[PATCH v5 0/1] Add property in dwmac-stm32 documentation

[PATCH v5 0/1] Add property in dwmac-stm32 documentation

[Christophe Roullier]

Introduce property in dwmac-stm32 documentation

 - st,ext-phyclk: is present since 2020 in driver so need to explain
   it and avoid dtbs check issue : views/kernel/upstream/net-next/arch/arm/boot/dts/st/stm32mp157c-dk2.dtb: 
ethernet@5800a000: Unevaluated properties are not allowed 
('st,ext-phyclk' was unexpected)
   Furthermore this property will be use in upstream of MP13 dwmac glue. (next step)

V2: - Drop deprecated: property for st,eth-clk-sel and st,eth-ref-clk-sel
V3: - Rework commit message
V4: - Fix syntax issue in commit message
V5: - Remark from Andrew Lunn (remove documentation of PHY regulator, it will come in next step (with 
      implementation))

Christophe Roullier (1):
  dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

-- 
2.25.1

[PATCH v5 0/1] Add property in dwmac-stm32 documentation

[Christophe Roullier]

Introduce property in dwmac-stm32 documentation

 - st,ext-phyclk: is present since 2020 in driver so need to explain
   it and avoid dtbs check issue : views/kernel/upstream/net-next/arch/arm/boot/dts/st/stm32mp157c-dk2.dtb: 
ethernet@5800a000: Unevaluated properties are not allowed 
('st,ext-phyclk' was unexpected)
   Furthermore this property will be use in upstream of MP13 dwmac glue. (next step)

V2: - Drop deprecated: property for st,eth-clk-sel and st,eth-ref-clk-sel
V3: - Rework commit message
V4: - Fix syntax issue in commit message
V5: - Remark from Andrew Lunn (remove documentation of PHY regulator, it will come in next step (with 
      implementation))

Christophe Roullier (1):
  dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Christophe Roullier]

The Linux kernel dwmac-stm32 driver currently supports three DT
properties used to configure whether PHY clock are generated by
the MAC or supplied to the MAC from the PHY.

Originally there were two properties, st,eth-clk-sel and
st,eth-ref-clk-sel, each used to configure MAC clocking in
different bus mode and for different MAC clock frequency.
Since it is possible to determine the MAC 'eth-ck' clock
frequency from the clock subsystem and PHY bus mode from
the 'phy-mode' property, two disparate DT properties are
no longer required to configure MAC clocking.

Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
introduced a third, unified, property st,ext-phyclk. This property
covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
properties, as well as a new use case for 25 MHz clock generated
by the MAC.

The third property st,ext-phyclk is so far undocumented,
document it.

Below table summarizes the clock requirement and clock sources for
supported PHY interface modes.
 __________________________________________________________________________
|PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
|         |        |      25MHz    |        50MHz       |                  |

---------------------------------------------------------------------------
|  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
|         |        | st,ext-phyclk |                    |                  |

---------------------------------------------------------------------------
|  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
|         |        | st,ext-phyclk |                    |                  |

---------------------------------------------------------------------------
| RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
|         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
|         |        |               |                    | st,ext-phyclk    |

---------------------------------------------------------------------------
| RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
|         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
|         |        |               | or st,ext-phyclk   |                  |

---------------------------------------------------------------------------

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7dc..b35eae80ed6ac 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -82,6 +82,13 @@ properties:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the glue register, and the offset of the control register
 
+st,ext-phyclk:
+    description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select
+      RCC clock instead of ETH_CLK125.
+    type: boolean
+
   st,eth-clk-sel:
     description:
       set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
-- 
2.25.1

[PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Christophe Roullier]

The Linux kernel dwmac-stm32 driver currently supports three DT
properties used to configure whether PHY clock are generated by
the MAC or supplied to the MAC from the PHY.

Originally there were two properties, st,eth-clk-sel and
st,eth-ref-clk-sel, each used to configure MAC clocking in
different bus mode and for different MAC clock frequency.
Since it is possible to determine the MAC 'eth-ck' clock
frequency from the clock subsystem and PHY bus mode from
the 'phy-mode' property, two disparate DT properties are
no longer required to configure MAC clocking.

Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
introduced a third, unified, property st,ext-phyclk. This property
covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
properties, as well as a new use case for 25 MHz clock generated
by the MAC.

The third property st,ext-phyclk is so far undocumented,
document it.

Below table summarizes the clock requirement and clock sources for
supported PHY interface modes.
 __________________________________________________________________________
|PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
|         |        |      25MHz    |        50MHz       |                  |

---------------------------------------------------------------------------
|  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
|         |        | st,ext-phyclk |                    |                  |

---------------------------------------------------------------------------
|  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
|         |        | st,ext-phyclk |                    |                  |

---------------------------------------------------------------------------
| RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
|         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
|         |        |               |                    | st,ext-phyclk    |

---------------------------------------------------------------------------
| RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
|         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
|         |        |               | or st,ext-phyclk   |                  |

---------------------------------------------------------------------------

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
---
 Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index fc8c96b08d7dc..b35eae80ed6ac 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -82,6 +82,13 @@ properties:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the glue register, and the offset of the control register
 
+st,ext-phyclk:
+    description:
+      set this property in RMII mode when you have PHY without crystal 50MHz and want to
+      select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select
+      RCC clock instead of ETH_CLK125.
+    type: boolean
+
   st,eth-clk-sel:
     description:
       set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Marek Vasut]

On 3/28/24 3:08 PM, Christophe Roullier wrote:

[...]

> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
> |         |        |               | or st,ext-phyclk   |                  |
> 
> ---------------------------------------------------------------------------
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
>   Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index fc8c96b08d7dc..b35eae80ed6ac 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -82,6 +82,13 @@ properties:
>         Should be phandle/offset pair. The phandle to the syscon node which
>         encompases the glue register, and the offset of the control register
>   
> +st,ext-phyclk:

Don't you need two spaces in front of the 'st,' here ?

> +    description:
> +      set this property in RMII mode when you have PHY without crystal 50MHz and want to
> +      select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select
> +      RCC clock instead of ETH_CLK125.
> +    type: boolean
> +

With that fixed:

Reviewed-by: Marek Vasut <marex@denx.de>

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Marek Vasut]

On 3/28/24 3:08 PM, Christophe Roullier wrote:

[...]

> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
> |         |        |               | or st,ext-phyclk   |                  |
> 
> ---------------------------------------------------------------------------
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
>   Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> index fc8c96b08d7dc..b35eae80ed6ac 100644
> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
> @@ -82,6 +82,13 @@ properties:
>         Should be phandle/offset pair. The phandle to the syscon node which
>         encompases the glue register, and the offset of the control register
>   
> +st,ext-phyclk:

Don't you need two spaces in front of the 'st,' here ?

> +    description:
> +      set this property in RMII mode when you have PHY without crystal 50MHz and want to
> +      select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select
> +      RCC clock instead of ETH_CLK125.
> +    type: boolean
> +

With that fixed:

Reviewed-by: Marek Vasut <marex@denx.de>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Christophe ROULLIER]

On 3/28/24 15:19, Marek Vasut wrote:
> On 3/28/24 3:08 PM, Christophe Roullier wrote:
>
> [...]
>
>> | RMII    |    -   |     eth-ck    | eth-ck        |       n/a        |
>> |         |        | st,ext-phyclk | st,eth-ref-clk-sel 
>> |                  |
>> |         |        |               | or st,ext-phyclk 
>> |                  |
>>
>> --------------------------------------------------------------------------- 
>>
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
>> ---
>>   Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml 
>> b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> index fc8c96b08d7dc..b35eae80ed6ac 100644
>> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> @@ -82,6 +82,13 @@ properties:
>>         Should be phandle/offset pair. The phandle to the syscon node 
>> which
>>         encompases the glue register, and the offset of the control 
>> register
>>   +st,ext-phyclk:
>
> Don't you need two spaces in front of the 'st,' here ?
Sorry, that's right.
>
>> +    description:
>> +      set this property in RMII mode when you have PHY without 
>> crystal 50MHz and want to
>> +      select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when 
>> you want to select
>> +      RCC clock instead of ETH_CLK125.
>> +    type: boolean
>> +
>
> With that fixed:
>
> Reviewed-by: Marek Vasut <marex@denx.de>

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Christophe ROULLIER]

On 3/28/24 15:19, Marek Vasut wrote:
> On 3/28/24 3:08 PM, Christophe Roullier wrote:
>
> [...]
>
>> | RMII    |    -   |     eth-ck    | eth-ck        |       n/a        |
>> |         |        | st,ext-phyclk | st,eth-ref-clk-sel 
>> |                  |
>> |         |        |               | or st,ext-phyclk 
>> |                  |
>>
>> --------------------------------------------------------------------------- 
>>
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
>> ---
>>   Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml 
>> b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> index fc8c96b08d7dc..b35eae80ed6ac 100644
>> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> @@ -82,6 +82,13 @@ properties:
>>         Should be phandle/offset pair. The phandle to the syscon node 
>> which
>>         encompases the glue register, and the offset of the control 
>> register
>>   +st,ext-phyclk:
>
> Don't you need two spaces in front of the 'st,' here ?
Sorry, that's right.
>
>> +    description:
>> +      set this property in RMII mode when you have PHY without 
>> crystal 50MHz and want to
>> +      select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when 
>> you want to select
>> +      RCC clock instead of ETH_CLK125.
>> +    type: boolean
>> +
>
> With that fixed:
>
> Reviewed-by: Marek Vasut <marex@denx.de>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Rob Herring]

On Thu, 28 Mar 2024 15:08:03 +0100, Christophe Roullier wrote:
> The Linux kernel dwmac-stm32 driver currently supports three DT
> properties used to configure whether PHY clock are generated by
> the MAC or supplied to the MAC from the PHY.
> 
> Originally there were two properties, st,eth-clk-sel and
> st,eth-ref-clk-sel, each used to configure MAC clocking in
> different bus mode and for different MAC clock frequency.
> Since it is possible to determine the MAC 'eth-ck' clock
> frequency from the clock subsystem and PHY bus mode from
> the 'phy-mode' property, two disparate DT properties are
> no longer required to configure MAC clocking.
> 
> Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
> introduced a third, unified, property st,ext-phyclk. This property
> covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
> properties, as well as a new use case for 25 MHz clock generated
> by the MAC.
> 
> The third property st,ext-phyclk is so far undocumented,
> document it.
> 
> Below table summarizes the clock requirement and clock sources for
> supported PHY interface modes.
>  __________________________________________________________________________
> |PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
> |         |        |      25MHz    |        50MHz       |                  |
> 
> ---------------------------------------------------------------------------
> |  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> |  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> | RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
> |         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
> |         |        |               |                    | st,ext-phyclk    |
> 
> ---------------------------------------------------------------------------
> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
> |         |        |               | or st,ext-phyclk   |                  |
> 
> ---------------------------------------------------------------------------
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:86:5: [warning] wrong indentation: expected 2 but found 4 (indentation)
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:92:3: [error] syntax error: expected <block end>, but found '<block mapping start>' (syntax)

dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/net/stm32-dwmac.example.dts'
Documentation/devicetree/bindings/net/stm32-dwmac.yaml:92:3: did not find expected key
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/stm32-dwmac.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:92:3: did not find expected key
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240328140803.324141-2-christophe.roullier@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Rob Herring]

On Thu, 28 Mar 2024 15:08:03 +0100, Christophe Roullier wrote:
> The Linux kernel dwmac-stm32 driver currently supports three DT
> properties used to configure whether PHY clock are generated by
> the MAC or supplied to the MAC from the PHY.
> 
> Originally there were two properties, st,eth-clk-sel and
> st,eth-ref-clk-sel, each used to configure MAC clocking in
> different bus mode and for different MAC clock frequency.
> Since it is possible to determine the MAC 'eth-ck' clock
> frequency from the clock subsystem and PHY bus mode from
> the 'phy-mode' property, two disparate DT properties are
> no longer required to configure MAC clocking.
> 
> Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
> introduced a third, unified, property st,ext-phyclk. This property
> covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
> properties, as well as a new use case for 25 MHz clock generated
> by the MAC.
> 
> The third property st,ext-phyclk is so far undocumented,
> document it.
> 
> Below table summarizes the clock requirement and clock sources for
> supported PHY interface modes.
>  __________________________________________________________________________
> |PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
> |         |        |      25MHz    |        50MHz       |                  |
> 
> ---------------------------------------------------------------------------
> |  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> |  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> | RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
> |         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
> |         |        |               |                    | st,ext-phyclk    |
> 
> ---------------------------------------------------------------------------
> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
> |         |        |               | or st,ext-phyclk   |                  |
> 
> ---------------------------------------------------------------------------
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> ---
>  Documentation/devicetree/bindings/net/stm32-dwmac.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:86:5: [warning] wrong indentation: expected 2 but found 4 (indentation)
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:92:3: [error] syntax error: expected <block end>, but found '<block mapping start>' (syntax)

