* Re: 2.6.10-rc1-mm4
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
@ 2004-11-09 16:11 ` Jens Axboe
2004-11-09 19:53 ` 2.6.10-rc1-mm4 Andrew Morton
2004-11-09 16:32 ` 2.6.10-rc1-mm4 Jesse Barnes
` (6 subsequent siblings)
7 siblings, 1 reply; 47+ messages in thread
From: Jens Axboe @ 2004-11-09 16:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, Nov 09 2004, Andrew Morton wrote:
> +blk_sync_queue-updates.patch
>
> update an update to the md updates
I still don't think this is a good general export, it has very
specialized use. For example, from the description it looks like this
can be generally used on any block device and when it returns, we have
synced the queue. This simply isn't true, there are absolutely no
guarentees of that nature unless the block driver itself implements the
__make_request() functionality and has taken proper precautions to
prevent this already.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-09 16:11 ` 2.6.10-rc1-mm4 Jens Axboe
@ 2004-11-09 19:53 ` Andrew Morton
2004-11-09 21:14 ` 2.6.10-rc1-mm4 Jens Axboe
0 siblings, 1 reply; 47+ messages in thread
From: Andrew Morton @ 2004-11-09 19:53 UTC (permalink / raw)
To: Jens Axboe; +Cc: linux-kernel, Neil Brown
Jens Axboe <axboe@suse.de> wrote:
>
> On Tue, Nov 09 2004, Andrew Morton wrote:
> > +blk_sync_queue-updates.patch
> >
> > update an update to the md updates
>
> I still don't think this is a good general export, it has very
> specialized use. For example, from the description it looks like this
> can be generally used on any block device and when it returns, we have
> synced the queue. This simply isn't true, there are absolutely no
> guarentees of that nature unless the block driver itself implements the
> __make_request() functionality and has taken proper precautions to
> prevent this already.
True. So what do we do? Grit our teeth and move it into MD?
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: 2.6.10-rc1-mm4
2004-11-09 19:53 ` 2.6.10-rc1-mm4 Andrew Morton
@ 2004-11-09 21:14 ` Jens Axboe
2004-11-09 21:57 ` 2.6.10-rc1-mm4 Jens Axboe
2004-11-10 16:28 ` 2.6.10-rc1-mm4 Jens Axboe
0 siblings, 2 replies; 47+ messages in thread
From: Jens Axboe @ 2004-11-09 21:14 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Neil Brown
On Tue, Nov 09 2004, Andrew Morton wrote:
> Jens Axboe <axboe@suse.de> wrote:
> >
> > On Tue, Nov 09 2004, Andrew Morton wrote:
> > > +blk_sync_queue-updates.patch
> > >
> > > update an update to the md updates
> >
> > I still don't think this is a good general export, it has very
> > specialized use. For example, from the description it looks like this
> > can be generally used on any block device and when it returns, we have
> > synced the queue. This simply isn't true, there are absolutely no
> > guarentees of that nature unless the block driver itself implements the
> > __make_request() functionality and has taken proper precautions to
> > prevent this already.
>
> True. So what do we do? Grit our teeth and move it into MD?
That, or just comment it appropriately instead. Or, perhaps better, make
a real interface that works for both types of devices. It's even
confusing that the final queue cleanup and md can use the same
blk_sync_queue function, it's more by 'chance' than by design because
the driver queue is already in a known and shut down state. So I don't
like it at all.
The blk_freeze_queue() stuff I suggested should work, I'll try and make
a patch.
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: 2.6.10-rc1-mm4
2004-11-09 21:14 ` 2.6.10-rc1-mm4 Jens Axboe
@ 2004-11-09 21:57 ` Jens Axboe
2004-11-10 16:28 ` 2.6.10-rc1-mm4 Jens Axboe
1 sibling, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2004-11-09 21:57 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Neil Brown
On Tue, Nov 09 2004, Jens Axboe wrote:
> On Tue, Nov 09 2004, Andrew Morton wrote:
> > Jens Axboe <axboe@suse.de> wrote:
> > >
> > > On Tue, Nov 09 2004, Andrew Morton wrote:
> > > > +blk_sync_queue-updates.patch
> > > >
> > > > update an update to the md updates
> > >
> > > I still don't think this is a good general export, it has very
> > > specialized use. For example, from the description it looks like this
> > > can be generally used on any block device and when it returns, we have
> > > synced the queue. This simply isn't true, there are absolutely no
> > > guarentees of that nature unless the block driver itself implements the
> > > __make_request() functionality and has taken proper precautions to
> > > prevent this already.
> >
> > True. So what do we do? Grit our teeth and move it into MD?
>
> That, or just comment it appropriately instead. Or, perhaps better, make
> a real interface that works for both types of devices. It's even
> confusing that the final queue cleanup and md can use the same
> blk_sync_queue function, it's more by 'chance' than by design because
> the driver queue is already in a known and shut down state. So I don't
> like it at all.
>
> The blk_freeze_queue() stuff I suggested should work, I'll try and make
> a patch.
This is in the nature of what I had in mind. Just test compiled it,
haven't run a test on it yet. I know of at least one problem - the
queue_lock is not necesarily defined for md-type drivers. The drain and
undrain routines need to check for non-NULL q->queue_lock, which is a
bit ugly, but...
I'll fix that and really test it tomorrow. This is just an RFC until
then.
--- /opt/kernel/linux-2.6.10-rc1-mm4/drivers/block/ll_rw_blk.c 2004-11-09 22:48:47.578252278 +0100
+++ linux-2.6.10-rc1-mm4/drivers/block/ll_rw_blk.c 2004-11-09 22:53:55.641082927 +0100
@@ -229,6 +229,13 @@
**/
void blk_queue_make_request(request_queue_t * q, make_request_fn * mfn)
{
+ struct request_list *rl = &q->rq;
+
+ rl->count[READ] = rl->count[WRITE] = 0;
+ init_waitqueue_head(&rl->wait[READ]);
+ init_waitqueue_head(&rl->wait[WRITE]);
+ init_waitqueue_head(&rl->drain);
+
/*
* set defaults
*/
@@ -1311,6 +1318,45 @@
kblockd_schedule_work(&q->unplug_work);
}
+/*
+ * make sure plugging is idled for this queue
+ */
+static void blk_sync_queue(struct request_queue *q)
+{
+ del_timer_sync(&q->unplug_timer);
+ kblockd_flush();
+}
+
+/**
+ * blk_freeze_queue - freeze a request queue
+ * @q: The &request_queue_t in question
+ *
+ * Description:
+ * A frozen queue will have no pending unplugs left and will not have
+ * its ->make_request_fn invoked for processing of new requests before
+ * a matching call to blk_unfreeze_queue has been made.
+ **/
+void blk_freeze_queue(request_queue_t *q)
+{
+ blk_wait_queue_drained(q, 1);
+ blk_sync_queue(q);
+}
+EXPORT_SYMBOL(blk_freeze_queue);
+
+/**
+ * blk_unfreeze_queue - freeze a request queue
+ * @q: The &request_queue_t in question
+ *
+ * Description:
+ * Unfreeze the queue again and wake up anybody that might be waiting to
+ * queue IO to it.
+ **/
+void blk_unfreeze_queue(request_queue_t *q)
+{
+ blk_finish_queue_drain(q);
+}
+EXPORT_SYMBOL(blk_unfreeze_queue);
+
/**
* blk_start_queue - restart a previously stopped queue
* @q: The &request_queue_t in question
@@ -1361,25 +1407,6 @@
EXPORT_SYMBOL(blk_stop_queue);
/**
- * blk_sync_queue - cancel any pending callbacks a queue
- * @q: the queue
- *
- * Description:
- * The block layer may perform asynchronous callback activity
- * on a queue, such as calling the unplug function after a timeout.
- * A block device may call blk_sync_queue to ensure that any
- * such activity is cancelled, thus allowing it to release resources
- * the the callbacks might use.
- *
- */
-void blk_sync_queue(struct request_queue *q)
-{
- del_timer_sync(&q->unplug_timer);
- kblockd_flush();
-}
-EXPORT_SYMBOL(blk_sync_queue);
-
-/**
* blk_run_queue - run a single device queue
* @q: The queue to run
*/
@@ -1436,11 +1463,6 @@
{
struct request_list *rl = &q->rq;
- rl->count[READ] = rl->count[WRITE] = 0;
- init_waitqueue_head(&rl->wait[READ]);
- init_waitqueue_head(&rl->wait[WRITE]);
- init_waitqueue_head(&rl->drain);
-
rl->rq_pool = mempool_create(BLKDEV_MIN_RQ, mempool_alloc_slab, mempool_free_slab, request_cachep);
if (!rl->rq_pool)
@@ -1508,6 +1530,8 @@
if (!q)
return NULL;
+ blk_queue_make_request(q, __make_request);
+
if (blk_init_free_list(q))
goto out_init;
@@ -1522,7 +1546,6 @@
blk_queue_segment_boundary(q, 0xffffffff);
- blk_queue_make_request(q, __make_request);
blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
--- /opt/kernel/linux-2.6.10-rc1-mm4/include/linux/blkdev.h 2004-11-09 22:48:53.904571107 +0100
+++ linux-2.6.10-rc1-mm4/include/linux/blkdev.h 2004-11-09 22:50:00.404410930 +0100
@@ -522,9 +522,10 @@
extern int scsi_cmd_ioctl(struct file *, struct gendisk *, unsigned int, void __user *);
extern void blk_start_queue(request_queue_t *q);
extern void blk_stop_queue(request_queue_t *q);
-extern void blk_sync_queue(struct request_queue *q);
extern void __blk_stop_queue(request_queue_t *q);
extern void blk_run_queue(request_queue_t *);
+extern void blk_freeze_queue(request_queue_t *);
+extern void blk_unfreeze_queue(request_queue_t *);
extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *);
extern struct request *blk_rq_map_user(request_queue_t *, int, void __user *, unsigned int);
extern int blk_rq_unmap_user(struct request *, struct bio *, unsigned int);
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-09 21:14 ` 2.6.10-rc1-mm4 Jens Axboe
2004-11-09 21:57 ` 2.6.10-rc1-mm4 Jens Axboe
@ 2004-11-10 16:28 ` Jens Axboe
1 sibling, 0 replies; 47+ messages in thread
From: Jens Axboe @ 2004-11-10 16:28 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Neil Brown
On Tue, Nov 09 2004, Jens Axboe wrote:
> On Tue, Nov 09 2004, Andrew Morton wrote:
> > Jens Axboe <axboe@suse.de> wrote:
> > >
> > > On Tue, Nov 09 2004, Andrew Morton wrote:
> > > > +blk_sync_queue-updates.patch
> > > >
> > > > update an update to the md updates
> > >
> > > I still don't think this is a good general export, it has very
> > > specialized use. For example, from the description it looks like this
> > > can be generally used on any block device and when it returns, we have
> > > synced the queue. This simply isn't true, there are absolutely no
> > > guarentees of that nature unless the block driver itself implements the
> > > __make_request() functionality and has taken proper precautions to
> > > prevent this already.
> >
> > True. So what do we do? Grit our teeth and move it into MD?
>
> That, or just comment it appropriately instead. Or, perhaps better, make
Here's a patch to just correct the comment. The md usage is safe because
it switches ->make_request_fn before syncing the queue and on second
thought it is a bit silly to add freeze/unfreeze functionality that no
one will use right now anyways. Alternatively, we could add this
functionality to the core so the interface would be
/* callers wait for unfreeze */
blk_freeze_queue(q, FREEZE_WAIT);
or
/* callers are io errored immediately */
blk_freeze_queue(q, FREEZE_END_IO);
which would work for both. I'll keep it in mind if such a use becomes
attractive, for now I think we should just correct the comment.
--- linux-2.6.10-rc1-mm4/drivers/block/ll_rw_blk.c~ 2004-11-10 17:23:36.166564568 +0100
+++ linux-2.6.10-rc1-mm4/drivers/block/ll_rw_blk.c 2004-11-10 17:24:41.139041569 +0100
@@ -1361,7 +1361,7 @@
EXPORT_SYMBOL(blk_stop_queue);
/**
- * blk_sync_queue - cancel any pending callbacks a queue
+ * blk_sync_queue - cancel any pending callbacks on a queue
* @q: the queue
*
* Description:
@@ -1369,7 +1369,9 @@
* on a queue, such as calling the unplug function after a timeout.
* A block device may call blk_sync_queue to ensure that any
* such activity is cancelled, thus allowing it to release resources
- * the the callbacks might use.
+ * the the callbacks might use. The caller must already have made sure
+ * that its ->make_request_fn will not re-add plugging prior to calling
+ * this function.
*
*/
void blk_sync_queue(struct request_queue *q)
--
Jens Axboe
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: 2.6.10-rc1-mm4
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
2004-11-09 16:11 ` 2.6.10-rc1-mm4 Jens Axboe
@ 2004-11-09 16:32 ` Jesse Barnes
2004-11-09 16:41 ` 2.6.10-rc1-mm4 Markus Trippelsdorf
` (5 subsequent siblings)
7 siblings, 0 replies; 47+ messages in thread
From: Jesse Barnes @ 2004-11-09 16:32 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tuesday, November 09, 2004 10:49 am, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.
>6.10-rc1-mm4/
I get this build error when I enable x86 support on ia64:
CC arch/ia64/ia32/binfmt_elf32.o
In file included from arch/ia64/ia32/binfmt_elf32.c:47:
arch/ia64/ia32/../../../fs/binfmt_elf.c:721:60: macro "setup_arg_pages" passed
3 arguments, but takes just 2
In file included from arch/ia64/ia32/binfmt_elf32.c:47:
arch/ia64/ia32/../../../fs/binfmt_elf.c: In function `load_elf_binary':
arch/ia64/ia32/../../../fs/binfmt_elf.c:721: warning: assignment makes integer
from pointer without a cast
make[1]: *** [arch/ia64/ia32/binfmt_elf32.o] Error 1
make: *** [arch/ia64/ia32] Error 2
Other than that, it builds and comes up fine with sn2_defconfig.
Jesse
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
2004-11-09 16:11 ` 2.6.10-rc1-mm4 Jens Axboe
2004-11-09 16:32 ` 2.6.10-rc1-mm4 Jesse Barnes
@ 2004-11-09 16:41 ` Markus Trippelsdorf
2004-11-09 21:11 ` [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error Adrian Bunk
2004-11-09 17:02 ` 2.6.10-rc1-mm4 Stefano Rivoir
` (4 subsequent siblings)
7 siblings, 1 reply; 47+ messages in thread
From: Markus Trippelsdorf @ 2004-11-09 16:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 2004-11-09 at 07:49 -0800, Andrew Morton wrote:
> - v4l updates, fbdev updates.
It does not link here on amd64 using an build-in BT848 driver.
LD vmlinux
drivers/built-in.o(.init.text+0xba4d): In function `p_radio':
: undefined reference to `bttv_parse'
make: *** [vmlinux] Error 1
__
Markus
^ permalink raw reply [flat|nested] 47+ messages in thread* [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-09 16:41 ` 2.6.10-rc1-mm4 Markus Trippelsdorf
@ 2004-11-09 21:11 ` Adrian Bunk
2004-11-09 21:43 ` Gerd Knorr
2004-11-09 21:55 ` Markus Trippelsdorf
0 siblings, 2 replies; 47+ messages in thread
From: Adrian Bunk @ 2004-11-09 21:11 UTC (permalink / raw)
To: Markus Trippelsdorf, Gerd Knorr
Cc: Andrew Morton, linux-kernel, video4linux-list
On Tue, Nov 09, 2004 at 05:41:28PM +0100, Markus Trippelsdorf wrote:
> On Tue, 2004-11-09 at 07:49 -0800, Andrew Morton wrote:
>
> > - v4l updates, fbdev updates.
>
> It does not link here on amd64 using an build-in BT848 driver.
>
> LD vmlinux
> drivers/built-in.o(.init.text+0xba4d): In function `p_radio':
> : undefined reference to `bttv_parse'
> make: *** [vmlinux] Error 1
Thanks for this report.
This problem is not specific to amd64.
@Gerd:
This is caused by your bttv updates included in -mm.
As far as I can see, the radio parameter is already handled correctly.
Is the patch below correct?
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.10-rc1-mm4-full/drivers/media/video/bttv-driver.c.old 2004-11-09 21:57:35.000000000 +0100
+++ linux-2.6.10-rc1-mm4-full/drivers/media/video/bttv-driver.c 2004-11-09 22:04:36.000000000 +0100
@@ -127,12 +127,6 @@
MODULE_AUTHOR("Ralph Metzler & Marcus Metzler & Gerd Knorr");
MODULE_LICENSE("GPL");
-/* kernel args */
-#ifndef MODULE
-static int __init p_radio(char *str) { return bttv_parse(str,BTTV_MAX,radio); }
-__setup("bttv.radio=", p_radio);
-#endif
-
/* ----------------------------------------------------------------------- */
/* sysfs */
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-09 21:11 ` [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error Adrian Bunk
@ 2004-11-09 21:43 ` Gerd Knorr
2004-11-09 21:55 ` Markus Trippelsdorf
1 sibling, 0 replies; 47+ messages in thread
From: Gerd Knorr @ 2004-11-09 21:43 UTC (permalink / raw)
To: Adrian Bunk; +Cc: linux-kernel
> As far as I can see, the radio parameter is already handled correctly.
> Is the patch below correct?
> -/* kernel args */
> -#ifndef MODULE
> -static int __init p_radio(char *str) { return bttv_parse(str,BTTV_MAX,radio); }
> -__setup("bttv.radio=", p_radio);
> -#endif
Yes, it's already in Andrew's inbox, just forgot to delete that and
didn't notice due to modular builds ...
Gerd
--
#define printk(args...) fprintf(stderr, ## args)
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-09 21:11 ` [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error Adrian Bunk
2004-11-09 21:43 ` Gerd Knorr
@ 2004-11-09 21:55 ` Markus Trippelsdorf
2004-11-10 8:24 ` Gerd Knorr
1 sibling, 1 reply; 47+ messages in thread
From: Markus Trippelsdorf @ 2004-11-09 21:55 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Gerd Knorr, Andrew Morton, linux-kernel, video4linux-list
On Tue, 2004-11-09 at 22:11 +0100, Adrian Bunk wrote:
> On Tue, Nov 09, 2004 at 05:41:28PM +0100, Markus Trippelsdorf wrote:
> > On Tue, 2004-11-09 at 07:49 -0800, Andrew Morton wrote:
> >
> > > - v4l updates, fbdev updates.
> >
> > It does not link here on amd64 using an build-in BT848 driver.
> >
> > LD vmlinux
> > drivers/built-in.o(.init.text+0xba4d): In function `p_radio':
> > : undefined reference to `bttv_parse'
> > make: *** [vmlinux] Error 1
>
> @Gerd:
> This is caused by your bttv updates included in -mm.
>
> As far as I can see, the radio parameter is already handled correctly.
> Is the patch below correct?
Now the kernel is linked correctly.
However, on reboot I get this nasty error in my dmesg:
...
bttv0: PLL: 28636363 => 35468950 .. ok
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
kobject_register failed for <NULL> (-17)
Call Trace:[<ffffffff80208fa6>] [<ffffffff80277a9b>]
[<ffffffff80278002>]
[<ffffffff802f8930>] [<ffffffff8010b0e8>] [<ffffffff8010ea03>]
[<ffffffff8010b050>] [<ffffffff8010e9fb>]
and a little later:
warning: many lost ticks.
Your time source seems to be instable or some driver is hogging
interupts
All this goes away if I disable the BT848 driver...
__
Markus
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-09 21:55 ` Markus Trippelsdorf
@ 2004-11-10 8:24 ` Gerd Knorr
2004-11-10 8:47 ` Andrew Morton
2004-11-10 11:19 ` Markus Trippelsdorf
0 siblings, 2 replies; 47+ messages in thread
From: Gerd Knorr @ 2004-11-10 8:24 UTC (permalink / raw)
To: Markus Trippelsdorf
Cc: Adrian Bunk, Andrew Morton, linux-kernel, video4linux-list
> kobject_register failed for <NULL> (-17)
IIRC there was a bug in the driver base and a patch from Gred fixing
that floating around, maybe that one helps? If not, the please
build with KALLSYMS enabled, so this blob here ...
> Call Trace:[<ffffffff80208fa6>] [<ffffffff80277a9b>]
> [<ffffffff80278002>]
> [<ffffffff802f8930>] [<ffffffff8010b0e8>] [<ffffffff8010ea03>]
> [<ffffffff8010b050>] [<ffffffff8010e9fb>]
... will be translated into something readable.
> warning: many lost ticks.
> Your time source seems to be instable or some driver is hogging
> interupts
Hmm, bttv shouldn't generate IRQs when unused.
Anything suspious in /proc/interrupts?
Gerd
--
#define printk(args...) fprintf(stderr, ## args)
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-10 8:24 ` Gerd Knorr
@ 2004-11-10 8:47 ` Andrew Morton
2004-11-10 11:19 ` Markus Trippelsdorf
1 sibling, 0 replies; 47+ messages in thread
From: Andrew Morton @ 2004-11-10 8:47 UTC (permalink / raw)
To: Gerd Knorr; +Cc: markus, bunk, linux-kernel, video4linux-list
Gerd Knorr <kraxel@bytesex.org> wrote:
>
> > kobject_register failed for <NULL> (-17)
>
> IIRC there was a bug in the driver base and a patch from Gred fixing
> that floating around, maybe that one helps?
err, yes. Without that patch the kobject layer will scribble on memory and
all bets are off.
Try this:
--- a/lib/kobject.c 2004-11-09 12:09:33 -08:00
+++ b/lib/kobject.c 2004-11-09 12:09:33 -08:00
@@ -180,10 +180,10 @@
error = create_dir(kobj);
if (error) {
+ /* unlink does the kobject_put() for us */
unlink(kobj);
if (parent)
kobject_put(parent);
- kobject_put(kobj);
} else {
kobject_hotplug(kobj, KOBJ_ADD);
}
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-10 8:24 ` Gerd Knorr
2004-11-10 8:47 ` Andrew Morton
@ 2004-11-10 11:19 ` Markus Trippelsdorf
2004-11-18 16:58 ` Gerd Knorr
1 sibling, 1 reply; 47+ messages in thread
From: Markus Trippelsdorf @ 2004-11-10 11:19 UTC (permalink / raw)
To: Gerd Knorr; +Cc: Adrian Bunk, Andrew Morton, linux-kernel, video4linux-list
On Wed, 2004-11-10 at 09:24 +0100, Gerd Knorr wrote:
> > kobject_register failed for <NULL> (-17)
>
> IIRC there was a bug in the driver base and a patch from Gred fixing
> that floating around, maybe that one helps? If not, the please
> build with KALLSYMS enabled, so this blob here ...
>
> > Call Trace:[<ffffffff80208fa6>] [<ffffffff80277a9b>]
> > [<ffffffff80278002>]
> > [<ffffffff802f8930>] [<ffffffff8010b0e8>] [<ffffffff8010ea03>]
> > [<ffffffff8010b050>] [<ffffffff8010e9fb>]
>
> ... will be translated into something readable.
here it is:
kobject_register failed forBA€ÿÿÿÿ (-17)
Call Trace:<ffffffff80209706>{kobject_register+70}
<ffffffff802781fb>{bus_add_driver+107}
<ffffffff80278762>{driver_register+50}
<ffffffff802f9090>{i2c_add_driver+96}
<ffffffff8010b0f7>{init+167} <ffffffff8010ea13>{child_rip+8}
<ffffffff8010b050>{init+0} <ffffffff8010ea0b>{child_rip+0}
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
This happens also when the patch from Andrew is being applied.
