From: Paul Burton <paul.burton@imgtec.com>
To: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: <linux-mips@linux-mips.org>, <devicetree@vger.kernel.org>,
<linux-serial@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<gregkh@linuxfoundation.org>, <mturquette@linaro.org>,
<sboyd@codeaurora.org>, <ralf@linux-mips.org>, <jslaby@suse.cz>,
<tglx@linutronix.de>, <jason@lakedaemon.net>, <lars@metafoo.de>
Subject: Re: [PATCH_V2 00/34] jz4780 & CI20 support
Date: Wed, 4 Feb 2015 16:47:39 +0000 [thread overview]
Message-ID: <20150204164739.GJ1024@NP-P-BURTON> (raw)
In-Reply-To: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com>
On Wed, Feb 04, 2015 at 03:21:29PM +0000, Zubair Lutfullah Kakakhel wrote:
> Hi,
>
> This series introduces initial support for the Ingenic jz4780 SoC & the
> MIPS Creator CI20 board which is based upon it.
>
> The jz4780 shares aspects with jz4740. But jz4740 is platform only.
>
> So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT
> for some things in order to ease the process of sharing code.
>
> Series is based on 3.19-rc7.
>
> ACKS from various subsystems are welcome so that the series can
> go via mips if that is OK with everyone.
>
> Alternative suggestions welcome.
>
> Changes in V2
> - Removed FSF addresses.
> - Removed 2 patches for binding docs that
> were consolidated in the same binding for jz4740.
> - Bug fix in error handling in cgu
> - Rebase on 3.19-rc7
> - Updated defconfig with jz47xx serial and removed initramfs
> - Renames in binding from intc to interrupt-controller
> - Fix in jz47xx serial for build error on x86 in one config option
> - Removed interupt-parent bindings from required bindings
> - Fixed imgtec prefix to img
> - Added jz47xx config for qi_lb60_defconfig
>
> Regards,
> ZubairLK
Hi Zubair,
So first of all, thanks. I've been rather busy & haven't had time to
revise this patchset myself yet so I appreciate your effort.
Having said that, I do find it at best rather rude to take someone elses
patches, modify them & submit them without first:
- Asking the author if that's ok.
- Allowing the author to look over the changes you've made to their
patches.
- Making it clear in the commit message for each patch which
modifications you have made.
As is I now have to go and retroactively check each patch against mine
to find out what's different, since you didn't indicate that in each
patch, and then hope I agree with the changes that you made but which
the patches indicate I authored.
So please, if you should see fit to modify any of my patches in the
future, do the above things first.
Thanks,
Paul
> Paul Burton (34):
> dt: Add Ingenic Semiconductor vendor prefix
> MIPS: jz4740: require & include DT
> MIPS: irq_cpu: declare irqchip table entry
> MIPS: jz4740: probe CPU interrupt controller via DT
> MIPS: jz4740: use generic plat_irq_dispatch
> MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c
> dt: interrupt-controller: Add ingenic,jz4740-intc binding doc
> MIPS: jz4740: allow interrupt controller probe via DT
> MIPS: jz4740: probe interrupt controller via DT
> MIPS: jz4740: remove non-DT interrupt controller init
> MIPS: jz4740: register an irq_domain for the interrupt controller
> MIPS: jz4740: call jz4740_clock_init earlier
> MIPS: jz4740: replace use of jz4740_clock_bdata
> clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks
> dt: clk: Add ingenic,jz4740-cgu binding documentation
> MIPS: clk: migrate jz4740 to common clock framework
> MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu
> MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu
> MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu
> MIPS: jz4740: remove clock.h
> MIPS: jz4740: only detect RAM size if not specified in DT
> MIPS: jz4740: support >32 interrupts
> MIPS: jz4740: define IRQ numbers based on number of intc IRQs
> dt: serial: Add ingenic,jz4740-uart binding
> serial: 8250_jz47xx: support for Ingenic jz47xx UARTs
> MIPS: allow mach-provided serial.h
> MIPS: jz4740: use jz47xx-uart & DT for UART output
> dt: clk: Add ingenic,jz4780-cgu binding documentation
> clk: add Ingenic jz4780 CGU driver
> MIPS: jz4740: add jz4780 interrupt controller support
> MIPS: add jz4780 Ingenic vendor ID
> MIPS: initial Ingenic jz4780 support
> MIPS: initial MIPS Creator CI20 board support
