[PATCH 0/3] sound/usb/line6: fix some styling issues

[PATCH 0/3] sound/usb/line6: fix some styling issues

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org


This patchseries addresses some styling issues in sound/usb/line6 found by
checkpatch.

Roman Sommer (3):
  sound/line6: checkpatch: fix block comment style
  sound/line6: unsigned -> unsigned int
  sound/line6: add newline after declarations

 sound/usb/line6/capture.c  |  20 ++++-----
 sound/usb/line6/driver.c   | 110 ++++++++++++++++++++++-----------------------
 sound/usb/line6/driver.h   |  33 +++++++-------
 sound/usb/line6/midi.c     |  24 +++++-----
 sound/usb/line6/midibuf.c  |   6 +--
 sound/usb/line6/pcm.c      |  26 +++++------
 sound/usb/line6/pcm.h      |  74 +++++++++++++++---------------
 sound/usb/line6/playback.c |  36 ++++++++-------
 sound/usb/line6/pod.c      |  60 ++++++++++++-------------
 sound/usb/line6/podhd.c    |   8 ++--
 sound/usb/line6/toneport.c |  30 ++++++-------
 sound/usb/line6/variax.c   |  40 ++++++++---------
 12 files changed, 235 insertions(+), 232 deletions(-)

-- 
2.7.4

[PATCH 0/3] sound/usb/line6: fix some styling issues

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org


This patchseries addresses some styling issues in sound/usb/line6 found by
checkpatch.

Roman Sommer (3):
  sound/line6: checkpatch: fix block comment style
  sound/line6: unsigned -> unsigned int
  sound/line6: add newline after declarations

 sound/usb/line6/capture.c  |  20 ++++-----
 sound/usb/line6/driver.c   | 110 ++++++++++++++++++++++-----------------------
 sound/usb/line6/driver.h   |  33 +++++++-------
 sound/usb/line6/midi.c     |  24 +++++-----
 sound/usb/line6/midibuf.c  |   6 +--
 sound/usb/line6/pcm.c      |  26 +++++------
 sound/usb/line6/pcm.h      |  74 +++++++++++++++---------------
 sound/usb/line6/playback.c |  36 ++++++++-------
 sound/usb/line6/pod.c      |  60 ++++++++++++-------------
 sound/usb/line6/podhd.c    |   8 ++--
 sound/usb/line6/toneport.c |  30 ++++++-------
 sound/usb/line6/variax.c   |  40 ++++++++---------
 12 files changed, 235 insertions(+), 232 deletions(-)

-- 
2.7.4

[PATCH 1/3] sound/line6: checkpatch: fix block comment style

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org

This patch fixed the style of multiline comments in sound/usb/line6.

Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Signed-off-by: Daniel Graefe <daniel.graefe@fau.de>
---
 sound/usb/line6/capture.c  |  20 ++++-----
 sound/usb/line6/driver.c   | 100 ++++++++++++++++++++++-----------------------
 sound/usb/line6/driver.h   |  24 +++++------
 sound/usb/line6/midi.c     |  24 +++++------
 sound/usb/line6/midibuf.c  |   6 +--
 sound/usb/line6/pcm.c      |  22 +++++-----
 sound/usb/line6/pcm.h      |  68 +++++++++++++++---------------
 sound/usb/line6/playback.c |  34 +++++++--------
 sound/usb/line6/pod.c      |  60 +++++++++++++--------------
 sound/usb/line6/podhd.c    |   8 ++--
 sound/usb/line6/toneport.c |  30 +++++++-------
 sound/usb/line6/variax.c   |  40 +++++++++---------
 12 files changed, 218 insertions(+), 218 deletions(-)

diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c
index 947d616..321605c 100644
--- a/sound/usb/line6/capture.c
+++ b/sound/usb/line6/capture.c
@@ -19,9 +19,9 @@
 #include "pcm.h"
 
 /*
-	Find a free URB and submit it.
-	must be called in line6pcm->in.lock context
-*/
+ * Find a free URB and submit it.
+ * must be called in line6pcm->in.lock context
+ */
 static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
 {
 	int index;
@@ -66,9 +66,9 @@ static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Submit all currently available capture URBs.
-	must be called in line6pcm->in.lock context
-*/
+ * Submit all currently available capture URBs.
+ * must be called in line6pcm->in.lock context
+ */
 int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm)
 {
 	int ret = 0, i;
@@ -83,8 +83,8 @@ int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Copy data into ALSA capture buffer.
-*/
+ * Copy data into ALSA capture buffer.
+ */
 void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf, int fsize)
 {
 	struct snd_pcm_substream *substream =
@@ -100,8 +100,8 @@ void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf, int fsize)
 
 	if (line6pcm->in.pos_done + frames > runtime->buffer_size) {
 		/*
-		   The transferred area goes over buffer boundary,
-		   copy two separate chunks.
+		 * The transferred area goes over buffer boundary,
+		 * copy two separate chunks.
 		 */
 		int len;
 
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index c1376bf..df7e761 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -28,24 +28,24 @@
 #define DRIVER_DESC    "Line 6 USB Driver"
 
 /*
-	This is Line 6's MIDI manufacturer ID.
-*/
+ * This is Line 6's MIDI manufacturer ID.
+ */
 const unsigned char line6_midi_id[3] = {
 	0x00, 0x01, 0x0c
 };
 EXPORT_SYMBOL_GPL(line6_midi_id);
 
 /*
-	Code to request version of POD, Variax interface
-	(and maybe other devices).
-*/
+ * Code to request version of POD, Variax interface
+ * (and maybe other devices).
+ */
 static const char line6_request_version[] = {
 	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
 };
 
 /*
-	 Class for asynchronous messages.
-*/
+ * Class for asynchronous messages.
+ */
 struct message {
 	struct usb_line6 *line6;
 	const char *buffer;
@@ -54,15 +54,15 @@ struct message {
 };
 
 /*
-	Forward declarations.
-*/
+ * Forward declarations.
+ */
 static void line6_data_received(struct urb *urb);
 static int line6_send_raw_message_async_part(struct message *msg,
 					     struct urb *urb);
 
 /*
-	Start to listen on endpoint.
-*/
+ * Start to listen on endpoint.
+ */
 static int line6_start_listen(struct usb_line6 *line6)
 {
 	int err;
@@ -91,16 +91,16 @@ static int line6_start_listen(struct usb_line6 *line6)
 }
 
 /*
-	Stop listening on endpoint.
-*/
+ * Stop listening on endpoint.
+ */
 static void line6_stop_listen(struct usb_line6 *line6)
 {
 	usb_kill_urb(line6->urb_listen);
 }
 
 /*
-	Send raw message in pieces of wMaxPacketSize bytes.
-*/
+ * Send raw message in pieces of wMaxPacketSize bytes.
+ */
 static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 				  int size)
 {
@@ -138,8 +138,8 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 }
 
 /*
-	Notification of completion of asynchronous request transmission.
-*/
+ * Notification of completion of asynchronous request transmission.
+ */
 static void line6_async_request_sent(struct urb *urb)
 {
 	struct message *msg = (struct message *)urb->context;
@@ -152,8 +152,8 @@ static void line6_async_request_sent(struct urb *urb)
 }
 
 /*
-	Asynchronously send part of a raw message.
-*/
+ * Asynchronously send part of a raw message.
+ */
 static int line6_send_raw_message_async_part(struct message *msg,
 					     struct urb *urb)
 {
@@ -196,8 +196,8 @@ static int line6_send_raw_message_async_part(struct message *msg,
 }
 
 /*
-	Setup and start timer.
-*/
+ * Setup and start timer.
+ */
 void line6_start_timer(struct timer_list *timer, unsigned long msecs,
 		       void (*function)(struct timer_list *t))
 {
@@ -207,8 +207,8 @@ void line6_start_timer(struct timer_list *timer, unsigned long msecs,
 EXPORT_SYMBOL_GPL(line6_start_timer);
 
 /*
-	Asynchronously send raw message.
-*/
+ * Asynchronously send raw message.
+ */
 int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 				 int size)
 {
@@ -240,8 +240,8 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 EXPORT_SYMBOL_GPL(line6_send_raw_message_async);
 
 /*
-	Send asynchronous device version request.
-*/
+ * Send asynchronous device version request.
+ */
 int line6_version_request_async(struct usb_line6 *line6)
 {
 	char *buffer;
@@ -260,8 +260,8 @@ int line6_version_request_async(struct usb_line6 *line6)
 EXPORT_SYMBOL_GPL(line6_version_request_async);
 
 /*
-	Send sysex message in pieces of wMaxPacketSize bytes.
-*/
+ * Send sysex message in pieces of wMaxPacketSize bytes.
+ */
 int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
 			     int size)
 {
@@ -272,10 +272,10 @@ int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
 EXPORT_SYMBOL_GPL(line6_send_sysex_message);
 
 /*
-	Allocate buffer for sysex message and prepare header.
-	@param code sysex message code
-	@param size number of bytes between code and sysex end
-*/
+ * Allocate buffer for sysex message and prepare header.
+ * @param code sysex message code
+ * @param size number of bytes between code and sysex end
+ */
 char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
 			       int size)
 {
@@ -294,8 +294,8 @@ char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
 EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer);
 
 /*
-	Notification of data received from the Line 6 device.
-*/
+ * Notification of data received from the Line 6 device.
+ */
 static void line6_data_received(struct urb *urb)
 {
 	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
@@ -344,8 +344,8 @@ static void line6_data_received(struct urb *urb)
 #define LINE6_READ_WRITE_MAX_RETRIES 50
 
 /*
-	Read data from device.
-*/
+ * Read data from device.
+ */
 int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
 		    unsigned datalen)
 {
@@ -415,8 +415,8 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
 EXPORT_SYMBOL_GPL(line6_read_data);
 
 /*
-	Write data to device.
-*/
+ * Write data to device.
+ */
 int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
 		     unsigned datalen)
 {
@@ -473,9 +473,9 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
 EXPORT_SYMBOL_GPL(line6_write_data);
 
 /*
-	Read Line 6 device serial number.
-	(POD, TonePort, GuitarPort)
-*/
+ * Read Line 6 device serial number.
+ * (POD, TonePort, GuitarPort)
+ */
 int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
 {
 	return line6_read_data(line6, 0x80d0, serial_number,
@@ -484,8 +484,8 @@ int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
 EXPORT_SYMBOL_GPL(line6_read_serial_number);
 
 /*
-	Card destructor.
-*/
+ * Card destructor.
+ */
 static void line6_destruct(struct snd_card *card)
 {
 	struct usb_line6 *line6 = card->private_data;
@@ -711,8 +711,8 @@ static int line6_init_cap_control(struct usb_line6 *line6)
 }
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 int line6_probe(struct usb_interface *interface,
 		const struct usb_device_id *id,
 		const char *driver_name,
@@ -802,8 +802,8 @@ int line6_probe(struct usb_interface *interface,
 EXPORT_SYMBOL_GPL(line6_probe);
 
 /*
-	Line 6 device disconnected.
-*/
+ * Line 6 device disconnected.
+ */
 void line6_disconnect(struct usb_interface *interface)
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
@@ -837,8 +837,8 @@ EXPORT_SYMBOL_GPL(line6_disconnect);
 #ifdef CONFIG_PM
 
 /*
-	Suspend Line 6 device.
-*/
+ * Suspend Line 6 device.
+ */
 int line6_suspend(struct usb_interface *interface, pm_message_t message)
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
@@ -859,8 +859,8 @@ int line6_suspend(struct usb_interface *interface, pm_message_t message)
 EXPORT_SYMBOL_GPL(line6_suspend);
 
 /*
-	Resume Line 6 device.
-*/
+ * Resume Line 6 device.
+ */
 int line6_resume(struct usb_interface *interface)
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
index 6142559..b307944 100644
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -45,8 +45,8 @@
 #endif
 
 /*
-	Line 6 MIDI control commands
-*/
+ * Line 6 MIDI control commands
+ */
 #define LINE6_PARAM_CHANGE   0xb0
 #define LINE6_PROGRAM_CHANGE 0xc0
 #define LINE6_SYSEX_BEGIN    0xf0
@@ -54,14 +54,14 @@
 #define LINE6_RESET          0xff
 
 /*
-	MIDI channel for messages initiated by the host
-	(and eventually echoed back by the device)
-*/
+ * MIDI channel for messages initiated by the host
+ * (and eventually echoed back by the device)
+ */
 #define LINE6_CHANNEL_HOST   0x00
 
 /*
-	MIDI channel for messages initiated by the device
-*/
+ * MIDI channel for messages initiated by the device
+ */
 #define LINE6_CHANNEL_DEVICE 0x02
 
 #define LINE6_CHANNEL_UNKNOWN 5	/* don't know yet what this is good for */
@@ -81,8 +81,8 @@ static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
 static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
 
 /*
-	 Common properties of Line 6 devices.
-*/
+ * Common properties of Line 6 devices.
+ */
 struct line6_properties {
 	/* Card id string (maximum 16 characters).
 	 * This can be used to address the device in ALSA programs as
@@ -122,9 +122,9 @@ enum {
 };
 
 /*
-	 Common data shared by all Line 6 devices.
-	 Corresponds to a pair of USB endpoints.
-*/
+ * Common data shared by all Line 6 devices.
+ * Corresponds to a pair of USB endpoints.
+ */
 struct usb_line6 {
 	/* USB device */
 	struct usb_device *usbdev;
diff --git a/sound/usb/line6/midi.c b/sound/usb/line6/midi.c
index e2cf55c..092e226 100644
--- a/sound/usb/line6/midi.c
+++ b/sound/usb/line6/midi.c
@@ -25,8 +25,8 @@ static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
 			   int length);
 
 /*
-	Pass data received via USB to MIDI.
-*/
+ * Pass data received via USB to MIDI.
+ */
 void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
 			int length)
 {
@@ -36,8 +36,8 @@ void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
 }
 
 /*
-	Read data from MIDI buffer and transmit them via USB.
-*/
+ * Read data from MIDI buffer and transmit them via USB.
+ */
 static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
 {
 	struct usb_line6 *line6 =
@@ -70,8 +70,8 @@ static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
 }
 
 /*
-	Notification of completion of MIDI transmission.
-*/
+ * Notification of completion of MIDI transmission.
+ */
 static void midi_sent(struct urb *urb)
 {
 	unsigned long flags;
@@ -101,10 +101,10 @@ static void midi_sent(struct urb *urb)
 }
 
 /*
-	Send an asynchronous MIDI message.
-	Assumes that line6->line6midi->lock is held
-	(i.e., this function is serialized).
-*/
+ * Send an asynchronous MIDI message.
+ * Assumes that line6->line6midi->lock is held
+ * (i.e., this function is serialized).
+ */
 static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
 			   int length)
 {
@@ -255,8 +255,8 @@ static void snd_line6_midi_free(struct snd_rawmidi *rmidi)
 }
 
 /*
-	Initialize the Line 6 MIDI subsystem.
-*/
+ * Initialize the Line 6 MIDI subsystem.
+ */
 int line6_init_midi(struct usb_line6 *line6)
 {
 	int err;
diff --git a/sound/usb/line6/midibuf.c b/sound/usb/line6/midibuf.c
index 36a610b..251a80c 100644
--- a/sound/usb/line6/midibuf.c
+++ b/sound/usb/line6/midibuf.c
@@ -25,9 +25,9 @@ static int midibuf_message_length(unsigned char code)
 		message_length = length[(code >> 4) - 8];
 	} else {
 		/*
-		   Note that according to the MIDI specification 0xf2 is
-		   the "Song Position Pointer", but this is used by Line 6
-		   to send sysex messages to the host.
+		 * Note that according to the MIDI specification 0xf2 is
+		 * the "Song Position Pointer", but this is used by Line 6
+		 * to send sysex messages to the host.
 		 */
 		static const int length[] = { -1, 2, -1, 2, -1, -1, 1, 1, 1, 1,
 			1, 1, 1, -1, 1, 1
diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
index b3854f8..20a2da3 100644
--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -97,8 +97,8 @@ static int snd_line6_impulse_period_put(struct snd_kcontrol *kcontrol,
 }
 
 /*
-	Unlink all currently active URBs.
-*/
+ * Unlink all currently active URBs.
+ */
 static void line6_unlink_audio_urbs(struct snd_line6_pcm *line6pcm,
 				    struct line6_pcm_stream *pcms)
 {
@@ -113,8 +113,8 @@ static void line6_unlink_audio_urbs(struct snd_line6_pcm *line6pcm,
 }
 
 /*
-	Wait until unlinking of all currently active URBs has been finished.
-*/
+ * Wait until unlinking of all currently active URBs has been finished.
+ */
 static void line6_wait_clear_audio_urbs(struct snd_line6_pcm *line6pcm,
 					struct line6_pcm_stream *pcms)
 {
@@ -455,8 +455,8 @@ static const struct snd_kcontrol_new line6_controls[] = {
 };
 
 /*
-	Cleanup the PCM device.
-*/
+ * Cleanup the PCM device.
+ */
 static void cleanup_urbs(struct line6_pcm_stream *pcms, int iso_buffers)
 {
 	int i;
@@ -511,8 +511,8 @@ static int snd_line6_new_pcm(struct usb_line6 *line6, struct snd_pcm **pcm_ret)
 }
 
 /*
-	Sync with PCM stream stops.
-*/
+ * Sync with PCM stream stops.
+ */
 void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm)
 {
 	line6_unlink_audio_urbs(line6pcm, &line6pcm->out);
@@ -522,9 +522,9 @@ void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Create and register the PCM device and mixer entries.
-	Create URBs for playback and capture.
-*/
+ * Create and register the PCM device and mixer entries.
+ * Create URBs for playback and capture.
+ */
 int line6_init_pcm(struct usb_line6 *line6,
 		   struct line6_pcm_properties *properties)
 {
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h
index bb0c9cb..acef244 100644
--- a/sound/usb/line6/pcm.h
+++ b/sound/usb/line6/pcm.h
@@ -10,8 +10,8 @@
  */
 
 /*
-	PCM interface to POD series devices.
-*/
+ * PCM interface to POD series devices.
+ */
 
 #ifndef PCM_H
 #define PCM_H
@@ -21,11 +21,11 @@
 #include "driver.h"
 
 /*
-	number of USB frames per URB
-	The Line 6 Windows driver always transmits two frames per packet, but
-	the Linux driver performs significantly better (i.e., lower latency)
-	with only one frame per packet.
-*/
+ * number of USB frames per URB
+ * The Line 6 Windows driver always transmits two frames per packet, but
+ * the Linux driver performs significantly better (i.e., lower latency)
+ * with only one frame per packet.
+ */
 #define LINE6_ISO_PACKETS	1
 
 /* in a "full speed" device (such as the PODxt Pro) this means 1ms,
@@ -36,37 +36,37 @@
 #define LINE6_IMPULSE_DEFAULT_PERIOD 100
 
 /*
-	Get substream from Line 6 PCM data structure
-*/
+ * Get substream from Line 6 PCM data structure
+ */
 #define get_substream(line6pcm, stream)	\
 		(line6pcm->pcm->streams[stream].substream)
 
 /*
-	PCM mode bits.
-
-	There are several features of the Line 6 USB driver which require PCM
-	data to be exchanged with the device:
-	*) PCM playback and capture via ALSA
-	*) software monitoring (for devices without hardware monitoring)
-	*) optional impulse response measurement
-	However, from the device's point of view, there is just a single
-	capture and playback stream, which must be shared between these
-	subsystems. It is therefore necessary to maintain the state of the
-	subsystems with respect to PCM usage.
-
-	We define two bit flags, "opened" and "running", for each playback
-	or capture stream.  Both can contain the bit flag corresponding to
-	LINE6_STREAM_* type,
-	  LINE6_STREAM_PCM = ALSA PCM playback or capture
-	  LINE6_STREAM_MONITOR = software monitoring
-	  IMPULSE = optional impulse response measurement
-	The opened flag indicates whether the buffer is allocated while
-	the running flag indicates whether the stream is running.
-
-	For monitor or impulse operations, the driver needs to call
-	line6_pcm_acquire() or line6_pcm_release() with the appropriate
-	LINE6_STREAM_* flag.
-*/
+ * PCM mode bits.
+ *
+ * There are several features of the Line 6 USB driver which require PCM
+ * data to be exchanged with the device:
+ * *) PCM playback and capture via ALSA
+ * *) software monitoring (for devices without hardware monitoring)
+ * *) optional impulse response measurement
+ * However, from the device's point of view, there is just a single
+ * capture and playback stream, which must be shared between these
+ * subsystems. It is therefore necessary to maintain the state of the
+ * subsystems with respect to PCM usage.
+ *
+ * We define two bit flags, "opened" and "running", for each playback
+ * or capture stream.  Both can contain the bit flag corresponding to
+ * LINE6_STREAM_* type,
+ * LINE6_STREAM_PCM = ALSA PCM playback or capture
+ * LINE6_STREAM_MONITOR = software monitoring
+ * IMPULSE = optional impulse response measurement
+ * The opened flag indicates whether the buffer is allocated while
+ * the running flag indicates whether the stream is running.
+ *
+ * For monitor or impulse operations, the driver needs to call
+ * line6_pcm_acquire() or line6_pcm_release() with the appropriate
+ * LINE6_STREAM_* flag.
+ */
 
