[PATCH 0/4] enable meson support for aesni_gcm, aesni_mb, kasumi and zuc

[PATCH 0/4] enable meson support for aesni_gcm, aesni_mb, kasumi and zuc

[Hari Kumar Vemula]

1/4: enablement of aesni_gcm pmd in meson
2/4: enablement of aesni_mb pmd in meson
3/4: enablement of kasumi pmd enable in meson
4/4: enablement of zuc pmd enable in meson

Hari Kumar Vemula (4):
  driver/crypto: enable meson support for the aesni gcm
  drivers/crypto: enable meson support for the aesni mb
  drivers/crypto: enable meson support for the kasumi
  drivers/crypto: enable meson support for the zuc

 drivers/crypto/aesni_gcm/meson.build | 17 +++++++++++++++++
 drivers/crypto/aesni_mb/meson.build  | 16 ++++++++++++++++
 drivers/crypto/kasumi/meson.build    | 18 ++++++++++++++++++
 drivers/crypto/meson.build           |  4 ++--
 drivers/crypto/zuc/meson.build       | 18 ++++++++++++++++++
 meson_options.txt                    |  6 ++++++
 6 files changed, 77 insertions(+), 2 deletions(-)
 create mode 100644 drivers/crypto/aesni_gcm/meson.build
 create mode 100644 drivers/crypto/aesni_mb/meson.build
 create mode 100644 drivers/crypto/kasumi/meson.build
 create mode 100644 drivers/crypto/zuc/meson.build

-- 
2.13.6

[PATCH 1/4] driver/crypto: enable meson support for the aesni gcm

[Hari Kumar Vemula]

Added new meson.build files for aesni_gcm
Exported dependency library path through meson_options.txt file

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/aesni_gcm/meson.build | 17 +++++++++++++++++
 drivers/crypto/meson.build           |  2 +-
 meson_options.txt                    |  2 ++
 3 files changed, 20 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/aesni_gcm/meson.build

diff --git a/drivers/crypto/aesni_gcm/meson.build b/drivers/crypto/aesni_gcm/meson.build
new file mode 100644
index 000000000..a84c792c5
--- /dev/null
+++ b/drivers/crypto/aesni_gcm/meson.build
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+path = get_option('lib_IPSec_MB')
+lib_dir = path + '/lib'
+
+lib = cc.find_library('IPSec_MB', required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+endif
+
+sources = files('aesni_gcm_pmd.c', 'aesni_gcm_pmd_ops.c')
+
+deps += ['bus_vdev']
+
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 6ed853b7a..7e14cbba0 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
+drivers = ['aesni_gcm', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
 	'null', 'openssl', 'qat', 'scheduler', 'virtio']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
diff --git a/meson_options.txt b/meson_options.txt
index d38ba56e2..8c75826c1 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -24,3 +24,5 @@ option('use_hpet', type: 'boolean', value: false,
 	description: 'use HPET timer in EAL')
 option('tests', type: 'boolean', value: true,
 	description: 'build unit tests')
+option('lib_IPSec_MB', type: 'string', value: '',
+	description: 'path to the IPSec_MB library installation directory')
-- 
2.13.6

Re: [PATCH 1/4] driver/crypto: enable meson support for the aesni gcm

[Bruce Richardson]

On Sat, Sep 29, 2018 at 01:00:58PM +0100, Hari Kumar Vemula wrote:
> Added new meson.build files for aesni_gcm
> Exported dependency library path through meson_options.txt file
> 
> Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
> ---
>  drivers/crypto/aesni_gcm/meson.build | 17 +++++++++++++++++
>  drivers/crypto/meson.build           |  2 +-
>  meson_options.txt                    |  2 ++
>  3 files changed, 20 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/crypto/aesni_gcm/meson.build
> 
> diff --git a/drivers/crypto/aesni_gcm/meson.build b/drivers/crypto/aesni_gcm/meson.build
> new file mode 100644
> index 000000000..a84c792c5
> --- /dev/null
> +++ b/drivers/crypto/aesni_gcm/meson.build
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: BSD-3-Clause
> +# Copyright(c) 2018 Intel Corporation
> +
> +path = get_option('lib_IPSec_MB')
> +lib_dir = path + '/lib'
> +

lib_dir doesn't seem to be used after being assigned, whcih means that
having the build option is unnecessary.

> +lib = cc.find_library('IPSec_MB', required: false)
> +if not lib.found()
> +	build = false
> +else
> +	ext_deps += lib
> +endif
> +
> +sources = files('aesni_gcm_pmd.c', 'aesni_gcm_pmd_ops.c')
> +
> +deps += ['bus_vdev']
> +

You don't seem to require any header file paths from the IPSec_MD library,
so even if you need the path for the lib, you can used LD_LIBRARY_PATH
environment variable to point to it rather than needing a build-time
option. I'd like to avoid adding unnecessary options, if possible.

> diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
> index 6ed853b7a..7e14cbba0 100644
> --- a/drivers/crypto/meson.build
> +++ b/drivers/crypto/meson.build
> @@ -1,7 +1,7 @@
>  # SPDX-License-Identifier: BSD-3-Clause
>  # Copyright(c) 2017 Intel Corporation
>  
> -drivers = ['ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
> +drivers = ['aesni_gcm', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
>  	'null', 'openssl', 'qat', 'scheduler', 'virtio']
>  
>  std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
> diff --git a/meson_options.txt b/meson_options.txt
> index d38ba56e2..8c75826c1 100644
> --- a/meson_options.txt
> +++ b/meson_options.txt
> @@ -24,3 +24,5 @@ option('use_hpet', type: 'boolean', value: false,
>  	description: 'use HPET timer in EAL')
>  option('tests', type: 'boolean', value: true,
>  	description: 'build unit tests')
> +option('lib_IPSec_MB', type: 'string', value: '',
> +	description: 'path to the IPSec_MB library installation directory')
> -- 
> 2.13.6
> 

[PATCH 2/4] drivers/crypto: enable meson support for the aesni mb

[Hari Kumar Vemula]

Added new meson.build file for aesni_mb
Exported dependency library path through meson_options.txt file

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/aesni_mb/meson.build | 16 ++++++++++++++++
 drivers/crypto/meson.build          |  2 +-
 2 files changed, 17 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/aesni_mb/meson.build

diff --git a/drivers/crypto/aesni_mb/meson.build b/drivers/crypto/aesni_mb/meson.build
new file mode 100644
index 000000000..000c7adb4
--- /dev/null
+++ b/drivers/crypto/aesni_mb/meson.build
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+path = get_option('lib_IPSec_MB')
+lib_dir = path + '/lib'
+
+lib = cc.find_library('IPSec_MB', required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+endif
+
+sources = files('rte_aesni_mb_pmd.c', 'rte_aesni_mb_pmd_ops.c')
+
+deps += ['bus_vdev']
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 7e14cbba0..ab68c2751 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['aesni_gcm', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
+drivers = ['aesni_gcm',  'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
 	'null', 'openssl', 'qat', 'scheduler', 'virtio']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-- 
2.13.6

[PATCH 3/4] drivers/crypto: enable meson support for the kasumi

[Hari Kumar Vemula]

Added new meson.build file for KASUMI
Exported dependency library path through meson_options.txt file

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/kasumi/meson.build | 18 ++++++++++++++++++
 drivers/crypto/meson.build        |  2 +-
 meson_options.txt                 |  2 ++
 3 files changed, 21 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/kasumi/meson.build

diff --git a/drivers/crypto/kasumi/meson.build b/drivers/crypto/kasumi/meson.build
new file mode 100644
index 000000000..b65de65cc
--- /dev/null
+++ b/drivers/crypto/kasumi/meson.build
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+path = get_option('libsso_kasumi_dir')
+lib_dir = path + '/build'
+inc_dir = path + '/include'
+
+lib = cc.find_library('libsso_kasumi', dirs: lib_dir, required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+	includes += include_directories(inc_dir)
+endif
+
+sources = files('rte_kasumi_pmd.c', 'rte_kasumi_pmd_ops.c')
+
+deps += ['bus_vdev']
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index ab68c2751..4ed87c367 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['aesni_gcm',  'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
+drivers = ['aesni_gcm',  'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'kasumi', 'mvsam',
 	'null', 'openssl', 'qat', 'scheduler', 'virtio']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
diff --git a/meson_options.txt b/meson_options.txt
index 8c75826c1..782213477 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -26,3 +26,5 @@ option('tests', type: 'boolean', value: true,
 	description: 'build unit tests')
 option('lib_IPSec_MB', type: 'string', value: '',
 	description: 'path to the IPSec_MB library installation directory')
+option('libsso_kasumi_dir', type: 'string', value: '',
+	description: 'path to the KASUMI library installation directory')
-- 
2.13.6

[PATCH 4/4] drivers/crypto: enable meson support for the zuc

[Hari Kumar Vemula]

Added new meson.build file for ZUC
Exported dependency library path through meson_options.txt file

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/meson.build     |  2 +-
 drivers/crypto/zuc/meson.build | 18 ++++++++++++++++++
 meson_options.txt              |  2 ++
 3 files changed, 21 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/zuc/meson.build

diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 4ed87c367..b45049ce3 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -2,7 +2,7 @@
 # Copyright(c) 2017 Intel Corporation
 
 drivers = ['aesni_gcm',  'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'kasumi', 'mvsam',
-	'null', 'openssl', 'qat', 'scheduler', 'virtio']
+	'null', 'openssl', 'qat', 'scheduler', 'virtio', 'zuc']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
diff --git a/drivers/crypto/zuc/meson.build b/drivers/crypto/zuc/meson.build
new file mode 100644
index 000000000..4fa5d9b8c
--- /dev/null
+++ b/drivers/crypto/zuc/meson.build
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+path = get_option('libsso_zuc_dir')
+lib_dir = path + '/build'
+inc_dir = path + '/include'
+
+lib = cc.find_library('libsso_zuc', dirs: lib_dir, required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+	includes += include_directories(inc_dir)
+endif
+
+sources = files('rte_zuc_pmd.c', 'rte_zuc_pmd_ops.c')
+
+deps += ['bus_vdev']
diff --git a/meson_options.txt b/meson_options.txt
index 782213477..842b6c6de 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -28,3 +28,5 @@ option('lib_IPSec_MB', type: 'string', value: '',
 	description: 'path to the IPSec_MB library installation directory')
 option('libsso_kasumi_dir', type: 'string', value: '',
 	description: 'path to the KASUMI library installation directory')
+option('libsso_zuc_dir', type: 'string', value: '',
+	description: 'path to the ZUC library installation directory')
-- 
2.13.6

Re: [PATCH 0/4] enable meson support for aesni_gcm, aesni_mb, kasumi and zuc

[Luca Boccassi]

On Sat, 2018-09-29 at 13:00 +0100, Hari Kumar Vemula wrote:
> 1/4: enablement of aesni_gcm pmd in meson
> 2/4: enablement of aesni_mb pmd in meson
> 3/4: enablement of kasumi pmd enable in meson
> 4/4: enablement of zuc pmd enable in meson
> 
> Hari Kumar Vemula (4):
>   driver/crypto: enable meson support for the aesni gcm
>   drivers/crypto: enable meson support for the aesni mb
>   drivers/crypto: enable meson support for the kasumi
>   drivers/crypto: enable meson support for the zuc
> 
>  drivers/crypto/aesni_gcm/meson.build | 17 +++++++++++++++++
>  drivers/crypto/aesni_mb/meson.build  | 16 ++++++++++++++++
>  drivers/crypto/kasumi/meson.build    | 18 ++++++++++++++++++
>  drivers/crypto/meson.build           |  4 ++--
>  drivers/crypto/zuc/meson.build       | 18 ++++++++++++++++++
>  meson_options.txt                    |  6 ++++++
>  6 files changed, 77 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/crypto/aesni_gcm/meson.build
>  create mode 100644 drivers/crypto/aesni_mb/meson.build
>  create mode 100644 drivers/crypto/kasumi/meson.build
>  create mode 100644 drivers/crypto/zuc/meson.build

Hi,

With Meson we want to reduce the large number of build-time options.
For dependencies, I don't think it's necessary to have a separate
option to pass the library path.

The preferred option would be for the dependency to have a pkg-config
file which sets the necessary flags. If that's not installed in the
standard path, the PKG_CONFIG_PATH environment variable can be set to
add custom paths.

If a dependency does not have a pkg-config file (if you control it
would be a good time to add it :-) ), then you can set the path to the
shared object with something like: LD_FLAGS=-L/path/to/lib/ and Meson
will use that automatically (and CFLAGS=-I/path/to/headers/ if
necessary as well).

-- 
Kind regards,
Luca Boccassi

Re: [PATCH 0/4] enable meson support for aesni_gcm, aesni_mb, kasumi and zuc

[Bruce Richardson]

On Sun, Sep 30, 2018 at 11:01:38AM +0100, Luca Boccassi wrote:
> On Sat, 2018-09-29 at 13:00 +0100, Hari Kumar Vemula wrote:
> > 1/4: enablement of aesni_gcm pmd in meson 2/4: enablement of aesni_mb
> > pmd in meson 3/4: enablement of kasumi pmd enable in meson 4/4:
> > enablement of zuc pmd enable in meson
> > 
> > Hari Kumar Vemula (4):   driver/crypto: enable meson support for the
> > aesni gcm   drivers/crypto: enable meson support for the aesni mb  
> > drivers/crypto: enable meson support for the kasumi   drivers/crypto:
> > enable meson support for the zuc
> > 
> >  drivers/crypto/aesni_gcm/meson.build | 17 +++++++++++++++++
> >  drivers/crypto/aesni_mb/meson.build  | 16 ++++++++++++++++
> >  drivers/crypto/kasumi/meson.build    | 18 ++++++++++++++++++
> >  drivers/crypto/meson.build           |  4 ++--
> >  drivers/crypto/zuc/meson.build       | 18 ++++++++++++++++++
> >  meson_options.txt                    |  6 ++++++  6 files changed, 77
> > insertions(+), 2 deletions(-)  create mode 100644
> > drivers/crypto/aesni_gcm/meson.build  create mode 100644
> > drivers/crypto/aesni_mb/meson.build  create mode 100644
> > drivers/crypto/kasumi/meson.build  create mode 100644
> > drivers/crypto/zuc/meson.build
> 
> Hi,
> 
> With Meson we want to reduce the large number of build-time options.  For
> dependencies, I don't think it's necessary to have a separate option to
> pass the library path.
> 
> The preferred option would be for the dependency to have a pkg-config
> file which sets the necessary flags. If that's not installed in the
> standard path, the PKG_CONFIG_PATH environment variable can be set to add
> custom paths.
> 
> If a dependency does not have a pkg-config file (if you control it would
> be a good time to add it :-) ), then you can set the path to the shared
> object with something like: LD_FLAGS=-L/path/to/lib/ and Meson will use
> that automatically (and CFLAGS=-I/path/to/headers/ if necessary as well).
> 
For completeness: third option is to have the libraries on which you depend
install themselves in /usr/local as normal for additional software, which
means that they should still be found in most cases without either
pkg-config files or extra LD/CFLAGS.

/Bruce

[PATCH v2 0/4] enable meson support for aesni_gcm, aesni_mb, kasumi and zuc

[Hari Kumar Vemula]

1/4: enablement of aesni_gcm pmd in meson
2/4: enablement of aesni_mb pmd in meson
3/4: enablement of kasumi pmd enable in meson
4/4: enablement of zuc pmd enable in meson

--
v2: Removed lib dependancy options from  meson_option.txt file
--


Hari Kumar Vemula (4):
  drivers/crypto: enable meson support for the aesni gcm
  drivers/crypto: enable meson support for the aesni mb
  drivers/crypto: enable meson support for the kasumi
  drivers/crypto: enable meson support for the zuc

 drivers/crypto/aesni_gcm/meson.build | 13 +++++++++++++
 drivers/crypto/aesni_mb/meson.build  | 12 ++++++++++++
 drivers/crypto/kasumi/meson.build    | 12 ++++++++++++
 drivers/crypto/meson.build           |  4 ++--
 drivers/crypto/zuc/meson.build       | 12 ++++++++++++
 5 files changed, 51 insertions(+), 2 deletions(-)
 create mode 100644 drivers/crypto/aesni_gcm/meson.build
 create mode 100644 drivers/crypto/aesni_mb/meson.build
 create mode 100644 drivers/crypto/kasumi/meson.build
 create mode 100644 drivers/crypto/zuc/meson.build

-- 
2.13.6

Re: [PATCH v2 0/4] enable meson support for aesni_gcm, aesni_mb, kasumi and zuc

[Luca Boccassi]

On Fri, 2018-10-05 at 11:59 +0100, Hari Kumar Vemula wrote:
> 1/4: enablement of aesni_gcm pmd in meson
> 2/4: enablement of aesni_mb pmd in meson
> 3/4: enablement of kasumi pmd enable in meson
> 4/4: enablement of zuc pmd enable in meson
> 
> --
> v2: Removed lib dependancy options from  meson_option.txt file
> --
> 
> 
> Hari Kumar Vemula (4):
>   drivers/crypto: enable meson support for the aesni gcm
>   drivers/crypto: enable meson support for the aesni mb
>   drivers/crypto: enable meson support for the kasumi
>   drivers/crypto: enable meson support for the zuc
> 
>  drivers/crypto/aesni_gcm/meson.build | 13 +++++++++++++
>  drivers/crypto/aesni_mb/meson.build  | 12 ++++++++++++
>  drivers/crypto/kasumi/meson.build    | 12 ++++++++++++
>  drivers/crypto/meson.build           |  4 ++--
>  drivers/crypto/zuc/meson.build       | 12 ++++++++++++
>  5 files changed, 51 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/crypto/aesni_gcm/meson.build
>  create mode 100644 drivers/crypto/aesni_mb/meson.build
>  create mode 100644 drivers/crypto/kasumi/meson.build
>  create mode 100644 drivers/crypto/zuc/meson.build

Series-acked-by: Luca Boccassi <bluca@debian.org>

-- 
Kind regards,
Luca Boccassi

Re: [PATCH v2 0/4] enable meson support for aesni_gcm, aesni_mb, kasumi and zuc

[Akhil Goyal]

On 10/5/2018 4:43 PM, Luca Boccassi wrote:
> On Fri, 2018-10-05 at 11:59 +0100, Hari Kumar Vemula wrote:
>> 1/4: enablement of aesni_gcm pmd in meson
>> 2/4: enablement of aesni_mb pmd in meson
>> 3/4: enablement of kasumi pmd enable in meson
>> 4/4: enablement of zuc pmd enable in meson
>>
>> --
>> v2: Removed lib dependancy options from  meson_option.txt file
>> --
>>
>>
>> Hari Kumar Vemula (4):
>>    drivers/crypto: enable meson support for the aesni gcm
>>    drivers/crypto: enable meson support for the aesni mb
>>    drivers/crypto: enable meson support for the kasumi
>>    drivers/crypto: enable meson support for the zuc
>>
>>   drivers/crypto/aesni_gcm/meson.build | 13 +++++++++++++
>>   drivers/crypto/aesni_mb/meson.build  | 12 ++++++++++++
>>   drivers/crypto/kasumi/meson.build    | 12 ++++++++++++
>>   drivers/crypto/meson.build           |  4 ++--
>>   drivers/crypto/zuc/meson.build       | 12 ++++++++++++
>>   5 files changed, 51 insertions(+), 2 deletions(-)
>>   create mode 100644 drivers/crypto/aesni_gcm/meson.build
>>   create mode 100644 drivers/crypto/aesni_mb/meson.build
>>   create mode 100644 drivers/crypto/kasumi/meson.build
>>   create mode 100644 drivers/crypto/zuc/meson.build
> Series-acked-by: Luca Boccassi <bluca@debian.org>
>
rebased and applied to dpdk-next-crypto

modified the title of the patches as

crypto/zuc: enable meson build
crypto/kasumi: enable meson build
crypto/aesni_mb: enable meson build
crypto/aesni_gcm: enable meson build

Thanks

[PATCH v2 1/4] drivers/crypto: enable meson support for the aesni gcm

[Hari Kumar Vemula]