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-10 11:19 ` Markus Trippelsdorf
@ 2004-11-18 16:58 ` Gerd Knorr
2004-11-19 11:46 ` Markus Trippelsdorf
[not found] ` <419E689A.5000704@backtobasicsmgmt.com>
0 siblings, 2 replies; 47+ messages in thread
From: Gerd Knorr @ 2004-11-18 16:58 UTC (permalink / raw)
To: Markus Trippelsdorf
Cc: Adrian Bunk, Andrew Morton, linux-kernel, video4linux-list
> kobject_register failed forBA€ÿÿÿÿ (-17)
Yet another kobject bug. It uses the varargs list twice in a illegal
way. That doesn't harm on i386 by pure luck, but blows things up on
amd64 machines. The patch below fixes it.
Enjoy,
Gerd
==============================[ cut here ]==============================
Subject: [patch] fix kobject varargs bug
Using var args list twice without calling va_start twice is illegal.
Signed-off-by: Gerd Knorr <kraxel@bytesex.org>
---
lib/kobject.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
Index: linux-2.6.10-rc2/lib/kobject.c
===================================================================
--- linux-2.6.10-rc2.orig/lib/kobject.c 2004-11-17 18:41:43.000000000 +0100
+++ linux-2.6.10-rc2/lib/kobject.c 2004-11-18 17:37:08.851041667 +0100
@@ -232,11 +232,12 @@ int kobject_set_name(struct kobject * ko
va_list args;
char * name;
- va_start(args,fmt);
/*
* First, try the static array
*/
+ va_start(args,fmt);
need = vsnprintf(kobj->name,limit,fmt,args);
+ va_end(args);
if (need < limit)
name = kobj->name;
else {
@@ -249,7 +250,9 @@ int kobject_set_name(struct kobject * ko
error = -ENOMEM;
goto Done;
}
+ va_start(args,fmt);
need = vsnprintf(name,limit,fmt,args);
+ va_end(args);
/* Still? Give up. */
if (need >= limit) {
@@ -266,7 +269,6 @@ int kobject_set_name(struct kobject * ko
/* Now, set the new name */
kobj->k_name = name;
Done:
- va_end(args);
return error;
}
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: [patch] 2.6.10-rc1-mm4: bttv-driver.c compile error
2004-11-18 16:58 ` Gerd Knorr
@ 2004-11-19 11:46 ` Markus Trippelsdorf
[not found] ` <419E689A.5000704@backtobasicsmgmt.com>
1 sibling, 0 replies; 47+ messages in thread
From: Markus Trippelsdorf @ 2004-11-19 11:46 UTC (permalink / raw)
To: Gerd Knorr; +Cc: Adrian Bunk, Andrew Morton, linux-kernel, video4linux-list
On Thu, 2004-11-18 at 17:58 +0100, Gerd Knorr wrote:
> > kobject_register failed forBA€ÿÿÿÿ (-17)
>
> Yet another kobject bug. It uses the varargs list twice in a illegal
> way. That doesn't harm on i386 by pure luck, but blows things up on
> amd64 machines. The patch below fixes it.
Thank you Gerd!
IMHO the patch should be applied to both mm- and the Linus tree.
___
Markus
^ permalink raw reply [flat|nested] 47+ messages in thread[parent not found: <419E689A.5000704@backtobasicsmgmt.com>]
* var args in kernel?
[not found] ` <419E689A.5000704@backtobasicsmgmt.com>
@ 2004-11-22 9:43 ` Gerd Knorr
2004-11-22 10:16 ` Jakub Jelinek
0 siblings, 1 reply; 47+ messages in thread
From: Gerd Knorr @ 2004-11-22 9:43 UTC (permalink / raw)
To: Kevin P. Fleming; +Cc: Linux Kernel Mailing List
On Fri, Nov 19, 2004 at 02:41:46PM -0700, Kevin P. Fleming wrote:
> Gerd Knorr wrote:
> >Yet another kobject bug. It uses the varargs list twice in a illegal
> >way. That doesn't harm on i386 by pure luck, but blows things up on
> >amd64 machines. The patch below fixes it.
>
> Is this safe? The normal glibc varargs implementation says you can't
> even call va_start on the same args list twice, you have to use va_copy
> to make a clone and then call va_start on that, _before_ you ever call
> va_start the first time.
Hmm, maybe. I'm not sure who actually implements the varargs (gcc?
Or glibc/kernel?) and whenever the above applies to the kernel as well
or not ...
Cc'ing the kernel list for comments.
Gerd
--
#define printk(args...) fprintf(stderr, ## args)
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-22 9:43 ` var args in kernel? Gerd Knorr
@ 2004-11-22 10:16 ` Jakub Jelinek
2004-11-22 10:29 ` Gerd Knorr
0 siblings, 1 reply; 47+ messages in thread
From: Jakub Jelinek @ 2004-11-22 10:16 UTC (permalink / raw)
To: Gerd Knorr; +Cc: Kevin P. Fleming, Linux Kernel Mailing List
On Mon, Nov 22, 2004 at 10:43:12AM +0100, Gerd Knorr wrote:
> On Fri, Nov 19, 2004 at 02:41:46PM -0700, Kevin P. Fleming wrote:
> > Gerd Knorr wrote:
> > >Yet another kobject bug. It uses the varargs list twice in a illegal
> > >way. That doesn't harm on i386 by pure luck, but blows things up on
> > >amd64 machines. The patch below fixes it.
> >
> > Is this safe? The normal glibc varargs implementation says you can't
> > even call va_start on the same args list twice, you have to use va_copy
> > to make a clone and then call va_start on that, _before_ you ever call
> > va_start the first time.
>
> Hmm, maybe. I'm not sure who actually implements the varargs (gcc?
> Or glibc/kernel?) and whenever the above applies to the kernel as well
> or not ...
varargs is implemented entirely by GCC (GCC owns the stdarg.h header
and implements the builtin functions that are used in the va_* macros).
You can call va_start on the same args list twice, both:
void foo (int x, ...)
{
va_list ap, ap2;
va_start (ap, x);
va_start (ap2, x);
...
va_end (ap);
va_end (ap2);
}
and
void foo (int x, ...)
{
va_list ap;
va_start (ap, x);
...
va_end (ap);
va_start (ap, x);
...
va_end (ap);
}
are ok. What you can't do is e.g.
va_list ap;
va_start (ap, x);
bar (x, ap);
bar (x, ap);
va_end (ap);
(i.e. once you pass the ap to some other function, the only thing that you
have to do with it in the caller is va_end).
Jakub
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-22 10:16 ` Jakub Jelinek
@ 2004-11-22 10:29 ` Gerd Knorr
2004-11-22 11:03 ` Jan Engelhardt
0 siblings, 1 reply; 47+ messages in thread
From: Gerd Knorr @ 2004-11-22 10:29 UTC (permalink / raw)
To: Jakub Jelinek; +Cc: Kevin P. Fleming, Linux Kernel Mailing List
> You can call va_start on the same args list twice, both:
> [ ... ]
> and
> void foo (int x, ...)
> {
> va_list ap;
> va_start (ap, x);
> ...
> va_end (ap);
> va_start (ap, x);
> ...
> va_end (ap);
> }
> are ok.
Fine, then my patch is ok, it does exactly this ;)
> What you can't do is e.g.
> va_list ap;
> va_start (ap, x);
> bar (x, ap);
> bar (x, ap);
> va_end (ap);
This is how the code looked before I fixed it.
Thanks,
Gerd
--
#define printk(args...) fprintf(stderr, ## args)
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-22 10:29 ` Gerd Knorr
@ 2004-11-22 11:03 ` Jan Engelhardt
2004-11-22 11:33 ` Jakub Jelinek
0 siblings, 1 reply; 47+ messages in thread
From: Jan Engelhardt @ 2004-11-22 11:03 UTC (permalink / raw)
Cc: Linux Kernel Mailing List
>> What you can't do is e.g.
>> va_list ap;
>> va_start (ap, x);
>> bar (x, ap);
>> bar (x, ap);
>> va_end (ap);
In theory, you can't. But the way how GCC (and probably other compilers)
implement it, you can. Because "ap" is just a pointer (which fits into a
register, if I may add). As such, you can copy it, pass it multiple times, use
it multiple times, and whatever you like.
At least that's IIRC the way TCPP recommends you in their helpfile
(va_list src; ... va_list dest = src)
Jan Engelhardt
--
Gesellschaft für Wissenschaftliche Datenverarbeitung
Am Fassberg, 37077 Göttingen, www.gwdg.de
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: var args in kernel?
2004-11-22 11:03 ` Jan Engelhardt
@ 2004-11-22 11:33 ` Jakub Jelinek
2004-11-22 11:39 ` Jan Engelhardt
2004-11-22 21:42 ` Bill Davidsen
0 siblings, 2 replies; 47+ messages in thread
From: Jakub Jelinek @ 2004-11-22 11:33 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: linux-kernel
On Mon, Nov 22, 2004 at 12:03:56PM +0100, Jan Engelhardt wrote:
> >> What you can't do is e.g.
> >> va_list ap;
> >> va_start (ap, x);
> >> bar (x, ap);
> >> bar (x, ap);
> >> va_end (ap);
>
> In theory, you can't. But the way how GCC (and probably other compilers)
> implement it, you can. Because "ap" is just a pointer (which fits into a
> register, if I may add). As such, you can copy it, pass it multiple times, use
> it multiple times, and whatever you like.
That's exactly the wrong assumption.
On some Linux architectures you can, on others you can't.
Architectures where va_list is a char or void pointer include e.g.:
i386, sparc*, ppc64, ia64
Architectures where va_list is something different, usually struct { ... } va_list[1];
or something similar:
x86_64, ppc32, alpha, s390, s390x
In the latter case, you obviously can't do va_list dest = src and
if you do bar (x, ap); the content of the struct pointed by ap is changed
after the call, therefore you can't use it for other routines
(as it depends on where exactly the called function stopped with va_arg).
Jakub
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-22 11:33 ` Jakub Jelinek
@ 2004-11-22 11:39 ` Jan Engelhardt
2004-11-22 12:41 ` Andreas Schwab
2004-11-22 21:42 ` Bill Davidsen
1 sibling, 1 reply; 47+ messages in thread
From: Jan Engelhardt @ 2004-11-22 11:39 UTC (permalink / raw)
To: Jakub Jelinek; +Cc: linux-kernel
>> In theory, you can't. But the way how GCC (and probably other compilers)
>> implement it, you can. Because "ap" is just a pointer (which fits into a
>> register, if I may add). As such, you can copy it, pass it multiple times, use
>> it multiple times, and whatever you like.
>
>That's exactly the wrong assumption.
>On some Linux architectures you can, on others you can't.
>Architectures where va_list is a char or void pointer include e.g.:
>i386, sparc*, ppc64, ia64
>Architectures where va_list is something different, usually struct { ... } va_list[1];
>or something similar:
>x86_64, ppc32, alpha, s390, s390x
Yeah I originally had that in mind but did not write it out ;)
What would the struct look like? Because if the following was true, then you
could also use a pointer:
int my_printf(const char *fmt, struct { some ints, some char's, whatever } arg)
{
struct giveItAName *ap = &arg;
callanotherfunc(fmt, ap);
callanotherfunc(fmt, ap);
}
>In the latter case, you obviously can't do va_list dest = src and
Mmh, I could, because GCC is wise enough to copy whole structs. This is BTW
done a LOT in the kernel sources. Just compile it with -Waggreagte-return and
ye'll get a whole whopping lot of warnings from GCC. For
linux-2.[46].\d+.tar.bz2.
>if you do bar (x, ap); the content of the struct pointed by ap is changed
>after the call, therefore you can't use it for other routines
Who said the struct is changed? The compiler could use some magic to copy
above-metioned "arg" to a temporary which is only valid during my_printf() and
callees.
Who says the struct has to be changed? And even if it was about to, you could
copy it.
>(as it depends on where exactly the called function stopped with va_arg).
Don't get me wrong, I'm just asking... in a pessimistic fashion.
Jan Engelhardt
--
Gesellschaft für Wissenschaftliche Datenverarbeitung
Am Fassberg, 37077 Göttingen, www.gwdg.de
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-22 11:39 ` Jan Engelhardt
@ 2004-11-22 12:41 ` Andreas Schwab
0 siblings, 0 replies; 47+ messages in thread
From: Andreas Schwab @ 2004-11-22 12:41 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: Jakub Jelinek, linux-kernel
Jan Engelhardt <jengelh@linux01.gwdg.de> writes:
>>> In theory, you can't. But the way how GCC (and probably other compilers)
>>> implement it, you can. Because "ap" is just a pointer (which fits into a
>>> register, if I may add). As such, you can copy it, pass it multiple times, use
>>> it multiple times, and whatever you like.
>>
>>That's exactly the wrong assumption.
>>On some Linux architectures you can, on others you can't.
>>Architectures where va_list is a char or void pointer include e.g.:
>>i386, sparc*, ppc64, ia64
>>Architectures where va_list is something different, usually struct { ... } va_list[1];
>>or something similar:
>>x86_64, ppc32, alpha, s390, s390x
>
> Yeah I originally had that in mind but did not write it out ;)
> What would the struct look like? Because if the following was true, then you
> could also use a pointer:
You left out an important detail:
> int my_printf(const char *fmt, struct { some ints, some char's, whatever } arg)
int my_printf(const char *fmt, struct { some ints, some char's, whatever } arg[1])
which the same as
int my_printf(const char *fmt, struct { some ints, some char's, whatever } *arg)
Andreas.
--
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: var args in kernel?
2004-11-22 11:33 ` Jakub Jelinek
2004-11-22 11:39 ` Jan Engelhardt
@ 2004-11-22 21:42 ` Bill Davidsen
2004-11-22 23:18 ` Jakub Jelinek
2004-11-22 23:43 ` Andreas Schwab
1 sibling, 2 replies; 47+ messages in thread
From: Bill Davidsen @ 2004-11-22 21:42 UTC (permalink / raw)
To: Jakub Jelinek; +Cc: Jan Engelhardt, linux-kernel
Jakub Jelinek wrote:
> On Mon, Nov 22, 2004 at 12:03:56PM +0100, Jan Engelhardt wrote:
>
>>>> What you can't do is e.g.
>>>> va_list ap;
>>>> va_start (ap, x);
>>>> bar (x, ap);
>>>> bar (x, ap);
>>>> va_end (ap);
>>
>>In theory, you can't. But the way how GCC (and probably other compilers)
>>implement it, you can. Because "ap" is just a pointer (which fits into a
>>register, if I may add). As such, you can copy it, pass it multiple times, use
>>it multiple times, and whatever you like.
>
>
> That's exactly the wrong assumption.
> On some Linux architectures you can, on others you can't.
> Architectures where va_list is a char or void pointer include e.g.:
> i386, sparc*, ppc64, ia64
> Architectures where va_list is something different, usually struct { ... } va_list[1];
> or something similar:
> x86_64, ppc32, alpha, s390, s390x
>
> In the latter case, you obviously can't do va_list dest = src and
> if you do bar (x, ap); the content of the struct pointed by ap is changed
> after the call, therefore you can't use it for other routines
> (as it depends on where exactly the called function stopped with va_arg).
Why can't you do dest=src? Assignment of struct to struct has been a
part of C since earliest times. I used it in ~1990 in code which ran on
Z80, Multics, M68k, VAX and Cray2, and it worked without any ifdefs (for
that, there were "just a few" for other issues like 8 vs. 9 bit char, etc).
--
-bill davidsen (davidsen@tmr.com)
"The secret to procrastination is to put things off until the
last possible moment - but no longer" -me
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-22 21:42 ` Bill Davidsen
@ 2004-11-22 23:18 ` Jakub Jelinek
2004-11-22 23:43 ` Andreas Schwab
1 sibling, 0 replies; 47+ messages in thread
From: Jakub Jelinek @ 2004-11-22 23:18 UTC (permalink / raw)
To: Bill Davidsen; +Cc: Jan Engelhardt, linux-kernel
On Mon, Nov 22, 2004 at 04:42:43PM -0500, Bill Davidsen wrote:
> Assignment of struct to struct has been a
> part of C since earliest times. I used it in ~1990 in code which ran on
> Z80, Multics, M68k, VAX and Cray2, and it worked without any ifdefs (for
> that, there were "just a few" for other issues like 8 vs. 9 bit char, etc).
It is not a struct on those arches, but array of structs.
Just try:
#include <stdarg.h>
void foo (int x, ...)
{
va_list ap, ap2;
va_start (ap, x);
ap2 = ap;
va_end (ap);
}
on say x86_64 or ppc32 and you'll see what I mean:
test.c:7: error: incompatible types in assignment
That's why the standard has va_copy so that you can do the
copying portably.
Jakub
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-22 21:42 ` Bill Davidsen
2004-11-22 23:18 ` Jakub Jelinek
@ 2004-11-22 23:43 ` Andreas Schwab
2004-11-23 14:05 ` Jan Engelhardt
2004-12-01 22:49 ` Bill Davidsen
1 sibling, 2 replies; 47+ messages in thread
From: Andreas Schwab @ 2004-11-22 23:43 UTC (permalink / raw)
To: Bill Davidsen; +Cc: Jakub Jelinek, Jan Engelhardt, linux-kernel
Bill Davidsen <davidsen@tmr.com> writes:
> Why can't you do dest=src? Assignment of struct to struct has been a part
> of C since earliest times.
It's not a struct, it's an array (of one element of struct type). You
can't assign arrays.
Andreas.
--
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: var args in kernel?
2004-11-22 23:43 ` Andreas Schwab
@ 2004-11-23 14:05 ` Jan Engelhardt
2004-11-23 15:07 ` Andreas Schwab
2004-12-01 22:49 ` Bill Davidsen
1 sibling, 1 reply; 47+ messages in thread
From: Jan Engelhardt @ 2004-11-23 14:05 UTC (permalink / raw)
To: Andreas Schwab; +Cc: Bill Davidsen, Jakub Jelinek, linux-kernel
>> Why can't you do dest=src? Assignment of struct to struct has been a part
>> of C since earliest times.
>
>It's not a struct, it's an array (of one element of struct type). You
>can't assign arrays.
int callme(const char *fmt, struct { ... } argp[1]) {
dest = *argp;
}
Maybe that way?
Jan Engelhardt
--
Gesellschaft für Wissenschaftliche Datenverarbeitung
Am Fassberg, 37077 Göttingen, www.gwdg.de
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-23 14:05 ` Jan Engelhardt
@ 2004-11-23 15:07 ` Andreas Schwab
2004-11-23 16:17 ` Jan Engelhardt
0 siblings, 1 reply; 47+ messages in thread
From: Andreas Schwab @ 2004-11-23 15:07 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: Bill Davidsen, Jakub Jelinek, linux-kernel
Jan Engelhardt <jengelh@linux01.gwdg.de> writes:
>>> Why can't you do dest=src? Assignment of struct to struct has been a part
>>> of C since earliest times.
>>
>>It's not a struct, it's an array (of one element of struct type). You
>>can't assign arrays.
>
> int callme(const char *fmt, struct { ... } argp[1]) {
struct { ... } dest[1];
> dest = *argp;
> }
>
> Maybe that way?
Maybe you should just try.
Andreas.
--
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-23 15:07 ` Andreas Schwab
@ 2004-11-23 16:17 ` Jan Engelhardt
2004-11-23 16:45 ` Andreas Schwab
0 siblings, 1 reply; 47+ messages in thread
From: Jan Engelhardt @ 2004-11-23 16:17 UTC (permalink / raw)
To: Andreas Schwab; +Cc: Bill Davidsen, Jakub Jelinek, linux-kernel
>>>It's not a struct, it's an array (of one element of struct type). You
>>>can't assign arrays.
>>
>> int callme(const char *fmt, struct { ... } argp[1]) {
> struct { ... } dest[1];
>> dest = *argp;
>> }
>>
>> Maybe that way?
>
>Maybe you should just try.
I did not say that 'dest' was an array too, and in fact, was not thinking of
such, but more like:
int foo(struct bar argp[1]) {
struct bar dest;
dest = *argp;
}
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: var args in kernel?
2004-11-23 16:17 ` Jan Engelhardt
@ 2004-11-23 16:45 ` Andreas Schwab
0 siblings, 0 replies; 47+ messages in thread
From: Andreas Schwab @ 2004-11-23 16:45 UTC (permalink / raw)
To: Jan Engelhardt; +Cc: linux-kernel
Jan Engelhardt <jengelh@linux01.gwdg.de> writes:
>>>>It's not a struct, it's an array (of one element of struct type). You
>>>>can't assign arrays.
>>>
>>> int callme(const char *fmt, struct { ... } argp[1]) {
>> struct { ... } dest[1];
>>> dest = *argp;
>>> }
>>>
>>> Maybe that way?
>>
>>Maybe you should just try.
>
> I did not say that 'dest' was an array too
But we are talking about va_list, which _is_ an array on some
architectures, and which this thread is all about.
Andreas.
--
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: var args in kernel?
2004-11-22 23:43 ` Andreas Schwab
2004-11-23 14:05 ` Jan Engelhardt
@ 2004-12-01 22:49 ` Bill Davidsen
2004-12-02 0:26 ` Andreas Schwab
1 sibling, 1 reply; 47+ messages in thread
From: Bill Davidsen @ 2004-12-01 22:49 UTC (permalink / raw)
To: Andreas Schwab; +Cc: Jakub Jelinek, Jan Engelhardt, linux-kernel
On Tue, 23 Nov 2004, Andreas Schwab wrote:
> Bill Davidsen <davidsen@tmr.com> writes:
>
> > Why can't you do dest=src? Assignment of struct to struct has been a part
> > of C since earliest times.
>
> It's not a struct, it's an array (of one element of struct type). You
> can't assign arrays.
I don't know what you read into my post, I said you can assign structs, I
didn't mention arrays. Other than you can assign elements of array of
struct, dest=src[index] format.
Why did you think I said array?
--
bill davidsen <davidsen@tmr.com>
CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: var args in kernel?
2004-12-01 22:49 ` Bill Davidsen
@ 2004-12-02 0:26 ` Andreas Schwab
0 siblings, 0 replies; 47+ messages in thread
From: Andreas Schwab @ 2004-12-02 0:26 UTC (permalink / raw)
To: Bill Davidsen; +Cc: Jakub Jelinek, Jan Engelhardt, linux-kernel
Bill Davidsen <davidsen@tmr.com> writes:
> Why did you think I said array?
We are talking about assignment of va_list here, which is an array on some
architectures.
Andreas.
--
Andreas Schwab, SuSE Labs, schwab@suse.de
SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany
Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5
"And now for something completely different."
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: 2.6.10-rc1-mm4
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
` (2 preceding siblings ...)
2004-11-09 16:41 ` 2.6.10-rc1-mm4 Markus Trippelsdorf
@ 2004-11-09 17:02 ` Stefano Rivoir
2004-11-09 23:18 ` 2.6.10-rc1-mm4 Dave Airlie
2004-11-09 20:30 ` 2.6.10-rc1-mm4: net/tulip/xircom_tulip_cb.c compile error Adrian Bunk
` (3 subsequent siblings)
7 siblings, 1 reply; 47+ messages in thread
From: Stefano Rivoir @ 2004-11-09 17:02 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 599 bytes --]
Alle 16:49, martedì 09 novembre 2004, Andrew Morton ha scritto:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.
>6.10-rc1-mm4/
Hi.
A glxgears causes Xorg to get immediately out; nothing very notable in the
logs, except for
Nov 9 17:57:09 nbsteu kernel: [drm:radeon_cp_init] *ERROR* radeon_cp_init
called without lock held
Nov 9 17:57:09 nbsteu kernel: [drm:drm_unlock] *ERROR* Process 4999 using
kernel context 0
in the syslog.
Note that everything works fine with 2.6.10-rc1-bk18.
Attached, lspci and .config.
