include/linux/soc/qcom/llcc-qcom.h
b/include/linux/soc/qcom/llcc-qcom.h
> new file mode 100644
> index 0000000..c408a8d
> --- /dev/null
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -0,0 +1,178 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LLCC_QCOM__
> +#define __LLCC_QCOM__
> +
> +/**
> + * llcc_slice_desc - Cache slice descriptor
> + * @llcc_slice_id: llcc slice id
> + * @llcc_slice_size: Size allocated for the llcc slice
> + * @dev: pointer to llcc device
> + */
> +struct llcc_slice_desc {
> +       int llcc_slice_id;
> +       size_t llcc_slice_size;
> +       struct device *dev;
> +};
> +
> +/**
> + * llcc_slice_config - Data associated with the llcc slice
> + * @name: name of the use case associated with the llcc slice
> + * @usecase_id: usecase id for which the llcc slice is used
> + * @slice_id: llcc slice id assigned to each slice
> + * @max_cap: maximum capacity of the llcc slice
> + * @priority: priority of the llcc slice
> + * @fixed_size: whether the llcc slice can grow beyond its size
> + * @bonus_ways: bonus ways associated with llcc slice
> + * @res_ways: reserved ways associated with llcc slice
> + * @cache_mode: mode of the llcce slice

s/llcce/llcc/

> + * @probe_target_ways: Probe only reserved and bonus ways on a cache miss
> + * @dis_cap_alloc: Disable capacity based allocation
> + * @retain_on_pc: Retain through power collapse
> + * @activate_on_init: activate the slice on init
> + */
> +struct llcc_slice_config {
> +       const char *name;
> +       int usecase_id;
> +       int slice_id;
> +       u32 max_cap;
> +       u32 priority;
> +       bool fixed_size;
> +       u32 bonus_ways;
> +       u32 res_ways;
> +       u32 cache_mode;
> +       u32 probe_target_ways;
> +       bool dis_cap_alloc;
> +       bool retain_on_pc;
> +       u32 activate_on_init;

bool?

> +};
> +
> +/**
> + * llcc_drv_data - Data associated with the llcc driver
> + * @llcc_map: regmap associated with the llcc device
> + * @slice_data: pointer to the data structure associated with slice
> + * @slice_mutex: mutex associated with each slice
> + * @llcc_config_data_sz: size of the config data table
> + * @max_slices: max slices as read from device tree
> + * @b_off: Offset of the broadcast bank
> + * @num_banks: Number of llcc banks
> + * @llcc_slice_map: Bit map to track the active slice ids
> + * @offsets: Pointer to the bank offsets array
> + */
> +
> +struct llcc_drv_data {
> +               struct regmap *llcc_map;
> +               const struct llcc_slice_config *slice_data;
> +               struct mutex slice_mutex;
> +               u32 llcc_config_data_sz;
> +               u32 max_slices;
> +               u32 b_off;

Personally I wish this were called something like broadcast_off or
bcast_off.

> +               u32 num_banks;
> +               unsigned long *llcc_slice_map;
> +               u32 *offsets;
> +};
> +
> +
> +#ifdef CONFIG_QCOM_LLCC

I think this won't compile correctly as a module. Use #if
IS_ENABLED(CONFIG_QCOM_LLCC).

> +/**
> + * llcc_slice_getd - get llcc slice descriptor
> + * @dev: Device pointer of the client
> + * @name: Name of the use case
> + */
> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char
*name);
> +
> +/**
> + * llcc_slice_putd - llcc slice descritpor
> + * @desc: Pointer to llcc slice descriptor
> + */
> +void llcc_slice_putd(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_get_slice_id - get slice id
> + * @desc: Pointer to llcc slice descriptor
> + */
> +int llcc_get_slice_id(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_get_slice_size - llcc slice size
> + * @desc: Pointer to llcc slice descriptor
> + */
> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_slice_activate - Activate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + */
> +int llcc_slice_activate(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_slice_deactivate - Deactivate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + */
> +int llcc_slice_deactivate(struct llcc_slice_desc *desc);
> +
> +/**
> + * qcom_llcc_probe - program the sct table
> + * @pdev: platform device pointer
> + * @table: soc sct table

Missing sz.

> + */
> +int qcom_llcc_probe(struct platform_device *pdev,
> +                     const struct llcc_slice_config *table, u32 sz);
> +/**
> + * qcom_llcc_remove - clean up llcc driver
> + * @pdev: platform driver pointer
> + */
> +int qcom_llcc_remove(struct platform_device *pdev);
> +#else
> +static inline struct llcc_slice_desc *llcc_slice_getd(struct device *dev,
> +                       const char *name)
> +{
> +       return NULL;
> +}
> +
> +static inline void llcc_slice_putd(struct llcc_slice_desc *desc)
> +{
> +
> +};
> +
> +static inline int llcc_get_slice_id(struct llcc_slice_desc *desc)
> +{
> +       return -EINVAL;
> +}
> +
> +static inline size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
> +{
> +       return 0;
> +}
> +static inline int llcc_slice_activate(struct llcc_slice_desc *desc)
> +{
> +       return -EINVAL;
> +}
> +
> +static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> +{
> +       return -EINVAL;
> +}
> +static inline int qcom_llcc_probe(struct platform_device *pdev,
> +                     const struct llcc_slice_config *table, u32 sz)
> +{
> +       return -ENODEV;
> +}
> +
> +static inline int qcom_llcc_remove(struct platform_device *pdev)
> +{
> +       return -ENODEV;
> +}
> +#endif
> +
> +#endif
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm"
in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Apologies that gmail seems to wrap lines of quoted text.
-Evan

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Evan Green]

Hi Rishabh,

On Tue, Mar 27, 2018 at 11:54 AM Rishabh Bhatnagar <rishabhb@codeaurora.org>
wrote:

> LLCC (Last Level Cache Controller) provides additional cache memory
> in the system. LLCC is partitioned into muliple slices and each
> slice getting its own priority, size, ID and other config parameters.
> LLCC driver programs these parameters for each slice. Clients that
> are assigned to use LLCC need to get information such size & ID of the
>    slice they get and activate or deactivate the slice as needed. LLCC
driver
> provides API interfaces for the clients to perform these operations.

> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>    drivers/soc/qcom/Kconfig           |  16 ++
>    drivers/soc/qcom/Makefile          |   2 +
>    drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>    drivers/soc/qcom/llcc-slice.c      | 454
+++++++++++++++++++++++++++++++++++++
>    include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>    5 files changed, 770 insertions(+)
>    create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>    create mode 100644 drivers/soc/qcom/llcc-slice.c
>    create mode 100644 include/linux/soc/qcom/llcc-qcom.h

> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index e050eb8..28237fc 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -21,6 +21,22 @@ config QCOM_GSBI
>              functions for connecting the underlying serial UART, SPI, and
I2C
>              devices to the output pins.

> +config QCOM_LLCC
> +       tristate "Qualcomm Technologies, Inc. LLCC driver"
> +       depends on ARCH_QCOM
> +       help
> +         Qualcomm Technologies, Inc. platform specific LLCC driver for
Last
> +         Level Cache. This provides interfaces to client's that use the
LLCC.
> +         Say yes here to enable LLCC slice driver.

It would be nice if the acronym decoding of Last Level Cache Controller
were actually spelled out here. You almost do it, but never quite
get the CC part.

> +
> +config QCOM_SDM845_LLCC
> +       tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
> +       depends on QCOM_LLCC
> +       help
> +         Say yes here to enable the LLCC driver for SDM845. This is
provides

s/is provides/provides/

> +         data required to configure LLCC so that clients can start using
the
> +         LLCC slices.
> +
>    config QCOM_MDT_LOADER
>           tristate
>           select QCOM_SCM
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index dcebf28..e16d6a2 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>    obj-$(CONFIG_QCOM_SMP2P)       += smp2p.o
>    obj-$(CONFIG_QCOM_SMSM)        += smsm.o
>    obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
> diff --git a/drivers/soc/qcom/llcc-sdm845.c
b/drivers/soc/qcom/llcc-sdm845.c
> new file mode 100644
> index 0000000..cd431d9
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-sdm845.c
> @@ -0,0 +1,120 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>

Remove this, it's unused.

> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/soc/qcom/llcc-qcom.h>
> +#include <linux/mfd/syscon.h>

Remove.

> +#include <linux/regmap.h>

Remove.

> +
> +
> +/*
> + * SCT entry contains of the following parameters

What does SCT stand for? Slender cat tree. Can you spell that out somewhere?

> + * name: Name of the client's use case for which the llcc slice is used
> + * uid: Unique id for the client's use case
> + * slice_id: llcc slice id for each client
> + * max_cap: The maximum capacity of the cache slice provided in KB
> + * priority: Priority of the client used to select victim line for
replacement

priority and fixed_size are out of order.

> + * fixed_size: Determine of the slice has a fixed capacity

s/Determine of/Determines if/

> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used
only if
> + *             it't not a reserved way.

it't. Might be more clear as "Bonus ways to be used by any slice, used only
if no reserved ways are available" (assuming that statement is correct?)

> + * res_ways: Reserved ways for the cache slice, the reserved ways cannot
be used
> + *           by any other client than the one its assigned to.
> + * cache_mode: Each slice operates as a cache, this controls the mode of
the
> + *             slice normal or TCM

slice: normal or TCM (what does TCM stand for?)

> + * probe_target_ways: Determines what ways to probe for access hit. When
> + *                    configured to 1 only bonus and reseved ways are
probed.

reserved

> + *                    when configured to 0 all ways in llcc are probed.

Capitalize When

> + * dis_cap_alloc: Disable capacity based allocation for a client
> + * retain_on_pc: If this bit is set and client has maitained active vote
> + *               then the ways assigned to this client are not flushed
on power
> + *               collapse.
> + * activate_on_init: Activate the slice immidiately after the SCT is
programmed

immediately

> + */
> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca,
rp, a) \
> +       {                                       \
> +               .name = n,                      \
> +               .usecase_id = uid,              \
> +               .slice_id = sid,                \
> +               .max_cap = mc,                  \
> +               .priority = p,                  \
> +               .fixed_size = fs,               \
> +               .bonus_ways = bway,             \
> +               .res_ways = rway,               \
> +               .cache_mode = cmod,             \
> +               .probe_target_ways = ptw,       \
> +               .dis_cap_alloc = dca,           \
> +               .retain_on_pc = rp,             \
> +               .activate_on_init = a,          \
> +       }
> +
> +
> +static struct llcc_slice_config sdm845_data[] =  {
> +       SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 1),
> +       SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1,
1, 0),
> +       SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0,
1, 1, 0),

You've got a leading zero on 0x0FC, but not on any other other shorter
values in this column of the table. Maybe remove? That would also get you
back under 80 characters for this line :)

> +       SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1,
0, 1),
> +       SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0,
1, 1, 0),
> +       SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1,
1, 0),
> +       SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1,
1, 0),
> +};

Lowercase hex values, please. The table is also sporadically adds extra
spaces between fields. It appears to be done in an effort to line up the
columns, but the columns don't really line up super well anyway, due to a
couple long strings. Not sure what the best strategy is for cleanup here,
maybe someone else feels like chiming in.


> +
> +
> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
> +{
> +       return qcom_llcc_probe(pdev, sdm845_data,
ARRAY_SIZE(sdm845_data));
> +}
> +
> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
> +       { .compatible = "qcom,sdm845-llcc", },
> +       { },
> +};
> +
> +static struct platform_driver sdm845_qcom_llcc_driver = {
> +       .driver = {
> +               .name = "sdm845-llcc",
> +               .owner = THIS_MODULE,
> +               .of_match_table = sdm845_qcom_llcc_of_match,
> +       },
> +       .probe = sdm845_qcom_llcc_probe,
> +       .remove = qcom_llcc_remove,
> +};
> +
> +static int __init sdm845_init_qcom_llcc_init(void)
> +{
> +       return platform_driver_register(&sdm845_qcom_llcc_driver);
> +}
> +module_init(sdm845_init_qcom_llcc_init);
> +
> +static void __exit sdm845_exit_qcom_llcc_exit(void)
> +{
> +       platform_driver_unregister(&sdm845_qcom_llcc_driver);
> +}
> +module_exit(sdm845_exit_qcom_llcc_exit);
> +
> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
> new file mode 100644
> index 0000000..6e86770
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-slice.c
> @@ -0,0 +1,454 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt)  "%s:" fmt, __func__
> +
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/mutex.h>
> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/soc/qcom/llcc-qcom.h>

Includes are generally alphabetized, yes?

> +
> +#define ACTIVATE                      0x1
> +#define DEACTIVATE                    0x2
> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
> +#define ACT_CTRL_ACT_TRIG             0x1
> +#define ACT_CTRL_OPCODE_SHIFT         0x1
> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
> +#define ATTR1_PRIORITY_SHIFT          0x4
> +#define ATTR1_MAX_CAP_SHIFT           0x10
> +#define ATTR0_RES_WAYS_MASK           0x00000fff
> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
> +#define ATR0_BONUS_WAYS_SHIFT         0x10
> +#define LLCC_STATUS_READ_DELAY 100
> +
> +#define CACHE_LINE_SIZE_SHIFT 6
> +
> +#define LLCC_COMMON_STATUS0            0x0003000C

lowercase hex.

> +#define LLCC_LB_CNT_MASK               0xf0000000
> +#define LLCC_LB_CNT_SHIFT              28
> +
> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
> +
> +
> +

too many newlines.

> +static const struct regmap_config llcc_regmap_config = {
> +               .reg_bits = 32,
> +               .reg_stride = 4,
> +               .val_bits = 32,
> +               .fast_io = true,
> +};
> +
> +
> +/* Get the slice entry by index */
> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev,
int n)
> +{
> +       struct of_phandle_args phargs;
> +       struct llcc_drv_data *drv;
> +       const struct llcc_slice_config *llcc_data_ptr;
> +       struct llcc_slice_desc *desc;
> +       struct platform_device *pdev;
> +       u32 sz, count;
> +
> +       if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
> +                                      "#cache-cells", n, &phargs)) {
> +               pr_err("can't parse \"cache-slices\" property\n");
> +               return ERR_PTR(-ENODEV);
> +       }
> +
> +       pdev = of_find_device_by_node(phargs.np);
> +       if (!pdev) {
> +               pr_err("Cannot find platform device from phandle\n");
> +               return ERR_PTR(-ENODEV);
> +       }
> +
> +       drv = platform_get_drvdata(pdev);
> +       if (!drv) {
> +               pr_err("cannot find platform driver data\n");
> +               return ERR_PTR(-EFAULT);
> +       }
> +
> +       llcc_data_ptr = drv->slice_data;
> +       sz = drv->llcc_config_data_sz;
> +       count = 0;
> +
> +       while (llcc_data_ptr && count < sz) {
> +               if (llcc_data_ptr->usecase_id == phargs.args[0])
> +                       break;
> +               llcc_data_ptr++;
> +               count++;
> +       }
> +
> +       if (llcc_data_ptr == NULL || count == sz) {
> +               pr_err("can't find %d usecase id\n", phargs.args[0]);
> +               return ERR_PTR(-ENODEV);
> +       }
> +
> +       desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
> +       if (!desc)
> +               return ERR_PTR(-ENOMEM);
> +
> +       desc->llcc_slice_id = llcc_data_ptr->slice_id;
> +       desc->llcc_slice_size = llcc_data_ptr->max_cap;
> +       desc->dev = &pdev->dev;
> +
> +       return desc;
> +}
> +
> +/**
> + * llcc_slice_getd - get llcc slice descriptor
> + * @dev: Device pointer of the client
> + * @name: Name of the use case
> + *
> + * A pointer to llcc slice descriptor will be returned on success and
> + * and error pointer is returned on failure
> + */
> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char
*name)
> +{
> +       struct device_node *np = dev->of_node;
> +       int index = 0;
> +       const char *slice_name;
> +       struct property *prop;
> +
> +       if (!np) {
> +               dev_err(dev, "%s() currently only supports DT\n",
__func__);
> +               return ERR_PTR(-ENOENT);
> +       }
> +
> +       if (!of_get_property(np, "cache-slice-names", NULL)) {
> +               dev_err(dev,
> +                       "%s() requires a \"cache-slice-names\"
property\n",
> +                       __func__);
> +               return ERR_PTR(-ENOENT);
> +       }
> +
> +       of_property_for_each_string(np, "cache-slice-names", prop,
slice_name) {
> +               if (!strcmp(name, slice_name))
> +                       break;
> +               index++;
> +       }
> +
> +       return llcc_slice_get_entry(dev, index);
> +}
> +EXPORT_SYMBOL(llcc_slice_getd);
> +
> +/**
> + * llcc_slice_putd - llcc slice descritpor
> + * @desc: Pointer to llcc slice descriptor
> + */
> +void llcc_slice_putd(struct llcc_slice_desc *desc)
> +{
> +       kfree(desc);
> +}
> +EXPORT_SYMBOL(llcc_slice_putd);
> +
> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
> +                               u32 act_ctrl_reg_val, u32 status)
> +{
> +       u32 act_ctrl_reg;
> +       u32 status_reg;
> +       u32 slice_status;
> +       unsigned long timeout;
> +
> +       act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
> +       status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
> +
> +       regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> +
> +       /* Make sure the activate trigger is applied before clearing it */
> +       mb();

I don't think you need this, because remap_write has a lock in it.

> +
> +       /* Clear the ACTIVE trigger */
> +       act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;

Maybe you should also OR in ACT_CTRL_ACT_TRIG in this function for the
write above. That would give this function some symmetry and remove the
duplication of having to set it in all of the places you call this function.

> +       regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> +
> +       timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
> +       while (time_before(jiffies, timeout)) {
> +               regmap_read(drv->llcc_map, status_reg, &slice_status);
> +               if (!(slice_status & status))
> +                       return 0;
> +       }
> +

I think theres a regmap_read_poll_timeout. Can you use that instead?

> +       return -ETIMEDOUT;
> +}
> +
> +/**
> + * llcc_slice_activate - Activate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_activate(struct llcc_slice_desc *desc)
> +{
> +       int rc = -EINVAL;
> +       u32 act_ctrl_val;
> +       struct llcc_drv_data *drv;
> +
> +       if (desc == NULL)
> +               return rc;
> +
> +       drv = dev_get_drvdata(desc->dev);
> +       if (!drv)
> +               return rc;
> +
> +       mutex_lock(&drv->slice_mutex);
> +       if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +               mutex_unlock(&drv->slice_mutex);
> +               return 0;
> +       }
> +
> +       act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
> +       act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +       rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +                                 DEACTIVATE);
> +
> +       __set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +       mutex_unlock(&drv->slice_mutex);
> +
> +       return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_activate);
> +
> +/**
> + * llcc_slice_deactivate - Deactivate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> +{
> +       u32 act_ctrl_val;
> +       int rc = -EINVAL;
> +       struct llcc_drv_data *drv;
> +
> +       if (desc == NULL)
> +               return rc;
> +
> +       drv = dev_get_drvdata(desc->dev);
> +       if (!drv)
> +               return rc;
> +
> +       mutex_lock(&drv->slice_mutex);
> +       if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +               mutex_unlock(&drv->slice_mutex);
> +               return 0;
> +       }
> +       act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE <<
ACT_CTRL_OPCODE_SHIFT;
> +       act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +       rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +                                 ACTIVATE);
> +
> +       __clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +       mutex_unlock(&drv->slice_mutex);
> +
> +       return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_deactivate);
> +
> +/**
> + * llcc_get_slice_id - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and a negative errno will
> + * be returned on error
> + */
> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
> +{
> +       if (!desc)
> +               return -EINVAL;
> +
> +       return desc->llcc_slice_id;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_id);
> +
> +/**
> + * llcc_get_slice_size - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and zero will returned on
> + * error
> + */
> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
> +{
> +       if (!desc)
> +               return 0;
> +
> +       return desc->llcc_slice_size;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_size);
> +
> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
> +{
> +       int i;
> +       u32 attr1_cfg;
> +       u32 attr0_cfg;
> +       u32 attr1_val;
> +       u32 attr0_val;
> +       u32 max_cap_cacheline;
> +       u32 sz;
> +       const struct llcc_slice_config *llcc_table;
> +       struct llcc_slice_desc desc;
> +       struct llcc_drv_data *drv = platform_get_drvdata(pdev);
> +       u32 b_off = drv->b_off;
> +
> +       sz = drv->llcc_config_data_sz;
> +       llcc_table = drv->slice_data;
> +
> +       for (i = 0; i < sz; i++) {
> +               attr1_cfg = b_off +
LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
> +               attr0_cfg = b_off +
LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
> +
> +               attr1_val = llcc_table[i].cache_mode;
> +               attr1_val |= (llcc_table[i].probe_target_ways <<
> +                               ATTR1_PROBE_TARGET_WAYS_SHIFT);
> +               attr1_val |= (llcc_table[i].fixed_size <<
> +                               ATTR1_FIXED_SIZE_SHIFT);
> +               attr1_val |= (llcc_table[i].priority <<
ATTR1_PRIORITY_SHIFT);
> +
> +               max_cap_cacheline =
MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
> +
> +               /* LLCC instances can vary for each target.
> +                * The SW writes to broadcast register which gets
propagated
> +                * to each llcc instace (llcc0,.. llccN).
> +                * Since the size of the memory is divided equally
amongst the
> +                * llcc instances, we need to configure the max cap
accordingly.
> +                */
> +               max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
> +               max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
> +               attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
> +
> +               attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
> +               attr0_val |= llcc_table[i].bonus_ways <<
ATR0_BONUS_WAYS_SHIFT;
> +
> +               regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
> +               regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
> +
> +               /* Make sure that the SCT is programmed before activating
*/
> +               mb();

Again, I don't think this is needed.

> +
> +               if (llcc_table[i].activate_on_init) {
> +                       desc.llcc_slice_id = llcc_table[i].slice_id;
> +                       desc.dev = &pdev->dev;
> +                       if (llcc_slice_activate(&desc)) {
> +                               pr_err("activate slice id: %d timed
out\n",
> +                                               desc.llcc_slice_id);
> +                       }
> +               }
> +       }
> +}
> +
> +int qcom_llcc_probe(struct platform_device *pdev,
> +                     const struct llcc_slice_config *llcc_cfg, u32 sz)
> +{
> +       int rc = 0;
> +       u32 num_banks = 0;
> +       struct device *dev = &pdev->dev;
> +       static struct llcc_drv_data *drv_data;
> +       struct resource *res;
> +       void __iomem *base;
> +
> +       drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
> +       if (!drv_data)
> +               return PTR_ERR(drv_data);
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       base = devm_ioremap_resource(&pdev->dev, res);
> +       if (IS_ERR(base)) {
> +               dev_err(&pdev->dev, "Cannot find the resource in
device\n");
> +               return PTR_ERR(base);
> +       }
> +
> +       drv_data->llcc_map = devm_regmap_init_mmio(dev, base,
&llcc_regmap_config);

Checkpatch.pl whines about this line being over 80 characters.

> +       if (IS_ERR(drv_data->llcc_map)) {
> +               dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
> +               return PTR_ERR(drv_data->llcc_map);
> +       }
> +
> +       regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
> +                   &num_banks);
> +
> +       num_banks &= LLCC_LB_CNT_MASK;
> +       num_banks >>= LLCC_LB_CNT_SHIFT;
> +       drv_data->num_banks = num_banks;
> +
> +       rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
> +                                 &drv_data->max_slices);
> +       if (rc) {
> +               dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
> +               devm_kfree(&pdev->dev, drv_data);

Remove this, since devm takes care of it.

> +               return rc;
> +       }
> +       drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32),
GFP_KERNEL);

Over 80 characters.

> +       if (!drv_data->offsets) {
> +               devm_kfree(&pdev->dev, drv_data);

Remove this too.

> +               return PTR_ERR(drv_data->offsets);
> +       }
> +
> +       drv_data->offsets[0] = 0x0;
> +       drv_data->offsets[1] = 0x80000;
> +       drv_data->offsets[2] = 0x100000;
> +       drv_data->offsets[3] = 0x180000;
> +       drv_data->b_off = 0x200000;

What's going on here? You carefully read num_banks out of the hardware, and
then plunk magic values into exactly 4 array slots? What if num_banks is
not exactly 4? It seems like these should at least be #defined (maybe a
loop and a #define for BANK_OFFSET_STRIDE, and a separate #define for
b_off?)

> +
> +       drv_data->llcc_slice_map =
kcalloc(BITS_TO_LONGS(drv_data->max_slices),
> +                                  sizeof(unsigned long), GFP_KERNEL);

Use devm_kcalloc.

> +
> +       if (!drv_data->llcc_slice_map) {
> +               devm_kfree(&pdev->dev, drv_data);

Remove this.

> +               return PTR_ERR(drv_data->llcc_slice_map);
> +       }
> +
> +       bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
> +       drv_data->slice_data = llcc_cfg;
> +       drv_data->llcc_config_data_sz = sz;
> +       mutex_init(&drv_data->slice_mutex);
> +       platform_set_drvdata(pdev, drv_data);
> +
> +       qcom_llcc_cfg_program(pdev);
> +
> +       return rc;
> +}
> +EXPORT_SYMBOL(qcom_llcc_probe);
> +
> +int qcom_llcc_remove(struct platform_device *pdev)
> +{
> +       static struct llcc_drv_data *drv_data;
> +
> +       drv_data = platform_get_drvdata(pdev);
> +
> +       mutex_destroy(&drv_data->slice_mutex);
> +       kfree(drv_data->llcc_slice_map);
> +       devm_kfree(&pdev->dev, drv_data);
> +       platform_set_drvdata(pdev, NULL);
> +
> +       return 0;
> +}

I think you can remove this whole function. The devm_kfree is unnecessary,
llcc_slice_map can be devm, platform_set_drvdata is unnecessary, and I
think you can do without mutex_destroy as well.

