From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> To: <linux-mips@linux-mips.org> Cc: <devicetree@vger.kernel.org>, <linux-serial@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <Zubair.Kakakhel@imgtec.com>, <gregkh@linuxfoundation.org>, <mturquette@linaro.org>, <sboyd@codeaurora.org>, <ralf@linux-mips.org>, <jslaby@suse.cz>, <tglx@linutronix.de>, <jason@lakedaemon.net>, <lars@metafoo.de>, <paul.burton@imgtec.com> Subject: [PATCH_V2 00/34] jz4780 & CI20 support Date: Wed, 4 Feb 2015 15:21:29 +0000 [thread overview] Message-ID: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com> (raw) Hi, This series introduces initial support for the Ingenic jz4780 SoC & the MIPS Creator CI20 board which is based upon it. The jz4780 shares aspects with jz4740. But jz4740 is platform only. So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT for some things in order to ease the process of sharing code. Series is based on 3.19-rc7. ACKS from various subsystems are welcome so that the series can go via mips if that is OK with everyone. Alternative suggestions welcome. Changes in V2 - Removed FSF addresses. - Removed 2 patches for binding docs that were consolidated in the same binding for jz4740. - Bug fix in error handling in cgu - Rebase on 3.19-rc7 - Updated defconfig with jz47xx serial and removed initramfs - Renames in binding from intc to interrupt-controller - Fix in jz47xx serial for build error on x86 in one config option - Removed interupt-parent bindings from required bindings - Fixed imgtec prefix to img - Added jz47xx config for qi_lb60_defconfig Regards, ZubairLK Paul Burton (34): dt: Add Ingenic Semiconductor vendor prefix MIPS: jz4740: require & include DT MIPS: irq_cpu: declare irqchip table entry MIPS: jz4740: probe CPU interrupt controller via DT MIPS: jz4740: use generic plat_irq_dispatch MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c dt: interrupt-controller: Add ingenic,jz4740-intc binding doc MIPS: jz4740: allow interrupt controller probe via DT MIPS: jz4740: probe interrupt controller via DT MIPS: jz4740: remove non-DT interrupt controller init MIPS: jz4740: register an irq_domain for the interrupt controller MIPS: jz4740: call jz4740_clock_init earlier MIPS: jz4740: replace use of jz4740_clock_bdata clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks dt: clk: Add ingenic,jz4740-cgu binding documentation MIPS: clk: migrate jz4740 to common clock framework MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu MIPS: jz4740: remove clock.h MIPS: jz4740: only detect RAM size if not specified in DT MIPS: jz4740: support >32 interrupts MIPS: jz4740: define IRQ numbers based on number of intc IRQs dt: serial: Add ingenic,jz4740-uart binding serial: 8250_jz47xx: support for Ingenic jz47xx UARTs MIPS: allow mach-provided serial.h MIPS: jz4740: use jz47xx-uart & DT for UART output dt: clk: Add ingenic,jz4780-cgu binding documentation clk: add Ingenic jz4780 CGU driver MIPS: jz4740: add jz4780 interrupt controller support MIPS: add jz4780 Ingenic vendor ID MIPS: initial Ingenic jz4780 support MIPS: initial MIPS Creator CI20 board support MIPS: allow jz4780 to be selected in Kconfig .../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++ .../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++ .../interrupt-controller/ingenic,jz4740-intc.txt | 26 + .../bindings/serial/ingenic,jz4740-uart.txt | 22 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/mips/Kconfig | 22 +- arch/mips/boot/dts/Makefile | 2 + arch/mips/boot/dts/ci20.dts | 21 + arch/mips/boot/dts/jz4740.dtsi | 68 ++ arch/mips/boot/dts/jz4780.dtsi | 101 +++ arch/mips/boot/dts/qi_lb60.dts | 15 + arch/mips/configs/ci20_defconfig | 127 +++ arch/mips/configs/qi_lb60_defconfig | 1 + arch/mips/include/asm/Kbuild | 1 - arch/mips/include/asm/cpu.h | 1 + arch/mips/include/asm/mach-generic/serial.h | 21 + arch/mips/include/asm/mach-jz4740/clock.h | 3 + arch/mips/include/asm/mach-jz4740/irq.h | 15 +- arch/mips/include/asm/mach-jz4740/platform.h | 2 - arch/mips/include/asm/mach-jz4740/serial.h | 27 + arch/mips/include/asm/serial.h | 21 + arch/mips/jz4740/Kconfig | 10 + arch/mips/jz4740/Makefile | 6 +- arch/mips/jz4740/Platform | 4 + arch/mips/jz4740/board-qi_lb60.c | 7 - arch/mips/jz4740/clock-debugfs.c | 108 --- arch/mips/jz4740/clock.c | 924 --------------------- arch/mips/jz4740/clock.h | 76 -- arch/mips/jz4740/irq.c | 103 ++- arch/mips/jz4740/platform.c | 37 +- arch/mips/jz4740/pm.c | 2 - arch/mips/jz4740/prom.c | 13 - arch/mips/jz4740/reset.c | 13 +- arch/mips/jz4740/serial.c | 33 - arch/mips/jz4740/serial.h | 23 - arch/mips/jz4740/setup.c | 33 +- arch/mips/jz4740/time.c | 19 +- arch/mips/kernel/cpu-probe.c | 1 + arch/mips/kernel/irq_cpu.c | 3 + drivers/clk/Makefile | 2 + drivers/clk/jz47xx/Makefile | 3 + drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++ drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++ drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++ drivers/tty/serial/8250/Kconfig | 9 + drivers/tty/serial/8250/Makefile | 1 + include/dt-bindings/clock/jz4740-cgu.h | 37 + include/dt-bindings/clock/jz4780-cgu.h | 88 ++ 50 files changed, 3070 insertions(+), 1276 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt create mode 100644 arch/mips/boot/dts/ci20.dts create mode 100644 arch/mips/boot/dts/jz4740.dtsi create mode 100644 arch/mips/boot/dts/jz4780.dtsi create mode 100644 arch/mips/boot/dts/qi_lb60.dts create mode 100644 arch/mips/configs/ci20_defconfig create mode 100644 arch/mips/include/asm/mach-generic/serial.h create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h create mode 100644 arch/mips/include/asm/serial.h delete mode 100644 arch/mips/jz4740/clock-debugfs.c delete mode 100644 arch/mips/jz4740/clock.c delete mode 100644 arch/mips/jz4740/clock.h delete mode 100644 arch/mips/jz4740/serial.c delete mode 100644 arch/mips/jz4740/serial.h create mode 100644 drivers/clk/jz47xx/Makefile create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c create mode 100644 include/dt-bindings/clock/jz4740-cgu.h create mode 100644 include/dt-bindings/clock/jz4780-cgu.h -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> To: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org, Zubair.Kakakhel@imgtec.com, gregkh@linuxfoundation.org, mturquette@linaro.org, sboyd@codeaurora.org, ralf@linux-mips.org, jslaby@suse.cz, tglx@linutronix.de, jason@lakedaemon.net, lars@metafoo.de, paul.burton@imgtec.com Subject: [PATCH_V2 00/34] jz4780 & CI20 support Date: Wed, 4 Feb 2015 15:21:29 +0000 [thread overview] Message-ID: <1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com> (raw) Hi, This series introduces initial support for the Ingenic jz4780 SoC & the MIPS Creator CI20 board which is based upon it. The jz4780 shares aspects with jz4740. But jz4740 is platform only. So, the jz4740 & qi_lb60 (Ben NanoNote) are converted to use DT for some things in order to ease the process of sharing code. Series is based on 3.19-rc7. ACKS from various subsystems are welcome so that the series can go via mips if that is OK with everyone. Alternative suggestions welcome. Changes in V2 - Removed FSF addresses. - Removed 2 patches for binding docs that were consolidated in the same binding for jz4740. - Bug fix in error handling in cgu - Rebase on 3.19-rc7 - Updated defconfig with jz47xx serial and removed initramfs - Renames in binding from intc to interrupt-controller - Fix in jz47xx serial for build error on x86 in one config option - Removed interupt-parent bindings from required bindings - Fixed imgtec prefix to img - Added jz47xx config for qi_lb60_defconfig Regards, ZubairLK Paul Burton (34): dt: Add Ingenic Semiconductor vendor prefix MIPS: jz4740: require & include DT MIPS: irq_cpu: declare irqchip table entry MIPS: jz4740: probe CPU interrupt controller via DT MIPS: jz4740: use generic plat_irq_dispatch MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c dt: interrupt-controller: Add ingenic,jz4740-intc binding doc MIPS: jz4740: allow interrupt controller probe via DT MIPS: jz4740: probe interrupt controller via DT MIPS: jz4740: remove non-DT interrupt controller init MIPS: jz4740: register an irq_domain for the interrupt controller MIPS: jz4740: call jz4740_clock_init earlier MIPS: jz4740: replace use of jz4740_clock_bdata clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks dt: clk: Add ingenic,jz4740-cgu binding documentation MIPS: clk: migrate jz4740 to common clock framework MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu MIPS: clk: move jz4740 UDC auto suspend functions to jz4740-cgu MIPS: clk: move jz4740 clock suspend, resume functions to jz4740-cgu MIPS: jz4740: remove clock.h MIPS: jz4740: only detect RAM size if not specified in DT MIPS: jz4740: support >32 interrupts MIPS: jz4740: define IRQ numbers based on number of intc IRQs dt: serial: Add ingenic,jz4740-uart binding serial: 8250_jz47xx: support for Ingenic jz47xx UARTs MIPS: allow mach-provided serial.h MIPS: jz4740: use jz47xx-uart & DT for UART output dt: clk: Add ingenic,jz4780-cgu binding documentation clk: add Ingenic jz4780 CGU driver MIPS: jz4740: add jz4780 interrupt controller support MIPS: add jz4780 Ingenic vendor ID MIPS: initial Ingenic jz4780 support MIPS: initial MIPS Creator CI20 board support MIPS: allow jz4780 to be selected in Kconfig .../bindings/clock/ingenic,jz4740-cgu.txt | 52 ++ .../bindings/clock/ingenic,jz4780-cgu.txt | 52 ++ .../interrupt-controller/ingenic,jz4740-intc.txt | 26 + .../bindings/serial/ingenic,jz4740-uart.txt | 22 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/mips/Kconfig | 22 +- arch/mips/boot/dts/Makefile | 2 + arch/mips/boot/dts/ci20.dts | 21 + arch/mips/boot/dts/jz4740.dtsi | 68 ++ arch/mips/boot/dts/jz4780.dtsi | 101 +++ arch/mips/boot/dts/qi_lb60.dts | 15 + arch/mips/configs/ci20_defconfig | 127 +++ arch/mips/configs/qi_lb60_defconfig | 1 + arch/mips/include/asm/Kbuild | 1 - arch/mips/include/asm/cpu.h | 1 + arch/mips/include/asm/mach-generic/serial.h | 21 + arch/mips/include/asm/mach-jz4740/clock.h | 3 + arch/mips/include/asm/mach-jz4740/irq.h | 15 +- arch/mips/include/asm/mach-jz4740/platform.h | 2 - arch/mips/include/asm/mach-jz4740/serial.h | 27 + arch/mips/include/asm/serial.h | 21 + arch/mips/jz4740/Kconfig | 10 + arch/mips/jz4740/Makefile | 6 +- arch/mips/jz4740/Platform | 4 + arch/mips/jz4740/board-qi_lb60.c | 7 - arch/mips/jz4740/clock-debugfs.c | 108 --- arch/mips/jz4740/clock.c | 924 --------------------- arch/mips/jz4740/clock.h | 76 -- arch/mips/jz4740/irq.c | 103 ++- arch/mips/jz4740/platform.c | 37 +- arch/mips/jz4740/pm.c | 2 - arch/mips/jz4740/prom.c | 13 - arch/mips/jz4740/reset.c | 13 +- arch/mips/jz4740/serial.c | 33 - arch/mips/jz4740/serial.h | 23 - arch/mips/jz4740/setup.c | 33 +- arch/mips/jz4740/time.c | 19 +- arch/mips/kernel/cpu-probe.c | 1 + arch/mips/kernel/irq_cpu.c | 3 + drivers/clk/Makefile | 2 + drivers/clk/jz47xx/Makefile | 3 + drivers/clk/jz47xx/jz4740-cgu.c | 295 +++++++ drivers/clk/jz47xx/jz4780-cgu.c | 742 +++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.c | 723 ++++++++++++++++ drivers/clk/jz47xx/jz47xx-cgu.h | 205 +++++ drivers/tty/serial/8250/8250_jz47xx.c | 225 +++++ drivers/tty/serial/8250/Kconfig | 9 + drivers/tty/serial/8250/Makefile | 1 + include/dt-bindings/clock/jz4740-cgu.h | 37 + include/dt-bindings/clock/jz4780-cgu.h | 88 ++ 50 files changed, 3070 insertions(+), 1276 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4740-cgu.txt create mode 100644 Documentation/devicetree/bindings/clock/ingenic,jz4780-cgu.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,jz4740-intc.txt create mode 100644 Documentation/devicetree/bindings/serial/ingenic,jz4740-uart.txt create mode 100644 arch/mips/boot/dts/ci20.dts create mode 100644 arch/mips/boot/dts/jz4740.dtsi create mode 100644 arch/mips/boot/dts/jz4780.dtsi create mode 100644 arch/mips/boot/dts/qi_lb60.dts create mode 100644 arch/mips/configs/ci20_defconfig create mode 100644 arch/mips/include/asm/mach-generic/serial.h create mode 100644 arch/mips/include/asm/mach-jz4740/serial.h create mode 100644 arch/mips/include/asm/serial.h delete mode 100644 arch/mips/jz4740/clock-debugfs.c delete mode 100644 arch/mips/jz4740/clock.c delete mode 100644 arch/mips/jz4740/clock.h delete mode 100644 arch/mips/jz4740/serial.c delete mode 100644 arch/mips/jz4740/serial.h create mode 100644 drivers/clk/jz47xx/Makefile create mode 100644 drivers/clk/jz47xx/jz4740-cgu.c create mode 100644 drivers/clk/jz47xx/jz4780-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.c create mode 100644 drivers/clk/jz47xx/jz47xx-cgu.h create mode 100644 drivers/tty/serial/8250/8250_jz47xx.c create mode 100644 include/dt-bindings/clock/jz4740-cgu.h create mode 100644 include/dt-bindings/clock/jz4780-cgu.h -- 1.9.1
next reply other threads:[~2015-02-04 15:22 UTC|newest] Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-02-04 15:21 Zubair Lutfullah Kakakhel [this message] 2015-02-04 15:21 ` [PATCH_V2 00/34] jz4780 & CI20 support Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 01/34] dt: Add Ingenic Semiconductor vendor prefix Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 02/34] MIPS: jz4740: require & include DT Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 03/34] MIPS: irq_cpu: declare irqchip table entry Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 04/34] MIPS: jz4740: probe CPU interrupt controller via DT Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 17:05 ` Sergei Shtylyov 2015-02-04 15:21 ` [PATCH_V2 05/34] MIPS: jz4740: use generic plat_irq_dispatch Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 06/34] MIPS: jz4740: move arch_init_irq out of arch/mips/jz4740/irq.c Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 07/34] dt: interrupt-controller: Add ingenic,jz4740-intc binding doc Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 17:07 ` Sergei Shtylyov 2015-02-04 15:21 ` [PATCH_V2 08/34] MIPS: jz4740: allow interrupt controller probe via DT Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 09/34] MIPS: jz4740: probe interrupt controller " Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 17:09 ` Sergei Shtylyov 2015-02-04 15:21 ` [PATCH_V2 10/34] MIPS: jz4740: remove non-DT interrupt controller init Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 11/34] MIPS: jz4740: register an irq_domain for the interrupt controller Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 16:19 ` Arnd Bergmann 2015-02-04 16:19 ` Arnd Bergmann 2015-02-04 15:21 ` [PATCH_V2 12/34] MIPS: jz4740: call jz4740_clock_init earlier Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 13/34] MIPS: jz4740: replace use of jz4740_clock_bdata Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 14/34] clk: jz47xx-cgu: add driver for Ingenic jz47xx series CGU clocks Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 15/34] dt: clk: Add ingenic,jz4740-cgu binding documentation Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 16:27 ` Arnd Bergmann 2015-02-04 15:21 ` [PATCH_V2 16/34] MIPS: clk: migrate jz4740 to common clock framework Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 17/34] MIPS: clk: move jz4740_clock_set_wait_mode to jz4740-cgu Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 18/34] MIPS: clk: move jz4740 UDC auto suspend functions " Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 19/34] MIPS: clk: move jz4740 clock suspend, resume " Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 20/34] MIPS: jz4740: remove clock.h Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 21/34] MIPS: jz4740: only detect RAM size if not specified in DT Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 22/34] MIPS: jz4740: support >32 interrupts Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 23/34] MIPS: jz4740: define IRQ numbers based on number of intc IRQs Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 24/34] dt: serial: Add ingenic,jz4740-uart binding Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 25/34] serial: 8250_jz47xx: support for Ingenic jz47xx UARTs Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 21:02 ` Paul Bolle 2015-02-04 15:21 ` [PATCH_V2 26/34] MIPS: allow mach-provided serial.h Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 27/34] MIPS: jz4740: use jz47xx-uart & DT for UART output Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 16:32 ` Arnd Bergmann 2015-02-04 16:32 ` Arnd Bergmann 2015-02-04 15:21 ` [PATCH_V2 28/34] dt: clk: Add ingenic,jz4780-cgu binding documentation Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 29/34] clk: add Ingenic jz4780 CGU driver Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` [PATCH_V2 30/34] MIPS: jz4740: add jz4780 interrupt controller support Zubair Lutfullah Kakakhel 2015-02-04 15:21 ` Zubair Lutfullah Kakakhel 2015-02-04 15:22 ` [PATCH_V2 31/34] MIPS: add jz4780 Ingenic vendor ID Zubair Lutfullah Kakakhel 2015-02-04 15:22 ` Zubair Lutfullah Kakakhel 2015-02-04 15:22 ` [PATCH_V2 32/34] MIPS: initial Ingenic jz4780 support Zubair Lutfullah Kakakhel 2015-02-04 15:22 ` Zubair Lutfullah Kakakhel 2015-02-04 15:22 ` [PATCH_V2 33/34] MIPS: initial MIPS Creator CI20 board support Zubair Lutfullah Kakakhel 2015-02-04 15:22 ` Zubair Lutfullah Kakakhel 2015-02-04 20:56 ` Paul Bolle 2015-02-04 20:56 ` Paul Bolle 2015-02-04 15:22 ` [PATCH_V2 34/34] MIPS: allow jz4780 to be selected in Kconfig Zubair Lutfullah Kakakhel 2015-02-04 15:22 ` Zubair Lutfullah Kakakhel 2015-02-04 16:47 ` [PATCH_V2 00/34] jz4780 & CI20 support Paul Burton 2015-02-04 16:47 ` Paul Burton
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1423063323-19419-1-git-send-email-Zubair.Kakakhel@imgtec.com \ --to=zubair.kakakhel@imgtec.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jason@lakedaemon.net \ --cc=jslaby@suse.cz \ --cc=lars@metafoo.de \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@linux-mips.org \ --cc=linux-serial@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=paul.burton@imgtec.com \ --cc=ralf@linux-mips.org \ --cc=sboyd@codeaurora.org \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.