From: Grant Likely <grant.likely@secretlab.ca> To: John Bonesio <bones@secretlab.ca> Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, jdl@jdl.com, glikely@secretlab.ca, devicetree-discuss@lists.ozlabs.org, david@gibson.dropbear.id.au Subject: Re: [PATCH 4/5] powerpc/5200: dts: Remove incorrect combatible strings Date: Tue, 16 Nov 2010 22:08:25 -0700 [thread overview] Message-ID: <20101117050825.GD12084@angua.secretlab.ca> (raw) In-Reply-To: <20101116205019.12146.79445.stgit@riker> On Tue, Nov 16, 2010 at 12:50:19PM -0800, John Bonesio wrote: > This patch removes some incorrect compatible strings on the local plus bus node > in dts files for MPC5200b based systems. > > Signed-off-by: John Bonesio <bones@secretlab.ca> > --- > > arch/powerpc/boot/dts/lite5200b.dts | 2 +- > arch/powerpc/boot/dts/mucmc52.dts | 2 +- > arch/powerpc/boot/dts/pcm032.dts | 2 +- > arch/powerpc/boot/dts/uc101.dts | 2 +- > 4 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts > index c0a4e45..ed8d7ae 100644 > --- a/arch/powerpc/boot/dts/lite5200b.dts > +++ b/arch/powerpc/boot/dts/lite5200b.dts > @@ -295,7 +295,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; Actually, this is change backwards; all of the mpc5200b localbus nodes should be: compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; > diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts > index 8dc212d..b9d3559 100644 > --- a/arch/powerpc/boot/dts/mucmc52.dts > +++ b/arch/powerpc/boot/dts/mucmc52.dts > @@ -217,7 +217,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; > diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts > index e0f2702..085a646 100644 > --- a/arch/powerpc/boot/dts/pcm032.dts > +++ b/arch/powerpc/boot/dts/pcm032.dts > @@ -292,7 +292,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; > diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts > index e00441a..70299a4 100644 > --- a/arch/powerpc/boot/dts/uc101.dts > +++ b/arch/powerpc/boot/dts/uc101.dts > @@ -229,7 +229,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; >
WARNING: multiple messages have this Message-ID (diff)
From: Grant Likely <grant.likely@secretlab.ca> To: John Bonesio <bones@secretlab.ca> Cc: jdl@jdl.com, glikely@secretlab.ca, devicetree-discuss@lists.ozlabs.org, linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, david@gibson.dropbear.id.au Subject: Re: [PATCH 4/5] powerpc/5200: dts: Remove incorrect combatible strings Date: Tue, 16 Nov 2010 22:08:25 -0700 [thread overview] Message-ID: <20101117050825.GD12084@angua.secretlab.ca> (raw) In-Reply-To: <20101116205019.12146.79445.stgit@riker> On Tue, Nov 16, 2010 at 12:50:19PM -0800, John Bonesio wrote: > This patch removes some incorrect compatible strings on the local plus bus node > in dts files for MPC5200b based systems. > > Signed-off-by: John Bonesio <bones@secretlab.ca> > --- > > arch/powerpc/boot/dts/lite5200b.dts | 2 +- > arch/powerpc/boot/dts/mucmc52.dts | 2 +- > arch/powerpc/boot/dts/pcm032.dts | 2 +- > arch/powerpc/boot/dts/uc101.dts | 2 +- > 4 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts > index c0a4e45..ed8d7ae 100644 > --- a/arch/powerpc/boot/dts/lite5200b.dts > +++ b/arch/powerpc/boot/dts/lite5200b.dts > @@ -295,7 +295,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; Actually, this is change backwards; all of the mpc5200b localbus nodes should be: compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; > diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts > index 8dc212d..b9d3559 100644 > --- a/arch/powerpc/boot/dts/mucmc52.dts > +++ b/arch/powerpc/boot/dts/mucmc52.dts > @@ -217,7 +217,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; > diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts > index e0f2702..085a646 100644 > --- a/arch/powerpc/boot/dts/pcm032.dts > +++ b/arch/powerpc/boot/dts/pcm032.dts > @@ -292,7 +292,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; > diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts > index e00441a..70299a4 100644 > --- a/arch/powerpc/boot/dts/uc101.dts > +++ b/arch/powerpc/boot/dts/uc101.dts > @@ -229,7 +229,7 @@ > }; > > localbus { > - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; > + compatible = "fsl,mpc5200b-lpb","simple-bus"; > > #address-cells = <2>; > #size-cells = <1>; >
next prev parent reply other threads:[~2010-11-17 5:08 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2010-11-16 20:49 [PATCH 0/5] Series short description John Bonesio 2010-11-16 20:49 ` John Bonesio 2010-11-16 20:49 ` John Bonesio 2010-11-16 20:49 ` [PATCH 1/5] scripts: dtc: Merge in changes from the dtc repository John Bonesio 2010-11-16 20:49 ` John Bonesio 2010-11-17 4:59 ` Grant Likely 2010-11-17 4:59 ` Grant Likely 2010-11-17 15:47 ` Jon Loeliger 2010-11-17 15:47 ` Jon Loeliger 2010-11-17 15:47 ` Jon Loeliger 2010-11-18 3:41 ` David Gibson 2010-11-18 3:41 ` David Gibson 2010-11-18 3:41 ` David Gibson 2010-11-17 5:56 ` Kyle Moffett 2010-11-17 5:56 ` Kyle Moffett 2010-11-17 5:56 ` Kyle Moffett 2010-11-17 5:59 ` Grant Likely 2010-11-17 5:59 ` Grant Likely 2010-11-17 5:59 ` Grant Likely 2010-11-17 15:51 ` Jon Loeliger 2010-11-17 15:51 ` Jon Loeliger 2010-11-17 15:51 ` Jon Loeliger 2010-11-17 6:11 ` Grant Likely 2010-11-17 6:11 ` Grant Likely 2010-11-17 6:11 ` Grant Likely 2010-11-17 6:29 ` John Bonesio 2010-11-17 6:29 ` John Bonesio 2010-11-17 6:29 ` John Bonesio 2010-11-16 20:50 ` [PATCH 2/5] powerpc/5200: dts: rename nodes to prepare for refactoring dts files John Bonesio 2010-11-16 20:50 ` John Bonesio 2010-11-17 5:03 ` Grant Likely 2010-11-17 5:03 ` Grant Likely 2010-11-17 5:03 ` Grant Likely 2010-11-16 20:50 ` [PATCH 3/5] powerpc/5200: dts: remove unused properties John Bonesio 2010-11-16 20:50 ` John Bonesio 2010-11-17 5:05 ` Grant Likely 2010-11-17 5:05 ` Grant Likely 2010-11-17 5:05 ` Grant Likely 2010-11-16 20:50 ` [PATCH 4/5] powerpc/5200: dts: Remove incorrect combatible strings John Bonesio 2010-11-16 20:50 ` John Bonesio 2010-11-17 5:08 ` Grant Likely [this message] 2010-11-17 5:08 ` Grant Likely 2010-11-16 20:50 ` [PATCH 5/5] powerpc/5200: dts: refactor dts files John Bonesio 2010-11-16 20:50 ` John Bonesio
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20101117050825.GD12084@angua.secretlab.ca \ --to=grant.likely@secretlab.ca \ --cc=bones@secretlab.ca \ --cc=david@gibson.dropbear.id.au \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=glikely@secretlab.ca \ --cc=jdl@jdl.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.