Re: [PATCH v7 2/6] mfd: syscon: add a DT property to set value width

[Damien Riegel <damien.riegel@savoirfairelinux.com>]

On Mon, Dec 07, 2015 at 09:40:20AM +0000, Lee Jones wrote:
> On Mon, 30 Nov 2015, Damien Riegel wrote:
> 
> > Currently syscon has a fixed configuration of 32 bits for register and
> > values widths. In some cases, it would be desirable to be able to
> > customize the value width.
> > 
> > For example, certain boards (like the ones manufactured by Technologic
> > Systems) have a FPGA that is memory-mapped, but its registers are only
> > 16-bit wide.
> > 
> > This patch adds an optional "reg-io-width" DT binding for syscon that
> > allows to change the width for the data bus (i.e. val_bits). If this
> > property is provided, it will also set the register stride to
> > reg-io-width's value. If not provided, the default configuration is
> > used.
> > 
> > Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
> > ---
> >  Documentation/devicetree/bindings/mfd/syscon.txt |  4 ++++
> >  drivers/mfd/syscon.c                             | 13 +++++++++++++
> >  2 files changed, 17 insertions(+)
> 
> Applied, thanks.
> 
Hi Lee,

Good to see this patch applied. What's going on now with the other
patches of this serie ? How should I handle them ?

Thanks,
Damien

> > diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt
> > index fe8150b..408f768 100644
> > --- a/Documentation/devicetree/bindings/mfd/syscon.txt
> > +++ b/Documentation/devicetree/bindings/mfd/syscon.txt
> > @@ -13,6 +13,10 @@ Required properties:
> >  - compatible: Should contain "syscon".
> >  - reg: the register region can be accessed from syscon
> >  
> > +Optional property:
> > +- reg-io-width: the size (in bytes) of the IO accesses that should be
> > +  performed on the device.
> > +
> >  Examples:
> >  gpr: iomuxc-gpr@020e0000 {
> >  	compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
> > diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
> > index 176bf0f..b7aabee 100644
> > --- a/drivers/mfd/syscon.c
> > +++ b/drivers/mfd/syscon.c
> > @@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
> >  	struct syscon *syscon;
> >  	struct regmap *regmap;
> >  	void __iomem *base;
> > +	u32 reg_io_width;
> >  	int ret;
> >  	struct regmap_config syscon_config = syscon_regmap_config;
> >  
> > @@ -69,6 +70,18 @@ static struct syscon *of_syscon_register(struct device_node *np)
> >  	 else if (of_property_read_bool(np, "little-endian"))
> >  		syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
> >  
> > +	/*
> > +	 * search for reg-io-width property in DT. If it is not provided,
> > +	 * default to 4 bytes. regmap_init_mmio will return an error if values
> > +	 * are invalid so there is no need to check them here.
> > +	 */
> > +	ret = of_property_read_u32(np, "reg-io-width", &reg_io_width);
> > +	if (ret)
> > +		reg_io_width = 4;
> > +
> > +	syscon_config.reg_stride = reg_io_width;
> > +	syscon_config.val_bits = reg_io_width * 8;
> > +
> >  	regmap = regmap_init_mmio(NULL, base, &syscon_config);
> >  	if (IS_ERR(regmap)) {
> >  		pr_err("regmap init failed\n");
> 
> -- 
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog