From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>, <robh@kernel.org>, Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Subject: [PATCH v2 11/19] ath11k: HAL changes to support WCN6750 Date: Sun, 16 Jan 2022 18:17:07 +0530 [thread overview] Message-ID: <1642337235-8618-12-git-send-email-quic_mpubbise@quicinc.com> (raw) In-Reply-To: <1642337235-8618-1-git-send-email-quic_mpubbise@quicinc.com> Add HAL changes required to support WCN6750. Offsets of some registers for WCN6750 are different from other supported devices; move such register offsets to platform specific ath11k_hw_regs. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 2 + drivers/net/wireless/ath/ath11k/hal.c | 15 ++-- drivers/net/wireless/ath/ath11k/hal.h | 15 ++-- drivers/net/wireless/ath/ath11k/hw.c | 134 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath11k/hw.h | 11 +++ 5 files changed, 164 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 3acc3e4..347131a 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -418,8 +418,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { }, .max_radios = 1, .bdf_addr = 0x4B0C0000, + .hw_ops = &wcn6750_ops, .ring_mask = &ath11k_hw_ring_mask_qca6390, .internal_sleep_clock = false, + .regs = &wcn6750_regs, .qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750, .host_ce_config = ath11k_host_ce_config_qca6390, .ce_count = 9, diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c index 2ec09ae..9a6340d 100644 --- a/drivers/net/wireless/ath/ath11k/hal.c +++ b/drivers/net/wireless/ath/ath11k/hal.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause-Clear /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/dma-mapping.h> #include "hal_tx.h" @@ -1082,10 +1083,10 @@ static void ath11k_hal_srng_update_hp_tp_addr(struct ath11k_base *ab, srng = &hal->srng_list[ring_id]; if (srng_config->ring_dir == HAL_SRNG_DIR_DST) - srng->u.dst_ring.tp_addr = (u32 *)(HAL_SHADOW_REG(shadow_cfg_idx) + + srng->u.dst_ring.tp_addr = (u32 *)(HAL_SHADOW_REG(ab, shadow_cfg_idx) + (unsigned long)ab->mem); else - srng->u.src_ring.hp_addr = (u32 *)(HAL_SHADOW_REG(shadow_cfg_idx) + + srng->u.src_ring.hp_addr = (u32 *)(HAL_SHADOW_REG(ab, shadow_cfg_idx) + (unsigned long)ab->mem); } @@ -1120,7 +1121,7 @@ int ath11k_hal_srng_update_shadow_config(struct ath11k_base *ab, ath11k_dbg(ab, ATH11k_DBG_HAL, "target_reg %x, shadow reg 0x%x shadow_idx 0x%x, ring_type %d, ring num %d", target_reg, - HAL_SHADOW_REG(shadow_cfg_idx), + HAL_SHADOW_REG(ab, shadow_cfg_idx), shadow_cfg_idx, ring_type, ring_num); @@ -1193,12 +1194,12 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab) s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_TCL_RING_HP(ab); s = &hal->srng_config[HAL_REO_REINJECT]; - s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_BASE_LSB; - s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_HP; + s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_BASE_LSB(ab); + s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_HP(ab); s = &hal->srng_config[HAL_REO_CMD]; - s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_RING_BASE_LSB; - s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_HP; + s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_RING_BASE_LSB(ab); + s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_HP(ab); s = &hal->srng_config[HAL_REO_STATUS]; s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_STATUS_RING_BASE_LSB(ab); diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h index a7d9b4c..6fbda01 100644 --- a/drivers/net/wireless/ath/ath11k/hal.h +++ b/drivers/net/wireless/ath/ath11k/hal.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef ATH11K_HAL_H @@ -31,12 +32,12 @@ struct ath11k_base; #define HAL_DSCP_TID_TBL_SIZE 24 /* calculate the register address from bar0 of shadow register x */ -#define HAL_SHADOW_BASE_ADDR 0x000008fc +#define HAL_SHADOW_BASE_ADDR(ab) ab->hw_params.regs->hal_shadow_base_addr #define HAL_SHADOW_NUM_REGS 36 #define HAL_HP_OFFSET_IN_REG_START 1 #define HAL_OFFSET_FROM_HP_TO_TP 4 -#define HAL_SHADOW_REG(x) (HAL_SHADOW_BASE_ADDR + (4 * (x))) +#define HAL_SHADOW_REG(ab, x) (HAL_SHADOW_BASE_ADDR(ab) + (4 * (x))) /* WCSS Relative address */ #define HAL_SEQ_WCSS_UMAC_OFFSET 0x00a00000 @@ -180,16 +181,18 @@ struct ath11k_base; #define HAL_REO_TCL_RING_HP(ab) ab->hw_params.regs->hal_reo_tcl_ring_hp /* REO CMD R0 address */ -#define HAL_REO_CMD_RING_BASE_LSB 0x00000194 +#define HAL_REO_CMD_RING_BASE_LSB(ab) \ + ab->hw_params.regs->hal_reo_cmd_ring_base_lsb /* REO CMD R2 address */ -#define HAL_REO_CMD_HP 0x00003020 +#define HAL_REO_CMD_HP(ab) ab->hw_params.regs->hal_reo_cmd_ring_hp /* SW2REO R0 address */ -#define HAL_SW2REO_RING_BASE_LSB 0x000001ec +#define HAL_SW2REO_RING_BASE_LSB(ab) \ + ab->hw_params.regs->hal_sw2reo_ring_base_lsb /* SW2REO R2 address */ -#define HAL_SW2REO_RING_HP 0x00003028 +#define HAL_SW2REO_RING_HP(ab) ab->hw_params.regs->hal_sw2reo_ring_hp /* CE ring R0 address */ #define HAL_CE_DST_RING_BASE_LSB 0x00000000 diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c index b7e3b66..8d921a6 100644 --- a/drivers/net/wireless/ath/ath11k/hw.c +++ b/drivers/net/wireless/ath/ath11k/hw.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause-Clear /* * Copyright (c) 2018-2020 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/types.h> @@ -1007,6 +1008,13 @@ const struct ath11k_hw_ops wcn6855_ops = { .rx_desc_mpdu_start_addr2 = ath11k_hw_wcn6855_rx_desc_mpdu_start_addr2, }; +const struct ath11k_hw_ops wcn6750_ops = { + .get_hw_mac_from_pdev_id = ath11k_hw_ipq8074_mac_from_pdev_id, + .wmi_init_config = ath11k_init_wmi_config_qca6390, + .mac_id_to_pdev_id = ath11k_hw_mac_id_to_pdev_id_qca6390, + .mac_id_to_srng_id = ath11k_hw_mac_id_to_srng_id_qca6390, +}; + #define ATH11K_TX_RING_MASK_0 0x1 #define ATH11K_TX_RING_MASK_1 0x2 #define ATH11K_TX_RING_MASK_2 0x4 @@ -1901,10 +1909,18 @@ const struct ath11k_hw_regs ipq8074_regs = { .hal_reo_tcl_ring_base_lsb = 0x000003fc, .hal_reo_tcl_ring_hp = 0x00003058, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x00000504, .hal_reo_status_hp = 0x00003070, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x00a00000, .hal_seq_wcss_umac_ce0_dst_reg = 0x00a01000, @@ -1925,6 +1941,9 @@ const struct ath11k_hw_regs ipq8074_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x0, .pcie_pcs_osc_dtct_config_base = 0x0, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x0, }; const struct ath11k_hw_regs qca6390_regs = { @@ -1972,10 +1991,18 @@ const struct ath11k_hw_regs qca6390_regs = { .hal_reo_tcl_ring_base_lsb = 0x000003a4, .hal_reo_tcl_ring_hp = 0x00003050, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x000004ac, .hal_reo_status_hp = 0x00003068, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x00a00000, .hal_seq_wcss_umac_ce0_dst_reg = 0x00a01000, @@ -1996,6 +2023,9 @@ const struct ath11k_hw_regs qca6390_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x01e0c0ac, .pcie_pcs_osc_dtct_config_base = 0x01e0c628, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x000008fc, }; const struct ath11k_hw_regs qcn9074_regs = { @@ -2043,10 +2073,18 @@ const struct ath11k_hw_regs qcn9074_regs = { .hal_reo_tcl_ring_base_lsb = 0x000003fc, .hal_reo_tcl_ring_hp = 0x00003058, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x00000504, .hal_reo_status_hp = 0x00003070, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x01b80000, .hal_seq_wcss_umac_ce0_dst_reg = 0x01b81000, @@ -2067,6 +2105,9 @@ const struct ath11k_hw_regs qcn9074_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x01e0e0a8, .pcie_pcs_osc_dtct_config_base = 0x01e0f45c, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x0, }; const struct ath11k_hw_regs wcn6855_regs = { @@ -2114,10 +2155,18 @@ const struct ath11k_hw_regs wcn6855_regs = { .hal_reo_tcl_ring_base_lsb = 0x00000454, .hal_reo_tcl_ring_hp = 0x00003060, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x0000055c, .hal_reo_status_hp = 0x00003078, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x1b80000, .hal_seq_wcss_umac_ce0_dst_reg = 0x1b81000, @@ -2138,6 +2187,91 @@ const struct ath11k_hw_regs wcn6855_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x01e0c0ac, .pcie_pcs_osc_dtct_config_base = 0x01e0c628, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x000008fc, +}; + +const struct ath11k_hw_regs wcn6750_regs = { + /* SW2TCL(x) R0 ring configuration address */ + .hal_tcl1_ring_base_lsb = 0x00000694, + .hal_tcl1_ring_base_msb = 0x00000698, + .hal_tcl1_ring_id = 0x0000069c, + .hal_tcl1_ring_misc = 0x000006a4, + .hal_tcl1_ring_tp_addr_lsb = 0x000006b0, + .hal_tcl1_ring_tp_addr_msb = 0x000006b4, + .hal_tcl1_ring_consumer_int_setup_ix0 = 0x000006c4, + .hal_tcl1_ring_consumer_int_setup_ix1 = 0x000006c8, + .hal_tcl1_ring_msi1_base_lsb = 0x000006dc, + .hal_tcl1_ring_msi1_base_msb = 0x000006e0, + .hal_tcl1_ring_msi1_data = 0x000006e4, + .hal_tcl2_ring_base_lsb = 0x000006ec, + .hal_tcl_ring_base_lsb = 0x0000079c, + + /* TCL STATUS ring address */ + .hal_tcl_status_ring_base_lsb = 0x000008a4, + + /* REO2SW(x) R0 ring configuration address */ + .hal_reo1_ring_base_lsb = 0x000001ec, + .hal_reo1_ring_base_msb = 0x000001f0, + .hal_reo1_ring_id = 0x000001f4, + .hal_reo1_ring_misc = 0x000001fc, + .hal_reo1_ring_hp_addr_lsb = 0x00000200, + .hal_reo1_ring_hp_addr_msb = 0x00000204, + .hal_reo1_ring_producer_int_setup = 0x00000210, + .hal_reo1_ring_msi1_base_lsb = 0x00000234, + .hal_reo1_ring_msi1_base_msb = 0x00000238, + .hal_reo1_ring_msi1_data = 0x0000023c, + .hal_reo2_ring_base_lsb = 0x00000244, + .hal_reo1_aging_thresh_ix_0 = 0x00000564, + .hal_reo1_aging_thresh_ix_1 = 0x00000568, + .hal_reo1_aging_thresh_ix_2 = 0x0000056c, + .hal_reo1_aging_thresh_ix_3 = 0x00000570, + + /* REO2SW(x) R2 ring pointers (head/tail) address */ + .hal_reo1_ring_hp = 0x00003028, + .hal_reo1_ring_tp = 0x0000302c, + .hal_reo2_ring_hp = 0x00003030, + + /* REO2TCL R0 ring configuration address */ + .hal_reo_tcl_ring_base_lsb = 0x000003fc, + .hal_reo_tcl_ring_hp = 0x00003058, + + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x000000e4, + .hal_reo_cmd_ring_hp = 0x00003010, + + /* REO status address */ + .hal_reo_status_ring_base_lsb = 0x00000504, + .hal_reo_status_hp = 0x00003070, + + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x0000013c, + .hal_sw2reo_ring_hp = 0x00003018, + + /* WCSS relative address */ + .hal_seq_wcss_umac_ce0_src_reg = 0x01b80000, + .hal_seq_wcss_umac_ce0_dst_reg = 0x01b81000, + .hal_seq_wcss_umac_ce1_src_reg = 0x01b82000, + .hal_seq_wcss_umac_ce1_dst_reg = 0x01b83000, + + /* WBM Idle address */ + .hal_wbm_idle_link_ring_base_lsb = 0x00000874, + .hal_wbm_idle_link_ring_misc = 0x00000884, + + /* SW2WBM release address */ + .hal_wbm_release_ring_base_lsb = 0x000001ec, + + /* WBM2SW release address */ + .hal_wbm0_release_ring_base_lsb = 0x00000924, + .hal_wbm1_release_ring_base_lsb = 0x0000097c, + + /* PCIe base address */ + .pcie_qserdes_sysclk_en_sel = 0x0, + .pcie_pcs_osc_dtct_config_base = 0x0, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x00000504, }; const struct ath11k_hw_hal_params ath11k_hw_hal_params_ipq8074 = { diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h index ab258a0..cb48d52 100644 --- a/drivers/net/wireless/ath/ath11k/hw.h +++ b/drivers/net/wireless/ath/ath11k/hw.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef ATH11K_HW_H @@ -240,6 +241,7 @@ extern const struct ath11k_hw_ops ipq6018_ops; extern const struct ath11k_hw_ops qca6390_ops; extern const struct ath11k_hw_ops qcn9074_ops; extern const struct ath11k_hw_ops wcn6855_ops; +extern const struct ath11k_hw_ops wcn6750_ops; extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_ipq8074; extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qca6390; @@ -336,6 +338,12 @@ struct ath11k_hw_regs { u32 hal_reo_status_ring_base_lsb; u32 hal_reo_status_hp; + u32 hal_reo_cmd_ring_base_lsb; + u32 hal_reo_cmd_ring_hp; + + u32 hal_sw2reo_ring_base_lsb; + u32 hal_sw2reo_ring_hp; + u32 hal_seq_wcss_umac_ce0_src_reg; u32 hal_seq_wcss_umac_ce0_dst_reg; u32 hal_seq_wcss_umac_ce1_src_reg; @@ -351,11 +359,14 @@ struct ath11k_hw_regs { u32 pcie_qserdes_sysclk_en_sel; u32 pcie_pcs_osc_dtct_config_base; + + u32 hal_shadow_base_addr; }; extern const struct ath11k_hw_regs ipq8074_regs; extern const struct ath11k_hw_regs qca6390_regs; extern const struct ath11k_hw_regs qcn9074_regs; extern const struct ath11k_hw_regs wcn6855_regs; +extern const struct ath11k_hw_regs wcn6750_regs; #endif -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>, <robh@kernel.org>, Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Subject: [PATCH v2 11/19] ath11k: HAL changes to support WCN6750 Date: Sun, 16 Jan 2022 18:17:07 +0530 [thread overview] Message-ID: <1642337235-8618-12-git-send-email-quic_mpubbise@quicinc.com> (raw) In-Reply-To: <1642337235-8618-1-git-send-email-quic_mpubbise@quicinc.com> Add HAL changes required to support WCN6750. Offsets of some registers for WCN6750 are different from other supported devices; move such register offsets to platform specific ath11k_hw_regs. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/core.c | 2 + drivers/net/wireless/ath/ath11k/hal.c | 15 ++-- drivers/net/wireless/ath/ath11k/hal.h | 15 ++-- drivers/net/wireless/ath/ath11k/hw.c | 134 +++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath11k/hw.h | 11 +++ 5 files changed, 164 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 3acc3e4..347131a 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -418,8 +418,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { }, .max_radios = 1, .bdf_addr = 0x4B0C0000, + .hw_ops = &wcn6750_ops, .ring_mask = &ath11k_hw_ring_mask_qca6390, .internal_sleep_clock = false, + .regs = &wcn6750_regs, .qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750, .host_ce_config = ath11k_host_ce_config_qca6390, .ce_count = 9, diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c index 2ec09ae..9a6340d 100644 --- a/drivers/net/wireless/ath/ath11k/hal.c +++ b/drivers/net/wireless/ath/ath11k/hal.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause-Clear /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/dma-mapping.h> #include "hal_tx.h" @@ -1082,10 +1083,10 @@ static void ath11k_hal_srng_update_hp_tp_addr(struct ath11k_base *ab, srng = &hal->srng_list[ring_id]; if (srng_config->ring_dir == HAL_SRNG_DIR_DST) - srng->u.dst_ring.tp_addr = (u32 *)(HAL_SHADOW_REG(shadow_cfg_idx) + + srng->u.dst_ring.tp_addr = (u32 *)(HAL_SHADOW_REG(ab, shadow_cfg_idx) + (unsigned long)ab->mem); else - srng->u.src_ring.hp_addr = (u32 *)(HAL_SHADOW_REG(shadow_cfg_idx) + + srng->u.src_ring.hp_addr = (u32 *)(HAL_SHADOW_REG(ab, shadow_cfg_idx) + (unsigned long)ab->mem); } @@ -1120,7 +1121,7 @@ int ath11k_hal_srng_update_shadow_config(struct ath11k_base *ab, ath11k_dbg(ab, ATH11k_DBG_HAL, "target_reg %x, shadow reg 0x%x shadow_idx 0x%x, ring_type %d, ring num %d", target_reg, - HAL_SHADOW_REG(shadow_cfg_idx), + HAL_SHADOW_REG(ab, shadow_cfg_idx), shadow_cfg_idx, ring_type, ring_num); @@ -1193,12 +1194,12 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab) s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_TCL_RING_HP(ab); s = &hal->srng_config[HAL_REO_REINJECT]; - s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_BASE_LSB; - s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_HP; + s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_BASE_LSB(ab); + s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_HP(ab); s = &hal->srng_config[HAL_REO_CMD]; - s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_RING_BASE_LSB; - s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_HP; + s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_RING_BASE_LSB(ab); + s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_HP(ab); s = &hal->srng_config[HAL_REO_STATUS]; s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_STATUS_RING_BASE_LSB(ab); diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h index a7d9b4c..6fbda01 100644 --- a/drivers/net/wireless/ath/ath11k/hal.h +++ b/drivers/net/wireless/ath/ath11k/hal.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef ATH11K_HAL_H @@ -31,12 +32,12 @@ struct ath11k_base; #define HAL_DSCP_TID_TBL_SIZE 24 /* calculate the register address from bar0 of shadow register x */ -#define HAL_SHADOW_BASE_ADDR 0x000008fc +#define HAL_SHADOW_BASE_ADDR(ab) ab->hw_params.regs->hal_shadow_base_addr #define HAL_SHADOW_NUM_REGS 36 #define HAL_HP_OFFSET_IN_REG_START 1 #define HAL_OFFSET_FROM_HP_TO_TP 4 -#define HAL_SHADOW_REG(x) (HAL_SHADOW_BASE_ADDR + (4 * (x))) +#define HAL_SHADOW_REG(ab, x) (HAL_SHADOW_BASE_ADDR(ab) + (4 * (x))) /* WCSS Relative address */ #define HAL_SEQ_WCSS_UMAC_OFFSET 0x00a00000 @@ -180,16 +181,18 @@ struct ath11k_base; #define HAL_REO_TCL_RING_HP(ab) ab->hw_params.regs->hal_reo_tcl_ring_hp /* REO CMD R0 address */ -#define HAL_REO_CMD_RING_BASE_LSB 0x00000194 +#define HAL_REO_CMD_RING_BASE_LSB(ab) \ + ab->hw_params.regs->hal_reo_cmd_ring_base_lsb /* REO CMD R2 address */ -#define HAL_REO_CMD_HP 0x00003020 +#define HAL_REO_CMD_HP(ab) ab->hw_params.regs->hal_reo_cmd_ring_hp /* SW2REO R0 address */ -#define HAL_SW2REO_RING_BASE_LSB 0x000001ec +#define HAL_SW2REO_RING_BASE_LSB(ab) \ + ab->hw_params.regs->hal_sw2reo_ring_base_lsb /* SW2REO R2 address */ -#define HAL_SW2REO_RING_HP 0x00003028 +#define HAL_SW2REO_RING_HP(ab) ab->hw_params.regs->hal_sw2reo_ring_hp /* CE ring R0 address */ #define HAL_CE_DST_RING_BASE_LSB 0x00000000 diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c index b7e3b66..8d921a6 100644 --- a/drivers/net/wireless/ath/ath11k/hw.c +++ b/drivers/net/wireless/ath/ath11k/hw.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause-Clear /* * Copyright (c) 2018-2020 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/types.h> @@ -1007,6 +1008,13 @@ const struct ath11k_hw_ops wcn6855_ops = { .rx_desc_mpdu_start_addr2 = ath11k_hw_wcn6855_rx_desc_mpdu_start_addr2, }; +const struct ath11k_hw_ops wcn6750_ops = { + .get_hw_mac_from_pdev_id = ath11k_hw_ipq8074_mac_from_pdev_id, + .wmi_init_config = ath11k_init_wmi_config_qca6390, + .mac_id_to_pdev_id = ath11k_hw_mac_id_to_pdev_id_qca6390, + .mac_id_to_srng_id = ath11k_hw_mac_id_to_srng_id_qca6390, +}; + #define ATH11K_TX_RING_MASK_0 0x1 #define ATH11K_TX_RING_MASK_1 0x2 #define ATH11K_TX_RING_MASK_2 0x4 @@ -1901,10 +1909,18 @@ const struct ath11k_hw_regs ipq8074_regs = { .hal_reo_tcl_ring_base_lsb = 0x000003fc, .hal_reo_tcl_ring_hp = 0x00003058, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x00000504, .hal_reo_status_hp = 0x00003070, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x00a00000, .hal_seq_wcss_umac_ce0_dst_reg = 0x00a01000, @@ -1925,6 +1941,9 @@ const struct ath11k_hw_regs ipq8074_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x0, .pcie_pcs_osc_dtct_config_base = 0x0, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x0, }; const struct ath11k_hw_regs qca6390_regs = { @@ -1972,10 +1991,18 @@ const struct ath11k_hw_regs qca6390_regs = { .hal_reo_tcl_ring_base_lsb = 0x000003a4, .hal_reo_tcl_ring_hp = 0x00003050, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x000004ac, .hal_reo_status_hp = 0x00003068, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x00a00000, .hal_seq_wcss_umac_ce0_dst_reg = 0x00a01000, @@ -1996,6 +2023,9 @@ const struct ath11k_hw_regs qca6390_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x01e0c0ac, .pcie_pcs_osc_dtct_config_base = 0x01e0c628, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x000008fc, }; const struct ath11k_hw_regs qcn9074_regs = { @@ -2043,10 +2073,18 @@ const struct ath11k_hw_regs qcn9074_regs = { .hal_reo_tcl_ring_base_lsb = 0x000003fc, .hal_reo_tcl_ring_hp = 0x00003058, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x00000504, .hal_reo_status_hp = 0x00003070, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x01b80000, .hal_seq_wcss_umac_ce0_dst_reg = 0x01b81000, @@ -2067,6 +2105,9 @@ const struct ath11k_hw_regs qcn9074_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x01e0e0a8, .pcie_pcs_osc_dtct_config_base = 0x01e0f45c, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x0, }; const struct ath11k_hw_regs wcn6855_regs = { @@ -2114,10 +2155,18 @@ const struct ath11k_hw_regs wcn6855_regs = { .hal_reo_tcl_ring_base_lsb = 0x00000454, .hal_reo_tcl_ring_hp = 0x00003060, + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x00000194, + .hal_reo_cmd_ring_hp = 0x00003020, + /* REO status address */ .hal_reo_status_ring_base_lsb = 0x0000055c, .hal_reo_status_hp = 0x00003078, + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x000001ec, + .hal_sw2reo_ring_hp = 0x00003028, + /* WCSS relative address */ .hal_seq_wcss_umac_ce0_src_reg = 0x1b80000, .hal_seq_wcss_umac_ce0_dst_reg = 0x1b81000, @@ -2138,6 +2187,91 @@ const struct ath11k_hw_regs wcn6855_regs = { /* PCIe base address */ .pcie_qserdes_sysclk_en_sel = 0x01e0c0ac, .pcie_pcs_osc_dtct_config_base = 0x01e0c628, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x000008fc, +}; + +const struct ath11k_hw_regs wcn6750_regs = { + /* SW2TCL(x) R0 ring configuration address */ + .hal_tcl1_ring_base_lsb = 0x00000694, + .hal_tcl1_ring_base_msb = 0x00000698, + .hal_tcl1_ring_id = 0x0000069c, + .hal_tcl1_ring_misc = 0x000006a4, + .hal_tcl1_ring_tp_addr_lsb = 0x000006b0, + .hal_tcl1_ring_tp_addr_msb = 0x000006b4, + .hal_tcl1_ring_consumer_int_setup_ix0 = 0x000006c4, + .hal_tcl1_ring_consumer_int_setup_ix1 = 0x000006c8, + .hal_tcl1_ring_msi1_base_lsb = 0x000006dc, + .hal_tcl1_ring_msi1_base_msb = 0x000006e0, + .hal_tcl1_ring_msi1_data = 0x000006e4, + .hal_tcl2_ring_base_lsb = 0x000006ec, + .hal_tcl_ring_base_lsb = 0x0000079c, + + /* TCL STATUS ring address */ + .hal_tcl_status_ring_base_lsb = 0x000008a4, + + /* REO2SW(x) R0 ring configuration address */ + .hal_reo1_ring_base_lsb = 0x000001ec, + .hal_reo1_ring_base_msb = 0x000001f0, + .hal_reo1_ring_id = 0x000001f4, + .hal_reo1_ring_misc = 0x000001fc, + .hal_reo1_ring_hp_addr_lsb = 0x00000200, + .hal_reo1_ring_hp_addr_msb = 0x00000204, + .hal_reo1_ring_producer_int_setup = 0x00000210, + .hal_reo1_ring_msi1_base_lsb = 0x00000234, + .hal_reo1_ring_msi1_base_msb = 0x00000238, + .hal_reo1_ring_msi1_data = 0x0000023c, + .hal_reo2_ring_base_lsb = 0x00000244, + .hal_reo1_aging_thresh_ix_0 = 0x00000564, + .hal_reo1_aging_thresh_ix_1 = 0x00000568, + .hal_reo1_aging_thresh_ix_2 = 0x0000056c, + .hal_reo1_aging_thresh_ix_3 = 0x00000570, + + /* REO2SW(x) R2 ring pointers (head/tail) address */ + .hal_reo1_ring_hp = 0x00003028, + .hal_reo1_ring_tp = 0x0000302c, + .hal_reo2_ring_hp = 0x00003030, + + /* REO2TCL R0 ring configuration address */ + .hal_reo_tcl_ring_base_lsb = 0x000003fc, + .hal_reo_tcl_ring_hp = 0x00003058, + + /* REO CMD ring address */ + .hal_reo_cmd_ring_base_lsb = 0x000000e4, + .hal_reo_cmd_ring_hp = 0x00003010, + + /* REO status address */ + .hal_reo_status_ring_base_lsb = 0x00000504, + .hal_reo_status_hp = 0x00003070, + + /* SW2REO ring address */ + .hal_sw2reo_ring_base_lsb = 0x0000013c, + .hal_sw2reo_ring_hp = 0x00003018, + + /* WCSS relative address */ + .hal_seq_wcss_umac_ce0_src_reg = 0x01b80000, + .hal_seq_wcss_umac_ce0_dst_reg = 0x01b81000, + .hal_seq_wcss_umac_ce1_src_reg = 0x01b82000, + .hal_seq_wcss_umac_ce1_dst_reg = 0x01b83000, + + /* WBM Idle address */ + .hal_wbm_idle_link_ring_base_lsb = 0x00000874, + .hal_wbm_idle_link_ring_misc = 0x00000884, + + /* SW2WBM release address */ + .hal_wbm_release_ring_base_lsb = 0x000001ec, + + /* WBM2SW release address */ + .hal_wbm0_release_ring_base_lsb = 0x00000924, + .hal_wbm1_release_ring_base_lsb = 0x0000097c, + + /* PCIe base address */ + .pcie_qserdes_sysclk_en_sel = 0x0, + .pcie_pcs_osc_dtct_config_base = 0x0, + + /* Shadow register area */ + .hal_shadow_base_addr = 0x00000504, }; const struct ath11k_hw_hal_params ath11k_hw_hal_params_ipq8074 = { diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h index ab258a0..cb48d52 100644 --- a/drivers/net/wireless/ath/ath11k/hw.h +++ b/drivers/net/wireless/ath/ath11k/hw.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: BSD-3-Clause-Clear */ /* * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved. */ #ifndef ATH11K_HW_H @@ -240,6 +241,7 @@ extern const struct ath11k_hw_ops ipq6018_ops; extern const struct ath11k_hw_ops qca6390_ops; extern const struct ath11k_hw_ops qcn9074_ops; extern const struct ath11k_hw_ops wcn6855_ops; +extern const struct ath11k_hw_ops wcn6750_ops; extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_ipq8074; extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qca6390; @@ -336,6 +338,12 @@ struct ath11k_hw_regs { u32 hal_reo_status_ring_base_lsb; u32 hal_reo_status_hp; + u32 hal_reo_cmd_ring_base_lsb; + u32 hal_reo_cmd_ring_hp; + + u32 hal_sw2reo_ring_base_lsb; + u32 hal_sw2reo_ring_hp; + u32 hal_seq_wcss_umac_ce0_src_reg; u32 hal_seq_wcss_umac_ce0_dst_reg; u32 hal_seq_wcss_umac_ce1_src_reg; @@ -351,11 +359,14 @@ struct ath11k_hw_regs { u32 pcie_qserdes_sysclk_en_sel; u32 pcie_pcs_osc_dtct_config_base; + + u32 hal_shadow_base_addr; }; extern const struct ath11k_hw_regs ipq8074_regs; extern const struct ath11k_hw_regs qca6390_regs; extern const struct ath11k_hw_regs qcn9074_regs; extern const struct ath11k_hw_regs wcn6855_regs; +extern const struct ath11k_hw_regs wcn6750_regs; #endif -- 2.7.4 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2022-01-16 12:48 UTC|newest] Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-01-16 12:46 [PATCH v2 00/19] add support for WCN6750 Manikanta Pubbisetty 2022-01-16 12:46 ` Manikanta Pubbisetty 2022-01-16 12:46 ` [PATCH v2 01/19] ath11k: PCI changes to support WCN6750 Manikanta Pubbisetty 2022-01-16 12:46 ` Manikanta Pubbisetty 2022-01-16 12:46 ` [PATCH v2 02/19] ath11k: Refactor PCI code to support hybrid bus devices Manikanta Pubbisetty 2022-01-16 12:46 ` Manikanta Pubbisetty 2022-01-28 10:16 ` Kalle Valo 2022-01-28 10:16 ` Kalle Valo 2022-02-25 5:50 ` Manikanta Pubbisetty 2022-02-25 5:50 ` Manikanta Pubbisetty 2022-03-08 6:00 ` Manikanta Pubbisetty 2022-03-08 6:00 ` Manikanta Pubbisetty 2022-01-28 12:13 ` Kalle Valo 2022-01-28 12:13 ` Kalle Valo 2022-02-21 8:04 ` Manikanta Pubbisetty 2022-02-21 8:04 ` Manikanta Pubbisetty 2022-02-21 9:19 ` Kalle Valo 2022-02-21 9:19 ` Kalle Valo 2022-02-21 