 /* stream types */
 enum {
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
index 819e9b2..674502c 100644
--- a/sound/usb/line6/playback.c
+++ b/sound/usb/line6/playback.c
@@ -20,8 +20,8 @@
 #include "playback.h"
 
 /*
-	Software stereo volume control.
-*/
+ * Software stereo volume control.
+ */
 static void change_volume(struct urb *urb_out, int volume[],
 			  int bytes_per_frame)
 {
@@ -64,8 +64,8 @@ static void change_volume(struct urb *urb_out, int volume[],
 }
 
 /*
-	Create signal for impulse response test.
-*/
+ * Create signal for impulse response test.
+ */
 static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm,
 				       struct urb *urb_out, int bytes_per_frame)
 {
@@ -107,8 +107,8 @@ static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm,
 }
 
 /*
-	Add signal to buffer for software monitoring.
-*/
+ * Add signal to buffer for software monitoring.
+ */
 static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
 			       int volume, int bytes_per_frame)
 {
@@ -132,15 +132,15 @@ static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
 	}
 
 	/*
-	   We don't need to handle devices with 6 bytes per frame here
-	   since they all support hardware monitoring.
+	 * We don't need to handle devices with 6 bytes per frame here
+	 * since they all support hardware monitoring.
 	 */
 }
 
 /*
-	Find a free URB, prepare audio data, and submit URB.
-	must be called in line6pcm->out.lock context
-*/
+ * Find a free URB, prepare audio data, and submit URB.
+ * must be called in line6pcm->out.lock context
+ */
 static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 {
 	int index;
@@ -211,8 +211,8 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 
 		if (line6pcm->out.pos + urb_frames > runtime->buffer_size) {
 			/*
-			   The transferred area goes over buffer boundary,
-			   copy the data to the temp buffer.
+			 * The transferred area goes over buffer boundary,
+			 * copy the data to the temp buffer.
 			 */
 			int len;
 
@@ -284,8 +284,8 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Submit all currently available playback URBs.
-	must be called in line6pcm->out.lock context
+ * Submit all currently available playback URBs.
+ * must be called in line6pcm->out.lock context
  */
 int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm)
 {
@@ -301,8 +301,8 @@ int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Callback for completed playback URB.
-*/
+ * Callback for completed playback URB.
+ */
 static void audio_out_callback(struct urb *urb)
 {
 	int i, index, length = 0, shutdown = 0;
diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c
index 020c818..80414ed 100644
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -23,21 +23,21 @@
 #include "playback.h"
 
 /*
-	Locate name in binary program dump
-*/
+ * Locate name in binary program dump
+ */
 #define	POD_NAME_OFFSET 0
 #define	POD_NAME_LENGTH 16
 
 /*
-	Other constants
-*/
+ * Other constants
+ */
 #define POD_CONTROL_SIZE 0x80
 #define POD_BUFSIZE_DUMPREQ 7
 #define POD_STARTUP_DELAY 1000
 
 /*
-	Stages of POD startup procedure
-*/
+ * Stages of POD startup procedure
+ */
 enum {
 	POD_STARTUP_INIT = 1,
 	POD_STARTUP_VERSIONREQ,
@@ -185,8 +185,8 @@ static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
 }
 
 /*
-	Process a completely received message.
-*/
+ * Process a completely received message.
+ */
 static void line6_pod_process_message(struct usb_line6 *line6)
 {
 	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
@@ -216,8 +216,8 @@ static void line6_pod_process_message(struct usb_line6 *line6)
 }
 
 /*
-	Send system parameter (from integer).
-*/
+ * Send system parameter (from integer).
+ */
 static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
 				    int code)
 {
@@ -238,8 +238,8 @@ static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
 }
 
 /*
-	"read" request on "serial_number" special file.
-*/
+ * "read" request on "serial_number" special file.
+ */
 static ssize_t serial_number_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
@@ -250,8 +250,8 @@ static ssize_t serial_number_show(struct device *dev,
 }
 
 /*
-	"read" request on "firmware_version" special file.
-*/
+ * "read" request on "firmware_version" special file.
+ */
 static ssize_t firmware_version_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
@@ -263,8 +263,8 @@ static ssize_t firmware_version_show(struct device *dev,
 }
 
 /*
-	"read" request on "device_id" special file.
-*/
+ * "read" request on "device_id" special file.
+ */
 static ssize_t device_id_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
@@ -275,11 +275,11 @@ static ssize_t device_id_show(struct device *dev,
 }
 
 /*
-	POD startup procedure.
-	This is a sequence of functions with special requirements (e.g., must
-	not run immediately after initialization, must not run in interrupt
-	context). After the last one has finished, the device is ready to use.
-*/
+ * POD startup procedure.
+ * This is a sequence of functions with special requirements (e.g., must
+ * not run immediately after initialization, must not run in interrupt
+ * context). After the last one has finished, the device is ready to use.
+ */
 
 static void pod_startup1(struct usb_line6_pod *pod)
 {
@@ -390,8 +390,8 @@ static const struct snd_kcontrol_new pod_control_monitor = {
 };
 
 /*
-	POD device disconnected.
-*/
+ * POD device disconnected.
+ */
 static void line6_pod_disconnect(struct usb_line6 *line6)
 {
 	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6;
@@ -401,8 +401,8 @@ static void line6_pod_disconnect(struct usb_line6 *line6)
 }
 
 /*
-	 Try to init POD device.
-*/
+ * Try to init POD device.
+ */
 static int pod_init(struct usb_line6 *line6,
 		    const struct usb_device_id *id)
 {
@@ -437,9 +437,9 @@ static int pod_init(struct usb_line6 *line6,
 		return err;
 
 	/*
-	   When the sound card is registered at this point, the PODxt Live
-	   displays "Invalid Code Error 07", so we do it later in the event
-	   handler.
+	 * When the sound card is registered at this point, the PODxt Live
+	 * displays "Invalid Code Error 07", so we do it later in the event
+	 * handler.
 	 */
 
 	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
@@ -561,8 +561,8 @@ static const struct line6_properties pod_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int pod_probe(struct usb_interface *interface,
 		     const struct usb_device_id *id)
 {
diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c
index 36ed9c8..c91db46 100644
--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -308,8 +308,8 @@ static void podhd_disconnect(struct usb_line6 *line6)
 }
 
 /*
-	Try to init POD HD device.
-*/
+ * Try to init POD HD device.
+ */
 static int podhd_init(struct usb_line6 *line6,
 		      const struct usb_device_id *id)
 {
@@ -482,8 +482,8 @@ static const struct line6_properties podhd_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int podhd_probe(struct usb_interface *interface,
 		       const struct usb_device_id *id)
 {
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c
index 750467f..ef0f591 100644
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -272,11 +272,11 @@ static const struct snd_kcontrol_new toneport_control_source = {
 };
 
 /*
-	For the led on Guitarport.
-	Brightness goes from 0x00 to 0x26. Set a value above this to have led
-	blink.
-	(void cmd_0x02(byte red, byte green)
-*/
+ * For the led on Guitarport.
+ * Brightness goes from 0x00 to 0x26. Set a value above this to have led
+ * blink.
+ * (void cmd_0x02(byte red, byte green)
+ */
 
 static bool toneport_has_led(struct usb_line6_toneport *toneport)
 {
@@ -363,8 +363,8 @@ static bool toneport_has_source_select(struct usb_line6_toneport *toneport)
 }
 
 /*
-	Setup Toneport device.
-*/
+ * Setup Toneport device.
+ */
 static void toneport_setup(struct usb_line6_toneport *toneport)
 {
 	int ticks;
@@ -391,8 +391,8 @@ static void toneport_setup(struct usb_line6_toneport *toneport)
 }
 
 /*
-	Toneport device disconnected.
-*/
+ * Toneport device disconnected.
+ */
 static void line6_toneport_disconnect(struct usb_line6 *line6)
 {
 	struct usb_line6_toneport *toneport =
@@ -406,8 +406,8 @@ static void line6_toneport_disconnect(struct usb_line6 *line6)
 
 
 /*
-	 Try to init Toneport device.
-*/
+ * Try to init Toneport device.
+ */
 static int toneport_init(struct usb_line6 *line6,
 			 const struct usb_device_id *id)
 {
@@ -458,8 +458,8 @@ static int toneport_init(struct usb_line6 *line6,
 
 #ifdef CONFIG_PM
 /*
-	Resume Toneport device after reset.
-*/
+ * Resume Toneport device after reset.
+ */
 static int toneport_reset_resume(struct usb_interface *interface)
 {
 	toneport_setup(usb_get_intfdata(interface));
@@ -551,8 +551,8 @@ static const struct line6_properties toneport_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int toneport_probe(struct usb_interface *interface,
 			  const struct usb_device_id *id)
 {
diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c
index e8c852b..ebfdc8a 100644
--- a/sound/usb/line6/variax.c
+++ b/sound/usb/line6/variax.c
@@ -23,8 +23,8 @@
 #define VARIAX_STARTUP_DELAY4 100
 
 /*
-	Stages of Variax startup procedure
-*/
+ * Stages of Variax startup procedure
+ */
 enum {
 	VARIAX_STARTUP_INIT = 1,
 	VARIAX_STARTUP_VERSIONREQ,
@@ -61,17 +61,17 @@ struct usb_line6_variax {
 #define VARIAX_OFFSET_ACTIVATE 7
 
 /*
-	This message is sent by the device during initialization and identifies
-	the connected guitar version.
-*/
+ * This message is sent by the device during initialization and identifies
+ * the connected guitar version.
+ */
 static const char variax_init_version[] = {
 	0xf0, 0x7e, 0x7f, 0x06, 0x02, 0x00, 0x01, 0x0c,
 	0x07, 0x00, 0x00, 0x00
 };
 
 /*
-	This message is the last one sent by the device during initialization.
-*/
+ * This message is the last one sent by the device during initialization.
+ */
 static const char variax_init_done[] = {
 	0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x6b
 };
@@ -94,11 +94,11 @@ static void variax_activate_async(struct usb_line6_variax *variax, int a)
 }
 
 /*
-	Variax startup procedure.
-	This is a sequence of functions with special requirements (e.g., must
-	not run immediately after initialization, must not run in interrupt
-	context). After the last one has finished, the device is ready to use.
-*/
+ * Variax startup procedure.
+ * This is a sequence of functions with special requirements (e.g., must
+ * not run immediately after initialization, must not run in interrupt
+ * context). After the last one has finished, the device is ready to use.
+ */
 
 static void variax_startup1(struct usb_line6_variax *variax)
 {
@@ -171,8 +171,8 @@ static void variax_startup6(struct work_struct *work)
 }
 
 /*
-	Process a completely received message.
-*/
+ * Process a completely received message.
+ */
 static void line6_variax_process_message(struct usb_line6 *line6)
 {
 	struct usb_line6_variax *variax = (struct usb_line6_variax *) line6;
@@ -197,8 +197,8 @@ static void line6_variax_process_message(struct usb_line6 *line6)
 }
 
 /*
-	Variax destructor.
-*/
+ * Variax destructor.
+ */
 static void line6_variax_disconnect(struct usb_line6 *line6)
 {
 	struct usb_line6_variax *variax = (struct usb_line6_variax *)line6;
@@ -211,8 +211,8 @@ static void line6_variax_disconnect(struct usb_line6 *line6)
 }
 
 /*
-	 Try to init workbench device.
-*/
+ * Try to init workbench device.
+ */
 static int variax_init(struct usb_line6 *line6,
 		       const struct usb_device_id *id)
 {
@@ -280,9 +280,8 @@ static const struct line6_properties variax_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int variax_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {
--
2.7.4

[PATCH 1/3] sound/line6: checkpatch: fix block comment style

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org

This patch fixed the style of multiline comments in sound/usb/line6.

Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Signed-off-by: Daniel Graefe <daniel.graefe@fau.de>
---
 sound/usb/line6/capture.c  |  20 ++++-----
 sound/usb/line6/driver.c   | 100 ++++++++++++++++++++++-----------------------
 sound/usb/line6/driver.h   |  24 +++++------
 sound/usb/line6/midi.c     |  24 +++++------
 sound/usb/line6/midibuf.c  |   6 +--
 sound/usb/line6/pcm.c      |  22 +++++-----
 sound/usb/line6/pcm.h      |  68 +++++++++++++++---------------
 sound/usb/line6/playback.c |  34 +++++++--------
 sound/usb/line6/pod.c      |  60 +++++++++++++--------------
 sound/usb/line6/podhd.c    |   8 ++--
 sound/usb/line6/toneport.c |  30 +++++++-------
 sound/usb/line6/variax.c   |  40 +++++++++---------
 12 files changed, 218 insertions(+), 218 deletions(-)

diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c
index 947d616..321605c 100644
--- a/sound/usb/line6/capture.c
+++ b/sound/usb/line6/capture.c
@@ -19,9 +19,9 @@
 #include "pcm.h"
 
 /*
-	Find a free URB and submit it.
-	must be called in line6pcm->in.lock context
-*/
+ * Find a free URB and submit it.
+ * must be called in line6pcm->in.lock context
+ */
 static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
 {
 	int index;
@@ -66,9 +66,9 @@ static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Submit all currently available capture URBs.
-	must be called in line6pcm->in.lock context
-*/
+ * Submit all currently available capture URBs.
+ * must be called in line6pcm->in.lock context
+ */
 int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm)
 {
 	int ret = 0, i;
@@ -83,8 +83,8 @@ int line6_submit_audio_in_all_urbs(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Copy data into ALSA capture buffer.
-*/
+ * Copy data into ALSA capture buffer.
+ */
 void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf, int fsize)
 {
 	struct snd_pcm_substream *substream =
@@ -100,8 +100,8 @@ void line6_capture_copy(struct snd_line6_pcm *line6pcm, char *fbuf, int fsize)
 
 	if (line6pcm->in.pos_done + frames > runtime->buffer_size) {
 		/*
-		   The transferred area goes over buffer boundary,
-		   copy two separate chunks.
+		 * The transferred area goes over buffer boundary,
+		 * copy two separate chunks.
 		 */
 		int len;
 
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index c1376bf..df7e761 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -28,24 +28,24 @@
 #define DRIVER_DESC    "Line 6 USB Driver"
 
 /*
-	This is Line 6's MIDI manufacturer ID.
-*/
+ * This is Line 6's MIDI manufacturer ID.
+ */
 const unsigned char line6_midi_id[3] = {
 	0x00, 0x01, 0x0c
 };
 EXPORT_SYMBOL_GPL(line6_midi_id);
 
 /*
-	Code to request version of POD, Variax interface
-	(and maybe other devices).
-*/
+ * Code to request version of POD, Variax interface
+ * (and maybe other devices).
+ */
 static const char line6_request_version[] = {
 	0xf0, 0x7e, 0x7f, 0x06, 0x01, 0xf7
 };
 
 /*
-	 Class for asynchronous messages.
-*/
+ * Class for asynchronous messages.
+ */
 struct message {
 	struct usb_line6 *line6;
 	const char *buffer;
@@ -54,15 +54,15 @@ struct message {
 };
 
 /*
-	Forward declarations.
-*/
+ * Forward declarations.
+ */
 static void line6_data_received(struct urb *urb);
 static int line6_send_raw_message_async_part(struct message *msg,
 					     struct urb *urb);
 
 /*
-	Start to listen on endpoint.
-*/
+ * Start to listen on endpoint.
+ */
 static int line6_start_listen(struct usb_line6 *line6)
 {
 	int err;
@@ -91,16 +91,16 @@ static int line6_start_listen(struct usb_line6 *line6)
 }
 
 /*
-	Stop listening on endpoint.
-*/
+ * Stop listening on endpoint.
+ */
 static void line6_stop_listen(struct usb_line6 *line6)
 {
 	usb_kill_urb(line6->urb_listen);
 }
 
 /*
-	Send raw message in pieces of wMaxPacketSize bytes.
-*/
+ * Send raw message in pieces of wMaxPacketSize bytes.
+ */
 static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 				  int size)
 {
@@ -138,8 +138,8 @@ static int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
 }
 
 /*
-	Notification of completion of asynchronous request transmission.
-*/
+ * Notification of completion of asynchronous request transmission.
+ */
 static void line6_async_request_sent(struct urb *urb)
 {
 	struct message *msg = (struct message *)urb->context;
@@ -152,8 +152,8 @@ static void line6_async_request_sent(struct urb *urb)
 }
 
 /*
-	Asynchronously send part of a raw message.
-*/
+ * Asynchronously send part of a raw message.
+ */
 static int line6_send_raw_message_async_part(struct message *msg,
 					     struct urb *urb)
 {
@@ -196,8 +196,8 @@ static int line6_send_raw_message_async_part(struct message *msg,
 }
 
 /*
-	Setup and start timer.
-*/
+ * Setup and start timer.
+ */
 void line6_start_timer(struct timer_list *timer, unsigned long msecs,
 		       void (*function)(struct timer_list *t))
 {
@@ -207,8 +207,8 @@ void line6_start_timer(struct timer_list *timer, unsigned long msecs,
 EXPORT_SYMBOL_GPL(line6_start_timer);
 
 /*
-	Asynchronously send raw message.
-*/
+ * Asynchronously send raw message.
+ */
 int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 				 int size)
 {
@@ -240,8 +240,8 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
 EXPORT_SYMBOL_GPL(line6_send_raw_message_async);
 
 /*
-	Send asynchronous device version request.
-*/
+ * Send asynchronous device version request.
+ */
 int line6_version_request_async(struct usb_line6 *line6)
 {
 	char *buffer;
@@ -260,8 +260,8 @@ int line6_version_request_async(struct usb_line6 *line6)
 EXPORT_SYMBOL_GPL(line6_version_request_async);
 
 /*
-	Send sysex message in pieces of wMaxPacketSize bytes.
-*/
+ * Send sysex message in pieces of wMaxPacketSize bytes.
+ */
 int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
 			     int size)
 {
@@ -272,10 +272,10 @@ int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
 EXPORT_SYMBOL_GPL(line6_send_sysex_message);
 
 /*
-	Allocate buffer for sysex message and prepare header.
-	@param code sysex message code
-	@param size number of bytes between code and sysex end
-*/
+ * Allocate buffer for sysex message and prepare header.
+ * @param code sysex message code
+ * @param size number of bytes between code and sysex end
+ */
 char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
 			       int size)
 {
@@ -294,8 +294,8 @@ char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
 EXPORT_SYMBOL_GPL(line6_alloc_sysex_buffer);
 
 /*
-	Notification of data received from the Line 6 device.
-*/
+ * Notification of data received from the Line 6 device.
+ */
 static void line6_data_received(struct urb *urb)
 {
 	struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
@@ -344,8 +344,8 @@ static void line6_data_received(struct urb *urb)
 #define LINE6_READ_WRITE_MAX_RETRIES 50
 
 /*
-	Read data from device.
-*/
+ * Read data from device.
+ */
 int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
 		    unsigned datalen)
 {
@@ -415,8 +415,8 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
 EXPORT_SYMBOL_GPL(line6_read_data);
 
 /*
-	Write data to device.
-*/
+ * Write data to device.
+ */
 int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
 		     unsigned datalen)
 {
@@ -473,9 +473,9 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
 EXPORT_SYMBOL_GPL(line6_write_data);
 
 /*
-	Read Line 6 device serial number.
-	(POD, TonePort, GuitarPort)
-*/
+ * Read Line 6 device serial number.
+ * (POD, TonePort, GuitarPort)
+ */
 int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
 {
 	return line6_read_data(line6, 0x80d0, serial_number,
@@ -484,8 +484,8 @@ int line6_read_serial_number(struct usb_line6 *line6, u32 *serial_number)
 EXPORT_SYMBOL_GPL(line6_read_serial_number);
 
 /*
-	Card destructor.
-*/
+ * Card destructor.
+ */
 static void line6_destruct(struct snd_card *card)
 {
 	struct usb_line6 *line6 = card->private_data;
@@ -711,8 +711,8 @@ static int line6_init_cap_control(struct usb_line6 *line6)
 }
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 int line6_probe(struct usb_interface *interface,
 		const struct usb_device_id *id,
 		const char *driver_name,
@@ -802,8 +802,8 @@ int line6_probe(struct usb_interface *interface,
 EXPORT_SYMBOL_GPL(line6_probe);
 
 /*
-	Line 6 device disconnected.
-*/
+ * Line 6 device disconnected.
+ */
 void line6_disconnect(struct usb_interface *interface)
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
@@ -837,8 +837,8 @@ EXPORT_SYMBOL_GPL(line6_disconnect);
 #ifdef CONFIG_PM
 
 /*
-	Suspend Line 6 device.
-*/
+ * Suspend Line 6 device.
+ */
 int line6_suspend(struct usb_interface *interface, pm_message_t message)
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
@@ -859,8 +859,8 @@ int line6_suspend(struct usb_interface *interface, pm_message_t message)
 EXPORT_SYMBOL_GPL(line6_suspend);
 
