[PATCH v14 0/9] Add support for ipq8064 tsens

[PATCH v14 0/9] Add support for ipq8064 tsens

[Ansuel Smith]

This patchset convert msm8960 to reg_filed, use int_common instead 
of a custom function and fix wrong tsens get_temp function for msm8960.
Ipq8064 SoCs tsens driver is based on 8960 tsens driver. Ipq8064 needs
to be registered as a gcc child as the tsens regs on this platform are
shared with the controller.
This is based on work and code here
https://git.linaro.org/people/amit.kucheria/kernel.git/log/?h=wrk3/tsens-8960-breakage

v14:
* Fix warning reported by Dan Carpenter
v13:
* Simple reword
v12:
* Even more fix reported by Thara
v11:
* Address comments from Thara (thx)
v10:
* Fix wrong tsens init for ver_0 (crit_trips needs to be set in tsens_register)
v9:
* Fix warning from Documentation bot
v8:
* Drop MIN and MAX THRESH and use CRIT_THRESH instead
* Fix broken documentation patch
v7:
* Rework calibrate function to use get_temp_common
* Fix wrong required in the Documentation for ipq8064
* Fix hardware bug in sensor enable function
v6:
* Fix spelling error (can't find the problem with variable misallignment)
* Rework big if-else
* Remove extra comments
* Add description about different interrupts
v5:
* Conver driver to use reg_fiedl
* Use init_common 
* Drop custom set_trip and set_interrupt
* Use common set_trip and set_interrupt
* Fix bad get_temp function
* Add missing hardcoded slope
v4:
* Fix compilation error and warning reported by the bot
v3:
* Change driver to register as child instead of use phandle
v2:
* Fix dt-bindings problems

Ansuel Smith (9):
  drivers: thermal: tsens: Add VER_0 tsens version
  drivers: thermal: tsens: Don't hardcode sensor slope
  drivers: thermal: tsens: Convert msm8960 to reg_field
  drivers: thermal: tsens: Use init_common for msm8960
  drivers: thermal: tsens: Fix bug in sensor enable for msm8960
  drivers: thermal: tsens: Replace custom 8960 apis with generic apis
  drivers: thermal: tsens: Drop unused define for msm8960
  drivers: thermal: tsens: Add support for ipq8064-tsens
  dt-bindings: thermal: tsens: Document ipq8064 bindings

 .../bindings/thermal/qcom-tsens.yaml          |  56 ++++-
 drivers/thermal/qcom/tsens-8960.c             | 233 +++++++++---------
 drivers/thermal/qcom/tsens.c                  | 156 +++++++++---
 drivers/thermal/qcom/tsens.h                  |   4 +-
 4 files changed, 292 insertions(+), 157 deletions(-)

-- 
2.30.2

[PATCH v14 1/9] drivers: thermal: tsens: Add VER_0 tsens version

[Ansuel Smith]

VER_0 is used to describe device based on tsens version before v0.1.
These device are devices based on msm8960 for example apq8064 or
ipq806x.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/thermal/qcom/tsens.c | 150 ++++++++++++++++++++++++++++-------
 drivers/thermal/qcom/tsens.h |   4 +-
 2 files changed, 124 insertions(+), 30 deletions(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index d8ce3a687b80..9a7e991d4bd2 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
@@ -515,6 +516,15 @@ static irqreturn_t tsens_irq_thread(int irq, void *data)
 			dev_dbg(priv->dev, "[%u] %s: no violation:  %d\n",
 				hw_id, __func__, temp);
 		}
+
+		if (tsens_version(priv) < VER_0_1) {
+			/* Constraint: There is only 1 interrupt control register for all
+			 * 11 temperature sensor. So monitoring more than 1 sensor based
+			 * on interrupts will yield inconsistent result. To overcome this
+			 * issue we will monitor only sensor 0 which is the master sensor.
+			 */
+			break;
+		}
 	}
 
 	return IRQ_HANDLED;
@@ -530,6 +540,13 @@ static int tsens_set_trips(void *_sensor, int low, int high)
 	int high_val, low_val, cl_high, cl_low;
 	u32 hw_id = s->hw_id;
 
+	if (tsens_version(priv) < VER_0_1) {
+		/* Pre v0.1 IP had a single register for each type of interrupt
+		 * and thresholds
+		 */
+		hw_id = 0;
+	}
+
 	dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
 		hw_id, __func__, low, high);
 
@@ -584,18 +601,21 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
 	u32 valid;
 	int ret;
 
-	ret = regmap_field_read(priv->rf[valid_idx], &valid);
-	if (ret)
-		return ret;
-	while (!valid) {
-		/* Valid bit is 0 for 6 AHB clock cycles.
-		 * At 19.2MHz, 1 AHB clock is ~60ns.
-		 * We should enter this loop very, very rarely.
-		 */
-		ndelay(400);
+	/* VER_0 doesn't have VALID bit */
+	if (tsens_version(priv) >= VER_0_1) {
 		ret = regmap_field_read(priv->rf[valid_idx], &valid);
 		if (ret)
 			return ret;
+		while (!valid) {
+			/* Valid bit is 0 for 6 AHB clock cycles.
+			 * At 19.2MHz, 1 AHB clock is ~60ns.
+			 * We should enter this loop very, very rarely.
+			 */
+			ndelay(400);
+			ret = regmap_field_read(priv->rf[valid_idx], &valid);
+			if (ret)
+				return ret;
+		}
 	}
 
 	/* Valid bit is set, OK to read the temperature */
@@ -608,15 +628,29 @@ int get_temp_common(const struct tsens_sensor *s, int *temp)
 {
 	struct tsens_priv *priv = s->priv;
 	int hw_id = s->hw_id;
-	int last_temp = 0, ret;
+	int last_temp = 0, ret, trdy;
+	unsigned long timeout;
 
-	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
-	if (ret)
-		return ret;
+	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+	do {
+		if (tsens_version(priv) == VER_0) {
+			ret = regmap_field_read(priv->rf[TRDY], &trdy);
+			if (ret)
+				return ret;
+			if (!trdy)
+				continue;
+		}
 
-	*temp = code_to_degc(last_temp, s) * 1000;
+		ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
+		if (ret)
+			return ret;
 
-	return 0;
+		*temp = code_to_degc(last_temp, s) * 1000;
+
+		return 0;
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
 }
 
 #ifdef CONFIG_DEBUG_FS
@@ -738,19 +772,34 @@ int __init init_common(struct tsens_priv *priv)
 		priv->tm_offset = 0x1000;
 	}
 
-	res = platform_get_resource(op, IORESOURCE_MEM, 0);
-	tm_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(tm_base)) {
-		ret = PTR_ERR(tm_base);
-		goto err_put_device;
+	if (tsens_version(priv) >= VER_0_1) {
+		res = platform_get_resource(op, IORESOURCE_MEM, 0);
+		tm_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(tm_base)) {
+			ret = PTR_ERR(tm_base);
+			goto err_put_device;
+		}
+
+		priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
+	} else { /* VER_0 share the same gcc regs using a syscon */
+		struct device *parent = priv->dev->parent;
+
+		if (parent)
+			priv->tm_map = syscon_node_to_regmap(parent->of_node);
 	}
 
-	priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
-	if (IS_ERR(priv->tm_map)) {
-		ret = PTR_ERR(priv->tm_map);
+	if (IS_ERR_OR_NULL(priv->tm_map)) {
+		if (!priv->tm_map)
+			ret = -ENODEV;
+		else
+			ret = PTR_ERR(priv->tm_map);
 		goto err_put_device;
 	}
 
+	/* VER_0 have only tm_map */
+	if (!priv->srot_map)
+		priv->srot_map = priv->tm_map;
+
 	if (tsens_version(priv) > VER_0_1) {
 		for (i = VER_MAJOR; i <= VER_STEP; i++) {
 			priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
@@ -769,6 +818,10 @@ int __init init_common(struct tsens_priv *priv)
 		ret = PTR_ERR(priv->rf[TSENS_EN]);
 		goto err_put_device;
 	}
+	/* in VER_0 TSENS need to be explicitly enabled */
+	if (tsens_version(priv) == VER_0)
+		regmap_field_write(priv->rf[TSENS_EN], 1);
+
 	ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
 	if (ret)
 		goto err_put_device;
@@ -791,6 +844,19 @@ int __init init_common(struct tsens_priv *priv)
 		goto err_put_device;
 	}
 
+	priv->rf[TSENS_SW_RST] =
+		devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]);
+	if (IS_ERR(priv->rf[TSENS_SW_RST])) {
+		ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
+		goto err_put_device;
+	}
+
+	priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
+	if (IS_ERR(priv->rf[TRDY])) {
+		ret = PTR_ERR(priv->rf[TRDY]);
+		goto err_put_device;
+	}
+
 	/* This loop might need changes if enum regfield_ids is reordered */
 	for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
 		for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -806,7 +872,7 @@ int __init init_common(struct tsens_priv *priv)
 		}
 	}
 
-	if (priv->feat->crit_int) {
+	if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
 		/* Loop might need changes if enum regfield_ids is reordered */
 		for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
 			for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -844,7 +910,11 @@ int __init init_common(struct tsens_priv *priv)
 	}
 
 	spin_lock_init(&priv->ul_lock);
-	tsens_enable_irq(priv);
+
+	/* VER_0 interrupt doesn't need to be enabled */
+	if (tsens_version(priv) >= VER_0_1)
+		tsens_enable_irq(priv);
+
 	tsens_debug_init(op);
 
 err_put_device:
@@ -943,10 +1013,19 @@ static int tsens_register_irq(struct tsens_priv *priv, char *irqname,
 		if (irq == -ENXIO)
 			ret = 0;
 	} else {
-		ret = devm_request_threaded_irq(&pdev->dev, irq,
-						NULL, thread_fn,
-						IRQF_ONESHOT,
-						dev_name(&pdev->dev), priv);
+		/* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
+		if (tsens_version(priv) == VER_0)
+			ret = devm_request_threaded_irq(&pdev->dev, irq,
+							thread_fn, NULL,
+							IRQF_TRIGGER_RISING,
+							dev_name(&pdev->dev),
+							priv);
+		else
+			ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+							thread_fn, IRQF_ONESHOT,
+							dev_name(&pdev->dev),
+							priv);
+
 		if (ret)
 			dev_err(&pdev->dev, "%s: failed to get irq\n",
 				__func__);
@@ -975,6 +1054,19 @@ static int tsens_register(struct tsens_priv *priv)
 			priv->ops->enable(priv, i);
 	}
 
+	/* VER_0 require to set MIN and MAX THRESH
+	 * These 2 regs are set using the:
+	 * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
+	 * - CRIT_THRESH_1 for MIN THRESH hardcoded to   0°C
+	 */
+	if (tsens_version(priv) < VER_0_1) {
+		regmap_field_write(priv->rf[CRIT_THRESH_0],
+				   tsens_mC_to_hw(priv->sensor, 120000));
+
+		regmap_field_write(priv->rf[CRIT_THRESH_1],
+				   tsens_mC_to_hw(priv->sensor, 0));
+	}
+
 	ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index f40b625f897e..8e6c1fd3ccf5 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -13,6 +13,7 @@
 #define CAL_DEGC_PT2		120
 #define SLOPE_FACTOR		1000
 #define SLOPE_DEFAULT		3200
+#define TIMEOUT_US		100
 #define THRESHOLD_MAX_ADC_CODE	0x3ff
 #define THRESHOLD_MIN_ADC_CODE	0x0
 
@@ -25,7 +26,8 @@ struct tsens_priv;
 
 /* IP version numbers in ascending order */
 enum tsens_ver {
-	VER_0_1 = 0,
+	VER_0 = 0,
+	VER_0_1,
 	VER_1_X,
 	VER_2_X,
 };
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Add VER_0 tsens version

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     60f2ae7ca0dd849df3e959ce18c5c09c194d91ba
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//60f2ae7ca0dd849df3e959ce18c5c09c194d91ba
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:15 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:42 +02:00

thermal/drivers/tsens: Add VER_0 tsens version

VER_0 is used to describe device based on tsens version before v0.1.
These device are devices based on msm8960 for example apq8064 or
ipq806x.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-2-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens.c | 150 +++++++++++++++++++++++++++-------
 drivers/thermal/qcom/tsens.h |   4 +-
 2 files changed, 124 insertions(+), 30 deletions(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3c4c051..124384c 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
@@ -515,6 +516,15 @@ static irqreturn_t tsens_irq_thread(int irq, void *data)
 			dev_dbg(priv->dev, "[%u] %s: no violation:  %d\n",
 				hw_id, __func__, temp);
 		}
+
+		if (tsens_version(priv) < VER_0_1) {
+			/* Constraint: There is only 1 interrupt control register for all
+			 * 11 temperature sensor. So monitoring more than 1 sensor based
+			 * on interrupts will yield inconsistent result. To overcome this
+			 * issue we will monitor only sensor 0 which is the master sensor.
+			 */
+			break;
+		}
 	}
 
 	return IRQ_HANDLED;
@@ -530,6 +540,13 @@ static int tsens_set_trips(void *_sensor, int low, int high)
 	int high_val, low_val, cl_high, cl_low;
 	u32 hw_id = s->hw_id;
 
+	if (tsens_version(priv) < VER_0_1) {
+		/* Pre v0.1 IP had a single register for each type of interrupt
+		 * and thresholds
+		 */
+		hw_id = 0;
+	}
+
 	dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
 		hw_id, __func__, low, high);
 
@@ -584,18 +601,21 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
 	u32 valid;
 	int ret;
 
