From: Bhagavathi Perumal S <bperumal@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, devicetree@vger.kernel.org,
Bhagavathi Perumal S <bperumal@codeaurora.org>
Subject: [PATCH v4 1/3] dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example
Date: Tue, 11 Dec 2018 21:43:22 +0530 [thread overview]
Message-ID: <1544544804-4039-2-git-send-email-bperumal@codeaurora.org> (raw)
In-Reply-To: <1544544804-4039-1-git-send-email-bperumal@codeaurora.org>
In qcom,ath10k documentation, ath10k is used as node name in the example of
pci based device. Normally, node name should be class of device and not the
model name, so fix it to node name "wifi". And remove the property device_type
pci since only pci bridges should have this property.
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
---
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 2196d1a..ef60f25 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -74,9 +74,8 @@ pci {
#address-cells = <3>;
device_type = "pci";
- ath10k@0,0 {
+ wifi@0,0 {
reg = <0 0 0 0 0>;
- device_type = "pci";
qcom,ath10k-calibration-data = [ 01 02 03 ... ];
};
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Bhagavathi Perumal S <bperumal-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: ath10k-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Bhagavathi Perumal S
<bperumal-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH v4 1/3] dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example
Date: Tue, 11 Dec 2018 21:43:22 +0530 [thread overview]
Message-ID: <1544544804-4039-2-git-send-email-bperumal@codeaurora.org> (raw)
In-Reply-To: <1544544804-4039-1-git-send-email-bperumal-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
In qcom,ath10k documentation, ath10k is used as node name in the example of
pci based device. Normally, node name should be class of device and not the
model name, so fix it to node name "wifi". And remove the property device_type
pci since only pci bridges should have this property.
Signed-off-by: Bhagavathi Perumal S <bperumal-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
---
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 2196d1a..ef60f25 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -74,9 +74,8 @@ pci {
#address-cells = <3>;
device_type = "pci";
- ath10k@0,0 {
+ wifi@0,0 {
reg = <0 0 0 0 0>;
- device_type = "pci";
qcom,ath10k-calibration-data = [ 01 02 03 ... ];
};
};
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Bhagavathi Perumal S <bperumal@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: devicetree@vger.kernel.org, linux-wireless@vger.kernel.org,
Bhagavathi Perumal S <bperumal@codeaurora.org>
Subject: [PATCH v4 1/3] dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example
Date: Tue, 11 Dec 2018 21:43:22 +0530 [thread overview]
Message-ID: <1544544804-4039-2-git-send-email-bperumal@codeaurora.org> (raw)
In-Reply-To: <1544544804-4039-1-git-send-email-bperumal@codeaurora.org>
In qcom,ath10k documentation, ath10k is used as node name in the example of
pci based device. Normally, node name should be class of device and not the
model name, so fix it to node name "wifi". And remove the property device_type
pci since only pci bridges should have this property.
Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
---
Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 2196d1a..ef60f25 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -74,9 +74,8 @@ pci {
#address-cells = <3>;
device_type = "pci";
- ath10k@0,0 {
+ wifi@0,0 {
reg = <0 0 0 0 0>;
- device_type = "pci";
qcom,ath10k-calibration-data = [ 01 02 03 ... ];
};
};
--
1.9.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2018-12-11 16:14 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-11 16:13 [PATCH v4 0/3] ath10k: Add support to configure BB timing for external FEM Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S [this message]
2018-12-11 16:13 ` [PATCH v4 1/3] dt-bindings: net: ath10k: fix node name and device type in qcom ath10k example Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S
2018-12-17 21:44 ` Rob Herring
2018-12-17 21:44 ` Rob Herring
2018-12-17 21:44 ` Rob Herring
2018-12-20 17:10 ` Kalle Valo
2018-12-20 17:10 ` Kalle Valo
2018-12-20 17:10 ` Kalle Valo
2018-12-20 17:10 ` Kalle Valo
2018-12-11 16:13 ` [PATCH v4 2/3] dt-bindings: net: ath10k: add new dt entry to identify external FEM Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S
2018-12-11 20:07 ` Sebastian Gottschall
[not found] ` <5dd13e00175645e495df16858399d678@euamsexm01f.eu.qualcomm.com>
2018-12-12 4:40 ` Bhagavathi Perumal S
2018-12-12 5:52 ` Bhagavathi Perumal S
2018-12-13 9:08 ` Kalle Valo
2018-12-17 20:37 ` Rob Herring
2018-12-17 20:37 ` Rob Herring
2018-12-17 20:37 ` Rob Herring
2018-12-20 13:23 ` Kalle Valo
2018-12-20 13:23 ` Kalle Valo
2018-12-20 13:23 ` Kalle Valo
2018-12-11 16:13 ` [PATCH v4 3/3] ath10k: Add support to configure BB timing over wmi Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S
2018-12-11 16:13 ` Bhagavathi Perumal S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544544804-4039-2-git-send-email-bperumal@codeaurora.org \
--to=bperumal@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.