From: John Bonesio <bones@secretlab.ca> To: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org, jdl@jdl.com, glikely@secretlab.ca, devicetree-discuss@lists.ozlabs.org, david@gibson.dropbear.id.au Subject: [PATCH 3/5] powerpc/5200: dts: remove unused properties Date: Tue, 16 Nov 2010 12:50:10 -0800 [thread overview] Message-ID: <20101116205010.12146.37154.stgit@riker> (raw) In-Reply-To: <20101116204917.12146.39851.stgit@riker> This patch remove unused properties in dts files in preparation of refactoring the dts files for MPC5200b based boards. Signed-off-by: John Bonesio <bones@secretlab.ca> --- arch/powerpc/boot/dts/cm5200.dts | 2 -- arch/powerpc/boot/dts/lite5200b.dts | 3 --- arch/powerpc/boot/dts/media5200.dts | 2 -- arch/powerpc/boot/dts/motionpro.dts | 2 -- arch/powerpc/boot/dts/pcm030.dts | 2 -- arch/powerpc/boot/dts/pcm032.dts | 2 -- 6 files changed, 0 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 9369dcd..d549897 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -230,8 +230,6 @@ reg = <0 0 0x2000000>; bank-width = <2>; device-width = <2>; - #size-cells = <1>; - #address-cells = <1>; }; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index a74b790..c0a4e45 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -174,7 +174,6 @@ psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; @@ -198,7 +197,6 @@ // PSC4 in uart mode example //serial@2600 { // PSC4 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; //}; @@ -206,7 +204,6 @@ // PSC5 in uart mode example //serial@2800 { // PSC5 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; //}; diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index a70ef68..e027f45 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -185,8 +185,6 @@ // PSC6 in uart mode console: psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; - port-number = <0>; // Logical port assignment reg = <0x2c00 0x100>; interrupts = <2 4 0>; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index f6261ea..3ab4666 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -277,8 +277,6 @@ reg = <0 0 0x01000000>; bank-width = <2>; device-width = <2>; - #size-cells = <1>; - #address-cells = <1>; }; }; }; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 3a4f554..f3e30bb 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -196,7 +196,6 @@ psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; reg = <0x2400 0x100>; interrupts = <2 3 0>; }; @@ -207,7 +206,6 @@ psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; reg = <0x2c00 0x100>; interrupts = <2 4 0>; }; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index 17596c7..e0f2702 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -196,7 +196,6 @@ psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; reg = <0x2400 0x100>; interrupts = <2 3 0>; }; @@ -207,7 +206,6 @@ psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; reg = <0x2c00 0x100>; interrupts = <2 4 0>; };
WARNING: multiple messages have this Message-ID (diff)
From: John Bonesio <bones@secretlab.ca> To: linux-kernel@vger.kernel.org Cc: glikely@secretlab.ca, jdl@jdl.com, linuxppc-dev@lists.ozlabs.org, devicetree-discuss@lists.ozlabs.org, david@gibson.dropbear.id.au Subject: [PATCH 3/5] powerpc/5200: dts: remove unused properties Date: Tue, 16 Nov 2010 12:50:10 -0800 [thread overview] Message-ID: <20101116205010.12146.37154.stgit@riker> (raw) In-Reply-To: <20101116204917.12146.39851.stgit@riker> This patch remove unused properties in dts files in preparation of refactoring the dts files for MPC5200b based boards. Signed-off-by: John Bonesio <bones@secretlab.ca> --- arch/powerpc/boot/dts/cm5200.dts | 2 -- arch/powerpc/boot/dts/lite5200b.dts | 3 --- arch/powerpc/boot/dts/media5200.dts | 2 -- arch/powerpc/boot/dts/motionpro.dts | 2 -- arch/powerpc/boot/dts/pcm030.dts | 2 -- arch/powerpc/boot/dts/pcm032.dts | 2 -- 6 files changed, 0 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 9369dcd..d549897 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -230,8 +230,6 @@ reg = <0 0 0x2000000>; bank-width = <2>; device-width = <2>; - #size-cells = <1>; - #address-cells = <1>; }; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index a74b790..c0a4e45 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -174,7 +174,6 @@ psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; @@ -198,7 +197,6 @@ // PSC4 in uart mode example //serial@2600 { // PSC4 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; //}; @@ -206,7 +204,6 @@ // PSC5 in uart mode example //serial@2800 { // PSC5 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; //}; diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index a70ef68..e027f45 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -185,8 +185,6 @@ // PSC6 in uart mode console: psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; - port-number = <0>; // Logical port assignment reg = <0x2c00 0x100>; interrupts = <2 4 0>; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index f6261ea..3ab4666 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -277,8 +277,6 @@ reg = <0 0 0x01000000>; bank-width = <2>; device-width = <2>; - #size-cells = <1>; - #address-cells = <1>; }; }; }; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 3a4f554..f3e30bb 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -196,7 +196,6 @@ psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; reg = <0x2400 0x100>; interrupts = <2 3 0>; }; @@ -207,7 +206,6 @@ psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; reg = <0x2c00 0x100>; interrupts = <2 4 0>; }; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index 17596c7..e0f2702 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -196,7 +196,6 @@ psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; reg = <0x2400 0x100>; interrupts = <2 3 0>; }; @@ -207,7 +206,6 @@ psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; reg = <0x2c00 0x100>; interrupts = <2 4 0>; };
next prev parent reply other threads:[~2010-11-16 20:50 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-11-16 20:49 [PATCH 0/5] Series short description John Bonesio 2010-11-16 20:49 ` John Bonesio 2010-11-16 20:49 ` John Bonesio 2010-11-16 20:49 ` [PATCH 1/5] scripts: dtc: Merge in changes from the dtc repository John Bonesio 2010-11-16 20:49 ` John Bonesio 2010-11-17 4:59 ` Grant Likely 2010-11-17 4:59 ` Grant Likely 2010-11-17 15:47 ` Jon Loeliger 2010-11-17 15:47 ` Jon Loeliger 2010-11-17 15:47 ` Jon Loeliger 2010-11-18 3:41 ` David Gibson 2010-11-18 3:41 ` David Gibson 2010-11-18 3:41 ` David Gibson 2010-11-17 5:56 ` Kyle Moffett 2010-11-17 5:56 ` Kyle Moffett 2010-11-17 5:56 ` Kyle Moffett 2010-11-17 5:59 ` Grant Likely 2010-11-17 5:59 ` Grant Likely 2010-11-17 5:59 ` Grant Likely 2010-11-17 15:51 ` Jon Loeliger 2010-11-17 15:51 ` Jon Loeliger 2010-11-17 15:51 ` Jon Loeliger 2010-11-17 6:11 ` Grant Likely 2010-11-17 6:11 ` Grant Likely 2010-11-17 6:11 ` Grant Likely 2010-11-17 6:29 ` John Bonesio 2010-11-17 6:29 ` John Bonesio 2010-11-17 6:29 ` John Bonesio 2010-11-16 20:50 ` [PATCH 2/5] powerpc/5200: dts: rename nodes to prepare for refactoring dts files John Bonesio 2010-11-16 20:50 ` John Bonesio 2010-11-17 5:03 ` Grant Likely 2010-11-17 5:03 ` Grant Likely 2010-11-17 5:03 ` Grant Likely 2010-11-16 20:50 ` John Bonesio [this message] 2010-11-16 20:50 ` [PATCH 3/5] powerpc/5200: dts: remove unused properties John Bonesio 2010-11-17 5:05 ` Grant Likely 2010-11-17 5:05 ` Grant Likely 2010-11-17 5:05 ` Grant Likely 2010-11-16 20:50 ` [PATCH 4/5] powerpc/5200: dts: Remove incorrect combatible strings John Bonesio 2010-11-16 20:50 ` John Bonesio 2010-11-17 5:08 ` Grant Likely 2010-11-17 5:08 ` Grant Likely 2010-11-16 20:50 ` [PATCH 5/5] powerpc/5200: dts: refactor dts files John Bonesio 2010-11-16 20:50 ` John Bonesio 2010-11-17 23:28 [PATCH 0/5] refactor dts files for mpc5200b based systems (take 2) John Bonesio 2010-11-17 23:28 ` [PATCH 3/5] powerpc/5200: dts: remove unused properties John Bonesio 2010-11-17 23:28 ` John Bonesio 2011-01-04 1:29 ` Grant Likely 2011-01-04 1:29 ` Grant Likely
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20101116205010.12146.37154.stgit@riker \ --to=bones@secretlab.ca \ --cc=david@gibson.dropbear.id.au \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=glikely@secretlab.ca \ --cc=jdl@jdl.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.