> MIPS: allow jz4780 to be selected in Kconfig
>
> .../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++
> .../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++
> .../interrupt-controller/ingenic,jz4740-intc.txt | 26 +
> .../bindings/serial/ingenic,jz4740-uart.txt | 22 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/mips/Kconfig | 22 +-
> arch/mips/boot/dts/Makefile | 2 +
> arch/mips/boot/dts/ci20.dts | 21 +
> arch/mips/boot/dts/jz4740.dtsi | 68 ++
> arch/mips/boot/dts/jz4780.dtsi | 101 +++
> arch/mips/boot/dts/qi_lb60.dts | 15 +
> arch/mips/configs/ci20_defconfig | 127 +++
> arch/mips/configs/qi_lb60_defconfig | 1 +
> arch/mips/include/asm/Kbuild | 1 -
> arch/mips/include/asm/cpu.h | 1 +
> arch/mips/include/asm/mach-generic/serial.h | 21 +
> arch/mips/include/asm/mach-jz4740/clock.h | 3 +
> arch/mips/include/asm/mach-jz4740/irq.h | 15 +-
> arch/mips/include/asm/mach-jz4740/platform.h | 2 -
> arch/mips/include/asm/mach-jz4740/serial.h | 27 +
> arch/mips/include/asm/serial.h | 21 +
> arch/mips/jz4740/Kconfig | 10 +
> arch/mips/jz4740/Makefile | 6 +-
> arch/mips/jz4740/Platform | 4 +
> arch/mips/jz4740/board-qi_lb60.c | 7 -
> arch/mips/jz4740/clock-debugfs.c | 108 ---
> arch/mips/jz4740/clock.c | 924 ---------------------
> arch/mips/jz4740/clock.h | 76 --
> arch/mips/jz4740/irq.c | 103 ++-
> arch/mips/jz4740/platform.c | 37 +-
> arch/mips/jz4740/pm.c | 2 -
> arch/mips/jz4740/prom.c | 13 -
> arch/mips/jz4740/reset.c | 13 +-
> arch/mips/jz4740/serial.c | 33 -
> arch/mips/jz4740/serial.h | 23 -
> arch/mips/jz4740/setup.c | 33 +-
> arch/mips/jz4740/time.c | 19 +-
> arch/mips/kernel/cpu-probe.c | 1 +
> arch/mips/kernel/irq_cpu.c | 3 +
> drivers/clk/Makefile | 2 +
> drivers/clk/jz47xx/Makefile | 3 +
> drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++
> drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++
> drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++
> drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++
> drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++
> drivers/tty/serial/8250/Kconfig | 9 +
> drivers/tty/serial/8250/Makefile | 1 +
> include/dt-bindings/clock/jz4740-cgu.h | 37 +
> include/dt-bindings/clock/jz4780-cgu.h | 88 ++
> 50 files changed, 3070 insertions(+), 1276 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt
> create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
> create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt
> create mode 100644 arch/mips/boot/dts/ci20.dts
> create mode 100644 arch/mips/boot/dts/jz4740.dtsi
> create mode 100644 arch/mips/boot/dts/jz4780.dtsi
> create mode 100644 arch/mips/boot/dts/qi_lb60.dts
> create mode 100644 arch/mips/configs/ci20_defconfig
> create mode 100644 arch/mips/include/asm/mach-generic/serial.h
> create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h
> create mode 100644 arch/mips/include/asm/serial.h
> delete mode 100644 arch/mips/jz4740/clock-debugfs.c
> delete mode 100644 arch/mips/jz4740/clock.c
> delete mode 100644 arch/mips/jz4740/clock.h
> delete mode 100644 arch/mips/jz4740/serial.c
> delete mode 100644 arch/mips/jz4740/serial.h
> create mode 100644 drivers/clk/jz47xx/Makefile
> create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h
> create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c
> create mode 100644 include/dt-bindings/clock/jz4740-cgu.h
> create mode 100644 include/dt-bindings/clock/jz4780-cgu.h
>
> --
> 1.9.1
>
WARNING: multiple messages have this Message-ID (diff)
From: Paul Burton <paul.burton@imgtec.com>
To: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: linux-mips@linux-mips.org, devicetree@vger.kernel.org,
linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
gregkh@linuxfoundation.org, mturquette@linaro.org,
sboyd@codeaurora.org, ralf@linux-mips.org, jslaby@suse.cz,
tglx@linutronix.de, jason@lakedaemon.net, lars@metafoo.de
Subject: Re: [PATCH_V2 00/34] jz4780 & CI20 support
Date: Wed, 4 Feb 2015 16:47:39 +0000 [thread overview]
Message-ID: <20150204164739.GJ1024@NP-P-BURTON> (raw)
In-Reply-To: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com>
On Wed, Feb 04, 2015 at 03:21:29PM +0000, Zubair Lutfullah Kakakhel wrote:
> Hi,
>
> This series introduces initial support for the Ingenic jz4780 SoC & the
> MIPS Creator CI20 board which is based upon it.
>
> The jz4780 shares aspects with jz4740. But jz4740 is platform only.
>
> So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT
> for some things in order to ease the process of sharing code.
>
> Series is based on 3.19-rc7.
>
> ACKS from various subsystems are welcome so that the series can
> go via mips if that is OK with everyone.
>
> Alternative suggestions welcome.
>
> Changes in V2
> - Removed FSF addresses.
> - Removed 2 patches for binding docs that
> were consolidated in the same binding for jz4740.
> - Bug fix in error handling in cgu
> - Rebase on 3.19-rc7
> - Updated defconfig with jz47xx serial and removed initramfs
> - Renames in binding from intc to interrupt-controller
> - Fix in jz47xx serial for build error on x86 in one config option
> - Removed interupt-parent bindings from required bindings
> - Fixed imgtec prefix to img
> - Added jz47xx config for qi_lb60_defconfig
>
> Regards,
> ZubairLK
Hi Zubair,
So first of all, thanks. I've been rather busy & haven't had time to
revise this patchset myself yet so I appreciate your effort.
Having said that, I do find it at best rather rude to take someone elses
patches, modify them & submit them without first:
- Asking the author if that's ok.
- Allowing the author to look over the changes you've made to their
patches.
- Making it clear in the commit message for each patch which
modifications you have made.
As is I now have to go and retroactively check each patch against mine
to find out what's different, since you didn't indicate that in each
patch, and then hope I agree with the changes that you made but which
the patches indicate I authored.
So please, if you should see fit to modify any of my patches in the
future, do the above things first.
Thanks,
Paul
> Paul Burton (34):
> dt: Add Ingenic Semiconductor vendor prefix
> MIPS: jz4740: require & include DT
> MIPS: irq_cpu: declare irqchip table entry
> MIPS: jz4740: probe CPU interrupt controller via DT
> MIPS: jz4740: use generic plat_irq_dispatch
> MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c
> dt: interrupt-controller: Add ingenic,jz4740-intc binding doc
> MIPS: jz4740: allow interrupt controller probe via DT
> MIPS: jz4740: probe interrupt controller via DT
> MIPS: jz4740: remove non-DT interrupt controller init
> MIPS: jz4740: register an irq_domain for the interrupt controller
> MIPS: jz4740: call jz4740_clock_init earlier
> MIPS: jz4740: replace use of jz4740_clock_bdata
> clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks
> dt: clk: Add ingenic,jz4740-cgu binding documentation
> MIPS: clk: migrate jz4740 to common clock framework
> MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu
> MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu
> MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu
> MIPS: jz4740: remove clock.h
> MIPS: jz4740: only detect RAM size if not specified in DT
> MIPS: jz4740: support >32 interrupts
> MIPS: jz4740: define IRQ numbers based on number of intc IRQs
> dt: serial: Add ingenic,jz4740-uart binding
> serial: 8250_jz47xx: support for Ingenic jz47xx UARTs
> MIPS: allow mach-provided serial.h
> MIPS: jz4740: use jz47xx-uart & DT for UART output
> dt: clk: Add ingenic,jz4780-cgu binding documentation
> clk: add Ingenic jz4780 CGU driver
> MIPS: jz4740: add jz4780 interrupt controller support
> MIPS: add jz4780 Ingenic vendor ID
> MIPS: initial Ingenic jz4780 support
> MIPS: initial MIPS Creator CI20 board support
> MIPS: allow jz4780 to be selected in Kconfig
>
> .../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++
> .../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++
> .../interrupt-controller/ingenic,jz4740-intc.txt | 26 +
> .../bindings/serial/ingenic,jz4740-uart.txt | 22 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/mips/Kconfig | 22 +-
> arch/mips/boot/dts/Makefile | 2 +
> arch/mips/boot/dts/ci20.dts | 21 +
> arch/mips/boot/dts/jz4740.dtsi | 68 ++
> arch/mips/boot/dts/jz4780.dtsi | 101 +++