 /*
-	Resume Line 6 device.
-*/
+ * Resume Line 6 device.
+ */
 int line6_resume(struct usb_interface *interface)
 {
 	struct usb_line6 *line6 = usb_get_intfdata(interface);
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
index 6142559..b307944 100644
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -45,8 +45,8 @@
 #endif
 
 /*
-	Line 6 MIDI control commands
-*/
+ * Line 6 MIDI control commands
+ */
 #define LINE6_PARAM_CHANGE   0xb0
 #define LINE6_PROGRAM_CHANGE 0xc0
 #define LINE6_SYSEX_BEGIN    0xf0
@@ -54,14 +54,14 @@
 #define LINE6_RESET          0xff
 
 /*
-	MIDI channel for messages initiated by the host
-	(and eventually echoed back by the device)
-*/
+ * MIDI channel for messages initiated by the host
+ * (and eventually echoed back by the device)
+ */
 #define LINE6_CHANNEL_HOST   0x00
 
 /*
-	MIDI channel for messages initiated by the device
-*/
+ * MIDI channel for messages initiated by the device
+ */
 #define LINE6_CHANNEL_DEVICE 0x02
 
 #define LINE6_CHANNEL_UNKNOWN 5	/* don't know yet what this is good for */
@@ -81,8 +81,8 @@ static const int SYSEX_DATA_OFS = sizeof(line6_midi_id) + 3;
 static const int SYSEX_EXTRA_SIZE = sizeof(line6_midi_id) + 4;
 
 /*
-	 Common properties of Line 6 devices.
-*/
+ * Common properties of Line 6 devices.
+ */
 struct line6_properties {
 	/* Card id string (maximum 16 characters).
 	 * This can be used to address the device in ALSA programs as
@@ -122,9 +122,9 @@ enum {
 };
 
 /*
-	 Common data shared by all Line 6 devices.
-	 Corresponds to a pair of USB endpoints.
-*/
+ * Common data shared by all Line 6 devices.
+ * Corresponds to a pair of USB endpoints.
+ */
 struct usb_line6 {
 	/* USB device */
 	struct usb_device *usbdev;
diff --git a/sound/usb/line6/midi.c b/sound/usb/line6/midi.c
index e2cf55c..092e226 100644
--- a/sound/usb/line6/midi.c
+++ b/sound/usb/line6/midi.c
@@ -25,8 +25,8 @@ static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
 			   int length);
 
 /*
-	Pass data received via USB to MIDI.
-*/
+ * Pass data received via USB to MIDI.
+ */
 void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
 			int length)
 {
@@ -36,8 +36,8 @@ void line6_midi_receive(struct usb_line6 *line6, unsigned char *data,
 }
 
 /*
-	Read data from MIDI buffer and transmit them via USB.
-*/
+ * Read data from MIDI buffer and transmit them via USB.
+ */
 static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
 {
 	struct usb_line6 *line6 =
@@ -70,8 +70,8 @@ static void line6_midi_transmit(struct snd_rawmidi_substream *substream)
 }
 
 /*
-	Notification of completion of MIDI transmission.
-*/
+ * Notification of completion of MIDI transmission.
+ */
 static void midi_sent(struct urb *urb)
 {
 	unsigned long flags;
@@ -101,10 +101,10 @@ static void midi_sent(struct urb *urb)
 }
 
 /*
-	Send an asynchronous MIDI message.
-	Assumes that line6->line6midi->lock is held
-	(i.e., this function is serialized).
-*/
+ * Send an asynchronous MIDI message.
+ * Assumes that line6->line6midi->lock is held
+ * (i.e., this function is serialized).
+ */
 static int send_midi_async(struct usb_line6 *line6, unsigned char *data,
 			   int length)
 {
@@ -255,8 +255,8 @@ static void snd_line6_midi_free(struct snd_rawmidi *rmidi)
 }
 
 /*
-	Initialize the Line 6 MIDI subsystem.
-*/
+ * Initialize the Line 6 MIDI subsystem.
+ */
 int line6_init_midi(struct usb_line6 *line6)
 {
 	int err;
diff --git a/sound/usb/line6/midibuf.c b/sound/usb/line6/midibuf.c
index 36a610b..251a80c 100644
--- a/sound/usb/line6/midibuf.c
+++ b/sound/usb/line6/midibuf.c
@@ -25,9 +25,9 @@ static int midibuf_message_length(unsigned char code)
 		message_length = length[(code >> 4) - 8];
 	} else {
 		/*
-		   Note that according to the MIDI specification 0xf2 is
-		   the "Song Position Pointer", but this is used by Line 6
-		   to send sysex messages to the host.
+		 * Note that according to the MIDI specification 0xf2 is
+		 * the "Song Position Pointer", but this is used by Line 6
+		 * to send sysex messages to the host.
 		 */
 		static const int length[] = { -1, 2, -1, 2, -1, -1, 1, 1, 1, 1,
 			1, 1, 1, -1, 1, 1
diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
index b3854f8..20a2da3 100644
--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -97,8 +97,8 @@ static int snd_line6_impulse_period_put(struct snd_kcontrol *kcontrol,
 }
 
 /*
-	Unlink all currently active URBs.
-*/
+ * Unlink all currently active URBs.
+ */
 static void line6_unlink_audio_urbs(struct snd_line6_pcm *line6pcm,
 				    struct line6_pcm_stream *pcms)
 {
@@ -113,8 +113,8 @@ static void line6_unlink_audio_urbs(struct snd_line6_pcm *line6pcm,
 }
 
 /*
-	Wait until unlinking of all currently active URBs has been finished.
-*/
+ * Wait until unlinking of all currently active URBs has been finished.
+ */
 static void line6_wait_clear_audio_urbs(struct snd_line6_pcm *line6pcm,
 					struct line6_pcm_stream *pcms)
 {
@@ -455,8 +455,8 @@ static const struct snd_kcontrol_new line6_controls[] = {
 };
 
 /*
-	Cleanup the PCM device.
-*/
+ * Cleanup the PCM device.
+ */
 static void cleanup_urbs(struct line6_pcm_stream *pcms, int iso_buffers)
 {
 	int i;
@@ -511,8 +511,8 @@ static int snd_line6_new_pcm(struct usb_line6 *line6, struct snd_pcm **pcm_ret)
 }
 
 /*
-	Sync with PCM stream stops.
-*/
+ * Sync with PCM stream stops.
+ */
 void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm)
 {
 	line6_unlink_audio_urbs(line6pcm, &line6pcm->out);
@@ -522,9 +522,9 @@ void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Create and register the PCM device and mixer entries.
-	Create URBs for playback and capture.
-*/
+ * Create and register the PCM device and mixer entries.
+ * Create URBs for playback and capture.
+ */
 int line6_init_pcm(struct usb_line6 *line6,
 		   struct line6_pcm_properties *properties)
 {
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h
index bb0c9cb..acef244 100644
--- a/sound/usb/line6/pcm.h
+++ b/sound/usb/line6/pcm.h
@@ -10,8 +10,8 @@
  */
 
 /*
-	PCM interface to POD series devices.
-*/
+ * PCM interface to POD series devices.
+ */
 
 #ifndef PCM_H
 #define PCM_H
@@ -21,11 +21,11 @@
 #include "driver.h"
 
 /*
-	number of USB frames per URB
-	The Line 6 Windows driver always transmits two frames per packet, but
-	the Linux driver performs significantly better (i.e., lower latency)
-	with only one frame per packet.
-*/
+ * number of USB frames per URB
+ * The Line 6 Windows driver always transmits two frames per packet, but
+ * the Linux driver performs significantly better (i.e., lower latency)
+ * with only one frame per packet.
+ */
 #define LINE6_ISO_PACKETS	1
 
 /* in a "full speed" device (such as the PODxt Pro) this means 1ms,
@@ -36,37 +36,37 @@
 #define LINE6_IMPULSE_DEFAULT_PERIOD 100
 
 /*
-	Get substream from Line 6 PCM data structure
-*/
+ * Get substream from Line 6 PCM data structure
+ */
 #define get_substream(line6pcm, stream)	\
 		(line6pcm->pcm->streams[stream].substream)
 
 /*
-	PCM mode bits.
-
-	There are several features of the Line 6 USB driver which require PCM
-	data to be exchanged with the device:
-	*) PCM playback and capture via ALSA
-	*) software monitoring (for devices without hardware monitoring)
-	*) optional impulse response measurement
-	However, from the device's point of view, there is just a single
-	capture and playback stream, which must be shared between these
-	subsystems. It is therefore necessary to maintain the state of the
-	subsystems with respect to PCM usage.
-
-	We define two bit flags, "opened" and "running", for each playback
-	or capture stream.  Both can contain the bit flag corresponding to
-	LINE6_STREAM_* type,
-	  LINE6_STREAM_PCM = ALSA PCM playback or capture
-	  LINE6_STREAM_MONITOR = software monitoring
-	  IMPULSE = optional impulse response measurement
-	The opened flag indicates whether the buffer is allocated while
-	the running flag indicates whether the stream is running.
-
-	For monitor or impulse operations, the driver needs to call
-	line6_pcm_acquire() or line6_pcm_release() with the appropriate
-	LINE6_STREAM_* flag.
-*/
+ * PCM mode bits.
+ *
+ * There are several features of the Line 6 USB driver which require PCM
+ * data to be exchanged with the device:
+ * *) PCM playback and capture via ALSA
+ * *) software monitoring (for devices without hardware monitoring)
+ * *) optional impulse response measurement
+ * However, from the device's point of view, there is just a single
+ * capture and playback stream, which must be shared between these
+ * subsystems. It is therefore necessary to maintain the state of the
+ * subsystems with respect to PCM usage.
+ *
+ * We define two bit flags, "opened" and "running", for each playback
+ * or capture stream.  Both can contain the bit flag corresponding to
+ * LINE6_STREAM_* type,
+ * LINE6_STREAM_PCM = ALSA PCM playback or capture
+ * LINE6_STREAM_MONITOR = software monitoring
+ * IMPULSE = optional impulse response measurement
+ * The opened flag indicates whether the buffer is allocated while
+ * the running flag indicates whether the stream is running.
+ *
+ * For monitor or impulse operations, the driver needs to call
+ * line6_pcm_acquire() or line6_pcm_release() with the appropriate
+ * LINE6_STREAM_* flag.
+ */
 
 /* stream types */
 enum {
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
index 819e9b2..674502c 100644
--- a/sound/usb/line6/playback.c
+++ b/sound/usb/line6/playback.c
@@ -20,8 +20,8 @@
 #include "playback.h"
 