Added new meson.build files for aesni_gcm

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/aesni_gcm/meson.build | 13 +++++++++++++
 drivers/crypto/meson.build           |  2 +-
 2 files changed, 14 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/aesni_gcm/meson.build

diff --git a/drivers/crypto/aesni_gcm/meson.build b/drivers/crypto/aesni_gcm/meson.build
new file mode 100644
index 000000000..e64f8ce71
--- /dev/null
+++ b/drivers/crypto/aesni_gcm/meson.build
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+lib = cc.find_library('IPSec_MB', required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+endif
+
+sources = files('aesni_gcm_pmd.c', 'aesni_gcm_pmd_ops.c')
+deps += ['bus_vdev']
+
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 6ed853b7a..7e14cbba0 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
+drivers = ['aesni_gcm', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
 	'null', 'openssl', 'qat', 'scheduler', 'virtio']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-- 
2.13.6

[PATCH v2 2/4] drivers/crypto: enable meson support for the aesni mb

[Hari Kumar Vemula]

 Added new meson.build file for aesni_mb

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/aesni_mb/meson.build | 12 ++++++++++++
 drivers/crypto/meson.build          |  2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/aesni_mb/meson.build

diff --git a/drivers/crypto/aesni_mb/meson.build b/drivers/crypto/aesni_mb/meson.build
new file mode 100644
index 000000000..aae0995e5
--- /dev/null
+++ b/drivers/crypto/aesni_mb/meson.build
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+lib = cc.find_library('IPSec_MB', required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+endif
+
+sources = files('rte_aesni_mb_pmd.c', 'rte_aesni_mb_pmd_ops.c')
+deps += ['bus_vdev']
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 7e14cbba0..1de5cfa35 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['aesni_gcm', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
+drivers = ['aesni_gcm', 'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
 	'null', 'openssl', 'qat', 'scheduler', 'virtio']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-- 
2.13.6

[PATCH v2 3/4] drivers/crypto: enable meson support for the kasumi

[Hari Kumar Vemula]

Added new meson.build file for KASUMI

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/kasumi/meson.build | 12 ++++++++++++
 drivers/crypto/meson.build        |  2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/kasumi/meson.build

diff --git a/drivers/crypto/kasumi/meson.build b/drivers/crypto/kasumi/meson.build
new file mode 100644
index 000000000..a09b0e251
--- /dev/null
+++ b/drivers/crypto/kasumi/meson.build
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+lib = cc.find_library('libsso_kasumi', required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+endif
+
+sources = files('rte_kasumi_pmd.c', 'rte_kasumi_pmd_ops.c')
+deps += ['bus_vdev']
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 1de5cfa35..228729da1 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-drivers = ['aesni_gcm', 'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'mvsam',
+drivers = ['aesni_gcm', 'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'kasumi', 'mvsam',
 	'null', 'openssl', 'qat', 'scheduler', 'virtio']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-- 
2.13.6

[PATCH v2 4/4] drivers/crypto: enable meson support for the zuc

[Hari Kumar Vemula]

Added new meson.build file for ZUC

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
---
 drivers/crypto/meson.build     |  2 +-
 drivers/crypto/zuc/meson.build | 12 ++++++++++++
 2 files changed, 13 insertions(+), 1 deletion(-)
 create mode 100644 drivers/crypto/zuc/meson.build

diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index 228729da1..85ab80557 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -2,7 +2,7 @@
 # Copyright(c) 2017 Intel Corporation
 
 drivers = ['aesni_gcm', 'aesni_mb', 'ccp', 'dpaa_sec', 'dpaa2_sec', 'kasumi', 'mvsam',
-	'null', 'openssl', 'qat', 'scheduler', 'virtio']
+	'null', 'openssl', 'qat', 'scheduler', 'virtio', 'zuc']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
diff --git a/drivers/crypto/zuc/meson.build b/drivers/crypto/zuc/meson.build
new file mode 100644
index 000000000..b8ca7107e
--- /dev/null
+++ b/drivers/crypto/zuc/meson.build
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Intel Corporation
+
+lib = cc.find_library('libsso_zuc', required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+endif
+
+sources = files('rte_zuc_pmd.c', 'rte_zuc_pmd_ops.c')
+deps += ['bus_vdev']
-- 
2.13.6