From: Igor Grinberg <grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> To: Shawn Guo <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Ilya Ledvich <ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>, Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>, Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Subject: Re: [PATCH v2 1/2] ARM: dts: imx7d: cl-som-imx7: add basic module support Date: Tue, 22 Dec 2015 16:07:51 +0200 [thread overview] Message-ID: <56795937.6090903@compulab.co.il> (raw) In-Reply-To: <20151222121718.GB26290@tiger> Hi Shawn, On 12/22/15 14:17, Shawn Guo wrote: > On Tue, Dec 22, 2015 at 10:15:19AM +0200, Ilya Ledvich wrote: [...] >> +/ { >> + model = "CompuLab CL-SOM-iMX7"; >> + compatible = "compulab,cl-som-imx7", "fsl,imx7d"; >> + >> + memory { >> + reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ >> + }; >> + >> + regulators { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <0>; > > DT maintainers dislike this fake "simple-bus" container, and we were > asked to put fixed regulator directly under root. I fixed it up like > below: > > reg_usb_otg1_vbus: regulator-vbus { > compatible = "regulator-fixed"; > regulator-name = "usb_otg1_vbus"; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; > enable-active-high; > }; > Looks good! Thanks for adjusting this. [...] -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: grinberg@compulab.co.il (Igor Grinberg) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 1/2] ARM: dts: imx7d: cl-som-imx7: add basic module support Date: Tue, 22 Dec 2015 16:07:51 +0200 [thread overview] Message-ID: <56795937.6090903@compulab.co.il> (raw) In-Reply-To: <20151222121718.GB26290@tiger> Hi Shawn, On 12/22/15 14:17, Shawn Guo wrote: > On Tue, Dec 22, 2015 at 10:15:19AM +0200, Ilya Ledvich wrote: [...] >> +/ { >> + model = "CompuLab CL-SOM-iMX7"; >> + compatible = "compulab,cl-som-imx7", "fsl,imx7d"; >> + >> + memory { >> + reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */ >> + }; >> + >> + regulators { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <0>; > > DT maintainers dislike this fake "simple-bus" container, and we were > asked to put fixed regulator directly under root. I fixed it up like > below: > > reg_usb_otg1_vbus: regulator-vbus { > compatible = "regulator-fixed"; > regulator-name = "usb_otg1_vbus"; > regulator-min-microvolt = <5000000>; > regulator-max-microvolt = <5000000>; > gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; > enable-active-high; > }; > Looks good! Thanks for adjusting this. [...] -- Regards, Igor.
next prev parent reply other threads:[~2015-12-22 14:07 UTC|newest] Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-12-07 7:14 [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich [not found] ` <1449472479-2521-1-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-07 7:14 ` [PATCH 1/8] ARM: dts: imx7d: cl-som-imx7: add basic module support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich [not found] ` <1449472479-2521-2-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-08 15:14 ` Rob Herring 2015-12-08 15:14 ` Rob Herring 2015-12-10 14:01 ` [PATCH v2] " Igor Grinberg 2015-12-10 14:01 ` Igor Grinberg [not found] ` <1449756097-2921-1-git-send-email-grinberg-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-14 2:43 ` Shawn Guo 2015-12-14 2:43 ` Shawn Guo 2015-12-16 14:01 ` Igor Grinberg 2015-12-16 14:01 ` Igor Grinberg [not found] ` <56716EA4.2080107-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-21 6:36 ` Shawn Guo 2015-12-21 6:36 ` Shawn Guo 2015-12-21 8:07 ` Igor Grinberg 2015-12-21 8:07 ` Igor Grinberg [not found] ` <5677B341.6040203-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-21 13:54 ` Shawn Guo 2015-12-21 13:54 ` Shawn Guo 2015-12-21 13:59 ` Shawn Guo 2015-12-21 13:59 ` Shawn Guo 2015-12-22 7:38 ` Igor Grinberg 2015-12-22 7:38 ` Igor Grinberg 2015-12-07 7:14 ` [PATCH 2/8] ARM: dts: imx7d: cl-som-imx7: add usb otg support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 3/8] ARM: dts: imx7d: cl-som-imx7: add eMMC support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 4/8] ARM: dts: imx7d: cl-som-imx7: add fec1 support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 5/8] ARM: dts: imx7d: cl-som-imx7: add eeprom support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 6/8] ARM: dts: imx7d: cl-som-imx7: add gpio extender support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 7/8] ARM: dts: imx7d: cl-som-imx7: add fec2 support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich 2015-12-07 7:14 ` [PATCH 8/8] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich 2015-12-07 7:14 ` Ilya Ledvich [not found] ` <1449472479-2521-9-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-08 15:16 ` Rob Herring 2015-12-08 15:16 ` Rob Herring 2015-12-14 2:47 ` [PATCH 0/8] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo 2015-12-14 2:47 ` Shawn Guo 2015-12-16 14:09 ` Igor Grinberg 2015-12-16 14:09 ` Igor Grinberg [not found] ` <5671707E.5000908-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-21 6:41 ` Shawn Guo 2015-12-21 6:41 ` Shawn Guo 2015-12-21 7:54 ` Igor Grinberg 2015-12-21 7:54 ` Igor Grinberg 2015-12-22 8:15 ` [PATCH v2 0/2] " Ilya Ledvich 2015-12-22 8:15 ` Ilya Ledvich [not found] ` <1450772120-18131-1-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-22 8:15 ` [PATCH v2 1/2] ARM: dts: imx7d: cl-som-imx7: add basic module support Ilya Ledvich 2015-12-22 8:15 ` Ilya Ledvich [not found] ` <1450772120-18131-2-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-22 12:17 ` Shawn Guo 2015-12-22 12:17 ` Shawn Guo 2015-12-22 14:07 ` Igor Grinberg [this message] 2015-12-22 14:07 ` Igor Grinberg 2015-12-22 8:15 ` [PATCH v2 2/2] ARM: dts: imx7d: sbc-imx7: add basic board support Ilya Ledvich 2015-12-22 8:15 ` Ilya Ledvich [not found] ` <1450772120-18131-3-git-send-email-ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org> 2015-12-22 12:19 ` Shawn Guo 2015-12-22 12:19 ` Shawn Guo 2015-12-22 14:13 ` Igor Grinberg 2015-12-22 14:13 ` Igor Grinberg 2015-12-22 12:13 ` [PATCH v2 0/2] Add support for CL-SOM-iMX7 and SBC-iMX7 Shawn Guo 2015-12-22 12:13 ` Shawn Guo 2015-12-22 14:14 ` Igor Grinberg 2015-12-22 14:14 ` Igor Grinberg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=56795937.6090903@compulab.co.il \ --to=grinberg-utxizqzc01rs1mouv/rt9w@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \ --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \ --cc=ilya-UTxiZqZC01RS1MOuV/RT9w@public.gmane.org \ --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \ --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.