-	ret = regmap_field_read(priv->rf[valid_idx], &valid);
-	if (ret)
-		return ret;
-	while (!valid) {
-		/* Valid bit is 0 for 6 AHB clock cycles.
-		 * At 19.2MHz, 1 AHB clock is ~60ns.
-		 * We should enter this loop very, very rarely.
-		 */
-		ndelay(400);
+	/* VER_0 doesn't have VALID bit */
+	if (tsens_version(priv) >= VER_0_1) {
 		ret = regmap_field_read(priv->rf[valid_idx], &valid);
 		if (ret)
 			return ret;
+		while (!valid) {
+			/* Valid bit is 0 for 6 AHB clock cycles.
+			 * At 19.2MHz, 1 AHB clock is ~60ns.
+			 * We should enter this loop very, very rarely.
+			 */
+			ndelay(400);
+			ret = regmap_field_read(priv->rf[valid_idx], &valid);
+			if (ret)
+				return ret;
+		}
 	}
 
 	/* Valid bit is set, OK to read the temperature */
@@ -608,15 +628,29 @@ int get_temp_common(const struct tsens_sensor *s, int *temp)
 {
 	struct tsens_priv *priv = s->priv;
 	int hw_id = s->hw_id;
-	int last_temp = 0, ret;
+	int last_temp = 0, ret, trdy;
+	unsigned long timeout;
 
-	ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
-	if (ret)
-		return ret;
+	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+	do {
+		if (tsens_version(priv) == VER_0) {
+			ret = regmap_field_read(priv->rf[TRDY], &trdy);
+			if (ret)
+				return ret;
+			if (!trdy)
+				continue;
+		}
 
-	*temp = code_to_degc(last_temp, s) * 1000;
+		ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
+		if (ret)
+			return ret;
 
-	return 0;
+		*temp = code_to_degc(last_temp, s) * 1000;
+
+		return 0;
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
 }
 
 #ifdef CONFIG_DEBUG_FS
@@ -738,19 +772,34 @@ int __init init_common(struct tsens_priv *priv)
 		priv->tm_offset = 0x1000;
 	}
 
-	res = platform_get_resource(op, IORESOURCE_MEM, 0);
-	tm_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(tm_base)) {
-		ret = PTR_ERR(tm_base);
-		goto err_put_device;
+	if (tsens_version(priv) >= VER_0_1) {
+		res = platform_get_resource(op, IORESOURCE_MEM, 0);
+		tm_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(tm_base)) {
+			ret = PTR_ERR(tm_base);
+			goto err_put_device;
+		}
+
+		priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
+	} else { /* VER_0 share the same gcc regs using a syscon */
+		struct device *parent = priv->dev->parent;
+
+		if (parent)
+			priv->tm_map = syscon_node_to_regmap(parent->of_node);
 	}
 
-	priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
-	if (IS_ERR(priv->tm_map)) {
-		ret = PTR_ERR(priv->tm_map);
+	if (IS_ERR_OR_NULL(priv->tm_map)) {
+		if (!priv->tm_map)
+			ret = -ENODEV;
+		else
+			ret = PTR_ERR(priv->tm_map);
 		goto err_put_device;
 	}
 
+	/* VER_0 have only tm_map */
+	if (!priv->srot_map)
+		priv->srot_map = priv->tm_map;
+
 	if (tsens_version(priv) > VER_0_1) {
 		for (i = VER_MAJOR; i <= VER_STEP; i++) {
 			priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
@@ -771,6 +820,10 @@ int __init init_common(struct tsens_priv *priv)
 		ret = PTR_ERR(priv->rf[TSENS_EN]);
 		goto err_put_device;
 	}
+	/* in VER_0 TSENS need to be explicitly enabled */
+	if (tsens_version(priv) == VER_0)
+		regmap_field_write(priv->rf[TSENS_EN], 1);
+
 	ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
 	if (ret)
 		goto err_put_device;
@@ -793,6 +846,19 @@ int __init init_common(struct tsens_priv *priv)
 		goto err_put_device;
 	}
 
+	priv->rf[TSENS_SW_RST] =
+		devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]);
+	if (IS_ERR(priv->rf[TSENS_SW_RST])) {
+		ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
+		goto err_put_device;
+	}
+
+	priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
+	if (IS_ERR(priv->rf[TRDY])) {
+		ret = PTR_ERR(priv->rf[TRDY]);
+		goto err_put_device;
+	}
+
 	/* This loop might need changes if enum regfield_ids is reordered */
 	for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
 		for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -808,7 +874,7 @@ int __init init_common(struct tsens_priv *priv)
 		}
 	}
 
-	if (priv->feat->crit_int) {
+	if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
 		/* Loop might need changes if enum regfield_ids is reordered */
 		for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
 			for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -846,7 +912,11 @@ int __init init_common(struct tsens_priv *priv)
 	}
 
 	spin_lock_init(&priv->ul_lock);
-	tsens_enable_irq(priv);
+
+	/* VER_0 interrupt doesn't need to be enabled */
+	if (tsens_version(priv) >= VER_0_1)
+		tsens_enable_irq(priv);
+
 	tsens_debug_init(op);
 
 err_put_device:
@@ -945,10 +1015,19 @@ static int tsens_register_irq(struct tsens_priv *priv, char *irqname,
 		if (irq == -ENXIO)
 			ret = 0;
 	} else {
-		ret = devm_request_threaded_irq(&pdev->dev, irq,
-						NULL, thread_fn,
-						IRQF_ONESHOT,
-						dev_name(&pdev->dev), priv);
+		/* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
+		if (tsens_version(priv) == VER_0)
+			ret = devm_request_threaded_irq(&pdev->dev, irq,
+							thread_fn, NULL,
+							IRQF_TRIGGER_RISING,
+							dev_name(&pdev->dev),
+							priv);
+		else
+			ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+							thread_fn, IRQF_ONESHOT,
+							dev_name(&pdev->dev),
+							priv);
+
 		if (ret)
 			dev_err(&pdev->dev, "%s: failed to get irq\n",
 				__func__);
@@ -977,6 +1056,19 @@ static int tsens_register(struct tsens_priv *priv)
 			priv->ops->enable(priv, i);
 	}
 
+	/* VER_0 require to set MIN and MAX THRESH
+	 * These 2 regs are set using the:
+	 * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
+	 * - CRIT_THRESH_1 for MIN THRESH hardcoded to   0°C
+	 */
+	if (tsens_version(priv) < VER_0_1) {
+		regmap_field_write(priv->rf[CRIT_THRESH_0],
+				   tsens_mC_to_hw(priv->sensor, 120000));
+
+		regmap_field_write(priv->rf[CRIT_THRESH_1],
+				   tsens_mC_to_hw(priv->sensor, 0));
+	}
+
 	ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index f40b625..8e6c1fd 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -13,6 +13,7 @@
 #define CAL_DEGC_PT2		120
 #define SLOPE_FACTOR		1000
 #define SLOPE_DEFAULT		3200
+#define TIMEOUT_US		100
 #define THRESHOLD_MAX_ADC_CODE	0x3ff
 #define THRESHOLD_MIN_ADC_CODE	0x0
 
@@ -25,7 +26,8 @@ struct tsens_priv;
 
 /* IP version numbers in ascending order */
 enum tsens_ver {
-	VER_0_1 = 0,
+	VER_0 = 0,
+	VER_0_1,
 	VER_1_X,
 	VER_2_X,
 };

[PATCH v14 2/9] drivers: thermal: tsens: Don't hardcode sensor slope

[Ansuel Smith]

Function compute_intercept_slope hardcode the sensor slope to
SLOPE_DEFAULT. Change this and use the default value only if a slope is
not defined. This is needed for tsens VER_0 that has a hardcoded slope
table.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 9a7e991d4bd2..38b9936def1a 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -86,7 +86,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 			"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
 			__func__, i, p1[i], p2[i]);
 
-		priv->sensor[i].slope = SLOPE_DEFAULT;
+		if (!priv->sensor[i].slope)
+			priv->sensor[i].slope = SLOPE_DEFAULT;
 		if (mode == TWO_PT_CALIB) {
 			/*
 			 * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Don't hardcode sensor slope

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     e801d870ffafd03f0e85058cea7a949cb15628f1
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//e801d870ffafd03f0e85058cea7a949cb15628f1
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:16 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:42 +02:00

thermal/drivers/tsens: Don't hardcode sensor slope

Function compute_intercept_slope hardcode the sensor slope to
SLOPE_DEFAULT. Change this and use the default value only if a slope is
not defined. This is needed for tsens VER_0 that has a hardcoded slope
table.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-3-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 124384c..54382c6 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -86,7 +86,8 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 			"%s: sensor%d - data_point1:%#x data_point2:%#x\n",
 			__func__, i, p1[i], p2[i]);
 
-		priv->sensor[i].slope = SLOPE_DEFAULT;
+		if (!priv->sensor[i].slope)
+			priv->sensor[i].slope = SLOPE_DEFAULT;
 		if (mode == TWO_PT_CALIB) {
 			/*
 			 * slope (m) = adc_code2 - adc_code1 (y2 - y1)/

[PATCH v14 3/9] drivers: thermal: tsens: Convert msm8960 to reg_field

[Ansuel Smith]

Convert msm9860 driver to reg_field to use the init_common
function.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c | 80 ++++++++++++++++++++++++++++++-
 1 file changed, 79 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 2a28a5af209e..3f4fc1ffe679 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -51,11 +51,22 @@
 #define MIN_LIMIT_TH		0x0
 #define MAX_LIMIT_TH		0xff
 
-#define S0_STATUS_ADDR		0x3628
 #define INT_STATUS_ADDR		0x363c
 #define TRDY_MASK		BIT(7)
 #define TIMEOUT_US		100
 
+#define S0_STATUS_OFF		0x3628
+#define S1_STATUS_OFF		0x362c
+#define S2_STATUS_OFF		0x3630
+#define S3_STATUS_OFF		0x3634
+#define S4_STATUS_OFF		0x3638
+#define S5_STATUS_OFF		0x3664  /* Sensors 5-10 found on apq8064/msm8960 */
+#define S6_STATUS_OFF		0x3668
+#define S7_STATUS_OFF		0x366c
+#define S8_STATUS_OFF		0x3670
+#define S9_STATUS_OFF		0x3674
+#define S10_STATUS_OFF		0x3678
+
 static int suspend_8960(struct tsens_priv *priv)
 {
 	int ret;
@@ -269,6 +280,71 @@ static int get_temp_8960(const struct tsens_sensor *s, int *temp)
 	return -ETIMEDOUT;
 }
 
+static struct tsens_features tsens_8960_feat = {
+	.ver_major	= VER_0,
+	.crit_int	= 0,
+	.adc		= 1,
+	.srot_split	= 0,
+	.max_sensors	= 11,
+};
+
+static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
+	/* ----- SROT ------ */
+	/* No VERSION information */
+
+	/* CNTL */
+	[TSENS_EN]     = REG_FIELD(CNTL_ADDR,  0, 0),
+	[TSENS_SW_RST] = REG_FIELD(CNTL_ADDR,  1, 1),
+	/* 8960 has 5 sensors, 8660 has 11, we only handle 5 */
+	[SENSOR_EN]    = REG_FIELD(CNTL_ADDR,  3, 7),
+
+	/* ----- TM ------ */
+	/* INTERRUPT ENABLE */
+	/* NO INTERRUPT ENABLE */
+
+	/* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */
+	[LOW_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR,  0,  7),
+	[UP_THRESH_0]    = REG_FIELD(THRESHOLD_ADDR,  8, 15),
+	/* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield
+	 * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp
+	 * MIN_THRESH_0 -> CRIT_THRESH_1
+	 * MAX_THRESH_0 -> CRIT_THRESH_0
+	 */
+	[CRIT_THRESH_1]   = REG_FIELD(THRESHOLD_ADDR, 16, 23),
+	[CRIT_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR, 24, 31),
+
+	/* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */
+	/* 1 == clear, 0 == normal operation */
+	[LOW_INT_CLEAR_0]   = REG_FIELD(CNTL_ADDR,  9,  9),
+	[UP_INT_CLEAR_0]    = REG_FIELD(CNTL_ADDR, 10, 10),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on 8960 */
+
+	/* Sn_STATUS */
+	[LAST_TEMP_0]  = REG_FIELD(S0_STATUS_OFF,  0,  7),
+	[LAST_TEMP_1]  = REG_FIELD(S1_STATUS_OFF,  0,  7),
+	[LAST_TEMP_2]  = REG_FIELD(S2_STATUS_OFF,  0,  7),
+	[LAST_TEMP_3]  = REG_FIELD(S3_STATUS_OFF,  0,  7),
+	[LAST_TEMP_4]  = REG_FIELD(S4_STATUS_OFF,  0,  7),
+	[LAST_TEMP_5]  = REG_FIELD(S5_STATUS_OFF,  0,  7),
+	[LAST_TEMP_6]  = REG_FIELD(S6_STATUS_OFF,  0,  7),
+	[LAST_TEMP_7]  = REG_FIELD(S7_STATUS_OFF,  0,  7),
+	[LAST_TEMP_8]  = REG_FIELD(S8_STATUS_OFF,  0,  7),
+	[LAST_TEMP_9]  = REG_FIELD(S9_STATUS_OFF,  0,  7),
+	[LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0,  7),
+
+	/* No VALID field on 8960 */
+	/* TSENS_INT_STATUS bits: 1 == threshold violated */
+	[MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0),
+	[LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1),
+	[UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2),
+	/* No CRITICAL field on 8960 */
+	[MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3),
+
+	/* TRDY: 1=ready, 0=in progress */
+	[TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7),
+};
+
 static const struct tsens_ops ops_8960 = {
 	.init		= init_8960,
 	.calibrate	= calibrate_8960,
@@ -282,4 +358,6 @@ static const struct tsens_ops ops_8960 = {
 struct tsens_plat_data data_8960 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8960,
+	.feat		= &tsens_8960_feat,
+	.fields		= tsens_8960_regfields,
 };
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     0eb973a50ccce674d157c2256156424dedb57a22
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//0eb973a50ccce674d157c2256156424dedb57a22
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:17 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:42 +02:00

thermal/drivers/tsens: Convert msm8960 to reg_field

Convert msm9860 driver to reg_field to use the init_common
function.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-4-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens-8960.c | 80 +++++++++++++++++++++++++++++-
 1 file changed, 79 insertions(+), 1 deletion(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 2a28a5a..3f4fc1f 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -51,11 +51,22 @@
 #define MIN_LIMIT_TH		0x0
 #define MAX_LIMIT_TH		0xff
 
-#define S0_STATUS_ADDR		0x3628
 #define INT_STATUS_ADDR		0x363c
 #define TRDY_MASK		BIT(7)
 #define TIMEOUT_US		100
 
+#define S0_STATUS_OFF		0x3628
+#define S1_STATUS_OFF		0x362c
+#define S2_STATUS_OFF		0x3630
+#define S3_STATUS_OFF		0x3634
+#define S4_STATUS_OFF		0x3638
+#define S5_STATUS_OFF		0x3664  /* Sensors 5-10 found on apq8064/msm8960 */
+#define S6_STATUS_OFF		0x3668
+#define S7_STATUS_OFF		0x366c
+#define S8_STATUS_OFF		0x3670
+#define S9_STATUS_OFF		0x3674
+#define S10_STATUS_OFF		0x3678
+
 static int suspend_8960(struct tsens_priv *priv)
 {
 	int ret;
@@ -269,6 +280,71 @@ static int get_temp_8960(const struct tsens_sensor *s, int *temp)
 	return -ETIMEDOUT;
 }
 
+static struct tsens_features tsens_8960_feat = {
+	.ver_major	= VER_0,
+	.crit_int	= 0,
+	.adc		= 1,
+	.srot_split	= 0,
+	.max_sensors	= 11,
+};
+
+static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
+	/* ----- SROT ------ */
+	/* No VERSION information */
+
+	/* CNTL */
+	[TSENS_EN]     = REG_FIELD(CNTL_ADDR,  0, 0),
+	[TSENS_SW_RST] = REG_FIELD(CNTL_ADDR,  1, 1),
+	/* 8960 has 5 sensors, 8660 has 11, we only handle 5 */
+	[SENSOR_EN]    = REG_FIELD(CNTL_ADDR,  3, 7),
+
+	/* ----- TM ------ */
+	/* INTERRUPT ENABLE */
+	/* NO INTERRUPT ENABLE */
+
+	/* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */
+	[LOW_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR,  0,  7),
+	[UP_THRESH_0]    = REG_FIELD(THRESHOLD_ADDR,  8, 15),
+	/* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield
+	 * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp
+	 * MIN_THRESH_0 -> CRIT_THRESH_1
+	 * MAX_THRESH_0 -> CRIT_THRESH_0
+	 */
+	[CRIT_THRESH_1]   = REG_FIELD(THRESHOLD_ADDR, 16, 23),
+	[CRIT_THRESH_0]   = REG_FIELD(THRESHOLD_ADDR, 24, 31),
+
+	/* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */
+	/* 1 == clear, 0 == normal operation */
+	[LOW_INT_CLEAR_0]   = REG_FIELD(CNTL_ADDR,  9,  9),
+	[UP_INT_CLEAR_0]    = REG_FIELD(CNTL_ADDR, 10, 10),
+
+	/* NO CRITICAL INTERRUPT SUPPORT on 8960 */
+
+	/* Sn_STATUS */
+	[LAST_TEMP_0]  = REG_FIELD(S0_STATUS_OFF,  0,  7),
+	[LAST_TEMP_1]  = REG_FIELD(S1_STATUS_OFF,  0,  7),
+	[LAST_TEMP_2]  = REG_FIELD(S2_STATUS_OFF,  0,  7),
+	[LAST_TEMP_3]  = REG_FIELD(S3_STATUS_OFF,  0,  7),
+	[LAST_TEMP_4]  = REG_FIELD(S4_STATUS_OFF,  0,  7),
+	[LAST_TEMP_5]  = REG_FIELD(S5_STATUS_OFF,  0,  7),
+	[LAST_TEMP_6]  = REG_FIELD(S6_STATUS_OFF,  0,  7),
+	[LAST_TEMP_7]  = REG_FIELD(S7_STATUS_OFF,  0,  7),
+	[LAST_TEMP_8]  = REG_FIELD(S8_STATUS_OFF,  0,  7),
+	[LAST_TEMP_9]  = REG_FIELD(S9_STATUS_OFF,  0,  7),
+	[LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0,  7),
+
+	/* No VALID field on 8960 */
+	/* TSENS_INT_STATUS bits: 1 == threshold violated */
+	[MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0),
+	[LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1),
+	[UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2),
+	/* No CRITICAL field on 8960 */
+	[MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3),
+
+	/* TRDY: 1=ready, 0=in progress */
+	[TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7),
+};
+
 static const struct tsens_ops ops_8960 = {
 	.init		= init_8960,
 	.calibrate	= calibrate_8960,
@@ -282,4 +358,6 @@ static const struct tsens_ops ops_8960 = {
 struct tsens_plat_data data_8960 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8960,
+	.feat		= &tsens_8960_feat,
+	.fields		= tsens_8960_regfields,
 };

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12288 bytes --]

Hi thermal-bot,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.12-rc7]
[cannot apply to thermal/next next-20210415]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
config: arm-randconfig-r015-20210415 (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
        git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
>> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
     193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
         |                             ^~~~~~~~~~~~~~
         |                             INT_STATUS_ADDR
   drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
   drivers/thermal/qcom/tsens-8960.c: At top level:
>> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
     284 |  .ver_major = VER_0,
         |               ^~~~~
         |               VER_0_1


vim +193 drivers/thermal/qcom/tsens-8960.c

20d4fd84bf524ad Rajendra Nayak               2016-05-05  175  
69b628ac71f07d6 Amit Kucheria                2019-03-20  176  static int init_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  177  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  178  	int ret, i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  179  	u32 reg_cntl;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  180  
69b628ac71f07d6 Amit Kucheria                2019-03-20  181  	priv->tm_map = dev_get_regmap(priv->dev, NULL);
69b628ac71f07d6 Amit Kucheria                2019-03-20  182  	if (!priv->tm_map)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  183  		return -ENODEV;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  184  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  185  	/*
20d4fd84bf524ad Rajendra Nayak               2016-05-05  186  	 * The status registers for each sensor are discontiguous
20d4fd84bf524ad Rajendra Nayak               2016-05-05  187  	 * because some SoCs have 5 sensors while others have more
20d4fd84bf524ad Rajendra Nayak               2016-05-05  188  	 * but the control registers stay in the same place, i.e
20d4fd84bf524ad Rajendra Nayak               2016-05-05  189  	 * directly after the first 5 status registers.
20d4fd84bf524ad Rajendra Nayak               2016-05-05  190  	 */
69b628ac71f07d6 Amit Kucheria                2019-03-20  191  	for (i = 0; i < priv->num_sensors; i++) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  192  		if (i >= 5)
69b628ac71f07d6 Amit Kucheria                2019-03-20 @193  			priv->sensor[i].status = S0_STATUS_ADDR + 40;
69b628ac71f07d6 Amit Kucheria                2019-03-20  194  		priv->sensor[i].status += i * 4;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  195  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  196  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  197  	reg_cntl = SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  198  	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  199  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  200  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  201  
69b628ac71f07d6 Amit Kucheria                2019-03-20  202  	if (priv->num_sensors > 1) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  203  		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  204  		reg_cntl &= ~SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  205  		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
20d4fd84bf524ad Rajendra Nayak               2016-05-05  206  					 CONFIG_MASK, CONFIG);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  207  	} else {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  208  		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  209  		reg_cntl &= ~CONFIG_MASK_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  210  		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  211  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  212  
69b628ac71f07d6 Amit Kucheria                2019-03-20  213  	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
69b628ac71f07d6 Amit Kucheria                2019-03-20  214  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  215  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  216  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  217  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  218  	reg_cntl |= EN;
69b628ac71f07d6 Amit Kucheria                2019-03-20  219  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  220  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  221  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  222  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  223  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  224  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  225  
69b628ac71f07d6 Amit Kucheria                2019-03-20  226  static int calibrate_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  227  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  228  	int i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  229  	char *data;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  230  
69b628ac71f07d6 Amit Kucheria                2019-03-20  231  	ssize_t num_read = priv->num_sensors;
69b628ac71f07d6 Amit Kucheria                2019-03-20  232  	struct tsens_sensor *s = priv->sensor;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  233  
69b628ac71f07d6 Amit Kucheria                2019-03-20  234  	data = qfprom_read(priv->dev, "calib");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  235  	if (IS_ERR(data))
69b628ac71f07d6 Amit Kucheria                2019-03-20  236  		data = qfprom_read(priv->dev, "calib_backup");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  237  	if (IS_ERR(data))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  238  		return PTR_ERR(data);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  239  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  240  	for (i = 0; i < num_read; i++, s++)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  241  		s->offset = data[i];
20d4fd84bf524ad Rajendra Nayak               2016-05-05  242  
6b8249abb093551 Srinivas Kandagatla          2019-08-23  243  	kfree(data);
6b8249abb093551 Srinivas Kandagatla          2019-08-23  244  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  245  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  246  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  247  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  248  /* Temperature on y axis and ADC-code on x-axis */
20d4fd84bf524ad Rajendra Nayak               2016-05-05  249  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  250  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  251  	int slope, offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  252  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  253  	slope = thermal_zone_get_slope(s->tzd);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  254  	offset = CAL_MDEGC - slope * s->offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  255  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  256  	return adc_code * slope + offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  257  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  258  
e604bdd2a7e1087 Amit Kucheria                2020-03-12  259  static int get_temp_8960(const struct tsens_sensor *s, int *temp)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  260  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  261  	int ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  262  	u32 code, trdy;
8b71bce407b3f13 Amit Kucheria                2019-11-01  263  	struct tsens_priv *priv = s->priv;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  264  	unsigned long timeout;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  265  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  266  	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  267  	do {
69b628ac71f07d6 Amit Kucheria                2019-03-20  268  		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  269  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  270  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  271  		if (!(trdy & TRDY_MASK))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  272  			continue;
69b628ac71f07d6 Amit Kucheria                2019-03-20  273  		ret = regmap_read(priv->tm_map, s->status, &code);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  274  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  275  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  276  		*temp = code_to_mdegC(code, s);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  277  		return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  278  	} while (time_before(jiffies, timeout));
20d4fd84bf524ad Rajendra Nayak               2016-05-05  279  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  280  	return -ETIMEDOUT;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  281  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  282  
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  283  static struct tsens_features tsens_8960_feat = {
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15 @284  	.ver_major	= VER_0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  285  	.crit_int	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  286  	.adc		= 1,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  287  	.srot_split	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  288  	.max_sensors	= 11,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  289  };
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  290  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 36618 bytes --]

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12455 bytes --]

Hi thermal-bot,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.12-rc7]
[cannot apply to thermal/next next-20210415]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
config: arm-randconfig-r015-20210415 (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
        git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
>> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
     193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
         |                             ^~~~~~~~~~~~~~
         |                             INT_STATUS_ADDR
   drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
   drivers/thermal/qcom/tsens-8960.c: At top level:
>> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
     284 |  .ver_major = VER_0,
         |               ^~~~~
         |               VER_0_1


vim +193 drivers/thermal/qcom/tsens-8960.c

20d4fd84bf524ad Rajendra Nayak               2016-05-05  175  
69b628ac71f07d6 Amit Kucheria                2019-03-20  176  static int init_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  177  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  178  	int ret, i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  179  	u32 reg_cntl;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  180  
69b628ac71f07d6 Amit Kucheria                2019-03-20  181  	priv->tm_map = dev_get_regmap(priv->dev, NULL);
69b628ac71f07d6 Amit Kucheria                2019-03-20  182  	if (!priv->tm_map)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  183  		return -ENODEV;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  184  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  185  	/*
20d4fd84bf524ad Rajendra Nayak               2016-05-05  186  	 * The status registers for each sensor are discontiguous
20d4fd84bf524ad Rajendra Nayak               2016-05-05  187  	 * because some SoCs have 5 sensors while others have more
20d4fd84bf524ad Rajendra Nayak               2016-05-05  188  	 * but the control registers stay in the same place, i.e
20d4fd84bf524ad Rajendra Nayak               2016-05-05  189  	 * directly after the first 5 status registers.
20d4fd84bf524ad Rajendra Nayak               2016-05-05  190  	 */
69b628ac71f07d6 Amit Kucheria                2019-03-20  191  	for (i = 0; i < priv->num_sensors; i++) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  192  		if (i >= 5)
69b628ac71f07d6 Amit Kucheria                2019-03-20 @193  			priv->sensor[i].status = S0_STATUS_ADDR + 40;
69b628ac71f07d6 Amit Kucheria                2019-03-20  194  		priv->sensor[i].status += i * 4;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  195  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  196  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  197  	reg_cntl = SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  198  	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  199  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  200  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  201  
69b628ac71f07d6 Amit Kucheria                2019-03-20  202  	if (priv->num_sensors > 1) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  203  		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  204  		reg_cntl &= ~SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  205  		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
20d4fd84bf524ad Rajendra Nayak               2016-05-05  206  					 CONFIG_MASK, CONFIG);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  207  	} else {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  208  		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  209  		reg_cntl &= ~CONFIG_MASK_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  210  		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  211  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  212  
69b628ac71f07d6 Amit Kucheria                2019-03-20  213  	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
69b628ac71f07d6 Amit Kucheria                2019-03-20  214  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  215  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  216  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  217  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  218  	reg_cntl |= EN;
69b628ac71f07d6 Amit Kucheria                2019-03-20  219  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  220  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  221  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  222  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  223  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  224  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  225  
69b628ac71f07d6 Amit Kucheria                2019-03-20  226  static int calibrate_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  227  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  228  	int i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  229  	char *data;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  230  
69b628ac71f07d6 Amit Kucheria                2019-03-20  231  	ssize_t num_read = priv->num_sensors;
69b628ac71f07d6 Amit Kucheria                2019-03-20  232  	struct tsens_sensor *s = priv->sensor;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  233  
69b628ac71f07d6 Amit Kucheria                2019-03-20  234  	data = qfprom_read(priv->dev, "calib");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  235  	if (IS_ERR(data))
69b628ac71f07d6 Amit Kucheria                2019-03-20  236  		data = qfprom_read(priv->dev, "calib_backup");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  237  	if (IS_ERR(data))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  238  		return PTR_ERR(data);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  239  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  240  	for (i = 0; i < num_read; i++, s++)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  241  		s->offset = data[i];
20d4fd84bf524ad Rajendra Nayak               2016-05-05  242  
6b8249abb093551 Srinivas Kandagatla          2019-08-23  243  	kfree(data);
6b8249abb093551 Srinivas Kandagatla          2019-08-23  244  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  245  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  246  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  247  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  248  /* Temperature on y axis and ADC-code on x-axis */
20d4fd84bf524ad Rajendra Nayak               2016-05-05  249  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  250  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  251  	int slope, offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  252  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  253  	slope = thermal_zone_get_slope(s->tzd);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  254  	offset = CAL_MDEGC - slope * s->offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  255  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  256  	return adc_code * slope + offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  257  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  258  
e604bdd2a7e1087 Amit Kucheria                2020-03-12  259  static int get_temp_8960(const struct tsens_sensor *s, int *temp)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  260  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  261  	int ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  262  	u32 code, trdy;
8b71bce407b3f13 Amit Kucheria                2019-11-01  263  	struct tsens_priv *priv = s->priv;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  264  	unsigned long timeout;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  265  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  266  	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  267  	do {
69b628ac71f07d6 Amit Kucheria                2019-03-20  268  		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  269  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  270  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  271  		if (!(trdy & TRDY_MASK))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  272  			continue;
69b628ac71f07d6 Amit Kucheria                2019-03-20  273  		ret = regmap_read(priv->tm_map, s->status, &code);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  274  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  275  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  276  		*temp = code_to_mdegC(code, s);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  277  		return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  278  	} while (time_before(jiffies, timeout));
20d4fd84bf524ad Rajendra Nayak               2016-05-05  279  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  280  	return -ETIMEDOUT;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  281  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  282  
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  283  static struct tsens_features tsens_8960_feat = {
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15 @284  	.ver_major	= VER_0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  285  	.crit_int	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  286  	.adc		= 1,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  287  	.srot_split	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  288  	.max_sensors	= 11,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  289  };
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  290  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 36618 bytes --]

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

>
> Hi thermal-bot,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on linus/master]
> [also build test ERROR on v5.12-rc7]
> [cannot apply to thermal/next next-20210415]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
> config: arm-randconfig-r015-20210415 (attached as .config)
> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
>         git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>    drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
> >> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
>      193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
>          |                             ^~~~~~~~~~~~~~
>          |                             INT_STATUS_ADDR
>    drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
>    drivers/thermal/qcom/tsens-8960.c: At top level:
> >> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
>      284 |  .ver_major = VER_0,
>          |               ^~~~~
>          |               VER_0_1
>
>
> vim +193 drivers/thermal/qcom/tsens-8960.c
>
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  175
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  176  static int init_8960(struct tsens_priv *priv)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  177  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  178    int ret, i;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  179    u32 reg_cntl;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  180
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  181    priv->tm_map = dev_get_regmap(priv->dev, NULL);
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  182    if (!priv->tm_map)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  183            return -ENODEV;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  184
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  185    /*
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  186     * The status registers for each sensor are discontiguous
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  187     * because some SoCs have 5 sensors while others have more
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  188     * but the control registers stay in the same place, i.e
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  189     * directly after the first 5 status registers.
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  190     */
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  191    for (i = 0; i < priv->num_sensors; i++) {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  192            if (i >= 5)
> 69b628ac71f07d6 Amit Kucheria                2019-03-20 @193                    priv->sensor[i].status = S0_STATUS_ADDR + 40;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  194            priv->sensor[i].status += i * 4;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  195    }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  196
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  197    reg_cntl = SW_RST;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  198    ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  199    if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  200            return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  201
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  202    if (priv->num_sensors > 1) {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  203            reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  204            reg_cntl &= ~SW_RST;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  205            ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  206                                     CONFIG_MASK, CONFIG);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  207    } else {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  208            reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  209            reg_cntl &= ~CONFIG_MASK_8660;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  210            reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  211    }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  212
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  213    reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  214    ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  215    if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  216            return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  217
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  218    reg_cntl |= EN;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  219    ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  220    if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  221            return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  222
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  223    return 0;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  224  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  225
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  226  static int calibrate_8960(struct tsens_priv *priv)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  227  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  228    int i;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  229    char *data;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  230
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  231    ssize_t num_read = priv->num_sensors;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  232    struct tsens_sensor *s = priv->sensor;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  233
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  234    data = qfprom_read(priv->dev, "calib");
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  235    if (IS_ERR(data))
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  236            data = qfprom_read(priv->dev, "calib_backup");
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  237    if (IS_ERR(data))
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  238            return PTR_ERR(data);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  239
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  240    for (i = 0; i < num_read; i++, s++)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  241            s->offset = data[i];
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  242
> 6b8249abb093551 Srinivas Kandagatla          2019-08-23  243    kfree(data);
> 6b8249abb093551 Srinivas Kandagatla          2019-08-23  244
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  245    return 0;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  246  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  247
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  248  /* Temperature on y axis and ADC-code on x-axis */
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  249  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  250  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  251    int slope, offset;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  252
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  253    slope = thermal_zone_get_slope(s->tzd);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  254    offset = CAL_MDEGC - slope * s->offset;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  255
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  256    return adc_code * slope + offset;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  257  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  258
> e604bdd2a7e1087 Amit Kucheria                2020-03-12  259  static int get_temp_8960(const struct tsens_sensor *s, int *temp)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  260  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  261    int ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  262    u32 code, trdy;
> 8b71bce407b3f13 Amit Kucheria                2019-11-01  263    struct tsens_priv *priv = s->priv;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  264    unsigned long timeout;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  265
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  266    timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  267    do {
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  268            ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  269            if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  270                    return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  271            if (!(trdy & TRDY_MASK))
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  272                    continue;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  273            ret = regmap_read(priv->tm_map, s->status, &code);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  274            if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  275                    return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  276            *temp = code_to_mdegC(code, s);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  277            return 0;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  278    } while (time_before(jiffies, timeout));
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  279
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  280    return -ETIMEDOUT;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  281  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  282
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  283  static struct tsens_features tsens_8960_feat = {
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15 @284    .ver_major      = VER_0,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  285    .crit_int       = 0,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  286    .adc            = 1,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  287    .srot_split     = 0,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  288    .max_sensors    = 11,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  289  };
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  290
>
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

What happened here? This doesn't seem right.

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

[-- Attachment #1: Type: text/plain, Size: 13124 bytes --]

>
> Hi thermal-bot,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on linus/master]
> [also build test ERROR on v5.12-rc7]
> [cannot apply to thermal/next next-20210415]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch]
>
> url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
> config: arm-randconfig-r015-20210415 (attached as .config)
> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
>         git remote add linux-review https://github.com/0day-ci/linux
>         git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
>         git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
>    drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
> >> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
>      193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
>          |                             ^~~~~~~~~~~~~~
>          |                             INT_STATUS_ADDR
>    drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
>    drivers/thermal/qcom/tsens-8960.c: At top level:
> >> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
>      284 |  .ver_major = VER_0,
>          |               ^~~~~
>          |               VER_0_1
>
>
> vim +193 drivers/thermal/qcom/tsens-8960.c
>
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  175
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  176  static int init_8960(struct tsens_priv *priv)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  177  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  178    int ret, i;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  179    u32 reg_cntl;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  180
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  181    priv->tm_map = dev_get_regmap(priv->dev, NULL);
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  182    if (!priv->tm_map)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  183            return -ENODEV;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  184
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  185    /*
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  186     * The status registers for each sensor are discontiguous
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  187     * because some SoCs have 5 sensors while others have more
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  188     * but the control registers stay in the same place, i.e
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  189     * directly after the first 5 status registers.
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  190     */
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  191    for (i = 0; i < priv->num_sensors; i++) {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  192            if (i >= 5)
> 69b628ac71f07d6 Amit Kucheria                2019-03-20 @193                    priv->sensor[i].status = S0_STATUS_ADDR + 40;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  194            priv->sensor[i].status += i * 4;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  195    }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  196
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  197    reg_cntl = SW_RST;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  198    ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  199    if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  200            return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  201
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  202    if (priv->num_sensors > 1) {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  203            reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  204            reg_cntl &= ~SW_RST;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  205            ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  206                                     CONFIG_MASK, CONFIG);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  207    } else {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  208            reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  209            reg_cntl &= ~CONFIG_MASK_8660;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  210            reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  211    }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  212
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  213    reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  214    ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  215    if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  216            return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  217
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  218    reg_cntl |= EN;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  219    ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  220    if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  221            return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  222
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  223    return 0;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  224  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  225
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  226  static int calibrate_8960(struct tsens_priv *priv)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  227  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  228    int i;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  229    char *data;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  230
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  231    ssize_t num_read = priv->num_sensors;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  232    struct tsens_sensor *s = priv->sensor;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  233
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  234    data = qfprom_read(priv->dev, "calib");
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  235    if (IS_ERR(data))
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  236            data = qfprom_read(priv->dev, "calib_backup");
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  237    if (IS_ERR(data))
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  238            return PTR_ERR(data);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  239
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  240    for (i = 0; i < num_read; i++, s++)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  241            s->offset = data[i];
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  242
> 6b8249abb093551 Srinivas Kandagatla          2019-08-23  243    kfree(data);
> 6b8249abb093551 Srinivas Kandagatla          2019-08-23  244
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  245    return 0;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  246  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  247
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  248  /* Temperature on y axis and ADC-code on x-axis */
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  249  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  250  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  251    int slope, offset;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  252
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  253    slope = thermal_zone_get_slope(s->tzd);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  254    offset = CAL_MDEGC - slope * s->offset;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  255
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  256    return adc_code * slope + offset;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  257  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  258
> e604bdd2a7e1087 Amit Kucheria                2020-03-12  259  static int get_temp_8960(const struct tsens_sensor *s, int *temp)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  260  {
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  261    int ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  262    u32 code, trdy;
> 8b71bce407b3f13 Amit Kucheria                2019-11-01  263    struct tsens_priv *priv = s->priv;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  264    unsigned long timeout;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  265
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  266    timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  267    do {
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  268            ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  269            if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  270                    return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  271            if (!(trdy & TRDY_MASK))
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  272                    continue;
> 69b628ac71f07d6 Amit Kucheria                2019-03-20  273            ret = regmap_read(priv->tm_map, s->status, &code);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  274            if (ret)
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  275                    return ret;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  276            *temp = code_to_mdegC(code, s);
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  277            return 0;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  278    } while (time_before(jiffies, timeout));
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  279
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  280    return -ETIMEDOUT;
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  281  }
> 20d4fd84bf524ad Rajendra Nayak               2016-05-05  282
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  283  static struct tsens_features tsens_8960_feat = {
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15 @284    .ver_major      = VER_0,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  285    .crit_int       = 0,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  286    .adc            = 1,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  287    .srot_split     = 0,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  288    .max_sensors    = 11,
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  289  };
> efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  290
>
> ---
> 0-DAY CI Kernel Test Service, Intel Corporation
> https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

What happened here? This doesn't seem right.

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Daniel Lezcano]

On 15/04/2021 20:52, Ansuel Smith wrote:
>>
>> Hi thermal-bot,
>>
>> Thank you for the patch! Yet something to improve:
>>
>> [auto build test ERROR on linus/master]
>> [also build test ERROR on v5.12-rc7]
>> [cannot apply to thermal/next next-20210415]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch]
>>
>> url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
>> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
>> config: arm-randconfig-r015-20210415 (attached as .config)
>> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
>> reproduce (this is a W=1 build):
>>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>>         chmod +x ~/bin/make.cross
>>         # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
>>         git remote add linux-review https://github.com/0day-ci/linux
>>         git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
>>         git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
>>         # save the attached .config to linux build tree
>>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>
>>    drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
>>>> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
>>      193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
>>          |                             ^~~~~~~~~~~~~~
>>          |                             INT_STATUS_ADDR
>>    drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
>>    drivers/thermal/qcom/tsens-8960.c: At top level:
>>>> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
>>      284 |  .ver_major = VER_0,
>>          |               ^~~~~
>>          |               VER_0_1
>>
>>
>> vim +193 drivers/thermal/qcom/tsens-8960.c

[ ... ]

> What happened here? This doesn't seem right.

Yes, it is. It means the series is not git bisect safe.

Please fix it.



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Daniel Lezcano]

[-- Attachment #1: Type: text/plain, Size: 2975 bytes --]

On 15/04/2021 20:52, Ansuel Smith wrote:
>>
>> Hi thermal-bot,
>>
>> Thank you for the patch! Yet something to improve:
>>
>> [auto build test ERROR on linus/master]
>> [also build test ERROR on v5.12-rc7]
>> [cannot apply to thermal/next next-20210415]
>> [If your patch is applied to the wrong git tree, kindly drop us a note.
>> And when submitting patch, we suggest to use '--base' as documented in
>> https://git-scm.com/docs/git-format-patch]
>>
>> url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
>> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
>> config: arm-randconfig-r015-20210415 (attached as .config)
>> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
>> reproduce (this is a W=1 build):
>>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>>         chmod +x ~/bin/make.cross
>>         # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
>>         git remote add linux-review https://github.com/0day-ci/linux
>>         git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
>>         git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
>>         # save the attached .config to linux build tree
>>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>
>>    drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
>>>> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
>>      193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
>>          |                             ^~~~~~~~~~~~~~
>>          |                             INT_STATUS_ADDR
>>    drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
>>    drivers/thermal/qcom/tsens-8960.c: At top level:
>>>> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
>>      284 |  .ver_major = VER_0,
>>          |               ^~~~~
>>          |               VER_0_1
>>
>>
>> vim +193 drivers/thermal/qcom/tsens-8960.c

[ ... ]

> What happened here? This doesn't seem right.

Yes, it is. It means the series is not git bisect safe.

Please fix it.



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

>
> On 15/04/2021 20:52, Ansuel Smith wrote:
> >>
> >> Hi thermal-bot,
> >>
> >> Thank you for the patch! Yet something to improve:
> >>
> >> [auto build test ERROR on linus/master]
> >> [also build test ERROR on v5.12-rc7]
> >> [cannot apply to thermal/next next-20210415]
> >> [If your patch is applied to the wrong git tree, kindly drop us a note.
> >> And when submitting patch, we suggest to use '--base' as documented in
> >> https://git-scm.com/docs/git-format-patch]
> >>
> >> url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
> >> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
> >> config: arm-randconfig-r015-20210415 (attached as .config)
> >> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
> >> reproduce (this is a W=1 build):
> >>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> >>         chmod +x ~/bin/make.cross
> >>         # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
> >>         git remote add linux-review https://github.com/0day-ci/linux
> >>         git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
> >>         git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
> >>         # save the attached .config to linux build tree
> >>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm
> >>
> >> If you fix the issue, kindly add following tag as appropriate
> >> Reported-by: kernel test robot <lkp@intel.com>
> >>
> >> All errors (new ones prefixed by >>):
> >>
> >>    drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
> >>>> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
> >>      193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
> >>          |                             ^~~~~~~~~~~~~~
> >>          |                             INT_STATUS_ADDR
> >>    drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
> >>    drivers/thermal/qcom/tsens-8960.c: At top level:
> >>>> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
> >>      284 |  .ver_major = VER_0,
> >>          |               ^~~~~
> >>          |               VER_0_1
> >>
> >>
> >> vim +193 drivers/thermal/qcom/tsens-8960.c
>
> [ ... ]
>
> > What happened here? This doesn't seem right.
>
> Yes, it is. It means the series is not git bisect safe.
>
> Please fix it.
>
>

I'm a bit confused. Should I send just a patch to fix this or I
need to send the series again rebased with the new changes?

>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

[-- Attachment #1: Type: text/plain, Size: 3225 bytes --]

>
> On 15/04/2021 20:52, Ansuel Smith wrote:
> >>
> >> Hi thermal-bot,
> >>
> >> Thank you for the patch! Yet something to improve:
> >>
> >> [auto build test ERROR on linus/master]
> >> [also build test ERROR on v5.12-rc7]
> >> [cannot apply to thermal/next next-20210415]
> >> [If your patch is applied to the wrong git tree, kindly drop us a note.
> >> And when submitting patch, we suggest to use '--base' as documented in
> >> https://git-scm.com/docs/git-format-patch]
> >>
> >> url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
> >> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
> >> config: arm-randconfig-r015-20210415 (attached as .config)
> >> compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
> >> reproduce (this is a W=1 build):
> >>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> >>         chmod +x ~/bin/make.cross
> >>         # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
> >>         git remote add linux-review https://github.com/0day-ci/linux
> >>         git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
> >>         git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
> >>         # save the attached .config to linux build tree
> >>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arm
> >>
> >> If you fix the issue, kindly add following tag as appropriate
> >> Reported-by: kernel test robot <lkp@intel.com>
> >>
> >> All errors (new ones prefixed by >>):
> >>
> >>    drivers/thermal/qcom/tsens-8960.c: In function 'init_8960':
> >>>> drivers/thermal/qcom/tsens-8960.c:193:29: error: 'S0_STATUS_ADDR' undeclared (first use in this function); did you mean 'INT_STATUS_ADDR'?
> >>      193 |    priv->sensor[i].status = S0_STATUS_ADDR + 40;
> >>          |                             ^~~~~~~~~~~~~~
> >>          |                             INT_STATUS_ADDR
> >>    drivers/thermal/qcom/tsens-8960.c:193:29: note: each undeclared identifier is reported only once for each function it appears in
> >>    drivers/thermal/qcom/tsens-8960.c: At top level:
> >>>> drivers/thermal/qcom/tsens-8960.c:284:15: error: 'VER_0' undeclared here (not in a function); did you mean 'VER_0_1'?
> >>      284 |  .ver_major = VER_0,
> >>          |               ^~~~~
> >>          |               VER_0_1
> >>
> >>
> >> vim +193 drivers/thermal/qcom/tsens-8960.c
>
> [ ... ]
>
> > What happened here? This doesn't seem right.
>
> Yes, it is. It means the series is not git bisect safe.
>
> Please fix it.
>
>

I'm a bit confused. Should I send just a patch to fix this or I
need to send the series again rebased with the new changes?

>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Daniel Lezcano]

On 19/04/2021 14:08, Ansuel Smith wrote:

[ ... ]

>>>> vim +193 drivers/thermal/qcom/tsens-8960.c
>>
>> [ ... ]
>>
>>> What happened here? This doesn't seem right.
>>
>> Yes, it is. It means the series is not git bisect safe.
>>
>> Please fix it.
>>
>>
> 
> I'm a bit confused. Should I send just a patch to fix this or I
> need to send the series again rebased with the new changes?

The latter, I've dropped your series from the thermal/next branch


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Daniel Lezcano]

[-- Attachment #1: Type: text/plain, Size: 711 bytes --]

On 19/04/2021 14:08, Ansuel Smith wrote:

[ ... ]

>>>> vim +193 drivers/thermal/qcom/tsens-8960.c
>>
>> [ ... ]
>>
>>> What happened here? This doesn't seem right.
>>
>> Yes, it is. It means the series is not git bisect safe.
>>
>> Please fix it.
>>
>>
> 
> I'm a bit confused. Should I send just a patch to fix this or I
> need to send the series again rebased with the new changes?

The latter, I've dropped your series from the thermal/next branch


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

>
> On 19/04/2021 14:08, Ansuel Smith wrote:
>
> [ ... ]
>
> >>>> vim +193 drivers/thermal/qcom/tsens-8960.c
> >>
> >> [ ... ]
> >>
> >>> What happened here? This doesn't seem right.
> >>
> >> Yes, it is. It means the series is not git bisect safe.
> >>
> >> Please fix it.
> >>
> >>
> >
> > I'm a bit confused. Should I send just a patch to fix this or I
> > need to send the series again rebased with the new changes?
>
> The latter, I've dropped your series from the thermal/next branch
>

Ok I will resend the series. I notice it has been applied to linux-next,
will that be a problem?

>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

[-- Attachment #1: Type: text/plain, Size: 865 bytes --]

>
> On 19/04/2021 14:08, Ansuel Smith wrote:
>
> [ ... ]
>
> >>>> vim +193 drivers/thermal/qcom/tsens-8960.c
> >>
> >> [ ... ]
> >>
> >>> What happened here? This doesn't seem right.
> >>
> >> Yes, it is. It means the series is not git bisect safe.
> >>
> >> Please fix it.
> >>
> >>
> >
> > I'm a bit confused. Should I send just a patch to fix this or I
> > need to send the series again rebased with the new changes?
>
> The latter, I've dropped your series from the thermal/next branch
>

Ok I will resend the series. I notice it has been applied to linux-next,
will that be a problem?

>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Daniel Lezcano]

On 20/04/2021 13:04, Ansuel Smith wrote:
>>
>> On 19/04/2021 14:08, Ansuel Smith wrote:
>>
>> [ ... ]
>>
>>>>>> vim +193 drivers/thermal/qcom/tsens-8960.c
>>>>
>>>> [ ... ]
>>>>
>>>>> What happened here? This doesn't seem right.
>>>>
>>>> Yes, it is. It means the series is not git bisect safe.
>>>>
>>>> Please fix it.
>>>>
>>>>
>>>
>>> I'm a bit confused. Should I send just a patch to fix this or I
>>> need to send the series again rebased with the new changes?
>>
>> The latter, I've dropped your series from the thermal/next branch
>>
> 
> Ok I will resend the series. I notice it has been applied to linux-next,
> will that be a problem?

No, it is fine. linux-next uses thermal/linux-next and it is allowed to
rebase the branch.

I've just updated it with your v14 series dropped.


>> --
>> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>>
>> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
>> <http://twitter.com/#!/linaroorg> Twitter |
>> <http://www.linaro.org/linaro-blog/> Blog


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Daniel Lezcano]

[-- Attachment #1: Type: text/plain, Size: 1316 bytes --]

On 20/04/2021 13:04, Ansuel Smith wrote:
>>
>> On 19/04/2021 14:08, Ansuel Smith wrote:
>>
>> [ ... ]
>>
>>>>>> vim +193 drivers/thermal/qcom/tsens-8960.c
>>>>
>>>> [ ... ]
>>>>
>>>>> What happened here? This doesn't seem right.
>>>>
>>>> Yes, it is. It means the series is not git bisect safe.
>>>>
>>>> Please fix it.
>>>>
>>>>
>>>
>>> I'm a bit confused. Should I send just a patch to fix this or I
>>> need to send the series again rebased with the new changes?
>>
>> The latter, I've dropped your series from the thermal/next branch
>>
> 
> Ok I will resend the series. I notice it has been applied to linux-next,
> will that be a problem?

No, it is fine. linux-next uses thermal/linux-next and it is allowed to
rebase the branch.

I've just updated it with your v14 series dropped.


>> --
>> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>>
>> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
>> <http://twitter.com/#!/linaroorg> Twitter |
>> <http://www.linaro.org/linaro-blog/> Blog


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

>
> On 20/04/2021 13:04, Ansuel Smith wrote:
> >>
> >> On 19/04/2021 14:08, Ansuel Smith wrote:
> >>
> >> [ ... ]
> >>
> >>>>>> vim +193 drivers/thermal/qcom/tsens-8960.c
> >>>>
> >>>> [ ... ]
> >>>>
> >>>>> What happened here? This doesn't seem right.
> >>>>
> >>>> Yes, it is. It means the series is not git bisect safe.
> >>>>
> >>>> Please fix it.
> >>>>
> >>>>
> >>>
> >>> I'm a bit confused. Should I send just a patch to fix this or I
> >>> need to send the series again rebased with the new changes?
> >>
> >> The latter, I've dropped your series from the thermal/next branch
> >>
> >
> > Ok I will resend the series. I notice it has been applied to linux-next,
> > will that be a problem?
>
> No, it is fine. linux-next uses thermal/linux-next and it is allowed to
> rebase the branch.
>
> I've just updated it with your v14 series dropped.
>

I have just sent v15 series hoping it's more bisect friendly. Hope it's
good now and sorry for the mess.

>
> >> --
> >> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
> >>
> >> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> >> <http://twitter.com/#!/linaroorg> Twitter |
> >> <http://www.linaro.org/linaro-blog/> Blog
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[Ansuel Smith]

[-- Attachment #1: Type: text/plain, Size: 1515 bytes --]

>
> On 20/04/2021 13:04, Ansuel Smith wrote:
> >>
> >> On 19/04/2021 14:08, Ansuel Smith wrote:
> >>
> >> [ ... ]
> >>
> >>>>>> vim +193 drivers/thermal/qcom/tsens-8960.c
> >>>>
> >>>> [ ... ]
> >>>>
> >>>>> What happened here? This doesn't seem right.
> >>>>
> >>>> Yes, it is. It means the series is not git bisect safe.
> >>>>
> >>>> Please fix it.
> >>>>
> >>>>
> >>>
> >>> I'm a bit confused. Should I send just a patch to fix this or I
> >>> need to send the series again rebased with the new changes?
> >>
> >> The latter, I've dropped your series from the thermal/next branch
> >>
> >
> > Ok I will resend the series. I notice it has been applied to linux-next,
> > will that be a problem?
>
> No, it is fine. linux-next uses thermal/linux-next and it is allowed to
> rebase the branch.
>
> I've just updated it with your v14 series dropped.
>

I have just sent v15 series hoping it's more bisect friendly. Hope it's
good now and sorry for the mess.

>
> >> --
> >> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
> >>
> >> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> >> <http://twitter.com/#!/linaroorg> Twitter |
> >> <http://www.linaro.org/linaro-blog/> Blog
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12121 bytes --]

Hi thermal-bot,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.12-rc7]
[cannot apply to thermal/next next-20210415]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
config: powerpc-randconfig-r022-20210415 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 6a18cc23efad410db48a3ccfc233d215de7d4cb9)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install powerpc cross compiling tool for clang build
        # apt-get install binutils-powerpc-linux-gnu
        # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
        git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 ARCH=powerpc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/thermal/qcom/tsens-8960.c:193:29: error: use of undeclared identifier 'S0_STATUS_ADDR'
                           priv->sensor[i].status = S0_STATUS_ADDR + 40;
                                                    ^
>> drivers/thermal/qcom/tsens-8960.c:284:15: error: use of undeclared identifier 'VER_0'
           .ver_major      = VER_0,
                             ^
   2 errors generated.


vim +/S0_STATUS_ADDR +193 drivers/thermal/qcom/tsens-8960.c

20d4fd84bf524ad Rajendra Nayak               2016-05-05  175  
69b628ac71f07d6 Amit Kucheria                2019-03-20  176  static int init_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  177  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  178  	int ret, i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  179  	u32 reg_cntl;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  180  
69b628ac71f07d6 Amit Kucheria                2019-03-20  181  	priv->tm_map = dev_get_regmap(priv->dev, NULL);
69b628ac71f07d6 Amit Kucheria                2019-03-20  182  	if (!priv->tm_map)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  183  		return -ENODEV;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  184  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  185  	/*
20d4fd84bf524ad Rajendra Nayak               2016-05-05  186  	 * The status registers for each sensor are discontiguous
20d4fd84bf524ad Rajendra Nayak               2016-05-05  187  	 * because some SoCs have 5 sensors while others have more
20d4fd84bf524ad Rajendra Nayak               2016-05-05  188  	 * but the control registers stay in the same place, i.e
20d4fd84bf524ad Rajendra Nayak               2016-05-05  189  	 * directly after the first 5 status registers.
20d4fd84bf524ad Rajendra Nayak               2016-05-05  190  	 */
69b628ac71f07d6 Amit Kucheria                2019-03-20  191  	for (i = 0; i < priv->num_sensors; i++) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  192  		if (i >= 5)
69b628ac71f07d6 Amit Kucheria                2019-03-20 @193  			priv->sensor[i].status = S0_STATUS_ADDR + 40;
69b628ac71f07d6 Amit Kucheria                2019-03-20  194  		priv->sensor[i].status += i * 4;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  195  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  196  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  197  	reg_cntl = SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  198  	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  199  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  200  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  201  
69b628ac71f07d6 Amit Kucheria                2019-03-20  202  	if (priv->num_sensors > 1) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  203  		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  204  		reg_cntl &= ~SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  205  		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
20d4fd84bf524ad Rajendra Nayak               2016-05-05  206  					 CONFIG_MASK, CONFIG);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  207  	} else {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  208  		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  209  		reg_cntl &= ~CONFIG_MASK_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  210  		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  211  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  212  
69b628ac71f07d6 Amit Kucheria                2019-03-20  213  	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
69b628ac71f07d6 Amit Kucheria                2019-03-20  214  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  215  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  216  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  217  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  218  	reg_cntl |= EN;
69b628ac71f07d6 Amit Kucheria                2019-03-20  219  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  220  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  221  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  222  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  223  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  224  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  225  
69b628ac71f07d6 Amit Kucheria                2019-03-20  226  static int calibrate_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  227  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  228  	int i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  229  	char *data;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  230  
69b628ac71f07d6 Amit Kucheria                2019-03-20  231  	ssize_t num_read = priv->num_sensors;
69b628ac71f07d6 Amit Kucheria                2019-03-20  232  	struct tsens_sensor *s = priv->sensor;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  233  
69b628ac71f07d6 Amit Kucheria                2019-03-20  234  	data = qfprom_read(priv->dev, "calib");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  235  	if (IS_ERR(data))
69b628ac71f07d6 Amit Kucheria                2019-03-20  236  		data = qfprom_read(priv->dev, "calib_backup");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  237  	if (IS_ERR(data))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  238  		return PTR_ERR(data);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  239  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  240  	for (i = 0; i < num_read; i++, s++)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  241  		s->offset = data[i];
20d4fd84bf524ad Rajendra Nayak               2016-05-05  242  
6b8249abb093551 Srinivas Kandagatla          2019-08-23  243  	kfree(data);
6b8249abb093551 Srinivas Kandagatla          2019-08-23  244  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  245  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  246  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  247  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  248  /* Temperature on y axis and ADC-code on x-axis */
20d4fd84bf524ad Rajendra Nayak               2016-05-05  249  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  250  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  251  	int slope, offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  252  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  253  	slope = thermal_zone_get_slope(s->tzd);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  254  	offset = CAL_MDEGC - slope * s->offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  255  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  256  	return adc_code * slope + offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  257  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  258  
e604bdd2a7e1087 Amit Kucheria                2020-03-12  259  static int get_temp_8960(const struct tsens_sensor *s, int *temp)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  260  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  261  	int ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  262  	u32 code, trdy;
8b71bce407b3f13 Amit Kucheria                2019-11-01  263  	struct tsens_priv *priv = s->priv;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  264  	unsigned long timeout;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  265  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  266  	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  267  	do {
69b628ac71f07d6 Amit Kucheria                2019-03-20  268  		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  269  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  270  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  271  		if (!(trdy & TRDY_MASK))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  272  			continue;
69b628ac71f07d6 Amit Kucheria                2019-03-20  273  		ret = regmap_read(priv->tm_map, s->status, &code);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  274  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  275  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  276  		*temp = code_to_mdegC(code, s);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  277  		return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  278  	} while (time_before(jiffies, timeout));
20d4fd84bf524ad Rajendra Nayak               2016-05-05  279  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  280  	return -ETIMEDOUT;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  281  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  282  
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  283  static struct tsens_features tsens_8960_feat = {
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15 @284  	.ver_major	= VER_0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  285  	.crit_int	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  286  	.adc		= 1,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  287  	.srot_split	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  288  	.max_sensors	= 11,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  289  };
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  290  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 41268 bytes --]

Re: [thermal: thermal/next] thermal/drivers/tsens: Convert msm8960 to reg_field

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 12286 bytes --]

Hi thermal-bot,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.12-rc7]
[cannot apply to thermal/next next-20210415]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 7f75285ca572eaabc028cf78c6ab5473d0d160be
config: powerpc-randconfig-r022-20210415 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project 6a18cc23efad410db48a3ccfc233d215de7d4cb9)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install powerpc cross compiling tool for clang build
        # apt-get install binutils-powerpc-linux-gnu
        # https://github.com/0day-ci/linux/commit/efea0f0570b6b581bdb2fad978a35fd1a521385b
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review thermal-bot-for-Ansuel-Smith/thermal-drivers-tsens-Convert-msm8960-to-reg_field/20210415-200542
        git checkout efea0f0570b6b581bdb2fad978a35fd1a521385b
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 ARCH=powerpc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/thermal/qcom/tsens-8960.c:193:29: error: use of undeclared identifier 'S0_STATUS_ADDR'
                           priv->sensor[i].status = S0_STATUS_ADDR + 40;
                                                    ^
>> drivers/thermal/qcom/tsens-8960.c:284:15: error: use of undeclared identifier 'VER_0'
           .ver_major      = VER_0,
                             ^
   2 errors generated.


vim +/S0_STATUS_ADDR +193 drivers/thermal/qcom/tsens-8960.c

20d4fd84bf524ad Rajendra Nayak               2016-05-05  175  
69b628ac71f07d6 Amit Kucheria                2019-03-20  176  static int init_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  177  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  178  	int ret, i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  179  	u32 reg_cntl;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  180  
69b628ac71f07d6 Amit Kucheria                2019-03-20  181  	priv->tm_map = dev_get_regmap(priv->dev, NULL);
69b628ac71f07d6 Amit Kucheria                2019-03-20  182  	if (!priv->tm_map)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  183  		return -ENODEV;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  184  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  185  	/*
20d4fd84bf524ad Rajendra Nayak               2016-05-05  186  	 * The status registers for each sensor are discontiguous
20d4fd84bf524ad Rajendra Nayak               2016-05-05  187  	 * because some SoCs have 5 sensors while others have more
20d4fd84bf524ad Rajendra Nayak               2016-05-05  188  	 * but the control registers stay in the same place, i.e
20d4fd84bf524ad Rajendra Nayak               2016-05-05  189  	 * directly after the first 5 status registers.
20d4fd84bf524ad Rajendra Nayak               2016-05-05  190  	 */
69b628ac71f07d6 Amit Kucheria                2019-03-20  191  	for (i = 0; i < priv->num_sensors; i++) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  192  		if (i >= 5)
69b628ac71f07d6 Amit Kucheria                2019-03-20 @193  			priv->sensor[i].status = S0_STATUS_ADDR + 40;
69b628ac71f07d6 Amit Kucheria                2019-03-20  194  		priv->sensor[i].status += i * 4;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  195  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  196  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  197  	reg_cntl = SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  198  	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  199  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  200  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  201  
69b628ac71f07d6 Amit Kucheria                2019-03-20  202  	if (priv->num_sensors > 1) {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  203  		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  204  		reg_cntl &= ~SW_RST;
69b628ac71f07d6 Amit Kucheria                2019-03-20  205  		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
20d4fd84bf524ad Rajendra Nayak               2016-05-05  206  					 CONFIG_MASK, CONFIG);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  207  	} else {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  208  		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  209  		reg_cntl &= ~CONFIG_MASK_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  210  		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  211  	}
20d4fd84bf524ad Rajendra Nayak               2016-05-05  212  
69b628ac71f07d6 Amit Kucheria                2019-03-20  213  	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
69b628ac71f07d6 Amit Kucheria                2019-03-20  214  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  215  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  216  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  217  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  218  	reg_cntl |= EN;
69b628ac71f07d6 Amit Kucheria                2019-03-20  219  	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  220  	if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  221  		return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  222  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  223  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  224  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  225  
69b628ac71f07d6 Amit Kucheria                2019-03-20  226  static int calibrate_8960(struct tsens_priv *priv)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  227  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  228  	int i;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  229  	char *data;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  230  
69b628ac71f07d6 Amit Kucheria                2019-03-20  231  	ssize_t num_read = priv->num_sensors;
69b628ac71f07d6 Amit Kucheria                2019-03-20  232  	struct tsens_sensor *s = priv->sensor;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  233  
69b628ac71f07d6 Amit Kucheria                2019-03-20  234  	data = qfprom_read(priv->dev, "calib");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  235  	if (IS_ERR(data))
69b628ac71f07d6 Amit Kucheria                2019-03-20  236  		data = qfprom_read(priv->dev, "calib_backup");
20d4fd84bf524ad Rajendra Nayak               2016-05-05  237  	if (IS_ERR(data))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  238  		return PTR_ERR(data);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  239  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  240  	for (i = 0; i < num_read; i++, s++)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  241  		s->offset = data[i];
20d4fd84bf524ad Rajendra Nayak               2016-05-05  242  
6b8249abb093551 Srinivas Kandagatla          2019-08-23  243  	kfree(data);
6b8249abb093551 Srinivas Kandagatla          2019-08-23  244  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  245  	return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  246  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  247  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  248  /* Temperature on y axis and ADC-code on x-axis */
20d4fd84bf524ad Rajendra Nayak               2016-05-05  249  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  250  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  251  	int slope, offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  252  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  253  	slope = thermal_zone_get_slope(s->tzd);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  254  	offset = CAL_MDEGC - slope * s->offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  255  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  256  	return adc_code * slope + offset;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  257  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  258  
e604bdd2a7e1087 Amit Kucheria                2020-03-12  259  static int get_temp_8960(const struct tsens_sensor *s, int *temp)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  260  {
20d4fd84bf524ad Rajendra Nayak               2016-05-05  261  	int ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  262  	u32 code, trdy;
8b71bce407b3f13 Amit Kucheria                2019-11-01  263  	struct tsens_priv *priv = s->priv;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  264  	unsigned long timeout;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  265  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  266  	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  267  	do {
69b628ac71f07d6 Amit Kucheria                2019-03-20  268  		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  269  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  270  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  271  		if (!(trdy & TRDY_MASK))
20d4fd84bf524ad Rajendra Nayak               2016-05-05  272  			continue;
69b628ac71f07d6 Amit Kucheria                2019-03-20  273  		ret = regmap_read(priv->tm_map, s->status, &code);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  274  		if (ret)
20d4fd84bf524ad Rajendra Nayak               2016-05-05  275  			return ret;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  276  		*temp = code_to_mdegC(code, s);
20d4fd84bf524ad Rajendra Nayak               2016-05-05  277  		return 0;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  278  	} while (time_before(jiffies, timeout));
20d4fd84bf524ad Rajendra Nayak               2016-05-05  279  
20d4fd84bf524ad Rajendra Nayak               2016-05-05  280  	return -ETIMEDOUT;
20d4fd84bf524ad Rajendra Nayak               2016-05-05  281  }
20d4fd84bf524ad Rajendra Nayak               2016-05-05  282  
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  283  static struct tsens_features tsens_8960_feat = {
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15 @284  	.ver_major	= VER_0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  285  	.crit_int	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  286  	.adc		= 1,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  287  	.srot_split	= 0,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  288  	.max_sensors	= 11,
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  289  };
efea0f0570b6b58 thermal-bot for Ansuel Smith 2021-04-15  290  

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org

[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 41268 bytes --]

[PATCH v14 4/9] drivers: thermal: tsens: Use init_common for msm8960

[Ansuel Smith]

Use init_common and drop custom init for msm8960.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------
 1 file changed, 1 insertion(+), 51 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 3f4fc1ffe679..86585f439985 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -173,56 +173,6 @@ static void disable_8960(struct tsens_priv *priv)
 	regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
 }
 
-static int init_8960(struct tsens_priv *priv)
-{
-	int ret, i;
-	u32 reg_cntl;
-
-	priv->tm_map = dev_get_regmap(priv->dev, NULL);
-	if (!priv->tm_map)
-		return -ENODEV;
-
-	/*
-	 * The status registers for each sensor are discontiguous
-	 * because some SoCs have 5 sensors while others have more
-	 * but the control registers stay in the same place, i.e
-	 * directly after the first 5 status registers.
-	 */
-	for (i = 0; i < priv->num_sensors; i++) {
-		if (i >= 5)
-			priv->sensor[i].status = S0_STATUS_ADDR + 40;
-		priv->sensor[i].status += i * 4;
-	}
-
-	reg_cntl = SW_RST;
-	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
-	if (ret)
-		return ret;
-
-	if (priv->num_sensors > 1) {
-		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
-		reg_cntl &= ~SW_RST;
-		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
-					 CONFIG_MASK, CONFIG);
-	} else {
-		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
-		reg_cntl &= ~CONFIG_MASK_8660;
-		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
-	}
-
-	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
-	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
-	if (ret)
-		return ret;
-
-	reg_cntl |= EN;
-	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 static int calibrate_8960(struct tsens_priv *priv)
 {
 	int i;
@@ -346,7 +296,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
 };
 
 static const struct tsens_ops ops_8960 = {
-	.init		= init_8960,
+	.init		= init_common,
 	.calibrate	= calibrate_8960,
 	.get_temp	= get_temp_8960,
 	.enable		= enable_8960,
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Use init_common for msm8960

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     8f6f199c587b6b71308fd9ea74ce2e9c4c1fe5c9
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//8f6f199c587b6b71308fd9ea74ce2e9c4c1fe5c9
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:18 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:43 +02:00

thermal/drivers/tsens: Use init_common for msm8960

Use init_common and drop custom init for msm8960.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-5-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens-8960.c | 52 +------------------------------
 1 file changed, 1 insertion(+), 51 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 3f4fc1f..86585f4 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -173,56 +173,6 @@ static void disable_8960(struct tsens_priv *priv)
 	regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
 }
 
-static int init_8960(struct tsens_priv *priv)
-{
-	int ret, i;
-	u32 reg_cntl;
-
-	priv->tm_map = dev_get_regmap(priv->dev, NULL);
-	if (!priv->tm_map)
-		return -ENODEV;
-
-	/*
-	 * The status registers for each sensor are discontiguous
-	 * because some SoCs have 5 sensors while others have more
-	 * but the control registers stay in the same place, i.e
-	 * directly after the first 5 status registers.
-	 */
-	for (i = 0; i < priv->num_sensors; i++) {
-		if (i >= 5)
-			priv->sensor[i].status = S0_STATUS_ADDR + 40;
-		priv->sensor[i].status += i * 4;
-	}
-
-	reg_cntl = SW_RST;
-	ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
-	if (ret)
-		return ret;
-
-	if (priv->num_sensors > 1) {
-		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
-		reg_cntl &= ~SW_RST;
-		ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR,
-					 CONFIG_MASK, CONFIG);
-	} else {
-		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
-		reg_cntl &= ~CONFIG_MASK_8660;
-		reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660;
-	}
-
-	reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT;
-	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
-	if (ret)
-		return ret;
-
-	reg_cntl |= EN;
-	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
 static int calibrate_8960(struct tsens_priv *priv)
 {
 	int i;
@@ -346,7 +296,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
 };
 
 static const struct tsens_ops ops_8960 = {
-	.init		= init_8960,
+	.init		= init_common,
 	.calibrate	= calibrate_8960,
 	.get_temp	= get_temp_8960,
 	.enable		= enable_8960,

[PATCH v14 5/9] drivers: thermal: tsens: Fix bug in sensor enable for msm8960

[Ansuel Smith]

Device based on tsens VER_0 contains a hardware bug that results in some
problem with sensor enablement. Sensor id 6-11 can't be enabled
selectively and all of them must be enabled in one step.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 86585f439985..95fcccafae14 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -27,9 +27,9 @@
 #define EN			BIT(0)
 #define SW_RST			BIT(1)
 #define SENSOR0_EN		BIT(3)
+#define MEASURE_PERIOD		BIT(18)
 #define SLP_CLK_ENA		BIT(26)
 #define SLP_CLK_ENA_8660	BIT(24)
-#define MEASURE_PERIOD		1
 #define SENSOR0_SHIFT		3
 
 /* INT_STATUS_ADDR bitmasks */
@@ -126,17 +126,34 @@ static int resume_8960(struct tsens_priv *priv)
 static int enable_8960(struct tsens_priv *priv, int id)
 {
 	int ret;
-	u32 reg, mask;
+	u32 reg, mask = BIT(id);
 
 	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
 	if (ret)
 		return ret;
 
-	mask = BIT(id + SENSOR0_SHIFT);
+	/* HARDWARE BUG:
+	 * On platforms with more than 6 sensors, all remaining sensors
+	 * must be enabled together, otherwise undefined results are expected.
+	 * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,
+	 * all the sensors are enabled in one step hence this bug is not
+	 * triggered.
+	 */
+	if (id > 5)
+		mask = GENMASK(10, 6);
+
+	mask <<= SENSOR0_SHIFT;
+
+	/* Sensors already enabled. Skip. */
+	if ((reg & mask) == mask)
+		return 0;
+
 	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
 	if (ret)
 		return ret;
 
+	reg |= MEASURE_PERIOD;
+
 	if (priv->num_sensors > 1)
 		reg |= mask | SLP_CLK_ENA | EN;
 	else
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Fix bug in sensor enable for msm8960

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     f1c6aa8f9cbd35f3119d915cd553020495d23f0e
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//f1c6aa8f9cbd35f3119d915cd553020495d23f0e
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:19 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:43 +02:00

thermal/drivers/tsens: Fix bug in sensor enable for msm8960

Device based on tsens VER_0 contains a hardware bug that results in some
problem with sensor enablement. Sensor id 6-11 can't be enabled
selectively and all of them must be enabled in one step.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-6-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens-8960.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 86585f4..95fccca 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -27,9 +27,9 @@
 #define EN			BIT(0)
 #define SW_RST			BIT(1)
 #define SENSOR0_EN		BIT(3)
+#define MEASURE_PERIOD		BIT(18)
 #define SLP_CLK_ENA		BIT(26)
 #define SLP_CLK_ENA_8660	BIT(24)
-#define MEASURE_PERIOD		1
 #define SENSOR0_SHIFT		3
 
 /* INT_STATUS_ADDR bitmasks */
@@ -126,17 +126,34 @@ static int resume_8960(struct tsens_priv *priv)
 static int enable_8960(struct tsens_priv *priv, int id)
 {
 	int ret;
-	u32 reg, mask;
+	u32 reg, mask = BIT(id);
 
 	ret = regmap_read(priv->tm_map, CNTL_ADDR, &reg);
 	if (ret)
 		return ret;
 
-	mask = BIT(id + SENSOR0_SHIFT);
+	/* HARDWARE BUG:
+	 * On platforms with more than 6 sensors, all remaining sensors
+	 * must be enabled together, otherwise undefined results are expected.
+	 * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver,
+	 * all the sensors are enabled in one step hence this bug is not
+	 * triggered.
+	 */
+	if (id > 5)
+		mask = GENMASK(10, 6);
+
+	mask <<= SENSOR0_SHIFT;
+
+	/* Sensors already enabled. Skip. */
+	if ((reg & mask) == mask)
+		return 0;
+
 	ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST);
 	if (ret)
 		return ret;
 
+	reg |= MEASURE_PERIOD;
+
 	if (priv->num_sensors > 1)
 		reg |= mask | SLP_CLK_ENA | EN;
 	else

[PATCH v14 6/9] drivers: thermal: tsens: Replace custom 8960 apis with generic apis

[Ansuel Smith]

Rework calibrate function to use common function. Derive the offset from
a missing hardcoded slope table and the data from the nvmem calib
efuses.
Drop custom get_temp function and use generic api.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c | 56 +++++++++----------------------
 1 file changed, 15 insertions(+), 41 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 95fcccafae14..9cc8a7dd23ae 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -67,6 +67,13 @@
 #define S9_STATUS_OFF		0x3674
 #define S10_STATUS_OFF		0x3678
 
+/* Original slope - 200 to compensate mC to C inaccuracy */
+static u32 tsens_msm8960_slope[] = {
+			976, 976, 954, 976,
+			911, 932, 932, 999,
+			932, 999, 932
+			};
+
 static int suspend_8960(struct tsens_priv *priv)
 {
 	int ret;
@@ -194,9 +201,7 @@ static int calibrate_8960(struct tsens_priv *priv)
 {
 	int i;
 	char *data;
-
-	ssize_t num_read = priv->num_sensors;
-	struct tsens_sensor *s = priv->sensor;
+	u32 p1[11];
 
 	data = qfprom_read(priv->dev, "calib");
 	if (IS_ERR(data))
@@ -204,49 +209,18 @@ static int calibrate_8960(struct tsens_priv *priv)
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
-	for (i = 0; i < num_read; i++, s++)
-		s->offset = data[i];
+	for (i = 0; i < priv->num_sensors; i++) {
+		p1[i] = data[i];
+		priv->sensor[i].slope = tsens_msm8960_slope[i];
+	}
+
+	compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
 
 	kfree(data);
 
 	return 0;
 }
 
-/* Temperature on y axis and ADC-code on x-axis */
-static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
-{
-	int slope, offset;
-
-	slope = thermal_zone_get_slope(s->tzd);
-	offset = CAL_MDEGC - slope * s->offset;
-
-	return adc_code * slope + offset;
-}
-
-static int get_temp_8960(const struct tsens_sensor *s, int *temp)
-{
-	int ret;
-	u32 code, trdy;
-	struct tsens_priv *priv = s->priv;
-	unsigned long timeout;
-
-	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
-	do {
-		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
-		if (ret)
-			return ret;
-		if (!(trdy & TRDY_MASK))
-			continue;
-		ret = regmap_read(priv->tm_map, s->status, &code);
-		if (ret)
-			return ret;
-		*temp = code_to_mdegC(code, s);
-		return 0;
-	} while (time_before(jiffies, timeout));
-
-	return -ETIMEDOUT;
-}
-
 static struct tsens_features tsens_8960_feat = {
 	.ver_major	= VER_0,
 	.crit_int	= 0,
@@ -315,7 +289,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
 static const struct tsens_ops ops_8960 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8960,
-	.get_temp	= get_temp_8960,
+	.get_temp	= get_temp_common,
 	.enable		= enable_8960,
 	.disable	= disable_8960,
 	.suspend	= suspend_8960,
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Replace custom 8960 apis with generic apis

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     7a23894876d8c34b4f1599804ee621cee946d114
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//7a23894876d8c34b4f1599804ee621cee946d114
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:20 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:43 +02:00

thermal/drivers/tsens: Replace custom 8960 apis with generic apis

Rework calibrate function to use common function. Derive the offset from
a missing hardcoded slope table and the data from the nvmem calib
efuses.
Drop custom get_temp function and use generic api.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-7-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens-8960.c | 56 ++++++++----------------------
 1 file changed, 15 insertions(+), 41 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 95fccca..9cc8a7d 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -67,6 +67,13 @@
 #define S9_STATUS_OFF		0x3674
 #define S10_STATUS_OFF		0x3678
 
+/* Original slope - 200 to compensate mC to C inaccuracy */
+static u32 tsens_msm8960_slope[] = {
+			976, 976, 954, 976,
+			911, 932, 932, 999,
+			932, 999, 932
+			};
+
 static int suspend_8960(struct tsens_priv *priv)
 {
 	int ret;
@@ -194,9 +201,7 @@ static int calibrate_8960(struct tsens_priv *priv)
 {
 	int i;
 	char *data;
-
-	ssize_t num_read = priv->num_sensors;
-	struct tsens_sensor *s = priv->sensor;
+	u32 p1[11];
 
 	data = qfprom_read(priv->dev, "calib");
 	if (IS_ERR(data))
@@ -204,49 +209,18 @@ static int calibrate_8960(struct tsens_priv *priv)
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
-	for (i = 0; i < num_read; i++, s++)
-		s->offset = data[i];
+	for (i = 0; i < priv->num_sensors; i++) {
+		p1[i] = data[i];
+		priv->sensor[i].slope = tsens_msm8960_slope[i];
+	}
+
+	compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
 
 	kfree(data);
 
 	return 0;
 }
 
-/* Temperature on y axis and ADC-code on x-axis */
-static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
-{
-	int slope, offset;
-
-	slope = thermal_zone_get_slope(s->tzd);
-	offset = CAL_MDEGC - slope * s->offset;
-
-	return adc_code * slope + offset;
-}
-
-static int get_temp_8960(const struct tsens_sensor *s, int *temp)
-{
-	int ret;
-	u32 code, trdy;
-	struct tsens_priv *priv = s->priv;
-	unsigned long timeout;
-
-	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
-	do {
-		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
-		if (ret)
-			return ret;
-		if (!(trdy & TRDY_MASK))
-			continue;
-		ret = regmap_read(priv->tm_map, s->status, &code);
-		if (ret)
-			return ret;
-		*temp = code_to_mdegC(code, s);
-		return 0;
-	} while (time_before(jiffies, timeout));
-
-	return -ETIMEDOUT;
-}
-
 static struct tsens_features tsens_8960_feat = {
 	.ver_major	= VER_0,
 	.crit_int	= 0,
@@ -315,7 +289,7 @@ static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
 static const struct tsens_ops ops_8960 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8960,
-	.get_temp	= get_temp_8960,
+	.get_temp	= get_temp_common,
 	.enable		= enable_8960,
 	.disable	= disable_8960,
 	.suspend	= suspend_8960,

[PATCH v14 7/9] drivers: thermal: tsens: Drop unused define for msm8960

[Ansuel Smith]

Drop unused define for msm8960 replaced by generic api and reg_field.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 9cc8a7dd23ae..58d09e927383 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -10,8 +10,6 @@
 #include <linux/thermal.h>
 #include "tsens.h"
 
-#define CAL_MDEGC		30000
-
 #define CONFIG_ADDR		0x3640
 #define CONFIG_ADDR_8660	0x3620
 /* CONFIG_ADDR bitmasks */
@@ -21,39 +19,19 @@
 #define CONFIG_SHIFT_8660	28
 #define CONFIG_MASK_8660	(3 << CONFIG_SHIFT_8660)
 
-#define STATUS_CNTL_ADDR_8064	0x3660
 #define CNTL_ADDR		0x3620
 /* CNTL_ADDR bitmasks */
 #define EN			BIT(0)
 #define SW_RST			BIT(1)
-#define SENSOR0_EN		BIT(3)
+
 #define MEASURE_PERIOD		BIT(18)
 #define SLP_CLK_ENA		BIT(26)
 #define SLP_CLK_ENA_8660	BIT(24)
 #define SENSOR0_SHIFT		3
 
-/* INT_STATUS_ADDR bitmasks */
-#define MIN_STATUS_MASK		BIT(0)
-#define LOWER_STATUS_CLR	BIT(1)
-#define UPPER_STATUS_CLR	BIT(2)
-#define MAX_STATUS_MASK		BIT(3)
-
 #define THRESHOLD_ADDR		0x3624
-/* THRESHOLD_ADDR bitmasks */
-#define THRESHOLD_MAX_LIMIT_SHIFT	24
-#define THRESHOLD_MIN_LIMIT_SHIFT	16
-#define THRESHOLD_UPPER_LIMIT_SHIFT	8
-#define THRESHOLD_LOWER_LIMIT_SHIFT	0
-
-/* Initial temperature threshold values */
-#define LOWER_LIMIT_TH		0x50
-#define UPPER_LIMIT_TH		0xdf
-#define MIN_LIMIT_TH		0x0
-#define MAX_LIMIT_TH		0xff
 
 #define INT_STATUS_ADDR		0x363c
-#define TRDY_MASK		BIT(7)
-#define TIMEOUT_US		100
 
 #define S0_STATUS_OFF		0x3628
 #define S1_STATUS_OFF		0x362c
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Drop unused define for msm8960

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     7c5598908aae276f57e2964bd27d868c98538033
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//7c5598908aae276f57e2964bd27d868c98538033
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:21 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:43 +02:00

thermal/drivers/tsens: Drop unused define for msm8960

Drop unused define for msm8960 replaced by generic api and reg_field.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-8-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens-8960.c | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 9cc8a7d..58d09e9 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -10,8 +10,6 @@
 #include <linux/thermal.h>
 #include "tsens.h"
 
-#define CAL_MDEGC		30000
-
 #define CONFIG_ADDR		0x3640
 #define CONFIG_ADDR_8660	0x3620
 /* CONFIG_ADDR bitmasks */
@@ -21,39 +19,19 @@
 #define CONFIG_SHIFT_8660	28
 #define CONFIG_MASK_8660	(3 << CONFIG_SHIFT_8660)
 
-#define STATUS_CNTL_ADDR_8064	0x3660
 #define CNTL_ADDR		0x3620
 /* CNTL_ADDR bitmasks */
 #define EN			BIT(0)
 #define SW_RST			BIT(1)
-#define SENSOR0_EN		BIT(3)
+
 #define MEASURE_PERIOD		BIT(18)
 #define SLP_CLK_ENA		BIT(26)
 #define SLP_CLK_ENA_8660	BIT(24)
 #define SENSOR0_SHIFT		3
 
-/* INT_STATUS_ADDR bitmasks */
-#define MIN_STATUS_MASK		BIT(0)
-#define LOWER_STATUS_CLR	BIT(1)
-#define UPPER_STATUS_CLR	BIT(2)
-#define MAX_STATUS_MASK		BIT(3)
-
 #define THRESHOLD_ADDR		0x3624
-/* THRESHOLD_ADDR bitmasks */
-#define THRESHOLD_MAX_LIMIT_SHIFT	24
-#define THRESHOLD_MIN_LIMIT_SHIFT	16
-#define THRESHOLD_UPPER_LIMIT_SHIFT	8
-#define THRESHOLD_LOWER_LIMIT_SHIFT	0
-
-/* Initial temperature threshold values */
-#define LOWER_LIMIT_TH		0x50
-#define UPPER_LIMIT_TH		0xdf
-#define MIN_LIMIT_TH		0x0
-#define MAX_LIMIT_TH		0xff
 
 #define INT_STATUS_ADDR		0x363c
-#define TRDY_MASK		BIT(7)
-#define TIMEOUT_US		100
 
 #define S0_STATUS_OFF		0x3628
 #define S1_STATUS_OFF		0x362c

[PATCH v14 8/9] drivers: thermal: tsens: Add support for ipq8064-tsens

[Ansuel Smith]

Add support for tsens present in ipq806x SoCs based on generic msm8960
tsens driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 38b9936def1a..58073dc5d30b 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -966,6 +966,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
 
 static const struct of_device_id tsens_table[] = {
 	{
+		.compatible = "qcom,ipq8064-tsens",
+		.data = &data_8960,
+	}, {
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
 	}, {
-- 
2.30.2

[thermal: thermal/next] thermal/drivers/tsens: Add support for ipq8064-tsens

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     0960379da3629895a96cea0decae412fa570fea8
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//0960379da3629895a96cea0decae412fa570fea8
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:22 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:43 +02:00

thermal/drivers/tsens: Add support for ipq8064-tsens

Add support for tsens present in ipq806x SoCs based on generic msm8960
tsens driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-9-ansuelsmth@gmail.com
---
 drivers/thermal/qcom/tsens.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 54382c6..139e580 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -968,6 +968,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
 
 static const struct of_device_id tsens_table[] = {
 	{
+		.compatible = "qcom,ipq8064-tsens",
+		.data = &data_8960,
+	}, {
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
 	}, {

[PATCH v14 9/9] dt-bindings: thermal: tsens: Document ipq8064 bindings

[Ansuel Smith]

Document the use of bindings used for msm8960 tsens based devices.
msm8960 use the same gcc regs and is set as a child of the qcom gcc.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/thermal/qcom-tsens.yaml          | 56 ++++++++++++++++---
 1 file changed, 48 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 95462e071ab4..1785b1c75a3c 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -19,6 +19,11 @@ description: |
 properties:
   compatible:
     oneOf:
+      - description: msm9860 TSENS based
+        items:
+          - enum:
+              - qcom,ipq8064-tsens
+
       - description: v0.1 of TSENS
         items:
           - enum:
@@ -73,7 +78,9 @@ properties:
     maxItems: 2
     items:
       - const: calib
-      - const: calib_sel
+      - enum:
+          - calib_backup
+          - calib_sel
 
   "#qcom,sensors":
     description:
@@ -88,12 +95,20 @@ properties:
       Number of cells required to uniquely identify the thermal sensors. Since
       we have multiple sensors this is set to 1
 
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - "#qcom,sensors"
+
 allOf:
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8064-tsens
               - qcom,msm8916-tsens
               - qcom,msm8974-tsens
               - qcom,msm8976-tsens
@@ -114,17 +129,42 @@ allOf:
         interrupt-names:
           minItems: 2
 
-required:
-  - compatible
-  - reg
-  - "#qcom,sensors"
-  - interrupts
-  - interrupt-names
-  - "#thermal-sensor-cells"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+              - qcom,tsens-v2
+
+    then:
+      required:
+        - reg
 
 additionalProperties: false
 
 examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    gcc: clock-controller {
+
+           /* ... */
+
+           tsens: thermal-sensor {
+                compatible = "qcom,ipq8064-tsens";
+
+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+                 nvmem-cell-names = "calib", "calib_backup";
+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                 interrupt-names = "uplow";
+
+                 #qcom,sensors = <11>;
+                 #thermal-sensor-cells = <1>;
+          };
+    };
+
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
-- 
2.30.2

[thermal: thermal/next] dt-bindings: thermal: tsens: Document ipq8064 bindings

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     33edf3a534d5b54cc7dd763fef1899c75b5b7e49
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//33edf3a534d5b54cc7dd763fef1899c75b5b7e49
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Sun, 04 Apr 2021 16:48:23 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 15 Apr 2021 13:21:43 +02:00

dt-bindings: thermal: tsens: Document ipq8064 bindings

Document the use of bindings used for msm8960 tsens based devices.
msm8960 use the same gcc regs and is set as a child of the qcom gcc.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210404144823.31867-10-ansuelsmth@gmail.com
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 55 +++++--
 1 file changed, 47 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index fbd03cd..b7a832f 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -19,6 +19,11 @@ description: |
 properties:
   compatible:
     oneOf:
+      - description: msm9860 TSENS based
+        items:
+          - enum:
+              - qcom,ipq8064-tsens
+
       - description: v0.1 of TSENS
         items:
           - enum:
@@ -75,7 +80,9 @@ properties:
     maxItems: 2
     items:
       - const: calib
-      - const: calib_sel
+      - enum:
+          - calib_backup
+          - calib_sel
 
   "#qcom,sensors":
     description:
@@ -90,12 +97,19 @@ properties:
       Number of cells required to uniquely identify the thermal sensors. Since
       we have multiple sensors this is set to 1
 
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - "#qcom,sensors"
 allOf:
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8064-tsens
               - qcom,mdm9607-tsens
               - qcom,msm8916-tsens
               - qcom,msm8974-tsens
@@ -117,19 +131,44 @@ allOf:
         interrupt-names:
           minItems: 2
 
-required:
-  - compatible
-  - reg
-  - "#qcom,sensors"
-  - interrupts
-  - interrupt-names
-  - "#thermal-sensor-cells"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+              - qcom,tsens-v2
+
+    then:
+      required:
+        - reg
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    gcc: clock-controller {
+
+           /* ... */
+
+           tsens: thermal-sensor {
+                compatible = "qcom,ipq8064-tsens";
+
+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+                 nvmem-cell-names = "calib", "calib_backup";
+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                 interrupt-names = "uplow";
+
+                 #qcom,sensors = <11>;
+                 #thermal-sensor-cells = <1>;
+          };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
     tsens1: thermal-sensor@900000 {
            compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";

Re: [PATCH v14 0/9] Add support for ipq8064 tsens

[Daniel Lezcano]

On 04/04/2021 16:48, Ansuel Smith wrote:
> This patchset convert msm8960 to reg_filed, use int_common instead 
> of a custom function and fix wrong tsens get_temp function for msm8960.
> Ipq8064 SoCs tsens driver is based on 8960 tsens driver. Ipq8064 needs
> to be registered as a gcc child as the tsens regs on this platform are
> shared with the controller.
> This is based on work and code here
> https://git.linaro.org/people/amit.kucheria/kernel.git/log/?h=wrk3/tsens-8960-breakage

Applied, the series.

Fixed a minor conflict with patch 9/9 and "dt-bindings: thermal:
qcom-tsens: Add compatible for sm8350"

Thanks

  -- Daniel

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

[thermal PATCH v15 9/9] dt-bindings: thermal: tsens: Document ipq8064 bindings

[Ansuel Smith]

Document the use of bindings used for msm8960 tsens based devices.
msm8960 use the same gcc regs and is set as a child of the qcom gcc.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/thermal/qcom-tsens.yaml          | 56 ++++++++++++++++---
 1 file changed, 48 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d7be931b4..2e762596b 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -19,6 +19,11 @@ description: |
 properties:
   compatible:
     oneOf:
+      - description: msm9860 TSENS based
+        items:
+          - enum:
+              - qcom,ipq8064-tsens
+
       - description: v0.1 of TSENS
         items:
           - enum:
@@ -70,7 +75,9 @@ properties:
     maxItems: 2
     items:
       - const: calib
-      - const: calib_sel
+      - enum:
+          - calib_backup
+          - calib_sel
 
   "#qcom,sensors":
     description:
@@ -85,12 +92,20 @@ properties:
       Number of cells required to uniquely identify the thermal sensors. Since
       we have multiple sensors this is set to 1
 
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - "#qcom,sensors"
+
 allOf:
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8064-tsens
               - qcom,msm8916-tsens
               - qcom,msm8974-tsens
               - qcom,msm8976-tsens
@@ -111,17 +126,42 @@ allOf:
         interrupt-names:
           minItems: 2
 
-required:
-  - compatible
-  - reg
-  - "#qcom,sensors"
-  - interrupts
-  - interrupt-names
-  - "#thermal-sensor-cells"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+              - qcom,tsens-v2
+
+    then:
+      required:
+        - reg
 
 additionalProperties: false
 
 examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    gcc: clock-controller {
+
+           /* ... */
+
+           tsens: thermal-sensor {
+                compatible = "qcom,ipq8064-tsens";
+
+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+                 nvmem-cell-names = "calib", "calib_backup";
+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                 interrupt-names = "uplow";
+
+                 #qcom,sensors = <11>;
+                 #thermal-sensor-cells = <1>;
+          };
+    };
+
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
-- 
2.30.2

[thermal: thermal/next] dt-bindings: thermal: tsens: Document ipq8064 bindings

[thermal-bot for Ansuel Smith]

The following commit has been merged into the thermal/next branch of thermal:

Commit-ID:     26b2f03d2adf43d0dc9aeeb3fff54dcc9fcdb1f4
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git//26b2f03d2adf43d0dc9aeeb3fff54dcc9fcdb1f4
Author:        Ansuel Smith <ansuelsmth@gmail.com>
AuthorDate:    Tue, 20 Apr 2021 20:33:43 +02:00
Committer:     Daniel Lezcano <daniel.lezcano@linaro.org>
CommitterDate: Thu, 22 Apr 2021 14:10:24 +02:00

dt-bindings: thermal: tsens: Document ipq8064 bindings

Document the use of bindings used for msm8960 tsens based devices.
msm8960 use the same gcc regs and is set as a child of the qcom gcc.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210420183343.2272-10-ansuelsmth@gmail.com
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 56 ++++++-
 1 file changed, 48 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index fbd03cd..0242fd9 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -19,6 +19,11 @@ description: |
 properties:
   compatible:
     oneOf:
+      - description: msm9860 TSENS based
+        items:
+          - enum:
+              - qcom,ipq8064-tsens
+
       - description: v0.1 of TSENS
         items:
           - enum:
@@ -75,7 +80,9 @@ properties:
     maxItems: 2
     items:
       - const: calib
-      - const: calib_sel
+      - enum:
+          - calib_backup
+          - calib_sel
 
   "#qcom,sensors":
     description:
@@ -90,12 +97,20 @@ properties:
       Number of cells required to uniquely identify the thermal sensors. Since
       we have multiple sensors this is set to 1
 
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - "#qcom,sensors"
+
 allOf:
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8064-tsens
               - qcom,mdm9607-tsens
               - qcom,msm8916-tsens
               - qcom,msm8974-tsens
@@ -117,19 +132,44 @@ allOf:
         interrupt-names:
           minItems: 2
 
-required:
-  - compatible
-  - reg
-  - "#qcom,sensors"
-  - interrupts
-  - interrupt-names
-  - "#thermal-sensor-cells"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+              - qcom,tsens-v2
+
+    then:
+      required:
+        - reg
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    gcc: clock-controller {
+
+           /* ... */
+
+           tsens: thermal-sensor {
+                compatible = "qcom,ipq8064-tsens";
+
+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+                 nvmem-cell-names = "calib", "calib_backup";
+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                 interrupt-names = "uplow";
+
+                 #qcom,sensors = <11>;
+                 #thermal-sensor-cells = <1>;
+          };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
     tsens1: thermal-sensor@900000 {
            compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";