Bye
--
Stefano Rivoir
[-- Attachment #2: lspci --]
[-- Type: text/plain, Size: 5605 bytes --]
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e7800000-e7ffffff
Prefetchable memory behind bridge: eff00000-febfffff
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
Flags: bus master, medium devsel, latency 0
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Flags: medium devsel
I/O ports at e800 [size=32]
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1737
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [64] Power Management version 2
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
I/O ports at b800 [size=16]
Capabilities: [58] Power Management version 2
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Asustek Computer, Inc.: Unknown device 1736
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at b400 [size=256]
I/O ports at b000 [size=128]
Capabilities: [48] Power Management version 2
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Asustek Computer, Inc.: Unknown device 1733
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a800 [size=256]
I/O ports at a400 [size=128]
Capabilities: [48] Power Management version 2
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 173a
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 1734
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
0000:00:0a.1 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 1734
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
0000:00:0a.2 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
Subsystem: Asustek Computer, Inc.: Unknown device 173b
Flags: medium devsel, IRQ 11
I/O ports at 9800 [size=128]
Capabilities: [a0] Power Management version 2
0000:00:0d.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
Subsystem: Asustek Computer, Inc.: Unknown device 173c
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
I/O ports at 9400 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1732
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d800 [size=256]
Memory at e7800000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 28794 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-mm4
# Tue Nov 9 17:39:03 2004
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_KERN_PHYS_OFFSET=1
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_THINKPAD is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-09 17:02 ` 2.6.10-rc1-mm4 Stefano Rivoir
@ 2004-11-09 23:18 ` Dave Airlie
2004-11-10 1:30 ` 2.6.10-rc1-mm4 Dave Airlie
` (2 more replies)
0 siblings, 3 replies; 47+ messages in thread
From: Dave Airlie @ 2004-11-09 23:18 UTC (permalink / raw)
To: Stefano Rivoir; +Cc: Andrew Morton, linux-kernel
>
> A glxgears causes Xorg to get immediately out; nothing very notable in the
> logs, except for
>
> Nov 9 17:57:09 nbsteu kernel: [drm:radeon_cp_init] *ERROR* radeon_cp_init
> called without lock held
> Nov 9 17:57:09 nbsteu kernel: [drm:drm_unlock] *ERROR* Process 4999 using
> kernel context 0
>
> in the syslog.
>
> Note that everything works fine with 2.6.10-rc1-bk18.
> Attached, lspci and .config.
Can you put up a dmesg as well? I think it might be something to do
with DRM core in-kernel, but AGP and card driver as a module,
I wonder should I change the Kconfig for CONFIG_DRM so we have a
CONFIG_DRM_CORE so old configs don't break silently....
Dave.
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-09 23:18 ` 2.6.10-rc1-mm4 Dave Airlie
@ 2004-11-10 1:30 ` Dave Airlie
2004-11-10 7:44 ` 2.6.10-rc1-mm4 Stefano Rivoir
2004-11-11 7:39 ` 2.6.10-rc1-mm4 Stefano Rivoir
2 siblings, 0 replies; 47+ messages in thread
From: Dave Airlie @ 2004-11-10 1:30 UTC (permalink / raw)
To: Stefano Rivoir; +Cc: Andrew Morton, linux-kernel
>
> > A glxgears causes Xorg to get immediately out; nothing very notable in the
> > logs, except for
> >
> > Nov 9 17:57:09 nbsteu kernel: [drm:radeon_cp_init] *ERROR* radeon_cp_init
> > called without lock held
> > Nov 9 17:57:09 nbsteu kernel: [drm:drm_unlock] *ERROR* Process 4999 using
> > kernel context 0
> >
> > in the syslog.
> >
> > Note that everything works fine with 2.6.10-rc1-bk18.
> > Attached, lspci and .config.
>
I've tracked it down to the Kconfig for the new DRM, I'm not sure what
to do with it, if AGP is a module then DRM needs to be a module now
not a yes.... but this probably isn't a hard dependency, i.e. it is
still legal to build DRM as a y but AGP won't be used as it is not in
the kernel.... I'm unsure how to do any sort of weak dependency in the
kernel configuration structure if it is at all possible..
Dave.
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: 2.6.10-rc1-mm4
2004-11-09 23:18 ` 2.6.10-rc1-mm4 Dave Airlie
2004-11-10 1:30 ` 2.6.10-rc1-mm4 Dave Airlie
@ 2004-11-10 7:44 ` Stefano Rivoir
2004-11-11 7:39 ` 2.6.10-rc1-mm4 Stefano Rivoir
2 siblings, 0 replies; 47+ messages in thread
From: Stefano Rivoir @ 2004-11-10 7:44 UTC (permalink / raw)
To: Dave Airlie; +Cc: Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 297 bytes --]
Alle 00:18, mercoledì 10 novembre 2004, Dave Airlie ha scritto:
> > A glxgears causes Xorg to get immediately out; nothing very notable in
> > the logs, except for
[...]
> Can you put up a dmesg as well? I think it might be something to do
Here you are.
Bye!
--
Stefano Rivoir
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 13339 bytes --]
Linux version 2.6.10-rc1-mm4 (root@nbsteu) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 Tue Nov 9 17:37:56 CET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffa000 (usable)
BIOS-e820: 000000001fffa000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131066
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126970 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6410
ACPI: RSDT (v001 ASUS L5C 0x42302e31 MSFT 0x31313031) @ 0x1fffa000
ACPI: FADT (v001 ASUS L5C 0x42302e31 MSFT 0x31313031) @ 0x1fffa0b6
ACPI: BOOT (v001 ASUS L5C 0x42302e31 MSFT 0x31313031) @ 0x1fffa030
ACPI: MADT (v001 ASUS L5C 0x42302e31 MSFT 0x31313031) @ 0x1fffa058
ACPI: DSDT (v001 ASUS L5C 0x00001000 MSFT 0x0100000e) @ 0x00000000
Built 1 zonelists
Initializing CPU#0
Kernel command line: auto BOOT_IMAGE=Linux ro root=1602
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 2667.862 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x50
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 516236k/524264k available (1537k kernel code, 7436k reserved, 723k data, 104k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5259.26 BogoMIPS (lpj=2629632)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: IRQ9 SCI: Edge set to Level Trigger.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1670, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 11 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [FN0] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:02: ioport range 0xe480-0xe4ff has been reserved
pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
pnp: 00:02: ioport range 0x480-0x48f has been reserved
pnp: 00:0f: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:0f: ioport range 0x290-0x297 has been reserved
pnp: 00:0f: ioport range 0x500-0x507 has been reserved
Simple Boot Flag at 0x3a set to 0x80
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=195.00 MHz
radeonfb: PLL min 20000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: 1400x1050 TFT
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
radeonfb: Power Management enabled for Mobility chipsets
Console: switching to colour frame buffer device 175x65
radeonfb: ATI Radeon Lf DDR SGRAM 64 MB
[drm] Initialized drm 1.0.0 20040925
ACPI: PS/2 Keyboard Controller [PS2K] at I/O 0x60, 0x64, irq 1
ACPI: PS/2 Mouse Controller [PS2M] at irq 12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: IC25N060ATMR04-0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hdc: max request size: 1024KiB
hdc: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hdc: cache flushes supported
hdc: hdc1 hdc2 hdc3 < hdc5 >
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 4.6
180 degree mounted touchpad
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> four buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 104k freed
kjournald starting. Commit interval 5 seconds
Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1
EXT3 FS on hdc2, internal journal
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: 3Com Gigabit LOM (3C940)
PrefPort:A RlmtMode:Check Link State
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 11 (level, low) -> IRQ 11
intel8x0_measure_ac97_clock: measured 49477 usecs
intel8x0: clocking to 48000
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC] (on-line)
Asus Laptop ACPI Extras version 0.29
Error calling BSTS
L5G model detected, supported
ACPI: Processor [CPU0] (supports C1 C2 C3)
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (26 C)
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9]
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
input: PC Speaker
inserting floppy driver for 2.6.10-rc1-mm4
ACPI: Floppy Controller [FDC0] at I/O 0x3f2-0x3f5, 0x3f7 irq 6 dma channel 2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e7000000-e70007ff] Max Packet=[2048]
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 5, pci mem 0xe6800000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:03.1: irq 5, pci mem 0xe6000000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
ohci_hcd 0000:00:03.2: irq 5, pci mem 0xe5800000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800030a9d55]
usb 2-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [0461:4d03] on usb-0000:00:03.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 5 (level, low) -> IRQ 5
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 5, pci mem 0xe5000000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
usb 2-1: USB disconnect, address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Linux Kernel Card Services
options: [pci] [cardbus]
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1734]
Yenta: ISA IRQ mask 0x0400, PCI irq 11
Socket status: 30000006
ACPI: PCI interrupt 0000:00:0a.1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:0a.1 [1043:1734]
usb 2-1: new low speed USB device using ohci_hcd and address 3
Yenta: ISA IRQ mask 0x0010, PCI irq 11
Socket status: 30000006
input: USB HID v1.00 Mouse [0461:4d03] on usb-0000:00:03.1-1
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN0] (on)
lp: driver loaded but no devices found
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 4956 using kernel context 0
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-09 23:18 ` 2.6.10-rc1-mm4 Dave Airlie
2004-11-10 1:30 ` 2.6.10-rc1-mm4 Dave Airlie
2004-11-10 7:44 ` 2.6.10-rc1-mm4 Stefano Rivoir
@ 2004-11-11 7:39 ` Stefano Rivoir
2 siblings, 0 replies; 47+ messages in thread
From: Stefano Rivoir @ 2004-11-11 7:39 UTC (permalink / raw)
To: Dave Airlie; +Cc: Andrew Morton, linux-kernel
Dave Airlie wrote:
>>A glxgears causes Xorg to get immediately out; nothing very notable in the
>>logs, except for
[...]
> Can you put up a dmesg as well? I think it might be something to do
> with DRM core in-kernel, but AGP and card driver as a module,
Yes, just FYI everything works fine if both options are built in-kernel
and not as modules.
Bye.
--
Stefano RIVOIR
^ permalink raw reply [flat|nested] 47+ messages in thread
* 2.6.10-rc1-mm4: net/tulip/xircom_tulip_cb.c compile error
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
` (3 preceding siblings ...)
2004-11-09 17:02 ` 2.6.10-rc1-mm4 Stefano Rivoir
@ 2004-11-09 20:30 ` Adrian Bunk
2004-11-09 21:23 ` [2.6 patch] remove stale bttv_parse prototype Adrian Bunk
` (2 subsequent siblings)
7 siblings, 0 replies; 47+ messages in thread
From: Adrian Bunk @ 2004-11-09 20:30 UTC (permalink / raw)
To: Andrew Morton, Stephen Hemminger, Jeff Garzik
Cc: linux-kernel, tulip-users, linux-net
On Tue, Nov 09, 2004 at 07:49:09AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.10-rc1-mm3:
>...
> bk-netdev.patch
>...
<-- snip -->
...
CC drivers/net/tulip/xircom_tulip_cb.o
drivers/net/tulip/xircom_tulip_cb.c: In function `__check_debug':
drivers/net/tulip/xircom_tulip_cb.c:122: error: `debug' undeclared (first use in this function)
drivers/net/tulip/xircom_tulip_cb.c:122: error: (Each undeclared identifier is reported only once
drivers/net/tulip/xircom_tulip_cb.c:122: error: for each function it appears in.)
...
make[3]: *** [drivers/net/tulip/xircom_tulip_cb.o] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 47+ messages in thread* [2.6 patch] remove stale bttv_parse prototype
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
` (4 preceding siblings ...)
2004-11-09 20:30 ` 2.6.10-rc1-mm4: net/tulip/xircom_tulip_cb.c compile error Adrian Bunk
@ 2004-11-09 21:23 ` Adrian Bunk
2004-11-10 11:40 ` 2.6.10-rc1-mm4 Fabio Coatti
2004-11-11 10:17 ` 2.6.10-rc1-mm4 Stefano Rivoir
7 siblings, 0 replies; 47+ messages in thread
From: Adrian Bunk @ 2004-11-09 21:23 UTC (permalink / raw)
To: Andrew Morton, kraxel; +Cc: linux-kernel, video4linux-list
On Tue, Nov 09, 2004 at 07:49:09AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.10-rc1-mm3:
>...
> +v4l-bttv-update.patch
>...
> v4l updates
>...