10:19 ` Manikanta Pubbisetty 2022-02-21 10:19 ` Manikanta Pubbisetty 2022-01-16 12:46 ` [PATCH v2 03/19] ath11k: Choose MSI config based on HW revision Manikanta Pubbisetty 2022-01-16 12:46 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 04/19] ath11k: Refactor MSI logic Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 05/19] ath11k: Remove core PCI references from PCI common code Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-28 10:20 ` Kalle Valo 2022-01-28 10:20 ` Kalle Valo 2022-01-28 10:37 ` Kalle Valo 2022-01-28 10:37 ` Kalle Valo 2022-02-21 7:07 ` Manikanta Pubbisetty 2022-02-21 7:07 ` Manikanta Pubbisetty 2022-02-21 9:21 ` Kalle Valo 2022-02-21 9:21 ` Kalle Valo 2022-02-21 6:55 ` Manikanta Pubbisetty 2022-02-21 6:55 ` Manikanta Pubbisetty 2022-02-21 9:17 ` Kalle Valo 2022-02-21 9:17 ` Kalle Valo 2022-02-21 10:08 ` Manikanta Pubbisetty 2022-02-21 10:08 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 06/19] ath11k: Add HW params for WCN6750 Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 07/19] ath11k: Add bus " Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 08/19] ath11k: Add register access logic " Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 09/19] ath11k: Fetch device information via QMI " Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 10/19] ath11k: Add QMI changes " Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-28 10:50 ` Kalle Valo 2022-01-28 10:50 ` Kalle Valo 2022-02-21 8:02 ` Manikanta Pubbisetty 2022-02-21 8:02 ` Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty [this message] 2022-01-16 12:47 ` [PATCH v2 11/19] ath11k: HAL changes to support WCN6750 Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 12/19] ath11k: Datapath " Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-04-27 5:32 ` Kalle Valo 2022-04-27 5:32 ` Kalle Valo 2022-04-27 5:37 ` Manikanta Pubbisetty 2022-04-27 5:37 ` Manikanta Pubbisetty 2022-04-27 5:48 ` Kalle Valo 2022-04-27 5:48 ` Kalle Valo 2022-04-27 5:56 ` Manikanta Pubbisetty 2022-04-27 5:56 ` Manikanta Pubbisetty 2022-04-29 8:56 ` Kalle Valo 2022-04-29 8:56 ` Kalle Valo 2022-01-16 12:47 ` [PATCH v2 13/19] ath11k: Fix RX de-fragmentation issue on WCN6750 Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 14/19] ath11k: Do not put HW in DBS mode for WCN6750 Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 15/19] ath11k: WMI changes to support WCN6750 Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 16/19] ath11k: Update WBM idle ring HP after FW mode on Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 17/19] ath11k: Add support for WCN6750 device Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 18/19] ath11k: Add support for targets without trustzone Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-28 10:42 ` Kalle Valo 2022-01-28 10:42 ` Kalle Valo 2022-02-21 8:00 ` Manikanta Pubbisetty 2022-02-21 8:00 ` Manikanta Pubbisetty 2022-01-16 12:47 ` [PATCH v2 19/19] dt: bindings: net: add bindings of WCN6750 for ath11k Manikanta Pubbisetty 2022-01-16 12:47 ` Manikanta Pubbisetty 2022-01-28 10:39 ` Kalle Valo 2022-01-28 10:39 ` Kalle Valo 2022-02-21 7:08 ` Manikanta Pubbisetty 2022-02-21 7:08 ` Manikanta Pubbisetty 2022-02-07 22:13 ` Rob Herring 2022-02-07 22:13 ` Rob Herring 2022-02-25 11:34 ` Manikanta Pubbisetty 2022-02-25 11:34 ` Manikanta Pubbisetty 2022-01-28 10:07 ` [PATCH v2 00/19] add support for WCN6750 Kalle Valo 2022-01-28 10:07 ` Kalle Valo 2022-02-21 6:29 ` Manikanta Pubbisetty 2022-02-21 6:29 ` Manikanta Pubbisetty
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1642337235-8618-12-git-send-email-quic_mpubbise@quicinc.com \ --to=quic_mpubbise@quicinc.com \ --cc=ath11k@lists.infradead.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.