dtschema/dtc warnings/errors:
make[2]: *** Deleting file 'Documentation/devicetree/bindings/net/stm32-dwmac.example.dts'
Documentation/devicetree/bindings/net/stm32-dwmac.yaml:92:3: did not find expected key
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/stm32-dwmac.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/net/stm32-dwmac.yaml:92:3: did not find expected key
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/stm32-dwmac.yaml: ignoring, error parsing file
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240328140803.324141-2-christophe.roullier@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Krzysztof Kozlowski]

On 28/03/2024 15:08, Christophe Roullier wrote:
> The Linux kernel dwmac-stm32 driver currently supports three DT
> properties used to configure whether PHY clock are generated by
> the MAC or supplied to the MAC from the PHY.
> 
> Originally there were two properties, st,eth-clk-sel and
> st,eth-ref-clk-sel, each used to configure MAC clocking in
> different bus mode and for different MAC clock frequency.
> Since it is possible to determine the MAC 'eth-ck' clock
> frequency from the clock subsystem and PHY bus mode from
> the 'phy-mode' property, two disparate DT properties are
> no longer required to configure MAC clocking.
> 
> Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
> introduced a third, unified, property st,ext-phyclk. This property
> covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
> properties, as well as a new use case for 25 MHz clock generated
> by the MAC.
> 
> The third property st,ext-phyclk is so far undocumented,
> document it.
> 
> Below table summarizes the clock requirement and clock sources for
> supported PHY interface modes.
>  __________________________________________________________________________
> |PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
> |         |        |      25MHz    |        50MHz       |                  |
> 
> ---------------------------------------------------------------------------
> |  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> |  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> | RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
> |         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
> |         |        |               |                    | st,ext-phyclk    |
> 
> ---------------------------------------------------------------------------
> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
> |         |        |               | or st,ext-phyclk   |                  |
> 
> ---------------------------------------------------------------------------
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>

Can you please start testing patches *before* sending them?

Best regards,
Krzysztof

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Krzysztof Kozlowski]

On 28/03/2024 15:08, Christophe Roullier wrote:
> The Linux kernel dwmac-stm32 driver currently supports three DT
> properties used to configure whether PHY clock are generated by
> the MAC or supplied to the MAC from the PHY.
> 
> Originally there were two properties, st,eth-clk-sel and
> st,eth-ref-clk-sel, each used to configure MAC clocking in
> different bus mode and for different MAC clock frequency.
> Since it is possible to determine the MAC 'eth-ck' clock
> frequency from the clock subsystem and PHY bus mode from
> the 'phy-mode' property, two disparate DT properties are
> no longer required to configure MAC clocking.
> 
> Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
> introduced a third, unified, property st,ext-phyclk. This property
> covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
> properties, as well as a new use case for 25 MHz clock generated
> by the MAC.
> 
> The third property st,ext-phyclk is so far undocumented,
> document it.
> 
> Below table summarizes the clock requirement and clock sources for
> supported PHY interface modes.
>  __________________________________________________________________________
> |PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
> |         |        |      25MHz    |        50MHz       |                  |
> 
> ---------------------------------------------------------------------------
> |  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> |  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
> |         |        | st,ext-phyclk |                    |                  |
> 
> ---------------------------------------------------------------------------
> | RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
> |         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
> |         |        |               |                    | st,ext-phyclk    |
> 
> ---------------------------------------------------------------------------
> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
> |         |        |               | or st,ext-phyclk   |                  |
> 
> ---------------------------------------------------------------------------
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>

Can you please start testing patches *before* sending them?

