From: Haren Myneni <haren@linux.ibm.com> To: mpe@ellerman.id.au Cc: hch@infradead.org, devicetree@vger.kernel.org, mikey@neuling.org, herbert@gondor.apana.org.au, npiggin@gmail.com, linuxppc-dev@lists.ozlabs.org, sukadev@linux.vnet.ibm.com Subject: [PATCH V3 06/13] powerpc/vas: Register NX with fault window ID and IRQ port value Date: Mon, 16 Dec 2019 21:55:35 -0800 [thread overview] Message-ID: <1576562135.16318.6540.camel@hbabu-laptop> (raw) In-Reply-To: <1576561080.16318.6531.camel@hbabu-laptop> For each user space send window, register NX with fault window ID and port value so that NX paste CRBs in this fault FIFO when it sees fault on the request buffer. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Haren Myneni <haren@us.ibm.com> --- arch/powerpc/platforms/powernv/vas-window.c | 15 +++++++++++++-- arch/powerpc/platforms/powernv/vas.h | 15 +++++++++++++++ 2 files changed, 28 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/powernv/vas-window.c b/arch/powerpc/platforms/powernv/vas-window.c index cec1b41..e36c5d2 100644 --- a/arch/powerpc/platforms/powernv/vas-window.c +++ b/arch/powerpc/platforms/powernv/vas-window.c @@ -373,7 +373,7 @@ int init_winctx_regs(struct vas_window *window, struct vas_winctx *winctx) init_xlate_regs(window, winctx->user_win); val = 0ULL; - val = SET_FIELD(VAS_FAULT_TX_WIN, val, 0); + val = SET_FIELD(VAS_FAULT_TX_WIN, val, winctx->fault_win_id); write_hvwc_reg(window, VREG(FAULT_TX_WIN), val); /* In PowerNV, interrupts go to HV. */ @@ -748,6 +748,8 @@ static void init_winctx_for_rxwin(struct vas_window *rxwin, winctx->min_scope = VAS_SCOPE_LOCAL; winctx->max_scope = VAS_SCOPE_VECTORED_GROUP; + if (rxwin->vinst->virq) + winctx->irq_port = rxwin->vinst->irq_port; } static bool rx_win_args_valid(enum vas_cop_type cop, @@ -945,13 +947,22 @@ static void init_winctx_for_txwin(struct vas_window *txwin, winctx->lpid = txattr->lpid; winctx->pidr = txattr->pidr; winctx->rx_win_id = txwin->rxwin->winid; + /* + * IRQ and fault window setup is successful. Set fault window + * for the send window so that ready to handle faults. + */ + if (txwin->vinst->virq) + winctx->fault_win_id = txwin->vinst->fault_win->winid; winctx->dma_type = VAS_DMA_TYPE_INJECT; winctx->tc_mode = txattr->tc_mode; winctx->min_scope = VAS_SCOPE_LOCAL; winctx->max_scope = VAS_SCOPE_VECTORED_GROUP; + if (txwin->vinst->virq) + winctx->irq_port = txwin->vinst->irq_port; - winctx->pswid = 0; + winctx->pswid = txattr->pswid ? txattr->pswid : + encode_pswid(txwin->vinst->vas_id, txwin->winid); } static bool tx_win_args_valid(enum vas_cop_type cop, diff --git a/arch/powerpc/platforms/powernv/vas.h b/arch/powerpc/platforms/powernv/vas.h index 879f5b4..2621df1 100644 --- a/arch/powerpc/platforms/powernv/vas.h +++ b/arch/powerpc/platforms/powernv/vas.h @@ -455,6 +455,21 @@ static inline u64 read_hvwc_reg(struct vas_window *win, return in_be64(win->hvwc_map+reg); } +/* + * Encode/decode the Partition Send Window ID (PSWID) for a window in + * a way that we can uniquely identify any window in the system. i.e. + * we should be able to locate the 'struct vas_window' given the PSWID. + * + * Bits Usage + * 0:7 VAS id (8 bits) + * 8:15 Unused, 0 (3 bits) + * 16:31 Window id (16 bits) + */ +static inline u32 encode_pswid(int vasid, int winid) +{ + return ((u32)winid | (vasid << (31 - 7))); +} + static inline void decode_pswid(u32 pswid, int *vasid, int *winid) { if (vasid) -- 1.8.3.1
WARNING: multiple messages have this Message-ID (diff)
From: Haren Myneni <haren@linux.ibm.com> To: mpe@ellerman.id.au Cc: devicetree@vger.kernel.org, mikey@neuling.org, herbert@gondor.apana.org.au, npiggin@gmail.com, hch@infradead.org, sukadev@linux.vnet.ibm.com, linuxppc-dev@lists.ozlabs.org Subject: [PATCH V3 06/13] powerpc/vas: Register NX with fault window ID and IRQ port value Date: Mon, 16 Dec 2019 21:55:35 -0800 [thread overview] Message-ID: <1576562135.16318.6540.camel@hbabu-laptop> (raw) In-Reply-To: <1576561080.16318.6531.camel@hbabu-laptop> For each user space send window, register NX with fault window ID and port value so that NX paste CRBs in this fault FIFO when it sees fault on the request buffer. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Haren Myneni <haren@us.ibm.com> --- arch/powerpc/platforms/powernv/vas-window.c | 15 +++++++++++++-- arch/powerpc/platforms/powernv/vas.h | 15 +++++++++++++++ 2 files changed, 28 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/powernv/vas-window.c b/arch/powerpc/platforms/powernv/vas-window.c index cec1b41..e36c5d2 100644 --- a/arch/powerpc/platforms/powernv/vas-window.c +++ b/arch/powerpc/platforms/powernv/vas-window.c @@ -373,7 +373,7 @@ int init_winctx_regs(struct vas_window *window, struct vas_winctx *winctx) init_xlate_regs(window, winctx->user_win); val = 0ULL; - val = SET_FIELD(VAS_FAULT_TX_WIN, val, 0); + val = SET_FIELD(VAS_FAULT_TX_WIN, val, winctx->fault_win_id); write_hvwc_reg(window, VREG(FAULT_TX_WIN), val); /* In PowerNV, interrupts go to HV. */ @@ -748,6 +748,8 @@ static void init_winctx_for_rxwin(struct vas_window *rxwin, winctx->min_scope = VAS_SCOPE_LOCAL; winctx->max_scope = VAS_SCOPE_VECTORED_GROUP; + if (rxwin->vinst->virq) + winctx->irq_port = rxwin->vinst->irq_port; } static bool rx_win_args_valid(enum vas_cop_type cop, @@ -945,13 +947,22 @@ static void init_winctx_for_txwin(struct vas_window *txwin, winctx->lpid = txattr->lpid; winctx->pidr = txattr->pidr; winctx->rx_win_id = txwin->rxwin->winid; + /* + * IRQ and fault window setup is successful. Set fault window + * for the send window so that ready to handle faults. + */ + if (txwin->vinst->virq) + winctx->fault_win_id = txwin->vinst->fault_win->winid; winctx->dma_type = VAS_DMA_TYPE_INJECT; winctx->tc_mode = txattr->tc_mode; winctx->min_scope = VAS_SCOPE_LOCAL; winctx->max_scope = VAS_SCOPE_VECTORED_GROUP; + if (txwin->vinst->virq) + winctx->irq_port = txwin->vinst->irq_port; - winctx->pswid = 0; + winctx->pswid = txattr->pswid ? txattr->pswid : + encode_pswid(txwin->vinst->vas_id, txwin->winid); } static bool tx_win_args_valid(enum vas_cop_type cop, diff --git a/arch/powerpc/platforms/powernv/vas.h b/arch/powerpc/platforms/powernv/vas.h index 879f5b4..2621df1 100644 --- a/arch/powerpc/platforms/powernv/vas.h +++ b/arch/powerpc/platforms/powernv/vas.h @@ -455,6 +455,21 @@ static inline u64 read_hvwc_reg(struct vas_window *win, return in_be64(win->hvwc_map+reg); } +/* + * Encode/decode the Partition Send Window ID (PSWID) for a window in + * a way that we can uniquely identify any window in the system. i.e. + * we should be able to locate the 'struct vas_window' given the PSWID. + * + * Bits Usage + * 0:7 VAS id (8 bits) + * 8:15 Unused, 0 (3 bits) + * 16:31 Window id (16 bits) + */ +static inline u32 encode_pswid(int vasid, int winid) +{ + return ((u32)winid | (vasid << (31 - 7))); +} + static inline void decode_pswid(u32 pswid, int *vasid, int *winid) { if (vasid) -- 1.8.3.1
next prev parent reply other threads:[~2019-12-17 5:57 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-17 5:38 [PATCH V3 00/13] powerpc/vas: Page fault handling for user space NX requests Haren Myneni 2019-12-17 5:38 ` Haren Myneni 2019-12-17 5:48 ` [PATCH V3 01/13] powerpc/vas: Describe vas-port and interrupts properties Haren Myneni 2019-12-17 5:48 ` Haren Myneni 2019-12-18 22:18 ` Rob Herring 2019-12-18 22:18 ` Rob Herring 2019-12-18 23:15 ` Haren Myneni 2019-12-18 23:15 ` Haren Myneni 2019-12-17 5:49 ` [PATCH V3 02/13] powerpc/vas: Define nx_fault_stamp in coprocessor_request_block Haren Myneni 2019-12-17 5:49 ` Haren Myneni 2019-12-17 5:49 ` [PATCH V3 03/13] powerpc/vas: Read interrupts and vas-port device tree properties Haren Myneni 2019-12-17 5:49 ` Haren Myneni 2019-12-17 5:54 ` [PATCH V3 04/13] powerpc/vas: Setup fault window per VAS instance Haren Myneni 2019-12-17 5:54 ` Haren Myneni 2019-12-17 5:55 ` [PATCH V3 05/13] powerpc/vas: Setup thread IRQ handler " Haren Myneni 2019-12-17 5:55 ` Haren Myneni 2019-12-17 5:55 ` Haren Myneni [this message] 2019-12-17 5:55 ` [PATCH V3 06/13] powerpc/vas: Register NX with fault window ID and IRQ port value Haren Myneni 2019-12-17 5:56 ` [PATCH V3 07/13] powerpc/vas: Take reference to PID and mm for userspace windows Haren Myneni 2019-12-17 5:56 ` Haren Myneni 2019-12-17 5:56 ` [PATCH V3 08/13] powerpc/vas: Update CSB and notify process for fault CRBs Haren Myneni 2019-12-17 5:56 ` Haren Myneni 2019-12-17 5:58 ` [PATCH V3 09/13] powerpc/vas: Print CRB and FIFO values Haren Myneni 2019-12-17 5:58 ` Haren Myneni 2019-12-17 5:58 ` [PATCH V3 10/13] powerpc/vas: Do not use default credits for receive window Haren Myneni 2019-12-17 5:58 ` Haren Myneni 2019-12-17 5:59 ` [PATCH V3 11/13] powerpc/VAS: Return credits after handling fault Haren Myneni 2019-12-17 5:59 ` Haren Myneni 2019-12-17 6:00 ` [PATCH V3 12/13] powerpc/vas: Display process stuck message Haren Myneni 2019-12-17 6:00 ` Haren Myneni 2019-12-17 6:00 ` [PATCH V3 13/13] powerpc/vas: Free send window in VAS instance after credits returned Haren Myneni 2019-12-17 6:00 ` Haren Myneni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1576562135.16318.6540.camel@hbabu-laptop \ --to=haren@linux.ibm.com \ --cc=devicetree@vger.kernel.org \ --cc=hch@infradead.org \ --cc=herbert@gondor.apana.org.au \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mikey@neuling.org \ --cc=mpe@ellerman.id.au \ --cc=npiggin@gmail.com \ --cc=sukadev@linux.vnet.ibm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.