All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@freescale.com>
To: Stefan Agner <stefan@agner.ch>
Cc: <s.hauer@pengutronix.de>, <shawn.guo@freescale.com>,
	<b35083@freescale.com>, <linux-arm-kernel@lists.infradead.org>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 5/6] usb: phy: mxs: Add VF610 USB PHY support
Date: Tue, 22 Jul 2014 09:43:31 +0800	[thread overview]
Message-ID: <20140722014330.GA10650@shlinux1.ap.freescale.net> (raw)
In-Reply-To: <af194168fadd80c26f94da740f1e61ce6603225a.1405702442.git.stefan@agner.ch>

On Fri, Jul 18, 2014 at 07:01:41PM +0200, Stefan Agner wrote:
> This adds support for the USB PHY in Vybrid VF610. We assume that
> the disconnection without VBUS is also needed for Vybrid. For all
> other flags, the presumption of innocence applies.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
>  drivers/usb/phy/phy-mxs-usb.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index c42bdf0..207946b 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = {
>  		MXS_PHY_NEED_IP_FIX,
>  };
>  
> +static const struct mxs_phy_data vf610_phy_data = {
> +	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
> +};
> +
>  static const struct of_device_id mxs_phy_dt_ids[] = {
>  	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
>  	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
>  	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
> +	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
> -- 
> 2.0.1
> 
Acked-by: Peter Chen <peter.chen@freescale.com>

-- 

Best Regards,
Peter Chen

WARNING: multiple messages have this Message-ID (diff)
From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] usb: phy: mxs: Add VF610 USB PHY support
Date: Tue, 22 Jul 2014 09:43:31 +0800	[thread overview]
Message-ID: <20140722014330.GA10650@shlinux1.ap.freescale.net> (raw)
In-Reply-To: <af194168fadd80c26f94da740f1e61ce6603225a.1405702442.git.stefan@agner.ch>

On Fri, Jul 18, 2014 at 07:01:41PM +0200, Stefan Agner wrote:
> This adds support for the USB PHY in Vybrid VF610. We assume that
> the disconnection without VBUS is also needed for Vybrid. For all
> other flags, the presumption of innocence applies.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
>  drivers/usb/phy/phy-mxs-usb.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index c42bdf0..207946b 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -125,10 +125,15 @@ static const struct mxs_phy_data imx6sl_phy_data = {
>  		MXS_PHY_NEED_IP_FIX,
>  };
>  
> +static const struct mxs_phy_data vf610_phy_data = {
> +	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
> +};
> +
>  static const struct of_device_id mxs_phy_dt_ids[] = {
>  	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
>  	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
>  	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
> +	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
> -- 
> 2.0.1
> 
Acked-by: Peter Chen <peter.chen@freescale.com>

-- 

Best Regards,
Peter Chen

  reply	other threads:[~2014-07-22  1:50 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-18 17:01 [PATCH 0/6] vf610: Add USB support Stefan Agner
2014-07-18 17:01 ` Stefan Agner
2014-07-18 17:01 ` [PATCH 1/6] ARM: dts: vf610: add USB PHY and controller Stefan Agner
2014-07-18 17:01   ` Stefan Agner
2014-07-22  2:22   ` Shawn Guo
2014-07-22  2:22     ` Shawn Guo
2014-07-22  9:57     ` Stefan Agner
2014-07-22  9:57       ` Stefan Agner
2014-07-22 13:18       ` Shawn Guo
2014-07-22 13:18         ` Shawn Guo
2014-07-18 17:01 ` [PATCH 2/6] ARM: imx: clk-vf610: add USBPHY clocks Stefan Agner
2014-07-18 17:01   ` Stefan Agner
2014-07-22  2:32   ` Shawn Guo
2014-07-22  2:32     ` Shawn Guo
2014-07-22  6:58     ` Jingchang Lu
2014-07-22  6:58       ` Jingchang Lu
2014-07-18 17:01 ` [PATCH 3/6] ARM: dts: vf610: Add usbmisc for non-core registers Stefan Agner
2014-07-18 17:01   ` Stefan Agner
2014-07-18 17:01 ` [PATCH 4/6] chipidea: usbmisc_imx: Add USB support for VF610 SoCs Stefan Agner
2014-07-18 17:01   ` Stefan Agner
2014-07-22  1:52   ` Peter Chen
2014-07-22  1:52     ` Peter Chen
2014-07-22  2:34   ` Shawn Guo
2014-07-22  2:34     ` Shawn Guo
2014-07-18 17:01 ` [PATCH 5/6] usb: phy: mxs: Add VF610 USB PHY support Stefan Agner
2014-07-18 17:01   ` Stefan Agner
2014-07-22  1:43   ` Peter Chen [this message]
2014-07-22  1:43     ` Peter Chen
2014-07-22  2:16   ` Shawn Guo
2014-07-22  2:16     ` Shawn Guo
2014-07-18 17:01 ` [PATCH 6/6] ARM: dts: vf610-colibri: add USB support Stefan Agner
2014-07-18 17:01   ` Stefan Agner
2014-07-22  0:13 ` [PATCH 0/6] vf610: Add " Peter Chen
2014-07-22  0:13   ` Peter Chen
2014-07-26 12:24   ` Stefan Agner
2014-07-26 12:24     ` Stefan Agner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140722014330.GA10650@shlinux1.ap.freescale.net \
    --to=peter.chen@freescale.com \
    --cc=b35083@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawn.guo@freescale.com \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.