* [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
@ 2014-10-24 12:03 Laurent Pinchart
2014-10-24 12:36 ` Sergei Shtylyov
` (6 more replies)
0 siblings, 7 replies; 8+ messages in thread
From: Laurent Pinchart @ 2014-10-24 12:03 UTC (permalink / raw)
To: linux-sh
Specify the DU output topology, enable the DU device and configure the
related pins.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 9e1b859190ca..64a5d634edc1 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -69,6 +69,76 @@
gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
};
};
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ vga_enc_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ vga_enc_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&vga_enc_out>;
+ };
+ };
+ };
+
+ lvds-enc {
+ compatible = "thine,thc63lvdm83d";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ port@0 {
+ lvds_enc_in: endpoint {
+ remote-endpoint = <&du_out_rgb1>;
+ };
+ };
+ port@1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&vga_enc_in>;
+ };
+ };
+ port@1 {
+ endpoint {
+ remote-endpoint = <&lvds_enc_in>;
+ };
+ };
+ };
};
&irqpin0 {
@@ -84,6 +154,17 @@
};
&pfc {
+ du_pins: du {
+ du0 {
+ renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+ renesas,function = "du0";
+ };
+ du1 {
+ renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+ renesas,function = "du1";
+ };
+ };
+
lan0_pins: lan0 {
intc {
renesas,groups = "intc_irq1_b";
--
2.0.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
@ 2014-10-24 12:36 ` Sergei Shtylyov
2014-10-26 12:49 ` Laurent Pinchart
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Sergei Shtylyov @ 2014-10-24 12:36 UTC (permalink / raw)
To: linux-sh
Hello.
On 10/24/2014 4:03 PM, Laurent Pinchart wrote:
> Specify the DU output topology, enable the DU device and configure the
> related pins.
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
> arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
> index 9e1b859190ca..64a5d634edc1 100644
> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
> @@ -69,6 +69,76 @@
> gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> + vga-encoder {
> + compatible = "adi,adv7123";
[...]
> + lvds-enc {
Using "lvds-encoder" would have been more consistent.
> + compatible = "thine,thc63lvdm83d";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + port@0 {
Hm, I don't see the "reg" prop, where is it?
> + lvds_enc_in: endpoint {
> + remote-endpoint = <&du_out_rgb1>;
> + };
> + };
> + port@1 {
> + lvds_connector: endpoint {
> + };
> + };
> + };
> + };
> +};
[...]
WBR, Sergei
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
2014-10-24 12:36 ` Sergei Shtylyov
@ 2014-10-26 12:49 ` Laurent Pinchart
2014-10-26 13:04 ` Sergei Shtylyov
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Laurent Pinchart @ 2014-10-26 12:49 UTC (permalink / raw)
To: linux-sh
Hi Sergei,
Thank you for the review.
On Friday 24 October 2014 16:36:38 Sergei Shtylyov wrote:
> On 10/24/2014 4:03 PM, Laurent Pinchart wrote:
> > Specify the DU output topology, enable the DU device and configure the
> > related pins.
> >
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> >
> > arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++
> > 1 file changed, 81 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts
> > b/arch/arm/boot/dts/r8a7779-marzen.dts index 9e1b859190ca..64a5d634edc1
> > 100644
> > --- a/arch/arm/boot/dts/r8a7779-marzen.dts
> > +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
> > @@ -69,6 +69,76 @@
> > gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
> > };
> > };
> > +
> > + vga-encoder {
> > + compatible = "adi,adv7123";
>
> [...]
>
> > + lvds-enc {
>
> Using "lvds-encoder" would have been more consistent.
I'll fix that.
> > + compatible = "thine,thc63lvdm83d";
> > +
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ports {
> > + port@0 {
>
> Hm, I don't see the "reg" prop, where is it?
In arch/arm/boot/dts/r8a7779.dtsi.
> > + lvds_enc_in: endpoint {
> > + remote-endpoint = <&du_out_rgb1>;
> > + };
> > + };
> > + port@1 {
> > + lvds_connector: endpoint {
> > + };
> > + };
> > + };
> > + };
> > +};
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
2014-10-24 12:36 ` Sergei Shtylyov
2014-10-26 12:49 ` Laurent Pinchart
@ 2014-10-26 13:04 ` Sergei Shtylyov
2014-10-26 13:16 ` Laurent Pinchart
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Sergei Shtylyov @ 2014-10-26 13:04 UTC (permalink / raw)
To: linux-sh
Hello.