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Christophe ROULLIER]

On 3/30/24 19:40, Krzysztof Kozlowski wrote:
> On 28/03/2024 15:08, Christophe Roullier wrote:
>> The Linux kernel dwmac-stm32 driver currently supports three DT
>> properties used to configure whether PHY clock are generated by
>> the MAC or supplied to the MAC from the PHY.
>>
>> Originally there were two properties, st,eth-clk-sel and
>> st,eth-ref-clk-sel, each used to configure MAC clocking in
>> different bus mode and for different MAC clock frequency.
>> Since it is possible to determine the MAC 'eth-ck' clock
>> frequency from the clock subsystem and PHY bus mode from
>> the 'phy-mode' property, two disparate DT properties are
>> no longer required to configure MAC clocking.
>>
>> Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
>> introduced a third, unified, property st,ext-phyclk. This property
>> covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
>> properties, as well as a new use case for 25 MHz clock generated
>> by the MAC.
>>
>> The third property st,ext-phyclk is so far undocumented,
>> document it.
>>
>> Below table summarizes the clock requirement and clock sources for
>> supported PHY interface modes.
>>   __________________________________________________________________________
>> |PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
>> |         |        |      25MHz    |        50MHz       |                  |
>>
>> ---------------------------------------------------------------------------
>> |  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
>> |         |        | st,ext-phyclk |                    |                  |
>>
>> ---------------------------------------------------------------------------
>> |  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
>> |         |        | st,ext-phyclk |                    |                  |
>>
>> ---------------------------------------------------------------------------
>> | RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
>> |         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
>> |         |        |               |                    | st,ext-phyclk    |
>>
>> ---------------------------------------------------------------------------
>> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
>> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
>> |         |        |               | or st,ext-phyclk   |                  |
>>
>> ---------------------------------------------------------------------------
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> Can you please start testing patches *before* sending them?
Yes sorry, when I removed patch with phy-supply property (1/2), I had 
conflict merge and I did not pay attention that my commit was modified :-(
>
> Best regards,
> Krzysztof
>

Re: [PATCH v5 1/1] dt-bindings: net: dwmac: Document STM32 property st,ext-phyclk

[Christophe ROULLIER]

On 3/30/24 19:40, Krzysztof Kozlowski wrote:
> On 28/03/2024 15:08, Christophe Roullier wrote:
>> The Linux kernel dwmac-stm32 driver currently supports three DT
>> properties used to configure whether PHY clock are generated by
>> the MAC or supplied to the MAC from the PHY.
>>
>> Originally there were two properties, st,eth-clk-sel and
>> st,eth-ref-clk-sel, each used to configure MAC clocking in
>> different bus mode and for different MAC clock frequency.
>> Since it is possible to determine the MAC 'eth-ck' clock
>> frequency from the clock subsystem and PHY bus mode from
>> the 'phy-mode' property, two disparate DT properties are
>> no longer required to configure MAC clocking.
>>
>> Linux kernel commit 1bb694e20839 ("net: ethernet: stmmac: simplify phy modes management for stm32")
>> introduced a third, unified, property st,ext-phyclk. This property
>> covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
>> properties, as well as a new use case for 25 MHz clock generated
>> by the MAC.
>>
>> The third property st,ext-phyclk is so far undocumented,
>> document it.
>>
>> Below table summarizes the clock requirement and clock sources for
>> supported PHY interface modes.
>>   __________________________________________________________________________
>> |PHY_MODE | Normal | PHY wo crystal|   PHY wo crystal   |No 125Mhz from PHY|
>> |         |        |      25MHz    |        50MHz       |                  |
>>
>> ---------------------------------------------------------------------------
>> |  MII    |    -   |     eth-ck    |        n/a         |       n/a        |
>> |         |        | st,ext-phyclk |                    |                  |
>>
>> ---------------------------------------------------------------------------
>> |  GMII   |    -   |     eth-ck    |        n/a         |       n/a        |
>> |         |        | st,ext-phyclk |                    |                  |
>>
>> ---------------------------------------------------------------------------
>> | RGMII   |    -   |     eth-ck    |        n/a         |      eth-ck      |
>> |         |        | st,ext-phyclk |                    | st,eth-clk-sel or|
>> |         |        |               |                    | st,ext-phyclk    |
>>
>> ---------------------------------------------------------------------------
>> | RMII    |    -   |     eth-ck    |      eth-ck        |       n/a        |
>> |         |        | st,ext-phyclk | st,eth-ref-clk-sel |                  |
>> |         |        |               | or st,ext-phyclk   |                  |
>>
>> ---------------------------------------------------------------------------
>>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
> Can you please start testing patches *before* sending them?
Yes sorry, when I removed patch with phy-supply property (1/2), I had 
conflict merge and I did not pay attention that my commit was modified :-(
>
> Best regards,
> Krzysztof
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel