From: Paul Cercueil <paul@crapouillou.net>
To: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Stenkin Evgeniy <stenkinevgeniy@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] ARM: DTS: Add devicetree file for the Galaxy S2
Date: Fri, 13 Mar 2020 15:36:51 +0100 [thread overview]
Message-ID: <1584110211.3.2@crapouillou.net> (raw)
In-Reply-To: <1584109750.3.0@crapouillou.net>
Le ven., mars 13, 2020 at 15:29, Paul Cercueil <paul@crapouillou.net> a
écrit :
> Hi Marek,
>
>
> Le ven., mars 13, 2020 at 09:03, Marek Szyprowski
> <m.szyprowski@samsung.com> a écrit :
>>
>> On 12.03.2020 16:34, Paul Cercueil wrote:
>>> From: Stenkin Evgeniy <stenkinevgeniy@gmail.com>
>>>
>>> Add devicetree file for the Exynos 4210 based Galaxy S2 (i9100
>>> \x7f\x7fversion).
>>>
>>> Signed-off-by: Stenkin Evgeniy <stenkinevgeniy@gmail.com>
>>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>> ---
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/exynos4210-i9100.dts | 816
>>> \x7f\x7f+++++++++++++++++++++++++
>>> 2 files changed, 817 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/exynos4210-i9100.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile
>>> b/arch/arm/boot/dts/Makefile
>>> index d6546d2676b9..522436d30690 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
>>> exynos3250-monk.dtb \
>>> exynos3250-rinato.dtb
>>> dtb-$(CONFIG_ARCH_EXYNOS4) += \
>>> + exynos4210-i9100.dtb \
>>> exynos4210-origen.dtb \
>>> exynos4210-smdkv310.dtb \
>>> exynos4210-trats.dtb \
>>> diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts
>>> \x7f\x7fb/arch/arm/boot/dts/exynos4210-i9100.dts
>>> new file mode 100644
>>> index 000000000000..c218e34959be
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/exynos4210-i9100.dts
>>> @@ -0,0 +1,816 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Samsung's Exynos4210 based Galaxy S2 (i9100 version) device
>>> tree
>>> + *
>>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>>> + * http://www.samsung.com
>>> + * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
>>> + * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
>>> + *
>>> + * Device tree source file for Samsung's Galaxy S2 smartphone
>>> \x7f\x7f(i9100 version),
>>> + * which is based on Samsung's Exynos4210 SoC.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "exynos4210.dtsi"
>>> +#include "exynos4412-ppmu-common.dtsi"
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/input/linux-event-codes.h>
>>> +
>>> +/ {
>>> + model = "Samsung Galaxy S2 (i9100)";
>>> + compatible = "samsung,i9100", "samsung,exynos4210",
>>> \x7f\x7f"samsung,exynos4";
>>> +
>>> +
>>> + memory@40000000 {
>>> + device_type = "memory";
>>> + reg = <0x40000000 0x40000000>;
>>> + };
>>> +
>>> + vemmc_reg: regulator-0 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "VMEM_VDD_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + tsp_reg: regulator-1 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "TSP_FIXED_VOLTAGES";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
>>> + startup-delay-us = <70000>;
>>> + enable-active-high;
>>> + regulator-boot-on;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + cam_af_28v_reg: regulator-3 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "8M_AF_2.8V_EN";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + cam_io_en_reg: regulator-4 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "CAM_IO_EN";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + cam_io_12v_reg: regulator-5 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "8M_1.2V_EN";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + vt_core_15v_reg: regulator-6 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "VT_CORE_1.5V";
>>> + regulator-min-microvolt = <1500000>;
>>> + regulator-max-microvolt = <1500000>;
>>> + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + gpio-keys {
>>> + compatible = "gpio-keys";
>>> +
>>> + vol-down {
>>> + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_VOLUMEDOWN>;
>>> + label = "volume down";
>>> + debounce-interval = <10>;
>>> + };
>>> +
>>> + vol-up {
>>> + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_VOLUMEUP>;
>>> + label = "volume up";
>>> + debounce-interval = <10>;
>>> + };
>>> +
>>> + power {
>>> + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_POWER>;
>>> + label = "power";
>>> + debounce-interval = <10>;
>>> + wakeup-source;
>>> + };
>>> +
>>> + ok {
>>> + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_OK>;
>>> + label = "ok";
>>> + debounce-interval = <10>;
>>> + };
>>> + };
>>> +
>>> + wlan_pwrseq: sdhci3-pwrseq {
>>> + compatible = "mmc-pwrseq-simple";
>>> + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
>>> + };
>>> +
>>> + i2c_max17042_fuel: i2c-gpio-3 {
>>> + compatible = "i2c-gpio";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + sda-gpios = <&gpy4 0 GPIO_ACTIVE_HIGH>;
>>> + scl-gpios = <&gpy4 1 GPIO_ACTIVE_HIGH>;
>>> + i2c-gpio,delay-us = <5>;
>>> +
>>> + battery@36 {
>>> + compatible = "maxim,max17042";
>>> +
>>> + interrupt-parent = <&gpx2>;
>>> + interrupts = <3 2>;
>>> +
>>> + pinctrl-0 = <&max17042_fuel_irq>;
>>> + pinctrl-names = "default";
>>> +
>>> + reg = <0x36>;
>>> + maxim,over-heat-temp = <700>;
>>> + maxim,over-volt = <4500>;
>>> +
>>> + };
>>> + };
>>> +
>>> + spi-lcd {
>>> + compatible = "spi-gpio";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + num-chipselects = <1>;
>>> + cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
>> LD9040 CS is active low, so this board needs probably the same fix a
>> Universal C210 board: https://patchwork.kernel.org/patch/11420231/
>> Are
>> you sure it really works now with v5.6-rcX kernels? Or you just got
>> \x7fthe
>> panel working only because the bootloader enabled it?
