From: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> To: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>, Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>, Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> Subject: Re: [PATCH v2] ARM: dts: imx7d: cl-som-imx7: add basic module support Date: Mon, 14 Dec 2015 10:43:15 +0800 [thread overview] Message-ID: <20151214024315.GC25756@tiger> (raw) In-Reply-To: <1449756097-2921-1-git-send-email-grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> On Thu, Dec 10, 2015 at 04:01:37PM +0200, Igor Grinberg wrote: > From: Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> > > CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on > Freescale i.MX7 System-on-Chip family. > > http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ > > Add basic DT support for standalone module (without a carrier board): > > * Memory configuration > * I2C2 bus > * PMIC > * UART1 > > Signed-off-by: Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> > Signed-off-by: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> > Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> > --- > > v2: use generic node name for pmic (Thanks Rob). > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 150 ++++++++++++++++++++++++++ > 3 files changed, 155 insertions(+) > create mode 100644 arch/arm/boot/dts/imx7d-cl-som-imx7.dts > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt > index 34c88b0..30b0ba1 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.txt > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board > Required root node properties: > - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; > > +i.MX7D CL-SOM-iMX7 Board > +Required root node properties: > + - compatible = "compulab,cl-som-imx7", "fsl,imx7d"; > + This is not a board produced by FSL, so it should be documented in fsl.txt. > Generic i.MX boards > ------------------- > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 30bbc37..83ed521 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -350,6 +350,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ > dtb-$(CONFIG_SOC_IMX6UL) += \ > imx6ul-14x14-evk.dtb > dtb-$(CONFIG_SOC_IMX7D) += \ > + imx7d-cl-som-imx7.dtb \ > imx7d-sdb.dtb > dtb-$(CONFIG_SOC_LS1021A) += \ > ls1021a-qds.dtb \ > diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts > new file mode 100644 > index 0000000..ba05198 > --- /dev/null > +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts > @@ -0,0 +1,150 @@ > +/* > + * Support for CompuLab CL-SOM-iMX7 System-on-Module > + * > + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ > + * Author: Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published by > + * the Free Software Foundation. > + */ GPL/X11 dual licence is generally suggested for newly added dts files, as it will let non-Linux OS use them. > + > +/dts-v1/; > + > +#include <dt-bindings/input/input.h> > +#include "imx7d.dtsi" > + > +/ { > + model = "CompuLab CL-SOM-iMX7"; > + compatible = "compulab,cl-som-imx7", "fsl,imx7d"; > + > + memory { > + reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ > + }; > +}; > + > +&cpu0 { > + arm-supply = <&sw1a_reg>; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + pmic: pmic@8 { > + compatible = "fsl,pfuze3000"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1a { > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1475000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + /* use sw1c_reg to align with pfuze100/pfuze200 */ > + sw1c_reg: sw1b { > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1475000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw2_reg: sw2 { > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1850000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3a_reg: sw3 { > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1650000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen1_reg: vldo1 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen2_reg: vldo2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen3_reg: vccsd { > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen4_reg: v33 { > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen5_reg: vldo3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen6_reg: vldo4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > + status = "okay"; > +}; > + > +&iomuxc { > + cl-som-imx7 { Since commit (5fcdf6a7ed95 pinctrl: imx: Allow parsing DT without function nodes), this level of container node is not really needed any more. Shawn > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f > + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 > + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 > + >; > + }; > + }; > +}; > -- > 2.4.10 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: shawnguo@kernel.org (Shawn Guo) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2] ARM: dts: imx7d: cl-som-imx7: add basic module support Date: Mon, 14 Dec 2015 10:43:15 +0800 [thread overview] Message-ID: <20151214024315.GC25756@tiger> (raw) In-Reply-To: <1449756097-2921-1-git-send-email-grinberg@compulab.co.il> On Thu, Dec 10, 2015 at 04:01:37PM +0200, Igor Grinberg wrote: > From: Ilya Ledvich <ilya@compulab.co.il> > > CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on > Freescale i.MX7 System-on-Chip family. > > http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/ > > Add basic DT support for standalone module (without a carrier board): > > * Memory configuration > * I2C2 bus > * PMIC > * UART1 > > Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> > Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> > Acked-by: Rob Herring <robh@kernel.org> > --- > > v2: use generic node name for pmic (Thanks Rob). > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 150 ++++++++++++++++++++++++++ > 3 files changed, 155 insertions(+) > create mode 100644 arch/arm/boot/dts/imx7d-cl-som-imx7.dts > > diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt > index 34c88b0..30b0ba1 100644 > --- a/Documentation/devicetree/bindings/arm/fsl.txt > +++ b/Documentation/devicetree/bindings/arm/fsl.txt > @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board > Required root node properties: > - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; > > +i.MX7D CL-SOM-iMX7 Board > +Required root node properties: > + - compatible = "compulab,cl-som-imx7", "fsl,imx7d"; > + This is not a board produced by FSL, so it should be documented in fsl.txt. > Generic i.MX boards > ------------------- > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 30bbc37..83ed521 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -350,6 +350,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ > dtb-$(CONFIG_SOC_IMX6UL) += \ > imx6ul-14x14-evk.dtb > dtb-$(CONFIG_SOC_IMX7D) += \ > + imx7d-cl-som-imx7.dtb \ > imx7d-sdb.dtb > dtb-$(CONFIG_SOC_LS1021A) += \ > ls1021a-qds.dtb \ > diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts > new file mode 100644 > index 0000000..ba05198 > --- /dev/null > +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts > @@ -0,0 +1,150 @@ > +/* > + * Support for CompuLab CL-SOM-iMX7 System-on-Module > + * > + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ > + * Author: Ilya Ledvich <ilya@compulab.co.il> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published by > + * the Free Software Foundation. > + */ GPL/X11 dual licence is generally suggested for newly added dts files, as it will let non-Linux OS use them. > + > +/dts-v1/; > + > +#include <dt-bindings/input/input.h> > +#include "imx7d.dtsi" > + > +/ { > + model = "CompuLab CL-SOM-iMX7"; > + compatible = "compulab,cl-som-imx7", "fsl,imx7d"; > + > + memory { > + reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ > + }; > +}; > + > +&cpu0 { > + arm-supply = <&sw1a_reg>; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + pmic: pmic at 8 { > + compatible = "fsl,pfuze3000"; > + reg = <0x08>; > + > + regulators { > + sw1a_reg: sw1a { > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1475000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + /* use sw1c_reg to align with pfuze100/pfuze200 */ > + sw1c_reg: sw1b { > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1475000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <6250>; > + }; > + > + sw2_reg: sw2 { > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1850000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + sw3a_reg: sw3 { > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <1650000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + swbst_reg: swbst { > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5150000>; > + }; > + > + snvs_reg: vsnvs { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <3000000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vref_reg: vrefddr { > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vgen1_reg: vldo1 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen2_reg: vldo2 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1550000>; > + }; > + > + vgen3_reg: vccsd { > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen4_reg: v33 { > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen5_reg: vldo3 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vgen6_reg: vldo4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; > + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; > + status = "okay"; > +}; > + > +&iomuxc { > + cl-som-imx7 { Since commit (5fcdf6a7ed95 pinctrl: imx: Allow parsing DT without function nodes), this level of container node is not really needed any more. Shawn > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f > + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 > + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 > + >; > + }; > + }; > +}; > -- > 2.4.10 > >
next prev parent reply other threads:[~2015-12-14 2:43 UTC|newest] Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-07 7:14 [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich [not found] ` <1449472479-2521-1-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-07 7:14 ` [PATCH 1/8] ARM: dts: imx7d: cl-som-imx7: add basic module support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich [not found] ` <1449472479-2521-2-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-08 15:14 ` Rob Herring 2015-12-08 15:14 ` Rob Herring 2015-12-10 14:01 ` [PATCH v2] " Igor Grinberg 2015-12-10 14:01 ` Igor Grinberg [not found] ` <1449756097-2921-1-git-send-email-grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-14 2:43 ` Shawn Guo [this message] 2015-12-14 2:43 ` Shawn Guo 2015-12-16 14:01 ` Igor Grinberg 2015-12-16 14:01 ` Igor Grinberg [not found] ` <56716EA4.2080107-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-21 6:36 ` Shawn Guo 2015-12-21 6:36 ` Shawn Guo 2015-12-21 8:07 ` Igor Grinberg 2015-12-21 8:07 ` Igor Grinberg [not found] ` <5677B341.6040203-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-21 13:54 ` Shawn Guo 2015-12-21 13:54 ` Shawn Guo 2015-12-21 13:59 ` Shawn Guo 2015-12-21 13:59 ` Shawn Guo 2015-12-22 7:38 ` Igor Grinberg 2015-12-22 7:38 ` Igor Grinberg 2015-12-07 7:14 ` [PATCH 2/8] ARM: dts: imx7d: cl-som-imx7: add usb otg support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 3/8] ARM: dts: imx7d: cl-som-imx7: add eMMC support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 4/8] ARM: dts: imx7d: cl-som-imx7: add fec1 support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 5/8] ARM: dts: imx7d: cl-som-imx7: add eeprom support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 6/8] ARM: dts: imx7d: cl-som-imx7: add gpio extender support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 7/8] ARM: dts: imx7d: cl-som-imx7: add fec2 support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 8/8] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich [not found] ` <1449472479-2521-9-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-08 15:16 ` Rob Herring 2015-12-08 15:16 ` Rob Herring 2015-12-14 2:47 ` [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo 2015-12-14 2:47 ` Shawn Guo 2015-12-16 14:09 ` Igor Grinberg 2015-12-16 14:09 ` Igor Grinberg [not found] ` <5671707E.5000908-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-21 6:41 ` Shawn Guo 2015-12-21 6:41 ` Shawn Guo 2015-12-21 7:54 ` Igor Grinberg 2015-12-21 7:54 ` Igor Grinberg 2015-12-22 8:15 ` [PATCH v2 0/2] " Ilya Ledvich 2015-12-22 8:15 ` Ilya Ledvich [not found] ` <1450772120-18131-1-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-22 8:15 ` [PATCH v2 1/2] ARM: dts: imx7d: cl-som-imx7: add basic module support Ilya Ledvich 2015-12-22 8:15 ` Ilya Ledvich [not found] ` <1450772120-18131-2-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-22 12:17 ` Shawn Guo 2015-12-22 12:17 ` Shawn Guo 2015-12-22 14:07 ` Igor Grinberg 2015-12-22 14:07 ` Igor Grinberg 2015-12-22 8:15 ` [PATCH v2 2/2] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich 2015-12-22 8:15 ` Ilya Ledvich [not found] ` <1450772120-18131-3-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-22 12:19 ` Shawn Guo 2015-12-22 12:19 ` Shawn Guo 2015-12-22 14:13 ` Igor Grinberg 2015-12-22 14:13 ` Igor Grinberg 2015-12-22 12:13 ` [PATCH v2 0/2] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo 2015-12-22 12:13 ` Shawn Guo 2015-12-22 14:14 ` Igor Grinberg 2015-12-22 14:14 ` Igor Grinberg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20151214024315.GC25756@tiger \ --to=shawnguo-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \ --cc=grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \ --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \ --cc=ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \ --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.