On 10/26/2014 3:49 PM, Laurent Pinchart wrote:
>>> Specify the DU output topology, enable the DU device and configure the
>>> related pins.
>>> Signed-off-by: Laurent Pinchart
>>> <laurent.pinchart+renesas@ideasonboard.com>
>>> ---
>>> arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++
>>> 1 file changed, 81 insertions(+)
>>> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts
>>> b/arch/arm/boot/dts/r8a7779-marzen.dts index 9e1b859190ca..64a5d634edc1
>>> 100644
>>> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
>>> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
>>> @@ -69,6 +69,76 @@
>>> gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
>>> };
>>> };
>>> +
>>> + vga-encoder {
>>> + compatible = "adi,adv7123";
>> [...]
>>> + lvds-enc {
>> Using "lvds-encoder" would have been more consistent.
> I'll fix that.
>>> + compatible = "thine,thc63lvdm83d";
>>> +
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + ports {
>>> + port@0 {
>> Hm, I don't see the "reg" prop, where is it?
> In arch/arm/boot/dts/r8a7779.dtsi.
Hm, you're describing a board specific device, how it would get into the
SoC specific device tree?
WBR, Sergei
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
` (2 preceding siblings ...)
2014-10-26 13:04 ` Sergei Shtylyov
@ 2014-10-26 13:16 ` Laurent Pinchart
2014-10-27 1:23 ` Simon Horman
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Laurent Pinchart @ 2014-10-26 13:16 UTC (permalink / raw)
To: linux-sh
Hi Sergei,
On Sunday 26 October 2014 16:04:45 Sergei Shtylyov wrote:
> On 10/26/2014 3:49 PM, Laurent Pinchart wrote:
> >>> Specify the DU output topology, enable the DU device and configure the
> >>> related pins.
> >>>
> >>> Signed-off-by: Laurent Pinchart
> >>> <laurent.pinchart+renesas@ideasonboard.com>
> >>> ---
> >>>
> >>> arch/arm/boot/dts/r8a7779-marzen.dts | 81 +++++++++++++++++++++++++++
> >>> 1 file changed, 81 insertions(+)
> >>>
> >>> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts
> >>> b/arch/arm/boot/dts/r8a7779-marzen.dts index 9e1b859190ca..64a5d634edc1
> >>> 100644
> >>> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
> >>> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
> >>> @@ -69,6 +69,76 @@
> >>> gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
> >>> };
> >>> };
> >>> +
> >>> + vga-encoder {
> >>> + compatible = "adi,adv7123";
> >>
> >> [...]
> >>
> >>> + lvds-enc {
> >>
> >> Using "lvds-encoder" would have been more consistent.
> >
> > I'll fix that.
> >
> >>> + compatible = "thine,thc63lvdm83d";
> >>> +
> >>> + #address-cells = <1>;
> >>> + #size-cells = <0>;
> >>> +
> >>> + ports {
> >>> + port@0 {
> >>
> >> Hm, I don't see the "reg" prop, where is it?
> >
> > In arch/arm/boot/dts/r8a7779.dtsi.
>
> Hm, you're describing a board specific device, how it would get into the SoC
> specific device tree?
Sorry, my bad, I somehow considered this was referring to the DU ports. I'll
fix the problem.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
` (3 preceding siblings ...)
2014-10-26 13:16 ` Laurent Pinchart
@ 2014-10-27 1:23 ` Simon Horman
2014-10-27 9:18 ` Geert Uytterhoeven
2014-10-27 9:27 ` Laurent Pinchart
6 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2014-10-27 1:23 UTC (permalink / raw)
To: linux-sh
On Fri, Oct 24, 2014 at 03:03:57PM +0300, Laurent Pinchart wrote:
> Specify the DU output topology, enable the DU device and configure the
> related pins.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
I have this patch queued up but I notice that it seems to introduce
the following warnings. Can this be addressed somehow?
Warning (reg_format): "reg" property in /lvds-encoder/ports/port@0 has invalid length (4 bytes) (#address-cells = 2, #size-cells = 1)
Warning (reg_format): "reg" property in /lvds-encoder/ports/port@1 has invalid length (4 bytes) (#address-cells = 2, #size-cells = 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /lvds-encoder/ports/port@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /lvds-encoder/ports/port@0
Warning (avoid_default_addr_size): Relying on default #address-cells value for /lvds-encoder/ports/port@1
Warning (avoid_default_addr_size): Relying on default #size-cells value for /lvds-encoder/ports/port@1
> ---
> arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
> index 9e1b859190ca..64a5d634edc1 100644
> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
> @@ -69,6 +69,76 @@
> gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> + vga-encoder {
> + compatible = "adi,adv7123";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + vga_enc_in: endpoint {
> + remote-endpoint = <&du_out_rgb0>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + vga_enc_out: endpoint {
> + remote-endpoint = <&vga_in>;
> + };
> + };
> + };
> + };
> +
> + vga {
> + compatible = "vga-connector";
> +
> + port {
> + vga_in: endpoint {
> + remote-endpoint = <&vga_enc_out>;
> + };
> + };
> + };
> +
> + lvds-enc {
> + compatible = "thine,thc63lvdm83d";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + port@0 {
> + lvds_enc_in: endpoint {
> + remote-endpoint = <&du_out_rgb1>;
> + };
> + };
> + port@1 {
> + lvds_connector: endpoint {
> + };
> + };
> + };
> + };
> +};
> +
> +&du {
> + pinctrl-0 = <&du_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +
> + ports {
> + port@0 {
> + endpoint {
> + remote-endpoint = <&vga_enc_in>;
> + };
> + };
> + port@1 {
> + endpoint {
> + remote-endpoint = <&lvds_enc_in>;
> + };
> + };
> + };
> };
>
> &irqpin0 {
> @@ -84,6 +154,17 @@
> };
>
> &pfc {
> + du_pins: du {
> + du0 {
> + renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
> + renesas,function = "du0";
> + };
> + du1 {
> + renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
> + renesas,function = "du1";
> + };
> + };
> +
> lan0_pins: lan0 {
> intc {
> renesas,groups = "intc_irq1_b";
> --
> 2.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
` (4 preceding siblings ...)
2014-10-27 1:23 ` Simon Horman
@ 2014-10-27 9:18 ` Geert Uytterhoeven
2014-10-27 9:27 ` Laurent Pinchart
6 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2014-10-27 9:18 UTC (permalink / raw)
To: linux-sh
On Mon, Oct 27, 2014 at 2:23 AM, Simon Horman <horms@verge.net.au> wrote:
> I have this patch queued up but I notice that it seems to introduce
> the following warnings. Can this be addressed somehow?
>
> Warning (reg_format): "reg" property in /lvds-encoder/ports/port@0 has invalid length (4 bytes) (#address-cells = 2, #size-cells = 1)
> Warning (reg_format): "reg" property in /lvds-encoder/ports/port@1 has invalid length (4 bytes) (#address-cells = 2, #size-cells = 1)
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /lvds-encoder/ports/port@0
> Warning (avoid_default_addr_size): Relying on default #size-cells value for /lvds-encoder/ports/port@0
> Warning (avoid_default_addr_size): Relying on default #address-cells value for /lvds-encoder/ports/port@1
> Warning (avoid_default_addr_size): Relying on default #size-cells value for /lvds-encoder/ports/port@1
>> ---
>> arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 81 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
>> index 9e1b859190ca..64a5d634edc1 100644
>> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
>> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
>> @@ -69,6 +69,76 @@
>> gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
>> };
>> };
>> +
>> + vga-encoder {
>> + compatible = "adi,adv7123";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> + vga_enc_in: endpoint {
>> + remote-endpoint = <&du_out_rgb0>;
>> + };
>> + };
>> + port@1 {
>> + reg = <1>;
>> + vga_enc_out: endpoint {
>> + remote-endpoint = <&vga_in>;
>> + };
>> + };
>> + };
>> + };
>> +
>> + vga {
>> + compatible = "vga-connector";
>> +
>> + port {
>> + vga_in: endpoint {
>> + remote-endpoint = <&vga_enc_out>;
>> + };
>> + };
>> + };
>> +
>> + lvds-enc {
>> + compatible = "thine,thc63lvdm83d";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
I think the two properties above should be moved to the ports node below.
>> +
>> + ports {
---> HERE.
Yes, this can be a real PITA. I had to sprinkle lots of #address-cells = <1>
and #size-cells = <0> to the hierarchical PM domain nodes, too.