 /*
-	Software stereo volume control.
-*/
+ * Software stereo volume control.
+ */
 static void change_volume(struct urb *urb_out, int volume[],
 			  int bytes_per_frame)
 {
@@ -64,8 +64,8 @@ static void change_volume(struct urb *urb_out, int volume[],
 }
 
 /*
-	Create signal for impulse response test.
-*/
+ * Create signal for impulse response test.
+ */
 static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm,
 				       struct urb *urb_out, int bytes_per_frame)
 {
@@ -107,8 +107,8 @@ static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm,
 }
 
 /*
-	Add signal to buffer for software monitoring.
-*/
+ * Add signal to buffer for software monitoring.
+ */
 static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
 			       int volume, int bytes_per_frame)
 {
@@ -132,15 +132,15 @@ static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
 	}
 
 	/*
-	   We don't need to handle devices with 6 bytes per frame here
-	   since they all support hardware monitoring.
+	 * We don't need to handle devices with 6 bytes per frame here
+	 * since they all support hardware monitoring.
 	 */
 }
 
 /*
-	Find a free URB, prepare audio data, and submit URB.
-	must be called in line6pcm->out.lock context
-*/
+ * Find a free URB, prepare audio data, and submit URB.
+ * must be called in line6pcm->out.lock context
+ */
 static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 {
 	int index;
@@ -211,8 +211,8 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 
 		if (line6pcm->out.pos + urb_frames > runtime->buffer_size) {
 			/*
-			   The transferred area goes over buffer boundary,
-			   copy the data to the temp buffer.
+			 * The transferred area goes over buffer boundary,
+			 * copy the data to the temp buffer.
 			 */
 			int len;
 
@@ -284,8 +284,8 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Submit all currently available playback URBs.
-	must be called in line6pcm->out.lock context
+ * Submit all currently available playback URBs.
+ * must be called in line6pcm->out.lock context
  */
 int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm)
 {
@@ -301,8 +301,8 @@ int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Callback for completed playback URB.
-*/
+ * Callback for completed playback URB.
+ */
 static void audio_out_callback(struct urb *urb)
 {
 	int i, index, length = 0, shutdown = 0;
diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c
index 020c818..80414ed 100644
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -23,21 +23,21 @@
 #include "playback.h"
 
 /*
-	Locate name in binary program dump
-*/
+ * Locate name in binary program dump
+ */
 #define	POD_NAME_OFFSET 0
 #define	POD_NAME_LENGTH 16
 
 /*
-	Other constants
-*/
+ * Other constants
+ */
 #define POD_CONTROL_SIZE 0x80
 #define POD_BUFSIZE_DUMPREQ 7
 #define POD_STARTUP_DELAY 1000
 
 /*
-	Stages of POD startup procedure
-*/
+ * Stages of POD startup procedure
+ */
 enum {
 	POD_STARTUP_INIT = 1,
 	POD_STARTUP_VERSIONREQ,
@@ -185,8 +185,8 @@ static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
 }
 
 /*
-	Process a completely received message.
-*/
+ * Process a completely received message.
+ */
 static void line6_pod_process_message(struct usb_line6 *line6)
 {
 	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
@@ -216,8 +216,8 @@ static void line6_pod_process_message(struct usb_line6 *line6)
 }
 
 /*
-	Send system parameter (from integer).
-*/
+ * Send system parameter (from integer).
+ */
 static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
 				    int code)
 {
@@ -238,8 +238,8 @@ static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
 }
 
 /*
-	"read" request on "serial_number" special file.
-*/
+ * "read" request on "serial_number" special file.
+ */
 static ssize_t serial_number_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
@@ -250,8 +250,8 @@ static ssize_t serial_number_show(struct device *dev,
 }
 
 /*
-	"read" request on "firmware_version" special file.
-*/
+ * "read" request on "firmware_version" special file.
+ */
 static ssize_t firmware_version_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
@@ -263,8 +263,8 @@ static ssize_t firmware_version_show(struct device *dev,
 }
 
 /*
-	"read" request on "device_id" special file.
-*/
+ * "read" request on "device_id" special file.
+ */
 static ssize_t device_id_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
@@ -275,11 +275,11 @@ static ssize_t device_id_show(struct device *dev,
 }
 
 /*
-	POD startup procedure.
-	This is a sequence of functions with special requirements (e.g., must
-	not run immediately after initialization, must not run in interrupt
-	context). After the last one has finished, the device is ready to use.
-*/
+ * POD startup procedure.
+ * This is a sequence of functions with special requirements (e.g., must
+ * not run immediately after initialization, must not run in interrupt
+ * context). After the last one has finished, the device is ready to use.
+ */
 
 static void pod_startup1(struct usb_line6_pod *pod)
 {
@@ -390,8 +390,8 @@ static const struct snd_kcontrol_new pod_control_monitor = {
 };
 
 /*
-	POD device disconnected.
-*/
+ * POD device disconnected.
+ */
 static void line6_pod_disconnect(struct usb_line6 *line6)
 {
 	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6;
@@ -401,8 +401,8 @@ static void line6_pod_disconnect(struct usb_line6 *line6)
 }
 
 /*
-	 Try to init POD device.
-*/
+ * Try to init POD device.
+ */
 static int pod_init(struct usb_line6 *line6,
 		    const struct usb_device_id *id)
 {
@@ -437,9 +437,9 @@ static int pod_init(struct usb_line6 *line6,
 		return err;
 
 	/*
-	   When the sound card is registered at this point, the PODxt Live
-	   displays "Invalid Code Error 07", so we do it later in the event
-	   handler.
+	 * When the sound card is registered at this point, the PODxt Live
+	 * displays "Invalid Code Error 07", so we do it later in the event
+	 * handler.
 	 */
 
 	if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
@@ -561,8 +561,8 @@ static const struct line6_properties pod_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int pod_probe(struct usb_interface *interface,
 		     const struct usb_device_id *id)
 {
diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c
index 36ed9c8..c91db46 100644
--- a/sound/usb/line6/podhd.c
+++ b/sound/usb/line6/podhd.c
@@ -308,8 +308,8 @@ static void podhd_disconnect(struct usb_line6 *line6)
 }
 
 /*
-	Try to init POD HD device.
-*/
+ * Try to init POD HD device.
+ */
 static int podhd_init(struct usb_line6 *line6,
 		      const struct usb_device_id *id)
 {
@@ -482,8 +482,8 @@ static const struct line6_properties podhd_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int podhd_probe(struct usb_interface *interface,
 		       const struct usb_device_id *id)
 {
diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c
index 750467f..ef0f591 100644
--- a/sound/usb/line6/toneport.c
+++ b/sound/usb/line6/toneport.c
@@ -272,11 +272,11 @@ static const struct snd_kcontrol_new toneport_control_source = {
 };
 
 /*
-	For the led on Guitarport.
-	Brightness goes from 0x00 to 0x26. Set a value above this to have led
-	blink.
-	(void cmd_0x02(byte red, byte green)
-*/
+ * For the led on Guitarport.
+ * Brightness goes from 0x00 to 0x26. Set a value above this to have led
+ * blink.
+ * (void cmd_0x02(byte red, byte green)
+ */
 
 static bool toneport_has_led(struct usb_line6_toneport *toneport)
 {
@@ -363,8 +363,8 @@ static bool toneport_has_source_select(struct usb_line6_toneport *toneport)
 }
 
 /*
-	Setup Toneport device.
-*/
+ * Setup Toneport device.
+ */
 static void toneport_setup(struct usb_line6_toneport *toneport)
 {
 	int ticks;
@@ -391,8 +391,8 @@ static void toneport_setup(struct usb_line6_toneport *toneport)
 }
 
 /*
-	Toneport device disconnected.
-*/
+ * Toneport device disconnected.
+ */
 static void line6_toneport_disconnect(struct usb_line6 *line6)
 {
 	struct usb_line6_toneport *toneport =
@@ -406,8 +406,8 @@ static void line6_toneport_disconnect(struct usb_line6 *line6)
 
 
 /*
-	 Try to init Toneport device.
-*/
+ * Try to init Toneport device.
+ */
 static int toneport_init(struct usb_line6 *line6,
 			 const struct usb_device_id *id)
 {
@@ -458,8 +458,8 @@ static int toneport_init(struct usb_line6 *line6,
 
 #ifdef CONFIG_PM
 /*
-	Resume Toneport device after reset.
-*/
+ * Resume Toneport device after reset.
+ */
 static int toneport_reset_resume(struct usb_interface *interface)
 {
 	toneport_setup(usb_get_intfdata(interface));
@@ -551,8 +551,8 @@ static const struct line6_properties toneport_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int toneport_probe(struct usb_interface *interface,
 			  const struct usb_device_id *id)
 {
diff --git a/sound/usb/line6/variax.c b/sound/usb/line6/variax.c
index e8c852b..ebfdc8a 100644
--- a/sound/usb/line6/variax.c
+++ b/sound/usb/line6/variax.c
@@ -23,8 +23,8 @@
 #define VARIAX_STARTUP_DELAY4 100
 
 /*
-	Stages of Variax startup procedure
-*/
+ * Stages of Variax startup procedure
+ */
 enum {
 	VARIAX_STARTUP_INIT = 1,
 	VARIAX_STARTUP_VERSIONREQ,
@@ -61,17 +61,17 @@ struct usb_line6_variax {
 #define VARIAX_OFFSET_ACTIVATE 7
 
 /*
-	This message is sent by the device during initialization and identifies
-	the connected guitar version.
-*/
+ * This message is sent by the device during initialization and identifies
+ * the connected guitar version.
+ */
 static const char variax_init_version[] = {
 	0xf0, 0x7e, 0x7f, 0x06, 0x02, 0x00, 0x01, 0x0c,
 	0x07, 0x00, 0x00, 0x00
 };
 
 /*
-	This message is the last one sent by the device during initialization.
-*/
+ * This message is the last one sent by the device during initialization.
+ */
 static const char variax_init_done[] = {
 	0xf0, 0x00, 0x01, 0x0c, 0x07, 0x00, 0x6b
 };
@@ -94,11 +94,11 @@ static void variax_activate_async(struct usb_line6_variax *variax, int a)
 }
 
 /*
-	Variax startup procedure.
-	This is a sequence of functions with special requirements (e.g., must
-	not run immediately after initialization, must not run in interrupt
-	context). After the last one has finished, the device is ready to use.
-*/
+ * Variax startup procedure.
+ * This is a sequence of functions with special requirements (e.g., must
+ * not run immediately after initialization, must not run in interrupt
+ * context). After the last one has finished, the device is ready to use.
+ */
 
 static void variax_startup1(struct usb_line6_variax *variax)
 {
@@ -171,8 +171,8 @@ static void variax_startup6(struct work_struct *work)
 }
 
 /*
-	Process a completely received message.
-*/
+ * Process a completely received message.
+ */
 static void line6_variax_process_message(struct usb_line6 *line6)
 {
 	struct usb_line6_variax *variax = (struct usb_line6_variax *) line6;
@@ -197,8 +197,8 @@ static void line6_variax_process_message(struct usb_line6 *line6)
 }
 
 /*
-	Variax destructor.
-*/
+ * Variax destructor.
+ */
 static void line6_variax_disconnect(struct usb_line6 *line6)
 {
 	struct usb_line6_variax *variax = (struct usb_line6_variax *)line6;
@@ -211,8 +211,8 @@ static void line6_variax_disconnect(struct usb_line6 *line6)
 }
 
 /*
-	 Try to init workbench device.
-*/
+ * Try to init workbench device.
+ */
 static int variax_init(struct usb_line6 *line6,
 		       const struct usb_device_id *id)
 {
@@ -280,9 +280,8 @@ static const struct line6_properties variax_properties_table[] = {
 };
 
 /*
-	Probe USB device.
-*/
+ * Probe USB device.
+ */
 static int variax_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {
--
2.7.4

[PATCH 2/3] sound/line6: unsigned -> unsigned int

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org

This patch replaces all occurrences of 'unsigned' in sound/usb/line6 with
'unsigned int'.

Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Signed-off-by: Daniel Graefe <daniel.graefe@fau.de>
---
 sound/usb/line6/driver.c | 10 +++++-----
 sound/usb/line6/driver.h |  8 ++++----
 sound/usb/line6/pcm.c    |  4 ++--
 sound/usb/line6/pcm.h    |  6 +++---
 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index df7e761..fd176ef 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -346,13 +346,13 @@ static void line6_data_received(struct urb *urb)
 /*
  * Read data from device.
  */
-int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
-		    unsigned datalen)
+int line6_read_data(struct usb_line6 *line6, unsigned int address, void *data,
+		    unsigned int datalen)
 {
 	struct usb_device *usbdev = line6->usbdev;
 	int ret;
 	unsigned char len;
-	unsigned count;
+	unsigned int count;
 
 	if (address > 0xffff || datalen > 0xff)
 		return -EINVAL;
@@ -417,8 +417,8 @@ EXPORT_SYMBOL_GPL(line6_read_data);
 /*
  * Write data to device.
  */
-int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
-		     unsigned datalen)
+int line6_write_data(struct usb_line6 *line6, unsigned int address, void *data,
+		     unsigned int datalen)
 {
 	struct usb_device *usbdev = line6->usbdev;
 	int ret;
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
index b307944..1dfb6de 100644
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -187,8 +187,8 @@ struct usb_line6 {
 
 extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1,
 				      int code2, int size);
-extern int line6_read_data(struct usb_line6 *line6, unsigned address,
-			   void *data, unsigned datalen);
+extern int line6_read_data(struct usb_line6 *line6, unsigned int address,
+			   void *data, unsigned int datalen);
 extern int line6_read_serial_number(struct usb_line6 *line6,
 				    u32 *serial_number);
 extern int line6_send_raw_message_async(struct usb_line6 *line6,
@@ -200,8 +200,8 @@ extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
 extern void line6_start_timer(struct timer_list *timer, unsigned long msecs,
 			      void (*function)(struct timer_list *t));
 extern int line6_version_request_async(struct usb_line6 *line6);
-extern int line6_write_data(struct usb_line6 *line6, unsigned address,
-			    void *data, unsigned datalen);
+extern int line6_write_data(struct usb_line6 *line6, unsigned int address,
+			    void *data, unsigned int datalen);
 
 int line6_probe(struct usb_interface *interface,
 		const struct usb_device_id *id,
diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
index 20a2da3..c4d698c 100644
--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -529,8 +529,8 @@ int line6_init_pcm(struct usb_line6 *line6,
 		   struct line6_pcm_properties *properties)
 {
 	int i, err;
-	unsigned ep_read = line6->properties->ep_audio_r;
-	unsigned ep_write = line6->properties->ep_audio_w;
+	unsigned int ep_read = line6->properties->ep_audio_r;
+	unsigned int ep_write = line6->properties->ep_audio_w;
 	struct snd_pcm *pcm;
 	struct snd_line6_pcm *line6pcm;
 
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h
index acef244..cd1da40 100644
--- a/sound/usb/line6/pcm.h
+++ b/sound/usb/line6/pcm.h
@@ -104,13 +104,13 @@ struct line6_pcm_stream {
 	/* Count processed bytes;
 	 * This is modulo period size (to determine when a period is finished).
 	 */
-	unsigned bytes;
+	unsigned int bytes;
 
 	/* Counter to create desired sample rate */
-	unsigned count;
+	unsigned int count;
 
 	/* period size in bytes */
-	unsigned period;
+	unsigned int period;
 
 	/* Processed frame position in the buffer;
 	 * The contents of the ring buffer have been consumed by the USB
-- 
2.7.4

[PATCH 2/3] sound/line6: unsigned -> unsigned int

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org

This patch replaces all occurrences of 'unsigned' in sound/usb/line6 with
'unsigned int'.

Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Signed-off-by: Daniel Graefe <daniel.graefe@fau.de>
---
 sound/usb/line6/driver.c | 10 +++++-----
 sound/usb/line6/driver.h |  8 ++++----
 sound/usb/line6/pcm.c    |  4 ++--
 sound/usb/line6/pcm.h    |  6 +++---
 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index df7e761..fd176ef 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -346,13 +346,13 @@ static void line6_data_received(struct urb *urb)
 /*
  * Read data from device.
  */
-int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
-		    unsigned datalen)
+int line6_read_data(struct usb_line6 *line6, unsigned int address, void *data,
+		    unsigned int datalen)
 {
 	struct usb_device *usbdev = line6->usbdev;
 	int ret;
 	unsigned char len;
-	unsigned count;
+	unsigned int count;
 
 	if (address > 0xffff || datalen > 0xff)
 		return -EINVAL;
@@ -417,8 +417,8 @@ EXPORT_SYMBOL_GPL(line6_read_data);
 /*
  * Write data to device.
  */
-int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
-		     unsigned datalen)
+int line6_write_data(struct usb_line6 *line6, unsigned int address, void *data,
+		     unsigned int datalen)
 {
 	struct usb_device *usbdev = line6->usbdev;
 	int ret;
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
index b307944..1dfb6de 100644
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -187,8 +187,8 @@ struct usb_line6 {
 
 extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1,
 				      int code2, int size);
-extern int line6_read_data(struct usb_line6 *line6, unsigned address,
-			   void *data, unsigned datalen);
+extern int line6_read_data(struct usb_line6 *line6, unsigned int address,
+			   void *data, unsigned int datalen);
 extern int line6_read_serial_number(struct usb_line6 *line6,
 				    u32 *serial_number);
 extern int line6_send_raw_message_async(struct usb_line6 *line6,
@@ -200,8 +200,8 @@ extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
 extern void line6_start_timer(struct timer_list *timer, unsigned long msecs,
 			      void (*function)(struct timer_list *t));
 extern int line6_version_request_async(struct usb_line6 *line6);
-extern int line6_write_data(struct usb_line6 *line6, unsigned address,
-			    void *data, unsigned datalen);
+extern int line6_write_data(struct usb_line6 *line6, unsigned int address,
+			    void *data, unsigned int datalen);
 
 int line6_probe(struct usb_interface *interface,
 		const struct usb_device_id *id,
diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
index 20a2da3..c4d698c 100644
--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -529,8 +529,8 @@ int line6_init_pcm(struct usb_line6 *line6,
 		   struct line6_pcm_properties *properties)
 {
 	int i, err;
-	unsigned ep_read = line6->properties->ep_audio_r;
-	unsigned ep_write = line6->properties->ep_audio_w;
+	unsigned int ep_read = line6->properties->ep_audio_r;
+	unsigned int ep_write = line6->properties->ep_audio_w;
 	struct snd_pcm *pcm;
 	struct snd_line6_pcm *line6pcm;
 
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h
index acef244..cd1da40 100644
--- a/sound/usb/line6/pcm.h
+++ b/sound/usb/line6/pcm.h
@@ -104,13 +104,13 @@ struct line6_pcm_stream {
 	/* Count processed bytes;
 	 * This is modulo period size (to determine when a period is finished).
 	 */
-	unsigned bytes;
+	unsigned int bytes;
 
 	/* Counter to create desired sample rate */
-	unsigned count;
+	unsigned int count;
 
 	/* period size in bytes */
-	unsigned period;
+	unsigned int period;
 
 	/* Processed frame position in the buffer;
 	 * The contents of the ring buffer have been consumed by the USB
-- 
2.7.4

[PATCH 3/3] sound/line6: add newline after declarations

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org

This patch adds newlines after variable declarations in sound/usb/line6.

Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Signed-off-by: Daniel Graefe <daniel.graefe@fau.de>
---
 sound/usb/line6/driver.h   | 1 +
 sound/usb/line6/playback.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
index 1dfb6de..4dff70c 100644
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -174,6 +174,7 @@ struct usb_line6 {
 		struct mutex read_lock;
 		wait_queue_head_t wait_queue;
 		unsigned int active:1;
+
 		STRUCT_KFIFO_REC_2(LINE6_BUFSIZE_LISTEN * LINE6_RAW_MESSAGES_MAXCOUNT)
 			fifo;
 	} messages;
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
index 674502c..1e16a5c 100644
--- a/sound/usb/line6/playback.c
+++ b/sound/usb/line6/playback.c
@@ -39,6 +39,7 @@ static void change_volume(struct urb *urb_out, int volume[],
 		for (; p < buf_end; ++p) {
 			short pv = le16_to_cpu(*p);
 			int val = (pv * volume[chn & 1]) >> 8;
+
 			pv = clamp(val, -0x8000, 0x7fff);
 			*p = cpu_to_le16(pv);
 			++chn;
@@ -126,6 +127,7 @@ static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
 			short pov = le16_to_cpu(*po);
 			short piv = le16_to_cpu(*pi);
 			int val = pov + ((piv * volume) >> 8);
+
 			pov = clamp(val, -0x8000, 0x7fff);
 			*po = cpu_to_le16(pov);
 		}
-- 
2.7.4

[PATCH 3/3] sound/line6: add newline after declarations

[Roman Sommer]

CC: Jaroslav Kysela <perex@perex.cz>
CC: Takashi Iwai <tiwai@suse.com>
CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
CC: Kees Cook <keescook@chromium.org>
CC: Kate Stewart <kstewart@linuxfoundation.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
CC: Bhumika Goyal <bhumirks@gmail.com>
CC: Philippe Ombredanne <pombredanne@nexb.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: alsa-devel@alsa-project.org
CC: linux-kernel@vger.kernel.org

This patch adds newlines after variable declarations in sound/usb/line6.

Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Signed-off-by: Daniel Graefe <daniel.graefe@fau.de>
---
 sound/usb/line6/driver.h   | 1 +
 sound/usb/line6/playback.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h
index 1dfb6de..4dff70c 100644
--- a/sound/usb/line6/driver.h
+++ b/sound/usb/line6/driver.h
@@ -174,6 +174,7 @@ struct usb_line6 {
 		struct mutex read_lock;
 		wait_queue_head_t wait_queue;
 		unsigned int active:1;
+
 		STRUCT_KFIFO_REC_2(LINE6_BUFSIZE_LISTEN * LINE6_RAW_MESSAGES_MAXCOUNT)
 			fifo;
 	} messages;
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
index 674502c..1e16a5c 100644
--- a/sound/usb/line6/playback.c
+++ b/sound/usb/line6/playback.c
@@ -39,6 +39,7 @@ static void change_volume(struct urb *urb_out, int volume[],
 		for (; p < buf_end; ++p) {
 			short pv = le16_to_cpu(*p);
 			int val = (pv * volume[chn & 1]) >> 8;
+
 			pv = clamp(val, -0x8000, 0x7fff);
 			*p = cpu_to_le16(pv);
 			++chn;
@@ -126,6 +127,7 @@ static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
 			short pov = le16_to_cpu(*po);
 			short piv = le16_to_cpu(*pi);
 			int val = pov + ((piv * volume) >> 8);
+
 			pov = clamp(val, -0x8000, 0x7fff);
 			*po = cpu_to_le16(pov);
 		}
-- 
2.7.4

Re: [PATCH 0/3] sound/usb/line6: fix some styling issues

[Takashi Iwai]

On Mon, 18 Jun 2018 12:29:36 +0200,
Roman Sommer wrote:
> 
> CC: Jaroslav Kysela <perex@perex.cz>
> CC: Takashi Iwai <tiwai@suse.com>
> CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
> CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
> CC: Kees Cook <keescook@chromium.org>
> CC: Kate Stewart <kstewart@linuxfoundation.org>
> CC: Thomas Gleixner <tglx@linutronix.de>
> CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
> CC: Bhumika Goyal <bhumirks@gmail.com>
> CC: Philippe Ombredanne <pombredanne@nexb.com>
> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> CC: alsa-devel@alsa-project.org
> CC: linux-kernel@vger.kernel.org
> 
> 
> This patchseries addresses some styling issues in sound/usb/line6 found by
> checkpatch.

Are you working further on this driver to fix any real bugs (or
implements something new), or it's an action "just because checkpatch
tells"?  I'd take such cleanup patches only for the former case.


thanks,

Takashi


> 
> Roman Sommer (3):
>   sound/line6: checkpatch: fix block comment style
>   sound/line6: unsigned -> unsigned int
>   sound/line6: add newline after declarations
> 
>  sound/usb/line6/capture.c  |  20 ++++-----
>  sound/usb/line6/driver.c   | 110 ++++++++++++++++++++++-----------------------
>  sound/usb/line6/driver.h   |  33 +++++++-------
>  sound/usb/line6/midi.c     |  24 +++++-----
>  sound/usb/line6/midibuf.c  |   6 +--
>  sound/usb/line6/pcm.c      |  26 +++++------
>  sound/usb/line6/pcm.h      |  74 +++++++++++++++---------------
>  sound/usb/line6/playback.c |  36 ++++++++-------
>  sound/usb/line6/pod.c      |  60 ++++++++++++-------------
>  sound/usb/line6/podhd.c    |   8 ++--
>  sound/usb/line6/toneport.c |  30 ++++++-------
>  sound/usb/line6/variax.c   |  40 ++++++++---------
>  12 files changed, 235 insertions(+), 232 deletions(-)
> 
> -- 
> 2.7.4
> 
> 

Re: [PATCH 1/3] sound/line6: checkpatch: fix block comment style

[Greg Kroah-Hartman]

On Mon, Jun 18, 2018 at 12:29:37PM +0200, Roman Sommer wrote:
> CC: Jaroslav Kysela <perex@perex.cz>
> CC: Takashi Iwai <tiwai@suse.com>
> CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
> CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
> CC: Kees Cook <keescook@chromium.org>
> CC: Kate Stewart <kstewart@linuxfoundation.org>
> CC: Thomas Gleixner <tglx@linutronix.de>
> CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
> CC: Bhumika Goyal <bhumirks@gmail.com>
> CC: Philippe Ombredanne <pombredanne@nexb.com>
> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> CC: alsa-devel@alsa-project.org
> CC: linux-kernel@vger.kernel.org
> 
> This patch fixed the style of multiline comments in sound/usb/line6.

Why is all of those cc: lines in the changelog body?

Very odd...

greg k-h

Re: [PATCH 1/3] sound/line6: checkpatch: fix block comment style

[Greg Kroah-Hartman]

On Mon, Jun 18, 2018 at 12:29:37PM +0200, Roman Sommer wrote:
> CC: Jaroslav Kysela <perex@perex.cz>
> CC: Takashi Iwai <tiwai@suse.com>
> CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
> CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
> CC: Kees Cook <keescook@chromium.org>
> CC: Kate Stewart <kstewart@linuxfoundation.org>
> CC: Thomas Gleixner <tglx@linutronix.de>
> CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
> CC: Bhumika Goyal <bhumirks@gmail.com>
> CC: Philippe Ombredanne <pombredanne@nexb.com>
> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> CC: alsa-devel@alsa-project.org
> CC: linux-kernel@vger.kernel.org
> 
> This patch fixed the style of multiline comments in sound/usb/line6.

Why is all of those cc: lines in the changelog body?

Very odd...

greg k-h

Re: [PATCH 1/3] sound/line6: checkpatch: fix block comment style

[Sommer, Roman]

On 2018-06-18 13:21, Greg Kroah-Hartman wrote:
> On Mon, Jun 18, 2018 at 12:29:37PM +0200, Roman Sommer wrote:
>> CC: Jaroslav Kysela <perex@perex.cz>
>> CC: Takashi Iwai <tiwai@suse.com>
>> CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
>> CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
>> CC: Kees Cook <keescook@chromium.org>
>> CC: Kate Stewart <kstewart@linuxfoundation.org>
>> CC: Thomas Gleixner <tglx@linutronix.de>
>> CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
>> CC: Bhumika Goyal <bhumirks@gmail.com>
>> CC: Philippe Ombredanne <pombredanne@nexb.com>
>> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> CC: alsa-devel@alsa-project.org
>> CC: linux-kernel@vger.kernel.org
>> 
>> This patch fixed the style of multiline comments in sound/usb/line6.
> 
> Why is all of those cc: lines in the changelog body?
> 
> Very odd...
> 
> greg k-h

Hi Greg,

Sorry for the mess-up here, they were meant for the header only.

I used a newline to group people in the patches which I now know I 
should
not do.


Roman

Re: [PATCH 0/3] sound/usb/line6: fix some styling issues

[Sommer, Roman]

On 2018-06-18 12:39, Takashi Iwai wrote:
> On Mon, 18 Jun 2018 12:29:36 +0200,
> Roman Sommer wrote:
>> 
>> CC: Jaroslav Kysela <perex@perex.cz>
>> CC: Takashi Iwai <tiwai@suse.com>
>> CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
>> CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
>> CC: Kees Cook <keescook@chromium.org>
>> CC: Kate Stewart <kstewart@linuxfoundation.org>
>> CC: Thomas Gleixner <tglx@linutronix.de>
>> CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
>> CC: Bhumika Goyal <bhumirks@gmail.com>
>> CC: Philippe Ombredanne <pombredanne@nexb.com>
>> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> CC: alsa-devel@alsa-project.org
>> CC: linux-kernel@vger.kernel.org
>> 
>> 
>> This patchseries addresses some styling issues in sound/usb/line6 
>> found by
>> checkpatch.
> 
> Are you working further on this driver to fix any real bugs (or
> implements something new), or it's an action "just because checkpatch
> tells"?  I'd take such cleanup patches only for the former case.
> 

Hi Takashi,

I do intend to work on a few issues as I have some Line6 USB devices 
that
don't work as expected (or at all).
But for now this is just a cleanup patch and I don't want to promise
anything at this point.
Still my interest to use those devices is a strong
motivator.

I'd be glad if you would consider accepting the patch anyway.


Cheers,
Roman

Re: [PATCH 0/3] sound/usb/line6: fix some styling issues

[Takashi Iwai]

On Mon, 18 Jun 2018 13:57:26 +0200,
Sommer, Roman wrote:
> 
> On 2018-06-18 12:39, Takashi Iwai wrote:
> > On Mon, 18 Jun 2018 12:29:36 +0200,
> > Roman Sommer wrote:
> >>
> >> CC: Jaroslav Kysela <perex@perex.cz>
> >> CC: Takashi Iwai <tiwai@suse.com>
> >> CC: Takashi Sakamoto <o-takashi@sakamocchi.jp>
> >> CC: "Hans P. Möller Ebner" <hmoller@uc.cl>
> >> CC: Kees Cook <keescook@chromium.org>
> >> CC: Kate Stewart <kstewart@linuxfoundation.org>
> >> CC: Thomas Gleixner <tglx@linutronix.de>
> >> CC: "Fabián Inostroza" <soulsonceonfire@gmail.com>
> >> CC: Bhumika Goyal <bhumirks@gmail.com>
> >> CC: Philippe Ombredanne <pombredanne@nexb.com>
> >> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >> CC: alsa-devel@alsa-project.org
> >> CC: linux-kernel@vger.kernel.org
> >>
> >>
> >> This patchseries addresses some styling issues in sound/usb/line6
> >> found by
> >> checkpatch.
> >
> > Are you working further on this driver to fix any real bugs (or
> > implements something new), or it's an action "just because checkpatch
> > tells"?  I'd take such cleanup patches only for the former case.
> >
> 
> Hi Takashi,
> 
> I do intend to work on a few issues as I have some Line6 USB devices
> that
> don't work as expected (or at all).
> But for now this is just a cleanup patch and I don't want to promise
> anything at this point.

Well, then I'd wait for what something really matters.  If something
comes up, I'd happily apply together with cleanups.


thanks,

Takashi

> Still my interest to use those devices is a strong
> motivator.
> 
> I'd be glad if you would consider accepting the patch anyway.
> 
> 
> Cheers,
> Roman
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel