From: Shawn Guo <shawn.guo@linaro.org>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Hui Wang <jason77.wang@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
linux-arm-kernel@lists.infradead.org, linux-can@vger.kernel.org
Subject: Re: [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support
Date: Thu, 28 Jun 2012 19:41:10 +0800 [thread overview]
Message-ID: <20120628114108.GD22990@S2101-09.ap.freescale.net> (raw)
In-Reply-To: <4FEC400F.8010506@pengutronix.de>
On Thu, Jun 28, 2012 at 01:29:19PM +0200, Marc Kleine-Budde wrote:
> I mean which name is more precise, do these gpio enable/standy a "phy"
> or a "transceiver". For example:
> http://www.nxp.com/documents/application_note/AN00094.pdf, this document
> says: TJA1041/1041A high speed CAN transceiver.
>
Isn't term "phy" (physical interface) generally meant to be the same
thing as "transceiver"? I just happened to like the shorter one as
what Hui did in his patch.
But it does not really matter to me, will change the name since you
care about it.
--
Regards,
Shawn
WARNING: multiple messages have this Message-ID (diff)
From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support
Date: Thu, 28 Jun 2012 19:41:10 +0800 [thread overview]
Message-ID: <20120628114108.GD22990@S2101-09.ap.freescale.net> (raw)
In-Reply-To: <4FEC400F.8010506@pengutronix.de>
On Thu, Jun 28, 2012 at 01:29:19PM +0200, Marc Kleine-Budde wrote:
> I mean which name is more precise, do these gpio enable/standy a "phy"
> or a "transceiver". For example:
> http://www.nxp.com/documents/application_note/AN00094.pdf, this document
> says: TJA1041/1041A high speed CAN transceiver.
>
Isn't term "phy" (physical interface) generally meant to be the same
thing as "transceiver"? I just happened to like the shorter one as
what Hui did in his patch.
But it does not really matter to me, will change the name since you
care about it.
--
Regards,
Shawn
next prev parent reply other threads:[~2012-06-28 11:41 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-28 3:21 [PATCH v2 0/2] flexcan driver updates Shawn Guo
2012-06-28 3:21 ` Shawn Guo
2012-06-28 3:21 ` [PATCH v2 1/2] net: flexcan: clock-frequency is optional for device tree probe Shawn Guo
2012-06-28 3:21 ` Shawn Guo
2012-06-28 11:23 ` Dong Aisheng
2012-06-28 11:23 ` Dong Aisheng
2012-06-28 3:21 ` [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support Shawn Guo
2012-06-28 3:21 ` Shawn Guo
2012-06-28 5:22 ` Lothar Waßmann
2012-06-28 5:22 ` Lothar Waßmann
2012-06-28 5:30 ` Shawn Guo
2012-06-28 5:30 ` Shawn Guo
2012-06-28 6:14 ` Hui Wang
2012-06-28 6:14 ` Hui Wang
2012-06-28 6:34 ` Shawn Guo
2012-06-28 6:34 ` Shawn Guo
2012-06-28 7:01 ` Hui Wang
2012-06-28 7:01 ` Hui Wang
2012-06-28 10:32 ` Marc Kleine-Budde
2012-06-28 10:32 ` Marc Kleine-Budde
2012-06-28 10:31 ` Marc Kleine-Budde
2012-06-28 10:31 ` Marc Kleine-Budde
2012-06-28 11:21 ` Shawn Guo
2012-06-28 11:21 ` Shawn Guo
2012-06-28 11:29 ` Marc Kleine-Budde
2012-06-28 11:29 ` Marc Kleine-Budde
2012-06-28 11:41 ` Shawn Guo [this message]
2012-06-28 11:41 ` Shawn Guo
2012-06-28 11:52 ` Shawn Guo
2012-06-28 11:52 ` Shawn Guo
2012-06-28 12:05 ` Shawn Guo
2012-06-28 12:05 ` Shawn Guo
2012-06-28 12:11 ` Dong Aisheng
2012-06-28 12:11 ` Dong Aisheng
2012-06-28 12:19 ` Lothar Waßmann
2012-06-28 12:19 ` Lothar Waßmann
2012-06-28 12:07 ` Lothar Waßmann
2012-06-28 12:07 ` Lothar Waßmann
2012-06-28 12:13 ` Shawn Guo
2012-06-28 12:13 ` Shawn Guo
2012-06-28 12:24 ` Lothar Waßmann
2012-06-28 12:24 ` Lothar Waßmann
2012-07-02 2:55 ` Hui Wang
2012-07-02 2:55 ` Hui Wang
2012-06-28 12:08 ` Kurt Van Dijck
2012-06-28 12:08 ` Kurt Van Dijck
2012-06-28 12:10 ` Marc Kleine-Budde
2012-06-28 12:10 ` Marc Kleine-Budde
2012-06-28 12:16 ` Shawn Guo
2012-06-28 12:16 ` Shawn Guo
2012-06-28 11:39 ` Dong Aisheng
2012-06-28 11:39 ` Dong Aisheng
2012-06-28 11:33 ` Dong Aisheng
2012-06-28 11:33 ` Dong Aisheng
2012-06-28 11:46 ` Shawn Guo
2012-06-28 11:46 ` Shawn Guo
2012-06-28 11:48 ` Dong Aisheng
2012-06-28 11:48 ` Dong Aisheng
2012-06-28 12:00 ` Shawn Guo
2012-06-28 12:00 ` Shawn Guo
2012-06-28 12:02 ` Dong Aisheng
2012-06-28 12:02 ` Dong Aisheng
2012-06-28 12:19 ` Shawn Guo
2012-06-28 12:19 ` Shawn Guo
2012-06-28 12:05 ` Marc Kleine-Budde
2012-06-28 12:05 ` Marc Kleine-Budde
2012-06-28 12:18 ` Dong Aisheng
2012-06-28 12:18 ` Dong Aisheng
2012-06-28 12:32 ` Lothar Waßmann
2012-06-28 12:32 ` Lothar Waßmann
2012-06-28 12:40 ` Shawn Guo
2012-06-28 12:40 ` Shawn Guo
2012-06-28 12:47 ` Dong Aisheng
2012-06-28 12:47 ` Dong Aisheng
2012-06-28 12:39 ` Shawn Guo
2012-06-28 12:39 ` Shawn Guo
2012-06-29 9:27 ` Marc Kleine-Budde
2012-06-29 9:27 ` Marc Kleine-Budde
[not found] ` <502226AB.4050205@gmail.com>
2012-08-08 9:55 ` Marc Kleine-Budde
2012-08-09 2:39 ` Hui Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120628114108.GD22990@S2101-09.ap.freescale.net \
--to=shawn.guo@linaro.org \
--cc=davem@davemloft.net \
--cc=jason77.wang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.