>
> Sorry but the fix looks bogus to me. The spi-gpio driver calls
> gpiod_set_value(0) when the CS is going *active*, and
> gpiod_set_value(1) when the CS is going *inactive*. If you use the
> GPIO_ACTIVE_LOW flag, the levels are inverted, and the CS is high
> when active, which is the opposite of what you want.
Correction: the driver sets the SPI_CS_HIGH flag. I guess that's what's
new. So indeed GPIO_ACTIVE_LOW should be used.
-Paul
>>> + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
>>> + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
>>> +
>>> + lcd@0 {
>>> + compatible = "samsung,ld9040";
>>> + reg = <0>;
>>> +
>>> + spi-max-frequency = <1200000>;
>>> + spi-cpol;
>>> + spi-cpha;
>>> +
>>> + vdd3-supply = <&vmipi_reg>;
>>> + vci-supply = <&vcclcd_reg>;
>>> +
>>> + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
>>> + power-on-delay = <10>;
>>> + reset-delay = <10>;
>>> +
>>> + panel-width-mm = <90>;
>>> + panel-height-mm = <154>;
>>> +
>>> + display-timings {
>>> + timing {
>>> + clock-frequency = <23492370>;
>>> + hactive = <480>;
>>> + vactive = <800>;
>>> + hback-porch = <16>;
>>> + hfront-porch = <16>;
>>> + vback-porch = <2>;
>>> + vfront-porch = <28>;
>>> + hsync-len = <2>;
>>> + vsync-len = <1>;
>>> + hsync-active = <0>;
>>> + vsync-active = <0>;
>>> + de-active = <0>;
>>> + pixelclk-active = <0>;
>>> + };
>>> + };
>>> +
>>> + port {
>>> + lcd_ep: endpoint {
>>> + remote-endpoint = <&fimd_dpi_ep>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> + fixed-rate-clocks {
>>> + xxti {
>>> + compatible = "samsung,clock-xxti";
>>> + clock-frequency = <0>;
>>> + };
>>> +
>>> + xusbxti {
>>> + compatible = "samsung,clock-xusbxti";
>>> + clock-frequency = <24000000>;
>>> + };
>>> + };
>>> +
>>> + thermal-zones {
>>> + cpu_thermal: cpu-thermal {
>>> + cooling-maps {
>>> + map0 {
>>> + /* Corresponds to 800MHz */
>>> + cooling-device = <&cpu0 2 2>;
>>> + };
>>> + map1 {
>>> + /* Corresponds to 200MHz */
>>> + cooling-device = <&cpu0 4 4>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> +};
>>> +
>>> +&camera {
>>> + status = "okay";
>>> +};
>>> +
>>> +&cpu0 {
>>> + cpu0-supply = <&varm_breg>;
>>> +};
>>> +
>>> +&exynos_usbphy {
>>> + status = "okay";
>>> +
>>> + vbus-supply = <&safe1_sreg>;
>>> +};
>>> +
>>> +&fimc_0 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC0>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimc_1 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC1>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimc_2 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC2>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimc_3 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC3>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimd {
>>> + status = "okay";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + samsung,invert-vden;
>>> + samsung,invert-vclk;
>>> +
>>> + pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
>>> + pinctrl-names = "default";
>>> +
>>> + port@3 {
>>> + reg = <3>;
>>> +
>>> + fimd_dpi_ep: endpoint {
>>> + remote-endpoint = <&lcd_ep>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&hsotg {
>>> + status = "okay";
>>> +
>>> + dr_mode = "otg";
>> The the host mode really works with DWC2? Afair the host mode worked
>> only when it was rerouted by PHY to the EHCI (at least on
>> \x7fUniversalC210
>> board, which is very similar to GS2).
>
> I have to say that I didn't try OTG / host, but it does work fine in
> gadget mode.
> I can change it to dr_mode = "peripheral" for now, if you prefer.
>
>>> + vusb_d-supply = <&vusb_reg>;
>>> + vusb_a-supply = <&vusbdac_reg>;
>>> +};
>>> +
>>> +&ehci {
>>> + status = "okay";
>>> +
>>> + port@0 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@1 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@2 {
>>> + status = "okay";
>>> + };
>>> +};
>>
>> This is the old, obsolete exynos-ehci binding. Please remove 'port'
>> nodes and use standard USB phy bindings like it has been done in the
>> following patch: https://patchwork.kernel.org/patch/11060465/
>
> Will do.
>
>> BTW, do you really need all 3 phys/ports?
>
> No idea!
>
>>> +
>>> +
>>> +&i2c_3 {
>>> + status = "okay";
>>> +
>>> + samsung,i2c-sda-delay = <100>;
>>> + samsung,i2c-slave-addr = <0x10>;
>>> + samsung,i2c-max-bus-freq = <100000>;
>>> +
>>> + pinctrl-0 = <&i2c3_bus>;
>>> + pinctrl-names = "default";
>>> +
>>> + mxt224-touchscreen@4a {
>>> + compatible = "atmel,maxtouch";
>>> + reg = <0x4a>;
>>> +
>>> + interrupt-parent = <&gpx0>;
>>> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
>>> +
>>> + avdd-supply = <&tsp_reg>;
>>> + vdd-supply = <&tsp_reg>;
>>> + };
>>> +};
>>> +
>>> +&i2c_7 {
>>> + status = "okay";
>>> +
>>> + samsung,i2c-sda-delay = <100>;
>>> + samsung,i2c-slave-addr = <0x10>;
>>> + samsung,i2c-max-bus-freq = <400000>;
>>> +
>>> + pinctrl-0 = <&i2c7_bus>;
>>> + pinctrl-names = "default";
>>> +
>>> + ak8975@c {
>>> + compatible = "asahi-kasei,ak8975";
>>> + reg = <0x0c>;
>>> +
>>> + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
>>> + };
>>> +};
>>> +
>>> +
>>> +&i2c_5 {
>>> + status = "okay";
>>> +
>>> + samsung,i2c-sda-delay = <100>;
>>> + samsung,i2c-slave-addr = <0x10>;
>>> + samsung,i2c-max-bus-freq = <100000>;
>>> +
>>> + pinctrl-0 = <&i2c5_bus>;
>>> + pinctrl-names = "default";
>>> +
>>> + max8997_pmic@66 {
>>> + compatible = "maxim,max8997-pmic";
>>> + reg = <0x66>;
>>> +
>>> + interrupts-extended = <&gpx0 7 0>, <&gpx2 3 2>;
>>> + interrupt-parent = <&gpx0>;
>>> + interrupts = <7 IRQ_TYPE_NONE>;
>>> +
>>> + otg_en-gpios = <&gpx3 3 0>;
>>> + usb_sel-gpios = <&gpl0 6 0>;
>>> +
>>> + max8997,pmic-buck1-uses-gpio-dvs;
>>> + max8997,pmic-buck2-uses-gpio-dvs;
>>> + max8997,pmic-buck5-uses-gpio-dvs;
>>> +
>>> + max8997,pmic-ignore-gpiodvs-side-effect;
>>> + max8997,pmic-buck125-default-dvs-idx = <0>;
>>> +
>>> + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
>>> + <&gpx0 6 GPIO_ACTIVE_HIGH>,
>>> + <&gpl0 0 GPIO_ACTIVE_HIGH>;
>>> +
>>> + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
>>> + <1250000>, <1200000>,
>>> + <1150000>, <1100000>,
>>> + <1000000>, <950000>;
>>> +
>>> + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
>>> + <950000>, <900000>,
>>> + <1100000>, <1000000>,
>>> + <950000>, <900000>;
>>> +
>>> + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
>>> + <1200000>, <1200000>,
>>> + <1200000>, <1200000>,
>>> + <1200000>, <1200000>;
>>> +
>>> + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
>>> + pinctrl-names = "default";
>>> +
>>> + regulators {
>>> + vadc_reg: LDO1 {
>>> + regulator-name = "VADC_3.3V_C210";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-always-on;
>>> +
>>> + };
>>> + valive_reg: LDO2 {
>>> + regulator-name = "VALIVE_1.1V_C210";
>>> + regulator-min-microvolt = <1100000>;
>>> + regulator-max-microvolt = <1100000>;
>>> + regulator-always-on;
>>> +
>>> + };
>>> +
>>> + vusb_reg: LDO3 {
>>> + regulator-name = "VUSB_1.1V_C210";
>>> + regulator-min-microvolt = <1100000>;
>>> + regulator-max-microvolt = <1100000>;
>>> + };
>>> +
>>> + vmipi_reg: LDO4 {
>>> + regulator-name = "VMIPI_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vhsic_reg: LDO5 {
>>> + regulator-name = "VHSIC_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vpda_reg: LDO6 {
>>> + regulator-name = "VCC_1.8V_PDA";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vcam_reg: LDO7 {
>>> + regulator-name = "CAM_ISP_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> +
>>> + vusbdac_reg: LDO8 {
>>> + regulator-name = "VUSB+VDAC_3.3V_C210";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + };
>>> +
>>> + vccpda_reg: LDO9 {
>>> + regulator-name = "VCC_2.8V_PDA";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vtouch_reg: LDO11 {
>>> + regulator-name = "TOUCH_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vpll_reg: LDO10 {
>>> + regulator-name = "VPLL_1.1V";
>>> + regulator-min-microvolt = <1100000>;
>>> + regulator-max-microvolt = <1100000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vtcam_reg: LDO12 {
>>> + regulator-name = "VT_CAM_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> +
>>> + vcclcd_reg: LDO13 {
>>> + regulator-name = "VCC_3.0V_LCD";
>>> + regulator-min-microvolt = <3000000>;
>>> + regulator-max-microvolt = <3000000>;
>>> + };
>>> +
>>> + vmotor_reg: LDO14 {
>>> + regulator-name = "VCC_2.8V_MOTOR";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + };
>>> +
>>> + vled_reg: LDO15 {
>>> + regulator-name = "LED_A_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + };
>>> +
>>> + camsensor_reg: LDO16 {
>>> + regulator-name = "CAM_SENSOR_IO_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> +
>>> + vtf_reg: LDO17 {
>>> + regulator-name = "VTF_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + };
>>> +
>>> + vtouchled_reg: LDO18 {
>>> + regulator-name = "TOUCH_LED_3.3V";
>>> + regulator-min-microvolt = <2500000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + };
>>> +
>>> + vddq_reg: LDO21 {
>>> + regulator-name = "VDDQ_M1M2_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + varm_breg: BUCK1 {
>>> + //regulator-name = "VARM_1.2V_C210";
>>> + regulator-name = "vdd_arm";
>>> + regulator-min-microvolt = <65000>;
>>> + regulator-max-microvolt = <2225000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vint_breg: BUCK2 {
>>> + regulator-name = "VINT_1.1V_C210";
>>> + regulator-min-microvolt = <65000>;
>>> + regulator-max-microvolt = <2225000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vg3d_breg: BUCK3 {
>>> + regulator-name = "G3D_1.1V";
>>> + regulator-min-microvolt = <900000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + camisp_breg: BUCK4 {
>>> + regulator-name = "CAM_ISP_CORE_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + };
>>> +
>>> + vmem_breg: BUCK5 {
>>> + regulator-name = "VMEM_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vccsub_breg: BUCK7 {
>>> + regulator-name = "VCC_SUB_2.0V";
>>> + regulator-min-microvolt = <2000000>;
>>> + regulator-max-microvolt = <2000000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + safe1_sreg: ESAFEOUT1 {
>>> + regulator-name = "SAFEOUT1";
>>> + };
>>> +
>>> + safe2_sreg: ESAFEOUT2 {
>>> + regulator-name = "SAFEOUT2";
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + charger_reg: CHARGER {
>>> + regulator-name = "CHARGER";
>>> + regulator-min-microamp = <60000>;
>>> + regulator-max-microamp = <2580000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + chargercv_reg: CHARGER_CV {
>>> + regulator-name = "CHARGER_CV";
>>> + regulator-min-microvolt = <3800000>;
>>> + regulator-max-microvolt = <4100000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + };
>>> +
>>> + };
>>> +};
>>> +
>>> +
>>> +&gpu {
>>> + status = "okay";
>>> +
>>> + mali-supply = <&vg3d_breg>;
>>> + regulator-microvolt-offset = <50000>;
>>> + regulator-microsecs-delay = <50>;
>>> +};
>>> +
>>> +
>>> +&sdhci_0 {
>>> + status = "okay";
>>> +
>>> + bus-width = <8>;
>>> + non-removable;
>>> + vmmc-supply = <&vemmc_reg>;
>>> +
>>> + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
>>> + pinctrl-names = "default";
>>> +};
>>> +
>>> +&sdhci_2 {
>>> + status = "okay";
>>> +
>>> + bus-width = <4>;
>>> + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
>>> + vmmc-supply = <&vtf_reg>;
>>> +
>>> + pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
>>> + pinctrl-names = "default";
>>> +};
>>> +
>>> +&ehci {
>>> + port@0 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@1 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@2 {
>>> + status = "okay";
>>> + };
>>> +
>>> +};
>>
>> This is duplicated 'ehci' node, probable an artifact from the earlier
>> rebase. Please remove it.
>
> Right, didn't even notice it.
>
> Will remove it and send a V2.
>
> Cheers,
> -Paul
>
>>> +
>>> +
>>> +&sdhci_3 {
>>> + status = "okay";
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + non-removable;
>>> + bus-width = <4>;
>>> + mmc-pwrseq = <&wlan_pwrseq>;
>>> + vmmc-supply = <&vtf_reg>;
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
>>> +
>>> + brcmf: wifi@1 {
>>> + compatible = "brcm,bcm4330-fmac";
>>> + reg = <1>;
>>> +
>>> + interrupt-parent = <&gpx2>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "host-wake";
>>> + };
>>> +};
>>> +
>>> +
>>> +&serial_0 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
>>> +
>>> + bluetooth {
>>> + compatible = "brcm,bcm4330-bt";
>>> +
>>> + shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
>>> + reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
>>> + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
>>> + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
>>> + };
>>> +};
>>> +
>>> +&serial_1 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&serial_2 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&serial_3 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&tmu {
>>> + status = "okay";
>>> +};
>>> +
>>> +
>>> +&pinctrl_0 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&sleep0>;
>>> +
>>> +
>>> + sleep0: sleep-states {
>>> + gpa0-0 {
>>> + samsung,pins = "gpa0-0";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + gpa0-1 {
>>> + samsung,pins = "gpa0-1";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + gpa0-2 {
>>> + samsung,pins = "gpa0-2";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + gpa0-3 {
>>> + samsung,pins = "gpa0-3";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&pinctrl_1 {
>>> + mhl_int: mhl-int {
>>> + samsung,pins = "gpf3-5";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + i2c_mhl_bus: i2c-mhl-bus {
>>> + samsung,pins = "gpf0-4", "gpf0-6";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>>> + };
>>> +
>>> + usb_sel: usb-sel {
>>> + samsung,pins = "gpl0-6";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> + bt_en: bt-en {
>>> + samsung,pins = "gpl0-4";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> + bt_res: bt-res {
>>> + samsung,pins = "gpl1-0";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> +
>>> + otg_gp: otg-gp {
>>> + samsung,pins = "gpx3-3";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> + mag_mhl_gpio: mag-mhl-gpio {
>>> + samsung,pins = "gpd0-2";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> +
>>> + max8997_irq: max8997-irq {
>>> + samsung,pins = "gpx0-7";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + max17042_fuel_irq: max17042-fuel-irq {
>>> + samsung,pins = "gpx2-3";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + tsp224_irq: tsp224-irq {
>>> + samsung,pins = "gpx0-4";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>>> + };
>>> +};
>>
>> Best regards
>> --
>> Marek Szyprowski, PhD
>> Samsung R&D Institute Poland
>>
>
WARNING: multiple messages have this Message-ID (diff)
From: Paul Cercueil <paul@crapouillou.net>
To: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org,
Stenkin Evgeniy <stenkinevgeniy@gmail.com>,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>,
Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] ARM: DTS: Add devicetree file for the Galaxy S2
Date: Fri, 13 Mar 2020 15:36:51 +0100 [thread overview]
Message-ID: <1584110211.3.2@crapouillou.net> (raw)
In-Reply-To: <1584109750.3.0@crapouillou.net>
Le ven., mars 13, 2020 at 15:29, Paul Cercueil <paul@crapouillou.net> a
écrit :
> Hi Marek,
>
>
> Le ven., mars 13, 2020 at 09:03, Marek Szyprowski
> <m.szyprowski@samsung.com> a écrit :
>>
>> On 12.03.2020 16:34, Paul Cercueil wrote:
>>> From: Stenkin Evgeniy <stenkinevgeniy@gmail.com>
>>>
>>> Add devicetree file for the Exynos 4210 based Galaxy S2 (i9100
>>> \x7f\x7fversion).
>>>
>>> Signed-off-by: Stenkin Evgeniy <stenkinevgeniy@gmail.com>
>>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>> ---
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/exynos4210-i9100.dts | 816
>>> \x7f\x7f+++++++++++++++++++++++++
>>> 2 files changed, 817 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/exynos4210-i9100.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile
>>> b/arch/arm/boot/dts/Makefile
>>> index d6546d2676b9..522436d30690 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -181,6 +181,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
>>> exynos3250-monk.dtb \
>>> exynos3250-rinato.dtb
>>> dtb-$(CONFIG_ARCH_EXYNOS4) += \
>>> + exynos4210-i9100.dtb \
>>> exynos4210-origen.dtb \
>>> exynos4210-smdkv310.dtb \
>>> exynos4210-trats.dtb \
>>> diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts
>>> \x7f\x7fb/arch/arm/boot/dts/exynos4210-i9100.dts
>>> new file mode 100644
>>> index 000000000000..c218e34959be
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/exynos4210-i9100.dts
>>> @@ -0,0 +1,816 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Samsung's Exynos4210 based Galaxy S2 (i9100 version) device
>>> tree
>>> + *
>>> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
>>> + * http://www.samsung.com
>>> + * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
>>> + * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
>>> + *
>>> + * Device tree source file for Samsung's Galaxy S2 smartphone
>>> \x7f\x7f(i9100 version),
>>> + * which is based on Samsung's Exynos4210 SoC.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "exynos4210.dtsi"
>>> +#include "exynos4412-ppmu-common.dtsi"
>>> +
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/input/linux-event-codes.h>
>>> +
>>> +/ {
>>> + model = "Samsung Galaxy S2 (i9100)";
>>> + compatible = "samsung,i9100", "samsung,exynos4210",
>>> \x7f\x7f"samsung,exynos4";
>>> +
>>> +
>>> + memory@40000000 {
>>> + device_type = "memory";
>>> + reg = <0x40000000 0x40000000>;
>>> + };
>>> +
>>> + vemmc_reg: regulator-0 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "VMEM_VDD_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + tsp_reg: regulator-1 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "TSP_FIXED_VOLTAGES";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
>>> + startup-delay-us = <70000>;
>>> + enable-active-high;
>>> + regulator-boot-on;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + cam_af_28v_reg: regulator-3 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "8M_AF_2.8V_EN";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + cam_io_en_reg: regulator-4 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "CAM_IO_EN";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + cam_io_12v_reg: regulator-5 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "8M_1.2V_EN";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + vt_core_15v_reg: regulator-6 {
>>> + compatible = "regulator-fixed";
>>> + regulator-name = "VT_CORE_1.5V";
>>> + regulator-min-microvolt = <1500000>;
>>> + regulator-max-microvolt = <1500000>;
>>> + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
>>> + enable-active-high;
>>> + };
>>> +
>>> + gpio-keys {
>>> + compatible = "gpio-keys";
>>> +
>>> + vol-down {
>>> + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_VOLUMEDOWN>;
>>> + label = "volume down";
>>> + debounce-interval = <10>;
>>> + };
>>> +
>>> + vol-up {
>>> + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_VOLUMEUP>;
>>> + label = "volume up";
>>> + debounce-interval = <10>;
>>> + };
>>> +
>>> + power {
>>> + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_POWER>;
>>> + label = "power";
>>> + debounce-interval = <10>;
>>> + wakeup-source;
>>> + };
>>> +
>>> + ok {
>>> + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
>>> + linux,code = <KEY_OK>;
>>> + label = "ok";
>>> + debounce-interval = <10>;
>>> + };
>>> + };
>>> +
>>> + wlan_pwrseq: sdhci3-pwrseq {
>>> + compatible = "mmc-pwrseq-simple";
>>> + reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
>>> + };
>>> +
>>> + i2c_max17042_fuel: i2c-gpio-3 {
>>> + compatible = "i2c-gpio";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + sda-gpios = <&gpy4 0 GPIO_ACTIVE_HIGH>;
>>> + scl-gpios = <&gpy4 1 GPIO_ACTIVE_HIGH>;
>>> + i2c-gpio,delay-us = <5>;
>>> +
>>> + battery@36 {
>>> + compatible = "maxim,max17042";
>>> +
>>> + interrupt-parent = <&gpx2>;
>>> + interrupts = <3 2>;
>>> +
>>> + pinctrl-0 = <&max17042_fuel_irq>;
>>> + pinctrl-names = "default";
>>> +
>>> + reg = <0x36>;
>>> + maxim,over-heat-temp = <700>;
>>> + maxim,over-volt = <4500>;
>>> +
>>> + };
>>> + };
>>> +
>>> + spi-lcd {
>>> + compatible = "spi-gpio";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + num-chipselects = <1>;
>>> + cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
>> LD9040 CS is active low, so this board needs probably the same fix a
>> Universal C210 board: https://patchwork.kernel.org/patch/11420231/
>> Are
>> you sure it really works now with v5.6-rcX kernels? Or you just got
>> \x7fthe
>> panel working only because the bootloader enabled it?
>
> Sorry but the fix looks bogus to me. The spi-gpio driver calls
> gpiod_set_value(0) when the CS is going *active*, and
> gpiod_set_value(1) when the CS is going *inactive*. If you use the
> GPIO_ACTIVE_LOW flag, the levels are inverted, and the CS is high
> when active, which is the opposite of what you want.
Correction: the driver sets the SPI_CS_HIGH flag. I guess that's what's
new. So indeed GPIO_ACTIVE_LOW should be used.
-Paul
>>> + sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
>>> + mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
>>> +
>>> + lcd@0 {
>>> + compatible = "samsung,ld9040";
>>> + reg = <0>;
>>> +
>>> + spi-max-frequency = <1200000>;
>>> + spi-cpol;
>>> + spi-cpha;
>>> +
>>> + vdd3-supply = <&vmipi_reg>;
>>> + vci-supply = <&vcclcd_reg>;
>>> +
>>> + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
>>> + power-on-delay = <10>;
>>> + reset-delay = <10>;
>>> +
>>> + panel-width-mm = <90>;
>>> + panel-height-mm = <154>;
>>> +
>>> + display-timings {
>>> + timing {
>>> + clock-frequency = <23492370>;
>>> + hactive = <480>;
>>> + vactive = <800>;
>>> + hback-porch = <16>;
>>> + hfront-porch = <16>;
>>> + vback-porch = <2>;
>>> + vfront-porch = <28>;
>>> + hsync-len = <2>;
>>> + vsync-len = <1>;
>>> + hsync-active = <0>;
>>> + vsync-active = <0>;
>>> + de-active = <0>;
>>> + pixelclk-active = <0>;
>>> + };
>>> + };
>>> +
>>> + port {
>>> + lcd_ep: endpoint {
>>> + remote-endpoint = <&fimd_dpi_ep>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> + fixed-rate-clocks {
>>> + xxti {
>>> + compatible = "samsung,clock-xxti";
>>> + clock-frequency = <0>;
>>> + };
>>> +
>>> + xusbxti {
>>> + compatible = "samsung,clock-xusbxti";
>>> + clock-frequency = <24000000>;
>>> + };
>>> + };
>>> +
>>> + thermal-zones {
>>> + cpu_thermal: cpu-thermal {
>>> + cooling-maps {
>>> + map0 {
>>> + /* Corresponds to 800MHz */
>>> + cooling-device = <&cpu0 2 2>;
>>> + };
>>> + map1 {
>>> + /* Corresponds to 200MHz */
>>> + cooling-device = <&cpu0 4 4>;
>>> + };
>>> + };
>>> + };
>>> + };
>>> +
>>> +};
>>> +
>>> +&camera {
>>> + status = "okay";
>>> +};
>>> +
>>> +&cpu0 {
>>> + cpu0-supply = <&varm_breg>;
>>> +};
>>> +
>>> +&exynos_usbphy {
>>> + status = "okay";
>>> +
>>> + vbus-supply = <&safe1_sreg>;
>>> +};
>>> +
>>> +&fimc_0 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC0>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimc_1 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC1>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimc_2 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC2>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimc_3 {
>>> + status = "okay";
>>> +
>>> + assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock
>>> \x7f\x7fCLK_SCLK_FIMC3>;
>>> + assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
>>> + assigned-clock-rates = <0>, <160000000>;
>>> +};
>>> +
>>> +&fimd {
>>> + status = "okay";
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + samsung,invert-vden;
>>> + samsung,invert-vclk;
>>> +
>>> + pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
>>> + pinctrl-names = "default";
>>> +
>>> + port@3 {
>>> + reg = <3>;
>>> +
>>> + fimd_dpi_ep: endpoint {
>>> + remote-endpoint = <&lcd_ep>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&hsotg {
>>> + status = "okay";
>>> +
>>> + dr_mode = "otg";
>> The the host mode really works with DWC2? Afair the host mode worked
>> only when it was rerouted by PHY to the EHCI (at least on
>> \x7fUniversalC210
>> board, which is very similar to GS2).
>
> I have to say that I didn't try OTG / host, but it does work fine in
> gadget mode.
> I can change it to dr_mode = "peripheral" for now, if you prefer.
>
>>> + vusb_d-supply = <&vusb_reg>;
>>> + vusb_a-supply = <&vusbdac_reg>;
>>> +};
>>> +
>>> +&ehci {
>>> + status = "okay";
>>> +
>>> + port@0 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@1 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@2 {
>>> + status = "okay";
>>> + };
>>> +};
>>
>> This is the old, obsolete exynos-ehci binding. Please remove 'port'
>> nodes and use standard USB phy bindings like it has been done in the
>> following patch: https://patchwork.kernel.org/patch/11060465/
>
> Will do.
>
>> BTW, do you really need all 3 phys/ports?
>
> No idea!
>
>>> +
>>> +
>>> +&i2c_3 {
>>> + status = "okay";
>>> +
>>> + samsung,i2c-sda-delay = <100>;
>>> + samsung,i2c-slave-addr = <0x10>;
>>> + samsung,i2c-max-bus-freq = <100000>;
>>> +
>>> + pinctrl-0 = <&i2c3_bus>;
>>> + pinctrl-names = "default";
>>> +
>>> + mxt224-touchscreen@4a {
>>> + compatible = "atmel,maxtouch";
>>> + reg = <0x4a>;
>>> +
>>> + interrupt-parent = <&gpx0>;
>>> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
>>> +
>>> + avdd-supply = <&tsp_reg>;
>>> + vdd-supply = <&tsp_reg>;
>>> + };
>>> +};
>>> +
>>> +&i2c_7 {
>>> + status = "okay";
>>> +
>>> + samsung,i2c-sda-delay = <100>;
>>> + samsung,i2c-slave-addr = <0x10>;
>>> + samsung,i2c-max-bus-freq = <400000>;
>>> +
>>> + pinctrl-0 = <&i2c7_bus>;
>>> + pinctrl-names = "default";
>>> +
>>> + ak8975@c {
>>> + compatible = "asahi-kasei,ak8975";
>>> + reg = <0x0c>;
>>> +
>>> + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
>>> + };
>>> +};
>>> +
>>> +
>>> +&i2c_5 {
>>> + status = "okay";
>>> +
>>> + samsung,i2c-sda-delay = <100>;
>>> + samsung,i2c-slave-addr = <0x10>;
>>> + samsung,i2c-max-bus-freq = <100000>;
>>> +
>>> + pinctrl-0 = <&i2c5_bus>;
>>> + pinctrl-names = "default";
>>> +
>>> + max8997_pmic@66 {
>>> + compatible = "maxim,max8997-pmic";
>>> + reg = <0x66>;
>>> +
>>> + interrupts-extended = <&gpx0 7 0>, <&gpx2 3 2>;
>>> + interrupt-parent = <&gpx0>;
>>> + interrupts = <7 IRQ_TYPE_NONE>;
>>> +
>>> + otg_en-gpios = <&gpx3 3 0>;
>>> + usb_sel-gpios = <&gpl0 6 0>;
>>> +
>>> + max8997,pmic-buck1-uses-gpio-dvs;
>>> + max8997,pmic-buck2-uses-gpio-dvs;
>>> + max8997,pmic-buck5-uses-gpio-dvs;
>>> +
>>> + max8997,pmic-ignore-gpiodvs-side-effect;
>>> + max8997,pmic-buck125-default-dvs-idx = <0>;
>>> +
>>> + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
>>> + <&gpx0 6 GPIO_ACTIVE_HIGH>,
>>> + <&gpl0 0 GPIO_ACTIVE_HIGH>;
>>> +
>>> + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
>>> + <1250000>, <1200000>,
>>> + <1150000>, <1100000>,
>>> + <1000000>, <950000>;
>>> +
>>> + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
>>> + <950000>, <900000>,
>>> + <1100000>, <1000000>,
>>> + <950000>, <900000>;
>>> +
>>> + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
>>> + <1200000>, <1200000>,
>>> + <1200000>, <1200000>,
>>> + <1200000>, <1200000>;
>>> +
>>> + pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
>>> + pinctrl-names = "default";
>>> +
>>> + regulators {
>>> + vadc_reg: LDO1 {
>>> + regulator-name = "VADC_3.3V_C210";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + regulator-always-on;
>>> +
>>> + };
>>> + valive_reg: LDO2 {
>>> + regulator-name = "VALIVE_1.1V_C210";
>>> + regulator-min-microvolt = <1100000>;
>>> + regulator-max-microvolt = <1100000>;
>>> + regulator-always-on;
>>> +
>>> + };
>>> +
>>> + vusb_reg: LDO3 {
>>> + regulator-name = "VUSB_1.1V_C210";
>>> + regulator-min-microvolt = <1100000>;
>>> + regulator-max-microvolt = <1100000>;
>>> + };
>>> +
>>> + vmipi_reg: LDO4 {
>>> + regulator-name = "VMIPI_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vhsic_reg: LDO5 {
>>> + regulator-name = "VHSIC_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vpda_reg: LDO6 {
>>> + regulator-name = "VCC_1.8V_PDA";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vcam_reg: LDO7 {
>>> + regulator-name = "CAM_ISP_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> +
>>> + vusbdac_reg: LDO8 {
>>> + regulator-name = "VUSB+VDAC_3.3V_C210";
>>> + regulator-min-microvolt = <3300000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + };
>>> +
>>> + vccpda_reg: LDO9 {
>>> + regulator-name = "VCC_2.8V_PDA";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vtouch_reg: LDO11 {
>>> + regulator-name = "TOUCH_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vpll_reg: LDO10 {
>>> + regulator-name = "VPLL_1.1V";
>>> + regulator-min-microvolt = <1100000>;
>>> + regulator-max-microvolt = <1100000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vtcam_reg: LDO12 {
>>> + regulator-name = "VT_CAM_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> +
>>> + vcclcd_reg: LDO13 {
>>> + regulator-name = "VCC_3.0V_LCD";
>>> + regulator-min-microvolt = <3000000>;
>>> + regulator-max-microvolt = <3000000>;
>>> + };
>>> +
>>> + vmotor_reg: LDO14 {
>>> + regulator-name = "VCC_2.8V_MOTOR";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + };
>>> +
>>> + vled_reg: LDO15 {
>>> + regulator-name = "LED_A_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + };
>>> +
>>> + camsensor_reg: LDO16 {
>>> + regulator-name = "CAM_SENSOR_IO_1.8V";
>>> + regulator-min-microvolt = <1800000>;
>>> + regulator-max-microvolt = <1800000>;
>>> + };
>>> +
>>> + vtf_reg: LDO17 {
>>> + regulator-name = "VTF_2.8V";
>>> + regulator-min-microvolt = <2800000>;
>>> + regulator-max-microvolt = <2800000>;
>>> + };
>>> +
>>> + vtouchled_reg: LDO18 {
>>> + regulator-name = "TOUCH_LED_3.3V";
>>> + regulator-min-microvolt = <2500000>;
>>> + regulator-max-microvolt = <3300000>;
>>> + };
>>> +
>>> + vddq_reg: LDO21 {
>>> + regulator-name = "VDDQ_M1M2_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + varm_breg: BUCK1 {
>>> + //regulator-name = "VARM_1.2V_C210";
>>> + regulator-name = "vdd_arm";
>>> + regulator-min-microvolt = <65000>;
>>> + regulator-max-microvolt = <2225000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vint_breg: BUCK2 {
>>> + regulator-name = "VINT_1.1V_C210";
>>> + regulator-min-microvolt = <65000>;
>>> + regulator-max-microvolt = <2225000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vg3d_breg: BUCK3 {
>>> + regulator-name = "G3D_1.1V";
>>> + regulator-min-microvolt = <900000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + camisp_breg: BUCK4 {
>>> + regulator-name = "CAM_ISP_CORE_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + };
>>> +
>>> + vmem_breg: BUCK5 {
>>> + regulator-name = "VMEM_1.2V";
>>> + regulator-min-microvolt = <1200000>;
>>> + regulator-max-microvolt = <1200000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + vccsub_breg: BUCK7 {
>>> + regulator-name = "VCC_SUB_2.0V";
>>> + regulator-min-microvolt = <2000000>;
>>> + regulator-max-microvolt = <2000000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + safe1_sreg: ESAFEOUT1 {
>>> + regulator-name = "SAFEOUT1";
>>> + };
>>> +
>>> + safe2_sreg: ESAFEOUT2 {
>>> + regulator-name = "SAFEOUT2";
>>> + regulator-boot-on;
>>> + };
>>> +
>>> + charger_reg: CHARGER {
>>> + regulator-name = "CHARGER";
>>> + regulator-min-microamp = <60000>;
>>> + regulator-max-microamp = <2580000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + chargercv_reg: CHARGER_CV {
>>> + regulator-name = "CHARGER_CV";
>>> + regulator-min-microvolt = <3800000>;
>>> + regulator-max-microvolt = <4100000>;
>>> + regulator-always-on;
>>> + };
>>> +
>>> + };
>>> +
>>> + };
>>> +};
>>> +
>>> +
>>> +&gpu {
>>> + status = "okay";
>>> +
>>> + mali-supply = <&vg3d_breg>;
>>> + regulator-microvolt-offset = <50000>;
>>> + regulator-microsecs-delay = <50>;
>>> +};
>>> +
>>> +
>>> +&sdhci_0 {
>>> + status = "okay";
>>> +
>>> + bus-width = <8>;
>>> + non-removable;
>>> + vmmc-supply = <&vemmc_reg>;
>>> +
>>> + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
>>> + pinctrl-names = "default";
>>> +};
>>> +
>>> +&sdhci_2 {
>>> + status = "okay";
>>> +
>>> + bus-width = <4>;
>>> + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
>>> + vmmc-supply = <&vtf_reg>;
>>> +
>>> + pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
>>> + pinctrl-names = "default";
>>> +};
>>> +
>>> +&ehci {
>>> + port@0 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@1 {
>>> + status = "okay";
>>> + };
>>> +
>>> + port@2 {
>>> + status = "okay";
>>> + };
>>> +
>>> +};
>>
>> This is duplicated 'ehci' node, probable an artifact from the earlier
>> rebase. Please remove it.
>
> Right, didn't even notice it.
>
> Will remove it and send a V2.
>
> Cheers,
> -Paul
>
>>> +
>>> +
>>> +&sdhci_3 {
>>> + status = "okay";
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + non-removable;
>>> + bus-width = <4>;
>>> + mmc-pwrseq = <&wlan_pwrseq>;
>>> + vmmc-supply = <&vtf_reg>;
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
>>> +
>>> + brcmf: wifi@1 {
>>> + compatible = "brcm,bcm4330-fmac";
>>> + reg = <1>;
>>> +
>>> + interrupt-parent = <&gpx2>;
>>> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-names = "host-wake";
>>> + };
>>> +};
>>> +
>>> +
>>> +&serial_0 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
>>> +
>>> + bluetooth {
>>> + compatible = "brcm,bcm4330-bt";
>>> +
>>> + shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
>>> + reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
>>> + device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
>>> + host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
>>> + };
>>> +};
>>> +
>>> +&serial_1 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&serial_2 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&serial_3 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&tmu {
>>> + status = "okay";
>>> +};
>>> +
>>> +
>>> +&pinctrl_0 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&sleep0>;
>>> +
>>> +
>>> + sleep0: sleep-states {
>>> + gpa0-0 {
>>> + samsung,pins = "gpa0-0";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + gpa0-1 {
>>> + samsung,pins = "gpa0-1";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + gpa0-2 {
>>> + samsung,pins = "gpa0-2";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + gpa0-3 {
>>> + samsung,pins = "gpa0-3";
>>> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
>>> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&pinctrl_1 {
>>> + mhl_int: mhl-int {
>>> + samsung,pins = "gpf3-5";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + i2c_mhl_bus: i2c-mhl-bus {
>>> + samsung,pins = "gpf0-4", "gpf0-6";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>>> + };
>>> +
>>> + usb_sel: usb-sel {
>>> + samsung,pins = "gpl0-6";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> + bt_en: bt-en {
>>> + samsung,pins = "gpl0-4";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> + bt_res: bt-res {
>>> + samsung,pins = "gpl1-0";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> +
>>> + otg_gp: otg-gp {
>>> + samsung,pins = "gpx3-3";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>>> + samsung,pin-val = <0>;
>>> + };
>>> +
>>> + mag_mhl_gpio: mag-mhl-gpio {
>>> + samsung,pins = "gpd0-2";
>>> + samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> +
>>> + max8997_irq: max8997-irq {
>>> + samsung,pins = "gpx0-7";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + max17042_fuel_irq: max17042-fuel-irq {
>>> + samsung,pins = "gpx2-3";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>>> + };
>>> +
>>> + tsp224_irq: tsp224-irq {
>>> + samsung,pins = "gpx0-4";
>>> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
>>> + };
>>> +};
>>
>> Best regards
>> --
>> Marek Szyprowski, PhD
>> Samsung R&D Institute Poland
>>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-13 14:37 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-12 15:34 [PATCH 1/2] dt-bindings: arm/samsung: Add compatible string for the Galaxy S2 Paul Cercueil
2020-03-12 15:34 ` Paul Cercueil
2020-03-12 15:34 ` [PATCH 2/2] ARM: DTS: Add devicetree file " Paul Cercueil
2020-03-12 15:34 ` Paul Cercueil
2020-03-13 8:03 ` Marek Szyprowski
2020-03-13 8:03 ` Marek Szyprowski
2020-03-13 14:29 ` Paul Cercueil
2020-03-13 14:29 ` Paul Cercueil
2020-03-13 14:36 ` Paul Cercueil [this message]
2020-03-13 14:36 ` Paul Cercueil
2020-03-13 9:00 ` Krzysztof Kozlowski
2020-03-13 9:00 ` Krzysztof Kozlowski
2020-03-13 14:33 ` Paul Cercueil
2020-03-13 14:33 ` Paul Cercueil
2020-03-13 15:24 ` Marek Szyprowski
2020-03-13 15:24 ` Marek Szyprowski
2020-03-18 14:25 ` Paul Cercueil
[not found] ` <20200318142543.C167520772@mail.kernel.org>
2020-03-18 15:23 ` Krzysztof Kozlowski
2020-03-18 15:23 ` Krzysztof Kozlowski
[not found] ` <CGME20200318142549eucas1p1793027850923ebad20b4691cba676671@eucas1p1.samsung.com>
[not found] ` <D6.31.03891.A6F227E5@epmailinsp8.samsung.com>
2020-03-31 5:36 ` Marek Szyprowski
2020-03-31 5:36 ` Marek Szyprowski
2020-03-31 13:09 ` Paul Cercueil
2020-03-31 13:09 ` Paul Cercueil
2020-03-31 13:55 ` Marek Szyprowski
2020-03-31 13:55 ` Marek Szyprowski
2020-03-31 15:29 ` Paweł Chmiel
2020-03-31 15:29 ` Paweł Chmiel
2020-03-31 19:29 ` Marek Szyprowski
2020-03-31 19:29 ` Marek Szyprowski
2020-03-31 19:50 ` Paweł Chmiel
2020-03-31 19:50 ` Paweł Chmiel
2020-04-01 10:42 ` Marek Szyprowski
2020-04-01 10:42 ` Marek Szyprowski
2020-03-13 8:29 ` [PATCH 1/2] dt-bindings: arm/samsung: Add compatible string " Krzysztof Kozlowski
2020-03-13 8:29 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1584110211.3.2@crapouillou.net \
--to=paul@crapouillou.net \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=stenkinevgeniy@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.