> arch/mips/boot/dts/qi_lb60.dts | 15 +
> arch/mips/configs/ci20_defconfig | 127 +++
> arch/mips/configs/qi_lb60_defconfig | 1 +
> arch/mips/include/asm/Kbuild | 1 -
> arch/mips/include/asm/cpu.h | 1 +
> arch/mips/include/asm/mach-generic/serial.h | 21 +
> arch/mips/include/asm/mach-jz4740/clock.h | 3 +
> arch/mips/include/asm/mach-jz4740/irq.h | 15 +-
> arch/mips/include/asm/mach-jz4740/platform.h | 2 -
> arch/mips/include/asm/mach-jz4740/serial.h | 27 +
> arch/mips/include/asm/serial.h | 21 +
> arch/mips/jz4740/Kconfig | 10 +
> arch/mips/jz4740/Makefile | 6 +-
> arch/mips/jz4740/Platform | 4 +
> arch/mips/jz4740/board-qi_lb60.c | 7 -
> arch/mips/jz4740/clock-debugfs.c | 108 ---
> arch/mips/jz4740/clock.c | 924 ---------------------
> arch/mips/jz4740/clock.h | 76 --
> arch/mips/jz4740/irq.c | 103 ++-
> arch/mips/jz4740/platform.c | 37 +-
> arch/mips/jz4740/pm.c | 2 -
> arch/mips/jz4740/prom.c | 13 -
> arch/mips/jz4740/reset.c | 13 +-
> arch/mips/jz4740/serial.c | 33 -
> arch/mips/jz4740/serial.h | 23 -
> arch/mips/jz4740/setup.c | 33 +-
> arch/mips/jz4740/time.c | 19 +-
> arch/mips/kernel/cpu-probe.c | 1 +
> arch/mips/kernel/irq_cpu.c | 3 +
> drivers/clk/Makefile | 2 +
> drivers/clk/jz47xx/Makefile | 3 +
> drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++
> drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++
> drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++
> drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++
> drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++
> drivers/tty/serial/8250/Kconfig | 9 +
> drivers/tty/serial/8250/Makefile | 1 +
> include/dt-bindings/clock/jz4740-cgu.h | 37 +
> include/dt-bindings/clock/jz4780-cgu.h | 88 ++
> 50 files changed, 3070 insertions(+), 1276 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt
> create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt
> create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt
> create mode 100644 arch/mips/boot/dts/ci20.dts
> create mode 100644 arch/mips/boot/dts/jz4740.dtsi
> create mode 100644 arch/mips/boot/dts/jz4780.dtsi
> create mode 100644 arch/mips/boot/dts/qi_lb60.dts
> create mode 100644 arch/mips/configs/ci20_defconfig
> create mode 100644 arch/mips/include/asm/mach-generic/serial.h
> create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h
> create mode 100644 arch/mips/include/asm/serial.h
> delete mode 100644 arch/mips/jz4740/clock-debugfs.c
> delete mode 100644 arch/mips/jz4740/clock.c
> delete mode 100644 arch/mips/jz4740/clock.h
> delete mode 100644 arch/mips/jz4740/serial.c
> delete mode 100644 arch/mips/jz4740/serial.h
> create mode 100644 drivers/clk/jz47xx/Makefile
> create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c
> create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h
> create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c
> create mode 100644 include/dt-bindings/clock/jz4740-cgu.h
> create mode 100644 include/dt-bindings/clock/jz4780-cgu.h
>
> --
> 1.9.1
>
next prev parent reply other threads:[~2015-02-04 16:47 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-04 15:21 [PATCH_V2 00/34] jz4780 & CI20 support Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 01/34] dt: Add Ingenic Semiconductor vendor prefix Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 02/34] MIPS: jz4740: require & include DT Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 03/34] MIPS: irq_cpu: declare irqchip table entry Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 04/34] MIPS: jz4740: probe CPU interrupt controller via DT Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 17:05 ` Sergei Shtylyov
2015-02-04 15:21 ` [PATCH_V2 05/34] MIPS: jz4740: use generic plat_irq_dispatch Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 06/34] MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 07/34] dt: interrupt-controller: Add ingenic,jz4740-intc binding doc Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 17:07 ` Sergei Shtylyov
2015-02-04 15:21 ` [PATCH_V2 08/34] MIPS: jz4740: allow interrupt controller probe via DT Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 09/34] MIPS: jz4740: probe interrupt controller " Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 17:09 ` Sergei Shtylyov
2015-02-04 15:21 ` [PATCH_V2 10/34] MIPS: jz4740: remove non-DT interrupt controller init Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 11/34] MIPS: jz4740: register an irq_domain for the interrupt controller Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 16:19 ` Arnd Bergmann
2015-02-04 16:19 ` Arnd Bergmann
2015-02-04 15:21 ` [PATCH_V2 12/34] MIPS: jz4740: call jz4740_clock_init earlier Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 13/34] MIPS: jz4740: replace use of jz4740_clock_bdata Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 14/34] clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 15/34] dt: clk: Add ingenic,jz4740-cgu binding documentation Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 16:27 ` Arnd Bergmann
2015-02-04 15:21 ` [PATCH_V2 16/34] MIPS: clk: migrate jz4740 to common clock framework Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 17/34] MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 18/34] MIPS: clk: move jz4740 UDC auto suspend functions " Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 19/34] MIPS: clk: move jz4740 clock suspend, resume " Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 20/34] MIPS: jz4740: remove clock.h Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 21/34] MIPS: jz4740: only detect RAM size if not specified in DT Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 22/34] MIPS: jz4740: support >32 interrupts Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 23/34] MIPS: jz4740: define IRQ numbers based on number of intc IRQs Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 24/34] dt: serial: Add ingenic,jz4740-uart binding Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 25/34] serial: 8250_jz47xx: support for Ingenic jz47xx UARTs Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 21:02 ` Paul Bolle
2015-02-04 15:21 ` [PATCH_V2 26/34] MIPS: allow mach-provided serial.h Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 27/34] MIPS: jz4740: use jz47xx-uart & DT for UART output Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 16:32 ` Arnd Bergmann
2015-02-04 16:32 ` Arnd Bergmann
2015-02-04 15:21 ` [PATCH_V2 28/34] dt: clk: Add ingenic,jz4780-cgu binding documentation Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 29/34] clk: add Ingenic jz4780 CGU driver Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` [PATCH_V2 30/34] MIPS: jz4740: add jz4780 interrupt controller support Zubair Lutfullah Kakakhel
2015-02-04 15:21 ` Zubair Lutfullah Kakakhel
2015-02-04 15:22 ` [PATCH_V2 31/34] MIPS: add jz4780 Ingenic vendor ID Zubair Lutfullah Kakakhel
2015-02-04 15:22 ` Zubair Lutfullah Kakakhel
2015-02-04 15:22 ` [PATCH_V2 32/34] MIPS: initial Ingenic jz4780 support Zubair Lutfullah Kakakhel
2015-02-04 15:22 ` Zubair Lutfullah Kakakhel
2015-02-04 15:22 ` [PATCH_V2 33/34] MIPS: initial MIPS Creator CI20 board support Zubair Lutfullah Kakakhel
2015-02-04 15:22 ` Zubair Lutfullah Kakakhel
2015-02-04 20:56 ` Paul Bolle
2015-02-04 20:56 ` Paul Bolle
2015-02-04 15:22 ` [PATCH_V2 34/34] MIPS: allow jz4780 to be selected in Kconfig Zubair Lutfullah Kakakhel
2015-02-04 15:22 ` Zubair Lutfullah Kakakhel
2015-02-04 16:47 ` Paul Burton [this message]
2015-02-04 16:47 ` [PATCH_V2 00/34] jz4780 & CI20 support Paul Burton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150204164739.GJ1024@NP-P-BURTON \
--to=paul.burton@imgtec.com \
--cc=Zubair.Kakakhel@imgtec.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jason@lakedaemon.net \
--cc=jslaby@suse.cz \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-serial@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=ralf@linux-mips.org \
--cc=sboyd@codeaurora.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.