> +EXPORT_SYMBOL(qcom_llcc_remove);
> diff --git a/include/linux/soc/qcom/llcc-qcom.h
b/include/linux/soc/qcom/llcc-qcom.h
> new file mode 100644
> index 0000000..c408a8d
> --- /dev/null
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -0,0 +1,178 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LLCC_QCOM__
> +#define __LLCC_QCOM__
> +
> +/**
> + * llcc_slice_desc - Cache slice descriptor
> + * @llcc_slice_id: llcc slice id
> + * @llcc_slice_size: Size allocated for the llcc slice
> + * @dev: pointer to llcc device
> + */
> +struct llcc_slice_desc {
> +       int llcc_slice_id;
> +       size_t llcc_slice_size;
> +       struct device *dev;
> +};
> +
> +/**
> + * llcc_slice_config - Data associated with the llcc slice
> + * @name: name of the use case associated with the llcc slice
> + * @usecase_id: usecase id for which the llcc slice is used
> + * @slice_id: llcc slice id assigned to each slice
> + * @max_cap: maximum capacity of the llcc slice
> + * @priority: priority of the llcc slice
> + * @fixed_size: whether the llcc slice can grow beyond its size
> + * @bonus_ways: bonus ways associated with llcc slice
> + * @res_ways: reserved ways associated with llcc slice
> + * @cache_mode: mode of the llcce slice

s/llcce/llcc/

> + * @probe_target_ways: Probe only reserved and bonus ways on a cache miss
> + * @dis_cap_alloc: Disable capacity based allocation
> + * @retain_on_pc: Retain through power collapse
> + * @activate_on_init: activate the slice on init
> + */
> +struct llcc_slice_config {
> +       const char *name;
> +       int usecase_id;
> +       int slice_id;
> +       u32 max_cap;
> +       u32 priority;
> +       bool fixed_size;
> +       u32 bonus_ways;
> +       u32 res_ways;
> +       u32 cache_mode;
> +       u32 probe_target_ways;
> +       bool dis_cap_alloc;
> +       bool retain_on_pc;
> +       u32 activate_on_init;

bool?

> +};
> +
> +/**
> + * llcc_drv_data - Data associated with the llcc driver
> + * @llcc_map: regmap associated with the llcc device
> + * @slice_data: pointer to the data structure associated with slice
> + * @slice_mutex: mutex associated with each slice
> + * @llcc_config_data_sz: size of the config data table
> + * @max_slices: max slices as read from device tree
> + * @b_off: Offset of the broadcast bank
> + * @num_banks: Number of llcc banks
> + * @llcc_slice_map: Bit map to track the active slice ids
> + * @offsets: Pointer to the bank offsets array
> + */
> +
> +struct llcc_drv_data {
> +               struct regmap *llcc_map;
> +               const struct llcc_slice_config *slice_data;
> +               struct mutex slice_mutex;
> +               u32 llcc_config_data_sz;
> +               u32 max_slices;
> +               u32 b_off;

Personally I wish this were called something like broadcast_off or
bcast_off.

> +               u32 num_banks;
> +               unsigned long *llcc_slice_map;
> +               u32 *offsets;
> +};
> +
> +
> +#ifdef CONFIG_QCOM_LLCC

I think this won't compile correctly as a module. Use #if
IS_ENABLED(CONFIG_QCOM_LLCC).

> +/**
> + * llcc_slice_getd - get llcc slice descriptor
> + * @dev: Device pointer of the client
> + * @name: Name of the use case
> + */
> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char
*name);
> +
> +/**
> + * llcc_slice_putd - llcc slice descritpor
> + * @desc: Pointer to llcc slice descriptor
> + */
> +void llcc_slice_putd(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_get_slice_id - get slice id
> + * @desc: Pointer to llcc slice descriptor
> + */
> +int llcc_get_slice_id(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_get_slice_size - llcc slice size
> + * @desc: Pointer to llcc slice descriptor
> + */
> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_slice_activate - Activate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + */
> +int llcc_slice_activate(struct llcc_slice_desc *desc);
> +
> +/**
> + * llcc_slice_deactivate - Deactivate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + */
> +int llcc_slice_deactivate(struct llcc_slice_desc *desc);
> +
> +/**
> + * qcom_llcc_probe - program the sct table
> + * @pdev: platform device pointer
> + * @table: soc sct table

Missing sz.

> + */
> +int qcom_llcc_probe(struct platform_device *pdev,
> +                     const struct llcc_slice_config *table, u32 sz);
> +/**
> + * qcom_llcc_remove - clean up llcc driver
> + * @pdev: platform driver pointer
> + */
> +int qcom_llcc_remove(struct platform_device *pdev);
> +#else
> +static inline struct llcc_slice_desc *llcc_slice_getd(struct device *dev,
> +                       const char *name)
> +{
> +       return NULL;
> +}
> +
> +static inline void llcc_slice_putd(struct llcc_slice_desc *desc)
> +{
> +
> +};
> +
> +static inline int llcc_get_slice_id(struct llcc_slice_desc *desc)
> +{
> +       return -EINVAL;
> +}
> +
> +static inline size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
> +{
> +       return 0;
> +}
> +static inline int llcc_slice_activate(struct llcc_slice_desc *desc)
> +{
> +       return -EINVAL;
> +}
> +
> +static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> +{
> +       return -EINVAL;
> +}
> +static inline int qcom_llcc_probe(struct platform_device *pdev,
> +                     const struct llcc_slice_config *table, u32 sz)
> +{
> +       return -ENODEV;
> +}
> +
> +static inline int qcom_llcc_remove(struct platform_device *pdev)
> +{
> +       return -ENODEV;
> +}
> +#endif
> +
> +#endif
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm"
in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Apologies that gmail seems to wrap lines of quoted text.
-Evan

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[Stanimir Varbanov]

Hi,

On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
> LLCC (Last Level Cache Controller) provides additional cache memory
> in the system. LLCC is partitioned into muliple slices and each
> slice getting its own priority, size, ID and other config parameters.
> LLCC driver programs these parameters for each slice. Clients that
> are assigned to use LLCC need to get information such size & ID of the
>  slice they get and activate or deactivate the slice as needed. LLCC driver
> provides API interfaces for the clients to perform these operations.
> 
> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/soc/qcom/Kconfig           |  16 ++
>  drivers/soc/qcom/Makefile          |   2 +
>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>  drivers/soc/qcom/llcc-slice.c      | 454 +++++++++++++++++++++++++++++++++++++

I'd name it just llcc.c, slice suffix didn't add any value.

>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>  5 files changed, 770 insertions(+)
>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
> 
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index e050eb8..28237fc 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -21,6 +21,22 @@ config QCOM_GSBI
>            functions for connecting the underlying serial UART, SPI, and I2C
>            devices to the output pins.
> 
> +config QCOM_LLCC
> +	tristate "Qualcomm Technologies, Inc. LLCC driver"
> +	depends on ARCH_QCOM
> +	help
> +	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
> +	  Level Cache. This provides interfaces to client's that use the LLCC.
> +	  Say yes here to enable LLCC slice driver.
> +
> +config QCOM_SDM845_LLCC
> +	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
> +	depends on QCOM_LLCC
> +	help
> +	  Say yes here to enable the LLCC driver for SDM845. This is provides
> +	  data required to configure LLCC so that clients can start using the
> +	  LLCC slices.
> +
>  config QCOM_MDT_LOADER
>  	tristate
>  	select QCOM_SCM
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index dcebf28..e16d6a2 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>  obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
> diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c
> new file mode 100644
> index 0000000..cd431d9
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-sdm845.c
> @@ -0,0 +1,120 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/soc/qcom/llcc-qcom.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +
> +/*
> + * SCT entry contains of the following parameters
> + * name: Name of the client's use case for which the llcc slice is used
> + * uid: Unique id for the client's use case
> + * slice_id: llcc slice id for each client
> + * max_cap: The maximum capacity of the cache slice provided in KB
> + * priority: Priority of the client used to select victim line for replacement
> + * fixed_size: Determine of the slice has a fixed capacity
> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if
> + *             it't not a reserved way.
> + * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used
> + *           by any other client than the one its assigned to.
> + * cache_mode: Each slice operates as a cache, this controls the mode of the
> + *             slice normal or TCM
> + * probe_target_ways: Determines what ways to probe for access hit. When
> + *                    configured to 1 only bonus and reseved ways are probed.
> + *                    when configured to 0 all ways in llcc are probed.
> + * dis_cap_alloc: Disable capacity based allocation for a client
> + * retain_on_pc: If this bit is set and client has maitained active vote
> + *               then the ways assigned to this client are not flushed on power
> + *               collapse.
> + * activate_on_init: Activate the slice immidiately after the SCT is programmed
> + */
> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \
> +	{					\
> +		.name = n,			\
> +		.usecase_id = uid,		\
> +		.slice_id = sid,		\
> +		.max_cap = mc,			\
> +		.priority = p,			\
> +		.fixed_size = fs,		\
> +		.bonus_ways = bway,		\
> +		.res_ways = rway,		\
> +		.cache_mode = cmod,		\
> +		.probe_target_ways = ptw,	\
> +		.dis_cap_alloc = dca,		\
> +		.retain_on_pc = rp,		\
> +		.activate_on_init = a,		\
> +	}
> +
> +
> +static struct llcc_slice_config sdm845_data[] =  {
> +	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 1),
> +	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 0),
> +	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 1),
> +	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +};
> +
> +
> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
> +{
> +	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));

I think having separate driver just for this config structure is
pointless. Please move this in llcc driver and select the configuration
based on compatible string.

On first sight the driver has many coding style issues and flooding err
messages which should be dropped. Did you run checkpatch?

> +}
> +
> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
> +	{ .compatible = "qcom,sdm845-llcc", },
> +	{ },
> +};
> +
> +static struct platform_driver sdm845_qcom_llcc_driver = {
> +	.driver = {
> +		.name = "sdm845-llcc",
> +		.owner = THIS_MODULE,
> +		.of_match_table = sdm845_qcom_llcc_of_match,
> +	},
> +	.probe = sdm845_qcom_llcc_probe,
> +	.remove = qcom_llcc_remove,
> +};
> +
> +static int __init sdm845_init_qcom_llcc_init(void)
> +{
> +	return platform_driver_register(&sdm845_qcom_llcc_driver);
> +}
> +module_init(sdm845_init_qcom_llcc_init);
> +
> +static void __exit sdm845_exit_qcom_llcc_exit(void)
> +{
> +	platform_driver_unregister(&sdm845_qcom_llcc_driver);
> +}
> +module_exit(sdm845_exit_qcom_llcc_exit);
> +
> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
> new file mode 100644
> index 0000000..6e86770
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-slice.c
> @@ -0,0 +1,454 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt)  "%s:" fmt, __func__

drop this and use dev_xxx instead.

> +
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/mutex.h>
> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/soc/qcom/llcc-qcom.h>
> +
> +#define ACTIVATE                      0x1
> +#define DEACTIVATE                    0x2
> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
> +#define ACT_CTRL_ACT_TRIG             0x1
> +#define ACT_CTRL_OPCODE_SHIFT         0x1
> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
> +#define ATTR1_PRIORITY_SHIFT          0x4
> +#define ATTR1_MAX_CAP_SHIFT           0x10
> +#define ATTR0_RES_WAYS_MASK           0x00000fff
> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
> +#define ATR0_BONUS_WAYS_SHIFT         0x10
> +#define LLCC_STATUS_READ_DELAY 100
> +
> +#define CACHE_LINE_SIZE_SHIFT 6
> +
> +#define LLCC_COMMON_STATUS0		0x0003000C
> +#define LLCC_LB_CNT_MASK		0xf0000000
> +#define LLCC_LB_CNT_SHIFT		28
> +
> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
> +
> +
> +
> +static const struct regmap_config llcc_regmap_config = {
> +		.reg_bits = 32,
> +		.reg_stride = 4,
> +		.val_bits = 32,
> +		.fast_io = true,
> +};
> +
> +
> +/* Get the slice entry by index */
> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev, int n)

drop this *slice* word from function names

> +{
> +	struct of_phandle_args phargs;
> +	struct llcc_drv_data *drv;
> +	const struct llcc_slice_config *llcc_data_ptr;
> +	struct llcc_slice_desc *desc;
> +	struct platform_device *pdev;
> +	u32 sz, count;
> +
> +	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
> +				       "#cache-cells", n, &phargs)) {
> +		pr_err("can't parse \"cache-slices\" property\n");

drop all pr_err here and below.

> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	pdev = of_find_device_by_node(phargs.np);
> +	if (!pdev) {
> +		pr_err("Cannot find platform device from phandle\n");
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	drv = platform_get_drvdata(pdev);
> +	if (!drv) {
> +		pr_err("cannot find platform driver data\n");
> +		return ERR_PTR(-EFAULT);
> +	}
> +
> +	llcc_data_ptr = drv->slice_data;
> +	sz = drv->llcc_config_data_sz;
> +	count = 0;
> +
> +	while (llcc_data_ptr && count < sz) {
> +		if (llcc_data_ptr->usecase_id == phargs.args[0])
> +			break;
> +		llcc_data_ptr++;
> +		count++;
> +	}
> +
> +	if (llcc_data_ptr == NULL || count == sz) {
> +		pr_err("can't find %d usecase id\n", phargs.args[0]);
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
> +	if (!desc)
> +		return ERR_PTR(-ENOMEM);
> +
> +	desc->llcc_slice_id = llcc_data_ptr->slice_id;
> +	desc->llcc_slice_size = llcc_data_ptr->max_cap;
> +	desc->dev = &pdev->dev;
> +
> +	return desc;
> +}
> +
> +/**
> + * llcc_slice_getd - get llcc slice descriptor
> + * @dev: Device pointer of the client
> + * @name: Name of the use case
> + *
> + * A pointer to llcc slice descriptor will be returned on success and
> + * and error pointer is returned on failure
> + */
> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char *name)
> +{
> +	struct device_node *np = dev->of_node;
> +	int index = 0;
> +	const char *slice_name;
> +	struct property *prop;
> +
> +	if (!np) {
> +		dev_err(dev, "%s() currently only supports DT\n", __func__);
> +		return ERR_PTR(-ENOENT);
> +	}
> +
> +	if (!of_get_property(np, "cache-slice-names", NULL)) {
> +		dev_err(dev,
> +			"%s() requires a \"cache-slice-names\" property\n",
> +			__func__);
> +		return ERR_PTR(-ENOENT);
> +	}
> +
> +	of_property_for_each_string(np, "cache-slice-names", prop, slice_name) {
> +		if (!strcmp(name, slice_name))
> +			break;
> +		index++;
> +	}
> +
> +	return llcc_slice_get_entry(dev, index);
> +}
> +EXPORT_SYMBOL(llcc_slice_getd);

should be EXPORT_SYMBOL_GPL here and on all other places.

> +
> +/**
> + * llcc_slice_putd - llcc slice descritpor
> + * @desc: Pointer to llcc slice descriptor
> + */
> +void llcc_slice_putd(struct llcc_slice_desc *desc)
> +{
> +	kfree(desc);
> +}
> +EXPORT_SYMBOL(llcc_slice_putd);
> +
> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
> +				u32 act_ctrl_reg_val, u32 status)
> +{
> +	u32 act_ctrl_reg;
> +	u32 status_reg;
> +	u32 slice_status;
> +	unsigned long timeout;
> +
> +	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
> +	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
> +
> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);

check for regmap_write error? Infact you don't check for regmap errors
at all.

> +
> +	/* Make sure the activate trigger is applied before clearing it */
> +	mb();
> +
> +	/* Clear the ACTIVE trigger */
> +	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> +
> +	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
> +	while (time_before(jiffies, timeout)) {
> +		regmap_read(drv->llcc_map, status_reg, &slice_status);
> +		if (!(slice_status & status))
> +			return 0;
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +/**
> + * llcc_slice_activate - Activate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_activate(struct llcc_slice_desc *desc)
> +{
> +	int rc = -EINVAL;

please use 'ret' for variable name, here and on all other places.

> +	u32 act_ctrl_val;
> +	struct llcc_drv_data *drv;
> +
> +	if (desc == NULL)
> +		return rc;
> +
> +	drv = dev_get_drvdata(desc->dev);
> +	if (!drv)
> +		return rc;

return -EINVAL;

> +
> +	mutex_lock(&drv->slice_mutex);
> +	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +		mutex_unlock(&drv->slice_mutex);
> +		return 0;
> +	}
> +
> +	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +				  DEACTIVATE);
> +
> +	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +	mutex_unlock(&drv->slice_mutex);
> +
> +	return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_activate);
> +
> +/**
> + * llcc_slice_deactivate - Deactivate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)

just llcc_activate

> +{
> +	u32 act_ctrl_val;
> +	int rc = -EINVAL;
> +	struct llcc_drv_data *drv;
> +
> +	if (desc == NULL)
> +		return rc;
> +
> +	drv = dev_get_drvdata(desc->dev);
> +	if (!drv)
> +		return rc;
> +
> +	mutex_lock(&drv->slice_mutex);
> +	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +		mutex_unlock(&drv->slice_mutex);
> +		return 0;
> +	}
> +	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +				  ACTIVATE);
> +
> +	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +	mutex_unlock(&drv->slice_mutex);
> +
> +	return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_deactivate);
> +
> +/**
> + * llcc_get_slice_id - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and a negative errno will
> + * be returned on error
> + */
> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
> +{
> +	if (!desc)
> +		return -EINVAL;
> +
> +	return desc->llcc_slice_id;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_id);
> +
> +/**
> + * llcc_get_slice_size - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and zero will returned on
> + * error
> + */
> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
> +{
> +	if (!desc)
> +		return 0;
> +
> +	return desc->llcc_slice_size;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_size);
> +
> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
> +{
> +	int i;
> +	u32 attr1_cfg;
> +	u32 attr0_cfg;
> +	u32 attr1_val;
> +	u32 attr0_val;
> +	u32 max_cap_cacheline;
> +	u32 sz;
> +	const struct llcc_slice_config *llcc_table;
> +	struct llcc_slice_desc desc;
> +	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
> +	u32 b_off = drv->b_off;
> +
> +	sz = drv->llcc_config_data_sz;
> +	llcc_table = drv->slice_data;
> +
> +	for (i = 0; i < sz; i++) {
> +		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
> +		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
> +
> +		attr1_val = llcc_table[i].cache_mode;
> +		attr1_val |= (llcc_table[i].probe_target_ways <<
> +				ATTR1_PROBE_TARGET_WAYS_SHIFT);

braces are not needed, here and below.

> +		attr1_val |= (llcc_table[i].fixed_size <<
> +				ATTR1_FIXED_SIZE_SHIFT);
> +		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
> +
> +		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
> +
> +		/* LLCC instances can vary for each target.
> +		 * The SW writes to broadcast register which gets propagated
> +		 * to each llcc instace (llcc0,.. llccN).
> +		 * Since the size of the memory is divided equally amongst the
> +		 * llcc instances, we need to configure the max cap accordingly.
> +		 */
> +		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
> +		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
> +		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
> +
> +		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
> +		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
> +
> +		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
> +		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
> +
> +		/* Make sure that the SCT is programmed before activating */
> +		mb();

shouldn't this be wmb()?

> +
> +		if (llcc_table[i].activate_on_init) {
> +			desc.llcc_slice_id = llcc_table[i].slice_id;
> +			desc.dev = &pdev->dev;
> +			if (llcc_slice_activate(&desc)) {
> +				pr_err("activate slice id: %d timed out\n",
> +						desc.llcc_slice_id);

Make the fucntion to return int and propagate the error. And please drop
all pr_err.

> +			}
> +		}
> +	}
> +}
> +
> +int qcom_llcc_probe(struct platform_device *pdev,
> +		      const struct llcc_slice_config *llcc_cfg, u32 sz)
> +{
> +	int rc = 0;
> +	u32 num_banks = 0;
> +	struct device *dev = &pdev->dev;
> +	static struct llcc_drv_data *drv_data;

static ??

> +	struct resource *res;
> +	void __iomem *base;
> +
> +	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
> +	if (!drv_data)
> +		return PTR_ERR(drv_data);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base)) {
> +		dev_err(&pdev->dev, "Cannot find the resource in device\n");

this error message is not needed.

> +		return PTR_ERR(base);
> +	}
> +
> +	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, &llcc_regmap_config);
> +	if (IS_ERR(drv_data->llcc_map)) {
> +		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");

again not needed.

> +		return PTR_ERR(drv_data->llcc_map);
> +	}
> +
> +	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
> +		    &num_banks);
> +
> +	num_banks &= LLCC_LB_CNT_MASK;
> +	num_banks >>= LLCC_LB_CNT_SHIFT;
> +	drv_data->num_banks = num_banks;
> +
> +	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
> +				  &drv_data->max_slices);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");

and this too.

> +		devm_kfree(&pdev->dev, drv_data);
> +		return rc;
> +	}

need blank line here.

> +	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), GFP_KERNEL);
> +	if (!drv_data->offsets) {
> +		devm_kfree(&pdev->dev, drv_data);
> +		return PTR_ERR(drv_data->offsets);
> +	}
> +
> +	drv_data->offsets[0] = 0x0;
> +	drv_data->offsets[1] = 0x80000;
> +	drv_data->offsets[2] = 0x100000;
> +	drv_data->offsets[3] = 0x180000;
> +	drv_data->b_off = 0x200000;

shouln't this be SoC or llcc version specific?

> +
> +	drv_data->llcc_slice_map = kcalloc(BITS_TO_LONGS(drv_data->max_slices),
> +				   sizeof(unsigned long), GFP_KERNEL);
> +
> +	if (!drv_data->llcc_slice_map) {
> +		devm_kfree(&pdev->dev, drv_data);
> +		return PTR_ERR(drv_data->llcc_slice_map);
> +	}
> +
> +	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
> +	drv_data->slice_data = llcc_cfg;
> +	drv_data->llcc_config_data_sz = sz;
> +	mutex_init(&drv_data->slice_mutex);
> +	platform_set_drvdata(pdev, drv_data);
> +
> +	qcom_llcc_cfg_program(pdev);
> +
> +	return rc;
> +}
> +EXPORT_SYMBOL(qcom_llcc_probe);
> +
> +int qcom_llcc_remove(struct platform_device *pdev)
> +{
> +	static struct llcc_drv_data *drv_data;
> +
> +	drv_data = platform_get_drvdata(pdev);
> +
> +	mutex_destroy(&drv_data->slice_mutex);
> +	kfree(drv_data->llcc_slice_map);
> +	devm_kfree(&pdev->dev, drv_data);
> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(qcom_llcc_remove);
> diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> new file mode 100644
> index 0000000..c408a8d
> --- /dev/null
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -0,0 +1,178 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LLCC_QCOM__
> +#define __LLCC_QCOM__
> +
> +/**
> + * llcc_slice_desc - Cache slice descriptor
> + * @llcc_slice_id: llcc slice id
> + * @llcc_slice_size: Size allocated for the llcc slice
> + * @dev: pointer to llcc device
> + */
> +struct llcc_slice_desc {

'llcc_desc' is enough.

> +	int llcc_slice_id;

'slice_id' or even better 'id'.

> +	size_t llcc_slice_size;

'slice_size' or just 'size'

> +	struct device *dev;
> +};
> +
> +/**
> + * llcc_slice_config - Data associated with the llcc slice
> + * @name: name of the use case associated with the llcc slice
> + * @usecase_id: usecase id for which the llcc slice is used
> + * @slice_id: llcc slice id assigned to each slice
> + * @max_cap: maximum capacity of the llcc slice
> + * @priority: priority of the llcc slice
> + * @fixed_size: whether the llcc slice can grow beyond its size
> + * @bonus_ways: bonus ways associated with llcc slice
> + * @res_ways: reserved ways associated with llcc slice
> + * @cache_mode: mode of the llcce slice
> + * @probe_target_ways: Probe only reserved and bonus ways on a cache miss
> + * @dis_cap_alloc: Disable capacity based allocation
> + * @retain_on_pc: Retain through power collapse
> + * @activate_on_init: activate the slice on init
> + */
> +struct llcc_slice_config {

Once you move struct llcc_slice_config sdm845_data in llcc.c this
structure must not be exported.

> +	const char *name;
> +	int usecase_id;

unsigned int?

> +	int slice_id;

unsingned int?

> +	u32 max_cap;
> +	u32 priority;
> +	bool fixed_size;
> +	u32 bonus_ways;
> +	u32 res_ways;
> +	u32 cache_mode;
> +	u32 probe_target_ways;
> +	bool dis_cap_alloc;
> +	bool retain_on_pc;
> +	u32 activate_on_init;
> +};
> +
> +/**
> + * llcc_drv_data - Data associated with the llcc driver
> + * @llcc_map: regmap associated with the llcc device
> + * @slice_data: pointer to the data structure associated with slice

should be better 'data structure for slice configuration'?

> + * @slice_mutex: mutex associated with each slice
> + * @llcc_config_data_sz: size of the config data table
> + * @max_slices: max slices as read from device tree
> + * @b_off: Offset of the broadcast bank
> + * @num_banks: Number of llcc banks
> + * @llcc_slice_map: Bit map to track the active slice ids
> + * @offsets: Pointer to the bank offsets array
> + */
> +
> +struct llcc_drv_data {
> +		struct regmap *llcc_map;

s/llcc_map/regmap

> +		const struct llcc_slice_config *slice_data;

s/slice_data/cfg

> +		struct mutex slice_mutex;

just 'lock'

> +		u32 llcc_config_data_sz;

cfg_size?

> +		u32 max_slices;
> +		u32 b_off;
> +		u32 num_banks;
> +		unsigned long *llcc_slice_map;

only 'bitmap'?

> +		u32 *offsets;
> +};
> +
> +

<cut>

-- 
regards,
Stan

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Stanimir Varbanov]

Hi,

On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
> LLCC (Last Level Cache Controller) provides additional cache memory
> in the system. LLCC is partitioned into muliple slices and each
> slice getting its own priority, size, ID and other config parameters.
> LLCC driver programs these parameters for each slice. Clients that
> are assigned to use LLCC need to get information such size & ID of the
>  slice they get and activate or deactivate the slice as needed. LLCC driver
> provides API interfaces for the clients to perform these operations.
> 
> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  drivers/soc/qcom/Kconfig           |  16 ++
>  drivers/soc/qcom/Makefile          |   2 +
>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>  drivers/soc/qcom/llcc-slice.c      | 454 +++++++++++++++++++++++++++++++++++++

I'd name it just llcc.c, slice suffix didn't add any value.

>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>  5 files changed, 770 insertions(+)
>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
> 
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index e050eb8..28237fc 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -21,6 +21,22 @@ config QCOM_GSBI
>            functions for connecting the underlying serial UART, SPI, and I2C
>            devices to the output pins.
> 
> +config QCOM_LLCC
> +	tristate "Qualcomm Technologies, Inc. LLCC driver"
> +	depends on ARCH_QCOM
> +	help
> +	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
> +	  Level Cache. This provides interfaces to client's that use the LLCC.
> +	  Say yes here to enable LLCC slice driver.
> +
> +config QCOM_SDM845_LLCC
> +	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
> +	depends on QCOM_LLCC
> +	help
> +	  Say yes here to enable the LLCC driver for SDM845. This is provides
> +	  data required to configure LLCC so that clients can start using the
> +	  LLCC slices.
> +
>  config QCOM_MDT_LOADER
>  	tristate
>  	select QCOM_SCM
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index dcebf28..e16d6a2 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>  obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
> diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c
> new file mode 100644
> index 0000000..cd431d9
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-sdm845.c
> @@ -0,0 +1,120 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/soc/qcom/llcc-qcom.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +
> +/*
> + * SCT entry contains of the following parameters
> + * name: Name of the client's use case for which the llcc slice is used
> + * uid: Unique id for the client's use case
> + * slice_id: llcc slice id for each client
> + * max_cap: The maximum capacity of the cache slice provided in KB
> + * priority: Priority of the client used to select victim line for replacement
> + * fixed_size: Determine of the slice has a fixed capacity
> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if
> + *             it't not a reserved way.
> + * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used
> + *           by any other client than the one its assigned to.
> + * cache_mode: Each slice operates as a cache, this controls the mode of the
> + *             slice normal or TCM
> + * probe_target_ways: Determines what ways to probe for access hit. When
> + *                    configured to 1 only bonus and reseved ways are probed.
> + *                    when configured to 0 all ways in llcc are probed.
> + * dis_cap_alloc: Disable capacity based allocation for a client
> + * retain_on_pc: If this bit is set and client has maitained active vote
> + *               then the ways assigned to this client are not flushed on power
> + *               collapse.
> + * activate_on_init: Activate the slice immidiately after the SCT is programmed
> + */
> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \
> +	{					\
> +		.name = n,			\
> +		.usecase_id = uid,		\
> +		.slice_id = sid,		\
> +		.max_cap = mc,			\
> +		.priority = p,			\
> +		.fixed_size = fs,		\
> +		.bonus_ways = bway,		\
> +		.res_ways = rway,		\
> +		.cache_mode = cmod,		\
> +		.probe_target_ways = ptw,	\
> +		.dis_cap_alloc = dca,		\
> +		.retain_on_pc = rp,		\
> +		.activate_on_init = a,		\
> +	}
> +
> +
> +static struct llcc_slice_config sdm845_data[] =  {
> +	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 1),
> +	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 0),
> +	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 1),
> +	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 0),
> +	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 0),
> +};
> +
> +
> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
> +{
> +	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));

I think having separate driver just for this config structure is
pointless. Please move this in llcc driver and select the configuration
based on compatible string.

On first sight the driver has many coding style issues and flooding err
messages which should be dropped. Did you run checkpatch?

> +}
> +
> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
> +	{ .compatible = "qcom,sdm845-llcc", },
> +	{ },
> +};
> +
> +static struct platform_driver sdm845_qcom_llcc_driver = {
> +	.driver = {
> +		.name = "sdm845-llcc",
> +		.owner = THIS_MODULE,
> +		.of_match_table = sdm845_qcom_llcc_of_match,
> +	},
> +	.probe = sdm845_qcom_llcc_probe,
> +	.remove = qcom_llcc_remove,
> +};
> +
> +static int __init sdm845_init_qcom_llcc_init(void)
> +{
> +	return platform_driver_register(&sdm845_qcom_llcc_driver);
> +}
> +module_init(sdm845_init_qcom_llcc_init);
> +
> +static void __exit sdm845_exit_qcom_llcc_exit(void)
> +{
> +	platform_driver_unregister(&sdm845_qcom_llcc_driver);
> +}
> +module_exit(sdm845_exit_qcom_llcc_exit);
> +
> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-slice.c
> new file mode 100644
> index 0000000..6e86770
> --- /dev/null
> +++ b/drivers/soc/qcom/llcc-slice.c
> @@ -0,0 +1,454 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#define pr_fmt(fmt)  "%s:" fmt, __func__

drop this and use dev_xxx instead.

> +
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/mutex.h>
> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/soc/qcom/llcc-qcom.h>
> +
> +#define ACTIVATE                      0x1
> +#define DEACTIVATE                    0x2
> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
> +#define ACT_CTRL_ACT_TRIG             0x1
> +#define ACT_CTRL_OPCODE_SHIFT         0x1
> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
> +#define ATTR1_PRIORITY_SHIFT          0x4
> +#define ATTR1_MAX_CAP_SHIFT           0x10
> +#define ATTR0_RES_WAYS_MASK           0x00000fff
> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
> +#define ATR0_BONUS_WAYS_SHIFT         0x10
> +#define LLCC_STATUS_READ_DELAY 100
> +
> +#define CACHE_LINE_SIZE_SHIFT 6
> +
> +#define LLCC_COMMON_STATUS0		0x0003000C
> +#define LLCC_LB_CNT_MASK		0xf0000000
> +#define LLCC_LB_CNT_SHIFT		28
> +
> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
> +
> +
> +
> +static const struct regmap_config llcc_regmap_config = {
> +		.reg_bits = 32,
> +		.reg_stride = 4,
> +		.val_bits = 32,
> +		.fast_io = true,
> +};
> +
> +
> +/* Get the slice entry by index */
> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev, int n)

drop this *slice* word from function names

> +{
> +	struct of_phandle_args phargs;
> +	struct llcc_drv_data *drv;
> +	const struct llcc_slice_config *llcc_data_ptr;
> +	struct llcc_slice_desc *desc;
> +	struct platform_device *pdev;
> +	u32 sz, count;
> +
> +	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
> +				       "#cache-cells", n, &phargs)) {
> +		pr_err("can't parse \"cache-slices\" property\n");

drop all pr_err here and below.

> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	pdev = of_find_device_by_node(phargs.np);
> +	if (!pdev) {
> +		pr_err("Cannot find platform device from phandle\n");
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	drv = platform_get_drvdata(pdev);
> +	if (!drv) {
> +		pr_err("cannot find platform driver data\n");
> +		return ERR_PTR(-EFAULT);
> +	}
> +
> +	llcc_data_ptr = drv->slice_data;
> +	sz = drv->llcc_config_data_sz;
> +	count = 0;
> +
> +	while (llcc_data_ptr && count < sz) {
> +		if (llcc_data_ptr->usecase_id == phargs.args[0])
> +			break;
> +		llcc_data_ptr++;
> +		count++;
> +	}
> +
> +	if (llcc_data_ptr == NULL || count == sz) {
> +		pr_err("can't find %d usecase id\n", phargs.args[0]);
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
> +	if (!desc)
> +		return ERR_PTR(-ENOMEM);
> +
> +	desc->llcc_slice_id = llcc_data_ptr->slice_id;
> +	desc->llcc_slice_size = llcc_data_ptr->max_cap;
> +	desc->dev = &pdev->dev;
> +
> +	return desc;
> +}
> +
> +/**
> + * llcc_slice_getd - get llcc slice descriptor
> + * @dev: Device pointer of the client
> + * @name: Name of the use case
> + *
> + * A pointer to llcc slice descriptor will be returned on success and
> + * and error pointer is returned on failure
> + */
> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const char *name)
> +{
> +	struct device_node *np = dev->of_node;
> +	int index = 0;
> +	const char *slice_name;
> +	struct property *prop;
> +
> +	if (!np) {
> +		dev_err(dev, "%s() currently only supports DT\n", __func__);
> +		return ERR_PTR(-ENOENT);
> +	}
> +
> +	if (!of_get_property(np, "cache-slice-names", NULL)) {
> +		dev_err(dev,
> +			"%s() requires a \"cache-slice-names\" property\n",
> +			__func__);
> +		return ERR_PTR(-ENOENT);
> +	}
> +
> +	of_property_for_each_string(np, "cache-slice-names", prop, slice_name) {
> +		if (!strcmp(name, slice_name))
> +			break;
> +		index++;
> +	}
> +
> +	return llcc_slice_get_entry(dev, index);
> +}
> +EXPORT_SYMBOL(llcc_slice_getd);

should be EXPORT_SYMBOL_GPL here and on all other places.

> +
> +/**
> + * llcc_slice_putd - llcc slice descritpor
> + * @desc: Pointer to llcc slice descriptor
> + */
> +void llcc_slice_putd(struct llcc_slice_desc *desc)
> +{
> +	kfree(desc);
> +}
> +EXPORT_SYMBOL(llcc_slice_putd);
> +
> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
> +				u32 act_ctrl_reg_val, u32 status)
> +{
> +	u32 act_ctrl_reg;
> +	u32 status_reg;
> +	u32 slice_status;
> +	unsigned long timeout;
> +
> +	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
> +	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
> +
> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);

check for regmap_write error? Infact you don't check for regmap errors
at all.

> +
> +	/* Make sure the activate trigger is applied before clearing it */
> +	mb();
> +
> +	/* Clear the ACTIVE trigger */
> +	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> +
> +	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
> +	while (time_before(jiffies, timeout)) {
> +		regmap_read(drv->llcc_map, status_reg, &slice_status);
> +		if (!(slice_status & status))
> +			return 0;
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +/**
> + * llcc_slice_activate - Activate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_activate(struct llcc_slice_desc *desc)
> +{
> +	int rc = -EINVAL;

please use 'ret' for variable name, here and on all other places.

> +	u32 act_ctrl_val;
> +	struct llcc_drv_data *drv;
> +
> +	if (desc == NULL)
> +		return rc;
> +
> +	drv = dev_get_drvdata(desc->dev);
> +	if (!drv)
> +		return rc;

return -EINVAL;

> +
> +	mutex_lock(&drv->slice_mutex);
> +	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +		mutex_unlock(&drv->slice_mutex);
> +		return 0;
> +	}
> +
> +	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +				  DEACTIVATE);
> +
> +	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +	mutex_unlock(&drv->slice_mutex);
> +
> +	return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_activate);
> +
> +/**
> + * llcc_slice_deactivate - Deactivate the llcc slice
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A value zero will be returned on success and a negative errno will
> + * be returned in error cases
> + */
> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)

just llcc_activate

> +{
> +	u32 act_ctrl_val;
> +	int rc = -EINVAL;
> +	struct llcc_drv_data *drv;
> +
> +	if (desc == NULL)
> +		return rc;
> +
> +	drv = dev_get_drvdata(desc->dev);
> +	if (!drv)
> +		return rc;
> +
> +	mutex_lock(&drv->slice_mutex);
> +	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
> +		mutex_unlock(&drv->slice_mutex);
> +		return 0;
> +	}
> +	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
> +
> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
> +				  ACTIVATE);
> +
> +	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
> +	mutex_unlock(&drv->slice_mutex);
> +
> +	return rc;
> +}
> +EXPORT_SYMBOL(llcc_slice_deactivate);
> +
> +/**
> + * llcc_get_slice_id - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and a negative errno will
> + * be returned on error
> + */
> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
> +{
> +	if (!desc)
> +		return -EINVAL;
> +
> +	return desc->llcc_slice_id;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_id);
> +
> +/**
> + * llcc_get_slice_size - return the slice id
> + * @desc: Pointer to llcc slice descriptor
> + *
> + * A positive value will be returned on success and zero will returned on
> + * error
> + */
> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
> +{
> +	if (!desc)
> +		return 0;
> +
> +	return desc->llcc_slice_size;
> +}
> +EXPORT_SYMBOL(llcc_get_slice_size);
> +
> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
> +{
> +	int i;
> +	u32 attr1_cfg;
> +	u32 attr0_cfg;
> +	u32 attr1_val;
> +	u32 attr0_val;
> +	u32 max_cap_cacheline;
> +	u32 sz;
> +	const struct llcc_slice_config *llcc_table;
> +	struct llcc_slice_desc desc;
> +	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
> +	u32 b_off = drv->b_off;
> +
> +	sz = drv->llcc_config_data_sz;
> +	llcc_table = drv->slice_data;
> +
> +	for (i = 0; i < sz; i++) {
> +		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
> +		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
> +
> +		attr1_val = llcc_table[i].cache_mode;
> +		attr1_val |= (llcc_table[i].probe_target_ways <<
> +				ATTR1_PROBE_TARGET_WAYS_SHIFT);

braces are not needed, here and below.

> +		attr1_val |= (llcc_table[i].fixed_size <<
> +				ATTR1_FIXED_SIZE_SHIFT);
> +		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
> +
> +		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
> +
> +		/* LLCC instances can vary for each target.
> +		 * The SW writes to broadcast register which gets propagated
> +		 * to each llcc instace (llcc0,.. llccN).
> +		 * Since the size of the memory is divided equally amongst the
> +		 * llcc instances, we need to configure the max cap accordingly.
> +		 */
> +		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
> +		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
> +		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
> +
> +		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
> +		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
> +
> +		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
> +		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
> +
> +		/* Make sure that the SCT is programmed before activating */
> +		mb();

shouldn't this be wmb()?

> +
> +		if (llcc_table[i].activate_on_init) {
> +			desc.llcc_slice_id = llcc_table[i].slice_id;
> +			desc.dev = &pdev->dev;
> +			if (llcc_slice_activate(&desc)) {
> +				pr_err("activate slice id: %d timed out\n",
> +						desc.llcc_slice_id);

Make the fucntion to return int and propagate the error. And please drop
all pr_err.

> +			}
> +		}
> +	}
> +}
> +
> +int qcom_llcc_probe(struct platform_device *pdev,
> +		      const struct llcc_slice_config *llcc_cfg, u32 sz)
> +{
> +	int rc = 0;
> +	u32 num_banks = 0;
> +	struct device *dev = &pdev->dev;
> +	static struct llcc_drv_data *drv_data;

static ??

> +	struct resource *res;
> +	void __iomem *base;
> +
> +	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
> +	if (!drv_data)
> +		return PTR_ERR(drv_data);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(base)) {
> +		dev_err(&pdev->dev, "Cannot find the resource in device\n");

this error message is not needed.

> +		return PTR_ERR(base);
> +	}
> +
> +	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, &llcc_regmap_config);
> +	if (IS_ERR(drv_data->llcc_map)) {
> +		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");

again not needed.

> +		return PTR_ERR(drv_data->llcc_map);
> +	}
> +
> +	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
> +		    &num_banks);
> +
> +	num_banks &= LLCC_LB_CNT_MASK;
> +	num_banks >>= LLCC_LB_CNT_SHIFT;
> +	drv_data->num_banks = num_banks;
> +
> +	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
> +				  &drv_data->max_slices);
> +	if (rc) {
> +		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");

and this too.

> +		devm_kfree(&pdev->dev, drv_data);
> +		return rc;
> +	}

need blank line here.

> +	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), GFP_KERNEL);
> +	if (!drv_data->offsets) {
> +		devm_kfree(&pdev->dev, drv_data);
> +		return PTR_ERR(drv_data->offsets);
> +	}
> +
> +	drv_data->offsets[0] = 0x0;
> +	drv_data->offsets[1] = 0x80000;
> +	drv_data->offsets[2] = 0x100000;
> +	drv_data->offsets[3] = 0x180000;
> +	drv_data->b_off = 0x200000;

shouln't this be SoC or llcc version specific?

> +
> +	drv_data->llcc_slice_map = kcalloc(BITS_TO_LONGS(drv_data->max_slices),
> +				   sizeof(unsigned long), GFP_KERNEL);
> +
> +	if (!drv_data->llcc_slice_map) {
> +		devm_kfree(&pdev->dev, drv_data);
> +		return PTR_ERR(drv_data->llcc_slice_map);
> +	}
> +
> +	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
> +	drv_data->slice_data = llcc_cfg;
> +	drv_data->llcc_config_data_sz = sz;
> +	mutex_init(&drv_data->slice_mutex);
> +	platform_set_drvdata(pdev, drv_data);
> +
> +	qcom_llcc_cfg_program(pdev);
> +
> +	return rc;
> +}
> +EXPORT_SYMBOL(qcom_llcc_probe);
> +
> +int qcom_llcc_remove(struct platform_device *pdev)
> +{
> +	static struct llcc_drv_data *drv_data;
> +
> +	drv_data = platform_get_drvdata(pdev);
> +
> +	mutex_destroy(&drv_data->slice_mutex);
> +	kfree(drv_data->llcc_slice_map);
> +	devm_kfree(&pdev->dev, drv_data);
> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(qcom_llcc_remove);
> diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
> new file mode 100644
> index 0000000..c408a8d
> --- /dev/null
> +++ b/include/linux/soc/qcom/llcc-qcom.h
> @@ -0,0 +1,178 @@
> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __LLCC_QCOM__
> +#define __LLCC_QCOM__
> +
> +/**
> + * llcc_slice_desc - Cache slice descriptor
> + * @llcc_slice_id: llcc slice id
> + * @llcc_slice_size: Size allocated for the llcc slice
> + * @dev: pointer to llcc device
> + */
> +struct llcc_slice_desc {

'llcc_desc' is enough.

> +	int llcc_slice_id;

'slice_id' or even better 'id'.

> +	size_t llcc_slice_size;

'slice_size' or just 'size'

> +	struct device *dev;
> +};
> +
> +/**
> + * llcc_slice_config - Data associated with the llcc slice
> + * @name: name of the use case associated with the llcc slice
> + * @usecase_id: usecase id for which the llcc slice is used
> + * @slice_id: llcc slice id assigned to each slice
> + * @max_cap: maximum capacity of the llcc slice
> + * @priority: priority of the llcc slice
> + * @fixed_size: whether the llcc slice can grow beyond its size
> + * @bonus_ways: bonus ways associated with llcc slice
> + * @res_ways: reserved ways associated with llcc slice
> + * @cache_mode: mode of the llcce slice
> + * @probe_target_ways: Probe only reserved and bonus ways on a cache miss
> + * @dis_cap_alloc: Disable capacity based allocation
> + * @retain_on_pc: Retain through power collapse
> + * @activate_on_init: activate the slice on init
> + */
> +struct llcc_slice_config {

Once you move struct llcc_slice_config sdm845_data in llcc.c this
structure must not be exported.

> +	const char *name;
> +	int usecase_id;

unsigned int?

> +	int slice_id;

unsingned int?

> +	u32 max_cap;
> +	u32 priority;
> +	bool fixed_size;
> +	u32 bonus_ways;
> +	u32 res_ways;
> +	u32 cache_mode;
> +	u32 probe_target_ways;
> +	bool dis_cap_alloc;
> +	bool retain_on_pc;
> +	u32 activate_on_init;
> +};
> +
> +/**
> + * llcc_drv_data - Data associated with the llcc driver
> + * @llcc_map: regmap associated with the llcc device
> + * @slice_data: pointer to the data structure associated with slice

should be better 'data structure for slice configuration'?

> + * @slice_mutex: mutex associated with each slice
> + * @llcc_config_data_sz: size of the config data table
> + * @max_slices: max slices as read from device tree
> + * @b_off: Offset of the broadcast bank
> + * @num_banks: Number of llcc banks
> + * @llcc_slice_map: Bit map to track the active slice ids
> + * @offsets: Pointer to the bank offsets array
> + */
> +
> +struct llcc_drv_data {
> +		struct regmap *llcc_map;

s/llcc_map/regmap

> +		const struct llcc_slice_config *slice_data;

s/slice_data/cfg

> +		struct mutex slice_mutex;

just 'lock'

> +		u32 llcc_config_data_sz;

cfg_size?

> +		u32 max_slices;
> +		u32 b_off;
> +		u32 num_banks;
> +		unsigned long *llcc_slice_map;

only 'bitmap'?

> +		u32 *offsets;
> +};
> +
> +

<cut>

-- 
regards,
Stan

Re: [PATCH v3 1/2] Documentation: Documentation for qcom, llcc

[Stanimir Varbanov]

Hi,

On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
> Documentation for last level cache controller device tree bindings,
> client bindings usage examples.
> 
> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  .../devicetree/bindings/arm/msm/qcom,llcc.txt      | 70 ++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> new file mode 100644
> index 0000000..ceb20a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> @@ -0,0 +1,70 @@
> +== Introduction==
> +
> +LLCC (Last Level Cache Controller) driver is implemented as a platform device.
> +The driver Programs the SCT (system configuration table). The SCT programming
> +divides the system cache into slices. Each slice is assigned an ID A.K.A
> +SCID(Sub-cache ID).
> +HW modules that are designated to use the system cache are known as clients.
> +Each client must also be represented as a node in the device tree just like
> +any other hw module.
> +One client can have multiple SCID's assigned meaning each client could get
> +multiple slices in the cache. Client can use the slices for various pre-defined
> +usecases. Each client defines a set of names for these usecases in its
> +device tree binding.
> +Client makes a request to LLCC device to get cache-slices properties for each
> +of its usecase. Client gets the information like cache slice ID and size of the
> +cache slice.

All this describes the driver, please just describe what is LLCC and for
what it used for.

> +
> +== llcc device ==

drop this.

> +
> +Properties:
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be "qcom,sdm855-llcc"
> +
> +- reg:
> +	Usage: required
> +	Value Type: <prop-encoded-array>
> +	Definition: must be addresses and sizes of the LLCC registers
> +
> +- #cache-cells:
> +	Usage: required
> +	Value Type: <u32>
> +	Definition: Number of cache cells, must be 1
> +
> +- max-slices:
> +	usage: required
> +	Value Type: <u32>
> +	Definition: Number of cache slices supported by hardware
> +
> +Example:
> +
> +	llcc: qcom,sdm855-llcc@01100000 {

this should be qcom,llcc@1100000

> +		compatible = "qcom,sdm845-llcc";
> +		reg = <0x01100000 0x250000>;
> +		#cache-cells = <1>;
> +		max-slices = <32>;
> +	};
> +
> +== Client ==
> +
> +Required properties:
> +- cache-slice-names:

in my opinion this shouldn't be required but optional.

> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: A set of names that identify the usecase names of a client that
> +			uses cache slice. These strings are used to look up the cache slice
> +		    entries by name.
> +
> +- cache-slices:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: The tuple has phandle to llcc device as the first argument and
> +			the second argument is the usecase id of the client.
> +For Example:
> +
> +	venus {
> +		cache-slice-names = "vidsc0", "vidsc1";
> +		cache-slices = <&llcc 2>, <&llcc 3>;

please make 2,3 and so on #defines.

-- 
regards,
Stan

[PATCH v3 1/2] Documentation: Documentation for qcom, llcc

[Stanimir Varbanov]

Hi,

On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
> Documentation for last level cache controller device tree bindings,
> client bindings usage examples.
> 
> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  .../devicetree/bindings/arm/msm/qcom,llcc.txt      | 70 ++++++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> new file mode 100644
> index 0000000..ceb20a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.txt
> @@ -0,0 +1,70 @@
> +== Introduction==
> +
> +LLCC (Last Level Cache Controller) driver is implemented as a platform device.
> +The driver Programs the SCT (system configuration table). The SCT programming
> +divides the system cache into slices. Each slice is assigned an ID A.K.A
> +SCID(Sub-cache ID).
> +HW modules that are designated to use the system cache are known as clients.
> +Each client must also be represented as a node in the device tree just like
> +any other hw module.
> +One client can have multiple SCID's assigned meaning each client could get
> +multiple slices in the cache. Client can use the slices for various pre-defined
> +usecases. Each client defines a set of names for these usecases in its
> +device tree binding.
> +Client makes a request to LLCC device to get cache-slices properties for each
> +of its usecase. Client gets the information like cache slice ID and size of the
> +cache slice.

All this describes the driver, please just describe what is LLCC and for
what it used for.

> +
> +== llcc device ==

drop this.

> +
> +Properties:
> +- compatible:
> +	Usage: required
> +	Value type: <string>
> +	Definition: must be "qcom,sdm855-llcc"
> +
> +- reg:
> +	Usage: required
> +	Value Type: <prop-encoded-array>
> +	Definition: must be addresses and sizes of the LLCC registers
> +
> +- #cache-cells:
> +	Usage: required
> +	Value Type: <u32>
> +	Definition: Number of cache cells, must be 1
> +
> +- max-slices:
> +	usage: required
> +	Value Type: <u32>
> +	Definition: Number of cache slices supported by hardware
> +
> +Example:
> +
> +	llcc: qcom,sdm855-llcc at 01100000 {

this should be qcom,llcc at 1100000

> +		compatible = "qcom,sdm845-llcc";
> +		reg = <0x01100000 0x250000>;
> +		#cache-cells = <1>;
> +		max-slices = <32>;
> +	};
> +
> +== Client ==
> +
> +Required properties:
> +- cache-slice-names:

in my opinion this shouldn't be required but optional.

> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: A set of names that identify the usecase names of a client that
> +			uses cache slice. These strings are used to look up the cache slice
> +		    entries by name.
> +
> +- cache-slices:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: The tuple has phandle to llcc device as the first argument and
> +			the second argument is the usecase id of the client.
> +For Example:
> +
> +	venus {
> +		cache-slice-names = "vidsc0", "vidsc1";
> +		cache-slices = <&llcc 2>, <&llcc 3>;

please make 2,3 and so on #defines.

-- 
regards,
Stan

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[Channa]

On 2018-03-29 01:08, Stanimir Varbanov wrote:
> Hi,
> 
> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>> LLCC (Last Level Cache Controller) provides additional cache memory
>> in the system. LLCC is partitioned into muliple slices and each
>> slice getting its own priority, size, ID and other config parameters.
>> LLCC driver programs these parameters for each slice. Clients that
>> are assigned to use LLCC need to get information such size & ID of the
>>  slice they get and activate or deactivate the slice as needed. LLCC 
>> driver
>> provides API interfaces for the clients to perform these operations.
>> 
>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>> ---
>>  drivers/soc/qcom/Kconfig           |  16 ++
>>  drivers/soc/qcom/Makefile          |   2 +
>>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>>  drivers/soc/qcom/llcc-slice.c      | 454 
>> +++++++++++++++++++++++++++++++++++++
> 
> I'd name it just llcc.c, slice suffix didn't add any value.
> 
>>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>  5 files changed, 770 insertions(+)
>>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>> 
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index e050eb8..28237fc 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>            functions for connecting the underlying serial UART, SPI, 
>> and I2C
>>            devices to the output pins.
>> 
>> +config QCOM_LLCC
>> +	tristate "Qualcomm Technologies, Inc. LLCC driver"
>> +	depends on ARCH_QCOM
>> +	help
>> +	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
>> +	  Level Cache. This provides interfaces to client's that use the 
>> LLCC.
>> +	  Say yes here to enable LLCC slice driver.
>> +
>> +config QCOM_SDM845_LLCC
>> +	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>> +	depends on QCOM_LLCC
>> +	help
>> +	  Say yes here to enable the LLCC driver for SDM845. This is 
>> provides
>> +	  data required to configure LLCC so that clients can start using 
>> the
>> +	  LLCC slices.
>> +
>>  config QCOM_MDT_LOADER
>>  	tristate
>>  	select QCOM_SCM
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index dcebf28..e16d6a2 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>  obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>> diff --git a/drivers/soc/qcom/llcc-sdm845.c 
>> b/drivers/soc/qcom/llcc-sdm845.c
>> new file mode 100644
>> index 0000000..cd431d9
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>> @@ -0,0 +1,120 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +
>> +
>> +/*
>> + * SCT entry contains of the following parameters
>> + * name: Name of the client's use case for which the llcc slice is 
>> used
>> + * uid: Unique id for the client's use case
>> + * slice_id: llcc slice id for each client
>> + * max_cap: The maximum capacity of the cache slice provided in KB
>> + * priority: Priority of the client used to select victim line for 
>> replacement
>> + * fixed_size: Determine of the slice has a fixed capacity
>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used 
>> only if
>> + *             it't not a reserved way.
>> + * res_ways: Reserved ways for the cache slice, the reserved ways 
>> cannot be used
>> + *           by any other client than the one its assigned to.
>> + * cache_mode: Each slice operates as a cache, this controls the mode 
>> of the
>> + *             slice normal or TCM
>> + * probe_target_ways: Determines what ways to probe for access hit. 
>> When
>> + *                    configured to 1 only bonus and reseved ways are 
>> probed.
>> + *                    when configured to 0 all ways in llcc are 
>> probed.
>> + * dis_cap_alloc: Disable capacity based allocation for a client
>> + * retain_on_pc: If this bit is set and client has maitained active 
>> vote
>> + *               then the ways assigned to this client are not 
>> flushed on power
>> + *               collapse.
>> + * activate_on_init: Activate the slice immidiately after the SCT is 
>> programmed
>> + */
>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, 
>> rp, a) \
>> +	{					\
>> +		.name = n,			\
>> +		.usecase_id = uid,		\
>> +		.slice_id = sid,		\
>> +		.max_cap = mc,			\
>> +		.priority = p,			\
>> +		.fixed_size = fs,		\
>> +		.bonus_ways = bway,		\
>> +		.res_ways = rway,		\
>> +		.cache_mode = cmod,		\
>> +		.probe_target_ways = ptw,	\
>> +		.dis_cap_alloc = dca,		\
>> +		.retain_on_pc = rp,		\
>> +		.activate_on_init = a,		\
>> +	}
>> +
>> +
>> +static struct llcc_slice_config sdm845_data[] =  {
>> +	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 1),
>> +	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 
>> 1),
>> +	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +};
>> +
>> +
>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>> +{
>> +	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
> 
> I think having separate driver just for this config structure is
> pointless. Please move this in llcc driver and select the configuration
> based on compatible string.

Thanks Stan for your review.

Wanted to highlight the reason we chose this approach. The System cache 
table data
changes from chipset to chipset and overtime the table could have more 
parameters.
Adding it as part of the core driver and selecting the table based on 
compatible
would clutter the core driver. If we have 4 chipsets supporting system 
cache then
core driver would have 4 tables as above and we select one of them based 
on compatible
string. That is why we followed the pin control approach to have data in 
per chipset
driver and pass it to common driver.

> 
> On first sight the driver has many coding style issues and flooding err
> messages which should be dropped. Did you run checkpatch?
> 
>> +}
>> +
>> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
>> +	{ .compatible = "qcom,sdm845-llcc", },
>> +	{ },
>> +};
>> +
>> +static struct platform_driver sdm845_qcom_llcc_driver = {
>> +	.driver = {
>> +		.name = "sdm845-llcc",
>> +		.owner = THIS_MODULE,
>> +		.of_match_table = sdm845_qcom_llcc_of_match,
>> +	},
>> +	.probe = sdm845_qcom_llcc_probe,
>> +	.remove = qcom_llcc_remove,
>> +};
>> +
>> +static int __init sdm845_init_qcom_llcc_init(void)
>> +{
>> +	return platform_driver_register(&sdm845_qcom_llcc_driver);
>> +}
>> +module_init(sdm845_init_qcom_llcc_init);
>> +
>> +static void __exit sdm845_exit_qcom_llcc_exit(void)
>> +{
>> +	platform_driver_unregister(&sdm845_qcom_llcc_driver);
>> +}
>> +module_exit(sdm845_exit_qcom_llcc_exit);
>> +
>> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/soc/qcom/llcc-slice.c 
>> b/drivers/soc/qcom/llcc-slice.c
>> new file mode 100644
>> index 0000000..6e86770
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-slice.c
>> @@ -0,0 +1,454 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#define pr_fmt(fmt)  "%s:" fmt, __func__
> 
> drop this and use dev_xxx instead.
> 
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/device.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mutex.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/bitops.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +
>> +#define ACTIVATE                      0x1
>> +#define DEACTIVATE                    0x2
>> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
>> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
>> +#define ACT_CTRL_ACT_TRIG             0x1
>> +#define ACT_CTRL_OPCODE_SHIFT         0x1
>> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
>> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
>> +#define ATTR1_PRIORITY_SHIFT          0x4
>> +#define ATTR1_MAX_CAP_SHIFT           0x10
>> +#define ATTR0_RES_WAYS_MASK           0x00000fff
>> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
>> +#define ATR0_BONUS_WAYS_SHIFT         0x10
>> +#define LLCC_STATUS_READ_DELAY 100
>> +
>> +#define CACHE_LINE_SIZE_SHIFT 6
>> +
>> +#define LLCC_COMMON_STATUS0		0x0003000C
>> +#define LLCC_LB_CNT_MASK		0xf0000000
>> +#define LLCC_LB_CNT_SHIFT		28
>> +
>> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
>> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
>> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
>> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
>> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
>> +
>> +
>> +
>> +static const struct regmap_config llcc_regmap_config = {
>> +		.reg_bits = 32,
>> +		.reg_stride = 4,
>> +		.val_bits = 32,
>> +		.fast_io = true,
>> +};
>> +
>> +
>> +/* Get the slice entry by index */
>> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device 
>> *dev, int n)
> 
> drop this *slice* word from function names
> 
>> +{
>> +	struct of_phandle_args phargs;
>> +	struct llcc_drv_data *drv;
>> +	const struct llcc_slice_config *llcc_data_ptr;
>> +	struct llcc_slice_desc *desc;
>> +	struct platform_device *pdev;
>> +	u32 sz, count;
>> +
>> +	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
>> +				       "#cache-cells", n, &phargs)) {
>> +		pr_err("can't parse \"cache-slices\" property\n");
> 
> drop all pr_err here and below.
> 
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	pdev = of_find_device_by_node(phargs.np);
>> +	if (!pdev) {
>> +		pr_err("Cannot find platform device from phandle\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	drv = platform_get_drvdata(pdev);
>> +	if (!drv) {
>> +		pr_err("cannot find platform driver data\n");
>> +		return ERR_PTR(-EFAULT);
>> +	}
>> +
>> +	llcc_data_ptr = drv->slice_data;
>> +	sz = drv->llcc_config_data_sz;
>> +	count = 0;
>> +
>> +	while (llcc_data_ptr && count < sz) {
>> +		if (llcc_data_ptr->usecase_id == phargs.args[0])
>> +			break;
>> +		llcc_data_ptr++;
>> +		count++;
>> +	}
>> +
>> +	if (llcc_data_ptr == NULL || count == sz) {
>> +		pr_err("can't find %d usecase id\n", phargs.args[0]);
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
>> +	if (!desc)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	desc->llcc_slice_id = llcc_data_ptr->slice_id;
>> +	desc->llcc_slice_size = llcc_data_ptr->max_cap;
>> +	desc->dev = &pdev->dev;
>> +
>> +	return desc;
>> +}
>> +
>> +/**
>> + * llcc_slice_getd - get llcc slice descriptor
>> + * @dev: Device pointer of the client
>> + * @name: Name of the use case
>> + *
>> + * A pointer to llcc slice descriptor will be returned on success and
>> + * and error pointer is returned on failure
>> + */
>> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const 
>> char *name)
>> +{
>> +	struct device_node *np = dev->of_node;
>> +	int index = 0;
>> +	const char *slice_name;
>> +	struct property *prop;
>> +
>> +	if (!np) {
>> +		dev_err(dev, "%s() currently only supports DT\n", __func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	if (!of_get_property(np, "cache-slice-names", NULL)) {
>> +		dev_err(dev,
>> +			"%s() requires a \"cache-slice-names\" property\n",
>> +			__func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	of_property_for_each_string(np, "cache-slice-names", prop, 
>> slice_name) {
>> +		if (!strcmp(name, slice_name))
>> +			break;
>> +		index++;
>> +	}
>> +
>> +	return llcc_slice_get_entry(dev, index);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_getd);
> 
> should be EXPORT_SYMBOL_GPL here and on all other places.
> 
>> +
>> +/**
>> + * llcc_slice_putd - llcc slice descritpor
>> + * @desc: Pointer to llcc slice descriptor
>> + */
>> +void llcc_slice_putd(struct llcc_slice_desc *desc)
>> +{
>> +	kfree(desc);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_putd);
>> +
>> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
>> +				u32 act_ctrl_reg_val, u32 status)
>> +{
>> +	u32 act_ctrl_reg;
>> +	u32 status_reg;
>> +	u32 slice_status;
>> +	unsigned long timeout;
>> +
>> +	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
>> +	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
>> +
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> 
> check for regmap_write error? Infact you don't check for regmap errors
> at all.
> 
>> +
>> +	/* Make sure the activate trigger is applied before clearing it */
>> +	mb();
>> +
>> +	/* Clear the ACTIVE trigger */
>> +	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
>> +
>> +	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
>> +	while (time_before(jiffies, timeout)) {
>> +		regmap_read(drv->llcc_map, status_reg, &slice_status);
>> +		if (!(slice_status & status))
>> +			return 0;
>> +	}
>> +
>> +	return -ETIMEDOUT;
>> +}
>> +
>> +/**
>> + * llcc_slice_activate - Activate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_activate(struct llcc_slice_desc *desc)
>> +{
>> +	int rc = -EINVAL;
> 
> please use 'ret' for variable name, here and on all other places.
> 
>> +	u32 act_ctrl_val;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
> 
> return -EINVAL;
> 
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +
>> +	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  DEACTIVATE);
>> +
>> +	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_activate);
>> +
>> +/**
>> + * llcc_slice_deactivate - Deactivate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> 
> just llcc_activate
> 
>> +{
>> +	u32 act_ctrl_val;
>> +	int rc = -EINVAL;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  ACTIVATE);
>> +
>> +	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_deactivate);
>> +
>> +/**
>> + * llcc_get_slice_id - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and a negative errno 
>> will
>> + * be returned on error
>> + */
>> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return -EINVAL;
>> +
>> +	return desc->llcc_slice_id;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_id);
>> +
>> +/**
>> + * llcc_get_slice_size - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and zero will 
>> returned on
>> + * error
>> + */
>> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return 0;
>> +
>> +	return desc->llcc_slice_size;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_size);
>> +
>> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
>> +{
>> +	int i;
>> +	u32 attr1_cfg;
>> +	u32 attr0_cfg;
>> +	u32 attr1_val;
>> +	u32 attr0_val;
>> +	u32 max_cap_cacheline;
>> +	u32 sz;
>> +	const struct llcc_slice_config *llcc_table;
>> +	struct llcc_slice_desc desc;
>> +	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
>> +	u32 b_off = drv->b_off;
>> +
>> +	sz = drv->llcc_config_data_sz;
>> +	llcc_table = drv->slice_data;
>> +
>> +	for (i = 0; i < sz; i++) {
>> +		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
>> +		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
>> +
>> +		attr1_val = llcc_table[i].cache_mode;
>> +		attr1_val |= (llcc_table[i].probe_target_ways <<
>> +				ATTR1_PROBE_TARGET_WAYS_SHIFT);
> 
> braces are not needed, here and below.
> 
>> +		attr1_val |= (llcc_table[i].fixed_size <<
>> +				ATTR1_FIXED_SIZE_SHIFT);
>> +		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
>> +
>> +		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
>> +
>> +		/* LLCC instances can vary for each target.
>> +		 * The SW writes to broadcast register which gets propagated
>> +		 * to each llcc instace (llcc0,.. llccN).
>> +		 * Since the size of the memory is divided equally amongst the
>> +		 * llcc instances, we need to configure the max cap accordingly.
>> +		 */
>> +		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
>> +		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
>> +		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
>> +
>> +		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
>> +		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
>> +
>> +		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
>> +		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
>> +
>> +		/* Make sure that the SCT is programmed before activating */
>> +		mb();
> 
> shouldn't this be wmb()?
> 
>> +
>> +		if (llcc_table[i].activate_on_init) {
>> +			desc.llcc_slice_id = llcc_table[i].slice_id;
>> +			desc.dev = &pdev->dev;
>> +			if (llcc_slice_activate(&desc)) {
>> +				pr_err("activate slice id: %d timed out\n",
>> +						desc.llcc_slice_id);
> 
> Make the fucntion to return int and propagate the error. And please 
> drop
> all pr_err.
> 
>> +			}
>> +		}
>> +	}
>> +}
>> +
>> +int qcom_llcc_probe(struct platform_device *pdev,
>> +		      const struct llcc_slice_config *llcc_cfg, u32 sz)
>> +{
>> +	int rc = 0;
>> +	u32 num_banks = 0;
>> +	struct device *dev = &pdev->dev;
>> +	static struct llcc_drv_data *drv_data;
> 
> static ??
> 
>> +	struct resource *res;
>> +	void __iomem *base;
>> +
>> +	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>> +	if (!drv_data)
>> +		return PTR_ERR(drv_data);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	base = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(base)) {
>> +		dev_err(&pdev->dev, "Cannot find the resource in device\n");
> 
> this error message is not needed.
> 
>> +		return PTR_ERR(base);
>> +	}
>> +
>> +	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, 
>> &llcc_regmap_config);
>> +	if (IS_ERR(drv_data->llcc_map)) {
>> +		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
> 
> again not needed.
> 
>> +		return PTR_ERR(drv_data->llcc_map);
>> +	}
>> +
>> +	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
>> +		    &num_banks);
>> +
>> +	num_banks &= LLCC_LB_CNT_MASK;
>> +	num_banks >>= LLCC_LB_CNT_SHIFT;
>> +	drv_data->num_banks = num_banks;
>> +
>> +	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
>> +				  &drv_data->max_slices);
>> +	if (rc) {
>> +		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
> 
> and this too.
> 
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return rc;
>> +	}
> 
> need blank line here.
> 
>> +	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), 
>> GFP_KERNEL);
>> +	if (!drv_data->offsets) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->offsets);
>> +	}
>> +
>> +	drv_data->offsets[0] = 0x0;
>> +	drv_data->offsets[1] = 0x80000;
>> +	drv_data->offsets[2] = 0x100000;
>> +	drv_data->offsets[3] = 0x180000;
>> +	drv_data->b_off = 0x200000;
> 
> shouln't this be SoC or llcc version specific?
> 
>> +
>> +	drv_data->llcc_slice_map = 
>> kcalloc(BITS_TO_LONGS(drv_data->max_slices),
>> +				   sizeof(unsigned long), GFP_KERNEL);
>> +
>> +	if (!drv_data->llcc_slice_map) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->llcc_slice_map);
>> +	}
>> +
>> +	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
>> +	drv_data->slice_data = llcc_cfg;
>> +	drv_data->llcc_config_data_sz = sz;
>> +	mutex_init(&drv_data->slice_mutex);
>> +	platform_set_drvdata(pdev, drv_data);
>> +
>> +	qcom_llcc_cfg_program(pdev);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_probe);
>> +
>> +int qcom_llcc_remove(struct platform_device *pdev)
>> +{
>> +	static struct llcc_drv_data *drv_data;
>> +
>> +	drv_data = platform_get_drvdata(pdev);
>> +
>> +	mutex_destroy(&drv_data->slice_mutex);
>> +	kfree(drv_data->llcc_slice_map);
>> +	devm_kfree(&pdev->dev, drv_data);
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_remove);
>> diff --git a/include/linux/soc/qcom/llcc-qcom.h 
>> b/include/linux/soc/qcom/llcc-qcom.h
>> new file mode 100644
>> index 0000000..c408a8d
>> --- /dev/null
>> +++ b/include/linux/soc/qcom/llcc-qcom.h
>> @@ -0,0 +1,178 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __LLCC_QCOM__
>> +#define __LLCC_QCOM__
>> +
>> +/**
>> + * llcc_slice_desc - Cache slice descriptor
>> + * @llcc_slice_id: llcc slice id
>> + * @llcc_slice_size: Size allocated for the llcc slice
>> + * @dev: pointer to llcc device
>> + */
>> +struct llcc_slice_desc {
> 
> 'llcc_desc' is enough.
> 
>> +	int llcc_slice_id;
> 
> 'slice_id' or even better 'id'.
> 
>> +	size_t llcc_slice_size;
> 
> 'slice_size' or just 'size'
> 
>> +	struct device *dev;
>> +};
>> +
>> +/**
>> + * llcc_slice_config - Data associated with the llcc slice
>> + * @name: name of the use case associated with the llcc slice
>> + * @usecase_id: usecase id for which the llcc slice is used
>> + * @slice_id: llcc slice id assigned to each slice
>> + * @max_cap: maximum capacity of the llcc slice
>> + * @priority: priority of the llcc slice
>> + * @fixed_size: whether the llcc slice can grow beyond its size
>> + * @bonus_ways: bonus ways associated with llcc slice
>> + * @res_ways: reserved ways associated with llcc slice
>> + * @cache_mode: mode of the llcce slice
>> + * @probe_target_ways: Probe only reserved and bonus ways on a cache 
>> miss
>> + * @dis_cap_alloc: Disable capacity based allocation
>> + * @retain_on_pc: Retain through power collapse
>> + * @activate_on_init: activate the slice on init
>> + */
>> +struct llcc_slice_config {
> 
> Once you move struct llcc_slice_config sdm845_data in llcc.c this
> structure must not be exported.
> 
>> +	const char *name;
>> +	int usecase_id;
> 
> unsigned int?
> 
>> +	int slice_id;
> 
> unsingned int?
> 
>> +	u32 max_cap;
>> +	u32 priority;
>> +	bool fixed_size;
>> +	u32 bonus_ways;
>> +	u32 res_ways;
>> +	u32 cache_mode;
>> +	u32 probe_target_ways;
>> +	bool dis_cap_alloc;
>> +	bool retain_on_pc;
>> +	u32 activate_on_init;
>> +};
>> +
>> +/**
>> + * llcc_drv_data - Data associated with the llcc driver
>> + * @llcc_map: regmap associated with the llcc device
>> + * @slice_data: pointer to the data structure associated with slice
> 
> should be better 'data structure for slice configuration'?
> 
>> + * @slice_mutex: mutex associated with each slice
>> + * @llcc_config_data_sz: size of the config data table
>> + * @max_slices: max slices as read from device tree
>> + * @b_off: Offset of the broadcast bank
>> + * @num_banks: Number of llcc banks
>> + * @llcc_slice_map: Bit map to track the active slice ids
>> + * @offsets: Pointer to the bank offsets array
>> + */
>> +
>> +struct llcc_drv_data {
>> +		struct regmap *llcc_map;
> 
> s/llcc_map/regmap
> 
>> +		const struct llcc_slice_config *slice_data;
> 
> s/slice_data/cfg
> 
>> +		struct mutex slice_mutex;
> 
> just 'lock'
> 
>> +		u32 llcc_config_data_sz;
> 
> cfg_size?
> 
>> +		u32 max_slices;
>> +		u32 b_off;
>> +		u32 num_banks;
>> +		unsigned long *llcc_slice_map;
> 
> only 'bitmap'?
> 
>> +		u32 *offsets;
>> +};
>> +
>> +
> 
> <cut>

-- 
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,
a Linux Foundation Collaborative Project

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Channa]

On 2018-03-29 01:08, Stanimir Varbanov wrote:
> Hi,
> 
> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>> LLCC (Last Level Cache Controller) provides additional cache memory
>> in the system. LLCC is partitioned into muliple slices and each
>> slice getting its own priority, size, ID and other config parameters.
>> LLCC driver programs these parameters for each slice. Clients that
>> are assigned to use LLCC need to get information such size & ID of the
>>  slice they get and activate or deactivate the slice as needed. LLCC 
>> driver
>> provides API interfaces for the clients to perform these operations.
>> 
>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>> ---
>>  drivers/soc/qcom/Kconfig           |  16 ++
>>  drivers/soc/qcom/Makefile          |   2 +
>>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>>  drivers/soc/qcom/llcc-slice.c      | 454 
>> +++++++++++++++++++++++++++++++++++++
> 
> I'd name it just llcc.c, slice suffix didn't add any value.
> 
>>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>  5 files changed, 770 insertions(+)
>>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>> 
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index e050eb8..28237fc 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>            functions for connecting the underlying serial UART, SPI, 
>> and I2C
>>            devices to the output pins.
>> 
>> +config QCOM_LLCC
>> +	tristate "Qualcomm Technologies, Inc. LLCC driver"
>> +	depends on ARCH_QCOM
>> +	help
>> +	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
>> +	  Level Cache. This provides interfaces to client's that use the 
>> LLCC.
>> +	  Say yes here to enable LLCC slice driver.
>> +
>> +config QCOM_SDM845_LLCC
>> +	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>> +	depends on QCOM_LLCC
>> +	help
>> +	  Say yes here to enable the LLCC driver for SDM845. This is 
>> provides
>> +	  data required to configure LLCC so that clients can start using 
>> the
>> +	  LLCC slices.
>> +
>>  config QCOM_MDT_LOADER
>>  	tristate
>>  	select QCOM_SCM
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index dcebf28..e16d6a2 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>  obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>> diff --git a/drivers/soc/qcom/llcc-sdm845.c 
>> b/drivers/soc/qcom/llcc-sdm845.c
>> new file mode 100644
>> index 0000000..cd431d9
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>> @@ -0,0 +1,120 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +
>> +
>> +/*
>> + * SCT entry contains of the following parameters
>> + * name: Name of the client's use case for which the llcc slice is 
>> used
>> + * uid: Unique id for the client's use case
>> + * slice_id: llcc slice id for each client
>> + * max_cap: The maximum capacity of the cache slice provided in KB
>> + * priority: Priority of the client used to select victim line for 
>> replacement
>> + * fixed_size: Determine of the slice has a fixed capacity
>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used 
>> only if
>> + *             it't not a reserved way.
>> + * res_ways: Reserved ways for the cache slice, the reserved ways 
>> cannot be used
>> + *           by any other client than the one its assigned to.
>> + * cache_mode: Each slice operates as a cache, this controls the mode 
>> of the
>> + *             slice normal or TCM
>> + * probe_target_ways: Determines what ways to probe for access hit. 
>> When
>> + *                    configured to 1 only bonus and reseved ways are 
>> probed.
>> + *                    when configured to 0 all ways in llcc are 
>> probed.
>> + * dis_cap_alloc: Disable capacity based allocation for a client
>> + * retain_on_pc: If this bit is set and client has maitained active 
>> vote
>> + *               then the ways assigned to this client are not 
>> flushed on power
>> + *               collapse.
>> + * activate_on_init: Activate the slice immidiately after the SCT is 
>> programmed
>> + */
>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, 
>> rp, a) \
>> +	{					\
>> +		.name = n,			\
>> +		.usecase_id = uid,		\
>> +		.slice_id = sid,		\
>> +		.max_cap = mc,			\
>> +		.priority = p,			\
>> +		.fixed_size = fs,		\
>> +		.bonus_ways = bway,		\
>> +		.res_ways = rway,		\
>> +		.cache_mode = cmod,		\
>> +		.probe_target_ways = ptw,	\
>> +		.dis_cap_alloc = dca,		\
>> +		.retain_on_pc = rp,		\
>> +		.activate_on_init = a,		\
>> +	}
>> +
>> +
>> +static struct llcc_slice_config sdm845_data[] =  {
>> +	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 1),
>> +	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 
>> 1),
>> +	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +};
>> +
>> +
>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>> +{
>> +	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
> 
> I think having separate driver just for this config structure is
> pointless. Please move this in llcc driver and select the configuration
> based on compatible string.

Thanks Stan for your review.

Wanted to highlight the reason we chose this approach. The System cache 
table data
changes from chipset to chipset and overtime the table could have more 
parameters.
Adding it as part of the core driver and selecting the table based on 
compatible
would clutter the core driver. If we have 4 chipsets supporting system 
cache then
core driver would have 4 tables as above and we select one of them based 
on compatible
string. That is why we followed the pin control approach to have data in 
per chipset
driver and pass it to common driver.

> 
> On first sight the driver has many coding style issues and flooding err
> messages which should be dropped. Did you run checkpatch?
> 
>> +}
>> +
>> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
>> +	{ .compatible = "qcom,sdm845-llcc", },
>> +	{ },
>> +};
>> +
>> +static struct platform_driver sdm845_qcom_llcc_driver = {
>> +	.driver = {
>> +		.name = "sdm845-llcc",
>> +		.owner = THIS_MODULE,
>> +		.of_match_table = sdm845_qcom_llcc_of_match,
>> +	},
>> +	.probe = sdm845_qcom_llcc_probe,
>> +	.remove = qcom_llcc_remove,
>> +};
>> +
>> +static int __init sdm845_init_qcom_llcc_init(void)
>> +{
>> +	return platform_driver_register(&sdm845_qcom_llcc_driver);
>> +}
>> +module_init(sdm845_init_qcom_llcc_init);
>> +
>> +static void __exit sdm845_exit_qcom_llcc_exit(void)
>> +{
>> +	platform_driver_unregister(&sdm845_qcom_llcc_driver);
>> +}
>> +module_exit(sdm845_exit_qcom_llcc_exit);
>> +
>> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/soc/qcom/llcc-slice.c 
>> b/drivers/soc/qcom/llcc-slice.c
>> new file mode 100644
>> index 0000000..6e86770
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-slice.c
>> @@ -0,0 +1,454 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#define pr_fmt(fmt)  "%s:" fmt, __func__
> 
> drop this and use dev_xxx instead.
> 
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/device.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mutex.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/bitops.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +
>> +#define ACTIVATE                      0x1
>> +#define DEACTIVATE                    0x2
>> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
>> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
>> +#define ACT_CTRL_ACT_TRIG             0x1
>> +#define ACT_CTRL_OPCODE_SHIFT         0x1
>> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
>> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
>> +#define ATTR1_PRIORITY_SHIFT          0x4
>> +#define ATTR1_MAX_CAP_SHIFT           0x10
>> +#define ATTR0_RES_WAYS_MASK           0x00000fff
>> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
>> +#define ATR0_BONUS_WAYS_SHIFT         0x10
>> +#define LLCC_STATUS_READ_DELAY 100
>> +
>> +#define CACHE_LINE_SIZE_SHIFT 6
>> +
>> +#define LLCC_COMMON_STATUS0		0x0003000C
>> +#define LLCC_LB_CNT_MASK		0xf0000000
>> +#define LLCC_LB_CNT_SHIFT		28
>> +
>> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
>> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
>> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
>> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
>> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
>> +
>> +
>> +
>> +static const struct regmap_config llcc_regmap_config = {
>> +		.reg_bits = 32,
>> +		.reg_stride = 4,
>> +		.val_bits = 32,
>> +		.fast_io = true,
>> +};
>> +
>> +
>> +/* Get the slice entry by index */
>> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device 
>> *dev, int n)
> 
> drop this *slice* word from function names
> 
>> +{
>> +	struct of_phandle_args phargs;
>> +	struct llcc_drv_data *drv;
>> +	const struct llcc_slice_config *llcc_data_ptr;
>> +	struct llcc_slice_desc *desc;
>> +	struct platform_device *pdev;
>> +	u32 sz, count;
>> +
>> +	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
>> +				       "#cache-cells", n, &phargs)) {
>> +		pr_err("can't parse \"cache-slices\" property\n");
> 
> drop all pr_err here and below.
> 
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	pdev = of_find_device_by_node(phargs.np);
>> +	if (!pdev) {
>> +		pr_err("Cannot find platform device from phandle\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	drv = platform_get_drvdata(pdev);
>> +	if (!drv) {
>> +		pr_err("cannot find platform driver data\n");
>> +		return ERR_PTR(-EFAULT);
>> +	}
>> +
>> +	llcc_data_ptr = drv->slice_data;
>> +	sz = drv->llcc_config_data_sz;
>> +	count = 0;
>> +
>> +	while (llcc_data_ptr && count < sz) {
>> +		if (llcc_data_ptr->usecase_id == phargs.args[0])
>> +			break;
>> +		llcc_data_ptr++;
>> +		count++;
>> +	}
>> +
>> +	if (llcc_data_ptr == NULL || count == sz) {
>> +		pr_err("can't find %d usecase id\n", phargs.args[0]);
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
>> +	if (!desc)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	desc->llcc_slice_id = llcc_data_ptr->slice_id;
>> +	desc->llcc_slice_size = llcc_data_ptr->max_cap;
>> +	desc->dev = &pdev->dev;
>> +
>> +	return desc;
>> +}
>> +
>> +/**
>> + * llcc_slice_getd - get llcc slice descriptor
>> + * @dev: Device pointer of the client
>> + * @name: Name of the use case
>> + *
>> + * A pointer to llcc slice descriptor will be returned on success and
>> + * and error pointer is returned on failure
>> + */
>> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const 
>> char *name)
>> +{
>> +	struct device_node *np = dev->of_node;
>> +	int index = 0;
>> +	const char *slice_name;
>> +	struct property *prop;
>> +
>> +	if (!np) {
>> +		dev_err(dev, "%s() currently only supports DT\n", __func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	if (!of_get_property(np, "cache-slice-names", NULL)) {
>> +		dev_err(dev,
>> +			"%s() requires a \"cache-slice-names\" property\n",
>> +			__func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	of_property_for_each_string(np, "cache-slice-names", prop, 
>> slice_name) {
>> +		if (!strcmp(name, slice_name))
>> +			break;
>> +		index++;
>> +	}
>> +
>> +	return llcc_slice_get_entry(dev, index);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_getd);
> 
> should be EXPORT_SYMBOL_GPL here and on all other places.
> 
>> +
>> +/**
>> + * llcc_slice_putd - llcc slice descritpor
>> + * @desc: Pointer to llcc slice descriptor
>> + */
>> +void llcc_slice_putd(struct llcc_slice_desc *desc)
>> +{
>> +	kfree(desc);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_putd);
>> +
>> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
>> +				u32 act_ctrl_reg_val, u32 status)
>> +{
>> +	u32 act_ctrl_reg;
>> +	u32 status_reg;
>> +	u32 slice_status;
>> +	unsigned long timeout;
>> +
>> +	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
>> +	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
>> +
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> 
> check for regmap_write error? Infact you don't check for regmap errors
> at all.
> 
>> +
>> +	/* Make sure the activate trigger is applied before clearing it */
>> +	mb();
>> +
>> +	/* Clear the ACTIVE trigger */
>> +	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
>> +
>> +	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
>> +	while (time_before(jiffies, timeout)) {
>> +		regmap_read(drv->llcc_map, status_reg, &slice_status);
>> +		if (!(slice_status & status))
>> +			return 0;
>> +	}
>> +
>> +	return -ETIMEDOUT;
>> +}
>> +
>> +/**
>> + * llcc_slice_activate - Activate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_activate(struct llcc_slice_desc *desc)
>> +{
>> +	int rc = -EINVAL;
> 
> please use 'ret' for variable name, here and on all other places.
> 
>> +	u32 act_ctrl_val;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
> 
> return -EINVAL;
> 
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +
>> +	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  DEACTIVATE);
>> +
>> +	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_activate);
>> +
>> +/**
>> + * llcc_slice_deactivate - Deactivate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> 
> just llcc_activate
> 
>> +{
>> +	u32 act_ctrl_val;
>> +	int rc = -EINVAL;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  ACTIVATE);
>> +
>> +	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_deactivate);
>> +
>> +/**
>> + * llcc_get_slice_id - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and a negative errno 
>> will
>> + * be returned on error
>> + */
>> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return -EINVAL;
>> +
>> +	return desc->llcc_slice_id;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_id);
>> +
>> +/**
>> + * llcc_get_slice_size - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and zero will 
>> returned on
>> + * error
>> + */
>> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return 0;
>> +
>> +	return desc->llcc_slice_size;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_size);
>> +
>> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
>> +{
>> +	int i;
>> +	u32 attr1_cfg;
>> +	u32 attr0_cfg;
>> +	u32 attr1_val;
>> +	u32 attr0_val;
>> +	u32 max_cap_cacheline;
>> +	u32 sz;
>> +	const struct llcc_slice_config *llcc_table;
>> +	struct llcc_slice_desc desc;
>> +	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
>> +	u32 b_off = drv->b_off;
>> +
>> +	sz = drv->llcc_config_data_sz;
>> +	llcc_table = drv->slice_data;
>> +
>> +	for (i = 0; i < sz; i++) {
>> +		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
>> +		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
>> +
>> +		attr1_val = llcc_table[i].cache_mode;
>> +		attr1_val |= (llcc_table[i].probe_target_ways <<
>> +				ATTR1_PROBE_TARGET_WAYS_SHIFT);
> 
> braces are not needed, here and below.
> 
>> +		attr1_val |= (llcc_table[i].fixed_size <<
>> +				ATTR1_FIXED_SIZE_SHIFT);
>> +		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
>> +
>> +		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
>> +
>> +		/* LLCC instances can vary for each target.
>> +		 * The SW writes to broadcast register which gets propagated
>> +		 * to each llcc instace (llcc0,.. llccN).
>> +		 * Since the size of the memory is divided equally amongst the
>> +		 * llcc instances, we need to configure the max cap accordingly.
>> +		 */
>> +		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
>> +		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
>> +		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
>> +
>> +		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
>> +		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
>> +
>> +		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
>> +		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
>> +
>> +		/* Make sure that the SCT is programmed before activating */
>> +		mb();
> 
> shouldn't this be wmb()?
> 
>> +
>> +		if (llcc_table[i].activate_on_init) {
>> +			desc.llcc_slice_id = llcc_table[i].slice_id;
>> +			desc.dev = &pdev->dev;
>> +			if (llcc_slice_activate(&desc)) {
>> +				pr_err("activate slice id: %d timed out\n",
>> +						desc.llcc_slice_id);
> 
> Make the fucntion to return int and propagate the error. And please 
> drop
> all pr_err.
> 
>> +			}
>> +		}
>> +	}
>> +}
>> +
>> +int qcom_llcc_probe(struct platform_device *pdev,
>> +		      const struct llcc_slice_config *llcc_cfg, u32 sz)
>> +{
>> +	int rc = 0;
>> +	u32 num_banks = 0;
>> +	struct device *dev = &pdev->dev;
>> +	static struct llcc_drv_data *drv_data;
> 
> static ??
> 
>> +	struct resource *res;
>> +	void __iomem *base;
>> +
>> +	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>> +	if (!drv_data)
>> +		return PTR_ERR(drv_data);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	base = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(base)) {
>> +		dev_err(&pdev->dev, "Cannot find the resource in device\n");
> 
> this error message is not needed.
> 
>> +		return PTR_ERR(base);
>> +	}
>> +
>> +	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, 
>> &llcc_regmap_config);
>> +	if (IS_ERR(drv_data->llcc_map)) {
>> +		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
> 
> again not needed.
> 
>> +		return PTR_ERR(drv_data->llcc_map);
>> +	}
>> +
>> +	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
>> +		    &num_banks);
>> +
>> +	num_banks &= LLCC_LB_CNT_MASK;
>> +	num_banks >>= LLCC_LB_CNT_SHIFT;
>> +	drv_data->num_banks = num_banks;
>> +
>> +	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
>> +				  &drv_data->max_slices);
>> +	if (rc) {
>> +		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
> 
> and this too.
> 
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return rc;
>> +	}
> 
> need blank line here.
> 
>> +	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), 
>> GFP_KERNEL);
>> +	if (!drv_data->offsets) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->offsets);
>> +	}
>> +
>> +	drv_data->offsets[0] = 0x0;
>> +	drv_data->offsets[1] = 0x80000;
>> +	drv_data->offsets[2] = 0x100000;
>> +	drv_data->offsets[3] = 0x180000;
>> +	drv_data->b_off = 0x200000;
> 
> shouln't this be SoC or llcc version specific?
> 
>> +
>> +	drv_data->llcc_slice_map = 
>> kcalloc(BITS_TO_LONGS(drv_data->max_slices),
>> +				   sizeof(unsigned long), GFP_KERNEL);
>> +
>> +	if (!drv_data->llcc_slice_map) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->llcc_slice_map);
>> +	}
>> +
>> +	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
>> +	drv_data->slice_data = llcc_cfg;
>> +	drv_data->llcc_config_data_sz = sz;
>> +	mutex_init(&drv_data->slice_mutex);
>> +	platform_set_drvdata(pdev, drv_data);
>> +
>> +	qcom_llcc_cfg_program(pdev);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_probe);
>> +
>> +int qcom_llcc_remove(struct platform_device *pdev)
>> +{
>> +	static struct llcc_drv_data *drv_data;
>> +
>> +	drv_data = platform_get_drvdata(pdev);
>> +
>> +	mutex_destroy(&drv_data->slice_mutex);
>> +	kfree(drv_data->llcc_slice_map);
>> +	devm_kfree(&pdev->dev, drv_data);
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_remove);
>> diff --git a/include/linux/soc/qcom/llcc-qcom.h 
>> b/include/linux/soc/qcom/llcc-qcom.h
>> new file mode 100644
>> index 0000000..c408a8d
>> --- /dev/null
>> +++ b/include/linux/soc/qcom/llcc-qcom.h
>> @@ -0,0 +1,178 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __LLCC_QCOM__
>> +#define __LLCC_QCOM__
>> +
>> +/**
>> + * llcc_slice_desc - Cache slice descriptor
>> + * @llcc_slice_id: llcc slice id
>> + * @llcc_slice_size: Size allocated for the llcc slice
>> + * @dev: pointer to llcc device
>> + */
>> +struct llcc_slice_desc {
> 
> 'llcc_desc' is enough.
> 
>> +	int llcc_slice_id;
> 
> 'slice_id' or even better 'id'.
> 
>> +	size_t llcc_slice_size;
> 
> 'slice_size' or just 'size'
> 
>> +	struct device *dev;
>> +};
>> +
>> +/**
>> + * llcc_slice_config - Data associated with the llcc slice
>> + * @name: name of the use case associated with the llcc slice
>> + * @usecase_id: usecase id for which the llcc slice is used
>> + * @slice_id: llcc slice id assigned to each slice
>> + * @max_cap: maximum capacity of the llcc slice
>> + * @priority: priority of the llcc slice
>> + * @fixed_size: whether the llcc slice can grow beyond its size
>> + * @bonus_ways: bonus ways associated with llcc slice
>> + * @res_ways: reserved ways associated with llcc slice
>> + * @cache_mode: mode of the llcce slice
>> + * @probe_target_ways: Probe only reserved and bonus ways on a cache 
>> miss
>> + * @dis_cap_alloc: Disable capacity based allocation
>> + * @retain_on_pc: Retain through power collapse
>> + * @activate_on_init: activate the slice on init
>> + */
>> +struct llcc_slice_config {
> 
> Once you move struct llcc_slice_config sdm845_data in llcc.c this
> structure must not be exported.
> 
>> +	const char *name;
>> +	int usecase_id;
> 
> unsigned int?
> 
>> +	int slice_id;
> 
> unsingned int?
> 
>> +	u32 max_cap;
>> +	u32 priority;
>> +	bool fixed_size;
>> +	u32 bonus_ways;
>> +	u32 res_ways;
>> +	u32 cache_mode;
>> +	u32 probe_target_ways;
>> +	bool dis_cap_alloc;
>> +	bool retain_on_pc;
>> +	u32 activate_on_init;
>> +};
>> +
>> +/**
>> + * llcc_drv_data - Data associated with the llcc driver
>> + * @llcc_map: regmap associated with the llcc device
>> + * @slice_data: pointer to the data structure associated with slice
> 
> should be better 'data structure for slice configuration'?
> 
>> + * @slice_mutex: mutex associated with each slice
>> + * @llcc_config_data_sz: size of the config data table
>> + * @max_slices: max slices as read from device tree
>> + * @b_off: Offset of the broadcast bank
>> + * @num_banks: Number of llcc banks
>> + * @llcc_slice_map: Bit map to track the active slice ids
>> + * @offsets: Pointer to the bank offsets array
>> + */
>> +
>> +struct llcc_drv_data {
>> +		struct regmap *llcc_map;
> 
> s/llcc_map/regmap
> 
>> +		const struct llcc_slice_config *slice_data;
> 
> s/slice_data/cfg
> 
>> +		struct mutex slice_mutex;
> 
> just 'lock'
> 
>> +		u32 llcc_config_data_sz;
> 
> cfg_size?
> 
>> +		u32 max_slices;
>> +		u32 b_off;
>> +		u32 num_banks;
>> +		unsigned long *llcc_slice_map;
> 
> only 'bitmap'?
> 
>> +		u32 *offsets;
>> +};
>> +
>> +
> 
> <cut>

-- 
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[Trilok Soni]

Hi Stanimir,

+/* Get the slice entry by index */
>> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev, int n)
> drop this *slice* word from function names

Please note that we are activating/de-activating  a "slice" of the LLCC 
and not a whole LLCC. "slice" makes perfect sense here since the 
granularity is at the "slice" level and not the complete LLCC.

--Trilok Soni

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Trilok Soni]

Hi Stanimir,

+/* Get the slice entry by index */
>> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device *dev, int n)
> drop this *slice* word from function names

Please note that we are activating/de-activating? a "slice" of the LLCC 
and not a whole LLCC. "slice" makes perfect sense here since the 
granularity is at the "slice" level and not the complete LLCC.

--Trilok Soni

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[Stanimir Varbanov]

Hi,

Please adjust your mail client to drop on new line on 80 column!

On 03/29/2018 08:55 PM, Channa wrote:
> On 2018-03-29 01:08, Stanimir Varbanov wrote:
>> Hi,
>>
>> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>>> LLCC (Last Level Cache Controller) provides additional cache memory
>>> in the system. LLCC is partitioned into muliple slices and each
>>> slice getting its own priority, size, ID and other config parameters.
>>> LLCC driver programs these parameters for each slice. Clients that
>>> are assigned to use LLCC need to get information such size & ID of the
>>>  slice they get and activate or deactivate the slice as needed. LLCC
>>> driver
>>> provides API interfaces for the clients to perform these operations.
>>>
>>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>>> ---
>>>  drivers/soc/qcom/Kconfig           |  16 ++
>>>  drivers/soc/qcom/Makefile          |   2 +
>>>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>>>  drivers/soc/qcom/llcc-slice.c      | 454
>>> +++++++++++++++++++++++++++++++++++++
>>
>> I'd name it just llcc.c, slice suffix didn't add any value.
>>
>>>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>>  5 files changed, 770 insertions(+)
>>>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>>>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>>>
>>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>>> index e050eb8..28237fc 100644
>>> --- a/drivers/soc/qcom/Kconfig
>>> +++ b/drivers/soc/qcom/Kconfig
>>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>>            functions for connecting the underlying serial UART, SPI,
>>> and I2C
>>>            devices to the output pins.
>>>
>>> +config QCOM_LLCC
>>> +    tristate "Qualcomm Technologies, Inc. LLCC driver"
>>> +    depends on ARCH_QCOM
>>> +    help
>>> +      Qualcomm Technologies, Inc. platform specific LLCC driver for
>>> Last
>>> +      Level Cache. This provides interfaces to client's that use the
>>> LLCC.
>>> +      Say yes here to enable LLCC slice driver.
>>> +
>>> +config QCOM_SDM845_LLCC
>>> +    tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>>> +    depends on QCOM_LLCC
>>> +    help
>>> +      Say yes here to enable the LLCC driver for SDM845. This is
>>> provides
>>> +      data required to configure LLCC so that clients can start
>>> using the
>>> +      LLCC slices.
>>> +
>>>  config QCOM_MDT_LOADER
>>>      tristate
>>>      select QCOM_SCM
>>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>>> index dcebf28..e16d6a2 100644
>>> --- a/drivers/soc/qcom/Makefile
>>> +++ b/drivers/soc/qcom/Makefile
>>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>>  obj-$(CONFIG_QCOM_SMP2P)    += smp2p.o
>>>  obj-$(CONFIG_QCOM_SMSM)    += smsm.o
>>>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>>> diff --git a/drivers/soc/qcom/llcc-sdm845.c
>>> b/drivers/soc/qcom/llcc-sdm845.c
>>> new file mode 100644
>>> index 0000000..cd431d9
>>> --- /dev/null
>>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>>> @@ -0,0 +1,120 @@
>>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 and
>>> + * only version 2 as published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/err.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/soc/qcom/llcc-qcom.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include <linux/regmap.h>
>>> +
>>> +
>>> +/*
>>> + * SCT entry contains of the following parameters
>>> + * name: Name of the client's use case for which the llcc slice is used
>>> + * uid: Unique id for the client's use case
>>> + * slice_id: llcc slice id for each client
>>> + * max_cap: The maximum capacity of the cache slice provided in KB
>>> + * priority: Priority of the client used to select victim line for
>>> replacement
>>> + * fixed_size: Determine of the slice has a fixed capacity
>>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used
>>> only if
>>> + *             it't not a reserved way.
>>> + * res_ways: Reserved ways for the cache slice, the reserved ways
>>> cannot be used
>>> + *           by any other client than the one its assigned to.
>>> + * cache_mode: Each slice operates as a cache, this controls the
>>> mode of the
>>> + *             slice normal or TCM
>>> + * probe_target_ways: Determines what ways to probe for access hit.
>>> When
>>> + *                    configured to 1 only bonus and reseved ways
>>> are probed.
>>> + *                    when configured to 0 all ways in llcc are probed.
>>> + * dis_cap_alloc: Disable capacity based allocation for a client
>>> + * retain_on_pc: If this bit is set and client has maitained active
>>> vote
>>> + *               then the ways assigned to this client are not
>>> flushed on power
>>> + *               collapse.
>>> + * activate_on_init: Activate the slice immidiately after the SCT is
>>> programmed
>>> + */
>>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw,
>>> dca, rp, a) \
>>> +    {                    \
>>> +        .name = n,            \
>>> +        .usecase_id = uid,        \
>>> +        .slice_id = sid,        \
>>> +        .max_cap = mc,            \
>>> +        .priority = p,            \
>>> +        .fixed_size = fs,        \
>>> +        .bonus_ways = bway,        \
>>> +        .res_ways = rway,        \
>>> +        .cache_mode = cmod,        \
>>> +        .probe_target_ways = ptw,    \
>>> +        .dis_cap_alloc = dca,        \
>>> +        .retain_on_pc = rp,        \
>>> +        .activate_on_init = a,        \
>>> +    }
>>> +
>>> +
>>> +static struct llcc_slice_config sdm845_data[] =  {
>>> +    SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 1),
>>> +    SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
>>> 1, 0),
>>> +    SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
>>> 1, 0),
>>> +    SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1,
>>> 1, 0),
>>> +    SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 0),
>>> +    SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 0),
>>> +    SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 0),
>>> +    SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1,
>>> 1, 0),
>>> +    SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1,
>>> 0, 1),
>>> +    SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0,
>>> 1, 1, 0),
>>> +    SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +};
>>> +
>>> +
>>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>>> +{
>>> +    return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
>>
>> I think having separate driver just for this config structure is
>> pointless. Please move this in llcc driver and select the configuration
>> based on compatible string.
> 
> Thanks Stan for your review.
> 
> Wanted to highlight the reason we chose this approach. The System cache
> table data
> changes from chipset to chipset and overtime the table could have more
> parameters.
> Adding it as part of the core driver and selecting the table based on
> compatible
> would clutter the core driver. If we have 4 chipsets supporting system
> cache then
> core driver would have 4 tables as above and we select one of them based
> on compatible
> string. That is why we followed the pin control approach to have data in
> per chipset
> driver and pass it to common driver.

OK, do you plan to extend this with some more code?

-- 
regards,
Stan

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Stanimir Varbanov]

Hi,

Please adjust your mail client to drop on new line on 80 column!

On 03/29/2018 08:55 PM, Channa wrote:
> On 2018-03-29 01:08, Stanimir Varbanov wrote:
>> Hi,
>>
>> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>>> LLCC (Last Level Cache Controller) provides additional cache memory
>>> in the system. LLCC is partitioned into muliple slices and each
>>> slice getting its own priority, size, ID and other config parameters.
>>> LLCC driver programs these parameters for each slice. Clients that
>>> are assigned to use LLCC need to get information such size & ID of the
>>> ?slice they get and activate or deactivate the slice as needed. LLCC
>>> driver
>>> provides API interfaces for the clients to perform these operations.
>>>
>>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>>> ---
>>> ?drivers/soc/qcom/Kconfig?????????? |? 16 ++
>>> ?drivers/soc/qcom/Makefile????????? |?? 2 +
>>> ?drivers/soc/qcom/llcc-sdm845.c???? | 120 ++++++++++
>>> ?drivers/soc/qcom/llcc-slice.c????? | 454
>>> +++++++++++++++++++++++++++++++++++++
>>
>> I'd name it just llcc.c, slice suffix didn't add any value.
>>
>>> ?include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>> ?5 files changed, 770 insertions(+)
>>> ?create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>> ?create mode 100644 drivers/soc/qcom/llcc-slice.c
>>> ?create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>>>
>>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>>> index e050eb8..28237fc 100644
>>> --- a/drivers/soc/qcom/Kconfig
>>> +++ b/drivers/soc/qcom/Kconfig
>>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>> ?????????? functions for connecting the underlying serial UART, SPI,
>>> and I2C
>>> ?????????? devices to the output pins.
>>>
>>> +config QCOM_LLCC
>>> +??? tristate "Qualcomm Technologies, Inc. LLCC driver"
>>> +??? depends on ARCH_QCOM
>>> +??? help
>>> +????? Qualcomm Technologies, Inc. platform specific LLCC driver for
>>> Last
>>> +????? Level Cache. This provides interfaces to client's that use the
>>> LLCC.
>>> +????? Say yes here to enable LLCC slice driver.
>>> +
>>> +config QCOM_SDM845_LLCC
>>> +??? tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>>> +??? depends on QCOM_LLCC
>>> +??? help
>>> +????? Say yes here to enable the LLCC driver for SDM845. This is
>>> provides
>>> +????? data required to configure LLCC so that clients can start
>>> using the
>>> +????? LLCC slices.
>>> +
>>> ?config QCOM_MDT_LOADER
>>> ???? tristate
>>> ???? select QCOM_SCM
>>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>>> index dcebf28..e16d6a2 100644
>>> --- a/drivers/soc/qcom/Makefile
>>> +++ b/drivers/soc/qcom/Makefile
>>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>> ?obj-$(CONFIG_QCOM_SMP2P)??? += smp2p.o
>>> ?obj-$(CONFIG_QCOM_SMSM)??? += smsm.o
>>> ?obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>>> diff --git a/drivers/soc/qcom/llcc-sdm845.c
>>> b/drivers/soc/qcom/llcc-sdm845.c
>>> new file mode 100644
>>> index 0000000..cd431d9
>>> --- /dev/null
>>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>>> @@ -0,0 +1,120 @@
>>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 and
>>> + * only version 2 as published by the Free Software Foundation.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.? See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/err.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/soc/qcom/llcc-qcom.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include <linux/regmap.h>
>>> +
>>> +
>>> +/*
>>> + * SCT entry contains of the following parameters
>>> + * name: Name of the client's use case for which the llcc slice is used
>>> + * uid: Unique id for the client's use case
>>> + * slice_id: llcc slice id for each client
>>> + * max_cap: The maximum capacity of the cache slice provided in KB
>>> + * priority: Priority of the client used to select victim line for
>>> replacement
>>> + * fixed_size: Determine of the slice has a fixed capacity
>>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used
>>> only if
>>> + *???????????? it't not a reserved way.
>>> + * res_ways: Reserved ways for the cache slice, the reserved ways
>>> cannot be used
>>> + *?????????? by any other client than the one its assigned to.
>>> + * cache_mode: Each slice operates as a cache, this controls the
>>> mode of the
>>> + *???????????? slice normal or TCM
>>> + * probe_target_ways: Determines what ways to probe for access hit.
>>> When
>>> + *??????????????????? configured to 1 only bonus and reseved ways
>>> are probed.
>>> + *??????????????????? when configured to 0 all ways in llcc are probed.
>>> + * dis_cap_alloc: Disable capacity based allocation for a client
>>> + * retain_on_pc: If this bit is set and client has maitained active
>>> vote
>>> + *?????????????? then the ways assigned to this client are not
>>> flushed on power
>>> + *?????????????? collapse.
>>> + * activate_on_init: Activate the slice immidiately after the SCT is
>>> programmed
>>> + */
>>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw,
>>> dca, rp, a) \
>>> +??? {??????????????????? \
>>> +??????? .name = n,??????????? \
>>> +??????? .usecase_id = uid,??????? \
>>> +??????? .slice_id = sid,??????? \
>>> +??????? .max_cap = mc,??????????? \
>>> +??????? .priority = p,??????????? \
>>> +??????? .fixed_size = fs,??????? \
>>> +??????? .bonus_ways = bway,??????? \
>>> +??????? .res_ways = rway,??????? \
>>> +??????? .cache_mode = cmod,??????? \
>>> +??????? .probe_target_ways = ptw,??? \
>>> +??????? .dis_cap_alloc = dca,??????? \
>>> +??????? .retain_on_pc = rp,??????? \
>>> +??????? .activate_on_init = a,??????? \
>>> +??? }
>>> +
>>> +
>>> +static struct llcc_slice_config sdm845_data[] =? {
>>> +??? SCT_ENTRY("cpuss",?????? 1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 1),
>>> +??? SCT_ENTRY("vidsc0",????? 2, 2, 512, 2, 1, 0x0,? 0x0F0, 0, 0, 1,
>>> 1, 0),
>>> +??? SCT_ENTRY("vidsc1",????? 3, 3, 512, 2, 1, 0x0,? 0x0F0, 0, 0, 1,
>>> 1, 0),
>>> +??? SCT_ENTRY("rotator",???? 4, 4, 563, 2, 1, 0x0,? 0x00e, 2, 0, 1,
>>> 1, 0),
>>> +??? SCT_ENTRY("voice",?????? 5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 0),
>>> +??? SCT_ENTRY("audio",?????? 6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 0),
>>> +??? SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("modem",?????? 8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>> 1, 0),
>>> +??? SCT_ENTRY("compute",???? 10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("gpuhtw",????? 11, 11, 512, 1, 1, 0xC,? 0x0, 0, 0, 1,
>>> 1, 0),
>>> +??? SCT_ENTRY("gpu",???????? 12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("mmuhwt",????? 13, 13, 256, 2, 0, 0x0,? 0x1, 0, 0, 1,
>>> 0, 1),
>>> +??? SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("display",???? 16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("videofw",???? 17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,? 0xF00, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0,
>>> 1, 1, 0),
>>> +??? SCT_ENTRY("audiohw",???? 22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0,
>>> 1, 1, 0),
>>> +};
>>> +
>>> +
>>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>>> +{
>>> +??? return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
>>
>> I think having separate driver just for this config structure is
>> pointless. Please move this in llcc driver and select the configuration
>> based on compatible string.
> 
> Thanks Stan for your review.
> 
> Wanted to highlight the reason we chose this approach. The System cache
> table data
> changes from chipset to chipset and overtime the table could have more
> parameters.
> Adding it as part of the core driver and selecting the table based on
> compatible
> would clutter the core driver. If we have 4 chipsets supporting system
> cache then
> core driver would have 4 tables as above and we select one of them based
> on compatible
> string. That is why we followed the pin control approach to have data in
> per chipset
> driver and pass it to common driver.

OK, do you plan to extend this with some more code?

-- 
regards,
Stan

Re: [PATCH v3 1/2] Documentation: Documentation for qcom, llcc

[Rob Herring]

On Tue, Mar 27, 2018 at 1:52 PM, Rishabh Bhatnagar
<rishabhb@codeaurora.org> wrote:
> Documentation for last level cache controller device tree bindings,
> client bindings usage examples.
>
> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  .../devicetree/bindings/arm/msm/qcom,llcc.txt      | 70 ++++++++++++++++++++++

Bindings need to go to DT list for review.

Rob

[PATCH v3 1/2] Documentation: Documentation for qcom, llcc

[Rob Herring]

On Tue, Mar 27, 2018 at 1:52 PM, Rishabh Bhatnagar
<rishabhb@codeaurora.org> wrote:
> Documentation for last level cache controller device tree bindings,
> client bindings usage examples.
>
> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
> ---
>  .../devicetree/bindings/arm/msm/qcom,llcc.txt      | 70 ++++++++++++++++++++++

Bindings need to go to DT list for review.

Rob

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[Channa]

On 2018-04-02 02:11, Stanimir Varbanov wrote:
> Hi,
> 
> Please adjust your mail client to drop on new line on 80 column!
> 
> On 03/29/2018 08:55 PM, Channa wrote:
>> On 2018-03-29 01:08, Stanimir Varbanov wrote:
>>> Hi,
>>> 
>>> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>>>> LLCC (Last Level Cache Controller) provides additional cache memory
>>>> in the system. LLCC is partitioned into muliple slices and each
>>>> slice getting its own priority, size, ID and other config 
>>>> parameters.
>>>> LLCC driver programs these parameters for each slice. Clients that
>>>> are assigned to use LLCC need to get information such size & ID of 
>>>> the
>>>>  slice they get and activate or deactivate the slice as needed. LLCC
>>>> driver
>>>> provides API interfaces for the clients to perform these operations.
>>>> 
>>>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>>>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>>>> ---
>>>>  drivers/soc/qcom/Kconfig           |  16 ++
>>>>  drivers/soc/qcom/Makefile          |   2 +
>>>>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>>>>  drivers/soc/qcom/llcc-slice.c      | 454
>>>> +++++++++++++++++++++++++++++++++++++
>>> 
>>> I'd name it just llcc.c, slice suffix didn't add any value.
>>> 
>>>>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>>>  5 files changed, 770 insertions(+)
>>>>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>>>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>>>>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>>>> 
>>>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>>>> index e050eb8..28237fc 100644
>>>> --- a/drivers/soc/qcom/Kconfig
>>>> +++ b/drivers/soc/qcom/Kconfig
>>>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>>>            functions for connecting the underlying serial UART, SPI,
>>>> and I2C
>>>>            devices to the output pins.
>>>> 
>>>> +config QCOM_LLCC
>>>> +    tristate "Qualcomm Technologies, Inc. LLCC driver"
>>>> +    depends on ARCH_QCOM
>>>> +    help
>>>> +      Qualcomm Technologies, Inc. platform specific LLCC driver for
>>>> Last
>>>> +      Level Cache. This provides interfaces to client's that use 
>>>> the
>>>> LLCC.
>>>> +      Say yes here to enable LLCC slice driver.
>>>> +
>>>> +config QCOM_SDM845_LLCC
>>>> +    tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>>>> +    depends on QCOM_LLCC
>>>> +    help
>>>> +      Say yes here to enable the LLCC driver for SDM845. This is
>>>> provides
>>>> +      data required to configure LLCC so that clients can start
>>>> using the
>>>> +      LLCC slices.
>>>> +
>>>>  config QCOM_MDT_LOADER
>>>>      tristate
>>>>      select QCOM_SCM
>>>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>>>> index dcebf28..e16d6a2 100644
>>>> --- a/drivers/soc/qcom/Makefile
>>>> +++ b/drivers/soc/qcom/Makefile
>>>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>>>  obj-$(CONFIG_QCOM_SMP2P)    += smp2p.o
>>>>  obj-$(CONFIG_QCOM_SMSM)    += smsm.o
>>>>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>>>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>>>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>>>> diff --git a/drivers/soc/qcom/llcc-sdm845.c
>>>> b/drivers/soc/qcom/llcc-sdm845.c
>>>> new file mode 100644
>>>> index 0000000..cd431d9
>>>> --- /dev/null
>>>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>>>> @@ -0,0 +1,120 @@
>>>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>>>> reserved.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or 
>>>> modify
>>>> + * it under the terms of the GNU General Public License version 2 
>>>> and
>>>> + * only version 2 as published by the Free Software Foundation.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful,
>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>>> + * GNU General Public License for more details.
>>>> + */
>>>> +
>>>> +#include <linux/err.h>
>>>> +#include <linux/kernel.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/of.h>
>>>> +#include <linux/of_device.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/soc/qcom/llcc-qcom.h>
>>>> +#include <linux/mfd/syscon.h>
>>>> +#include <linux/regmap.h>
>>>> +
>>>> +
>>>> +/*
>>>> + * SCT entry contains of the following parameters
>>>> + * name: Name of the client's use case for which the llcc slice is 
>>>> used
>>>> + * uid: Unique id for the client's use case
>>>> + * slice_id: llcc slice id for each client
>>>> + * max_cap: The maximum capacity of the cache slice provided in KB
>>>> + * priority: Priority of the client used to select victim line for
>>>> replacement
>>>> + * fixed_size: Determine of the slice has a fixed capacity
>>>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is 
>>>> used
>>>> only if
>>>> + *             it't not a reserved way.
>>>> + * res_ways: Reserved ways for the cache slice, the reserved ways
>>>> cannot be used
>>>> + *           by any other client than the one its assigned to.
>>>> + * cache_mode: Each slice operates as a cache, this controls the
>>>> mode of the
>>>> + *             slice normal or TCM
>>>> + * probe_target_ways: Determines what ways to probe for access hit.
>>>> When
>>>> + *                    configured to 1 only bonus and reseved ways
>>>> are probed.
>>>> + *                    when configured to 0 all ways in llcc are 
>>>> probed.
>>>> + * dis_cap_alloc: Disable capacity based allocation for a client
>>>> + * retain_on_pc: If this bit is set and client has maitained active
>>>> vote
>>>> + *               then the ways assigned to this client are not
>>>> flushed on power
>>>> + *               collapse.
>>>> + * activate_on_init: Activate the slice immidiately after the SCT 
>>>> is
>>>> programmed
>>>> + */
>>>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw,
>>>> dca, rp, a) \
>>>> +    {                    \
>>>> +        .name = n,            \
>>>> +        .usecase_id = uid,        \
>>>> +        .slice_id = sid,        \
>>>> +        .max_cap = mc,            \
>>>> +        .priority = p,            \
>>>> +        .fixed_size = fs,        \
>>>> +        .bonus_ways = bway,        \
>>>> +        .res_ways = rway,        \
>>>> +        .cache_mode = cmod,        \
>>>> +        .probe_target_ways = ptw,    \
>>>> +        .dis_cap_alloc = dca,        \
>>>> +        .retain_on_pc = rp,        \
>>>> +        .activate_on_init = a,        \
>>>> +    }
>>>> +
>>>> +
>>>> +static struct llcc_slice_config sdm845_data[] =  {
>>>> +    SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 1),
>>>> +    SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
>>>> 1, 0),
>>>> +    SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1,
>>>> 1, 0),
>>>> +    SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1,
>>>> 1, 0),
>>>> +    SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 0),
>>>> +    SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 0),
>>>> +    SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 0),
>>>> +    SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1,
>>>> 1, 0),
>>>> +    SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1,
>>>> 0, 1),
>>>> +    SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0,
>>>> 1, 1, 0),
>>>> +    SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +};
>>>> +
>>>> +
>>>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>>>> +{
>>>> +    return qcom_llcc_probe(pdev, sdm845_data, 
>>>> ARRAY_SIZE(sdm845_data));
>>> 
>>> I think having separate driver just for this config structure is
>>> pointless. Please move this in llcc driver and select the 
>>> configuration
>>> based on compatible string.
>> 
>> Thanks Stan for your review.
>> 
>> Wanted to highlight the reason we chose this approach. The System 
>> cache
>> table data
>> changes from chipset to chipset and overtime the table could have more
>> parameters.
>> Adding it as part of the core driver and selecting the table based on
>> compatible
>> would clutter the core driver. If we have 4 chipsets supporting system
>> cache then
>> core driver would have 4 tables as above and we select one of them 
>> based
>> on compatible
>> string. That is why we followed the pin control approach to have data 
>> in
>> per chipset
>> driver and pass it to common driver.
> 
> OK, do you plan to extend this with some more code?

Not this particular file, this is chipset specific file. We don't expect
more changes to this file.
A new driver is added for every chipset, so the data maintained here 
could
change in future. So the idea is to keep the chipset driver separate
from core driver.

-- 
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,
a Linux Foundation Collaborative Project

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Channa]

On 2018-04-02 02:11, Stanimir Varbanov wrote:
> Hi,
> 
> Please adjust your mail client to drop on new line on 80 column!
> 
> On 03/29/2018 08:55 PM, Channa wrote:
>> On 2018-03-29 01:08, Stanimir Varbanov wrote:
>>> Hi,
>>> 
>>> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>>>> LLCC (Last Level Cache Controller) provides additional cache memory
>>>> in the system. LLCC is partitioned into muliple slices and each
>>>> slice getting its own priority, size, ID and other config 
>>>> parameters.
>>>> LLCC driver programs these parameters for each slice. Clients that
>>>> are assigned to use LLCC need to get information such size & ID of 
>>>> the
>>>> ?slice they get and activate or deactivate the slice as needed. LLCC
>>>> driver
>>>> provides API interfaces for the clients to perform these operations.
>>>> 
>>>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>>>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>>>> ---
>>>> ?drivers/soc/qcom/Kconfig?????????? |? 16 ++
>>>> ?drivers/soc/qcom/Makefile????????? |?? 2 +
>>>> ?drivers/soc/qcom/llcc-sdm845.c???? | 120 ++++++++++
>>>> ?drivers/soc/qcom/llcc-slice.c????? | 454
>>>> +++++++++++++++++++++++++++++++++++++
>>> 
>>> I'd name it just llcc.c, slice suffix didn't add any value.
>>> 
>>>> ?include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>>> ?5 files changed, 770 insertions(+)
>>>> ?create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>>> ?create mode 100644 drivers/soc/qcom/llcc-slice.c
>>>> ?create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>>>> 
>>>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>>>> index e050eb8..28237fc 100644
>>>> --- a/drivers/soc/qcom/Kconfig
>>>> +++ b/drivers/soc/qcom/Kconfig
>>>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>>> ?????????? functions for connecting the underlying serial UART, SPI,
>>>> and I2C
>>>> ?????????? devices to the output pins.
>>>> 
>>>> +config QCOM_LLCC
>>>> +??? tristate "Qualcomm Technologies, Inc. LLCC driver"
>>>> +??? depends on ARCH_QCOM
>>>> +??? help
>>>> +????? Qualcomm Technologies, Inc. platform specific LLCC driver for
>>>> Last
>>>> +????? Level Cache. This provides interfaces to client's that use 
>>>> the
>>>> LLCC.
>>>> +????? Say yes here to enable LLCC slice driver.
>>>> +
>>>> +config QCOM_SDM845_LLCC
>>>> +??? tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>>>> +??? depends on QCOM_LLCC
>>>> +??? help
>>>> +????? Say yes here to enable the LLCC driver for SDM845. This is
>>>> provides
>>>> +????? data required to configure LLCC so that clients can start
>>>> using the
>>>> +????? LLCC slices.
>>>> +
>>>> ?config QCOM_MDT_LOADER
>>>> ???? tristate
>>>> ???? select QCOM_SCM
>>>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>>>> index dcebf28..e16d6a2 100644
>>>> --- a/drivers/soc/qcom/Makefile
>>>> +++ b/drivers/soc/qcom/Makefile
>>>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>>> ?obj-$(CONFIG_QCOM_SMP2P)??? += smp2p.o
>>>> ?obj-$(CONFIG_QCOM_SMSM)??? += smsm.o
>>>> ?obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>>>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>>>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>>>> diff --git a/drivers/soc/qcom/llcc-sdm845.c
>>>> b/drivers/soc/qcom/llcc-sdm845.c
>>>> new file mode 100644
>>>> index 0000000..cd431d9
>>>> --- /dev/null
>>>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>>>> @@ -0,0 +1,120 @@
>>>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>>>> reserved.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or 
>>>> modify
>>>> + * it under the terms of the GNU General Public License version 2 
>>>> and
>>>> + * only version 2 as published by the Free Software Foundation.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful,
>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.? See the
>>>> + * GNU General Public License for more details.
>>>> + */
>>>> +
>>>> +#include <linux/err.h>
>>>> +#include <linux/kernel.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/of.h>
>>>> +#include <linux/of_device.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/soc/qcom/llcc-qcom.h>
>>>> +#include <linux/mfd/syscon.h>
>>>> +#include <linux/regmap.h>
>>>> +
>>>> +
>>>> +/*
>>>> + * SCT entry contains of the following parameters
>>>> + * name: Name of the client's use case for which the llcc slice is 
>>>> used
>>>> + * uid: Unique id for the client's use case
>>>> + * slice_id: llcc slice id for each client
>>>> + * max_cap: The maximum capacity of the cache slice provided in KB
>>>> + * priority: Priority of the client used to select victim line for
>>>> replacement
>>>> + * fixed_size: Determine of the slice has a fixed capacity
>>>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is 
>>>> used
>>>> only if
>>>> + *???????????? it't not a reserved way.
>>>> + * res_ways: Reserved ways for the cache slice, the reserved ways
>>>> cannot be used
>>>> + *?????????? by any other client than the one its assigned to.
>>>> + * cache_mode: Each slice operates as a cache, this controls the
>>>> mode of the
>>>> + *???????????? slice normal or TCM
>>>> + * probe_target_ways: Determines what ways to probe for access hit.
>>>> When
>>>> + *??????????????????? configured to 1 only bonus and reseved ways
>>>> are probed.
>>>> + *??????????????????? when configured to 0 all ways in llcc are 
>>>> probed.
>>>> + * dis_cap_alloc: Disable capacity based allocation for a client
>>>> + * retain_on_pc: If this bit is set and client has maitained active
>>>> vote
>>>> + *?????????????? then the ways assigned to this client are not
>>>> flushed on power
>>>> + *?????????????? collapse.
>>>> + * activate_on_init: Activate the slice immidiately after the SCT 
>>>> is
>>>> programmed
>>>> + */
>>>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw,
>>>> dca, rp, a) \
>>>> +??? {??????????????????? \
>>>> +??????? .name = n,??????????? \
>>>> +??????? .usecase_id = uid,??????? \
>>>> +??????? .slice_id = sid,??????? \
>>>> +??????? .max_cap = mc,??????????? \
>>>> +??????? .priority = p,??????????? \
>>>> +??????? .fixed_size = fs,??????? \
>>>> +??????? .bonus_ways = bway,??????? \
>>>> +??????? .res_ways = rway,??????? \
>>>> +??????? .cache_mode = cmod,??????? \
>>>> +??????? .probe_target_ways = ptw,??? \
>>>> +??????? .dis_cap_alloc = dca,??????? \
>>>> +??????? .retain_on_pc = rp,??????? \
>>>> +??????? .activate_on_init = a,??????? \
>>>> +??? }
>>>> +
>>>> +
>>>> +static struct llcc_slice_config sdm845_data[] =? {
>>>> +??? SCT_ENTRY("cpuss",?????? 1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 1),
>>>> +??? SCT_ENTRY("vidsc0",????? 2, 2, 512, 2, 1, 0x0,? 0x0F0, 0, 0, 1,
>>>> 1, 0),
>>>> +??? SCT_ENTRY("vidsc1",????? 3, 3, 512, 2, 1, 0x0,? 0x0F0, 0, 0, 1,
>>>> 1, 0),
>>>> +??? SCT_ENTRY("rotator",???? 4, 4, 563, 2, 1, 0x0,? 0x00e, 2, 0, 1,
>>>> 1, 0),
>>>> +??? SCT_ENTRY("voice",?????? 5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 0),
>>>> +??? SCT_ENTRY("audio",?????? 6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 0),
>>>> +??? SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("modem",?????? 8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1,
>>>> 1, 0),
>>>> +??? SCT_ENTRY("compute",???? 10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("gpuhtw",????? 11, 11, 512, 1, 1, 0xC,? 0x0, 0, 0, 1,
>>>> 1, 0),
>>>> +??? SCT_ENTRY("gpu",???????? 12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("mmuhwt",????? 13, 13, 256, 2, 0, 0x0,? 0x1, 0, 0, 1,
>>>> 0, 1),
>>>> +??? SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("display",???? 16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("videofw",???? 17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,? 0xF00, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0,
>>>> 1, 1, 0),
>>>> +??? SCT_ENTRY("audiohw",???? 22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0,
>>>> 1, 1, 0),
>>>> +};
>>>> +
>>>> +
>>>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>>>> +{
>>>> +??? return qcom_llcc_probe(pdev, sdm845_data, 
>>>> ARRAY_SIZE(sdm845_data));
>>> 
>>> I think having separate driver just for this config structure is
>>> pointless. Please move this in llcc driver and select the 
>>> configuration
>>> based on compatible string.
>> 
>> Thanks Stan for your review.
>> 
>> Wanted to highlight the reason we chose this approach. The System 
>> cache
>> table data
>> changes from chipset to chipset and overtime the table could have more
>> parameters.
>> Adding it as part of the core driver and selecting the table based on
>> compatible
>> would clutter the core driver. If we have 4 chipsets supporting system
>> cache then
>> core driver would have 4 tables as above and we select one of them 
>> based
>> on compatible
>> string. That is why we followed the pin control approach to have data 
>> in
>> per chipset
>> driver and pass it to common driver.
> 
> OK, do you plan to extend this with some more code?

Not this particular file, this is chipset specific file. We don't expect
more changes to this file.
A new driver is added for every chipset, so the data maintained here 
could
change in future. So the idea is to keep the chipset driver separate
from core driver.

-- 
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[rishabhb]

Hi Stanimir,
We incorporated all your comments except the following:
1. Removing the driver that maintains the SCT (system cache table)
per chipset. As responded earlier the data is expected to change
from chipset to chipset and would clutter the main driver if we
choose using compatible string. We think its good to keep the data
separate from core driver.
2. Changing struct llcc_slice_desc to llcc_desc:
The descriptor is specific to each slice and not the whole llcc.
All the properties such as id and size are specific to each slice
and not whole llcc.

please let me know if you are ok with the approach. Based on that
I can send my next revision of changes.



On 2018-03-29 01:08, Stanimir Varbanov wrote:
> Hi,
> 
> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>> LLCC (Last Level Cache Controller) provides additional cache memory
>> in the system. LLCC is partitioned into muliple slices and each
>> slice getting its own priority, size, ID and other config parameters.
>> LLCC driver programs these parameters for each slice. Clients that
>> are assigned to use LLCC need to get information such size & ID of the
>>  slice they get and activate or deactivate the slice as needed. LLCC 
>> driver
>> provides API interfaces for the clients to perform these operations.
>> 
>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>> ---
>>  drivers/soc/qcom/Kconfig           |  16 ++
>>  drivers/soc/qcom/Makefile          |   2 +
>>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>>  drivers/soc/qcom/llcc-slice.c      | 454 
>> +++++++++++++++++++++++++++++++++++++
> 
> I'd name it just llcc.c, slice suffix didn't add any value.
> 
>>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>  5 files changed, 770 insertions(+)
>>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>> 
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index e050eb8..28237fc 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>            functions for connecting the underlying serial UART, SPI, 
>> and I2C
>>            devices to the output pins.
>> 
>> +config QCOM_LLCC
>> +	tristate "Qualcomm Technologies, Inc. LLCC driver"
>> +	depends on ARCH_QCOM
>> +	help
>> +	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
>> +	  Level Cache. This provides interfaces to client's that use the 
>> LLCC.
>> +	  Say yes here to enable LLCC slice driver.
>> +
>> +config QCOM_SDM845_LLCC
>> +	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>> +	depends on QCOM_LLCC
>> +	help
>> +	  Say yes here to enable the LLCC driver for SDM845. This is 
>> provides
>> +	  data required to configure LLCC so that clients can start using 
>> the
>> +	  LLCC slices.
>> +
>>  config QCOM_MDT_LOADER
>>  	tristate
>>  	select QCOM_SCM
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index dcebf28..e16d6a2 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>  obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>> diff --git a/drivers/soc/qcom/llcc-sdm845.c 
>> b/drivers/soc/qcom/llcc-sdm845.c
>> new file mode 100644
>> index 0000000..cd431d9
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>> @@ -0,0 +1,120 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +
>> +
>> +/*
>> + * SCT entry contains of the following parameters
>> + * name: Name of the client's use case for which the llcc slice is 
>> used
>> + * uid: Unique id for the client's use case
>> + * slice_id: llcc slice id for each client
>> + * max_cap: The maximum capacity of the cache slice provided in KB
>> + * priority: Priority of the client used to select victim line for 
>> replacement
>> + * fixed_size: Determine of the slice has a fixed capacity
>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used 
>> only if
>> + *             it't not a reserved way.
>> + * res_ways: Reserved ways for the cache slice, the reserved ways 
>> cannot be used
>> + *           by any other client than the one its assigned to.
>> + * cache_mode: Each slice operates as a cache, this controls the mode 
>> of the
>> + *             slice normal or TCM
>> + * probe_target_ways: Determines what ways to probe for access hit. 
>> When
>> + *                    configured to 1 only bonus and reseved ways are 
>> probed.
>> + *                    when configured to 0 all ways in llcc are 
>> probed.
>> + * dis_cap_alloc: Disable capacity based allocation for a client
>> + * retain_on_pc: If this bit is set and client has maitained active 
>> vote
>> + *               then the ways assigned to this client are not 
>> flushed on power
>> + *               collapse.
>> + * activate_on_init: Activate the slice immidiately after the SCT is 
>> programmed
>> + */
>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, 
>> rp, a) \
>> +	{					\
>> +		.name = n,			\
>> +		.usecase_id = uid,		\
>> +		.slice_id = sid,		\
>> +		.max_cap = mc,			\
>> +		.priority = p,			\
>> +		.fixed_size = fs,		\
>> +		.bonus_ways = bway,		\
>> +		.res_ways = rway,		\
>> +		.cache_mode = cmod,		\
>> +		.probe_target_ways = ptw,	\
>> +		.dis_cap_alloc = dca,		\
>> +		.retain_on_pc = rp,		\
>> +		.activate_on_init = a,		\
>> +	}
>> +
>> +
>> +static struct llcc_slice_config sdm845_data[] =  {
>> +	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 1),
>> +	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 
>> 1),
>> +	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +};
>> +
>> +
>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>> +{
>> +	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
> 
> I think having separate driver just for this config structure is
> pointless. Please move this in llcc driver and select the configuration
> based on compatible string.
> 
> On first sight the driver has many coding style issues and flooding err
> messages which should be dropped. Did you run checkpatch?
> 
>> +}
>> +
>> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
>> +	{ .compatible = "qcom,sdm845-llcc", },
>> +	{ },
>> +};
>> +
>> +static struct platform_driver sdm845_qcom_llcc_driver = {
>> +	.driver = {
>> +		.name = "sdm845-llcc",
>> +		.owner = THIS_MODULE,
>> +		.of_match_table = sdm845_qcom_llcc_of_match,
>> +	},
>> +	.probe = sdm845_qcom_llcc_probe,
>> +	.remove = qcom_llcc_remove,
>> +};
>> +
>> +static int __init sdm845_init_qcom_llcc_init(void)
>> +{
>> +	return platform_driver_register(&sdm845_qcom_llcc_driver);
>> +}
>> +module_init(sdm845_init_qcom_llcc_init);
>> +
>> +static void __exit sdm845_exit_qcom_llcc_exit(void)
>> +{
>> +	platform_driver_unregister(&sdm845_qcom_llcc_driver);
>> +}
>> +module_exit(sdm845_exit_qcom_llcc_exit);
>> +
>> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/soc/qcom/llcc-slice.c 
>> b/drivers/soc/qcom/llcc-slice.c
>> new file mode 100644
>> index 0000000..6e86770
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-slice.c
>> @@ -0,0 +1,454 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#define pr_fmt(fmt)  "%s:" fmt, __func__
> 
> drop this and use dev_xxx instead.
> 
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/device.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mutex.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/bitops.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +
>> +#define ACTIVATE                      0x1
>> +#define DEACTIVATE                    0x2
>> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
>> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
>> +#define ACT_CTRL_ACT_TRIG             0x1
>> +#define ACT_CTRL_OPCODE_SHIFT         0x1
>> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
>> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
>> +#define ATTR1_PRIORITY_SHIFT          0x4
>> +#define ATTR1_MAX_CAP_SHIFT           0x10
>> +#define ATTR0_RES_WAYS_MASK           0x00000fff
>> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
>> +#define ATR0_BONUS_WAYS_SHIFT         0x10
>> +#define LLCC_STATUS_READ_DELAY 100
>> +
>> +#define CACHE_LINE_SIZE_SHIFT 6
>> +
>> +#define LLCC_COMMON_STATUS0		0x0003000C
>> +#define LLCC_LB_CNT_MASK		0xf0000000
>> +#define LLCC_LB_CNT_SHIFT		28
>> +
>> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
>> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
>> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
>> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
>> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
>> +
>> +
>> +
>> +static const struct regmap_config llcc_regmap_config = {
>> +		.reg_bits = 32,
>> +		.reg_stride = 4,
>> +		.val_bits = 32,
>> +		.fast_io = true,
>> +};
>> +
>> +
>> +/* Get the slice entry by index */
>> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device 
>> *dev, int n)
> 
> drop this *slice* word from function names
> 
>> +{
>> +	struct of_phandle_args phargs;
>> +	struct llcc_drv_data *drv;
>> +	const struct llcc_slice_config *llcc_data_ptr;
>> +	struct llcc_slice_desc *desc;
>> +	struct platform_device *pdev;
>> +	u32 sz, count;
>> +
>> +	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
>> +				       "#cache-cells", n, &phargs)) {
>> +		pr_err("can't parse \"cache-slices\" property\n");
> 
> drop all pr_err here and below.
> 
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	pdev = of_find_device_by_node(phargs.np);
>> +	if (!pdev) {
>> +		pr_err("Cannot find platform device from phandle\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	drv = platform_get_drvdata(pdev);
>> +	if (!drv) {
>> +		pr_err("cannot find platform driver data\n");
>> +		return ERR_PTR(-EFAULT);
>> +	}
>> +
>> +	llcc_data_ptr = drv->slice_data;
>> +	sz = drv->llcc_config_data_sz;
>> +	count = 0;
>> +
>> +	while (llcc_data_ptr && count < sz) {
>> +		if (llcc_data_ptr->usecase_id == phargs.args[0])
>> +			break;
>> +		llcc_data_ptr++;
>> +		count++;
>> +	}
>> +
>> +	if (llcc_data_ptr == NULL || count == sz) {
>> +		pr_err("can't find %d usecase id\n", phargs.args[0]);
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
>> +	if (!desc)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	desc->llcc_slice_id = llcc_data_ptr->slice_id;
>> +	desc->llcc_slice_size = llcc_data_ptr->max_cap;
>> +	desc->dev = &pdev->dev;
>> +
>> +	return desc;
>> +}
>> +
>> +/**
>> + * llcc_slice_getd - get llcc slice descriptor
>> + * @dev: Device pointer of the client
>> + * @name: Name of the use case
>> + *
>> + * A pointer to llcc slice descriptor will be returned on success and
>> + * and error pointer is returned on failure
>> + */
>> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const 
>> char *name)
>> +{
>> +	struct device_node *np = dev->of_node;
>> +	int index = 0;
>> +	const char *slice_name;
>> +	struct property *prop;
>> +
>> +	if (!np) {
>> +		dev_err(dev, "%s() currently only supports DT\n", __func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	if (!of_get_property(np, "cache-slice-names", NULL)) {
>> +		dev_err(dev,
>> +			"%s() requires a \"cache-slice-names\" property\n",
>> +			__func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	of_property_for_each_string(np, "cache-slice-names", prop, 
>> slice_name) {
>> +		if (!strcmp(name, slice_name))
>> +			break;
>> +		index++;
>> +	}
>> +
>> +	return llcc_slice_get_entry(dev, index);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_getd);
> 
> should be EXPORT_SYMBOL_GPL here and on all other places.
> 
>> +
>> +/**
>> + * llcc_slice_putd - llcc slice descritpor
>> + * @desc: Pointer to llcc slice descriptor
>> + */
>> +void llcc_slice_putd(struct llcc_slice_desc *desc)
>> +{
>> +	kfree(desc);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_putd);
>> +
>> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
>> +				u32 act_ctrl_reg_val, u32 status)
>> +{
>> +	u32 act_ctrl_reg;
>> +	u32 status_reg;
>> +	u32 slice_status;
>> +	unsigned long timeout;
>> +
>> +	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
>> +	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
>> +
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> 
> check for regmap_write error? Infact you don't check for regmap errors
> at all.
> 
>> +
>> +	/* Make sure the activate trigger is applied before clearing it */
>> +	mb();
>> +
>> +	/* Clear the ACTIVE trigger */
>> +	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
>> +
>> +	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
>> +	while (time_before(jiffies, timeout)) {
>> +		regmap_read(drv->llcc_map, status_reg, &slice_status);
>> +		if (!(slice_status & status))
>> +			return 0;
>> +	}
>> +
>> +	return -ETIMEDOUT;
>> +}
>> +
>> +/**
>> + * llcc_slice_activate - Activate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_activate(struct llcc_slice_desc *desc)
>> +{
>> +	int rc = -EINVAL;
> 
> please use 'ret' for variable name, here and on all other places.
> 
>> +	u32 act_ctrl_val;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
> 
> return -EINVAL;
> 
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +
>> +	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  DEACTIVATE);
>> +
>> +	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_activate);
>> +
>> +/**
>> + * llcc_slice_deactivate - Deactivate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> 
> just llcc_activate
> 
>> +{
>> +	u32 act_ctrl_val;
>> +	int rc = -EINVAL;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  ACTIVATE);
>> +
>> +	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_deactivate);
>> +
>> +/**
>> + * llcc_get_slice_id - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and a negative errno 
>> will
>> + * be returned on error
>> + */
>> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return -EINVAL;
>> +
>> +	return desc->llcc_slice_id;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_id);
>> +
>> +/**
>> + * llcc_get_slice_size - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and zero will 
>> returned on
>> + * error
>> + */
>> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return 0;
>> +
>> +	return desc->llcc_slice_size;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_size);
>> +
>> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
>> +{
>> +	int i;
>> +	u32 attr1_cfg;
>> +	u32 attr0_cfg;
>> +	u32 attr1_val;
>> +	u32 attr0_val;
>> +	u32 max_cap_cacheline;
>> +	u32 sz;
>> +	const struct llcc_slice_config *llcc_table;
>> +	struct llcc_slice_desc desc;
>> +	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
>> +	u32 b_off = drv->b_off;
>> +
>> +	sz = drv->llcc_config_data_sz;
>> +	llcc_table = drv->slice_data;
>> +
>> +	for (i = 0; i < sz; i++) {
>> +		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
>> +		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
>> +
>> +		attr1_val = llcc_table[i].cache_mode;
>> +		attr1_val |= (llcc_table[i].probe_target_ways <<
>> +				ATTR1_PROBE_TARGET_WAYS_SHIFT);
> 
> braces are not needed, here and below.
> 
>> +		attr1_val |= (llcc_table[i].fixed_size <<
>> +				ATTR1_FIXED_SIZE_SHIFT);
>> +		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
>> +
>> +		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
>> +
>> +		/* LLCC instances can vary for each target.
>> +		 * The SW writes to broadcast register which gets propagated
>> +		 * to each llcc instace (llcc0,.. llccN).
>> +		 * Since the size of the memory is divided equally amongst the
>> +		 * llcc instances, we need to configure the max cap accordingly.
>> +		 */
>> +		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
>> +		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
>> +		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
>> +
>> +		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
>> +		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
>> +
>> +		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
>> +		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
>> +
>> +		/* Make sure that the SCT is programmed before activating */
>> +		mb();
> 
> shouldn't this be wmb()?
> 
>> +
>> +		if (llcc_table[i].activate_on_init) {
>> +			desc.llcc_slice_id = llcc_table[i].slice_id;
>> +			desc.dev = &pdev->dev;
>> +			if (llcc_slice_activate(&desc)) {
>> +				pr_err("activate slice id: %d timed out\n",
>> +						desc.llcc_slice_id);
> 
> Make the fucntion to return int and propagate the error. And please 
> drop
> all pr_err.
> 
>> +			}
>> +		}
>> +	}
>> +}
>> +
>> +int qcom_llcc_probe(struct platform_device *pdev,
>> +		      const struct llcc_slice_config *llcc_cfg, u32 sz)
>> +{
>> +	int rc = 0;
>> +	u32 num_banks = 0;
>> +	struct device *dev = &pdev->dev;
>> +	static struct llcc_drv_data *drv_data;
> 
> static ??
> 
>> +	struct resource *res;
>> +	void __iomem *base;
>> +
>> +	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>> +	if (!drv_data)
>> +		return PTR_ERR(drv_data);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	base = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(base)) {
>> +		dev_err(&pdev->dev, "Cannot find the resource in device\n");
> 
> this error message is not needed.
> 
>> +		return PTR_ERR(base);
>> +	}
>> +
>> +	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, 
>> &llcc_regmap_config);
>> +	if (IS_ERR(drv_data->llcc_map)) {
>> +		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
> 
> again not needed.
> 
>> +		return PTR_ERR(drv_data->llcc_map);
>> +	}
>> +
>> +	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
>> +		    &num_banks);
>> +
>> +	num_banks &= LLCC_LB_CNT_MASK;
>> +	num_banks >>= LLCC_LB_CNT_SHIFT;
>> +	drv_data->num_banks = num_banks;
>> +
>> +	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
>> +				  &drv_data->max_slices);
>> +	if (rc) {
>> +		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
> 
> and this too.
> 
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return rc;
>> +	}
> 
> need blank line here.
> 
>> +	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), 
>> GFP_KERNEL);
>> +	if (!drv_data->offsets) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->offsets);
>> +	}
>> +
>> +	drv_data->offsets[0] = 0x0;
>> +	drv_data->offsets[1] = 0x80000;
>> +	drv_data->offsets[2] = 0x100000;
>> +	drv_data->offsets[3] = 0x180000;
>> +	drv_data->b_off = 0x200000;
> 
> shouln't this be SoC or llcc version specific?
> 
>> +
>> +	drv_data->llcc_slice_map = 
>> kcalloc(BITS_TO_LONGS(drv_data->max_slices),
>> +				   sizeof(unsigned long), GFP_KERNEL);
>> +
>> +	if (!drv_data->llcc_slice_map) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->llcc_slice_map);
>> +	}
>> +
>> +	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
>> +	drv_data->slice_data = llcc_cfg;
>> +	drv_data->llcc_config_data_sz = sz;
>> +	mutex_init(&drv_data->slice_mutex);
>> +	platform_set_drvdata(pdev, drv_data);
>> +
>> +	qcom_llcc_cfg_program(pdev);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_probe);
>> +
>> +int qcom_llcc_remove(struct platform_device *pdev)
>> +{
>> +	static struct llcc_drv_data *drv_data;
>> +
>> +	drv_data = platform_get_drvdata(pdev);
>> +
>> +	mutex_destroy(&drv_data->slice_mutex);
>> +	kfree(drv_data->llcc_slice_map);
>> +	devm_kfree(&pdev->dev, drv_data);
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_remove);
>> diff --git a/include/linux/soc/qcom/llcc-qcom.h 
>> b/include/linux/soc/qcom/llcc-qcom.h
>> new file mode 100644
>> index 0000000..c408a8d
>> --- /dev/null
>> +++ b/include/linux/soc/qcom/llcc-qcom.h
>> @@ -0,0 +1,178 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __LLCC_QCOM__
>> +#define __LLCC_QCOM__
>> +
>> +/**
>> + * llcc_slice_desc - Cache slice descriptor
>> + * @llcc_slice_id: llcc slice id
>> + * @llcc_slice_size: Size allocated for the llcc slice
>> + * @dev: pointer to llcc device
>> + */
>> +struct llcc_slice_desc {
> 
> 'llcc_desc' is enough.
> 
>> +	int llcc_slice_id;
> 
> 'slice_id' or even better 'id'.
> 
>> +	size_t llcc_slice_size;
> 
> 'slice_size' or just 'size'
> 
>> +	struct device *dev;
>> +};
>> +
>> +/**
>> + * llcc_slice_config - Data associated with the llcc slice
>> + * @name: name of the use case associated with the llcc slice
>> + * @usecase_id: usecase id for which the llcc slice is used
>> + * @slice_id: llcc slice id assigned to each slice
>> + * @max_cap: maximum capacity of the llcc slice
>> + * @priority: priority of the llcc slice
>> + * @fixed_size: whether the llcc slice can grow beyond its size
>> + * @bonus_ways: bonus ways associated with llcc slice
>> + * @res_ways: reserved ways associated with llcc slice
>> + * @cache_mode: mode of the llcce slice
>> + * @probe_target_ways: Probe only reserved and bonus ways on a cache 
>> miss
>> + * @dis_cap_alloc: Disable capacity based allocation
>> + * @retain_on_pc: Retain through power collapse
>> + * @activate_on_init: activate the slice on init
>> + */
>> +struct llcc_slice_config {
> 
> Once you move struct llcc_slice_config sdm845_data in llcc.c this
> structure must not be exported.
> 
>> +	const char *name;
>> +	int usecase_id;
> 
> unsigned int?
> 
>> +	int slice_id;
> 
> unsingned int?
> 
>> +	u32 max_cap;
>> +	u32 priority;
>> +	bool fixed_size;
>> +	u32 bonus_ways;
>> +	u32 res_ways;
>> +	u32 cache_mode;
>> +	u32 probe_target_ways;
>> +	bool dis_cap_alloc;
>> +	bool retain_on_pc;
>> +	u32 activate_on_init;
>> +};
>> +
>> +/**
>> + * llcc_drv_data - Data associated with the llcc driver
>> + * @llcc_map: regmap associated with the llcc device
>> + * @slice_data: pointer to the data structure associated with slice
> 
> should be better 'data structure for slice configuration'?
> 
>> + * @slice_mutex: mutex associated with each slice
>> + * @llcc_config_data_sz: size of the config data table
>> + * @max_slices: max slices as read from device tree
>> + * @b_off: Offset of the broadcast bank
>> + * @num_banks: Number of llcc banks
>> + * @llcc_slice_map: Bit map to track the active slice ids
>> + * @offsets: Pointer to the bank offsets array
>> + */
>> +
>> +struct llcc_drv_data {
>> +		struct regmap *llcc_map;
> 
> s/llcc_map/regmap
> 
>> +		const struct llcc_slice_config *slice_data;
> 
> s/slice_data/cfg
> 
>> +		struct mutex slice_mutex;
> 
> just 'lock'
> 
>> +		u32 llcc_config_data_sz;
> 
> cfg_size?
> 
>> +		u32 max_slices;
>> +		u32 b_off;
>> +		u32 num_banks;
>> +		unsigned long *llcc_slice_map;
> 
> only 'bitmap'?
> 
>> +		u32 *offsets;
>> +};
>> +
>> +
> 
> <cut>

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[rishabhb at codeaurora.org]

Hi Stanimir,
We incorporated all your comments except the following:
1. Removing the driver that maintains the SCT (system cache table)
per chipset. As responded earlier the data is expected to change
from chipset to chipset and would clutter the main driver if we
choose using compatible string. We think its good to keep the data
separate from core driver.
2. Changing struct llcc_slice_desc to llcc_desc:
The descriptor is specific to each slice and not the whole llcc.
All the properties such as id and size are specific to each slice
and not whole llcc.

please let me know if you are ok with the approach. Based on that
I can send my next revision of changes.



On 2018-03-29 01:08, Stanimir Varbanov wrote:
> Hi,
> 
> On 03/27/2018 09:52 PM, Rishabh Bhatnagar wrote:
>> LLCC (Last Level Cache Controller) provides additional cache memory
>> in the system. LLCC is partitioned into muliple slices and each
>> slice getting its own priority, size, ID and other config parameters.
>> LLCC driver programs these parameters for each slice. Clients that
>> are assigned to use LLCC need to get information such size & ID of the
>>  slice they get and activate or deactivate the slice as needed. LLCC 
>> driver
>> provides API interfaces for the clients to perform these operations.
>> 
>> Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org>
>> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
>> ---
>>  drivers/soc/qcom/Kconfig           |  16 ++
>>  drivers/soc/qcom/Makefile          |   2 +
>>  drivers/soc/qcom/llcc-sdm845.c     | 120 ++++++++++
>>  drivers/soc/qcom/llcc-slice.c      | 454 
>> +++++++++++++++++++++++++++++++++++++
> 
> I'd name it just llcc.c, slice suffix didn't add any value.
> 
>>  include/linux/soc/qcom/llcc-qcom.h | 178 +++++++++++++++
>>  5 files changed, 770 insertions(+)
>>  create mode 100644 drivers/soc/qcom/llcc-sdm845.c
>>  create mode 100644 drivers/soc/qcom/llcc-slice.c
>>  create mode 100644 include/linux/soc/qcom/llcc-qcom.h
>> 
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index e050eb8..28237fc 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -21,6 +21,22 @@ config QCOM_GSBI
>>            functions for connecting the underlying serial UART, SPI, 
>> and I2C
>>            devices to the output pins.
>> 
>> +config QCOM_LLCC
>> +	tristate "Qualcomm Technologies, Inc. LLCC driver"
>> +	depends on ARCH_QCOM
>> +	help
>> +	  Qualcomm Technologies, Inc. platform specific LLCC driver for Last
>> +	  Level Cache. This provides interfaces to client's that use the 
>> LLCC.
>> +	  Say yes here to enable LLCC slice driver.
>> +
>> +config QCOM_SDM845_LLCC
>> +	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
>> +	depends on QCOM_LLCC
>> +	help
>> +	  Say yes here to enable the LLCC driver for SDM845. This is 
>> provides
>> +	  data required to configure LLCC so that clients can start using 
>> the
>> +	  LLCC slices.
>> +
>>  config QCOM_MDT_LOADER
>>  	tristate
>>  	select QCOM_SCM
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index dcebf28..e16d6a2 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -12,3 +12,5 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
>>  obj-$(CONFIG_QCOM_SMP2P)	+= smp2p.o
>>  obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
>>  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
>> +obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
>> +obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
>> diff --git a/drivers/soc/qcom/llcc-sdm845.c 
>> b/drivers/soc/qcom/llcc-sdm845.c
>> new file mode 100644
>> index 0000000..cd431d9
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-sdm845.c
>> @@ -0,0 +1,120 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +
>> +
>> +/*
>> + * SCT entry contains of the following parameters
>> + * name: Name of the client's use case for which the llcc slice is 
>> used
>> + * uid: Unique id for the client's use case
>> + * slice_id: llcc slice id for each client
>> + * max_cap: The maximum capacity of the cache slice provided in KB
>> + * priority: Priority of the client used to select victim line for 
>> replacement
>> + * fixed_size: Determine of the slice has a fixed capacity
>> + * bonus_ways: Bonus ways to be used by any slice, bonus way is used 
>> only if
>> + *             it't not a reserved way.
>> + * res_ways: Reserved ways for the cache slice, the reserved ways 
>> cannot be used
>> + *           by any other client than the one its assigned to.
>> + * cache_mode: Each slice operates as a cache, this controls the mode 
>> of the
>> + *             slice normal or TCM
>> + * probe_target_ways: Determines what ways to probe for access hit. 
>> When
>> + *                    configured to 1 only bonus and reseved ways are 
>> probed.
>> + *                    when configured to 0 all ways in llcc are 
>> probed.
>> + * dis_cap_alloc: Disable capacity based allocation for a client
>> + * retain_on_pc: If this bit is set and client has maitained active 
>> vote
>> + *               then the ways assigned to this client are not 
>> flushed on power
>> + *               collapse.
>> + * activate_on_init: Activate the slice immidiately after the SCT is 
>> programmed
>> + */
>> +#define SCT_ENTRY(n, uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, 
>> rp, a) \
>> +	{					\
>> +		.name = n,			\
>> +		.usecase_id = uid,		\
>> +		.slice_id = sid,		\
>> +		.max_cap = mc,			\
>> +		.priority = p,			\
>> +		.fixed_size = fs,		\
>> +		.bonus_ways = bway,		\
>> +		.res_ways = rway,		\
>> +		.cache_mode = cmod,		\
>> +		.probe_target_ways = ptw,	\
>> +		.dis_cap_alloc = dca,		\
>> +		.retain_on_pc = rp,		\
>> +		.activate_on_init = a,		\
>> +	}
>> +
>> +
>> +static struct llcc_slice_config sdm845_data[] =  {
>> +	SCT_ENTRY("cpuss",       1, 1, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 1),
>> +	SCT_ENTRY("vidsc0",      2, 2, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("vidsc1",      3, 3, 512, 2, 1, 0x0,  0x0F0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("rotator",     4, 4, 563, 2, 1, 0x0,  0x00e, 2, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("voice",       5, 5, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audio",       6, 6, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_grow", 7, 7, 1024, 2, 0, 0x0FC, 0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem",       8, 8, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("compute",     10, 10, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpuhtw",      11, 11, 512, 1, 1, 0xC,  0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("gpu",         12, 12, 2304, 1, 0, 0xFF0, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("mmuhwt",      13, 13, 256, 2, 0, 0x0,  0x1, 0, 0, 1, 0, 
>> 1),
>> +	SCT_ENTRY("compute_dma", 15, 15, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("display",     16, 16, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("videofw",     17, 17, 2816, 1, 0, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("modemhp_fix", 20, 20, 1024, 2, 1, 0x0,  0xF00, 0, 0, 1, 
>> 1, 0),
>> +	SCT_ENTRY("modem_paging", 21, 21, 1024, 0, 1, 0x1e, 0x0, 0, 0, 1, 1, 
>> 0),
>> +	SCT_ENTRY("audiohw",     22, 22, 1024, 1, 1, 0xFFC, 0x2, 0, 0, 1, 1, 
>> 0),
>> +};
>> +
>> +
>> +static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
>> +{
>> +	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
> 
> I think having separate driver just for this config structure is
> pointless. Please move this in llcc driver and select the configuration
> based on compatible string.
> 
> On first sight the driver has many coding style issues and flooding err
> messages which should be dropped. Did you run checkpatch?
> 
>> +}
>> +
>> +static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
>> +	{ .compatible = "qcom,sdm845-llcc", },
>> +	{ },
>> +};
>> +
>> +static struct platform_driver sdm845_qcom_llcc_driver = {
>> +	.driver = {
>> +		.name = "sdm845-llcc",
>> +		.owner = THIS_MODULE,
>> +		.of_match_table = sdm845_qcom_llcc_of_match,
>> +	},
>> +	.probe = sdm845_qcom_llcc_probe,
>> +	.remove = qcom_llcc_remove,
>> +};
>> +
>> +static int __init sdm845_init_qcom_llcc_init(void)
>> +{
>> +	return platform_driver_register(&sdm845_qcom_llcc_driver);
>> +}
>> +module_init(sdm845_init_qcom_llcc_init);
>> +
>> +static void __exit sdm845_exit_qcom_llcc_exit(void)
>> +{
>> +	platform_driver_unregister(&sdm845_qcom_llcc_driver);
>> +}
>> +module_exit(sdm845_exit_qcom_llcc_exit);
>> +
>> +MODULE_DESCRIPTION("QTI sdm845 LLCC driver");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/soc/qcom/llcc-slice.c 
>> b/drivers/soc/qcom/llcc-slice.c
>> new file mode 100644
>> index 0000000..6e86770
>> --- /dev/null
>> +++ b/drivers/soc/qcom/llcc-slice.c
>> @@ -0,0 +1,454 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#define pr_fmt(fmt)  "%s:" fmt, __func__
> 
> drop this and use dev_xxx instead.
> 
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/device.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/mutex.h>
>> +#include <linux/bitmap.h>
>> +#include <linux/bitops.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>> +#include <linux/soc/qcom/llcc-qcom.h>
>> +
>> +#define ACTIVATE                      0x1
>> +#define DEACTIVATE                    0x2
>> +#define ACT_CTRL_OPCODE_ACTIVATE      0x1
>> +#define ACT_CTRL_OPCODE_DEACTIVATE    0x2
>> +#define ACT_CTRL_ACT_TRIG             0x1
>> +#define ACT_CTRL_OPCODE_SHIFT         0x1
>> +#define ATTR1_PROBE_TARGET_WAYS_SHIFT 0x2
>> +#define ATTR1_FIXED_SIZE_SHIFT        0x3
>> +#define ATTR1_PRIORITY_SHIFT          0x4
>> +#define ATTR1_MAX_CAP_SHIFT           0x10
>> +#define ATTR0_RES_WAYS_MASK           0x00000fff
>> +#define ATR0_BONUS_WAYS_MASK          0x0fff0000
>> +#define ATR0_BONUS_WAYS_SHIFT         0x10
>> +#define LLCC_STATUS_READ_DELAY 100
>> +
>> +#define CACHE_LINE_SIZE_SHIFT 6
>> +
>> +#define LLCC_COMMON_STATUS0		0x0003000C
>> +#define LLCC_LB_CNT_MASK		0xf0000000
>> +#define LLCC_LB_CNT_SHIFT		28
>> +
>> +#define MAX_CAP_TO_BYTES(n) (n * 1024)
>> +#define LLCC_TRP_ACT_CTRLn(n) (n * 0x1000)
>> +#define LLCC_TRP_STATUSn(n)   (4 + n * 0x1000)
>> +#define LLCC_TRP_ATTR0_CFGn(n) (0x21000 + 0x8 * n)
>> +#define LLCC_TRP_ATTR1_CFGn(n) (0x21004 + 0x8 * n)
>> +
>> +
>> +
>> +static const struct regmap_config llcc_regmap_config = {
>> +		.reg_bits = 32,
>> +		.reg_stride = 4,
>> +		.val_bits = 32,
>> +		.fast_io = true,
>> +};
>> +
>> +
>> +/* Get the slice entry by index */
>> +static struct llcc_slice_desc *llcc_slice_get_entry(struct device 
>> *dev, int n)
> 
> drop this *slice* word from function names
> 
>> +{
>> +	struct of_phandle_args phargs;
>> +	struct llcc_drv_data *drv;
>> +	const struct llcc_slice_config *llcc_data_ptr;
>> +	struct llcc_slice_desc *desc;
>> +	struct platform_device *pdev;
>> +	u32 sz, count;
>> +
>> +	if (of_parse_phandle_with_args(dev->of_node, "cache-slices",
>> +				       "#cache-cells", n, &phargs)) {
>> +		pr_err("can't parse \"cache-slices\" property\n");
> 
> drop all pr_err here and below.
> 
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	pdev = of_find_device_by_node(phargs.np);
>> +	if (!pdev) {
>> +		pr_err("Cannot find platform device from phandle\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	drv = platform_get_drvdata(pdev);
>> +	if (!drv) {
>> +		pr_err("cannot find platform driver data\n");
>> +		return ERR_PTR(-EFAULT);
>> +	}
>> +
>> +	llcc_data_ptr = drv->slice_data;
>> +	sz = drv->llcc_config_data_sz;
>> +	count = 0;
>> +
>> +	while (llcc_data_ptr && count < sz) {
>> +		if (llcc_data_ptr->usecase_id == phargs.args[0])
>> +			break;
>> +		llcc_data_ptr++;
>> +		count++;
>> +	}
>> +
>> +	if (llcc_data_ptr == NULL || count == sz) {
>> +		pr_err("can't find %d usecase id\n", phargs.args[0]);
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	desc = kzalloc(sizeof(struct llcc_slice_desc), GFP_KERNEL);
>> +	if (!desc)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	desc->llcc_slice_id = llcc_data_ptr->slice_id;
>> +	desc->llcc_slice_size = llcc_data_ptr->max_cap;
>> +	desc->dev = &pdev->dev;
>> +
>> +	return desc;
>> +}
>> +
>> +/**
>> + * llcc_slice_getd - get llcc slice descriptor
>> + * @dev: Device pointer of the client
>> + * @name: Name of the use case
>> + *
>> + * A pointer to llcc slice descriptor will be returned on success and
>> + * and error pointer is returned on failure
>> + */
>> +struct llcc_slice_desc *llcc_slice_getd(struct device *dev, const 
>> char *name)
>> +{
>> +	struct device_node *np = dev->of_node;
>> +	int index = 0;
>> +	const char *slice_name;
>> +	struct property *prop;
>> +
>> +	if (!np) {
>> +		dev_err(dev, "%s() currently only supports DT\n", __func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	if (!of_get_property(np, "cache-slice-names", NULL)) {
>> +		dev_err(dev,
>> +			"%s() requires a \"cache-slice-names\" property\n",
>> +			__func__);
>> +		return ERR_PTR(-ENOENT);
>> +	}
>> +
>> +	of_property_for_each_string(np, "cache-slice-names", prop, 
>> slice_name) {
>> +		if (!strcmp(name, slice_name))
>> +			break;
>> +		index++;
>> +	}
>> +
>> +	return llcc_slice_get_entry(dev, index);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_getd);
> 
> should be EXPORT_SYMBOL_GPL here and on all other places.
> 
>> +
>> +/**
>> + * llcc_slice_putd - llcc slice descritpor
>> + * @desc: Pointer to llcc slice descriptor
>> + */
>> +void llcc_slice_putd(struct llcc_slice_desc *desc)
>> +{
>> +	kfree(desc);
>> +}
>> +EXPORT_SYMBOL(llcc_slice_putd);
>> +
>> +static int llcc_update_act_ctrl(struct llcc_drv_data *drv, u32 sid,
>> +				u32 act_ctrl_reg_val, u32 status)
>> +{
>> +	u32 act_ctrl_reg;
>> +	u32 status_reg;
>> +	u32 slice_status;
>> +	unsigned long timeout;
>> +
>> +	act_ctrl_reg = drv->b_off + LLCC_TRP_ACT_CTRLn(sid);
>> +	status_reg = drv->b_off + LLCC_TRP_STATUSn(sid);
>> +
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
> 
> check for regmap_write error? Infact you don't check for regmap errors
> at all.
> 
>> +
>> +	/* Make sure the activate trigger is applied before clearing it */
>> +	mb();
>> +
>> +	/* Clear the ACTIVE trigger */
>> +	act_ctrl_reg_val &= ~ACT_CTRL_ACT_TRIG;
>> +	regmap_write(drv->llcc_map, act_ctrl_reg, act_ctrl_reg_val);
>> +
>> +	timeout = jiffies + usecs_to_jiffies(LLCC_STATUS_READ_DELAY);
>> +	while (time_before(jiffies, timeout)) {
>> +		regmap_read(drv->llcc_map, status_reg, &slice_status);
>> +		if (!(slice_status & status))
>> +			return 0;
>> +	}
>> +
>> +	return -ETIMEDOUT;
>> +}
>> +
>> +/**
>> + * llcc_slice_activate - Activate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_activate(struct llcc_slice_desc *desc)
>> +{
>> +	int rc = -EINVAL;
> 
> please use 'ret' for variable name, here and on all other places.
> 
>> +	u32 act_ctrl_val;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
> 
> return -EINVAL;
> 
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +
>> +	act_ctrl_val = ACT_CTRL_OPCODE_ACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  DEACTIVATE);
>> +
>> +	__set_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_activate);
>> +
>> +/**
>> + * llcc_slice_deactivate - Deactivate the llcc slice
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A value zero will be returned on success and a negative errno will
>> + * be returned in error cases
>> + */
>> +int llcc_slice_deactivate(struct llcc_slice_desc *desc)
> 
> just llcc_activate
> 
>> +{
>> +	u32 act_ctrl_val;
>> +	int rc = -EINVAL;
>> +	struct llcc_drv_data *drv;
>> +
>> +	if (desc == NULL)
>> +		return rc;
>> +
>> +	drv = dev_get_drvdata(desc->dev);
>> +	if (!drv)
>> +		return rc;
>> +
>> +	mutex_lock(&drv->slice_mutex);
>> +	if (!test_bit(desc->llcc_slice_id, drv->llcc_slice_map)) {
>> +		mutex_unlock(&drv->slice_mutex);
>> +		return 0;
>> +	}
>> +	act_ctrl_val = ACT_CTRL_OPCODE_DEACTIVATE << ACT_CTRL_OPCODE_SHIFT;
>> +	act_ctrl_val |= ACT_CTRL_ACT_TRIG;
>> +
>> +	rc = llcc_update_act_ctrl(drv, desc->llcc_slice_id, act_ctrl_val,
>> +				  ACTIVATE);
>> +
>> +	__clear_bit(desc->llcc_slice_id, drv->llcc_slice_map);
>> +	mutex_unlock(&drv->slice_mutex);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(llcc_slice_deactivate);
>> +
>> +/**
>> + * llcc_get_slice_id - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and a negative errno 
>> will
>> + * be returned on error
>> + */
>> +int llcc_get_slice_id(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return -EINVAL;
>> +
>> +	return desc->llcc_slice_id;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_id);
>> +
>> +/**
>> + * llcc_get_slice_size - return the slice id
>> + * @desc: Pointer to llcc slice descriptor
>> + *
>> + * A positive value will be returned on success and zero will 
>> returned on
>> + * error
>> + */
>> +size_t llcc_get_slice_size(struct llcc_slice_desc *desc)
>> +{
>> +	if (!desc)
>> +		return 0;
>> +
>> +	return desc->llcc_slice_size;
>> +}
>> +EXPORT_SYMBOL(llcc_get_slice_size);
>> +
>> +static void qcom_llcc_cfg_program(struct platform_device *pdev)
>> +{
>> +	int i;
>> +	u32 attr1_cfg;
>> +	u32 attr0_cfg;
>> +	u32 attr1_val;
>> +	u32 attr0_val;
>> +	u32 max_cap_cacheline;
>> +	u32 sz;
>> +	const struct llcc_slice_config *llcc_table;
>> +	struct llcc_slice_desc desc;
>> +	struct llcc_drv_data *drv = platform_get_drvdata(pdev);
>> +	u32 b_off = drv->b_off;
>> +
>> +	sz = drv->llcc_config_data_sz;
>> +	llcc_table = drv->slice_data;
>> +
>> +	for (i = 0; i < sz; i++) {
>> +		attr1_cfg = b_off + LLCC_TRP_ATTR1_CFGn(llcc_table[i].slice_id);
>> +		attr0_cfg = b_off + LLCC_TRP_ATTR0_CFGn(llcc_table[i].slice_id);
>> +
>> +		attr1_val = llcc_table[i].cache_mode;
>> +		attr1_val |= (llcc_table[i].probe_target_ways <<
>> +				ATTR1_PROBE_TARGET_WAYS_SHIFT);
> 
> braces are not needed, here and below.
> 
>> +		attr1_val |= (llcc_table[i].fixed_size <<
>> +				ATTR1_FIXED_SIZE_SHIFT);
>> +		attr1_val |= (llcc_table[i].priority << ATTR1_PRIORITY_SHIFT);
>> +
>> +		max_cap_cacheline = MAX_CAP_TO_BYTES(llcc_table[i].max_cap);
>> +
>> +		/* LLCC instances can vary for each target.
>> +		 * The SW writes to broadcast register which gets propagated
>> +		 * to each llcc instace (llcc0,.. llccN).
>> +		 * Since the size of the memory is divided equally amongst the
>> +		 * llcc instances, we need to configure the max cap accordingly.
>> +		 */
>> +		max_cap_cacheline = (max_cap_cacheline / drv->num_banks);
>> +		max_cap_cacheline >>= CACHE_LINE_SIZE_SHIFT;
>> +		attr1_val |= (max_cap_cacheline << ATTR1_MAX_CAP_SHIFT);
>> +
>> +		attr0_val = llcc_table[i].res_ways & ATTR0_RES_WAYS_MASK;
>> +		attr0_val |= llcc_table[i].bonus_ways << ATR0_BONUS_WAYS_SHIFT;
>> +
>> +		regmap_write(drv->llcc_map, attr1_cfg, attr1_val);
>> +		regmap_write(drv->llcc_map, attr0_cfg, attr0_val);
>> +
>> +		/* Make sure that the SCT is programmed before activating */
>> +		mb();
> 
> shouldn't this be wmb()?
> 
>> +
>> +		if (llcc_table[i].activate_on_init) {
>> +			desc.llcc_slice_id = llcc_table[i].slice_id;
>> +			desc.dev = &pdev->dev;
>> +			if (llcc_slice_activate(&desc)) {
>> +				pr_err("activate slice id: %d timed out\n",
>> +						desc.llcc_slice_id);
> 
> Make the fucntion to return int and propagate the error. And please 
> drop
> all pr_err.
> 
>> +			}
>> +		}
>> +	}
>> +}
>> +
>> +int qcom_llcc_probe(struct platform_device *pdev,
>> +		      const struct llcc_slice_config *llcc_cfg, u32 sz)
>> +{
>> +	int rc = 0;
>> +	u32 num_banks = 0;
>> +	struct device *dev = &pdev->dev;
>> +	static struct llcc_drv_data *drv_data;
> 
> static ??
> 
>> +	struct resource *res;
>> +	void __iomem *base;
>> +
>> +	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>> +	if (!drv_data)
>> +		return PTR_ERR(drv_data);
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	base = devm_ioremap_resource(&pdev->dev, res);
>> +	if (IS_ERR(base)) {
>> +		dev_err(&pdev->dev, "Cannot find the resource in device\n");
> 
> this error message is not needed.
> 
>> +		return PTR_ERR(base);
>> +	}
>> +
>> +	drv_data->llcc_map = devm_regmap_init_mmio(dev, base, 
>> &llcc_regmap_config);
>> +	if (IS_ERR(drv_data->llcc_map)) {
>> +		dev_err(&pdev->dev, "Cannot init the regmap for llcc\n");
> 
> again not needed.
> 
>> +		return PTR_ERR(drv_data->llcc_map);
>> +	}
>> +
>> +	regmap_read(drv_data->llcc_map, LLCC_COMMON_STATUS0,
>> +		    &num_banks);
>> +
>> +	num_banks &= LLCC_LB_CNT_MASK;
>> +	num_banks >>= LLCC_LB_CNT_SHIFT;
>> +	drv_data->num_banks = num_banks;
>> +
>> +	rc = of_property_read_u32(pdev->dev.of_node, "max-slices",
>> +				  &drv_data->max_slices);
>> +	if (rc) {
>> +		dev_err(&pdev->dev, "Invalid max-slices dt entry\n");
> 
> and this too.
> 
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return rc;
>> +	}
> 
> need blank line here.
> 
>> +	drv_data->offsets = devm_kzalloc(dev, num_banks*sizeof(u32), 
>> GFP_KERNEL);
>> +	if (!drv_data->offsets) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->offsets);
>> +	}
>> +
>> +	drv_data->offsets[0] = 0x0;
>> +	drv_data->offsets[1] = 0x80000;
>> +	drv_data->offsets[2] = 0x100000;
>> +	drv_data->offsets[3] = 0x180000;
>> +	drv_data->b_off = 0x200000;
> 
> shouln't this be SoC or llcc version specific?
> 
>> +
>> +	drv_data->llcc_slice_map = 
>> kcalloc(BITS_TO_LONGS(drv_data->max_slices),
>> +				   sizeof(unsigned long), GFP_KERNEL);
>> +
>> +	if (!drv_data->llcc_slice_map) {
>> +		devm_kfree(&pdev->dev, drv_data);
>> +		return PTR_ERR(drv_data->llcc_slice_map);
>> +	}
>> +
>> +	bitmap_zero(drv_data->llcc_slice_map, drv_data->max_slices);
>> +	drv_data->slice_data = llcc_cfg;
>> +	drv_data->llcc_config_data_sz = sz;
>> +	mutex_init(&drv_data->slice_mutex);
>> +	platform_set_drvdata(pdev, drv_data);
>> +
>> +	qcom_llcc_cfg_program(pdev);
>> +
>> +	return rc;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_probe);
>> +
>> +int qcom_llcc_remove(struct platform_device *pdev)
>> +{
>> +	static struct llcc_drv_data *drv_data;
>> +
>> +	drv_data = platform_get_drvdata(pdev);
>> +
>> +	mutex_destroy(&drv_data->slice_mutex);
>> +	kfree(drv_data->llcc_slice_map);
>> +	devm_kfree(&pdev->dev, drv_data);
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL(qcom_llcc_remove);
>> diff --git a/include/linux/soc/qcom/llcc-qcom.h 
>> b/include/linux/soc/qcom/llcc-qcom.h
>> new file mode 100644
>> index 0000000..c408a8d
>> --- /dev/null
>> +++ b/include/linux/soc/qcom/llcc-qcom.h
>> @@ -0,0 +1,178 @@
>> +/* Copyright (c) 2017-2018, The Linux Foundation. All rights 
>> reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or 
>> modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef __LLCC_QCOM__
>> +#define __LLCC_QCOM__
>> +
>> +/**
>> + * llcc_slice_desc - Cache slice descriptor
>> + * @llcc_slice_id: llcc slice id
>> + * @llcc_slice_size: Size allocated for the llcc slice
>> + * @dev: pointer to llcc device
>> + */
>> +struct llcc_slice_desc {
> 
> 'llcc_desc' is enough.
> 
>> +	int llcc_slice_id;
> 
> 'slice_id' or even better 'id'.
> 
>> +	size_t llcc_slice_size;
> 
> 'slice_size' or just 'size'
> 
>> +	struct device *dev;
>> +};
>> +
>> +/**
>> + * llcc_slice_config - Data associated with the llcc slice
>> + * @name: name of the use case associated with the llcc slice
>> + * @usecase_id: usecase id for which the llcc slice is used
>> + * @slice_id: llcc slice id assigned to each slice
>> + * @max_cap: maximum capacity of the llcc slice
>> + * @priority: priority of the llcc slice
>> + * @fixed_size: whether the llcc slice can grow beyond its size
>> + * @bonus_ways: bonus ways associated with llcc slice
>> + * @res_ways: reserved ways associated with llcc slice
>> + * @cache_mode: mode of the llcce slice
>> + * @probe_target_ways: Probe only reserved and bonus ways on a cache 
>> miss
>> + * @dis_cap_alloc: Disable capacity based allocation
>> + * @retain_on_pc: Retain through power collapse
>> + * @activate_on_init: activate the slice on init
>> + */
>> +struct llcc_slice_config {
> 
> Once you move struct llcc_slice_config sdm845_data in llcc.c this
> structure must not be exported.
> 
>> +	const char *name;
>> +	int usecase_id;
> 
> unsigned int?
> 
>> +	int slice_id;
> 
> unsingned int?
> 
>> +	u32 max_cap;
>> +	u32 priority;
>> +	bool fixed_size;
>> +	u32 bonus_ways;
>> +	u32 res_ways;
>> +	u32 cache_mode;
>> +	u32 probe_target_ways;
>> +	bool dis_cap_alloc;
>> +	bool retain_on_pc;
>> +	u32 activate_on_init;
>> +};
>> +
>> +/**
>> + * llcc_drv_data - Data associated with the llcc driver
>> + * @llcc_map: regmap associated with the llcc device
>> + * @slice_data: pointer to the data structure associated with slice
> 
> should be better 'data structure for slice configuration'?
> 
>> + * @slice_mutex: mutex associated with each slice
>> + * @llcc_config_data_sz: size of the config data table
>> + * @max_slices: max slices as read from device tree
>> + * @b_off: Offset of the broadcast bank
>> + * @num_banks: Number of llcc banks
>> + * @llcc_slice_map: Bit map to track the active slice ids
>> + * @offsets: Pointer to the bank offsets array
>> + */
>> +
>> +struct llcc_drv_data {
>> +		struct regmap *llcc_map;
> 
> s/llcc_map/regmap
> 
>> +		const struct llcc_slice_config *slice_data;
> 
> s/slice_data/cfg
> 
>> +		struct mutex slice_mutex;
> 
> just 'lock'
> 
>> +		u32 llcc_config_data_sz;
> 
> cfg_size?
> 
>> +		u32 max_slices;
>> +		u32 b_off;
>> +		u32 num_banks;
>> +		unsigned long *llcc_slice_map;
> 
> only 'bitmap'?
> 
>> +		u32 *offsets;
>> +};
>> +
>> +
> 
> <cut>

Re: [PATCH v3 2/2] drivers: soc: Add LLCC driver

[Stanimir Varbanov]

Hi,

On  4.04.2018 20:30, rishabhb@codeaurora.org wrote:
> Hi Stanimir,
> We incorporated all your comments except the following:
> 1. Removing the driver that maintains the SCT (system cache table)
> per chipset. As responded earlier the data is expected to change
> from chipset to chipset and would clutter the main driver if we
> choose using compatible string. We think its good to keep the data
> separate from core driver.
> 2. Changing struct llcc_slice_desc to llcc_desc:
> The descriptor is specific to each slice and not the whole llcc.
> All the properties such as id and size are specific to each slice
> and not whole llcc.
> 
> please let me know if you are ok with the approach. Based on that
> I can send my next revision of changes.

Yes, please go ahead and send the next version.

regards,
Stan

[PATCH v3 2/2] drivers: soc: Add LLCC driver

[Stanimir Varbanov]

Hi,

On  4.04.2018 20:30, rishabhb at codeaurora.org wrote:
> Hi Stanimir,
> We incorporated all your comments except the following:
> 1. Removing the driver that maintains the SCT (system cache table)
> per chipset. As responded earlier the data is expected to change
> from chipset to chipset and would clutter the main driver if we
> choose using compatible string. We think its good to keep the data
> separate from core driver.
> 2. Changing struct llcc_slice_desc to llcc_desc:
> The descriptor is specific to each slice and not the whole llcc.
> All the properties such as id and size are specific to each slice
> and not whole llcc.
> 
> please let me know if you are ok with the approach. Based on that
> I can send my next revision of changes.

Yes, please go ahead and send the next version.

regards,
Stan