>> + port@0 {
>> + lvds_enc_in: endpoint {
>> + remote-endpoint = <&du_out_rgb1>;
>> + };
>> + };
>> + port@1 {
>> + lvds_connector: endpoint {
>> + };
>> + };
>> + };
>> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
` (5 preceding siblings ...)
2014-10-27 9:18 ` Geert Uytterhoeven
@ 2014-10-27 9:27 ` Laurent Pinchart
6 siblings, 0 replies; 8+ messages in thread
From: Laurent Pinchart @ 2014-10-27 9:27 UTC (permalink / raw)
To: linux-sh
On Monday 27 October 2014 10:18:16 Geert Uytterhoeven wrote:
> On Mon, Oct 27, 2014 at 2:23 AM, Simon Horman <horms@verge.net.au> wrote:
> > I have this patch queued up but I notice that it seems to introduce
> > the following warnings. Can this be addressed somehow?
> >
> > Warning (reg_format): "reg" property in /lvds-encoder/ports/port@0 has
> > invalid length (4 bytes) (#address-cells = 2, #size-cells = 1) Warning
> > (reg_format): "reg" property in /lvds-encoder/ports/port@1 has invalid
> > length (4 bytes) (#address-cells = 2, #size-cells = 1) Warning
> > (avoid_default_addr_size): Relying on default #address-cells value for
> > /lvds-encoder/ports/port@0 Warning (avoid_default_addr_size): Relying on
> > default #size-cells value for /lvds-encoder/ports/port@0 Warning
> > (avoid_default_addr_size): Relying on default #address-cells value for
> > /lvds-encoder/ports/port@1 Warning (avoid_default_addr_size): Relying on
> > default #size-cells value for /lvds-encoder/ports/port@1>
> >> ---
> >>
> >> arch/arm/boot/dts/r8a7779-marzen.dts | 81 ++++++++++++++++++++++++++++++
> >> 1 file changed, 81 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts
> >> b/arch/arm/boot/dts/r8a7779-marzen.dts index 9e1b859190ca..64a5d634edc1
> >> 100644
> >> --- a/arch/arm/boot/dts/r8a7779-marzen.dts
> >> +++ b/arch/arm/boot/dts/r8a7779-marzen.dts
> >> @@ -69,6 +69,76 @@
> >> gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
> >> };
> >> };
> >> +
> >> + vga-encoder {
> >> + compatible = "adi,adv7123";
> >> +
> >> + ports {
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + port@0 {
> >> + reg = <0>;
> >> + vga_enc_in: endpoint {
> >> + remote-endpoint = <&du_out_rgb0>;
> >> + };
> >> + };
> >> + port@1 {
> >> + reg = <1>;
> >> + vga_enc_out: endpoint {
> >> + remote-endpoint = <&vga_in>;
> >> + };
> >> + };
> >> + };
> >> + };
> >> +
> >> + vga {
> >> + compatible = "vga-connector";
> >> +
> >> + port {
> >> + vga_in: endpoint {
> >> + remote-endpoint = <&vga_enc_out>;
> >> + };
> >> + };
> >> + };
> >> +
> >> + lvds-enc {
> >> + compatible = "thine,thc63lvdm83d";
> >> +
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
>
> I think the two properties above should be moved to the ports node below.
>
> >> +
> >> + ports {
>
> ---> HERE.
That's correct. Sorry for the oversight. I've submitted a patch to fix this.
> Yes, this can be a real PITA. I had to sprinkle lots of #address-cells = <1>
> and #size-cells = <0> to the hierarchical PM domain nodes, too.
I wonder if there's a reason why those properties are not inherited.
> >> + port@0 {
> >> + lvds_enc_in: endpoint {
> >> + remote-endpoint = <&du_out_rgb1>;
> >> + };
> >> + };
> >> + port@1 {
> >> + lvds_connector: endpoint {
> >> + };
> >> + };
> >> + };
> >> + };
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-10-27 9:27 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-24 12:03 [PATCH v4 5/9] ARM: shmobile: marzen: Enable DU device in DT Laurent Pinchart
2014-10-24 12:36 ` Sergei Shtylyov
2014-10-26 12:49 ` Laurent Pinchart
2014-10-26 13:04 ` Sergei Shtylyov
2014-10-26 13:16 ` Laurent Pinchart
2014-10-27 1:23 ` Simon Horman
2014-10-27 9:18 ` Geert Uytterhoeven
2014-10-27 9:27 ` Laurent Pinchart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.