This patch removes bttv_parse but not it's prototype from bttv.h
Trivial fix:
Signed-off-by: Adrian Bunk <bunk@stusta.de>
--- linux-2.6.10-rc1-mm4-full/drivers/media/video/bttv.h.old 2004-11-09 22:09:15.000000000 +0100
+++ linux-2.6.10-rc1-mm4-full/drivers/media/video/bttv.h 2004-11-09 22:09:25.000000000 +0100
@@ -230,9 +230,6 @@
extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
extern void bttv_tda9880_setnorm(struct bttv *btv, int norm);
-/* kernel cmd line parse helper */
-extern int bttv_parse(char *str, int max, int *vals);
-
/* extra tweaks for some chipsets */
extern void bttv_check_chipset(void);
extern int bttv_handle_chipset(struct bttv *btv);
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
` (5 preceding siblings ...)
2004-11-09 21:23 ` [2.6 patch] remove stale bttv_parse prototype Adrian Bunk
@ 2004-11-10 11:40 ` Fabio Coatti
2004-11-10 12:36 ` 2.6.10-rc1-mm4 Rafael J. Wysocki
2004-11-11 10:17 ` 2.6.10-rc1-mm4 Stefano Rivoir
7 siblings, 1 reply; 47+ messages in thread
From: Fabio Coatti @ 2004-11-10 11:40 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Alle 16:49, martedì 9 novembre 2004, Andrew Morton ha scritto:
> - A process matter: I'm now tracking any regressions since 2.6.9, with the
> intention that we not release 2.6.10 until they're all fixed. (Where
> "tracking" means shoving them into a folder called "bugs"). So if anyone
> is aware of any post-2.6.9 regressions, please make sure that I have a copy
> of the email.
usb storage has some problems; IIRC 2.6.9 is OK, the problem is only in mm
series; I can test other versions but it will take some time :)
Maybe it's a minor bug, but it can freeze usb subsystem...
Short description: inserting usb storage device causes problems and device is
not created; this happens with or without ub driver.
I've already reported this, but not for mm4, maybe something is different,
The device works just fine with 2.6.8.1 as provided with mdk cooker (12mdk),
without ub module, the flash pen is seen as sda1.
tests made without ub configured/compiled. Inseting the device, the usual
behaviour is that it is not seen, only error occurs (see below for full
syslog report). Sometimes (say, after 5/6 insertion/removal cycles) the pen
is seen but scsi layer seem to see it twice, then kobject fails.
In this situation, the removal of the device causes a kernel oops and usb
subsystem is gone, with herratic behaviour.
As said, same device is OK with 2.6.8.1 (and anyway, it should cause not harm
even if it is not working, imho...)
Log report:
plugging in/out the device:
====Nov 10 01:18:14 kefk kernel: hub 5-0:1.0: state 5 ports 8 chg ff00 evt
0008
Nov 10 01:18:14 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
001002 POWER sig=se0 CSC
Nov 10 01:18:14 kefk kernel: hub 5-0:1.0: port 3, status 0100, change 0001, 12
Mb/s
Nov 10 01:18:14 kefk kernel: hub 5-0:1.0: debounce: port 3: total 100ms stable
100ms status 0x100
Nov 10 01:18:14 kefk kernel: hub 2-0:1.0: state 5 ports 2 chg fffc evt 0002
Nov 10 01:18:14 kefk kernel: uhci_hcd 0000:00:1d.1: port 1 portsc 0082,00
Nov 10 01:18:14 kefk kernel: hub 2-0:1.0: port 1, status 0100, change 0001, 12
Mb/s
Nov 10 01:18:14 kefk kernel: hub 2-0:1.0: debounce: port 1: total 100ms stable
100ms status 0x100
Nov 10 01:18:15 kefk kernel: uhci_hcd 0000:00:1d.1: suspend_hc
Nov 10 01:18:19 kefk kernel: hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0008
Nov 10 01:18:19 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
001803 POWER sig=j CSC CONNECT
Nov 10 01:18:19 kefk kernel: hub 5-0:1.0: port 3, status 0501, change 0001,
480 Mb/s
Nov 10 01:18:19 kefk kernel: hub 5-0:1.0: debounce: port 3: total 100ms stable
100ms status 0x501
Nov 10 01:18:19 kefk kernel: ehci_hcd 0000:00:1d.7: port 3 high speed
Nov 10 01:18:19 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
001005 POWER sig=se0 PE CONNECT
Nov 10 01:18:19 kefk kernel: usb 5-3: new high speed USB device using ehci_hcd
and address 6
Nov 10 01:18:19 kefk kernel: ehci_hcd 0000:00:1d.7: devpath 3 ep0in 3strikes
Nov 10 01:18:19 kefk kernel: ehci_hcd 0000:00:1d.7: port 3 full speed -->
companion
Nov 10 01:18:19 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
003801 POWER OWNER sig=j CONNECT
Nov 10 01:18:19 kefk kernel: uhci_hcd 0000:00:1d.1: wakeup_hc
Nov 10 01:18:19 kefk kernel: hub 2-0:1.0: state 5 ports 2 chg fffc evt 0002
Nov 10 01:18:19 kefk kernel: uhci_hcd 0000:00:1d.1: port 1 portsc 0083,00
Nov 10 01:18:19 kefk kernel: hub 2-0:1.0: port 1, status 0101, change 0001, 12
Mb/s
Nov 10 01:18:19 kefk kernel: hub 2-0:1.0: debounce: port 1: total 100ms stable
100ms status 0x101
Nov 10 01:18:19 kefk kernel: usb 2-1: new full speed USB device using uhci_hcd
and address 6
Nov 10 01:18:19 kefk kernel: uhci_hcd 0000:00:1d.1: uhci_result_control:
failed with status 440000
Nov 10 01:18:19 kefk kernel: [f79d6240] link (379d61b2) element (37a65040)
Nov 10 01:18:19 kefk kernel: 0: [f7a65040] link (37a65080) e0 Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2
d(SETUP) (buf=3527a400)
Nov 10 01:18:19 kefk kernel: 1: [f7a65080] link (37a650c0) e3 SPD Active
Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN)
(buf=351fa1c0)
Nov 10 01:18:19 kefk kernel: 2: [f7a650c0] link (00000001) e3 IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT
) (buf=00000000)
Nov 10 01:18:19 kefk kernel:
Nov 10 01:18:19 kefk kernel: usb 2-1: device descriptor read/64, error -71
Nov 10 01:18:19 kefk kernel: uhci_hcd 0000:00:1d.1: uhci_result_control:
failed with status 440000
Nov 10 01:18:19 kefk kernel: [f79d6240] link (379d61b2) element (37a65040)
Nov 10 01:18:19 kefk kernel: 0: [f7a65040] link (37a65080) e0 Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2
d(SETUP) (buf=3527a400)
Nov 10 01:18:19 kefk kernel: 1: [f7a65080] link (37a650c0) e3 SPD Active
Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN)
(buf=351fa1c0)
Nov 10 01:18:19 kefk kernel: 2: [f7a650c0] link (00000001) e3 IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT
) (buf=00000000)
Nov 10 01:18:19 kefk kernel:
Nov 10 01:18:20 kefk kernel: usb 2-1: device descriptor read/64, error -71
Nov 10 01:18:20 kefk kernel: usb 2-1: new full speed USB device using uhci_hcd
and address 7
Nov 10 01:18:20 kefk kernel: uhci_hcd 0000:00:1d.1: uhci_result_control:
failed with status 440000
Nov 10 01:18:20 kefk kernel: [f79d6240] link (379d61b2) element (37a65040)
Nov 10 01:18:20 kefk kernel: 0: [f7a65040] link (37a65080) e0 Stalled
CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2
d(SETUP) (buf=3527a400)
Nov 10 01:18:20 kefk kernel: 1: [f7a65080] link (37a650c0) e3 SPD Active
Length=0 MaxLen=3f DT1 EndPt=0 Dev=0, PID=69(IN) (buf=351fa1c0)
Nov 10 01:18:20 kefk kernel: 2: [f7a650c0] link (00000001) e3 IOC Active
Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)
Nov 10 01:18:20 kefk kernel:
Nov 10 01:18:20 kefk kernel: usb 2-1: device descriptor read/64, error -71
Nov 10 01:18:20 kefk kernel: uhci_hcd 0000:00:1d.1: uhci_result_control:
failed with status 440000
Nov 10 01:18:20 kefk kernel: [f79d6240] link (379d61b2) element (37a65040)
(snip)
===========
(no oopses so far)
Now, plugging in aftere several tries:
Nov 10 01:19:44 kefk kernel: hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0008
Nov 10 01:19:44 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
001803 POWER sig=j CSC CONNECT
Nov 10 01:19:44 kefk kernel: hub 5-0:1.0: port 3, status 0501, change 0001,
480 Mb/s
Nov 10 01:19:44 kefk kernel: hub 5-0:1.0: debounce: port 3: total 100ms stable
100ms status 0x501
Nov 10 01:19:44 kefk kernel: ehci_hcd 0000:00:1d.7: port 3 high speed
Nov 10 01:19:44 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
001005 POWER sig=se0 PE CONNECT
Nov 10 01:19:44 kefk kernel: usb 5-3: new high speed USB device using ehci_hcd
and address 8
Nov 10 01:19:44 kefk kernel: ehci_hcd 0000:00:1d.7: port 3 high speed
Nov 10 01:19:44 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
001005 POWER sig=se0 PE CONNECT
Nov 10 01:19:44 kefk kernel: usb 5-3: new device strings: Mfr=1, Product=2,
SerialNumber=3
Nov 10 01:19:44 kefk kernel: usb 5-3: default language 0x0409
Nov 10 01:19:44 kefk kernel: usb 5-3: Product: Mass storage
Nov 10 01:19:44 kefk kernel: usb 5-3: Manufacturer: USB
Nov 10 01:19:44 kefk kernel: usb 5-3: SerialNumber: 142E19413C2FCA34
Nov 10 01:19:44 kefk kernel: usb 5-3: hotplug
Nov 10 01:19:44 kefk kernel: usb 5-3: adding 5-3:1.0 (config #1, interface 0)
Nov 10 01:19:44 kefk kernel: usb 5-3:1.0: hotplug
Nov 10 01:19:44 kefk kernel: Initializing USB Mass Storage driver...
Nov 10 01:19:44 kefk kernel: usb-storage 5-3:1.0: usb_probe_interface
Nov 10 01:19:44 kefk kernel: usb-storage 5-3:1.0: usb_probe_interface - got id
Nov 10 01:19:44 kefk kernel: scsi3 : SCSI emulation for USB Mass Storage
devices
Nov 10 01:19:44 kefk kernel: usbcore: registered new driver usb-storage
Nov 10 01:19:44 kefk kernel: USB Mass Storage support registered.
Nov 10 01:19:44 kefk kernel: usb-storage: device found at 8
Nov 10 01:19:44 kefk kernel: usb-storage: waiting for device to settle before
scanning
Nov 10 01:19:49 kefk kernel: Vendor: 512MB Model: USB2.0FlashDrive Rev:
2.00
Nov 10 01:19:49 kefk kernel: Type: Direct-Access ANSI
SCSI revision: 02
Nov 10 01:19:49 kefk kernel: sdb: Unit Not Ready, sense:
Nov 10 01:19:49 kefk kernel: Current : sense = 70 6
Nov 10 01:19:49 kefk kernel: ASC=28 ASCQ= 0
Nov 10 01:19:49 kefk kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00
0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x00 0x00
Nov 10 01:19:49 kefk kernel: sdb : READ CAPACITY failed.
Nov 10 01:19:49 kefk kernel: sdb : status=1, message=00, host=0, driver=08
Nov 10 01:19:49 kefk kernel: Current sd: sense = 70 6
Nov 10 01:19:49 kefk kernel: ASC=28 ASCQ= 0
Nov 10 01:19:49 kefk kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00
0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00
0x00 0x00
Nov 10 01:19:49 kefk kernel: sdb: test WP failed, assume Write Enabled
Nov 10 01:19:49 kefk kernel: sdb: assuming drive cache: write through
Nov 10 01:19:49 kefk kernel: sdb: Unit Not Ready, sense:
Nov 10 01:19:49 kefk kernel: Current : sense = 70 6
Nov 10 01:19:49 kefk kernel: ASC=28 ASCQ= 0
Nov 10 01:19:49 kefk kernel: Raw sense data:0x70 0x00 0x06 0x00 0x00 0x00 0x00
0x0a 0x00 0x00 0x00 0x00 0x28 0x00 0x00 0x00
0x00 0x00
Nov 10 01:19:49 kefk kernel: SCSI device sdb: 1024000 512-byte hdwr sectors
(524 MB)
Nov 10 01:19:49 kefk kernel: sdb: Write Protect is off
Nov 10 01:19:49 kefk kernel: sdb: Mode Sense: 03 00 00 00
Nov 10 01:19:49 kefk kernel: sdb: assuming drive cache: write through
Nov 10 01:19:49 kefk kernel: SCSI device sdb: 1024000 512-byte hdwr sectors
(524 MB)
Nov 10 01:19:49 kefk kernel: sdb: Write Protect is off
Nov 10 01:19:49 kefk kernel: sdb: Mode Sense: 03 00 00 00
Nov 10 01:19:49 kefk kernel: sdb: assuming drive cache: write through
Nov 10 01:19:49 kefk kernel: sdb: sdb1
Nov 10 01:19:49 kefk kernel: sdb: sdb1
Nov 10 01:19:49 kefk kernel: kobject_register failed for <NULL> (-17)
Nov 10 01:19:49 kefk kernel: [.text.lock.kobject+4/100]
kobject_register+0x51/0x5f
Nov 10 01:19:49 kefk kernel: [<c01f3a3c>] kobject_register+0x51/0x5f
Nov 10 01:19:49 kefk kernel: [del_gendisk+25/213] add_partition+0xbb/0xf0
Nov 10 01:19:49 kefk kernel: [<c0186448>] add_partition+0xbb/0xf0
Nov 10 01:19:49 kefk kernel: [parse_extended+188/662]
register_disk+0xee/0x11d
Nov 10 01:19:49 kefk kernel: [<c01865c0>] register_disk+0xee/0x11d
Nov 10 01:19:49 kefk kernel: [invalidate_partition+52/66] add_disk+0x36/0x41
Nov 10 01:19:49 kefk kernel: [<c02585c6>] add_disk+0x36/0x41
Nov 10 01:19:49 kefk kernel: [bdev_read_only+10/32] exact_match+0x0/0x7
Nov 10 01:19:49 kefk kernel: [<c025857c>] exact_match+0x0/0x7
Nov 10 01:19:49 kefk kernel: [bdev_read_only+17/32] exact_lock+0x0/0xd
Nov 10 01:19:49 kefk kernel: [<c0258583>] exact_lock+0x0/0xd
Nov 10 01:19:49 kefk kernel: [get_sectorsize+91/527] sd_probe+0x224/0x32f
Nov 10 01:19:49 kefk kernel: [<c0298dba>] sd_probe+0x224/0x32f
Nov 10 01:19:49 kefk kernel: [sysfs_lookup+10/199]
sysfs_make_dirent+0x1c/0x84
Nov 10 01:19:49 kefk kernel: [<c0187b6c>] sysfs_make_dirent+0x1c/0x84
Nov 10 01:19:49 kefk kernel: [sysfs_lookup+10/199]
sysfs_make_dirent+0x1c/0x84
Nov 10 01:19:49 kefk kernel: [<c0187b6c>] sysfs_make_dirent+0x1c/0x84
Nov 10 01:19:49 kefk kernel: [class_register+51/108]
driver_probe_device+0x29/0x6a
Nov 10 01:19:49 kefk kernel: [<c024fde4>] driver_probe_device+0x29/0x6a
Nov 10 01:19:49 kefk kernel: [class_device_dev_link+24/26]
device_attach+0x46/0xaa
Nov 10 01:19:49 kefk kernel: [<c024fe6b>] device_attach+0x46/0xaa
Nov 10 01:19:49 kefk kernel: [d_prune_aliases+59/145] dput+0x76/0x209
Nov 10 01:19:49 kefk kernel: [<c016a092>] dput+0x76/0x209
Nov 10 01:19:49 kefk kernel: [class_device_add_attrs+40/153]
bus_add_device+0x55/0x97
Nov 10 01:19:49 kefk kernel: [<c0250132>] bus_add_device+0x55/0x97
Nov 10 01:19:49 kefk kernel: [device_attach+33/170] device_add+0xb9/0x15c
Nov 10 01:19:49 kefk kernel: [<c024f132>] device_add+0xb9/0x15c
Nov 10 01:19:49 kefk kernel: [proc_scsi_devinfo_read+72/169]
scsi_sysfs_add_sdev+0xa0/0x309
Nov 10 01:19:49 kefk kernel: [<c02770aa>] scsi_sysfs_add_sdev+0xa0/0x309
Nov 10 01:19:49 kefk kernel: [scsi_scan+109/193] scsi_add_lun+0x2d9/0x32f
Nov 10 01:19:49 kefk kernel: [<c0275cce>] scsi_add_lun+0x2d9/0x32f
Nov 10 01:19:49 kefk kernel: [show_sg_tablesize+41/42]
scsi_probe_and_add_lun+0xbd/0x1a9
Nov 10 01:19:49 kefk kernel: [<c0275de1>] scsi_probe_and_add_lun+0xbd/0x1a9
Nov 10 01:19:49 kefk kernel: [scsi_sysfs_add_sdev+349/777]
scsi_scan_target+0x9a/0x106
Nov 10 01:19:49 kefk kernel: [<c027651b>] scsi_scan_target+0x9a/0x106
Nov 10 01:19:49 kefk kernel: [scsi_sysfs_add_sdev+581/777]
scsi_scan_channel+0x7c/0x9a
Nov 10 01:19:49 kefk kernel: [<c0276603>] scsi_scan_channel+0x7c/0x9a
Nov 10 01:19:49 kefk kernel: [scsi_sysfs_add_sdev+721/777]
scsi_scan_host_selected+0x6e/0xc7
Nov 10 01:19:49 kefk kernel: [<c027668f>] scsi_scan_host_selected+0x6e/0xc7
Nov 10 01:19:49 kefk kernel: [scsi_remove_device+66/153]
scsi_scan_host+0x21/0x25
Nov 10 01:19:49 kefk kernel: [<c0276709>] scsi_scan_host+0x21/0x25
Nov 10 01:19:49 kefk kernel: [pg0+946468872/1069159424]
usb_stor_scan_thread+0x134/0x145 [usb_storage]
Nov 10 01:19:49 kefk kernel: [<f8afc808>] usb_stor_scan_thread+0x134/0x145
[usb_storage]
Nov 10 01:19:49 kefk kernel: [wake_up_bit+24/38]
autoremove_wake_function+0x0/0x43
Nov 10 01:19:49 kefk kernel: [<c012e761>] autoremove_wake_function+0x0/0x43
Nov 10 01:19:49 kefk kernel: [ret_from_intr+1/27] ret_from_fork+0x6/0x14
Nov 10 01:19:49 kefk kernel: [<c0103caa>] ret_from_fork+0x6/0x14
Nov 10 01:19:49 kefk kernel: [wake_up_bit+24/38]
autoremove_wake_function+0x0/0x43
Nov 10 01:19:49 kefk kernel: [<c012e761>] autoremove_wake_function+0x0/0x43
Nov 10 01:19:49 kefk kernel: [pg0+946468564/1069159424]
usb_stor_scan_thread+0x0/0x145 [usb_storage]
Nov 10 01:19:49 kefk kernel: [<f8afc6d4>] usb_stor_scan_thread+0x0/0x145
[usb_storage]
Nov 10 01:19:49 kefk kernel: [kernel_thread+10/156]
kernel_thread_helper+0x5/0xb
Nov 10 01:19:49 kefk kernel: [<c0102035>] kernel_thread_helper+0x5/0xb
Nov 10 01:19:49 kefk kernel: Attached scsi removable disk sdb at scsi3,
channel 0, id 0, lun 0
Nov 10 01:19:49 kefk kernel: Attached scsi generic sg4 at scsi3, channel 0, id
0, lun 0, type 0
Nov 10 01:19:49 kefk kernel: usb-storage: device scan complete
Nov 10 01:19:49 kefk scsi.agent[7407]: disk
at /devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3:1.0/host3/target3:0:0/3:0:0:0
=====================================
Finally, the kernel oops on device removal:
Nov 10 01:20:12 kefk kernel: hub 5-0:1.0: state 5 ports 8 chg ff00 evt 0008
Nov 10 01:20:12 kefk kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status
001002 POWER sig=se0 CSC
Nov 10 01:20:12 kefk kernel: hub 5-0:1.0: port 3, status 0100, change 0001, 12
Mb/s
Nov 10 01:20:12 kefk kernel: usb 5-3: USB disconnect, address 8
Nov 10 01:20:12 kefk kernel: usb 5-3: usb_disable_device nuking all URBs
Nov 10 01:20:12 kefk kernel: usb 5-3: unregistering interface 5-3:1.0
Nov 10 01:20:12 kefk kernel: Unable to handle kernel NULL pointer dereference
at virtual address 00000050
Nov 10 01:20:12 kefk kernel: printing eip:
Nov 10 01:20:12 kefk kernel: c01880b4
Nov 10 01:20:12 kefk kernel: *pde = 00000000
Nov 10 01:20:12 kefk kernel: Oops: 0000 [#1]
Nov 10 01:20:12 kefk kernel: PREEMPT SMP
Nov 10 01:20:12 kefk kernel: Modules linked in: usb_storage tun lp parport_pc
md5 ipv6 rfcomm l2cap bluetooth snd_seq_oss snd_seq_midi_event snd_seq
snd_pcm_oss snd_mixer_oss snd_emu10k1 snd_rawmidi snd_seq_device
snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd
soundcore ipt_REJECT iptable_filter ip_tables loop nls_utf8 ide_cd i2c_dev
w83781d i2c_sensor i2c_isa i2c_i801 isofs zlib_inflate e1000 ppa parport
ehci_hcd usblp uhci_hcd genrtc
Nov 10 01:20:12 kefk kernel: CPU: 0
Nov 10 01:20:12 kefk kernel: EIP: 0060:[sysfs_readdir+164/622] Tainted:
P VLI
Nov 10 01:20:12 kefk kernel: EIP: 0060:[<c01880b4>] Tainted: P VLI
Nov 10 01:20:12 kefk kernel: EFLAGS: 00010246 (2.6.10-rc1-mm4)
Nov 10 01:20:12 kefk kernel: EIP is at sysfs_remove_dir+0x1d/0x10b
Nov 10 01:20:12 kefk kernel: eax: f5277588 ebx: f5277588 ecx: f7927b40
edx: 00000002
Nov 10 01:20:12 kefk kernel: esi: f527a920 edi: 00000000 ebp: f70d1124
esp: c1bbfdd8
Nov 10 01:20:12 kefk kernel: ds: 007b es: 007b ss: 0068
Nov 10 01:20:12 kefk kernel: Process khubd (pid: 139, threadinfo=c1bbf000
task=c1b8b530)
Nov 10 01:20:12 kefk kernel: Stack: f78a4b74 00000000 f5277588 f527a920
00000001 f70d1124 c01f3b4c f5277588
Nov 10 01:20:12 kefk kernel: c01f3b5c f5182980 c01867c8 f7967994
f527a920 c03bf224 f70d1124 c0298edc
Nov 10 01:20:12 kefk kernel: f79679b8 f7967994 c024ffc1 f7967994
f7a92404 f7840800 c02501c7 f7967994
Nov 10 01:20:12 kefk kernel: Call Trace:
Nov 10 01:20:12 kefk kernel: [send_uevent+125/398] kobject_del+0x14/0x1c
Nov 10 01:20:12 kefk kernel: [<c01f3b4c>] kobject_del+0x14/0x1c
Nov 10 01:20:12 kefk kernel: [send_uevent+141/398]
kobject_unregister+0x8/0x10
Nov 10 01:20:12 kefk kernel: [<c01f3b5c>] kobject_unregister+0x8/0x10
Nov 10 01:20:12 kefk kernel: [msdos_partition+40/804] del_gendisk+0x1d/0xd5
Nov 10 01:20:12 kefk kernel: [<c01867c8>] del_gendisk+0x1d/0xd5
Nov 10 01:20:12 kefk kernel: [get_sectorsize+381/527] sd_remove+0x17/0x52
Nov 10 01:20:12 kefk kernel: [<c0298edc>] sd_remove+0x17/0x52
Nov 10 01:20:12 kefk kernel: [class_hotplug+20/349]
device_release_driver+0x6d/0x6f
Nov 10 01:20:12 kefk kernel: [<c024ffc1>] device_release_driver+0x6d/0x6f
Nov 10 01:20:12 kefk kernel: [class_device_remove_attrs+36/85]
bus_remove_device+0x53/0x90
Nov 10 01:20:12 kefk kernel: [<c02501c7>] bus_remove_device+0x53/0x90
Nov 10 01:20:12 kefk kernel: [device_release_driver+26/111]
device_del+0x54/0x91
Nov 10 01:20:12 kefk kernel: [<c024f25a>] device_del+0x54/0x91
Nov 10 01:20:12 kefk kernel: [scsi_proc_hostdir_add+18/116]
scsi_remove_device+0x4e/0x99
Nov 10 01:20:12 kefk kernel: [<c0277361>] scsi_remove_device+0x4e/0x99
Nov 10 01:20:12 kefk kernel: [scsi_remove_device+115/153]
scsi_forget_host+0x2d/0x4f
Nov 10 01:20:12 kefk kernel: [<c027673a>] scsi_forget_host+0x2d/0x4f
Nov 10 01:20:12 kefk kernel: [scsi_ioctl_send_command+746/755]
scsi_remove_host+0x8/0x59
Nov 10 01:20:12 kefk kernel: [<c0270a3b>] scsi_remove_host+0x8/0x59
Nov 10 01:20:12 kefk kernel: [pg0+946469553/1069159424]
storage_disconnect+0x7b/0x8d [usb_storage]
Nov 10 01:20:12 kefk kernel: [<f8afcab1>] storage_disconnect+0x7b/0x8d
[usb_storage]
Nov 10 01:20:12 kefk kernel: [usb_buffer_free+57/65]
usb_unbind_interface+0x5e/0x60
Nov 10 01:20:12 kefk kernel: [<c02a4bdd>] usb_unbind_interface+0x5e/0x60
Nov 10 01:20:12 kefk kernel: [class_hotplug+20/349]
device_release_driver+0x6d/0x6f
Nov 10 01:20:12 kefk kernel: [<c024ffc1>] device_release_driver+0x6d/0x6f
Nov 10 01:20:12 kefk kernel: [class_device_remove_attrs+36/85]
bus_remove_device+0x53/0x90
Nov 10 01:20:12 kefk kernel: [<c02501c7>] bus_remove_device+0x53/0x90
Nov 10 01:20:12 kefk kernel: [device_release_driver+26/111]
device_del+0x54/0x91
Nov 10 01:20:12 kefk kernel: [<c024f25a>] device_del+0x54/0x91
Nov 10 01:20:12 kefk kernel: [usb_parse_interface+293/855]
usb_disable_device+0xda/0x147
Nov 10 01:20:12 kefk kernel: [<c02ac9e3>] usb_disable_device+0xda/0x147
Nov 10 01:20:12 kefk kernel: [hub_port_init+472/1396]
usb_disconnect+0xa8/0x188
Nov 10 01:20:12 kefk kernel: [<c02a73e5>] usb_disconnect+0xa8/0x188
Nov 10 01:20:12 kefk kernel: [usb_reset_device+612/1048]
hub_port_connect_change+0x344/0x477
Nov 10 01:20:12 kefk kernel: [<c02a88af>] hub_port_connect_change+0x344/0x477
Nov 10 01:20:12 kefk kernel: [hub_configure+768/2327]
clear_port_feature+0x48/0x4d
Nov 10 01:20:12 kefk kernel: [<c02a5b7c>] clear_port_feature+0x48/0x4d
Nov 10 01:20:12 kefk kernel: [rh_call_control+178/1137]
hub_events+0x32a/0x4f6
Nov 10 01:20:12 kefk kernel: [<c02a8d0c>] hub_events+0x32a/0x4f6
Nov 10 01:20:12 kefk kernel: [rh_call_control+691/1137] hub_thread+0x35/0x10e
Nov 10 01:20:12 kefk kernel: [<c02a8f0d>] hub_thread+0x35/0x10e
Nov 10 01:20:12 kefk kernel: [wake_up_bit+24/38]
autoremove_wake_function+0x0/0x43
Nov 10 01:20:12 kefk kernel: [<c012e761>] autoremove_wake_function+0x0/0x43
Nov 10 01:20:12 kefk kernel: [ret_from_intr+1/27] ret_from_fork+0x6/0x14
Nov 10 01:20:12 kefk kernel: [<c0103caa>] ret_from_fork+0x6/0x14
Nov 10 01:20:12 kefk kernel: [wake_up_bit+24/38]
autoremove_wake_function+0x0/0x43
Nov 10 01:20:12 kefk kernel: [<c012e761>] autoremove_wake_function+0x0/0x43
Nov 10 01:20:12 kefk kernel: [rh_call_control+638/1137] hub_thread+0x0/0x10e
Nov 10 01:20:12 kefk kernel: [<c02a8ed8>] hub_thread+0x0/0x10e
Nov 10 01:20:12 kefk kernel: [kernel_thread+10/156]
kernel_thread_helper+0x5/0xb
Nov 10 01:20:12 kefk kernel: [<c0102035>] kernel_thread_helper+0x5/0xb
Nov 10 01:20:12 kefk kernel: Code: 12 1e 33 c0 e9 39 ff ff ff e9 0e ff ff ff
55 57 56 53 83 ec 08 8b 78 30 85 ff 74 0d 8b 07
85 c0 0f 84 e6 00 00 00 f0 ff 07 85 ff <8b> 4f 50 0f 84 ab 00 00 00 8b 57 10
f0 ff 4a 78 0f 88 03 07 00
More details on request :)
--
Fabio "Cova" Coatti http://members.ferrara.linux.it/cova
Ferrara Linux Users Group http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646 BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-10 11:40 ` 2.6.10-rc1-mm4 Fabio Coatti
@ 2004-11-10 12:36 ` Rafael J. Wysocki
0 siblings, 0 replies; 47+ messages in thread
From: Rafael J. Wysocki @ 2004-11-10 12:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Fabio Coatti, Andrew Morton
On Wednesday 10 of November 2004 12:40, Fabio Coatti wrote:
> Alle 16:49, martedě 9 novembre 2004, Andrew Morton ha scritto:
>
> > - A process matter: I'm now tracking any regressions since 2.6.9, with the
> > intention that we not release 2.6.10 until they're all fixed. (Where
> > "tracking" means shoving them into a folder called "bugs"). So if
anyone
> > is aware of any post-2.6.9 regressions, please make sure that I have a
copy
> > of the email.
>
> usb storage has some problems; IIRC 2.6.9 is OK, the problem is only in mm
> series; I can test other versions but it will take some time :)
> Maybe it's a minor bug, but it can freeze usb subsystem...
>
> Short description: inserting usb storage device causes problems and device
is
> not created; this happens with or without ub driver.
> I've already reported this, but not for mm4, maybe something is different,
Confirmed for -mm4 on AMD64 (two different configurations). Plain -rc1 works
fine on both.
Greets,
RJW
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
^ permalink raw reply [flat|nested] 47+ messages in thread
* Re: 2.6.10-rc1-mm4
2004-11-09 15:49 2.6.10-rc1-mm4 Andrew Morton
` (6 preceding siblings ...)
2004-11-10 11:40 ` 2.6.10-rc1-mm4 Fabio Coatti
@ 2004-11-11 10:17 ` Stefano Rivoir
2004-11-11 10:24 ` 2.6.10-rc1-mm4 Andrew Morton
7 siblings, 1 reply; 47+ messages in thread
From: Stefano Rivoir @ 2004-11-11 10:17 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 416 bytes --]
Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.10-rc1/2.6.10-rc1-mm4/
Just FYI, -mm series on my box always had* the same "trivial" problem:
shutdown won't switch the box off, it just prints "acpi_power_off
called" and then I have to switch it off manually. Not a big deal, but...
Here attached lspci and .config
Bye.
* at least since 2.6.7 series
--
Stefano RIVOIR
[-- Attachment #2: lspci --]
[-- Type: text/plain, Size: 5605 bytes --]
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e7800000-e7ffffff
Prefetchable memory behind bridge: eff00000-febfffff
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
Flags: bus master, medium devsel, latency 0
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Flags: medium devsel
I/O ports at e800 [size=32]
0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1737
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [64] Power Management version 2
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 1738
Flags: bus master, medium devsel, latency 32
I/O ports at b800 [size=16]
Capabilities: [58] Power Management version 2
0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: Asustek Computer, Inc.: Unknown device 1736
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at b400 [size=256]
I/O ports at b000 [size=128]
Capabilities: [48] Power Management version 2
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: Asustek Computer, Inc.: Unknown device 1733
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a800 [size=256]
I/O ports at a400 [size=128]
Capabilities: [48] Power Management version 2
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 1739
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 173a
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 1734
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
0000:00:0a.1 CardBus bridge: ENE Technology Inc CB720 Cardbus Controller (rev 01)
Subsystem: Asustek Computer, Inc.: Unknown device 1734
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 20c00000-20fff000 (prefetchable)
Memory window 1: 21000000-213ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
16-bit legacy interface ports at 0001
0000:00:0a.2 FLASH memory: ENE Technology Inc CB710 Memory Card Reader Controller
Subsystem: Asustek Computer, Inc.: Unknown device 173b
Flags: medium devsel, IRQ 11
I/O ports at 9800 [size=128]
Capabilities: [a0] Power Management version 2
0000:00:0d.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
Subsystem: Asustek Computer, Inc.: Unknown device 173c
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
I/O ports at 9400 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] (rev 01) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 1732
Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at d800 [size=256]
Memory at e7800000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 28794 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc1-mm4
# Tue Nov 9 17:39:03 2004
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_KERN_PHYS_OFFSET=1
# CONFIG_KEXEC is not set
#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
# CONFIG_ACPI_THINKPAD is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
#
# Device Drivers
#
#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
# CONFIG_IP_NF_MATCH_IPRANGE is not set
CONFIG_IP_NF_MATCH_MAC=m
# CONFIG_IP_NF_MATCH_PKTTYPE is not set
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_DSCP is not set
# CONFIG_IP_NF_MATCH_AH_ESP is not set
# CONFIG_IP_NF_MATCH_LENGTH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_TCPMSS is not set
# CONFIG_IP_NF_MATCH_HELPER is not set
CONFIG_IP_NF_MATCH_STATE=m
# CONFIG_IP_NF_MATCH_CONNTRACK is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_UINPUT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_4KSTACKS is not set
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
^ permalink raw reply [flat|nested] 47+ messages in thread* Re: 2.6.10-rc1-mm4
2004-11-11 10:17 ` 2.6.10-rc1-mm4 Stefano Rivoir
@ 2004-11-11 10:24 ` Andrew Morton
0 siblings, 0 replies; 47+ messages in thread
From: Andrew Morton @ 2004-11-11 10:24 UTC (permalink / raw)
To: Stefano Rivoir; +Cc: linux-kernel
Stefano Rivoir <s.rivoir@gts.it> wrote:
>
> Just FYI, -mm series on my box always had* the same "trivial" problem:
> shutdown won't switch the box off, it just prints "acpi_power_off
> called" and then I have to switch it off manually. Not a big deal, but...
>
> * at least since 2.6.7 series
That's pretty weird. There's not much that has been in -mm for that long
without going into Linus's tree. hmm..
Please let us know asap if this problem starts occurring in Linus's tree.
That at least will help identify the offending patch.
^ permalink raw reply [flat|nested] 47+ messages in thread